diff options
Diffstat (limited to 'drivers/net/wireless/wl1251/cmd.h')
| -rw-r--r-- | drivers/net/wireless/wl1251/cmd.h | 415 | 
1 files changed, 0 insertions, 415 deletions
diff --git a/drivers/net/wireless/wl1251/cmd.h b/drivers/net/wireless/wl1251/cmd.h deleted file mode 100644 index e5c74c63137..00000000000 --- a/drivers/net/wireless/wl1251/cmd.h +++ /dev/null @@ -1,415 +0,0 @@ -/* - * This file is part of wl1251 - * - * Copyright (c) 1998-2007 Texas Instruments Incorporated - * Copyright (C) 2008 Nokia Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1251_CMD_H__ -#define __WL1251_CMD_H__ - -#include "wl1251.h" - -#include <net/cfg80211.h> - -struct acx_header; - -int wl1251_cmd_send(struct wl1251 *wl, u16 type, void *buf, size_t buf_len); -int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer); -int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len); -int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len); -int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity, -		   void *bitmap, u16 bitmap_len, u8 bitmap_control); -int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable); -int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel, -		    u16 beacon_interval, u8 dtim_interval); -int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode); -int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer, -			   size_t len); -int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id, -			    void *buf, size_t buf_len); -int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len, -		    struct ieee80211_channel *channels[], -		    unsigned int n_channels, unsigned int n_probes); -int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout); - -/* unit ms */ -#define WL1251_COMMAND_TIMEOUT 2000 - -enum wl1251_commands { -	CMD_RESET           = 0, -	CMD_INTERROGATE     = 1,    /*use this to read information elements*/ -	CMD_CONFIGURE       = 2,    /*use this to write information elements*/ -	CMD_ENABLE_RX       = 3, -	CMD_ENABLE_TX       = 4, -	CMD_DISABLE_RX      = 5, -	CMD_DISABLE_TX      = 6, -	CMD_SCAN            = 8, -	CMD_STOP_SCAN       = 9, -	CMD_VBM             = 10, -	CMD_START_JOIN      = 11, -	CMD_SET_KEYS        = 12, -	CMD_READ_MEMORY     = 13, -	CMD_WRITE_MEMORY    = 14, -	CMD_BEACON          = 19, -	CMD_PROBE_RESP      = 20, -	CMD_NULL_DATA       = 21, -	CMD_PROBE_REQ       = 22, -	CMD_TEST            = 23, -	CMD_RADIO_CALIBRATE     = 25,   /* OBSOLETE */ -	CMD_ENABLE_RX_PATH      = 27,   /* OBSOLETE */ -	CMD_NOISE_HIST      = 28, -	CMD_RX_RESET        = 29, -	CMD_PS_POLL         = 30, -	CMD_QOS_NULL_DATA   = 31, -	CMD_LNA_CONTROL     = 32, -	CMD_SET_BCN_MODE    = 33, -	CMD_MEASUREMENT      = 34, -	CMD_STOP_MEASUREMENT = 35, -	CMD_DISCONNECT       = 36, -	CMD_SET_PS_MODE      = 37, -	CMD_CHANNEL_SWITCH   = 38, -	CMD_STOP_CHANNEL_SWICTH = 39, -	CMD_AP_DISCOVERY     = 40, -	CMD_STOP_AP_DISCOVERY = 41, -	CMD_SPS_SCAN = 42, -	CMD_STOP_SPS_SCAN = 43, -	CMD_HEALTH_CHECK     = 45, -	CMD_DEBUG            = 46, -	CMD_TRIGGER_SCAN_TO  = 47, - -	NUM_COMMANDS, -	MAX_COMMAND_ID = 0xFFFF, -}; - -#define MAX_CMD_PARAMS 572 - -struct wl1251_cmd_header { -	u16 id; -	u16 status; -	/* payload */ -	u8 data[0]; -} __packed; - -struct  wl1251_command { -	struct wl1251_cmd_header header; -	u8  parameters[MAX_CMD_PARAMS]; -} __packed; - -enum { -	CMD_MAILBOX_IDLE              		=  0, -	CMD_STATUS_SUCCESS            		=  1, -	CMD_STATUS_UNKNOWN_CMD        		=  2, -	CMD_STATUS_UNKNOWN_IE         		=  3, -	CMD_STATUS_REJECT_MEAS_SG_ACTIVE 	= 11, -	CMD_STATUS_RX_BUSY            		= 13, -	CMD_STATUS_INVALID_PARAM      		= 14, -	CMD_STATUS_TEMPLATE_TOO_LARGE 		= 15, -	CMD_STATUS_OUT_OF_MEMORY      		= 16, -	CMD_STATUS_STA_TABLE_FULL     		= 17, -	CMD_STATUS_RADIO_ERROR        		= 18, -	CMD_STATUS_WRONG_NESTING      		= 19, -	CMD_STATUS_TIMEOUT            		= 21, /* Driver internal use.*/ -	CMD_STATUS_FW_RESET           		= 22, /* Driver internal use.*/ -	MAX_COMMAND_STATUS            		= 0xff -}; - - -/* - * CMD_READ_MEMORY - * - * The host issues this command to read the WiLink device memory/registers. - * - * Note: The Base Band address has special handling (16 bits registers and - * addresses). For more information, see the hardware specification. - */ -/* - * CMD_WRITE_MEMORY - * - * The host issues this command to write the WiLink device memory/registers. - * - * The Base Band address has special handling (16 bits registers and - * addresses). For more information, see the hardware specification. - */ -#define MAX_READ_SIZE 256 - -struct cmd_read_write_memory { -	struct wl1251_cmd_header header; - -	/* The address of the memory to read from or write to.*/ -	u32 addr; - -	/* The amount of data in bytes to read from or write to the WiLink -	 * device.*/ -	u32 size; - -	/* The actual value read from or written to the Wilink. The source -	   of this field is the Host in WRITE command or the Wilink in READ -	   command. */ -	u8 value[MAX_READ_SIZE]; -} __packed; - -#define CMDMBOX_HEADER_LEN 4 -#define CMDMBOX_INFO_ELEM_HEADER_LEN 4 - -#define WL1251_SCAN_MIN_DURATION 30000 -#define WL1251_SCAN_MAX_DURATION 60000 - -#define WL1251_SCAN_NUM_PROBES 3 - -struct wl1251_scan_parameters { -	__le32 rx_config_options; -	__le32 rx_filter_options; - -	/* -	 * Scan options: -	 * bit 0: When this bit is set, passive scan. -	 * bit 1: Band, when this bit is set we scan -	 * in the 5Ghz band. -	 * bit 2: voice mode, 0 for normal scan. -	 * bit 3: scan priority, 1 for high priority. -	 */ -	__le16 scan_options; - -	/* Number of channels to scan */ -	u8 num_channels; - -	/* Number opf probe requests to send, per channel */ -	u8 num_probe_requests; - -	/* Rate and modulation for probe requests */ -	__le16 tx_rate; - -	u8 tid_trigger; -	u8 ssid_len; -	u8 ssid[32]; - -} __packed; - -struct wl1251_scan_ch_parameters { -	__le32 min_duration; /* in TU */ -	__le32 max_duration; /* in TU */ -	u32 bssid_lsb; -	u16 bssid_msb; - -	/* -	 * bits 0-3: Early termination count. -	 * bits 4-5: Early termination condition. -	 */ -	u8 early_termination; - -	u8 tx_power_att; -	u8 channel; -	u8 pad[3]; -} __packed; - -/* SCAN parameters */ -#define SCAN_MAX_NUM_OF_CHANNELS 16 - -struct wl1251_cmd_scan { -	struct wl1251_cmd_header header; - -	struct wl1251_scan_parameters params; -	struct wl1251_scan_ch_parameters channels[SCAN_MAX_NUM_OF_CHANNELS]; -} __packed; - -enum { -	BSS_TYPE_IBSS = 0, -	BSS_TYPE_STA_BSS = 2, -	BSS_TYPE_AP_BSS = 3, -	MAX_BSS_TYPE = 0xFF -}; - -#define JOIN_CMD_CTRL_TX_FLUSH             0x80 /* Firmware flushes all Tx */ -#define JOIN_CMD_CTRL_EARLY_WAKEUP_ENABLE  0x01 /* Early wakeup time */ - - -struct cmd_join { -	struct wl1251_cmd_header header; - -	u32 bssid_lsb; -	u16 bssid_msb; -	u16 beacon_interval; /* in TBTTs */ -	u32 rx_config_options; -	u32 rx_filter_options; - -	/* -	 * The target uses this field to determine the rate at -	 * which to transmit control frame responses (such as -	 * ACK or CTS frames). -	 */ -	u16 basic_rate_set; -	u8 dtim_interval; -	u8 tx_ctrl_frame_rate; /* OBSOLETE */ -	u8 tx_ctrl_frame_mod;  /* OBSOLETE */ -	/* -	 * bits 0-2: This bitwise field specifies the type -	 * of BSS to start or join (BSS_TYPE_*). -	 * bit 4: Band - The radio band in which to join -	 * or start. -	 *  0 - 2.4GHz band -	 *  1 - 5GHz band -	 * bits 3, 5-7: Reserved -	 */ -	u8 bss_type; -	u8 channel; -	u8 ssid_len; -	u8 ssid[IW_ESSID_MAX_SIZE]; -	u8 ctrl; /* JOIN_CMD_CTRL_* */ -	u8 tx_mgt_frame_rate; /* OBSOLETE */ -	u8 tx_mgt_frame_mod;  /* OBSOLETE */ -	u8 reserved; -} __packed; - -struct cmd_enabledisable_path { -	struct wl1251_cmd_header header; - -	u8 channel; -	u8 padding[3]; -} __packed; - -#define WL1251_MAX_TEMPLATE_SIZE 300 - -struct wl1251_cmd_packet_template { -	struct wl1251_cmd_header header; - -	__le16 size; -	u8 data[0]; -} __packed; - -#define TIM_ELE_ID    5 -#define PARTIAL_VBM_MAX    251 - -struct wl1251_tim { -	u8 identity; -	u8 length; -	u8 dtim_count; -	u8 dtim_period; -	u8 bitmap_ctrl; -	u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */ -} __packed; - -/* Virtual Bit Map update */ -struct wl1251_cmd_vbm_update { -	struct wl1251_cmd_header header; -	__le16 len; -	u8  padding[2]; -	struct wl1251_tim tim; -} __packed; - -enum wl1251_cmd_ps_mode { -	STATION_ACTIVE_MODE, -	STATION_POWER_SAVE_MODE -}; - -struct wl1251_cmd_ps_params { -	struct wl1251_cmd_header header; - -	u8 ps_mode; /* STATION_* */ -	u8 send_null_data; /* Do we have to send NULL data packet ? */ -	u8 retries; /* Number of retires for the initial NULL data packet */ - -	 /* -	  * TUs during which the target stays awake after switching -	  * to power save mode. -	  */ -	u8 hang_over_period; -	u16 null_data_rate; -	u8 pad[2]; -} __packed; - -struct wl1251_cmd_trigger_scan_to { -	struct wl1251_cmd_header header; - -	u32 timeout; -} __packed; - -/* HW encryption keys */ -#define NUM_ACCESS_CATEGORIES_COPY 4 -#define MAX_KEY_SIZE 32 - -/* When set, disable HW encryption */ -#define DF_ENCRYPTION_DISABLE      0x01 -/* When set, disable HW decryption */ -#define DF_SNIFF_MODE_ENABLE       0x80 - -enum wl1251_cmd_key_action { -	KEY_ADD_OR_REPLACE = 1, -	KEY_REMOVE         = 2, -	KEY_SET_ID         = 3, -	MAX_KEY_ACTION     = 0xffff, -}; - -enum wl1251_cmd_key_type { -	KEY_WEP_DEFAULT       = 0, -	KEY_WEP_ADDR          = 1, -	KEY_AES_GROUP         = 4, -	KEY_AES_PAIRWISE      = 5, -	KEY_WEP_GROUP         = 6, -	KEY_TKIP_MIC_GROUP    = 10, -	KEY_TKIP_MIC_PAIRWISE = 11, -}; - -/* - * - * key_type_e   key size    key format - * ----------   ---------   ---------- - * 0x00         5, 13, 29   Key data - * 0x01         5, 13, 29   Key data - * 0x04         16          16 bytes of key data - * 0x05         16          16 bytes of key data - * 0x0a         32          16 bytes of TKIP key data - *                          8 bytes of RX MIC key data - *                          8 bytes of TX MIC key data - * 0x0b         32          16 bytes of TKIP key data - *                          8 bytes of RX MIC key data - *                          8 bytes of TX MIC key data - * - */ - -struct wl1251_cmd_set_keys { -	struct wl1251_cmd_header header; - -	/* Ignored for default WEP key */ -	u8 addr[ETH_ALEN]; - -	/* key_action_e */ -	u16 key_action; - -	u16 reserved_1; - -	/* key size in bytes */ -	u8 key_size; - -	/* key_type_e */ -	u8 key_type; -	u8 ssid_profile; - -	/* -	 * TKIP, AES: frame's key id field. -	 * For WEP default key: key id; -	 */ -	u8 id; -	u8 reserved_2[6]; -	u8 key[MAX_KEY_SIZE]; -	u16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY]; -	u32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY]; -} __packed; - - -#endif /* __WL1251_CMD_H__ */  | 
