diff options
Diffstat (limited to 'drivers/net/wireless/orinoco')
31 files changed, 9259 insertions, 7548 deletions
diff --git a/drivers/net/wireless/orinoco/Kconfig b/drivers/net/wireless/orinoco/Kconfig new file mode 100644 index 00000000000..60819bcf437 --- /dev/null +++ b/drivers/net/wireless/orinoco/Kconfig @@ -0,0 +1,141 @@ +config HERMES + tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" + depends on (PPC_PMAC || PCI || PCMCIA) + depends on CFG80211 && CFG80211_WEXT + select WIRELESS_EXT + select WEXT_SPY + select WEXT_PRIV + select FW_LOADER + select CRYPTO + select CRYPTO_MICHAEL_MIC + ---help--- + A driver for 802.11b wireless cards based on the "Hermes" or + Intersil HFA384x (Prism 2) MAC controller. This includes the vast + majority of the PCMCIA 802.11b cards (which are nearly all rebadges) + - except for the Cisco/Aironet cards. Cards supported include the + Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, + Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, + IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear + MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel + IPW2011, and Symbol Spectrum24 High Rate amongst others. + + This option includes the guts of the driver, but in order to + actually use a card you will also need to enable support for PCMCIA + Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below. + + You will also very likely also need the Wireless Tools in order to + configure your card and that /etc/pcmcia/wireless.opts works : + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html> + +config HERMES_PRISM + bool "Support Prism 2/2.5 chipset" + depends on HERMES + ---help--- + + Say Y to enable support for Prism 2 and 2.5 chipsets. These + chipsets are better handled by the hostap driver. This driver + would not support WPA or firmware download for Prism chipset. + + If you are not sure, say N. + +config HERMES_CACHE_FW_ON_INIT + bool "Cache Hermes firmware on driver initialisation" + depends on HERMES + default y + ---help--- + Say Y to cache any firmware required by the Hermes drivers + on startup. The firmware will remain cached until the + driver is unloaded. The cache uses 64K of RAM. + + Otherwise load the firmware from userspace as required. In + this case the driver should be unloaded and restarted + whenever the firmware is changed. + + If you are not sure, say Y. + +config APPLE_AIRPORT + tristate "Apple Airport support (built-in)" + depends on PPC_PMAC && HERMES + help + Say Y here to support the Airport 802.11b wireless Ethernet hardware + built into the Macintosh iBook and other recent PowerPC-based + Macintosh machines. This is essentially a Lucent Orinoco card with + a non-standard interface. + + This driver does not support the Airport Extreme (802.11b/g). Use + the BCM43xx driver for Airport Extreme cards. + +config PLX_HERMES + tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)" + depends on PCI && HERMES + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in PLX9052 based PCI adaptors. These + adaptors are not a full PCMCIA controller but act as a more limited + PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that + 802.11b PCMCIA cards can be used in desktop machines. The Netgear + MA301 is such an adaptor. + +config TMD_HERMES + tristate "Hermes in TMD7160 based PCI adaptor support" + depends on PCI && HERMES + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in TMD7160 based PCI adaptors. These + adaptors are not a full PCMCIA controller but act as a more limited + PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that + 802.11b PCMCIA cards can be used in desktop machines. + +config NORTEL_HERMES + tristate "Nortel emobility PCI adaptor support" + depends on PCI && HERMES + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in Nortel emobility PCI adaptors. These + adaptors are not full PCMCIA controllers, but act as a more limited + PCI <-> PCMCIA bridge. + +config PCI_HERMES + tristate "Prism 2.5 PCI 802.11b adaptor support" + depends on PCI && HERMES && HERMES_PRISM + help + Enable support for PCI and mini-PCI 802.11b wireless NICs based on + the Prism 2.5 chipset. These are true PCI cards, not the 802.11b + PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also + common. Some of the built-in wireless adaptors in laptops are of + this variety. + +config PCMCIA_HERMES + tristate "Hermes PCMCIA card support" + depends on PCMCIA && HERMES + ---help--- + A driver for "Hermes" chipset based PCMCIA wireless adaptors, such + as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ + EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and + others). It should also be usable on various Prism II based cards + such as the Linksys, D-Link and Farallon Skyline. It should also + work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN. + + You will very likely need the Wireless Tools in order to + configure your card and that /etc/pcmcia/wireless.opts works: + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + +config PCMCIA_SPECTRUM + tristate "Symbol Spectrum24 Trilogy PCMCIA card support" + depends on PCMCIA && HERMES + ---help--- + + This is a driver for 802.11b cards using RAM-loadable Symbol + firmware, such as Symbol Wireless Networker LA4100, CompactFlash + cards by Socket Communications and Intel PRO/Wireless 2011B. + + This driver requires firmware download on startup. Utilities + for downloading Symbol firmware are available at + <http://sourceforge.net/projects/orinoco/> + +config ORINOCO_USB + tristate "Agere Orinoco USB support" + depends on USB && HERMES + select FW_LOADER + ---help--- + This driver is for USB versions of the Agere Orinoco card. diff --git a/drivers/net/wireless/orinoco/Makefile b/drivers/net/wireless/orinoco/Makefile index 791366e08c5..bfdefb85abc 100644 --- a/drivers/net/wireless/orinoco/Makefile +++ b/drivers/net/wireless/orinoco/Makefile @@ -1,8 +1,9 @@ # # Makefile for the orinoco wireless device drivers. # +orinoco-objs := main.o fw.o hw.o mic.o scan.o wext.o hermes_dld.o hermes.o cfg.o -obj-$(CONFIG_HERMES) += orinoco.o hermes.o hermes_dld.o +obj-$(CONFIG_HERMES) += orinoco.o obj-$(CONFIG_PCMCIA_HERMES) += orinoco_cs.o obj-$(CONFIG_APPLE_AIRPORT) += airport.o obj-$(CONFIG_PLX_HERMES) += orinoco_plx.o @@ -10,3 +11,7 @@ obj-$(CONFIG_PCI_HERMES) += orinoco_pci.o obj-$(CONFIG_TMD_HERMES) += orinoco_tmd.o obj-$(CONFIG_NORTEL_HERMES) += orinoco_nortel.o obj-$(CONFIG_PCMCIA_SPECTRUM) += spectrum_cs.o +obj-$(CONFIG_ORINOCO_USB) += orinoco_usb.o + +# Orinoco should be endian clean. +ccflags-y += -D__CHECK_ENDIAN__ diff --git a/drivers/net/wireless/orinoco/airport.c b/drivers/net/wireless/orinoco/airport.c index 28f1cae4843..0ca8b1455cd 100644 --- a/drivers/net/wireless/orinoco/airport.c +++ b/drivers/net/wireless/orinoco/airport.c @@ -3,10 +3,10 @@ * A driver for "Hermes" chipset based Apple Airport wireless * card. * - * Copyright notice & release notes in file orinoco.c - * + * Copyright notice & release notes in file main.c + * * Note specific to airport stub: - * + * * 0.05 : first version of the new split driver * 0.06 : fix possible hang on powerup, add sleep support */ @@ -27,6 +27,7 @@ struct airport { struct macio_dev *mdev; void __iomem *vaddr; + unsigned int irq; int irq_requested; int ndev_registered; }; @@ -34,8 +35,9 @@ struct airport { static int airport_suspend(struct macio_dev *mdev, pm_message_t state) { - struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev); - struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev); + struct net_device *dev = priv->ndev; + struct airport *card = priv->card; unsigned long flags; int err; @@ -48,19 +50,12 @@ airport_suspend(struct macio_dev *mdev, pm_message_t state) return 0; } - err = __orinoco_down(dev); - if (err) - printk(KERN_WARNING "%s: PBOOK_SLEEP_NOW: Error %d downing interface\n", - dev->name, err); - - netif_device_detach(dev); - - priv->hw_unavailable++; - + orinoco_down(priv); orinoco_unlock(priv, &flags); - disable_irq(dev->irq); - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0); + disable_irq(card->irq); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(mdev), 0, 0); return 0; } @@ -68,57 +63,39 @@ airport_suspend(struct macio_dev *mdev, pm_message_t state) static int airport_resume(struct macio_dev *mdev) { - struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev); - struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev); + struct net_device *dev = priv->ndev; + struct airport *card = priv->card; unsigned long flags; int err; printk(KERN_DEBUG "%s: Airport waking up\n", dev->name); - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(mdev), 0, 1); msleep(200); - enable_irq(dev->irq); - - err = orinoco_reinit_firmware(dev); - if (err) { - printk(KERN_ERR "%s: Error %d re-initializing firmware on PBOOK_WAKE\n", - dev->name, err); - return 0; - } - - spin_lock_irqsave(&priv->lock, flags); - - netif_device_attach(dev); + enable_irq(card->irq); - priv->hw_unavailable--; + priv->hw.ops->lock_irqsave(&priv->lock, &flags); + err = orinoco_up(priv); + priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); - if (priv->open && (! priv->hw_unavailable)) { - err = __orinoco_up(dev); - if (err) - printk(KERN_ERR "%s: Error %d restarting card on PBOOK_WAKE\n", - dev->name, err); - } - - - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; + return err; } static int airport_detach(struct macio_dev *mdev) { - struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev); - struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev); struct airport *card = priv->card; if (card->ndev_registered) - unregister_netdev(dev); + orinoco_if_del(priv); card->ndev_registered = 0; if (card->irq_requested) - free_irq(dev->irq, dev); + free_irq(card->irq, priv); card->irq_requested = 0; if (card->vaddr) @@ -127,11 +104,12 @@ airport_detach(struct macio_dev *mdev) macio_release_resource(mdev, 0); - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(mdev), 0, 0); ssleep(1); macio_set_drvdata(mdev, NULL); - free_orinocodev(dev); + free_orinocodev(priv); return 0; } @@ -143,7 +121,6 @@ static int airport_hard_reset(struct orinoco_private *priv) * re-initialize properly, it falls in a screaming heap * shortly afterwards. */ #if 0 - struct net_device *dev = priv->ndev; struct airport *card = priv->card; /* Vitally important. If we don't do this it seems we get an @@ -151,14 +128,16 @@ static int airport_hard_reset(struct orinoco_private *priv) * hw_unavailable is already set it doesn't get ACKed, we get * into an interrupt loop and the PMU decides to turn us * off. */ - disable_irq(dev->irq); + disable_irq(card->irq); - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 0); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(card->mdev), 0, 0); ssleep(1); - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 1); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(card->mdev), 0, 1); ssleep(1); - enable_irq(dev->irq); + enable_irq(card->irq); ssleep(1); #endif @@ -169,10 +148,9 @@ static int airport_attach(struct macio_dev *mdev, const struct of_device_id *match) { struct orinoco_private *priv; - struct net_device *dev; struct airport *card; unsigned long phys_addr; - hermes_t *hw; + struct hermes *hw; if (macio_resource_count(mdev) < 1 || macio_irq_count(mdev) < 1) { printk(KERN_ERR PFX "Wrong interrupt/addresses in OF tree\n"); @@ -180,33 +158,29 @@ airport_attach(struct macio_dev *mdev, const struct of_device_id *match) } /* Allocate space for private device-specific data */ - dev = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev, - airport_hard_reset, NULL); - if (! dev) { + priv = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev, + airport_hard_reset, NULL); + if (!priv) { printk(KERN_ERR PFX "Cannot allocate network device\n"); return -ENODEV; } - priv = netdev_priv(dev); card = priv->card; hw = &priv->hw; card->mdev = mdev; - if (macio_request_resource(mdev, 0, "airport")) { + if (macio_request_resource(mdev, 0, DRIVER_NAME)) { printk(KERN_ERR PFX "can't request IO resource !\n"); - free_orinocodev(dev); + free_orinocodev(priv); return -EBUSY; } - SET_NETDEV_DEV(dev, &mdev->ofdev.dev); - - macio_set_drvdata(mdev, dev); + macio_set_drvdata(mdev, priv); /* Setup interrupts & base address */ - dev->irq = macio_irq(mdev, 0); + card->irq = macio_irq(mdev, 0); phys_addr = macio_resource_start(mdev, 0); /* Physical address */ printk(KERN_DEBUG PFX "Physical address %lx\n", phys_addr); - dev->base_addr = phys_addr; card->vaddr = ioremap(phys_addr, AIRPORT_IO_LEN); if (!card->vaddr) { printk(KERN_ERR PFX "ioremap() failed\n"); @@ -214,26 +188,32 @@ airport_attach(struct macio_dev *mdev, const struct of_device_id *match) } hermes_struct_init(hw, card->vaddr, HERMES_16BIT_REGSPACING); - + /* Power up card */ - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(mdev), 0, 1); ssleep(1); /* Reset it before we get the interrupt */ - hermes_init(hw); + hw->ops->init(hw); - if (request_irq(dev->irq, orinoco_interrupt, 0, dev->name, dev)) { - printk(KERN_ERR PFX "Couldn't get IRQ %d\n", dev->irq); + if (request_irq(card->irq, orinoco_interrupt, 0, DRIVER_NAME, priv)) { + printk(KERN_ERR PFX "Couldn't get IRQ %d\n", card->irq); goto failed; } card->irq_requested = 1; - /* Tell the stack we exist */ - if (register_netdev(dev) != 0) { - printk(KERN_ERR PFX "register_netdev() failed\n"); + /* Initialise the main driver */ + if (orinoco_init(priv) != 0) { + printk(KERN_ERR PFX "orinoco_init() failed\n"); + goto failed; + } + + /* Register an interface with the stack */ + if (orinoco_if_add(priv, phys_addr, card->irq, NULL) != 0) { + printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto failed; } - printk(KERN_DEBUG PFX "Card registered for interface %s\n", dev->name); card->ndev_registered = 1; return 0; failed: @@ -248,20 +228,21 @@ MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); MODULE_DESCRIPTION("Driver for the Apple Airport wireless card."); MODULE_LICENSE("Dual MPL/GPL"); -static struct of_device_id airport_match[] = -{ +static struct of_device_id airport_match[] = { { - .name = "radio", + .name = "radio", }, {}, }; -MODULE_DEVICE_TABLE (of, airport_match); +MODULE_DEVICE_TABLE(of, airport_match); -static struct macio_driver airport_driver = -{ - .name = DRIVER_NAME, - .match_table = airport_match, +static struct macio_driver airport_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = airport_match, + }, .probe = airport_attach, .remove = airport_detach, .suspend = airport_suspend, diff --git a/drivers/net/wireless/orinoco/cfg.c b/drivers/net/wireless/orinoco/cfg.c new file mode 100644 index 00000000000..a9e94b6db5b --- /dev/null +++ b/drivers/net/wireless/orinoco/cfg.c @@ -0,0 +1,291 @@ +/* cfg80211 support + * + * See copyright notice in main.c + */ +#include <linux/ieee80211.h> +#include <net/cfg80211.h> +#include "hw.h" +#include "main.h" +#include "orinoco.h" + +#include "cfg.h" + +/* Supported bitrates. Must agree with hw.c */ +static struct ieee80211_rate orinoco_rates[] = { + { .bitrate = 10 }, + { .bitrate = 20 }, + { .bitrate = 55 }, + { .bitrate = 110 }, +}; + +static const void * const orinoco_wiphy_privid = &orinoco_wiphy_privid; + +/* Called after orinoco_private is allocated. */ +void orinoco_wiphy_init(struct wiphy *wiphy) +{ + struct orinoco_private *priv = wiphy_priv(wiphy); + + wiphy->privid = orinoco_wiphy_privid; + + set_wiphy_dev(wiphy, priv->dev); +} + +/* Called after firmware is initialised */ +int orinoco_wiphy_register(struct wiphy *wiphy) +{ + struct orinoco_private *priv = wiphy_priv(wiphy); + int i, channels = 0; + + if (priv->firmware_type == FIRMWARE_TYPE_AGERE) + wiphy->max_scan_ssids = 1; + else + wiphy->max_scan_ssids = 0; + + wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + + /* TODO: should we set if we only have demo ad-hoc? + * (priv->has_port3) + */ + if (priv->has_ibss) + wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC); + + if (!priv->broken_monitor || force_monitor) + wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); + + priv->band.bitrates = orinoco_rates; + priv->band.n_bitrates = ARRAY_SIZE(orinoco_rates); + + /* Only support channels allowed by the card EEPROM */ + for (i = 0; i < NUM_CHANNELS; i++) { + if (priv->channel_mask & (1 << i)) { + priv->channels[i].center_freq = + ieee80211_channel_to_frequency(i + 1, + IEEE80211_BAND_2GHZ); + channels++; + } + } + priv->band.channels = priv->channels; + priv->band.n_channels = channels; + + wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band; + wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; + + i = 0; + if (priv->has_wep) { + priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP40; + i++; + + if (priv->has_big_wep) { + priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP104; + i++; + } + } + if (priv->has_wpa) { + priv->cipher_suites[i] = WLAN_CIPHER_SUITE_TKIP; + i++; + } + wiphy->cipher_suites = priv->cipher_suites; + wiphy->n_cipher_suites = i; + + wiphy->rts_threshold = priv->rts_thresh; + if (!priv->has_mwo) + wiphy->frag_threshold = priv->frag_thresh + 1; + wiphy->retry_short = priv->short_retry_limit; + wiphy->retry_long = priv->long_retry_limit; + + return wiphy_register(wiphy); +} + +static int orinoco_change_vif(struct wiphy *wiphy, struct net_device *dev, + enum nl80211_iftype type, u32 *flags, + struct vif_params *params) +{ + struct orinoco_private *priv = wiphy_priv(wiphy); + int err = 0; + unsigned long lock; + + if (orinoco_lock(priv, &lock) != 0) + return -EBUSY; + + switch (type) { + case NL80211_IFTYPE_ADHOC: + if (!priv->has_ibss && !priv->has_port3) + err = -EINVAL; + break; + + case NL80211_IFTYPE_STATION: + break; + + case NL80211_IFTYPE_MONITOR: + if (priv->broken_monitor && !force_monitor) { + wiphy_warn(wiphy, + "Monitor mode support is buggy in this firmware, not enabling\n"); + err = -EINVAL; + } + break; + + default: + err = -EINVAL; + } + + if (!err) { + priv->iw_mode = type; + set_port_type(priv); + err = orinoco_commit(priv); + } + + orinoco_unlock(priv, &lock); + + return err; +} + +static int orinoco_scan(struct wiphy *wiphy, + struct cfg80211_scan_request *request) +{ + struct orinoco_private *priv = wiphy_priv(wiphy); + int err; + + if (!request) + return -EINVAL; + + if (priv->scan_request && priv->scan_request != request) + return -EBUSY; + + priv->scan_request = request; + + err = orinoco_hw_trigger_scan(priv, request->ssids); + /* On error the we aren't processing the request */ + if (err) + priv->scan_request = NULL; + + return err; +} + +static int orinoco_set_monitor_channel(struct wiphy *wiphy, + struct cfg80211_chan_def *chandef) +{ + struct orinoco_private *priv = wiphy_priv(wiphy); + int err = 0; + unsigned long flags; + int channel; + + if (!chandef->chan) + return -EINVAL; + + if (cfg80211_get_chandef_type(chandef) != NL80211_CHAN_NO_HT) + return -EINVAL; + + if (chandef->chan->band != IEEE80211_BAND_2GHZ) + return -EINVAL; + + channel = ieee80211_frequency_to_channel(chandef->chan->center_freq); + + if ((channel < 1) || (channel > NUM_CHANNELS) || + !(priv->channel_mask & (1 << (channel - 1)))) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + priv->channel = channel; + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { + /* Fast channel change - no commit if successful */ + struct hermes *hw = &priv->hw; + err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | + HERMES_TEST_SET_CHANNEL, + channel, NULL); + } + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_set_wiphy_params(struct wiphy *wiphy, u32 changed) +{ + struct orinoco_private *priv = wiphy_priv(wiphy); + int frag_value = -1; + int rts_value = -1; + int err = 0; + + if (changed & WIPHY_PARAM_RETRY_SHORT) { + /* Setting short retry not supported */ + err = -EINVAL; + } + + if (changed & WIPHY_PARAM_RETRY_LONG) { + /* Setting long retry not supported */ + err = -EINVAL; + } + + if (changed & WIPHY_PARAM_FRAG_THRESHOLD) { + /* Set fragmentation */ + if (priv->has_mwo) { + if (wiphy->frag_threshold < 0) + frag_value = 0; + else { + printk(KERN_WARNING "%s: Fixed fragmentation " + "is not supported on this firmware. " + "Using MWO robust instead.\n", + priv->ndev->name); + frag_value = 1; + } + } else { + if (wiphy->frag_threshold < 0) + frag_value = 2346; + else if ((wiphy->frag_threshold < 257) || + (wiphy->frag_threshold > 2347)) + err = -EINVAL; + else + /* cfg80211 value is 257-2347 (odd only) + * orinoco rid has range 256-2346 (even only) */ + frag_value = wiphy->frag_threshold & ~0x1; + } + } + + if (changed & WIPHY_PARAM_RTS_THRESHOLD) { + /* Set RTS. + * + * Prism documentation suggests default of 2432, + * and a range of 0-3000. + * + * Current implementation uses 2347 as the default and + * the upper limit. + */ + + if (wiphy->rts_threshold < 0) + rts_value = 2347; + else if (wiphy->rts_threshold > 2347) + err = -EINVAL; + else + rts_value = wiphy->rts_threshold; + } + + if (!err) { + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (frag_value >= 0) { + if (priv->has_mwo) + priv->mwo_robust = frag_value; + else + priv->frag_thresh = frag_value; + } + if (rts_value >= 0) + priv->rts_thresh = rts_value; + + err = orinoco_commit(priv); + + orinoco_unlock(priv, &flags); + } + + return err; +} + +const struct cfg80211_ops orinoco_cfg_ops = { + .change_virtual_intf = orinoco_change_vif, + .set_monitor_channel = orinoco_set_monitor_channel, + .scan = orinoco_scan, + .set_wiphy_params = orinoco_set_wiphy_params, +}; diff --git a/drivers/net/wireless/orinoco/cfg.h b/drivers/net/wireless/orinoco/cfg.h new file mode 100644 index 00000000000..3ddc96a06cd --- /dev/null +++ b/drivers/net/wireless/orinoco/cfg.h @@ -0,0 +1,15 @@ +/* cfg80211 support. + * + * See copyright notice in main.c + */ +#ifndef ORINOCO_CFG_H +#define ORINOCO_CFG_H + +#include <net/cfg80211.h> + +extern const struct cfg80211_ops orinoco_cfg_ops; + +void orinoco_wiphy_init(struct wiphy *wiphy); +int orinoco_wiphy_register(struct wiphy *wiphy); + +#endif /* ORINOCO_CFG_H */ diff --git a/drivers/net/wireless/orinoco/fw.c b/drivers/net/wireless/orinoco/fw.c new file mode 100644 index 00000000000..400a3521764 --- /dev/null +++ b/drivers/net/wireless/orinoco/fw.c @@ -0,0 +1,387 @@ +/* Firmware file reading and download helpers + * + * See copyright notice in main.c + */ +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/firmware.h> +#include <linux/device.h> +#include <linux/module.h> + +#include "hermes.h" +#include "hermes_dld.h" +#include "orinoco.h" + +#include "fw.h" + +/* End markers (for Symbol firmware only) */ +#define TEXT_END 0x1A /* End of text header */ + +struct fw_info { + char *pri_fw; + char *sta_fw; + char *ap_fw; + u32 pda_addr; + u16 pda_size; +}; + +static const struct fw_info orinoco_fw[] = { + { NULL, "agere_sta_fw.bin", "agere_ap_fw.bin", 0x00390000, 1000 }, + { NULL, "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 }, + { "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", NULL, 0x00003100, 512 } +}; +MODULE_FIRMWARE("agere_sta_fw.bin"); +MODULE_FIRMWARE("agere_ap_fw.bin"); +MODULE_FIRMWARE("prism_sta_fw.bin"); +MODULE_FIRMWARE("prism_ap_fw.bin"); +MODULE_FIRMWARE("symbol_sp24t_prim_fw"); +MODULE_FIRMWARE("symbol_sp24t_sec_fw"); + +/* Structure used to access fields in FW + * Make sure LE decoding macros are used + */ +struct orinoco_fw_header { + char hdr_vers[6]; /* ASCII string for header version */ + __le16 headersize; /* Total length of header */ + __le32 entry_point; /* NIC entry point */ + __le32 blocks; /* Number of blocks to program */ + __le32 block_offset; /* Offset of block data from eof header */ + __le32 pdr_offset; /* Offset to PDR data from eof header */ + __le32 pri_offset; /* Offset to primary plug data */ + __le32 compat_offset; /* Offset to compatibility data*/ + char signature[0]; /* FW signature length headersize-20 */ +} __packed; + +/* Check the range of various header entries. Return a pointer to a + * description of the problem, or NULL if everything checks out. */ +static const char *validate_fw(const struct orinoco_fw_header *hdr, size_t len) +{ + u16 hdrsize; + + if (len < sizeof(*hdr)) + return "image too small"; + if (memcmp(hdr->hdr_vers, "HFW", 3) != 0) + return "format not recognised"; + + hdrsize = le16_to_cpu(hdr->headersize); + if (hdrsize > len) + return "bad headersize"; + if ((hdrsize + le32_to_cpu(hdr->block_offset)) > len) + return "bad block offset"; + if ((hdrsize + le32_to_cpu(hdr->pdr_offset)) > len) + return "bad PDR offset"; + if ((hdrsize + le32_to_cpu(hdr->pri_offset)) > len) + return "bad PRI offset"; + if ((hdrsize + le32_to_cpu(hdr->compat_offset)) > len) + return "bad compat offset"; + + /* TODO: consider adding a checksum or CRC to the firmware format */ + return NULL; +} + +#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) +static inline const struct firmware * +orinoco_cached_fw_get(struct orinoco_private *priv, bool primary) +{ + if (primary) + return priv->cached_pri_fw; + else + return priv->cached_fw; +} +#else +#define orinoco_cached_fw_get(priv, primary) (NULL) +#endif + +/* Download either STA or AP firmware into the card. */ +static int +orinoco_dl_firmware(struct orinoco_private *priv, + const struct fw_info *fw, + int ap) +{ + /* Plug Data Area (PDA) */ + __le16 *pda; + + struct hermes *hw = &priv->hw; + const struct firmware *fw_entry; + const struct orinoco_fw_header *hdr; + const unsigned char *first_block; + const void *end; + const char *firmware; + const char *fw_err; + struct device *dev = priv->dev; + int err = 0; + + pda = kzalloc(fw->pda_size, GFP_KERNEL); + if (!pda) + return -ENOMEM; + + if (ap) + firmware = fw->ap_fw; + else + firmware = fw->sta_fw; + + dev_dbg(dev, "Attempting to download firmware %s\n", firmware); + + /* Read current plug data */ + err = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size); + dev_dbg(dev, "Read PDA returned %d\n", err); + if (err) + goto free; + + if (!orinoco_cached_fw_get(priv, false)) { + err = request_firmware(&fw_entry, firmware, priv->dev); + + if (err) { + dev_err(dev, "Cannot find firmware %s\n", firmware); + err = -ENOENT; + goto free; + } + } else + fw_entry = orinoco_cached_fw_get(priv, false); + + hdr = (const struct orinoco_fw_header *) fw_entry->data; + + fw_err = validate_fw(hdr, fw_entry->size); + if (fw_err) { + dev_warn(dev, "Invalid firmware image detected (%s). " + "Aborting download\n", fw_err); + err = -EINVAL; + goto abort; + } + + /* Enable aux port to allow programming */ + err = hw->ops->program_init(hw, le32_to_cpu(hdr->entry_point)); + dev_dbg(dev, "Program init returned %d\n", err); + if (err != 0) + goto abort; + + /* Program data */ + first_block = (fw_entry->data + + le16_to_cpu(hdr->headersize) + + le32_to_cpu(hdr->block_offset)); + end = fw_entry->data + fw_entry->size; + + err = hermes_program(hw, first_block, end); + dev_dbg(dev, "Program returned %d\n", err); + if (err != 0) + goto abort; + + /* Update production data */ + first_block = (fw_entry->data + + le16_to_cpu(hdr->headersize) + + le32_to_cpu(hdr->pdr_offset)); + + err = hermes_apply_pda_with_defaults(hw, first_block, end, pda, + &pda[fw->pda_size / sizeof(*pda)]); + dev_dbg(dev, "Apply PDA returned %d\n", err); + if (err) + goto abort; + + /* Tell card we've finished */ + err = hw->ops->program_end(hw); + dev_dbg(dev, "Program end returned %d\n", err); + if (err != 0) + goto abort; + + /* Check if we're running */ + dev_dbg(dev, "hermes_present returned %d\n", hermes_present(hw)); + +abort: + /* If we requested the firmware, release it. */ + if (!orinoco_cached_fw_get(priv, false)) + release_firmware(fw_entry); + +free: + kfree(pda); + return err; +} + +/* + * Process a firmware image - stop the card, load the firmware, reset + * the card and make sure it responds. For the secondary firmware take + * care of the PDA - read it and then write it on top of the firmware. + */ +static int +symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw, + const unsigned char *image, const void *end, + int secondary) +{ + struct hermes *hw = &priv->hw; + int ret = 0; + const unsigned char *ptr; + const unsigned char *first_block; + + /* Plug Data Area (PDA) */ + __le16 *pda = NULL; + + /* Binary block begins after the 0x1A marker */ + ptr = image; + while (*ptr++ != TEXT_END); + first_block = ptr; + + /* Read the PDA from EEPROM */ + if (secondary) { + pda = kzalloc(fw->pda_size, GFP_KERNEL); + if (!pda) + return -ENOMEM; + + ret = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size); + if (ret) + goto free; + } + + /* Stop the firmware, so that it can be safely rewritten */ + if (priv->stop_fw) { + ret = priv->stop_fw(priv, 1); + if (ret) + goto free; + } + + /* Program the adapter with new firmware */ + ret = hermes_program(hw, first_block, end); + if (ret) + goto free; + + /* Write the PDA to the adapter */ + if (secondary) { + size_t len = hermes_blocks_length(first_block, end); + ptr = first_block + len; + ret = hermes_apply_pda(hw, ptr, end, pda, + &pda[fw->pda_size / sizeof(*pda)]); + kfree(pda); + if (ret) + return ret; + } + + /* Run the firmware */ + if (priv->stop_fw) { + ret = priv->stop_fw(priv, 0); + if (ret) + return ret; + } + + /* Reset hermes chip and make sure it responds */ + ret = hw->ops->init(hw); + + /* hermes_reset() should return 0 with the secondary firmware */ + if (secondary && ret != 0) + return -ENODEV; + + /* And this should work with any firmware */ + if (!hermes_present(hw)) + return -ENODEV; + + return 0; + +free: + kfree(pda); + return ret; +} + + +/* + * Download the firmware into the card, this also does a PCMCIA soft + * reset on the card, to make sure it's in a sane state. + */ +static int +symbol_dl_firmware(struct orinoco_private *priv, + const struct fw_info *fw) +{ + struct device *dev = priv->dev; + int ret; + const struct firmware *fw_entry; + + if (!orinoco_cached_fw_get(priv, true)) { + if (request_firmware(&fw_entry, fw->pri_fw, priv->dev) != 0) { + dev_err(dev, "Cannot find firmware: %s\n", fw->pri_fw); + return -ENOENT; + } + } else + fw_entry = orinoco_cached_fw_get(priv, true); + + /* Load primary firmware */ + ret = symbol_dl_image(priv, fw, fw_entry->data, + fw_entry->data + fw_entry->size, 0); + + if (!orinoco_cached_fw_get(priv, true)) + release_firmware(fw_entry); + if (ret) { + dev_err(dev, "Primary firmware download failed\n"); + return ret; + } + + if (!orinoco_cached_fw_get(priv, false)) { + if (request_firmware(&fw_entry, fw->sta_fw, priv->dev) != 0) { + dev_err(dev, "Cannot find firmware: %s\n", fw->sta_fw); + return -ENOENT; + } + } else + fw_entry = orinoco_cached_fw_get(priv, false); + + /* Load secondary firmware */ + ret = symbol_dl_image(priv, fw, fw_entry->data, + fw_entry->data + fw_entry->size, 1); + if (!orinoco_cached_fw_get(priv, false)) + release_firmware(fw_entry); + if (ret) + dev_err(dev, "Secondary firmware download failed\n"); + + return ret; +} + +int orinoco_download(struct orinoco_private *priv) +{ + int err = 0; + /* Reload firmware */ + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + /* case FIRMWARE_TYPE_INTERSIL: */ + err = orinoco_dl_firmware(priv, + &orinoco_fw[priv->firmware_type], 0); + break; + + case FIRMWARE_TYPE_SYMBOL: + err = symbol_dl_firmware(priv, + &orinoco_fw[priv->firmware_type]); + break; + case FIRMWARE_TYPE_INTERSIL: + break; + } + /* TODO: if we fail we probably need to reinitialise + * the driver */ + + return err; +} + +#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) +void orinoco_cache_fw(struct orinoco_private *priv, int ap) +{ + const struct firmware *fw_entry = NULL; + const char *pri_fw; + const char *fw; + + pri_fw = orinoco_fw[priv->firmware_type].pri_fw; + if (ap) + fw = orinoco_fw[priv->firmware_type].ap_fw; + else + fw = orinoco_fw[priv->firmware_type].sta_fw; + + if (pri_fw) { + if (request_firmware(&fw_entry, pri_fw, priv->dev) == 0) + priv->cached_pri_fw = fw_entry; + } + + if (fw) { + if (request_firmware(&fw_entry, fw, priv->dev) == 0) + priv->cached_fw = fw_entry; + } +} + +void orinoco_uncache_fw(struct orinoco_private *priv) +{ + release_firmware(priv->cached_pri_fw); + release_firmware(priv->cached_fw); + priv->cached_pri_fw = NULL; + priv->cached_fw = NULL; +} +#endif diff --git a/drivers/net/wireless/orinoco/fw.h b/drivers/net/wireless/orinoco/fw.h new file mode 100644 index 00000000000..aca63e3c4b5 --- /dev/null +++ b/drivers/net/wireless/orinoco/fw.h @@ -0,0 +1,21 @@ +/* Firmware file reading and download helpers + * + * See copyright notice in main.c + */ +#ifndef _ORINOCO_FW_H_ +#define _ORINOCO_FW_H_ + +/* Forward declations */ +struct orinoco_private; + +int orinoco_download(struct orinoco_private *priv); + +#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) +void orinoco_cache_fw(struct orinoco_private *priv, int ap); +void orinoco_uncache_fw(struct orinoco_private *priv); +#else +#define orinoco_cache_fw(priv, ap) do { } while (0) +#define orinoco_uncache_fw(priv) do { } while (0) +#endif + +#endif /* _ORINOCO_FW_H_ */ diff --git a/drivers/net/wireless/orinoco/hermes.c b/drivers/net/wireless/orinoco/hermes.c index bfa375369df..43790fbea0e 100644 --- a/drivers/net/wireless/orinoco/hermes.c +++ b/drivers/net/wireless/orinoco/hermes.c @@ -15,7 +15,7 @@ * * Copyright (C) 2000, David Gibson, Linuxcare Australia. * (C) Copyright David Gibson, IBM Corp. 2001-2003. - * + * * The contents of this file are subject to the Mozilla Public License * Version 1.1 (the "License"); you may not use this file except in * compliance with the License. You may obtain a copy of the License @@ -40,16 +40,10 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/delay.h> #include "hermes.h" -MODULE_DESCRIPTION("Low-level driver helper for Lucent Hermes chipset and Prism II HFA384x wireless MAC controller"); -MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>" - " & David Gibson <hermes@gibson.dropbear.id.au>"); -MODULE_LICENSE("Dual MPL/GPL"); - /* These are maximum timeouts. Most often, card wil react much faster */ #define CMD_BUSY_TIMEOUT (100) /* In iterations of ~1us */ #define CMD_INIT_TIMEOUT (50000) /* in iterations of ~10us */ @@ -57,17 +51,37 @@ MODULE_LICENSE("Dual MPL/GPL"); #define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */ /* + * AUX port access. To unlock the AUX port write the access keys to the + * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL + * register. Then read it and make sure it's HERMES_AUX_ENABLED. + */ +#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */ +#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */ +#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */ +#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */ + +#define HERMES_AUX_PW0 0xFE01 +#define HERMES_AUX_PW1 0xDC23 +#define HERMES_AUX_PW2 0xBA45 + +/* HERMES_CMD_DOWNLD */ +#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD) + +/* * Debugging helpers */ #define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \ - printk(stuff);} while (0) + printk(stuff); } while (0) #undef HERMES_DEBUG #ifdef HERMES_DEBUG #include <stdarg.h> -#define DEBUG(lvl, stuff...) if ( (lvl) <= HERMES_DEBUG) DMSG(stuff) +#define DEBUG(lvl, stuff...) if ((lvl) <= HERMES_DEBUG) DMSG(stuff) #else /* ! HERMES_DEBUG */ @@ -75,6 +89,7 @@ MODULE_LICENSE("Dual MPL/GPL"); #endif /* ! HERMES_DEBUG */ +static const struct hermes_ops hermes_ops_local; /* * Internal functions @@ -87,7 +102,7 @@ MODULE_LICENSE("Dual MPL/GPL"); Callable from any context. */ -static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0, +static int hermes_issue_cmd(struct hermes *hw, u16 cmd, u16 param0, u16 param1, u16 param2) { int k = CMD_BUSY_TIMEOUT; @@ -95,20 +110,19 @@ static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0, /* First wait for the command register to unbusy */ reg = hermes_read_regn(hw, CMD); - while ( (reg & HERMES_CMD_BUSY) && k ) { + while ((reg & HERMES_CMD_BUSY) && k) { k--; udelay(1); reg = hermes_read_regn(hw, CMD); } - if (reg & HERMES_CMD_BUSY) { + if (reg & HERMES_CMD_BUSY) return -EBUSY; - } hermes_write_regn(hw, PARAM2, param2); hermes_write_regn(hw, PARAM1, param1); hermes_write_regn(hw, PARAM0, param0); hermes_write_regn(hw, CMD, cmd); - + return 0; } @@ -117,9 +131,9 @@ static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0, */ /* For doing cmds that wipe the magic constant in SWSUPPORT0 */ -int hermes_doicmd_wait(hermes_t *hw, u16 cmd, - u16 parm0, u16 parm1, u16 parm2, - struct hermes_response *resp) +static int hermes_doicmd_wait(struct hermes *hw, u16 cmd, + u16 parm0, u16 parm1, u16 parm2, + struct hermes_response *resp) { int err = 0; int k; @@ -169,17 +183,19 @@ int hermes_doicmd_wait(hermes_t *hw, u16 cmd, out: return err; } -EXPORT_SYMBOL(hermes_doicmd_wait); -void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing) +void hermes_struct_init(struct hermes *hw, void __iomem *address, + int reg_spacing) { hw->iobase = address; hw->reg_spacing = reg_spacing; hw->inten = 0x0; + hw->eeprom_pda = false; + hw->ops = &hermes_ops_local; } EXPORT_SYMBOL(hermes_struct_init); -int hermes_init(hermes_t *hw) +static int hermes_init(struct hermes *hw) { u16 reg; int err = 0; @@ -191,23 +207,23 @@ int hermes_init(hermes_t *hw) hermes_write_regn(hw, EVACK, 0xffff); /* Normally it's a "can't happen" for the command register to - be busy when we go to issue a command because we are - serializing all commands. However we want to have some - chance of resetting the card even if it gets into a stupid - state, so we actually wait to see if the command register - will unbusy itself here. */ + be busy when we go to issue a command because we are + serializing all commands. However we want to have some + chance of resetting the card even if it gets into a stupid + state, so we actually wait to see if the command register + will unbusy itself here. */ k = CMD_BUSY_TIMEOUT; reg = hermes_read_regn(hw, CMD); while (k && (reg & HERMES_CMD_BUSY)) { - if (reg == 0xffff) /* Special case - the card has probably been removed, - so don't wait for the timeout */ + if (reg == 0xffff) /* Special case - the card has probably been + removed, so don't wait for the timeout */ return -ENODEV; k--; udelay(1); reg = hermes_read_regn(hw, CMD); } - + /* No need to explicitly handle the timeout - if we've timed out hermes_issue_cmd() will probably return -EBUSY below */ @@ -223,16 +239,18 @@ int hermes_init(hermes_t *hw) return err; } -EXPORT_SYMBOL(hermes_init); /* Issue a command to the chip, and (busy!) wait for it to * complete. * - * Returns: < 0 on internal error, 0 on success, > 0 on error returned by the firmware + * Returns: + * < 0 on internal error + * 0 on success + * > 0 on error returned by the firmware * * Callable from any context, but locking is your problem. */ -int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, - struct hermes_response *resp) +static int hermes_docmd_wait(struct hermes *hw, u16 cmd, u16 parm0, + struct hermes_response *resp) { int err; int k; @@ -241,13 +259,13 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, err = hermes_issue_cmd(hw, cmd, parm0, 0, 0); if (err) { - if (! hermes_present(hw)) { + if (!hermes_present(hw)) { if (net_ratelimit()) printk(KERN_WARNING "hermes @ %p: " "Card removed while issuing command " "0x%04x.\n", hw->iobase, cmd); err = -ENODEV; - } else + } else if (net_ratelimit()) printk(KERN_ERR "hermes @ %p: " "Error %d issuing command 0x%04x.\n", @@ -257,21 +275,21 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, reg = hermes_read_regn(hw, EVSTAT); k = CMD_COMPL_TIMEOUT; - while ( (! (reg & HERMES_EV_CMD)) && k) { + while ((!(reg & HERMES_EV_CMD)) && k) { k--; udelay(10); reg = hermes_read_regn(hw, EVSTAT); } - if (! hermes_present(hw)) { + if (!hermes_present(hw)) { printk(KERN_WARNING "hermes @ %p: Card removed " "while waiting for command 0x%04x completion.\n", hw->iobase, cmd); err = -ENODEV; goto out; } - - if (! (reg & HERMES_EV_CMD)) { + + if (!(reg & HERMES_EV_CMD)) { printk(KERN_ERR "hermes @ %p: Timeout waiting for " "command 0x%04x completion.\n", hw->iobase, cmd); err = -ETIMEDOUT; @@ -294,38 +312,36 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, out: return err; } -EXPORT_SYMBOL(hermes_docmd_wait); -int hermes_allocate(hermes_t *hw, u16 size, u16 *fid) +static int hermes_allocate(struct hermes *hw, u16 size, u16 *fid) { int err = 0; int k; u16 reg; - - if ( (size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX) ) + + if ((size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX)) return -EINVAL; err = hermes_docmd_wait(hw, HERMES_CMD_ALLOC, size, NULL); - if (err) { + if (err) return err; - } reg = hermes_read_regn(hw, EVSTAT); k = ALLOC_COMPL_TIMEOUT; - while ( (! (reg & HERMES_EV_ALLOC)) && k) { + while ((!(reg & HERMES_EV_ALLOC)) && k) { k--; udelay(10); reg = hermes_read_regn(hw, EVSTAT); } - - if (! hermes_present(hw)) { + + if (!hermes_present(hw)) { printk(KERN_WARNING "hermes @ %p: " "Card removed waiting for frame allocation.\n", hw->iobase); return -ENODEV; } - - if (! (reg & HERMES_EV_ALLOC)) { + + if (!(reg & HERMES_EV_ALLOC)) { printk(KERN_ERR "hermes @ %p: " "Timeout waiting for frame allocation\n", hw->iobase); @@ -334,18 +350,20 @@ int hermes_allocate(hermes_t *hw, u16 size, u16 *fid) *fid = hermes_read_regn(hw, ALLOCFID); hermes_write_regn(hw, EVACK, HERMES_EV_ALLOC); - + return 0; } -EXPORT_SYMBOL(hermes_allocate); /* Set up a BAP to read a particular chunk of data from card's internal buffer. * - * Returns: < 0 on internal failure (errno), 0 on success, >0 on error + * Returns: + * < 0 on internal failure (errno) + * 0 on success + * > 0 on error * from firmware * * Callable from any context */ -static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset) +static int hermes_bap_seek(struct hermes *hw, int bap, u16 id, u16 offset) { int sreg = bap ? HERMES_SELECT1 : HERMES_SELECT0; int oreg = bap ? HERMES_OFFSET1 : HERMES_OFFSET0; @@ -353,7 +371,7 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset) u16 reg; /* Paranoia.. */ - if ( (offset > HERMES_BAP_OFFSET_MAX) || (offset % 2) ) + if ((offset > HERMES_BAP_OFFSET_MAX) || (offset % 2)) return -EINVAL; k = HERMES_BAP_BUSY_TIMEOUT; @@ -374,7 +392,7 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset) /* Wait for the BAP to be ready */ k = HERMES_BAP_BUSY_TIMEOUT; reg = hermes_read_reg(hw, oreg); - while ( (reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) { + while ((reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) { k--; udelay(1); reg = hermes_read_reg(hw, oreg); @@ -386,9 +404,8 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset) (reg & HERMES_OFFSET_BUSY) ? "timeout" : "error", reg, id, offset); - if (reg & HERMES_OFFSET_BUSY) { + if (reg & HERMES_OFFSET_BUSY) return -ETIMEDOUT; - } return -EIO; /* error or wrong offset */ } @@ -400,15 +417,18 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset) * BAP. Synchronization/serialization is the caller's problem. len * must be even. * - * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware + * Returns: + * < 0 on internal failure (errno) + * 0 on success + * > 0 on error from firmware */ -int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, - u16 id, u16 offset) +static int hermes_bap_pread(struct hermes *hw, int bap, void *buf, int len, + u16 id, u16 offset) { int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; int err = 0; - if ( (len < 0) || (len % 2) ) + if ((len < 0) || (len % 2)) return -EINVAL; err = hermes_bap_seek(hw, bap, id, offset); @@ -416,20 +436,22 @@ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, goto out; /* Actually do the transfer */ - hermes_read_words(hw, dreg, buf, len/2); + hermes_read_words(hw, dreg, buf, len / 2); out: return err; } -EXPORT_SYMBOL(hermes_bap_pread); /* Write a block of data to the chip's buffer, via the * BAP. Synchronization/serialization is the caller's problem. * - * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware + * Returns: + * < 0 on internal failure (errno) + * 0 on success + * > 0 on error from firmware */ -int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, - u16 id, u16 offset) +static int hermes_bap_pwrite(struct hermes *hw, int bap, const void *buf, + int len, u16 id, u16 offset) { int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; int err = 0; @@ -440,14 +462,13 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, err = hermes_bap_seek(hw, bap, id, offset); if (err) goto out; - + /* Actually do the transfer */ hermes_write_bytes(hw, dreg, buf, len); - out: + out: return err; } -EXPORT_SYMBOL(hermes_bap_pwrite); /* Read a Length-Type-Value record from the card. * @@ -457,15 +478,15 @@ EXPORT_SYMBOL(hermes_bap_pwrite); * practice. * * Callable from user or bh context. */ -int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, - u16 *length, void *buf) +static int hermes_read_ltv(struct hermes *hw, int bap, u16 rid, + unsigned bufsize, u16 *length, void *buf) { int err = 0; int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; u16 rlength, rtype; unsigned nwords; - if ( (bufsize < 0) || (bufsize % 2) ) + if (bufsize % 2) return -EINVAL; err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL); @@ -478,7 +499,7 @@ int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, rlength = hermes_read_reg(hw, dreg); - if (! rlength) + if (!rlength) return -ENODATA; rtype = hermes_read_reg(hw, dreg); @@ -501,10 +522,9 @@ int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, return 0; } -EXPORT_SYMBOL(hermes_read_ltv); -int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, - u16 length, const void *value) +static int hermes_write_ltv(struct hermes *hw, int bap, u16 rid, + u16 length, const void *value) { int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; int err = 0; @@ -529,16 +549,229 @@ int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, return err; } -EXPORT_SYMBOL(hermes_write_ltv); -static int __init init_hermes(void) +/*** Hermes AUX control ***/ + +static inline void +hermes_aux_setaddr(struct hermes *hw, u32 addr) +{ + hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7)); + hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F)); +} + +static inline int +hermes_aux_control(struct hermes *hw, int enabled) +{ + int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED; + int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE; + int i; + + /* Already open? */ + if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state) + return 0; + + hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0); + hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1); + hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2); + hermes_write_reg(hw, HERMES_CONTROL, action); + + for (i = 0; i < 20; i++) { + udelay(10); + if (hermes_read_reg(hw, HERMES_CONTROL) == + desired_state) + return 0; + } + + return -EBUSY; +} + +/*** Hermes programming ***/ + +/* About to start programming data (Hermes I) + * offset is the entry point + * + * Spectrum_cs' Symbol fw does not require this + * wl_lkm Agere fw does + * Don't know about intersil + */ +static int hermesi_program_init(struct hermes *hw, u32 offset) { + int err; + + /* Disable interrupts?*/ + /*hw->inten = 0x0;*/ + /*hermes_write_regn(hw, INTEN, 0);*/ + /*hermes_set_irqmask(hw, 0);*/ + + /* Acknowledge any outstanding command */ + hermes_write_regn(hw, EVACK, 0xFFFF); + + /* Using init_cmd_wait rather than cmd_wait */ + err = hw->ops->init_cmd_wait(hw, + 0x0100 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + if (err) + return err; + + err = hw->ops->init_cmd_wait(hw, + 0x0000 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + if (err) + return err; + + err = hermes_aux_control(hw, 1); + pr_debug("AUX enable returned %d\n", err); + + if (err) + return err; + + pr_debug("Enabling volatile, EP 0x%08x\n", offset); + err = hw->ops->init_cmd_wait(hw, + HERMES_PROGRAM_ENABLE_VOLATILE, + offset & 0xFFFFu, + offset >> 16, + 0, + NULL); + pr_debug("PROGRAM_ENABLE returned %d\n", err); + + return err; +} + +/* Done programming data (Hermes I) + * + * Spectrum_cs' Symbol fw does not require this + * wl_lkm Agere fw does + * Don't know about intersil + */ +static int hermesi_program_end(struct hermes *hw) +{ + struct hermes_response resp; + int rc = 0; + int err; + + rc = hw->ops->cmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp); + + pr_debug("PROGRAM_DISABLE returned %d, " + "r0 0x%04x, r1 0x%04x, r2 0x%04x\n", + rc, resp.resp0, resp.resp1, resp.resp2); + + if ((rc == 0) && + ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD)) + rc = -EIO; + + err = hermes_aux_control(hw, 0); + pr_debug("AUX disable returned %d\n", err); + + /* Acknowledge any outstanding command */ + hermes_write_regn(hw, EVACK, 0xFFFF); + + /* Reinitialise, ignoring return */ + (void) hw->ops->init_cmd_wait(hw, 0x0000 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + + return rc ? rc : err; +} + +static int hermes_program_bytes(struct hermes *hw, const char *data, + u32 addr, u32 len) +{ + /* wl lkm splits the programming into chunks of 2000 bytes. + * This restriction appears to come from USB. The PCMCIA + * adapters can program the whole lot in one go */ + hermes_aux_setaddr(hw, addr); + hermes_write_bytes(hw, HERMES_AUXDATA, data, len); + return 0; +} + +/* Read PDA from the adapter */ +static int hermes_read_pda(struct hermes *hw, __le16 *pda, u32 pda_addr, + u16 pda_len) +{ + int ret; + u16 pda_size; + u16 data_len = pda_len; + __le16 *data = pda; + + if (hw->eeprom_pda) { + /* PDA of spectrum symbol is in eeprom */ + + /* Issue command to read EEPROM */ + ret = hw->ops->cmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); + if (ret) + return ret; + } else { + /* wl_lkm does not include PDA size in the PDA area. + * We will pad the information into pda, so other routines + * don't have to be modified */ + pda[0] = cpu_to_le16(pda_len - 2); + /* Includes CFG_PROD_DATA but not itself */ + pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */ + data_len = pda_len - 4; + data = pda + 2; + } + + /* Open auxiliary port */ + ret = hermes_aux_control(hw, 1); + pr_debug("AUX enable returned %d\n", ret); + if (ret) + return ret; + + /* Read PDA */ + hermes_aux_setaddr(hw, pda_addr); + hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2); + + /* Close aux port */ + ret = hermes_aux_control(hw, 0); + pr_debug("AUX disable returned %d\n", ret); + + /* Check PDA length */ + pda_size = le16_to_cpu(pda[0]); + pr_debug("Actual PDA length %d, Max allowed %d\n", + pda_size, pda_len); + if (pda_size > pda_len) + return -EINVAL; + return 0; } -static void __exit exit_hermes(void) +static void hermes_lock_irqsave(spinlock_t *lock, + unsigned long *flags) __acquires(lock) +{ + spin_lock_irqsave(lock, *flags); +} + +static void hermes_unlock_irqrestore(spinlock_t *lock, + unsigned long *flags) __releases(lock) +{ + spin_unlock_irqrestore(lock, *flags); +} + +static void hermes_lock_irq(spinlock_t *lock) __acquires(lock) +{ + spin_lock_irq(lock); +} + +static void hermes_unlock_irq(spinlock_t *lock) __releases(lock) { + spin_unlock_irq(lock); } -module_init(init_hermes); -module_exit(exit_hermes); +/* Hermes operations for local buses */ +static const struct hermes_ops hermes_ops_local = { + .init = hermes_init, + .cmd_wait = hermes_docmd_wait, + .init_cmd_wait = hermes_doicmd_wait, + .allocate = hermes_allocate, + .read_ltv = hermes_read_ltv, + .write_ltv = hermes_write_ltv, + .bap_pread = hermes_bap_pread, + .bap_pwrite = hermes_bap_pwrite, + .read_pda = hermes_read_pda, + .program_init = hermesi_program_init, + .program_end = hermesi_program_end, + .program = hermes_program_bytes, + .lock_irqsave = hermes_lock_irqsave, + .unlock_irqrestore = hermes_unlock_irqrestore, + .lock_irq = hermes_lock_irq, + .unlock_irq = hermes_unlock_irq, +}; diff --git a/drivers/net/wireless/orinoco/hermes.h b/drivers/net/wireless/orinoco/hermes.h index 8b13c8fef3d..28a42448d32 100644 --- a/drivers/net/wireless/orinoco/hermes.h +++ b/drivers/net/wireless/orinoco/hermes.h @@ -15,7 +15,8 @@ * Copyright (C) 2000, David Gibson, Linuxcare Australia. * (C) Copyright David Gibson, IBM Corp. 2001-2003. * - * Portions taken from hfa384x.h, Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + * Portions taken from hfa384x.h. + * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. * * This file distributed under the GPL, version 2. */ @@ -27,11 +28,11 @@ * * As a module of low level hardware access routines, there is no * locking. Users of this module should ensure that they serialize - * access to the hermes_t structure, and to the hardware + * access to the hermes structure, and to the hardware */ #include <linux/if_ether.h> -#include <asm/io.h> +#include <linux/io.h> /* * Limits and constants @@ -42,7 +43,7 @@ #define HERMES_BAP_DATALEN_MAX (4096) #define HERMES_BAP_OFFSET_MAX (4096) #define HERMES_PORTID_MAX (7) -#define HERMES_NUMPORTS_MAX (HERMES_PORTID_MAX+1) +#define HERMES_NUMPORTS_MAX (HERMES_PORTID_MAX + 1) #define HERMES_PDR_LEN_MAX (260) /* in bytes, from EK */ #define HERMES_PDA_RECS_MAX (200) /* a guess */ #define HERMES_PDA_LEN_MAX (1024) /* in bytes, from EK */ @@ -147,7 +148,7 @@ #define HERMES_CMD_WRITEMIF (0x0031) /*--- Debugging Commands -----------------------------*/ -#define HERMES_CMD_TEST (0x0038) +#define HERMES_CMD_TEST (0x0038) /* Test command arguments */ @@ -177,8 +178,8 @@ #define HERMES_DESCRIPTOR_OFFSET 0 #define HERMES_802_11_OFFSET (14) -#define HERMES_802_3_OFFSET (14+32) -#define HERMES_802_2_OFFSET (14+32+14) +#define HERMES_802_3_OFFSET (14 + 32) +#define HERMES_802_2_OFFSET (14 + 32 + 14) #define HERMES_TXCNTL2_OFFSET (HERMES_802_3_OFFSET - 2) #define HERMES_RXSTAT_ERR (0x0003) @@ -203,8 +204,8 @@ struct hermes_tx_descriptor { __le32 sw_support; u8 retry_count; u8 tx_rate; - __le16 tx_control; -} __attribute__ ((packed)); + __le16 tx_control; +} __packed; #define HERMES_TXSTAT_RETRYERR (0x0001) #define HERMES_TXSTAT_AGEDERR (0x0002) @@ -253,7 +254,7 @@ struct hermes_tallies_frame { /* Those last are probably not available in very old firmwares */ __le16 RxDiscards_WEPICVError; __le16 RxDiscards_WEPExcluded; -} __attribute__ ((packed)); +} __packed; /* Grabbed from wlan-ng - Thanks Mark... - Jean II * This is the result of a scan inquiry command */ @@ -270,7 +271,7 @@ struct prism2_scan_apinfo { u8 rates[10]; /* Bit rate supported */ __le16 proberesp_rate; /* Data rate of the response frame */ __le16 atim; /* ATIM window time, Kus (hostscan only) */ -} __attribute__ ((packed)); +} __packed; /* Same stuff for the Lucent/Agere card. * Thanks to h1kari <h1kari AT dachb0den.com> - Jean II */ @@ -284,7 +285,7 @@ struct agere_scan_apinfo { /* bits: 0-ess, 1-ibss, 4-privacy [wep] */ __le16 essid_len; /* ESSID length */ u8 essid[32]; /* ESSID of the network */ -} __attribute__ ((packed)); +} __packed; /* Moustafa: Scan structure for Symbol cards */ struct symbol_scan_apinfo { @@ -298,11 +299,11 @@ struct symbol_scan_apinfo { /* bits: 0-ess, 1-ibss, 4-privacy [wep] */ __le16 essid_len; /* ESSID length */ u8 essid[32]; /* ESSID of the network */ - __le16 rates[5]; /* Bit rate supported */ + __le16 rates[5]; /* Bit rate supported */ __le16 basic_rates; /* Basic rates bitmask */ u8 unknown2[6]; /* Always FF:FF:FF:FF:00:00 */ u8 unknown3[8]; /* Always 0, appeared in f/w 3.91-68 */ -} __attribute__ ((packed)); +} __packed; union hermes_scan_info { struct agere_scan_apinfo a; @@ -341,20 +342,20 @@ struct agere_ext_scan_info { __le64 timestamp; __le16 beacon_interval; __le16 capabilities; - u8 data[316]; -} __attribute__ ((packed)); + u8 data[0]; +} __packed; -#define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000) +#define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000) #define HERMES_LINKSTATUS_CONNECTED (0x0001) #define HERMES_LINKSTATUS_DISCONNECTED (0x0002) #define HERMES_LINKSTATUS_AP_CHANGE (0x0003) #define HERMES_LINKSTATUS_AP_OUT_OF_RANGE (0x0004) #define HERMES_LINKSTATUS_AP_IN_RANGE (0x0005) #define HERMES_LINKSTATUS_ASSOC_FAILED (0x0006) - + struct hermes_linkstatus { __le16 linkstatus; /* Link status */ -} __attribute__ ((packed)); +} __packed; struct hermes_response { u16 status, resp0, resp1, resp2; @@ -364,88 +365,109 @@ struct hermes_response { struct hermes_idstring { __le16 len; __le16 val[16]; -} __attribute__ ((packed)); +} __packed; struct hermes_multicast { u8 addr[HERMES_MAX_MULTICAST][ETH_ALEN]; -} __attribute__ ((packed)); +} __packed; /* Timeouts */ #define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */ +struct hermes; + +/* Functions to access hardware */ +struct hermes_ops { + int (*init)(struct hermes *hw); + int (*cmd_wait)(struct hermes *hw, u16 cmd, u16 parm0, + struct hermes_response *resp); + int (*init_cmd_wait)(struct hermes *hw, u16 cmd, + u16 parm0, u16 parm1, u16 parm2, + struct hermes_response *resp); + int (*allocate)(struct hermes *hw, u16 size, u16 *fid); + int (*read_ltv)(struct hermes *hw, int bap, u16 rid, unsigned buflen, + u16 *length, void *buf); + int (*write_ltv)(struct hermes *hw, int bap, u16 rid, + u16 length, const void *value); + int (*bap_pread)(struct hermes *hw, int bap, void *buf, int len, + u16 id, u16 offset); + int (*bap_pwrite)(struct hermes *hw, int bap, const void *buf, + int len, u16 id, u16 offset); + int (*read_pda)(struct hermes *hw, __le16 *pda, + u32 pda_addr, u16 pda_len); + int (*program_init)(struct hermes *hw, u32 entry_point); + int (*program_end)(struct hermes *hw); + int (*program)(struct hermes *hw, const char *buf, + u32 addr, u32 len); + void (*lock_irqsave)(spinlock_t *lock, unsigned long *flags); + void (*unlock_irqrestore)(spinlock_t *lock, unsigned long *flags); + void (*lock_irq)(spinlock_t *lock); + void (*unlock_irq)(spinlock_t *lock); +}; + /* Basic control structure */ -typedef struct hermes { +struct hermes { void __iomem *iobase; int reg_spacing; #define HERMES_16BIT_REGSPACING 0 #define HERMES_32BIT_REGSPACING 1 u16 inten; /* Which interrupts should be enabled? */ -} hermes_t; + bool eeprom_pda; + const struct hermes_ops *ops; + void *priv; +}; /* Register access convenience macros */ #define hermes_read_reg(hw, off) \ - (ioread16((hw)->iobase + ( (off) << (hw)->reg_spacing ))) + (ioread16((hw)->iobase + ((off) << (hw)->reg_spacing))) #define hermes_write_reg(hw, off, val) \ (iowrite16((val), (hw)->iobase + ((off) << (hw)->reg_spacing))) #define hermes_read_regn(hw, name) hermes_read_reg((hw), HERMES_##name) -#define hermes_write_regn(hw, name, val) hermes_write_reg((hw), HERMES_##name, (val)) +#define hermes_write_regn(hw, name, val) \ + hermes_write_reg((hw), HERMES_##name, (val)) /* Function prototypes */ -void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing); -int hermes_init(hermes_t *hw); -int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, - struct hermes_response *resp); -int hermes_doicmd_wait(hermes_t *hw, u16 cmd, - u16 parm0, u16 parm1, u16 parm2, - struct hermes_response *resp); -int hermes_allocate(hermes_t *hw, u16 size, u16 *fid); - -int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, - u16 id, u16 offset); -int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, - u16 id, u16 offset); -int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen, - u16 *length, void *buf); -int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, - u16 length, const void *value); +void hermes_struct_init(struct hermes *hw, void __iomem *address, + int reg_spacing); /* Inline functions */ -static inline int hermes_present(hermes_t *hw) +static inline int hermes_present(struct hermes *hw) { return hermes_read_regn(hw, SWSUPPORT0) == HERMES_MAGIC; } -static inline void hermes_set_irqmask(hermes_t *hw, u16 events) +static inline void hermes_set_irqmask(struct hermes *hw, u16 events) { hw->inten = events; hermes_write_regn(hw, INTEN, events); } -static inline int hermes_enable_port(hermes_t *hw, int port) +static inline int hermes_enable_port(struct hermes *hw, int port) { - return hermes_docmd_wait(hw, HERMES_CMD_ENABLE | (port << 8), + return hw->ops->cmd_wait(hw, HERMES_CMD_ENABLE | (port << 8), 0, NULL); } -static inline int hermes_disable_port(hermes_t *hw, int port) +static inline int hermes_disable_port(struct hermes *hw, int port) { - return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8), + return hw->ops->cmd_wait(hw, HERMES_CMD_DISABLE | (port << 8), 0, NULL); } /* Initiate an INQUIRE command (tallies or scan). The result will come as an * information frame in __orinoco_ev_info() */ -static inline int hermes_inquire(hermes_t *hw, u16 rid) +static inline int hermes_inquire(struct hermes *hw, u16 rid) { - return hermes_docmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL); + return hw->ops->cmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL); } -#define HERMES_BYTES_TO_RECLEN(n) ( (((n)+1)/2) + 1 ) -#define HERMES_RECLEN_TO_BYTES(n) ( ((n)-1) * 2 ) +#define HERMES_BYTES_TO_RECLEN(n) ((((n) + 1) / 2) + 1) +#define HERMES_RECLEN_TO_BYTES(n) (((n) - 1) * 2) /* Note that for the next two, the count is in 16-bit words, not bytes */ -static inline void hermes_read_words(struct hermes *hw, int off, void *buf, unsigned count) +static inline void hermes_read_words(struct hermes *hw, int off, + void *buf, unsigned count) { off = off << hw->reg_spacing; ioread16_rep(hw->iobase + off, buf, count); @@ -460,7 +482,8 @@ static inline void hermes_write_bytes(struct hermes *hw, int off, iowrite8(buf[count - 1], hw->iobase + off); } -static inline void hermes_clear_words(struct hermes *hw, int off, unsigned count) +static inline void hermes_clear_words(struct hermes *hw, int off, + unsigned count) { unsigned i; @@ -471,11 +494,13 @@ static inline void hermes_clear_words(struct hermes *hw, int off, unsigned count } #define HERMES_READ_RECORD(hw, bap, rid, buf) \ - (hermes_read_ltv((hw),(bap),(rid), sizeof(*buf), NULL, (buf))) + (hw->ops->read_ltv((hw), (bap), (rid), sizeof(*buf), NULL, (buf))) #define HERMES_WRITE_RECORD(hw, bap, rid, buf) \ - (hermes_write_ltv((hw),(bap),(rid),HERMES_BYTES_TO_RECLEN(sizeof(*buf)),(buf))) + (hw->ops->write_ltv((hw), (bap), (rid), \ + HERMES_BYTES_TO_RECLEN(sizeof(*buf)), (buf))) -static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word) +static inline int hermes_read_wordrec(struct hermes *hw, int bap, u16 rid, + u16 *word) { __le16 rec; int err; @@ -485,7 +510,8 @@ static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word) return err; } -static inline int hermes_write_wordrec(hermes_t *hw, int bap, u16 rid, u16 word) +static inline int hermes_write_wordrec(struct hermes *hw, int bap, u16 rid, + u16 word) { __le16 rec = cpu_to_le16(word); return HERMES_WRITE_RECORD(hw, bap, rid, &rec); diff --git a/drivers/net/wireless/orinoco/hermes_dld.c b/drivers/net/wireless/orinoco/hermes_dld.c index d8c626e61a3..4a10b7aca04 100644 --- a/drivers/net/wireless/orinoco/hermes_dld.c +++ b/drivers/net/wireless/orinoco/hermes_dld.c @@ -1,13 +1,7 @@ /* - * Hermes download helper driver. + * Hermes download helper. * - * This could be entirely merged into hermes.c. - * - * I'm keeping it separate to minimise the amount of merging between - * kernel upgrades. It also means the memory overhead for drivers that - * don't need firmware download low. - * - * This driver: + * This helper: * - is capable of writing to the volatile area of the hermes device * - is currently not capable of writing to non-volatile areas * - provide helpers to identify and update plugin data @@ -50,56 +44,14 @@ #include "hermes.h" #include "hermes_dld.h" -MODULE_DESCRIPTION("Download helper for Lucent Hermes chipset"); -MODULE_AUTHOR("David Kilroy <kilroyd@gmail.com>"); -MODULE_LICENSE("Dual MPL/GPL"); - #define PFX "hermes_dld: " -/* - * AUX port access. To unlock the AUX port write the access keys to the - * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL - * register. Then read it and make sure it's HERMES_AUX_ENABLED. - */ -#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */ -#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */ -#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */ -#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */ - -#define HERMES_AUX_PW0 0xFE01 -#define HERMES_AUX_PW1 0xDC23 -#define HERMES_AUX_PW2 0xBA45 - -/* HERMES_CMD_DOWNLD */ -#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD) -#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD) -#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD) -#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD) - /* End markers used in dblocks */ #define PDI_END 0x00000000 /* End of PDA */ #define BLOCK_END 0xFFFFFFFF /* Last image block */ #define TEXT_END 0x1A /* End of text header */ /* - * PDA == Production Data Area - * - * In principle, the max. size of the PDA is is 4096 words. Currently, - * however, only about 500 bytes of this area are used. - * - * Some USB implementations can't handle sizes in excess of 1016. Note - * that PDA is not actually used in those USB environments, but may be - * retrieved by common code. - */ -#define MAX_PDA_SIZE 1000 - -/* Limit the amout we try to download in a single shot. - * Size is in bytes. - */ -#define MAX_DL_SIZE 1024 -#define LIMIT_PROGRAM_SIZE 0 - -/* * The following structures have little-endian fields denoted by * the leading underscore. Don't access them directly - use inline * functions defined below. @@ -113,10 +65,10 @@ struct dblock { __le32 addr; /* adapter address where to write the block */ __le16 len; /* length of the data only, in bytes */ char data[0]; /* data to be written */ -} __attribute__ ((packed)); +} __packed; /* - * Plug Data References are located in in the image after the last data + * Plug Data References are located in the image after the last data * block. They refer to areas in the adapter memory where the plug data * items with matching ID should be written. */ @@ -125,7 +77,7 @@ struct pdr { __le32 addr; /* adapter address where to write the data */ __le32 len; /* expected length of the data, in bytes */ char next[0]; /* next PDR starts here */ -} __attribute__ ((packed)); +} __packed; /* * Plug Data Items are located in the EEPROM read from the adapter by @@ -136,7 +88,7 @@ struct pdi { __le16 len; /* length of ID and data, in words */ __le16 id; /* record ID */ char data[0]; /* plug data */ -} __attribute__ ((packed)); +} __packed; /*** FW data block access functions ***/ @@ -187,54 +139,20 @@ pdi_len(const struct pdi *pdi) return 2 * (le16_to_cpu(pdi->len) - 1); } -/*** Hermes AUX control ***/ - -static inline void -hermes_aux_setaddr(hermes_t *hw, u32 addr) -{ - hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7)); - hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F)); -} - -static inline int -hermes_aux_control(hermes_t *hw, int enabled) -{ - int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED; - int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE; - int i; - - /* Already open? */ - if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state) - return 0; - - hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0); - hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1); - hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2); - hermes_write_reg(hw, HERMES_CONTROL, action); - - for (i = 0; i < 20; i++) { - udelay(10); - if (hermes_read_reg(hw, HERMES_CONTROL) == - desired_state) - return 0; - } - - return -EBUSY; -} - /*** Plug Data Functions ***/ /* * Scan PDR for the record with the specified RECORD_ID. * If it's not found, return NULL. */ -static struct pdr * -hermes_find_pdr(struct pdr *first_pdr, u32 record_id) +static const struct pdr * +hermes_find_pdr(const struct pdr *first_pdr, u32 record_id, const void *end) { - struct pdr *pdr = first_pdr; - void *end = (void *)first_pdr + MAX_PDA_SIZE; + const struct pdr *pdr = first_pdr; - while (((void *)pdr < end) && + end -= sizeof(struct pdr); + + while (((void *) pdr <= end) && (pdr_id(pdr) != PDI_END)) { /* * PDR area is currently not terminated by PDI_END. @@ -254,12 +172,15 @@ hermes_find_pdr(struct pdr *first_pdr, u32 record_id) } /* Scan production data items for a particular entry */ -static struct pdi * -hermes_find_pdi(struct pdi *first_pdi, u32 record_id) +static const struct pdi * +hermes_find_pdi(const struct pdi *first_pdi, u32 record_id, const void *end) { - struct pdi *pdi = first_pdi; + const struct pdi *pdi = first_pdi; + + end -= sizeof(struct pdi); - while (pdi_id(pdi) != PDI_END) { + while (((void *) pdi <= end) && + (pdi_id(pdi) != PDI_END)) { /* If the record ID matches, we are done */ if (pdi_id(pdi) == record_id) @@ -272,12 +193,13 @@ hermes_find_pdi(struct pdi *first_pdi, u32 record_id) /* Process one Plug Data Item - find corresponding PDR and plug it */ static int -hermes_plug_pdi(hermes_t *hw, struct pdr *first_pdr, const struct pdi *pdi) +hermes_plug_pdi(struct hermes *hw, const struct pdr *first_pdr, + const struct pdi *pdi, const void *pdr_end) { - struct pdr *pdr; + const struct pdr *pdr; /* Find the PDR corresponding to this PDI */ - pdr = hermes_find_pdr(first_pdr, pdi_id(pdi)); + pdr = hermes_find_pdr(first_pdr, pdi_id(pdi), pdr_end); /* No match is found, safe to ignore */ if (!pdr) @@ -288,86 +210,34 @@ hermes_plug_pdi(hermes_t *hw, struct pdr *first_pdr, const struct pdi *pdi) return -EINVAL; /* do the actual plugging */ - hermes_aux_setaddr(hw, pdr_addr(pdr)); - hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi)); + hw->ops->program(hw, pdi->data, pdr_addr(pdr), pdi_len(pdi)); return 0; } -/* Read PDA from the adapter */ -int hermes_read_pda(hermes_t *hw, - __le16 *pda, - u32 pda_addr, - u16 pda_len, - int use_eeprom) /* can we get this into hw? */ -{ - int ret; - u16 pda_size; - u16 data_len = pda_len; - __le16 *data = pda; - - if (use_eeprom) { - /* PDA of spectrum symbol is in eeprom */ - - /* Issue command to read EEPROM */ - ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); - if (ret) - return ret; - } else { - /* wl_lkm does not include PDA size in the PDA area. - * We will pad the information into pda, so other routines - * don't have to be modified */ - pda[0] = cpu_to_le16(pda_len - 2); - /* Includes CFG_PROD_DATA but not itself */ - pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */ - data_len = pda_len - 4; - data = pda + 2; - } - - /* Open auxiliary port */ - ret = hermes_aux_control(hw, 1); - printk(KERN_DEBUG PFX "AUX enable returned %d\n", ret); - if (ret) - return ret; - - /* read PDA from EEPROM */ - hermes_aux_setaddr(hw, pda_addr); - hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2); - - /* Close aux port */ - ret = hermes_aux_control(hw, 0); - printk(KERN_DEBUG PFX "AUX disable returned %d\n", ret); - - /* Check PDA length */ - pda_size = le16_to_cpu(pda[0]); - printk(KERN_DEBUG PFX "Actual PDA length %d, Max allowed %d\n", - pda_size, pda_len); - if (pda_size > pda_len) - return -EINVAL; - - return 0; -} -EXPORT_SYMBOL(hermes_read_pda); - /* Parse PDA and write the records into the adapter * * Attempt to write every records that is in the specified pda * which also has a valid production data record for the firmware. */ -int hermes_apply_pda(hermes_t *hw, +int hermes_apply_pda(struct hermes *hw, const char *first_pdr, - const __le16 *pda) + const void *pdr_end, + const __le16 *pda, + const void *pda_end) { int ret; const struct pdi *pdi; - struct pdr *pdr; + const struct pdr *pdr; - pdr = (struct pdr *) first_pdr; + pdr = (const struct pdr *) first_pdr; + pda_end -= sizeof(struct pdi); /* Go through every PDI and plug them into the adapter */ pdi = (const struct pdi *) (pda + 2); - while (pdi_id(pdi) != PDI_END) { - ret = hermes_plug_pdi(hw, pdr, pdi); + while (((void *) pdi <= pda_end) && + (pdi_id(pdi) != PDI_END)) { + ret = hermes_plug_pdi(hw, pdr, pdi, pdr_end); if (ret) return ret; @@ -376,21 +246,23 @@ int hermes_apply_pda(hermes_t *hw, } return 0; } -EXPORT_SYMBOL(hermes_apply_pda); /* Identify the total number of bytes in all blocks * including the header data. */ size_t -hermes_blocks_length(const char *first_block) +hermes_blocks_length(const char *first_block, const void *end) { const struct dblock *blk = (const struct dblock *) first_block; int total_len = 0; int len; + end -= sizeof(*blk); + /* Skip all blocks to locate Plug Data References * (Spectrum CS) */ - while (dblock_addr(blk) != BLOCK_END) { + while (((void *) blk <= end) && + (dblock_addr(blk) != BLOCK_END)) { len = dblock_len(blk); total_len += sizeof(*blk) + len; blk = (struct dblock *) &blk->data[len]; @@ -398,172 +270,45 @@ hermes_blocks_length(const char *first_block) return total_len; } -EXPORT_SYMBOL(hermes_blocks_length); /*** Hermes programming ***/ -/* About to start programming data (Hermes I) - * offset is the entry point - * - * Spectrum_cs' Symbol fw does not require this - * wl_lkm Agere fw does - * Don't know about intersil - */ -int hermesi_program_init(hermes_t *hw, u32 offset) -{ - int err; - - /* Disable interrupts?*/ - /*hw->inten = 0x0;*/ - /*hermes_write_regn(hw, INTEN, 0);*/ - /*hermes_set_irqmask(hw, 0);*/ - - /* Acknowledge any outstanding command */ - hermes_write_regn(hw, EVACK, 0xFFFF); - - /* Using doicmd_wait rather than docmd_wait */ - err = hermes_doicmd_wait(hw, - 0x0100 | HERMES_CMD_INIT, - 0, 0, 0, NULL); - if (err) - return err; - - err = hermes_doicmd_wait(hw, - 0x0000 | HERMES_CMD_INIT, - 0, 0, 0, NULL); - if (err) - return err; - - err = hermes_aux_control(hw, 1); - printk(KERN_DEBUG PFX "AUX enable returned %d\n", err); - - if (err) - return err; - - printk(KERN_DEBUG PFX "Enabling volatile, EP 0x%08x\n", offset); - err = hermes_doicmd_wait(hw, - HERMES_PROGRAM_ENABLE_VOLATILE, - offset & 0xFFFFu, - offset >> 16, - 0, - NULL); - printk(KERN_DEBUG PFX "PROGRAM_ENABLE returned %d\n", - err); - - return err; -} -EXPORT_SYMBOL(hermesi_program_init); - -/* Done programming data (Hermes I) - * - * Spectrum_cs' Symbol fw does not require this - * wl_lkm Agere fw does - * Don't know about intersil - */ -int hermesi_program_end(hermes_t *hw) -{ - struct hermes_response resp; - int rc = 0; - int err; - - rc = hermes_docmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp); - - printk(KERN_DEBUG PFX "PROGRAM_DISABLE returned %d, " - "r0 0x%04x, r1 0x%04x, r2 0x%04x\n", - rc, resp.resp0, resp.resp1, resp.resp2); - - if ((rc == 0) && - ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD)) - rc = -EIO; - - err = hermes_aux_control(hw, 0); - printk(KERN_DEBUG PFX "AUX disable returned %d\n", err); - - /* Acknowledge any outstanding command */ - hermes_write_regn(hw, EVACK, 0xFFFF); - - /* Reinitialise, ignoring return */ - (void) hermes_doicmd_wait(hw, 0x0000 | HERMES_CMD_INIT, - 0, 0, 0, NULL); - - return rc ? rc : err; -} -EXPORT_SYMBOL(hermesi_program_end); - /* Program the data blocks */ -int hermes_program(hermes_t *hw, const char *first_block, const char *end) +int hermes_program(struct hermes *hw, const char *first_block, const void *end) { const struct dblock *blk; u32 blkaddr; u32 blklen; -#if LIMIT_PROGRAM_SIZE - u32 addr; - u32 len; -#endif + int err = 0; blk = (const struct dblock *) first_block; - if ((const char *) blk > (end - sizeof(*blk))) + if ((void *) blk > (end - sizeof(*blk))) return -EIO; blkaddr = dblock_addr(blk); blklen = dblock_len(blk); while ((blkaddr != BLOCK_END) && - (((const char *) blk + blklen) <= end)) { - printk(KERN_DEBUG PFX - "Programming block of length %d to address 0x%08x\n", - blklen, blkaddr); - -#if !LIMIT_PROGRAM_SIZE - /* wl_lkm driver splits this into writes of 2000 bytes */ - hermes_aux_setaddr(hw, blkaddr); - hermes_write_bytes(hw, HERMES_AUXDATA, blk->data, - blklen); -#else - len = (blklen < MAX_DL_SIZE) ? blklen : MAX_DL_SIZE; - addr = blkaddr; - - while (addr < (blkaddr + blklen)) { - printk(KERN_DEBUG PFX - "Programming subblock of length %d " - "to address 0x%08x. Data @ %p\n", - len, addr, &blk->data[addr - blkaddr]); - - hermes_aux_setaddr(hw, addr); - hermes_write_bytes(hw, HERMES_AUXDATA, - &blk->data[addr - blkaddr], - len); - - addr += len; - len = ((blkaddr + blklen - addr) < MAX_DL_SIZE) ? - (blkaddr + blklen - addr) : MAX_DL_SIZE; - } -#endif + (((void *) blk + blklen) <= end)) { + pr_debug(PFX "Programming block of length %d " + "to address 0x%08x\n", blklen, blkaddr); + + err = hw->ops->program(hw, blk->data, blkaddr, blklen); + if (err) + break; + blk = (const struct dblock *) &blk->data[blklen]; - if ((const char *) blk > (end - sizeof(*blk))) + if ((void *) blk > (end - sizeof(*blk))) return -EIO; blkaddr = dblock_addr(blk); blklen = dblock_len(blk); } - return 0; -} -EXPORT_SYMBOL(hermes_program); - -static int __init init_hermes_dld(void) -{ - return 0; -} - -static void __exit exit_hermes_dld(void) -{ + return err; } -module_init(init_hermes_dld); -module_exit(exit_hermes_dld); - /*** Default plugging data for Hermes I ***/ /* Values from wl_lkm_718/hcf/dhf.c */ @@ -572,16 +317,16 @@ static const struct { \ __le16 len; \ __le16 id; \ u8 val[length]; \ -} __attribute__ ((packed)) default_pdr_data_##pid = { \ - __constant_cpu_to_le16((sizeof(default_pdr_data_##pid)/ \ +} __packed default_pdr_data_##pid = { \ + cpu_to_le16((sizeof(default_pdr_data_##pid)/ \ sizeof(__le16)) - 1), \ - __constant_cpu_to_le16(pid), \ + cpu_to_le16(pid), \ data \ } #define DEFAULT_PDR(pid) default_pdr_data_##pid -/* HWIF Compatiblity */ +/* HWIF Compatibility */ DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00"); /* PPPPSign */ @@ -642,19 +387,22 @@ DEFINE_DEFAULT_PDR(0x0161, 256, * * For certain records, use defaults if they are not found in pda. */ -int hermes_apply_pda_with_defaults(hermes_t *hw, +int hermes_apply_pda_with_defaults(struct hermes *hw, const char *first_pdr, - const __le16 *pda) + const void *pdr_end, + const __le16 *pda, + const void *pda_end) { const struct pdr *pdr = (const struct pdr *) first_pdr; - struct pdi *first_pdi = (struct pdi *) &pda[2]; - struct pdi *pdi; - struct pdi *default_pdi = NULL; - struct pdi *outdoor_pdi; - void *end = (void *)first_pdr + MAX_PDA_SIZE; + const struct pdi *first_pdi = (const struct pdi *) &pda[2]; + const struct pdi *pdi; + const struct pdi *default_pdi = NULL; + const struct pdi *outdoor_pdi; int record_id; - while (((void *)pdr < end) && + pdr_end -= sizeof(struct pdr); + + while (((void *) pdr <= pdr_end) && (pdr_id(pdr) != PDI_END)) { /* * For spectrum_cs firmwares, @@ -666,24 +414,25 @@ int hermes_apply_pda_with_defaults(hermes_t *hw, break; record_id = pdr_id(pdr); - pdi = hermes_find_pdi(first_pdi, record_id); + pdi = hermes_find_pdi(first_pdi, record_id, pda_end); if (pdi) - printk(KERN_DEBUG PFX "Found record 0x%04x at %p\n", - record_id, pdi); + pr_debug(PFX "Found record 0x%04x at %p\n", + record_id, pdi); switch (record_id) { case 0x110: /* Modem REFDAC values */ case 0x120: /* Modem VGDAC values */ - outdoor_pdi = hermes_find_pdi(first_pdi, record_id + 1); + outdoor_pdi = hermes_find_pdi(first_pdi, record_id + 1, + pda_end); default_pdi = NULL; if (outdoor_pdi) { pdi = outdoor_pdi; - printk(KERN_DEBUG PFX - "Using outdoor record 0x%04x at %p\n", - record_id + 1, pdi); + pr_debug(PFX + "Using outdoor record 0x%04x at %p\n", + record_id + 1, pdi); } break; - case 0x5: /* HWIF Compatiblity */ + case 0x5: /* HWIF Compatibility */ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005); break; case 0x108: /* PPPPSign */ @@ -708,18 +457,17 @@ int hermes_apply_pda_with_defaults(hermes_t *hw, if (!pdi && default_pdi) { /* Use default */ pdi = default_pdi; - printk(KERN_DEBUG PFX - "Using default record 0x%04x at %p\n", - record_id, pdi); + pr_debug(PFX "Using default record 0x%04x at %p\n", + record_id, pdi); } if (pdi) { /* Lengths of the data in PDI and PDR must match */ - if (pdi_len(pdi) == pdr_len(pdr)) { + if ((pdi_len(pdi) == pdr_len(pdr)) && + ((void *) pdi->data + pdi_len(pdi) < pda_end)) { /* do the actual plugging */ - hermes_aux_setaddr(hw, pdr_addr(pdr)); - hermes_write_bytes(hw, HERMES_AUXDATA, - pdi->data, pdi_len(pdi)); + hw->ops->program(hw, pdi->data, pdr_addr(pdr), + pdi_len(pdi)); } } @@ -727,4 +475,3 @@ int hermes_apply_pda_with_defaults(hermes_t *hw, } return 0; } -EXPORT_SYMBOL(hermes_apply_pda_with_defaults); diff --git a/drivers/net/wireless/orinoco/hermes_dld.h b/drivers/net/wireless/orinoco/hermes_dld.h index 6fcb2627799..b5377e232c6 100644 --- a/drivers/net/wireless/orinoco/hermes_dld.h +++ b/drivers/net/wireless/orinoco/hermes_dld.h @@ -27,22 +27,26 @@ #include "hermes.h" -int hermesi_program_init(hermes_t *hw, u32 offset); -int hermesi_program_end(hermes_t *hw); -int hermes_program(hermes_t *hw, const char *first_block, const char *end); +int hermesi_program_init(struct hermes *hw, u32 offset); +int hermesi_program_end(struct hermes *hw); +int hermes_program(struct hermes *hw, const char *first_block, const void *end); -int hermes_read_pda(hermes_t *hw, +int hermes_read_pda(struct hermes *hw, __le16 *pda, u32 pda_addr, u16 pda_len, int use_eeprom); -int hermes_apply_pda(hermes_t *hw, +int hermes_apply_pda(struct hermes *hw, const char *first_pdr, - const __le16 *pda); -int hermes_apply_pda_with_defaults(hermes_t *hw, + const void *pdr_end, + const __le16 *pda, + const void *pda_end); +int hermes_apply_pda_with_defaults(struct hermes *hw, const char *first_pdr, - const __le16 *pda); + const void *pdr_end, + const __le16 *pda, + const void *pda_end); -size_t hermes_blocks_length(const char *first_block); +size_t hermes_blocks_length(const char *first_block, const void *end); #endif /* _HERMES_DLD_H */ diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c new file mode 100644 index 00000000000..e27e32851f1 --- /dev/null +++ b/drivers/net/wireless/orinoco/hw.c @@ -0,0 +1,1356 @@ +/* Encapsulate basic setting changes and retrieval on Hermes hardware + * + * See copyright notice in main.c + */ +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/if_arp.h> +#include <linux/ieee80211.h> +#include <linux/wireless.h> +#include <net/cfg80211.h> +#include "hermes.h" +#include "hermes_rid.h" +#include "orinoco.h" + +#include "hw.h" + +#define SYMBOL_MAX_VER_LEN (14) + +/* Symbol firmware has a bug allocating buffers larger than this */ +#define TX_NICBUF_SIZE_BUG 1585 + +/********************************************************************/ +/* Data tables */ +/********************************************************************/ + +/* This tables gives the actual meanings of the bitrate IDs returned + * by the firmware. */ +static const struct { + int bitrate; /* in 100s of kilobits */ + int automatic; + u16 agere_txratectrl; + u16 intersil_txratectrl; +} bitrate_table[] = { + {110, 1, 3, 15}, /* Entry 0 is the default */ + {10, 0, 1, 1}, + {10, 1, 1, 1}, + {20, 0, 2, 2}, + {20, 1, 6, 3}, + {55, 0, 4, 4}, + {55, 1, 7, 7}, + {110, 0, 5, 8}, +}; +#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table) + +/* Firmware version encoding */ +struct comp_id { + u16 id, variant, major, minor; +} __packed; + +static inline enum fwtype determine_firmware_type(struct comp_id *nic_id) +{ + if (nic_id->id < 0x8000) + return FIRMWARE_TYPE_AGERE; + else if (nic_id->id == 0x8000 && nic_id->major == 0) + return FIRMWARE_TYPE_SYMBOL; + else + return FIRMWARE_TYPE_INTERSIL; +} + +/* Set priv->firmware type, determine firmware properties + * This function can be called before we have registerred with netdev, + * so all errors go out with dev_* rather than printk + * + * If non-NULL stores a firmware description in fw_name. + * If non-NULL stores a HW version in hw_ver + * + * These are output via generic cfg80211 ethtool support. + */ +int determine_fw_capabilities(struct orinoco_private *priv, + char *fw_name, size_t fw_name_len, + u32 *hw_ver) +{ + struct device *dev = priv->dev; + struct hermes *hw = &priv->hw; + int err; + struct comp_id nic_id, sta_id; + unsigned int firmver; + char tmp[SYMBOL_MAX_VER_LEN + 1] __attribute__((aligned(2))); + + /* Get the hardware version */ + err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id); + if (err) { + dev_err(dev, "Cannot read hardware identity: error %d\n", + err); + return err; + } + + le16_to_cpus(&nic_id.id); + le16_to_cpus(&nic_id.variant); + le16_to_cpus(&nic_id.major); + le16_to_cpus(&nic_id.minor); + dev_info(dev, "Hardware identity %04x:%04x:%04x:%04x\n", + nic_id.id, nic_id.variant, nic_id.major, nic_id.minor); + + if (hw_ver) + *hw_ver = (((nic_id.id & 0xff) << 24) | + ((nic_id.variant & 0xff) << 16) | + ((nic_id.major & 0xff) << 8) | + (nic_id.minor & 0xff)); + + priv->firmware_type = determine_firmware_type(&nic_id); + + /* Get the firmware version */ + err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id); + if (err) { + dev_err(dev, "Cannot read station identity: error %d\n", + err); + return err; + } + + le16_to_cpus(&sta_id.id); + le16_to_cpus(&sta_id.variant); + le16_to_cpus(&sta_id.major); + le16_to_cpus(&sta_id.minor); + dev_info(dev, "Station identity %04x:%04x:%04x:%04x\n", + sta_id.id, sta_id.variant, sta_id.major, sta_id.minor); + + switch (sta_id.id) { + case 0x15: + dev_err(dev, "Primary firmware is active\n"); + return -ENODEV; + case 0x14b: + dev_err(dev, "Tertiary firmware is active\n"); + return -ENODEV; + case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */ + case 0x21: /* Symbol Spectrum24 Trilogy */ + break; + default: + dev_notice(dev, "Unknown station ID, please report\n"); + break; + } + + /* Default capabilities */ + priv->has_sensitivity = 1; + priv->has_mwo = 0; + priv->has_preamble = 0; + priv->has_port3 = 1; + priv->has_ibss = 1; + priv->has_wep = 0; + priv->has_big_wep = 0; + priv->has_alt_txcntl = 0; + priv->has_ext_scan = 0; + priv->has_wpa = 0; + priv->do_fw_download = 0; + + /* Determine capabilities from the firmware version */ + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout, + ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */ + if (fw_name) + snprintf(fw_name, fw_name_len, "Lucent/Agere %d.%02d", + sta_id.major, sta_id.minor); + + firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor; + + priv->has_ibss = (firmver >= 0x60006); + priv->has_wep = (firmver >= 0x40020); + priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell + Gold cards from the others? */ + priv->has_mwo = (firmver >= 0x60000); + priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ + priv->ibss_port = 1; + priv->has_hostscan = (firmver >= 0x8000a); + priv->do_fw_download = 1; + priv->broken_monitor = (firmver >= 0x80000); + priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */ + priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */ + priv->has_wpa = (firmver >= 0x9002a); + /* Tested with Agere firmware : + * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II + * Tested CableTron firmware : 4.32 => Anton */ + break; + case FIRMWARE_TYPE_SYMBOL: + /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */ + /* Intel MAC : 00:02:B3:* */ + /* 3Com MAC : 00:50:DA:* */ + memset(tmp, 0, sizeof(tmp)); + /* Get the Symbol firmware version */ + err = hw->ops->read_ltv(hw, USER_BAP, + HERMES_RID_SECONDARYVERSION_SYMBOL, + SYMBOL_MAX_VER_LEN, NULL, &tmp); + if (err) { + dev_warn(dev, "Error %d reading Symbol firmware info. " + "Wildly guessing capabilities...\n", err); + firmver = 0; + tmp[0] = '\0'; + } else { + /* The firmware revision is a string, the format is + * something like : "V2.20-01". + * Quick and dirty parsing... - Jean II + */ + firmver = ((tmp[1] - '0') << 16) + | ((tmp[3] - '0') << 12) + | ((tmp[4] - '0') << 8) + | ((tmp[6] - '0') << 4) + | (tmp[7] - '0'); + + tmp[SYMBOL_MAX_VER_LEN] = '\0'; + } + + if (fw_name) + snprintf(fw_name, fw_name_len, "Symbol %s", tmp); + + priv->has_ibss = (firmver >= 0x20000); + priv->has_wep = (firmver >= 0x15012); + priv->has_big_wep = (firmver >= 0x20000); + priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) || + (firmver >= 0x29000 && firmver < 0x30000) || + firmver >= 0x31000; + priv->has_preamble = (firmver >= 0x20000); + priv->ibss_port = 4; + + /* Symbol firmware is found on various cards, but + * there has been no attempt to check firmware + * download on non-spectrum_cs based cards. + * + * Given that the Agere firmware download works + * differently, we should avoid doing a firmware + * download with the Symbol algorithm on non-spectrum + * cards. + * + * For now we can identify a spectrum_cs based card + * because it has a firmware reset function. + */ + priv->do_fw_download = (priv->stop_fw != NULL); + + priv->broken_disableport = (firmver == 0x25013) || + (firmver >= 0x30000 && firmver <= 0x31000); + priv->has_hostscan = (firmver >= 0x31001) || + (firmver >= 0x29057 && firmver < 0x30000); + /* Tested with Intel firmware : 0x20015 => Jean II */ + /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ + break; + case FIRMWARE_TYPE_INTERSIL: + /* D-Link, Linksys, Adtron, ZoomAir, and many others... + * Samsung, Compaq 100/200 and Proxim are slightly + * different and less well tested */ + /* D-Link MAC : 00:40:05:* */ + /* Addtron MAC : 00:90:D1:* */ + if (fw_name) + snprintf(fw_name, fw_name_len, "Intersil %d.%d.%d", + sta_id.major, sta_id.minor, sta_id.variant); + + firmver = ((unsigned long)sta_id.major << 16) | + ((unsigned long)sta_id.minor << 8) | sta_id.variant; + + priv->has_ibss = (firmver >= 0x000700); /* FIXME */ + priv->has_big_wep = priv->has_wep = (firmver >= 0x000800); + priv->has_pm = (firmver >= 0x000700); + priv->has_hostscan = (firmver >= 0x010301); + + if (firmver >= 0x000800) + priv->ibss_port = 0; + else { + dev_notice(dev, "Intersil firmware earlier than v0.8.x" + " - several features not supported\n"); + priv->ibss_port = 1; + } + break; + } + if (fw_name) + dev_info(dev, "Firmware determined as %s\n", fw_name); + +#ifndef CONFIG_HERMES_PRISM + if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL) { + dev_err(dev, "Support for Prism chipset is not enabled\n"); + return -ENODEV; + } +#endif + + return 0; +} + +/* Read settings from EEPROM into our private structure. + * MAC address gets dropped into callers buffer + * Can be called before netdev registration. + */ +int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr) +{ + struct device *dev = priv->dev; + struct hermes_idstring nickbuf; + struct hermes *hw = &priv->hw; + int len; + int err; + u16 reclen; + + /* Get the MAC address */ + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, + ETH_ALEN, NULL, dev_addr); + if (err) { + dev_warn(dev, "Failed to read MAC address!\n"); + goto out; + } + + dev_dbg(dev, "MAC address %pM\n", dev_addr); + + /* Get the station name */ + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, + sizeof(nickbuf), &reclen, &nickbuf); + if (err) { + dev_err(dev, "failed to read station name\n"); + goto out; + } + if (nickbuf.len) + len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len)); + else + len = min(IW_ESSID_MAX_SIZE, 2 * reclen); + memcpy(priv->nick, &nickbuf.val, len); + priv->nick[len] = '\0'; + + dev_dbg(dev, "Station name \"%s\"\n", priv->nick); + + /* Get allowed channels */ + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST, + &priv->channel_mask); + if (err) { + dev_err(dev, "Failed to read channel list!\n"); + goto out; + } + + /* Get initial AP density */ + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE, + &priv->ap_density); + if (err || priv->ap_density < 1 || priv->ap_density > 3) + priv->has_sensitivity = 0; + + /* Get initial RTS threshold */ + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, + &priv->rts_thresh); + if (err) { + dev_err(dev, "Failed to read RTS threshold!\n"); + goto out; + } + + /* Get initial fragmentation settings */ + if (priv->has_mwo) + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMWOROBUST_AGERE, + &priv->mwo_robust); + else + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, + &priv->frag_thresh); + if (err) { + dev_err(dev, "Failed to read fragmentation settings!\n"); + goto out; + } + + /* Power management setup */ + if (priv->has_pm) { + priv->pm_on = 0; + priv->pm_mcast = 1; + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMAXSLEEPDURATION, + &priv->pm_period); + if (err) { + dev_err(dev, "Failed to read power management " + "period!\n"); + goto out; + } + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMHOLDOVERDURATION, + &priv->pm_timeout); + if (err) { + dev_err(dev, "Failed to read power management " + "timeout!\n"); + goto out; + } + } + + /* Preamble setup */ + if (priv->has_preamble) { + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFPREAMBLE_SYMBOL, + &priv->preamble); + if (err) { + dev_err(dev, "Failed to read preamble setup\n"); + goto out; + } + } + + /* Retry settings */ + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT, + &priv->short_retry_limit); + if (err) { + dev_err(dev, "Failed to read short retry limit\n"); + goto out; + } + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT, + &priv->long_retry_limit); + if (err) { + dev_err(dev, "Failed to read long retry limit\n"); + goto out; + } + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME, + &priv->retry_lifetime); + if (err) { + dev_err(dev, "Failed to read max retry lifetime\n"); + goto out; + } + +out: + return err; +} + +/* Can be called before netdev registration */ +int orinoco_hw_allocate_fid(struct orinoco_private *priv) +{ + struct device *dev = priv->dev; + struct hermes *hw = &priv->hw; + int err; + + err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid); + if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) { + /* Try workaround for old Symbol firmware bug */ + priv->nicbuf_size = TX_NICBUF_SIZE_BUG; + err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid); + + dev_warn(dev, "Firmware ALLOC bug detected " + "(old Symbol firmware?). Work around %s\n", + err ? "failed!" : "ok."); + } + + return err; +} + +int orinoco_get_bitratemode(int bitrate, int automatic) +{ + int ratemode = -1; + int i; + + if ((bitrate != 10) && (bitrate != 20) && + (bitrate != 55) && (bitrate != 110)) + return ratemode; + + for (i = 0; i < BITRATE_TABLE_SIZE; i++) { + if ((bitrate_table[i].bitrate == bitrate) && + (bitrate_table[i].automatic == automatic)) { + ratemode = i; + break; + } + } + return ratemode; +} + +void orinoco_get_ratemode_cfg(int ratemode, int *bitrate, int *automatic) +{ + BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE)); + + *bitrate = bitrate_table[ratemode].bitrate * 100000; + *automatic = bitrate_table[ratemode].automatic; +} + +int orinoco_hw_program_rids(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct wireless_dev *wdev = netdev_priv(dev); + struct hermes *hw = &priv->hw; + int err; + struct hermes_idstring idbuf; + + /* Set the MAC address */ + err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, + HERMES_BYTES_TO_RECLEN(ETH_ALEN), + dev->dev_addr); + if (err) { + printk(KERN_ERR "%s: Error %d setting MAC address\n", + dev->name, err); + return err; + } + + /* Set up the link mode */ + err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE, + priv->port_type); + if (err) { + printk(KERN_ERR "%s: Error %d setting port type\n", + dev->name, err); + return err; + } + /* Set the channel/frequency */ + if (priv->channel != 0 && priv->iw_mode != NL80211_IFTYPE_STATION) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFOWNCHANNEL, + priv->channel); + if (err) { + printk(KERN_ERR "%s: Error %d setting channel %d\n", + dev->name, err, priv->channel); + return err; + } + } + + if (priv->has_ibss) { + u16 createibss; + + if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) { + printk(KERN_WARNING "%s: This firmware requires an " + "ESSID in IBSS-Ad-Hoc mode.\n", dev->name); + /* With wvlan_cs, in this case, we would crash. + * hopefully, this driver will behave better... + * Jean II */ + createibss = 0; + } else { + createibss = priv->createibss; + } + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFCREATEIBSS, + createibss); + if (err) { + printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", + dev->name, err); + return err; + } + } + + /* Set the desired BSSID */ + err = __orinoco_hw_set_wap(priv); + if (err) { + printk(KERN_ERR "%s: Error %d setting AP address\n", + dev->name, err); + return err; + } + + /* Set the desired ESSID */ + idbuf.len = cpu_to_le16(strlen(priv->desired_essid)); + memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val)); + /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */ + err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID, + HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid) + 2), + &idbuf); + if (err) { + printk(KERN_ERR "%s: Error %d setting OWNSSID\n", + dev->name, err); + return err; + } + err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID, + HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid) + 2), + &idbuf); + if (err) { + printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n", + dev->name, err); + return err; + } + + /* Set the station name */ + idbuf.len = cpu_to_le16(strlen(priv->nick)); + memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val)); + err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, + HERMES_BYTES_TO_RECLEN(strlen(priv->nick) + 2), + &idbuf); + if (err) { + printk(KERN_ERR "%s: Error %d setting nickname\n", + dev->name, err); + return err; + } + + /* Set AP density */ + if (priv->has_sensitivity) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSYSTEMSCALE, + priv->ap_density); + if (err) { + printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. " + "Disabling sensitivity control\n", + dev->name, err); + + priv->has_sensitivity = 0; + } + } + + /* Set RTS threshold */ + err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, + priv->rts_thresh); + if (err) { + printk(KERN_ERR "%s: Error %d setting RTS threshold\n", + dev->name, err); + return err; + } + + /* Set fragmentation threshold or MWO robustness */ + if (priv->has_mwo) + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFMWOROBUST_AGERE, + priv->mwo_robust); + else + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, + priv->frag_thresh); + if (err) { + printk(KERN_ERR "%s: Error %d setting fragmentation\n", + dev->name, err); + return err; + } + + /* Set bitrate */ + err = __orinoco_hw_set_bitrate(priv); + if (err) { + printk(KERN_ERR "%s: Error %d setting bitrate\n", + dev->name, err); + return err; + } + + /* Set power management */ + if (priv->has_pm) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMENABLED, + priv->pm_on); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFMULTICASTRECEIVE, + priv->pm_mcast); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFMAXSLEEPDURATION, + priv->pm_period); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMHOLDOVERDURATION, + priv->pm_timeout); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + } + + /* Set preamble - only for Symbol so far... */ + if (priv->has_preamble) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPREAMBLE_SYMBOL, + priv->preamble); + if (err) { + printk(KERN_ERR "%s: Error %d setting preamble\n", + dev->name, err); + return err; + } + } + + /* Set up encryption */ + if (priv->has_wep || priv->has_wpa) { + err = __orinoco_hw_setup_enc(priv); + if (err) { + printk(KERN_ERR "%s: Error %d activating encryption\n", + dev->name, err); + return err; + } + } + + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { + /* Enable monitor mode */ + dev->type = ARPHRD_IEEE80211; + err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | + HERMES_TEST_MONITOR, 0, NULL); + } else { + /* Disable monitor mode */ + dev->type = ARPHRD_ETHER; + err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | + HERMES_TEST_STOP, 0, NULL); + } + if (err) + return err; + + /* Reset promiscuity / multicast*/ + priv->promiscuous = 0; + priv->mc_count = 0; + + /* Record mode change */ + wdev->iftype = priv->iw_mode; + + return 0; +} + +/* Get tsc from the firmware */ +int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc) +{ + struct hermes *hw = &priv->hw; + int err = 0; + u8 tsc_arr[4][ORINOCO_SEQ_LEN]; + + if ((key < 0) || (key >= 4)) + return -EINVAL; + + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV, + sizeof(tsc_arr), NULL, &tsc_arr); + if (!err) + memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0])); + + return err; +} + +int __orinoco_hw_set_bitrate(struct orinoco_private *priv) +{ + struct hermes *hw = &priv->hw; + int ratemode = priv->bitratemode; + int err = 0; + + if (ratemode >= BITRATE_TABLE_SIZE) { + printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n", + priv->ndev->name, ratemode); + return -EINVAL; + } + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFTXRATECONTROL, + bitrate_table[ratemode].agere_txratectrl); + break; + case FIRMWARE_TYPE_INTERSIL: + case FIRMWARE_TYPE_SYMBOL: + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFTXRATECONTROL, + bitrate_table[ratemode].intersil_txratectrl); + break; + default: + BUG(); + } + + return err; +} + +int orinoco_hw_get_act_bitrate(struct orinoco_private *priv, int *bitrate) +{ + struct hermes *hw = &priv->hw; + int i; + int err = 0; + u16 val; + + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CURRENTTXRATE, &val); + if (err) + return err; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: /* Lucent style rate */ + /* Note : in Lucent firmware, the return value of + * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s, + * and therefore is totally different from the + * encoding of HERMES_RID_CNFTXRATECONTROL. + * Don't forget that 6Mb/s is really 5.5Mb/s */ + if (val == 6) + *bitrate = 5500000; + else + *bitrate = val * 1000000; + break; + case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */ + case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */ + for (i = 0; i < BITRATE_TABLE_SIZE; i++) + if (bitrate_table[i].intersil_txratectrl == val) { + *bitrate = bitrate_table[i].bitrate * 100000; + break; + } + + if (i >= BITRATE_TABLE_SIZE) { + printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n", + priv->ndev->name, val); + err = -EIO; + } + + break; + default: + BUG(); + } + + return err; +} + +/* Set fixed AP address */ +int __orinoco_hw_set_wap(struct orinoco_private *priv) +{ + int roaming_flag; + int err = 0; + struct hermes *hw = &priv->hw; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + /* not supported */ + break; + case FIRMWARE_TYPE_INTERSIL: + if (priv->bssid_fixed) + roaming_flag = 2; + else + roaming_flag = 1; + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFROAMINGMODE, + roaming_flag); + break; + case FIRMWARE_TYPE_SYMBOL: + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFMANDATORYBSSID_SYMBOL, + &priv->desired_bssid); + break; + } + return err; +} + +/* Change the WEP keys and/or the current keys. Can be called + * either from __orinoco_hw_setup_enc() or directly from + * orinoco_ioctl_setiwencode(). In the later case the association + * with the AP is not broken (if the firmware can handle it), + * which is needed for 802.1x implementations. */ +int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) +{ + struct hermes *hw = &priv->hw; + int err = 0; + int i; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + { + struct orinoco_key keys[ORINOCO_MAX_KEYS]; + + memset(&keys, 0, sizeof(keys)); + for (i = 0; i < ORINOCO_MAX_KEYS; i++) { + int len = min(priv->keys[i].key_len, + ORINOCO_MAX_KEY_SIZE); + memcpy(&keys[i].data, priv->keys[i].key, len); + if (len > SMALL_KEY_SIZE) + keys[i].len = cpu_to_le16(LARGE_KEY_SIZE); + else if (len > 0) + keys[i].len = cpu_to_le16(SMALL_KEY_SIZE); + else + keys[i].len = cpu_to_le16(0); + } + + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFWEPKEYS_AGERE, + &keys); + if (err) + return err; + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFTXKEY_AGERE, + priv->tx_key); + if (err) + return err; + break; + } + case FIRMWARE_TYPE_INTERSIL: + case FIRMWARE_TYPE_SYMBOL: + { + int keylen; + + /* Force uniform key length to work around + * firmware bugs */ + keylen = priv->keys[priv->tx_key].key_len; + + if (keylen > LARGE_KEY_SIZE) { + printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n", + priv->ndev->name, priv->tx_key, keylen); + return -E2BIG; + } else if (keylen > SMALL_KEY_SIZE) + keylen = LARGE_KEY_SIZE; + else if (keylen > 0) + keylen = SMALL_KEY_SIZE; + else + keylen = 0; + + /* Write all 4 keys */ + for (i = 0; i < ORINOCO_MAX_KEYS; i++) { + u8 key[LARGE_KEY_SIZE] = { 0 }; + + memcpy(key, priv->keys[i].key, + priv->keys[i].key_len); + + err = hw->ops->write_ltv(hw, USER_BAP, + HERMES_RID_CNFDEFAULTKEY0 + i, + HERMES_BYTES_TO_RECLEN(keylen), + key); + if (err) + return err; + } + + /* Write the index of the key used in transmission */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFWEPDEFAULTKEYID, + priv->tx_key); + if (err) + return err; + } + break; + } + + return 0; +} + +int __orinoco_hw_setup_enc(struct orinoco_private *priv) +{ + struct hermes *hw = &priv->hw; + int err = 0; + int master_wep_flag; + int auth_flag; + int enc_flag; + + /* Setup WEP keys */ + if (priv->encode_alg == ORINOCO_ALG_WEP) + __orinoco_hw_setup_wepkeys(priv); + + if (priv->wep_restrict) + auth_flag = HERMES_AUTH_SHARED_KEY; + else + auth_flag = HERMES_AUTH_OPEN; + + if (priv->wpa_enabled) + enc_flag = 2; + else if (priv->encode_alg == ORINOCO_ALG_WEP) + enc_flag = 1; + else + enc_flag = 0; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: /* Agere style WEP */ + if (priv->encode_alg == ORINOCO_ALG_WEP) { + /* Enable the shared-key authentication. */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFAUTHENTICATION_AGERE, + auth_flag); + } + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFWEPENABLED_AGERE, + enc_flag); + if (err) + return err; + + if (priv->has_wpa) { + /* Set WPA key management */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE, + priv->key_mgmt); + if (err) + return err; + } + + break; + + case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */ + case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */ + if (priv->encode_alg == ORINOCO_ALG_WEP) { + if (priv->wep_restrict || + (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)) + master_wep_flag = HERMES_WEP_PRIVACY_INVOKED | + HERMES_WEP_EXCL_UNENCRYPTED; + else + master_wep_flag = HERMES_WEP_PRIVACY_INVOKED; + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFAUTHENTICATION, + auth_flag); + if (err) + return err; + } else + master_wep_flag = 0; + + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) + master_wep_flag |= HERMES_WEP_HOST_DECRYPT; + + /* Master WEP setting : on/off */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFWEPFLAGS_INTERSIL, + master_wep_flag); + if (err) + return err; + + break; + } + + return 0; +} + +/* key must be 32 bytes, including the tx and rx MIC keys. + * rsc must be NULL or up to 8 bytes + * tsc must be NULL or up to 8 bytes + */ +int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx, + int set_tx, const u8 *key, const u8 *rsc, + size_t rsc_len, const u8 *tsc, size_t tsc_len) +{ + struct { + __le16 idx; + u8 rsc[ORINOCO_SEQ_LEN]; + u8 key[TKIP_KEYLEN]; + u8 tx_mic[MIC_KEYLEN]; + u8 rx_mic[MIC_KEYLEN]; + u8 tsc[ORINOCO_SEQ_LEN]; + } __packed buf; + struct hermes *hw = &priv->hw; + int ret; + int err; + int k; + u16 xmitting; + + key_idx &= 0x3; + + if (set_tx) + key_idx |= 0x8000; + + buf.idx = cpu_to_le16(key_idx); + memcpy(buf.key, key, + sizeof(buf.key) + sizeof(buf.tx_mic) + sizeof(buf.rx_mic)); + + if (rsc_len > sizeof(buf.rsc)) + rsc_len = sizeof(buf.rsc); + + if (tsc_len > sizeof(buf.tsc)) + tsc_len = sizeof(buf.tsc); + + memset(buf.rsc, 0, sizeof(buf.rsc)); + memset(buf.tsc, 0, sizeof(buf.tsc)); + + if (rsc != NULL) + memcpy(buf.rsc, rsc, rsc_len); + + if (tsc != NULL) + memcpy(buf.tsc, tsc, tsc_len); + else + buf.tsc[4] = 0x10; + + /* Wait up to 100ms for tx queue to empty */ + for (k = 100; k > 0; k--) { + udelay(1000); + ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY, + &xmitting); + if (ret || !xmitting) + break; + } + + if (k == 0) + ret = -ETIMEDOUT; + + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE, + &buf); + + return ret ? ret : err; +} + +int orinoco_clear_tkip_key(struct orinoco_private *priv, int key_idx) +{ + struct hermes *hw = &priv->hw; + int err; + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE, + key_idx); + if (err) + printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n", + priv->ndev->name, err, key_idx); + return err; +} + +int __orinoco_hw_set_multicast_list(struct orinoco_private *priv, + struct net_device *dev, + int mc_count, int promisc) +{ + struct hermes *hw = &priv->hw; + int err = 0; + + if (promisc != priv->promiscuous) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPROMISCUOUSMODE, + promisc); + if (err) { + printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n", + priv->ndev->name, err); + } else + priv->promiscuous = promisc; + } + + /* If we're not in promiscuous mode, then we need to set the + * group address if either we want to multicast, or if we were + * multicasting and want to stop */ + if (!promisc && (mc_count || priv->mc_count)) { + struct netdev_hw_addr *ha; + struct hermes_multicast mclist; + int i = 0; + + netdev_for_each_mc_addr(ha, dev) { + if (i == mc_count) + break; + memcpy(mclist.addr[i++], ha->addr, ETH_ALEN); + } + + err = hw->ops->write_ltv(hw, USER_BAP, + HERMES_RID_CNFGROUPADDRESSES, + HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN), + &mclist); + if (err) + printk(KERN_ERR "%s: Error %d setting multicast list.\n", + priv->ndev->name, err); + else + priv->mc_count = mc_count; + } + return err; +} + +/* Return : < 0 -> error code ; >= 0 -> length */ +int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, + char buf[IW_ESSID_MAX_SIZE + 1]) +{ + struct hermes *hw = &priv->hw; + int err = 0; + struct hermes_idstring essidbuf; + char *p = (char *)(&essidbuf.val); + int len; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (strlen(priv->desired_essid) > 0) { + /* We read the desired SSID from the hardware rather + than from priv->desired_essid, just in case the + firmware is allowed to change it on us. I'm not + sure about this */ + /* My guess is that the OWNSSID should always be whatever + * we set to the card, whereas CURRENT_SSID is the one that + * may change... - Jean II */ + u16 rid; + + *active = 1; + + rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID : + HERMES_RID_CNFDESIREDSSID; + + err = hw->ops->read_ltv(hw, USER_BAP, rid, sizeof(essidbuf), + NULL, &essidbuf); + if (err) + goto fail_unlock; + } else { + *active = 0; + + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID, + sizeof(essidbuf), NULL, &essidbuf); + if (err) + goto fail_unlock; + } + + len = le16_to_cpu(essidbuf.len); + BUG_ON(len > IW_ESSID_MAX_SIZE); + + memset(buf, 0, IW_ESSID_MAX_SIZE); + memcpy(buf, p, len); + err = len; + + fail_unlock: + orinoco_unlock(priv, &flags); + + return err; +} + +int orinoco_hw_get_freq(struct orinoco_private *priv) +{ + struct hermes *hw = &priv->hw; + int err = 0; + u16 channel; + int freq = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, + &channel); + if (err) + goto out; + + /* Intersil firmware 1.3.5 returns 0 when the interface is down */ + if (channel == 0) { + err = -EBUSY; + goto out; + } + + if ((channel < 1) || (channel > NUM_CHANNELS)) { + printk(KERN_WARNING "%s: Channel out of range (%d)!\n", + priv->ndev->name, channel); + err = -EBUSY; + goto out; + + } + freq = ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); + + out: + orinoco_unlock(priv, &flags); + + if (err > 0) + err = -EBUSY; + return err ? err : freq; +} + +int orinoco_hw_get_bitratelist(struct orinoco_private *priv, + int *numrates, s32 *rates, int max) +{ + struct hermes *hw = &priv->hw; + struct hermes_idstring list; + unsigned char *p = (unsigned char *)&list.val; + int err = 0; + int num; + int i; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES, + sizeof(list), NULL, &list); + orinoco_unlock(priv, &flags); + + if (err) + return err; + + num = le16_to_cpu(list.len); + *numrates = num; + num = min(num, max); + + for (i = 0; i < num; i++) + rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */ + + return 0; +} + +int orinoco_hw_trigger_scan(struct orinoco_private *priv, + const struct cfg80211_ssid *ssid) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + unsigned long flags; + int err = 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* Scanning with port 0 disabled would fail */ + if (!netif_running(dev)) { + err = -ENETDOWN; + goto out; + } + + /* In monitor mode, the scan results are always empty. + * Probe responses are passed to the driver as received + * frames and could be processed in software. */ + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { + err = -EOPNOTSUPP; + goto out; + } + + if (priv->has_hostscan) { + switch (priv->firmware_type) { + case FIRMWARE_TYPE_SYMBOL: + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFHOSTSCAN_SYMBOL, + HERMES_HOSTSCAN_SYMBOL_ONCE | + HERMES_HOSTSCAN_SYMBOL_BCAST); + break; + case FIRMWARE_TYPE_INTERSIL: { + __le16 req[3]; + + req[0] = cpu_to_le16(0x3fff); /* All channels */ + req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */ + req[2] = 0; /* Any ESSID */ + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFHOSTSCAN, &req); + break; + } + case FIRMWARE_TYPE_AGERE: + if (ssid->ssid_len > 0) { + struct hermes_idstring idbuf; + size_t len = ssid->ssid_len; + + idbuf.len = cpu_to_le16(len); + memcpy(idbuf.val, ssid->ssid, len); + + err = hw->ops->write_ltv(hw, USER_BAP, + HERMES_RID_CNFSCANSSID_AGERE, + HERMES_BYTES_TO_RECLEN(len + 2), + &idbuf); + } else + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSCANSSID_AGERE, + 0); /* Any ESSID */ + if (err) + break; + + if (priv->has_ext_scan) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSCANCHANNELS2GHZ, + 0x7FFF); + if (err) + goto out; + + err = hermes_inquire(hw, + HERMES_INQ_CHANNELINFO); + } else + err = hermes_inquire(hw, HERMES_INQ_SCAN); + + break; + } + } else + err = hermes_inquire(hw, HERMES_INQ_SCAN); + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +/* Disassociate from node with BSSID addr */ +int orinoco_hw_disassociate(struct orinoco_private *priv, + u8 *addr, u16 reason_code) +{ + struct hermes *hw = &priv->hw; + int err; + + struct { + u8 addr[ETH_ALEN]; + __le16 reason_code; + } __packed buf; + + /* Currently only supported by WPA enabled Agere fw */ + if (!priv->has_wpa) + return -EOPNOTSUPP; + + memcpy(buf.addr, addr, ETH_ALEN); + buf.reason_code = cpu_to_le16(reason_code); + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFDISASSOCIATE, + &buf); + return err; +} + +int orinoco_hw_get_current_bssid(struct orinoco_private *priv, + u8 *addr) +{ + struct hermes *hw = &priv->hw; + int err; + + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, + ETH_ALEN, NULL, addr); + + return err; +} diff --git a/drivers/net/wireless/orinoco/hw.h b/drivers/net/wireless/orinoco/hw.h new file mode 100644 index 00000000000..466d1ede76f --- /dev/null +++ b/drivers/net/wireless/orinoco/hw.h @@ -0,0 +1,59 @@ +/* Encapsulate basic setting changes on Hermes hardware + * + * See copyright notice in main.c + */ +#ifndef _ORINOCO_HW_H_ +#define _ORINOCO_HW_H_ + +#include <linux/types.h> +#include <linux/wireless.h> +#include <net/cfg80211.h> + +/* Hardware BAPs */ +#define USER_BAP 0 +#define IRQ_BAP 1 + +/* WEP key sizes */ +#define SMALL_KEY_SIZE 5 +#define LARGE_KEY_SIZE 13 + +/* Number of supported channels */ +#define NUM_CHANNELS 14 + +/* Forward declarations */ +struct orinoco_private; + +int determine_fw_capabilities(struct orinoco_private *priv, char *fw_name, + size_t fw_name_len, u32 *hw_ver); +int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr); +int orinoco_hw_allocate_fid(struct orinoco_private *priv); +int orinoco_get_bitratemode(int bitrate, int automatic); +void orinoco_get_ratemode_cfg(int ratemode, int *bitrate, int *automatic); + +int orinoco_hw_program_rids(struct orinoco_private *priv); +int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc); +int __orinoco_hw_set_bitrate(struct orinoco_private *priv); +int orinoco_hw_get_act_bitrate(struct orinoco_private *priv, int *bitrate); +int __orinoco_hw_set_wap(struct orinoco_private *priv); +int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv); +int __orinoco_hw_setup_enc(struct orinoco_private *priv); +int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx, + int set_tx, const u8 *key, const u8 *rsc, + size_t rsc_len, const u8 *tsc, size_t tsc_len); +int orinoco_clear_tkip_key(struct orinoco_private *priv, int key_idx); +int __orinoco_hw_set_multicast_list(struct orinoco_private *priv, + struct net_device *dev, + int mc_count, int promisc); +int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, + char buf[IW_ESSID_MAX_SIZE + 1]); +int orinoco_hw_get_freq(struct orinoco_private *priv); +int orinoco_hw_get_bitratelist(struct orinoco_private *priv, + int *numrates, s32 *rates, int max); +int orinoco_hw_trigger_scan(struct orinoco_private *priv, + const struct cfg80211_ssid *ssid); +int orinoco_hw_disassociate(struct orinoco_private *priv, + u8 *addr, u16 reason_code); +int orinoco_hw_get_current_bssid(struct orinoco_private *priv, + u8 *addr); + +#endif /* _ORINOCO_HW_H_ */ diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c new file mode 100644 index 00000000000..38ec8d19ac2 --- /dev/null +++ b/drivers/net/wireless/orinoco/main.c @@ -0,0 +1,2431 @@ +/* main.c - (formerly known as dldwd_cs.c, orinoco_cs.c and orinoco.c) + * + * A driver for Hermes or Prism 2 chipset based PCMCIA wireless + * adaptors, with Lucent/Agere, Intersil or Symbol firmware. + * + * Current maintainers (as of 29 September 2003) are: + * Pavel Roskin <proski AT gnu.org> + * and David Gibson <hermes AT gibson.dropbear.id.au> + * + * (C) Copyright David Gibson, IBM Corporation 2001-2003. + * Copyright (C) 2000 David Gibson, Linuxcare Australia. + * With some help from : + * Copyright (C) 2001 Jean Tourrilhes, HP Labs + * Copyright (C) 2001 Benjamin Herrenschmidt + * + * Based on dummy_cs.c 1.27 2000/06/12 21:27:25 + * + * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy + * AT fasta.fh-dortmund.de> + * http://www.stud.fh-dortmund.de/~andy/wvlan/ + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * <dahinds AT users.sourceforge.net>. Portions created by David + * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights + * Reserved. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. */ + +/* + * TODO + * o Handle de-encapsulation within network layer, provide 802.11 + * headers (patch from Thomas 'Dent' Mirlacher) + * o Fix possible races in SPY handling. + * o Disconnect wireless extensions from fundamental configuration. + * o (maybe) Software WEP support (patch from Stano Meduna). + * o (maybe) Use multiple Tx buffers - driver handling queue + * rather than firmware. + */ + +/* Locking and synchronization: + * + * The basic principle is that everything is serialized through a + * single spinlock, priv->lock. The lock is used in user, bh and irq + * context, so when taken outside hardirq context it should always be + * taken with interrupts disabled. The lock protects both the + * hardware and the struct orinoco_private. + * + * Another flag, priv->hw_unavailable indicates that the hardware is + * unavailable for an extended period of time (e.g. suspended, or in + * the middle of a hard reset). This flag is protected by the + * spinlock. All code which touches the hardware should check the + * flag after taking the lock, and if it is set, give up on whatever + * they are doing and drop the lock again. The orinoco_lock() + * function handles this (it unlocks and returns -EBUSY if + * hw_unavailable is non-zero). + */ + +#define DRIVER_NAME "orinoco" + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/suspend.h> +#include <linux/if_arp.h> +#include <linux/wireless.h> +#include <linux/ieee80211.h> +#include <net/iw_handler.h> +#include <net/cfg80211.h> + +#include "hermes_rid.h" +#include "hermes_dld.h" +#include "hw.h" +#include "scan.h" +#include "mic.h" +#include "fw.h" +#include "wext.h" +#include "cfg.h" +#include "main.h" + +#include "orinoco.h" + +/********************************************************************/ +/* Module information */ +/********************************************************************/ + +MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & " + "David Gibson <hermes@gibson.dropbear.id.au>"); +MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based " + "and similar wireless cards"); +MODULE_LICENSE("Dual MPL/GPL"); + +/* Level of debugging. Used in the macros in orinoco.h */ +#ifdef ORINOCO_DEBUG +int orinoco_debug = ORINOCO_DEBUG; +EXPORT_SYMBOL(orinoco_debug); +module_param(orinoco_debug, int, 0644); +MODULE_PARM_DESC(orinoco_debug, "Debug level"); +#endif + +static bool suppress_linkstatus; /* = 0 */ +module_param(suppress_linkstatus, bool, 0644); +MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes"); + +static int ignore_disconnect; /* = 0 */ +module_param(ignore_disconnect, int, 0644); +MODULE_PARM_DESC(ignore_disconnect, + "Don't report lost link to the network layer"); + +int force_monitor; /* = 0 */ +module_param(force_monitor, int, 0644); +MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions"); + +/********************************************************************/ +/* Internal constants */ +/********************************************************************/ + +/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ +static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; +#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) + +#define ORINOCO_MIN_MTU 256 +#define ORINOCO_MAX_MTU (IEEE80211_MAX_DATA_LEN - ENCAPS_OVERHEAD) + +#define MAX_IRQLOOPS_PER_IRQ 10 +#define MAX_IRQLOOPS_PER_JIFFY (20000 / HZ) /* Based on a guestimate of + * how many events the + * device could + * legitimately generate */ + +#define DUMMY_FID 0xFFFF + +/*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \ + HERMES_MAX_MULTICAST : 0)*/ +#define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST) + +#define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \ + | HERMES_EV_TX | HERMES_EV_TXEXC \ + | HERMES_EV_WTERR | HERMES_EV_INFO \ + | HERMES_EV_INFDROP) + +/********************************************************************/ +/* Data types */ +/********************************************************************/ + +/* Beginning of the Tx descriptor, used in TxExc handling */ +struct hermes_txexc_data { + struct hermes_tx_descriptor desc; + __le16 frame_ctl; + __le16 duration_id; + u8 addr1[ETH_ALEN]; +} __packed; + +/* Rx frame header except compatibility 802.3 header */ +struct hermes_rx_descriptor { + /* Control */ + __le16 status; + __le32 time; + u8 silence; + u8 signal; + u8 rate; + u8 rxflow; + __le32 reserved; + + /* 802.11 header */ + __le16 frame_ctl; + __le16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + __le16 seq_ctl; + u8 addr4[ETH_ALEN]; + + /* Data length */ + __le16 data_len; +} __packed; + +struct orinoco_rx_data { + struct hermes_rx_descriptor *desc; + struct sk_buff *skb; + struct list_head list; +}; + +struct orinoco_scan_data { + void *buf; + size_t len; + int type; + struct list_head list; +}; + +/********************************************************************/ +/* Function prototypes */ +/********************************************************************/ + +static int __orinoco_set_multicast_list(struct net_device *dev); +static int __orinoco_up(struct orinoco_private *priv); +static int __orinoco_down(struct orinoco_private *priv); +static int __orinoco_commit(struct orinoco_private *priv); + +/********************************************************************/ +/* Internal helper functions */ +/********************************************************************/ + +void set_port_type(struct orinoco_private *priv) +{ + switch (priv->iw_mode) { + case NL80211_IFTYPE_STATION: + priv->port_type = 1; + priv->createibss = 0; + break; + case NL80211_IFTYPE_ADHOC: + if (priv->prefer_port3) { + priv->port_type = 3; + priv->createibss = 0; + } else { + priv->port_type = priv->ibss_port; + priv->createibss = 1; + } + break; + case NL80211_IFTYPE_MONITOR: + priv->port_type = 3; + priv->createibss = 0; + break; + default: + printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n", + priv->ndev->name); + } +} + +/********************************************************************/ +/* Device methods */ +/********************************************************************/ + +int orinoco_open(struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + unsigned long flags; + int err; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = __orinoco_up(priv); + + if (!err) + priv->open = 1; + + orinoco_unlock(priv, &flags); + + return err; +} +EXPORT_SYMBOL(orinoco_open); + +int orinoco_stop(struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + int err = 0; + + /* We mustn't use orinoco_lock() here, because we need to be + able to close the interface even if hw_unavailable is set + (e.g. as we're released after a PC Card removal) */ + orinoco_lock_irq(priv); + + priv->open = 0; + + err = __orinoco_down(priv); + + orinoco_unlock_irq(priv); + + return err; +} +EXPORT_SYMBOL(orinoco_stop); + +struct net_device_stats *orinoco_get_stats(struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + + return &priv->stats; +} +EXPORT_SYMBOL(orinoco_get_stats); + +void orinoco_set_multicast_list(struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) { + printk(KERN_DEBUG "%s: orinoco_set_multicast_list() " + "called when hw_unavailable\n", dev->name); + return; + } + + __orinoco_set_multicast_list(dev); + orinoco_unlock(priv, &flags); +} +EXPORT_SYMBOL(orinoco_set_multicast_list); + +int orinoco_change_mtu(struct net_device *dev, int new_mtu) +{ + struct orinoco_private *priv = ndev_priv(dev); + + if ((new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU)) + return -EINVAL; + + /* MTU + encapsulation + header length */ + if ((new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) > + (priv->nicbuf_size - ETH_HLEN)) + return -EINVAL; + + dev->mtu = new_mtu; + + return 0; +} +EXPORT_SYMBOL(orinoco_change_mtu); + +/********************************************************************/ +/* Tx path */ +/********************************************************************/ + +/* Add encapsulation and MIC to the existing SKB. + * The main xmit routine will then send the whole lot to the card. + * Need 8 bytes headroom + * Need 8 bytes tailroom + * + * With encapsulated ethernet II frame + * -------- + * 803.3 header (14 bytes) + * dst[6] + * -------- src[6] + * 803.3 header (14 bytes) len[2] + * dst[6] 803.2 header (8 bytes) + * src[6] encaps[6] + * len[2] <- leave alone -> len[2] + * -------- -------- <-- 0 + * Payload Payload + * ... ... + * + * -------- -------- + * MIC (8 bytes) + * -------- + * + * returns 0 on success, -ENOMEM on error. + */ +int orinoco_process_xmit_skb(struct sk_buff *skb, + struct net_device *dev, + struct orinoco_private *priv, + int *tx_control, + u8 *mic_buf) +{ + struct orinoco_tkip_key *key; + struct ethhdr *eh; + int do_mic; + + key = (struct orinoco_tkip_key *) priv->keys[priv->tx_key].key; + + do_mic = ((priv->encode_alg == ORINOCO_ALG_TKIP) && + (key != NULL)); + + if (do_mic) + *tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) | + HERMES_TXCTRL_MIC; + + eh = (struct ethhdr *)skb->data; + + /* Encapsulate Ethernet-II frames */ + if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */ + struct header_struct { + struct ethhdr eth; /* 802.3 header */ + u8 encap[6]; /* 802.2 header */ + } __packed hdr; + int len = skb->len + sizeof(encaps_hdr) - (2 * ETH_ALEN); + + if (skb_headroom(skb) < ENCAPS_OVERHEAD) { + if (net_ratelimit()) + printk(KERN_ERR + "%s: Not enough headroom for 802.2 headers %d\n", + dev->name, skb_headroom(skb)); + return -ENOMEM; + } + + /* Fill in new header */ + memcpy(&hdr.eth, eh, 2 * ETH_ALEN); + hdr.eth.h_proto = htons(len); + memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr)); + + /* Make room for the new header, and copy it in */ + eh = (struct ethhdr *) skb_push(skb, ENCAPS_OVERHEAD); + memcpy(eh, &hdr, sizeof(hdr)); + } + + /* Calculate Michael MIC */ + if (do_mic) { + size_t len = skb->len - ETH_HLEN; + u8 *mic = &mic_buf[0]; + + /* Have to write to an even address, so copy the spare + * byte across */ + if (skb->len % 2) { + *mic = skb->data[skb->len - 1]; + mic++; + } + + orinoco_mic(priv->tx_tfm_mic, key->tx_mic, + eh->h_dest, eh->h_source, 0 /* priority */, + skb->data + ETH_HLEN, + len, mic); + } + + return 0; +} +EXPORT_SYMBOL(orinoco_process_xmit_skb); + +static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + struct hermes *hw = &priv->hw; + int err = 0; + u16 txfid = priv->txfid; + int tx_control; + unsigned long flags; + u8 mic_buf[MICHAEL_MIC_LEN + 1]; + + if (!netif_running(dev)) { + printk(KERN_ERR "%s: Tx on stopped device!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (netif_queue_stopped(dev)) { + printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (orinoco_lock(priv, &flags) != 0) { + printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (!netif_carrier_ok(dev) || + (priv->iw_mode == NL80211_IFTYPE_MONITOR)) { + /* Oops, the firmware hasn't established a connection, + silently drop the packet (this seems to be the + safest approach). */ + goto drop; + } + + /* Check packet length */ + if (skb->len < ETH_HLEN) + goto drop; + + tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX; + + err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control, + &mic_buf[0]); + if (err) + goto drop; + + if (priv->has_alt_txcntl) { + /* WPA enabled firmwares have tx_cntl at the end of + * the 802.11 header. So write zeroed descriptor and + * 802.11 header at the same time + */ + char desc[HERMES_802_3_OFFSET]; + __le16 *txcntl = (__le16 *) &desc[HERMES_TXCNTL2_OFFSET]; + + memset(&desc, 0, sizeof(desc)); + + *txcntl = cpu_to_le16(tx_control); + err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), + txfid, 0); + if (err) { + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d writing Tx " + "descriptor to BAP\n", dev->name, err); + goto busy; + } + } else { + struct hermes_tx_descriptor desc; + + memset(&desc, 0, sizeof(desc)); + + desc.tx_control = cpu_to_le16(tx_control); + err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), + txfid, 0); + if (err) { + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d writing Tx " + "descriptor to BAP\n", dev->name, err); + goto busy; + } + + /* Clear the 802.11 header and data length fields - some + * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused + * if this isn't done. */ + hermes_clear_words(hw, HERMES_DATA0, + HERMES_802_3_OFFSET - HERMES_802_11_OFFSET); + } + + err = hw->ops->bap_pwrite(hw, USER_BAP, skb->data, skb->len, + txfid, HERMES_802_3_OFFSET); + if (err) { + printk(KERN_ERR "%s: Error %d writing packet to BAP\n", + dev->name, err); + goto busy; + } + + if (tx_control & HERMES_TXCTRL_MIC) { + size_t offset = HERMES_802_3_OFFSET + skb->len; + size_t len = MICHAEL_MIC_LEN; + + if (offset % 2) { + offset--; + len++; + } + err = hw->ops->bap_pwrite(hw, USER_BAP, &mic_buf[0], len, + txfid, offset); + if (err) { + printk(KERN_ERR "%s: Error %d writing MIC to BAP\n", + dev->name, err); + goto busy; + } + } + + /* Finally, we actually initiate the send */ + netif_stop_queue(dev); + + err = hw->ops->cmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL, + txfid, NULL); + if (err) { + netif_start_queue(dev); + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d transmitting packet\n", + dev->name, err); + goto busy; + } + + stats->tx_bytes += HERMES_802_3_OFFSET + skb->len; + goto ok; + + drop: + stats->tx_errors++; + stats->tx_dropped++; + + ok: + orinoco_unlock(priv, &flags); + dev_kfree_skb(skb); + return NETDEV_TX_OK; + + busy: + if (err == -EIO) + schedule_work(&priv->reset_work); + orinoco_unlock(priv, &flags); + return NETDEV_TX_BUSY; +} + +static void __orinoco_ev_alloc(struct net_device *dev, struct hermes *hw) +{ + struct orinoco_private *priv = ndev_priv(dev); + u16 fid = hermes_read_regn(hw, ALLOCFID); + + if (fid != priv->txfid) { + if (fid != DUMMY_FID) + printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n", + dev->name, fid); + return; + } + + hermes_write_regn(hw, ALLOCFID, DUMMY_FID); +} + +static void __orinoco_ev_tx(struct net_device *dev, struct hermes *hw) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + + stats->tx_packets++; + + netif_wake_queue(dev); + + hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); +} + +static void __orinoco_ev_txexc(struct net_device *dev, struct hermes *hw) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + u16 fid = hermes_read_regn(hw, TXCOMPLFID); + u16 status; + struct hermes_txexc_data hdr; + int err = 0; + + if (fid == DUMMY_FID) + return; /* Nothing's really happened */ + + /* Read part of the frame header - we need status and addr1 */ + err = hw->ops->bap_pread(hw, IRQ_BAP, &hdr, + sizeof(struct hermes_txexc_data), + fid, 0); + + hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); + stats->tx_errors++; + + if (err) { + printk(KERN_WARNING "%s: Unable to read descriptor on Tx error " + "(FID=%04X error %d)\n", + dev->name, fid, err); + return; + } + + DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name, + err, fid); + + /* We produce a TXDROP event only for retry or lifetime + * exceeded, because that's the only status that really mean + * that this particular node went away. + * Other errors means that *we* screwed up. - Jean II */ + status = le16_to_cpu(hdr.desc.status); + if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) { + union iwreq_data wrqu; + + /* Copy 802.11 dest address. + * We use the 802.11 header because the frame may + * not be 802.3 or may be mangled... + * In Ad-Hoc mode, it will be the node address. + * In managed mode, it will be most likely the AP addr + * User space will figure out how to convert it to + * whatever it needs (IP address or else). + * - Jean II */ + memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN); + wrqu.addr.sa_family = ARPHRD_ETHER; + + /* Send event to user space */ + wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL); + } + + netif_wake_queue(dev); +} + +void orinoco_tx_timeout(struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + struct hermes *hw = &priv->hw; + + printk(KERN_WARNING "%s: Tx timeout! " + "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n", + dev->name, hermes_read_regn(hw, ALLOCFID), + hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT)); + + stats->tx_errors++; + + schedule_work(&priv->reset_work); +} +EXPORT_SYMBOL(orinoco_tx_timeout); + +/********************************************************************/ +/* Rx path (data frames) */ +/********************************************************************/ + +/* Does the frame have a SNAP header indicating it should be + * de-encapsulated to Ethernet-II? */ +static inline int is_ethersnap(void *_hdr) +{ + u8 *hdr = _hdr; + + /* We de-encapsulate all packets which, a) have SNAP headers + * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header + * and where b) the OUI of the SNAP header is 00:00:00 or + * 00:00:f8 - we need both because different APs appear to use + * different OUIs for some reason */ + return (memcmp(hdr, &encaps_hdr, 5) == 0) + && ((hdr[5] == 0x00) || (hdr[5] == 0xf8)); +} + +static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac, + int level, int noise) +{ + struct iw_quality wstats; + wstats.level = level - 0x95; + wstats.noise = noise - 0x95; + wstats.qual = (level > noise) ? (level - noise) : 0; + wstats.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; + /* Update spy records */ + wireless_spy_update(dev, mac, &wstats); +} + +static void orinoco_stat_gather(struct net_device *dev, + struct sk_buff *skb, + struct hermes_rx_descriptor *desc) +{ + struct orinoco_private *priv = ndev_priv(dev); + + /* Using spy support with lots of Rx packets, like in an + * infrastructure (AP), will really slow down everything, because + * the MAC address must be compared to each entry of the spy list. + * If the user really asks for it (set some address in the + * spy list), we do it, but he will pay the price. + * Note that to get here, you need both WIRELESS_SPY + * compiled in AND some addresses in the list !!! + */ + /* Note : gcc will optimise the whole section away if + * WIRELESS_SPY is not defined... - Jean II */ + if (SPY_NUMBER(priv)) { + orinoco_spy_gather(dev, skb_mac_header(skb) + ETH_ALEN, + desc->signal, desc->silence); + } +} + +/* + * orinoco_rx_monitor - handle received monitor frames. + * + * Arguments: + * dev network device + * rxfid received FID + * desc rx descriptor of the frame + * + * Call context: interrupt + */ +static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid, + struct hermes_rx_descriptor *desc) +{ + u32 hdrlen = 30; /* return full header by default */ + u32 datalen = 0; + u16 fc; + int err; + int len; + struct sk_buff *skb; + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + struct hermes *hw = &priv->hw; + + len = le16_to_cpu(desc->data_len); + + /* Determine the size of the header and the data */ + fc = le16_to_cpu(desc->frame_ctl); + switch (fc & IEEE80211_FCTL_FTYPE) { + case IEEE80211_FTYPE_DATA: + if ((fc & IEEE80211_FCTL_TODS) + && (fc & IEEE80211_FCTL_FROMDS)) + hdrlen = 30; + else + hdrlen = 24; + datalen = len; + break; + case IEEE80211_FTYPE_MGMT: + hdrlen = 24; + datalen = len; + break; + case IEEE80211_FTYPE_CTL: + switch (fc & IEEE80211_FCTL_STYPE) { + case IEEE80211_STYPE_PSPOLL: + case IEEE80211_STYPE_RTS: + case IEEE80211_STYPE_CFEND: + case IEEE80211_STYPE_CFENDACK: + hdrlen = 16; + break; + case IEEE80211_STYPE_CTS: + case IEEE80211_STYPE_ACK: + hdrlen = 10; + break; + } + break; + default: + /* Unknown frame type */ + break; + } + + /* sanity check the length */ + if (datalen > IEEE80211_MAX_DATA_LEN + 12) { + printk(KERN_DEBUG "%s: oversized monitor frame, " + "data length = %d\n", dev->name, datalen); + stats->rx_length_errors++; + goto update_stats; + } + + skb = dev_alloc_skb(hdrlen + datalen); + if (!skb) { + printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n", + dev->name); + goto update_stats; + } + + /* Copy the 802.11 header to the skb */ + memcpy(skb_put(skb, hdrlen), &(desc->frame_ctl), hdrlen); + skb_reset_mac_header(skb); + + /* If any, copy the data from the card to the skb */ + if (datalen > 0) { + err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, datalen), + ALIGN(datalen, 2), rxfid, + HERMES_802_2_OFFSET); + if (err) { + printk(KERN_ERR "%s: error %d reading monitor frame\n", + dev->name, err); + goto drop; + } + } + + skb->dev = dev; + skb->ip_summed = CHECKSUM_NONE; + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = cpu_to_be16(ETH_P_802_2); + + stats->rx_packets++; + stats->rx_bytes += skb->len; + + netif_rx(skb); + return; + + drop: + dev_kfree_skb_irq(skb); + update_stats: + stats->rx_errors++; + stats->rx_dropped++; +} + +void __orinoco_ev_rx(struct net_device *dev, struct hermes *hw) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + struct iw_statistics *wstats = &priv->wstats; + struct sk_buff *skb = NULL; + u16 rxfid, status; + int length; + struct hermes_rx_descriptor *desc; + struct orinoco_rx_data *rx_data; + int err; + + desc = kmalloc(sizeof(*desc), GFP_ATOMIC); + if (!desc) + goto update_stats; + + rxfid = hermes_read_regn(hw, RXFID); + + err = hw->ops->bap_pread(hw, IRQ_BAP, desc, sizeof(*desc), + rxfid, 0); + if (err) { + printk(KERN_ERR "%s: error %d reading Rx descriptor. " + "Frame dropped.\n", dev->name, err); + goto update_stats; + } + + status = le16_to_cpu(desc->status); + + if (status & HERMES_RXSTAT_BADCRC) { + DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", + dev->name); + stats->rx_crc_errors++; + goto update_stats; + } + + /* Handle frames in monitor mode */ + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { + orinoco_rx_monitor(dev, rxfid, desc); + goto out; + } + + if (status & HERMES_RXSTAT_UNDECRYPTABLE) { + DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n", + dev->name); + wstats->discard.code++; + goto update_stats; + } + + length = le16_to_cpu(desc->data_len); + + /* Sanity checks */ + if (length < 3) { /* No for even an 802.2 LLC header */ + /* At least on Symbol firmware with PCF we get quite a + lot of these legitimately - Poll frames with no + data. */ + goto out; + } + if (length > IEEE80211_MAX_DATA_LEN) { + printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", + dev->name, length); + stats->rx_length_errors++; + goto update_stats; + } + + /* Payload size does not include Michael MIC. Increase payload + * size to read it together with the data. */ + if (status & HERMES_RXSTAT_MIC) + length += MICHAEL_MIC_LEN; + + /* We need space for the packet data itself, plus an ethernet + header, plus 2 bytes so we can align the IP header on a + 32bit boundary, plus 1 byte so we can read in odd length + packets from the card, which has an IO granularity of 16 + bits */ + skb = dev_alloc_skb(length + ETH_HLEN + 2 + 1); + if (!skb) { + printk(KERN_WARNING "%s: Can't allocate skb for Rx\n", + dev->name); + goto update_stats; + } + + /* We'll prepend the header, so reserve space for it. The worst + case is no decapsulation, when 802.3 header is prepended and + nothing is removed. 2 is for aligning the IP header. */ + skb_reserve(skb, ETH_HLEN + 2); + + err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, length), + ALIGN(length, 2), rxfid, + HERMES_802_2_OFFSET); + if (err) { + printk(KERN_ERR "%s: error %d reading frame. " + "Frame dropped.\n", dev->name, err); + goto drop; + } + + /* Add desc and skb to rx queue */ + rx_data = kzalloc(sizeof(*rx_data), GFP_ATOMIC); + if (!rx_data) + goto drop; + + rx_data->desc = desc; + rx_data->skb = skb; + list_add_tail(&rx_data->list, &priv->rx_list); + tasklet_schedule(&priv->rx_tasklet); + + return; + +drop: + dev_kfree_skb_irq(skb); +update_stats: + stats->rx_errors++; + stats->rx_dropped++; +out: + kfree(desc); +} +EXPORT_SYMBOL(__orinoco_ev_rx); + +static void orinoco_rx(struct net_device *dev, + struct hermes_rx_descriptor *desc, + struct sk_buff *skb) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + u16 status, fc; + int length; + struct ethhdr *hdr; + + status = le16_to_cpu(desc->status); + length = le16_to_cpu(desc->data_len); + fc = le16_to_cpu(desc->frame_ctl); + + /* Calculate and check MIC */ + if (status & HERMES_RXSTAT_MIC) { + struct orinoco_tkip_key *key; + int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >> + HERMES_MIC_KEY_ID_SHIFT); + u8 mic[MICHAEL_MIC_LEN]; + u8 *rxmic; + u8 *src = (fc & IEEE80211_FCTL_FROMDS) ? + desc->addr3 : desc->addr2; + + /* Extract Michael MIC from payload */ + rxmic = skb->data + skb->len - MICHAEL_MIC_LEN; + + skb_trim(skb, skb->len - MICHAEL_MIC_LEN); + length -= MICHAEL_MIC_LEN; + + key = (struct orinoco_tkip_key *) priv->keys[key_id].key; + + if (!key) { + printk(KERN_WARNING "%s: Received encrypted frame from " + "%pM using key %i, but key is not installed\n", + dev->name, src, key_id); + goto drop; + } + + orinoco_mic(priv->rx_tfm_mic, key->rx_mic, desc->addr1, src, + 0, /* priority or QoS? */ + skb->data, skb->len, &mic[0]); + + if (memcmp(mic, rxmic, + MICHAEL_MIC_LEN)) { + union iwreq_data wrqu; + struct iw_michaelmicfailure wxmic; + + printk(KERN_WARNING "%s: " + "Invalid Michael MIC in data frame from %pM, " + "using key %i\n", + dev->name, src, key_id); + + /* TODO: update stats */ + + /* Notify userspace */ + memset(&wxmic, 0, sizeof(wxmic)); + wxmic.flags = key_id & IW_MICFAILURE_KEY_ID; + wxmic.flags |= (desc->addr1[0] & 1) ? + IW_MICFAILURE_GROUP : IW_MICFAILURE_PAIRWISE; + wxmic.src_addr.sa_family = ARPHRD_ETHER; + memcpy(wxmic.src_addr.sa_data, src, ETH_ALEN); + + (void) orinoco_hw_get_tkip_iv(priv, key_id, + &wxmic.tsc[0]); + + memset(&wrqu, 0, sizeof(wrqu)); + wrqu.data.length = sizeof(wxmic); + wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu, + (char *) &wxmic); + + goto drop; + } + } + + /* Handle decapsulation + * In most cases, the firmware tell us about SNAP frames. + * For some reason, the SNAP frames sent by LinkSys APs + * are not properly recognised by most firmwares. + * So, check ourselves */ + if (length >= ENCAPS_OVERHEAD && + (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) || + ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) || + is_ethersnap(skb->data))) { + /* These indicate a SNAP within 802.2 LLC within + 802.11 frame which we'll need to de-encapsulate to + the original EthernetII frame. */ + hdr = (struct ethhdr *)skb_push(skb, + ETH_HLEN - ENCAPS_OVERHEAD); + } else { + /* 802.3 frame - prepend 802.3 header as is */ + hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN); + hdr->h_proto = htons(length); + } + memcpy(hdr->h_dest, desc->addr1, ETH_ALEN); + if (fc & IEEE80211_FCTL_FROMDS) + memcpy(hdr->h_source, desc->addr3, ETH_ALEN); + else + memcpy(hdr->h_source, desc->addr2, ETH_ALEN); + + skb->protocol = eth_type_trans(skb, dev); + skb->ip_summed = CHECKSUM_NONE; + if (fc & IEEE80211_FCTL_TODS) + skb->pkt_type = PACKET_OTHERHOST; + + /* Process the wireless stats if needed */ + orinoco_stat_gather(dev, skb, desc); + + /* Pass the packet to the networking stack */ + netif_rx(skb); + stats->rx_packets++; + stats->rx_bytes += length; + + return; + + drop: + dev_kfree_skb(skb); + stats->rx_errors++; + stats->rx_dropped++; +} + +static void orinoco_rx_isr_tasklet(unsigned long data) +{ + struct orinoco_private *priv = (struct orinoco_private *) data; + struct net_device *dev = priv->ndev; + struct orinoco_rx_data *rx_data, *temp; + struct hermes_rx_descriptor *desc; + struct sk_buff *skb; + unsigned long flags; + + /* orinoco_rx requires the driver lock, and we also need to + * protect priv->rx_list, so just hold the lock over the + * lot. + * + * If orinoco_lock fails, we've unplugged the card. In this + * case just abort. */ + if (orinoco_lock(priv, &flags) != 0) + return; + + /* extract desc and skb from queue */ + list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) { + desc = rx_data->desc; + skb = rx_data->skb; + list_del(&rx_data->list); + kfree(rx_data); + + orinoco_rx(dev, desc, skb); + + kfree(desc); + } + + orinoco_unlock(priv, &flags); +} + +/********************************************************************/ +/* Rx path (info frames) */ +/********************************************************************/ + +static void print_linkstatus(struct net_device *dev, u16 status) +{ + char *s; + + if (suppress_linkstatus) + return; + + switch (status) { + case HERMES_LINKSTATUS_NOT_CONNECTED: + s = "Not Connected"; + break; + case HERMES_LINKSTATUS_CONNECTED: + s = "Connected"; + break; + case HERMES_LINKSTATUS_DISCONNECTED: + s = "Disconnected"; + break; + case HERMES_LINKSTATUS_AP_CHANGE: + s = "AP Changed"; + break; + case HERMES_LINKSTATUS_AP_OUT_OF_RANGE: + s = "AP Out of Range"; + break; + case HERMES_LINKSTATUS_AP_IN_RANGE: + s = "AP In Range"; + break; + case HERMES_LINKSTATUS_ASSOC_FAILED: + s = "Association Failed"; + break; + default: + s = "UNKNOWN"; + } + + printk(KERN_DEBUG "%s: New link status: %s (%04x)\n", + dev->name, s, status); +} + +/* Search scan results for requested BSSID, join it if found */ +static void orinoco_join_ap(struct work_struct *work) +{ + struct orinoco_private *priv = + container_of(work, struct orinoco_private, join_work); + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + int err; + unsigned long flags; + struct join_req { + u8 bssid[ETH_ALEN]; + __le16 channel; + } __packed req; + const int atom_len = offsetof(struct prism2_scan_apinfo, atim); + struct prism2_scan_apinfo *atom = NULL; + int offset = 4; + int found = 0; + u8 *buf; + u16 len; + + /* Allocate buffer for scan results */ + buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL); + if (!buf) + return; + + if (orinoco_lock(priv, &flags) != 0) + goto fail_lock; + + /* Sanity checks in case user changed something in the meantime */ + if (!priv->bssid_fixed) + goto out; + + if (strlen(priv->desired_essid) == 0) + goto out; + + /* Read scan results from the firmware */ + err = hw->ops->read_ltv(hw, USER_BAP, + HERMES_RID_SCANRESULTSTABLE, + MAX_SCAN_LEN, &len, buf); + if (err) { + printk(KERN_ERR "%s: Cannot read scan results\n", + dev->name); + goto out; + } + + len = HERMES_RECLEN_TO_BYTES(len); + + /* Go through the scan results looking for the channel of the AP + * we were requested to join */ + for (; offset + atom_len <= len; offset += atom_len) { + atom = (struct prism2_scan_apinfo *) (buf + offset); + if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) { + found = 1; + break; + } + } + + if (!found) { + DEBUG(1, "%s: Requested AP not found in scan results\n", + dev->name); + goto out; + } + + memcpy(req.bssid, priv->desired_bssid, ETH_ALEN); + req.channel = atom->channel; /* both are little-endian */ + err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST, + &req); + if (err) + printk(KERN_ERR "%s: Error issuing join request\n", dev->name); + + out: + orinoco_unlock(priv, &flags); + + fail_lock: + kfree(buf); +} + +/* Send new BSSID to userspace */ +static void orinoco_send_bssid_wevent(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + union iwreq_data wrqu; + int err; + + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, + ETH_ALEN, NULL, wrqu.ap_addr.sa_data); + if (err != 0) + return; + + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + + /* Send event to user space */ + wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); +} + +static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + union iwreq_data wrqu; + int err; + u8 buf[88]; + u8 *ie; + + if (!priv->has_wpa) + return; + + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO, + sizeof(buf), NULL, &buf); + if (err != 0) + return; + + ie = orinoco_get_wpa_ie(buf, sizeof(buf)); + if (ie) { + int rem = sizeof(buf) - (ie - &buf[0]); + wrqu.data.length = ie[1] + 2; + if (wrqu.data.length > rem) + wrqu.data.length = rem; + + if (wrqu.data.length) + /* Send event to user space */ + wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, ie); + } +} + +static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + union iwreq_data wrqu; + int err; + u8 buf[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */ + u8 *ie; + + if (!priv->has_wpa) + return; + + err = hw->ops->read_ltv(hw, USER_BAP, + HERMES_RID_CURRENT_ASSOC_RESP_INFO, + sizeof(buf), NULL, &buf); + if (err != 0) + return; + + ie = orinoco_get_wpa_ie(buf, sizeof(buf)); + if (ie) { + int rem = sizeof(buf) - (ie - &buf[0]); + wrqu.data.length = ie[1] + 2; + if (wrqu.data.length > rem) + wrqu.data.length = rem; + + if (wrqu.data.length) + /* Send event to user space */ + wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, ie); + } +} + +static void orinoco_send_wevents(struct work_struct *work) +{ + struct orinoco_private *priv = + container_of(work, struct orinoco_private, wevent_work); + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return; + + orinoco_send_assocreqie_wevent(priv); + orinoco_send_assocrespie_wevent(priv); + orinoco_send_bssid_wevent(priv); + + orinoco_unlock(priv, &flags); +} + +static void qbuf_scan(struct orinoco_private *priv, void *buf, + int len, int type) +{ + struct orinoco_scan_data *sd; + unsigned long flags; + + sd = kmalloc(sizeof(*sd), GFP_ATOMIC); + if (!sd) + return; + + sd->buf = buf; + sd->len = len; + sd->type = type; + + spin_lock_irqsave(&priv->scan_lock, flags); + list_add_tail(&sd->list, &priv->scan_list); + spin_unlock_irqrestore(&priv->scan_lock, flags); + + schedule_work(&priv->process_scan); +} + +static void qabort_scan(struct orinoco_private *priv) +{ + struct orinoco_scan_data *sd; + unsigned long flags; + + sd = kmalloc(sizeof(*sd), GFP_ATOMIC); + if (!sd) + return; + + sd->len = -1; /* Abort */ + + spin_lock_irqsave(&priv->scan_lock, flags); + list_add_tail(&sd->list, &priv->scan_list); + spin_unlock_irqrestore(&priv->scan_lock, flags); + + schedule_work(&priv->process_scan); +} + +static void orinoco_process_scan_results(struct work_struct *work) +{ + struct orinoco_private *priv = + container_of(work, struct orinoco_private, process_scan); + struct orinoco_scan_data *sd, *temp; + unsigned long flags; + void *buf; + int len; + int type; + + spin_lock_irqsave(&priv->scan_lock, flags); + list_for_each_entry_safe(sd, temp, &priv->scan_list, list) { + + buf = sd->buf; + len = sd->len; + type = sd->type; + + list_del(&sd->list); + spin_unlock_irqrestore(&priv->scan_lock, flags); + kfree(sd); + + if (len > 0) { + if (type == HERMES_INQ_CHANNELINFO) + orinoco_add_extscan_result(priv, buf, len); + else + orinoco_add_hostscan_results(priv, buf, len); + + kfree(buf); + } else { + /* Either abort or complete the scan */ + orinoco_scan_done(priv, (len < 0)); + } + + spin_lock_irqsave(&priv->scan_lock, flags); + } + spin_unlock_irqrestore(&priv->scan_lock, flags); +} + +void __orinoco_ev_info(struct net_device *dev, struct hermes *hw) +{ + struct orinoco_private *priv = ndev_priv(dev); + u16 infofid; + struct { + __le16 len; + __le16 type; + } __packed info; + int len, type; + int err; + + /* This is an answer to an INQUIRE command that we did earlier, + * or an information "event" generated by the card + * The controller return to us a pseudo frame containing + * the information in question - Jean II */ + infofid = hermes_read_regn(hw, INFOFID); + + /* Read the info frame header - don't try too hard */ + err = hw->ops->bap_pread(hw, IRQ_BAP, &info, sizeof(info), + infofid, 0); + if (err) { + printk(KERN_ERR "%s: error %d reading info frame. " + "Frame dropped.\n", dev->name, err); + return; + } + + len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len)); + type = le16_to_cpu(info.type); + + switch (type) { + case HERMES_INQ_TALLIES: { + struct hermes_tallies_frame tallies; + struct iw_statistics *wstats = &priv->wstats; + + if (len > sizeof(tallies)) { + printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n", + dev->name, len); + len = sizeof(tallies); + } + + err = hw->ops->bap_pread(hw, IRQ_BAP, &tallies, len, + infofid, sizeof(info)); + if (err) + break; + + /* Increment our various counters */ + /* wstats->discard.nwid - no wrong BSSID stuff */ + wstats->discard.code += + le16_to_cpu(tallies.RxWEPUndecryptable); + if (len == sizeof(tallies)) + wstats->discard.code += + le16_to_cpu(tallies.RxDiscards_WEPICVError) + + le16_to_cpu(tallies.RxDiscards_WEPExcluded); + wstats->discard.misc += + le16_to_cpu(tallies.TxDiscardsWrongSA); + wstats->discard.fragment += + le16_to_cpu(tallies.RxMsgInBadMsgFragments); + wstats->discard.retries += + le16_to_cpu(tallies.TxRetryLimitExceeded); + /* wstats->miss.beacon - no match */ + } + break; + case HERMES_INQ_LINKSTATUS: { + struct hermes_linkstatus linkstatus; + u16 newstatus; + int connected; + + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) + break; + + if (len != sizeof(linkstatus)) { + printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n", + dev->name, len); + break; + } + + err = hw->ops->bap_pread(hw, IRQ_BAP, &linkstatus, len, + infofid, sizeof(info)); + if (err) + break; + newstatus = le16_to_cpu(linkstatus.linkstatus); + + /* Symbol firmware uses "out of range" to signal that + * the hostscan frame can be requested. */ + if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE && + priv->firmware_type == FIRMWARE_TYPE_SYMBOL && + priv->has_hostscan && priv->scan_request) { + hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL); + break; + } + + connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) + || (newstatus == HERMES_LINKSTATUS_AP_CHANGE) + || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE); + + if (connected) + netif_carrier_on(dev); + else if (!ignore_disconnect) + netif_carrier_off(dev); + + if (newstatus != priv->last_linkstatus) { + priv->last_linkstatus = newstatus; + print_linkstatus(dev, newstatus); + /* The info frame contains only one word which is the + * status (see hermes.h). The status is pretty boring + * in itself, that's why we export the new BSSID... + * Jean II */ + schedule_work(&priv->wevent_work); + } + } + break; + case HERMES_INQ_SCAN: + if (!priv->scan_request && priv->bssid_fixed && + priv->firmware_type == FIRMWARE_TYPE_INTERSIL) { + schedule_work(&priv->join_work); + break; + } + /* fall through */ + case HERMES_INQ_HOSTSCAN: + case HERMES_INQ_HOSTSCAN_SYMBOL: { + /* Result of a scanning. Contains information about + * cells in the vicinity - Jean II */ + unsigned char *buf; + + /* Sanity check */ + if (len > 4096) { + printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n", + dev->name, len); + qabort_scan(priv); + break; + } + + /* Allocate buffer for results */ + buf = kmalloc(len, GFP_ATOMIC); + if (buf == NULL) { + /* No memory, so can't printk()... */ + qabort_scan(priv); + break; + } + + /* Read scan data */ + err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) buf, len, + infofid, sizeof(info)); + if (err) { + kfree(buf); + qabort_scan(priv); + break; + } + +#ifdef ORINOCO_DEBUG + { + int i; + printk(KERN_DEBUG "Scan result [%02X", buf[0]); + for (i = 1; i < (len * 2); i++) + printk(":%02X", buf[i]); + printk("]\n"); + } +#endif /* ORINOCO_DEBUG */ + + qbuf_scan(priv, buf, len, type); + } + break; + case HERMES_INQ_CHANNELINFO: + { + struct agere_ext_scan_info *bss; + + if (!priv->scan_request) { + printk(KERN_DEBUG "%s: Got chaninfo without scan, " + "len=%d\n", dev->name, len); + break; + } + + /* An empty result indicates that the scan is complete */ + if (len == 0) { + qbuf_scan(priv, NULL, len, type); + break; + } + + /* Sanity check */ + else if (len < (offsetof(struct agere_ext_scan_info, + data) + 2)) { + /* Drop this result now so we don't have to + * keep checking later */ + printk(KERN_WARNING + "%s: Ext scan results too short (%d bytes)\n", + dev->name, len); + break; + } + + bss = kmalloc(len, GFP_ATOMIC); + if (bss == NULL) + break; + + /* Read scan data */ + err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) bss, len, + infofid, sizeof(info)); + if (err) + kfree(bss); + else + qbuf_scan(priv, bss, len, type); + + break; + } + case HERMES_INQ_SEC_STAT_AGERE: + /* Security status (Agere specific) */ + /* Ignore this frame for now */ + if (priv->firmware_type == FIRMWARE_TYPE_AGERE) + break; + /* fall through */ + default: + printk(KERN_DEBUG "%s: Unknown information frame received: " + "type 0x%04x, length %d\n", dev->name, type, len); + /* We don't actually do anything about it */ + break; + } +} +EXPORT_SYMBOL(__orinoco_ev_info); + +static void __orinoco_ev_infdrop(struct net_device *dev, struct hermes *hw) +{ + if (net_ratelimit()) + printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name); +} + +/********************************************************************/ +/* Internal hardware control routines */ +/********************************************************************/ + +static int __orinoco_up(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + int err; + + netif_carrier_off(dev); /* just to make sure */ + + err = __orinoco_commit(priv); + if (err) { + printk(KERN_ERR "%s: Error %d configuring card\n", + dev->name, err); + return err; + } + + /* Fire things up again */ + hermes_set_irqmask(hw, ORINOCO_INTEN); + err = hermes_enable_port(hw, 0); + if (err) { + printk(KERN_ERR "%s: Error %d enabling MAC port\n", + dev->name, err); + return err; + } + + netif_start_queue(dev); + + return 0; +} + +static int __orinoco_down(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + int err; + + netif_stop_queue(dev); + + if (!priv->hw_unavailable) { + if (!priv->broken_disableport) { + err = hermes_disable_port(hw, 0); + if (err) { + /* Some firmwares (e.g. Intersil 1.3.x) seem + * to have problems disabling the port, oh + * well, too bad. */ + printk(KERN_WARNING "%s: Error %d disabling MAC port\n", + dev->name, err); + priv->broken_disableport = 1; + } + } + hermes_set_irqmask(hw, 0); + hermes_write_regn(hw, EVACK, 0xffff); + } + + orinoco_scan_done(priv, true); + + /* firmware will have to reassociate */ + netif_carrier_off(dev); + priv->last_linkstatus = 0xffff; + + return 0; +} + +static int orinoco_reinit_firmware(struct orinoco_private *priv) +{ + struct hermes *hw = &priv->hw; + int err; + + err = hw->ops->init(hw); + if (priv->do_fw_download && !err) { + err = orinoco_download(priv); + if (err) + priv->do_fw_download = 0; + } + if (!err) + err = orinoco_hw_allocate_fid(priv); + + return err; +} + +static int +__orinoco_set_multicast_list(struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + int err = 0; + int promisc, mc_count; + + /* The Hermes doesn't seem to have an allmulti mode, so we go + * into promiscuous mode and let the upper levels deal. */ + if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) || + (netdev_mc_count(dev) > MAX_MULTICAST(priv))) { + promisc = 1; + mc_count = 0; + } else { + promisc = 0; + mc_count = netdev_mc_count(dev); + } + + err = __orinoco_hw_set_multicast_list(priv, dev, mc_count, promisc); + + return err; +} + +/* This must be called from user context, without locks held - use + * schedule_work() */ +void orinoco_reset(struct work_struct *work) +{ + struct orinoco_private *priv = + container_of(work, struct orinoco_private, reset_work); + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + int err; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + /* When the hardware becomes available again, whatever + * detects that is responsible for re-initializing + * it. So no need for anything further */ + return; + + netif_stop_queue(dev); + + /* Shut off interrupts. Depending on what state the hardware + * is in, this might not work, but we'll try anyway */ + hermes_set_irqmask(hw, 0); + hermes_write_regn(hw, EVACK, 0xffff); + + priv->hw_unavailable++; + priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */ + netif_carrier_off(dev); + + orinoco_unlock(priv, &flags); + + /* Scanning support: Notify scan cancellation */ + orinoco_scan_done(priv, true); + + if (priv->hard_reset) { + err = (*priv->hard_reset)(priv); + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d " + "performing hard reset\n", dev->name, err); + goto disable; + } + } + + err = orinoco_reinit_firmware(priv); + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", + dev->name, err); + goto disable; + } + + /* This has to be called from user context */ + orinoco_lock_irq(priv); + + priv->hw_unavailable--; + + /* priv->open or priv->hw_unavailable might have changed while + * we dropped the lock */ + if (priv->open && (!priv->hw_unavailable)) { + err = __orinoco_up(priv); + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n", + dev->name, err); + } else + dev->trans_start = jiffies; + } + + orinoco_unlock_irq(priv); + + return; + disable: + hermes_set_irqmask(hw, 0); + netif_device_detach(dev); + printk(KERN_ERR "%s: Device has been disabled!\n", dev->name); +} + +static int __orinoco_commit(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + int err = 0; + + /* If we've called commit, we are reconfiguring or bringing the + * interface up. Maintaining countermeasures across this would + * be confusing, so note that we've disabled them. The port will + * be enabled later in orinoco_commit or __orinoco_up. */ + priv->tkip_cm_active = 0; + + err = orinoco_hw_program_rids(priv); + + /* FIXME: what about netif_tx_lock */ + (void) __orinoco_set_multicast_list(dev); + + return err; +} + +/* Ensures configuration changes are applied. May result in a reset. + * The caller should hold priv->lock + */ +int orinoco_commit(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + int err; + + if (priv->broken_disableport) { + schedule_work(&priv->reset_work); + return 0; + } + + err = hermes_disable_port(hw, 0); + if (err) { + printk(KERN_WARNING "%s: Unable to disable port " + "while reconfiguring card\n", dev->name); + priv->broken_disableport = 1; + goto out; + } + + err = __orinoco_commit(priv); + if (err) { + printk(KERN_WARNING "%s: Unable to reconfigure card\n", + dev->name); + goto out; + } + + err = hermes_enable_port(hw, 0); + if (err) { + printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n", + dev->name); + goto out; + } + + out: + if (err) { + printk(KERN_WARNING "%s: Resetting instead...\n", dev->name); + schedule_work(&priv->reset_work); + err = 0; + } + return err; +} + +/********************************************************************/ +/* Interrupt handler */ +/********************************************************************/ + +static void __orinoco_ev_tick(struct net_device *dev, struct hermes *hw) +{ + printk(KERN_DEBUG "%s: TICK\n", dev->name); +} + +static void __orinoco_ev_wterr(struct net_device *dev, struct hermes *hw) +{ + /* This seems to happen a fair bit under load, but ignoring it + seems to work fine...*/ + printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n", + dev->name); +} + +irqreturn_t orinoco_interrupt(int irq, void *dev_id) +{ + struct orinoco_private *priv = dev_id; + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + int count = MAX_IRQLOOPS_PER_IRQ; + u16 evstat, events; + /* These are used to detect a runaway interrupt situation. + * + * If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy, + * we panic and shut down the hardware + */ + /* jiffies value the last time we were called */ + static int last_irq_jiffy; /* = 0 */ + static int loops_this_jiffy; /* = 0 */ + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) { + /* If hw is unavailable - we don't know if the irq was + * for us or not */ + return IRQ_HANDLED; + } + + evstat = hermes_read_regn(hw, EVSTAT); + events = evstat & hw->inten; + if (!events) { + orinoco_unlock(priv, &flags); + return IRQ_NONE; + } + + if (jiffies != last_irq_jiffy) + loops_this_jiffy = 0; + last_irq_jiffy = jiffies; + + while (events && count--) { + if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) { + printk(KERN_WARNING "%s: IRQ handler is looping too " + "much! Resetting.\n", dev->name); + /* Disable interrupts for now */ + hermes_set_irqmask(hw, 0); + schedule_work(&priv->reset_work); + break; + } + + /* Check the card hasn't been removed */ + if (!hermes_present(hw)) { + DEBUG(0, "orinoco_interrupt(): card removed\n"); + break; + } + + if (events & HERMES_EV_TICK) + __orinoco_ev_tick(dev, hw); + if (events & HERMES_EV_WTERR) + __orinoco_ev_wterr(dev, hw); + if (events & HERMES_EV_INFDROP) + __orinoco_ev_infdrop(dev, hw); + if (events & HERMES_EV_INFO) + __orinoco_ev_info(dev, hw); + if (events & HERMES_EV_RX) + __orinoco_ev_rx(dev, hw); + if (events & HERMES_EV_TXEXC) + __orinoco_ev_txexc(dev, hw); + if (events & HERMES_EV_TX) + __orinoco_ev_tx(dev, hw); + if (events & HERMES_EV_ALLOC) + __orinoco_ev_alloc(dev, hw); + + hermes_write_regn(hw, EVACK, evstat); + + evstat = hermes_read_regn(hw, EVSTAT); + events = evstat & hw->inten; + } + + orinoco_unlock(priv, &flags); + return IRQ_HANDLED; +} +EXPORT_SYMBOL(orinoco_interrupt); + +/********************************************************************/ +/* Power management */ +/********************************************************************/ +#if defined(CONFIG_PM_SLEEP) && !defined(CONFIG_HERMES_CACHE_FW_ON_INIT) +static int orinoco_pm_notifier(struct notifier_block *notifier, + unsigned long pm_event, + void *unused) +{ + struct orinoco_private *priv = container_of(notifier, + struct orinoco_private, + pm_notifier); + + /* All we need to do is cache the firmware before suspend, and + * release it when we come out. + * + * Only need to do this if we're downloading firmware. */ + if (!priv->do_fw_download) + return NOTIFY_DONE; + + switch (pm_event) { + case PM_HIBERNATION_PREPARE: + case PM_SUSPEND_PREPARE: + orinoco_cache_fw(priv, 0); + break; + + case PM_POST_RESTORE: + /* Restore from hibernation failed. We need to clean + * up in exactly the same way, so fall through. */ + case PM_POST_HIBERNATION: + case PM_POST_SUSPEND: + orinoco_uncache_fw(priv); + break; + + case PM_RESTORE_PREPARE: + default: + break; + } + + return NOTIFY_DONE; +} + +static void orinoco_register_pm_notifier(struct orinoco_private *priv) +{ + priv->pm_notifier.notifier_call = orinoco_pm_notifier; + register_pm_notifier(&priv->pm_notifier); +} + +static void orinoco_unregister_pm_notifier(struct orinoco_private *priv) +{ + unregister_pm_notifier(&priv->pm_notifier); +} +#else /* !PM_SLEEP || HERMES_CACHE_FW_ON_INIT */ +#define orinoco_register_pm_notifier(priv) do { } while (0) +#define orinoco_unregister_pm_notifier(priv) do { } while (0) +#endif + +/********************************************************************/ +/* Initialization */ +/********************************************************************/ + +int orinoco_init(struct orinoco_private *priv) +{ + struct device *dev = priv->dev; + struct wiphy *wiphy = priv_to_wiphy(priv); + struct hermes *hw = &priv->hw; + int err = 0; + + /* No need to lock, the hw_unavailable flag is already set in + * alloc_orinocodev() */ + priv->nicbuf_size = IEEE80211_MAX_FRAME_LEN + ETH_HLEN; + + /* Initialize the firmware */ + err = hw->ops->init(hw); + if (err != 0) { + dev_err(dev, "Failed to initialize firmware (err = %d)\n", + err); + goto out; + } + + err = determine_fw_capabilities(priv, wiphy->fw_version, + sizeof(wiphy->fw_version), + &wiphy->hw_version); + if (err != 0) { + dev_err(dev, "Incompatible firmware, aborting\n"); + goto out; + } + + if (priv->do_fw_download) { +#ifdef CONFIG_HERMES_CACHE_FW_ON_INIT + orinoco_cache_fw(priv, 0); +#endif + + err = orinoco_download(priv); + if (err) + priv->do_fw_download = 0; + + /* Check firmware version again */ + err = determine_fw_capabilities(priv, wiphy->fw_version, + sizeof(wiphy->fw_version), + &wiphy->hw_version); + if (err != 0) { + dev_err(dev, "Incompatible firmware, aborting\n"); + goto out; + } + } + + if (priv->has_port3) + dev_info(dev, "Ad-hoc demo mode supported\n"); + if (priv->has_ibss) + dev_info(dev, "IEEE standard IBSS ad-hoc mode supported\n"); + if (priv->has_wep) + dev_info(dev, "WEP supported, %s-bit key\n", + priv->has_big_wep ? "104" : "40"); + if (priv->has_wpa) { + dev_info(dev, "WPA-PSK supported\n"); + if (orinoco_mic_init(priv)) { + dev_err(dev, "Failed to setup MIC crypto algorithm. " + "Disabling WPA support\n"); + priv->has_wpa = 0; + } + } + + err = orinoco_hw_read_card_settings(priv, wiphy->perm_addr); + if (err) + goto out; + + err = orinoco_hw_allocate_fid(priv); + if (err) { + dev_err(dev, "Failed to allocate NIC buffer!\n"); + goto out; + } + + /* Set up the default configuration */ + priv->iw_mode = NL80211_IFTYPE_STATION; + /* By default use IEEE/IBSS ad-hoc mode if we have it */ + priv->prefer_port3 = priv->has_port3 && (!priv->has_ibss); + set_port_type(priv); + priv->channel = 0; /* use firmware default */ + + priv->promiscuous = 0; + priv->encode_alg = ORINOCO_ALG_NONE; + priv->tx_key = 0; + priv->wpa_enabled = 0; + priv->tkip_cm_active = 0; + priv->key_mgmt = 0; + priv->wpa_ie_len = 0; + priv->wpa_ie = NULL; + + if (orinoco_wiphy_register(wiphy)) { + err = -ENODEV; + goto out; + } + + /* Make the hardware available, as long as it hasn't been + * removed elsewhere (e.g. by PCMCIA hot unplug) */ + orinoco_lock_irq(priv); + priv->hw_unavailable--; + orinoco_unlock_irq(priv); + + dev_dbg(dev, "Ready\n"); + + out: + return err; +} +EXPORT_SYMBOL(orinoco_init); + +static const struct net_device_ops orinoco_netdev_ops = { + .ndo_open = orinoco_open, + .ndo_stop = orinoco_stop, + .ndo_start_xmit = orinoco_xmit, + .ndo_set_rx_mode = orinoco_set_multicast_list, + .ndo_change_mtu = orinoco_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_tx_timeout = orinoco_tx_timeout, + .ndo_get_stats = orinoco_get_stats, +}; + +/* Allocate private data. + * + * This driver has a number of structures associated with it + * netdev - Net device structure for each network interface + * wiphy - structure associated with wireless phy + * wireless_dev (wdev) - structure for each wireless interface + * hw - structure for hermes chip info + * card - card specific structure for use by the card driver + * (airport, orinoco_cs) + * priv - orinoco private data + * device - generic linux device structure + * + * +---------+ +---------+ + * | wiphy | | netdev | + * | +-------+ | +-------+ + * | | priv | | | wdev | + * | | +-----+ +-+-------+ + * | | | hw | + * | +-+-----+ + * | | card | + * +-+-------+ + * + * priv has a link to netdev and device + * wdev has a link to wiphy + */ +struct orinoco_private +*alloc_orinocodev(int sizeof_card, + struct device *device, + int (*hard_reset)(struct orinoco_private *), + int (*stop_fw)(struct orinoco_private *, int)) +{ + struct orinoco_private *priv; + struct wiphy *wiphy; + + /* allocate wiphy + * NOTE: We only support a single virtual interface + * but this may change when monitor mode is added + */ + wiphy = wiphy_new(&orinoco_cfg_ops, + sizeof(struct orinoco_private) + sizeof_card); + if (!wiphy) + return NULL; + + priv = wiphy_priv(wiphy); + priv->dev = device; + + if (sizeof_card) + priv->card = (void *)((unsigned long)priv + + sizeof(struct orinoco_private)); + else + priv->card = NULL; + + orinoco_wiphy_init(wiphy); + +#ifdef WIRELESS_SPY + priv->wireless_data.spy_data = &priv->spy_data; +#endif + + /* Set up default callbacks */ + priv->hard_reset = hard_reset; + priv->stop_fw = stop_fw; + + spin_lock_init(&priv->lock); + priv->open = 0; + priv->hw_unavailable = 1; /* orinoco_init() must clear this + * before anything else touches the + * hardware */ + INIT_WORK(&priv->reset_work, orinoco_reset); + INIT_WORK(&priv->join_work, orinoco_join_ap); + INIT_WORK(&priv->wevent_work, orinoco_send_wevents); + + INIT_LIST_HEAD(&priv->rx_list); + tasklet_init(&priv->rx_tasklet, orinoco_rx_isr_tasklet, + (unsigned long) priv); + + spin_lock_init(&priv->scan_lock); + INIT_LIST_HEAD(&priv->scan_list); + INIT_WORK(&priv->process_scan, orinoco_process_scan_results); + + priv->last_linkstatus = 0xffff; + +#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) + priv->cached_pri_fw = NULL; + priv->cached_fw = NULL; +#endif + + /* Register PM notifiers */ + orinoco_register_pm_notifier(priv); + + return priv; +} +EXPORT_SYMBOL(alloc_orinocodev); + +/* We can only support a single interface. We provide a separate + * function to set it up to distinguish between hardware + * initialisation and interface setup. + * + * The base_addr and irq parameters are passed on to netdev for use + * with SIOCGIFMAP. + */ +int orinoco_if_add(struct orinoco_private *priv, + unsigned long base_addr, + unsigned int irq, + const struct net_device_ops *ops) +{ + struct wiphy *wiphy = priv_to_wiphy(priv); + struct wireless_dev *wdev; + struct net_device *dev; + int ret; + + dev = alloc_etherdev(sizeof(struct wireless_dev)); + + if (!dev) + return -ENOMEM; + + /* Initialise wireless_dev */ + wdev = netdev_priv(dev); + wdev->wiphy = wiphy; + wdev->iftype = NL80211_IFTYPE_STATION; + + /* Setup / override net_device fields */ + dev->ieee80211_ptr = wdev; + dev->watchdog_timeo = HZ; /* 1 second timeout */ + dev->wireless_handlers = &orinoco_handler_def; +#ifdef WIRELESS_SPY + dev->wireless_data = &priv->wireless_data; +#endif + /* Default to standard ops if not set */ + if (ops) + dev->netdev_ops = ops; + else + dev->netdev_ops = &orinoco_netdev_ops; + + /* we use the default eth_mac_addr for setting the MAC addr */ + + /* Reserve space in skb for the SNAP header */ + dev->needed_headroom = ENCAPS_OVERHEAD; + + netif_carrier_off(dev); + + memcpy(dev->dev_addr, wiphy->perm_addr, ETH_ALEN); + + dev->base_addr = base_addr; + dev->irq = irq; + + SET_NETDEV_DEV(dev, priv->dev); + ret = register_netdev(dev); + if (ret) + goto fail; + + priv->ndev = dev; + + /* Report what we've done */ + dev_dbg(priv->dev, "Registerred interface %s.\n", dev->name); + + return 0; + + fail: + free_netdev(dev); + return ret; +} +EXPORT_SYMBOL(orinoco_if_add); + +void orinoco_if_del(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + + unregister_netdev(dev); + free_netdev(dev); +} +EXPORT_SYMBOL(orinoco_if_del); + +void free_orinocodev(struct orinoco_private *priv) +{ + struct wiphy *wiphy = priv_to_wiphy(priv); + struct orinoco_rx_data *rx_data, *temp; + struct orinoco_scan_data *sd, *sdtemp; + + wiphy_unregister(wiphy); + + /* If the tasklet is scheduled when we call tasklet_kill it + * will run one final time. However the tasklet will only + * drain priv->rx_list if the hw is still available. */ + tasklet_kill(&priv->rx_tasklet); + + /* Explicitly drain priv->rx_list */ + list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) { + list_del(&rx_data->list); + + dev_kfree_skb(rx_data->skb); + kfree(rx_data->desc); + kfree(rx_data); + } + + cancel_work_sync(&priv->process_scan); + /* Explicitly drain priv->scan_list */ + list_for_each_entry_safe(sd, sdtemp, &priv->scan_list, list) { + list_del(&sd->list); + + if ((sd->len > 0) && sd->buf) + kfree(sd->buf); + kfree(sd); + } + + orinoco_unregister_pm_notifier(priv); + orinoco_uncache_fw(priv); + + priv->wpa_ie_len = 0; + kfree(priv->wpa_ie); + orinoco_mic_free(priv); + wiphy_free(wiphy); +} +EXPORT_SYMBOL(free_orinocodev); + +int orinoco_up(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + unsigned long flags; + int err; + + priv->hw.ops->lock_irqsave(&priv->lock, &flags); + + err = orinoco_reinit_firmware(priv); + if (err) { + printk(KERN_ERR "%s: Error %d re-initializing firmware\n", + dev->name, err); + goto exit; + } + + netif_device_attach(dev); + priv->hw_unavailable--; + + if (priv->open && !priv->hw_unavailable) { + err = __orinoco_up(priv); + if (err) + printk(KERN_ERR "%s: Error %d restarting card\n", + dev->name, err); + } + +exit: + priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); + + return 0; +} +EXPORT_SYMBOL(orinoco_up); + +void orinoco_down(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + unsigned long flags; + int err; + + priv->hw.ops->lock_irqsave(&priv->lock, &flags); + err = __orinoco_down(priv); + if (err) + printk(KERN_WARNING "%s: Error %d downing interface\n", + dev->name, err); + + netif_device_detach(dev); + priv->hw_unavailable++; + priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); +} +EXPORT_SYMBOL(orinoco_down); + +/********************************************************************/ +/* Module initialization */ +/********************************************************************/ + +/* Can't be declared "const" or the whole __initdata section will + * become const */ +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (David Gibson <hermes@gibson.dropbear.id.au>, " + "Pavel Roskin <proski@gnu.org>, et al)"; + +static int __init init_orinoco(void) +{ + printk(KERN_DEBUG "%s\n", version); + return 0; +} + +static void __exit exit_orinoco(void) +{ +} + +module_init(init_orinoco); +module_exit(exit_orinoco); diff --git a/drivers/net/wireless/orinoco/main.h b/drivers/net/wireless/orinoco/main.h new file mode 100644 index 00000000000..5a8fec26136 --- /dev/null +++ b/drivers/net/wireless/orinoco/main.h @@ -0,0 +1,50 @@ +/* Exports from main to helper modules + * + * See copyright notice in main.c + */ +#ifndef _ORINOCO_MAIN_H_ +#define _ORINOCO_MAIN_H_ + +#include <linux/ieee80211.h> +#include "orinoco.h" + +/********************************************************************/ +/* Compile time configuration and compatibility stuff */ +/********************************************************************/ + +/* We do this this way to avoid ifdefs in the actual code */ +#ifdef WIRELESS_SPY +#define SPY_NUMBER(priv) (priv->spy_data.spy_number) +#else +#define SPY_NUMBER(priv) 0 +#endif /* WIRELESS_SPY */ + +/********************************************************************/ + +/* Export module parameter */ +extern int force_monitor; + +/* Forward declarations */ +struct net_device; +struct work_struct; + +void set_port_type(struct orinoco_private *priv); +int orinoco_commit(struct orinoco_private *priv); +void orinoco_reset(struct work_struct *work); + +/* Information element helpers - find a home for these... */ +#define WPA_OUI_TYPE "\x00\x50\xF2\x01" +#define WPA_SELECTOR_LEN 4 +static inline u8 *orinoco_get_wpa_ie(u8 *data, size_t len) +{ + u8 *p = data; + while ((p + 2 + WPA_SELECTOR_LEN) < (data + len)) { + if ((p[0] == WLAN_EID_VENDOR_SPECIFIC) && + (memcmp(&p[2], WPA_OUI_TYPE, WPA_SELECTOR_LEN) == 0)) + return p; + p += p[1] + 2; + } + return NULL; +} + +#endif /* _ORINOCO_MAIN_H_ */ diff --git a/drivers/net/wireless/orinoco/mic.c b/drivers/net/wireless/orinoco/mic.c new file mode 100644 index 00000000000..fce4a843e65 --- /dev/null +++ b/drivers/net/wireless/orinoco/mic.c @@ -0,0 +1,79 @@ +/* Orinoco MIC helpers + * + * See copyright notice in main.c + */ +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/if_ether.h> +#include <linux/scatterlist.h> +#include <linux/crypto.h> + +#include "orinoco.h" +#include "mic.h" + +/********************************************************************/ +/* Michael MIC crypto setup */ +/********************************************************************/ +int orinoco_mic_init(struct orinoco_private *priv) +{ + priv->tx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0); + if (IS_ERR(priv->tx_tfm_mic)) { + printk(KERN_DEBUG "orinoco_mic_init: could not allocate " + "crypto API michael_mic\n"); + priv->tx_tfm_mic = NULL; + return -ENOMEM; + } + + priv->rx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0); + if (IS_ERR(priv->rx_tfm_mic)) { + printk(KERN_DEBUG "orinoco_mic_init: could not allocate " + "crypto API michael_mic\n"); + priv->rx_tfm_mic = NULL; + return -ENOMEM; + } + + return 0; +} + +void orinoco_mic_free(struct orinoco_private *priv) +{ + if (priv->tx_tfm_mic) + crypto_free_hash(priv->tx_tfm_mic); + if (priv->rx_tfm_mic) + crypto_free_hash(priv->rx_tfm_mic); +} + +int orinoco_mic(struct crypto_hash *tfm_michael, u8 *key, + u8 *da, u8 *sa, u8 priority, + u8 *data, size_t data_len, u8 *mic) +{ + struct hash_desc desc; + struct scatterlist sg[2]; + u8 hdr[ETH_HLEN + 2]; /* size of header + padding */ + + if (tfm_michael == NULL) { + printk(KERN_WARNING "orinoco_mic: tfm_michael == NULL\n"); + return -1; + } + + /* Copy header into buffer. We need the padding on the end zeroed */ + memcpy(&hdr[0], da, ETH_ALEN); + memcpy(&hdr[ETH_ALEN], sa, ETH_ALEN); + hdr[ETH_ALEN * 2] = priority; + hdr[ETH_ALEN * 2 + 1] = 0; + hdr[ETH_ALEN * 2 + 2] = 0; + hdr[ETH_ALEN * 2 + 3] = 0; + + /* Use scatter gather to MIC header and data in one go */ + sg_init_table(sg, 2); + sg_set_buf(&sg[0], hdr, sizeof(hdr)); + sg_set_buf(&sg[1], data, data_len); + + if (crypto_hash_setkey(tfm_michael, key, MIC_KEYLEN)) + return -1; + + desc.tfm = tfm_michael; + desc.flags = 0; + return crypto_hash_digest(&desc, sg, data_len + sizeof(hdr), + mic); +} diff --git a/drivers/net/wireless/orinoco/mic.h b/drivers/net/wireless/orinoco/mic.h new file mode 100644 index 00000000000..04d05bc566d --- /dev/null +++ b/drivers/net/wireless/orinoco/mic.h @@ -0,0 +1,22 @@ +/* Orinoco MIC helpers + * + * See copyright notice in main.c + */ +#ifndef _ORINOCO_MIC_H_ +#define _ORINOCO_MIC_H_ + +#include <linux/types.h> + +#define MICHAEL_MIC_LEN 8 + +/* Forward declarations */ +struct orinoco_private; +struct crypto_hash; + +int orinoco_mic_init(struct orinoco_private *priv); +void orinoco_mic_free(struct orinoco_private *priv); +int orinoco_mic(struct crypto_hash *tfm_michael, u8 *key, + u8 *da, u8 *sa, u8 priority, + u8 *data, size_t data_len, u8 *mic); + +#endif /* ORINOCO_MIC_H */ diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c deleted file mode 100644 index 067d1a9c728..00000000000 --- a/drivers/net/wireless/orinoco/orinoco.c +++ /dev/null @@ -1,6159 +0,0 @@ -/* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c) - * - * A driver for Hermes or Prism 2 chipset based PCMCIA wireless - * adaptors, with Lucent/Agere, Intersil or Symbol firmware. - * - * Current maintainers (as of 29 September 2003) are: - * Pavel Roskin <proski AT gnu.org> - * and David Gibson <hermes AT gibson.dropbear.id.au> - * - * (C) Copyright David Gibson, IBM Corporation 2001-2003. - * Copyright (C) 2000 David Gibson, Linuxcare Australia. - * With some help from : - * Copyright (C) 2001 Jean Tourrilhes, HP Labs - * Copyright (C) 2001 Benjamin Herrenschmidt - * - * Based on dummy_cs.c 1.27 2000/06/12 21:27:25 - * - * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy - * AT fasta.fh-dortmund.de> - * http://www.stud.fh-dortmund.de/~andy/wvlan/ - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * The initial developer of the original code is David A. Hinds - * <dahinds AT users.sourceforge.net>. Portions created by David - * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights - * Reserved. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. */ - -/* - * TODO - * o Handle de-encapsulation within network layer, provide 802.11 - * headers (patch from Thomas 'Dent' Mirlacher) - * o Fix possible races in SPY handling. - * o Disconnect wireless extensions from fundamental configuration. - * o (maybe) Software WEP support (patch from Stano Meduna). - * o (maybe) Use multiple Tx buffers - driver handling queue - * rather than firmware. - */ - -/* Locking and synchronization: - * - * The basic principle is that everything is serialized through a - * single spinlock, priv->lock. The lock is used in user, bh and irq - * context, so when taken outside hardirq context it should always be - * taken with interrupts disabled. The lock protects both the - * hardware and the struct orinoco_private. - * - * Another flag, priv->hw_unavailable indicates that the hardware is - * unavailable for an extended period of time (e.g. suspended, or in - * the middle of a hard reset). This flag is protected by the - * spinlock. All code which touches the hardware should check the - * flag after taking the lock, and if it is set, give up on whatever - * they are doing and drop the lock again. The orinoco_lock() - * function handles this (it unlocks and returns -EBUSY if - * hw_unavailable is non-zero). - */ - -#define DRIVER_NAME "orinoco" - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/ethtool.h> -#include <linux/firmware.h> -#include <linux/suspend.h> -#include <linux/if_arp.h> -#include <linux/wireless.h> -#include <linux/ieee80211.h> -#include <net/iw_handler.h> - -#include <linux/scatterlist.h> -#include <linux/crypto.h> - -#include "hermes_rid.h" -#include "hermes_dld.h" -#include "orinoco.h" - -/********************************************************************/ -/* Module information */ -/********************************************************************/ - -MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>"); -MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards"); -MODULE_LICENSE("Dual MPL/GPL"); - -/* Level of debugging. Used in the macros in orinoco.h */ -#ifdef ORINOCO_DEBUG -int orinoco_debug = ORINOCO_DEBUG; -module_param(orinoco_debug, int, 0644); -MODULE_PARM_DESC(orinoco_debug, "Debug level"); -EXPORT_SYMBOL(orinoco_debug); -#endif - -static int suppress_linkstatus; /* = 0 */ -module_param(suppress_linkstatus, bool, 0644); -MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes"); -static int ignore_disconnect; /* = 0 */ -module_param(ignore_disconnect, int, 0644); -MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer"); - -static int force_monitor; /* = 0 */ -module_param(force_monitor, int, 0644); -MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions"); - -/********************************************************************/ -/* Compile time configuration and compatibility stuff */ -/********************************************************************/ - -/* We do this this way to avoid ifdefs in the actual code */ -#ifdef WIRELESS_SPY -#define SPY_NUMBER(priv) (priv->spy_data.spy_number) -#else -#define SPY_NUMBER(priv) 0 -#endif /* WIRELESS_SPY */ - -/********************************************************************/ -/* Internal constants */ -/********************************************************************/ - -/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ -static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; -#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) - -#define ORINOCO_MIN_MTU 256 -#define ORINOCO_MAX_MTU (IEEE80211_MAX_DATA_LEN - ENCAPS_OVERHEAD) - -#define SYMBOL_MAX_VER_LEN (14) -#define USER_BAP 0 -#define IRQ_BAP 1 -#define MAX_IRQLOOPS_PER_IRQ 10 -#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of - * how many events the - * device could - * legitimately generate */ -#define SMALL_KEY_SIZE 5 -#define LARGE_KEY_SIZE 13 -#define TX_NICBUF_SIZE_BUG 1585 /* Bug in Symbol firmware */ - -#define DUMMY_FID 0xFFFF - -/*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \ - HERMES_MAX_MULTICAST : 0)*/ -#define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST) - -#define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \ - | HERMES_EV_TX | HERMES_EV_TXEXC \ - | HERMES_EV_WTERR | HERMES_EV_INFO \ - | HERMES_EV_INFDROP ) - -#define MAX_RID_LEN 1024 - -static const struct iw_handler_def orinoco_handler_def; -static const struct ethtool_ops orinoco_ethtool_ops; - -/********************************************************************/ -/* Data tables */ -/********************************************************************/ - -/* The frequency of each channel in MHz */ -static const long channel_frequency[] = { - 2412, 2417, 2422, 2427, 2432, 2437, 2442, - 2447, 2452, 2457, 2462, 2467, 2472, 2484 -}; -#define NUM_CHANNELS ARRAY_SIZE(channel_frequency) - -/* This tables gives the actual meanings of the bitrate IDs returned - * by the firmware. */ -static struct { - int bitrate; /* in 100s of kilobits */ - int automatic; - u16 agere_txratectrl; - u16 intersil_txratectrl; -} bitrate_table[] = { - {110, 1, 3, 15}, /* Entry 0 is the default */ - {10, 0, 1, 1}, - {10, 1, 1, 1}, - {20, 0, 2, 2}, - {20, 1, 6, 3}, - {55, 0, 4, 4}, - {55, 1, 7, 7}, - {110, 0, 5, 8}, -}; -#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table) - -/********************************************************************/ -/* Data types */ -/********************************************************************/ - -/* Beginning of the Tx descriptor, used in TxExc handling */ -struct hermes_txexc_data { - struct hermes_tx_descriptor desc; - __le16 frame_ctl; - __le16 duration_id; - u8 addr1[ETH_ALEN]; -} __attribute__ ((packed)); - -/* Rx frame header except compatibility 802.3 header */ -struct hermes_rx_descriptor { - /* Control */ - __le16 status; - __le32 time; - u8 silence; - u8 signal; - u8 rate; - u8 rxflow; - __le32 reserved; - - /* 802.11 header */ - __le16 frame_ctl; - __le16 duration_id; - u8 addr1[ETH_ALEN]; - u8 addr2[ETH_ALEN]; - u8 addr3[ETH_ALEN]; - __le16 seq_ctl; - u8 addr4[ETH_ALEN]; - - /* Data length */ - __le16 data_len; -} __attribute__ ((packed)); - -/********************************************************************/ -/* Function prototypes */ -/********************************************************************/ - -static int __orinoco_program_rids(struct net_device *dev); -static void __orinoco_set_multicast_list(struct net_device *dev); - -/********************************************************************/ -/* Michael MIC crypto setup */ -/********************************************************************/ -#define MICHAEL_MIC_LEN 8 -static int orinoco_mic_init(struct orinoco_private *priv) -{ - priv->tx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0); - if (IS_ERR(priv->tx_tfm_mic)) { - printk(KERN_DEBUG "orinoco_mic_init: could not allocate " - "crypto API michael_mic\n"); - priv->tx_tfm_mic = NULL; - return -ENOMEM; - } - - priv->rx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0); - if (IS_ERR(priv->rx_tfm_mic)) { - printk(KERN_DEBUG "orinoco_mic_init: could not allocate " - "crypto API michael_mic\n"); - priv->rx_tfm_mic = NULL; - return -ENOMEM; - } - - return 0; -} - -static void orinoco_mic_free(struct orinoco_private *priv) -{ - if (priv->tx_tfm_mic) - crypto_free_hash(priv->tx_tfm_mic); - if (priv->rx_tfm_mic) - crypto_free_hash(priv->rx_tfm_mic); -} - -static int michael_mic(struct crypto_hash *tfm_michael, u8 *key, - u8 *da, u8 *sa, u8 priority, - u8 *data, size_t data_len, u8 *mic) -{ - struct hash_desc desc; - struct scatterlist sg[2]; - u8 hdr[ETH_HLEN + 2]; /* size of header + padding */ - - if (tfm_michael == NULL) { - printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n"); - return -1; - } - - /* Copy header into buffer. We need the padding on the end zeroed */ - memcpy(&hdr[0], da, ETH_ALEN); - memcpy(&hdr[ETH_ALEN], sa, ETH_ALEN); - hdr[ETH_ALEN*2] = priority; - hdr[ETH_ALEN*2+1] = 0; - hdr[ETH_ALEN*2+2] = 0; - hdr[ETH_ALEN*2+3] = 0; - - /* Use scatter gather to MIC header and data in one go */ - sg_init_table(sg, 2); - sg_set_buf(&sg[0], hdr, sizeof(hdr)); - sg_set_buf(&sg[1], data, data_len); - - if (crypto_hash_setkey(tfm_michael, key, MIC_KEYLEN)) - return -1; - - desc.tfm = tfm_michael; - desc.flags = 0; - return crypto_hash_digest(&desc, sg, data_len + sizeof(hdr), - mic); -} - -/********************************************************************/ -/* Internal helper functions */ -/********************************************************************/ - -static inline void set_port_type(struct orinoco_private *priv) -{ - switch (priv->iw_mode) { - case IW_MODE_INFRA: - priv->port_type = 1; - priv->createibss = 0; - break; - case IW_MODE_ADHOC: - if (priv->prefer_port3) { - priv->port_type = 3; - priv->createibss = 0; - } else { - priv->port_type = priv->ibss_port; - priv->createibss = 1; - } - break; - case IW_MODE_MONITOR: - priv->port_type = 3; - priv->createibss = 0; - break; - default: - printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n", - priv->ndev->name); - } -} - -#define ORINOCO_MAX_BSS_COUNT 64 -static int orinoco_bss_data_allocate(struct orinoco_private *priv) -{ - if (priv->bss_xbss_data) - return 0; - - if (priv->has_ext_scan) - priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT * - sizeof(struct xbss_element), - GFP_KERNEL); - else - priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT * - sizeof(struct bss_element), - GFP_KERNEL); - - if (!priv->bss_xbss_data) { - printk(KERN_WARNING "Out of memory allocating beacons"); - return -ENOMEM; - } - return 0; -} - -static void orinoco_bss_data_free(struct orinoco_private *priv) -{ - kfree(priv->bss_xbss_data); - priv->bss_xbss_data = NULL; -} - -#define PRIV_BSS ((struct bss_element *)priv->bss_xbss_data) -#define PRIV_XBSS ((struct xbss_element *)priv->bss_xbss_data) -static void orinoco_bss_data_init(struct orinoco_private *priv) -{ - int i; - - INIT_LIST_HEAD(&priv->bss_free_list); - INIT_LIST_HEAD(&priv->bss_list); - if (priv->has_ext_scan) - for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++) - list_add_tail(&(PRIV_XBSS[i].list), - &priv->bss_free_list); - else - for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++) - list_add_tail(&(PRIV_BSS[i].list), - &priv->bss_free_list); - -} - -static inline u8 *orinoco_get_ie(u8 *data, size_t len, - enum ieee80211_eid eid) -{ - u8 *p = data; - while ((p + 2) < (data + len)) { - if (p[0] == eid) - return p; - p += p[1] + 2; - } - return NULL; -} - -#define WPA_OUI_TYPE "\x00\x50\xF2\x01" -#define WPA_SELECTOR_LEN 4 -static inline u8 *orinoco_get_wpa_ie(u8 *data, size_t len) -{ - u8 *p = data; - while ((p + 2 + WPA_SELECTOR_LEN) < (data + len)) { - if ((p[0] == WLAN_EID_GENERIC) && - (memcmp(&p[2], WPA_OUI_TYPE, WPA_SELECTOR_LEN) == 0)) - return p; - p += p[1] + 2; - } - return NULL; -} - - -/********************************************************************/ -/* Download functionality */ -/********************************************************************/ - -struct fw_info { - char *pri_fw; - char *sta_fw; - char *ap_fw; - u32 pda_addr; - u16 pda_size; -}; - -const static struct fw_info orinoco_fw[] = { - { NULL, "agere_sta_fw.bin", "agere_ap_fw.bin", 0x00390000, 1000 }, - { NULL, "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 }, - { "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", NULL, 0x00003100, 512 } -}; - -/* Structure used to access fields in FW - * Make sure LE decoding macros are used - */ -struct orinoco_fw_header { - char hdr_vers[6]; /* ASCII string for header version */ - __le16 headersize; /* Total length of header */ - __le32 entry_point; /* NIC entry point */ - __le32 blocks; /* Number of blocks to program */ - __le32 block_offset; /* Offset of block data from eof header */ - __le32 pdr_offset; /* Offset to PDR data from eof header */ - __le32 pri_offset; /* Offset to primary plug data */ - __le32 compat_offset; /* Offset to compatibility data*/ - char signature[0]; /* FW signature length headersize-20 */ -} __attribute__ ((packed)); - -/* Download either STA or AP firmware into the card. */ -static int -orinoco_dl_firmware(struct orinoco_private *priv, - const struct fw_info *fw, - int ap) -{ - /* Plug Data Area (PDA) */ - __le16 *pda; - - hermes_t *hw = &priv->hw; - const struct firmware *fw_entry; - const struct orinoco_fw_header *hdr; - const unsigned char *first_block; - const unsigned char *end; - const char *firmware; - struct net_device *dev = priv->ndev; - int err = 0; - - pda = kzalloc(fw->pda_size, GFP_KERNEL); - if (!pda) - return -ENOMEM; - - if (ap) - firmware = fw->ap_fw; - else - firmware = fw->sta_fw; - - printk(KERN_DEBUG "%s: Attempting to download firmware %s\n", - dev->name, firmware); - - /* Read current plug data */ - err = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 0); - printk(KERN_DEBUG "%s: Read PDA returned %d\n", dev->name, err); - if (err) - goto free; - - if (!priv->cached_fw) { - err = request_firmware(&fw_entry, firmware, priv->dev); - - if (err) { - printk(KERN_ERR "%s: Cannot find firmware %s\n", - dev->name, firmware); - err = -ENOENT; - goto free; - } - } else - fw_entry = priv->cached_fw; - - hdr = (const struct orinoco_fw_header *) fw_entry->data; - - /* Enable aux port to allow programming */ - err = hermesi_program_init(hw, le32_to_cpu(hdr->entry_point)); - printk(KERN_DEBUG "%s: Program init returned %d\n", dev->name, err); - if (err != 0) - goto abort; - - /* Program data */ - first_block = (fw_entry->data + - le16_to_cpu(hdr->headersize) + - le32_to_cpu(hdr->block_offset)); - end = fw_entry->data + fw_entry->size; - - err = hermes_program(hw, first_block, end); - printk(KERN_DEBUG "%s: Program returned %d\n", dev->name, err); - if (err != 0) - goto abort; - - /* Update production data */ - first_block = (fw_entry->data + - le16_to_cpu(hdr->headersize) + - le32_to_cpu(hdr->pdr_offset)); - - err = hermes_apply_pda_with_defaults(hw, first_block, pda); - printk(KERN_DEBUG "%s: Apply PDA returned %d\n", dev->name, err); - if (err) - goto abort; - - /* Tell card we've finished */ - err = hermesi_program_end(hw); - printk(KERN_DEBUG "%s: Program end returned %d\n", dev->name, err); - if (err != 0) - goto abort; - - /* Check if we're running */ - printk(KERN_DEBUG "%s: hermes_present returned %d\n", - dev->name, hermes_present(hw)); - -abort: - /* If we requested the firmware, release it. */ - if (!priv->cached_fw) - release_firmware(fw_entry); - -free: - kfree(pda); - return err; -} - -/* End markers */ -#define TEXT_END 0x1A /* End of text header */ - -/* - * Process a firmware image - stop the card, load the firmware, reset - * the card and make sure it responds. For the secondary firmware take - * care of the PDA - read it and then write it on top of the firmware. - */ -static int -symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw, - const unsigned char *image, const unsigned char *end, - int secondary) -{ - hermes_t *hw = &priv->hw; - int ret = 0; - const unsigned char *ptr; - const unsigned char *first_block; - - /* Plug Data Area (PDA) */ - __le16 *pda = NULL; - - /* Binary block begins after the 0x1A marker */ - ptr = image; - while (*ptr++ != TEXT_END); - first_block = ptr; - - /* Read the PDA from EEPROM */ - if (secondary) { - pda = kzalloc(fw->pda_size, GFP_KERNEL); - if (!pda) - return -ENOMEM; - - ret = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 1); - if (ret) - goto free; - } - - /* Stop the firmware, so that it can be safely rewritten */ - if (priv->stop_fw) { - ret = priv->stop_fw(priv, 1); - if (ret) - goto free; - } - - /* Program the adapter with new firmware */ - ret = hermes_program(hw, first_block, end); - if (ret) - goto free; - - /* Write the PDA to the adapter */ - if (secondary) { - size_t len = hermes_blocks_length(first_block); - ptr = first_block + len; - ret = hermes_apply_pda(hw, ptr, pda); - kfree(pda); - if (ret) - return ret; - } - - /* Run the firmware */ - if (priv->stop_fw) { - ret = priv->stop_fw(priv, 0); - if (ret) - return ret; - } - - /* Reset hermes chip and make sure it responds */ - ret = hermes_init(hw); - - /* hermes_reset() should return 0 with the secondary firmware */ - if (secondary && ret != 0) - return -ENODEV; - - /* And this should work with any firmware */ - if (!hermes_present(hw)) - return -ENODEV; - - return 0; - -free: - kfree(pda); - return ret; -} - - -/* - * Download the firmware into the card, this also does a PCMCIA soft - * reset on the card, to make sure it's in a sane state. - */ -static int -symbol_dl_firmware(struct orinoco_private *priv, - const struct fw_info *fw) -{ - struct net_device *dev = priv->ndev; - int ret; - const struct firmware *fw_entry; - - if (!priv->cached_pri_fw) { - if (request_firmware(&fw_entry, fw->pri_fw, priv->dev) != 0) { - printk(KERN_ERR "%s: Cannot find firmware: %s\n", - dev->name, fw->pri_fw); - return -ENOENT; - } - } else - fw_entry = priv->cached_pri_fw; - - /* Load primary firmware */ - ret = symbol_dl_image(priv, fw, fw_entry->data, - fw_entry->data + fw_entry->size, 0); - - if (!priv->cached_pri_fw) - release_firmware(fw_entry); - if (ret) { - printk(KERN_ERR "%s: Primary firmware download failed\n", - dev->name); - return ret; - } - - if (!priv->cached_fw) { - if (request_firmware(&fw_entry, fw->sta_fw, priv->dev) != 0) { - printk(KERN_ERR "%s: Cannot find firmware: %s\n", - dev->name, fw->sta_fw); - return -ENOENT; - } - } else - fw_entry = priv->cached_fw; - - /* Load secondary firmware */ - ret = symbol_dl_image(priv, fw, fw_entry->data, - fw_entry->data + fw_entry->size, 1); - if (!priv->cached_fw) - release_firmware(fw_entry); - if (ret) { - printk(KERN_ERR "%s: Secondary firmware download failed\n", - dev->name); - } - - return ret; -} - -static int orinoco_download(struct orinoco_private *priv) -{ - int err = 0; - /* Reload firmware */ - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - /* case FIRMWARE_TYPE_INTERSIL: */ - err = orinoco_dl_firmware(priv, - &orinoco_fw[priv->firmware_type], 0); - break; - - case FIRMWARE_TYPE_SYMBOL: - err = symbol_dl_firmware(priv, - &orinoco_fw[priv->firmware_type]); - break; - case FIRMWARE_TYPE_INTERSIL: - break; - } - /* TODO: if we fail we probably need to reinitialise - * the driver */ - - return err; -} - -#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) -static void orinoco_cache_fw(struct orinoco_private *priv, int ap) -{ - const struct firmware *fw_entry = NULL; - const char *pri_fw; - const char *fw; - - pri_fw = orinoco_fw[priv->firmware_type].pri_fw; - if (ap) - fw = orinoco_fw[priv->firmware_type].ap_fw; - else - fw = orinoco_fw[priv->firmware_type].sta_fw; - - if (pri_fw) { - if (request_firmware(&fw_entry, pri_fw, priv->dev) == 0) - priv->cached_pri_fw = fw_entry; - } - - if (fw) { - if (request_firmware(&fw_entry, fw, priv->dev) == 0) - priv->cached_fw = fw_entry; - } -} - -static void orinoco_uncache_fw(struct orinoco_private *priv) -{ - if (priv->cached_pri_fw) - release_firmware(priv->cached_pri_fw); - if (priv->cached_fw) - release_firmware(priv->cached_fw); - - priv->cached_pri_fw = NULL; - priv->cached_fw = NULL; -} -#else -#define orinoco_cache_fw(priv, ap) -#define orinoco_uncache_fw(priv) -#endif - -/********************************************************************/ -/* Device methods */ -/********************************************************************/ - -static int orinoco_open(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - int err; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = __orinoco_up(dev); - - if (! err) - priv->open = 1; - - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_stop(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - int err = 0; - - /* We mustn't use orinoco_lock() here, because we need to be - able to close the interface even if hw_unavailable is set - (e.g. as we're released after a PC Card removal) */ - spin_lock_irq(&priv->lock); - - priv->open = 0; - - err = __orinoco_down(dev); - - spin_unlock_irq(&priv->lock); - - return err; -} - -static struct net_device_stats *orinoco_get_stats(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - - return &priv->stats; -} - -static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - struct iw_statistics *wstats = &priv->wstats; - int err; - unsigned long flags; - - if (! netif_device_present(dev)) { - printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n", - dev->name); - return NULL; /* FIXME: Can we do better than this? */ - } - - /* If busy, return the old stats. Returning NULL may cause - * the interface to disappear from /proc/net/wireless */ - if (orinoco_lock(priv, &flags) != 0) - return wstats; - - /* We can't really wait for the tallies inquiry command to - * complete, so we just use the previous results and trigger - * a new tallies inquiry command for next time - Jean II */ - /* FIXME: Really we should wait for the inquiry to come back - - * as it is the stats we give don't make a whole lot of sense. - * Unfortunately, it's not clear how to do that within the - * wireless extensions framework: I think we're in user - * context, but a lock seems to be held by the time we get in - * here so we're not safe to sleep here. */ - hermes_inquire(hw, HERMES_INQ_TALLIES); - - if (priv->iw_mode == IW_MODE_ADHOC) { - memset(&wstats->qual, 0, sizeof(wstats->qual)); - /* If a spy address is defined, we report stats of the - * first spy address - Jean II */ - if (SPY_NUMBER(priv)) { - wstats->qual.qual = priv->spy_data.spy_stat[0].qual; - wstats->qual.level = priv->spy_data.spy_stat[0].level; - wstats->qual.noise = priv->spy_data.spy_stat[0].noise; - wstats->qual.updated = priv->spy_data.spy_stat[0].updated; - } - } else { - struct { - __le16 qual, signal, noise, unused; - } __attribute__ ((packed)) cq; - - err = HERMES_READ_RECORD(hw, USER_BAP, - HERMES_RID_COMMSQUALITY, &cq); - - if (!err) { - wstats->qual.qual = (int)le16_to_cpu(cq.qual); - wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; - wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; - wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; - } - } - - orinoco_unlock(priv, &flags); - return wstats; -} - -static void orinoco_set_multicast_list(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) { - printk(KERN_DEBUG "%s: orinoco_set_multicast_list() " - "called when hw_unavailable\n", dev->name); - return; - } - - __orinoco_set_multicast_list(dev); - orinoco_unlock(priv, &flags); -} - -static int orinoco_change_mtu(struct net_device *dev, int new_mtu) -{ - struct orinoco_private *priv = netdev_priv(dev); - - if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) ) - return -EINVAL; - - /* MTU + encapsulation + header length */ - if ( (new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) > - (priv->nicbuf_size - ETH_HLEN) ) - return -EINVAL; - - dev->mtu = new_mtu; - - return 0; -} - -/********************************************************************/ -/* Tx path */ -/********************************************************************/ - -static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct net_device_stats *stats = &priv->stats; - hermes_t *hw = &priv->hw; - int err = 0; - u16 txfid = priv->txfid; - struct ethhdr *eh; - int tx_control; - unsigned long flags; - - if (! netif_running(dev)) { - printk(KERN_ERR "%s: Tx on stopped device!\n", - dev->name); - return NETDEV_TX_BUSY; - } - - if (netif_queue_stopped(dev)) { - printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", - dev->name); - return NETDEV_TX_BUSY; - } - - if (orinoco_lock(priv, &flags) != 0) { - printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n", - dev->name); - return NETDEV_TX_BUSY; - } - - if (! netif_carrier_ok(dev) || (priv->iw_mode == IW_MODE_MONITOR)) { - /* Oops, the firmware hasn't established a connection, - silently drop the packet (this seems to be the - safest approach). */ - goto drop; - } - - /* Check packet length */ - if (skb->len < ETH_HLEN) - goto drop; - - tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX; - - if (priv->encode_alg == IW_ENCODE_ALG_TKIP) - tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) | - HERMES_TXCTRL_MIC; - - if (priv->has_alt_txcntl) { - /* WPA enabled firmwares have tx_cntl at the end of - * the 802.11 header. So write zeroed descriptor and - * 802.11 header at the same time - */ - char desc[HERMES_802_3_OFFSET]; - __le16 *txcntl = (__le16 *) &desc[HERMES_TXCNTL2_OFFSET]; - - memset(&desc, 0, sizeof(desc)); - - *txcntl = cpu_to_le16(tx_control); - err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), - txfid, 0); - if (err) { - if (net_ratelimit()) - printk(KERN_ERR "%s: Error %d writing Tx " - "descriptor to BAP\n", dev->name, err); - goto busy; - } - } else { - struct hermes_tx_descriptor desc; - - memset(&desc, 0, sizeof(desc)); - - desc.tx_control = cpu_to_le16(tx_control); - err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), - txfid, 0); - if (err) { - if (net_ratelimit()) - printk(KERN_ERR "%s: Error %d writing Tx " - "descriptor to BAP\n", dev->name, err); - goto busy; - } - - /* Clear the 802.11 header and data length fields - some - * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused - * if this isn't done. */ - hermes_clear_words(hw, HERMES_DATA0, - HERMES_802_3_OFFSET - HERMES_802_11_OFFSET); - } - - eh = (struct ethhdr *)skb->data; - - /* Encapsulate Ethernet-II frames */ - if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */ - struct header_struct { - struct ethhdr eth; /* 802.3 header */ - u8 encap[6]; /* 802.2 header */ - } __attribute__ ((packed)) hdr; - - /* Strip destination and source from the data */ - skb_pull(skb, 2 * ETH_ALEN); - - /* And move them to a separate header */ - memcpy(&hdr.eth, eh, 2 * ETH_ALEN); - hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len); - memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr)); - - /* Insert the SNAP header */ - if (skb_headroom(skb) < sizeof(hdr)) { - printk(KERN_ERR - "%s: Not enough headroom for 802.2 headers %d\n", - dev->name, skb_headroom(skb)); - goto drop; - } - eh = (struct ethhdr *) skb_push(skb, sizeof(hdr)); - memcpy(eh, &hdr, sizeof(hdr)); - } - - err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len, - txfid, HERMES_802_3_OFFSET); - if (err) { - printk(KERN_ERR "%s: Error %d writing packet to BAP\n", - dev->name, err); - goto busy; - } - - /* Calculate Michael MIC */ - if (priv->encode_alg == IW_ENCODE_ALG_TKIP) { - u8 mic_buf[MICHAEL_MIC_LEN + 1]; - u8 *mic; - size_t offset; - size_t len; - - if (skb->len % 2) { - /* MIC start is on an odd boundary */ - mic_buf[0] = skb->data[skb->len - 1]; - mic = &mic_buf[1]; - offset = skb->len - 1; - len = MICHAEL_MIC_LEN + 1; - } else { - mic = &mic_buf[0]; - offset = skb->len; - len = MICHAEL_MIC_LEN; - } - - michael_mic(priv->tx_tfm_mic, - priv->tkip_key[priv->tx_key].tx_mic, - eh->h_dest, eh->h_source, 0 /* priority */, - skb->data + ETH_HLEN, skb->len - ETH_HLEN, mic); - - /* Write the MIC */ - err = hermes_bap_pwrite(hw, USER_BAP, &mic_buf[0], len, - txfid, HERMES_802_3_OFFSET + offset); - if (err) { - printk(KERN_ERR "%s: Error %d writing MIC to BAP\n", - dev->name, err); - goto busy; - } - } - - /* Finally, we actually initiate the send */ - netif_stop_queue(dev); - - err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL, - txfid, NULL); - if (err) { - netif_start_queue(dev); - if (net_ratelimit()) - printk(KERN_ERR "%s: Error %d transmitting packet\n", - dev->name, err); - goto busy; - } - - dev->trans_start = jiffies; - stats->tx_bytes += HERMES_802_3_OFFSET + skb->len; - goto ok; - - drop: - stats->tx_errors++; - stats->tx_dropped++; - - ok: - orinoco_unlock(priv, &flags); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - - busy: - if (err == -EIO) - schedule_work(&priv->reset_work); - orinoco_unlock(priv, &flags); - return NETDEV_TX_BUSY; -} - -static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw) -{ - struct orinoco_private *priv = netdev_priv(dev); - u16 fid = hermes_read_regn(hw, ALLOCFID); - - if (fid != priv->txfid) { - if (fid != DUMMY_FID) - printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n", - dev->name, fid); - return; - } - - hermes_write_regn(hw, ALLOCFID, DUMMY_FID); -} - -static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct net_device_stats *stats = &priv->stats; - - stats->tx_packets++; - - netif_wake_queue(dev); - - hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); -} - -static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct net_device_stats *stats = &priv->stats; - u16 fid = hermes_read_regn(hw, TXCOMPLFID); - u16 status; - struct hermes_txexc_data hdr; - int err = 0; - - if (fid == DUMMY_FID) - return; /* Nothing's really happened */ - - /* Read part of the frame header - we need status and addr1 */ - err = hermes_bap_pread(hw, IRQ_BAP, &hdr, - sizeof(struct hermes_txexc_data), - fid, 0); - - hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); - stats->tx_errors++; - - if (err) { - printk(KERN_WARNING "%s: Unable to read descriptor on Tx error " - "(FID=%04X error %d)\n", - dev->name, fid, err); - return; - } - - DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name, - err, fid); - - /* We produce a TXDROP event only for retry or lifetime - * exceeded, because that's the only status that really mean - * that this particular node went away. - * Other errors means that *we* screwed up. - Jean II */ - status = le16_to_cpu(hdr.desc.status); - if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) { - union iwreq_data wrqu; - - /* Copy 802.11 dest address. - * We use the 802.11 header because the frame may - * not be 802.3 or may be mangled... - * In Ad-Hoc mode, it will be the node address. - * In managed mode, it will be most likely the AP addr - * User space will figure out how to convert it to - * whatever it needs (IP address or else). - * - Jean II */ - memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN); - wrqu.addr.sa_family = ARPHRD_ETHER; - - /* Send event to user space */ - wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL); - } - - netif_wake_queue(dev); -} - -static void orinoco_tx_timeout(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct net_device_stats *stats = &priv->stats; - struct hermes *hw = &priv->hw; - - printk(KERN_WARNING "%s: Tx timeout! " - "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n", - dev->name, hermes_read_regn(hw, ALLOCFID), - hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT)); - - stats->tx_errors++; - - schedule_work(&priv->reset_work); -} - -/********************************************************************/ -/* Rx path (data frames) */ -/********************************************************************/ - -/* Does the frame have a SNAP header indicating it should be - * de-encapsulated to Ethernet-II? */ -static inline int is_ethersnap(void *_hdr) -{ - u8 *hdr = _hdr; - - /* We de-encapsulate all packets which, a) have SNAP headers - * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header - * and where b) the OUI of the SNAP header is 00:00:00 or - * 00:00:f8 - we need both because different APs appear to use - * different OUIs for some reason */ - return (memcmp(hdr, &encaps_hdr, 5) == 0) - && ( (hdr[5] == 0x00) || (hdr[5] == 0xf8) ); -} - -static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac, - int level, int noise) -{ - struct iw_quality wstats; - wstats.level = level - 0x95; - wstats.noise = noise - 0x95; - wstats.qual = (level > noise) ? (level - noise) : 0; - wstats.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; - /* Update spy records */ - wireless_spy_update(dev, mac, &wstats); -} - -static void orinoco_stat_gather(struct net_device *dev, - struct sk_buff *skb, - struct hermes_rx_descriptor *desc) -{ - struct orinoco_private *priv = netdev_priv(dev); - - /* Using spy support with lots of Rx packets, like in an - * infrastructure (AP), will really slow down everything, because - * the MAC address must be compared to each entry of the spy list. - * If the user really asks for it (set some address in the - * spy list), we do it, but he will pay the price. - * Note that to get here, you need both WIRELESS_SPY - * compiled in AND some addresses in the list !!! - */ - /* Note : gcc will optimise the whole section away if - * WIRELESS_SPY is not defined... - Jean II */ - if (SPY_NUMBER(priv)) { - orinoco_spy_gather(dev, skb_mac_header(skb) + ETH_ALEN, - desc->signal, desc->silence); - } -} - -/* - * orinoco_rx_monitor - handle received monitor frames. - * - * Arguments: - * dev network device - * rxfid received FID - * desc rx descriptor of the frame - * - * Call context: interrupt - */ -static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid, - struct hermes_rx_descriptor *desc) -{ - u32 hdrlen = 30; /* return full header by default */ - u32 datalen = 0; - u16 fc; - int err; - int len; - struct sk_buff *skb; - struct orinoco_private *priv = netdev_priv(dev); - struct net_device_stats *stats = &priv->stats; - hermes_t *hw = &priv->hw; - - len = le16_to_cpu(desc->data_len); - - /* Determine the size of the header and the data */ - fc = le16_to_cpu(desc->frame_ctl); - switch (fc & IEEE80211_FCTL_FTYPE) { - case IEEE80211_FTYPE_DATA: - if ((fc & IEEE80211_FCTL_TODS) - && (fc & IEEE80211_FCTL_FROMDS)) - hdrlen = 30; - else - hdrlen = 24; - datalen = len; - break; - case IEEE80211_FTYPE_MGMT: - hdrlen = 24; - datalen = len; - break; - case IEEE80211_FTYPE_CTL: - switch (fc & IEEE80211_FCTL_STYPE) { - case IEEE80211_STYPE_PSPOLL: - case IEEE80211_STYPE_RTS: - case IEEE80211_STYPE_CFEND: - case IEEE80211_STYPE_CFENDACK: - hdrlen = 16; - break; - case IEEE80211_STYPE_CTS: - case IEEE80211_STYPE_ACK: - hdrlen = 10; - break; - } - break; - default: - /* Unknown frame type */ - break; - } - - /* sanity check the length */ - if (datalen > IEEE80211_MAX_DATA_LEN + 12) { - printk(KERN_DEBUG "%s: oversized monitor frame, " - "data length = %d\n", dev->name, datalen); - stats->rx_length_errors++; - goto update_stats; - } - - skb = dev_alloc_skb(hdrlen + datalen); - if (!skb) { - printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n", - dev->name); - goto update_stats; - } - - /* Copy the 802.11 header to the skb */ - memcpy(skb_put(skb, hdrlen), &(desc->frame_ctl), hdrlen); - skb_reset_mac_header(skb); - - /* If any, copy the data from the card to the skb */ - if (datalen > 0) { - err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, datalen), - ALIGN(datalen, 2), rxfid, - HERMES_802_2_OFFSET); - if (err) { - printk(KERN_ERR "%s: error %d reading monitor frame\n", - dev->name, err); - goto drop; - } - } - - skb->dev = dev; - skb->ip_summed = CHECKSUM_NONE; - skb->pkt_type = PACKET_OTHERHOST; - skb->protocol = __constant_htons(ETH_P_802_2); - - stats->rx_packets++; - stats->rx_bytes += skb->len; - - netif_rx(skb); - return; - - drop: - dev_kfree_skb_irq(skb); - update_stats: - stats->rx_errors++; - stats->rx_dropped++; -} - -/* Get tsc from the firmware */ -static int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, - u8 *tsc) -{ - hermes_t *hw = &priv->hw; - int err = 0; - u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE]; - - if ((key < 0) || (key > 4)) - return -EINVAL; - - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV, - sizeof(tsc_arr), NULL, &tsc_arr); - if (!err) - memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0])); - - return err; -} - -static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct net_device_stats *stats = &priv->stats; - struct iw_statistics *wstats = &priv->wstats; - struct sk_buff *skb = NULL; - u16 rxfid, status; - int length; - struct hermes_rx_descriptor *desc; - struct orinoco_rx_data *rx_data; - int err; - - desc = kmalloc(sizeof(*desc), GFP_ATOMIC); - if (!desc) { - printk(KERN_WARNING - "%s: Can't allocate space for RX descriptor\n", - dev->name); - goto update_stats; - } - - rxfid = hermes_read_regn(hw, RXFID); - - err = hermes_bap_pread(hw, IRQ_BAP, desc, sizeof(*desc), - rxfid, 0); - if (err) { - printk(KERN_ERR "%s: error %d reading Rx descriptor. " - "Frame dropped.\n", dev->name, err); - goto update_stats; - } - - status = le16_to_cpu(desc->status); - - if (status & HERMES_RXSTAT_BADCRC) { - DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", - dev->name); - stats->rx_crc_errors++; - goto update_stats; - } - - /* Handle frames in monitor mode */ - if (priv->iw_mode == IW_MODE_MONITOR) { - orinoco_rx_monitor(dev, rxfid, desc); - goto out; - } - - if (status & HERMES_RXSTAT_UNDECRYPTABLE) { - DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n", - dev->name); - wstats->discard.code++; - goto update_stats; - } - - length = le16_to_cpu(desc->data_len); - - /* Sanity checks */ - if (length < 3) { /* No for even an 802.2 LLC header */ - /* At least on Symbol firmware with PCF we get quite a - lot of these legitimately - Poll frames with no - data. */ - goto out; - } - if (length > IEEE80211_MAX_DATA_LEN) { - printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", - dev->name, length); - stats->rx_length_errors++; - goto update_stats; - } - - /* Payload size does not include Michael MIC. Increase payload - * size to read it together with the data. */ - if (status & HERMES_RXSTAT_MIC) - length += MICHAEL_MIC_LEN; - - /* We need space for the packet data itself, plus an ethernet - header, plus 2 bytes so we can align the IP header on a - 32bit boundary, plus 1 byte so we can read in odd length - packets from the card, which has an IO granularity of 16 - bits */ - skb = dev_alloc_skb(length+ETH_HLEN+2+1); - if (!skb) { - printk(KERN_WARNING "%s: Can't allocate skb for Rx\n", - dev->name); - goto update_stats; - } - - /* We'll prepend the header, so reserve space for it. The worst - case is no decapsulation, when 802.3 header is prepended and - nothing is removed. 2 is for aligning the IP header. */ - skb_reserve(skb, ETH_HLEN + 2); - - err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length), - ALIGN(length, 2), rxfid, - HERMES_802_2_OFFSET); - if (err) { - printk(KERN_ERR "%s: error %d reading frame. " - "Frame dropped.\n", dev->name, err); - goto drop; - } - - /* Add desc and skb to rx queue */ - rx_data = kzalloc(sizeof(*rx_data), GFP_ATOMIC); - if (!rx_data) { - printk(KERN_WARNING "%s: Can't allocate RX packet\n", - dev->name); - goto drop; - } - rx_data->desc = desc; - rx_data->skb = skb; - list_add_tail(&rx_data->list, &priv->rx_list); - tasklet_schedule(&priv->rx_tasklet); - - return; - -drop: - dev_kfree_skb_irq(skb); -update_stats: - stats->rx_errors++; - stats->rx_dropped++; -out: - kfree(desc); -} - -static void orinoco_rx(struct net_device *dev, - struct hermes_rx_descriptor *desc, - struct sk_buff *skb) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct net_device_stats *stats = &priv->stats; - u16 status, fc; - int length; - struct ethhdr *hdr; - - status = le16_to_cpu(desc->status); - length = le16_to_cpu(desc->data_len); - fc = le16_to_cpu(desc->frame_ctl); - - /* Calculate and check MIC */ - if (status & HERMES_RXSTAT_MIC) { - int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >> - HERMES_MIC_KEY_ID_SHIFT); - u8 mic[MICHAEL_MIC_LEN]; - u8 *rxmic; - u8 *src = (fc & IEEE80211_FCTL_FROMDS) ? - desc->addr3 : desc->addr2; - - /* Extract Michael MIC from payload */ - rxmic = skb->data + skb->len - MICHAEL_MIC_LEN; - - skb_trim(skb, skb->len - MICHAEL_MIC_LEN); - length -= MICHAEL_MIC_LEN; - - michael_mic(priv->rx_tfm_mic, - priv->tkip_key[key_id].rx_mic, - desc->addr1, - src, - 0, /* priority or QoS? */ - skb->data, - skb->len, - &mic[0]); - - if (memcmp(mic, rxmic, - MICHAEL_MIC_LEN)) { - union iwreq_data wrqu; - struct iw_michaelmicfailure wxmic; - - printk(KERN_WARNING "%s: " - "Invalid Michael MIC in data frame from %pM, " - "using key %i\n", - dev->name, src, key_id); - - /* TODO: update stats */ - - /* Notify userspace */ - memset(&wxmic, 0, sizeof(wxmic)); - wxmic.flags = key_id & IW_MICFAILURE_KEY_ID; - wxmic.flags |= (desc->addr1[0] & 1) ? - IW_MICFAILURE_GROUP : IW_MICFAILURE_PAIRWISE; - wxmic.src_addr.sa_family = ARPHRD_ETHER; - memcpy(wxmic.src_addr.sa_data, src, ETH_ALEN); - - (void) orinoco_hw_get_tkip_iv(priv, key_id, - &wxmic.tsc[0]); - - memset(&wrqu, 0, sizeof(wrqu)); - wrqu.data.length = sizeof(wxmic); - wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu, - (char *) &wxmic); - - goto drop; - } - } - - /* Handle decapsulation - * In most cases, the firmware tell us about SNAP frames. - * For some reason, the SNAP frames sent by LinkSys APs - * are not properly recognised by most firmwares. - * So, check ourselves */ - if (length >= ENCAPS_OVERHEAD && - (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) || - ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) || - is_ethersnap(skb->data))) { - /* These indicate a SNAP within 802.2 LLC within - 802.11 frame which we'll need to de-encapsulate to - the original EthernetII frame. */ - hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD); - } else { - /* 802.3 frame - prepend 802.3 header as is */ - hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN); - hdr->h_proto = htons(length); - } - memcpy(hdr->h_dest, desc->addr1, ETH_ALEN); - if (fc & IEEE80211_FCTL_FROMDS) - memcpy(hdr->h_source, desc->addr3, ETH_ALEN); - else - memcpy(hdr->h_source, desc->addr2, ETH_ALEN); - - skb->protocol = eth_type_trans(skb, dev); - skb->ip_summed = CHECKSUM_NONE; - if (fc & IEEE80211_FCTL_TODS) - skb->pkt_type = PACKET_OTHERHOST; - - /* Process the wireless stats if needed */ - orinoco_stat_gather(dev, skb, desc); - - /* Pass the packet to the networking stack */ - netif_rx(skb); - stats->rx_packets++; - stats->rx_bytes += length; - - return; - - drop: - dev_kfree_skb(skb); - stats->rx_errors++; - stats->rx_dropped++; -} - -static void orinoco_rx_isr_tasklet(unsigned long data) -{ - struct net_device *dev = (struct net_device *) data; - struct orinoco_private *priv = netdev_priv(dev); - struct orinoco_rx_data *rx_data, *temp; - struct hermes_rx_descriptor *desc; - struct sk_buff *skb; - unsigned long flags; - - /* orinoco_rx requires the driver lock, and we also need to - * protect priv->rx_list, so just hold the lock over the - * lot. - * - * If orinoco_lock fails, we've unplugged the card. In this - * case just abort. */ - if (orinoco_lock(priv, &flags) != 0) - return; - - /* extract desc and skb from queue */ - list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) { - desc = rx_data->desc; - skb = rx_data->skb; - list_del(&rx_data->list); - kfree(rx_data); - - orinoco_rx(dev, desc, skb); - - kfree(desc); - } - - orinoco_unlock(priv, &flags); -} - -/********************************************************************/ -/* Rx path (info frames) */ -/********************************************************************/ - -static void print_linkstatus(struct net_device *dev, u16 status) -{ - char * s; - - if (suppress_linkstatus) - return; - - switch (status) { - case HERMES_LINKSTATUS_NOT_CONNECTED: - s = "Not Connected"; - break; - case HERMES_LINKSTATUS_CONNECTED: - s = "Connected"; - break; - case HERMES_LINKSTATUS_DISCONNECTED: - s = "Disconnected"; - break; - case HERMES_LINKSTATUS_AP_CHANGE: - s = "AP Changed"; - break; - case HERMES_LINKSTATUS_AP_OUT_OF_RANGE: - s = "AP Out of Range"; - break; - case HERMES_LINKSTATUS_AP_IN_RANGE: - s = "AP In Range"; - break; - case HERMES_LINKSTATUS_ASSOC_FAILED: - s = "Association Failed"; - break; - default: - s = "UNKNOWN"; - } - - printk(KERN_DEBUG "%s: New link status: %s (%04x)\n", - dev->name, s, status); -} - -/* Search scan results for requested BSSID, join it if found */ -static void orinoco_join_ap(struct work_struct *work) -{ - struct orinoco_private *priv = - container_of(work, struct orinoco_private, join_work); - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - int err; - unsigned long flags; - struct join_req { - u8 bssid[ETH_ALEN]; - __le16 channel; - } __attribute__ ((packed)) req; - const int atom_len = offsetof(struct prism2_scan_apinfo, atim); - struct prism2_scan_apinfo *atom = NULL; - int offset = 4; - int found = 0; - u8 *buf; - u16 len; - - /* Allocate buffer for scan results */ - buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL); - if (! buf) - return; - - if (orinoco_lock(priv, &flags) != 0) - goto fail_lock; - - /* Sanity checks in case user changed something in the meantime */ - if (! priv->bssid_fixed) - goto out; - - if (strlen(priv->desired_essid) == 0) - goto out; - - /* Read scan results from the firmware */ - err = hermes_read_ltv(hw, USER_BAP, - HERMES_RID_SCANRESULTSTABLE, - MAX_SCAN_LEN, &len, buf); - if (err) { - printk(KERN_ERR "%s: Cannot read scan results\n", - dev->name); - goto out; - } - - len = HERMES_RECLEN_TO_BYTES(len); - - /* Go through the scan results looking for the channel of the AP - * we were requested to join */ - for (; offset + atom_len <= len; offset += atom_len) { - atom = (struct prism2_scan_apinfo *) (buf + offset); - if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) { - found = 1; - break; - } - } - - if (! found) { - DEBUG(1, "%s: Requested AP not found in scan results\n", - dev->name); - goto out; - } - - memcpy(req.bssid, priv->desired_bssid, ETH_ALEN); - req.channel = atom->channel; /* both are little-endian */ - err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST, - &req); - if (err) - printk(KERN_ERR "%s: Error issuing join request\n", dev->name); - - out: - orinoco_unlock(priv, &flags); - - fail_lock: - kfree(buf); -} - -/* Send new BSSID to userspace */ -static void orinoco_send_bssid_wevent(struct orinoco_private *priv) -{ - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - union iwreq_data wrqu; - int err; - - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, - ETH_ALEN, NULL, wrqu.ap_addr.sa_data); - if (err != 0) - return; - - wrqu.ap_addr.sa_family = ARPHRD_ETHER; - - /* Send event to user space */ - wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); -} - -static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv) -{ - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - union iwreq_data wrqu; - int err; - u8 buf[88]; - u8 *ie; - - if (!priv->has_wpa) - return; - - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO, - sizeof(buf), NULL, &buf); - if (err != 0) - return; - - ie = orinoco_get_wpa_ie(buf, sizeof(buf)); - if (ie) { - int rem = sizeof(buf) - (ie - &buf[0]); - wrqu.data.length = ie[1] + 2; - if (wrqu.data.length > rem) - wrqu.data.length = rem; - - if (wrqu.data.length) - /* Send event to user space */ - wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, ie); - } -} - -static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv) -{ - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - union iwreq_data wrqu; - int err; - u8 buf[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */ - u8 *ie; - - if (!priv->has_wpa) - return; - - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_RESP_INFO, - sizeof(buf), NULL, &buf); - if (err != 0) - return; - - ie = orinoco_get_wpa_ie(buf, sizeof(buf)); - if (ie) { - int rem = sizeof(buf) - (ie - &buf[0]); - wrqu.data.length = ie[1] + 2; - if (wrqu.data.length > rem) - wrqu.data.length = rem; - - if (wrqu.data.length) - /* Send event to user space */ - wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, ie); - } -} - -static void orinoco_send_wevents(struct work_struct *work) -{ - struct orinoco_private *priv = - container_of(work, struct orinoco_private, wevent_work); - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return; - - orinoco_send_assocreqie_wevent(priv); - orinoco_send_assocrespie_wevent(priv); - orinoco_send_bssid_wevent(priv); - - orinoco_unlock(priv, &flags); -} - -static inline void orinoco_clear_scan_results(struct orinoco_private *priv, - unsigned long scan_age) -{ - if (priv->has_ext_scan) { - struct xbss_element *bss; - struct xbss_element *tmp_bss; - - /* Blow away current list of scan results */ - list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) { - if (!scan_age || - time_after(jiffies, bss->last_scanned + scan_age)) { - list_move_tail(&bss->list, - &priv->bss_free_list); - /* Don't blow away ->list, just BSS data */ - memset(&bss->bss, 0, sizeof(bss->bss)); - bss->last_scanned = 0; - } - } - } else { - struct bss_element *bss; - struct bss_element *tmp_bss; - - /* Blow away current list of scan results */ - list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) { - if (!scan_age || - time_after(jiffies, bss->last_scanned + scan_age)) { - list_move_tail(&bss->list, - &priv->bss_free_list); - /* Don't blow away ->list, just BSS data */ - memset(&bss->bss, 0, sizeof(bss->bss)); - bss->last_scanned = 0; - } - } - } -} - -static void orinoco_add_ext_scan_result(struct orinoco_private *priv, - struct agere_ext_scan_info *atom) -{ - struct xbss_element *bss = NULL; - int found = 0; - - /* Try to update an existing bss first */ - list_for_each_entry(bss, &priv->bss_list, list) { - if (compare_ether_addr(bss->bss.bssid, atom->bssid)) - continue; - /* ESSID lengths */ - if (bss->bss.data[1] != atom->data[1]) - continue; - if (memcmp(&bss->bss.data[2], &atom->data[2], - atom->data[1])) - continue; - found = 1; - break; - } - - /* Grab a bss off the free list */ - if (!found && !list_empty(&priv->bss_free_list)) { - bss = list_entry(priv->bss_free_list.next, - struct xbss_element, list); - list_del(priv->bss_free_list.next); - - list_add_tail(&bss->list, &priv->bss_list); - } - - if (bss) { - /* Always update the BSS to get latest beacon info */ - memcpy(&bss->bss, atom, sizeof(bss->bss)); - bss->last_scanned = jiffies; - } -} - -static int orinoco_process_scan_results(struct net_device *dev, - unsigned char *buf, - int len) -{ - struct orinoco_private *priv = netdev_priv(dev); - int offset; /* In the scan data */ - union hermes_scan_info *atom; - int atom_len; - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - atom_len = sizeof(struct agere_scan_apinfo); - offset = 0; - break; - case FIRMWARE_TYPE_SYMBOL: - /* Lack of documentation necessitates this hack. - * Different firmwares have 68 or 76 byte long atoms. - * We try modulo first. If the length divides by both, - * we check what would be the channel in the second - * frame for a 68-byte atom. 76-byte atoms have 0 there. - * Valid channel cannot be 0. */ - if (len % 76) - atom_len = 68; - else if (len % 68) - atom_len = 76; - else if (len >= 1292 && buf[68] == 0) - atom_len = 76; - else - atom_len = 68; - offset = 0; - break; - case FIRMWARE_TYPE_INTERSIL: - offset = 4; - if (priv->has_hostscan) { - atom_len = le16_to_cpup((__le16 *)buf); - /* Sanity check for atom_len */ - if (atom_len < sizeof(struct prism2_scan_apinfo)) { - printk(KERN_ERR "%s: Invalid atom_len in scan " - "data: %d\n", dev->name, atom_len); - return -EIO; - } - } else - atom_len = offsetof(struct prism2_scan_apinfo, atim); - break; - default: - return -EOPNOTSUPP; - } - - /* Check that we got an whole number of atoms */ - if ((len - offset) % atom_len) { - printk(KERN_ERR "%s: Unexpected scan data length %d, " - "atom_len %d, offset %d\n", dev->name, len, - atom_len, offset); - return -EIO; - } - - orinoco_clear_scan_results(priv, msecs_to_jiffies(15000)); - - /* Read the entries one by one */ - for (; offset + atom_len <= len; offset += atom_len) { - int found = 0; - struct bss_element *bss = NULL; - - /* Get next atom */ - atom = (union hermes_scan_info *) (buf + offset); - - /* Try to update an existing bss first */ - list_for_each_entry(bss, &priv->bss_list, list) { - if (compare_ether_addr(bss->bss.a.bssid, atom->a.bssid)) - continue; - if (le16_to_cpu(bss->bss.a.essid_len) != - le16_to_cpu(atom->a.essid_len)) - continue; - if (memcmp(bss->bss.a.essid, atom->a.essid, - le16_to_cpu(atom->a.essid_len))) - continue; - found = 1; - break; - } - - /* Grab a bss off the free list */ - if (!found && !list_empty(&priv->bss_free_list)) { - bss = list_entry(priv->bss_free_list.next, - struct bss_element, list); - list_del(priv->bss_free_list.next); - - list_add_tail(&bss->list, &priv->bss_list); - } - - if (bss) { - /* Always update the BSS to get latest beacon info */ - memcpy(&bss->bss, atom, sizeof(bss->bss)); - bss->last_scanned = jiffies; - } - } - - return 0; -} - -static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) -{ - struct orinoco_private *priv = netdev_priv(dev); - u16 infofid; - struct { - __le16 len; - __le16 type; - } __attribute__ ((packed)) info; - int len, type; - int err; - - /* This is an answer to an INQUIRE command that we did earlier, - * or an information "event" generated by the card - * The controller return to us a pseudo frame containing - * the information in question - Jean II */ - infofid = hermes_read_regn(hw, INFOFID); - - /* Read the info frame header - don't try too hard */ - err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info), - infofid, 0); - if (err) { - printk(KERN_ERR "%s: error %d reading info frame. " - "Frame dropped.\n", dev->name, err); - return; - } - - len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len)); - type = le16_to_cpu(info.type); - - switch (type) { - case HERMES_INQ_TALLIES: { - struct hermes_tallies_frame tallies; - struct iw_statistics *wstats = &priv->wstats; - - if (len > sizeof(tallies)) { - printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n", - dev->name, len); - len = sizeof(tallies); - } - - err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len, - infofid, sizeof(info)); - if (err) - break; - - /* Increment our various counters */ - /* wstats->discard.nwid - no wrong BSSID stuff */ - wstats->discard.code += - le16_to_cpu(tallies.RxWEPUndecryptable); - if (len == sizeof(tallies)) - wstats->discard.code += - le16_to_cpu(tallies.RxDiscards_WEPICVError) + - le16_to_cpu(tallies.RxDiscards_WEPExcluded); - wstats->discard.misc += - le16_to_cpu(tallies.TxDiscardsWrongSA); - wstats->discard.fragment += - le16_to_cpu(tallies.RxMsgInBadMsgFragments); - wstats->discard.retries += - le16_to_cpu(tallies.TxRetryLimitExceeded); - /* wstats->miss.beacon - no match */ - } - break; - case HERMES_INQ_LINKSTATUS: { - struct hermes_linkstatus linkstatus; - u16 newstatus; - int connected; - - if (priv->iw_mode == IW_MODE_MONITOR) - break; - - if (len != sizeof(linkstatus)) { - printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n", - dev->name, len); - break; - } - - err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len, - infofid, sizeof(info)); - if (err) - break; - newstatus = le16_to_cpu(linkstatus.linkstatus); - - /* Symbol firmware uses "out of range" to signal that - * the hostscan frame can be requested. */ - if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE && - priv->firmware_type == FIRMWARE_TYPE_SYMBOL && - priv->has_hostscan && priv->scan_inprogress) { - hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL); - break; - } - - connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) - || (newstatus == HERMES_LINKSTATUS_AP_CHANGE) - || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE); - - if (connected) - netif_carrier_on(dev); - else if (!ignore_disconnect) - netif_carrier_off(dev); - - if (newstatus != priv->last_linkstatus) { - priv->last_linkstatus = newstatus; - print_linkstatus(dev, newstatus); - /* The info frame contains only one word which is the - * status (see hermes.h). The status is pretty boring - * in itself, that's why we export the new BSSID... - * Jean II */ - schedule_work(&priv->wevent_work); - } - } - break; - case HERMES_INQ_SCAN: - if (!priv->scan_inprogress && priv->bssid_fixed && - priv->firmware_type == FIRMWARE_TYPE_INTERSIL) { - schedule_work(&priv->join_work); - break; - } - /* fall through */ - case HERMES_INQ_HOSTSCAN: - case HERMES_INQ_HOSTSCAN_SYMBOL: { - /* Result of a scanning. Contains information about - * cells in the vicinity - Jean II */ - union iwreq_data wrqu; - unsigned char *buf; - - /* Scan is no longer in progress */ - priv->scan_inprogress = 0; - - /* Sanity check */ - if (len > 4096) { - printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n", - dev->name, len); - break; - } - - /* Allocate buffer for results */ - buf = kmalloc(len, GFP_ATOMIC); - if (buf == NULL) - /* No memory, so can't printk()... */ - break; - - /* Read scan data */ - err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len, - infofid, sizeof(info)); - if (err) { - kfree(buf); - break; - } - -#ifdef ORINOCO_DEBUG - { - int i; - printk(KERN_DEBUG "Scan result [%02X", buf[0]); - for(i = 1; i < (len * 2); i++) - printk(":%02X", buf[i]); - printk("]\n"); - } -#endif /* ORINOCO_DEBUG */ - - if (orinoco_process_scan_results(dev, buf, len) == 0) { - /* Send an empty event to user space. - * We don't send the received data on the event because - * it would require us to do complex transcoding, and - * we want to minimise the work done in the irq handler - * Use a request to extract the data - Jean II */ - wrqu.data.length = 0; - wrqu.data.flags = 0; - wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL); - } - kfree(buf); - } - break; - case HERMES_INQ_CHANNELINFO: - { - struct agere_ext_scan_info *bss; - - if (!priv->scan_inprogress) { - printk(KERN_DEBUG "%s: Got chaninfo without scan, " - "len=%d\n", dev->name, len); - break; - } - - /* An empty result indicates that the scan is complete */ - if (len == 0) { - union iwreq_data wrqu; - - /* Scan is no longer in progress */ - priv->scan_inprogress = 0; - - wrqu.data.length = 0; - wrqu.data.flags = 0; - wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL); - break; - } - - /* Sanity check */ - else if (len > sizeof(*bss)) { - printk(KERN_WARNING - "%s: Ext scan results too large (%d bytes). " - "Truncating results to %zd bytes.\n", - dev->name, len, sizeof(*bss)); - len = sizeof(*bss); - } else if (len < (offsetof(struct agere_ext_scan_info, - data) + 2)) { - /* Drop this result now so we don't have to - * keep checking later */ - printk(KERN_WARNING - "%s: Ext scan results too short (%d bytes)\n", - dev->name, len); - break; - } - - bss = kmalloc(sizeof(*bss), GFP_ATOMIC); - if (bss == NULL) - break; - - /* Read scan data */ - err = hermes_bap_pread(hw, IRQ_BAP, (void *) bss, len, - infofid, sizeof(info)); - if (err) { - kfree(bss); - break; - } - - orinoco_add_ext_scan_result(priv, bss); - - kfree(bss); - break; - } - case HERMES_INQ_SEC_STAT_AGERE: - /* Security status (Agere specific) */ - /* Ignore this frame for now */ - if (priv->firmware_type == FIRMWARE_TYPE_AGERE) - break; - /* fall through */ - default: - printk(KERN_DEBUG "%s: Unknown information frame received: " - "type 0x%04x, length %d\n", dev->name, type, len); - /* We don't actually do anything about it */ - break; - } -} - -static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw) -{ - if (net_ratelimit()) - printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name); -} - -/********************************************************************/ -/* Internal hardware control routines */ -/********************************************************************/ - -int __orinoco_up(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct hermes *hw = &priv->hw; - int err; - - netif_carrier_off(dev); /* just to make sure */ - - err = __orinoco_program_rids(dev); - if (err) { - printk(KERN_ERR "%s: Error %d configuring card\n", - dev->name, err); - return err; - } - - /* Fire things up again */ - hermes_set_irqmask(hw, ORINOCO_INTEN); - err = hermes_enable_port(hw, 0); - if (err) { - printk(KERN_ERR "%s: Error %d enabling MAC port\n", - dev->name, err); - return err; - } - - netif_start_queue(dev); - - return 0; -} - -int __orinoco_down(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct hermes *hw = &priv->hw; - int err; - - netif_stop_queue(dev); - - if (! priv->hw_unavailable) { - if (! priv->broken_disableport) { - err = hermes_disable_port(hw, 0); - if (err) { - /* Some firmwares (e.g. Intersil 1.3.x) seem - * to have problems disabling the port, oh - * well, too bad. */ - printk(KERN_WARNING "%s: Error %d disabling MAC port\n", - dev->name, err); - priv->broken_disableport = 1; - } - } - hermes_set_irqmask(hw, 0); - hermes_write_regn(hw, EVACK, 0xffff); - } - - /* firmware will have to reassociate */ - netif_carrier_off(dev); - priv->last_linkstatus = 0xffff; - - return 0; -} - -static int orinoco_allocate_fid(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct hermes *hw = &priv->hw; - int err; - - err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); - if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) { - /* Try workaround for old Symbol firmware bug */ - printk(KERN_WARNING "%s: firmware ALLOC bug detected " - "(old Symbol firmware?). Trying to work around... ", - dev->name); - - priv->nicbuf_size = TX_NICBUF_SIZE_BUG; - err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); - if (err) - printk("failed!\n"); - else - printk("ok.\n"); - } - - return err; -} - -int orinoco_reinit_firmware(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct hermes *hw = &priv->hw; - int err; - - err = hermes_init(hw); - if (priv->do_fw_download && !err) { - err = orinoco_download(priv); - if (err) - priv->do_fw_download = 0; - } - if (!err) - err = orinoco_allocate_fid(dev); - - return err; -} - -static int __orinoco_hw_set_bitrate(struct orinoco_private *priv) -{ - hermes_t *hw = &priv->hw; - int err = 0; - - if (priv->bitratemode >= BITRATE_TABLE_SIZE) { - printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n", - priv->ndev->name, priv->bitratemode); - return -EINVAL; - } - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFTXRATECONTROL, - bitrate_table[priv->bitratemode].agere_txratectrl); - break; - case FIRMWARE_TYPE_INTERSIL: - case FIRMWARE_TYPE_SYMBOL: - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFTXRATECONTROL, - bitrate_table[priv->bitratemode].intersil_txratectrl); - break; - default: - BUG(); - } - - return err; -} - -/* Set fixed AP address */ -static int __orinoco_hw_set_wap(struct orinoco_private *priv) -{ - int roaming_flag; - int err = 0; - hermes_t *hw = &priv->hw; - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - /* not supported */ - break; - case FIRMWARE_TYPE_INTERSIL: - if (priv->bssid_fixed) - roaming_flag = 2; - else - roaming_flag = 1; - - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFROAMINGMODE, - roaming_flag); - break; - case FIRMWARE_TYPE_SYMBOL: - err = HERMES_WRITE_RECORD(hw, USER_BAP, - HERMES_RID_CNFMANDATORYBSSID_SYMBOL, - &priv->desired_bssid); - break; - } - return err; -} - -/* Change the WEP keys and/or the current keys. Can be called - * either from __orinoco_hw_setup_enc() or directly from - * orinoco_ioctl_setiwencode(). In the later case the association - * with the AP is not broken (if the firmware can handle it), - * which is needed for 802.1x implementations. */ -static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) -{ - hermes_t *hw = &priv->hw; - int err = 0; - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - err = HERMES_WRITE_RECORD(hw, USER_BAP, - HERMES_RID_CNFWEPKEYS_AGERE, - &priv->keys); - if (err) - return err; - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFTXKEY_AGERE, - priv->tx_key); - if (err) - return err; - break; - case FIRMWARE_TYPE_INTERSIL: - case FIRMWARE_TYPE_SYMBOL: - { - int keylen; - int i; - - /* Force uniform key length to work around firmware bugs */ - keylen = le16_to_cpu(priv->keys[priv->tx_key].len); - - if (keylen > LARGE_KEY_SIZE) { - printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n", - priv->ndev->name, priv->tx_key, keylen); - return -E2BIG; - } - - /* Write all 4 keys */ - for(i = 0; i < ORINOCO_MAX_KEYS; i++) { - err = hermes_write_ltv(hw, USER_BAP, - HERMES_RID_CNFDEFAULTKEY0 + i, - HERMES_BYTES_TO_RECLEN(keylen), - priv->keys[i].data); - if (err) - return err; - } - - /* Write the index of the key used in transmission */ - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFWEPDEFAULTKEYID, - priv->tx_key); - if (err) - return err; - } - break; - } - - return 0; -} - -static int __orinoco_hw_setup_enc(struct orinoco_private *priv) -{ - hermes_t *hw = &priv->hw; - int err = 0; - int master_wep_flag; - int auth_flag; - int enc_flag; - - /* Setup WEP keys for WEP and WPA */ - if (priv->encode_alg) - __orinoco_hw_setup_wepkeys(priv); - - if (priv->wep_restrict) - auth_flag = HERMES_AUTH_SHARED_KEY; - else - auth_flag = HERMES_AUTH_OPEN; - - if (priv->wpa_enabled) - enc_flag = 2; - else if (priv->encode_alg == IW_ENCODE_ALG_WEP) - enc_flag = 1; - else - enc_flag = 0; - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: /* Agere style WEP */ - if (priv->encode_alg == IW_ENCODE_ALG_WEP) { - /* Enable the shared-key authentication. */ - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFAUTHENTICATION_AGERE, - auth_flag); - } - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFWEPENABLED_AGERE, - enc_flag); - if (err) - return err; - - if (priv->has_wpa) { - /* Set WPA key management */ - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE, - priv->key_mgmt); - if (err) - return err; - } - - break; - - case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */ - case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */ - if (priv->encode_alg == IW_ENCODE_ALG_WEP) { - if (priv->wep_restrict || - (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)) - master_wep_flag = HERMES_WEP_PRIVACY_INVOKED | - HERMES_WEP_EXCL_UNENCRYPTED; - else - master_wep_flag = HERMES_WEP_PRIVACY_INVOKED; - - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFAUTHENTICATION, - auth_flag); - if (err) - return err; - } else - master_wep_flag = 0; - - if (priv->iw_mode == IW_MODE_MONITOR) - master_wep_flag |= HERMES_WEP_HOST_DECRYPT; - - /* Master WEP setting : on/off */ - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFWEPFLAGS_INTERSIL, - master_wep_flag); - if (err) - return err; - - break; - } - - return 0; -} - -/* key must be 32 bytes, including the tx and rx MIC keys. - * rsc must be 8 bytes - * tsc must be 8 bytes or NULL - */ -static int __orinoco_hw_set_tkip_key(hermes_t *hw, int key_idx, int set_tx, - u8 *key, u8 *rsc, u8 *tsc) -{ - struct { - __le16 idx; - u8 rsc[IW_ENCODE_SEQ_MAX_SIZE]; - u8 key[TKIP_KEYLEN]; - u8 tx_mic[MIC_KEYLEN]; - u8 rx_mic[MIC_KEYLEN]; - u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; - } __attribute__ ((packed)) buf; - int ret; - int err; - int k; - u16 xmitting; - - key_idx &= 0x3; - - if (set_tx) - key_idx |= 0x8000; - - buf.idx = cpu_to_le16(key_idx); - memcpy(buf.key, key, - sizeof(buf.key) + sizeof(buf.tx_mic) + sizeof(buf.rx_mic)); - - if (rsc == NULL) - memset(buf.rsc, 0, sizeof(buf.rsc)); - else - memcpy(buf.rsc, rsc, sizeof(buf.rsc)); - - if (tsc == NULL) { - memset(buf.tsc, 0, sizeof(buf.tsc)); - buf.tsc[4] = 0x10; - } else { - memcpy(buf.tsc, tsc, sizeof(buf.tsc)); - } - - /* Wait upto 100ms for tx queue to empty */ - k = 100; - do { - k--; - udelay(1000); - ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY, - &xmitting); - if (ret) - break; - } while ((k > 0) && xmitting); - - if (k == 0) - ret = -ETIMEDOUT; - - err = HERMES_WRITE_RECORD(hw, USER_BAP, - HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE, - &buf); - - return ret ? ret : err; -} - -static int orinoco_clear_tkip_key(struct orinoco_private *priv, - int key_idx) -{ - hermes_t *hw = &priv->hw; - int err; - - memset(&priv->tkip_key[key_idx], 0, sizeof(priv->tkip_key[key_idx])); - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE, - key_idx); - if (err) - printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n", - priv->ndev->name, err, key_idx); - return err; -} - -static int __orinoco_program_rids(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int err; - struct hermes_idstring idbuf; - - /* Set the MAC address */ - err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, - HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr); - if (err) { - printk(KERN_ERR "%s: Error %d setting MAC address\n", - dev->name, err); - return err; - } - - /* Set up the link mode */ - err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE, - priv->port_type); - if (err) { - printk(KERN_ERR "%s: Error %d setting port type\n", - dev->name, err); - return err; - } - /* Set the channel/frequency */ - if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) { - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFOWNCHANNEL, - priv->channel); - if (err) { - printk(KERN_ERR "%s: Error %d setting channel %d\n", - dev->name, err, priv->channel); - return err; - } - } - - if (priv->has_ibss) { - u16 createibss; - - if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) { - printk(KERN_WARNING "%s: This firmware requires an " - "ESSID in IBSS-Ad-Hoc mode.\n", dev->name); - /* With wvlan_cs, in this case, we would crash. - * hopefully, this driver will behave better... - * Jean II */ - createibss = 0; - } else { - createibss = priv->createibss; - } - - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFCREATEIBSS, - createibss); - if (err) { - printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", - dev->name, err); - return err; - } - } - - /* Set the desired BSSID */ - err = __orinoco_hw_set_wap(priv); - if (err) { - printk(KERN_ERR "%s: Error %d setting AP address\n", - dev->name, err); - return err; - } - /* Set the desired ESSID */ - idbuf.len = cpu_to_le16(strlen(priv->desired_essid)); - memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val)); - /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */ - err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID, - HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), - &idbuf); - if (err) { - printk(KERN_ERR "%s: Error %d setting OWNSSID\n", - dev->name, err); - return err; - } - err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID, - HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), - &idbuf); - if (err) { - printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n", - dev->name, err); - return err; - } - - /* Set the station name */ - idbuf.len = cpu_to_le16(strlen(priv->nick)); - memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val)); - err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, - HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2), - &idbuf); - if (err) { - printk(KERN_ERR "%s: Error %d setting nickname\n", - dev->name, err); - return err; - } - - /* Set AP density */ - if (priv->has_sensitivity) { - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFSYSTEMSCALE, - priv->ap_density); - if (err) { - printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. " - "Disabling sensitivity control\n", - dev->name, err); - - priv->has_sensitivity = 0; - } - } - - /* Set RTS threshold */ - err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, - priv->rts_thresh); - if (err) { - printk(KERN_ERR "%s: Error %d setting RTS threshold\n", - dev->name, err); - return err; - } - - /* Set fragmentation threshold or MWO robustness */ - if (priv->has_mwo) - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFMWOROBUST_AGERE, - priv->mwo_robust); - else - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, - priv->frag_thresh); - if (err) { - printk(KERN_ERR "%s: Error %d setting fragmentation\n", - dev->name, err); - return err; - } - - /* Set bitrate */ - err = __orinoco_hw_set_bitrate(priv); - if (err) { - printk(KERN_ERR "%s: Error %d setting bitrate\n", - dev->name, err); - return err; - } - - /* Set power management */ - if (priv->has_pm) { - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFPMENABLED, - priv->pm_on); - if (err) { - printk(KERN_ERR "%s: Error %d setting up PM\n", - dev->name, err); - return err; - } - - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFMULTICASTRECEIVE, - priv->pm_mcast); - if (err) { - printk(KERN_ERR "%s: Error %d setting up PM\n", - dev->name, err); - return err; - } - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFMAXSLEEPDURATION, - priv->pm_period); - if (err) { - printk(KERN_ERR "%s: Error %d setting up PM\n", - dev->name, err); - return err; - } - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFPMHOLDOVERDURATION, - priv->pm_timeout); - if (err) { - printk(KERN_ERR "%s: Error %d setting up PM\n", - dev->name, err); - return err; - } - } - - /* Set preamble - only for Symbol so far... */ - if (priv->has_preamble) { - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFPREAMBLE_SYMBOL, - priv->preamble); - if (err) { - printk(KERN_ERR "%s: Error %d setting preamble\n", - dev->name, err); - return err; - } - } - - /* Set up encryption */ - if (priv->has_wep || priv->has_wpa) { - err = __orinoco_hw_setup_enc(priv); - if (err) { - printk(KERN_ERR "%s: Error %d activating encryption\n", - dev->name, err); - return err; - } - } - - if (priv->iw_mode == IW_MODE_MONITOR) { - /* Enable monitor mode */ - dev->type = ARPHRD_IEEE80211; - err = hermes_docmd_wait(hw, HERMES_CMD_TEST | - HERMES_TEST_MONITOR, 0, NULL); - } else { - /* Disable monitor mode */ - dev->type = ARPHRD_ETHER; - err = hermes_docmd_wait(hw, HERMES_CMD_TEST | - HERMES_TEST_STOP, 0, NULL); - } - if (err) - return err; - - /* Set promiscuity / multicast*/ - priv->promiscuous = 0; - priv->mc_count = 0; - - /* FIXME: what about netif_tx_lock */ - __orinoco_set_multicast_list(dev); - - return 0; -} - -/* FIXME: return int? */ -static void -__orinoco_set_multicast_list(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int err = 0; - int promisc, mc_count; - - /* The Hermes doesn't seem to have an allmulti mode, so we go - * into promiscuous mode and let the upper levels deal. */ - if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) || - (dev->mc_count > MAX_MULTICAST(priv)) ) { - promisc = 1; - mc_count = 0; - } else { - promisc = 0; - mc_count = dev->mc_count; - } - - if (promisc != priv->promiscuous) { - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFPROMISCUOUSMODE, - promisc); - if (err) { - printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n", - dev->name, err); - } else - priv->promiscuous = promisc; - } - - /* If we're not in promiscuous mode, then we need to set the - * group address if either we want to multicast, or if we were - * multicasting and want to stop */ - if (! promisc && (mc_count || priv->mc_count) ) { - struct dev_mc_list *p = dev->mc_list; - struct hermes_multicast mclist; - int i; - - for (i = 0; i < mc_count; i++) { - /* paranoia: is list shorter than mc_count? */ - BUG_ON(! p); - /* paranoia: bad address size in list? */ - BUG_ON(p->dmi_addrlen != ETH_ALEN); - - memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN); - p = p->next; - } - - if (p) - printk(KERN_WARNING "%s: Multicast list is " - "longer than mc_count\n", dev->name); - - err = hermes_write_ltv(hw, USER_BAP, - HERMES_RID_CNFGROUPADDRESSES, - HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN), - &mclist); - if (err) - printk(KERN_ERR "%s: Error %d setting multicast list.\n", - dev->name, err); - else - priv->mc_count = mc_count; - } -} - -/* This must be called from user context, without locks held - use - * schedule_work() */ -static void orinoco_reset(struct work_struct *work) -{ - struct orinoco_private *priv = - container_of(work, struct orinoco_private, reset_work); - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - int err; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - /* When the hardware becomes available again, whatever - * detects that is responsible for re-initializing - * it. So no need for anything further */ - return; - - netif_stop_queue(dev); - - /* Shut off interrupts. Depending on what state the hardware - * is in, this might not work, but we'll try anyway */ - hermes_set_irqmask(hw, 0); - hermes_write_regn(hw, EVACK, 0xffff); - - priv->hw_unavailable++; - priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */ - netif_carrier_off(dev); - - orinoco_unlock(priv, &flags); - - /* Scanning support: Cleanup of driver struct */ - orinoco_clear_scan_results(priv, 0); - priv->scan_inprogress = 0; - - if (priv->hard_reset) { - err = (*priv->hard_reset)(priv); - if (err) { - printk(KERN_ERR "%s: orinoco_reset: Error %d " - "performing hard reset\n", dev->name, err); - goto disable; - } - } - - err = orinoco_reinit_firmware(dev); - if (err) { - printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", - dev->name, err); - goto disable; - } - - spin_lock_irq(&priv->lock); /* This has to be called from user context */ - - priv->hw_unavailable--; - - /* priv->open or priv->hw_unavailable might have changed while - * we dropped the lock */ - if (priv->open && (! priv->hw_unavailable)) { - err = __orinoco_up(dev); - if (err) { - printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n", - dev->name, err); - } else - dev->trans_start = jiffies; - } - - spin_unlock_irq(&priv->lock); - - return; - disable: - hermes_set_irqmask(hw, 0); - netif_device_detach(dev); - printk(KERN_ERR "%s: Device has been disabled!\n", dev->name); -} - -/********************************************************************/ -/* Interrupt handler */ -/********************************************************************/ - -static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw) -{ - printk(KERN_DEBUG "%s: TICK\n", dev->name); -} - -static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw) -{ - /* This seems to happen a fair bit under load, but ignoring it - seems to work fine...*/ - printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n", - dev->name); -} - -irqreturn_t orinoco_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int count = MAX_IRQLOOPS_PER_IRQ; - u16 evstat, events; - /* These are used to detect a runaway interrupt situation */ - /* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy, - * we panic and shut down the hardware */ - static int last_irq_jiffy = 0; /* jiffies value the last time - * we were called */ - static int loops_this_jiffy = 0; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) { - /* If hw is unavailable - we don't know if the irq was - * for us or not */ - return IRQ_HANDLED; - } - - evstat = hermes_read_regn(hw, EVSTAT); - events = evstat & hw->inten; - if (! events) { - orinoco_unlock(priv, &flags); - return IRQ_NONE; - } - - if (jiffies != last_irq_jiffy) - loops_this_jiffy = 0; - last_irq_jiffy = jiffies; - - while (events && count--) { - if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) { - printk(KERN_WARNING "%s: IRQ handler is looping too " - "much! Resetting.\n", dev->name); - /* Disable interrupts for now */ - hermes_set_irqmask(hw, 0); - schedule_work(&priv->reset_work); - break; - } - - /* Check the card hasn't been removed */ - if (! hermes_present(hw)) { - DEBUG(0, "orinoco_interrupt(): card removed\n"); - break; - } - - if (events & HERMES_EV_TICK) - __orinoco_ev_tick(dev, hw); - if (events & HERMES_EV_WTERR) - __orinoco_ev_wterr(dev, hw); - if (events & HERMES_EV_INFDROP) - __orinoco_ev_infdrop(dev, hw); - if (events & HERMES_EV_INFO) - __orinoco_ev_info(dev, hw); - if (events & HERMES_EV_RX) - __orinoco_ev_rx(dev, hw); - if (events & HERMES_EV_TXEXC) - __orinoco_ev_txexc(dev, hw); - if (events & HERMES_EV_TX) - __orinoco_ev_tx(dev, hw); - if (events & HERMES_EV_ALLOC) - __orinoco_ev_alloc(dev, hw); - - hermes_write_regn(hw, EVACK, evstat); - - evstat = hermes_read_regn(hw, EVSTAT); - events = evstat & hw->inten; - }; - - orinoco_unlock(priv, &flags); - return IRQ_HANDLED; -} - -/********************************************************************/ -/* Power management */ -/********************************************************************/ -#if defined(CONFIG_PM_SLEEP) && !defined(CONFIG_HERMES_CACHE_FW_ON_INIT) -static int orinoco_pm_notifier(struct notifier_block *notifier, - unsigned long pm_event, - void *unused) -{ - struct orinoco_private *priv = container_of(notifier, - struct orinoco_private, - pm_notifier); - - /* All we need to do is cache the firmware before suspend, and - * release it when we come out. - * - * Only need to do this if we're downloading firmware. */ - if (!priv->do_fw_download) - return NOTIFY_DONE; - - switch (pm_event) { - case PM_HIBERNATION_PREPARE: - case PM_SUSPEND_PREPARE: - orinoco_cache_fw(priv, 0); - break; - - case PM_POST_RESTORE: - /* Restore from hibernation failed. We need to clean - * up in exactly the same way, so fall through. */ - case PM_POST_HIBERNATION: - case PM_POST_SUSPEND: - orinoco_uncache_fw(priv); - break; - - case PM_RESTORE_PREPARE: - default: - break; - } - - return NOTIFY_DONE; -} - -static void orinoco_register_pm_notifier(struct orinoco_private *priv) -{ - priv->pm_notifier.notifier_call = orinoco_pm_notifier; - register_pm_notifier(&priv->pm_notifier); -} - -static void orinoco_unregister_pm_notifier(struct orinoco_private *priv) -{ - unregister_pm_notifier(&priv->pm_notifier); -} -#else /* !PM_SLEEP || HERMES_CACHE_FW_ON_INIT */ -#define orinoco_register_pm_notifier(priv) do { } while(0) -#define orinoco_unregister_pm_notifier(priv) do { } while(0) -#endif - -/********************************************************************/ -/* Initialization */ -/********************************************************************/ - -struct comp_id { - u16 id, variant, major, minor; -} __attribute__ ((packed)); - -static inline fwtype_t determine_firmware_type(struct comp_id *nic_id) -{ - if (nic_id->id < 0x8000) - return FIRMWARE_TYPE_AGERE; - else if (nic_id->id == 0x8000 && nic_id->major == 0) - return FIRMWARE_TYPE_SYMBOL; - else - return FIRMWARE_TYPE_INTERSIL; -} - -/* Set priv->firmware type, determine firmware properties */ -static int determine_firmware(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int err; - struct comp_id nic_id, sta_id; - unsigned int firmver; - char tmp[SYMBOL_MAX_VER_LEN+1] __attribute__((aligned(2))); - - /* Get the hardware version */ - err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id); - if (err) { - printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n", - dev->name, err); - return err; - } - - le16_to_cpus(&nic_id.id); - le16_to_cpus(&nic_id.variant); - le16_to_cpus(&nic_id.major); - le16_to_cpus(&nic_id.minor); - printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n", - dev->name, nic_id.id, nic_id.variant, - nic_id.major, nic_id.minor); - - priv->firmware_type = determine_firmware_type(&nic_id); - - /* Get the firmware version */ - err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id); - if (err) { - printk(KERN_ERR "%s: Cannot read station identity: error %d\n", - dev->name, err); - return err; - } - - le16_to_cpus(&sta_id.id); - le16_to_cpus(&sta_id.variant); - le16_to_cpus(&sta_id.major); - le16_to_cpus(&sta_id.minor); - printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n", - dev->name, sta_id.id, sta_id.variant, - sta_id.major, sta_id.minor); - - switch (sta_id.id) { - case 0x15: - printk(KERN_ERR "%s: Primary firmware is active\n", - dev->name); - return -ENODEV; - case 0x14b: - printk(KERN_ERR "%s: Tertiary firmware is active\n", - dev->name); - return -ENODEV; - case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */ - case 0x21: /* Symbol Spectrum24 Trilogy */ - break; - default: - printk(KERN_NOTICE "%s: Unknown station ID, please report\n", - dev->name); - break; - } - - /* Default capabilities */ - priv->has_sensitivity = 1; - priv->has_mwo = 0; - priv->has_preamble = 0; - priv->has_port3 = 1; - priv->has_ibss = 1; - priv->has_wep = 0; - priv->has_big_wep = 0; - priv->has_alt_txcntl = 0; - priv->has_ext_scan = 0; - priv->has_wpa = 0; - priv->do_fw_download = 0; - - /* Determine capabilities from the firmware version */ - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout, - ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */ - snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, - "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor); - - firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor; - - priv->has_ibss = (firmver >= 0x60006); - priv->has_wep = (firmver >= 0x40020); - priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell - Gold cards from the others? */ - priv->has_mwo = (firmver >= 0x60000); - priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ - priv->ibss_port = 1; - priv->has_hostscan = (firmver >= 0x8000a); - priv->do_fw_download = 1; - priv->broken_monitor = (firmver >= 0x80000); - priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */ - priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */ - priv->has_wpa = (firmver >= 0x9002a); - /* Tested with Agere firmware : - * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II - * Tested CableTron firmware : 4.32 => Anton */ - break; - case FIRMWARE_TYPE_SYMBOL: - /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */ - /* Intel MAC : 00:02:B3:* */ - /* 3Com MAC : 00:50:DA:* */ - memset(tmp, 0, sizeof(tmp)); - /* Get the Symbol firmware version */ - err = hermes_read_ltv(hw, USER_BAP, - HERMES_RID_SECONDARYVERSION_SYMBOL, - SYMBOL_MAX_VER_LEN, NULL, &tmp); - if (err) { - printk(KERN_WARNING - "%s: Error %d reading Symbol firmware info. Wildly guessing capabilities...\n", - dev->name, err); - firmver = 0; - tmp[0] = '\0'; - } else { - /* The firmware revision is a string, the format is - * something like : "V2.20-01". - * Quick and dirty parsing... - Jean II - */ - firmver = ((tmp[1] - '0') << 16) | ((tmp[3] - '0') << 12) - | ((tmp[4] - '0') << 8) | ((tmp[6] - '0') << 4) - | (tmp[7] - '0'); - - tmp[SYMBOL_MAX_VER_LEN] = '\0'; - } - - snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, - "Symbol %s", tmp); - - priv->has_ibss = (firmver >= 0x20000); - priv->has_wep = (firmver >= 0x15012); - priv->has_big_wep = (firmver >= 0x20000); - priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) || - (firmver >= 0x29000 && firmver < 0x30000) || - firmver >= 0x31000; - priv->has_preamble = (firmver >= 0x20000); - priv->ibss_port = 4; - - /* Symbol firmware is found on various cards, but - * there has been no attempt to check firmware - * download on non-spectrum_cs based cards. - * - * Given that the Agere firmware download works - * differently, we should avoid doing a firmware - * download with the Symbol algorithm on non-spectrum - * cards. - * - * For now we can identify a spectrum_cs based card - * because it has a firmware reset function. - */ - priv->do_fw_download = (priv->stop_fw != NULL); - - priv->broken_disableport = (firmver == 0x25013) || - (firmver >= 0x30000 && firmver <= 0x31000); - priv->has_hostscan = (firmver >= 0x31001) || - (firmver >= 0x29057 && firmver < 0x30000); - /* Tested with Intel firmware : 0x20015 => Jean II */ - /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ - break; - case FIRMWARE_TYPE_INTERSIL: - /* D-Link, Linksys, Adtron, ZoomAir, and many others... - * Samsung, Compaq 100/200 and Proxim are slightly - * different and less well tested */ - /* D-Link MAC : 00:40:05:* */ - /* Addtron MAC : 00:90:D1:* */ - snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, - "Intersil %d.%d.%d", sta_id.major, sta_id.minor, - sta_id.variant); - - firmver = ((unsigned long)sta_id.major << 16) | - ((unsigned long)sta_id.minor << 8) | sta_id.variant; - - priv->has_ibss = (firmver >= 0x000700); /* FIXME */ - priv->has_big_wep = priv->has_wep = (firmver >= 0x000800); - priv->has_pm = (firmver >= 0x000700); - priv->has_hostscan = (firmver >= 0x010301); - - if (firmver >= 0x000800) - priv->ibss_port = 0; - else { - printk(KERN_NOTICE "%s: Intersil firmware earlier " - "than v0.8.x - several features not supported\n", - dev->name); - priv->ibss_port = 1; - } - break; - } - printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name, - priv->fw_name); - - return 0; -} - -static int orinoco_init(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int err = 0; - struct hermes_idstring nickbuf; - u16 reclen; - int len; - - /* No need to lock, the hw_unavailable flag is already set in - * alloc_orinocodev() */ - priv->nicbuf_size = IEEE80211_MAX_FRAME_LEN + ETH_HLEN; - - /* Initialize the firmware */ - err = hermes_init(hw); - if (err != 0) { - printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n", - dev->name, err); - goto out; - } - - err = determine_firmware(dev); - if (err != 0) { - printk(KERN_ERR "%s: Incompatible firmware, aborting\n", - dev->name); - goto out; - } - - if (priv->do_fw_download) { -#ifdef CONFIG_HERMES_CACHE_FW_ON_INIT - orinoco_cache_fw(priv, 0); -#endif - - err = orinoco_download(priv); - if (err) - priv->do_fw_download = 0; - - /* Check firmware version again */ - err = determine_firmware(dev); - if (err != 0) { - printk(KERN_ERR "%s: Incompatible firmware, aborting\n", - dev->name); - goto out; - } - } - - if (priv->has_port3) - printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name); - if (priv->has_ibss) - printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n", - dev->name); - if (priv->has_wep) { - printk(KERN_DEBUG "%s: WEP supported, ", dev->name); - if (priv->has_big_wep) - printk("104-bit key\n"); - else - printk("40-bit key\n"); - } - if (priv->has_wpa) { - printk(KERN_DEBUG "%s: WPA-PSK supported\n", dev->name); - if (orinoco_mic_init(priv)) { - printk(KERN_ERR "%s: Failed to setup MIC crypto " - "algorithm. Disabling WPA support\n", dev->name); - priv->has_wpa = 0; - } - } - - /* Now we have the firmware capabilities, allocate appropiate - * sized scan buffers */ - if (orinoco_bss_data_allocate(priv)) - goto out; - orinoco_bss_data_init(priv); - - /* Get the MAC address */ - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, - ETH_ALEN, NULL, dev->dev_addr); - if (err) { - printk(KERN_WARNING "%s: failed to read MAC address!\n", - dev->name); - goto out; - } - - printk(KERN_DEBUG "%s: MAC address %pM\n", - dev->name, dev->dev_addr); - - /* Get the station name */ - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, - sizeof(nickbuf), &reclen, &nickbuf); - if (err) { - printk(KERN_ERR "%s: failed to read station name\n", - dev->name); - goto out; - } - if (nickbuf.len) - len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len)); - else - len = min(IW_ESSID_MAX_SIZE, 2 * reclen); - memcpy(priv->nick, &nickbuf.val, len); - priv->nick[len] = '\0'; - - printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick); - - err = orinoco_allocate_fid(dev); - if (err) { - printk(KERN_ERR "%s: failed to allocate NIC buffer!\n", - dev->name); - goto out; - } - - /* Get allowed channels */ - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST, - &priv->channel_mask); - if (err) { - printk(KERN_ERR "%s: failed to read channel list!\n", - dev->name); - goto out; - } - - /* Get initial AP density */ - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE, - &priv->ap_density); - if (err || priv->ap_density < 1 || priv->ap_density > 3) { - priv->has_sensitivity = 0; - } - - /* Get initial RTS threshold */ - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, - &priv->rts_thresh); - if (err) { - printk(KERN_ERR "%s: failed to read RTS threshold!\n", - dev->name); - goto out; - } - - /* Get initial fragmentation settings */ - if (priv->has_mwo) - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFMWOROBUST_AGERE, - &priv->mwo_robust); - else - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, - &priv->frag_thresh); - if (err) { - printk(KERN_ERR "%s: failed to read fragmentation settings!\n", - dev->name); - goto out; - } - - /* Power management setup */ - if (priv->has_pm) { - priv->pm_on = 0; - priv->pm_mcast = 1; - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFMAXSLEEPDURATION, - &priv->pm_period); - if (err) { - printk(KERN_ERR "%s: failed to read power management period!\n", - dev->name); - goto out; - } - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFPMHOLDOVERDURATION, - &priv->pm_timeout); - if (err) { - printk(KERN_ERR "%s: failed to read power management timeout!\n", - dev->name); - goto out; - } - } - - /* Preamble setup */ - if (priv->has_preamble) { - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFPREAMBLE_SYMBOL, - &priv->preamble); - if (err) - goto out; - } - - /* Set up the default configuration */ - priv->iw_mode = IW_MODE_INFRA; - /* By default use IEEE/IBSS ad-hoc mode if we have it */ - priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss); - set_port_type(priv); - priv->channel = 0; /* use firmware default */ - - priv->promiscuous = 0; - priv->encode_alg = IW_ENCODE_ALG_NONE; - priv->tx_key = 0; - priv->wpa_enabled = 0; - priv->tkip_cm_active = 0; - priv->key_mgmt = 0; - priv->wpa_ie_len = 0; - priv->wpa_ie = NULL; - - /* Make the hardware available, as long as it hasn't been - * removed elsewhere (e.g. by PCMCIA hot unplug) */ - spin_lock_irq(&priv->lock); - priv->hw_unavailable--; - spin_unlock_irq(&priv->lock); - - printk(KERN_DEBUG "%s: ready\n", dev->name); - - out: - return err; -} - -struct net_device -*alloc_orinocodev(int sizeof_card, - struct device *device, - int (*hard_reset)(struct orinoco_private *), - int (*stop_fw)(struct orinoco_private *, int)) -{ - struct net_device *dev; - struct orinoco_private *priv; - - dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card); - if (! dev) - return NULL; - priv = netdev_priv(dev); - priv->ndev = dev; - if (sizeof_card) - priv->card = (void *)((unsigned long)priv - + sizeof(struct orinoco_private)); - else - priv->card = NULL; - priv->dev = device; - - /* Setup / override net_device fields */ - dev->init = orinoco_init; - dev->hard_start_xmit = orinoco_xmit; - dev->tx_timeout = orinoco_tx_timeout; - dev->watchdog_timeo = HZ; /* 1 second timeout */ - dev->get_stats = orinoco_get_stats; - dev->ethtool_ops = &orinoco_ethtool_ops; - dev->wireless_handlers = (struct iw_handler_def *)&orinoco_handler_def; -#ifdef WIRELESS_SPY - priv->wireless_data.spy_data = &priv->spy_data; - dev->wireless_data = &priv->wireless_data; -#endif - dev->change_mtu = orinoco_change_mtu; - dev->set_multicast_list = orinoco_set_multicast_list; - /* we use the default eth_mac_addr for setting the MAC addr */ - - /* Reserve space in skb for the SNAP header */ - dev->hard_header_len += ENCAPS_OVERHEAD; - - /* Set up default callbacks */ - dev->open = orinoco_open; - dev->stop = orinoco_stop; - priv->hard_reset = hard_reset; - priv->stop_fw = stop_fw; - - spin_lock_init(&priv->lock); - priv->open = 0; - priv->hw_unavailable = 1; /* orinoco_init() must clear this - * before anything else touches the - * hardware */ - INIT_WORK(&priv->reset_work, orinoco_reset); - INIT_WORK(&priv->join_work, orinoco_join_ap); - INIT_WORK(&priv->wevent_work, orinoco_send_wevents); - - INIT_LIST_HEAD(&priv->rx_list); - tasklet_init(&priv->rx_tasklet, orinoco_rx_isr_tasklet, - (unsigned long) dev); - - netif_carrier_off(dev); - priv->last_linkstatus = 0xffff; - - priv->cached_pri_fw = NULL; - priv->cached_fw = NULL; - - /* Register PM notifiers */ - orinoco_register_pm_notifier(priv); - - return dev; -} - -void free_orinocodev(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct orinoco_rx_data *rx_data, *temp; - - /* If the tasklet is scheduled when we call tasklet_kill it - * will run one final time. However the tasklet will only - * drain priv->rx_list if the hw is still available. */ - tasklet_kill(&priv->rx_tasklet); - - /* Explicitly drain priv->rx_list */ - list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) { - list_del(&rx_data->list); - - dev_kfree_skb(rx_data->skb); - kfree(rx_data->desc); - kfree(rx_data); - } - - orinoco_unregister_pm_notifier(priv); - orinoco_uncache_fw(priv); - - priv->wpa_ie_len = 0; - kfree(priv->wpa_ie); - orinoco_mic_free(priv); - orinoco_bss_data_free(priv); - free_netdev(dev); -} - -/********************************************************************/ -/* Wireless extensions */ -/********************************************************************/ - -/* Return : < 0 -> error code ; >= 0 -> length */ -static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, - char buf[IW_ESSID_MAX_SIZE+1]) -{ - hermes_t *hw = &priv->hw; - int err = 0; - struct hermes_idstring essidbuf; - char *p = (char *)(&essidbuf.val); - int len; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if (strlen(priv->desired_essid) > 0) { - /* We read the desired SSID from the hardware rather - than from priv->desired_essid, just in case the - firmware is allowed to change it on us. I'm not - sure about this */ - /* My guess is that the OWNSSID should always be whatever - * we set to the card, whereas CURRENT_SSID is the one that - * may change... - Jean II */ - u16 rid; - - *active = 1; - - rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID : - HERMES_RID_CNFDESIREDSSID; - - err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf), - NULL, &essidbuf); - if (err) - goto fail_unlock; - } else { - *active = 0; - - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID, - sizeof(essidbuf), NULL, &essidbuf); - if (err) - goto fail_unlock; - } - - len = le16_to_cpu(essidbuf.len); - BUG_ON(len > IW_ESSID_MAX_SIZE); - - memset(buf, 0, IW_ESSID_MAX_SIZE); - memcpy(buf, p, len); - err = len; - - fail_unlock: - orinoco_unlock(priv, &flags); - - return err; -} - -static long orinoco_hw_get_freq(struct orinoco_private *priv) -{ - - hermes_t *hw = &priv->hw; - int err = 0; - u16 channel; - long freq = 0; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel); - if (err) - goto out; - - /* Intersil firmware 1.3.5 returns 0 when the interface is down */ - if (channel == 0) { - err = -EBUSY; - goto out; - } - - if ( (channel < 1) || (channel > NUM_CHANNELS) ) { - printk(KERN_WARNING "%s: Channel out of range (%d)!\n", - priv->ndev->name, channel); - err = -EBUSY; - goto out; - - } - freq = channel_frequency[channel-1] * 100000; - - out: - orinoco_unlock(priv, &flags); - - if (err > 0) - err = -EBUSY; - return err ? err : freq; -} - -static int orinoco_hw_get_bitratelist(struct orinoco_private *priv, - int *numrates, s32 *rates, int max) -{ - hermes_t *hw = &priv->hw; - struct hermes_idstring list; - unsigned char *p = (unsigned char *)&list.val; - int err = 0; - int num; - int i; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES, - sizeof(list), NULL, &list); - orinoco_unlock(priv, &flags); - - if (err) - return err; - - num = le16_to_cpu(list.len); - *numrates = num; - num = min(num, max); - - for (i = 0; i < num; i++) { - rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */ - } - - return 0; -} - -static int orinoco_ioctl_getname(struct net_device *dev, - struct iw_request_info *info, - char *name, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int numrates; - int err; - - err = orinoco_hw_get_bitratelist(priv, &numrates, NULL, 0); - - if (!err && (numrates > 2)) - strcpy(name, "IEEE 802.11b"); - else - strcpy(name, "IEEE 802.11-DS"); - - return 0; -} - -static int orinoco_ioctl_setwap(struct net_device *dev, - struct iw_request_info *info, - struct sockaddr *ap_addr, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int err = -EINPROGRESS; /* Call commit handler */ - unsigned long flags; - static const u8 off_addr[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - static const u8 any_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - /* Enable automatic roaming - no sanity checks are needed */ - if (memcmp(&ap_addr->sa_data, off_addr, ETH_ALEN) == 0 || - memcmp(&ap_addr->sa_data, any_addr, ETH_ALEN) == 0) { - priv->bssid_fixed = 0; - memset(priv->desired_bssid, 0, ETH_ALEN); - - /* "off" means keep existing connection */ - if (ap_addr->sa_data[0] == 0) { - __orinoco_hw_set_wap(priv); - err = 0; - } - goto out; - } - - if (priv->firmware_type == FIRMWARE_TYPE_AGERE) { - printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't " - "support manual roaming\n", - dev->name); - err = -EOPNOTSUPP; - goto out; - } - - if (priv->iw_mode != IW_MODE_INFRA) { - printk(KERN_WARNING "%s: Manual roaming supported only in " - "managed mode\n", dev->name); - err = -EOPNOTSUPP; - goto out; - } - - /* Intersil firmware hangs without Desired ESSID */ - if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL && - strlen(priv->desired_essid) == 0) { - printk(KERN_WARNING "%s: Desired ESSID must be set for " - "manual roaming\n", dev->name); - err = -EOPNOTSUPP; - goto out; - } - - /* Finally, enable manual roaming */ - priv->bssid_fixed = 1; - memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN); - - out: - orinoco_unlock(priv, &flags); - return err; -} - -static int orinoco_ioctl_getwap(struct net_device *dev, - struct iw_request_info *info, - struct sockaddr *ap_addr, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - - hermes_t *hw = &priv->hw; - int err = 0; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - ap_addr->sa_family = ARPHRD_ETHER; - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, - ETH_ALEN, NULL, ap_addr->sa_data); - - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_setmode(struct net_device *dev, - struct iw_request_info *info, - u32 *mode, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int err = -EINPROGRESS; /* Call commit handler */ - unsigned long flags; - - if (priv->iw_mode == *mode) - return 0; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - switch (*mode) { - case IW_MODE_ADHOC: - if (!priv->has_ibss && !priv->has_port3) - err = -EOPNOTSUPP; - break; - - case IW_MODE_INFRA: - break; - - case IW_MODE_MONITOR: - if (priv->broken_monitor && !force_monitor) { - printk(KERN_WARNING "%s: Monitor mode support is " - "buggy in this firmware, not enabling\n", - dev->name); - err = -EOPNOTSUPP; - } - break; - - default: - err = -EOPNOTSUPP; - break; - } - - if (err == -EINPROGRESS) { - priv->iw_mode = *mode; - set_port_type(priv); - } - - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_getmode(struct net_device *dev, - struct iw_request_info *info, - u32 *mode, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - - *mode = priv->iw_mode; - return 0; -} - -static int orinoco_ioctl_getiwrange(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *rrq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int err = 0; - struct iw_range *range = (struct iw_range *) extra; - int numrates; - int i, k; - - rrq->length = sizeof(struct iw_range); - memset(range, 0, sizeof(struct iw_range)); - - range->we_version_compiled = WIRELESS_EXT; - range->we_version_source = 22; - - /* Set available channels/frequencies */ - range->num_channels = NUM_CHANNELS; - k = 0; - for (i = 0; i < NUM_CHANNELS; i++) { - if (priv->channel_mask & (1 << i)) { - range->freq[k].i = i + 1; - range->freq[k].m = channel_frequency[i] * 100000; - range->freq[k].e = 1; - k++; - } - - if (k >= IW_MAX_FREQUENCIES) - break; - } - range->num_frequency = k; - range->sensitivity = 3; - - if (priv->has_wep) { - range->max_encoding_tokens = ORINOCO_MAX_KEYS; - range->encoding_size[0] = SMALL_KEY_SIZE; - range->num_encoding_sizes = 1; - - if (priv->has_big_wep) { - range->encoding_size[1] = LARGE_KEY_SIZE; - range->num_encoding_sizes = 2; - } - } - - if (priv->has_wpa) - range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_CIPHER_TKIP; - - if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))){ - /* Quality stats meaningless in ad-hoc mode */ - } else { - range->max_qual.qual = 0x8b - 0x2f; - range->max_qual.level = 0x2f - 0x95 - 1; - range->max_qual.noise = 0x2f - 0x95 - 1; - /* Need to get better values */ - range->avg_qual.qual = 0x24; - range->avg_qual.level = 0xC2; - range->avg_qual.noise = 0x9E; - } - - err = orinoco_hw_get_bitratelist(priv, &numrates, - range->bitrate, IW_MAX_BITRATES); - if (err) - return err; - range->num_bitrates = numrates; - - /* Set an indication of the max TCP throughput in bit/s that we can - * expect using this interface. May be use for QoS stuff... - * Jean II */ - if (numrates > 2) - range->throughput = 5 * 1000 * 1000; /* ~5 Mb/s */ - else - range->throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */ - - range->min_rts = 0; - range->max_rts = 2347; - range->min_frag = 256; - range->max_frag = 2346; - - range->min_pmp = 0; - range->max_pmp = 65535000; - range->min_pmt = 0; - range->max_pmt = 65535 * 1000; /* ??? */ - range->pmp_flags = IW_POWER_PERIOD; - range->pmt_flags = IW_POWER_TIMEOUT; - range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R; - - range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME; - range->retry_flags = IW_RETRY_LIMIT; - range->r_time_flags = IW_RETRY_LIFETIME; - range->min_retry = 0; - range->max_retry = 65535; /* ??? */ - range->min_r_time = 0; - range->max_r_time = 65535 * 1000; /* ??? */ - - if (priv->firmware_type == FIRMWARE_TYPE_AGERE) - range->scan_capa = IW_SCAN_CAPA_ESSID; - else - range->scan_capa = IW_SCAN_CAPA_NONE; - - /* Event capability (kernel) */ - IW_EVENT_CAPA_SET_KERNEL(range->event_capa); - /* Event capability (driver) */ - IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY); - IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP); - IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN); - IW_EVENT_CAPA_SET(range->event_capa, IWEVTXDROP); - - return 0; -} - -static int orinoco_ioctl_setiwencode(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *erq, - char *keybuf) -{ - struct orinoco_private *priv = netdev_priv(dev); - int index = (erq->flags & IW_ENCODE_INDEX) - 1; - int setindex = priv->tx_key; - int encode_alg = priv->encode_alg; - int restricted = priv->wep_restrict; - u16 xlen = 0; - int err = -EINPROGRESS; /* Call commit handler */ - unsigned long flags; - - if (! priv->has_wep) - return -EOPNOTSUPP; - - if (erq->pointer) { - /* We actually have a key to set - check its length */ - if (erq->length > LARGE_KEY_SIZE) - return -E2BIG; - - if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep ) - return -E2BIG; - } - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - /* Clear any TKIP key we have */ - if ((priv->has_wpa) && (priv->encode_alg == IW_ENCODE_ALG_TKIP)) - (void) orinoco_clear_tkip_key(priv, setindex); - - if (erq->length > 0) { - if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) - index = priv->tx_key; - - /* Adjust key length to a supported value */ - if (erq->length > SMALL_KEY_SIZE) { - xlen = LARGE_KEY_SIZE; - } else if (erq->length > 0) { - xlen = SMALL_KEY_SIZE; - } else - xlen = 0; - - /* Switch on WEP if off */ - if ((encode_alg != IW_ENCODE_ALG_WEP) && (xlen > 0)) { - setindex = index; - encode_alg = IW_ENCODE_ALG_WEP; - } - } else { - /* Important note : if the user do "iwconfig eth0 enc off", - * we will arrive there with an index of -1. This is valid - * but need to be taken care off... Jean II */ - if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) { - if((index != -1) || (erq->flags == 0)) { - err = -EINVAL; - goto out; - } - } else { - /* Set the index : Check that the key is valid */ - if(priv->keys[index].len == 0) { - err = -EINVAL; - goto out; - } - setindex = index; - } - } - - if (erq->flags & IW_ENCODE_DISABLED) - encode_alg = IW_ENCODE_ALG_NONE; - if (erq->flags & IW_ENCODE_OPEN) - restricted = 0; - if (erq->flags & IW_ENCODE_RESTRICTED) - restricted = 1; - - if (erq->pointer && erq->length > 0) { - priv->keys[index].len = cpu_to_le16(xlen); - memset(priv->keys[index].data, 0, - sizeof(priv->keys[index].data)); - memcpy(priv->keys[index].data, keybuf, erq->length); - } - priv->tx_key = setindex; - - /* Try fast key change if connected and only keys are changed */ - if ((priv->encode_alg == encode_alg) && - (priv->wep_restrict == restricted) && - netif_carrier_ok(dev)) { - err = __orinoco_hw_setup_wepkeys(priv); - /* No need to commit if successful */ - goto out; - } - - priv->encode_alg = encode_alg; - priv->wep_restrict = restricted; - - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_getiwencode(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *erq, - char *keybuf) -{ - struct orinoco_private *priv = netdev_priv(dev); - int index = (erq->flags & IW_ENCODE_INDEX) - 1; - u16 xlen = 0; - unsigned long flags; - - if (! priv->has_wep) - return -EOPNOTSUPP; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) - index = priv->tx_key; - - erq->flags = 0; - if (!priv->encode_alg) - erq->flags |= IW_ENCODE_DISABLED; - erq->flags |= index + 1; - - if (priv->wep_restrict) - erq->flags |= IW_ENCODE_RESTRICTED; - else - erq->flags |= IW_ENCODE_OPEN; - - xlen = le16_to_cpu(priv->keys[index].len); - - erq->length = xlen; - - memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE); - - orinoco_unlock(priv, &flags); - return 0; -} - -static int orinoco_ioctl_setessid(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *erq, - char *essidbuf) -{ - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - - /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it - * anyway... - Jean II */ - - /* Hum... Should not use Wireless Extension constant (may change), - * should use our own... - Jean II */ - if (erq->length > IW_ESSID_MAX_SIZE) - return -E2BIG; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - /* NULL the string (for NULL termination & ESSID = ANY) - Jean II */ - memset(priv->desired_essid, 0, sizeof(priv->desired_essid)); - - /* If not ANY, get the new ESSID */ - if (erq->flags) { - memcpy(priv->desired_essid, essidbuf, erq->length); - } - - orinoco_unlock(priv, &flags); - - return -EINPROGRESS; /* Call commit handler */ -} - -static int orinoco_ioctl_getessid(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *erq, - char *essidbuf) -{ - struct orinoco_private *priv = netdev_priv(dev); - int active; - int err = 0; - unsigned long flags; - - if (netif_running(dev)) { - err = orinoco_hw_get_essid(priv, &active, essidbuf); - if (err < 0) - return err; - erq->length = err; - } else { - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE); - erq->length = strlen(priv->desired_essid); - orinoco_unlock(priv, &flags); - } - - erq->flags = 1; - - return 0; -} - -static int orinoco_ioctl_setnick(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *nrq, - char *nickbuf) -{ - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - - if (nrq->length > IW_ESSID_MAX_SIZE) - return -E2BIG; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - memset(priv->nick, 0, sizeof(priv->nick)); - memcpy(priv->nick, nickbuf, nrq->length); - - orinoco_unlock(priv, &flags); - - return -EINPROGRESS; /* Call commit handler */ -} - -static int orinoco_ioctl_getnick(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *nrq, - char *nickbuf) -{ - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE); - orinoco_unlock(priv, &flags); - - nrq->length = strlen(priv->nick); - - return 0; -} - -static int orinoco_ioctl_setfreq(struct net_device *dev, - struct iw_request_info *info, - struct iw_freq *frq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int chan = -1; - unsigned long flags; - int err = -EINPROGRESS; /* Call commit handler */ - - /* In infrastructure mode the AP sets the channel */ - if (priv->iw_mode == IW_MODE_INFRA) - return -EBUSY; - - if ( (frq->e == 0) && (frq->m <= 1000) ) { - /* Setting by channel number */ - chan = frq->m; - } else { - /* Setting by frequency - search the table */ - int mult = 1; - int i; - - for (i = 0; i < (6 - frq->e); i++) - mult *= 10; - - for (i = 0; i < NUM_CHANNELS; i++) - if (frq->m == (channel_frequency[i] * mult)) - chan = i+1; - } - - if ( (chan < 1) || (chan > NUM_CHANNELS) || - ! (priv->channel_mask & (1 << (chan-1)) ) ) - return -EINVAL; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - priv->channel = chan; - if (priv->iw_mode == IW_MODE_MONITOR) { - /* Fast channel change - no commit if successful */ - hermes_t *hw = &priv->hw; - err = hermes_docmd_wait(hw, HERMES_CMD_TEST | - HERMES_TEST_SET_CHANNEL, - chan, NULL); - } - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_getfreq(struct net_device *dev, - struct iw_request_info *info, - struct iw_freq *frq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int tmp; - - /* Locking done in there */ - tmp = orinoco_hw_get_freq(priv); - if (tmp < 0) { - return tmp; - } - - frq->m = tmp; - frq->e = 1; - - return 0; -} - -static int orinoco_ioctl_getsens(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *srq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - u16 val; - int err; - unsigned long flags; - - if (!priv->has_sensitivity) - return -EOPNOTSUPP; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFSYSTEMSCALE, &val); - orinoco_unlock(priv, &flags); - - if (err) - return err; - - srq->value = val; - srq->fixed = 0; /* auto */ - - return 0; -} - -static int orinoco_ioctl_setsens(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *srq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int val = srq->value; - unsigned long flags; - - if (!priv->has_sensitivity) - return -EOPNOTSUPP; - - if ((val < 1) || (val > 3)) - return -EINVAL; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - priv->ap_density = val; - orinoco_unlock(priv, &flags); - - return -EINPROGRESS; /* Call commit handler */ -} - -static int orinoco_ioctl_setrts(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *rrq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int val = rrq->value; - unsigned long flags; - - if (rrq->disabled) - val = 2347; - - if ( (val < 0) || (val > 2347) ) - return -EINVAL; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - priv->rts_thresh = val; - orinoco_unlock(priv, &flags); - - return -EINPROGRESS; /* Call commit handler */ -} - -static int orinoco_ioctl_getrts(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *rrq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - - rrq->value = priv->rts_thresh; - rrq->disabled = (rrq->value == 2347); - rrq->fixed = 1; - - return 0; -} - -static int orinoco_ioctl_setfrag(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *frq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int err = -EINPROGRESS; /* Call commit handler */ - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if (priv->has_mwo) { - if (frq->disabled) - priv->mwo_robust = 0; - else { - if (frq->fixed) - printk(KERN_WARNING "%s: Fixed fragmentation is " - "not supported on this firmware. " - "Using MWO robust instead.\n", dev->name); - priv->mwo_robust = 1; - } - } else { - if (frq->disabled) - priv->frag_thresh = 2346; - else { - if ( (frq->value < 256) || (frq->value > 2346) ) - err = -EINVAL; - else - priv->frag_thresh = frq->value & ~0x1; /* must be even */ - } - } - - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_getfrag(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *frq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int err; - u16 val; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if (priv->has_mwo) { - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFMWOROBUST_AGERE, - &val); - if (err) - val = 0; - - frq->value = val ? 2347 : 0; - frq->disabled = ! val; - frq->fixed = 0; - } else { - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, - &val); - if (err) - val = 0; - - frq->value = val; - frq->disabled = (val >= 2346); - frq->fixed = 1; - } - - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_setrate(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *rrq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int ratemode = -1; - int bitrate; /* 100s of kilobits */ - int i; - unsigned long flags; - - /* As the user space doesn't know our highest rate, it uses -1 - * to ask us to set the highest rate. Test it using "iwconfig - * ethX rate auto" - Jean II */ - if (rrq->value == -1) - bitrate = 110; - else { - if (rrq->value % 100000) - return -EINVAL; - bitrate = rrq->value / 100000; - } - - if ( (bitrate != 10) && (bitrate != 20) && - (bitrate != 55) && (bitrate != 110) ) - return -EINVAL; - - for (i = 0; i < BITRATE_TABLE_SIZE; i++) - if ( (bitrate_table[i].bitrate == bitrate) && - (bitrate_table[i].automatic == ! rrq->fixed) ) { - ratemode = i; - break; - } - - if (ratemode == -1) - return -EINVAL; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - priv->bitratemode = ratemode; - orinoco_unlock(priv, &flags); - - return -EINPROGRESS; -} - -static int orinoco_ioctl_getrate(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *rrq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int err = 0; - int ratemode; - int i; - u16 val; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - ratemode = priv->bitratemode; - - BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE)); - - rrq->value = bitrate_table[ratemode].bitrate * 100000; - rrq->fixed = ! bitrate_table[ratemode].automatic; - rrq->disabled = 0; - - /* If the interface is running we try to find more about the - current mode */ - if (netif_running(dev)) { - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CURRENTTXRATE, &val); - if (err) - goto out; - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: /* Lucent style rate */ - /* Note : in Lucent firmware, the return value of - * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s, - * and therefore is totally different from the - * encoding of HERMES_RID_CNFTXRATECONTROL. - * Don't forget that 6Mb/s is really 5.5Mb/s */ - if (val == 6) - rrq->value = 5500000; - else - rrq->value = val * 1000000; - break; - case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */ - case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */ - for (i = 0; i < BITRATE_TABLE_SIZE; i++) - if (bitrate_table[i].intersil_txratectrl == val) { - ratemode = i; - break; - } - if (i >= BITRATE_TABLE_SIZE) - printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n", - dev->name, val); - - rrq->value = bitrate_table[ratemode].bitrate * 100000; - break; - default: - BUG(); - } - } - - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_setpower(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *prq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int err = -EINPROGRESS; /* Call commit handler */ - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if (prq->disabled) { - priv->pm_on = 0; - } else { - switch (prq->flags & IW_POWER_MODE) { - case IW_POWER_UNICAST_R: - priv->pm_mcast = 0; - priv->pm_on = 1; - break; - case IW_POWER_ALL_R: - priv->pm_mcast = 1; - priv->pm_on = 1; - break; - case IW_POWER_ON: - /* No flags : but we may have a value - Jean II */ - break; - default: - err = -EINVAL; - goto out; - } - - if (prq->flags & IW_POWER_TIMEOUT) { - priv->pm_on = 1; - priv->pm_timeout = prq->value / 1000; - } - if (prq->flags & IW_POWER_PERIOD) { - priv->pm_on = 1; - priv->pm_period = prq->value / 1000; - } - /* It's valid to not have a value if we are just toggling - * the flags... Jean II */ - if(!priv->pm_on) { - err = -EINVAL; - goto out; - } - } - - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_getpower(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *prq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int err = 0; - u16 enable, period, timeout, mcast; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, &enable); - if (err) - goto out; - - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFMAXSLEEPDURATION, &period); - if (err) - goto out; - - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, &timeout); - if (err) - goto out; - - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, &mcast); - if (err) - goto out; - - prq->disabled = !enable; - /* Note : by default, display the period */ - if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { - prq->flags = IW_POWER_TIMEOUT; - prq->value = timeout * 1000; - } else { - prq->flags = IW_POWER_PERIOD; - prq->value = period * 1000; - } - if (mcast) - prq->flags |= IW_POWER_ALL_R; - else - prq->flags |= IW_POWER_UNICAST_R; - - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_set_encodeext(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct iw_point *encoding = &wrqu->encoding; - struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; - int idx, alg = ext->alg, set_key = 1; - unsigned long flags; - int err = -EINVAL; - u16 key_len; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - /* Determine and validate the key index */ - idx = encoding->flags & IW_ENCODE_INDEX; - if (idx) { - if ((idx < 1) || (idx > 4)) - goto out; - idx--; - } else - idx = priv->tx_key; - - if (encoding->flags & IW_ENCODE_DISABLED) - alg = IW_ENCODE_ALG_NONE; - - if (priv->has_wpa && (alg != IW_ENCODE_ALG_TKIP)) { - /* Clear any TKIP TX key we had */ - (void) orinoco_clear_tkip_key(priv, priv->tx_key); - } - - if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { - priv->tx_key = idx; - set_key = ((alg == IW_ENCODE_ALG_TKIP) || - (ext->key_len > 0)) ? 1 : 0; - } - - if (set_key) { - /* Set the requested key first */ - switch (alg) { - case IW_ENCODE_ALG_NONE: - priv->encode_alg = alg; - priv->keys[idx].len = 0; - break; - - case IW_ENCODE_ALG_WEP: - if (ext->key_len > SMALL_KEY_SIZE) - key_len = LARGE_KEY_SIZE; - else if (ext->key_len > 0) - key_len = SMALL_KEY_SIZE; - else - goto out; - - priv->encode_alg = alg; - priv->keys[idx].len = cpu_to_le16(key_len); - - key_len = min(ext->key_len, key_len); - - memset(priv->keys[idx].data, 0, ORINOCO_MAX_KEY_SIZE); - memcpy(priv->keys[idx].data, ext->key, key_len); - break; - - case IW_ENCODE_ALG_TKIP: - { - hermes_t *hw = &priv->hw; - u8 *tkip_iv = NULL; - - if (!priv->has_wpa || - (ext->key_len > sizeof(priv->tkip_key[0]))) - goto out; - - priv->encode_alg = alg; - memset(&priv->tkip_key[idx], 0, - sizeof(priv->tkip_key[idx])); - memcpy(&priv->tkip_key[idx], ext->key, ext->key_len); - - if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) - tkip_iv = &ext->rx_seq[0]; - - err = __orinoco_hw_set_tkip_key(hw, idx, - ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY, - (u8 *) &priv->tkip_key[idx], - tkip_iv, NULL); - if (err) - printk(KERN_ERR "%s: Error %d setting TKIP key" - "\n", dev->name, err); - - goto out; - } - default: - goto out; - } - } - err = -EINPROGRESS; - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_get_encodeext(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct iw_point *encoding = &wrqu->encoding; - struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; - int idx, max_key_len; - unsigned long flags; - int err; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = -EINVAL; - max_key_len = encoding->length - sizeof(*ext); - if (max_key_len < 0) - goto out; - - idx = encoding->flags & IW_ENCODE_INDEX; - if (idx) { - if ((idx < 1) || (idx > 4)) - goto out; - idx--; - } else - idx = priv->tx_key; - - encoding->flags = idx + 1; - memset(ext, 0, sizeof(*ext)); - - ext->alg = priv->encode_alg; - switch (priv->encode_alg) { - case IW_ENCODE_ALG_NONE: - ext->key_len = 0; - encoding->flags |= IW_ENCODE_DISABLED; - break; - case IW_ENCODE_ALG_WEP: - ext->key_len = min_t(u16, le16_to_cpu(priv->keys[idx].len), - max_key_len); - memcpy(ext->key, priv->keys[idx].data, ext->key_len); - encoding->flags |= IW_ENCODE_ENABLED; - break; - case IW_ENCODE_ALG_TKIP: - ext->key_len = min_t(u16, sizeof(struct orinoco_tkip_key), - max_key_len); - memcpy(ext->key, &priv->tkip_key[idx], ext->key_len); - encoding->flags |= IW_ENCODE_ENABLED; - break; - } - - err = 0; - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_set_auth(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - struct iw_param *param = &wrqu->param; - unsigned long flags; - int ret = -EINPROGRESS; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - switch (param->flags & IW_AUTH_INDEX) { - case IW_AUTH_WPA_VERSION: - case IW_AUTH_CIPHER_PAIRWISE: - case IW_AUTH_CIPHER_GROUP: - case IW_AUTH_RX_UNENCRYPTED_EAPOL: - case IW_AUTH_PRIVACY_INVOKED: - case IW_AUTH_DROP_UNENCRYPTED: - /* - * orinoco does not use these parameters - */ - break; - - case IW_AUTH_KEY_MGMT: - /* wl_lkm implies value 2 == PSK for Hermes I - * which ties in with WEXT - * no other hints tho :( - */ - priv->key_mgmt = param->value; - break; - - case IW_AUTH_TKIP_COUNTERMEASURES: - /* When countermeasures are enabled, shut down the - * card; when disabled, re-enable the card. This must - * take effect immediately. - * - * TODO: Make sure that the EAPOL message is getting - * out before card disabled - */ - if (param->value) { - priv->tkip_cm_active = 1; - ret = hermes_enable_port(hw, 0); - } else { - priv->tkip_cm_active = 0; - ret = hermes_disable_port(hw, 0); - } - break; - - case IW_AUTH_80211_AUTH_ALG: - if (param->value & IW_AUTH_ALG_SHARED_KEY) - priv->wep_restrict = 1; - else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) - priv->wep_restrict = 0; - else - ret = -EINVAL; - break; - - case IW_AUTH_WPA_ENABLED: - if (priv->has_wpa) { - priv->wpa_enabled = param->value ? 1 : 0; - } else { - if (param->value) - ret = -EOPNOTSUPP; - /* else silently accept disable of WPA */ - priv->wpa_enabled = 0; - } - break; - - default: - ret = -EOPNOTSUPP; - } - - orinoco_unlock(priv, &flags); - return ret; -} - -static int orinoco_ioctl_get_auth(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct iw_param *param = &wrqu->param; - unsigned long flags; - int ret = 0; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - switch (param->flags & IW_AUTH_INDEX) { - case IW_AUTH_KEY_MGMT: - param->value = priv->key_mgmt; - break; - - case IW_AUTH_TKIP_COUNTERMEASURES: - param->value = priv->tkip_cm_active; - break; - - case IW_AUTH_80211_AUTH_ALG: - if (priv->wep_restrict) - param->value = IW_AUTH_ALG_SHARED_KEY; - else - param->value = IW_AUTH_ALG_OPEN_SYSTEM; - break; - - case IW_AUTH_WPA_ENABLED: - param->value = priv->wpa_enabled; - break; - - default: - ret = -EOPNOTSUPP; - } - - orinoco_unlock(priv, &flags); - return ret; -} - -static int orinoco_ioctl_set_genie(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - u8 *buf; - unsigned long flags; - - /* cut off at IEEE80211_MAX_DATA_LEN */ - if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) || - (wrqu->data.length && (extra == NULL))) - return -EINVAL; - - if (wrqu->data.length) { - buf = kmalloc(wrqu->data.length, GFP_KERNEL); - if (buf == NULL) - return -ENOMEM; - - memcpy(buf, extra, wrqu->data.length); - } else - buf = NULL; - - if (orinoco_lock(priv, &flags) != 0) { - kfree(buf); - return -EBUSY; - } - - kfree(priv->wpa_ie); - priv->wpa_ie = buf; - priv->wpa_ie_len = wrqu->data.length; - - if (priv->wpa_ie) { - /* Looks like wl_lkm wants to check the auth alg, and - * somehow pass it to the firmware. - * Instead it just calls the key mgmt rid - * - we do this in set auth. - */ - } - - orinoco_unlock(priv, &flags); - return 0; -} - -static int orinoco_ioctl_get_genie(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - int err = 0; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if ((priv->wpa_ie_len == 0) || (priv->wpa_ie == NULL)) { - wrqu->data.length = 0; - goto out; - } - - if (wrqu->data.length < priv->wpa_ie_len) { - err = -E2BIG; - goto out; - } - - wrqu->data.length = priv->wpa_ie_len; - memcpy(extra, priv->wpa_ie, priv->wpa_ie_len); - -out: - orinoco_unlock(priv, &flags); - return err; -} - -static int orinoco_ioctl_set_mlme(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - struct iw_mlme *mlme = (struct iw_mlme *)extra; - unsigned long flags; - int ret = 0; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - switch (mlme->cmd) { - case IW_MLME_DEAUTH: - /* silently ignore */ - break; - - case IW_MLME_DISASSOC: - { - struct { - u8 addr[ETH_ALEN]; - __le16 reason_code; - } __attribute__ ((packed)) buf; - - memcpy(buf.addr, mlme->addr.sa_data, ETH_ALEN); - buf.reason_code = cpu_to_le16(mlme->reason_code); - ret = HERMES_WRITE_RECORD(hw, USER_BAP, - HERMES_RID_CNFDISASSOCIATE, - &buf); - break; - } - default: - ret = -EOPNOTSUPP; - } - - orinoco_unlock(priv, &flags); - return ret; -} - -static int orinoco_ioctl_getretry(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *rrq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int err = 0; - u16 short_limit, long_limit, lifetime; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT, - &short_limit); - if (err) - goto out; - - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT, - &long_limit); - if (err) - goto out; - - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME, - &lifetime); - if (err) - goto out; - - rrq->disabled = 0; /* Can't be disabled */ - - /* Note : by default, display the retry number */ - if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { - rrq->flags = IW_RETRY_LIFETIME; - rrq->value = lifetime * 1000; /* ??? */ - } else { - /* By default, display the min number */ - if ((rrq->flags & IW_RETRY_LONG)) { - rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG; - rrq->value = long_limit; - } else { - rrq->flags = IW_RETRY_LIMIT; - rrq->value = short_limit; - if(short_limit != long_limit) - rrq->flags |= IW_RETRY_SHORT; - } - } - - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_reset(struct net_device *dev, - struct iw_request_info *info, - void *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - - if (! capable(CAP_NET_ADMIN)) - return -EPERM; - - if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) { - printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name); - - /* Firmware reset */ - orinoco_reset(&priv->reset_work); - } else { - printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name); - - schedule_work(&priv->reset_work); - } - - return 0; -} - -static int orinoco_ioctl_setibssport(struct net_device *dev, - struct iw_request_info *info, - void *wrqu, - char *extra) - -{ - struct orinoco_private *priv = netdev_priv(dev); - int val = *( (int *) extra ); - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - priv->ibss_port = val ; - - /* Actually update the mode we are using */ - set_port_type(priv); - - orinoco_unlock(priv, &flags); - return -EINPROGRESS; /* Call commit handler */ -} - -static int orinoco_ioctl_getibssport(struct net_device *dev, - struct iw_request_info *info, - void *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int *val = (int *) extra; - - *val = priv->ibss_port; - return 0; -} - -static int orinoco_ioctl_setport3(struct net_device *dev, - struct iw_request_info *info, - void *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int val = *( (int *) extra ); - int err = 0; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - switch (val) { - case 0: /* Try to do IEEE ad-hoc mode */ - if (! priv->has_ibss) { - err = -EINVAL; - break; - } - priv->prefer_port3 = 0; - - break; - - case 1: /* Try to do Lucent proprietary ad-hoc mode */ - if (! priv->has_port3) { - err = -EINVAL; - break; - } - priv->prefer_port3 = 1; - break; - - default: - err = -EINVAL; - } - - if (! err) { - /* Actually update the mode we are using */ - set_port_type(priv); - err = -EINPROGRESS; - } - - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_getport3(struct net_device *dev, - struct iw_request_info *info, - void *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int *val = (int *) extra; - - *val = priv->prefer_port3; - return 0; -} - -static int orinoco_ioctl_setpreamble(struct net_device *dev, - struct iw_request_info *info, - void *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - int val; - - if (! priv->has_preamble) - return -EOPNOTSUPP; - - /* 802.11b has recently defined some short preamble. - * Basically, the Phy header has been reduced in size. - * This increase performance, especially at high rates - * (the preamble is transmitted at 1Mb/s), unfortunately - * this give compatibility troubles... - Jean II */ - val = *( (int *) extra ); - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if (val) - priv->preamble = 1; - else - priv->preamble = 0; - - orinoco_unlock(priv, &flags); - - return -EINPROGRESS; /* Call commit handler */ -} - -static int orinoco_ioctl_getpreamble(struct net_device *dev, - struct iw_request_info *info, - void *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int *val = (int *) extra; - - if (! priv->has_preamble) - return -EOPNOTSUPP; - - *val = priv->preamble; - return 0; -} - -/* ioctl interface to hermes_read_ltv() - * To use with iwpriv, pass the RID as the token argument, e.g. - * iwpriv get_rid [0xfc00] - * At least Wireless Tools 25 is required to use iwpriv. - * For Wireless Tools 25 and 26 append "dummy" are the end. */ -static int orinoco_ioctl_getrid(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *data, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int rid = data->flags; - u16 length; - int err; - unsigned long flags; - - /* It's a "get" function, but we don't want users to access the - * WEP key and other raw firmware data */ - if (! capable(CAP_NET_ADMIN)) - return -EPERM; - - if (rid < 0xfc00 || rid > 0xffff) - return -EINVAL; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = hermes_read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length, - extra); - if (err) - goto out; - - data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length), - MAX_RID_LEN); - - out: - orinoco_unlock(priv, &flags); - return err; -} - -/* Trigger a scan (look for other cells in the vicinity) */ -static int orinoco_ioctl_setscan(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *srq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - struct iw_scan_req *si = (struct iw_scan_req *) extra; - int err = 0; - unsigned long flags; - - /* Note : you may have realised that, as this is a SET operation, - * this is privileged and therefore a normal user can't - * perform scanning. - * This is not an error, while the device perform scanning, - * traffic doesn't flow, so it's a perfect DoS... - * Jean II */ - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - /* Scanning with port 0 disabled would fail */ - if (!netif_running(dev)) { - err = -ENETDOWN; - goto out; - } - - /* In monitor mode, the scan results are always empty. - * Probe responses are passed to the driver as received - * frames and could be processed in software. */ - if (priv->iw_mode == IW_MODE_MONITOR) { - err = -EOPNOTSUPP; - goto out; - } - - /* Note : because we don't lock out the irq handler, the way - * we access scan variables in priv is critical. - * o scan_inprogress : not touched by irq handler - * o scan_mode : not touched by irq handler - * Before modifying anything on those variables, please think hard ! - * Jean II */ - - /* Save flags */ - priv->scan_mode = srq->flags; - - /* Always trigger scanning, even if it's in progress. - * This way, if the info frame get lost, we will recover somewhat - * gracefully - Jean II */ - - if (priv->has_hostscan) { - switch (priv->firmware_type) { - case FIRMWARE_TYPE_SYMBOL: - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFHOSTSCAN_SYMBOL, - HERMES_HOSTSCAN_SYMBOL_ONCE | - HERMES_HOSTSCAN_SYMBOL_BCAST); - break; - case FIRMWARE_TYPE_INTERSIL: { - __le16 req[3]; - - req[0] = cpu_to_le16(0x3fff); /* All channels */ - req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */ - req[2] = 0; /* Any ESSID */ - err = HERMES_WRITE_RECORD(hw, USER_BAP, - HERMES_RID_CNFHOSTSCAN, &req); - } - break; - case FIRMWARE_TYPE_AGERE: - if (priv->scan_mode & IW_SCAN_THIS_ESSID) { - struct hermes_idstring idbuf; - size_t len = min(sizeof(idbuf.val), - (size_t) si->essid_len); - idbuf.len = cpu_to_le16(len); - memcpy(idbuf.val, si->essid, len); - - err = hermes_write_ltv(hw, USER_BAP, - HERMES_RID_CNFSCANSSID_AGERE, - HERMES_BYTES_TO_RECLEN(len + 2), - &idbuf); - } else - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFSCANSSID_AGERE, - 0); /* Any ESSID */ - if (err) - break; - - if (priv->has_ext_scan) { - /* Clear scan results at the start of - * an extended scan */ - orinoco_clear_scan_results(priv, - msecs_to_jiffies(15000)); - - /* TODO: Is this available on older firmware? - * Can we use it to scan specific channels - * for IW_SCAN_THIS_FREQ? */ - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFSCANCHANNELS2GHZ, - 0x7FFF); - if (err) - goto out; - - err = hermes_inquire(hw, - HERMES_INQ_CHANNELINFO); - } else - err = hermes_inquire(hw, HERMES_INQ_SCAN); - break; - } - } else - err = hermes_inquire(hw, HERMES_INQ_SCAN); - - /* One more client */ - if (! err) - priv->scan_inprogress = 1; - - out: - orinoco_unlock(priv, &flags); - return err; -} - -#define MAX_CUSTOM_LEN 64 - -/* Translate scan data returned from the card to a card independant - * format that the Wireless Tools will understand - Jean II */ -static inline char *orinoco_translate_scan(struct net_device *dev, - struct iw_request_info *info, - char *current_ev, - char *end_buf, - union hermes_scan_info *bss, - unsigned long last_scanned) -{ - struct orinoco_private *priv = netdev_priv(dev); - u16 capabilities; - u16 channel; - struct iw_event iwe; /* Temporary buffer */ - char custom[MAX_CUSTOM_LEN]; - - memset(&iwe, 0, sizeof(iwe)); - - /* First entry *MUST* be the AP MAC address */ - iwe.cmd = SIOCGIWAP; - iwe.u.ap_addr.sa_family = ARPHRD_ETHER; - memcpy(iwe.u.ap_addr.sa_data, bss->a.bssid, ETH_ALEN); - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_ADDR_LEN); - - /* Other entries will be displayed in the order we give them */ - - /* Add the ESSID */ - iwe.u.data.length = le16_to_cpu(bss->a.essid_len); - if (iwe.u.data.length > 32) - iwe.u.data.length = 32; - iwe.cmd = SIOCGIWESSID; - iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, bss->a.essid); - - /* Add mode */ - iwe.cmd = SIOCGIWMODE; - capabilities = le16_to_cpu(bss->a.capabilities); - if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) { - if (capabilities & WLAN_CAPABILITY_ESS) - iwe.u.mode = IW_MODE_MASTER; - else - iwe.u.mode = IW_MODE_ADHOC; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_UINT_LEN); - } - - channel = bss->s.channel; - if ((channel >= 1) && (channel <= NUM_CHANNELS)) { - /* Add channel and frequency */ - iwe.cmd = SIOCGIWFREQ; - iwe.u.freq.m = channel; - iwe.u.freq.e = 0; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_FREQ_LEN); - - iwe.u.freq.m = channel_frequency[channel-1] * 100000; - iwe.u.freq.e = 1; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_FREQ_LEN); - } - - /* Add quality statistics. level and noise in dB. No link quality */ - iwe.cmd = IWEVQUAL; - iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID; - iwe.u.qual.level = (__u8) le16_to_cpu(bss->a.level) - 0x95; - iwe.u.qual.noise = (__u8) le16_to_cpu(bss->a.noise) - 0x95; - /* Wireless tools prior to 27.pre22 will show link quality - * anyway, so we provide a reasonable value. */ - if (iwe.u.qual.level > iwe.u.qual.noise) - iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise; - else - iwe.u.qual.qual = 0; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_QUAL_LEN); - - /* Add encryption capability */ - iwe.cmd = SIOCGIWENCODE; - if (capabilities & WLAN_CAPABILITY_PRIVACY) - iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; - else - iwe.u.data.flags = IW_ENCODE_DISABLED; - iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, NULL); - - /* Bit rate is not available in Lucent/Agere firmwares */ - if (priv->firmware_type != FIRMWARE_TYPE_AGERE) { - char *current_val = current_ev + iwe_stream_lcp_len(info); - int i; - int step; - - if (priv->firmware_type == FIRMWARE_TYPE_SYMBOL) - step = 2; - else - step = 1; - - iwe.cmd = SIOCGIWRATE; - /* Those two flags are ignored... */ - iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; - /* Max 10 values */ - for (i = 0; i < 10; i += step) { - /* NULL terminated */ - if (bss->p.rates[i] == 0x0) - break; - /* Bit rate given in 500 kb/s units (+ 0x80) */ - iwe.u.bitrate.value = - ((bss->p.rates[i] & 0x7f) * 500000); - current_val = iwe_stream_add_value(info, current_ev, - current_val, - end_buf, &iwe, - IW_EV_PARAM_LEN); - } - /* Check if we added any event */ - if ((current_val - current_ev) > iwe_stream_lcp_len(info)) - current_ev = current_val; - } - - /* Beacon interval */ - iwe.cmd = IWEVCUSTOM; - iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, - "bcn_int=%d", - le16_to_cpu(bss->a.beacon_interv)); - if (iwe.u.data.length) - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, custom); - - /* Capabilites */ - iwe.cmd = IWEVCUSTOM; - iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, - "capab=0x%04x", - capabilities); - if (iwe.u.data.length) - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, custom); - - /* Add EXTRA: Age to display seconds since last beacon/probe response - * for given network. */ - iwe.cmd = IWEVCUSTOM; - iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, - " Last beacon: %dms ago", - jiffies_to_msecs(jiffies - last_scanned)); - if (iwe.u.data.length) - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, custom); - - return current_ev; -} - -static inline char *orinoco_translate_ext_scan(struct net_device *dev, - struct iw_request_info *info, - char *current_ev, - char *end_buf, - struct agere_ext_scan_info *bss, - unsigned long last_scanned) -{ - u16 capabilities; - u16 channel; - struct iw_event iwe; /* Temporary buffer */ - char custom[MAX_CUSTOM_LEN]; - u8 *ie; - - memset(&iwe, 0, sizeof(iwe)); - - /* First entry *MUST* be the AP MAC address */ - iwe.cmd = SIOCGIWAP; - iwe.u.ap_addr.sa_family = ARPHRD_ETHER; - memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN); - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_ADDR_LEN); - - /* Other entries will be displayed in the order we give them */ - - /* Add the ESSID */ - ie = bss->data; - iwe.u.data.length = ie[1]; - if (iwe.u.data.length) { - if (iwe.u.data.length > 32) - iwe.u.data.length = 32; - iwe.cmd = SIOCGIWESSID; - iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, &ie[2]); - } - - /* Add mode */ - capabilities = le16_to_cpu(bss->capabilities); - if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) { - iwe.cmd = SIOCGIWMODE; - if (capabilities & WLAN_CAPABILITY_ESS) - iwe.u.mode = IW_MODE_MASTER; - else - iwe.u.mode = IW_MODE_ADHOC; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_UINT_LEN); - } - - ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_DS_PARAMS); - channel = ie ? ie[2] : 0; - if ((channel >= 1) && (channel <= NUM_CHANNELS)) { - /* Add channel and frequency */ - iwe.cmd = SIOCGIWFREQ; - iwe.u.freq.m = channel; - iwe.u.freq.e = 0; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_FREQ_LEN); - - iwe.u.freq.m = channel_frequency[channel-1] * 100000; - iwe.u.freq.e = 1; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_FREQ_LEN); - } - - /* Add quality statistics. level and noise in dB. No link quality */ - iwe.cmd = IWEVQUAL; - iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID; - iwe.u.qual.level = bss->level - 0x95; - iwe.u.qual.noise = bss->noise - 0x95; - /* Wireless tools prior to 27.pre22 will show link quality - * anyway, so we provide a reasonable value. */ - if (iwe.u.qual.level > iwe.u.qual.noise) - iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise; - else - iwe.u.qual.qual = 0; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_QUAL_LEN); - - /* Add encryption capability */ - iwe.cmd = SIOCGIWENCODE; - if (capabilities & WLAN_CAPABILITY_PRIVACY) - iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; - else - iwe.u.data.flags = IW_ENCODE_DISABLED; - iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, NULL); - - /* WPA IE */ - ie = orinoco_get_wpa_ie(bss->data, sizeof(bss->data)); - if (ie) { - iwe.cmd = IWEVGENIE; - iwe.u.data.length = ie[1] + 2; - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, ie); - } - - /* RSN IE */ - ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_RSN); - if (ie) { - iwe.cmd = IWEVGENIE; - iwe.u.data.length = ie[1] + 2; - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, ie); - } - - ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_SUPP_RATES); - if (ie) { - char *p = current_ev + iwe_stream_lcp_len(info); - int i; - - iwe.cmd = SIOCGIWRATE; - /* Those two flags are ignored... */ - iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; - - for (i = 2; i < (ie[1] + 2); i++) { - iwe.u.bitrate.value = ((ie[i] & 0x7F) * 500000); - p = iwe_stream_add_value(info, current_ev, p, end_buf, - &iwe, IW_EV_PARAM_LEN); - } - /* Check if we added any event */ - if (p > (current_ev + iwe_stream_lcp_len(info))) - current_ev = p; - } - - /* Timestamp */ - iwe.cmd = IWEVCUSTOM; - iwe.u.data.length = - snprintf(custom, MAX_CUSTOM_LEN, "tsf=%016llx", - (unsigned long long) le64_to_cpu(bss->timestamp)); - if (iwe.u.data.length) - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, custom); - - /* Beacon interval */ - iwe.cmd = IWEVCUSTOM; - iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, - "bcn_int=%d", - le16_to_cpu(bss->beacon_interval)); - if (iwe.u.data.length) - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, custom); - - /* Capabilites */ - iwe.cmd = IWEVCUSTOM; - iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, - "capab=0x%04x", - capabilities); - if (iwe.u.data.length) - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, custom); - - /* Add EXTRA: Age to display seconds since last beacon/probe response - * for given network. */ - iwe.cmd = IWEVCUSTOM; - iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, - " Last beacon: %dms ago", - jiffies_to_msecs(jiffies - last_scanned)); - if (iwe.u.data.length) - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, custom); - - return current_ev; -} - -/* Return results of a scan */ -static int orinoco_ioctl_getscan(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *srq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int err = 0; - unsigned long flags; - char *current_ev = extra; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if (priv->scan_inprogress) { - /* Important note : we don't want to block the caller - * until results are ready for various reasons. - * First, managing wait queues is complex and racy. - * Second, we grab some rtnetlink lock before comming - * here (in dev_ioctl()). - * Third, we generate an Wireless Event, so the - * caller can wait itself on that - Jean II */ - err = -EAGAIN; - goto out; - } - - if (priv->has_ext_scan) { - struct xbss_element *bss; - - list_for_each_entry(bss, &priv->bss_list, list) { - /* Translate this entry to WE format */ - current_ev = - orinoco_translate_ext_scan(dev, info, - current_ev, - extra + srq->length, - &bss->bss, - bss->last_scanned); - - /* Check if there is space for one more entry */ - if ((extra + srq->length - current_ev) - <= IW_EV_ADDR_LEN) { - /* Ask user space to try again with a - * bigger buffer */ - err = -E2BIG; - goto out; - } - } - - } else { - struct bss_element *bss; - - list_for_each_entry(bss, &priv->bss_list, list) { - /* Translate this entry to WE format */ - current_ev = orinoco_translate_scan(dev, info, - current_ev, - extra + srq->length, - &bss->bss, - bss->last_scanned); - - /* Check if there is space for one more entry */ - if ((extra + srq->length - current_ev) - <= IW_EV_ADDR_LEN) { - /* Ask user space to try again with a - * bigger buffer */ - err = -E2BIG; - goto out; - } - } - } - - srq->length = (current_ev - extra); - srq->flags = (__u16) priv->scan_mode; - -out: - orinoco_unlock(priv, &flags); - return err; -} - -/* Commit handler, called after set operations */ -static int orinoco_ioctl_commit(struct net_device *dev, - struct iw_request_info *info, - void *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct hermes *hw = &priv->hw; - unsigned long flags; - int err = 0; - - if (!priv->open) - return 0; - - if (priv->broken_disableport) { - orinoco_reset(&priv->reset_work); - return 0; - } - - if (orinoco_lock(priv, &flags) != 0) - return err; - - err = hermes_disable_port(hw, 0); - if (err) { - printk(KERN_WARNING "%s: Unable to disable port " - "while reconfiguring card\n", dev->name); - priv->broken_disableport = 1; - goto out; - } - - err = __orinoco_program_rids(dev); - if (err) { - printk(KERN_WARNING "%s: Unable to reconfigure card\n", - dev->name); - goto out; - } - - err = hermes_enable_port(hw, 0); - if (err) { - printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n", - dev->name); - goto out; - } - - out: - if (err) { - printk(KERN_WARNING "%s: Resetting instead...\n", dev->name); - schedule_work(&priv->reset_work); - err = 0; - } - - orinoco_unlock(priv, &flags); - return err; -} - -static const struct iw_priv_args orinoco_privtab[] = { - { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" }, - { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" }, - { SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - 0, "set_port3" }, - { SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "get_port3" }, - { SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - 0, "set_preamble" }, - { SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "get_preamble" }, - { SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - 0, "set_ibssport" }, - { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "get_ibssport" }, - { SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN, - "get_rid" }, -}; - - -/* - * Structures to export the Wireless Handlers - */ - -#define STD_IW_HANDLER(id, func) \ - [IW_IOCTL_IDX(id)] = (iw_handler) func -static const iw_handler orinoco_handler[] = { - STD_IW_HANDLER(SIOCSIWCOMMIT, orinoco_ioctl_commit), - STD_IW_HANDLER(SIOCGIWNAME, orinoco_ioctl_getname), - STD_IW_HANDLER(SIOCSIWFREQ, orinoco_ioctl_setfreq), - STD_IW_HANDLER(SIOCGIWFREQ, orinoco_ioctl_getfreq), - STD_IW_HANDLER(SIOCSIWMODE, orinoco_ioctl_setmode), - STD_IW_HANDLER(SIOCGIWMODE, orinoco_ioctl_getmode), - STD_IW_HANDLER(SIOCSIWSENS, orinoco_ioctl_setsens), - STD_IW_HANDLER(SIOCGIWSENS, orinoco_ioctl_getsens), - STD_IW_HANDLER(SIOCGIWRANGE, orinoco_ioctl_getiwrange), - STD_IW_HANDLER(SIOCSIWSPY, iw_handler_set_spy), - STD_IW_HANDLER(SIOCGIWSPY, iw_handler_get_spy), - STD_IW_HANDLER(SIOCSIWTHRSPY, iw_handler_set_thrspy), - STD_IW_HANDLER(SIOCGIWTHRSPY, iw_handler_get_thrspy), - STD_IW_HANDLER(SIOCSIWAP, orinoco_ioctl_setwap), - STD_IW_HANDLER(SIOCGIWAP, orinoco_ioctl_getwap), - STD_IW_HANDLER(SIOCSIWSCAN, orinoco_ioctl_setscan), - STD_IW_HANDLER(SIOCGIWSCAN, orinoco_ioctl_getscan), - STD_IW_HANDLER(SIOCSIWESSID, orinoco_ioctl_setessid), - STD_IW_HANDLER(SIOCGIWESSID, orinoco_ioctl_getessid), - STD_IW_HANDLER(SIOCSIWNICKN, orinoco_ioctl_setnick), - STD_IW_HANDLER(SIOCGIWNICKN, orinoco_ioctl_getnick), - STD_IW_HANDLER(SIOCSIWRATE, orinoco_ioctl_setrate), - STD_IW_HANDLER(SIOCGIWRATE, orinoco_ioctl_getrate), - STD_IW_HANDLER(SIOCSIWRTS, orinoco_ioctl_setrts), - STD_IW_HANDLER(SIOCGIWRTS, orinoco_ioctl_getrts), - STD_IW_HANDLER(SIOCSIWFRAG, orinoco_ioctl_setfrag), - STD_IW_HANDLER(SIOCGIWFRAG, orinoco_ioctl_getfrag), - STD_IW_HANDLER(SIOCGIWRETRY, orinoco_ioctl_getretry), - STD_IW_HANDLER(SIOCSIWENCODE, orinoco_ioctl_setiwencode), - STD_IW_HANDLER(SIOCGIWENCODE, orinoco_ioctl_getiwencode), - STD_IW_HANDLER(SIOCSIWPOWER, orinoco_ioctl_setpower), - STD_IW_HANDLER(SIOCGIWPOWER, orinoco_ioctl_getpower), - STD_IW_HANDLER(SIOCSIWGENIE, orinoco_ioctl_set_genie), - STD_IW_HANDLER(SIOCGIWGENIE, orinoco_ioctl_get_genie), - STD_IW_HANDLER(SIOCSIWMLME, orinoco_ioctl_set_mlme), - STD_IW_HANDLER(SIOCSIWAUTH, orinoco_ioctl_set_auth), - STD_IW_HANDLER(SIOCGIWAUTH, orinoco_ioctl_get_auth), - STD_IW_HANDLER(SIOCSIWENCODEEXT, orinoco_ioctl_set_encodeext), - STD_IW_HANDLER(SIOCGIWENCODEEXT, orinoco_ioctl_get_encodeext), -}; - - -/* - Added typecasting since we no longer use iwreq_data -- Moustafa - */ -static const iw_handler orinoco_private_handler[] = { - [0] = (iw_handler) orinoco_ioctl_reset, - [1] = (iw_handler) orinoco_ioctl_reset, - [2] = (iw_handler) orinoco_ioctl_setport3, - [3] = (iw_handler) orinoco_ioctl_getport3, - [4] = (iw_handler) orinoco_ioctl_setpreamble, - [5] = (iw_handler) orinoco_ioctl_getpreamble, - [6] = (iw_handler) orinoco_ioctl_setibssport, - [7] = (iw_handler) orinoco_ioctl_getibssport, - [9] = (iw_handler) orinoco_ioctl_getrid, -}; - -static const struct iw_handler_def orinoco_handler_def = { - .num_standard = ARRAY_SIZE(orinoco_handler), - .num_private = ARRAY_SIZE(orinoco_private_handler), - .num_private_args = ARRAY_SIZE(orinoco_privtab), - .standard = orinoco_handler, - .private = orinoco_private_handler, - .private_args = orinoco_privtab, - .get_wireless_stats = orinoco_get_wireless_stats, -}; - -static void orinoco_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - struct orinoco_private *priv = netdev_priv(dev); - - strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1); - strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1); - strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1); - if (dev->dev.parent) - strncpy(info->bus_info, dev_name(dev->dev.parent), - sizeof(info->bus_info) - 1); - else - snprintf(info->bus_info, sizeof(info->bus_info) - 1, - "PCMCIA %p", priv->hw.iobase); -} - -static const struct ethtool_ops orinoco_ethtool_ops = { - .get_drvinfo = orinoco_get_drvinfo, - .get_link = ethtool_op_get_link, -}; - -/********************************************************************/ -/* Module initialization */ -/********************************************************************/ - -EXPORT_SYMBOL(alloc_orinocodev); -EXPORT_SYMBOL(free_orinocodev); - -EXPORT_SYMBOL(__orinoco_up); -EXPORT_SYMBOL(__orinoco_down); -EXPORT_SYMBOL(orinoco_reinit_firmware); - -EXPORT_SYMBOL(orinoco_interrupt); - -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (David Gibson <hermes@gibson.dropbear.id.au>, " - "Pavel Roskin <proski@gnu.org>, et al)"; - -static int __init init_orinoco(void) -{ - printk(KERN_DEBUG "%s\n", version); - return 0; -} - -static void __exit exit_orinoco(void) -{ -} - -module_init(init_orinoco); -module_exit(exit_orinoco); diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h index 00750c8ba7d..eebd2be21ee 100644 --- a/drivers/net/wireless/orinoco/orinoco.h +++ b/drivers/net/wireless/orinoco/orinoco.h @@ -1,5 +1,5 @@ /* orinoco.h - * + * * Common definitions to all pieces of the various orinoco * drivers */ @@ -14,23 +14,25 @@ #include <linux/netdevice.h> #include <linux/wireless.h> #include <net/iw_handler.h> +#include <net/cfg80211.h> #include "hermes.h" /* To enable debug messages */ -//#define ORINOCO_DEBUG 3 +/*#define ORINOCO_DEBUG 3*/ -#define WIRELESS_SPY // enable iwspy support +#define WIRELESS_SPY /* enable iwspy support */ #define MAX_SCAN_LEN 4096 +#define ORINOCO_SEQ_LEN 8 #define ORINOCO_MAX_KEY_SIZE 14 #define ORINOCO_MAX_KEYS 4 struct orinoco_key { __le16 len; /* always stored as little-endian */ char data[ORINOCO_MAX_KEY_SIZE]; -} __attribute__ ((packed)); +} __packed; #define TKIP_KEYLEN 16 #define MIC_KEYLEN 8 @@ -41,30 +43,16 @@ struct orinoco_tkip_key { u8 rx_mic[MIC_KEYLEN]; }; -typedef enum { +enum orinoco_alg { + ORINOCO_ALG_NONE, + ORINOCO_ALG_WEP, + ORINOCO_ALG_TKIP +}; + +enum fwtype { FIRMWARE_TYPE_AGERE, FIRMWARE_TYPE_INTERSIL, FIRMWARE_TYPE_SYMBOL -} fwtype_t; - -struct bss_element { - union hermes_scan_info bss; - unsigned long last_scanned; - struct list_head list; -}; - -struct xbss_element { - struct agere_ext_scan_info bss; - unsigned long last_scanned; - struct list_head list; -}; - -struct hermes_rx_descriptor; - -struct orinoco_rx_data { - struct hermes_rx_descriptor *desc; - struct sk_buff *skb; - struct list_head list; }; struct firmware; @@ -75,6 +63,10 @@ struct orinoco_private { int (*hard_reset)(struct orinoco_private *); int (*stop_fw)(struct orinoco_private *, int); + struct ieee80211_supported_band band; + struct ieee80211_channel channels[14]; + u32 cipher_suites[3]; + /* Synchronisation stuff */ spinlock_t lock; int hw_unavailable; @@ -83,7 +75,6 @@ struct orinoco_private { /* Interrupt tasklets */ struct tasklet_struct rx_tasklet; struct list_head rx_list; - struct orinoco_rx_data *rx_data; /* driver state */ int open; @@ -97,12 +88,11 @@ struct orinoco_private { struct iw_statistics wstats; /* Hardware control variables */ - hermes_t hw; + struct hermes hw; u16 txfid; /* Capabilities of the hardware/firmware */ - fwtype_t firmware_type; - char fw_name[32]; + enum fwtype firmware_type; int ibss_port; int nicbuf_size; u16 channel_mask; @@ -123,15 +113,17 @@ struct orinoco_private { unsigned int do_fw_download:1; unsigned int broken_disableport:1; unsigned int broken_monitor:1; + unsigned int prefer_port3:1; /* Configuration paramaters */ - u32 iw_mode; - int prefer_port3; - u16 encode_alg, wep_restrict, tx_key; - struct orinoco_key keys[ORINOCO_MAX_KEYS]; + enum nl80211_iftype iw_mode; + enum orinoco_alg encode_alg; + u16 wep_restrict, tx_key; + struct key_params keys[ORINOCO_MAX_KEYS]; + int bitratemode; - char nick[IW_ESSID_MAX_SIZE+1]; - char desired_essid[IW_ESSID_MAX_SIZE+1]; + char nick[IW_ESSID_MAX_SIZE + 1]; + char desired_essid[IW_ESSID_MAX_SIZE + 1]; char desired_bssid[ETH_ALEN]; int bssid_fixed; u16 frag_thresh, mwo_robust; @@ -139,8 +131,10 @@ struct orinoco_private { u16 ap_density, rts_thresh; u16 pm_on, pm_mcast, pm_period, pm_timeout; u16 preamble; + u16 short_retry_limit, long_retry_limit; + u16 retry_lifetime; #ifdef WIRELESS_SPY - struct iw_spy_data spy_data; /* iwspy support */ + struct iw_spy_data spy_data; /* iwspy support */ struct iw_public_data wireless_data; #endif @@ -149,18 +143,15 @@ struct orinoco_private { int promiscuous, mc_count; /* Scanning support */ - struct list_head bss_list; - struct list_head bss_free_list; - void *bss_xbss_data; - - int scan_inprogress; /* Scan pending... */ - u32 scan_mode; /* Type of scan done */ + struct cfg80211_scan_request *scan_request; + struct work_struct process_scan; + struct list_head scan_list; + spinlock_t scan_lock; /* protects the scan list */ /* WPA support */ u8 *wpa_ie; int wpa_ie_len; - struct orinoco_tkip_key tkip_key[ORINOCO_MAX_KEYS]; struct crypto_hash *rx_tfm_mic; struct crypto_hash *tx_tfm_mic; @@ -168,16 +159,21 @@ struct orinoco_private { unsigned int tkip_cm_active:1; unsigned int key_mgmt:3; +#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) /* Cached in memory firmware to use during ->resume. */ const struct firmware *cached_pri_fw; const struct firmware *cached_fw; +#endif struct notifier_block pm_notifier; }; #ifdef ORINOCO_DEBUG extern int orinoco_debug; -#define DEBUG(n, args...) do { if (orinoco_debug>(n)) printk(KERN_DEBUG args); } while(0) +#define DEBUG(n, args...) do { \ + if (orinoco_debug > (n)) \ + printk(KERN_DEBUG args); \ +} while (0) #else #define DEBUG(n, args...) do { } while (0) #endif /* ORINOCO_DEBUG */ @@ -186,15 +182,34 @@ extern int orinoco_debug; /* Exported prototypes */ /********************************************************************/ -extern struct net_device *alloc_orinocodev( - int sizeof_card, struct device *device, - int (*hard_reset)(struct orinoco_private *), - int (*stop_fw)(struct orinoco_private *, int)); -extern void free_orinocodev(struct net_device *dev); -extern int __orinoco_up(struct net_device *dev); -extern int __orinoco_down(struct net_device *dev); -extern int orinoco_reinit_firmware(struct net_device *dev); -extern irqreturn_t orinoco_interrupt(int irq, void * dev_id); +struct orinoco_private *alloc_orinocodev(int sizeof_card, struct device *device, + int (*hard_reset)(struct orinoco_private *), + int (*stop_fw)(struct orinoco_private *, int)); +void free_orinocodev(struct orinoco_private *priv); +int orinoco_init(struct orinoco_private *priv); +int orinoco_if_add(struct orinoco_private *priv, unsigned long base_addr, + unsigned int irq, const struct net_device_ops *ops); +void orinoco_if_del(struct orinoco_private *priv); +int orinoco_up(struct orinoco_private *priv); +void orinoco_down(struct orinoco_private *priv); +irqreturn_t orinoco_interrupt(int irq, void *dev_id); + +void __orinoco_ev_info(struct net_device *dev, struct hermes *hw); +void __orinoco_ev_rx(struct net_device *dev, struct hermes *hw); + +int orinoco_process_xmit_skb(struct sk_buff *skb, + struct net_device *dev, + struct orinoco_private *priv, + int *tx_control, + u8 *mic); + +/* Common ndo functions exported for reuse by orinoco_usb */ +int orinoco_open(struct net_device *dev); +int orinoco_stop(struct net_device *dev); +struct net_device_stats *orinoco_get_stats(struct net_device *dev); +void orinoco_set_multicast_list(struct net_device *dev); +int orinoco_change_mtu(struct net_device *dev, int new_mtu); +void orinoco_tx_timeout(struct net_device *dev); /********************************************************************/ /* Locking and synchronization functions */ @@ -203,11 +218,11 @@ extern irqreturn_t orinoco_interrupt(int irq, void * dev_id); static inline int orinoco_lock(struct orinoco_private *priv, unsigned long *flags) { - spin_lock_irqsave(&priv->lock, *flags); + priv->hw.ops->lock_irqsave(&priv->lock, flags); if (priv->hw_unavailable) { DEBUG(1, "orinoco_lock() called with hw_unavailable (dev=%p)\n", priv->ndev); - spin_unlock_irqrestore(&priv->lock, *flags); + priv->hw.ops->unlock_irqrestore(&priv->lock, flags); return -EBUSY; } return 0; @@ -216,7 +231,23 @@ static inline int orinoco_lock(struct orinoco_private *priv, static inline void orinoco_unlock(struct orinoco_private *priv, unsigned long *flags) { - spin_unlock_irqrestore(&priv->lock, *flags); + priv->hw.ops->unlock_irqrestore(&priv->lock, flags); +} + +static inline void orinoco_lock_irq(struct orinoco_private *priv) +{ + priv->hw.ops->lock_irq(&priv->lock); } +static inline void orinoco_unlock_irq(struct orinoco_private *priv) +{ + priv->hw.ops->unlock_irq(&priv->lock); +} + +/*** Navigate from net_device to orinoco_private ***/ +static inline struct orinoco_private *ndev_priv(struct net_device *dev) +{ + struct wireless_dev *wdev = netdev_priv(dev); + return wdev_priv(wdev); +} #endif /* _ORINOCO_H */ diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 0b32215d3f5..c0a27377d9e 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -6,8 +6,8 @@ * It should also be usable on various Prism II based cards such as the * Linksys, D-Link and Farallon Skyline. It should also work on Symbol * cards such as the 3Com AirConnect and Ericsson WLAN. - * - * Copyright notice & release notes in file orinoco.c + * + * Copyright notice & release notes in file main.c */ #define DRIVER_NAME "orinoco_cs" @@ -15,10 +15,7 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/delay.h> -#include <pcmcia/cs_types.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -30,7 +27,8 @@ /********************************************************************/ MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>"); -MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards"); +MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco," + " Prism II based and similar wireless cards"); MODULE_LICENSE("Dual MPL/GPL"); /* Module parameters */ @@ -49,12 +47,11 @@ MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket * struct orinoco_private */ struct orinoco_pccard { struct pcmcia_device *p_dev; - dev_node_t node; /* Used to handle hard reset */ /* yuck, we need this hack to work around the insanity of the - * PCMCIA layer */ - unsigned long hard_reset_in_progress; + * PCMCIA layer */ + unsigned long hard_reset_in_progress; }; @@ -67,7 +64,7 @@ static void orinoco_cs_release(struct pcmcia_device *link); static void orinoco_cs_detach(struct pcmcia_device *p_dev); /********************************************************************/ -/* Device methods */ +/* Device methods */ /********************************************************************/ static int @@ -91,257 +88,117 @@ orinoco_cs_hard_reset(struct orinoco_private *priv) } /********************************************************************/ -/* PCMCIA stuff */ +/* PCMCIA stuff */ /********************************************************************/ -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. */ static int orinoco_cs_probe(struct pcmcia_device *link) { - struct net_device *dev; struct orinoco_private *priv; struct orinoco_pccard *card; - dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link), - orinoco_cs_hard_reset, NULL); - if (! dev) + priv = alloc_orinocodev(sizeof(*card), &link->dev, + orinoco_cs_hard_reset, NULL); + if (!priv) return -ENOMEM; - priv = netdev_priv(dev); card = priv->card; /* Link both structures together */ card->p_dev = link; - link->priv = dev; - - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; - link->irq.IRQInfo1 = IRQ_LEVEL_ID; - link->irq.Handler = orinoco_interrupt; - link->irq.Instance = dev; - - /* General socket configuration defaults can go here. In this - * client, we assume very little, and rely on the CIS for - * almost everything. In most clients, many details (i.e., - * number, sizes, and attributes of IO windows) are fixed by - * the nature of the device, and can be hard-wired here. */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; + link->priv = priv; return orinoco_cs_config(link); } /* orinoco_cs_attach */ -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void orinoco_cs_detach(struct pcmcia_device *link) { - struct net_device *dev = link->priv; + struct orinoco_private *priv = link->priv; - if (link->dev_node) - unregister_netdev(dev); + orinoco_if_del(priv); orinoco_cs_release(link); - free_orinocodev(dev); + free_orinocodev(priv); } /* orinoco_cs_detach */ -/* - * orinoco_cs_config() is scheduled to run after a CARD_INSERTION - * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. - */ - -#define CS_CHECK(fn, ret) do { \ - last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \ - } while (0) - -static int orinoco_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - goto next_entry; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) - goto next_entry; - } - return 0; + if (p_dev->config_index == 0) + return -EINVAL; -next_entry: - pcmcia_disable_device(p_dev); - return -ENODEV; + return pcmcia_request_io(p_dev); }; static int orinoco_cs_config(struct pcmcia_device *link) { - struct net_device *dev = link->priv; - struct orinoco_private *priv = netdev_priv(dev); - struct orinoco_pccard *card = priv->card; - hermes_t *hw = &priv->hw; - int last_fn, last_ret; + struct orinoco_private *priv = link->priv; + struct hermes *hw = &priv->hw; + int ret; void __iomem *mem; - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ - last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); - if (last_ret) { + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; + ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); + if (ret) { if (!ignore_cis_vcc) printk(KERN_ERR PFX "GetNextTuple(): No matching " "CIS configuration. Maybe you need the " "ignore_cis_vcc=1 parameter.\n"); - cs_error(link, RequestIO, last_ret); goto failed; } - /* - * Allocate an interrupt line. Note that this does not assign - * a handler to the interrupt, unless the 'Handler' member of - * the irq structure is initialized. - */ - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + mem = ioport_map(link->resource[0]->start, + resource_size(link->resource[0])); + if (!mem) + goto failed; /* We initialize the hermes structure before completing PCMCIA * configuration just in case the interrupt handler gets * called. */ - mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); - if (!mem) - goto cs_failed; - hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - CS_CHECK(RequestConfiguration, - pcmcia_request_configuration(link, &link->conf)); - - /* Ok, we have the configuration, prepare to register the netdev */ - dev->base_addr = link->io.BasePort1; - dev->irq = link->irq.AssignedIRQ; - card->node.major = card->node.minor = 0; - - SET_NETDEV_DEV(dev, &handle_to_dev(link)); - /* Tell the stack we exist */ - if (register_netdev(dev) != 0) { - printk(KERN_ERR PFX "register_netdev() failed\n"); + ret = pcmcia_request_irq(link, orinoco_interrupt); + if (ret) + goto failed; + + ret = pcmcia_enable_device(link); + if (ret) + goto failed; + + /* Initialise the main driver */ + if (orinoco_init(priv) != 0) { + printk(KERN_ERR PFX "orinoco_init() failed\n"); goto failed; } - /* At this point, the dev_node_t structure(s) needs to be - * initialized and arranged in a linked list at link->dev_node. */ - strcpy(card->node.dev_name, dev->name); - link->dev_node = &card->node; /* link->dev_node being non-NULL is also - used to indicate that the - net_device has been registered */ - - /* Finally, report what we've done */ - printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io " - "0x%04x-0x%04x\n", dev->name, dev_name(dev->dev.parent), - link->irq.AssignedIRQ, link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 - 1); - return 0; + /* Register an interface with the stack */ + if (orinoco_if_add(priv, link->resource[0]->start, + link->irq, NULL) != 0) { + printk(KERN_ERR PFX "orinoco_if_add() failed\n"); + goto failed; + } - cs_failed: - cs_error(link, last_fn, last_ret); + return 0; failed: orinoco_cs_release(link); return -ENODEV; } /* orinoco_cs_config */ -/* - * After a card is removed, orinoco_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void orinoco_cs_release(struct pcmcia_device *link) { - struct net_device *dev = link->priv; - struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_private *priv = link->priv; unsigned long flags; /* We're committed to taking the device away now, so mark the * hardware as unavailable */ - spin_lock_irqsave(&priv->lock, flags); + priv->hw.ops->lock_irqsave(&priv->lock, &flags); priv->hw_unavailable++; - spin_unlock_irqrestore(&priv->lock, flags); + priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); pcmcia_disable_device(link); if (priv->hw.iobase) @@ -350,62 +207,26 @@ orinoco_cs_release(struct pcmcia_device *link) static int orinoco_cs_suspend(struct pcmcia_device *link) { - struct net_device *dev = link->priv; - struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_private *priv = link->priv; struct orinoco_pccard *card = priv->card; - int err = 0; - unsigned long flags; /* This is probably racy, but I can't think of a better way, short of rewriting the PCMCIA layer to not suck :-( */ - if (! test_bit(0, &card->hard_reset_in_progress)) { - spin_lock_irqsave(&priv->lock, flags); - - err = __orinoco_down(dev); - if (err) - printk(KERN_WARNING "%s: Error %d downing interface\n", - dev->name, err); - - netif_device_detach(dev); - priv->hw_unavailable++; - - spin_unlock_irqrestore(&priv->lock, flags); - } + if (!test_bit(0, &card->hard_reset_in_progress)) + orinoco_down(priv); return 0; } static int orinoco_cs_resume(struct pcmcia_device *link) { - struct net_device *dev = link->priv; - struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_private *priv = link->priv; struct orinoco_pccard *card = priv->card; int err = 0; - unsigned long flags; - if (! test_bit(0, &card->hard_reset_in_progress)) { - err = orinoco_reinit_firmware(dev); - if (err) { - printk(KERN_ERR "%s: Error %d re-initializing firmware\n", - dev->name, err); - return -EIO; - } - - spin_lock_irqsave(&priv->lock, flags); - - netif_device_attach(dev); - priv->hw_unavailable--; - - if (priv->open && ! priv->hw_unavailable) { - err = __orinoco_up(dev); - if (err) - printk(KERN_ERR "%s: Error %d restarting card\n", - dev->name, err); - } - - spin_unlock_irqrestore(&priv->lock, flags); - } + if (!test_bit(0, &card->hard_reset_in_progress)) + err = orinoco_up(priv); return err; } @@ -415,124 +236,105 @@ static int orinoco_cs_resume(struct pcmcia_device *link) /* Module initialization */ /********************************************************************/ -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (David Gibson <hermes@gibson.dropbear.id.au>, " - "Pavel Roskin <proski@gnu.org>, et al)"; - -static struct pcmcia_device_id orinoco_cs_ids[] = { - PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */ - PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */ - PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */ +static const struct pcmcia_device_id orinoco_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */ - PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */ - PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */ - PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */ PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */ PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */ - PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */ - PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */ PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */ PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */ PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0003), /* ARtem Onair Comcard 11 */ PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */ - PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */ - PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */ - PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */ - PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */ PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */ PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */ PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */ PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */ + PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3), + PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f), + PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e), + PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842), + PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169), + PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb), + PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90), + PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916), + PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3), + PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c), + PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077), + PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92), + PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a), + PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410), + PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3), + PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a), + PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767), + PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed), + PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9), + PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26), + PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b), + PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e), + PCMCIA_DEVICE_MANF_CARD_PROD_ID3(0x0156, 0x0002, "Version 01.01", 0xd27deb1a), /* Lucent Orinoco */ +#ifdef CONFIG_HERMES_PRISM + /* Only entries that certainly identify Prism chipset */ + PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */ + PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */ + PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */ + PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */ + PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */ + PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */ + PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */ + PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */ + PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */ PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */ PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */ PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */ PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */ PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */ PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */ - PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9), - PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3), + PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0), PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5), PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2), - PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092), - PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f), - PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842), - PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e), - PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169), - PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb), - PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3), PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18), - PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90), + PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3), PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b), - PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9), PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae), + PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146), PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac), PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab), - PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916), - PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146), - PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3), - PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c), - PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0), - PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077), + PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9), PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18), PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77), PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf), - PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2), - PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92), PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395), - PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a), - PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410), - PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3), PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01), - PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a), - PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1), PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1), - PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767), + PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1), PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6), - PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed), - PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39), PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264), PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178), - PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9), - PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26), - PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b), PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757), PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a), - PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e), - PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39), PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee), + PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092), + PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2), + PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b), + PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39), + + /* This may be Agere or Intersil Firmware */ + PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), +#endif PCMCIA_DEVICE_NULL, }; MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids); static struct pcmcia_driver orinoco_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = orinoco_cs_probe, .remove = orinoco_cs_detach, .id_table = orinoco_cs_ids, .suspend = orinoco_cs_suspend, .resume = orinoco_cs_resume, }; - -static int __init -init_orinoco_cs(void) -{ - printk(KERN_DEBUG "%s\n", version); - - return pcmcia_register_driver(&orinoco_driver); -} - -static void __exit -exit_orinoco_cs(void) -{ - pcmcia_unregister_driver(&orinoco_driver); -} - -module_init(init_orinoco_cs); -module_exit(exit_orinoco_cs); +module_pcmcia_driver(orinoco_driver); diff --git a/drivers/net/wireless/orinoco/orinoco_nortel.c b/drivers/net/wireless/orinoco/orinoco_nortel.c index 2fc86596302..ffb2469eb67 100644 --- a/drivers/net/wireless/orinoco/orinoco_nortel.c +++ b/drivers/net/wireless/orinoco/orinoco_nortel.c @@ -9,12 +9,12 @@ * * Some of this code is borrowed from orinoco_plx.c * Copyright (C) 2001 Daniel Barlow - * Some of this code is borrowed from orinoco_pci.c + * Some of this code is borrowed from orinoco_pci.c * Copyright (C) 2001 Jean Tourrilhes * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing * has been copied from it. linux-wlan-ng-0.1.10 is originally : * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. - * + * * The contents of this file are subject to the Mozilla Public License * Version 1.1 (the "License"); you may not use this file except in * compliance with the License. You may obtain a copy of the License @@ -103,9 +103,8 @@ static int orinoco_nortel_hw_init(struct orinoco_pci_card *card) iowrite16(0x8, card->bridge_io + 2); for (i = 0; i < 30; i++) { mdelay(30); - if (ioread16(card->bridge_io) & 0x10) { + if (ioread16(card->bridge_io) & 0x10) break; - } } if (i == 30) { printk(KERN_ERR PFX "brg1 timed out\n"); @@ -145,7 +144,6 @@ static int orinoco_nortel_init_one(struct pci_dev *pdev, int err; struct orinoco_private *priv; struct orinoco_pci_card *card; - struct net_device *dev; void __iomem *hermes_io, *bridge_io, *attr_io; err = pci_enable_device(pdev); @@ -182,24 +180,22 @@ static int orinoco_nortel_init_one(struct pci_dev *pdev, } /* Allocate network device */ - dev = alloc_orinocodev(sizeof(*card), &pdev->dev, - orinoco_nortel_cor_reset, NULL); - if (!dev) { + priv = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_nortel_cor_reset, NULL); + if (!priv) { printk(KERN_ERR PFX "Cannot allocate network device\n"); err = -ENOMEM; goto fail_alloc; } - priv = netdev_priv(dev); card = priv->card; card->bridge_io = bridge_io; card->attr_io = attr_io; - SET_NETDEV_DEV(dev, &pdev->dev); hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, - dev->name, dev); + DRIVER_NAME, priv); if (err) { printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); err = -EBUSY; @@ -218,24 +214,27 @@ static int orinoco_nortel_init_one(struct pci_dev *pdev, goto fail; } - err = register_netdev(dev); + err = orinoco_init(priv); + if (err) { + printk(KERN_ERR PFX "orinoco_init() failed\n"); + goto fail; + } + + err = orinoco_if_add(priv, 0, 0, NULL); if (err) { - printk(KERN_ERR PFX "Cannot register network device\n"); + printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto fail; } - pci_set_drvdata(pdev, dev); - printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name, - pci_name(pdev)); + pci_set_drvdata(pdev, priv); return 0; fail: - free_irq(pdev->irq, dev); + free_irq(pdev->irq, priv); fail_irq: - pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); + free_orinocodev(priv); fail_alloc: pci_iounmap(pdev, hermes_io); @@ -255,19 +254,17 @@ static int orinoco_nortel_init_one(struct pci_dev *pdev, return err; } -static void __devexit orinoco_nortel_remove_one(struct pci_dev *pdev) +static void orinoco_nortel_remove_one(struct pci_dev *pdev) { - struct net_device *dev = pci_get_drvdata(pdev); - struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_private *priv = pci_get_drvdata(pdev); struct orinoco_pci_card *card = priv->card; /* Clear LEDs */ iowrite16(0, card->bridge_io + 10); - unregister_netdev(dev); - free_irq(pdev->irq, dev); - pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); + orinoco_if_del(priv); + free_irq(pdev->irq, priv); + free_orinocodev(priv); pci_iounmap(pdev, priv->hw.iobase); pci_iounmap(pdev, card->attr_io); pci_iounmap(pdev, card->bridge_io); @@ -275,7 +272,7 @@ static void __devexit orinoco_nortel_remove_one(struct pci_dev *pdev) pci_disable_device(pdev); } -static struct pci_device_id orinoco_nortel_id_table[] = { +static DEFINE_PCI_DEVICE_TABLE(orinoco_nortel_id_table) = { /* Nortel emobility PCI */ {0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,}, /* Symbol LA-4123 PCI */ @@ -289,7 +286,7 @@ static struct pci_driver orinoco_nortel_driver = { .name = DRIVER_NAME, .id_table = orinoco_nortel_id_table, .probe = orinoco_nortel_init_one, - .remove = __devexit_p(orinoco_nortel_remove_one), + .remove = orinoco_nortel_remove_one, .suspend = orinoco_pci_suspend, .resume = orinoco_pci_resume, }; @@ -297,8 +294,7 @@ static struct pci_driver orinoco_nortel_driver = { static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION " (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)"; MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>"); -MODULE_DESCRIPTION - ("Driver for wireless LAN cards using the Nortel PCI bridge"); +MODULE_DESCRIPTION("Driver for wireless LAN cards using the Nortel PCI bridge"); MODULE_LICENSE("Dual MPL/GPL"); static int __init orinoco_nortel_init(void) diff --git a/drivers/net/wireless/orinoco/orinoco_pci.c b/drivers/net/wireless/orinoco/orinoco_pci.c index 4ebd638a073..5ae1191d253 100644 --- a/drivers/net/wireless/orinoco/orinoco_pci.c +++ b/drivers/net/wireless/orinoco/orinoco_pci.c @@ -1,12 +1,12 @@ /* orinoco_pci.c - * + * * Driver for Prism 2.5/3 devices that have a direct PCI interface * (i.e. these are not PCMCIA cards in a PCMCIA-to-PCI bridge). * The card contains only one PCI region, which contains all the usual * hermes registers, as well as the COR register. * * Current maintainers are: - * Pavel Roskin <proski AT gnu.org> + * Pavel Roskin <proski AT gnu.org> * and David Gibson <hermes AT gibson.dropbear.id.au> * * Some of this code is borrowed from orinoco_plx.c @@ -81,7 +81,7 @@ */ static int orinoco_pci_cor_reset(struct orinoco_private *priv) { - hermes_t *hw = &priv->hw; + struct hermes *hw = &priv->hw; unsigned long timeout; u16 reg; @@ -116,7 +116,6 @@ static int orinoco_pci_init_one(struct pci_dev *pdev, int err; struct orinoco_private *priv; struct orinoco_pci_card *card; - struct net_device *dev; void __iomem *hermes_io; err = pci_enable_device(pdev); @@ -139,22 +138,20 @@ static int orinoco_pci_init_one(struct pci_dev *pdev, } /* Allocate network device */ - dev = alloc_orinocodev(sizeof(*card), &pdev->dev, - orinoco_pci_cor_reset, NULL); - if (!dev) { + priv = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_pci_cor_reset, NULL); + if (!priv) { printk(KERN_ERR PFX "Cannot allocate network device\n"); err = -ENOMEM; goto fail_alloc; } - priv = netdev_priv(dev); card = priv->card; - SET_NETDEV_DEV(dev, &pdev->dev); hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING); err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, - dev->name, dev); + DRIVER_NAME, priv); if (err) { printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); err = -EBUSY; @@ -167,24 +164,27 @@ static int orinoco_pci_init_one(struct pci_dev *pdev, goto fail; } - err = register_netdev(dev); + err = orinoco_init(priv); + if (err) { + printk(KERN_ERR PFX "orinoco_init() failed\n"); + goto fail; + } + + err = orinoco_if_add(priv, 0, 0, NULL); if (err) { - printk(KERN_ERR PFX "Cannot register network device\n"); + printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto fail; } - pci_set_drvdata(pdev, dev); - printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name, - pci_name(pdev)); + pci_set_drvdata(pdev, priv); return 0; fail: - free_irq(pdev->irq, dev); + free_irq(pdev->irq, priv); fail_irq: - pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); + free_orinocodev(priv); fail_alloc: pci_iounmap(pdev, hermes_io); @@ -198,21 +198,19 @@ static int orinoco_pci_init_one(struct pci_dev *pdev, return err; } -static void __devexit orinoco_pci_remove_one(struct pci_dev *pdev) +static void orinoco_pci_remove_one(struct pci_dev *pdev) { - struct net_device *dev = pci_get_drvdata(pdev); - struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_private *priv = pci_get_drvdata(pdev); - unregister_netdev(dev); - free_irq(pdev->irq, dev); - pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); + orinoco_if_del(priv); + free_irq(pdev->irq, priv); + free_orinocodev(priv); pci_iounmap(pdev, priv->hw.iobase); pci_release_regions(pdev); pci_disable_device(pdev); } -static struct pci_device_id orinoco_pci_id_table[] = { +static DEFINE_PCI_DEVICE_TABLE(orinoco_pci_id_table) = { /* Intersil Prism 3 */ {0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,}, /* Intersil Prism 2.5 */ @@ -228,7 +226,7 @@ static struct pci_driver orinoco_pci_driver = { .name = DRIVER_NAME, .id_table = orinoco_pci_id_table, .probe = orinoco_pci_init_one, - .remove = __devexit_p(orinoco_pci_remove_one), + .remove = orinoco_pci_remove_one, .suspend = orinoco_pci_suspend, .resume = orinoco_pci_resume, }; @@ -237,7 +235,8 @@ static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION " (Pavel Roskin <proski@gnu.org>," " David Gibson <hermes@gibson.dropbear.id.au> &" " Jean Tourrilhes <jt@hpl.hp.com>)"; -MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>"); +MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> &" + " David Gibson <hermes@gibson.dropbear.id.au>"); MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface"); MODULE_LICENSE("Dual MPL/GPL"); diff --git a/drivers/net/wireless/orinoco/orinoco_pci.h b/drivers/net/wireless/orinoco/orinoco_pci.h index f4e5e06760c..43f5b9f5a0b 100644 --- a/drivers/net/wireless/orinoco/orinoco_pci.h +++ b/drivers/net/wireless/orinoco/orinoco_pci.h @@ -1,10 +1,10 @@ /* orinoco_pci.h - * + * * Common code for all Orinoco drivers for PCI devices, including * both native PCI and PCMCIA-to-PCI bridges. * * Copyright (C) 2005, Pavel Roskin. - * See orinoco.c for license. + * See main.c for license. */ #ifndef _ORINOCO_PCI_H @@ -21,30 +21,10 @@ struct orinoco_pci_card { #ifdef CONFIG_PM static int orinoco_pci_suspend(struct pci_dev *pdev, pm_message_t state) { - struct net_device *dev = pci_get_drvdata(pdev); - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - int err; - - err = orinoco_lock(priv, &flags); - if (err) { - printk(KERN_ERR "%s: cannot lock hardware for suspend\n", - dev->name); - return err; - } - - err = __orinoco_down(dev); - if (err) - printk(KERN_WARNING "%s: error %d bringing interface down " - "for suspend\n", dev->name, err); - - netif_device_detach(dev); - - priv->hw_unavailable++; - - orinoco_unlock(priv, &flags); + struct orinoco_private *priv = pci_get_drvdata(pdev); - free_irq(pdev->irq, dev); + orinoco_down(priv); + free_irq(pdev->irq, priv); pci_save_state(pdev); pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); @@ -54,12 +34,11 @@ static int orinoco_pci_suspend(struct pci_dev *pdev, pm_message_t state) static int orinoco_pci_resume(struct pci_dev *pdev) { - struct net_device *dev = pci_get_drvdata(pdev); - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; + struct orinoco_private *priv = pci_get_drvdata(pdev); + struct net_device *dev = priv->ndev; int err; - pci_set_power_state(pdev, 0); + pci_set_power_state(pdev, PCI_D0); err = pci_enable_device(pdev); if (err) { printk(KERN_ERR "%s: pci_enable_device failed on resume\n", @@ -69,7 +48,7 @@ static int orinoco_pci_resume(struct pci_dev *pdev) pci_restore_state(pdev); err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, - dev->name, dev); + dev->name, priv); if (err) { printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n", dev->name); @@ -77,29 +56,9 @@ static int orinoco_pci_resume(struct pci_dev *pdev) return -EBUSY; } - err = orinoco_reinit_firmware(dev); - if (err) { - printk(KERN_ERR "%s: error %d re-initializing firmware " - "on resume\n", dev->name, err); - return err; - } - - spin_lock_irqsave(&priv->lock, flags); - - netif_device_attach(dev); + err = orinoco_up(priv); - priv->hw_unavailable--; - - if (priv->open && (! priv->hw_unavailable)) { - err = __orinoco_up(dev); - if (err) - printk(KERN_ERR "%s: Error %d restarting card on resume\n", - dev->name, err); - } - - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; + return err; } #else #define orinoco_pci_suspend NULL diff --git a/drivers/net/wireless/orinoco/orinoco_plx.c b/drivers/net/wireless/orinoco/orinoco_plx.c index ef761857bb3..bbd36d1676f 100644 --- a/drivers/net/wireless/orinoco/orinoco_plx.c +++ b/drivers/net/wireless/orinoco/orinoco_plx.c @@ -4,7 +4,7 @@ * but are connected to the PCI bus by a PLX9052. * * Current maintainers are: - * Pavel Roskin <proski AT gnu.org> + * Pavel Roskin <proski AT gnu.org> * and David Gibson <hermes AT gibson.dropbear.id.au> * * (C) Copyright David Gibson, IBM Corp. 2001-2003. @@ -102,14 +102,14 @@ #define PLX_RESET_TIME (500) /* milliseconds */ #define PLX_INTCSR 0x4c /* Interrupt Control & Status Register */ -#define PLX_INTCSR_INTEN (1<<6) /* Interrupt Enable bit */ +#define PLX_INTCSR_INTEN (1 << 6) /* Interrupt Enable bit */ /* * Do a soft reset of the card using the Configuration Option Register */ static int orinoco_plx_cor_reset(struct orinoco_private *priv) { - hermes_t *hw = &priv->hw; + struct hermes *hw = &priv->hw; struct orinoco_pci_card *card = priv->card; unsigned long timeout; u16 reg; @@ -146,9 +146,8 @@ static int orinoco_plx_hw_init(struct orinoco_pci_card *card) }; printk(KERN_DEBUG PFX "CIS: "); - for (i = 0; i < 16; i++) { + for (i = 0; i < 16; i++) printk("%02X:", ioread8(card->attr_io + (i << 1))); - } printk("\n"); /* Verify whether a supported PC card is present */ @@ -184,7 +183,6 @@ static int orinoco_plx_init_one(struct pci_dev *pdev, int err; struct orinoco_private *priv; struct orinoco_pci_card *card; - struct net_device *dev; void __iomem *hermes_io, *attr_io, *bridge_io; err = pci_enable_device(pdev); @@ -221,24 +219,22 @@ static int orinoco_plx_init_one(struct pci_dev *pdev, } /* Allocate network device */ - dev = alloc_orinocodev(sizeof(*card), &pdev->dev, - orinoco_plx_cor_reset, NULL); - if (!dev) { + priv = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_plx_cor_reset, NULL); + if (!priv) { printk(KERN_ERR PFX "Cannot allocate network device\n"); err = -ENOMEM; goto fail_alloc; } - priv = netdev_priv(dev); card = priv->card; card->bridge_io = bridge_io; card->attr_io = attr_io; - SET_NETDEV_DEV(dev, &pdev->dev); hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, - dev->name, dev); + DRIVER_NAME, priv); if (err) { printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); err = -EBUSY; @@ -257,24 +253,27 @@ static int orinoco_plx_init_one(struct pci_dev *pdev, goto fail; } - err = register_netdev(dev); + err = orinoco_init(priv); + if (err) { + printk(KERN_ERR PFX "orinoco_init() failed\n"); + goto fail; + } + + err = orinoco_if_add(priv, 0, 0, NULL); if (err) { - printk(KERN_ERR PFX "Cannot register network device\n"); + printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto fail; } - pci_set_drvdata(pdev, dev); - printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name, - pci_name(pdev)); + pci_set_drvdata(pdev, priv); return 0; fail: - free_irq(pdev->irq, dev); + free_irq(pdev->irq, priv); fail_irq: - pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); + free_orinocodev(priv); fail_alloc: pci_iounmap(pdev, hermes_io); @@ -294,16 +293,14 @@ static int orinoco_plx_init_one(struct pci_dev *pdev, return err; } -static void __devexit orinoco_plx_remove_one(struct pci_dev *pdev) +static void orinoco_plx_remove_one(struct pci_dev *pdev) { - struct net_device *dev = pci_get_drvdata(pdev); - struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_private *priv = pci_get_drvdata(pdev); struct orinoco_pci_card *card = priv->card; - unregister_netdev(dev); - free_irq(pdev->irq, dev); - pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); + orinoco_if_del(priv); + free_irq(pdev->irq, priv); + free_orinocodev(priv); pci_iounmap(pdev, priv->hw.iobase); pci_iounmap(pdev, card->attr_io); pci_iounmap(pdev, card->bridge_io); @@ -311,7 +308,7 @@ static void __devexit orinoco_plx_remove_one(struct pci_dev *pdev) pci_disable_device(pdev); } -static struct pci_device_id orinoco_plx_id_table[] = { +static DEFINE_PCI_DEVICE_TABLE(orinoco_plx_id_table) = { {0x111a, 0x1023, PCI_ANY_ID, PCI_ANY_ID,}, /* Siemens SpeedStream SS1023 */ {0x1385, 0x4100, PCI_ANY_ID, PCI_ANY_ID,}, /* Netgear MA301 */ {0x15e8, 0x0130, PCI_ANY_ID, PCI_ANY_ID,}, /* Correga - does this work? */ @@ -335,7 +332,7 @@ static struct pci_driver orinoco_plx_driver = { .name = DRIVER_NAME, .id_table = orinoco_plx_id_table, .probe = orinoco_plx_init_one, - .remove = __devexit_p(orinoco_plx_remove_one), + .remove = orinoco_plx_remove_one, .suspend = orinoco_pci_suspend, .resume = orinoco_pci_resume, }; diff --git a/drivers/net/wireless/orinoco/orinoco_tmd.c b/drivers/net/wireless/orinoco/orinoco_tmd.c index ede24ec309c..04b08de5fd5 100644 --- a/drivers/net/wireless/orinoco/orinoco_tmd.c +++ b/drivers/net/wireless/orinoco/orinoco_tmd.c @@ -1,7 +1,7 @@ /* orinoco_tmd.c * * Driver for Prism II devices which would usually be driven by orinoco_cs, - * but are connected to the PCI bus by a TMD7160. + * but are connected to the PCI bus by a TMD7160. * * Copyright (C) 2003 Joerg Dorchain <joerg AT dorchain.net> * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow @@ -27,7 +27,7 @@ * provisions above, a recipient may use your version of this file * under either the MPL or the GPL. * - * The actual driving is done by orinoco.c, this is just resource + * The actual driving is done by main.c, this is just resource * allocation stuff. * * This driver is modeled after the orinoco_plx driver. The main @@ -59,7 +59,7 @@ */ static int orinoco_tmd_cor_reset(struct orinoco_private *priv) { - hermes_t *hw = &priv->hw; + struct hermes *hw = &priv->hw; struct orinoco_pci_card *card = priv->card; unsigned long timeout; u16 reg; @@ -94,7 +94,6 @@ static int orinoco_tmd_init_one(struct pci_dev *pdev, int err; struct orinoco_private *priv; struct orinoco_pci_card *card; - struct net_device *dev; void __iomem *hermes_io, *bridge_io; err = pci_enable_device(pdev); @@ -124,23 +123,21 @@ static int orinoco_tmd_init_one(struct pci_dev *pdev, } /* Allocate network device */ - dev = alloc_orinocodev(sizeof(*card), &pdev->dev, - orinoco_tmd_cor_reset, NULL); - if (!dev) { + priv = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_tmd_cor_reset, NULL); + if (!priv) { printk(KERN_ERR PFX "Cannot allocate network device\n"); err = -ENOMEM; goto fail_alloc; } - priv = netdev_priv(dev); card = priv->card; card->bridge_io = bridge_io; - SET_NETDEV_DEV(dev, &pdev->dev); hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, - dev->name, dev); + DRIVER_NAME, priv); if (err) { printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); err = -EBUSY; @@ -153,24 +150,27 @@ static int orinoco_tmd_init_one(struct pci_dev *pdev, goto fail; } - err = register_netdev(dev); + err = orinoco_init(priv); if (err) { - printk(KERN_ERR PFX "Cannot register network device\n"); + printk(KERN_ERR PFX "orinoco_init() failed\n"); goto fail; } - pci_set_drvdata(pdev, dev); - printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name, - pci_name(pdev)); + err = orinoco_if_add(priv, 0, 0, NULL); + if (err) { + printk(KERN_ERR PFX "orinoco_if_add() failed\n"); + goto fail; + } + + pci_set_drvdata(pdev, priv); return 0; fail: - free_irq(pdev->irq, dev); + free_irq(pdev->irq, priv); fail_irq: - pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); + free_orinocodev(priv); fail_alloc: pci_iounmap(pdev, hermes_io); @@ -187,23 +187,21 @@ static int orinoco_tmd_init_one(struct pci_dev *pdev, return err; } -static void __devexit orinoco_tmd_remove_one(struct pci_dev *pdev) +static void orinoco_tmd_remove_one(struct pci_dev *pdev) { - struct net_device *dev = pci_get_drvdata(pdev); - struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_private *priv = pci_get_drvdata(pdev); struct orinoco_pci_card *card = priv->card; - unregister_netdev(dev); - free_irq(pdev->irq, dev); - pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); + orinoco_if_del(priv); + free_irq(pdev->irq, priv); + free_orinocodev(priv); pci_iounmap(pdev, priv->hw.iobase); pci_iounmap(pdev, card->bridge_io); pci_release_regions(pdev); pci_disable_device(pdev); } -static struct pci_device_id orinoco_tmd_id_table[] = { +static DEFINE_PCI_DEVICE_TABLE(orinoco_tmd_id_table) = { {0x15e8, 0x0131, PCI_ANY_ID, PCI_ANY_ID,}, /* NDC and OEMs, e.g. pheecom */ {0,}, }; @@ -214,7 +212,7 @@ static struct pci_driver orinoco_tmd_driver = { .name = DRIVER_NAME, .id_table = orinoco_tmd_id_table, .probe = orinoco_tmd_init_one, - .remove = __devexit_p(orinoco_tmd_remove_one), + .remove = orinoco_tmd_remove_one, .suspend = orinoco_pci_suspend, .resume = orinoco_pci_resume, }; diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c new file mode 100644 index 00000000000..c90939ced0e --- /dev/null +++ b/drivers/net/wireless/orinoco/orinoco_usb.c @@ -0,0 +1,1754 @@ +/* + * USB Orinoco driver + * + * Copyright (c) 2003 Manuel Estrada Sainz + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + * + * Queueing code based on linux-wlan-ng 0.2.1-pre5 + * + * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + * + * The license is the same as above. + * + * Initialy based on USB Skeleton driver - 0.7 + * + * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * NOTE: The original USB Skeleton driver is GPL, but all that code is + * gone so MPL/GPL applies. + */ + +#define DRIVER_NAME "orinoco_usb" +#define PFX DRIVER_NAME ": " + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/errno.h> +#include <linux/poll.h> +#include <linux/slab.h> +#include <linux/fcntl.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/usb.h> +#include <linux/timer.h> + +#include <linux/netdevice.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/wireless.h> +#include <linux/firmware.h> + +#include "mic.h" +#include "orinoco.h" + +#ifndef URB_ASYNC_UNLINK +#define URB_ASYNC_UNLINK 0 +#endif + +/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ +static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; +#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) + +struct header_struct { + /* 802.3 */ + u8 dest[ETH_ALEN]; + u8 src[ETH_ALEN]; + __be16 len; + /* 802.2 */ + u8 dsap; + u8 ssap; + u8 ctrl; + /* SNAP */ + u8 oui[3]; + __be16 ethertype; +} __packed; + +struct ez_usb_fw { + u16 size; + const u8 *code; +}; + +static struct ez_usb_fw firmware = { + .size = 0, + .code = NULL, +}; + +/* Debugging macros */ +#undef err +#define err(format, arg...) \ + do { printk(KERN_ERR PFX format "\n", ## arg); } while (0) + +MODULE_FIRMWARE("orinoco_ezusb_fw"); + +/* + * Under some conditions, the card gets stuck and stops paying attention + * to the world (i.e. data communication stalls) until we do something to + * it. Sending an INQ_TALLIES command seems to be enough and should be + * harmless otherwise. This behaviour has been observed when using the + * driver on a systemimager client during installation. In the past a + * timer was used to send INQ_TALLIES commands when there was no other + * activity, but it was troublesome and was removed. + */ + +#define USB_COMPAQ_VENDOR_ID 0x049f /* Compaq Computer Corp. */ +#define USB_COMPAQ_WL215_ID 0x001f /* Compaq WL215 USB Adapter */ +#define USB_COMPAQ_W200_ID 0x0076 /* Compaq W200 USB Adapter */ +#define USB_HP_WL215_ID 0x0082 /* Compaq WL215 USB Adapter */ + +#define USB_MELCO_VENDOR_ID 0x0411 +#define USB_BUFFALO_L11_ID 0x0006 /* BUFFALO WLI-USB-L11 */ +#define USB_BUFFALO_L11G_WR_ID 0x000B /* BUFFALO WLI-USB-L11G-WR */ +#define USB_BUFFALO_L11G_ID 0x000D /* BUFFALO WLI-USB-L11G */ + +#define USB_LUCENT_VENDOR_ID 0x047E /* Lucent Technologies */ +#define USB_LUCENT_ORINOCO_ID 0x0300 /* Lucent/Agere Orinoco USB Client */ + +#define USB_AVAYA8_VENDOR_ID 0x0D98 +#define USB_AVAYAE_VENDOR_ID 0x0D9E +#define USB_AVAYA_WIRELESS_ID 0x0300 /* Avaya Wireless USB Card */ + +#define USB_AGERE_VENDOR_ID 0x0D4E /* Agere Systems */ +#define USB_AGERE_MODEL0801_ID 0x1000 /* Wireless USB Card Model 0801 */ +#define USB_AGERE_MODEL0802_ID 0x1001 /* Wireless USB Card Model 0802 */ +#define USB_AGERE_REBRANDED_ID 0x047A /* WLAN USB Card */ + +#define USB_ELSA_VENDOR_ID 0x05CC +#define USB_ELSA_AIRLANCER_ID 0x3100 /* ELSA AirLancer USB-11 */ + +#define USB_LEGEND_VENDOR_ID 0x0E7C +#define USB_LEGEND_JOYNET_ID 0x0300 /* Joynet WLAN USB Card */ + +#define USB_SAMSUNG_VENDOR_ID 0x04E8 +#define USB_SAMSUNG_SEW2001U1_ID 0x5002 /* Samsung SEW-2001u Card */ +#define USB_SAMSUNG_SEW2001U2_ID 0x5B11 /* Samsung SEW-2001u Card */ +#define USB_SAMSUNG_SEW2003U_ID 0x7011 /* Samsung SEW-2003U Card */ + +#define USB_IGATE_VENDOR_ID 0x0681 +#define USB_IGATE_IGATE_11M_ID 0x0012 /* I-GATE 11M USB Card */ + +#define USB_FUJITSU_VENDOR_ID 0x0BF8 +#define USB_FUJITSU_E1100_ID 0x1002 /* connect2AIR WLAN E-1100 USB */ + +#define USB_2WIRE_VENDOR_ID 0x1630 +#define USB_2WIRE_WIRELESS_ID 0xff81 /* 2Wire Wireless USB adapter */ + + +#define EZUSB_REQUEST_FW_TRANS 0xA0 +#define EZUSB_REQUEST_TRIGER 0xAA +#define EZUSB_REQUEST_TRIG_AC 0xAC +#define EZUSB_CPUCS_REG 0x7F92 + +#define EZUSB_RID_TX 0x0700 +#define EZUSB_RID_RX 0x0701 +#define EZUSB_RID_INIT1 0x0702 +#define EZUSB_RID_ACK 0x0710 +#define EZUSB_RID_READ_PDA 0x0800 +#define EZUSB_RID_PROG_INIT 0x0852 +#define EZUSB_RID_PROG_SET_ADDR 0x0853 +#define EZUSB_RID_PROG_BYTES 0x0854 +#define EZUSB_RID_PROG_END 0x0855 +#define EZUSB_RID_DOCMD 0x0860 + +/* Recognize info frames */ +#define EZUSB_IS_INFO(id) ((id >= 0xF000) && (id <= 0xF2FF)) + +#define EZUSB_MAGIC 0x0210 + +#define EZUSB_FRAME_DATA 1 +#define EZUSB_FRAME_CONTROL 2 + +#define DEF_TIMEOUT (3 * HZ) + +#define BULK_BUF_SIZE 2048 + +#define MAX_DL_SIZE (BULK_BUF_SIZE - sizeof(struct ezusb_packet)) + +#define FW_BUF_SIZE 64 +#define FW_VAR_OFFSET_PTR 0x359 +#define FW_VAR_VALUE 0 +#define FW_HOLE_START 0x100 +#define FW_HOLE_END 0x300 + +struct ezusb_packet { + __le16 magic; /* 0x0210 */ + u8 req_reply_count; + u8 ans_reply_count; + __le16 frame_type; /* 0x01 for data frames, 0x02 otherwise */ + __le16 size; /* transport size */ + __le16 crc; /* CRC up to here */ + __le16 hermes_len; + __le16 hermes_rid; + u8 data[0]; +} __packed; + +/* Table of devices that work or may work with this driver */ +static struct usb_device_id ezusb_table[] = { + {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_WL215_ID)}, + {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_HP_WL215_ID)}, + {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_W200_ID)}, + {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11_ID)}, + {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_WR_ID)}, + {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_ID)}, + {USB_DEVICE(USB_LUCENT_VENDOR_ID, USB_LUCENT_ORINOCO_ID)}, + {USB_DEVICE(USB_AVAYA8_VENDOR_ID, USB_AVAYA_WIRELESS_ID)}, + {USB_DEVICE(USB_AVAYAE_VENDOR_ID, USB_AVAYA_WIRELESS_ID)}, + {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0801_ID)}, + {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0802_ID)}, + {USB_DEVICE(USB_ELSA_VENDOR_ID, USB_ELSA_AIRLANCER_ID)}, + {USB_DEVICE(USB_LEGEND_VENDOR_ID, USB_LEGEND_JOYNET_ID)}, + {USB_DEVICE_VER(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U1_ID, + 0, 0)}, + {USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U2_ID)}, + {USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2003U_ID)}, + {USB_DEVICE(USB_IGATE_VENDOR_ID, USB_IGATE_IGATE_11M_ID)}, + {USB_DEVICE(USB_FUJITSU_VENDOR_ID, USB_FUJITSU_E1100_ID)}, + {USB_DEVICE(USB_2WIRE_VENDOR_ID, USB_2WIRE_WIRELESS_ID)}, + {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_REBRANDED_ID)}, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, ezusb_table); + +/* Structure to hold all of our device specific stuff */ +struct ezusb_priv { + struct usb_device *udev; + struct net_device *dev; + struct mutex mtx; + spinlock_t req_lock; + struct list_head req_pending; + struct list_head req_active; + spinlock_t reply_count_lock; + u16 hermes_reg_fake[0x40]; + u8 *bap_buf; + struct urb *read_urb; + int read_pipe; + int write_pipe; + u8 reply_count; +}; + +enum ezusb_state { + EZUSB_CTX_START, + EZUSB_CTX_QUEUED, + EZUSB_CTX_REQ_SUBMITTED, + EZUSB_CTX_REQ_COMPLETE, + EZUSB_CTX_RESP_RECEIVED, + EZUSB_CTX_REQ_TIMEOUT, + EZUSB_CTX_REQ_FAILED, + EZUSB_CTX_RESP_TIMEOUT, + EZUSB_CTX_REQSUBMIT_FAIL, + EZUSB_CTX_COMPLETE, +}; + +struct request_context { + struct list_head list; + atomic_t refcount; + struct completion done; /* Signals that CTX is dead */ + int killed; + struct urb *outurb; /* OUT for req pkt */ + struct ezusb_priv *upriv; + struct ezusb_packet *buf; + int buf_length; + struct timer_list timer; /* Timeout handling */ + enum ezusb_state state; /* Current state */ + /* the RID that we will wait for */ + u16 out_rid; + u16 in_rid; +}; + + +/* Forward declarations */ +static void ezusb_ctx_complete(struct request_context *ctx); +static void ezusb_req_queue_run(struct ezusb_priv *upriv); +static void ezusb_bulk_in_callback(struct urb *urb); + +static inline u8 ezusb_reply_inc(u8 count) +{ + if (count < 0x7F) + return count + 1; + else + return 1; +} + +static void ezusb_request_context_put(struct request_context *ctx) +{ + if (!atomic_dec_and_test(&ctx->refcount)) + return; + + WARN_ON(!ctx->done.done); + BUG_ON(ctx->outurb->status == -EINPROGRESS); + BUG_ON(timer_pending(&ctx->timer)); + usb_free_urb(ctx->outurb); + kfree(ctx->buf); + kfree(ctx); +} + +static inline void ezusb_mod_timer(struct ezusb_priv *upriv, + struct timer_list *timer, + unsigned long expire) +{ + if (!upriv->udev) + return; + mod_timer(timer, expire); +} + +static void ezusb_request_timerfn(u_long _ctx) +{ + struct request_context *ctx = (void *) _ctx; + + ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK; + if (usb_unlink_urb(ctx->outurb) == -EINPROGRESS) { + ctx->state = EZUSB_CTX_REQ_TIMEOUT; + } else { + ctx->state = EZUSB_CTX_RESP_TIMEOUT; + dev_dbg(&ctx->outurb->dev->dev, "couldn't unlink\n"); + atomic_inc(&ctx->refcount); + ctx->killed = 1; + ezusb_ctx_complete(ctx); + ezusb_request_context_put(ctx); + } +}; + +static struct request_context *ezusb_alloc_ctx(struct ezusb_priv *upriv, + u16 out_rid, u16 in_rid) +{ + struct request_context *ctx; + + ctx = kzalloc(sizeof(*ctx), GFP_ATOMIC); + if (!ctx) + return NULL; + + ctx->buf = kmalloc(BULK_BUF_SIZE, GFP_ATOMIC); + if (!ctx->buf) { + kfree(ctx); + return NULL; + } + ctx->outurb = usb_alloc_urb(0, GFP_ATOMIC); + if (!ctx->outurb) { + kfree(ctx->buf); + kfree(ctx); + return NULL; + } + + ctx->upriv = upriv; + ctx->state = EZUSB_CTX_START; + ctx->out_rid = out_rid; + ctx->in_rid = in_rid; + + atomic_set(&ctx->refcount, 1); + init_completion(&ctx->done); + + init_timer(&ctx->timer); + ctx->timer.function = ezusb_request_timerfn; + ctx->timer.data = (u_long) ctx; + return ctx; +} + + +/* Hopefully the real complete_all will soon be exported, in the mean + * while this should work. */ +static inline void ezusb_complete_all(struct completion *comp) +{ + complete(comp); + complete(comp); + complete(comp); + complete(comp); +} + +static void ezusb_ctx_complete(struct request_context *ctx) +{ + struct ezusb_priv *upriv = ctx->upriv; + unsigned long flags; + + spin_lock_irqsave(&upriv->req_lock, flags); + + list_del_init(&ctx->list); + if (upriv->udev) { + spin_unlock_irqrestore(&upriv->req_lock, flags); + ezusb_req_queue_run(upriv); + spin_lock_irqsave(&upriv->req_lock, flags); + } + + switch (ctx->state) { + case EZUSB_CTX_COMPLETE: + case EZUSB_CTX_REQSUBMIT_FAIL: + case EZUSB_CTX_REQ_FAILED: + case EZUSB_CTX_REQ_TIMEOUT: + case EZUSB_CTX_RESP_TIMEOUT: + spin_unlock_irqrestore(&upriv->req_lock, flags); + + if ((ctx->out_rid == EZUSB_RID_TX) && upriv->dev) { + struct net_device *dev = upriv->dev; + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + + if (ctx->state != EZUSB_CTX_COMPLETE) + stats->tx_errors++; + else + stats->tx_packets++; + + netif_wake_queue(dev); + } + ezusb_complete_all(&ctx->done); + ezusb_request_context_put(ctx); + break; + + default: + spin_unlock_irqrestore(&upriv->req_lock, flags); + if (!upriv->udev) { + /* This is normal, as all request contexts get flushed + * when the device is disconnected */ + err("Called, CTX not terminating, but device gone"); + ezusb_complete_all(&ctx->done); + ezusb_request_context_put(ctx); + break; + } + + err("Called, CTX not in terminating state."); + /* Things are really bad if this happens. Just leak + * the CTX because it may still be linked to the + * queue or the OUT urb may still be active. + * Just leaking at least prevents an Oops or Panic. + */ + break; + } +} + +/** + * ezusb_req_queue_run: + * Description: + * Note: Only one active CTX at any one time, because there's no + * other (reliable) way to match the response URB to the correct + * CTX. + **/ +static void ezusb_req_queue_run(struct ezusb_priv *upriv) +{ + unsigned long flags; + struct request_context *ctx; + int result; + + spin_lock_irqsave(&upriv->req_lock, flags); + + if (!list_empty(&upriv->req_active)) + goto unlock; + + if (list_empty(&upriv->req_pending)) + goto unlock; + + ctx = + list_entry(upriv->req_pending.next, struct request_context, + list); + + if (!ctx->upriv->udev) + goto unlock; + + /* We need to split this off to avoid a race condition */ + list_move_tail(&ctx->list, &upriv->req_active); + + if (ctx->state == EZUSB_CTX_QUEUED) { + atomic_inc(&ctx->refcount); + result = usb_submit_urb(ctx->outurb, GFP_ATOMIC); + if (result) { + ctx->state = EZUSB_CTX_REQSUBMIT_FAIL; + + spin_unlock_irqrestore(&upriv->req_lock, flags); + + err("Fatal, failed to submit command urb." + " error=%d\n", result); + + ezusb_ctx_complete(ctx); + ezusb_request_context_put(ctx); + goto done; + } + + ctx->state = EZUSB_CTX_REQ_SUBMITTED; + ezusb_mod_timer(ctx->upriv, &ctx->timer, + jiffies + DEF_TIMEOUT); + } + + unlock: + spin_unlock_irqrestore(&upriv->req_lock, flags); + + done: + return; +} + +static void ezusb_req_enqueue_run(struct ezusb_priv *upriv, + struct request_context *ctx) +{ + unsigned long flags; + + spin_lock_irqsave(&upriv->req_lock, flags); + + if (!ctx->upriv->udev) { + spin_unlock_irqrestore(&upriv->req_lock, flags); + goto done; + } + atomic_inc(&ctx->refcount); + list_add_tail(&ctx->list, &upriv->req_pending); + spin_unlock_irqrestore(&upriv->req_lock, flags); + + ctx->state = EZUSB_CTX_QUEUED; + ezusb_req_queue_run(upriv); + + done: + return; +} + +static void ezusb_request_out_callback(struct urb *urb) +{ + unsigned long flags; + enum ezusb_state state; + struct request_context *ctx = urb->context; + struct ezusb_priv *upriv = ctx->upriv; + + spin_lock_irqsave(&upriv->req_lock, flags); + + del_timer(&ctx->timer); + + if (ctx->killed) { + spin_unlock_irqrestore(&upriv->req_lock, flags); + pr_warning("interrupt called with dead ctx"); + goto out; + } + + state = ctx->state; + + if (urb->status == 0) { + switch (state) { + case EZUSB_CTX_REQ_SUBMITTED: + if (ctx->in_rid) { + ctx->state = EZUSB_CTX_REQ_COMPLETE; + /* reply URB still pending */ + ezusb_mod_timer(upriv, &ctx->timer, + jiffies + DEF_TIMEOUT); + spin_unlock_irqrestore(&upriv->req_lock, + flags); + break; + } + /* fall through */ + case EZUSB_CTX_RESP_RECEIVED: + /* IN already received before this OUT-ACK */ + ctx->state = EZUSB_CTX_COMPLETE; + spin_unlock_irqrestore(&upriv->req_lock, flags); + ezusb_ctx_complete(ctx); + break; + + default: + spin_unlock_irqrestore(&upriv->req_lock, flags); + err("Unexpected state(0x%x, %d) in OUT URB", + state, urb->status); + break; + } + } else { + /* If someone cancels the OUT URB then its status + * should be either -ECONNRESET or -ENOENT. + */ + switch (state) { + case EZUSB_CTX_REQ_SUBMITTED: + case EZUSB_CTX_RESP_RECEIVED: + ctx->state = EZUSB_CTX_REQ_FAILED; + /* fall through */ + + case EZUSB_CTX_REQ_FAILED: + case EZUSB_CTX_REQ_TIMEOUT: + spin_unlock_irqrestore(&upriv->req_lock, flags); + + ezusb_ctx_complete(ctx); + break; + + default: + spin_unlock_irqrestore(&upriv->req_lock, flags); + + err("Unexpected state(0x%x, %d) in OUT URB", + state, urb->status); + break; + } + } + out: + ezusb_request_context_put(ctx); +} + +static void ezusb_request_in_callback(struct ezusb_priv *upriv, + struct urb *urb) +{ + struct ezusb_packet *ans = urb->transfer_buffer; + struct request_context *ctx = NULL; + enum ezusb_state state; + unsigned long flags; + + /* Find the CTX on the active queue that requested this URB */ + spin_lock_irqsave(&upriv->req_lock, flags); + if (upriv->udev) { + struct list_head *item; + + list_for_each(item, &upriv->req_active) { + struct request_context *c; + int reply_count; + + c = list_entry(item, struct request_context, list); + reply_count = + ezusb_reply_inc(c->buf->req_reply_count); + if ((ans->ans_reply_count == reply_count) + && (le16_to_cpu(ans->hermes_rid) == c->in_rid)) { + ctx = c; + break; + } + netdev_dbg(upriv->dev, "Skipped (0x%x/0x%x) (%d/%d)\n", + le16_to_cpu(ans->hermes_rid), c->in_rid, + ans->ans_reply_count, reply_count); + } + } + + if (ctx == NULL) { + spin_unlock_irqrestore(&upriv->req_lock, flags); + err("%s: got unexpected RID: 0x%04X", __func__, + le16_to_cpu(ans->hermes_rid)); + ezusb_req_queue_run(upriv); + return; + } + + /* The data we want is in the in buffer, exchange */ + urb->transfer_buffer = ctx->buf; + ctx->buf = (void *) ans; + ctx->buf_length = urb->actual_length; + + state = ctx->state; + switch (state) { + case EZUSB_CTX_REQ_SUBMITTED: + /* We have received our response URB before + * our request has been acknowledged. Do NOT + * destroy our CTX yet, because our OUT URB + * is still alive ... + */ + ctx->state = EZUSB_CTX_RESP_RECEIVED; + spin_unlock_irqrestore(&upriv->req_lock, flags); + + /* Let the machine continue running. */ + break; + + case EZUSB_CTX_REQ_COMPLETE: + /* This is the usual path: our request + * has already been acknowledged, and + * we have now received the reply. + */ + ctx->state = EZUSB_CTX_COMPLETE; + + /* Stop the intimer */ + del_timer(&ctx->timer); + spin_unlock_irqrestore(&upriv->req_lock, flags); + + /* Call the completion handler */ + ezusb_ctx_complete(ctx); + break; + + default: + spin_unlock_irqrestore(&upriv->req_lock, flags); + + pr_warning("Matched IN URB, unexpected context state(0x%x)", + state); + /* Throw this CTX away and try submitting another */ + del_timer(&ctx->timer); + ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK; + usb_unlink_urb(ctx->outurb); + ezusb_req_queue_run(upriv); + break; + } /* switch */ +} + + +static void ezusb_req_ctx_wait(struct ezusb_priv *upriv, + struct request_context *ctx) +{ + switch (ctx->state) { + case EZUSB_CTX_QUEUED: + case EZUSB_CTX_REQ_SUBMITTED: + case EZUSB_CTX_REQ_COMPLETE: + case EZUSB_CTX_RESP_RECEIVED: + if (in_softirq()) { + /* If we get called from a timer, timeout timers don't + * get the chance to run themselves. So we make sure + * that we don't sleep for ever */ + int msecs = DEF_TIMEOUT * (1000 / HZ); + while (!ctx->done.done && msecs--) + udelay(1000); + } else { + wait_event_interruptible(ctx->done.wait, + ctx->done.done); + } + break; + default: + /* Done or failed - nothing to wait for */ + break; + } +} + +static inline u16 build_crc(struct ezusb_packet *data) +{ + u16 crc = 0; + u8 *bytes = (u8 *)data; + int i; + + for (i = 0; i < 8; i++) + crc = (crc << 1) + bytes[i]; + + return crc; +} + +/** + * ezusb_fill_req: + * + * if data == NULL and length > 0 the data is assumed to be already in + * the target buffer and only the header is filled. + * + */ +static int ezusb_fill_req(struct ezusb_packet *req, u16 length, u16 rid, + const void *data, u16 frame_type, u8 reply_count) +{ + int total_size = sizeof(*req) + length; + + BUG_ON(total_size > BULK_BUF_SIZE); + + req->magic = cpu_to_le16(EZUSB_MAGIC); + req->req_reply_count = reply_count; + req->ans_reply_count = 0; + req->frame_type = cpu_to_le16(frame_type); + req->size = cpu_to_le16(length + 4); + req->crc = cpu_to_le16(build_crc(req)); + req->hermes_len = cpu_to_le16(HERMES_BYTES_TO_RECLEN(length)); + req->hermes_rid = cpu_to_le16(rid); + if (data) + memcpy(req->data, data, length); + return total_size; +} + +static int ezusb_submit_in_urb(struct ezusb_priv *upriv) +{ + int retval = 0; + void *cur_buf = upriv->read_urb->transfer_buffer; + + if (upriv->read_urb->status == -EINPROGRESS) { + netdev_dbg(upriv->dev, "urb busy, not resubmiting\n"); + retval = -EBUSY; + goto exit; + } + usb_fill_bulk_urb(upriv->read_urb, upriv->udev, upriv->read_pipe, + cur_buf, BULK_BUF_SIZE, + ezusb_bulk_in_callback, upriv); + upriv->read_urb->transfer_flags = 0; + retval = usb_submit_urb(upriv->read_urb, GFP_ATOMIC); + if (retval) + err("%s submit failed %d", __func__, retval); + + exit: + return retval; +} + +static inline int ezusb_8051_cpucs(struct ezusb_priv *upriv, int reset) +{ + u8 res_val = reset; /* avoid argument promotion */ + + if (!upriv->udev) { + err("%s: !upriv->udev", __func__); + return -EFAULT; + } + return usb_control_msg(upriv->udev, + usb_sndctrlpipe(upriv->udev, 0), + EZUSB_REQUEST_FW_TRANS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | + USB_DIR_OUT, EZUSB_CPUCS_REG, 0, &res_val, + sizeof(res_val), DEF_TIMEOUT); +} + +static int ezusb_firmware_download(struct ezusb_priv *upriv, + struct ez_usb_fw *fw) +{ + u8 *fw_buffer; + int retval, addr; + int variant_offset; + + fw_buffer = kmalloc(FW_BUF_SIZE, GFP_KERNEL); + if (!fw_buffer) { + printk(KERN_ERR PFX "Out of memory for firmware buffer.\n"); + return -ENOMEM; + } + /* + * This byte is 1 and should be replaced with 0. The offset is + * 0x10AD in version 0.0.6. The byte in question should follow + * the end of the code pointed to by the jump in the beginning + * of the firmware. Also, it is read by code located at 0x358. + */ + variant_offset = be16_to_cpup((__be16 *) &fw->code[FW_VAR_OFFSET_PTR]); + if (variant_offset >= fw->size) { + printk(KERN_ERR PFX "Invalid firmware variant offset: " + "0x%04x\n", variant_offset); + retval = -EINVAL; + goto fail; + } + + retval = ezusb_8051_cpucs(upriv, 1); + if (retval < 0) + goto fail; + for (addr = 0; addr < fw->size; addr += FW_BUF_SIZE) { + /* 0x100-0x300 should be left alone, it contains card + * specific data, like USB enumeration information */ + if ((addr >= FW_HOLE_START) && (addr < FW_HOLE_END)) + continue; + + memcpy(fw_buffer, &fw->code[addr], FW_BUF_SIZE); + if (variant_offset >= addr && + variant_offset < addr + FW_BUF_SIZE) { + netdev_dbg(upriv->dev, + "Patching card_variant byte at 0x%04X\n", + variant_offset); + fw_buffer[variant_offset - addr] = FW_VAR_VALUE; + } + retval = usb_control_msg(upriv->udev, + usb_sndctrlpipe(upriv->udev, 0), + EZUSB_REQUEST_FW_TRANS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE + | USB_DIR_OUT, + addr, 0x0, + fw_buffer, FW_BUF_SIZE, + DEF_TIMEOUT); + + if (retval < 0) + goto fail; + } + retval = ezusb_8051_cpucs(upriv, 0); + if (retval < 0) + goto fail; + + goto exit; + fail: + printk(KERN_ERR PFX "Firmware download failed, error %d\n", + retval); + exit: + kfree(fw_buffer); + return retval; +} + +static int ezusb_access_ltv(struct ezusb_priv *upriv, + struct request_context *ctx, + u16 length, const void *data, u16 frame_type, + void *ans_buff, unsigned ans_size, u16 *ans_length) +{ + int req_size; + int retval = 0; + enum ezusb_state state; + + BUG_ON(in_irq()); + + if (!upriv->udev) { + retval = -ENODEV; + goto exit; + } + + if (upriv->read_urb->status != -EINPROGRESS) + err("%s: in urb not pending", __func__); + + /* protect upriv->reply_count, guarantee sequential numbers */ + spin_lock_bh(&upriv->reply_count_lock); + req_size = ezusb_fill_req(ctx->buf, length, ctx->out_rid, data, + frame_type, upriv->reply_count); + usb_fill_bulk_urb(ctx->outurb, upriv->udev, upriv->write_pipe, + ctx->buf, req_size, + ezusb_request_out_callback, ctx); + + if (ctx->in_rid) + upriv->reply_count = ezusb_reply_inc(upriv->reply_count); + + ezusb_req_enqueue_run(upriv, ctx); + + spin_unlock_bh(&upriv->reply_count_lock); + + if (ctx->in_rid) + ezusb_req_ctx_wait(upriv, ctx); + + state = ctx->state; + switch (state) { + case EZUSB_CTX_COMPLETE: + retval = ctx->outurb->status; + break; + + case EZUSB_CTX_QUEUED: + case EZUSB_CTX_REQ_SUBMITTED: + if (!ctx->in_rid) + break; + default: + err("%s: Unexpected context state %d", __func__, + state); + /* fall though */ + case EZUSB_CTX_REQ_TIMEOUT: + case EZUSB_CTX_REQ_FAILED: + case EZUSB_CTX_RESP_TIMEOUT: + case EZUSB_CTX_REQSUBMIT_FAIL: + printk(KERN_ERR PFX "Access failed, resetting (state %d," + " reply_count %d)\n", state, upriv->reply_count); + upriv->reply_count = 0; + if (state == EZUSB_CTX_REQ_TIMEOUT + || state == EZUSB_CTX_RESP_TIMEOUT) { + printk(KERN_ERR PFX "ctx timed out\n"); + retval = -ETIMEDOUT; + } else { + printk(KERN_ERR PFX "ctx failed\n"); + retval = -EFAULT; + } + goto exit; + break; + } + if (ctx->in_rid) { + struct ezusb_packet *ans = ctx->buf; + unsigned exp_len; + + if (ans->hermes_len != 0) + exp_len = le16_to_cpu(ans->hermes_len) * 2 + 12; + else + exp_len = 14; + + if (exp_len != ctx->buf_length) { + err("%s: length mismatch for RID 0x%04x: " + "expected %d, got %d", __func__, + ctx->in_rid, exp_len, ctx->buf_length); + retval = -EIO; + goto exit; + } + + if (ans_buff) + memcpy(ans_buff, ans->data, min(exp_len, ans_size)); + if (ans_length) + *ans_length = le16_to_cpu(ans->hermes_len); + } + exit: + ezusb_request_context_put(ctx); + return retval; +} + +static int ezusb_write_ltv(struct hermes *hw, int bap, u16 rid, + u16 length, const void *data) +{ + struct ezusb_priv *upriv = hw->priv; + u16 frame_type; + struct request_context *ctx; + + if (length == 0) + return -EINVAL; + + length = HERMES_RECLEN_TO_BYTES(length); + + /* On memory mapped devices HERMES_RID_CNFGROUPADDRESSES can be + * set to be empty, but the USB bridge doesn't like it */ + if (length == 0) + return 0; + + ctx = ezusb_alloc_ctx(upriv, rid, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + if (rid == EZUSB_RID_TX) + frame_type = EZUSB_FRAME_DATA; + else + frame_type = EZUSB_FRAME_CONTROL; + + return ezusb_access_ltv(upriv, ctx, length, data, frame_type, + NULL, 0, NULL); +} + +static int ezusb_read_ltv(struct hermes *hw, int bap, u16 rid, + unsigned bufsize, u16 *length, void *buf) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + + if (bufsize % 2) + return -EINVAL; + + ctx = ezusb_alloc_ctx(upriv, rid, rid); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, 0, NULL, EZUSB_FRAME_CONTROL, + buf, bufsize, length); +} + +static int ezusb_doicmd_wait(struct hermes *hw, u16 cmd, u16 parm0, u16 parm1, + u16 parm2, struct hermes_response *resp) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + + __le16 data[4] = { + cpu_to_le16(cmd), + cpu_to_le16(parm0), + cpu_to_le16(parm1), + cpu_to_le16(parm2), + }; + netdev_dbg(upriv->dev, + "0x%04X, parm0 0x%04X, parm1 0x%04X, parm2 0x%04X\n", cmd, + parm0, parm1, parm2); + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_DOCMD, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, sizeof(data), &data, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); +} + +static int ezusb_docmd_wait(struct hermes *hw, u16 cmd, u16 parm0, + struct hermes_response *resp) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + + __le16 data[4] = { + cpu_to_le16(cmd), + cpu_to_le16(parm0), + 0, + 0, + }; + netdev_dbg(upriv->dev, "0x%04X, parm0 0x%04X\n", cmd, parm0); + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_DOCMD, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, sizeof(data), &data, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); +} + +static int ezusb_bap_pread(struct hermes *hw, int bap, + void *buf, int len, u16 id, u16 offset) +{ + struct ezusb_priv *upriv = hw->priv; + struct ezusb_packet *ans = (void *) upriv->read_urb->transfer_buffer; + int actual_length = upriv->read_urb->actual_length; + + if (id == EZUSB_RID_RX) { + if ((sizeof(*ans) + offset + len) > actual_length) { + printk(KERN_ERR PFX "BAP read beyond buffer end " + "in rx frame\n"); + return -EINVAL; + } + memcpy(buf, ans->data + offset, len); + return 0; + } + + if (EZUSB_IS_INFO(id)) { + /* Include 4 bytes for length/type */ + if ((sizeof(*ans) + offset + len - 4) > actual_length) { + printk(KERN_ERR PFX "BAP read beyond buffer end " + "in info frame\n"); + return -EFAULT; + } + memcpy(buf, ans->data + offset - 4, len); + } else { + printk(KERN_ERR PFX "Unexpected fid 0x%04x\n", id); + return -EINVAL; + } + + return 0; +} + +static int ezusb_read_pda(struct hermes *hw, __le16 *pda, + u32 pda_addr, u16 pda_len) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + __le16 data[] = { + cpu_to_le16(pda_addr & 0xffff), + cpu_to_le16(pda_len - 4) + }; + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_READ_PDA, EZUSB_RID_READ_PDA); + if (!ctx) + return -ENOMEM; + + /* wl_lkm does not include PDA size in the PDA area. + * We will pad the information into pda, so other routines + * don't have to be modified */ + pda[0] = cpu_to_le16(pda_len - 2); + /* Includes CFG_PROD_DATA but not itself */ + pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */ + + return ezusb_access_ltv(upriv, ctx, sizeof(data), &data, + EZUSB_FRAME_CONTROL, &pda[2], pda_len - 4, + NULL); +} + +static int ezusb_program_init(struct hermes *hw, u32 entry_point) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + __le32 data = cpu_to_le32(entry_point); + + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_INIT, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, sizeof(data), &data, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); +} + +static int ezusb_program_end(struct hermes *hw) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_END, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, 0, NULL, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); +} + +static int ezusb_program_bytes(struct hermes *hw, const char *buf, + u32 addr, u32 len) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + __le32 data = cpu_to_le32(addr); + int err; + + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_SET_ADDR, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + err = ezusb_access_ltv(upriv, ctx, sizeof(data), &data, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); + if (err) + return err; + + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_BYTES, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, len, buf, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); +} + +static int ezusb_program(struct hermes *hw, const char *buf, + u32 addr, u32 len) +{ + u32 ch_addr; + u32 ch_len; + int err = 0; + + /* We can only send 2048 bytes out of the bulk xmit at a time, + * so we have to split any programming into chunks of <2048 + * bytes. */ + + ch_len = (len < MAX_DL_SIZE) ? len : MAX_DL_SIZE; + ch_addr = addr; + + while (ch_addr < (addr + len)) { + pr_debug("Programming subblock of length %d " + "to address 0x%08x. Data @ %p\n", + ch_len, ch_addr, &buf[ch_addr - addr]); + + err = ezusb_program_bytes(hw, &buf[ch_addr - addr], + ch_addr, ch_len); + if (err) + break; + + ch_addr += ch_len; + ch_len = ((addr + len - ch_addr) < MAX_DL_SIZE) ? + (addr + len - ch_addr) : MAX_DL_SIZE; + } + + return err; +} + +static netdev_tx_t ezusb_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + struct ezusb_priv *upriv = priv->card; + u8 mic[MICHAEL_MIC_LEN + 1]; + int err = 0; + int tx_control; + unsigned long flags; + struct request_context *ctx; + u8 *buf; + int tx_size; + + if (!netif_running(dev)) { + printk(KERN_ERR "%s: Tx on stopped device!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (netif_queue_stopped(dev)) { + printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (orinoco_lock(priv, &flags) != 0) { + printk(KERN_ERR + "%s: ezusb_xmit() called while hw_unavailable\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (!netif_carrier_ok(dev) || + (priv->iw_mode == NL80211_IFTYPE_MONITOR)) { + /* Oops, the firmware hasn't established a connection, + silently drop the packet (this seems to be the + safest approach). */ + goto drop; + } + + /* Check packet length */ + if (skb->len < ETH_HLEN) + goto drop; + + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_TX, 0); + if (!ctx) + goto busy; + + memset(ctx->buf, 0, BULK_BUF_SIZE); + buf = ctx->buf->data; + + tx_control = 0; + + err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control, + &mic[0]); + if (err) + goto drop; + + { + __le16 *tx_cntl = (__le16 *)buf; + *tx_cntl = cpu_to_le16(tx_control); + buf += sizeof(*tx_cntl); + } + + memcpy(buf, skb->data, skb->len); + buf += skb->len; + + if (tx_control & HERMES_TXCTRL_MIC) { + u8 *m = mic; + /* Mic has been offset so it can be copied to an even + * address. We're copying eveything anyway, so we + * don't need to copy that first byte. */ + if (skb->len % 2) + m++; + memcpy(buf, m, MICHAEL_MIC_LEN); + buf += MICHAEL_MIC_LEN; + } + + /* Finally, we actually initiate the send */ + netif_stop_queue(dev); + + /* The card may behave better if we send evenly sized usb transfers */ + tx_size = ALIGN(buf - ctx->buf->data, 2); + + err = ezusb_access_ltv(upriv, ctx, tx_size, NULL, + EZUSB_FRAME_DATA, NULL, 0, NULL); + + if (err) { + netif_start_queue(dev); + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d transmitting packet\n", + dev->name, err); + goto busy; + } + + dev->trans_start = jiffies; + stats->tx_bytes += skb->len; + goto ok; + + drop: + stats->tx_errors++; + stats->tx_dropped++; + + ok: + orinoco_unlock(priv, &flags); + dev_kfree_skb(skb); + return NETDEV_TX_OK; + + busy: + orinoco_unlock(priv, &flags); + return NETDEV_TX_BUSY; +} + +static int ezusb_allocate(struct hermes *hw, u16 size, u16 *fid) +{ + *fid = EZUSB_RID_TX; + return 0; +} + + +static int ezusb_hard_reset(struct orinoco_private *priv) +{ + struct ezusb_priv *upriv = priv->card; + int retval = ezusb_8051_cpucs(upriv, 1); + + if (retval < 0) { + err("Failed to reset"); + return retval; + } + + retval = ezusb_8051_cpucs(upriv, 0); + if (retval < 0) { + err("Failed to unreset"); + return retval; + } + + netdev_dbg(upriv->dev, "sending control message\n"); + retval = usb_control_msg(upriv->udev, + usb_sndctrlpipe(upriv->udev, 0), + EZUSB_REQUEST_TRIGER, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | + USB_DIR_OUT, 0x0, 0x0, NULL, 0, + DEF_TIMEOUT); + if (retval < 0) { + err("EZUSB_REQUEST_TRIGER failed retval %d", retval); + return retval; + } +#if 0 + dbg("Sending EZUSB_REQUEST_TRIG_AC"); + retval = usb_control_msg(upriv->udev, + usb_sndctrlpipe(upriv->udev, 0), + EZUSB_REQUEST_TRIG_AC, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | + USB_DIR_OUT, 0x00FA, 0x0, NULL, 0, + DEF_TIMEOUT); + if (retval < 0) { + err("EZUSB_REQUEST_TRIG_AC failed retval %d", retval); + return retval; + } +#endif + + return 0; +} + + +static int ezusb_init(struct hermes *hw) +{ + struct ezusb_priv *upriv = hw->priv; + int retval; + + BUG_ON(in_interrupt()); + BUG_ON(!upriv); + + upriv->reply_count = 0; + /* Write the MAGIC number on the simulated registers to keep + * orinoco.c happy */ + hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC); + hermes_write_regn(hw, RXFID, EZUSB_RID_RX); + + usb_kill_urb(upriv->read_urb); + ezusb_submit_in_urb(upriv); + + retval = ezusb_write_ltv(hw, 0, EZUSB_RID_INIT1, + HERMES_BYTES_TO_RECLEN(2), "\x10\x00"); + if (retval < 0) { + printk(KERN_ERR PFX "EZUSB_RID_INIT1 error %d\n", retval); + return retval; + } + + retval = ezusb_docmd_wait(hw, HERMES_CMD_INIT, 0, NULL); + if (retval < 0) { + printk(KERN_ERR PFX "HERMES_CMD_INIT error %d\n", retval); + return retval; + } + + return 0; +} + +static void ezusb_bulk_in_callback(struct urb *urb) +{ + struct ezusb_priv *upriv = (struct ezusb_priv *) urb->context; + struct ezusb_packet *ans = urb->transfer_buffer; + u16 crc; + u16 hermes_rid; + + if (upriv->udev == NULL) + return; + + if (urb->status == -ETIMEDOUT) { + /* When a device gets unplugged we get this every time + * we resubmit, flooding the logs. Since we don't use + * USB timeouts, it shouldn't happen any other time*/ + pr_warning("%s: urb timed out, not resubmiting", __func__); + return; + } + if (urb->status == -ECONNABORTED) { + pr_warning("%s: connection abort, resubmiting urb", + __func__); + goto resubmit; + } + if ((urb->status == -EILSEQ) + || (urb->status == -ENOENT) + || (urb->status == -ECONNRESET)) { + netdev_dbg(upriv->dev, "status %d, not resubmiting\n", + urb->status); + return; + } + if (urb->status) + netdev_dbg(upriv->dev, "status: %d length: %d\n", + urb->status, urb->actual_length); + if (urb->actual_length < sizeof(*ans)) { + err("%s: short read, ignoring", __func__); + goto resubmit; + } + crc = build_crc(ans); + if (le16_to_cpu(ans->crc) != crc) { + err("CRC error, ignoring packet"); + goto resubmit; + } + + hermes_rid = le16_to_cpu(ans->hermes_rid); + if ((hermes_rid != EZUSB_RID_RX) && !EZUSB_IS_INFO(hermes_rid)) { + ezusb_request_in_callback(upriv, urb); + } else if (upriv->dev) { + struct net_device *dev = upriv->dev; + struct orinoco_private *priv = ndev_priv(dev); + struct hermes *hw = &priv->hw; + + if (hermes_rid == EZUSB_RID_RX) { + __orinoco_ev_rx(dev, hw); + } else { + hermes_write_regn(hw, INFOFID, + le16_to_cpu(ans->hermes_rid)); + __orinoco_ev_info(dev, hw); + } + } + + resubmit: + if (upriv->udev) + ezusb_submit_in_urb(upriv); +} + +static inline void ezusb_delete(struct ezusb_priv *upriv) +{ + struct net_device *dev; + struct list_head *item; + struct list_head *tmp_item; + unsigned long flags; + + BUG_ON(in_interrupt()); + BUG_ON(!upriv); + + dev = upriv->dev; + mutex_lock(&upriv->mtx); + + upriv->udev = NULL; /* No timer will be rearmed from here */ + + usb_kill_urb(upriv->read_urb); + + spin_lock_irqsave(&upriv->req_lock, flags); + list_for_each_safe(item, tmp_item, &upriv->req_active) { + struct request_context *ctx; + int err; + + ctx = list_entry(item, struct request_context, list); + atomic_inc(&ctx->refcount); + + ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK; + err = usb_unlink_urb(ctx->outurb); + + spin_unlock_irqrestore(&upriv->req_lock, flags); + if (err == -EINPROGRESS) + wait_for_completion(&ctx->done); + + del_timer_sync(&ctx->timer); + /* FIXME: there is an slight chance for the irq handler to + * be running */ + if (!list_empty(&ctx->list)) + ezusb_ctx_complete(ctx); + + ezusb_request_context_put(ctx); + spin_lock_irqsave(&upriv->req_lock, flags); + } + spin_unlock_irqrestore(&upriv->req_lock, flags); + + list_for_each_safe(item, tmp_item, &upriv->req_pending) + ezusb_ctx_complete(list_entry(item, + struct request_context, list)); + + if (upriv->read_urb && upriv->read_urb->status == -EINPROGRESS) + printk(KERN_ERR PFX "Some URB in progress\n"); + + mutex_unlock(&upriv->mtx); + + if (upriv->read_urb) { + kfree(upriv->read_urb->transfer_buffer); + usb_free_urb(upriv->read_urb); + } + kfree(upriv->bap_buf); + if (upriv->dev) { + struct orinoco_private *priv = ndev_priv(upriv->dev); + orinoco_if_del(priv); + free_orinocodev(priv); + } +} + +static void ezusb_lock_irqsave(spinlock_t *lock, + unsigned long *flags) __acquires(lock) +{ + spin_lock_bh(lock); +} + +static void ezusb_unlock_irqrestore(spinlock_t *lock, + unsigned long *flags) __releases(lock) +{ + spin_unlock_bh(lock); +} + +static void ezusb_lock_irq(spinlock_t *lock) __acquires(lock) +{ + spin_lock_bh(lock); +} + +static void ezusb_unlock_irq(spinlock_t *lock) __releases(lock) +{ + spin_unlock_bh(lock); +} + +static const struct hermes_ops ezusb_ops = { + .init = ezusb_init, + .cmd_wait = ezusb_docmd_wait, + .init_cmd_wait = ezusb_doicmd_wait, + .allocate = ezusb_allocate, + .read_ltv = ezusb_read_ltv, + .write_ltv = ezusb_write_ltv, + .bap_pread = ezusb_bap_pread, + .read_pda = ezusb_read_pda, + .program_init = ezusb_program_init, + .program_end = ezusb_program_end, + .program = ezusb_program, + .lock_irqsave = ezusb_lock_irqsave, + .unlock_irqrestore = ezusb_unlock_irqrestore, + .lock_irq = ezusb_lock_irq, + .unlock_irq = ezusb_unlock_irq, +}; + +static const struct net_device_ops ezusb_netdev_ops = { + .ndo_open = orinoco_open, + .ndo_stop = orinoco_stop, + .ndo_start_xmit = ezusb_xmit, + .ndo_set_rx_mode = orinoco_set_multicast_list, + .ndo_change_mtu = orinoco_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_tx_timeout = orinoco_tx_timeout, + .ndo_get_stats = orinoco_get_stats, +}; + +static int ezusb_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct orinoco_private *priv; + struct hermes *hw; + struct ezusb_priv *upriv = NULL; + struct usb_interface_descriptor *iface_desc; + struct usb_endpoint_descriptor *ep; + const struct firmware *fw_entry = NULL; + int retval = 0; + int i; + + priv = alloc_orinocodev(sizeof(*upriv), &udev->dev, + ezusb_hard_reset, NULL); + if (!priv) { + err("Couldn't allocate orinocodev"); + goto exit; + } + + hw = &priv->hw; + + upriv = priv->card; + + mutex_init(&upriv->mtx); + spin_lock_init(&upriv->reply_count_lock); + + spin_lock_init(&upriv->req_lock); + INIT_LIST_HEAD(&upriv->req_pending); + INIT_LIST_HEAD(&upriv->req_active); + + upriv->udev = udev; + + hw->iobase = (void __force __iomem *) &upriv->hermes_reg_fake; + hw->reg_spacing = HERMES_16BIT_REGSPACING; + hw->priv = upriv; + hw->ops = &ezusb_ops; + + /* set up the endpoint information */ + /* check out the endpoints */ + + iface_desc = &interface->altsetting[0].desc; + for (i = 0; i < iface_desc->bNumEndpoints; ++i) { + ep = &interface->altsetting[0].endpoint[i].desc; + + if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) + == USB_DIR_IN) && + ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_BULK)) { + /* we found a bulk in endpoint */ + if (upriv->read_urb != NULL) { + pr_warning("Found a second bulk in ep, ignored"); + continue; + } + + upriv->read_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!upriv->read_urb) { + err("No free urbs available"); + goto error; + } + if (le16_to_cpu(ep->wMaxPacketSize) != 64) + pr_warning("bulk in: wMaxPacketSize!= 64"); + if (ep->bEndpointAddress != (2 | USB_DIR_IN)) + pr_warning("bulk in: bEndpointAddress: %d", + ep->bEndpointAddress); + upriv->read_pipe = usb_rcvbulkpipe(udev, + ep-> + bEndpointAddress); + upriv->read_urb->transfer_buffer = + kmalloc(BULK_BUF_SIZE, GFP_KERNEL); + if (!upriv->read_urb->transfer_buffer) { + err("Couldn't allocate IN buffer"); + goto error; + } + } + + if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) + == USB_DIR_OUT) && + ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_BULK)) { + /* we found a bulk out endpoint */ + if (upriv->bap_buf != NULL) { + pr_warning("Found a second bulk out ep, ignored"); + continue; + } + + if (le16_to_cpu(ep->wMaxPacketSize) != 64) + pr_warning("bulk out: wMaxPacketSize != 64"); + if (ep->bEndpointAddress != 2) + pr_warning("bulk out: bEndpointAddress: %d", + ep->bEndpointAddress); + upriv->write_pipe = usb_sndbulkpipe(udev, + ep-> + bEndpointAddress); + upriv->bap_buf = kmalloc(BULK_BUF_SIZE, GFP_KERNEL); + if (!upriv->bap_buf) { + err("Couldn't allocate bulk_out_buffer"); + goto error; + } + } + } + if (!upriv->bap_buf || !upriv->read_urb) { + err("Didn't find the required bulk endpoints"); + goto error; + } + + if (request_firmware(&fw_entry, "orinoco_ezusb_fw", + &interface->dev) == 0) { + firmware.size = fw_entry->size; + firmware.code = fw_entry->data; + } + if (firmware.size && firmware.code) { + if (ezusb_firmware_download(upriv, &firmware) < 0) + goto error; + } else { + err("No firmware to download"); + goto error; + } + + if (ezusb_hard_reset(priv) < 0) { + err("Cannot reset the device"); + goto error; + } + + /* If the firmware is already downloaded orinoco.c will call + * ezusb_init but if the firmware is not already there, that will make + * the kernel very unstable, so we try initializing here and quit in + * case of error */ + if (ezusb_init(hw) < 0) { + err("Couldn't initialize the device"); + err("Firmware may not be downloaded or may be wrong."); + goto error; + } + + /* Initialise the main driver */ + if (orinoco_init(priv) != 0) { + err("orinoco_init() failed\n"); + goto error; + } + + if (orinoco_if_add(priv, 0, 0, &ezusb_netdev_ops) != 0) { + upriv->dev = NULL; + err("%s: orinoco_if_add() failed", __func__); + goto error; + } + upriv->dev = priv->ndev; + + goto exit; + + error: + ezusb_delete(upriv); + if (upriv->dev) { + /* upriv->dev was 0, so ezusb_delete() didn't free it */ + free_orinocodev(priv); + } + upriv = NULL; + retval = -EFAULT; + exit: + if (fw_entry) { + firmware.code = NULL; + firmware.size = 0; + release_firmware(fw_entry); + } + usb_set_intfdata(interface, upriv); + return retval; +} + + +static void ezusb_disconnect(struct usb_interface *intf) +{ + struct ezusb_priv *upriv = usb_get_intfdata(intf); + usb_set_intfdata(intf, NULL); + ezusb_delete(upriv); + printk(KERN_INFO PFX "Disconnected\n"); +} + + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver orinoco_driver = { + .name = DRIVER_NAME, + .probe = ezusb_probe, + .disconnect = ezusb_disconnect, + .id_table = ezusb_table, + .disable_hub_initiated_lpm = 1, +}; + +module_usb_driver(orinoco_driver); + +MODULE_AUTHOR("Manuel Estrada Sainz"); +MODULE_DESCRIPTION("Driver for Orinoco wireless LAN cards using EZUSB bridge"); +MODULE_LICENSE("Dual MPL/GPL"); diff --git a/drivers/net/wireless/orinoco/scan.c b/drivers/net/wireless/orinoco/scan.c new file mode 100644 index 00000000000..e175b9b8561 --- /dev/null +++ b/drivers/net/wireless/orinoco/scan.c @@ -0,0 +1,249 @@ +/* Helpers for managing scan queues + * + * See copyright notice in main.c + */ + +#include <linux/gfp.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/ieee80211.h> +#include <net/cfg80211.h> + +#include "hermes.h" +#include "orinoco.h" +#include "main.h" + +#include "scan.h" + +#define ZERO_DBM_OFFSET 0x95 +#define MAX_SIGNAL_LEVEL 0x8A +#define MIN_SIGNAL_LEVEL 0x2F + +#define SIGNAL_TO_DBM(x) \ + (clamp_t(s32, (x), MIN_SIGNAL_LEVEL, MAX_SIGNAL_LEVEL) \ + - ZERO_DBM_OFFSET) +#define SIGNAL_TO_MBM(x) (SIGNAL_TO_DBM(x) * 100) + +static int symbol_build_supp_rates(u8 *buf, const __le16 *rates) +{ + int i; + u8 rate; + + buf[0] = WLAN_EID_SUPP_RATES; + for (i = 0; i < 5; i++) { + rate = le16_to_cpu(rates[i]); + /* NULL terminated */ + if (rate == 0x0) + break; + buf[i + 2] = rate; + } + buf[1] = i; + + return i + 2; +} + +static int prism_build_supp_rates(u8 *buf, const u8 *rates) +{ + int i; + + buf[0] = WLAN_EID_SUPP_RATES; + for (i = 0; i < 8; i++) { + /* NULL terminated */ + if (rates[i] == 0x0) + break; + buf[i + 2] = rates[i]; + } + buf[1] = i; + + /* We might still have another 2 rates, which need to go in + * extended supported rates */ + if (i == 8 && rates[i] > 0) { + buf[10] = WLAN_EID_EXT_SUPP_RATES; + for (; i < 10; i++) { + /* NULL terminated */ + if (rates[i] == 0x0) + break; + buf[i + 2] = rates[i]; + } + buf[11] = i - 8; + } + + return (i < 8) ? i + 2 : i + 4; +} + +static void orinoco_add_hostscan_result(struct orinoco_private *priv, + const union hermes_scan_info *bss) +{ + struct wiphy *wiphy = priv_to_wiphy(priv); + struct ieee80211_channel *channel; + struct cfg80211_bss *cbss; + u8 *ie; + u8 ie_buf[46]; + u64 timestamp; + s32 signal; + u16 capability; + u16 beacon_interval; + int ie_len; + int freq; + int len; + + len = le16_to_cpu(bss->a.essid_len); + + /* Reconstruct SSID and bitrate IEs to pass up */ + ie_buf[0] = WLAN_EID_SSID; + ie_buf[1] = len; + memcpy(&ie_buf[2], bss->a.essid, len); + + ie = ie_buf + len + 2; + ie_len = ie_buf[1] + 2; + switch (priv->firmware_type) { + case FIRMWARE_TYPE_SYMBOL: + ie_len += symbol_build_supp_rates(ie, bss->s.rates); + break; + + case FIRMWARE_TYPE_INTERSIL: + ie_len += prism_build_supp_rates(ie, bss->p.rates); + break; + + case FIRMWARE_TYPE_AGERE: + default: + break; + } + + freq = ieee80211_channel_to_frequency( + le16_to_cpu(bss->a.channel), IEEE80211_BAND_2GHZ); + channel = ieee80211_get_channel(wiphy, freq); + if (!channel) { + printk(KERN_DEBUG "Invalid channel designation %04X(%04X)", + bss->a.channel, freq); + return; /* Then ignore it for now */ + } + timestamp = 0; + capability = le16_to_cpu(bss->a.capabilities); + beacon_interval = le16_to_cpu(bss->a.beacon_interv); + signal = SIGNAL_TO_MBM(le16_to_cpu(bss->a.level)); + + cbss = cfg80211_inform_bss(wiphy, channel, bss->a.bssid, timestamp, + capability, beacon_interval, ie_buf, ie_len, + signal, GFP_KERNEL); + cfg80211_put_bss(wiphy, cbss); +} + +void orinoco_add_extscan_result(struct orinoco_private *priv, + struct agere_ext_scan_info *bss, + size_t len) +{ + struct wiphy *wiphy = priv_to_wiphy(priv); + struct ieee80211_channel *channel; + struct cfg80211_bss *cbss; + const u8 *ie; + u64 timestamp; + s32 signal; + u16 capability; + u16 beacon_interval; + size_t ie_len; + int chan, freq; + + ie_len = len - sizeof(*bss); + ie = cfg80211_find_ie(WLAN_EID_DS_PARAMS, bss->data, ie_len); + chan = ie ? ie[2] : 0; + freq = ieee80211_channel_to_frequency(chan, IEEE80211_BAND_2GHZ); + channel = ieee80211_get_channel(wiphy, freq); + + timestamp = le64_to_cpu(bss->timestamp); + capability = le16_to_cpu(bss->capabilities); + beacon_interval = le16_to_cpu(bss->beacon_interval); + ie = bss->data; + signal = SIGNAL_TO_MBM(bss->level); + + cbss = cfg80211_inform_bss(wiphy, channel, bss->bssid, timestamp, + capability, beacon_interval, ie, ie_len, + signal, GFP_KERNEL); + cfg80211_put_bss(wiphy, cbss); +} + +void orinoco_add_hostscan_results(struct orinoco_private *priv, + unsigned char *buf, + size_t len) +{ + int offset; /* In the scan data */ + size_t atom_len; + bool abort = false; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + atom_len = sizeof(struct agere_scan_apinfo); + offset = 0; + break; + + case FIRMWARE_TYPE_SYMBOL: + /* Lack of documentation necessitates this hack. + * Different firmwares have 68 or 76 byte long atoms. + * We try modulo first. If the length divides by both, + * we check what would be the channel in the second + * frame for a 68-byte atom. 76-byte atoms have 0 there. + * Valid channel cannot be 0. */ + if (len % 76) + atom_len = 68; + else if (len % 68) + atom_len = 76; + else if (len >= 1292 && buf[68] == 0) + atom_len = 76; + else + atom_len = 68; + offset = 0; + break; + + case FIRMWARE_TYPE_INTERSIL: + offset = 4; + if (priv->has_hostscan) { + atom_len = le16_to_cpup((__le16 *)buf); + /* Sanity check for atom_len */ + if (atom_len < sizeof(struct prism2_scan_apinfo)) { + printk(KERN_ERR "%s: Invalid atom_len in scan " + "data: %zu\n", priv->ndev->name, + atom_len); + abort = true; + goto scan_abort; + } + } else + atom_len = offsetof(struct prism2_scan_apinfo, atim); + break; + + default: + abort = true; + goto scan_abort; + } + + /* Check that we got an whole number of atoms */ + if ((len - offset) % atom_len) { + printk(KERN_ERR "%s: Unexpected scan data length %zu, " + "atom_len %zu, offset %d\n", priv->ndev->name, len, + atom_len, offset); + abort = true; + goto scan_abort; + } + + /* Process the entries one by one */ + for (; offset + atom_len <= len; offset += atom_len) { + union hermes_scan_info *atom; + + atom = (union hermes_scan_info *) (buf + offset); + + orinoco_add_hostscan_result(priv, atom); + } + + scan_abort: + if (priv->scan_request) { + cfg80211_scan_done(priv->scan_request, abort); + priv->scan_request = NULL; + } +} + +void orinoco_scan_done(struct orinoco_private *priv, bool abort) +{ + if (priv->scan_request) { + cfg80211_scan_done(priv->scan_request, abort); + priv->scan_request = NULL; + } +} diff --git a/drivers/net/wireless/orinoco/scan.h b/drivers/net/wireless/orinoco/scan.h new file mode 100644 index 00000000000..27281fb0a6d --- /dev/null +++ b/drivers/net/wireless/orinoco/scan.h @@ -0,0 +1,21 @@ +/* Helpers for managing scan queues + * + * See copyright notice in main.c + */ +#ifndef _ORINOCO_SCAN_H_ +#define _ORINOCO_SCAN_H_ + +/* Forward declarations */ +struct orinoco_private; +struct agere_ext_scan_info; + +/* Add scan results */ +void orinoco_add_extscan_result(struct orinoco_private *priv, + struct agere_ext_scan_info *atom, + size_t len); +void orinoco_add_hostscan_results(struct orinoco_private *dev, + unsigned char *buf, + size_t len); +void orinoco_scan_done(struct orinoco_private *priv, bool abort); + +#endif /* _ORINOCO_SCAN_H_ */ diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index b2ca2e39c2c..b60048c95e0 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -4,18 +4,18 @@ * Communications and Intel PRO/Wireless 2011B. * * The driver implements Symbol firmware download. The rest is handled - * in hermes.c and orinoco.c. + * in hermes.c and main.c. * * Utilities for downloading the Symbol firmware are available at * http://sourceforge.net/projects/orinoco/ * * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org> * Portions based on orinoco_cs.c: - * Copyright (C) David Gibson, Linuxcare Australia + * Copyright (C) David Gibson, Linuxcare Australia * Portions based on Spectrum24tDnld.c from original spectrum24 driver: - * Copyright (C) Symbol Technologies. + * Copyright (C) Symbol Technologies. * - * See copyright notice in file orinoco.c. + * See copyright notice in file main.c. */ #define DRIVER_NAME "spectrum_cs" @@ -23,10 +23,7 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/delay.h> -#include <pcmcia/cs_types.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -57,7 +54,6 @@ MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket * struct orinoco_private */ struct orinoco_pccard { struct pcmcia_device *p_dev; - dev_node_t node; }; /********************************************************************/ @@ -73,9 +69,6 @@ static void spectrum_cs_release(struct pcmcia_device *link); #define HCR_MEM16 0x10 /* memory width bit, should be preserved */ -#define CS_CHECK(fn, ret) \ - do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - /* * Reset the card using configuration registers COR and CCSR. * If IDLE is 1, stop the firmware, so that it can be safely rewritten. @@ -83,63 +76,55 @@ static void spectrum_cs_release(struct pcmcia_device *link); static int spectrum_reset(struct pcmcia_device *link, int idle) { - int last_ret, last_fn; - conf_reg_t reg; - u_int save_cor; + int ret; + u8 save_cor; + u8 ccsr; /* Doing it if hardware is gone is guaranteed crash */ if (!pcmcia_dev_present(link)) return -ENODEV; /* Save original COR value */ - reg.Function = 0; - reg.Action = CS_READ; - reg.Offset = CISREG_COR; - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); - save_cor = reg.Value; + ret = pcmcia_read_config_byte(link, CISREG_COR, &save_cor); + if (ret) + goto failed; /* Soft-Reset card */ - reg.Action = CS_WRITE; - reg.Offset = CISREG_COR; - reg.Value = (save_cor | COR_SOFT_RESET); - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); + ret = pcmcia_write_config_byte(link, CISREG_COR, + (save_cor | COR_SOFT_RESET)); + if (ret) + goto failed; udelay(1000); /* Read CCSR */ - reg.Action = CS_READ; - reg.Offset = CISREG_CCSR; - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); + ret = pcmcia_read_config_byte(link, CISREG_CCSR, &ccsr); + if (ret) + goto failed; /* * Start or stop the firmware. Memory width bit should be * preserved from the value we've just read. */ - reg.Action = CS_WRITE; - reg.Offset = CISREG_CCSR; - reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16); - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); + ccsr = (idle ? HCR_IDLE : HCR_RUN) | (ccsr & HCR_MEM16); + ret = pcmcia_write_config_byte(link, CISREG_CCSR, ccsr); + if (ret) + goto failed; udelay(1000); /* Restore original COR configuration index */ - reg.Action = CS_WRITE; - reg.Offset = CISREG_COR; - reg.Value = (save_cor & ~COR_SOFT_RESET); - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); + ret = pcmcia_write_config_byte(link, CISREG_COR, + (save_cor & ~COR_SOFT_RESET)); + if (ret) + goto failed; udelay(1000); return 0; - cs_failed: - cs_error(link, last_fn, last_ret); +failed: return -ENODEV; } /********************************************************************/ -/* Device methods */ +/* Device methods */ /********************************************************************/ static int @@ -164,260 +149,124 @@ spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle) } /********************************************************************/ -/* PCMCIA stuff */ +/* PCMCIA stuff */ /********************************************************************/ -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. */ static int spectrum_cs_probe(struct pcmcia_device *link) { - struct net_device *dev; struct orinoco_private *priv; struct orinoco_pccard *card; - dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link), - spectrum_cs_hard_reset, - spectrum_cs_stop_firmware); - if (! dev) + priv = alloc_orinocodev(sizeof(*card), &link->dev, + spectrum_cs_hard_reset, + spectrum_cs_stop_firmware); + if (!priv) return -ENOMEM; - priv = netdev_priv(dev); card = priv->card; /* Link both structures together */ card->p_dev = link; - link->priv = dev; - - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; - link->irq.IRQInfo1 = IRQ_LEVEL_ID; - link->irq.Handler = orinoco_interrupt; - link->irq.Instance = dev; - - /* General socket configuration defaults can go here. In this - * client, we assume very little, and rely on the CIS for - * almost everything. In most clients, many details (i.e., - * number, sizes, and attributes of IO windows) are fixed by - * the nature of the device, and can be hard-wired here. */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; + link->priv = priv; return spectrum_cs_config(link); } /* spectrum_cs_attach */ -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void spectrum_cs_detach(struct pcmcia_device *link) { - struct net_device *dev = link->priv; + struct orinoco_private *priv = link->priv; - if (link->dev_node) - unregister_netdev(dev); + orinoco_if_del(priv); spectrum_cs_release(link); - free_orinocodev(dev); + free_orinocodev(priv); } /* spectrum_cs_detach */ -/* - * spectrum_cs_config() is scheduled to run after a CARD_INSERTION - * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. - */ - static int spectrum_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - goto next_entry; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) - goto next_entry; - } - return 0; + if (p_dev->config_index == 0) + return -EINVAL; -next_entry: - pcmcia_disable_device(p_dev); - return -ENODEV; + return pcmcia_request_io(p_dev); }; static int spectrum_cs_config(struct pcmcia_device *link) { - struct net_device *dev = link->priv; - struct orinoco_private *priv = netdev_priv(dev); - struct orinoco_pccard *card = priv->card; - hermes_t *hw = &priv->hw; - int last_fn, last_ret; + struct orinoco_private *priv = link->priv; + struct hermes *hw = &priv->hw; + int ret; void __iomem *mem; - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ - last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); - if (last_ret) { + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; + ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); + if (ret) { if (!ignore_cis_vcc) printk(KERN_ERR PFX "GetNextTuple(): No matching " "CIS configuration. Maybe you need the " "ignore_cis_vcc=1 parameter.\n"); - cs_error(link, RequestIO, last_ret); goto failed; } - /* - * Allocate an interrupt line. Note that this does not assign - * a handler to the interrupt, unless the 'Handler' member of - * the irq structure is initialized. - */ - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + mem = ioport_map(link->resource[0]->start, + resource_size(link->resource[0])); + if (!mem) + goto failed; /* We initialize the hermes structure before completing PCMCIA * configuration just in case the interrupt handler gets * called. */ - mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); - if (!mem) - goto cs_failed; - hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); + hw->eeprom_pda = true; - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - CS_CHECK(RequestConfiguration, - pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_irq(link, orinoco_interrupt); + if (ret) + goto failed; - /* Ok, we have the configuration, prepare to register the netdev */ - dev->base_addr = link->io.BasePort1; - dev->irq = link->irq.AssignedIRQ; - card->node.major = card->node.minor = 0; + ret = pcmcia_enable_device(link); + if (ret) + goto failed; /* Reset card */ - if (spectrum_cs_hard_reset(priv) != 0) { + if (spectrum_cs_hard_reset(priv) != 0) goto failed; - } - SET_NETDEV_DEV(dev, &handle_to_dev(link)); - /* Tell the stack we exist */ - if (register_netdev(dev) != 0) { - printk(KERN_ERR PFX "register_netdev() failed\n"); + /* Initialise the main driver */ + if (orinoco_init(priv) != 0) { + printk(KERN_ERR PFX "orinoco_init() failed\n"); goto failed; } - /* At this point, the dev_node_t structure(s) needs to be - * initialized and arranged in a linked list at link->dev_node. */ - strcpy(card->node.dev_name, dev->name); - link->dev_node = &card->node; /* link->dev_node being non-NULL is also - used to indicate that the - net_device has been registered */ - - /* Finally, report what we've done */ - printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io " - "0x%04x-0x%04x\n", dev->name, dev_name(dev->dev.parent), - link->irq.AssignedIRQ, link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 - 1); + /* Register an interface with the stack */ + if (orinoco_if_add(priv, link->resource[0]->start, + link->irq, NULL) != 0) { + printk(KERN_ERR PFX "orinoco_if_add() failed\n"); + goto failed; + } return 0; - cs_failed: - cs_error(link, last_fn, last_ret); - failed: spectrum_cs_release(link); return -ENODEV; } /* spectrum_cs_config */ -/* - * After a card is removed, spectrum_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void spectrum_cs_release(struct pcmcia_device *link) { - struct net_device *dev = link->priv; - struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_private *priv = link->priv; unsigned long flags; /* We're committed to taking the device away now, so mark the * hardware as unavailable */ - spin_lock_irqsave(&priv->lock, flags); + priv->hw.ops->lock_irqsave(&priv->lock, &flags); priv->hw_unavailable++; - spin_unlock_irqrestore(&priv->lock, flags); + priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); pcmcia_disable_device(link); if (priv->hw.iobase) @@ -428,23 +277,11 @@ spectrum_cs_release(struct pcmcia_device *link) static int spectrum_cs_suspend(struct pcmcia_device *link) { - struct net_device *dev = link->priv; - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; + struct orinoco_private *priv = link->priv; int err = 0; /* Mark the device as stopped, to block IO until later */ - spin_lock_irqsave(&priv->lock, flags); - - err = __orinoco_down(dev); - if (err) - printk(KERN_WARNING "%s: Error %d downing interface\n", - dev->name, err); - - netif_device_detach(dev); - priv->hw_unavailable++; - - spin_unlock_irqrestore(&priv->lock, flags); + orinoco_down(priv); return err; } @@ -452,33 +289,10 @@ spectrum_cs_suspend(struct pcmcia_device *link) static int spectrum_cs_resume(struct pcmcia_device *link) { - struct net_device *dev = link->priv; - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - int err; - - err = orinoco_reinit_firmware(dev); - if (err) { - printk(KERN_ERR "%s: Error %d re-initializing firmware\n", - dev->name, err); - return -EIO; - } - - spin_lock_irqsave(&priv->lock, flags); + struct orinoco_private *priv = link->priv; + int err = orinoco_up(priv); - netif_device_attach(dev); - priv->hw_unavailable--; - - if (priv->open && !priv->hw_unavailable) { - err = __orinoco_up(dev); - if (err) - printk(KERN_ERR "%s: Error %d restarting card\n", - dev->name, err); - } - - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; + return err; } @@ -486,13 +300,7 @@ spectrum_cs_resume(struct pcmcia_device *link) /* Module initialization */ /********************************************************************/ -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Pavel Roskin <proski@gnu.org>," - " David Gibson <hermes@gibson.dropbear.id.au>, et al)"; - -static struct pcmcia_device_id spectrum_cs_ids[] = { +static const struct pcmcia_device_id spectrum_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4137 */ PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */ PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless LAN PC Card", 0x816cc815, 0x6fbf459a), /* 2011B, not 2011 */ @@ -502,29 +310,11 @@ MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids); static struct pcmcia_driver orinoco_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = spectrum_cs_probe, .remove = spectrum_cs_detach, .suspend = spectrum_cs_suspend, .resume = spectrum_cs_resume, .id_table = spectrum_cs_ids, }; - -static int __init -init_spectrum_cs(void) -{ - printk(KERN_DEBUG "%s\n", version); - - return pcmcia_register_driver(&orinoco_driver); -} - -static void __exit -exit_spectrum_cs(void) -{ - pcmcia_unregister_driver(&orinoco_driver); -} - -module_init(init_spectrum_cs); -module_exit(exit_spectrum_cs); +module_pcmcia_driver(orinoco_driver); diff --git a/drivers/net/wireless/orinoco/wext.c b/drivers/net/wireless/orinoco/wext.c new file mode 100644 index 00000000000..6abdaf0aa05 --- /dev/null +++ b/drivers/net/wireless/orinoco/wext.c @@ -0,0 +1,1413 @@ +/* Wireless extensions support. + * + * See copyright notice in main.c + */ +#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/if_arp.h> +#include <linux/wireless.h> +#include <linux/ieee80211.h> +#include <linux/etherdevice.h> +#include <net/iw_handler.h> +#include <net/cfg80211.h> +#include <net/cfg80211-wext.h> + +#include "hermes.h" +#include "hermes_rid.h" +#include "orinoco.h" + +#include "hw.h" +#include "mic.h" +#include "scan.h" +#include "main.h" + +#include "wext.h" + +#define MAX_RID_LEN 1024 + +/* Helper routine to record keys + * It is called under orinoco_lock so it may not sleep */ +static int orinoco_set_key(struct orinoco_private *priv, int index, + enum orinoco_alg alg, const u8 *key, int key_len, + const u8 *seq, int seq_len) +{ + kzfree(priv->keys[index].key); + kzfree(priv->keys[index].seq); + + if (key_len) { + priv->keys[index].key = kzalloc(key_len, GFP_ATOMIC); + if (!priv->keys[index].key) + goto nomem; + } else + priv->keys[index].key = NULL; + + if (seq_len) { + priv->keys[index].seq = kzalloc(seq_len, GFP_ATOMIC); + if (!priv->keys[index].seq) + goto free_key; + } else + priv->keys[index].seq = NULL; + + priv->keys[index].key_len = key_len; + priv->keys[index].seq_len = seq_len; + + if (key_len) + memcpy((void *)priv->keys[index].key, key, key_len); + if (seq_len) + memcpy((void *)priv->keys[index].seq, seq, seq_len); + + switch (alg) { + case ORINOCO_ALG_TKIP: + priv->keys[index].cipher = WLAN_CIPHER_SUITE_TKIP; + break; + + case ORINOCO_ALG_WEP: + priv->keys[index].cipher = (key_len > SMALL_KEY_SIZE) ? + WLAN_CIPHER_SUITE_WEP104 : WLAN_CIPHER_SUITE_WEP40; + break; + + case ORINOCO_ALG_NONE: + default: + priv->keys[index].cipher = 0; + break; + } + + return 0; + +free_key: + kfree(priv->keys[index].key); + priv->keys[index].key = NULL; + +nomem: + priv->keys[index].key_len = 0; + priv->keys[index].seq_len = 0; + priv->keys[index].cipher = 0; + + return -ENOMEM; +} + +static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct hermes *hw = &priv->hw; + struct iw_statistics *wstats = &priv->wstats; + int err; + unsigned long flags; + + if (!netif_device_present(dev)) { + printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n", + dev->name); + return NULL; /* FIXME: Can we do better than this? */ + } + + /* If busy, return the old stats. Returning NULL may cause + * the interface to disappear from /proc/net/wireless */ + if (orinoco_lock(priv, &flags) != 0) + return wstats; + + /* We can't really wait for the tallies inquiry command to + * complete, so we just use the previous results and trigger + * a new tallies inquiry command for next time - Jean II */ + /* FIXME: Really we should wait for the inquiry to come back - + * as it is the stats we give don't make a whole lot of sense. + * Unfortunately, it's not clear how to do that within the + * wireless extensions framework: I think we're in user + * context, but a lock seems to be held by the time we get in + * here so we're not safe to sleep here. */ + hermes_inquire(hw, HERMES_INQ_TALLIES); + + if (priv->iw_mode == NL80211_IFTYPE_ADHOC) { + memset(&wstats->qual, 0, sizeof(wstats->qual)); + /* If a spy address is defined, we report stats of the + * first spy address - Jean II */ + if (SPY_NUMBER(priv)) { + wstats->qual.qual = priv->spy_data.spy_stat[0].qual; + wstats->qual.level = priv->spy_data.spy_stat[0].level; + wstats->qual.noise = priv->spy_data.spy_stat[0].noise; + wstats->qual.updated = + priv->spy_data.spy_stat[0].updated; + } + } else { + struct { + __le16 qual, signal, noise, unused; + } __packed cq; + + err = HERMES_READ_RECORD(hw, USER_BAP, + HERMES_RID_COMMSQUALITY, &cq); + + if (!err) { + wstats->qual.qual = (int)le16_to_cpu(cq.qual); + wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; + wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; + wstats->qual.updated = + IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; + } + } + + orinoco_unlock(priv, &flags); + return wstats; +} + +/********************************************************************/ +/* Wireless extensions */ +/********************************************************************/ + +static int orinoco_ioctl_setwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int err = -EINPROGRESS; /* Call commit handler */ + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* Enable automatic roaming - no sanity checks are needed */ + if (is_zero_ether_addr(ap_addr->sa_data) || + is_broadcast_ether_addr(ap_addr->sa_data)) { + priv->bssid_fixed = 0; + memset(priv->desired_bssid, 0, ETH_ALEN); + + /* "off" means keep existing connection */ + if (ap_addr->sa_data[0] == 0) { + __orinoco_hw_set_wap(priv); + err = 0; + } + goto out; + } + + if (priv->firmware_type == FIRMWARE_TYPE_AGERE) { + printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't " + "support manual roaming\n", + dev->name); + err = -EOPNOTSUPP; + goto out; + } + + if (priv->iw_mode != NL80211_IFTYPE_STATION) { + printk(KERN_WARNING "%s: Manual roaming supported only in " + "managed mode\n", dev->name); + err = -EOPNOTSUPP; + goto out; + } + + /* Intersil firmware hangs without Desired ESSID */ + if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL && + strlen(priv->desired_essid) == 0) { + printk(KERN_WARNING "%s: Desired ESSID must be set for " + "manual roaming\n", dev->name); + err = -EOPNOTSUPP; + goto out; + } + + /* Finally, enable manual roaming */ + priv->bssid_fixed = 1; + memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN); + + out: + orinoco_unlock(priv, &flags); + return err; +} + +static int orinoco_ioctl_getwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + ap_addr->sa_family = ARPHRD_ETHER; + err = orinoco_hw_get_current_bssid(priv, ap_addr->sa_data); + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_setiwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, + char *keybuf) +{ + struct orinoco_private *priv = ndev_priv(dev); + int index = (erq->flags & IW_ENCODE_INDEX) - 1; + int setindex = priv->tx_key; + enum orinoco_alg encode_alg = priv->encode_alg; + int restricted = priv->wep_restrict; + int err = -EINPROGRESS; /* Call commit handler */ + unsigned long flags; + + if (!priv->has_wep) + return -EOPNOTSUPP; + + if (erq->pointer) { + /* We actually have a key to set - check its length */ + if (erq->length > LARGE_KEY_SIZE) + return -E2BIG; + + if ((erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep) + return -E2BIG; + } + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* Clear any TKIP key we have */ + if ((priv->has_wpa) && (priv->encode_alg == ORINOCO_ALG_TKIP)) + (void) orinoco_clear_tkip_key(priv, setindex); + + if (erq->length > 0) { + if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) + index = priv->tx_key; + + /* Switch on WEP if off */ + if (encode_alg != ORINOCO_ALG_WEP) { + setindex = index; + encode_alg = ORINOCO_ALG_WEP; + } + } else { + /* Important note : if the user do "iwconfig eth0 enc off", + * we will arrive there with an index of -1. This is valid + * but need to be taken care off... Jean II */ + if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) { + if ((index != -1) || (erq->flags == 0)) { + err = -EINVAL; + goto out; + } + } else { + /* Set the index : Check that the key is valid */ + if (priv->keys[index].key_len == 0) { + err = -EINVAL; + goto out; + } + setindex = index; + } + } + + if (erq->flags & IW_ENCODE_DISABLED) + encode_alg = ORINOCO_ALG_NONE; + if (erq->flags & IW_ENCODE_OPEN) + restricted = 0; + if (erq->flags & IW_ENCODE_RESTRICTED) + restricted = 1; + + if (erq->pointer && erq->length > 0) { + err = orinoco_set_key(priv, index, ORINOCO_ALG_WEP, keybuf, + erq->length, NULL, 0); + } + priv->tx_key = setindex; + + /* Try fast key change if connected and only keys are changed */ + if ((priv->encode_alg == encode_alg) && + (priv->wep_restrict == restricted) && + netif_carrier_ok(dev)) { + err = __orinoco_hw_setup_wepkeys(priv); + /* No need to commit if successful */ + goto out; + } + + priv->encode_alg = encode_alg; + priv->wep_restrict = restricted; + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getiwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, + char *keybuf) +{ + struct orinoco_private *priv = ndev_priv(dev); + int index = (erq->flags & IW_ENCODE_INDEX) - 1; + unsigned long flags; + + if (!priv->has_wep) + return -EOPNOTSUPP; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) + index = priv->tx_key; + + erq->flags = 0; + if (!priv->encode_alg) + erq->flags |= IW_ENCODE_DISABLED; + erq->flags |= index + 1; + + if (priv->wep_restrict) + erq->flags |= IW_ENCODE_RESTRICTED; + else + erq->flags |= IW_ENCODE_OPEN; + + erq->length = priv->keys[index].key_len; + + memcpy(keybuf, priv->keys[index].key, erq->length); + + orinoco_unlock(priv, &flags); + return 0; +} + +static int orinoco_ioctl_setessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, + char *essidbuf) +{ + struct orinoco_private *priv = ndev_priv(dev); + unsigned long flags; + + /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it + * anyway... - Jean II */ + + /* Hum... Should not use Wireless Extension constant (may change), + * should use our own... - Jean II */ + if (erq->length > IW_ESSID_MAX_SIZE) + return -E2BIG; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* NULL the string (for NULL termination & ESSID = ANY) - Jean II */ + memset(priv->desired_essid, 0, sizeof(priv->desired_essid)); + + /* If not ANY, get the new ESSID */ + if (erq->flags) + memcpy(priv->desired_essid, essidbuf, erq->length); + + orinoco_unlock(priv, &flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +static int orinoco_ioctl_getessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, + char *essidbuf) +{ + struct orinoco_private *priv = ndev_priv(dev); + int active; + int err = 0; + unsigned long flags; + + if (netif_running(dev)) { + err = orinoco_hw_get_essid(priv, &active, essidbuf); + if (err < 0) + return err; + erq->length = err; + } else { + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE); + erq->length = strlen(priv->desired_essid); + orinoco_unlock(priv, &flags); + } + + erq->flags = 1; + + return 0; +} + +static int orinoco_ioctl_setfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *frq, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int chan = -1; + unsigned long flags; + int err = -EINPROGRESS; /* Call commit handler */ + + /* In infrastructure mode the AP sets the channel */ + if (priv->iw_mode == NL80211_IFTYPE_STATION) + return -EBUSY; + + if ((frq->e == 0) && (frq->m <= 1000)) { + /* Setting by channel number */ + chan = frq->m; + } else { + /* Setting by frequency */ + int denom = 1; + int i; + + /* Calculate denominator to rescale to MHz */ + for (i = 0; i < (6 - frq->e); i++) + denom *= 10; + + chan = ieee80211_frequency_to_channel(frq->m / denom); + } + + if ((chan < 1) || (chan > NUM_CHANNELS) || + !(priv->channel_mask & (1 << (chan - 1)))) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + priv->channel = chan; + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { + /* Fast channel change - no commit if successful */ + struct hermes *hw = &priv->hw; + err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | + HERMES_TEST_SET_CHANNEL, + chan, NULL); + } + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *frq, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int tmp; + + /* Locking done in there */ + tmp = orinoco_hw_get_freq(priv); + if (tmp < 0) + return tmp; + + frq->m = tmp * 100000; + frq->e = 1; + + return 0; +} + +static int orinoco_ioctl_getsens(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *srq, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct hermes *hw = &priv->hw; + u16 val; + int err; + unsigned long flags; + + if (!priv->has_sensitivity) + return -EOPNOTSUPP; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFSYSTEMSCALE, &val); + orinoco_unlock(priv, &flags); + + if (err) + return err; + + srq->value = val; + srq->fixed = 0; /* auto */ + + return 0; +} + +static int orinoco_ioctl_setsens(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *srq, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int val = srq->value; + unsigned long flags; + + if (!priv->has_sensitivity) + return -EOPNOTSUPP; + + if ((val < 1) || (val > 3)) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + priv->ap_density = val; + orinoco_unlock(priv, &flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +static int orinoco_ioctl_setrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int ratemode; + int bitrate; /* 100s of kilobits */ + unsigned long flags; + + /* As the user space doesn't know our highest rate, it uses -1 + * to ask us to set the highest rate. Test it using "iwconfig + * ethX rate auto" - Jean II */ + if (rrq->value == -1) + bitrate = 110; + else { + if (rrq->value % 100000) + return -EINVAL; + bitrate = rrq->value / 100000; + } + + ratemode = orinoco_get_bitratemode(bitrate, !rrq->fixed); + + if (ratemode == -1) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + priv->bitratemode = ratemode; + orinoco_unlock(priv, &flags); + + return -EINPROGRESS; +} + +static int orinoco_ioctl_getrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int err = 0; + int bitrate, automatic; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + orinoco_get_ratemode_cfg(priv->bitratemode, &bitrate, &automatic); + + /* If the interface is running we try to find more about the + current mode */ + if (netif_running(dev)) { + int act_bitrate; + int lerr; + + /* Ignore errors if we can't get the actual bitrate */ + lerr = orinoco_hw_get_act_bitrate(priv, &act_bitrate); + if (!lerr) + bitrate = act_bitrate; + } + + orinoco_unlock(priv, &flags); + + rrq->value = bitrate; + rrq->fixed = !automatic; + rrq->disabled = 0; + + return err; +} + +static int orinoco_ioctl_setpower(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *prq, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int err = -EINPROGRESS; /* Call commit handler */ + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (prq->disabled) { + priv->pm_on = 0; + } else { + switch (prq->flags & IW_POWER_MODE) { + case IW_POWER_UNICAST_R: + priv->pm_mcast = 0; + priv->pm_on = 1; + break; + case IW_POWER_ALL_R: + priv->pm_mcast = 1; + priv->pm_on = 1; + break; + case IW_POWER_ON: + /* No flags : but we may have a value - Jean II */ + break; + default: + err = -EINVAL; + goto out; + } + + if (prq->flags & IW_POWER_TIMEOUT) { + priv->pm_on = 1; + priv->pm_timeout = prq->value / 1000; + } + if (prq->flags & IW_POWER_PERIOD) { + priv->pm_on = 1; + priv->pm_period = prq->value / 1000; + } + /* It's valid to not have a value if we are just toggling + * the flags... Jean II */ + if (!priv->pm_on) { + err = -EINVAL; + goto out; + } + } + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getpower(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *prq, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct hermes *hw = &priv->hw; + int err = 0; + u16 enable, period, timeout, mcast; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMENABLED, &enable); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMAXSLEEPDURATION, &period); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMHOLDOVERDURATION, &timeout); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMULTICASTRECEIVE, &mcast); + if (err) + goto out; + + prq->disabled = !enable; + /* Note : by default, display the period */ + if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { + prq->flags = IW_POWER_TIMEOUT; + prq->value = timeout * 1000; + } else { + prq->flags = IW_POWER_PERIOD; + prq->value = period * 1000; + } + if (mcast) + prq->flags |= IW_POWER_ALL_R; + else + prq->flags |= IW_POWER_UNICAST_R; + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_set_encodeext(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct iw_point *encoding = &wrqu->encoding; + struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; + int idx, alg = ext->alg, set_key = 1; + unsigned long flags; + int err = -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* Determine and validate the key index */ + idx = encoding->flags & IW_ENCODE_INDEX; + if (idx) { + if ((idx < 1) || (idx > 4)) + goto out; + idx--; + } else + idx = priv->tx_key; + + if (encoding->flags & IW_ENCODE_DISABLED) + alg = IW_ENCODE_ALG_NONE; + + if (priv->has_wpa && (alg != IW_ENCODE_ALG_TKIP)) { + /* Clear any TKIP TX key we had */ + (void) orinoco_clear_tkip_key(priv, priv->tx_key); + } + + if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { + priv->tx_key = idx; + set_key = ((alg == IW_ENCODE_ALG_TKIP) || + (ext->key_len > 0)) ? 1 : 0; + } + + if (set_key) { + /* Set the requested key first */ + switch (alg) { + case IW_ENCODE_ALG_NONE: + priv->encode_alg = ORINOCO_ALG_NONE; + err = orinoco_set_key(priv, idx, ORINOCO_ALG_NONE, + NULL, 0, NULL, 0); + break; + + case IW_ENCODE_ALG_WEP: + if (ext->key_len <= 0) + goto out; + + priv->encode_alg = ORINOCO_ALG_WEP; + err = orinoco_set_key(priv, idx, ORINOCO_ALG_WEP, + ext->key, ext->key_len, NULL, 0); + break; + + case IW_ENCODE_ALG_TKIP: + { + u8 *tkip_iv = NULL; + + if (!priv->has_wpa || + (ext->key_len > sizeof(struct orinoco_tkip_key))) + goto out; + + priv->encode_alg = ORINOCO_ALG_TKIP; + + if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) + tkip_iv = &ext->rx_seq[0]; + + err = orinoco_set_key(priv, idx, ORINOCO_ALG_TKIP, + ext->key, ext->key_len, tkip_iv, + ORINOCO_SEQ_LEN); + + err = __orinoco_hw_set_tkip_key(priv, idx, + ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY, + priv->keys[idx].key, + tkip_iv, ORINOCO_SEQ_LEN, NULL, 0); + if (err) + printk(KERN_ERR "%s: Error %d setting TKIP key" + "\n", dev->name, err); + + goto out; + } + default: + goto out; + } + } + err = -EINPROGRESS; + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_get_encodeext(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct iw_point *encoding = &wrqu->encoding; + struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; + int idx, max_key_len; + unsigned long flags; + int err; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = -EINVAL; + max_key_len = encoding->length - sizeof(*ext); + if (max_key_len < 0) + goto out; + + idx = encoding->flags & IW_ENCODE_INDEX; + if (idx) { + if ((idx < 1) || (idx > 4)) + goto out; + idx--; + } else + idx = priv->tx_key; + + encoding->flags = idx + 1; + memset(ext, 0, sizeof(*ext)); + + switch (priv->encode_alg) { + case ORINOCO_ALG_NONE: + ext->alg = IW_ENCODE_ALG_NONE; + ext->key_len = 0; + encoding->flags |= IW_ENCODE_DISABLED; + break; + case ORINOCO_ALG_WEP: + ext->alg = IW_ENCODE_ALG_WEP; + ext->key_len = min(priv->keys[idx].key_len, max_key_len); + memcpy(ext->key, priv->keys[idx].key, ext->key_len); + encoding->flags |= IW_ENCODE_ENABLED; + break; + case ORINOCO_ALG_TKIP: + ext->alg = IW_ENCODE_ALG_TKIP; + ext->key_len = min(priv->keys[idx].key_len, max_key_len); + memcpy(ext->key, priv->keys[idx].key, ext->key_len); + encoding->flags |= IW_ENCODE_ENABLED; + break; + } + + err = 0; + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_set_auth(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct hermes *hw = &priv->hw; + struct iw_param *param = &wrqu->param; + unsigned long flags; + int ret = -EINPROGRESS; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (param->flags & IW_AUTH_INDEX) { + case IW_AUTH_WPA_VERSION: + case IW_AUTH_CIPHER_PAIRWISE: + case IW_AUTH_CIPHER_GROUP: + case IW_AUTH_RX_UNENCRYPTED_EAPOL: + case IW_AUTH_PRIVACY_INVOKED: + case IW_AUTH_DROP_UNENCRYPTED: + /* + * orinoco does not use these parameters + */ + break; + + case IW_AUTH_MFP: + /* Management Frame Protection not supported. + * Only fail if set to required. + */ + if (param->value == IW_AUTH_MFP_REQUIRED) + ret = -EINVAL; + break; + + case IW_AUTH_KEY_MGMT: + /* wl_lkm implies value 2 == PSK for Hermes I + * which ties in with WEXT + * no other hints tho :( + */ + priv->key_mgmt = param->value; + break; + + case IW_AUTH_TKIP_COUNTERMEASURES: + /* When countermeasures are enabled, shut down the + * card; when disabled, re-enable the card. This must + * take effect immediately. + * + * TODO: Make sure that the EAPOL message is getting + * out before card disabled + */ + if (param->value) { + priv->tkip_cm_active = 1; + ret = hermes_disable_port(hw, 0); + } else { + priv->tkip_cm_active = 0; + ret = hermes_enable_port(hw, 0); + } + break; + + case IW_AUTH_80211_AUTH_ALG: + if (param->value & IW_AUTH_ALG_SHARED_KEY) + priv->wep_restrict = 1; + else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) + priv->wep_restrict = 0; + else + ret = -EINVAL; + break; + + case IW_AUTH_WPA_ENABLED: + if (priv->has_wpa) { + priv->wpa_enabled = param->value ? 1 : 0; + } else { + if (param->value) + ret = -EOPNOTSUPP; + /* else silently accept disable of WPA */ + priv->wpa_enabled = 0; + } + break; + + default: + ret = -EOPNOTSUPP; + } + + orinoco_unlock(priv, &flags); + return ret; +} + +static int orinoco_ioctl_get_auth(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct iw_param *param = &wrqu->param; + unsigned long flags; + int ret = 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (param->flags & IW_AUTH_INDEX) { + case IW_AUTH_KEY_MGMT: + param->value = priv->key_mgmt; + break; + + case IW_AUTH_TKIP_COUNTERMEASURES: + param->value = priv->tkip_cm_active; + break; + + case IW_AUTH_80211_AUTH_ALG: + if (priv->wep_restrict) + param->value = IW_AUTH_ALG_SHARED_KEY; + else + param->value = IW_AUTH_ALG_OPEN_SYSTEM; + break; + + case IW_AUTH_WPA_ENABLED: + param->value = priv->wpa_enabled; + break; + + default: + ret = -EOPNOTSUPP; + } + + orinoco_unlock(priv, &flags); + return ret; +} + +static int orinoco_ioctl_set_genie(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + u8 *buf; + unsigned long flags; + + /* cut off at IEEE80211_MAX_DATA_LEN */ + if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) || + (wrqu->data.length && (extra == NULL))) + return -EINVAL; + + if (wrqu->data.length) { + buf = kmemdup(extra, wrqu->data.length, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + } else + buf = NULL; + + if (orinoco_lock(priv, &flags) != 0) { + kfree(buf); + return -EBUSY; + } + + kfree(priv->wpa_ie); + priv->wpa_ie = buf; + priv->wpa_ie_len = wrqu->data.length; + + if (priv->wpa_ie) { + /* Looks like wl_lkm wants to check the auth alg, and + * somehow pass it to the firmware. + * Instead it just calls the key mgmt rid + * - we do this in set auth. + */ + } + + orinoco_unlock(priv, &flags); + return 0; +} + +static int orinoco_ioctl_get_genie(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + unsigned long flags; + int err = 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if ((priv->wpa_ie_len == 0) || (priv->wpa_ie == NULL)) { + wrqu->data.length = 0; + goto out; + } + + if (wrqu->data.length < priv->wpa_ie_len) { + err = -E2BIG; + goto out; + } + + wrqu->data.length = priv->wpa_ie_len; + memcpy(extra, priv->wpa_ie, priv->wpa_ie_len); + +out: + orinoco_unlock(priv, &flags); + return err; +} + +static int orinoco_ioctl_set_mlme(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct iw_mlme *mlme = (struct iw_mlme *)extra; + unsigned long flags; + int ret = 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (mlme->cmd) { + case IW_MLME_DEAUTH: + /* silently ignore */ + break; + + case IW_MLME_DISASSOC: + + ret = orinoco_hw_disassociate(priv, mlme->addr.sa_data, + mlme->reason_code); + break; + + default: + ret = -EOPNOTSUPP; + } + + orinoco_unlock(priv, &flags); + return ret; +} + +static int orinoco_ioctl_reset(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) { + printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name); + + /* Firmware reset */ + orinoco_reset(&priv->reset_work); + } else { + printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name); + + schedule_work(&priv->reset_work); + } + + return 0; +} + +static int orinoco_ioctl_setibssport(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) + +{ + struct orinoco_private *priv = ndev_priv(dev); + int val = *((int *) extra); + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + priv->ibss_port = val; + + /* Actually update the mode we are using */ + set_port_type(priv); + + orinoco_unlock(priv, &flags); + return -EINPROGRESS; /* Call commit handler */ +} + +static int orinoco_ioctl_getibssport(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int *val = (int *) extra; + + *val = priv->ibss_port; + return 0; +} + +static int orinoco_ioctl_setport3(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int val = *((int *) extra); + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (val) { + case 0: /* Try to do IEEE ad-hoc mode */ + if (!priv->has_ibss) { + err = -EINVAL; + break; + } + priv->prefer_port3 = 0; + + break; + + case 1: /* Try to do Lucent proprietary ad-hoc mode */ + if (!priv->has_port3) { + err = -EINVAL; + break; + } + priv->prefer_port3 = 1; + break; + + default: + err = -EINVAL; + } + + if (!err) { + /* Actually update the mode we are using */ + set_port_type(priv); + err = -EINPROGRESS; + } + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getport3(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int *val = (int *) extra; + + *val = priv->prefer_port3; + return 0; +} + +static int orinoco_ioctl_setpreamble(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + unsigned long flags; + int val; + + if (!priv->has_preamble) + return -EOPNOTSUPP; + + /* 802.11b has recently defined some short preamble. + * Basically, the Phy header has been reduced in size. + * This increase performance, especially at high rates + * (the preamble is transmitted at 1Mb/s), unfortunately + * this give compatibility troubles... - Jean II */ + val = *((int *) extra); + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (val) + priv->preamble = 1; + else + priv->preamble = 0; + + orinoco_unlock(priv, &flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +static int orinoco_ioctl_getpreamble(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int *val = (int *) extra; + + if (!priv->has_preamble) + return -EOPNOTSUPP; + + *val = priv->preamble; + return 0; +} + +/* ioctl interface to hermes_read_ltv() + * To use with iwpriv, pass the RID as the token argument, e.g. + * iwpriv get_rid [0xfc00] + * At least Wireless Tools 25 is required to use iwpriv. + * For Wireless Tools 25 and 26 append "dummy" are the end. */ +static int orinoco_ioctl_getrid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct hermes *hw = &priv->hw; + int rid = data->flags; + u16 length; + int err; + unsigned long flags; + + /* It's a "get" function, but we don't want users to access the + * WEP key and other raw firmware data */ + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (rid < 0xfc00 || rid > 0xffff) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hw->ops->read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length, + extra); + if (err) + goto out; + + data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length), + MAX_RID_LEN); + + out: + orinoco_unlock(priv, &flags); + return err; +} + + +/* Commit handler, called after set operations */ +static int orinoco_ioctl_commit(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + unsigned long flags; + int err = 0; + + if (!priv->open) + return 0; + + if (orinoco_lock(priv, &flags) != 0) + return err; + + err = orinoco_commit(priv); + + orinoco_unlock(priv, &flags); + return err; +} + +static const struct iw_priv_args orinoco_privtab[] = { + { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" }, + { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" }, + { SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_port3" }, + { SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_port3" }, + { SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_preamble" }, + { SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_preamble" }, + { SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_ibssport" }, + { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_ibssport" }, + { SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN, + "get_rid" }, +}; + + +/* + * Structures to export the Wireless Handlers + */ + +static const iw_handler orinoco_handler[] = { + IW_HANDLER(SIOCSIWCOMMIT, (iw_handler)orinoco_ioctl_commit), + IW_HANDLER(SIOCGIWNAME, (iw_handler)cfg80211_wext_giwname), + IW_HANDLER(SIOCSIWFREQ, (iw_handler)orinoco_ioctl_setfreq), + IW_HANDLER(SIOCGIWFREQ, (iw_handler)orinoco_ioctl_getfreq), + IW_HANDLER(SIOCSIWMODE, (iw_handler)cfg80211_wext_siwmode), + IW_HANDLER(SIOCGIWMODE, (iw_handler)cfg80211_wext_giwmode), + IW_HANDLER(SIOCSIWSENS, (iw_handler)orinoco_ioctl_setsens), + IW_HANDLER(SIOCGIWSENS, (iw_handler)orinoco_ioctl_getsens), + IW_HANDLER(SIOCGIWRANGE, (iw_handler)cfg80211_wext_giwrange), + IW_HANDLER(SIOCSIWSPY, iw_handler_set_spy), + IW_HANDLER(SIOCGIWSPY, iw_handler_get_spy), + IW_HANDLER(SIOCSIWTHRSPY, iw_handler_set_thrspy), + IW_HANDLER(SIOCGIWTHRSPY, iw_handler_get_thrspy), + IW_HANDLER(SIOCSIWAP, (iw_handler)orinoco_ioctl_setwap), + IW_HANDLER(SIOCGIWAP, (iw_handler)orinoco_ioctl_getwap), + IW_HANDLER(SIOCSIWSCAN, (iw_handler)cfg80211_wext_siwscan), + IW_HANDLER(SIOCGIWSCAN, (iw_handler)cfg80211_wext_giwscan), + IW_HANDLER(SIOCSIWESSID, (iw_handler)orinoco_ioctl_setessid), + IW_HANDLER(SIOCGIWESSID, (iw_handler)orinoco_ioctl_getessid), + IW_HANDLER(SIOCSIWRATE, (iw_handler)orinoco_ioctl_setrate), + IW_HANDLER(SIOCGIWRATE, (iw_handler)orinoco_ioctl_getrate), + IW_HANDLER(SIOCSIWRTS, (iw_handler)cfg80211_wext_siwrts), + IW_HANDLER(SIOCGIWRTS, (iw_handler)cfg80211_wext_giwrts), + IW_HANDLER(SIOCSIWFRAG, (iw_handler)cfg80211_wext_siwfrag), + IW_HANDLER(SIOCGIWFRAG, (iw_handler)cfg80211_wext_giwfrag), + IW_HANDLER(SIOCGIWRETRY, (iw_handler)cfg80211_wext_giwretry), + IW_HANDLER(SIOCSIWENCODE, (iw_handler)orinoco_ioctl_setiwencode), + IW_HANDLER(SIOCGIWENCODE, (iw_handler)orinoco_ioctl_getiwencode), + IW_HANDLER(SIOCSIWPOWER, (iw_handler)orinoco_ioctl_setpower), + IW_HANDLER(SIOCGIWPOWER, (iw_handler)orinoco_ioctl_getpower), + IW_HANDLER(SIOCSIWGENIE, orinoco_ioctl_set_genie), + IW_HANDLER(SIOCGIWGENIE, orinoco_ioctl_get_genie), + IW_HANDLER(SIOCSIWMLME, orinoco_ioctl_set_mlme), + IW_HANDLER(SIOCSIWAUTH, orinoco_ioctl_set_auth), + IW_HANDLER(SIOCGIWAUTH, orinoco_ioctl_get_auth), + IW_HANDLER(SIOCSIWENCODEEXT, orinoco_ioctl_set_encodeext), + IW_HANDLER(SIOCGIWENCODEEXT, orinoco_ioctl_get_encodeext), +}; + + +/* + Added typecasting since we no longer use iwreq_data -- Moustafa + */ +static const iw_handler orinoco_private_handler[] = { + [0] = (iw_handler)orinoco_ioctl_reset, + [1] = (iw_handler)orinoco_ioctl_reset, + [2] = (iw_handler)orinoco_ioctl_setport3, + [3] = (iw_handler)orinoco_ioctl_getport3, + [4] = (iw_handler)orinoco_ioctl_setpreamble, + [5] = (iw_handler)orinoco_ioctl_getpreamble, + [6] = (iw_handler)orinoco_ioctl_setibssport, + [7] = (iw_handler)orinoco_ioctl_getibssport, + [9] = (iw_handler)orinoco_ioctl_getrid, +}; + +const struct iw_handler_def orinoco_handler_def = { + .num_standard = ARRAY_SIZE(orinoco_handler), + .num_private = ARRAY_SIZE(orinoco_private_handler), + .num_private_args = ARRAY_SIZE(orinoco_privtab), + .standard = orinoco_handler, + .private = orinoco_private_handler, + .private_args = orinoco_privtab, + .get_wireless_stats = orinoco_get_wireless_stats, +}; diff --git a/drivers/net/wireless/orinoco/wext.h b/drivers/net/wireless/orinoco/wext.h new file mode 100644 index 00000000000..1479f4e26dd --- /dev/null +++ b/drivers/net/wireless/orinoco/wext.h @@ -0,0 +1,13 @@ +/* Wireless extensions support. + * + * See copyright notice in main.c + */ +#ifndef _ORINOCO_WEXT_H_ +#define _ORINOCO_WEXT_H_ + +#include <net/iw_handler.h> + +/* Structure defining all our WEXT handlers */ +extern const struct iw_handler_def orinoco_handler_def; + +#endif /* _ORINOCO_WEXT_H_ */ |