diff options
Diffstat (limited to 'drivers/net/wireless/rtl818x/rtl8187/dev.c')
| -rw-r--r-- | drivers/net/wireless/rtl818x/rtl8187/dev.c | 34 |
1 files changed, 21 insertions, 13 deletions
diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c index 9a6edb0c014..629ad8cfa17 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c @@ -20,7 +20,6 @@ * published by the Free Software Foundation. */ -#include <linux/init.h> #include <linux/usb.h> #include <linux/slab.h> #include <linux/delay.h> @@ -254,14 +253,21 @@ static void rtl8187_tx(struct ieee80211_hw *dev, flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24; if (ieee80211_has_morefrags(tx_hdr->frame_control)) flags |= RTL818X_TX_DESC_FLAG_MOREFRAG; + + /* HW will perform RTS-CTS when only RTS flags is set. + * HW will perform CTS-to-self when both RTS and CTS flags are set. + * RTS rate and RTS duration will be used also for CTS-to-self. + */ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) { flags |= RTL818X_TX_DESC_FLAG_RTS; flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; rts_dur = ieee80211_rts_duration(dev, priv->vif, skb->len, info); } else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { - flags |= RTL818X_TX_DESC_FLAG_CTS; + flags |= RTL818X_TX_DESC_FLAG_RTS | RTL818X_TX_DESC_FLAG_CTS; flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; + rts_dur = ieee80211_ctstoself_duration(dev, priv->vif, + skb->len, info); } if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { @@ -382,6 +388,8 @@ static void rtl8187_rx_cb(struct urb *urb) rx_status.freq = dev->conf.chandef.chan->center_freq; rx_status.band = dev->conf.chandef.chan->band; rx_status.flag |= RX_FLAG_MACTIME_START; + if (flags & RTL818X_RX_DESC_FLAG_SPLCP) + rx_status.flag |= RX_FLAG_SHORTPRE; if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR) rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); @@ -416,7 +424,7 @@ static int rtl8187_init_urbs(struct ieee80211_hw *dev) struct rtl8187_rx_info *info; int ret = 0; - while (skb_queue_len(&priv->rx_queue) < 16) { + while (skb_queue_len(&priv->rx_queue) < 32) { skb = __dev_alloc_skb(RTL8187_MAX_RX, GFP_KERNEL); if (!skb) { ret = -ENOMEM; @@ -593,7 +601,7 @@ static void rtl8187_set_anaparam(struct rtl8187_priv *priv, bool rfon) rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam); rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2); if (priv->is_rtl8187b) - rtl818x_iowrite8(priv, &priv->map->ANAPARAM3, anaparam3); + rtl818x_iowrite8(priv, &priv->map->ANAPARAM3A, anaparam3); reg &= ~RTL818X_CONFIG3_ANAPARAM_WRITE; rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg); rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, @@ -786,7 +794,7 @@ static int rtl8187b_init_hw(struct ieee80211_hw *dev) rtl818x_iowrite16(priv, (__le16 *)0xFF34, 0x0FFF); reg = rtl818x_ioread8(priv, &priv->map->CW_CONF); - reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT; + reg |= RTL818X_CW_CONF_PERPACKET_RETRY; rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg); /* Auto Rate Fallback Register (ARFR): 1M-54M setting */ @@ -944,8 +952,8 @@ static int rtl8187_start(struct ieee80211_hw *dev) rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg); reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL); - reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT; - reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT; + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN; + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL; reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT; rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg); @@ -987,13 +995,13 @@ static int rtl8187_start(struct ieee80211_hw *dev) rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg); reg = rtl818x_ioread8(priv, &priv->map->CW_CONF); - reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT; - reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT; + reg &= ~RTL818X_CW_CONF_PERPACKET_CW; + reg |= RTL818X_CW_CONF_PERPACKET_RETRY; rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg); reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL); - reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT; - reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT; + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN; + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL; reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT; rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg); @@ -1637,10 +1645,10 @@ static int rtl8187_probe(struct usb_interface *intf, err_free_dmabuf: kfree(priv->io_dmabuf); - err_free_dev: - ieee80211_free_hw(dev); usb_set_intfdata(intf, NULL); usb_put_dev(udev); + err_free_dev: + ieee80211_free_hw(dev); return err; } |