diff options
Diffstat (limited to 'drivers/net/wireless/orinoco/orinoco_cs.c')
| -rw-r--r-- | drivers/net/wireless/orinoco/orinoco_cs.c | 181 |
1 files changed, 26 insertions, 155 deletions
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index ef46a2d8853..c0a27377d9e 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -15,9 +15,7 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/delay.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -66,7 +64,7 @@ static void orinoco_cs_release(struct pcmcia_device *link); static void orinoco_cs_detach(struct pcmcia_device *p_dev); /********************************************************************/ -/* Device methods */ +/* Device methods */ /********************************************************************/ static int @@ -90,17 +88,9 @@ orinoco_cs_hard_reset(struct orinoco_private *priv) } /********************************************************************/ -/* PCMCIA stuff */ +/* PCMCIA stuff */ /********************************************************************/ -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. */ static int orinoco_cs_probe(struct pcmcia_device *link) { @@ -117,23 +107,9 @@ orinoco_cs_probe(struct pcmcia_device *link) card->p_dev = link; link->priv = priv; - /* General socket configuration defaults can go here. In this - * client, we assume very little, and rely on the CIS for - * almost everything. In most clients, many details (i.e., - * number, sizes, and attributes of IO windows) are fixed by - * the nature of the device, and can be hard-wired here. */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - return orinoco_cs_config(link); } /* orinoco_cs_attach */ -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void orinoco_cs_detach(struct pcmcia_device *link) { struct orinoco_private *priv = link->priv; @@ -145,100 +121,26 @@ static void orinoco_cs_detach(struct pcmcia_device *link) free_orinocodev(priv); } /* orinoco_cs_detach */ -/* - * orinoco_cs_config() is scheduled to run after a CARD_INSERTION - * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. - */ - -static int orinoco_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - goto next_entry; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - goto next_entry; - } - return 0; + if (p_dev->config_index == 0) + return -EINVAL; -next_entry: - pcmcia_disable_device(p_dev); - return -ENODEV; + return pcmcia_request_io(p_dev); }; static int orinoco_cs_config(struct pcmcia_device *link) { struct orinoco_private *priv = link->priv; - hermes_t *hw = &priv->hw; + struct hermes *hw = &priv->hw; int ret; void __iomem *mem; - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); if (ret) { if (!ignore_cis_vcc) @@ -248,26 +150,21 @@ orinoco_cs_config(struct pcmcia_device *link) goto failed; } - ret = pcmcia_request_irq(link, orinoco_interrupt); - if (ret) - goto failed; - - /* We initialize the hermes structure before completing PCMCIA - * configuration just in case the interrupt handler gets - * called. */ mem = ioport_map(link->resource[0]->start, resource_size(link->resource[0])); if (!mem) goto failed; + /* We initialize the hermes structure before completing PCMCIA + * configuration just in case the interrupt handler gets + * called. */ hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_request_irq(link, orinoco_interrupt); + if (ret) + goto failed; + + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -291,11 +188,6 @@ orinoco_cs_config(struct pcmcia_device *link) return -ENODEV; } /* orinoco_cs_config */ -/* - * After a card is removed, orinoco_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void orinoco_cs_release(struct pcmcia_device *link) { @@ -344,15 +236,8 @@ static int orinoco_cs_resume(struct pcmcia_device *link) /* Module initialization */ /********************************************************************/ -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (David Gibson <hermes@gibson.dropbear.id.au>, " - "Pavel Roskin <proski@gnu.org>, et al)"; - -static struct pcmcia_device_id orinoco_cs_ids[] = { +static const struct pcmcia_device_id orinoco_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */ - PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */ PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */ PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */ PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */ @@ -385,6 +270,7 @@ static struct pcmcia_device_id orinoco_cs_ids[] = { PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26), PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b), PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e), + PCMCIA_DEVICE_MANF_CARD_PROD_ID3(0x0156, 0x0002, "Version 01.01", 0xd27deb1a), /* Lucent Orinoco */ #ifdef CONFIG_HERMES_PRISM /* Only entries that certainly identify Prism chipset */ PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */ @@ -434,6 +320,9 @@ static struct pcmcia_device_id orinoco_cs_ids[] = { PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2), PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b), PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39), + + /* This may be Agere or Intersil Firmware */ + PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), #endif PCMCIA_DEVICE_NULL, }; @@ -441,29 +330,11 @@ MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids); static struct pcmcia_driver orinoco_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = orinoco_cs_probe, .remove = orinoco_cs_detach, .id_table = orinoco_cs_ids, .suspend = orinoco_cs_suspend, .resume = orinoco_cs_resume, }; - -static int __init -init_orinoco_cs(void) -{ - printk(KERN_DEBUG "%s\n", version); - - return pcmcia_register_driver(&orinoco_driver); -} - -static void __exit -exit_orinoco_cs(void) -{ - pcmcia_unregister_driver(&orinoco_driver); -} - -module_init(init_orinoco_cs); -module_exit(exit_orinoco_cs); +module_pcmcia_driver(orinoco_driver); |