aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/orinoco/hermes.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/orinoco/hermes.c')
-rw-r--r--drivers/net/wireless/orinoco/hermes.c395
1 files changed, 314 insertions, 81 deletions
diff --git a/drivers/net/wireless/orinoco/hermes.c b/drivers/net/wireless/orinoco/hermes.c
index bfa375369df..43790fbea0e 100644
--- a/drivers/net/wireless/orinoco/hermes.c
+++ b/drivers/net/wireless/orinoco/hermes.c
@@ -15,7 +15,7 @@
*
* Copyright (C) 2000, David Gibson, Linuxcare Australia.
* (C) Copyright David Gibson, IBM Corp. 2001-2003.
- *
+ *
* The contents of this file are subject to the Mozilla Public License
* Version 1.1 (the "License"); you may not use this file except in
* compliance with the License. You may obtain a copy of the License
@@ -40,16 +40,10 @@
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/delay.h>
#include "hermes.h"
-MODULE_DESCRIPTION("Low-level driver helper for Lucent Hermes chipset and Prism II HFA384x wireless MAC controller");
-MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>"
- " & David Gibson <hermes@gibson.dropbear.id.au>");
-MODULE_LICENSE("Dual MPL/GPL");
-
/* These are maximum timeouts. Most often, card wil react much faster */
#define CMD_BUSY_TIMEOUT (100) /* In iterations of ~1us */
#define CMD_INIT_TIMEOUT (50000) /* in iterations of ~10us */
@@ -57,17 +51,37 @@ MODULE_LICENSE("Dual MPL/GPL");
#define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */
/*
+ * AUX port access. To unlock the AUX port write the access keys to the
+ * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL
+ * register. Then read it and make sure it's HERMES_AUX_ENABLED.
+ */
+#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */
+#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */
+#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */
+#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */
+
+#define HERMES_AUX_PW0 0xFE01
+#define HERMES_AUX_PW1 0xDC23
+#define HERMES_AUX_PW2 0xBA45
+
+/* HERMES_CMD_DOWNLD */
+#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD)
+
+/*
* Debugging helpers
*/
#define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \
- printk(stuff);} while (0)
+ printk(stuff); } while (0)
#undef HERMES_DEBUG
#ifdef HERMES_DEBUG
#include <stdarg.h>
-#define DEBUG(lvl, stuff...) if ( (lvl) <= HERMES_DEBUG) DMSG(stuff)
+#define DEBUG(lvl, stuff...) if ((lvl) <= HERMES_DEBUG) DMSG(stuff)
#else /* ! HERMES_DEBUG */
@@ -75,6 +89,7 @@ MODULE_LICENSE("Dual MPL/GPL");
#endif /* ! HERMES_DEBUG */
+static const struct hermes_ops hermes_ops_local;
/*
* Internal functions
@@ -87,7 +102,7 @@ MODULE_LICENSE("Dual MPL/GPL");
Callable from any context.
*/
-static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0,
+static int hermes_issue_cmd(struct hermes *hw, u16 cmd, u16 param0,
u16 param1, u16 param2)
{
int k = CMD_BUSY_TIMEOUT;
@@ -95,20 +110,19 @@ static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0,
/* First wait for the command register to unbusy */
reg = hermes_read_regn(hw, CMD);
- while ( (reg & HERMES_CMD_BUSY) && k ) {
+ while ((reg & HERMES_CMD_BUSY) && k) {
k--;
udelay(1);
reg = hermes_read_regn(hw, CMD);
}
- if (reg & HERMES_CMD_BUSY) {
+ if (reg & HERMES_CMD_BUSY)
return -EBUSY;
- }
hermes_write_regn(hw, PARAM2, param2);
hermes_write_regn(hw, PARAM1, param1);
hermes_write_regn(hw, PARAM0, param0);
hermes_write_regn(hw, CMD, cmd);
-
+
return 0;
}
@@ -117,9 +131,9 @@ static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0,
*/
/* For doing cmds that wipe the magic constant in SWSUPPORT0 */
-int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
- u16 parm0, u16 parm1, u16 parm2,
- struct hermes_response *resp)
+static int hermes_doicmd_wait(struct hermes *hw, u16 cmd,
+ u16 parm0, u16 parm1, u16 parm2,
+ struct hermes_response *resp)
{
int err = 0;
int k;
@@ -169,17 +183,19 @@ int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
out:
return err;
}
-EXPORT_SYMBOL(hermes_doicmd_wait);
-void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing)
+void hermes_struct_init(struct hermes *hw, void __iomem *address,
+ int reg_spacing)
{
hw->iobase = address;
hw->reg_spacing = reg_spacing;
hw->inten = 0x0;
+ hw->eeprom_pda = false;
+ hw->ops = &hermes_ops_local;
}
EXPORT_SYMBOL(hermes_struct_init);
-int hermes_init(hermes_t *hw)
+static int hermes_init(struct hermes *hw)
{
u16 reg;
int err = 0;
@@ -191,23 +207,23 @@ int hermes_init(hermes_t *hw)
hermes_write_regn(hw, EVACK, 0xffff);
/* Normally it's a "can't happen" for the command register to
- be busy when we go to issue a command because we are
- serializing all commands. However we want to have some
- chance of resetting the card even if it gets into a stupid
- state, so we actually wait to see if the command register
- will unbusy itself here. */
+ be busy when we go to issue a command because we are
+ serializing all commands. However we want to have some
+ chance of resetting the card even if it gets into a stupid
+ state, so we actually wait to see if the command register
+ will unbusy itself here. */
k = CMD_BUSY_TIMEOUT;
reg = hermes_read_regn(hw, CMD);
while (k && (reg & HERMES_CMD_BUSY)) {
- if (reg == 0xffff) /* Special case - the card has probably been removed,
- so don't wait for the timeout */
+ if (reg == 0xffff) /* Special case - the card has probably been
+ removed, so don't wait for the timeout */
return -ENODEV;
k--;
udelay(1);
reg = hermes_read_regn(hw, CMD);
}
-
+
/* No need to explicitly handle the timeout - if we've timed
out hermes_issue_cmd() will probably return -EBUSY below */
@@ -223,16 +239,18 @@ int hermes_init(hermes_t *hw)
return err;
}
-EXPORT_SYMBOL(hermes_init);
/* Issue a command to the chip, and (busy!) wait for it to
* complete.
*
- * Returns: < 0 on internal error, 0 on success, > 0 on error returned by the firmware
+ * Returns:
+ * < 0 on internal error
+ * 0 on success
+ * > 0 on error returned by the firmware
*
* Callable from any context, but locking is your problem. */
-int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
- struct hermes_response *resp)
+static int hermes_docmd_wait(struct hermes *hw, u16 cmd, u16 parm0,
+ struct hermes_response *resp)
{
int err;
int k;
@@ -241,13 +259,13 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
err = hermes_issue_cmd(hw, cmd, parm0, 0, 0);
if (err) {
- if (! hermes_present(hw)) {
+ if (!hermes_present(hw)) {
if (net_ratelimit())
printk(KERN_WARNING "hermes @ %p: "
"Card removed while issuing command "
"0x%04x.\n", hw->iobase, cmd);
err = -ENODEV;
- } else
+ } else
if (net_ratelimit())
printk(KERN_ERR "hermes @ %p: "
"Error %d issuing command 0x%04x.\n",
@@ -257,21 +275,21 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
reg = hermes_read_regn(hw, EVSTAT);
k = CMD_COMPL_TIMEOUT;
- while ( (! (reg & HERMES_EV_CMD)) && k) {
+ while ((!(reg & HERMES_EV_CMD)) && k) {
k--;
udelay(10);
reg = hermes_read_regn(hw, EVSTAT);
}
- if (! hermes_present(hw)) {
+ if (!hermes_present(hw)) {
printk(KERN_WARNING "hermes @ %p: Card removed "
"while waiting for command 0x%04x completion.\n",
hw->iobase, cmd);
err = -ENODEV;
goto out;
}
-
- if (! (reg & HERMES_EV_CMD)) {
+
+ if (!(reg & HERMES_EV_CMD)) {
printk(KERN_ERR "hermes @ %p: Timeout waiting for "
"command 0x%04x completion.\n", hw->iobase, cmd);
err = -ETIMEDOUT;
@@ -294,38 +312,36 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
out:
return err;
}
-EXPORT_SYMBOL(hermes_docmd_wait);
-int hermes_allocate(hermes_t *hw, u16 size, u16 *fid)
+static int hermes_allocate(struct hermes *hw, u16 size, u16 *fid)
{
int err = 0;
int k;
u16 reg;
-
- if ( (size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX) )
+
+ if ((size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX))
return -EINVAL;
err = hermes_docmd_wait(hw, HERMES_CMD_ALLOC, size, NULL);
- if (err) {
+ if (err)
return err;
- }
reg = hermes_read_regn(hw, EVSTAT);
k = ALLOC_COMPL_TIMEOUT;
- while ( (! (reg & HERMES_EV_ALLOC)) && k) {
+ while ((!(reg & HERMES_EV_ALLOC)) && k) {
k--;
udelay(10);
reg = hermes_read_regn(hw, EVSTAT);
}
-
- if (! hermes_present(hw)) {
+
+ if (!hermes_present(hw)) {
printk(KERN_WARNING "hermes @ %p: "
"Card removed waiting for frame allocation.\n",
hw->iobase);
return -ENODEV;
}
-
- if (! (reg & HERMES_EV_ALLOC)) {
+
+ if (!(reg & HERMES_EV_ALLOC)) {
printk(KERN_ERR "hermes @ %p: "
"Timeout waiting for frame allocation\n",
hw->iobase);
@@ -334,18 +350,20 @@ int hermes_allocate(hermes_t *hw, u16 size, u16 *fid)
*fid = hermes_read_regn(hw, ALLOCFID);
hermes_write_regn(hw, EVACK, HERMES_EV_ALLOC);
-
+
return 0;
}
-EXPORT_SYMBOL(hermes_allocate);
/* Set up a BAP to read a particular chunk of data from card's internal buffer.
*
- * Returns: < 0 on internal failure (errno), 0 on success, >0 on error
+ * Returns:
+ * < 0 on internal failure (errno)
+ * 0 on success
+ * > 0 on error
* from firmware
*
* Callable from any context */
-static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
+static int hermes_bap_seek(struct hermes *hw, int bap, u16 id, u16 offset)
{
int sreg = bap ? HERMES_SELECT1 : HERMES_SELECT0;
int oreg = bap ? HERMES_OFFSET1 : HERMES_OFFSET0;
@@ -353,7 +371,7 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
u16 reg;
/* Paranoia.. */
- if ( (offset > HERMES_BAP_OFFSET_MAX) || (offset % 2) )
+ if ((offset > HERMES_BAP_OFFSET_MAX) || (offset % 2))
return -EINVAL;
k = HERMES_BAP_BUSY_TIMEOUT;
@@ -374,7 +392,7 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
/* Wait for the BAP to be ready */
k = HERMES_BAP_BUSY_TIMEOUT;
reg = hermes_read_reg(hw, oreg);
- while ( (reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) {
+ while ((reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) {
k--;
udelay(1);
reg = hermes_read_reg(hw, oreg);
@@ -386,9 +404,8 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
(reg & HERMES_OFFSET_BUSY) ? "timeout" : "error",
reg, id, offset);
- if (reg & HERMES_OFFSET_BUSY) {
+ if (reg & HERMES_OFFSET_BUSY)
return -ETIMEDOUT;
- }
return -EIO; /* error or wrong offset */
}
@@ -400,15 +417,18 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
* BAP. Synchronization/serialization is the caller's problem. len
* must be even.
*
- * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
+ * Returns:
+ * < 0 on internal failure (errno)
+ * 0 on success
+ * > 0 on error from firmware
*/
-int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
- u16 id, u16 offset)
+static int hermes_bap_pread(struct hermes *hw, int bap, void *buf, int len,
+ u16 id, u16 offset)
{
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
int err = 0;
- if ( (len < 0) || (len % 2) )
+ if ((len < 0) || (len % 2))
return -EINVAL;
err = hermes_bap_seek(hw, bap, id, offset);
@@ -416,20 +436,22 @@ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
goto out;
/* Actually do the transfer */
- hermes_read_words(hw, dreg, buf, len/2);
+ hermes_read_words(hw, dreg, buf, len / 2);
out:
return err;
}
-EXPORT_SYMBOL(hermes_bap_pread);
/* Write a block of data to the chip's buffer, via the
* BAP. Synchronization/serialization is the caller's problem.
*
- * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
+ * Returns:
+ * < 0 on internal failure (errno)
+ * 0 on success
+ * > 0 on error from firmware
*/
-int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
- u16 id, u16 offset)
+static int hermes_bap_pwrite(struct hermes *hw, int bap, const void *buf,
+ int len, u16 id, u16 offset)
{
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
int err = 0;
@@ -440,14 +462,13 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
err = hermes_bap_seek(hw, bap, id, offset);
if (err)
goto out;
-
+
/* Actually do the transfer */
hermes_write_bytes(hw, dreg, buf, len);
- out:
+ out:
return err;
}
-EXPORT_SYMBOL(hermes_bap_pwrite);
/* Read a Length-Type-Value record from the card.
*
@@ -457,15 +478,15 @@ EXPORT_SYMBOL(hermes_bap_pwrite);
* practice.
*
* Callable from user or bh context. */
-int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize,
- u16 *length, void *buf)
+static int hermes_read_ltv(struct hermes *hw, int bap, u16 rid,
+ unsigned bufsize, u16 *length, void *buf)
{
int err = 0;
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
u16 rlength, rtype;
unsigned nwords;
- if ( (bufsize < 0) || (bufsize % 2) )
+ if (bufsize % 2)
return -EINVAL;
err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL);
@@ -478,7 +499,7 @@ int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize,
rlength = hermes_read_reg(hw, dreg);
- if (! rlength)
+ if (!rlength)
return -ENODATA;
rtype = hermes_read_reg(hw, dreg);
@@ -501,10 +522,9 @@ int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize,
return 0;
}
-EXPORT_SYMBOL(hermes_read_ltv);
-int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
- u16 length, const void *value)
+static int hermes_write_ltv(struct hermes *hw, int bap, u16 rid,
+ u16 length, const void *value)
{
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
int err = 0;
@@ -529,16 +549,229 @@ int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
return err;
}
-EXPORT_SYMBOL(hermes_write_ltv);
-static int __init init_hermes(void)
+/*** Hermes AUX control ***/
+
+static inline void
+hermes_aux_setaddr(struct hermes *hw, u32 addr)
+{
+ hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7));
+ hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F));
+}
+
+static inline int
+hermes_aux_control(struct hermes *hw, int enabled)
+{
+ int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED;
+ int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE;
+ int i;
+
+ /* Already open? */
+ if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state)
+ return 0;
+
+ hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0);
+ hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1);
+ hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2);
+ hermes_write_reg(hw, HERMES_CONTROL, action);
+
+ for (i = 0; i < 20; i++) {
+ udelay(10);
+ if (hermes_read_reg(hw, HERMES_CONTROL) ==
+ desired_state)
+ return 0;
+ }
+
+ return -EBUSY;
+}
+
+/*** Hermes programming ***/
+
+/* About to start programming data (Hermes I)
+ * offset is the entry point
+ *
+ * Spectrum_cs' Symbol fw does not require this
+ * wl_lkm Agere fw does
+ * Don't know about intersil
+ */
+static int hermesi_program_init(struct hermes *hw, u32 offset)
{
+ int err;
+
+ /* Disable interrupts?*/
+ /*hw->inten = 0x0;*/
+ /*hermes_write_regn(hw, INTEN, 0);*/
+ /*hermes_set_irqmask(hw, 0);*/
+
+ /* Acknowledge any outstanding command */
+ hermes_write_regn(hw, EVACK, 0xFFFF);
+
+ /* Using init_cmd_wait rather than cmd_wait */
+ err = hw->ops->init_cmd_wait(hw,
+ 0x0100 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+ if (err)
+ return err;
+
+ err = hw->ops->init_cmd_wait(hw,
+ 0x0000 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+ if (err)
+ return err;
+
+ err = hermes_aux_control(hw, 1);
+ pr_debug("AUX enable returned %d\n", err);
+
+ if (err)
+ return err;
+
+ pr_debug("Enabling volatile, EP 0x%08x\n", offset);
+ err = hw->ops->init_cmd_wait(hw,
+ HERMES_PROGRAM_ENABLE_VOLATILE,
+ offset & 0xFFFFu,
+ offset >> 16,
+ 0,
+ NULL);
+ pr_debug("PROGRAM_ENABLE returned %d\n", err);
+
+ return err;
+}
+
+/* Done programming data (Hermes I)
+ *
+ * Spectrum_cs' Symbol fw does not require this
+ * wl_lkm Agere fw does
+ * Don't know about intersil
+ */
+static int hermesi_program_end(struct hermes *hw)
+{
+ struct hermes_response resp;
+ int rc = 0;
+ int err;
+
+ rc = hw->ops->cmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp);
+
+ pr_debug("PROGRAM_DISABLE returned %d, "
+ "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
+ rc, resp.resp0, resp.resp1, resp.resp2);
+
+ if ((rc == 0) &&
+ ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD))
+ rc = -EIO;
+
+ err = hermes_aux_control(hw, 0);
+ pr_debug("AUX disable returned %d\n", err);
+
+ /* Acknowledge any outstanding command */
+ hermes_write_regn(hw, EVACK, 0xFFFF);
+
+ /* Reinitialise, ignoring return */
+ (void) hw->ops->init_cmd_wait(hw, 0x0000 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+
+ return rc ? rc : err;
+}
+
+static int hermes_program_bytes(struct hermes *hw, const char *data,
+ u32 addr, u32 len)
+{
+ /* wl lkm splits the programming into chunks of 2000 bytes.
+ * This restriction appears to come from USB. The PCMCIA
+ * adapters can program the whole lot in one go */
+ hermes_aux_setaddr(hw, addr);
+ hermes_write_bytes(hw, HERMES_AUXDATA, data, len);
+ return 0;
+}
+
+/* Read PDA from the adapter */
+static int hermes_read_pda(struct hermes *hw, __le16 *pda, u32 pda_addr,
+ u16 pda_len)
+{
+ int ret;
+ u16 pda_size;
+ u16 data_len = pda_len;
+ __le16 *data = pda;
+
+ if (hw->eeprom_pda) {
+ /* PDA of spectrum symbol is in eeprom */
+
+ /* Issue command to read EEPROM */
+ ret = hw->ops->cmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
+ if (ret)
+ return ret;
+ } else {
+ /* wl_lkm does not include PDA size in the PDA area.
+ * We will pad the information into pda, so other routines
+ * don't have to be modified */
+ pda[0] = cpu_to_le16(pda_len - 2);
+ /* Includes CFG_PROD_DATA but not itself */
+ pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
+ data_len = pda_len - 4;
+ data = pda + 2;
+ }
+
+ /* Open auxiliary port */
+ ret = hermes_aux_control(hw, 1);
+ pr_debug("AUX enable returned %d\n", ret);
+ if (ret)
+ return ret;
+
+ /* Read PDA */
+ hermes_aux_setaddr(hw, pda_addr);
+ hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2);
+
+ /* Close aux port */
+ ret = hermes_aux_control(hw, 0);
+ pr_debug("AUX disable returned %d\n", ret);
+
+ /* Check PDA length */
+ pda_size = le16_to_cpu(pda[0]);
+ pr_debug("Actual PDA length %d, Max allowed %d\n",
+ pda_size, pda_len);
+ if (pda_size > pda_len)
+ return -EINVAL;
+
return 0;
}
-static void __exit exit_hermes(void)
+static void hermes_lock_irqsave(spinlock_t *lock,
+ unsigned long *flags) __acquires(lock)
+{
+ spin_lock_irqsave(lock, *flags);
+}
+
+static void hermes_unlock_irqrestore(spinlock_t *lock,
+ unsigned long *flags) __releases(lock)
+{
+ spin_unlock_irqrestore(lock, *flags);
+}
+
+static void hermes_lock_irq(spinlock_t *lock) __acquires(lock)
+{
+ spin_lock_irq(lock);
+}
+
+static void hermes_unlock_irq(spinlock_t *lock) __releases(lock)
{
+ spin_unlock_irq(lock);
}
-module_init(init_hermes);
-module_exit(exit_hermes);
+/* Hermes operations for local buses */
+static const struct hermes_ops hermes_ops_local = {
+ .init = hermes_init,
+ .cmd_wait = hermes_docmd_wait,
+ .init_cmd_wait = hermes_doicmd_wait,
+ .allocate = hermes_allocate,
+ .read_ltv = hermes_read_ltv,
+ .write_ltv = hermes_write_ltv,
+ .bap_pread = hermes_bap_pread,
+ .bap_pwrite = hermes_bap_pwrite,
+ .read_pda = hermes_read_pda,
+ .program_init = hermesi_program_init,
+ .program_end = hermesi_program_end,
+ .program = hermes_program_bytes,
+ .lock_irqsave = hermes_lock_irqsave,
+ .unlock_irqrestore = hermes_unlock_irqrestore,
+ .lock_irq = hermes_lock_irq,
+ .unlock_irq = hermes_unlock_irq,
+};
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-06 18:25:59 +0000