diff options
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8192se/hw.c')
| -rw-r--r-- | drivers/net/wireless/rtlwifi/rtl8192se/hw.c | 174 |
1 files changed, 108 insertions, 66 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c index 4542e6952b9..1c7101bcd79 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c @@ -251,7 +251,7 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) u8 e_aci = *val; rtl92s_dm_init_edca_turbo(hw); - if (rtlpci->acm_method != eAcmWay2_SW) + if (rtlpci->acm_method != EACMWAY2_SW) rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACM_CTRL, &e_aci); @@ -400,6 +400,37 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) break; } + case HW_VAR_FW_LPS_ACTION: { + bool enter_fwlps = *((bool *)val); + u8 rpwm_val, fw_pwrmode; + bool fw_current_inps; + + if (enter_fwlps) { + rpwm_val = 0x02; /* RF off */ + fw_current_inps = true; + rtlpriv->cfg->ops->set_hw_reg(hw, + HW_VAR_FW_PSMODE_STATUS, + (u8 *)(&fw_current_inps)); + rtlpriv->cfg->ops->set_hw_reg(hw, + HW_VAR_H2C_FW_PWRMODE, + &ppsc->fwctrl_psmode); + + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM, + &rpwm_val); + } else { + rpwm_val = 0x0C; /* RF on */ + fw_pwrmode = FW_PS_ACTIVE_MODE; + fw_current_inps = false; + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM, + &rpwm_val); + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE, + &fw_pwrmode); + + rtlpriv->cfg->ops->set_hw_reg(hw, + HW_VAR_FW_PSMODE_STATUS, + (u8 *)(&fw_current_inps)); + } + break; } default: RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "switch case not processed\n"); @@ -438,7 +469,7 @@ void rtl92se_enable_hw_security_config(struct ieee80211_hw *hw) } -static u8 _rtl92ce_halset_sysclk(struct ieee80211_hw *hw, u8 data) +static u8 _rtl92se_halset_sysclk(struct ieee80211_hw *hw, u8 data) { struct rtl_priv *rtlpriv = rtl_priv(hw); u8 waitcount = 100; @@ -547,7 +578,7 @@ static void _rtl92se_macconfig_before_fwdownload(struct ieee80211_hw *hw) tmpu1b &= ~(BIT(6) | BIT(7)); /* Set failed, return to prevent hang. */ - if (!_rtl92ce_halset_sysclk(hw, tmpu1b)) + if (!_rtl92se_halset_sysclk(hw, tmpu1b)) return; } @@ -650,7 +681,7 @@ static void _rtl92se_macconfig_before_fwdownload(struct ieee80211_hw *hw) tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1)); tmpu1b = ((tmpu1b | BIT(7)) & (~BIT(6))); - if (!_rtl92ce_halset_sysclk(hw, tmpu1b)) + if (!_rtl92se_halset_sysclk(hw, tmpu1b)) return; /* Set failed, return to prevent hang. */ rtl_write_word(rtlpriv, CMDR, 0x07FC); @@ -922,7 +953,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw) struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); u8 tmp_byte = 0; - + unsigned long flags; bool rtstatus = true; u8 tmp_u1b; int err = false; @@ -934,6 +965,16 @@ int rtl92se_hw_init(struct ieee80211_hw *hw) rtlpci->being_init_adapter = true; + /* As this function can take a very long time (up to 350 ms) + * and can be called with irqs disabled, reenable the irqs + * to let the other devices continue being serviced. + * + * It is safe doing so since our own interrupts will only be enabled + * in a subsequent step. + */ + local_save_flags(flags); + local_irq_enable(); + rtlpriv->intf_ops->disable_aspm(hw); /* 1. MAC Initialize */ @@ -951,7 +992,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw) RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, "Failed to download FW. Init HW without FW now... " "Please copy FW into /lib/firmware/rtlwifi\n"); - return 1; + err = 1; + goto exit; } /* After FW download, we have to reset MAC register */ @@ -964,9 +1006,19 @@ int rtl92se_hw_init(struct ieee80211_hw *hw) /* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */ if (!rtl92s_phy_mac_config(hw)) { RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n"); - return rtstatus; + err = rtstatus; + goto exit; } + /* because last function modify RCR, so we update + * rcr var here, or TP will unstable for receive_config + * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx + * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252 + */ + rtlpci->receive_config = rtl_read_dword(rtlpriv, RCR); + rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV); + rtl_write_dword(rtlpriv, RCR, rtlpci->receive_config); + /* Make sure BB/RF write OK. We should prevent enter IPS. radio off. */ /* We must set flag avoid BB/RF config period later!! */ rtl_write_dword(rtlpriv, CMDR, 0x37FC); @@ -974,7 +1026,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw) /* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */ if (!rtl92s_phy_bb_config(hw)) { RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n"); - return rtstatus; + err = rtstatus; + goto exit; } /* 5. Initiailze RF RAIO_A.txt RF RAIO_B.txt */ @@ -982,25 +1035,6 @@ int rtl92se_hw_init(struct ieee80211_hw *hw) rtlphy->rf_mode = RF_OP_BY_SW_3WIRE; - /* RF Power Save */ -#if 0 - /* H/W or S/W RF OFF before sleep. */ - if (rtlpriv->psc.rfoff_reason > RF_CHANGE_BY_PS) { - u32 rfoffreason = rtlpriv->psc.rfoff_reason; - - rtlpriv->psc.rfoff_reason = RF_CHANGE_BY_INIT; - rtlpriv->psc.rfpwr_state = ERFON; - /* FIXME: check spinlocks if this block is uncommented */ - rtl_ps_set_rf_state(hw, ERFOFF, rfoffreason); - } else { - /* gpio radio on/off is out of adapter start */ - if (rtlpriv->psc.hwradiooff == false) { - rtlpriv->psc.rfpwr_state = ERFON; - rtlpriv->psc.rfoff_reason = 0; - } - } -#endif - /* Before RF-R/W we must execute the IO from Scott's suggestion. */ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, 0xDB); if (rtlhal->version == VERSION_8192S_ACUT) @@ -1010,7 +1044,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw) if (!rtl92s_phy_rf_config(hw)) { RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "RF Config failed\n"); - return rtstatus; + err = rtstatus; + goto exit; } /* After read predefined TXT, we must set BB/MAC/RF @@ -1058,7 +1093,22 @@ int rtl92se_hw_init(struct ieee80211_hw *hw) /* We enable high power and RA related mechanism after NIC * initialized. */ - rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_INIT); + if (hal_get_firmwareversion(rtlpriv) >= 0x35) { + /* Fw v.53 and later. */ + rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_INIT); + } else if (hal_get_firmwareversion(rtlpriv) == 0x34) { + /* Fw v.52. */ + rtl_write_dword(rtlpriv, WFM5, FW_RA_INIT); + rtl92s_phy_chk_fwcmd_iodone(hw); + } else { + /* Compatible earlier FW version. */ + rtl_write_dword(rtlpriv, WFM5, FW_RA_RESET); + rtl92s_phy_chk_fwcmd_iodone(hw); + rtl_write_dword(rtlpriv, WFM5, FW_RA_ACTIVE); + rtl92s_phy_chk_fwcmd_iodone(hw); + rtl_write_dword(rtlpriv, WFM5, FW_RA_REFRESH); + rtl92s_phy_chk_fwcmd_iodone(hw); + } /* Add to prevent ASPM bug. */ /* Always enable hst and NIC clock request. */ @@ -1084,24 +1134,27 @@ int rtl92se_hw_init(struct ieee80211_hw *hw) rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON); rtl92s_dm_init(hw); +exit: + local_irq_restore(flags); rtlpci->being_init_adapter = false; - return err; } -void rtl92se_set_mac_addr(struct rtl_io *io, const u8 * addr) +void rtl92se_set_mac_addr(struct rtl_io *io, const u8 *addr) { + /* This is a stub. */ } void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid) { struct rtl_priv *rtlpriv = rtl_priv(hw); - struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); - u32 reg_rcr = rtlpci->receive_config; + u32 reg_rcr; if (rtlpriv->psc.rfpwr_state != ERFON) return; + rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); + if (check_bssid) { reg_rcr |= (RCR_CBSSID); rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); @@ -1228,7 +1281,6 @@ void rtl92se_disable_interrupt(struct ieee80211_hw *hw) synchronize_irq(rtlpci->pdev->irq); } - static u8 _rtl92s_set_sysclk(struct ieee80211_hw *hw, u8 data) { struct rtl_priv *rtlpriv = rtl_priv(hw); @@ -1697,7 +1749,7 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw) hwinfo[EEPROM_TXPOWERBASE + 6 + rf_path * 3 + i]; /* Read OFDM RF A & B Tx power for 2T */ - rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif[rf_path][i] + rtlefuse->eprom_chnl_txpwr_ht40_2sdf[rf_path][i] = hwinfo[EEPROM_TXPOWERBASE + 12 + rf_path * 3 + i]; } @@ -1722,7 +1774,7 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw) RTPRINT(rtlpriv, FINIT, INIT_EEPROM, "RF(%d) EEPROM HT40 2S Diff Area(%d) = 0x%x\n", rf_path, i, - rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif + rtlefuse->eprom_chnl_txpwr_ht40_2sdf [rf_path][i]); for (rf_path = 0; rf_path < 2; rf_path++) { @@ -1748,12 +1800,12 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw) rtlefuse->eeprom_chnlarea_txpwr_ht40_1s [rf_path][index]; rtlefuse->txpwrlevel_ht40_2s[rf_path][i] = - rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif + rtlefuse->eprom_chnl_txpwr_ht40_2sdf [rf_path][index]; } for (i = 0; i < 14; i++) { - RTPRINT(rtlpriv, FINIT, INIT_TxPower, + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = [0x%x / 0x%x / 0x%x]\n", rf_path, i, rtlefuse->txpwrlevel_cck[rf_path][i], @@ -1790,11 +1842,11 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw) ((rtlefuse->eeprom_pwrgroup[rf_path][index] & 0xf0) >> 4); - RTPRINT(rtlpriv, FINIT, INIT_TxPower, + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "RF-%d pwrgroup_ht20[%d] = 0x%x\n", rf_path, i, rtlefuse->pwrgroup_ht20[rf_path][i]); - RTPRINT(rtlpriv, FINIT, INIT_TxPower, + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "RF-%d pwrgroup_ht40[%d] = 0x%x\n", rf_path, i, rtlefuse->pwrgroup_ht40[rf_path][i]); @@ -1849,27 +1901,27 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw) rtlefuse->eeprom_regulatory = (hwinfo[EEPROM_REGULATORY] & 0x1); } - RTPRINT(rtlpriv, FINIT, INIT_TxPower, + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "eeprom_regulatory = 0x%x\n", rtlefuse->eeprom_regulatory); for (i = 0; i < 14; i++) - RTPRINT(rtlpriv, FINIT, INIT_TxPower, + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "RF-A Ht20 to HT40 Diff[%d] = 0x%x\n", i, rtlefuse->txpwr_ht20diff[RF90_PATH_A][i]); for (i = 0; i < 14; i++) - RTPRINT(rtlpriv, FINIT, INIT_TxPower, + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "RF-A Legacy to Ht40 Diff[%d] = 0x%x\n", i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i]); for (i = 0; i < 14; i++) - RTPRINT(rtlpriv, FINIT, INIT_TxPower, + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "RF-B Ht20 to HT40 Diff[%d] = 0x%x\n", i, rtlefuse->txpwr_ht20diff[RF90_PATH_B][i]); for (i = 0; i < 14; i++) - RTPRINT(rtlpriv, FINIT, INIT_TxPower, + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "RF-B Legacy to HT40 Diff[%d] = 0x%x\n", i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i]); - RTPRINT(rtlpriv, FINIT, INIT_TxPower, + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "TxPwrSafetyFlag = %d\n", rtlefuse->txpwr_safetyflag); /* Read RF-indication and Tx Power gain @@ -1879,7 +1931,7 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw) rtlefuse->legacy_httxpowerdiff = rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][0]; - RTPRINT(rtlpriv, FINIT, INIT_TxPower, + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "TxPowerDiff = %#x\n", rtlefuse->eeprom_txpowerdiff); /* Get TSSI value for each path. */ @@ -1888,7 +1940,7 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw) usvalue = hwinfo[EEPROM_TSSI_B]; rtlefuse->eeprom_tssi[RF90_PATH_B] = (u8)(usvalue & 0xff); - RTPRINT(rtlpriv, FINIT, INIT_TxPower, "TSSI_A = 0x%x, TSSI_B = 0x%x\n", + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "TSSI_A = 0x%x, TSSI_B = 0x%x\n", rtlefuse->eeprom_tssi[RF90_PATH_A], rtlefuse->eeprom_tssi[RF90_PATH_B]); @@ -1896,7 +1948,7 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw) /* and read ThermalMeter from EEPROM */ tempval = hwinfo[EEPROM_THERMALMETER]; rtlefuse->eeprom_thermalmeter = tempval; - RTPRINT(rtlpriv, FINIT, INIT_TxPower, + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "thermalmeter = 0x%x\n", rtlefuse->eeprom_thermalmeter); /* ThermalMeter, BIT(0)~3 for RFIC1, BIT(4)~7 for RFIC2 */ @@ -1913,7 +1965,7 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw) /* Version ID, Channel plan */ rtlefuse->eeprom_channelplan = hwinfo[EEPROM_CHANNELPLAN]; rtlefuse->txpwr_fromeprom = true; - RTPRINT(rtlpriv, FINIT, INIT_TxPower, + RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "EEPROM ChannelPlan = 0x%4x\n", rtlefuse->eeprom_channelplan); /* Read Customer ID or Board Type!!! */ @@ -1998,6 +2050,8 @@ static void rtl92se_update_hal_rate_table(struct ieee80211_hw *hw, ratr_value = sta->supp_rates[1] << 4; else ratr_value = sta->supp_rates[0]; + if (mac->opmode == NL80211_IFTYPE_ADHOC) + ratr_value = 0xfff; ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 | sta->ht_cap.mcs.rx_mask[0] << 12); switch (wirelessmode) { @@ -2084,8 +2138,7 @@ static void rtl92se_update_hal_rate_mask(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry = NULL; u32 ratr_bitmap; u8 ratr_index = 0; - u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) - ? 1 : 0; + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? @@ -2112,6 +2165,8 @@ static void rtl92se_update_hal_rate_mask(struct ieee80211_hw *hw, ratr_bitmap = sta->supp_rates[1] << 4; else ratr_bitmap = sta->supp_rates[0]; + if (mac->opmode == NL80211_IFTYPE_ADHOC) + ratr_bitmap = 0xfff; ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 | sta->ht_cap.mcs.rx_mask[0] << 12); switch (wirelessmode) { @@ -2200,6 +2255,7 @@ static void rtl92se_update_hal_rate_mask(struct ieee80211_hw *hw, ratr_bitmap &= 0x0f8ff0ff; break; } + sta_entry->ratr_index = ratr_index; if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT) ratr_bitmap &= 0x0FFFFFFF; @@ -2438,23 +2494,9 @@ void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr, rtl_cam_del_entry(hw, p_macaddr); rtl_cam_delete_one_entry(hw, p_macaddr, entry_id); } else { - RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, - "The insert KEY length is %d\n", - rtlpriv->sec.key_len[PAIRWISE_KEYIDX]); - RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, - "The insert KEY is %x %x\n", - rtlpriv->sec.key_buf[0][0], - rtlpriv->sec.key_buf[0][1]); - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "add one entry\n"); if (is_pairwise) { - RT_PRINT_DATA(rtlpriv, COMP_SEC, DBG_LOUD, - "Pairwise Key content", - rtlpriv->sec.pairwise_key, - rtlpriv->sec. - key_len[PAIRWISE_KEYIDX]); - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "set Pairwise key\n"); |