diff options
Diffstat (limited to 'drivers/net/wireless/mwifiex/sdio.h')
| -rw-r--r-- | drivers/net/wireless/mwifiex/sdio.h | 453 |
1 files changed, 453 insertions, 0 deletions
diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h new file mode 100644 index 00000000000..6eea30b43ed --- /dev/null +++ b/drivers/net/wireless/mwifiex/sdio.h @@ -0,0 +1,453 @@ +/* + * Marvell Wireless LAN device driver: SDIO specific definitions + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#ifndef _MWIFIEX_SDIO_H +#define _MWIFIEX_SDIO_H + + +#include <linux/mmc/sdio.h> +#include <linux/mmc/sdio_ids.h> +#include <linux/mmc/sdio_func.h> +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> + +#include "main.h" + +#define SD8786_DEFAULT_FW_NAME "mrvl/sd8786_uapsta.bin" +#define SD8787_DEFAULT_FW_NAME "mrvl/sd8787_uapsta.bin" +#define SD8797_DEFAULT_FW_NAME "mrvl/sd8797_uapsta.bin" +#define SD8897_DEFAULT_FW_NAME "mrvl/sd8897_uapsta.bin" + +#define BLOCK_MODE 1 +#define BYTE_MODE 0 + +#define REG_PORT 0 + +#define MWIFIEX_SDIO_IO_PORT_MASK 0xfffff + +#define MWIFIEX_SDIO_BYTE_MODE_MASK 0x80000000 + +#define SDIO_MPA_ADDR_BASE 0x1000 +#define CTRL_PORT 0 +#define CTRL_PORT_MASK 0x0001 + +#define CMD_PORT_UPLD_INT_MASK (0x1U<<6) +#define CMD_PORT_DNLD_INT_MASK (0x1U<<7) +#define HOST_TERM_CMD53 (0x1U << 2) +#define REG_PORT 0 +#define MEM_PORT 0x10000 +#define CMD_RD_LEN_0 0xB4 +#define CMD_RD_LEN_1 0xB5 +#define CARD_CONFIG_2_1_REG 0xCD +#define CMD53_NEW_MODE (0x1U << 0) +#define CMD_CONFIG_0 0xB8 +#define CMD_PORT_RD_LEN_EN (0x1U << 2) +#define CMD_CONFIG_1 0xB9 +#define CMD_PORT_AUTO_EN (0x1U << 0) +#define CMD_PORT_SLCT 0x8000 +#define UP_LD_CMD_PORT_HOST_INT_STATUS (0x40U) +#define DN_LD_CMD_PORT_HOST_INT_STATUS (0x80U) + +#define MWIFIEX_MP_AGGR_BUF_SIZE_16K (16384) +#define MWIFIEX_MP_AGGR_BUF_SIZE_32K (32768) + +/* Misc. Config Register : Auto Re-enable interrupts */ +#define AUTO_RE_ENABLE_INT BIT(4) + +/* Host Control Registers */ +/* Host Control Registers : I/O port 0 */ +#define IO_PORT_0_REG 0x78 +/* Host Control Registers : I/O port 1 */ +#define IO_PORT_1_REG 0x79 +/* Host Control Registers : I/O port 2 */ +#define IO_PORT_2_REG 0x7A + +/* Host Control Registers : Configuration */ +#define CONFIGURATION_REG 0x00 +/* Host Control Registers : Host power up */ +#define HOST_POWER_UP (0x1U << 1) + +/* Host Control Registers : Host interrupt mask */ +#define HOST_INT_MASK_REG 0x02 +/* Host Control Registers : Upload host interrupt mask */ +#define UP_LD_HOST_INT_MASK (0x1U) +/* Host Control Registers : Download host interrupt mask */ +#define DN_LD_HOST_INT_MASK (0x2U) + +/* Host Control Registers : Host interrupt status */ +#define HOST_INTSTATUS_REG 0x03 +/* Host Control Registers : Upload host interrupt status */ +#define UP_LD_HOST_INT_STATUS (0x1U) +/* Host Control Registers : Download host interrupt status */ +#define DN_LD_HOST_INT_STATUS (0x2U) + +/* Host Control Registers : Host interrupt RSR */ +#define HOST_INT_RSR_REG 0x01 + +/* Host Control Registers : Host interrupt status */ +#define HOST_INT_STATUS_REG 0x28 + +/* Card Control Registers : Card I/O ready */ +#define CARD_IO_READY (0x1U << 3) +/* Card Control Registers : Download card ready */ +#define DN_LD_CARD_RDY (0x1U << 0) + +/* Max retry number of CMD53 write */ +#define MAX_WRITE_IOMEM_RETRY 2 + +/* SDIO Tx aggregation in progress ? */ +#define MP_TX_AGGR_IN_PROGRESS(a) (a->mpa_tx.pkt_cnt > 0) + +/* SDIO Tx aggregation buffer room for next packet ? */ +#define MP_TX_AGGR_BUF_HAS_ROOM(a, len) ((a->mpa_tx.buf_len+len) \ + <= a->mpa_tx.buf_size) + +/* Copy current packet (SDIO Tx aggregation buffer) to SDIO buffer */ +#define MP_TX_AGGR_BUF_PUT(a, payload, pkt_len, port) do { \ + memmove(&a->mpa_tx.buf[a->mpa_tx.buf_len], \ + payload, pkt_len); \ + a->mpa_tx.buf_len += pkt_len; \ + if (!a->mpa_tx.pkt_cnt) \ + a->mpa_tx.start_port = port; \ + if (a->mpa_tx.start_port <= port) \ + a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt)); \ + else \ + a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+ \ + (a->max_ports - \ + a->mp_end_port))); \ + a->mpa_tx.pkt_cnt++; \ +} while (0) + +/* SDIO Tx aggregation limit ? */ +#define MP_TX_AGGR_PKT_LIMIT_REACHED(a) \ + (a->mpa_tx.pkt_cnt == a->mpa_tx.pkt_aggr_limit) + +/* Reset SDIO Tx aggregation buffer parameters */ +#define MP_TX_AGGR_BUF_RESET(a) do { \ + a->mpa_tx.pkt_cnt = 0; \ + a->mpa_tx.buf_len = 0; \ + a->mpa_tx.ports = 0; \ + a->mpa_tx.start_port = 0; \ +} while (0) + +/* SDIO Rx aggregation limit ? */ +#define MP_RX_AGGR_PKT_LIMIT_REACHED(a) \ + (a->mpa_rx.pkt_cnt == a->mpa_rx.pkt_aggr_limit) + +/* SDIO Rx aggregation in progress ? */ +#define MP_RX_AGGR_IN_PROGRESS(a) (a->mpa_rx.pkt_cnt > 0) + +/* SDIO Rx aggregation buffer room for next packet ? */ +#define MP_RX_AGGR_BUF_HAS_ROOM(a, rx_len) \ + ((a->mpa_rx.buf_len+rx_len) <= a->mpa_rx.buf_size) + +/* Reset SDIO Rx aggregation buffer parameters */ +#define MP_RX_AGGR_BUF_RESET(a) do { \ + a->mpa_rx.pkt_cnt = 0; \ + a->mpa_rx.buf_len = 0; \ + a->mpa_rx.ports = 0; \ + a->mpa_rx.start_port = 0; \ +} while (0) + +/* data structure for SDIO MPA TX */ +struct mwifiex_sdio_mpa_tx { + /* multiport tx aggregation buffer pointer */ + u8 *buf; + u32 buf_len; + u32 pkt_cnt; + u32 ports; + u16 start_port; + u8 enabled; + u32 buf_size; + u32 pkt_aggr_limit; +}; + +struct mwifiex_sdio_mpa_rx { + u8 *buf; + u32 buf_len; + u32 pkt_cnt; + u32 ports; + u16 start_port; + + struct sk_buff **skb_arr; + u32 *len_arr; + + u8 enabled; + u32 buf_size; + u32 pkt_aggr_limit; +}; + +int mwifiex_bus_register(void); +void mwifiex_bus_unregister(void); + +struct mwifiex_sdio_card_reg { + u8 start_rd_port; + u8 start_wr_port; + u8 base_0_reg; + u8 base_1_reg; + u8 poll_reg; + u8 host_int_enable; + u8 status_reg_0; + u8 status_reg_1; + u8 sdio_int_mask; + u32 data_port_mask; + u8 max_mp_regs; + u8 rd_bitmap_l; + u8 rd_bitmap_u; + u8 rd_bitmap_1l; + u8 rd_bitmap_1u; + u8 wr_bitmap_l; + u8 wr_bitmap_u; + u8 wr_bitmap_1l; + u8 wr_bitmap_1u; + u8 rd_len_p0_l; + u8 rd_len_p0_u; + u8 card_misc_cfg_reg; +}; + +struct sdio_mmc_card { + struct sdio_func *func; + struct mwifiex_adapter *adapter; + + const char *firmware; + const struct mwifiex_sdio_card_reg *reg; + u8 max_ports; + u8 mp_agg_pkt_limit; + bool supports_sdio_new_mode; + bool has_control_mask; + u16 tx_buf_size; + u32 mp_tx_agg_buf_size; + u32 mp_rx_agg_buf_size; + + u32 mp_rd_bitmap; + u32 mp_wr_bitmap; + + u16 mp_end_port; + u32 mp_data_port_mask; + + u8 curr_rd_port; + u8 curr_wr_port; + + u8 *mp_regs; + + struct mwifiex_sdio_mpa_tx mpa_tx; + struct mwifiex_sdio_mpa_rx mpa_rx; +}; + +struct mwifiex_sdio_device { + const char *firmware; + const struct mwifiex_sdio_card_reg *reg; + u8 max_ports; + u8 mp_agg_pkt_limit; + bool supports_sdio_new_mode; + bool has_control_mask; + u16 tx_buf_size; + u32 mp_tx_agg_buf_size; + u32 mp_rx_agg_buf_size; +}; + +static const struct mwifiex_sdio_card_reg mwifiex_reg_sd87xx = { + .start_rd_port = 1, + .start_wr_port = 1, + .base_0_reg = 0x0040, + .base_1_reg = 0x0041, + .poll_reg = 0x30, + .host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK, + .status_reg_0 = 0x60, + .status_reg_1 = 0x61, + .sdio_int_mask = 0x3f, + .data_port_mask = 0x0000fffe, + .max_mp_regs = 64, + .rd_bitmap_l = 0x04, + .rd_bitmap_u = 0x05, + .wr_bitmap_l = 0x06, + .wr_bitmap_u = 0x07, + .rd_len_p0_l = 0x08, + .rd_len_p0_u = 0x09, + .card_misc_cfg_reg = 0x6c, +}; + +static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8897 = { + .start_rd_port = 0, + .start_wr_port = 0, + .base_0_reg = 0x60, + .base_1_reg = 0x61, + .poll_reg = 0x50, + .host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK | + CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK, + .status_reg_0 = 0xc0, + .status_reg_1 = 0xc1, + .sdio_int_mask = 0xff, + .data_port_mask = 0xffffffff, + .max_mp_regs = 184, + .rd_bitmap_l = 0x04, + .rd_bitmap_u = 0x05, + .rd_bitmap_1l = 0x06, + .rd_bitmap_1u = 0x07, + .wr_bitmap_l = 0x08, + .wr_bitmap_u = 0x09, + .wr_bitmap_1l = 0x0a, + .wr_bitmap_1u = 0x0b, + .rd_len_p0_l = 0x0c, + .rd_len_p0_u = 0x0d, + .card_misc_cfg_reg = 0xcc, +}; + +static const struct mwifiex_sdio_device mwifiex_sdio_sd8786 = { + .firmware = SD8786_DEFAULT_FW_NAME, + .reg = &mwifiex_reg_sd87xx, + .max_ports = 16, + .mp_agg_pkt_limit = 8, + .supports_sdio_new_mode = false, + .has_control_mask = true, + .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K, + .mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K, + .mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K, +}; + +static const struct mwifiex_sdio_device mwifiex_sdio_sd8787 = { + .firmware = SD8787_DEFAULT_FW_NAME, + .reg = &mwifiex_reg_sd87xx, + .max_ports = 16, + .mp_agg_pkt_limit = 8, + .supports_sdio_new_mode = false, + .has_control_mask = true, + .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K, + .mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K, + .mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K, +}; + +static const struct mwifiex_sdio_device mwifiex_sdio_sd8797 = { + .firmware = SD8797_DEFAULT_FW_NAME, + .reg = &mwifiex_reg_sd87xx, + .max_ports = 16, + .mp_agg_pkt_limit = 8, + .supports_sdio_new_mode = false, + .has_control_mask = true, + .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K, + .mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K, + .mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K, +}; + +static const struct mwifiex_sdio_device mwifiex_sdio_sd8897 = { + .firmware = SD8897_DEFAULT_FW_NAME, + .reg = &mwifiex_reg_sd8897, + .max_ports = 32, + .mp_agg_pkt_limit = 16, + .supports_sdio_new_mode = true, + .has_control_mask = false, + .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K, + .mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_32K, + .mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_32K, +}; + +/* + * .cmdrsp_complete handler + */ +static inline int mwifiex_sdio_cmdrsp_complete(struct mwifiex_adapter *adapter, + struct sk_buff *skb) +{ + dev_kfree_skb_any(skb); + return 0; +} + +/* + * .event_complete handler + */ +static inline int mwifiex_sdio_event_complete(struct mwifiex_adapter *adapter, + struct sk_buff *skb) +{ + dev_kfree_skb_any(skb); + return 0; +} + +static inline bool +mp_rx_aggr_port_limit_reached(struct sdio_mmc_card *card) +{ + u8 tmp; + + if (card->curr_rd_port < card->mpa_rx.start_port) { + if (card->supports_sdio_new_mode) + tmp = card->mp_end_port >> 1; + else + tmp = card->mp_agg_pkt_limit; + + if (((card->max_ports - card->mpa_rx.start_port) + + card->curr_rd_port) >= tmp) + return true; + } + + if (!card->supports_sdio_new_mode) + return false; + + if ((card->curr_rd_port - card->mpa_rx.start_port) >= + (card->mp_end_port >> 1)) + return true; + + return false; +} + +static inline bool +mp_tx_aggr_port_limit_reached(struct sdio_mmc_card *card) +{ + u16 tmp; + + if (card->curr_wr_port < card->mpa_tx.start_port) { + if (card->supports_sdio_new_mode) + tmp = card->mp_end_port >> 1; + else + tmp = card->mp_agg_pkt_limit; + + if (((card->max_ports - card->mpa_tx.start_port) + + card->curr_wr_port) >= tmp) + return true; + } + + if (!card->supports_sdio_new_mode) + return false; + + if ((card->curr_wr_port - card->mpa_tx.start_port) >= + (card->mp_end_port >> 1)) + return true; + + return false; +} + +/* Prepare to copy current packet from card to SDIO Rx aggregation buffer */ +static inline void mp_rx_aggr_setup(struct sdio_mmc_card *card, + struct sk_buff *skb, u8 port) +{ + card->mpa_rx.buf_len += skb->len; + + if (!card->mpa_rx.pkt_cnt) + card->mpa_rx.start_port = port; + + if (card->supports_sdio_new_mode) { + card->mpa_rx.ports |= (1 << port); + } else { + if (card->mpa_rx.start_port <= port) + card->mpa_rx.ports |= 1 << (card->mpa_rx.pkt_cnt); + else + card->mpa_rx.ports |= 1 << (card->mpa_rx.pkt_cnt + 1); + } + card->mpa_rx.skb_arr[card->mpa_rx.pkt_cnt] = skb; + card->mpa_rx.len_arr[card->mpa_rx.pkt_cnt] = skb->len; + card->mpa_rx.pkt_cnt++; +} +#endif /* _MWIFIEX_SDIO_H */ |