diff options
Diffstat (limited to 'drivers/net/wireless/rtl818x/rtl8180_dev.c')
| -rw-r--r-- | drivers/net/wireless/rtl818x/rtl8180_dev.c | 1188 |
1 files changed, 0 insertions, 1188 deletions
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c deleted file mode 100644 index 707c688da61..00000000000 --- a/drivers/net/wireless/rtl818x/rtl8180_dev.c +++ /dev/null @@ -1,1188 +0,0 @@ - -/* - * Linux device driver for RTL8180 / RTL8185 - * - * Copyright 2007 Michael Wu <flamingice@sourmilk.net> - * Copyright 2007 Andrea Merello <andreamrl@tiscali.it> - * - * Based on the r8180 driver, which is: - * Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al. - * - * Thanks to Realtek for their support! - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/etherdevice.h> -#include <linux/eeprom_93cx6.h> -#include <net/mac80211.h> - -#include "rtl8180.h" -#include "rtl8180_rtl8225.h" -#include "rtl8180_sa2400.h" -#include "rtl8180_max2820.h" -#include "rtl8180_grf5101.h" - -MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); -MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>"); -MODULE_DESCRIPTION("RTL8180 / RTL8185 PCI wireless driver"); -MODULE_LICENSE("GPL"); - -static DEFINE_PCI_DEVICE_TABLE(rtl8180_table) = { - /* rtl8185 */ - { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) }, - { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x700f) }, - { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x701f) }, - - /* rtl8180 */ - { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8180) }, - { PCI_DEVICE(0x1799, 0x6001) }, - { PCI_DEVICE(0x1799, 0x6020) }, - { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x3300) }, - { } -}; - -MODULE_DEVICE_TABLE(pci, rtl8180_table); - -static const struct ieee80211_rate rtl818x_rates[] = { - { .bitrate = 10, .hw_value = 0, }, - { .bitrate = 20, .hw_value = 1, }, - { .bitrate = 55, .hw_value = 2, }, - { .bitrate = 110, .hw_value = 3, }, - { .bitrate = 60, .hw_value = 4, }, - { .bitrate = 90, .hw_value = 5, }, - { .bitrate = 120, .hw_value = 6, }, - { .bitrate = 180, .hw_value = 7, }, - { .bitrate = 240, .hw_value = 8, }, - { .bitrate = 360, .hw_value = 9, }, - { .bitrate = 480, .hw_value = 10, }, - { .bitrate = 540, .hw_value = 11, }, -}; - -static const struct ieee80211_channel rtl818x_channels[] = { - { .center_freq = 2412 }, - { .center_freq = 2417 }, - { .center_freq = 2422 }, - { .center_freq = 2427 }, - { .center_freq = 2432 }, - { .center_freq = 2437 }, - { .center_freq = 2442 }, - { .center_freq = 2447 }, - { .center_freq = 2452 }, - { .center_freq = 2457 }, - { .center_freq = 2462 }, - { .center_freq = 2467 }, - { .center_freq = 2472 }, - { .center_freq = 2484 }, -}; - - -void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data) -{ - struct rtl8180_priv *priv = dev->priv; - int i = 10; - u32 buf; - - buf = (data << 8) | addr; - - rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf | 0x80); - while (i--) { - rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf); - if (rtl818x_ioread8(priv, &priv->map->PHY[2]) == (data & 0xFF)) - return; - } -} - -static void rtl8180_handle_rx(struct ieee80211_hw *dev) -{ - struct rtl8180_priv *priv = dev->priv; - unsigned int count = 32; - u8 signal, agc, sq; - - while (count--) { - struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx]; - struct sk_buff *skb = priv->rx_buf[priv->rx_idx]; - u32 flags = le32_to_cpu(entry->flags); - - if (flags & RTL818X_RX_DESC_FLAG_OWN) - return; - - if (unlikely(flags & (RTL818X_RX_DESC_FLAG_DMA_FAIL | - RTL818X_RX_DESC_FLAG_FOF | - RTL818X_RX_DESC_FLAG_RX_ERR))) - goto done; - else { - u32 flags2 = le32_to_cpu(entry->flags2); - struct ieee80211_rx_status rx_status = {0}; - struct sk_buff *new_skb = dev_alloc_skb(MAX_RX_SIZE); - - if (unlikely(!new_skb)) - goto done; - - pci_unmap_single(priv->pdev, - *((dma_addr_t *)skb->cb), - MAX_RX_SIZE, PCI_DMA_FROMDEVICE); - skb_put(skb, flags & 0xFFF); - - rx_status.antenna = (flags2 >> 15) & 1; - rx_status.rate_idx = (flags >> 20) & 0xF; - agc = (flags2 >> 17) & 0x7F; - if (priv->r8185) { - if (rx_status.rate_idx > 3) - signal = 90 - clamp_t(u8, agc, 25, 90); - else - signal = 95 - clamp_t(u8, agc, 30, 95); - } else { - sq = flags2 & 0xff; - signal = priv->rf->calc_rssi(agc, sq); - } - rx_status.signal = signal; - rx_status.freq = dev->conf.channel->center_freq; - rx_status.band = dev->conf.channel->band; - rx_status.mactime = le64_to_cpu(entry->tsft); - rx_status.flag |= RX_FLAG_TSFT; - if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR) - rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; - - memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); - ieee80211_rx_irqsafe(dev, skb); - - skb = new_skb; - priv->rx_buf[priv->rx_idx] = skb; - *((dma_addr_t *) skb->cb) = - pci_map_single(priv->pdev, skb_tail_pointer(skb), - MAX_RX_SIZE, PCI_DMA_FROMDEVICE); - } - - done: - entry->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb)); - entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN | - MAX_RX_SIZE); - if (priv->rx_idx == 31) - entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR); - priv->rx_idx = (priv->rx_idx + 1) % 32; - } -} - -static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio) -{ - struct rtl8180_priv *priv = dev->priv; - struct rtl8180_tx_ring *ring = &priv->tx_ring[prio]; - - while (skb_queue_len(&ring->queue)) { - struct rtl8180_tx_desc *entry = &ring->desc[ring->idx]; - struct sk_buff *skb; - struct ieee80211_tx_info *info; - u32 flags = le32_to_cpu(entry->flags); - - if (flags & RTL818X_TX_DESC_FLAG_OWN) - return; - - ring->idx = (ring->idx + 1) % ring->entries; - skb = __skb_dequeue(&ring->queue); - pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf), - skb->len, PCI_DMA_TODEVICE); - - info = IEEE80211_SKB_CB(skb); - ieee80211_tx_info_clear_status(info); - - if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && - (flags & RTL818X_TX_DESC_FLAG_TX_OK)) - info->flags |= IEEE80211_TX_STAT_ACK; - - info->status.rates[0].count = (flags & 0xFF) + 1; - info->status.rates[1].idx = -1; - - ieee80211_tx_status_irqsafe(dev, skb); - if (ring->entries - skb_queue_len(&ring->queue) == 2) - ieee80211_wake_queue(dev, prio); - } -} - -static irqreturn_t rtl8180_interrupt(int irq, void *dev_id) -{ - struct ieee80211_hw *dev = dev_id; - struct rtl8180_priv *priv = dev->priv; - u16 reg; - - spin_lock(&priv->lock); - reg = rtl818x_ioread16(priv, &priv->map->INT_STATUS); - if (unlikely(reg == 0xFFFF)) { - spin_unlock(&priv->lock); - return IRQ_HANDLED; - } - - rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg); - - if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR)) - rtl8180_handle_tx(dev, 3); - - if (reg & (RTL818X_INT_TXH_OK | RTL818X_INT_TXH_ERR)) - rtl8180_handle_tx(dev, 2); - - if (reg & (RTL818X_INT_TXN_OK | RTL818X_INT_TXN_ERR)) - rtl8180_handle_tx(dev, 1); - - if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR)) - rtl8180_handle_tx(dev, 0); - - if (reg & (RTL818X_INT_RX_OK | RTL818X_INT_RX_ERR)) - rtl8180_handle_rx(dev); - - spin_unlock(&priv->lock); - - return IRQ_HANDLED; -} - -static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb) -{ - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct rtl8180_priv *priv = dev->priv; - struct rtl8180_tx_ring *ring; - struct rtl8180_tx_desc *entry; - unsigned long flags; - unsigned int idx, prio; - dma_addr_t mapping; - u32 tx_flags; - u8 rc_flags; - u16 plcp_len = 0; - __le16 rts_duration = 0; - - prio = skb_get_queue_mapping(skb); - ring = &priv->tx_ring[prio]; - - mapping = pci_map_single(priv->pdev, skb->data, - skb->len, PCI_DMA_TODEVICE); - - tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS | - RTL818X_TX_DESC_FLAG_LS | - (ieee80211_get_tx_rate(dev, info)->hw_value << 24) | - skb->len; - - if (priv->r8185) - tx_flags |= RTL818X_TX_DESC_FLAG_DMA | - RTL818X_TX_DESC_FLAG_NO_ENC; - - rc_flags = info->control.rates[0].flags; - if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { - tx_flags |= RTL818X_TX_DESC_FLAG_RTS; - tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; - } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { - tx_flags |= RTL818X_TX_DESC_FLAG_CTS; - tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; - } - - if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) - rts_duration = ieee80211_rts_duration(dev, priv->vif, skb->len, - info); - - if (!priv->r8185) { - unsigned int remainder; - - plcp_len = DIV_ROUND_UP(16 * (skb->len + 4), - (ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10); - remainder = (16 * (skb->len + 4)) % - ((ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10); - if (remainder <= 6) - plcp_len |= 1 << 15; - } - - spin_lock_irqsave(&priv->lock, flags); - - if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { - if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) - priv->seqno += 0x10; - hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); - hdr->seq_ctrl |= cpu_to_le16(priv->seqno); - } - - idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries; - entry = &ring->desc[idx]; - - entry->rts_duration = rts_duration; - entry->plcp_len = cpu_to_le16(plcp_len); - entry->tx_buf = cpu_to_le32(mapping); - entry->frame_len = cpu_to_le32(skb->len); - entry->flags2 = info->control.rates[1].idx >= 0 ? - ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0; - entry->retry_limit = info->control.rates[0].count; - entry->flags = cpu_to_le32(tx_flags); - __skb_queue_tail(&ring->queue, skb); - if (ring->entries - skb_queue_len(&ring->queue) < 2) - ieee80211_stop_queue(dev, prio); - - spin_unlock_irqrestore(&priv->lock, flags); - - rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4))); - - return 0; -} - -void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam) -{ - u8 reg; - - rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); - reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); - rtl818x_iowrite8(priv, &priv->map->CONFIG3, - reg | RTL818X_CONFIG3_ANAPARAM_WRITE); - rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam); - rtl818x_iowrite8(priv, &priv->map->CONFIG3, - reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); - rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); -} - -static int rtl8180_init_hw(struct ieee80211_hw *dev) -{ - struct rtl8180_priv *priv = dev->priv; - u16 reg; - - rtl818x_iowrite8(priv, &priv->map->CMD, 0); - rtl818x_ioread8(priv, &priv->map->CMD); - msleep(10); - - /* reset */ - rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); - rtl818x_ioread8(priv, &priv->map->CMD); - - reg = rtl818x_ioread8(priv, &priv->map->CMD); - reg &= (1 << 1); - reg |= RTL818X_CMD_RESET; - rtl818x_iowrite8(priv, &priv->map->CMD, RTL818X_CMD_RESET); - rtl818x_ioread8(priv, &priv->map->CMD); - msleep(200); - - /* check success of reset */ - if (rtl818x_ioread8(priv, &priv->map->CMD) & RTL818X_CMD_RESET) { - wiphy_err(dev->wiphy, "reset timeout!\n"); - return -ETIMEDOUT; - } - - rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD); - rtl818x_ioread8(priv, &priv->map->CMD); - msleep(200); - - if (rtl818x_ioread8(priv, &priv->map->CONFIG3) & (1 << 3)) { - /* For cardbus */ - reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); - reg |= 1 << 1; - rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg); - reg = rtl818x_ioread16(priv, &priv->map->FEMR); - reg |= (1 << 15) | (1 << 14) | (1 << 4); - rtl818x_iowrite16(priv, &priv->map->FEMR, reg); - } - - rtl818x_iowrite8(priv, &priv->map->MSR, 0); - - if (!priv->r8185) - rtl8180_set_anaparam(priv, priv->anaparam); - - rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma); - rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma); - rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma); - rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma); - rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma); - - /* TODO: necessary? specs indicate not */ - rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); - reg = rtl818x_ioread8(priv, &priv->map->CONFIG2); - rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3)); - if (priv->r8185) { - reg = rtl818x_ioread8(priv, &priv->map->CONFIG2); - rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4)); - } - rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); - - /* TODO: set CONFIG5 for calibrating AGC on rtl8180 + philips radio? */ - - /* TODO: turn off hw wep on rtl8180 */ - - rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0); - - if (priv->r8185) { - rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0); - rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81); - rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0); - - rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3); - - /* TODO: set ClkRun enable? necessary? */ - reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE); - rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6)); - rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); - reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); - rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2)); - rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); - } else { - rtl818x_iowrite16(priv, &priv->map->BRSR, 0x1); - rtl818x_iowrite8(priv, &priv->map->SECURITY, 0); - - rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6); - rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C); - } - - priv->rf->init(dev); - if (priv->r8185) - rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3); - return 0; -} - -static int rtl8180_init_rx_ring(struct ieee80211_hw *dev) -{ - struct rtl8180_priv *priv = dev->priv; - struct rtl8180_rx_desc *entry; - int i; - - priv->rx_ring = pci_alloc_consistent(priv->pdev, - sizeof(*priv->rx_ring) * 32, - &priv->rx_ring_dma); - - if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) { - wiphy_err(dev->wiphy, "Cannot allocate RX ring\n"); - return -ENOMEM; - } - - memset(priv->rx_ring, 0, sizeof(*priv->rx_ring) * 32); - priv->rx_idx = 0; - - for (i = 0; i < 32; i++) { - struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE); - dma_addr_t *mapping; - entry = &priv->rx_ring[i]; - if (!skb) - return 0; - - priv->rx_buf[i] = skb; - mapping = (dma_addr_t *)skb->cb; - *mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb), - MAX_RX_SIZE, PCI_DMA_FROMDEVICE); - entry->rx_buf = cpu_to_le32(*mapping); - entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN | - MAX_RX_SIZE); - } - entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR); - return 0; -} - -static void rtl8180_free_rx_ring(struct ieee80211_hw *dev) -{ - struct rtl8180_priv *priv = dev->priv; - int i; - - for (i = 0; i < 32; i++) { - struct sk_buff *skb = priv->rx_buf[i]; - if (!skb) - continue; - - pci_unmap_single(priv->pdev, - *((dma_addr_t *)skb->cb), - MAX_RX_SIZE, PCI_DMA_FROMDEVICE); - kfree_skb(skb); - } - - pci_free_consistent(priv->pdev, sizeof(*priv->rx_ring) * 32, - priv->rx_ring, priv->rx_ring_dma); - priv->rx_ring = NULL; -} - -static int rtl8180_init_tx_ring(struct ieee80211_hw *dev, - unsigned int prio, unsigned int entries) -{ - struct rtl8180_priv *priv = dev->priv; - struct rtl8180_tx_desc *ring; - dma_addr_t dma; - int i; - - ring = pci_alloc_consistent(priv->pdev, sizeof(*ring) * entries, &dma); - if (!ring || (unsigned long)ring & 0xFF) { - wiphy_err(dev->wiphy, "Cannot allocate TX ring (prio = %d)\n", - prio); - return -ENOMEM; - } - - memset(ring, 0, sizeof(*ring)*entries); - priv->tx_ring[prio].desc = ring; - priv->tx_ring[prio].dma = dma; - priv->tx_ring[prio].idx = 0; - priv->tx_ring[prio].entries = entries; - skb_queue_head_init(&priv->tx_ring[prio].queue); - - for (i = 0; i < entries; i++) - ring[i].next_tx_desc = - cpu_to_le32((u32)dma + ((i + 1) % entries) * sizeof(*ring)); - - return 0; -} - -static void rtl8180_free_tx_ring(struct ieee80211_hw *dev, unsigned int prio) -{ - struct rtl8180_priv *priv = dev->priv; - struct rtl8180_tx_ring *ring = &priv->tx_ring[prio]; - - while (skb_queue_len(&ring->queue)) { - struct rtl8180_tx_desc *entry = &ring->desc[ring->idx]; - struct sk_buff *skb = __skb_dequeue(&ring->queue); - - pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf), - skb->len, PCI_DMA_TODEVICE); - kfree_skb(skb); - ring->idx = (ring->idx + 1) % ring->entries; - } - - pci_free_consistent(priv->pdev, sizeof(*ring->desc)*ring->entries, - ring->desc, ring->dma); - ring->desc = NULL; -} - -static int rtl8180_start(struct ieee80211_hw *dev) -{ - struct rtl8180_priv *priv = dev->priv; - int ret, i; - u32 reg; - - ret = rtl8180_init_rx_ring(dev); - if (ret) - return ret; - - for (i = 0; i < 4; i++) - if ((ret = rtl8180_init_tx_ring(dev, i, 16))) - goto err_free_rings; - - ret = rtl8180_init_hw(dev); - if (ret) - goto err_free_rings; - - rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma); - rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma); - rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma); - rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma); - rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma); - - ret = request_irq(priv->pdev->irq, rtl8180_interrupt, - IRQF_SHARED, KBUILD_MODNAME, dev); - if (ret) { - wiphy_err(dev->wiphy, "failed to register IRQ handler\n"); - goto err_free_rings; - } - - rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF); - - rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0); - rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0); - - reg = RTL818X_RX_CONF_ONLYERLPKT | - RTL818X_RX_CONF_RX_AUTORESETPHY | - RTL818X_RX_CONF_MGMT | - RTL818X_RX_CONF_DATA | - (7 << 8 /* MAX RX DMA */) | - RTL818X_RX_CONF_BROADCAST | - RTL818X_RX_CONF_NICMAC; - - if (priv->r8185) - reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2; - else { - reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1) - ? RTL818X_RX_CONF_CSDM1 : 0; - reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2) - ? RTL818X_RX_CONF_CSDM2 : 0; - } - - priv->rx_conf = reg; - rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg); - - if (priv->r8185) { - reg = rtl818x_ioread8(priv, &priv->map->CW_CONF); - reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT; - reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT; - rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg); - - reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL); - reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT; - reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT; - reg |= RTL818X_TX_AGC_CTL_FEEDBACK_ANT; - rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg); - - /* disable early TX */ - rtl818x_iowrite8(priv, (u8 __iomem *)priv->map + 0xec, 0x3f); - } - - reg = rtl818x_ioread32(priv, &priv->map->TX_CONF); - reg |= (6 << 21 /* MAX TX DMA */) | - RTL818X_TX_CONF_NO_ICV; - - if (priv->r8185) - reg &= ~RTL818X_TX_CONF_PROBE_DTS; - else - reg &= ~RTL818X_TX_CONF_HW_SEQNUM; - - /* different meaning, same value on both rtl8185 and rtl8180 */ - reg &= ~RTL818X_TX_CONF_SAT_HWPLCP; - - rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg); - - reg = rtl818x_ioread8(priv, &priv->map->CMD); - reg |= RTL818X_CMD_RX_ENABLE; - reg |= RTL818X_CMD_TX_ENABLE; - rtl818x_iowrite8(priv, &priv->map->CMD, reg); - - return 0; - - err_free_rings: - rtl8180_free_rx_ring(dev); - for (i = 0; i < 4; i++) - if (priv->tx_ring[i].desc) - rtl8180_free_tx_ring(dev, i); - - return ret; -} - -static void rtl8180_stop(struct ieee80211_hw *dev) -{ - struct rtl8180_priv *priv = dev->priv; - u8 reg; - int i; - - rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); - - reg = rtl818x_ioread8(priv, &priv->map->CMD); - reg &= ~RTL818X_CMD_TX_ENABLE; - reg &= ~RTL818X_CMD_RX_ENABLE; - rtl818x_iowrite8(priv, &priv->map->CMD, reg); - - priv->rf->stop(dev); - - rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); - reg = rtl818x_ioread8(priv, &priv->map->CONFIG4); - rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF); - rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); - - free_irq(priv->pdev->irq, dev); - - rtl8180_free_rx_ring(dev); - for (i = 0; i < 4; i++) - rtl8180_free_tx_ring(dev, i); -} - -static u64 rtl8180_get_tsf(struct ieee80211_hw *dev) -{ - struct rtl8180_priv *priv = dev->priv; - - return rtl818x_ioread32(priv, &priv->map->TSFT[0]) | - (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32; -} - -static void rtl8180_beacon_work(struct work_struct *work) -{ - struct rtl8180_vif *vif_priv = - container_of(work, struct rtl8180_vif, beacon_work.work); - struct ieee80211_vif *vif = - container_of((void *)vif_priv, struct ieee80211_vif, drv_priv); - struct ieee80211_hw *dev = vif_priv->dev; - struct ieee80211_mgmt *mgmt; - struct sk_buff *skb; - int err = 0; - - /* don't overflow the tx ring */ - if (ieee80211_queue_stopped(dev, 0)) - goto resched; - - /* grab a fresh beacon */ - skb = ieee80211_beacon_get(dev, vif); - if (!skb) - goto resched; - - /* - * update beacon timestamp w/ TSF value - * TODO: make hardware update beacon timestamp - */ - mgmt = (struct ieee80211_mgmt *)skb->data; - mgmt->u.beacon.timestamp = cpu_to_le64(rtl8180_get_tsf(dev)); - - /* TODO: use actual beacon queue */ - skb_set_queue_mapping(skb, 0); - - err = rtl8180_tx(dev, skb); - WARN_ON(err); - -resched: - /* - * schedule next beacon - * TODO: use hardware support for beacon timing - */ - schedule_delayed_work(&vif_priv->beacon_work, - usecs_to_jiffies(1024 * vif->bss_conf.beacon_int)); -} - -static int rtl8180_add_interface(struct ieee80211_hw *dev, - struct ieee80211_vif *vif) -{ - struct rtl8180_priv *priv = dev->priv; - struct rtl8180_vif *vif_priv; - - /* - * We only support one active interface at a time. - */ - if (priv->vif) - return -EBUSY; - - switch (vif->type) { - case NL80211_IFTYPE_STATION: - case NL80211_IFTYPE_ADHOC: - break; - default: - return -EOPNOTSUPP; - } - - priv->vif = vif; - - /* Initialize driver private area */ - vif_priv = (struct rtl8180_vif *)&vif->drv_priv; - vif_priv->dev = dev; - INIT_DELAYED_WORK(&vif_priv->beacon_work, rtl8180_beacon_work); - vif_priv->enable_beacon = false; - - rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); - rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0], - le32_to_cpu(*(__le32 *)vif->addr)); - rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->MAC[4], - le16_to_cpu(*(__le16 *)(vif->addr + 4))); - rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); - - return 0; -} - -static void rtl8180_remove_interface(struct ieee80211_hw *dev, - struct ieee80211_vif *vif) -{ - struct rtl8180_priv *priv = dev->priv; - priv->vif = NULL; -} - -static int rtl8180_config(struct ieee80211_hw *dev, u32 changed) -{ - struct rtl8180_priv *priv = dev->priv; - struct ieee80211_conf *conf = &dev->conf; - - priv->rf->set_chan(dev, conf); - - return 0; -} - -static void rtl8180_bss_info_changed(struct ieee80211_hw *dev, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *info, - u32 changed) -{ - struct rtl8180_priv *priv = dev->priv; - struct rtl8180_vif *vif_priv; - int i; - u8 reg; - - vif_priv = (struct rtl8180_vif *)&vif->drv_priv; - - if (changed & BSS_CHANGED_BSSID) { - for (i = 0; i < ETH_ALEN; i++) - rtl818x_iowrite8(priv, &priv->map->BSSID[i], - info->bssid[i]); - - if (is_valid_ether_addr(info->bssid)) { - if (vif->type == NL80211_IFTYPE_ADHOC) - reg = RTL818X_MSR_ADHOC; - else - reg = RTL818X_MSR_INFRA; - } else - reg = RTL818X_MSR_NO_LINK; - rtl818x_iowrite8(priv, &priv->map->MSR, reg); - } - - if (changed & BSS_CHANGED_ERP_SLOT && priv->rf->conf_erp) - priv->rf->conf_erp(dev, info); - - if (changed & BSS_CHANGED_BEACON_ENABLED) - vif_priv->enable_beacon = info->enable_beacon; - - if (changed & (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON)) { - cancel_delayed_work_sync(&vif_priv->beacon_work); - if (vif_priv->enable_beacon) - schedule_work(&vif_priv->beacon_work.work); - } -} - -static u64 rtl8180_prepare_multicast(struct ieee80211_hw *dev, - struct netdev_hw_addr_list *mc_list) -{ - return netdev_hw_addr_list_count(mc_list); -} - -static void rtl8180_configure_filter(struct ieee80211_hw *dev, - unsigned int changed_flags, - unsigned int *total_flags, - u64 multicast) -{ - struct rtl8180_priv *priv = dev->priv; - - if (changed_flags & FIF_FCSFAIL) - priv->rx_conf ^= RTL818X_RX_CONF_FCS; - if (changed_flags & FIF_CONTROL) - priv->rx_conf ^= RTL818X_RX_CONF_CTRL; - if (changed_flags & FIF_OTHER_BSS) - priv->rx_conf ^= RTL818X_RX_CONF_MONITOR; - if (*total_flags & FIF_ALLMULTI || multicast > 0) - priv->rx_conf |= RTL818X_RX_CONF_MULTICAST; - else - priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST; - - *total_flags = 0; - - if (priv->rx_conf & RTL818X_RX_CONF_FCS) - *total_flags |= FIF_FCSFAIL; - if (priv->rx_conf & RTL818X_RX_CONF_CTRL) - *total_flags |= FIF_CONTROL; - if (priv->rx_conf & RTL818X_RX_CONF_MONITOR) - *total_flags |= FIF_OTHER_BSS; - if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST) - *total_flags |= FIF_ALLMULTI; - - rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf); -} - -static const struct ieee80211_ops rtl8180_ops = { - .tx = rtl8180_tx, - .start = rtl8180_start, - .stop = rtl8180_stop, - .add_interface = rtl8180_add_interface, - .remove_interface = rtl8180_remove_interface, - .config = rtl8180_config, - .bss_info_changed = rtl8180_bss_info_changed, - .prepare_multicast = rtl8180_prepare_multicast, - .configure_filter = rtl8180_configure_filter, - .get_tsf = rtl8180_get_tsf, -}; - -static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom) -{ - struct ieee80211_hw *dev = eeprom->data; - struct rtl8180_priv *priv = dev->priv; - u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); - - eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE; - eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ; - eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK; - eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS; -} - -static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom) -{ - struct ieee80211_hw *dev = eeprom->data; - struct rtl8180_priv *priv = dev->priv; - u8 reg = 2 << 6; - - if (eeprom->reg_data_in) - reg |= RTL818X_EEPROM_CMD_WRITE; - if (eeprom->reg_data_out) - reg |= RTL818X_EEPROM_CMD_READ; - if (eeprom->reg_data_clock) - reg |= RTL818X_EEPROM_CMD_CK; - if (eeprom->reg_chip_select) - reg |= RTL818X_EEPROM_CMD_CS; - - rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg); - rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); - udelay(10); -} - -static int __devinit rtl8180_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - struct ieee80211_hw *dev; - struct rtl8180_priv *priv; - unsigned long mem_addr, mem_len; - unsigned int io_addr, io_len; - int err, i; - struct eeprom_93cx6 eeprom; - const char *chip_name, *rf_name = NULL; - u32 reg; - u16 eeprom_val; - u8 mac_addr[ETH_ALEN]; - - err = pci_enable_device(pdev); - if (err) { - printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n", - pci_name(pdev)); - return err; - } - - err = pci_request_regions(pdev, KBUILD_MODNAME); - if (err) { - printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n", - pci_name(pdev)); - return err; - } - - io_addr = pci_resource_start(pdev, 0); - io_len = pci_resource_len(pdev, 0); - mem_addr = pci_resource_start(pdev, 1); - mem_len = pci_resource_len(pdev, 1); - - if (mem_len < sizeof(struct rtl818x_csr) || - io_len < sizeof(struct rtl818x_csr)) { - printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n", - pci_name(pdev)); - err = -ENOMEM; - goto err_free_reg; - } - - if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) || - (err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))) { - printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n", - pci_name(pdev)); - goto err_free_reg; - } - - pci_set_master(pdev); - - dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8180_ops); - if (!dev) { - printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n", - pci_name(pdev)); - err = -ENOMEM; - goto err_free_reg; - } - - priv = dev->priv; - priv->pdev = pdev; - - dev->max_rates = 2; - SET_IEEE80211_DEV(dev, &pdev->dev); - pci_set_drvdata(pdev, dev); - - priv->map = pci_iomap(pdev, 1, mem_len); - if (!priv->map) - priv->map = pci_iomap(pdev, 0, io_len); - - if (!priv->map) { - printk(KERN_ERR "%s (rtl8180): Cannot map device memory\n", - pci_name(pdev)); - goto err_free_dev; - } - - BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels)); - BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates)); - - memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels)); - memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates)); - - priv->band.band = IEEE80211_BAND_2GHZ; - priv->band.channels = priv->channels; - priv->band.n_channels = ARRAY_SIZE(rtl818x_channels); - priv->band.bitrates = priv->rates; - priv->band.n_bitrates = 4; - dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band; - - dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SIGNAL_UNSPEC; - dev->vif_data_size = sizeof(struct rtl8180_vif); - dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | - BIT(NL80211_IFTYPE_ADHOC); - dev->queues = 1; - dev->max_signal = 65; - - reg = rtl818x_ioread32(priv, &priv->map->TX_CONF); - reg &= RTL818X_TX_CONF_HWVER_MASK; - switch (reg) { - case RTL818X_TX_CONF_R8180_ABCD: - chip_name = "RTL8180"; - break; - case RTL818X_TX_CONF_R8180_F: - chip_name = "RTL8180vF"; - break; - case RTL818X_TX_CONF_R8185_ABC: - chip_name = "RTL8185"; - break; - case RTL818X_TX_CONF_R8185_D: - chip_name = "RTL8185vD"; - break; - default: - printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n", - pci_name(pdev), reg >> 25); - goto err_iounmap; - } - - priv->r8185 = reg & RTL818X_TX_CONF_R8185_ABC; - if (priv->r8185) { - priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates); - pci_try_set_mwi(pdev); - } - - eeprom.data = dev; - eeprom.register_read = rtl8180_eeprom_register_read; - eeprom.register_write = rtl8180_eeprom_register_write; - if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6)) - eeprom.width = PCI_EEPROM_WIDTH_93C66; - else - eeprom.width = PCI_EEPROM_WIDTH_93C46; - - rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_PROGRAM); - rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); - udelay(10); - - eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val); - eeprom_val &= 0xFF; - switch (eeprom_val) { - case 1: rf_name = "Intersil"; - break; - case 2: rf_name = "RFMD"; - break; - case 3: priv->rf = &sa2400_rf_ops; - break; - case 4: priv->rf = &max2820_rf_ops; - break; - case 5: priv->rf = &grf5101_rf_ops; - break; - case 9: priv->rf = rtl8180_detect_rf(dev); - break; - case 10: - rf_name = "RTL8255"; - break; - default: - printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n", - pci_name(pdev), eeprom_val); - goto err_iounmap; - } - - if (!priv->rf) { - printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n", - pci_name(pdev), rf_name); - goto err_iounmap; - } - - eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val); - priv->csthreshold = eeprom_val >> 8; - if (!priv->r8185) { - __le32 anaparam; - eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2); - priv->anaparam = le32_to_cpu(anaparam); - eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam); - } - - eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)mac_addr, 3); - if (!is_valid_ether_addr(mac_addr)) { - printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using" - " randomly generated MAC addr\n", pci_name(pdev)); - random_ether_addr(mac_addr); - } - SET_IEEE80211_PERM_ADDR(dev, mac_addr); - - /* CCK TX power */ - for (i = 0; i < 14; i += 2) { - u16 txpwr; - eeprom_93cx6_read(&eeprom, 0x10 + (i >> 1), &txpwr); - priv->channels[i].hw_value = txpwr & 0xFF; - priv->channels[i + 1].hw_value = txpwr >> 8; - } - - /* OFDM TX power */ - if (priv->r8185) { - for (i = 0; i < 14; i += 2) { - u16 txpwr; - eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr); - priv->channels[i].hw_value |= (txpwr & 0xFF) << 8; - priv->channels[i + 1].hw_value |= txpwr & 0xFF00; - } - } - - rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); - - spin_lock_init(&priv->lock); - - err = ieee80211_register_hw(dev); - if (err) { - printk(KERN_ERR "%s (rtl8180): Cannot register device\n", - pci_name(pdev)); - goto err_iounmap; - } - - wiphy_info(dev->wiphy, "hwaddr %pm, %s + %s\n", - mac_addr, chip_name, priv->rf->name); - - return 0; - - err_iounmap: - iounmap(priv->map); - - err_free_dev: - pci_set_drvdata(pdev, NULL); - ieee80211_free_hw(dev); - - err_free_reg: - pci_release_regions(pdev); - pci_disable_device(pdev); - return err; -} - -static void __devexit rtl8180_remove(struct pci_dev *pdev) -{ - struct ieee80211_hw *dev = pci_get_drvdata(pdev); - struct rtl8180_priv *priv; - - if (!dev) - return; - - ieee80211_unregister_hw(dev); - - priv = dev->priv; - - pci_iounmap(pdev, priv->map); - pci_release_regions(pdev); - pci_disable_device(pdev); - ieee80211_free_hw(dev); -} - -#ifdef CONFIG_PM -static int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state) -{ - pci_save_state(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - return 0; -} - -static int rtl8180_resume(struct pci_dev *pdev) -{ - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - return 0; -} - -#endif /* CONFIG_PM */ - -static struct pci_driver rtl8180_driver = { - .name = KBUILD_MODNAME, - .id_table = rtl8180_table, - .probe = rtl8180_probe, - .remove = __devexit_p(rtl8180_remove), -#ifdef CONFIG_PM - .suspend = rtl8180_suspend, - .resume = rtl8180_resume, -#endif /* CONFIG_PM */ -}; - -static int __init rtl8180_init(void) -{ - return pci_register_driver(&rtl8180_driver); -} - -static void __exit rtl8180_exit(void) -{ - pci_unregister_driver(&rtl8180_driver); -} - -module_init(rtl8180_init); -module_exit(rtl8180_exit); |