diff options
Diffstat (limited to 'drivers/net/wireless/rtl818x.h')
| -rw-r--r-- | drivers/net/wireless/rtl818x.h | 226 |
1 files changed, 0 insertions, 226 deletions
diff --git a/drivers/net/wireless/rtl818x.h b/drivers/net/wireless/rtl818x.h deleted file mode 100644 index 283de30628e..00000000000 --- a/drivers/net/wireless/rtl818x.h +++ /dev/null @@ -1,226 +0,0 @@ -/* - * Definitions for RTL818x hardware - * - * Copyright 2007 Michael Wu <flamingice@sourmilk.net> - * Copyright 2007 Andrea Merello <andreamrl@tiscali.it> - * - * Based on the r8187 driver, which is: - * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef RTL818X_H -#define RTL818X_H - -struct rtl818x_csr { - u8 MAC[6]; - u8 reserved_0[2]; - __le32 MAR[2]; - u8 RX_FIFO_COUNT; - u8 reserved_1; - u8 TX_FIFO_COUNT; - u8 BQREQ; - u8 reserved_2[4]; - __le32 TSFT[2]; - __le32 TLPDA; - __le32 TNPDA; - __le32 THPDA; - __le16 BRSR; - u8 BSSID[6]; - u8 RESP_RATE; - u8 EIFS; - u8 reserved_3[1]; - u8 CMD; -#define RTL818X_CMD_TX_ENABLE (1 << 2) -#define RTL818X_CMD_RX_ENABLE (1 << 3) -#define RTL818X_CMD_RESET (1 << 4) - u8 reserved_4[4]; - __le16 INT_MASK; - __le16 INT_STATUS; -#define RTL818X_INT_RX_OK (1 << 0) -#define RTL818X_INT_RX_ERR (1 << 1) -#define RTL818X_INT_TXL_OK (1 << 2) -#define RTL818X_INT_TXL_ERR (1 << 3) -#define RTL818X_INT_RX_DU (1 << 4) -#define RTL818X_INT_RX_FO (1 << 5) -#define RTL818X_INT_TXN_OK (1 << 6) -#define RTL818X_INT_TXN_ERR (1 << 7) -#define RTL818X_INT_TXH_OK (1 << 8) -#define RTL818X_INT_TXH_ERR (1 << 9) -#define RTL818X_INT_TXB_OK (1 << 10) -#define RTL818X_INT_TXB_ERR (1 << 11) -#define RTL818X_INT_ATIM (1 << 12) -#define RTL818X_INT_BEACON (1 << 13) -#define RTL818X_INT_TIME_OUT (1 << 14) -#define RTL818X_INT_TX_FO (1 << 15) - __le32 TX_CONF; -#define RTL818X_TX_CONF_LOOPBACK_MAC (1 << 17) -#define RTL818X_TX_CONF_NO_ICV (1 << 19) -#define RTL818X_TX_CONF_DISCW (1 << 20) -#define RTL818X_TX_CONF_R8180_ABCD (2 << 25) -#define RTL818X_TX_CONF_R8180_F (3 << 25) -#define RTL818X_TX_CONF_R8185_ABC (4 << 25) -#define RTL818X_TX_CONF_R8185_D (5 << 25) -#define RTL818X_TX_CONF_HWVER_MASK (7 << 25) -#define RTL818X_TX_CONF_CW_MIN (1 << 31) - __le32 RX_CONF; -#define RTL818X_RX_CONF_MONITOR (1 << 0) -#define RTL818X_RX_CONF_NICMAC (1 << 1) -#define RTL818X_RX_CONF_MULTICAST (1 << 2) -#define RTL818X_RX_CONF_BROADCAST (1 << 3) -#define RTL818X_RX_CONF_DATA (1 << 18) -#define RTL818X_RX_CONF_CTRL (1 << 19) -#define RTL818X_RX_CONF_MGMT (1 << 20) -#define RTL818X_RX_CONF_BSSID (1 << 23) -#define RTL818X_RX_CONF_RX_AUTORESETPHY (1 << 28) -#define RTL818X_RX_CONF_ONLYERLPKT (1 << 31) - __le32 INT_TIMEOUT; - __le32 TBDA; - u8 EEPROM_CMD; -#define RTL818X_EEPROM_CMD_READ (1 << 0) -#define RTL818X_EEPROM_CMD_WRITE (1 << 1) -#define RTL818X_EEPROM_CMD_CK (1 << 2) -#define RTL818X_EEPROM_CMD_CS (1 << 3) -#define RTL818X_EEPROM_CMD_NORMAL (0 << 6) -#define RTL818X_EEPROM_CMD_LOAD (1 << 6) -#define RTL818X_EEPROM_CMD_PROGRAM (2 << 6) -#define RTL818X_EEPROM_CMD_CONFIG (3 << 6) - u8 CONFIG0; - u8 CONFIG1; - u8 CONFIG2; - __le32 ANAPARAM; - u8 MSR; -#define RTL818X_MSR_NO_LINK (0 << 2) -#define RTL818X_MSR_ADHOC (1 << 2) -#define RTL818X_MSR_INFRA (2 << 2) - u8 CONFIG3; -#define RTL818X_CONFIG3_ANAPARAM_WRITE (1 << 6) - u8 CONFIG4; -#define RTL818X_CONFIG4_POWEROFF (1 << 6) -#define RTL818X_CONFIG4_VCOOFF (1 << 7) - u8 TESTR; - u8 reserved_9[2]; - __le16 PGSELECT; - __le32 ANAPARAM2; - u8 reserved_10[12]; - __le16 BEACON_INTERVAL; - __le16 ATIM_WND; - __le16 BEACON_INTERVAL_TIME; - __le16 ATIMTR_INTERVAL; - u8 reserved_11[4]; - u8 PHY[4]; - __le16 RFPinsOutput; - __le16 RFPinsEnable; - __le16 RFPinsSelect; - __le16 RFPinsInput; - __le32 RF_PARA; - __le32 RF_TIMING; - u8 GP_ENABLE; - u8 GPIO; - u8 reserved_12[10]; - u8 TX_AGC_CTL; -#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT (1 << 0) -#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT (1 << 1) -#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT (1 << 2) - u8 TX_GAIN_CCK; - u8 TX_GAIN_OFDM; - u8 TX_ANTENNA; - u8 reserved_13[16]; - u8 WPA_CONF; - u8 reserved_14[3]; - u8 SIFS; - u8 DIFS; - u8 SLOT; - u8 reserved_15[5]; - u8 CW_CONF; -#define RTL818X_CW_CONF_PERPACKET_CW_SHIFT (1 << 0) -#define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT (1 << 1) - u8 CW_VAL; - u8 RATE_FALLBACK; - u8 reserved_16[25]; - u8 CONFIG5; - u8 TX_DMA_POLLING; - u8 reserved_17[2]; - __le16 CWR; - u8 RETRY_CTR; - u8 reserved_18[5]; - __le32 RDSAR; - u8 reserved_19[18]; - u16 TALLY_CNT; - u8 TALLY_SEL; -} __attribute__((packed)); - -static const struct ieee80211_rate rtl818x_rates[] = { - { .rate = 10, - .val = 0, - .flags = IEEE80211_RATE_CCK }, - { .rate = 20, - .val = 1, - .flags = IEEE80211_RATE_CCK }, - { .rate = 55, - .val = 2, - .flags = IEEE80211_RATE_CCK }, - { .rate = 110, - .val = 3, - .flags = IEEE80211_RATE_CCK }, - { .rate = 60, - .val = 4, - .flags = IEEE80211_RATE_OFDM }, - { .rate = 90, - .val = 5, - .flags = IEEE80211_RATE_OFDM }, - { .rate = 120, - .val = 6, - .flags = IEEE80211_RATE_OFDM }, - { .rate = 180, - .val = 7, - .flags = IEEE80211_RATE_OFDM }, - { .rate = 240, - .val = 8, - .flags = IEEE80211_RATE_OFDM }, - { .rate = 360, - .val = 9, - .flags = IEEE80211_RATE_OFDM }, - { .rate = 480, - .val = 10, - .flags = IEEE80211_RATE_OFDM }, - { .rate = 540, - .val = 11, - .flags = IEEE80211_RATE_OFDM }, -}; - -static const struct ieee80211_channel rtl818x_channels[] = { - { .chan = 1, - .freq = 2412}, - { .chan = 2, - .freq = 2417}, - { .chan = 3, - .freq = 2422}, - { .chan = 4, - .freq = 2427}, - { .chan = 5, - .freq = 2432}, - { .chan = 6, - .freq = 2437}, - { .chan = 7, - .freq = 2442}, - { .chan = 8, - .freq = 2447}, - { .chan = 9, - .freq = 2452}, - { .chan = 10, - .freq = 2457}, - { .chan = 11, - .freq = 2462}, - { .chan = 12, - .freq = 2467}, - { .chan = 13, - .freq = 2472}, - { .chan = 14, - .freq = 2484} -}; - -#endif /* RTL818X_H */ |