diff options
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8192ce/sw.c')
| -rw-r--r-- | drivers/net/wireless/rtlwifi/rtl8192ce/sw.c | 215 |
1 files changed, 160 insertions, 55 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c index b366e886292..12f21f4073e 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright(c) 2009-2010 Realtek Corporation. + * Copyright(c) 2009-2012 Realtek Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as @@ -27,31 +27,86 @@ * *****************************************************************************/ -#include <linux/vmalloc.h> - #include "../wifi.h" #include "../core.h" #include "../pci.h" +#include "../base.h" #include "reg.h" #include "def.h" #include "phy.h" #include "dm.h" #include "hw.h" +#include "rf.h" #include "sw.h" #include "trx.h" #include "led.h" +#include <linux/module.h> + +static void rtl92c_init_aspm_vars(struct ieee80211_hw *hw) +{ + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + /*close ASPM for AMD defaultly */ + rtlpci->const_amdpci_aspm = 0; + + /* + * ASPM PS mode. + * 0 - Disable ASPM, + * 1 - Enable ASPM without Clock Req, + * 2 - Enable ASPM with Clock Req, + * 3 - Alwyas Enable ASPM with Clock Req, + * 4 - Always Enable ASPM without Clock Req. + * set defult to RTL8192CE:3 RTL8192E:2 + * */ + rtlpci->const_pci_aspm = 3; + + /*Setting for PCI-E device */ + rtlpci->const_devicepci_aspm_setting = 0x03; + + /*Setting for PCI-E bridge */ + rtlpci->const_hostpci_aspm_setting = 0x02; + + /* + * In Hw/Sw Radio Off situation. + * 0 - Default, + * 1 - From ASPM setting without low Mac Pwr, + * 2 - From ASPM setting with low Mac Pwr, + * 3 - Bus D3 + * set default to RTL8192CE:0 RTL8192SE:2 + */ + rtlpci->const_hwsw_rfoff_d3 = 0; + + /* + * This setting works for those device with + * backdoor ASPM setting such as EPHY setting. + * 0 - Not support ASPM, + * 1 - Support ASPM, + * 2 - According to chipset. + */ + rtlpci->const_support_pciaspm = 1; +} + int rtl92c_init_sw_vars(struct ieee80211_hw *hw) { + int err; struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + + rtl8192ce_bt_reg_init(hw); - rtlpriv->dm.b_dm_initialgain_enable = 1; + rtlpriv->dm.dm_initialgain_enable = true; rtlpriv->dm.dm_flag = 0; - rtlpriv->dm.b_disable_framebursting = 0;; + rtlpriv->dm.disable_framebursting = false; rtlpriv->dm.thermalvalue = 0; rtlpci->transmit_config = CFENDFORM | BIT(12) | BIT(13); + /* compatible 5G band 88ce just 2.4G band & smsp */ + rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G; + rtlpriv->rtlhal.bandset = BAND_ON_2_4G; + rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY; + rtlpci->receive_config = (RCR_APPFCS | RCR_AMF | RCR_ADF | @@ -75,10 +130,52 @@ int rtl92c_init_sw_vars(struct ieee80211_hw *hw) rtlpci->irq_mask[1] = (u32) (IMR_CPWM | IMR_C2HCMD | 0); - rtlpriv->rtlhal.pfirmware = (u8 *) vmalloc(0x4000); + /* for debug level */ + rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug; + /* for LPS & IPS */ + rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps; + rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps; + rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps; + if (!rtlpriv->psc.inactiveps) + pr_info("rtl8192ce: Power Save off (module option)\n"); + if (!rtlpriv->psc.fwctrl_lps) + pr_info("rtl8192ce: FW Power Save off (module option)\n"); + rtlpriv->psc.reg_fwctrl_lps = 3; + rtlpriv->psc.reg_max_lps_awakeintvl = 5; + /* for ASPM, you can close aspm through + * set const_support_pciaspm = 0 */ + rtl92c_init_aspm_vars(hw); + + if (rtlpriv->psc.reg_fwctrl_lps == 1) + rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE; + else if (rtlpriv->psc.reg_fwctrl_lps == 2) + rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE; + else if (rtlpriv->psc.reg_fwctrl_lps == 3) + rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE; + + /* for firmware buf */ + rtlpriv->rtlhal.pfirmware = vzalloc(0x4000); if (!rtlpriv->rtlhal.pfirmware) { RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - ("Can't alloc buffer for fw.\n")); + "Can't alloc buffer for fw\n"); + return 1; + } + + /* request fw */ + if (IS_VENDOR_UMC_A_CUT(rtlhal->version) && + !IS_92C_SERIAL(rtlhal->version)) + rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cfwU.bin"; + else if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version)) + rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cfwU_B.bin"; + + rtlpriv->max_fw_size = 0x4000; + pr_info("Using firmware %s\n", rtlpriv->cfg->fw_name); + err = request_firmware_nowait(THIS_MODULE, 1, rtlpriv->cfg->fw_name, + rtlpriv->io.dev, GFP_KERNEL, hw, + rtl_fw_cb); + if (err) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + "Failed to request firmware!\n"); return 1; } @@ -102,17 +199,19 @@ static struct rtl_hal_ops rtl8192ce_hal_ops = { .interrupt_recognized = rtl92ce_interrupt_recognized, .hw_init = rtl92ce_hw_init, .hw_disable = rtl92ce_card_disable, + .hw_suspend = rtl92ce_suspend, + .hw_resume = rtl92ce_resume, .enable_interrupt = rtl92ce_enable_interrupt, .disable_interrupt = rtl92ce_disable_interrupt, .set_network_type = rtl92ce_set_network_type, + .set_chk_bssid = rtl92ce_set_check_bssid, .set_qos = rtl92ce_set_qos, .set_bcn_reg = rtl92ce_set_beacon_related_registers, .set_bcn_intv = rtl92ce_set_beacon_interval, .update_interrupt_mask = rtl92ce_update_interrupt_mask, .get_hw_reg = rtl92ce_get_hw_reg, .set_hw_reg = rtl92ce_set_hw_reg, - .update_rate_table = rtl92ce_update_hal_rate_table, - .update_rate_mask = rtl92ce_update_hal_rate_mask, + .update_rate_tbl = rtl92ce_update_hal_rate_tbl, .fill_tx_desc = rtl92ce_tx_fill_desc, .fill_tx_cmddesc = rtl92ce_tx_fill_cmddesc, .query_rx_desc = rtl92ce_rx_query_desc, @@ -121,7 +220,7 @@ static struct rtl_hal_ops rtl8192ce_hal_ops = { .set_bw_mode = rtl92c_phy_set_bw_mode, .switch_channel = rtl92c_phy_sw_chnl, .dm_watchdog = rtl92c_dm_watchdog, - .scan_operation_backup = rtl92c_phy_scan_operation_backup, + .scan_operation_backup = rtl_phy_scan_operation_backup, .set_rf_power_state = rtl92c_phy_set_rf_power_state, .led_control = rtl92ce_led_control, .set_desc = rtl92ce_set_desc, @@ -130,18 +229,31 @@ static struct rtl_hal_ops rtl8192ce_hal_ops = { .enable_hw_sec = rtl92ce_enable_hw_security_config, .set_key = rtl92ce_set_key, .init_sw_leds = rtl92ce_init_sw_leds, - .deinit_sw_leds = rtl92ce_deinit_sw_leds, .get_bbreg = rtl92c_phy_query_bb_reg, .set_bbreg = rtl92c_phy_set_bb_reg, + .set_rfreg = rtl92ce_phy_set_rf_reg, .get_rfreg = rtl92c_phy_query_rf_reg, - .set_rfreg = rtl92c_phy_set_rf_reg, + .phy_rf6052_config = rtl92ce_phy_rf6052_config, + .phy_rf6052_set_cck_txpower = rtl92ce_phy_rf6052_set_cck_txpower, + .phy_rf6052_set_ofdm_txpower = rtl92ce_phy_rf6052_set_ofdm_txpower, + .config_bb_with_headerfile = _rtl92ce_phy_config_bb_with_headerfile, + .config_bb_with_pgheaderfile = _rtl92ce_phy_config_bb_with_pgheaderfile, + .phy_lc_calibrate = _rtl92ce_phy_lc_calibrate, + .phy_set_bw_mode_callback = rtl92ce_phy_set_bw_mode_callback, + .dm_dynamic_txpower = rtl92ce_dm_dynamic_txpower, }; static struct rtl_mod_params rtl92ce_mod_params = { - .sw_crypto = 0, + .sw_crypto = false, + .inactiveps = true, + .swctrl_lps = false, + .fwctrl_lps = true, + .debug = DBG_EMERG, }; static struct rtl_hal_cfg rtl92ce_hal_cfg = { + .bar_id = 2, + .write_readback = true, .name = "rtl92c_pci", .fw_name = "rtlwifi/rtl8192cfw.bin", .ops = &rtl8192ce_hal_ops, @@ -165,6 +277,9 @@ static struct rtl_hal_cfg rtl92ce_hal_cfg = { .maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN, .maps[EFUSE_ANA8M] = EFUSE_ANA8M, .maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE, + .maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION, + .maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN, + .maps[EFUSE_OOB_PROTECT_BYTES_LEN] = EFUSE_OOB_PROTECT_BYTES, .maps[RWCAM] = REG_CAMCMD, .maps[WCAMI] = REG_CAMWRITE, @@ -196,7 +311,7 @@ static struct rtl_hal_cfg rtl92ce_hal_cfg = { .maps[RTL_IMR_TXFOVW] = IMR_TXFOVW, .maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT, - .maps[RTL_IMR_BcnInt] = IMR_BCNINT, + .maps[RTL_IMR_BCNINT] = IMR_BCNINT, .maps[RTL_IMR_RXFOVW] = IMR_RXFOVW, .maps[RTL_IMR_RDU] = IMR_RDU, .maps[RTL_IMR_ATIMEND] = IMR_ATIMEND, @@ -212,24 +327,24 @@ static struct rtl_hal_cfg rtl92ce_hal_cfg = { .maps[RTL_IMR_ROK] = IMR_ROK, .maps[RTL_IBSS_INT_MASKS] = (IMR_BCNINT | IMR_TBDOK | IMR_TBDER), - .maps[RTL_RC_CCK_RATE1M] = DESC92C_RATE1M, - .maps[RTL_RC_CCK_RATE2M] = DESC92C_RATE2M, - .maps[RTL_RC_CCK_RATE5_5M] = DESC92C_RATE5_5M, - .maps[RTL_RC_CCK_RATE11M] = DESC92C_RATE11M, - .maps[RTL_RC_OFDM_RATE6M] = DESC92C_RATE6M, - .maps[RTL_RC_OFDM_RATE9M] = DESC92C_RATE9M, - .maps[RTL_RC_OFDM_RATE12M] = DESC92C_RATE12M, - .maps[RTL_RC_OFDM_RATE18M] = DESC92C_RATE18M, - .maps[RTL_RC_OFDM_RATE24M] = DESC92C_RATE24M, - .maps[RTL_RC_OFDM_RATE36M] = DESC92C_RATE36M, - .maps[RTL_RC_OFDM_RATE48M] = DESC92C_RATE48M, - .maps[RTL_RC_OFDM_RATE54M] = DESC92C_RATE54M, - - .maps[RTL_RC_HT_RATEMCS7] = DESC92C_RATEMCS7, - .maps[RTL_RC_HT_RATEMCS15] = DESC92C_RATEMCS15, + .maps[RTL_RC_CCK_RATE1M] = DESC92_RATE1M, + .maps[RTL_RC_CCK_RATE2M] = DESC92_RATE2M, + .maps[RTL_RC_CCK_RATE5_5M] = DESC92_RATE5_5M, + .maps[RTL_RC_CCK_RATE11M] = DESC92_RATE11M, + .maps[RTL_RC_OFDM_RATE6M] = DESC92_RATE6M, + .maps[RTL_RC_OFDM_RATE9M] = DESC92_RATE9M, + .maps[RTL_RC_OFDM_RATE12M] = DESC92_RATE12M, + .maps[RTL_RC_OFDM_RATE18M] = DESC92_RATE18M, + .maps[RTL_RC_OFDM_RATE24M] = DESC92_RATE24M, + .maps[RTL_RC_OFDM_RATE36M] = DESC92_RATE36M, + .maps[RTL_RC_OFDM_RATE48M] = DESC92_RATE48M, + .maps[RTL_RC_OFDM_RATE54M] = DESC92_RATE54M, + + .maps[RTL_RC_HT_RATEMCS7] = DESC92_RATEMCS7, + .maps[RTL_RC_HT_RATEMCS15] = DESC92_RATEMCS15, }; -static struct pci_device_id rtl92ce_pci_ids[] __devinitdata = { +static DEFINE_PCI_DEVICE_TABLE(rtl92ce_pci_ids) = { {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8191, rtl92ce_hal_cfg)}, {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8178, rtl92ce_hal_cfg)}, {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8177, rtl92ce_hal_cfg)}, @@ -245,38 +360,28 @@ MODULE_AUTHOR("Larry Finger <Larry.Finger@lwfinger.net>"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Realtek 8192C/8188C 802.11n PCI wireless"); MODULE_FIRMWARE("rtlwifi/rtl8192cfw.bin"); +MODULE_FIRMWARE("rtlwifi/rtl8192cfwU.bin"); +MODULE_FIRMWARE("rtlwifi/rtl8192cfwU_B.bin"); module_param_named(swenc, rtl92ce_mod_params.sw_crypto, bool, 0444); -MODULE_PARM_DESC(swenc, "using hardware crypto (default 0 [hardware])\n"); +module_param_named(debug, rtl92ce_mod_params.debug, int, 0444); +module_param_named(ips, rtl92ce_mod_params.inactiveps, bool, 0444); +module_param_named(swlps, rtl92ce_mod_params.swctrl_lps, bool, 0444); +module_param_named(fwlps, rtl92ce_mod_params.fwctrl_lps, bool, 0444); +MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n"); +MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n"); +MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n"); +MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n"); +MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)"); + +static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume); static struct pci_driver rtl92ce_driver = { .name = KBUILD_MODNAME, .id_table = rtl92ce_pci_ids, .probe = rtl_pci_probe, .remove = rtl_pci_disconnect, - -#ifdef CONFIG_PM - .suspend = rtl_pci_suspend, - .resume = rtl_pci_resume, -#endif - + .driver.pm = &rtlwifi_pm_ops, }; -static int __init rtl92ce_module_init(void) -{ - int ret; - - ret = pci_register_driver(&rtl92ce_driver); - if (ret) - RT_ASSERT(false, (": No device found\n")); - - return ret; -} - -static void __exit rtl92ce_module_exit(void) -{ - pci_unregister_driver(&rtl92ce_driver); -} - -module_init(rtl92ce_module_init); -module_exit(rtl92ce_module_exit); +module_pci_driver(rtl92ce_driver); |