1 files changed, 52 insertions, 100 deletions

diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
index 72c7dbd39d0..de15171e2cd 100644
--- a/drivers/net/wireless/p54/p54spi.c
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -29,18 +29,20 @@
 #include <linux/spi/spi.h>
 #include <linux/etherdevice.h>
 #include <linux/gpio.h>
+#include <linux/slab.h>
 
 #include "p54spi.h"
-#include "p54spi_eeprom.h"
 #include "p54.h"
 
-#include "p54common.h"
+#include "lmac.h"
+
+#ifdef CONFIG_P54_SPI_DEFAULT_EEPROM
+#include "p54spi_eeprom.h"
+#endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */
 
 MODULE_FIRMWARE("3826.arm");
-MODULE_ALIAS("stlc45xx");
 
-/*
- * gpios should be handled in board files and provided via platform data,
+/* gpios should be handled in board files and provided via platform data,
  * but because it's currently impossible for p54spi to have a header file
  * in include/linux, let's use module paramaters for now
  */
@@ -111,15 +113,6 @@ static void p54spi_spi_write(struct p54s_priv *priv, u8 address,
 	spi_sync(priv->spi, &m);
 }
 
-static u16 p54spi_read16(struct p54s_priv *priv, u8 addr)
-{
-	__le16 val;
-
-	p54spi_spi_read(priv, addr, &val, sizeof(val));
-
-	return le16_to_cpu(val);
-}
-
 static u32 p54spi_read32(struct p54s_priv *priv, u8 addr)
 {
 	__le32 val;
@@ -139,37 +132,12 @@ static inline void p54spi_write32(struct p54s_priv *priv, u8 addr, __le32 val)
 	p54spi_spi_write(priv, addr, &val, sizeof(val));
 }
 
-struct p54spi_spi_reg {
-	u16 address;		/* __le16 ? */
-	u16 length;
-	char *name;
-};
-
-static const struct p54spi_spi_reg p54spi_registers_array[] =
-{
-	{ SPI_ADRS_ARM_INTERRUPTS,	32, "ARM_INT     " },
-	{ SPI_ADRS_ARM_INT_EN,		32, "ARM_INT_ENA " },
-	{ SPI_ADRS_HOST_INTERRUPTS,	32, "HOST_INT    " },
-	{ SPI_ADRS_HOST_INT_EN,		32, "HOST_INT_ENA" },
-	{ SPI_ADRS_HOST_INT_ACK,	32, "HOST_INT_ACK" },
-	{ SPI_ADRS_GEN_PURP_1,		32, "GP1_COMM    " },
-	{ SPI_ADRS_GEN_PURP_2,		32, "GP2_COMM    " },
-	{ SPI_ADRS_DEV_CTRL_STAT,	32, "DEV_CTRL_STA" },
-	{ SPI_ADRS_DMA_DATA,		16, "DMA_DATA    " },
-	{ SPI_ADRS_DMA_WRITE_CTRL,	16, "DMA_WR_CTRL " },
-	{ SPI_ADRS_DMA_WRITE_LEN,	16, "DMA_WR_LEN  " },
-	{ SPI_ADRS_DMA_WRITE_BASE,	32, "DMA_WR_BASE " },
-	{ SPI_ADRS_DMA_READ_CTRL,	16, "DMA_RD_CTRL " },
-	{ SPI_ADRS_DMA_READ_LEN,	16, "DMA_RD_LEN  " },
-	{ SPI_ADRS_DMA_WRITE_BASE,	32, "DMA_RD_BASE " }
-};
-
-static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, __le32 bits)
+static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, u32 bits)
 {
 	int i;
 
 	for (i = 0; i < 2000; i++) {
-		__le32 buffer = p54spi_read32(priv, reg);
+		u32 buffer = p54spi_read32(priv, reg);
 		if ((buffer & bits) == bits)
 			return 1;
 	}
@@ -179,8 +147,7 @@ static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, __le32 bits)
 static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base,
 				const void *buf, size_t len)
 {
-	if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL,
-			     cpu_to_le32(HOST_ALLOWED))) {
+	if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, HOST_ALLOWED)) {
 		dev_err(&priv->spi->dev, "spi_write_dma not allowed "
 			"to DMA write.\n");
 		return -EAGAIN;
@@ -223,15 +190,18 @@ static int p54spi_request_eeprom(struct ieee80211_hw *dev)
 	const struct firmware *eeprom;
 	int ret;
 
-	/*
-	 * allow users to customize their eeprom.
+	/* allow users to customize their eeprom.
 	 */
 
 	ret = request_firmware(&eeprom, "3826.eeprom", &priv->spi->dev);
 	if (ret < 0) {
+#ifdef CONFIG_P54_SPI_DEFAULT_EEPROM
 		dev_info(&priv->spi->dev, "loading default eeprom...\n");
 		ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom,
 				       sizeof(p54spi_eeprom));
+#else
+		dev_err(&priv->spi->dev, "Failed to request user eeprom\n");
+#endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */
 	} else {
 		dev_info(&priv->spi->dev, "loading user eeprom...\n");
 		ret = p54_parse_eeprom(dev, (void *) eeprom->data,
@@ -313,8 +283,7 @@ static void p54spi_power_on(struct p54s_priv *priv)
 	gpio_set_value(p54spi_gpio_power, 1);
 	enable_irq(gpio_to_irq(p54spi_gpio_irq));
 
-	/*
-	 * need to wait a while before device can be accessed, the lenght
+	/* need to wait a while before device can be accessed, the length
 	 * is just a guess
 	 */
 	msleep(10);
@@ -333,7 +302,7 @@ static int p54spi_wakeup(struct p54s_priv *priv)
 
 	/* And wait for the READY interrupt */
 	if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
-			     cpu_to_le32(SPI_HOST_INT_READY))) {
+			     SPI_HOST_INT_READY)) {
 		dev_err(&priv->spi->dev, "INT_READY timeout\n");
 		return -EBUSY;
 	}
@@ -393,7 +362,8 @@ static int p54spi_rx(struct p54s_priv *priv)
 	/* Firmware may insert up to 4 padding bytes after the lmac header,
 	 * but it does not amend the size of SPI data transfer.
 	 * Such packets has correct data size in header, thus referencing
-	 * past the end of allocated skb. Reserve extra 4 bytes for this case */
+	 * past the end of allocated skb. Reserve extra 4 bytes for this case
+	 */
 	skb = dev_alloc_skb(len + 4);
 	if (!skb) {
 		p54spi_sleep(priv);
@@ -411,7 +381,8 @@ static int p54spi_rx(struct p54s_priv *priv)
 	}
 	p54spi_sleep(priv);
 	/* Put additional bytes to compensate for the possible
-	 * alignment-caused truncation */
+	 * alignment-caused truncation
+	 */
 	skb_put(skb, 4);
 
 	if (p54_rx(priv->hw, skb) == 0)
@@ -424,9 +395,9 @@ static int p54spi_rx(struct p54s_priv *priv)
 static irqreturn_t p54spi_interrupt(int irq, void *config)
 {
 	struct spi_device *spi = config;
-	struct p54s_priv *priv = dev_get_drvdata(&spi->dev);
+	struct p54s_priv *priv = spi_get_drvdata(spi);
 
-	queue_work(priv->hw->workqueue, &priv->work);
+	ieee80211_queue_work(priv->hw, &priv->work);
 
 	return IRQ_HANDLED;
 }
@@ -444,7 +415,7 @@ static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb)
 		goto out;
 
 	if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
-			     cpu_to_le32(SPI_HOST_INT_WR_READY))) {
+			     SPI_HOST_INT_WR_READY)) {
 		dev_err(&priv->spi->dev, "WR_READY timeout\n");
 		ret = -EAGAIN;
 		goto out;
@@ -514,7 +485,7 @@ static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	list_add_tail(&di->tx_list, &priv->tx_pending);
 	spin_unlock_irqrestore(&priv->tx_lock, flags);
 
-	queue_work(priv->hw->workqueue, &priv->work);
+	ieee80211_queue_work(priv->hw, &priv->work);
 }
 
 static void p54spi_work(struct work_struct *work)
@@ -609,15 +580,9 @@ static void p54spi_op_stop(struct ieee80211_hw *dev)
 	struct p54s_priv *priv = dev->priv;
 	unsigned long flags;
 
-	if (mutex_lock_interruptible(&priv->mutex)) {
-		/* FIXME: how to handle this error? */
-		return;
-	}
-
+	mutex_lock(&priv->mutex);
 	WARN_ON(priv->fw_state != FW_STATE_READY);
 
-	cancel_work_sync(&priv->work);
-
 	p54spi_power_off(priv);
 	spin_lock_irqsave(&priv->tx_lock, flags);
 	INIT_LIST_HEAD(&priv->tx_pending);
@@ -625,9 +590,11 @@ static void p54spi_op_stop(struct ieee80211_hw *dev)
 
 	priv->fw_state = FW_STATE_OFF;
 	mutex_unlock(&priv->mutex);
+
+	cancel_work_sync(&priv->work);
 }
 
-static int __devinit p54spi_probe(struct spi_device *spi)
+static int p54spi_probe(struct spi_device *spi)
 {
 	struct p54s_priv *priv = NULL;
 	struct ieee80211_hw *hw;
@@ -641,7 +608,7 @@ static int __devinit p54spi_probe(struct spi_device *spi)
 
 	priv = hw->priv;
 	priv->hw = hw;
-	dev_set_drvdata(&spi->dev, priv);
+	spi_set_drvdata(spi, priv);
 	priv->spi = spi;
 
 	spi->bits_per_word = 16;
@@ -650,34 +617,33 @@ static int __devinit p54spi_probe(struct spi_device *spi)
 	ret = spi_setup(spi);
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "spi_setup failed");
-		goto err_free_common;
+		goto err_free;
 	}
 
 	ret = gpio_request(p54spi_gpio_power, "p54spi power");
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
-		goto err_free_common;
+		goto err_free;
 	}
 
 	ret = gpio_request(p54spi_gpio_irq, "p54spi irq");
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
-		goto err_free_common;
+		goto err_free_gpio_power;
 	}
 
 	gpio_direction_output(p54spi_gpio_power, 0);
 	gpio_direction_input(p54spi_gpio_irq);
 
 	ret = request_irq(gpio_to_irq(p54spi_gpio_irq),
-			  p54spi_interrupt, IRQF_DISABLED, "p54spi",
+			  p54spi_interrupt, 0, "p54spi",
 			  priv->spi);
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "request_irq() failed");
-		goto err_free_common;
+		goto err_free_gpio_irq;
 	}
 
-	set_irq_type(gpio_to_irq(p54spi_gpio_irq),
-		     IRQ_TYPE_EDGE_RISING);
+	irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING);
 
 	disable_irq(gpio_to_irq(p54spi_gpio_irq));
 
@@ -685,6 +651,7 @@ static int __devinit p54spi_probe(struct spi_device *spi)
 	init_completion(&priv->fw_comp);
 	INIT_LIST_HEAD(&priv->tx_pending);
 	mutex_init(&priv->mutex);
+	spin_lock_init(&priv->tx_lock);
 	SET_IEEE80211_DEV(hw, &spi->dev);
 	priv->common.open = p54spi_op_start;
 	priv->common.stop = p54spi_op_stop;
@@ -705,15 +672,21 @@ static int __devinit p54spi_probe(struct spi_device *spi)
 	return 0;
 
 err_free_common:
+	free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
+err_free_gpio_irq:
+	gpio_free(p54spi_gpio_irq);
+err_free_gpio_power:
+	gpio_free(p54spi_gpio_power);
+err_free:
 	p54_free_common(priv->hw);
 	return ret;
 }
 
-static int __devexit p54spi_remove(struct spi_device *spi)
+static int p54spi_remove(struct spi_device *spi)
 {
-	struct p54s_priv *priv = dev_get_drvdata(&spi->dev);
+	struct p54s_priv *priv = spi_get_drvdata(spi);
 
-	ieee80211_unregister_hw(priv->hw);
+	p54_unregister_common(priv->hw);
 
 	free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
 
@@ -724,7 +697,6 @@ static int __devexit p54spi_remove(struct spi_device *spi)
 	mutex_destroy(&priv->mutex);
 
 	p54_free_common(priv->hw);
-	ieee80211_free_hw(priv->hw);
 
 	return 0;
 }
@@ -732,38 +704,18 @@ static int __devexit p54spi_remove(struct spi_device *spi)
 
 static struct spi_driver p54spi_driver = {
 	.driver = {
-		/* use cx3110x name because board-n800.c uses that for the
-		 * SPI port */
-		.name		= "cx3110x",
-		.bus		= &spi_bus_type,
+		.name		= "p54spi",
 		.owner		= THIS_MODULE,
 	},
 
 	.probe		= p54spi_probe,
-	.remove		= __devexit_p(p54spi_remove),
+	.remove		= p54spi_remove,
 };
 
-static int __init p54spi_init(void)
-{
-	int ret;
-
-	ret = spi_register_driver(&p54spi_driver);
-	if (ret < 0) {
-		printk(KERN_ERR "failed to register SPI driver: %d", ret);
-		goto out;
-	}
-
-out:
-	return ret;
-}
-
-static void __exit p54spi_exit(void)
-{
-	spi_unregister_driver(&p54spi_driver);
-}
-
-module_init(p54spi_init);
-module_exit(p54spi_exit);
+module_spi_driver(p54spi_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>");
+MODULE_ALIAS("spi:cx3110x");
+MODULE_ALIAS("spi:p54spi");
+MODULE_ALIAS("spi:stlc45xx");