diff options
Diffstat (limited to 'drivers/net/wireless/rtl818x.h')
| -rw-r--r-- | drivers/net/wireless/rtl818x.h | 178 |
1 files changed, 0 insertions, 178 deletions
diff --git a/drivers/net/wireless/rtl818x.h b/drivers/net/wireless/rtl818x.h deleted file mode 100644 index 4f7d38f506e..00000000000 --- a/drivers/net/wireless/rtl818x.h +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Definitions for RTL818x hardware - * - * Copyright 2007 Michael Wu <flamingice@sourmilk.net> - * Copyright 2007 Andrea Merello <andreamrl@tiscali.it> - * - * Based on the r8187 driver, which is: - * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef RTL818X_H -#define RTL818X_H - -struct rtl818x_csr { - u8 MAC[6]; - u8 reserved_0[2]; - __le32 MAR[2]; - u8 RX_FIFO_COUNT; - u8 reserved_1; - u8 TX_FIFO_COUNT; - u8 BQREQ; - u8 reserved_2[4]; - __le32 TSFT[2]; - __le32 TLPDA; - __le32 TNPDA; - __le32 THPDA; - __le16 BRSR; - u8 BSSID[6]; - u8 RESP_RATE; - u8 EIFS; - u8 reserved_3[1]; - u8 CMD; -#define RTL818X_CMD_TX_ENABLE (1 << 2) -#define RTL818X_CMD_RX_ENABLE (1 << 3) -#define RTL818X_CMD_RESET (1 << 4) - u8 reserved_4[4]; - __le16 INT_MASK; - __le16 INT_STATUS; -#define RTL818X_INT_RX_OK (1 << 0) -#define RTL818X_INT_RX_ERR (1 << 1) -#define RTL818X_INT_TXL_OK (1 << 2) -#define RTL818X_INT_TXL_ERR (1 << 3) -#define RTL818X_INT_RX_DU (1 << 4) -#define RTL818X_INT_RX_FO (1 << 5) -#define RTL818X_INT_TXN_OK (1 << 6) -#define RTL818X_INT_TXN_ERR (1 << 7) -#define RTL818X_INT_TXH_OK (1 << 8) -#define RTL818X_INT_TXH_ERR (1 << 9) -#define RTL818X_INT_TXB_OK (1 << 10) -#define RTL818X_INT_TXB_ERR (1 << 11) -#define RTL818X_INT_ATIM (1 << 12) -#define RTL818X_INT_BEACON (1 << 13) -#define RTL818X_INT_TIME_OUT (1 << 14) -#define RTL818X_INT_TX_FO (1 << 15) - __le32 TX_CONF; -#define RTL818X_TX_CONF_LOOPBACK_MAC (1 << 17) -#define RTL818X_TX_CONF_LOOPBACK_CONT (3 << 17) -#define RTL818X_TX_CONF_NO_ICV (1 << 19) -#define RTL818X_TX_CONF_DISCW (1 << 20) -#define RTL818X_TX_CONF_SAT_HWPLCP (1 << 24) -#define RTL818X_TX_CONF_R8180_ABCD (2 << 25) -#define RTL818X_TX_CONF_R8180_F (3 << 25) -#define RTL818X_TX_CONF_R8185_ABC (4 << 25) -#define RTL818X_TX_CONF_R8185_D (5 << 25) -#define RTL818X_TX_CONF_HWVER_MASK (7 << 25) -#define RTL818X_TX_CONF_PROBE_DTS (1 << 29) -#define RTL818X_TX_CONF_HW_SEQNUM (1 << 30) -#define RTL818X_TX_CONF_CW_MIN (1 << 31) - __le32 RX_CONF; -#define RTL818X_RX_CONF_MONITOR (1 << 0) -#define RTL818X_RX_CONF_NICMAC (1 << 1) -#define RTL818X_RX_CONF_MULTICAST (1 << 2) -#define RTL818X_RX_CONF_BROADCAST (1 << 3) -#define RTL818X_RX_CONF_FCS (1 << 5) -#define RTL818X_RX_CONF_DATA (1 << 18) -#define RTL818X_RX_CONF_CTRL (1 << 19) -#define RTL818X_RX_CONF_MGMT (1 << 20) -#define RTL818X_RX_CONF_ADDR3 (1 << 21) -#define RTL818X_RX_CONF_PM (1 << 22) -#define RTL818X_RX_CONF_BSSID (1 << 23) -#define RTL818X_RX_CONF_RX_AUTORESETPHY (1 << 28) -#define RTL818X_RX_CONF_CSDM1 (1 << 29) -#define RTL818X_RX_CONF_CSDM2 (1 << 30) -#define RTL818X_RX_CONF_ONLYERLPKT (1 << 31) - __le32 INT_TIMEOUT; - __le32 TBDA; - u8 EEPROM_CMD; -#define RTL818X_EEPROM_CMD_READ (1 << 0) -#define RTL818X_EEPROM_CMD_WRITE (1 << 1) -#define RTL818X_EEPROM_CMD_CK (1 << 2) -#define RTL818X_EEPROM_CMD_CS (1 << 3) -#define RTL818X_EEPROM_CMD_NORMAL (0 << 6) -#define RTL818X_EEPROM_CMD_LOAD (1 << 6) -#define RTL818X_EEPROM_CMD_PROGRAM (2 << 6) -#define RTL818X_EEPROM_CMD_CONFIG (3 << 6) - u8 CONFIG0; - u8 CONFIG1; - u8 CONFIG2; -#define RTL818X_CONFIG2_ANTENNA_DIV (1 << 6) - __le32 ANAPARAM; - u8 MSR; -#define RTL818X_MSR_NO_LINK (0 << 2) -#define RTL818X_MSR_ADHOC (1 << 2) -#define RTL818X_MSR_INFRA (2 << 2) - u8 CONFIG3; -#define RTL818X_CONFIG3_ANAPARAM_WRITE (1 << 6) - u8 CONFIG4; -#define RTL818X_CONFIG4_POWEROFF (1 << 6) -#define RTL818X_CONFIG4_VCOOFF (1 << 7) - u8 TESTR; - u8 reserved_9[2]; - u8 PGSELECT; - u8 SECURITY; - __le32 ANAPARAM2; - u8 reserved_10[12]; - __le16 BEACON_INTERVAL; - __le16 ATIM_WND; - __le16 BEACON_INTERVAL_TIME; - __le16 ATIMTR_INTERVAL; - u8 PHY_DELAY; - u8 CARRIER_SENSE_COUNTER; - u8 reserved_11[2]; - u8 PHY[4]; - __le16 RFPinsOutput; - __le16 RFPinsEnable; - __le16 RFPinsSelect; - __le16 RFPinsInput; - __le32 RF_PARA; - __le32 RF_TIMING; - u8 GP_ENABLE; - u8 GPIO; - u8 reserved_12[10]; - u8 TX_AGC_CTL; -#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT (1 << 0) -#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT (1 << 1) -#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT (1 << 2) - u8 TX_GAIN_CCK; - u8 TX_GAIN_OFDM; - u8 TX_ANTENNA; - u8 reserved_13[16]; - u8 WPA_CONF; - u8 reserved_14[3]; - u8 SIFS; - u8 DIFS; - u8 SLOT; - u8 reserved_15[5]; - u8 CW_CONF; -#define RTL818X_CW_CONF_PERPACKET_CW_SHIFT (1 << 0) -#define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT (1 << 1) - u8 CW_VAL; - u8 RATE_FALLBACK; - u8 reserved_16[25]; - u8 CONFIG5; - u8 TX_DMA_POLLING; - u8 reserved_17[2]; - __le16 CWR; - u8 RETRY_CTR; - u8 reserved_18[5]; - __le32 RDSAR; - u8 reserved_19[12]; - __le16 FEMR; - u8 reserved_20[4]; - __le16 TALLY_CNT; - u8 TALLY_SEL; -} __attribute__((packed)); - -struct rtl818x_rf_ops { - char *name; - void (*init)(struct ieee80211_hw *); - void (*stop)(struct ieee80211_hw *); - void (*set_chan)(struct ieee80211_hw *, struct ieee80211_conf *); -}; - -#endif /* RTL818X_H */ |