aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/p54
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/p54')
-rw-r--r--drivers/net/wireless/p54/Kconfig33
-rw-r--r--drivers/net/wireless/p54/eeprom.c431
-rw-r--r--drivers/net/wireless/p54/eeprom.h19
-rw-r--r--drivers/net/wireless/p54/fwio.c119
-rw-r--r--drivers/net/wireless/p54/led.c9
-rw-r--r--drivers/net/wireless/p54/lmac.h6
-rw-r--r--drivers/net/wireless/p54/main.c264
-rw-r--r--drivers/net/wireless/p54/net2280.h19
-rw-r--r--drivers/net/wireless/p54/p54.h28
-rw-r--r--drivers/net/wireless/p54/p54pci.c182
-rw-r--r--drivers/net/wireless/p54/p54pci.h8
-rw-r--r--drivers/net/wireless/p54/p54spi.c96
-rw-r--r--drivers/net/wireless/p54/p54spi.h2
-rw-r--r--drivers/net/wireless/p54/p54spi_eeprom.h9
-rw-r--r--drivers/net/wireless/p54/p54usb.c272
-rw-r--r--drivers/net/wireless/p54/p54usb.h9
-rw-r--r--drivers/net/wireless/p54/txrx.c194
17 files changed, 1204 insertions, 496 deletions
diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
index b0342a520bf..cdafb8c73e8 100644
--- a/drivers/net/wireless/p54/Kconfig
+++ b/drivers/net/wireless/p54/Kconfig
@@ -1,14 +1,15 @@
config P54_COMMON
tristate "Softmac Prism54 support"
- depends on MAC80211 && EXPERIMENTAL
+ depends on MAC80211
select FW_LOADER
+ select CRC_CCITT
---help---
This is common code for isl38xx/stlc45xx based modules.
This module does nothing by itself - the USB/PCI/SPI front-ends
also need to be enabled in order to support any devices.
These devices require softmac firmware which can be found at
- http://prism54.org/
+ <http://wireless.kernel.org/en/users/Drivers/p54>
If you choose to build a module, it'll be called p54common.
@@ -20,7 +21,7 @@ config P54_USB
This driver is for USB isl38xx based wireless cards.
These devices require softmac firmware which can be found at
- http://prism54.org/
+ <http://wireless.kernel.org/en/users/Drivers/p54>
If you choose to build a module, it'll be called p54usb.
@@ -34,20 +35,36 @@ config P54_PCI
supported by the fullmac driver/firmware.
This driver requires softmac firmware which can be found at
- http://prism54.org/
+ <http://wireless.kernel.org/en/users/Drivers/p54>
If you choose to build a module, it'll be called p54pci.
config P54_SPI
tristate "Prism54 SPI (stlc45xx) support"
- depends on P54_COMMON && SPI_MASTER && GENERIC_HARDIRQS
+ depends on P54_COMMON && SPI_MASTER
---help---
- This driver is for stlc4550 or stlc4560 based wireless chips.
- This driver is experimental, untested and will probably only work on
- Nokia's N800/N810 Portable Internet Tablet.
+ This driver is for stlc4550 or stlc4560 based wireless chips
+ such as Nokia's N800/N810 Portable Internet Tablet.
If you choose to build a module, it'll be called p54spi.
+config P54_SPI_DEFAULT_EEPROM
+ bool "Include fallback EEPROM blob"
+ depends on P54_SPI
+ default n
+ ---help---
+ Unlike the PCI or USB devices, the SPI variants don't have
+ a dedicated EEPROM chip to store all device specific values
+ for calibration, country and interface settings.
+
+ The driver will try to load the image "3826.eeprom", if the
+ file is put at the right place. (usually /lib/firmware.)
+
+ Only if this request fails, this option will provide a
+ backup set of generic values to get the device working.
+
+ Enabling this option adds about 4k to p54spi.
+
config P54_LEDS
bool
depends on P54_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = P54_COMMON)
diff --git a/drivers/net/wireless/p54/eeprom.c b/drivers/net/wireless/p54/eeprom.c
index 187e263b045..0fe67d2da20 100644
--- a/drivers/net/wireless/p54/eeprom.c
+++ b/drivers/net/wireless/p54/eeprom.c
@@ -16,13 +16,14 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
#include <linux/sort.h>
#include <linux/slab.h>
#include <net/mac80211.h>
+#include <linux/crc-ccitt.h>
+#include <linux/export.h>
#include "p54.h"
#include "eeprom.h"
@@ -54,6 +55,17 @@ static struct ieee80211_rate p54_arates[] = {
{ .bitrate = 540, .hw_value = 11, },
};
+static struct p54_rssi_db_entry p54_rssi_default = {
+ /*
+ * The defaults are taken from usb-logs of the
+ * vendor driver. So, they should be safe to
+ * use in case we can't get a match from the
+ * rssi <-> dBm conversion database.
+ */
+ .mul = 130,
+ .add = -398,
+};
+
#define CHAN_HAS_CAL BIT(0)
#define CHAN_HAS_LIMIT BIT(1)
#define CHAN_HAS_CURVE BIT(2)
@@ -63,6 +75,7 @@ struct p54_channel_entry {
u16 freq;
u16 data;
int index;
+ int max_power;
enum ieee80211_band band;
};
@@ -86,13 +99,27 @@ static int p54_get_band_from_freq(u16 freq)
return -1;
}
+static int same_band(u16 freq, u16 freq2)
+{
+ return p54_get_band_from_freq(freq) == p54_get_band_from_freq(freq2);
+}
+
static int p54_compare_channels(const void *_a,
const void *_b)
{
const struct p54_channel_entry *a = _a;
const struct p54_channel_entry *b = _b;
- return a->index - b->index;
+ return a->freq - b->freq;
+}
+
+static int p54_compare_rssichan(const void *_a,
+ const void *_b)
+{
+ const struct p54_rssi_db_entry *a = _a;
+ const struct p54_rssi_db_entry *b = _b;
+
+ return a->freq - b->freq;
}
static int p54_fill_band_bitrates(struct ieee80211_hw *dev,
@@ -119,6 +146,7 @@ static int p54_fill_band_bitrates(struct ieee80211_hw *dev,
static int p54_generate_band(struct ieee80211_hw *dev,
struct p54_channel_list *list,
+ unsigned int *chan_num,
enum ieee80211_band band)
{
struct p54_common *priv = dev->priv;
@@ -144,33 +172,41 @@ static int p54_generate_band(struct ieee80211_hw *dev,
for (i = 0, j = 0; (j < list->band_channel_num[band]) &&
(i < list->entries); i++) {
+ struct p54_channel_entry *chan = &list->channels[i];
+ struct ieee80211_channel *dest = &tmp->channels[j];
- if (list->channels[i].band != band)
+ if (chan->band != band)
continue;
- if (list->channels[i].data != CHAN_HAS_ALL) {
- printk(KERN_ERR "%s:%s%s%s is/are missing for "
- "channel:%d [%d MHz].\n",
- wiphy_name(dev->wiphy),
- (list->channels[i].data & CHAN_HAS_CAL ? "" :
- " [iqauto calibration data]"),
- (list->channels[i].data & CHAN_HAS_LIMIT ? "" :
- " [output power limits]"),
- (list->channels[i].data & CHAN_HAS_CURVE ? "" :
- " [curve data]"),
- list->channels[i].index, list->channels[i].freq);
+ if (chan->data != CHAN_HAS_ALL) {
+ wiphy_err(dev->wiphy, "%s%s%s is/are missing for "
+ "channel:%d [%d MHz].\n",
+ (chan->data & CHAN_HAS_CAL ? "" :
+ " [iqauto calibration data]"),
+ (chan->data & CHAN_HAS_LIMIT ? "" :
+ " [output power limits]"),
+ (chan->data & CHAN_HAS_CURVE ? "" :
+ " [curve data]"),
+ chan->index, chan->freq);
continue;
}
- tmp->channels[j].band = list->channels[i].band;
- tmp->channels[j].center_freq = list->channels[i].freq;
+ dest->band = chan->band;
+ dest->center_freq = chan->freq;
+ dest->max_power = chan->max_power;
+ priv->survey[*chan_num].channel = &tmp->channels[j];
+ priv->survey[*chan_num].filled = SURVEY_INFO_NOISE_DBM |
+ SURVEY_INFO_CHANNEL_TIME |
+ SURVEY_INFO_CHANNEL_TIME_BUSY |
+ SURVEY_INFO_CHANNEL_TIME_TX;
+ dest->hw_value = (*chan_num);
j++;
+ (*chan_num)++;
}
if (j == 0) {
- printk(KERN_ERR "%s: Disabling totally damaged %s band.\n",
- wiphy_name(dev->wiphy), (band == IEEE80211_BAND_2GHZ) ?
- "2 GHz" : "5 GHz");
+ wiphy_err(dev->wiphy, "Disabling totally damaged %d GHz band\n",
+ (band == IEEE80211_BAND_2GHZ) ? 2 : 5);
ret = -ENODATA;
goto err_out;
@@ -195,10 +231,11 @@ err_out:
return ret;
}
-static void p54_update_channel_param(struct p54_channel_list *list,
- u16 freq, u16 data)
+static struct p54_channel_entry *p54_update_channel_param(struct p54_channel_list *list,
+ u16 freq, u16 data)
{
- int band, i;
+ int i;
+ struct p54_channel_entry *entry = NULL;
/*
* usually all lists in the eeprom are mostly sorted.
@@ -207,30 +244,78 @@ static void p54_update_channel_param(struct p54_channel_list *list,
*/
for (i = list->entries; i >= 0; i--) {
if (freq == list->channels[i].freq) {
- list->channels[i].data |= data;
+ entry = &list->channels[i];
break;
}
}
if ((i < 0) && (list->entries < list->max_entries)) {
/* entry does not exist yet. Initialize a new one. */
- band = p54_get_band_from_freq(freq);
+ int band = p54_get_band_from_freq(freq);
/*
* filter out frequencies which don't belong into
* any supported band.
*/
- if (band < 0)
- return ;
+ if (band >= 0) {
+ i = list->entries++;
+ list->band_channel_num[band]++;
+
+ entry = &list->channels[i];
+ entry->freq = freq;
+ entry->band = band;
+ entry->index = ieee80211_frequency_to_channel(freq);
+ entry->max_power = 0;
+ entry->data = 0;
+ }
+ }
+
+ if (entry)
+ entry->data |= data;
+
+ return entry;
+}
+
+static int p54_get_maxpower(struct p54_common *priv, void *data)
+{
+ switch (priv->rxhw & PDR_SYNTH_FRONTEND_MASK) {
+ case PDR_SYNTH_FRONTEND_LONGBOW: {
+ struct pda_channel_output_limit_longbow *pda = data;
+ int j;
+ u16 rawpower = 0;
+ pda = data;
+ for (j = 0; j < ARRAY_SIZE(pda->point); j++) {
+ struct pda_channel_output_limit_point_longbow *point =
+ &pda->point[j];
+ rawpower = max_t(u16,
+ rawpower, le16_to_cpu(point->val_qpsk));
+ rawpower = max_t(u16,
+ rawpower, le16_to_cpu(point->val_bpsk));
+ rawpower = max_t(u16,
+ rawpower, le16_to_cpu(point->val_16qam));
+ rawpower = max_t(u16,
+ rawpower, le16_to_cpu(point->val_64qam));
+ }
+ /* longbow seems to use 1/16 dBm units */
+ return rawpower / 16;
+ }
- i = list->entries++;
- list->band_channel_num[band]++;
+ case PDR_SYNTH_FRONTEND_DUETTE3:
+ case PDR_SYNTH_FRONTEND_DUETTE2:
+ case PDR_SYNTH_FRONTEND_FRISBEE:
+ case PDR_SYNTH_FRONTEND_XBOW: {
+ struct pda_channel_output_limit *pda = data;
+ u8 rawpower = 0;
+ rawpower = max(rawpower, pda->val_qpsk);
+ rawpower = max(rawpower, pda->val_bpsk);
+ rawpower = max(rawpower, pda->val_16qam);
+ rawpower = max(rawpower, pda->val_64qam);
+ /* raw values are in 1/4 dBm units */
+ return rawpower / 4;
+ }
- list->channels[i].freq = freq;
- list->channels[i].data = data;
- list->channels[i].band = band;
- list->channels[i].index = ieee80211_frequency_to_channel(freq);
- /* TODO: parse output_limit and fill max_power */
+ default:
+ return 20;
}
}
@@ -238,15 +323,15 @@ static int p54_generate_channel_lists(struct ieee80211_hw *dev)
{
struct p54_common *priv = dev->priv;
struct p54_channel_list *list;
- unsigned int i, j, max_channel_num;
+ unsigned int i, j, k, max_channel_num;
int ret = 0;
u16 freq;
if ((priv->iq_autocal_len != priv->curve_data->entries) ||
(priv->iq_autocal_len != priv->output_limit->entries))
- printk(KERN_ERR "%s: Unsupported or damaged EEPROM detected. "
- "You may not be able to use all channels.\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy,
+ "Unsupported or damaged EEPROM detected. "
+ "You may not be able to use all channels.\n");
max_channel_num = max_t(unsigned int, priv->output_limit->entries,
priv->iq_autocal_len);
@@ -258,12 +343,21 @@ static int p54_generate_channel_lists(struct ieee80211_hw *dev)
ret = -ENOMEM;
goto free;
}
+ priv->chan_num = max_channel_num;
+ priv->survey = kzalloc(sizeof(struct survey_info) * max_channel_num,
+ GFP_KERNEL);
+ if (!priv->survey) {
+ ret = -ENOMEM;
+ goto free;
+ }
list->max_entries = max_channel_num;
list->channels = kzalloc(sizeof(struct p54_channel_entry) *
max_channel_num, GFP_KERNEL);
- if (!list->channels)
+ if (!list->channels) {
+ ret = -ENOMEM;
goto free;
+ }
for (i = 0; i < max_channel_num; i++) {
if (i < priv->iq_autocal_len) {
@@ -272,12 +366,19 @@ static int p54_generate_channel_lists(struct ieee80211_hw *dev)
}
if (i < priv->output_limit->entries) {
- freq = le16_to_cpup((__le16 *) (i *
- priv->output_limit->entry_size +
- priv->output_limit->offset +
- priv->output_limit->data));
-
- p54_update_channel_param(list, freq, CHAN_HAS_LIMIT);
+ struct p54_channel_entry *tmp;
+
+ void *data = (void *) ((unsigned long) i *
+ priv->output_limit->entry_size +
+ priv->output_limit->offset +
+ priv->output_limit->data);
+
+ freq = le16_to_cpup((__le16 *) data);
+ tmp = p54_update_channel_param(list, freq,
+ CHAN_HAS_LIMIT);
+ if (tmp) {
+ tmp->max_power = p54_get_maxpower(priv, data);
+ }
}
if (i < priv->curve_data->entries) {
@@ -290,12 +391,13 @@ static int p54_generate_channel_lists(struct ieee80211_hw *dev)
}
}
- /* sort the list by the channel index */
+ /* sort the channel list by frequency */
sort(list->channels, list->entries, sizeof(struct p54_channel_entry),
p54_compare_channels, NULL);
+ k = 0;
for (i = 0, j = 0; i < IEEE80211_NUM_BANDS; i++) {
- if (p54_generate_band(dev, list, i) == 0)
+ if (p54_generate_band(dev, list, &k, i) == 0)
j++;
}
if (j == 0) {
@@ -308,6 +410,10 @@ free:
kfree(list->channels);
kfree(list);
}
+ if (ret) {
+ kfree(priv->survey);
+ priv->survey = NULL;
+ }
return ret;
}
@@ -409,34 +515,122 @@ static int p54_convert_rev1(struct ieee80211_hw *dev,
static const char *p54_rf_chips[] = { "INVALID-0", "Duette3", "Duette2",
"Frisbee", "Xbow", "Longbow", "INVALID-6", "INVALID-7" };
-static void p54_parse_rssical(struct ieee80211_hw *dev, void *data, int len,
- u16 type)
+static int p54_parse_rssical(struct ieee80211_hw *dev,
+ u8 *data, int len, u16 type)
{
struct p54_common *priv = dev->priv;
- int offset = (type == PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) ? 2 : 0;
- int entry_size = sizeof(struct pda_rssi_cal_entry) + offset;
- int num_entries = (type == PDR_RSSI_LINEAR_APPROXIMATION) ? 1 : 2;
- int i;
+ struct p54_rssi_db_entry *entry;
+ size_t db_len, entries;
+ int offset = 0, i;
+
+ if (type != PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) {
+ entries = (type == PDR_RSSI_LINEAR_APPROXIMATION) ? 1 : 2;
+ if (len != sizeof(struct pda_rssi_cal_entry) * entries) {
+ wiphy_err(dev->wiphy, "rssical size mismatch.\n");
+ goto err_data;
+ }
+ } else {
+ /*
+ * Some devices (Dell 1450 USB, Xbow 5GHz card, etc...)
+ * have an empty two byte header.
+ */
+ if (*((__le16 *)&data[offset]) == cpu_to_le16(0))
+ offset += 2;
- if (len != (entry_size * num_entries)) {
- printk(KERN_ERR "%s: unknown rssi calibration data packing "
- " type:(%x) len:%d.\n",
- wiphy_name(dev->wiphy), type, len);
+ entries = (len - offset) /
+ sizeof(struct pda_rssi_cal_ext_entry);
- print_hex_dump_bytes("rssical:", DUMP_PREFIX_NONE,
- data, len);
+ if (len < offset ||
+ (len - offset) % sizeof(struct pda_rssi_cal_ext_entry) ||
+ entries == 0) {
+ wiphy_err(dev->wiphy, "invalid rssi database.\n");
+ goto err_data;
+ }
+ }
- printk(KERN_ERR "%s: please report this issue.\n",
- wiphy_name(dev->wiphy));
- return;
+ db_len = sizeof(*entry) * entries;
+ priv->rssi_db = kzalloc(db_len + sizeof(*priv->rssi_db), GFP_KERNEL);
+ if (!priv->rssi_db)
+ return -ENOMEM;
+
+ priv->rssi_db->offset = 0;
+ priv->rssi_db->entries = entries;
+ priv->rssi_db->entry_size = sizeof(*entry);
+ priv->rssi_db->len = db_len;
+
+ entry = (void *)((unsigned long)priv->rssi_db->data + priv->rssi_db->offset);
+ if (type == PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) {
+ struct pda_rssi_cal_ext_entry *cal = (void *) &data[offset];
+
+ for (i = 0; i < entries; i++) {
+ entry[i].freq = le16_to_cpu(cal[i].freq);
+ entry[i].mul = (s16) le16_to_cpu(cal[i].mul);
+ entry[i].add = (s16) le16_to_cpu(cal[i].add);
+ }
+ } else {
+ struct pda_rssi_cal_entry *cal = (void *) &data[offset];
+
+ for (i = 0; i < entries; i++) {
+ u16 freq = 0;
+ switch (i) {
+ case IEEE80211_BAND_2GHZ:
+ freq = 2437;
+ break;
+ case IEEE80211_BAND_5GHZ:
+ freq = 5240;
+ break;
+ }
+
+ entry[i].freq = freq;
+ entry[i].mul = (s16) le16_to_cpu(cal[i].mul);
+ entry[i].add = (s16) le16_to_cpu(cal[i].add);
+ }
}
- for (i = 0; i < num_entries; i++) {
- struct pda_rssi_cal_entry *cal = data +
- (offset + i * entry_size);
- priv->rssical_db[i].mul = (s16) le16_to_cpu(cal->mul);
- priv->rssical_db[i].add = (s16) le16_to_cpu(cal->add);
+ /* sort the list by channel frequency */
+ sort(entry, entries, sizeof(*entry), p54_compare_rssichan, NULL);
+ return 0;
+
+err_data:
+ wiphy_err(dev->wiphy,
+ "rssi calibration data packing type:(%x) len:%d.\n",
+ type, len);
+
+ print_hex_dump_bytes("rssical:", DUMP_PREFIX_NONE, data, len);
+
+ wiphy_err(dev->wiphy, "please report this issue.\n");
+ return -EINVAL;
+}
+
+struct p54_rssi_db_entry *p54_rssi_find(struct p54_common *priv, const u16 freq)
+{
+ struct p54_rssi_db_entry *entry;
+ int i, found = -1;
+
+ if (!priv->rssi_db)
+ return &p54_rssi_default;
+
+ entry = (void *)(priv->rssi_db->data + priv->rssi_db->offset);
+ for (i = 0; i < priv->rssi_db->entries; i++) {
+ if (!same_band(freq, entry[i].freq))
+ continue;
+
+ if (found == -1) {
+ found = i;
+ continue;
+ }
+
+ /* nearest match */
+ if (abs(freq - entry[i].freq) <
+ abs(freq - entry[found].freq)) {
+ found = i;
+ continue;
+ } else {
+ break;
+ }
}
+
+ return found < 0 ? &p54_rssi_default : &entry[found];
}
static void p54_parse_default_country(struct ieee80211_hw *dev,
@@ -445,15 +639,14 @@ static void p54_parse_default_country(struct ieee80211_hw *dev,
struct pda_country *country;
if (len != sizeof(*country)) {
- printk(KERN_ERR "%s: found possible invalid default country "
- "eeprom entry. (entry size: %d)\n",
- wiphy_name(dev->wiphy), len);
+ wiphy_err(dev->wiphy,
+ "found possible invalid default country eeprom entry. (entry size: %d)\n",
+ len);
print_hex_dump_bytes("country:", DUMP_PREFIX_NONE,
data, len);
- printk(KERN_ERR "%s: please report this issue.\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "please report this issue.\n");
return;
}
@@ -478,8 +671,8 @@ static int p54_convert_output_limits(struct ieee80211_hw *dev,
return -EINVAL;
if (data[0] != 0) {
- printk(KERN_ERR "%s: unknown output power db revision:%x\n",
- wiphy_name(dev->wiphy), data[0]);
+ wiphy_err(dev->wiphy, "unknown output power db revision:%x\n",
+ data[0]);
return -EINVAL;
}
@@ -544,6 +737,7 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
int err;
u8 *end = (u8 *)eeprom + len;
u16 synth = 0;
+ u16 crc16 = ~0;
wrap = (struct eeprom_pda_wrap *) eeprom;
entry = (void *)wrap->data + le16_to_cpu(wrap->len);
@@ -587,10 +781,9 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
err = p54_convert_rev1(dev, curve_data);
break;
default:
- printk(KERN_ERR "%s: unknown curve data "
- "revision %d\n",
- wiphy_name(dev->wiphy),
- curve_data->cal_method_rev);
+ wiphy_err(dev->wiphy,
+ "unknown curve data revision %d\n",
+ curve_data->cal_method_rev);
err = -ENODEV;
break;
}
@@ -599,13 +792,13 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
}
break;
case PDR_PRISM_ZIF_TX_IQ_CALIBRATION:
- priv->iq_autocal = kmalloc(data_len, GFP_KERNEL);
+ priv->iq_autocal = kmemdup(entry->data, data_len,
+ GFP_KERNEL);
if (!priv->iq_autocal) {
err = -ENOMEM;
goto err;
}
- memcpy(priv->iq_autocal, entry->data, data_len);
priv->iq_autocal_len = data_len / sizeof(struct pda_iq_autocal_entry);
break;
case PDR_DEFAULT_COUNTRY:
@@ -628,21 +821,30 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
case PDR_RSSI_LINEAR_APPROXIMATION:
case PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND:
case PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED:
- p54_parse_rssical(dev, entry->data, data_len,
- le16_to_cpu(entry->code));
+ err = p54_parse_rssical(dev, entry->data, data_len,
+ le16_to_cpu(entry->code));
+ if (err)
+ goto err;
break;
- case PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM: {
- __le16 *src = (void *) entry->data;
- s16 *dst = (void *) &priv->rssical_db;
+ case PDR_RSSI_LINEAR_APPROXIMATION_CUSTOMV2: {
+ struct pda_custom_wrapper *pda = (void *) entry->data;
+ __le16 *src;
+ u16 *dst;
int i;
- if (data_len != sizeof(priv->rssical_db)) {
- err = -EINVAL;
- goto err;
- }
- for (i = 0; i < sizeof(priv->rssical_db) /
- sizeof(*src); i++)
+ if (priv->rssi_db || data_len < sizeof(*pda))
+ break;
+
+ priv->rssi_db = p54_convert_db(pda, data_len);
+ if (!priv->rssi_db)
+ break;
+
+ src = (void *) priv->rssi_db->data;
+ dst = (void *) priv->rssi_db->data;
+
+ for (i = 0; i < priv->rssi_db->entries; i++)
*(dst++) = (s16) le16_to_cpu(*(src++));
+
}
break;
case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM: {
@@ -660,29 +862,43 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
}
break;
case PDR_END:
- /* make it overrun */
- entry_len = len;
+ crc16 = ~crc_ccitt(crc16, (u8 *) entry, sizeof(*entry));
+ if (crc16 != le16_to_cpup((__le16 *)entry->data)) {
+ wiphy_err(dev->wiphy, "eeprom failed checksum "
+ "test!\n");
+ err = -ENOMSG;
+ goto err;
+ } else {
+ goto good_eeprom;
+ }
break;
default:
break;
}
- entry = (void *)entry + (entry_len + 1)*2;
+ crc16 = crc_ccitt(crc16, (u8 *)entry, (entry_len + 1) * 2);
+ entry = (void *)entry + (entry_len + 1) * 2;
}
+ wiphy_err(dev->wiphy, "unexpected end of eeprom data.\n");
+ err = -ENODATA;
+ goto err;
+
+good_eeprom:
if (!synth || !priv->iq_autocal || !priv->output_limit ||
!priv->curve_data) {
- printk(KERN_ERR "%s: not all required entries found in eeprom!\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy,
+ "not all required entries found in eeprom!\n");
err = -EINVAL;
goto err;
}
+ priv->rxhw = synth & PDR_SYNTH_FRONTEND_MASK;
+
err = p54_generate_channel_lists(dev);
if (err)
goto err;
- priv->rxhw = synth & PDR_SYNTH_FRONTEND_MASK;
if (priv->rxhw == PDR_SYNTH_FRONTEND_XBOW)
p54_init_xbow_synth(priv);
if (!(synth & PDR_SYNTH_24_GHZ_DISABLED))
@@ -699,15 +915,17 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
u8 perm_addr[ETH_ALEN];
- printk(KERN_WARNING "%s: Invalid hwaddr! Using randomly generated MAC addr\n",
- wiphy_name(dev->wiphy));
- random_ether_addr(perm_addr);
+ wiphy_warn(dev->wiphy,
+ "Invalid hwaddr! Using randomly generated MAC addr\n");
+ eth_random_addr(perm_addr);
SET_IEEE80211_PERM_ADDR(dev, perm_addr);
}
- printk(KERN_INFO "%s: hwaddr %pM, MAC:isl38%02x RF:%s\n",
- wiphy_name(dev->wiphy), dev->wiphy->perm_addr, priv->version,
- p54_rf_chips[priv->rxhw]);
+ priv->cur_rssi = &p54_rssi_default;
+
+ wiphy_info(dev->wiphy, "hwaddr %pM, MAC:isl38%02x RF:%s\n",
+ dev->wiphy->perm_addr, priv->version,
+ p54_rf_chips[priv->rxhw]);
return 0;
@@ -715,12 +933,15 @@ err:
kfree(priv->iq_autocal);
kfree(priv->output_limit);
kfree(priv->curve_data);
+ kfree(priv->rssi_db);
+ kfree(priv->survey);
priv->iq_autocal = NULL;
priv->output_limit = NULL;
priv->curve_data = NULL;
+ priv->rssi_db = NULL;
+ priv->survey = NULL;
- printk(KERN_ERR "%s: eeprom parse failed!\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "eeprom parse failed!\n");
return err;
}
EXPORT_SYMBOL_GPL(p54_parse_eeprom);
@@ -744,7 +965,7 @@ int p54_read_eeprom(struct ieee80211_hw *dev)
while (eeprom_size) {
blocksize = min(eeprom_size, maxblocksize);
- ret = p54_download_eeprom(priv, (void *) (eeprom + offset),
+ ret = p54_download_eeprom(priv, eeprom + offset,
offset, blocksize);
if (unlikely(ret))
goto free;
diff --git a/drivers/net/wireless/p54/eeprom.h b/drivers/net/wireless/p54/eeprom.h
index 9051aef1124..20ebe39a3f4 100644
--- a/drivers/net/wireless/p54/eeprom.h
+++ b/drivers/net/wireless/p54/eeprom.h
@@ -57,6 +57,18 @@ struct pda_channel_output_limit {
u8 rate_set_size;
} __packed;
+struct pda_channel_output_limit_point_longbow {
+ __le16 val_bpsk;
+ __le16 val_qpsk;
+ __le16 val_16qam;
+ __le16 val_64qam;
+} __packed;
+
+struct pda_channel_output_limit_longbow {
+ __le16 freq;
+ struct pda_channel_output_limit_point_longbow point[3];
+} __packed;
+
struct pda_pa_curve_data_sample_rev0 {
u8 rf_power;
u8 pa_detector;
@@ -81,6 +93,12 @@ struct pda_pa_curve_data {
u8 data[0];
} __packed;
+struct pda_rssi_cal_ext_entry {
+ __le16 freq;
+ __le16 mul;
+ __le16 add;
+} __packed;
+
struct pda_rssi_cal_entry {
__le16 mul;
__le16 add;
@@ -179,6 +197,7 @@ struct pda_custom_wrapper {
/* used by our modificated eeprom image */
#define PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM 0xDEAD
+#define PDR_RSSI_LINEAR_APPROXIMATION_CUSTOMV2 0xCAFF
#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM 0xBEEF
#define PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM 0xB05D
diff --git a/drivers/net/wireless/p54/fwio.c b/drivers/net/wireless/p54/fwio.c
index c43a5d461ab..bc065e8e348 100644
--- a/drivers/net/wireless/p54/fwio.c
+++ b/drivers/net/wireless/p54/fwio.c
@@ -16,10 +16,10 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
+#include <linux/export.h>
#include <net/mac80211.h>
@@ -62,16 +62,15 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
case FW_LM20:
case FW_LM87: {
char *iftype = (char *)bootrec->data;
- printk(KERN_INFO "%s: p54 detected a LM%c%c "
- "firmware\n",
- wiphy_name(priv->hw->wiphy),
- iftype[2], iftype[3]);
+ wiphy_info(priv->hw->wiphy,
+ "p54 detected a LM%c%c firmware\n",
+ iftype[2], iftype[3]);
break;
}
case FW_FMAC:
default:
- printk(KERN_ERR "%s: unsupported firmware\n",
- wiphy_name(priv->hw->wiphy));
+ wiphy_err(priv->hw->wiphy,
+ "unsupported firmware\n");
return -ENODEV;
}
break;
@@ -124,16 +123,20 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
bootrec = (struct bootrec *)&bootrec->data[len];
}
- if (fw_version)
- printk(KERN_INFO "%s: FW rev %s - Softmac protocol %x.%x\n",
- wiphy_name(priv->hw->wiphy), fw_version,
- priv->fw_var >> 8, priv->fw_var & 0xff);
+ if (fw_version) {
+ wiphy_info(priv->hw->wiphy,
+ "FW rev %s - Softmac protocol %x.%x\n",
+ fw_version, priv->fw_var >> 8, priv->fw_var & 0xff);
+ snprintf(dev->wiphy->fw_version, sizeof(dev->wiphy->fw_version),
+ "%s - %x.%x", fw_version,
+ priv->fw_var >> 8, priv->fw_var & 0xff);
+ }
if (priv->fw_var < 0x500)
- printk(KERN_INFO "%s: you are using an obsolete firmware. "
- "visit http://wireless.kernel.org/en/users/Drivers/p54 "
- "and grab one for \"kernel >= 2.6.28\"!\n",
- wiphy_name(priv->hw->wiphy));
+ wiphy_info(priv->hw->wiphy,
+ "you are using an obsolete firmware. "
+ "visit http://wireless.kernel.org/en/users/Drivers/p54 "
+ "and grab one for \"kernel >= 2.6.28\"!\n");
if (priv->fw_var >= 0x300) {
/* Firmware supports QoS, use it! */
@@ -152,13 +155,14 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
priv->hw->queues = P54_QUEUE_AC_NUM;
}
- printk(KERN_INFO "%s: cryptographic accelerator "
- "WEP:%s, TKIP:%s, CCMP:%s\n", wiphy_name(priv->hw->wiphy),
- (priv->privacy_caps & BR_DESC_PRIV_CAP_WEP) ? "YES" :
- "no", (priv->privacy_caps & (BR_DESC_PRIV_CAP_TKIP |
- BR_DESC_PRIV_CAP_MICHAEL)) ? "YES" : "no",
- (priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP) ?
- "YES" : "no");
+ wiphy_info(priv->hw->wiphy,
+ "cryptographic accelerator WEP:%s, TKIP:%s, CCMP:%s\n",
+ (priv->privacy_caps & BR_DESC_PRIV_CAP_WEP) ? "YES" : "no",
+ (priv->privacy_caps &
+ (BR_DESC_PRIV_CAP_TKIP | BR_DESC_PRIV_CAP_MICHAEL))
+ ? "YES" : "no",
+ (priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP)
+ ? "YES" : "no");
if (priv->rx_keycache_size) {
/*
@@ -247,8 +251,7 @@ int p54_download_eeprom(struct p54_common *priv, void *buf,
if (!wait_for_completion_interruptible_timeout(
&priv->eeprom_comp, HZ)) {
- printk(KERN_ERR "%s: device does not respond!\n",
- wiphy_name(priv->hw->wiphy));
+ wiphy_err(priv->hw->wiphy, "device does not respond!\n");
ret = -EBUSY;
}
priv->eeprom = NULL;
@@ -382,6 +385,7 @@ int p54_setup_mac(struct p54_common *priv)
setup->v2.osc_start_delay = cpu_to_le16(65535);
}
p54_tx(priv, skb);
+ priv->phy_idle = mode == P54_FILTER_TYPE_HIBERNATE;
return 0;
}
@@ -394,10 +398,10 @@ int p54_scan(struct p54_common *priv, u16 mode, u16 dwell)
union p54_scan_body_union *body;
struct p54_scan_tail_rate *rate;
struct pda_rssi_cal_entry *rssi;
+ struct p54_rssi_db_entry *rssi_data;
unsigned int i;
void *entry;
- int band = priv->hw->conf.channel->band;
- __le16 freq = cpu_to_le16(priv->hw->conf.channel->center_freq);
+ __le16 freq = cpu_to_le16(priv->hw->conf.chandef.chan->center_freq);
skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*head) +
2 + sizeof(*iq_autocal) + sizeof(*body) +
@@ -473,7 +477,7 @@ int p54_scan(struct p54_common *priv, u16 mode, u16 dwell)
if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) {
memcpy(&body->longbow.curve_data,
- (void *) entry + sizeof(__le16),
+ entry + sizeof(__le16),
priv->curve_data->entry_size);
} else {
struct p54_scan_body *chan = &body->normal;
@@ -500,13 +504,14 @@ int p54_scan(struct p54_common *priv, u16 mode, u16 dwell)
}
rssi = (struct pda_rssi_cal_entry *) skb_put(skb, sizeof(*rssi));
- rssi->mul = cpu_to_le16(priv->rssical_db[band].mul);
- rssi->add = cpu_to_le16(priv->rssical_db[band].add);
+ rssi_data = p54_rssi_find(priv, le16_to_cpu(freq));
+ rssi->mul = cpu_to_le16(rssi_data->mul);
+ rssi->add = cpu_to_le16(rssi_data->add);
if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) {
/* Longbow frontend needs ever more */
rssi = (void *) skb_put(skb, sizeof(*rssi));
- rssi->mul = cpu_to_le16(priv->rssical_db[band].longbow_unkn);
- rssi->add = cpu_to_le16(priv->rssical_db[band].longbow_unk2);
+ rssi->mul = cpu_to_le16(rssi_data->longbow_unkn);
+ rssi->add = cpu_to_le16(rssi_data->longbow_unk2);
}
if (priv->fw_var >= 0x509) {
@@ -520,12 +525,13 @@ int p54_scan(struct p54_common *priv, u16 mode, u16 dwell)
hdr->len = cpu_to_le16(skb->len - sizeof(*hdr));
p54_tx(priv, skb);
+ priv->cur_rssi = rssi_data;
return 0;
err:
- printk(KERN_ERR "%s: frequency change to channel %d failed.\n",
- wiphy_name(priv->hw->wiphy), ieee80211_frequency_to_channel(
- priv->hw->conf.channel->center_freq));
+ wiphy_err(priv->hw->wiphy, "frequency change to channel %d failed.\n",
+ ieee80211_frequency_to_channel(
+ priv->hw->conf.chandef.chan->center_freq));
dev_kfree_skb_any(skb);
return -EINVAL;
@@ -554,6 +560,7 @@ int p54_set_edcf(struct p54_common *priv)
{
struct sk_buff *skb;
struct p54_edcf *edcf;
+ u8 rtd;
skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*edcf),
P54_CONTROL_TYPE_DCFINIT, GFP_ATOMIC);
@@ -570,9 +577,15 @@ int p54_set_edcf(struct p54_common *priv)
edcf->sifs = 0x0a;
edcf->eofpad = 0x06;
}
+ /*
+ * calculate the extra round trip delay according to the
+ * formula from 802.11-2007 17.3.8.6.
+ */
+ rtd = 3 * priv->coverage_class;
+ edcf->slottime += rtd;
+ edcf->round_trip_delay = cpu_to_le16(rtd);
/* (see prism54/isl_oid.h for further details) */
edcf->frameburst = cpu_to_le16(0);
- edcf->round_trip_delay = cpu_to_le16(0);
edcf->flags = 0;
memset(edcf->mapping, 0, sizeof(edcf->mapping));
memcpy(edcf->queue, priv->qos_params, sizeof(edcf->queue));
@@ -614,6 +627,7 @@ int p54_set_ps(struct p54_common *priv)
psm->exclude[0] = WLAN_EID_TIM;
p54_tx(priv, skb);
+ priv->phy_ps = mode != P54_PSM_CAM;
return 0;
}
@@ -676,8 +690,8 @@ int p54_upload_key(struct p54_common *priv, u8 algo, int slot, u8 idx, u8 len,
break;
default:
- printk(KERN_ERR "%s: invalid cryptographic algorithm: %d\n",
- wiphy_name(priv->hw->wiphy), algo);
+ wiphy_err(priv->hw->wiphy,
+ "invalid cryptographic algorithm: %d\n", algo);
dev_kfree_skb(skb);
return -EINVAL;
}
@@ -715,3 +729,34 @@ int p54_fetch_statistics(struct p54_common *priv)
p54_tx(priv, skb);
return 0;
}
+
+int p54_set_groupfilter(struct p54_common *priv)
+{
+ struct p54_group_address_table *grp;
+ struct sk_buff *skb;
+ bool on = false;
+
+ skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*grp),
+ P54_CONTROL_TYPE_GROUP_ADDRESS_TABLE, GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
+
+ grp = (struct p54_group_address_table *)skb_put(skb, sizeof(*grp));
+
+ on = !(priv->filter_flags & FIF_ALLMULTI) &&
+ (priv->mc_maclist_num > 0 &&
+ priv->mc_maclist_num <= MC_FILTER_ADDRESS_NUM);
+
+ if (on) {
+ grp->filter_enable = cpu_to_le16(1);
+ grp->num_address = cpu_to_le16(priv->mc_maclist_num);
+ memcpy(grp->mac_list, priv->mc_maclist, sizeof(grp->mac_list));
+ } else {
+ grp->filter_enable = cpu_to_le16(0);
+ grp->num_address = cpu_to_le16(0);
+ memset(grp->mac_list, 0, sizeof(grp->mac_list));
+ }
+
+ p54_tx(priv, skb);
+ return 0;
+}
diff --git a/drivers/net/wireless/p54/led.c b/drivers/net/wireless/p54/led.c
index 9575ac03363..1f6fd5ff553 100644
--- a/drivers/net/wireless/p54/led.c
+++ b/drivers/net/wireless/p54/led.c
@@ -16,7 +16,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
@@ -57,8 +56,8 @@ static void p54_update_leds(struct work_struct *work)
err = p54_set_leds(priv);
if (err && net_ratelimit())
- printk(KERN_ERR "%s: failed to update LEDs (%d).\n",
- wiphy_name(priv->hw->wiphy), err);
+ wiphy_err(priv->hw->wiphy,
+ "failed to update LEDs (%d).\n", err);
if (rerun)
ieee80211_queue_delayed_work(priv->hw, &priv->led_work,
@@ -102,8 +101,8 @@ static int p54_register_led(struct p54_common *priv,
err = led_classdev_register(wiphy_dev(priv->hw->wiphy), &led->led_dev);
if (err)
- printk(KERN_ERR "%s: Failed to register %s LED.\n",
- wiphy_name(priv->hw->wiphy), name);
+ wiphy_err(priv->hw->wiphy,
+ "Failed to register %s LED.\n", name);
else
led->registered = 1;
diff --git a/drivers/net/wireless/p54/lmac.h b/drivers/net/wireless/p54/lmac.h
index 04b63ec80fa..de1d46bf97d 100644
--- a/drivers/net/wireless/p54/lmac.h
+++ b/drivers/net/wireless/p54/lmac.h
@@ -526,7 +526,9 @@ int p54_init_leds(struct p54_common *priv);
void p54_unregister_leds(struct p54_common *priv);
/* xmit functions */
-int p54_tx_80211(struct ieee80211_hw *dev, struct sk_buff *skb);
+void p54_tx_80211(struct ieee80211_hw *dev,
+ struct ieee80211_tx_control *control,
+ struct sk_buff *skb);
int p54_tx_cancel(struct p54_common *priv, __le32 req_id);
void p54_tx(struct p54_common *priv, struct sk_buff *skb);
@@ -540,6 +542,7 @@ int p54_update_beacon_tim(struct p54_common *priv, u16 aid, bool set);
int p54_setup_mac(struct p54_common *priv);
int p54_set_ps(struct p54_common *priv);
int p54_fetch_statistics(struct p54_common *priv);
+int p54_set_groupfilter(struct p54_common *priv);
/* e/v DCF setup */
int p54_set_edcf(struct p54_common *priv);
@@ -551,6 +554,7 @@ int p54_upload_key(struct p54_common *priv, u8 algo, int slot,
/* eeprom */
int p54_download_eeprom(struct p54_common *priv, void *buf,
u16 offset, u16 len);
+struct p54_rssi_db_entry *p54_rssi_find(struct p54_common *p, const u16 freq);
/* utility */
u8 *p54_find_ie(struct sk_buff *skb, u8 ie);
diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c
index c072f41747c..7be3a483964 100644
--- a/drivers/net/wireless/p54/main.c
+++ b/drivers/net/wireless/p54/main.c
@@ -16,17 +16,17 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
+#include <linux/module.h>
#include <net/mac80211.h>
#include "p54.h"
#include "lmac.h"
-static int modparam_nohwcrypt;
+static bool modparam_nohwcrypt;
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
@@ -138,6 +138,7 @@ static int p54_beacon_format_ie_tim(struct sk_buff *skb)
static int p54_beacon_update(struct p54_common *priv,
struct ieee80211_vif *vif)
{
+ struct ieee80211_tx_control control = { };
struct sk_buff *beacon;
int ret;
@@ -157,7 +158,7 @@ static int p54_beacon_update(struct p54_common *priv,
* to cancel the old beacon template by hand, instead the firmware
* will release the previous one through the feedback mechanism.
*/
- WARN_ON(p54_tx_80211(priv->hw, beacon));
+ p54_tx_80211(priv->hw, &control, beacon);
priv->tsf_high32 = 0;
priv->tsf_low32 = 0;
@@ -204,13 +205,11 @@ static void p54_stop(struct ieee80211_hw *dev)
struct p54_common *priv = dev->priv;
int i;
- mutex_lock(&priv->conf_mutex);
priv->mode = NL80211_IFTYPE_UNSPECIFIED;
priv->softled_state = 0;
- p54_set_leds(priv);
-
cancel_delayed_work_sync(&priv->work);
-
+ mutex_lock(&priv->conf_mutex);
+ p54_set_leds(priv);
priv->stop(dev);
skb_queue_purge(&priv->tx_pending);
skb_queue_purge(&priv->tx_queue);
@@ -228,6 +227,9 @@ static int p54_add_interface(struct ieee80211_hw *dev,
struct ieee80211_vif *vif)
{
struct p54_common *priv = dev->priv;
+ int err;
+
+ vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER;
mutex_lock(&priv->conf_mutex);
if (priv->mode != NL80211_IFTYPE_MONITOR) {
@@ -250,9 +252,9 @@ static int p54_add_interface(struct ieee80211_hw *dev,
}
memcpy(priv->mac_addr, vif->addr, ETH_ALEN);
- p54_setup_mac(priv);
+ err = p54_setup_mac(priv);
mutex_unlock(&priv->conf_mutex);
- return 0;
+ return err;
}
static void p54_remove_interface(struct ieee80211_hw *dev,
@@ -278,6 +280,42 @@ static void p54_remove_interface(struct ieee80211_hw *dev,
mutex_unlock(&priv->conf_mutex);
}
+static int p54_wait_for_stats(struct ieee80211_hw *dev)
+{
+ struct p54_common *priv = dev->priv;
+ int ret;
+
+ priv->update_stats = true;
+ ret = p54_fetch_statistics(priv);
+ if (ret)
+ return ret;
+
+ ret = wait_for_completion_interruptible_timeout(&priv->stat_comp, HZ);
+ if (ret == 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static void p54_reset_stats(struct p54_common *priv)
+{
+ struct ieee80211_channel *chan = priv->curchan;
+
+ if (chan) {
+ struct survey_info *info = &priv->survey[chan->hw_value];
+
+ /* only reset channel statistics, don't touch .filled, etc. */
+ info->channel_time = 0;
+ info->channel_time_busy = 0;
+ info->channel_time_tx = 0;
+ }
+
+ priv->update_stats = true;
+ priv->survey_raw.active = 0;
+ priv->survey_raw.cca = 0;
+ priv->survey_raw.tx = 0;
+}
+
static int p54_config(struct ieee80211_hw *dev, u32 changed)
{
int ret = 0;
@@ -288,19 +326,36 @@ static int p54_config(struct ieee80211_hw *dev, u32 changed)
if (changed & IEEE80211_CONF_CHANGE_POWER)
priv->output_power = conf->power_level << 2;
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+ struct ieee80211_channel *oldchan;
+ WARN_ON(p54_wait_for_stats(dev));
+ oldchan = priv->curchan;
+ priv->curchan = NULL;
ret = p54_scan(priv, P54_SCAN_EXIT, 0);
- if (ret)
+ if (ret) {
+ priv->curchan = oldchan;
goto out;
+ }
+ /*
+ * TODO: Use the LM_SCAN_TRAP to determine the current
+ * operating channel.
+ */
+ priv->curchan = priv->hw->conf.chandef.chan;
+ p54_reset_stats(priv);
+ WARN_ON(p54_fetch_statistics(priv));
}
if (changed & IEEE80211_CONF_CHANGE_PS) {
+ WARN_ON(p54_wait_for_stats(dev));
ret = p54_set_ps(priv);
if (ret)
goto out;
+ WARN_ON(p54_wait_for_stats(dev));
}
if (changed & IEEE80211_CONF_CHANGE_IDLE) {
+ WARN_ON(p54_wait_for_stats(dev));
ret = p54_setup_mac(priv);
if (ret)
goto out;
+ WARN_ON(p54_wait_for_stats(dev));
}
out:
@@ -308,6 +363,31 @@ out:
return ret;
}
+static u64 p54_prepare_multicast(struct ieee80211_hw *dev,
+ struct netdev_hw_addr_list *mc_list)
+{
+ struct p54_common *priv = dev->priv;
+ struct netdev_hw_addr *ha;
+ int i;
+
+ BUILD_BUG_ON(ARRAY_SIZE(priv->mc_maclist) !=
+ ARRAY_SIZE(((struct p54_group_address_table *)NULL)->mac_list));
+ /*
+ * The first entry is reserved for the global broadcast MAC.
+ * Otherwise the firmware will drop it and ARP will no longer work.
+ */
+ i = 1;
+ priv->mc_maclist_num = netdev_hw_addr_list_count(mc_list) + i;
+ netdev_hw_addr_list_for_each(ha, mc_list) {
+ memcpy(&priv->mc_maclist[i], ha->addr, ETH_ALEN);
+ i++;
+ if (i >= ARRAY_SIZE(priv->mc_maclist))
+ break;
+ }
+
+ return 1; /* update */
+}
+
static void p54_configure_filter(struct ieee80211_hw *dev,
unsigned int changed_flags,
unsigned int *total_flags,
@@ -316,15 +396,20 @@ static void p54_configure_filter(struct ieee80211_hw *dev,
struct p54_common *priv = dev->priv;
*total_flags &= FIF_PROMISC_IN_BSS |
+ FIF_ALLMULTI |
FIF_OTHER_BSS;
priv->filter_flags = *total_flags;
if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS))
p54_setup_mac(priv);
+
+ if (changed_flags & FIF_ALLMULTI || multicast)
+ p54_set_groupfilter(priv);
}
-static int p54_conf_tx(struct ieee80211_hw *dev, u16 queue,
+static int p54_conf_tx(struct ieee80211_hw *dev,
+ struct ieee80211_vif *vif, u16 queue,
const struct ieee80211_tx_queue_params *params)
{
struct p54_common *priv = dev->priv;
@@ -355,7 +440,9 @@ static void p54_work(struct work_struct *work)
* 2. cancel stuck frames / reset the device if necessary.
*/
- p54_fetch_statistics(priv);
+ mutex_lock(&priv->conf_mutex);
+ WARN_ON_ONCE(p54_fetch_statistics(priv));
+ mutex_unlock(&priv->conf_mutex);
}
static int p54_get_stats(struct ieee80211_hw *dev,
@@ -392,7 +479,7 @@ static void p54_bss_info_changed(struct ieee80211_hw *dev,
p54_set_edcf(priv);
}
if (changed & BSS_CHANGED_BASIC_RATES) {
- if (dev->conf.channel->band == IEEE80211_BAND_5GHZ)
+ if (dev->conf.chandef.chan->band == IEEE80211_BAND_5GHZ)
priv->basic_rate_mask = (info->basic_rates << 4);
else
priv->basic_rate_mask = info->basic_rates;
@@ -427,10 +514,21 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
if (modparam_nohwcrypt)
return -EOPNOTSUPP;
+ if (key->flags & IEEE80211_KEY_FLAG_RX_MGMT) {
+ /*
+ * Unfortunately most/all firmwares are trying to decrypt
+ * incoming management frames if a suitable key can be found.
+ * However, in doing so the data in these frames gets
+ * corrupted. So, we can't have firmware supported crypto
+ * offload in this case.
+ */
+ return -EOPNOTSUPP;
+ }
+
mutex_lock(&priv->conf_mutex);
if (cmd == SET_KEY) {
- switch (key->alg) {
- case ALG_TKIP:
+ switch (key->cipher) {
+ case WLAN_CIPHER_SUITE_TKIP:
if (!(priv->privacy_caps & (BR_DESC_PRIV_CAP_MICHAEL |
BR_DESC_PRIV_CAP_TKIP))) {
ret = -EOPNOTSUPP;
@@ -439,7 +537,8 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
algo = P54_CRYPTO_TKIPMICHAEL;
break;
- case ALG_WEP:
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_WEP)) {
ret = -EOPNOTSUPP;
goto out_unlock;
@@ -447,7 +546,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
algo = P54_CRYPTO_WEP;
break;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP)) {
ret = -EOPNOTSUPP;
goto out_unlock;
@@ -464,7 +563,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
if (slot < 0) {
/*
- * The device supports the choosen algorithm, but the
+ * The device supports the chosen algorithm, but the
* firmware does not provide enough key slots to store
* all of them.
* But encryption offload for outgoing frames is always
@@ -507,6 +606,107 @@ out_unlock:
return ret;
}
+static int p54_get_survey(struct ieee80211_hw *dev, int idx,
+ struct survey_info *survey)
+{
+ struct p54_common *priv = dev->priv;
+ struct ieee80211_channel *chan;
+ int err, tries;
+ bool in_use = false;
+
+ if (idx >= priv->chan_num)
+ return -ENOENT;
+
+#define MAX_TRIES 1
+ for (tries = 0; tries < MAX_TRIES; tries++) {
+ chan = priv->curchan;
+ if (chan && chan->hw_value == idx) {
+ mutex_lock(&priv->conf_mutex);
+ err = p54_wait_for_stats(dev);
+ mutex_unlock(&priv->conf_mutex);
+ if (err)
+ return err;
+
+ in_use = true;
+ }
+
+ memcpy(survey, &priv->survey[idx], sizeof(*survey));
+
+ if (in_use) {
+ /* test if the reported statistics are valid. */
+ if (survey->channel_time != 0) {
+ survey->filled |= SURVEY_INFO_IN_USE;
+ } else {
+ /*
+ * hw/fw has not accumulated enough sample sets.
+ * Wait for 100ms, this ought to be enough to
+ * to get at least one non-null set of channel
+ * usage statistics.
+ */
+ msleep(100);
+ continue;
+ }
+ }
+ return 0;
+ }
+ return -ETIMEDOUT;
+#undef MAX_TRIES
+}
+
+static unsigned int p54_flush_count(struct p54_common *priv)
+{
+ unsigned int total = 0, i;
+
+ BUILD_BUG_ON(P54_QUEUE_NUM > ARRAY_SIZE(priv->tx_stats));
+
+ /*
+ * Because the firmware has the sole control over any frames
+ * in the P54_QUEUE_BEACON or P54_QUEUE_SCAN queues, they
+ * don't really count as pending or active.
+ */
+ for (i = P54_QUEUE_MGMT; i < P54_QUEUE_NUM; i++)
+ total += priv->tx_stats[i].len;
+ return total;
+}
+
+static void p54_flush(struct ieee80211_hw *dev, struct ieee80211_vif *vif,
+ u32 queues, bool drop)
+{
+ struct p54_common *priv = dev->priv;
+ unsigned int total, i;
+
+ /*
+ * Currently, it wouldn't really matter if we wait for one second
+ * or 15 minutes. But once someone gets around and completes the
+ * TODOs [ancel stuck frames / reset device] in p54_work, it will
+ * suddenly make sense to wait that long.
+ */
+ i = P54_STATISTICS_UPDATE * 2 / 20;
+
+ /*
+ * In this case no locking is required because as we speak the
+ * queues have already been stopped and no new frames can sneak
+ * up from behind.
+ */
+ while ((total = p54_flush_count(priv) && i--)) {
+ /* waste time */
+ msleep(20);
+ }
+
+ WARN(total, "tx flush timeout, unresponsive firmware");
+}
+
+static void p54_set_coverage_class(struct ieee80211_hw *dev, u8 coverage_class)
+{
+ struct p54_common *priv = dev->priv;
+
+ mutex_lock(&priv->conf_mutex);
+ /* support all coverage class values as in 802.11-2007 Table 7-27 */
+ priv->coverage_class = clamp_t(u8, coverage_class, 0, 31);
+ p54_set_edcf(priv);
+ mutex_unlock(&priv->conf_mutex);
+}
+
static const struct ieee80211_ops p54_ops = {
.tx = p54_tx_80211,
.start = p54_start,
@@ -519,10 +719,14 @@ static const struct ieee80211_ops p54_ops = {
.sta_remove = p54_sta_add_remove,
.set_key = p54_set_key,
.config = p54_config,
+ .flush = p54_flush,
.bss_info_changed = p54_bss_info_changed,
+ .prepare_multicast = p54_prepare_multicast,
.configure_filter = p54_configure_filter,
.conf_tx = p54_conf_tx,
.get_stats = p54_get_stats,
+ .get_survey = p54_get_survey,
+ .set_coverage_class = p54_set_coverage_class,
};
struct ieee80211_hw *p54_init_common(size_t priv_data_len)
@@ -545,7 +749,7 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK |
- IEEE80211_HW_BEACON_FILTER |
+ IEEE80211_HW_MFP_CAPABLE |
IEEE80211_HW_REPORTS_TX_ACK_STATUS;
dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
@@ -553,7 +757,6 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_MESH_POINT);
- dev->channel_change_time = 1000; /* TODO: find actual value */
priv->beacon_req_id = cpu_to_le32(0);
priv->tx_stats[P54_QUEUE_BEACON].limit = 1;
priv->tx_stats[P54_QUEUE_FWSCAN].limit = 1;
@@ -583,17 +786,21 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
mutex_init(&priv->conf_mutex);
mutex_init(&priv->eeprom_mutex);
+ init_completion(&priv->stat_comp);
init_completion(&priv->eeprom_comp);
init_completion(&priv->beacon_comp);
INIT_DELAYED_WORK(&priv->work, p54_work);
+ memset(&priv->mc_maclist[0], ~0, ETH_ALEN);
+ priv->curchan = NULL;
+ p54_reset_stats(priv);
return dev;
}
EXPORT_SYMBOL_GPL(p54_init_common);
int p54_register_common(struct ieee80211_hw *dev, struct device *pdev)
{
- struct p54_common *priv = dev->priv;
+ struct p54_common __maybe_unused *priv = dev->priv;
int err;
err = ieee80211_register_hw(dev);
@@ -601,11 +808,14 @@ int p54_register_common(struct ieee80211_hw *dev, struct device *pdev)
dev_err(pdev, "Cannot register device (%d).\n", err);
return err;
}
+ priv->registered = true;
#ifdef CONFIG_P54_LEDS
err = p54_init_leds(priv);
- if (err)
+ if (err) {
+ p54_unregister_common(dev);
return err;
+ }
#endif /* CONFIG_P54_LEDS */
dev_info(pdev, "is registered as '%s'\n", wiphy_name(dev->wiphy));
@@ -624,11 +834,15 @@ void p54_free_common(struct ieee80211_hw *dev)
kfree(priv->iq_autocal);
kfree(priv->output_limit);
kfree(priv->curve_data);
+ kfree(priv->rssi_db);
kfree(priv->used_rxkeys);
+ kfree(priv->survey);
priv->iq_autocal = NULL;
priv->output_limit = NULL;
priv->curve_data = NULL;
+ priv->rssi_db = NULL;
priv->used_rxkeys = NULL;
+ priv->survey = NULL;
ieee80211_free_hw(dev);
}
EXPORT_SYMBOL_GPL(p54_free_common);
@@ -641,7 +855,11 @@ void p54_unregister_common(struct ieee80211_hw *dev)
p54_unregister_leds(priv);
#endif /* CONFIG_P54_LEDS */
- ieee80211_unregister_hw(dev);
+ if (priv->registered) {
+ priv->registered = false;
+ ieee80211_unregister_hw(dev);
+ }
+
mutex_destroy(&priv->conf_mutex);
mutex_destroy(&priv->eeprom_mutex);
}
diff --git a/drivers/net/wireless/p54/net2280.h b/drivers/net/wireless/p54/net2280.h
index 4915d9d5420..aedfaf24f38 100644
--- a/drivers/net/wireless/p54/net2280.h
+++ b/drivers/net/wireless/p54/net2280.h
@@ -20,8 +20,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
/*-------------------------------------------------------------------------*/
@@ -232,7 +231,7 @@ struct net2280_regs {
#define GPIO2_INTERRUPT 2
#define GPIO1_INTERRUPT 1
#define GPIO0_INTERRUPT 0
-} __attribute__ ((packed));
+} __packed;
/* usb control, BAR0 + 0x0080 */
struct net2280_usb_regs {
@@ -296,7 +295,7 @@ struct net2280_usb_regs {
#define FORCE_IMMEDIATE 7
#define OUR_USB_ADDRESS 0
__le32 ourconfig;
-} __attribute__ ((packed));
+} __packed;
/* pci control, BAR0 + 0x0100 */
struct net2280_pci_regs {
@@ -323,7 +322,7 @@ struct net2280_pci_regs {
#define PCI_ARBITER_CLEAR 2
#define PCI_EXTERNAL_ARBITER 1
#define PCI_HOST_MODE 0
-} __attribute__ ((packed));
+} __packed;
/* dma control, BAR0 + 0x0180 ... array of four structs like this,
* for channels 0..3. see also struct net2280_dma: descriptor
@@ -364,7 +363,7 @@ struct net2280_dma_regs { /* [11.7] */
__le32 dmaaddr;
__le32 dmadesc;
u32 _unused1;
-} __attribute__ ((packed));
+} __packed;
/* dedicated endpoint registers, BAR0 + 0x0200 */
@@ -374,7 +373,7 @@ struct net2280_dep_regs { /* [11.8] */
/* offset 0x0204, 0x0214, 0x224, 0x234, 0x244 */
__le32 dep_rsp;
u32 _unused[2];
-} __attribute__ ((packed));
+} __packed;
/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs
* like this, for ep0 then the configurable endpoints A..F
@@ -437,16 +436,16 @@ struct net2280_ep_regs { /* [11.9] */
__le32 ep_avail;
__le32 ep_data;
u32 _unused0[2];
-} __attribute__ ((packed));
+} __packed;
struct net2280_reg_write {
__le16 port;
__le32 addr;
__le32 val;
-} __attribute__ ((packed));
+} __packed;
struct net2280_reg_read {
__le16 port;
__le32 addr;
-} __attribute__ ((packed));
+} __packed;
#endif /* NET2280_H */
diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h
index 43a3b2ead81..40b401ed684 100644
--- a/drivers/net/wireless/p54/p54.h
+++ b/drivers/net/wireless/p54/p54.h
@@ -116,7 +116,8 @@ struct p54_edcf_queue_param {
__le16 txop;
} __packed;
-struct p54_rssi_linear_approximation {
+struct p54_rssi_db_entry {
+ u16 freq;
s16 mul;
s16 add;
s16 longbow_unkn;
@@ -172,6 +173,7 @@ struct p54_common {
struct sk_buff_head tx_pending;
struct sk_buff_head tx_queue;
struct mutex conf_mutex;
+ bool registered;
/* memory management (as seen by the firmware) */
u32 rx_start;
@@ -197,24 +199,46 @@ struct p54_common {
u8 rx_diversity_mask;
u8 tx_diversity_mask;
unsigned int output_power;
+ struct p54_rssi_db_entry *cur_rssi;
+ struct ieee80211_channel *curchan;
+ struct survey_info *survey;
+ unsigned int chan_num;
+ struct completion stat_comp;
+ bool update_stats;
+ struct {
+ unsigned int timestamp;
+ unsigned int cached_cca;
+ unsigned int cached_tx;
+ unsigned int cached_rssi;
+ u64 active;
+ u64 cca;
+ u64 tx;
+ u64 rssi;
+ } survey_raw;
+
int noise;
/* calibration, output power limit and rssi<->dBm conversation data */
struct pda_iq_autocal_entry *iq_autocal;
unsigned int iq_autocal_len;
struct p54_cal_database *curve_data;
struct p54_cal_database *output_limit;
- struct p54_rssi_linear_approximation rssical_db[IEEE80211_NUM_BANDS];
+ struct p54_cal_database *rssi_db;
struct ieee80211_supported_band *band_table[IEEE80211_NUM_BANDS];
/* BBP/MAC state */
u8 mac_addr[ETH_ALEN];
u8 bssid[ETH_ALEN];
+ u8 mc_maclist[4][ETH_ALEN];
u16 wakeup_timer;
unsigned int filter_flags;
+ int mc_maclist_num;
int mode;
u32 tsf_low32, tsf_high32;
u32 basic_rate_mask;
u16 aid;
+ u8 coverage_class;
+ bool phy_idle;
+ bool phy_ps;
bool powersave_override;
__le32 beacon_req_id;
struct completion beacon_comp;
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index a5ea89cde8c..d411de40905 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -13,13 +13,13 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/completion.h>
+#include <linux/module.h>
#include <net/mac80211.h>
#include "p54.h"
@@ -199,6 +199,7 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index,
while (i != idx) {
u16 len;
struct sk_buff *skb;
+ dma_addr_t dma_addr;
desc = &ring[i];
len = le16_to_cpu(desc->len);
skb = rx_buf[i];
@@ -216,17 +217,20 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index,
len = priv->common.rx_mtu;
}
+ dma_addr = le32_to_cpu(desc->host_addr);
+ pci_dma_sync_single_for_cpu(priv->pdev, dma_addr,
+ priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE);
skb_put(skb, len);
if (p54_rx(dev, skb)) {
- pci_unmap_single(priv->pdev,
- le32_to_cpu(desc->host_addr),
- priv->common.rx_mtu + 32,
- PCI_DMA_FROMDEVICE);
+ pci_unmap_single(priv->pdev, dma_addr,
+ priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE);
rx_buf[i] = NULL;
- desc->host_addr = 0;
+ desc->host_addr = cpu_to_le32(0);
} else {
skb_trim(skb, 0);
+ pci_dma_sync_single_for_device(priv->pdev, dma_addr,
+ priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE);
desc->len = cpu_to_le16(priv->common.rx_mtu + 32);
}
@@ -327,10 +331,9 @@ static void p54p_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
struct p54p_ring_control *ring_control = priv->ring_control;
struct p54p_desc *desc;
dma_addr_t mapping;
- u32 device_idx, idx, i;
+ u32 idx, i;
spin_lock_irqsave(&priv->lock, flags);
- device_idx = le32_to_cpu(ring_control->device_idx[1]);
idx = le32_to_cpu(ring_control->host_idx[1]);
i = idx % ARRAY_SIZE(ring_control->tx_data);
@@ -466,8 +469,7 @@ static int p54p_open(struct ieee80211_hw *dev)
P54P_READ(dev_int);
if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) {
- printk(KERN_ERR "%s: Cannot boot firmware!\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "Cannot boot firmware!\n");
p54p_stop(dev);
return -ETIMEDOUT;
}
@@ -485,7 +487,59 @@ static int p54p_open(struct ieee80211_hw *dev)
return 0;
}
-static int __devinit p54p_probe(struct pci_dev *pdev,
+static void p54p_firmware_step2(const struct firmware *fw,
+ void *context)
+{
+ struct p54p_priv *priv = context;
+ struct ieee80211_hw *dev = priv->common.hw;
+ struct pci_dev *pdev = priv->pdev;
+ int err;
+
+ if (!fw) {
+ dev_err(&pdev->dev, "Cannot find firmware (isl3886pci)\n");
+ err = -ENOENT;
+ goto out;
+ }
+
+ priv->firmware = fw;
+
+ err = p54p_open(dev);
+ if (err)
+ goto out;
+ err = p54_read_eeprom(dev);
+ p54p_stop(dev);
+ if (err)
+ goto out;
+
+ err = p54_register_common(dev, &pdev->dev);
+ if (err)
+ goto out;
+
+out:
+
+ complete(&priv->fw_loaded);
+
+ if (err) {
+ struct device *parent = pdev->dev.parent;
+
+ if (parent)
+ device_lock(parent);
+
+ /*
+ * This will indirectly result in a call to p54p_remove.
+ * Hence, we don't need to bother with freeing any
+ * allocated ressources at all.
+ */
+ device_release_driver(&pdev->dev);
+
+ if (parent)
+ device_unlock(parent);
+ }
+
+ pci_dev_put(pdev);
+}
+
+static int p54p_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct p54p_priv *priv;
@@ -493,6 +547,7 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
unsigned long mem_addr, mem_len;
int err;
+ pci_dev_get(pdev);
err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "Cannot enable new PCI device\n");
@@ -503,6 +558,7 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
mem_len = pci_resource_len(pdev, 0);
if (mem_len < sizeof(struct p54p_csr)) {
dev_err(&pdev->dev, "Too short PCI resources\n");
+ err = -ENODEV;
goto err_disable_dev;
}
@@ -512,8 +568,10 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
goto err_disable_dev;
}
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) ||
- pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (!err)
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
dev_err(&pdev->dev, "No suitable DMA available\n");
goto err_free_reg;
}
@@ -534,6 +592,7 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
priv = dev->priv;
priv->pdev = pdev;
+ init_completion(&priv->fw_loaded);
SET_IEEE80211_DEV(dev, &pdev->dev);
pci_set_drvdata(pdev, dev);
@@ -558,32 +617,12 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
spin_lock_init(&priv->lock);
tasklet_init(&priv->tasklet, p54p_tasklet, (unsigned long)dev);
- err = request_firmware(&priv->firmware, "isl3886pci",
- &priv->pdev->dev);
- if (err) {
- dev_err(&pdev->dev, "Cannot find firmware (isl3886pci)\n");
- err = request_firmware(&priv->firmware, "isl3886",
- &priv->pdev->dev);
- if (err)
- goto err_free_common;
- }
-
- err = p54p_open(dev);
- if (err)
- goto err_free_common;
- err = p54_read_eeprom(dev);
- p54p_stop(dev);
- if (err)
- goto err_free_common;
+ err = request_firmware_nowait(THIS_MODULE, 1, "isl3886pci",
+ &priv->pdev->dev, GFP_KERNEL,
+ priv, p54p_firmware_step2);
+ if (!err)
+ return 0;
- err = p54_register_common(dev, &pdev->dev);
- if (err)
- goto err_free_common;
-
- return 0;
-
- err_free_common:
- release_firmware(priv->firmware);
pci_free_consistent(pdev, sizeof(*priv->ring_control),
priv->ring_control, priv->ring_control_dma);
@@ -591,17 +630,17 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
iounmap(priv->map);
err_free_dev:
- pci_set_drvdata(pdev, NULL);
p54_free_common(dev);
err_free_reg:
pci_release_regions(pdev);
err_disable_dev:
pci_disable_device(pdev);
+ pci_dev_put(pdev);
return err;
}
-static void __devexit p54p_remove(struct pci_dev *pdev)
+static void p54p_remove(struct pci_dev *pdev)
{
struct ieee80211_hw *dev = pci_get_drvdata(pdev);
struct p54p_priv *priv;
@@ -609,8 +648,9 @@ static void __devexit p54p_remove(struct pci_dev *pdev)
if (!dev)
return;
- p54_unregister_common(dev);
priv = dev->priv;
+ wait_for_completion(&priv->fw_loaded);
+ p54_unregister_common(dev);
release_firmware(priv->firmware);
pci_free_consistent(pdev, sizeof(*priv->ring_control),
priv->ring_control, priv->ring_control_dma);
@@ -620,59 +660,41 @@ static void __devexit p54p_remove(struct pci_dev *pdev)
p54_free_common(dev);
}
-#ifdef CONFIG_PM
-static int p54p_suspend(struct pci_dev *pdev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int p54p_suspend(struct device *device)
{
- struct ieee80211_hw *dev = pci_get_drvdata(pdev);
- struct p54p_priv *priv = dev->priv;
-
- if (priv->common.mode != NL80211_IFTYPE_UNSPECIFIED) {
- ieee80211_stop_queues(dev);
- p54p_stop(dev);
- }
+ struct pci_dev *pdev = to_pci_dev(device);
pci_save_state(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ pci_set_power_state(pdev, PCI_D3hot);
+ pci_disable_device(pdev);
return 0;
}
-static int p54p_resume(struct pci_dev *pdev)
+static int p54p_resume(struct device *device)
{
- struct ieee80211_hw *dev = pci_get_drvdata(pdev);
- struct p54p_priv *priv = dev->priv;
+ struct pci_dev *pdev = to_pci_dev(device);
+ int err;
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
+ err = pci_reenable_device(pdev);
+ if (err)
+ return err;
+ return pci_set_power_state(pdev, PCI_D0);
+}
- if (priv->common.mode != NL80211_IFTYPE_UNSPECIFIED) {
- p54p_open(dev);
- ieee80211_wake_queues(dev);
- }
+static SIMPLE_DEV_PM_OPS(p54pci_pm_ops, p54p_suspend, p54p_resume);
- return 0;
-}
-#endif /* CONFIG_PM */
+#define P54P_PM_OPS (&p54pci_pm_ops)
+#else
+#define P54P_PM_OPS (NULL)
+#endif /* CONFIG_PM_SLEEP */
static struct pci_driver p54p_driver = {
.name = "p54pci",
.id_table = p54p_table,
.probe = p54p_probe,
- .remove = __devexit_p(p54p_remove),
-#ifdef CONFIG_PM
- .suspend = p54p_suspend,
- .resume = p54p_resume,
-#endif /* CONFIG_PM */
+ .remove = p54p_remove,
+ .driver.pm = P54P_PM_OPS,
};
-static int __init p54p_init(void)
-{
- return pci_register_driver(&p54p_driver);
-}
-
-static void __exit p54p_exit(void)
-{
- pci_unregister_driver(&p54p_driver);
-}
-
-module_init(p54p_init);
-module_exit(p54p_exit);
+module_pci_driver(p54p_driver);
diff --git a/drivers/net/wireless/p54/p54pci.h b/drivers/net/wireless/p54/p54pci.h
index 2feead617a3..68405c142f9 100644
--- a/drivers/net/wireless/p54/p54pci.h
+++ b/drivers/net/wireless/p54/p54pci.h
@@ -1,5 +1,6 @@
#ifndef P54PCI_H
#define P54PCI_H
+#include <linux/interrupt.h>
/*
* Defines for PCI based mac80211 Prism54 driver
@@ -65,7 +66,7 @@ struct p54p_csr {
u8 unused_6[1924];
u8 cardbus_cis[0x800];
u8 direct_mem_win[0x1000];
-} __attribute__ ((packed));
+} __packed;
/* usb backend only needs the register defines above */
#ifndef P54USB_H
@@ -74,7 +75,7 @@ struct p54p_desc {
__le32 device_addr;
__le16 len;
__le16 flags;
-} __attribute__ ((packed));
+} __packed;
struct p54p_ring_control {
__le32 host_idx[4];
@@ -83,7 +84,7 @@ struct p54p_ring_control {
struct p54p_desc tx_data[32];
struct p54p_desc rx_mgmt[4];
struct p54p_desc tx_mgmt[4];
-} __attribute__ ((packed));
+} __packed;
#define P54P_READ(r) (__force __le32)__raw_readl(&priv->map->r)
#define P54P_WRITE(r, val) __raw_writel((__force u32)(__le32)(val), &priv->map->r)
@@ -104,6 +105,7 @@ struct p54p_priv {
struct sk_buff *tx_buf_data[32];
struct sk_buff *tx_buf_mgmt[4];
struct completion boot_comp;
+ struct completion fw_loaded;
};
#endif /* P54USB_H */
diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
index c8f09da1f84..de15171e2cd 100644
--- a/drivers/net/wireless/p54/p54spi.c
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -32,16 +32,17 @@
#include <linux/slab.h>
#include "p54spi.h"
-#include "p54spi_eeprom.h"
#include "p54.h"
#include "lmac.h"
+#ifdef CONFIG_P54_SPI_DEFAULT_EEPROM
+#include "p54spi_eeprom.h"
+#endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */
+
MODULE_FIRMWARE("3826.arm");
-MODULE_ALIAS("stlc45xx");
-/*
- * gpios should be handled in board files and provided via platform data,
+/* gpios should be handled in board files and provided via platform data,
* but because it's currently impossible for p54spi to have a header file
* in include/linux, let's use module paramaters for now
*/
@@ -189,15 +190,18 @@ static int p54spi_request_eeprom(struct ieee80211_hw *dev)
const struct firmware *eeprom;
int ret;
- /*
- * allow users to customize their eeprom.
+ /* allow users to customize their eeprom.
*/
ret = request_firmware(&eeprom, "3826.eeprom", &priv->spi->dev);
if (ret < 0) {
+#ifdef CONFIG_P54_SPI_DEFAULT_EEPROM
dev_info(&priv->spi->dev, "loading default eeprom...\n");
ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom,
sizeof(p54spi_eeprom));
+#else
+ dev_err(&priv->spi->dev, "Failed to request user eeprom\n");
+#endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */
} else {
dev_info(&priv->spi->dev, "loading user eeprom...\n");
ret = p54_parse_eeprom(dev, (void *) eeprom->data,
@@ -279,8 +283,7 @@ static void p54spi_power_on(struct p54s_priv *priv)
gpio_set_value(p54spi_gpio_power, 1);
enable_irq(gpio_to_irq(p54spi_gpio_irq));
- /*
- * need to wait a while before device can be accessed, the lenght
+ /* need to wait a while before device can be accessed, the length
* is just a guess
*/
msleep(10);
@@ -359,7 +362,8 @@ static int p54spi_rx(struct p54s_priv *priv)
/* Firmware may insert up to 4 padding bytes after the lmac header,
* but it does not amend the size of SPI data transfer.
* Such packets has correct data size in header, thus referencing
- * past the end of allocated skb. Reserve extra 4 bytes for this case */
+ * past the end of allocated skb. Reserve extra 4 bytes for this case
+ */
skb = dev_alloc_skb(len + 4);
if (!skb) {
p54spi_sleep(priv);
@@ -377,7 +381,8 @@ static int p54spi_rx(struct p54s_priv *priv)
}
p54spi_sleep(priv);
/* Put additional bytes to compensate for the possible
- * alignment-caused truncation */
+ * alignment-caused truncation
+ */
skb_put(skb, 4);
if (p54_rx(priv->hw, skb) == 0)
@@ -390,7 +395,7 @@ static int p54spi_rx(struct p54s_priv *priv)
static irqreturn_t p54spi_interrupt(int irq, void *config)
{
struct spi_device *spi = config;
- struct p54s_priv *priv = dev_get_drvdata(&spi->dev);
+ struct p54s_priv *priv = spi_get_drvdata(spi);
ieee80211_queue_work(priv->hw, &priv->work);
@@ -575,15 +580,9 @@ static void p54spi_op_stop(struct ieee80211_hw *dev)
struct p54s_priv *priv = dev->priv;
unsigned long flags;
- if (mutex_lock_interruptible(&priv->mutex)) {
- /* FIXME: how to handle this error? */
- return;
- }
-
+ mutex_lock(&priv->mutex);
WARN_ON(priv->fw_state != FW_STATE_READY);
- cancel_work_sync(&priv->work);
-
p54spi_power_off(priv);
spin_lock_irqsave(&priv->tx_lock, flags);
INIT_LIST_HEAD(&priv->tx_pending);
@@ -591,9 +590,11 @@ static void p54spi_op_stop(struct ieee80211_hw *dev)
priv->fw_state = FW_STATE_OFF;
mutex_unlock(&priv->mutex);
+
+ cancel_work_sync(&priv->work);
}
-static int __devinit p54spi_probe(struct spi_device *spi)
+static int p54spi_probe(struct spi_device *spi)
{
struct p54s_priv *priv = NULL;
struct ieee80211_hw *hw;
@@ -607,7 +608,7 @@ static int __devinit p54spi_probe(struct spi_device *spi)
priv = hw->priv;
priv->hw = hw;
- dev_set_drvdata(&spi->dev, priv);
+ spi_set_drvdata(spi, priv);
priv->spi = spi;
spi->bits_per_word = 16;
@@ -616,34 +617,33 @@ static int __devinit p54spi_probe(struct spi_device *spi)
ret = spi_setup(spi);
if (ret < 0) {
dev_err(&priv->spi->dev, "spi_setup failed");
- goto err_free_common;
+ goto err_free;
}
ret = gpio_request(p54spi_gpio_power, "p54spi power");
if (ret < 0) {
dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
- goto err_free_common;
+ goto err_free;
}
ret = gpio_request(p54spi_gpio_irq, "p54spi irq");
if (ret < 0) {
dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
- goto err_free_common;
+ goto err_free_gpio_power;
}
gpio_direction_output(p54spi_gpio_power, 0);
gpio_direction_input(p54spi_gpio_irq);
ret = request_irq(gpio_to_irq(p54spi_gpio_irq),
- p54spi_interrupt, IRQF_DISABLED, "p54spi",
+ p54spi_interrupt, 0, "p54spi",
priv->spi);
if (ret < 0) {
dev_err(&priv->spi->dev, "request_irq() failed");
- goto err_free_common;
+ goto err_free_gpio_irq;
}
- set_irq_type(gpio_to_irq(p54spi_gpio_irq),
- IRQ_TYPE_EDGE_RISING);
+ irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING);
disable_irq(gpio_to_irq(p54spi_gpio_irq));
@@ -651,6 +651,7 @@ static int __devinit p54spi_probe(struct spi_device *spi)
init_completion(&priv->fw_comp);
INIT_LIST_HEAD(&priv->tx_pending);
mutex_init(&priv->mutex);
+ spin_lock_init(&priv->tx_lock);
SET_IEEE80211_DEV(hw, &spi->dev);
priv->common.open = p54spi_op_start;
priv->common.stop = p54spi_op_stop;
@@ -671,13 +672,19 @@ static int __devinit p54spi_probe(struct spi_device *spi)
return 0;
err_free_common:
+ free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
+err_free_gpio_irq:
+ gpio_free(p54spi_gpio_irq);
+err_free_gpio_power:
+ gpio_free(p54spi_gpio_power);
+err_free:
p54_free_common(priv->hw);
return ret;
}
-static int __devexit p54spi_remove(struct spi_device *spi)
+static int p54spi_remove(struct spi_device *spi)
{
- struct p54s_priv *priv = dev_get_drvdata(&spi->dev);
+ struct p54s_priv *priv = spi_get_drvdata(spi);
p54_unregister_common(priv->hw);
@@ -697,39 +704,18 @@ static int __devexit p54spi_remove(struct spi_device *spi)
static struct spi_driver p54spi_driver = {
.driver = {
- /* use cx3110x name because board-n800.c uses that for the
- * SPI port */
- .name = "cx3110x",
- .bus = &spi_bus_type,
+ .name = "p54spi",
.owner = THIS_MODULE,
},
.probe = p54spi_probe,
- .remove = __devexit_p(p54spi_remove),
+ .remove = p54spi_remove,
};
-static int __init p54spi_init(void)
-{
- int ret;
-
- ret = spi_register_driver(&p54spi_driver);
- if (ret < 0) {
- printk(KERN_ERR "failed to register SPI driver: %d", ret);
- goto out;
- }
-
-out:
- return ret;
-}
-
-static void __exit p54spi_exit(void)
-{
- spi_unregister_driver(&p54spi_driver);
-}
-
-module_init(p54spi_init);
-module_exit(p54spi_exit);
+module_spi_driver(p54spi_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>");
MODULE_ALIAS("spi:cx3110x");
+MODULE_ALIAS("spi:p54spi");
+MODULE_ALIAS("spi:stlc45xx");
diff --git a/drivers/net/wireless/p54/p54spi.h b/drivers/net/wireless/p54/p54spi.h
index 7fbe8d8fc67..dfaa62aaeb0 100644
--- a/drivers/net/wireless/p54/p54spi.h
+++ b/drivers/net/wireless/p54/p54spi.h
@@ -96,7 +96,7 @@ struct p54s_dma_regs {
__le16 cmd;
__le16 len;
__le32 addr;
-} __attribute__ ((packed));
+} __packed;
struct p54s_tx_info {
struct list_head tx_list;
diff --git a/drivers/net/wireless/p54/p54spi_eeprom.h b/drivers/net/wireless/p54/p54spi_eeprom.h
index 1ea1050911d..0b7bfb0adcf 100644
--- a/drivers/net/wireless/p54/p54spi_eeprom.h
+++ b/drivers/net/wireless/p54/p54spi_eeprom.h
@@ -65,9 +65,10 @@ static unsigned char p54spi_eeprom[] = {
0x03, 0x00, 0x00, 0x11, /* PDR_ANTENNA_GAIN */
0x08, 0x08, 0x08, 0x08,
-0x09, 0x00, 0xad, 0xde, /* PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM */
- 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x0a, 0x00, 0xff, 0xca, /* PDR_RSSI_LINEAR_APPROXIMATION_CUSTOMV2 */
+ 0x01, 0x00, 0x0a, 0x00,
+ 0x00, 0x00, 0x0a, 0x00,
+ 0x85, 0x09, 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00,
/* struct pda_custom_wrapper */
0x10, 0x06, 0x5d, 0xb0, /* PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM */
@@ -671,7 +672,7 @@ static unsigned char p54spi_eeprom[] = {
0xa8, 0x09, 0x25, 0x00, 0xf5, 0xff, 0xf9, 0xff, 0x00, 0x01,
0x02, 0x00, 0x00, 0x00, /* PDR_END */
- 0xa8, 0xf5 /* bogus data */
+ 0xb6, 0x04,
};
#endif /* P54SPI_EEPROM_H */
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 73073259f50..043bd1c23c1 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -12,7 +12,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
#include <linux/usb.h>
#include <linux/pci.h>
#include <linux/slab.h>
@@ -20,6 +19,7 @@
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/crc32.h>
+#include <linux/module.h>
#include <net/mac80211.h>
#include "p54.h"
@@ -33,9 +33,20 @@ MODULE_ALIAS("prism54usb");
MODULE_FIRMWARE("isl3886usb");
MODULE_FIRMWARE("isl3887usb");
-static struct usb_device_id p54u_table[] __devinitdata = {
+/*
+ * Note:
+ *
+ * Always update our wiki's device list (located at:
+ * http://wireless.kernel.org/en/users/Drivers/p54/devices ),
+ * whenever you add a new device.
+ */
+
+static struct usb_device_id p54u_table[] = {
/* Version 1 devices (pci chip + net2280) */
+ {USB_DEVICE(0x0411, 0x0050)}, /* Buffalo WLI2-USB2-G54 */
+ {USB_DEVICE(0x045e, 0x00c2)}, /* Microsoft MN-710 */
{USB_DEVICE(0x0506, 0x0a11)}, /* 3COM 3CRWE254G72 */
+ {USB_DEVICE(0x0675, 0x0530)}, /* DrayTek Vigor 530 */
{USB_DEVICE(0x06b9, 0x0120)}, /* Thomson SpeedTouch 120g */
{USB_DEVICE(0x0707, 0xee06)}, /* SMC 2862W-G */
{USB_DEVICE(0x07aa, 0x001c)}, /* Corega CG-WLUSB2GT */
@@ -46,12 +57,20 @@ static struct usb_device_id p54u_table[] __devinitdata = {
{USB_DEVICE(0x0846, 0x4210)}, /* Netgear WG121 the second ? */
{USB_DEVICE(0x0846, 0x4220)}, /* Netgear WG111 */
{USB_DEVICE(0x09aa, 0x1000)}, /* Spinnaker Proto board */
+ {USB_DEVICE(0x0bf8, 0x1007)}, /* Fujitsu E-5400 USB */
{USB_DEVICE(0x0cde, 0x0006)}, /* Medion 40900, Roper Europe */
+ {USB_DEVICE(0x0db0, 0x6826)}, /* MSI UB54G (MS-6826) */
+ {USB_DEVICE(0x107b, 0x55f2)}, /* Gateway WGU-210 (Gemtek) */
{USB_DEVICE(0x124a, 0x4023)}, /* Shuttle PN15, Airvast WM168g, IOGear GWU513 */
+ {USB_DEVICE(0x1435, 0x0210)}, /* Inventel UR054G */
+ {USB_DEVICE(0x15a9, 0x0002)}, /* Gemtek WUBI-100GW 802.11g */
+ {USB_DEVICE(0x1630, 0x0005)}, /* 2Wire 802.11g USB (v1) / Z-Com */
+ {USB_DEVICE(0x182d, 0x096b)}, /* Sitecom WL-107 */
{USB_DEVICE(0x1915, 0x2234)}, /* Linksys WUSB54G OEM */
{USB_DEVICE(0x1915, 0x2235)}, /* Linksys WUSB54G Portable OEM */
{USB_DEVICE(0x2001, 0x3701)}, /* DLink DWL-G120 Spinnaker */
{USB_DEVICE(0x2001, 0x3703)}, /* DLink DWL-G122 */
+ {USB_DEVICE(0x2001, 0x3762)}, /* Conceptronic C54U */
{USB_DEVICE(0x5041, 0x2234)}, /* Linksys WUSB54G */
{USB_DEVICE(0x5041, 0x2235)}, /* Linksys WUSB54G Portable */
@@ -60,16 +79,22 @@ static struct usb_device_id p54u_table[] __devinitdata = {
{USB_DEVICE(0x050d, 0x7050)}, /* Belkin F5D7050 ver 1000 */
{USB_DEVICE(0x0572, 0x2000)}, /* Cohiba Proto board */
{USB_DEVICE(0x0572, 0x2002)}, /* Cohiba Proto board */
+ {USB_DEVICE(0x06a9, 0x000e)}, /* Westell 802.11g USB (A90-211WG-01) */
{USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */
{USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */
+ {USB_DEVICE(0x07aa, 0x0020)}, /* Corega WLUSB2GTST USB */
+ {USB_DEVICE(0x0803, 0x4310)}, /* Zoom 4410a */
{USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */
+ {USB_DEVICE(0x083a, 0x4531)}, /* T-Com Sinus 154 data II */
+ {USB_DEVICE(0x083a, 0xc501)}, /* Zoom Wireless-G 4410 */
{USB_DEVICE(0x083a, 0xf503)}, /* Accton FD7050E ver 1010ec */
{USB_DEVICE(0x0846, 0x4240)}, /* Netgear WG111 (v2) */
{USB_DEVICE(0x0915, 0x2000)}, /* Cohiba Proto board */
{USB_DEVICE(0x0915, 0x2002)}, /* Cohiba Proto board */
{USB_DEVICE(0x0baf, 0x0118)}, /* U.S. Robotics U5 802.11g Adapter*/
{USB_DEVICE(0x0bf8, 0x1009)}, /* FUJITSU E-5400 USB D1700*/
- {USB_DEVICE(0x0cde, 0x0006)}, /* Medion MD40900 */
+ /* {USB_DEVICE(0x0cde, 0x0006)}, * Medion MD40900 already listed above,
+ * just noting it here for clarity */
{USB_DEVICE(0x0cde, 0x0008)}, /* Sagem XG703A */
{USB_DEVICE(0x0cde, 0x0015)}, /* Zcomax XG-705A */
{USB_DEVICE(0x0d8e, 0x3762)}, /* DLink DWL-G120 Cohiba */
@@ -79,7 +104,11 @@ static struct usb_device_id p54u_table[] __devinitdata = {
{USB_DEVICE(0x13B1, 0x000C)}, /* Linksys WUSB54AG */
{USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */
{USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */
+ /* {USB_DEVICE(0x15a9, 0x0002)}, * Also SparkLAN WL-682 with 3887 */
+ {USB_DEVICE(0x1668, 0x1050)}, /* Actiontec 802UIG-1 */
+ {USB_DEVICE(0x1740, 0x1000)}, /* Senao NUB-350 */
{USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */
+ {USB_DEVICE(0x2001, 0x3705)}, /* D-Link DWL-G120 rev C1 */
{USB_DEVICE(0x413c, 0x5513)}, /* Dell WLA3310 USB Wireless Adapter */
{USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */
{USB_DEVICE(0x413c, 0x8104)}, /* Cohiba Proto board */
@@ -92,21 +121,18 @@ static const struct {
u32 intf;
enum p54u_hw_type type;
const char *fw;
- const char *fw_legacy;
char hw[20];
} p54u_fwlist[__NUM_P54U_HWTYPES] = {
{
.type = P54U_NET2280,
.intf = FW_LM86,
.fw = "isl3886usb",
- .fw_legacy = "isl3890usb",
.hw = "ISL3886 + net2280",
},
{
.type = P54U_3887,
.intf = FW_LM87,
.fw = "isl3887usb",
- .fw_legacy = "isl3887usb_bare",
.hw = "ISL3887",
},
};
@@ -169,7 +195,7 @@ static void p54u_rx_cb(struct urb *urb)
static void p54u_tx_cb(struct urb *urb)
{
struct sk_buff *skb = urb->context;
- struct ieee80211_hw *dev = (struct ieee80211_hw *)
+ struct ieee80211_hw *dev =
usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
p54_free_skb(dev, skb);
@@ -183,6 +209,16 @@ static void p54u_free_urbs(struct ieee80211_hw *dev)
usb_kill_anchored_urbs(&priv->submitted);
}
+static void p54u_stop(struct ieee80211_hw *dev)
+{
+ /*
+ * TODO: figure out how to reliably stop the 3887 and net2280 so
+ * the hardware is still usable next time we want to start it.
+ * until then, we just stop listening to the hardware..
+ */
+ p54u_free_urbs(dev);
+}
+
static int p54u_init_urbs(struct ieee80211_hw *dev)
{
struct p54u_priv *priv = dev->priv;
@@ -232,6 +268,16 @@ static int p54u_init_urbs(struct ieee80211_hw *dev)
return ret;
}
+static int p54u_open(struct ieee80211_hw *dev)
+{
+ /*
+ * TODO: Because we don't know how to reliably stop the 3887 and
+ * the isl3886+net2280, other than brutally cut off all
+ * communications. We have to reinitialize the urbs on every start.
+ */
+ return p54u_init_urbs(dev);
+}
+
static __le32 p54u_lm87_chksum(const __le32 *data, size_t length)
{
u32 chk = 0;
@@ -434,10 +480,9 @@ static int p54u_firmware_reset_3887(struct ieee80211_hw *dev)
u8 *buf;
int ret;
- buf = kmalloc(4, GFP_KERNEL);
+ buf = kmemdup(p54u_romboot_3887, 4, GFP_KERNEL);
if (!buf)
return -ENOMEM;
- memcpy(buf, p54u_romboot_3887, 4);
ret = p54u_bulk_msg(priv, P54U_PIPE_DATA,
buf, 4);
kfree(buf);
@@ -465,13 +510,10 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
return err;
tmp = buf = kmalloc(P54U_FW_BLOCK, GFP_KERNEL);
- if (!buf) {
- dev_err(&priv->udev->dev, "(p54usb) cannot allocate firmware"
- "upload buffer!\n");
+ if (!buf)
return -ENOMEM;
- }
- left = block_size = min((size_t)P54U_FW_BLOCK, priv->fw->size);
+ left = block_size = min_t(size_t, P54U_FW_BLOCK, priv->fw->size);
strcpy(buf, p54u_firmware_upload_3887);
left -= strlen(p54u_firmware_upload_3887);
tmp += strlen(p54u_firmware_upload_3887);
@@ -592,11 +634,8 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
const u8 *data;
buf = kmalloc(512, GFP_KERNEL);
- if (!buf) {
- dev_err(&priv->udev->dev, "(p54usb) firmware buffer "
- "alloc failed!\n");
+ if (!buf)
return -ENOMEM;
- }
#define P54U_WRITE(type, addr, data) \
do {\
@@ -812,73 +851,141 @@ fail:
return err;
}
-static int p54u_load_firmware(struct ieee80211_hw *dev)
+static int p54_find_type(struct p54u_priv *priv)
{
- struct p54u_priv *priv = dev->priv;
- int err, i;
-
- BUILD_BUG_ON(ARRAY_SIZE(p54u_fwlist) != __NUM_P54U_HWTYPES);
+ int i;
for (i = 0; i < __NUM_P54U_HWTYPES; i++)
if (p54u_fwlist[i].type == priv->hw_type)
break;
-
if (i == __NUM_P54U_HWTYPES)
return -EOPNOTSUPP;
- err = request_firmware(&priv->fw, p54u_fwlist[i].fw, &priv->udev->dev);
- if (err) {
- dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s "
- "(%d)!\n", p54u_fwlist[i].fw, err);
+ return i;
+}
- err = request_firmware(&priv->fw, p54u_fwlist[i].fw_legacy,
- &priv->udev->dev);
- if (err)
- return err;
- }
+static int p54u_start_ops(struct p54u_priv *priv)
+{
+ struct ieee80211_hw *dev = priv->common.hw;
+ int ret;
- err = p54_parse_firmware(dev, priv->fw);
- if (err)
- goto out;
+ ret = p54_parse_firmware(dev, priv->fw);
+ if (ret)
+ goto err_out;
- if (priv->common.fw_interface != p54u_fwlist[i].intf) {
+ ret = p54_find_type(priv);
+ if (ret < 0)
+ goto err_out;
+
+ if (priv->common.fw_interface != p54u_fwlist[ret].intf) {
dev_err(&priv->udev->dev, "wrong firmware, please get "
"a firmware for \"%s\" and try again.\n",
- p54u_fwlist[i].hw);
- err = -EINVAL;
+ p54u_fwlist[ret].hw);
+ ret = -ENODEV;
+ goto err_out;
}
-out:
- if (err)
- release_firmware(priv->fw);
+ ret = priv->upload_fw(dev);
+ if (ret)
+ goto err_out;
- return err;
+ ret = p54u_open(dev);
+ if (ret)
+ goto err_out;
+
+ ret = p54_read_eeprom(dev);
+ if (ret)
+ goto err_stop;
+
+ p54u_stop(dev);
+
+ ret = p54_register_common(dev, &priv->udev->dev);
+ if (ret)
+ goto err_stop;
+
+ return 0;
+
+err_stop:
+ p54u_stop(dev);
+
+err_out:
+ /*
+ * p54u_disconnect will do the rest of the
+ * cleanup
+ */
+ return ret;
}
-static int p54u_open(struct ieee80211_hw *dev)
+static void p54u_load_firmware_cb(const struct firmware *firmware,
+ void *context)
{
- struct p54u_priv *priv = dev->priv;
+ struct p54u_priv *priv = context;
+ struct usb_device *udev = priv->udev;
int err;
- err = p54u_init_urbs(dev);
- if (err) {
- return err;
+ complete(&priv->fw_wait_load);
+ if (firmware) {
+ priv->fw = firmware;
+ err = p54u_start_ops(priv);
+ } else {
+ err = -ENOENT;
+ dev_err(&udev->dev, "Firmware not found.\n");
}
- priv->common.open = p54u_init_urbs;
+ if (err) {
+ struct device *parent = priv->udev->dev.parent;
- return 0;
+ dev_err(&udev->dev, "failed to initialize device (%d)\n", err);
+
+ if (parent)
+ device_lock(parent);
+
+ device_release_driver(&udev->dev);
+ /*
+ * At this point p54u_disconnect has already freed
+ * the "priv" context. Do not use it anymore!
+ */
+ priv = NULL;
+
+ if (parent)
+ device_unlock(parent);
+ }
+
+ usb_put_dev(udev);
}
-static void p54u_stop(struct ieee80211_hw *dev)
+static int p54u_load_firmware(struct ieee80211_hw *dev,
+ struct usb_interface *intf)
{
- /* TODO: figure out how to reliably stop the 3887 and net2280 so
- the hardware is still usable next time we want to start it.
- until then, we just stop listening to the hardware.. */
- p54u_free_urbs(dev);
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct p54u_priv *priv = dev->priv;
+ struct device *device = &udev->dev;
+ int err, i;
+
+ BUILD_BUG_ON(ARRAY_SIZE(p54u_fwlist) != __NUM_P54U_HWTYPES);
+
+ init_completion(&priv->fw_wait_load);
+ i = p54_find_type(priv);
+ if (i < 0)
+ return i;
+
+ dev_info(&priv->udev->dev, "Loading firmware file %s\n",
+ p54u_fwlist[i].fw);
+
+ usb_get_dev(udev);
+ err = request_firmware_nowait(THIS_MODULE, 1, p54u_fwlist[i].fw,
+ device, GFP_KERNEL, priv,
+ p54u_load_firmware_cb);
+ if (err) {
+ dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s "
+ "(%d)!\n", p54u_fwlist[i].fw, err);
+ usb_put_dev(udev);
+ }
+
+ return err;
}
-static int __devinit p54u_probe(struct usb_interface *intf,
+static int p54u_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
@@ -930,8 +1037,8 @@ static int __devinit p54u_probe(struct usb_interface *intf,
#ifdef CONFIG_PM
/* ISL3887 needs a full reset on resume */
udev->reset_resume = 1;
+#endif /* CONFIG_PM */
err = p54u_device_reset(dev);
-#endif
priv->hw_type = P54U_3887;
dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr);
@@ -945,37 +1052,15 @@ static int __devinit p54u_probe(struct usb_interface *intf,
priv->common.tx = p54u_tx_net2280;
priv->upload_fw = p54u_upload_firmware_net2280;
}
- err = p54u_load_firmware(dev);
- if (err)
- goto err_free_dev;
-
- err = priv->upload_fw(dev);
- if (err)
- goto err_free_fw;
-
- p54u_open(dev);
- err = p54_read_eeprom(dev);
- p54u_stop(dev);
- if (err)
- goto err_free_fw;
-
- err = p54_register_common(dev, &udev->dev);
- if (err)
- goto err_free_fw;
-
- return 0;
-
-err_free_fw:
- release_firmware(priv->fw);
-
-err_free_dev:
- p54_free_common(dev);
- usb_set_intfdata(intf, NULL);
- usb_put_dev(udev);
+ err = p54u_load_firmware(dev, intf);
+ if (err) {
+ usb_put_dev(udev);
+ p54_free_common(dev);
+ }
return err;
}
-static void __devexit p54u_disconnect(struct usb_interface *intf)
+static void p54u_disconnect(struct usb_interface *intf)
{
struct ieee80211_hw *dev = usb_get_intfdata(intf);
struct p54u_priv *priv;
@@ -983,9 +1068,10 @@ static void __devexit p54u_disconnect(struct usb_interface *intf)
if (!dev)
return;
+ priv = dev->priv;
+ wait_for_completion(&priv->fw_wait_load);
p54_unregister_common(dev);
- priv = dev->priv;
usb_put_dev(interface_to_usbdev(intf));
release_firmware(priv->fw);
p54_free_common(dev);
@@ -1057,17 +1143,7 @@ static struct usb_driver p54u_driver = {
.reset_resume = p54u_resume,
#endif /* CONFIG_PM */
.soft_unbind = 1,
+ .disable_hub_initiated_lpm = 1,
};
-static int __init p54u_init(void)
-{
- return usb_register(&p54u_driver);
-}
-
-static void __exit p54u_exit(void)
-{
- usb_deregister(&p54u_driver);
-}
-
-module_init(p54u_init);
-module_exit(p54u_exit);
+module_usb_driver(p54u_driver);
diff --git a/drivers/net/wireless/p54/p54usb.h b/drivers/net/wireless/p54/p54usb.h
index e935b79f7f7..d273be7272b 100644
--- a/drivers/net/wireless/p54/p54usb.h
+++ b/drivers/net/wireless/p54/p54usb.h
@@ -70,12 +70,12 @@ struct net2280_tx_hdr {
__le16 len;
__le16 follower; /* ? */
u8 padding[8];
-} __attribute__((packed));
+} __packed;
struct lm87_tx_hdr {
__le32 device_addr;
__le32 chksum;
-} __attribute__((packed));
+} __packed;
/* Some flags for the isl hardware registers controlling DMA inside the
* chip */
@@ -103,7 +103,7 @@ struct x2_header {
__le32 fw_load_addr;
__le32 fw_length;
__le32 crc;
-} __attribute__((packed));
+} __packed;
/* pipes 3 and 4 are not used by the driver */
#define P54U_PIPE_NUMBER 9
@@ -143,6 +143,9 @@ struct p54u_priv {
struct sk_buff_head rx_queue;
struct usb_anchor submitted;
const struct firmware *fw;
+
+ /* asynchronous firmware callback */
+ struct completion fw_wait_load;
};
#endif /* P54USB_H */
diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c
index 4e6891099d4..153c61539ec 100644
--- a/drivers/net/wireless/p54/txrx.c
+++ b/drivers/net/wireless/p54/txrx.c
@@ -16,9 +16,10 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
+#include <linux/export.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
+#include <asm/div64.h>
#include <net/mac80211.h>
@@ -38,8 +39,8 @@ static void p54_dump_tx_queue(struct p54_common *priv)
u32 largest_hole = 0, free;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
- printk(KERN_DEBUG "%s: / --- tx queue dump (%d entries) ---\n",
- wiphy_name(priv->hw->wiphy), skb_queue_len(&priv->tx_queue));
+ wiphy_debug(priv->hw->wiphy, "/ --- tx queue dump (%d entries) ---\n",
+ skb_queue_len(&priv->tx_queue));
prev_addr = priv->rx_start;
skb_queue_walk(&priv->tx_queue, skb) {
@@ -48,21 +49,23 @@ static void p54_dump_tx_queue(struct p54_common *priv)
hdr = (void *) skb->data;
free = range->start_addr - prev_addr;
- printk(KERN_DEBUG "%s: | [%02d] => [skb:%p skb_len:0x%04x "
- "hdr:{flags:%02x len:%04x req_id:%04x type:%02x} "
- "mem:{start:%04x end:%04x, free:%d}]\n",
- wiphy_name(priv->hw->wiphy), i++, skb, skb->len,
- le16_to_cpu(hdr->flags), le16_to_cpu(hdr->len),
- le32_to_cpu(hdr->req_id), le16_to_cpu(hdr->type),
- range->start_addr, range->end_addr, free);
+ wiphy_debug(priv->hw->wiphy,
+ "| [%02d] => [skb:%p skb_len:0x%04x "
+ "hdr:{flags:%02x len:%04x req_id:%04x type:%02x} "
+ "mem:{start:%04x end:%04x, free:%d}]\n",
+ i++, skb, skb->len,
+ le16_to_cpu(hdr->flags), le16_to_cpu(hdr->len),
+ le32_to_cpu(hdr->req_id), le16_to_cpu(hdr->type),
+ range->start_addr, range->end_addr, free);
prev_addr = range->end_addr;
largest_hole = max(largest_hole, free);
}
free = priv->rx_end - prev_addr;
largest_hole = max(largest_hole, free);
- printk(KERN_DEBUG "%s: \\ --- [free: %d], largest free block: %d ---\n",
- wiphy_name(priv->hw->wiphy), free, largest_hole);
+ wiphy_debug(priv->hw->wiphy,
+ "\\ --- [free: %d], largest free block: %d ---\n",
+ free, largest_hole);
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
}
#endif /* P54_MM_DEBUG */
@@ -238,7 +241,7 @@ void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb)
skb_unlink(skb, &priv->tx_queue);
p54_tx_qos_accounting_free(priv, skb);
- dev_kfree_skb_any(skb);
+ ieee80211_free_txskb(dev, skb);
}
EXPORT_SYMBOL_GPL(p54_free_skb);
@@ -271,17 +274,15 @@ void p54_tx(struct p54_common *priv, struct sk_buff *skb)
static int p54_rssi_to_dbm(struct p54_common *priv, int rssi)
{
- int band = priv->hw->conf.channel->band;
-
- if (priv->rxhw != 5)
- return ((rssi * priv->rssical_db[band].mul) / 64 +
- priv->rssical_db[band].add) / 4;
- else
+ if (priv->rxhw != 5) {
+ return ((rssi * priv->cur_rssi->mul) / 64 +
+ priv->cur_rssi->add) / 4;
+ } else {
/*
* TODO: find the correct formula
*/
- return ((rssi * priv->rssical_db[band].mul) / 64 +
- priv->rssical_db[band].add) / 4;
+ return rssi / 2 - 110;
+ }
}
/*
@@ -306,7 +307,7 @@ static void p54_pspoll_workaround(struct p54_common *priv, struct sk_buff *skb)
return;
/* only consider beacons from the associated BSSID */
- if (compare_ether_addr(hdr->addr3, priv->bssid))
+ if (!ether_addr_equal_64bits(hdr->addr3, priv->bssid))
return;
tim = p54_find_ie(skb, WLAN_EID_TIM);
@@ -352,13 +353,13 @@ static int p54_rx_data(struct p54_common *priv, struct sk_buff *skb)
rx_status->signal = p54_rssi_to_dbm(priv, hdr->rssi);
if (hdr->rate & 0x10)
rx_status->flag |= RX_FLAG_SHORTPRE;
- if (priv->hw->conf.channel->band == IEEE80211_BAND_5GHZ)
+ if (priv->hw->conf.chandef.chan->band == IEEE80211_BAND_5GHZ)
rx_status->rate_idx = (rate < 4) ? 0 : rate - 4;
else
rx_status->rate_idx = rate;
rx_status->freq = freq;
- rx_status->band = priv->hw->conf.channel->band;
+ rx_status->band = priv->hw->conf.chandef.chan->band;
rx_status->antenna = hdr->antenna;
tsf32 = le32_to_cpu(hdr->tsf32);
@@ -367,7 +368,11 @@ static int p54_rx_data(struct p54_common *priv, struct sk_buff *skb)
rx_status->mactime = ((u64)priv->tsf_high32) << 32 | tsf32;
priv->tsf_low32 = tsf32;
- rx_status->flag |= RX_FLAG_TSFT;
+ /* LMAC API Page 10/29 - s_lm_data_in - clock
+ * "usec accurate timestamp of hardware clock
+ * at end of frame (before OFDM SIFS EOF padding"
+ */
+ rx_status->flag |= RX_FLAG_MACTIME_END;
if (hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN))
header_len += hdr->align[0];
@@ -420,11 +425,11 @@ static void p54_rx_frame_sent(struct p54_common *priv, struct sk_buff *skb)
* Clear manually, ieee80211_tx_info_clear_status would
* clear the counts too and we need them.
*/
- memset(&info->status.ampdu_ack_len, 0,
+ memset(&info->status.ack_signal, 0,
sizeof(struct ieee80211_tx_info) -
- offsetof(struct ieee80211_tx_info, status.ampdu_ack_len));
+ offsetof(struct ieee80211_tx_info, status.ack_signal));
BUILD_BUG_ON(offsetof(struct ieee80211_tx_info,
- status.ampdu_ack_len) != 23);
+ status.ack_signal) != 20);
if (entry_hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN))
pad = entry_data->align[0];
@@ -444,7 +449,7 @@ static void p54_rx_frame_sent(struct p54_common *priv, struct sk_buff *skb)
}
if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
- (!payload->status))
+ !(payload->status & P54_TX_FAILED))
info->flags |= IEEE80211_TX_STAT_ACK;
if (payload->status & P54_TX_PSM_CANCELLED)
info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
@@ -507,6 +512,8 @@ static void p54_rx_stats(struct p54_common *priv, struct sk_buff *skb)
struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
struct p54_statistics *stats = (struct p54_statistics *) hdr->data;
struct sk_buff *tmp;
+ struct ieee80211_channel *chan;
+ unsigned int i, rssi, tx, cca, dtime, dtotal, dcca, dtx, drssi, unit;
u32 tsf32;
if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED))
@@ -523,8 +530,75 @@ static void p54_rx_stats(struct p54_common *priv, struct sk_buff *skb)
priv->noise = p54_rssi_to_dbm(priv, le32_to_cpu(stats->noise));
+ /*
+ * STSW450X LMAC API page 26 - 3.8 Statistics
+ * "The exact measurement period can be derived from the
+ * timestamp member".
+ */
+ dtime = tsf32 - priv->survey_raw.timestamp;
+
+ /*
+ * STSW450X LMAC API page 26 - 3.8.1 Noise histogram
+ * The LMAC samples RSSI, CCA and transmit state at regular
+ * periods (typically 8 times per 1k [as in 1024] usec).
+ */
+ cca = le32_to_cpu(stats->sample_cca);
+ tx = le32_to_cpu(stats->sample_tx);
+ rssi = 0;
+ for (i = 0; i < ARRAY_SIZE(stats->sample_noise); i++)
+ rssi += le32_to_cpu(stats->sample_noise[i]);
+
+ dcca = cca - priv->survey_raw.cached_cca;
+ drssi = rssi - priv->survey_raw.cached_rssi;
+ dtx = tx - priv->survey_raw.cached_tx;
+ dtotal = dcca + drssi + dtx;
+
+ /*
+ * update statistics when more than a second is over since the
+ * last call, or when a update is badly needed.
+ */
+ if (dtotal && (priv->update_stats || dtime >= USEC_PER_SEC) &&
+ dtime >= dtotal) {
+ priv->survey_raw.timestamp = tsf32;
+ priv->update_stats = false;
+ unit = dtime / dtotal;
+
+ if (dcca) {
+ priv->survey_raw.cca += dcca * unit;
+ priv->survey_raw.cached_cca = cca;
+ }
+ if (dtx) {
+ priv->survey_raw.tx += dtx * unit;
+ priv->survey_raw.cached_tx = tx;
+ }
+ if (drssi) {
+ priv->survey_raw.rssi += drssi * unit;
+ priv->survey_raw.cached_rssi = rssi;
+ }
+
+ /* 1024 usec / 8 times = 128 usec / time */
+ if (!(priv->phy_ps || priv->phy_idle))
+ priv->survey_raw.active += dtotal * unit;
+ else
+ priv->survey_raw.active += (dcca + dtx) * unit;
+ }
+
+ chan = priv->curchan;
+ if (chan) {
+ struct survey_info *survey = &priv->survey[chan->hw_value];
+ survey->noise = clamp(priv->noise, -128, 127);
+ survey->channel_time = priv->survey_raw.active;
+ survey->channel_time_tx = priv->survey_raw.tx;
+ survey->channel_time_busy = priv->survey_raw.tx +
+ priv->survey_raw.cca;
+ do_div(survey->channel_time, 1024);
+ do_div(survey->channel_time_tx, 1024);
+ do_div(survey->channel_time_busy, 1024);
+ }
+
tmp = p54_find_and_unlink_skb(priv, hdr->req_id);
dev_kfree_skb_any(tmp);
+ complete(&priv->stat_comp);
}
static void p54_rx_trap(struct p54_common *priv, struct sk_buff *skb)
@@ -538,8 +612,7 @@ static void p54_rx_trap(struct p54_common *priv, struct sk_buff *skb)
case P54_TRAP_BEACON_TX:
break;
case P54_TRAP_RADAR:
- printk(KERN_INFO "%s: radar (freq:%d MHz)\n",
- wiphy_name(priv->hw->wiphy), freq);
+ wiphy_info(priv->hw->wiphy, "radar (freq:%d MHz)\n", freq);
break;
case P54_TRAP_NO_BEACON:
if (priv->vif)
@@ -558,8 +631,8 @@ static void p54_rx_trap(struct p54_common *priv, struct sk_buff *skb)
wiphy_rfkill_set_hw_state(priv->hw->wiphy, false);
break;
default:
- printk(KERN_INFO "%s: received event:%x freq:%d\n",
- wiphy_name(priv->hw->wiphy), event, freq);
+ wiphy_info(priv->hw->wiphy, "received event:%x freq:%d\n",
+ event, freq);
break;
}
}
@@ -584,8 +657,9 @@ static int p54_rx_control(struct p54_common *priv, struct sk_buff *skb)
p54_rx_eeprom_readback(priv, skb);
break;
default:
- printk(KERN_DEBUG "%s: not handling 0x%02x type control frame\n",
- wiphy_name(priv->hw->wiphy), le16_to_cpu(hdr->type));
+ wiphy_debug(priv->hw->wiphy,
+ "not handling 0x%02x type control frame\n",
+ le16_to_cpu(hdr->type));
break;
}
return 0;
@@ -605,8 +679,9 @@ int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb)
EXPORT_SYMBOL_GPL(p54_rx);
static void p54_tx_80211_header(struct p54_common *priv, struct sk_buff *skb,
- struct ieee80211_tx_info *info, u8 *queue,
- u32 *extra_len, u16 *flags, u16 *aid,
+ struct ieee80211_tx_info *info,
+ struct ieee80211_sta *sta,
+ u8 *queue, u32 *extra_len, u16 *flags, u16 *aid,
bool *burst_possible)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
@@ -616,10 +691,10 @@ static void p54_tx_80211_header(struct p54_common *priv, struct sk_buff *skb,
else
*burst_possible = false;
- if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)
+ if (!(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ))
*flags |= P54_HDR_FLAG_DATA_OUT_SEQNR;
- if (info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE)
+ if (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)
*flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL;
if (info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT)
@@ -675,34 +750,37 @@ static void p54_tx_80211_header(struct p54_common *priv, struct sk_buff *skb,
}
}
- if (info->control.sta)
- *aid = info->control.sta->aid;
+ if (sta)
+ *aid = sta->aid;
break;
}
}
-static u8 p54_convert_algo(enum ieee80211_key_alg alg)
+static u8 p54_convert_algo(u32 cipher)
{
- switch (alg) {
- case ALG_WEP:
+ switch (cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
return P54_CRYPTO_WEP;
- case ALG_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
return P54_CRYPTO_TKIPMICHAEL;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
return P54_CRYPTO_AESCCMP;
default:
return 0;
}
}
-int p54_tx_80211(struct ieee80211_hw *dev, struct sk_buff *skb)
+void p54_tx_80211(struct ieee80211_hw *dev,
+ struct ieee80211_tx_control *control,
+ struct sk_buff *skb)
{
struct p54_common *priv = dev->priv;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct p54_tx_info *p54info;
struct p54_hdr *hdr;
struct p54_tx_data *txhdr;
- unsigned int padding, len, extra_len;
+ unsigned int padding, len, extra_len = 0;
int i, j, ridx;
u16 hdr_flags = 0, aid = 0;
u8 rate, queue = 0, crypt_offset = 0;
@@ -712,16 +790,12 @@ int p54_tx_80211(struct ieee80211_hw *dev, struct sk_buff *skb)
u8 nrates = 0, nremaining = 8;
bool burst_allowed = false;
- p54_tx_80211_header(priv, skb, info, &queue, &extra_len,
+ p54_tx_80211_header(priv, skb, info, control->sta, &queue, &extra_len,
&hdr_flags, &aid, &burst_allowed);
if (p54_tx_qos_accounting_alloc(priv, skb, queue)) {
- if (!IS_QOS_QUEUE(queue)) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- } else {
- return NETDEV_TX_BUSY;
- }
+ ieee80211_free_txskb(dev, skb);
+ return;
}
padding = (unsigned long)(skb->data - (sizeof(*hdr) + sizeof(*txhdr))) & 3;
@@ -729,7 +803,7 @@ int p54_tx_80211(struct ieee80211_hw *dev, struct sk_buff *skb)
if (info->control.hw_key) {
crypt_offset = ieee80211_get_hdrlen_from_skb(skb);
- if (info->control.hw_key->alg == ALG_TKIP) {
+ if (info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) {
u8 *iv = (u8 *)(skb->data + crypt_offset);
/*
* The firmware excepts that the IV has to have
@@ -825,10 +899,10 @@ int p54_tx_80211(struct ieee80211_hw *dev, struct sk_buff *skb)
hdr->tries = ridx;
txhdr->rts_rate_idx = 0;
if (info->control.hw_key) {
- txhdr->key_type = p54_convert_algo(info->control.hw_key->alg);
+ txhdr->key_type = p54_convert_algo(info->control.hw_key->cipher);
txhdr->key_len = min((u8)16, info->control.hw_key->keylen);
memcpy(txhdr->key, info->control.hw_key->key, txhdr->key_len);
- if (info->control.hw_key->alg == ALG_TKIP) {
+ if (info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) {
/* reserve space for the MIC key */
len += 8;
memcpy(skb_put(skb, 8), &(info->control.hw_key->key
@@ -846,8 +920,7 @@ int p54_tx_80211(struct ieee80211_hw *dev, struct sk_buff *skb)
txhdr->hw_queue = queue;
txhdr->backlog = priv->tx_stats[queue].len - 1;
memset(txhdr->durations, 0, sizeof(txhdr->durations));
- txhdr->tx_antenna = ((info->antenna_sel_tx == 0) ?
- 2 : info->antenna_sel_tx - 1) & priv->tx_diversity_mask;
+ txhdr->tx_antenna = 2 & priv->tx_diversity_mask;
if (priv->rxhw == 5) {
txhdr->longbow.cts_rate = cts_rate;
txhdr->longbow.output_power = cpu_to_le16(priv->output_power);
@@ -864,5 +937,4 @@ int p54_tx_80211(struct ieee80211_hw *dev, struct sk_buff *skb)
p54info->extra_len = extra_len;
p54_tx(priv, skb);
- return NETDEV_TX_OK;
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-13 16:28:41 +0000