diff options
Diffstat (limited to 'drivers/net/wireless/p54/p54usb.c')
| -rw-r--r-- | drivers/net/wireless/p54/p54usb.c | 251 |
1 files changed, 157 insertions, 94 deletions
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index d5bc21e5a02..043bd1c23c1 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -12,7 +12,6 @@ * published by the Free Software Foundation. */ -#include <linux/init.h> #include <linux/usb.h> #include <linux/pci.h> #include <linux/slab.h> @@ -20,6 +19,7 @@ #include <linux/etherdevice.h> #include <linux/delay.h> #include <linux/crc32.h> +#include <linux/module.h> #include <net/mac80211.h> #include "p54.h" @@ -41,10 +41,12 @@ MODULE_FIRMWARE("isl3887usb"); * whenever you add a new device. */ -static struct usb_device_id p54u_table[] __devinitdata = { +static struct usb_device_id p54u_table[] = { /* Version 1 devices (pci chip + net2280) */ + {USB_DEVICE(0x0411, 0x0050)}, /* Buffalo WLI2-USB2-G54 */ {USB_DEVICE(0x045e, 0x00c2)}, /* Microsoft MN-710 */ {USB_DEVICE(0x0506, 0x0a11)}, /* 3COM 3CRWE254G72 */ + {USB_DEVICE(0x0675, 0x0530)}, /* DrayTek Vigor 530 */ {USB_DEVICE(0x06b9, 0x0120)}, /* Thomson SpeedTouch 120g */ {USB_DEVICE(0x0707, 0xee06)}, /* SMC 2862W-G */ {USB_DEVICE(0x07aa, 0x001c)}, /* Corega CG-WLUSB2GT */ @@ -55,14 +57,20 @@ static struct usb_device_id p54u_table[] __devinitdata = { {USB_DEVICE(0x0846, 0x4210)}, /* Netgear WG121 the second ? */ {USB_DEVICE(0x0846, 0x4220)}, /* Netgear WG111 */ {USB_DEVICE(0x09aa, 0x1000)}, /* Spinnaker Proto board */ + {USB_DEVICE(0x0bf8, 0x1007)}, /* Fujitsu E-5400 USB */ {USB_DEVICE(0x0cde, 0x0006)}, /* Medion 40900, Roper Europe */ + {USB_DEVICE(0x0db0, 0x6826)}, /* MSI UB54G (MS-6826) */ {USB_DEVICE(0x107b, 0x55f2)}, /* Gateway WGU-210 (Gemtek) */ {USB_DEVICE(0x124a, 0x4023)}, /* Shuttle PN15, Airvast WM168g, IOGear GWU513 */ + {USB_DEVICE(0x1435, 0x0210)}, /* Inventel UR054G */ + {USB_DEVICE(0x15a9, 0x0002)}, /* Gemtek WUBI-100GW 802.11g */ {USB_DEVICE(0x1630, 0x0005)}, /* 2Wire 802.11g USB (v1) / Z-Com */ + {USB_DEVICE(0x182d, 0x096b)}, /* Sitecom WL-107 */ {USB_DEVICE(0x1915, 0x2234)}, /* Linksys WUSB54G OEM */ {USB_DEVICE(0x1915, 0x2235)}, /* Linksys WUSB54G Portable OEM */ {USB_DEVICE(0x2001, 0x3701)}, /* DLink DWL-G120 Spinnaker */ {USB_DEVICE(0x2001, 0x3703)}, /* DLink DWL-G122 */ + {USB_DEVICE(0x2001, 0x3762)}, /* Conceptronic C54U */ {USB_DEVICE(0x5041, 0x2234)}, /* Linksys WUSB54G */ {USB_DEVICE(0x5041, 0x2235)}, /* Linksys WUSB54G Portable */ @@ -74,7 +82,11 @@ static struct usb_device_id p54u_table[] __devinitdata = { {USB_DEVICE(0x06a9, 0x000e)}, /* Westell 802.11g USB (A90-211WG-01) */ {USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */ {USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */ + {USB_DEVICE(0x07aa, 0x0020)}, /* Corega WLUSB2GTST USB */ + {USB_DEVICE(0x0803, 0x4310)}, /* Zoom 4410a */ {USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */ + {USB_DEVICE(0x083a, 0x4531)}, /* T-Com Sinus 154 data II */ + {USB_DEVICE(0x083a, 0xc501)}, /* Zoom Wireless-G 4410 */ {USB_DEVICE(0x083a, 0xf503)}, /* Accton FD7050E ver 1010ec */ {USB_DEVICE(0x0846, 0x4240)}, /* Netgear WG111 (v2) */ {USB_DEVICE(0x0915, 0x2000)}, /* Cohiba Proto board */ @@ -92,8 +104,11 @@ static struct usb_device_id p54u_table[] __devinitdata = { {USB_DEVICE(0x13B1, 0x000C)}, /* Linksys WUSB54AG */ {USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */ {USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */ + /* {USB_DEVICE(0x15a9, 0x0002)}, * Also SparkLAN WL-682 with 3887 */ {USB_DEVICE(0x1668, 0x1050)}, /* Actiontec 802UIG-1 */ + {USB_DEVICE(0x1740, 0x1000)}, /* Senao NUB-350 */ {USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */ + {USB_DEVICE(0x2001, 0x3705)}, /* D-Link DWL-G120 rev C1 */ {USB_DEVICE(0x413c, 0x5513)}, /* Dell WLA3310 USB Wireless Adapter */ {USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */ {USB_DEVICE(0x413c, 0x8104)}, /* Cohiba Proto board */ @@ -106,21 +121,18 @@ static const struct { u32 intf; enum p54u_hw_type type; const char *fw; - const char *fw_legacy; char hw[20]; } p54u_fwlist[__NUM_P54U_HWTYPES] = { { .type = P54U_NET2280, .intf = FW_LM86, .fw = "isl3886usb", - .fw_legacy = "isl3890usb", .hw = "ISL3886 + net2280", }, { .type = P54U_3887, .intf = FW_LM87, .fw = "isl3887usb", - .fw_legacy = "isl3887usb_bare", .hw = "ISL3887", }, }; @@ -183,7 +195,7 @@ static void p54u_rx_cb(struct urb *urb) static void p54u_tx_cb(struct urb *urb) { struct sk_buff *skb = urb->context; - struct ieee80211_hw *dev = (struct ieee80211_hw *) + struct ieee80211_hw *dev = usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); p54_free_skb(dev, skb); @@ -197,6 +209,16 @@ static void p54u_free_urbs(struct ieee80211_hw *dev) usb_kill_anchored_urbs(&priv->submitted); } +static void p54u_stop(struct ieee80211_hw *dev) +{ + /* + * TODO: figure out how to reliably stop the 3887 and net2280 so + * the hardware is still usable next time we want to start it. + * until then, we just stop listening to the hardware.. + */ + p54u_free_urbs(dev); +} + static int p54u_init_urbs(struct ieee80211_hw *dev) { struct p54u_priv *priv = dev->priv; @@ -246,6 +268,16 @@ static int p54u_init_urbs(struct ieee80211_hw *dev) return ret; } +static int p54u_open(struct ieee80211_hw *dev) +{ + /* + * TODO: Because we don't know how to reliably stop the 3887 and + * the isl3886+net2280, other than brutally cut off all + * communications. We have to reinitialize the urbs on every start. + */ + return p54u_init_urbs(dev); +} + static __le32 p54u_lm87_chksum(const __le32 *data, size_t length) { u32 chk = 0; @@ -478,13 +510,10 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) return err; tmp = buf = kmalloc(P54U_FW_BLOCK, GFP_KERNEL); - if (!buf) { - dev_err(&priv->udev->dev, "(p54usb) cannot allocate firmware" - "upload buffer!\n"); + if (!buf) return -ENOMEM; - } - left = block_size = min((size_t)P54U_FW_BLOCK, priv->fw->size); + left = block_size = min_t(size_t, P54U_FW_BLOCK, priv->fw->size); strcpy(buf, p54u_firmware_upload_3887); left -= strlen(p54u_firmware_upload_3887); tmp += strlen(p54u_firmware_upload_3887); @@ -605,11 +634,8 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) const u8 *data; buf = kmalloc(512, GFP_KERNEL); - if (!buf) { - dev_err(&priv->udev->dev, "(p54usb) firmware buffer " - "alloc failed!\n"); + if (!buf) return -ENOMEM; - } #define P54U_WRITE(type, addr, data) \ do {\ @@ -825,73 +851,141 @@ fail: return err; } -static int p54u_load_firmware(struct ieee80211_hw *dev) +static int p54_find_type(struct p54u_priv *priv) { - struct p54u_priv *priv = dev->priv; - int err, i; - - BUILD_BUG_ON(ARRAY_SIZE(p54u_fwlist) != __NUM_P54U_HWTYPES); + int i; for (i = 0; i < __NUM_P54U_HWTYPES; i++) if (p54u_fwlist[i].type == priv->hw_type) break; - if (i == __NUM_P54U_HWTYPES) return -EOPNOTSUPP; - err = request_firmware(&priv->fw, p54u_fwlist[i].fw, &priv->udev->dev); - if (err) { - dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s " - "(%d)!\n", p54u_fwlist[i].fw, err); + return i; +} - err = request_firmware(&priv->fw, p54u_fwlist[i].fw_legacy, - &priv->udev->dev); - if (err) - return err; - } +static int p54u_start_ops(struct p54u_priv *priv) +{ + struct ieee80211_hw *dev = priv->common.hw; + int ret; - err = p54_parse_firmware(dev, priv->fw); - if (err) - goto out; + ret = p54_parse_firmware(dev, priv->fw); + if (ret) + goto err_out; + + ret = p54_find_type(priv); + if (ret < 0) + goto err_out; - if (priv->common.fw_interface != p54u_fwlist[i].intf) { + if (priv->common.fw_interface != p54u_fwlist[ret].intf) { dev_err(&priv->udev->dev, "wrong firmware, please get " "a firmware for \"%s\" and try again.\n", - p54u_fwlist[i].hw); - err = -EINVAL; + p54u_fwlist[ret].hw); + ret = -ENODEV; + goto err_out; } -out: - if (err) - release_firmware(priv->fw); + ret = priv->upload_fw(dev); + if (ret) + goto err_out; - return err; + ret = p54u_open(dev); + if (ret) + goto err_out; + + ret = p54_read_eeprom(dev); + if (ret) + goto err_stop; + + p54u_stop(dev); + + ret = p54_register_common(dev, &priv->udev->dev); + if (ret) + goto err_stop; + + return 0; + +err_stop: + p54u_stop(dev); + +err_out: + /* + * p54u_disconnect will do the rest of the + * cleanup + */ + return ret; } -static int p54u_open(struct ieee80211_hw *dev) +static void p54u_load_firmware_cb(const struct firmware *firmware, + void *context) { - struct p54u_priv *priv = dev->priv; + struct p54u_priv *priv = context; + struct usb_device *udev = priv->udev; int err; - err = p54u_init_urbs(dev); - if (err) { - return err; + complete(&priv->fw_wait_load); + if (firmware) { + priv->fw = firmware; + err = p54u_start_ops(priv); + } else { + err = -ENOENT; + dev_err(&udev->dev, "Firmware not found.\n"); } - priv->common.open = p54u_init_urbs; + if (err) { + struct device *parent = priv->udev->dev.parent; - return 0; + dev_err(&udev->dev, "failed to initialize device (%d)\n", err); + + if (parent) + device_lock(parent); + + device_release_driver(&udev->dev); + /* + * At this point p54u_disconnect has already freed + * the "priv" context. Do not use it anymore! + */ + priv = NULL; + + if (parent) + device_unlock(parent); + } + + usb_put_dev(udev); } -static void p54u_stop(struct ieee80211_hw *dev) +static int p54u_load_firmware(struct ieee80211_hw *dev, + struct usb_interface *intf) { - /* TODO: figure out how to reliably stop the 3887 and net2280 so - the hardware is still usable next time we want to start it. - until then, we just stop listening to the hardware.. */ - p54u_free_urbs(dev); + struct usb_device *udev = interface_to_usbdev(intf); + struct p54u_priv *priv = dev->priv; + struct device *device = &udev->dev; + int err, i; + + BUILD_BUG_ON(ARRAY_SIZE(p54u_fwlist) != __NUM_P54U_HWTYPES); + + init_completion(&priv->fw_wait_load); + i = p54_find_type(priv); + if (i < 0) + return i; + + dev_info(&priv->udev->dev, "Loading firmware file %s\n", + p54u_fwlist[i].fw); + + usb_get_dev(udev); + err = request_firmware_nowait(THIS_MODULE, 1, p54u_fwlist[i].fw, + device, GFP_KERNEL, priv, + p54u_load_firmware_cb); + if (err) { + dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s " + "(%d)!\n", p54u_fwlist[i].fw, err); + usb_put_dev(udev); + } + + return err; } -static int __devinit p54u_probe(struct usb_interface *intf, +static int p54u_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(intf); @@ -958,37 +1052,15 @@ static int __devinit p54u_probe(struct usb_interface *intf, priv->common.tx = p54u_tx_net2280; priv->upload_fw = p54u_upload_firmware_net2280; } - err = p54u_load_firmware(dev); - if (err) - goto err_free_dev; - - err = priv->upload_fw(dev); - if (err) - goto err_free_fw; - - p54u_open(dev); - err = p54_read_eeprom(dev); - p54u_stop(dev); - if (err) - goto err_free_fw; - - err = p54_register_common(dev, &udev->dev); - if (err) - goto err_free_fw; - - return 0; - -err_free_fw: - release_firmware(priv->fw); - -err_free_dev: - p54_free_common(dev); - usb_set_intfdata(intf, NULL); - usb_put_dev(udev); + err = p54u_load_firmware(dev, intf); + if (err) { + usb_put_dev(udev); + p54_free_common(dev); + } return err; } -static void __devexit p54u_disconnect(struct usb_interface *intf) +static void p54u_disconnect(struct usb_interface *intf) { struct ieee80211_hw *dev = usb_get_intfdata(intf); struct p54u_priv *priv; @@ -996,9 +1068,10 @@ static void __devexit p54u_disconnect(struct usb_interface *intf) if (!dev) return; + priv = dev->priv; + wait_for_completion(&priv->fw_wait_load); p54_unregister_common(dev); - priv = dev->priv; usb_put_dev(interface_to_usbdev(intf)); release_firmware(priv->fw); p54_free_common(dev); @@ -1070,17 +1143,7 @@ static struct usb_driver p54u_driver = { .reset_resume = p54u_resume, #endif /* CONFIG_PM */ .soft_unbind = 1, + .disable_hub_initiated_lpm = 1, }; -static int __init p54u_init(void) -{ - return usb_register(&p54u_driver); -} - -static void __exit p54u_exit(void) -{ - usb_deregister(&p54u_driver); -} - -module_init(p54u_init); -module_exit(p54u_exit); +module_usb_driver(p54u_driver); |