diff options
Diffstat (limited to 'drivers/net/wireless/rsi/rsi_91x_usb.c')
| -rw-r--r-- | drivers/net/wireless/rsi/rsi_91x_usb.c | 587 |
1 files changed, 587 insertions, 0 deletions
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c new file mode 100644 index 00000000000..4c46e5631e2 --- /dev/null +++ b/drivers/net/wireless/rsi/rsi_91x_usb.c @@ -0,0 +1,587 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <linux/module.h> +#include "rsi_usb.h" + +/** + * rsi_usb_card_write() - This function writes to the USB Card. + * @adapter: Pointer to the adapter structure. + * @buf: Pointer to the buffer from where the data has to be taken. + * @len: Length to be written. + * @endpoint: Type of endpoint. + * + * Return: status: 0 on success, -1 on failure. + */ +static int rsi_usb_card_write(struct rsi_hw *adapter, + void *buf, + u16 len, + u8 endpoint) +{ + struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + int status; + s32 transfer; + + status = usb_bulk_msg(dev->usbdev, + usb_sndbulkpipe(dev->usbdev, + dev->bulkout_endpoint_addr[endpoint - 1]), + buf, + len, + &transfer, + HZ * 5); + + if (status < 0) { + rsi_dbg(ERR_ZONE, + "Card write failed with error code :%10d\n", status); + dev->write_fail = 1; + } + return status; +} + +/** + * rsi_write_multiple() - This function writes multiple bytes of information + * to the USB card. + * @adapter: Pointer to the adapter structure. + * @addr: Address of the register. + * @data: Pointer to the data that has to be written. + * @count: Number of multiple bytes to be written. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_write_multiple(struct rsi_hw *adapter, + u8 endpoint, + u8 *data, + u32 count) +{ + struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + u8 *seg = dev->tx_buffer; + + if (dev->write_fail) + return 0; + + if (endpoint == MGMT_EP) { + memset(seg, 0, RSI_USB_TX_HEAD_ROOM); + memcpy(seg + RSI_USB_TX_HEAD_ROOM, data, count); + } else { + seg = ((u8 *)data - RSI_USB_TX_HEAD_ROOM); + } + + return rsi_usb_card_write(adapter, + seg, + count + RSI_USB_TX_HEAD_ROOM, + endpoint); +} + +/** + * rsi_find_bulk_in_and_out_endpoints() - This function initializes the bulk + * endpoints to the device. + * @interface: Pointer to the USB interface structure. + * @adapter: Pointer to the adapter structure. + * + * Return: ret_val: 0 on success, -ENOMEM on failure. + */ +static int rsi_find_bulk_in_and_out_endpoints(struct usb_interface *interface, + struct rsi_hw *adapter) +{ + struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + __le16 buffer_size; + int ii, bep_found = 0; + + iface_desc = &(interface->altsetting[0]); + + for (ii = 0; ii < iface_desc->desc.bNumEndpoints; ++ii) { + endpoint = &(iface_desc->endpoint[ii].desc); + + if ((!(dev->bulkin_endpoint_addr)) && + (endpoint->bEndpointAddress & USB_DIR_IN) && + ((endpoint->bmAttributes & + USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK)) { + buffer_size = endpoint->wMaxPacketSize; + dev->bulkin_size = buffer_size; + dev->bulkin_endpoint_addr = + endpoint->bEndpointAddress; + } + + if (!dev->bulkout_endpoint_addr[bep_found] && + !(endpoint->bEndpointAddress & USB_DIR_IN) && + ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK)) { + dev->bulkout_endpoint_addr[bep_found] = + endpoint->bEndpointAddress; + buffer_size = endpoint->wMaxPacketSize; + dev->bulkout_size[bep_found] = buffer_size; + bep_found++; + } + + if (bep_found >= MAX_BULK_EP) + break; + } + + if (!(dev->bulkin_endpoint_addr) && + (dev->bulkout_endpoint_addr[0])) + return -EINVAL; + + return 0; +} + +/* rsi_usb_reg_read() - This function reads data from given register address. + * @usbdev: Pointer to the usb_device structure. + * @reg: Address of the register to be read. + * @value: Value to be read. + * @len: length of data to be read. + * + * Return: status: 0 on success, -1 on failure. + */ +static int rsi_usb_reg_read(struct usb_device *usbdev, + u32 reg, + u16 *value, + u16 len) +{ + u8 *buf; + int status = -ENOMEM; + + buf = kmalloc(0x04, GFP_KERNEL); + if (!buf) + return status; + + status = usb_control_msg(usbdev, + usb_rcvctrlpipe(usbdev, 0), + USB_VENDOR_REGISTER_READ, + USB_TYPE_VENDOR, + ((reg & 0xffff0000) >> 16), (reg & 0xffff), + (void *)buf, + len, + HZ * 5); + + *value = (buf[0] | (buf[1] << 8)); + if (status < 0) { + rsi_dbg(ERR_ZONE, + "%s: Reg read failed with error code :%d\n", + __func__, status); + } + kfree(buf); + + return status; +} + +/** + * rsi_usb_reg_write() - This function writes the given data into the given + * register address. + * @usbdev: Pointer to the usb_device structure. + * @reg: Address of the register. + * @value: Value to write. + * @len: Length of data to be written. + * + * Return: status: 0 on success, -1 on failure. + */ +static int rsi_usb_reg_write(struct usb_device *usbdev, + u32 reg, + u16 value, + u16 len) +{ + u8 *usb_reg_buf; + int status = -ENOMEM; + + usb_reg_buf = kmalloc(0x04, GFP_KERNEL); + if (!usb_reg_buf) + return status; + + usb_reg_buf[0] = (value & 0x00ff); + usb_reg_buf[1] = (value & 0xff00) >> 8; + usb_reg_buf[2] = 0x0; + usb_reg_buf[3] = 0x0; + + status = usb_control_msg(usbdev, + usb_sndctrlpipe(usbdev, 0), + USB_VENDOR_REGISTER_WRITE, + USB_TYPE_VENDOR, + ((reg & 0xffff0000) >> 16), + (reg & 0xffff), + (void *)usb_reg_buf, + len, + HZ * 5); + if (status < 0) { + rsi_dbg(ERR_ZONE, + "%s: Reg write failed with error code :%d\n", + __func__, status); + } + kfree(usb_reg_buf); + + return status; +} + +/** + * rsi_rx_done_handler() - This function is called when a packet is received + * from USB stack. This is callback to recieve done. + * @urb: Received URB. + * + * Return: None. + */ +static void rsi_rx_done_handler(struct urb *urb) +{ + struct rsi_hw *adapter = urb->context; + struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + + if (urb->status) + return; + + rsi_set_event(&dev->rx_thread.event); +} + +/** + * rsi_rx_urb_submit() - This function submits the given URB to the USB stack. + * @adapter: Pointer to the adapter structure. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_rx_urb_submit(struct rsi_hw *adapter) +{ + struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + struct urb *urb = dev->rx_usb_urb[0]; + int status; + + usb_fill_bulk_urb(urb, + dev->usbdev, + usb_rcvbulkpipe(dev->usbdev, + dev->bulkin_endpoint_addr), + urb->transfer_buffer, + 3000, + rsi_rx_done_handler, + adapter); + + status = usb_submit_urb(urb, GFP_KERNEL); + if (status) + rsi_dbg(ERR_ZONE, "%s: Failed in urb submission\n", __func__); + + return status; +} + +/** + * rsi_usb_write_register_multiple() - This function writes multiple bytes of + * information to multiple registers. + * @adapter: Pointer to the adapter structure. + * @addr: Address of the register. + * @data: Pointer to the data that has to be written. + * @count: Number of multiple bytes to be written on to the registers. + * + * Return: status: 0 on success, -1 on failure. + */ +int rsi_usb_write_register_multiple(struct rsi_hw *adapter, + u32 addr, + u8 *data, + u32 count) +{ + struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + u8 *buf; + u8 transfer; + int status = 0; + + buf = kzalloc(4096, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + while (count) { + transfer = (u8)(min_t(u32, count, 4096)); + memcpy(buf, data, transfer); + status = usb_control_msg(dev->usbdev, + usb_sndctrlpipe(dev->usbdev, 0), + USB_VENDOR_REGISTER_WRITE, + USB_TYPE_VENDOR, + ((addr & 0xffff0000) >> 16), + (addr & 0xffff), + (void *)buf, + transfer, + HZ * 5); + if (status < 0) { + rsi_dbg(ERR_ZONE, + "Reg write failed with error code :%d\n", + status); + } else { + count -= transfer; + data += transfer; + addr += transfer; + } + } + + kfree(buf); + return 0; +} + +/** + *rsi_usb_host_intf_write_pkt() - This function writes the packet to the + * USB card. + * @adapter: Pointer to the adapter structure. + * @pkt: Pointer to the data to be written on to the card. + * @len: Length of the data to be written on to the card. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_usb_host_intf_write_pkt(struct rsi_hw *adapter, + u8 *pkt, + u32 len) +{ + u32 queueno = ((pkt[1] >> 4) & 0xf); + u8 endpoint; + + endpoint = ((queueno == RSI_WIFI_MGMT_Q) ? MGMT_EP : DATA_EP); + + return rsi_write_multiple(adapter, + endpoint, + (u8 *)pkt, + len); +} + +/** + * rsi_deinit_usb_interface() - This function deinitializes the usb interface. + * @adapter: Pointer to the adapter structure. + * + * Return: None. + */ +static void rsi_deinit_usb_interface(struct rsi_hw *adapter) +{ + struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + + rsi_kill_thread(&dev->rx_thread); + kfree(adapter->priv->rx_data_pkt); + kfree(dev->tx_buffer); +} + +/** + * rsi_init_usb_interface() - This function initializes the usb interface. + * @adapter: Pointer to the adapter structure. + * @pfunction: Pointer to USB interface structure. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_init_usb_interface(struct rsi_hw *adapter, + struct usb_interface *pfunction) +{ + struct rsi_91x_usbdev *rsi_dev; + struct rsi_common *common = adapter->priv; + int status; + + rsi_dev = kzalloc(sizeof(*rsi_dev), GFP_KERNEL); + if (!rsi_dev) + return -ENOMEM; + + adapter->rsi_dev = rsi_dev; + rsi_dev->usbdev = interface_to_usbdev(pfunction); + + if (rsi_find_bulk_in_and_out_endpoints(pfunction, adapter)) + return -EINVAL; + + adapter->device = &pfunction->dev; + usb_set_intfdata(pfunction, adapter); + + common->rx_data_pkt = kmalloc(2048, GFP_KERNEL); + if (!common->rx_data_pkt) { + rsi_dbg(ERR_ZONE, "%s: Failed to allocate memory\n", + __func__); + return -ENOMEM; + } + + rsi_dev->tx_buffer = kmalloc(2048, GFP_ATOMIC); + rsi_dev->rx_usb_urb[0] = usb_alloc_urb(0, GFP_KERNEL); + rsi_dev->rx_usb_urb[0]->transfer_buffer = adapter->priv->rx_data_pkt; + rsi_dev->tx_blk_size = 252; + + /* Initializing function callbacks */ + adapter->rx_urb_submit = rsi_rx_urb_submit; + adapter->host_intf_write_pkt = rsi_usb_host_intf_write_pkt; + adapter->check_hw_queue_status = rsi_usb_check_queue_status; + adapter->determine_event_timeout = rsi_usb_event_timeout; + + rsi_init_event(&rsi_dev->rx_thread.event); + status = rsi_create_kthread(common, &rsi_dev->rx_thread, + rsi_usb_rx_thread, "RX-Thread"); + if (status) { + rsi_dbg(ERR_ZONE, "%s: Unable to init rx thrd\n", __func__); + goto fail; + } + +#ifdef CONFIG_RSI_DEBUGFS + /* In USB, one less than the MAX_DEBUGFS_ENTRIES entries is required */ + adapter->num_debugfs_entries = (MAX_DEBUGFS_ENTRIES - 1); +#endif + + rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__); + return 0; + +fail: + kfree(rsi_dev->tx_buffer); + kfree(common->rx_data_pkt); + return status; +} + +/** + * rsi_probe() - This function is called by kernel when the driver provided + * Vendor and device IDs are matched. All the initialization + * work is done here. + * @pfunction: Pointer to the USB interface structure. + * @id: Pointer to the usb_device_id structure. + * + * Return: 0 on success, -1 on failure. + */ +static int rsi_probe(struct usb_interface *pfunction, + const struct usb_device_id *id) +{ + struct rsi_hw *adapter; + struct rsi_91x_usbdev *dev; + u16 fw_status; + + rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__); + + adapter = rsi_91x_init(); + if (!adapter) { + rsi_dbg(ERR_ZONE, "%s: Failed to init os intf ops\n", + __func__); + return 1; + } + + if (rsi_init_usb_interface(adapter, pfunction)) { + rsi_dbg(ERR_ZONE, "%s: Failed to init usb interface\n", + __func__); + goto err; + } + + rsi_dbg(ERR_ZONE, "%s: Initialized os intf ops\n", __func__); + + dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; + + if (rsi_usb_reg_read(dev->usbdev, FW_STATUS_REG, &fw_status, 2) < 0) + goto err1; + else + fw_status &= 1; + + if (!fw_status) { + if (rsi_usb_device_init(adapter->priv)) { + rsi_dbg(ERR_ZONE, "%s: Failed in device init\n", + __func__); + goto err1; + } + + if (rsi_usb_reg_write(dev->usbdev, + USB_INTERNAL_REG_1, + RSI_USB_READY_MAGIC_NUM, 1) < 0) + goto err1; + rsi_dbg(INIT_ZONE, "%s: Performed device init\n", __func__); + } + + if (rsi_rx_urb_submit(adapter)) + goto err1; + + return 0; +err1: + rsi_deinit_usb_interface(adapter); +err: + rsi_91x_deinit(adapter); + rsi_dbg(ERR_ZONE, "%s: Failed in probe...Exiting\n", __func__); + return 1; +} + +/** + * rsi_disconnect() - This function performs the reverse of the probe function, + * it deintialize the driver structure. + * @pfunction: Pointer to the USB interface structure. + * + * Return: None. + */ +static void rsi_disconnect(struct usb_interface *pfunction) +{ + struct rsi_hw *adapter = usb_get_intfdata(pfunction); + + if (!adapter) + return; + + rsi_mac80211_detach(adapter); + rsi_deinit_usb_interface(adapter); + rsi_91x_deinit(adapter); + + rsi_dbg(INFO_ZONE, "%s: Deinitialization completed\n", __func__); +} + +#ifdef CONFIG_PM +static int rsi_suspend(struct usb_interface *intf, pm_message_t message) +{ + /* Not yet implemented */ + return -ENOSYS; +} + +static int rsi_resume(struct usb_interface *intf) +{ + /* Not yet implemented */ + return -ENOSYS; +} +#endif + +static const struct usb_device_id rsi_dev_table[] = { + { USB_DEVICE(0x0303, 0x0100) }, + { USB_DEVICE(0x041B, 0x0301) }, + { USB_DEVICE(0x041B, 0x0201) }, + { USB_DEVICE(0x041B, 0x9330) }, + { /* Blank */}, +}; + +static struct usb_driver rsi_driver = { + .name = "RSI-USB WLAN", + .probe = rsi_probe, + .disconnect = rsi_disconnect, + .id_table = rsi_dev_table, +#ifdef CONFIG_PM + .suspend = rsi_suspend, + .resume = rsi_resume, +#endif +}; + +/** + * rsi_module_init() - This function registers the client driver. + * @void: Void. + * + * Return: 0 on success. + */ +static int rsi_module_init(void) +{ + usb_register(&rsi_driver); + rsi_dbg(INIT_ZONE, "%s: Registering driver\n", __func__); + return 0; +} + +/** + * rsi_module_exit() - This function unregisters the client driver. + * @void: Void. + * + * Return: None. + */ +static void rsi_module_exit(void) +{ + usb_deregister(&rsi_driver); + rsi_dbg(INFO_ZONE, "%s: Unregistering driver\n", __func__); +} + +module_init(rsi_module_init); +module_exit(rsi_module_exit); + +MODULE_AUTHOR("Redpine Signals Inc"); +MODULE_DESCRIPTION("Common USB layer for RSI drivers"); +MODULE_SUPPORTED_DEVICE("RSI-91x"); +MODULE_DEVICE_TABLE(usb, rsi_dev_table); +MODULE_FIRMWARE(FIRMWARE_RSI9113); +MODULE_VERSION("0.1"); +MODULE_LICENSE("Dual BSD/GPL"); |