aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rtl818x/rtl8187
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rtl818x/rtl8187')
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187/dev.c55
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187/rtl8187.h14
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187/rtl8225.c5
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187/rtl8225.h4
4 files changed, 48 insertions, 30 deletions
diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c
index f49220e234b..629ad8cfa17 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
@@ -2,10 +2,10 @@
* Linux device driver for RTL8187
*
* Copyright 2007 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
*
* Based on the r8187 driver, which is:
- * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al.
*
* The driver was extended to the RTL8187B in 2008 by:
* Herton Ronaldo Krzesinski <herton@mandriva.com.br>
@@ -20,7 +20,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
#include <linux/usb.h>
#include <linux/slab.h>
#include <linux/delay.h>
@@ -37,7 +36,7 @@
#include "rfkill.h"
MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
-MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
+MODULE_AUTHOR("Andrea Merello <andrea.merello@gmail.com>");
MODULE_AUTHOR("Herton Ronaldo Krzesinski <herton@mandriva.com.br>");
MODULE_AUTHOR("Hin-Tak Leung <htl10@users.sourceforge.net>");
MODULE_AUTHOR("Larry Finger <Larry.Finger@lwfinger.net>");
@@ -254,14 +253,21 @@ static void rtl8187_tx(struct ieee80211_hw *dev,
flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24;
if (ieee80211_has_morefrags(tx_hdr->frame_control))
flags |= RTL818X_TX_DESC_FLAG_MOREFRAG;
+
+ /* HW will perform RTS-CTS when only RTS flags is set.
+ * HW will perform CTS-to-self when both RTS and CTS flags are set.
+ * RTS rate and RTS duration will be used also for CTS-to-self.
+ */
if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
flags |= RTL818X_TX_DESC_FLAG_RTS;
flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
rts_dur = ieee80211_rts_duration(dev, priv->vif,
skb->len, info);
} else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
- flags |= RTL818X_TX_DESC_FLAG_CTS;
+ flags |= RTL818X_TX_DESC_FLAG_RTS | RTL818X_TX_DESC_FLAG_CTS;
flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
+ rts_dur = ieee80211_ctstoself_duration(dev, priv->vif,
+ skb->len, info);
}
if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
@@ -382,6 +388,8 @@ static void rtl8187_rx_cb(struct urb *urb)
rx_status.freq = dev->conf.chandef.chan->center_freq;
rx_status.band = dev->conf.chandef.chan->band;
rx_status.flag |= RX_FLAG_MACTIME_START;
+ if (flags & RTL818X_RX_DESC_FLAG_SPLCP)
+ rx_status.flag |= RX_FLAG_SHORTPRE;
if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
@@ -416,7 +424,7 @@ static int rtl8187_init_urbs(struct ieee80211_hw *dev)
struct rtl8187_rx_info *info;
int ret = 0;
- while (skb_queue_len(&priv->rx_queue) < 16) {
+ while (skb_queue_len(&priv->rx_queue) < 32) {
skb = __dev_alloc_skb(RTL8187_MAX_RX, GFP_KERNEL);
if (!skb) {
ret = -ENOMEM;
@@ -438,17 +446,16 @@ static int rtl8187_init_urbs(struct ieee80211_hw *dev)
skb_queue_tail(&priv->rx_queue, skb);
usb_anchor_urb(entry, &priv->anchored);
ret = usb_submit_urb(entry, GFP_KERNEL);
+ usb_put_urb(entry);
if (ret) {
skb_unlink(skb, &priv->rx_queue);
usb_unanchor_urb(entry);
goto err;
}
- usb_free_urb(entry);
}
return ret;
err:
- usb_free_urb(entry);
kfree_skb(skb);
usb_kill_anchored_urbs(&priv->anchored);
return ret;
@@ -594,7 +601,7 @@ static void rtl8187_set_anaparam(struct rtl8187_priv *priv, bool rfon)
rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam);
rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2);
if (priv->is_rtl8187b)
- rtl818x_iowrite8(priv, &priv->map->ANAPARAM3, anaparam3);
+ rtl818x_iowrite8(priv, &priv->map->ANAPARAM3A, anaparam3);
reg &= ~RTL818X_CONFIG3_ANAPARAM_WRITE;
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
@@ -787,7 +794,7 @@ static int rtl8187b_init_hw(struct ieee80211_hw *dev)
rtl818x_iowrite16(priv, (__le16 *)0xFF34, 0x0FFF);
reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
- reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
+ reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
/* Auto Rate Fallback Register (ARFR): 1M-54M setting */
@@ -945,8 +952,8 @@ static int rtl8187_start(struct ieee80211_hw *dev)
rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
- reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
- reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
@@ -956,8 +963,12 @@ static int rtl8187_start(struct ieee80211_hw *dev)
(RETRY_COUNT << 8 /* short retry limit */) |
(RETRY_COUNT << 0 /* long retry limit */) |
(7 << 21 /* MAX TX DMA */));
- rtl8187_init_urbs(dev);
- rtl8187b_init_status_urb(dev);
+ ret = rtl8187_init_urbs(dev);
+ if (ret)
+ goto rtl8187_start_exit;
+ ret = rtl8187b_init_status_urb(dev);
+ if (ret)
+ usb_kill_anchored_urbs(&priv->anchored);
goto rtl8187_start_exit;
}
@@ -966,7 +977,9 @@ static int rtl8187_start(struct ieee80211_hw *dev)
rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
- rtl8187_init_urbs(dev);
+ ret = rtl8187_init_urbs(dev);
+ if (ret)
+ goto rtl8187_start_exit;
reg = RTL818X_RX_CONF_ONLYERLPKT |
RTL818X_RX_CONF_RX_AUTORESETPHY |
@@ -982,13 +995,13 @@ static int rtl8187_start(struct ieee80211_hw *dev)
rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
- reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
- reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
+ reg &= ~RTL818X_CW_CONF_PERPACKET_CW;
+ reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
- reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
- reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
@@ -1632,10 +1645,10 @@ static int rtl8187_probe(struct usb_interface *intf,
err_free_dmabuf:
kfree(priv->io_dmabuf);
- err_free_dev:
- ieee80211_free_hw(dev);
usb_set_intfdata(intf, NULL);
usb_put_dev(udev);
+ err_free_dev:
+ ieee80211_free_hw(dev);
return err;
}
diff --git a/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
index e19a20a8e95..a6ad79f61bf 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
+++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
@@ -2,10 +2,10 @@
* Definitions for RTL8187 hardware
*
* Copyright 2007 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
*
* Based on the r8187 driver, which is:
- * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -15,6 +15,8 @@
#ifndef RTL8187_H
#define RTL8187_H
+#include <linux/cache.h>
+
#include "rtl818x.h"
#include "leds.h"
@@ -139,7 +141,10 @@ struct rtl8187_priv {
u8 aifsn[4];
u8 rfkill_mask;
struct {
- __le64 buf;
+ union {
+ __le64 buf;
+ u8 dummy1[L1_CACHE_BYTES];
+ } ____cacheline_aligned;
struct sk_buff_head queue;
} b_tx_status; /* This queue is used by both -b and non-b devices */
struct mutex io_mutex;
@@ -147,7 +152,8 @@ struct rtl8187_priv {
u8 bits8;
__le16 bits16;
__le32 bits32;
- } *io_dmabuf;
+ u8 dummy2[L1_CACHE_BYTES];
+ } *io_dmabuf ____cacheline_aligned;
bool rfkill_off;
u16 seqno;
};
diff --git a/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c
index f0bf35fedba..5ecf18ed67b 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c
@@ -2,10 +2,10 @@
* Radio tuning for RTL8225 on RTL8187
*
* Copyright 2007 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
*
* Based on the r8187 driver, which is:
- * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al.
*
* Magic delays, register offsets, and phy value tables below are
* taken from the original r8187 driver sources. Thanks to Realtek
@@ -16,7 +16,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
#include <linux/usb.h>
#include <net/mac80211.h>
diff --git a/drivers/net/wireless/rtl818x/rtl8187/rtl8225.h b/drivers/net/wireless/rtl818x/rtl8187/rtl8225.h
index 20c5b6ead0f..141afb09a5b 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/rtl8225.h
+++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8225.h
@@ -2,10 +2,10 @@
* Radio tuning definitions for RTL8225 on RTL8187
*
* Copyright 2007 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
*
* Based on the r8187 driver, which is:
- * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-09 23:12:19 +0000