aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/p54
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/p54')
-rw-r--r--drivers/net/wireless/p54/Kconfig4
-rw-r--r--drivers/net/wireless/p54/eeprom.c1
-rw-r--r--drivers/net/wireless/p54/fwio.c5
-rw-r--r--drivers/net/wireless/p54/led.c1
-rw-r--r--drivers/net/wireless/p54/main.c9
-rw-r--r--drivers/net/wireless/p54/net2280.h3
-rw-r--r--drivers/net/wireless/p54/p54pci.c9
-rw-r--r--drivers/net/wireless/p54/p54spi.c45
-rw-r--r--drivers/net/wireless/p54/p54usb.c21
-rw-r--r--drivers/net/wireless/p54/txrx.c9
10 files changed, 40 insertions, 67 deletions
diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
index 0ec55b50798..cdafb8c73e8 100644
--- a/drivers/net/wireless/p54/Kconfig
+++ b/drivers/net/wireless/p54/Kconfig
@@ -1,6 +1,6 @@
config P54_COMMON
tristate "Softmac Prism54 support"
- depends on MAC80211 && EXPERIMENTAL
+ depends on MAC80211
select FW_LOADER
select CRC_CCITT
---help---
@@ -41,7 +41,7 @@ config P54_PCI
config P54_SPI
tristate "Prism54 SPI (stlc45xx) support"
- depends on P54_COMMON && SPI_MASTER && GENERIC_HARDIRQS
+ depends on P54_COMMON && SPI_MASTER
---help---
This driver is for stlc4550 or stlc4560 based wireless chips
such as Nokia's N800/N810 Portable Internet Tablet.
diff --git a/drivers/net/wireless/p54/eeprom.c b/drivers/net/wireless/p54/eeprom.c
index d43e3740e45..0fe67d2da20 100644
--- a/drivers/net/wireless/p54/eeprom.c
+++ b/drivers/net/wireless/p54/eeprom.c
@@ -16,7 +16,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
#include <linux/sort.h>
diff --git a/drivers/net/wireless/p54/fwio.c b/drivers/net/wireless/p54/fwio.c
index 9ba85106eec..bc065e8e348 100644
--- a/drivers/net/wireless/p54/fwio.c
+++ b/drivers/net/wireless/p54/fwio.c
@@ -16,7 +16,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
@@ -402,7 +401,7 @@ int p54_scan(struct p54_common *priv, u16 mode, u16 dwell)
struct p54_rssi_db_entry *rssi_data;
unsigned int i;
void *entry;
- __le16 freq = cpu_to_le16(priv->hw->conf.channel->center_freq);
+ __le16 freq = cpu_to_le16(priv->hw->conf.chandef.chan->center_freq);
skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*head) +
2 + sizeof(*iq_autocal) + sizeof(*body) +
@@ -532,7 +531,7 @@ int p54_scan(struct p54_common *priv, u16 mode, u16 dwell)
err:
wiphy_err(priv->hw->wiphy, "frequency change to channel %d failed.\n",
ieee80211_frequency_to_channel(
- priv->hw->conf.channel->center_freq));
+ priv->hw->conf.chandef.chan->center_freq));
dev_kfree_skb_any(skb);
return -EINVAL;
diff --git a/drivers/net/wireless/p54/led.c b/drivers/net/wireless/p54/led.c
index 3837e1eec5f..1f6fd5ff553 100644
--- a/drivers/net/wireless/p54/led.c
+++ b/drivers/net/wireless/p54/led.c
@@ -16,7 +16,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c
index aadda99989c..7be3a483964 100644
--- a/drivers/net/wireless/p54/main.c
+++ b/drivers/net/wireless/p54/main.c
@@ -16,7 +16,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
@@ -340,7 +339,7 @@ static int p54_config(struct ieee80211_hw *dev, u32 changed)
* TODO: Use the LM_SCAN_TRAP to determine the current
* operating channel.
*/
- priv->curchan = priv->hw->conf.channel;
+ priv->curchan = priv->hw->conf.chandef.chan;
p54_reset_stats(priv);
WARN_ON(p54_fetch_statistics(priv));
}
@@ -480,7 +479,7 @@ static void p54_bss_info_changed(struct ieee80211_hw *dev,
p54_set_edcf(priv);
}
if (changed & BSS_CHANGED_BASIC_RATES) {
- if (dev->conf.channel->band == IEEE80211_BAND_5GHZ)
+ if (dev->conf.chandef.chan->band == IEEE80211_BAND_5GHZ)
priv->basic_rate_mask = (info->basic_rates << 4);
else
priv->basic_rate_mask = info->basic_rates;
@@ -670,7 +669,8 @@ static unsigned int p54_flush_count(struct p54_common *priv)
return total;
}
-static void p54_flush(struct ieee80211_hw *dev, bool drop)
+static void p54_flush(struct ieee80211_hw *dev, struct ieee80211_vif *vif,
+ u32 queues, bool drop)
{
struct p54_common *priv = dev->priv;
unsigned int total, i;
@@ -757,7 +757,6 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_MESH_POINT);
- dev->channel_change_time = 1000; /* TODO: find actual value */
priv->beacon_req_id = cpu_to_le32(0);
priv->tx_stats[P54_QUEUE_BEACON].limit = 1;
priv->tx_stats[P54_QUEUE_FWSCAN].limit = 1;
diff --git a/drivers/net/wireless/p54/net2280.h b/drivers/net/wireless/p54/net2280.h
index e3ed893b5aa..aedfaf24f38 100644
--- a/drivers/net/wireless/p54/net2280.h
+++ b/drivers/net/wireless/p54/net2280.h
@@ -20,8 +20,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
/*-------------------------------------------------------------------------*/
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index 933e5d94193..d411de40905 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -13,7 +13,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/firmware.h>
@@ -559,6 +558,7 @@ static int p54p_probe(struct pci_dev *pdev,
mem_len = pci_resource_len(pdev, 0);
if (mem_len < sizeof(struct p54p_csr)) {
dev_err(&pdev->dev, "Too short PCI resources\n");
+ err = -ENODEV;
goto err_disable_dev;
}
@@ -568,8 +568,10 @@ static int p54p_probe(struct pci_dev *pdev,
goto err_disable_dev;
}
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) ||
- pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (!err)
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
dev_err(&pdev->dev, "No suitable DMA available\n");
goto err_free_reg;
}
@@ -628,7 +630,6 @@ static int p54p_probe(struct pci_dev *pdev,
iounmap(priv->map);
err_free_dev:
- pci_set_drvdata(pdev, NULL);
p54_free_common(dev);
err_free_reg:
diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
index 4fd49a007b5..de15171e2cd 100644
--- a/drivers/net/wireless/p54/p54spi.c
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -42,8 +42,7 @@
MODULE_FIRMWARE("3826.arm");
-/*
- * gpios should be handled in board files and provided via platform data,
+/* gpios should be handled in board files and provided via platform data,
* but because it's currently impossible for p54spi to have a header file
* in include/linux, let's use module paramaters for now
*/
@@ -191,8 +190,7 @@ static int p54spi_request_eeprom(struct ieee80211_hw *dev)
const struct firmware *eeprom;
int ret;
- /*
- * allow users to customize their eeprom.
+ /* allow users to customize their eeprom.
*/
ret = request_firmware(&eeprom, "3826.eeprom", &priv->spi->dev);
@@ -285,8 +283,7 @@ static void p54spi_power_on(struct p54s_priv *priv)
gpio_set_value(p54spi_gpio_power, 1);
enable_irq(gpio_to_irq(p54spi_gpio_irq));
- /*
- * need to wait a while before device can be accessed, the length
+ /* need to wait a while before device can be accessed, the length
* is just a guess
*/
msleep(10);
@@ -365,7 +362,8 @@ static int p54spi_rx(struct p54s_priv *priv)
/* Firmware may insert up to 4 padding bytes after the lmac header,
* but it does not amend the size of SPI data transfer.
* Such packets has correct data size in header, thus referencing
- * past the end of allocated skb. Reserve extra 4 bytes for this case */
+ * past the end of allocated skb. Reserve extra 4 bytes for this case
+ */
skb = dev_alloc_skb(len + 4);
if (!skb) {
p54spi_sleep(priv);
@@ -383,7 +381,8 @@ static int p54spi_rx(struct p54s_priv *priv)
}
p54spi_sleep(priv);
/* Put additional bytes to compensate for the possible
- * alignment-caused truncation */
+ * alignment-caused truncation
+ */
skb_put(skb, 4);
if (p54_rx(priv->hw, skb) == 0)
@@ -396,7 +395,7 @@ static int p54spi_rx(struct p54s_priv *priv)
static irqreturn_t p54spi_interrupt(int irq, void *config)
{
struct spi_device *spi = config;
- struct p54s_priv *priv = dev_get_drvdata(&spi->dev);
+ struct p54s_priv *priv = spi_get_drvdata(spi);
ieee80211_queue_work(priv->hw, &priv->work);
@@ -609,7 +608,7 @@ static int p54spi_probe(struct spi_device *spi)
priv = hw->priv;
priv->hw = hw;
- dev_set_drvdata(&spi->dev, priv);
+ spi_set_drvdata(spi, priv);
priv->spi = spi;
spi->bits_per_word = 16;
@@ -637,7 +636,7 @@ static int p54spi_probe(struct spi_device *spi)
gpio_direction_input(p54spi_gpio_irq);
ret = request_irq(gpio_to_irq(p54spi_gpio_irq),
- p54spi_interrupt, IRQF_DISABLED, "p54spi",
+ p54spi_interrupt, 0, "p54spi",
priv->spi);
if (ret < 0) {
dev_err(&priv->spi->dev, "request_irq() failed");
@@ -685,7 +684,7 @@ err_free:
static int p54spi_remove(struct spi_device *spi)
{
- struct p54s_priv *priv = dev_get_drvdata(&spi->dev);
+ struct p54s_priv *priv = spi_get_drvdata(spi);
p54_unregister_common(priv->hw);
@@ -713,27 +712,7 @@ static struct spi_driver p54spi_driver = {
.remove = p54spi_remove,
};
-static int __init p54spi_init(void)
-{
- int ret;
-
- ret = spi_register_driver(&p54spi_driver);
- if (ret < 0) {
- printk(KERN_ERR "failed to register SPI driver: %d", ret);
- goto out;
- }
-
-out:
- return ret;
-}
-
-static void __exit p54spi_exit(void)
-{
- spi_unregister_driver(&p54spi_driver);
-}
-
-module_init(p54spi_init);
-module_exit(p54spi_exit);
+module_spi_driver(p54spi_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>");
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 800a16526c8..043bd1c23c1 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -12,7 +12,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
#include <linux/usb.h>
#include <linux/pci.h>
#include <linux/slab.h>
@@ -83,9 +82,10 @@ static struct usb_device_id p54u_table[] = {
{USB_DEVICE(0x06a9, 0x000e)}, /* Westell 802.11g USB (A90-211WG-01) */
{USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */
{USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */
+ {USB_DEVICE(0x07aa, 0x0020)}, /* Corega WLUSB2GTST USB */
{USB_DEVICE(0x0803, 0x4310)}, /* Zoom 4410a */
- {USB_DEVICE(0x083a, 0x4503)}, /* T-Com Sinus 154 data II */
{USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */
+ {USB_DEVICE(0x083a, 0x4531)}, /* T-Com Sinus 154 data II */
{USB_DEVICE(0x083a, 0xc501)}, /* Zoom Wireless-G 4410 */
{USB_DEVICE(0x083a, 0xf503)}, /* Accton FD7050E ver 1010ec */
{USB_DEVICE(0x0846, 0x4240)}, /* Netgear WG111 (v2) */
@@ -510,13 +510,10 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
return err;
tmp = buf = kmalloc(P54U_FW_BLOCK, GFP_KERNEL);
- if (!buf) {
- dev_err(&priv->udev->dev, "(p54usb) cannot allocate firmware"
- "upload buffer!\n");
+ if (!buf)
return -ENOMEM;
- }
- left = block_size = min((size_t)P54U_FW_BLOCK, priv->fw->size);
+ left = block_size = min_t(size_t, P54U_FW_BLOCK, priv->fw->size);
strcpy(buf, p54u_firmware_upload_3887);
left -= strlen(p54u_firmware_upload_3887);
tmp += strlen(p54u_firmware_upload_3887);
@@ -637,11 +634,8 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
const u8 *data;
buf = kmalloc(512, GFP_KERNEL);
- if (!buf) {
- dev_err(&priv->udev->dev, "(p54usb) firmware buffer "
- "alloc failed!\n");
+ if (!buf)
return -ENOMEM;
- }
#define P54U_WRITE(type, addr, data) \
do {\
@@ -985,6 +979,7 @@ static int p54u_load_firmware(struct ieee80211_hw *dev,
if (err) {
dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s "
"(%d)!\n", p54u_fwlist[i].fw, err);
+ usb_put_dev(udev);
}
return err;
@@ -1058,6 +1053,10 @@ static int p54u_probe(struct usb_interface *intf,
priv->upload_fw = p54u_upload_firmware_net2280;
}
err = p54u_load_firmware(dev, intf);
+ if (err) {
+ usb_put_dev(udev);
+ p54_free_common(dev);
+ }
return err;
}
diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c
index 12f0a34477f..153c61539ec 100644
--- a/drivers/net/wireless/p54/txrx.c
+++ b/drivers/net/wireless/p54/txrx.c
@@ -17,7 +17,6 @@
*/
#include <linux/export.h>
-#include <linux/init.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
#include <asm/div64.h>
@@ -308,7 +307,7 @@ static void p54_pspoll_workaround(struct p54_common *priv, struct sk_buff *skb)
return;
/* only consider beacons from the associated BSSID */
- if (!ether_addr_equal(hdr->addr3, priv->bssid))
+ if (!ether_addr_equal_64bits(hdr->addr3, priv->bssid))
return;
tim = p54_find_ie(skb, WLAN_EID_TIM);
@@ -354,13 +353,13 @@ static int p54_rx_data(struct p54_common *priv, struct sk_buff *skb)
rx_status->signal = p54_rssi_to_dbm(priv, hdr->rssi);
if (hdr->rate & 0x10)
rx_status->flag |= RX_FLAG_SHORTPRE;
- if (priv->hw->conf.channel->band == IEEE80211_BAND_5GHZ)
+ if (priv->hw->conf.chandef.chan->band == IEEE80211_BAND_5GHZ)
rx_status->rate_idx = (rate < 4) ? 0 : rate - 4;
else
rx_status->rate_idx = rate;
rx_status->freq = freq;
- rx_status->band = priv->hw->conf.channel->band;
+ rx_status->band = priv->hw->conf.chandef.chan->band;
rx_status->antenna = hdr->antenna;
tsf32 = le32_to_cpu(hdr->tsf32);
@@ -587,7 +586,7 @@ static void p54_rx_stats(struct p54_common *priv, struct sk_buff *skb)
chan = priv->curchan;
if (chan) {
struct survey_info *survey = &priv->survey[chan->hw_value];
- survey->noise = clamp_t(s8, priv->noise, -128, 127);
+ survey->noise = clamp(priv->noise, -128, 127);
survey->channel_time = priv->survey_raw.active;
survey->channel_time_tx = priv->survey_raw.tx;
survey->channel_time_busy = priv->survey_raw.tx +
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-09 18:20:52 +0000