diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2x00reg.h')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00reg.h | 263 |
1 files changed, 123 insertions, 140 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h index b1915dc7dda..3cc541d13d6 100644 --- a/drivers/net/wireless/rt2x00/rt2x00reg.h +++ b/drivers/net/wireless/rt2x00/rt2x00reg.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -13,9 +13,7 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + along with this program; if not, see <http://www.gnu.org/licenses/>. */ /* @@ -27,14 +25,13 @@ #define RT2X00REG_H /* - * TX result flags. + * RX crypto status */ -enum TX_STATUS { - TX_SUCCESS = 0, - TX_SUCCESS_RETRY = 1, - TX_FAIL_RETRY = 2, - TX_FAIL_INVALID = 3, - TX_FAIL_OTHER = 4, +enum rx_crypto { + RX_CRYPTO_SUCCESS = 0, + RX_CRYPTO_FAIL_ICV = 1, + RX_CRYPTO_FAIL_MIC = 2, + RX_CRYPTO_FAIL_KEY = 3, }; /* @@ -64,7 +61,8 @@ enum led_mode { enum tsf_sync { TSF_SYNC_NONE = 0, TSF_SYNC_INFRA = 1, - TSF_SYNC_BEACON = 2, + TSF_SYNC_ADHOC = 2, + TSF_SYNC_AP_NONE = 3, }; /* @@ -83,10 +81,6 @@ enum dev_state { */ STATE_RADIO_ON, STATE_RADIO_OFF, - STATE_RADIO_RX_ON, - STATE_RADIO_RX_OFF, - STATE_RADIO_RX_ON_LINK, - STATE_RADIO_RX_OFF_LINK, STATE_RADIO_IRQ_ON, STATE_RADIO_IRQ_OFF, }; @@ -102,6 +96,16 @@ enum ifs { }; /* + * IFS backoff values for HT devices + */ +enum txop { + TXOP_HTTXOP = 0, + TXOP_PIFS = 1, + TXOP_SIFS = 2, + TXOP_BACKOFF = 3, +}; + +/* * Cipher types for hardware encryption */ enum cipher { @@ -115,7 +119,34 @@ enum cipher { */ CIPHER_CKIP64 = 5, CIPHER_CKIP128 = 6, - CIPHER_TKIP_NO_MIC = 7, + CIPHER_TKIP_NO_MIC = 7, /* Don't send to device */ + +/* + * Max cipher type. + * Note that CIPHER_NONE isn't counted, and CKIP64 and CKIP128 + * are excluded due to limitations in mac80211. + */ + CIPHER_MAX = 4, +}; + +/* + * Rate modulations + */ +enum rate_modulation { + RATE_MODE_CCK = 0, + RATE_MODE_OFDM = 1, + RATE_MODE_HT_MIX = 2, + RATE_MODE_HT_GREENFIELD = 3, +}; + +/* + * Firmware validation error codes + */ +enum firmware_errors { + FW_OK, + FW_BAD_CRC, + FW_BAD_LENGTH, + FW_BAD_VERSION, }; /* @@ -141,154 +172,106 @@ struct rt2x00_field32 { /* * Power of two check, this will check - * if the mask that has been given contains - * and contiguous set of bits. + * if the mask that has been given contains and contiguous set of bits. + * Note that we cannot use the is_power_of_2() function since this + * check must be done at compile-time. */ #define is_power_of_two(x) ( !((x) & ((x)-1)) ) #define low_bit_mask(x) ( ((x)-1) & ~(x) ) -#define is_valid_mask(x) is_power_of_two(1 + (x) + low_bit_mask(x)) +#define is_valid_mask(x) is_power_of_two(1LU + (x) + low_bit_mask(x)) + +/* + * Macros to find first set bit in a variable. + * These macros behave the same as the __ffs() functions but + * the most important difference that this is done during + * compile-time rather then run-time. + */ +#define compile_ffs2(__x) \ + __builtin_choose_expr(((__x) & 0x1), 0, 1) + +#define compile_ffs4(__x) \ + __builtin_choose_expr(((__x) & 0x3), \ + (compile_ffs2((__x))), \ + (compile_ffs2((__x) >> 2) + 2)) + +#define compile_ffs8(__x) \ + __builtin_choose_expr(((__x) & 0xf), \ + (compile_ffs4((__x))), \ + (compile_ffs4((__x) >> 4) + 4)) + +#define compile_ffs16(__x) \ + __builtin_choose_expr(((__x) & 0xff), \ + (compile_ffs8((__x))), \ + (compile_ffs8((__x) >> 8) + 8)) + +#define compile_ffs32(__x) \ + __builtin_choose_expr(((__x) & 0xffff), \ + (compile_ffs16((__x))), \ + (compile_ffs16((__x) >> 16) + 16)) + +/* + * This macro will check the requirements for the FIELD{8,16,32} macros + * The mask should be a constant non-zero contiguous set of bits which + * does not exceed the given typelimit. + */ +#define FIELD_CHECK(__mask, __type) \ + BUILD_BUG_ON(!(__mask) || \ + !is_valid_mask(__mask) || \ + (__mask) != (__type)(__mask)) \ #define FIELD8(__mask) \ ({ \ - BUILD_BUG_ON(!(__mask) || \ - !is_valid_mask(__mask) || \ - (__mask) != (u8)(__mask)); \ + FIELD_CHECK(__mask, u8); \ (struct rt2x00_field8) { \ - __ffs(__mask), (__mask) \ + compile_ffs8(__mask), (__mask) \ }; \ }) #define FIELD16(__mask) \ ({ \ - BUILD_BUG_ON(!(__mask) || \ - !is_valid_mask(__mask) || \ - (__mask) != (u16)(__mask));\ + FIELD_CHECK(__mask, u16); \ (struct rt2x00_field16) { \ - __ffs(__mask), (__mask) \ + compile_ffs16(__mask), (__mask) \ }; \ }) #define FIELD32(__mask) \ ({ \ - BUILD_BUG_ON(!(__mask) || \ - !is_valid_mask(__mask) || \ - (__mask) != (u32)(__mask));\ + FIELD_CHECK(__mask, u32); \ (struct rt2x00_field32) { \ - __ffs(__mask), (__mask) \ + compile_ffs32(__mask), (__mask) \ }; \ }) -static inline void rt2x00_set_field32(u32 *reg, - const struct rt2x00_field32 field, - const u32 value) -{ - *reg &= ~(field.bit_mask); - *reg |= (value << field.bit_offset) & field.bit_mask; -} - -static inline u32 rt2x00_get_field32(const u32 reg, - const struct rt2x00_field32 field) -{ - return (reg & field.bit_mask) >> field.bit_offset; -} - -static inline void rt2x00_set_field16(u16 *reg, - const struct rt2x00_field16 field, - const u16 value) -{ - *reg &= ~(field.bit_mask); - *reg |= (value << field.bit_offset) & field.bit_mask; -} - -static inline u16 rt2x00_get_field16(const u16 reg, - const struct rt2x00_field16 field) -{ - return (reg & field.bit_mask) >> field.bit_offset; -} - -static inline void rt2x00_set_field8(u8 *reg, - const struct rt2x00_field8 field, - const u8 value) -{ - *reg &= ~(field.bit_mask); - *reg |= (value << field.bit_offset) & field.bit_mask; -} - -static inline u8 rt2x00_get_field8(const u8 reg, - const struct rt2x00_field8 field) -{ - return (reg & field.bit_mask) >> field.bit_offset; -} - -/* - * Device specific rate value. - * We will have to create the device specific rate value - * passed to the ieee80211 kernel. We need to make it a consist of - * multiple fields because we want to store more then 1 device specific - * values inside the value. - * 1 - rate, stored as 100 kbit/s. - * 2 - preamble, short_preamble enabled flag. - * 3 - MASK_RATE, which rates are enabled in this mode, this mask - * corresponds with the TX register format for the current device. - * 4 - plcp, 802.11b rates are device specific, - * 802.11g rates are set according to the ieee802.11a-1999 p.14. - * The bit to enable preamble is set in a seperate define. - */ -#define DEV_RATE FIELD32(0x000007ff) -#define DEV_PREAMBLE FIELD32(0x00000800) -#define DEV_RATEMASK FIELD32(0x00fff000) -#define DEV_PLCP FIELD32(0xff000000) - -/* - * Bitfields - */ -#define DEV_RATEBIT_1MB ( 1 << 0 ) -#define DEV_RATEBIT_2MB ( 1 << 1 ) -#define DEV_RATEBIT_5_5MB ( 1 << 2 ) -#define DEV_RATEBIT_11MB ( 1 << 3 ) -#define DEV_RATEBIT_6MB ( 1 << 4 ) -#define DEV_RATEBIT_9MB ( 1 << 5 ) -#define DEV_RATEBIT_12MB ( 1 << 6 ) -#define DEV_RATEBIT_18MB ( 1 << 7 ) -#define DEV_RATEBIT_24MB ( 1 << 8 ) -#define DEV_RATEBIT_36MB ( 1 << 9 ) -#define DEV_RATEBIT_48MB ( 1 << 10 ) -#define DEV_RATEBIT_54MB ( 1 << 11 ) - -/* - * Bitmasks for DEV_RATEMASK - */ -#define DEV_RATEMASK_1MB ( (DEV_RATEBIT_1MB << 1) -1 ) -#define DEV_RATEMASK_2MB ( (DEV_RATEBIT_2MB << 1) -1 ) -#define DEV_RATEMASK_5_5MB ( (DEV_RATEBIT_5_5MB << 1) -1 ) -#define DEV_RATEMASK_11MB ( (DEV_RATEBIT_11MB << 1) -1 ) -#define DEV_RATEMASK_6MB ( (DEV_RATEBIT_6MB << 1) -1 ) -#define DEV_RATEMASK_9MB ( (DEV_RATEBIT_9MB << 1) -1 ) -#define DEV_RATEMASK_12MB ( (DEV_RATEBIT_12MB << 1) -1 ) -#define DEV_RATEMASK_18MB ( (DEV_RATEBIT_18MB << 1) -1 ) -#define DEV_RATEMASK_24MB ( (DEV_RATEBIT_24MB << 1) -1 ) -#define DEV_RATEMASK_36MB ( (DEV_RATEBIT_36MB << 1) -1 ) -#define DEV_RATEMASK_48MB ( (DEV_RATEBIT_48MB << 1) -1 ) -#define DEV_RATEMASK_54MB ( (DEV_RATEBIT_54MB << 1) -1 ) +#define SET_FIELD(__reg, __type, __field, __value)\ +({ \ + typecheck(__type, __field); \ + *(__reg) &= ~((__field).bit_mask); \ + *(__reg) |= ((__value) << \ + ((__field).bit_offset)) & \ + ((__field).bit_mask); \ +}) -/* - * Bitmask groups of bitrates - */ -#define DEV_BASIC_RATEMASK \ - ( DEV_RATEMASK_11MB | \ - DEV_RATEBIT_6MB | DEV_RATEBIT_12MB | DEV_RATEBIT_24MB ) +#define GET_FIELD(__reg, __type, __field) \ +({ \ + typecheck(__type, __field); \ + ((__reg) & ((__field).bit_mask)) >> \ + ((__field).bit_offset); \ +}) -#define DEV_CCK_RATEMASK ( DEV_RATEMASK_11MB ) -#define DEV_OFDM_RATEMASK ( DEV_RATEMASK_54MB & ~DEV_CCK_RATEMASK ) +#define rt2x00_set_field32(__reg, __field, __value) \ + SET_FIELD(__reg, struct rt2x00_field32, __field, __value) +#define rt2x00_get_field32(__reg, __field) \ + GET_FIELD(__reg, struct rt2x00_field32, __field) -/* - * Macro's to set and get specific fields from the device specific val and val2 - * fields inside the ieee80211_rate entry. - */ -#define DEVICE_SET_RATE_FIELD(__value, __mask) \ - (int)( ((__value) << DEV_##__mask.bit_offset) & DEV_##__mask.bit_mask ) +#define rt2x00_set_field16(__reg, __field, __value) \ + SET_FIELD(__reg, struct rt2x00_field16, __field, __value) +#define rt2x00_get_field16(__reg, __field) \ + GET_FIELD(__reg, struct rt2x00_field16, __field) -#define DEVICE_GET_RATE_FIELD(__value, __mask) \ - (int)( ((__value) & DEV_##__mask.bit_mask) >> DEV_##__mask.bit_offset ) +#define rt2x00_set_field8(__reg, __field, __value) \ + SET_FIELD(__reg, struct rt2x00_field8, __field, __value) +#define rt2x00_get_field8(__reg, __field) \ + GET_FIELD(__reg, struct rt2x00_field8, __field) #endif /* RT2X00REG_H */ |