diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2400pci.h')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2400pci.h | 84 |
1 files changed, 46 insertions, 38 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h index 369aac6d033..0fd3a9d01a6 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.h +++ b/drivers/net/wireless/rt2x00/rt2400pci.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -13,9 +13,7 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + along with this program; if not, see <http://www.gnu.org/licenses/>. */ /* @@ -35,10 +33,8 @@ /* * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. + * Default offset is required for RSSI <-> dBm conversion. */ -#define MAX_SIGNAL 100 -#define MAX_RX_SSI -1 #define DEFAULT_RSSI_OFFSET 100 /* @@ -48,8 +44,15 @@ #define CSR_REG_SIZE 0x014c #define EEPROM_BASE 0x0000 #define EEPROM_SIZE 0x0100 +#define BBP_BASE 0x0000 #define BBP_SIZE 0x0020 -#define RF_SIZE 0x0010 +#define RF_BASE 0x0004 +#define RF_SIZE 0x000c + +/* + * Number of TX queues. + */ +#define NUM_TX_QUEUES 2 /* * Control/Status Registers(CSR). @@ -60,6 +63,7 @@ * CSR0: ASIC revision number. */ #define CSR0 0x0000 +#define CSR0_REVISION FIELD32(0x0000ffff) /* * CSR1: System control register. @@ -654,16 +658,26 @@ /* * GPIOCSR: GPIO control register. + * GPIOCSR_VALx: Actual GPIO pin x value + * GPIOCSR_DIRx: GPIO direction: 0 = output; 1 = input */ #define GPIOCSR 0x0120 -#define GPIOCSR_BIT0 FIELD32(0x00000001) -#define GPIOCSR_BIT1 FIELD32(0x00000002) -#define GPIOCSR_BIT2 FIELD32(0x00000004) -#define GPIOCSR_BIT3 FIELD32(0x00000008) -#define GPIOCSR_BIT4 FIELD32(0x00000010) -#define GPIOCSR_BIT5 FIELD32(0x00000020) -#define GPIOCSR_BIT6 FIELD32(0x00000040) -#define GPIOCSR_BIT7 FIELD32(0x00000080) +#define GPIOCSR_VAL0 FIELD32(0x00000001) +#define GPIOCSR_VAL1 FIELD32(0x00000002) +#define GPIOCSR_VAL2 FIELD32(0x00000004) +#define GPIOCSR_VAL3 FIELD32(0x00000008) +#define GPIOCSR_VAL4 FIELD32(0x00000010) +#define GPIOCSR_VAL5 FIELD32(0x00000020) +#define GPIOCSR_VAL6 FIELD32(0x00000040) +#define GPIOCSR_VAL7 FIELD32(0x00000080) +#define GPIOCSR_DIR0 FIELD32(0x00000100) +#define GPIOCSR_DIR1 FIELD32(0x00000200) +#define GPIOCSR_DIR2 FIELD32(0x00000400) +#define GPIOCSR_DIR3 FIELD32(0x00000800) +#define GPIOCSR_DIR4 FIELD32(0x00001000) +#define GPIOCSR_DIR5 FIELD32(0x00002000) +#define GPIOCSR_DIR6 FIELD32(0x00004000) +#define GPIOCSR_DIR7 FIELD32(0x00008000) /* * BBPPCSR: BBP Pin control register. @@ -803,8 +817,8 @@ /* * DMA descriptor defines. */ -#define TXD_DESC_SIZE ( 8 * sizeof(__le32) ) -#define RXD_DESC_SIZE ( 8 * sizeof(__le32) ) +#define TXD_DESC_SIZE (8 * sizeof(__le32)) +#define RXD_DESC_SIZE (8 * sizeof(__le32)) /* * TX descriptor format for TX, PRIO, ATIM and Beacon Ring. @@ -899,13 +913,13 @@ * Word2 */ #define RXD_W2_BUFFER_LENGTH FIELD32(0x0000ffff) -#define RXD_W2_SIGNAL FIELD32(0x00ff0000) -#define RXD_W2_RSSI FIELD32(0xff000000) +#define RXD_W2_BBR0 FIELD32(0x00ff0000) +#define RXD_W2_SIGNAL FIELD32(0xff000000) /* * Word3 */ -#define RXD_W3_BBR2 FIELD32(0x000000ff) +#define RXD_W3_RSSI FIELD32(0x000000ff) #define RXD_W3_BBR3 FIELD32(0x0000ff00) #define RXD_W3_BBR4 FIELD32(0x00ff0000) #define RXD_W3_BBR5 FIELD32(0xff000000) @@ -923,31 +937,25 @@ #define RXD_W7_RESERVED FIELD32(0xffffffff) /* - * Macro's for converting txpower from EEPROM to dscape value - * and from dscape value to register value. + * Macros for converting txpower from EEPROM to mac80211 value + * and from mac80211 value to register value. * NOTE: Logics in rt2400pci for txpower are reversed * compared to the other rt2x00 drivers. A higher txpower * value means that the txpower must be lowered. This is * important when converting the value coming from the - * dscape stack to the rt2400 acceptable value. + * mac80211 stack to the rt2400 acceptable value. */ #define MIN_TXPOWER 31 #define MAX_TXPOWER 62 #define DEFAULT_TXPOWER 39 -#define TXPOWER_FROM_DEV(__txpower) \ -({ \ - ((__txpower) > MAX_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \ - ((__txpower) < MIN_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \ - (((__txpower) - MAX_TXPOWER) + MIN_TXPOWER); \ -}) - -#define TXPOWER_TO_DEV(__txpower) \ -({ \ - (__txpower) += MIN_TXPOWER; \ - ((__txpower) <= MIN_TXPOWER) ? MAX_TXPOWER : \ - (((__txpower) >= MAX_TXPOWER) ? MIN_TXPOWER : \ - (MAX_TXPOWER - ((__txpower) - MIN_TXPOWER))); \ -}) +#define __CLAMP_TX(__txpower) \ + clamp_t(char, (__txpower), MIN_TXPOWER, MAX_TXPOWER) + +#define TXPOWER_FROM_DEV(__txpower) \ + ((__CLAMP_TX(__txpower) - MAX_TXPOWER) + MIN_TXPOWER) + +#define TXPOWER_TO_DEV(__txpower) \ + (MAX_TXPOWER - (__CLAMP_TX(__txpower) - MIN_TXPOWER)) #endif /* RT2400PCI_H */ |