diff options
Diffstat (limited to 'drivers/net/wireless/libertas/host.h')
| -rw-r--r-- | drivers/net/wireless/libertas/host.h | 1243 |
1 files changed, 940 insertions, 303 deletions
diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h index 7509cc10af3..96726f79a1d 100644 --- a/drivers/net/wireless/libertas/host.h +++ b/drivers/net/wireless/libertas/host.h @@ -1,341 +1,978 @@ -/** - * This file contains definitions of WLAN commands. - */ - -#ifndef _HOST_H_ -#define _HOST_H_ +/* + * This file function prototypes, data structure + * and definitions for all the host/station commands + */ + +#ifndef _LBS_HOST_H_ +#define _LBS_HOST_H_ + +#include "types.h" +#include "defs.h" + +#define DEFAULT_AD_HOC_CHANNEL 6 + +#define CMD_OPTION_WAITFORRSP 0x0002 + +/* Host command IDs */ + +/* + * Return command are almost always the same as the host command, but with + * bit 15 set high. There are a few exceptions, though... + */ +#define CMD_RET(cmd) (0x8000 | cmd) + +/* Return command convention exceptions: */ +#define CMD_RET_802_11_ASSOCIATE 0x8012 + +/* Command codes */ +#define CMD_GET_HW_SPEC 0x0003 +#define CMD_EEPROM_UPDATE 0x0004 +#define CMD_802_11_RESET 0x0005 +#define CMD_802_11_SCAN 0x0006 +#define CMD_802_11_GET_LOG 0x000b +#define CMD_MAC_MULTICAST_ADR 0x0010 +#define CMD_802_11_AUTHENTICATE 0x0011 +#define CMD_802_11_EEPROM_ACCESS 0x0059 +#define CMD_802_11_ASSOCIATE 0x0050 +#define CMD_802_11_SET_WEP 0x0013 +#define CMD_802_11_GET_STAT 0x0014 +#define CMD_802_3_GET_STAT 0x0015 +#define CMD_802_11_SNMP_MIB 0x0016 +#define CMD_MAC_REG_MAP 0x0017 +#define CMD_BBP_REG_MAP 0x0018 +#define CMD_MAC_REG_ACCESS 0x0019 +#define CMD_BBP_REG_ACCESS 0x001a +#define CMD_RF_REG_ACCESS 0x001b +#define CMD_802_11_RADIO_CONTROL 0x001c +#define CMD_802_11_RF_CHANNEL 0x001d +#define CMD_802_11_RF_TX_POWER 0x001e +#define CMD_802_11_RSSI 0x001f +#define CMD_802_11_RF_ANTENNA 0x0020 +#define CMD_802_11_PS_MODE 0x0021 +#define CMD_802_11_DATA_RATE 0x0022 +#define CMD_RF_REG_MAP 0x0023 +#define CMD_802_11_DEAUTHENTICATE 0x0024 +#define CMD_802_11_REASSOCIATE 0x0025 +#define CMD_MAC_CONTROL 0x0028 +#define CMD_802_11_AD_HOC_START 0x002b +#define CMD_802_11_AD_HOC_JOIN 0x002c +#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e +#define CMD_802_11_ENABLE_RSN 0x002f +#define CMD_802_11_SET_AFC 0x003c +#define CMD_802_11_GET_AFC 0x003d +#define CMD_802_11_DEEP_SLEEP 0x003e +#define CMD_802_11_AD_HOC_STOP 0x0040 +#define CMD_802_11_HOST_SLEEP_CFG 0x0043 +#define CMD_802_11_WAKEUP_CONFIRM 0x0044 +#define CMD_802_11_HOST_SLEEP_ACTIVATE 0x0045 +#define CMD_802_11_BEACON_STOP 0x0049 +#define CMD_802_11_MAC_ADDRESS 0x004d +#define CMD_802_11_LED_GPIO_CTRL 0x004e +#define CMD_802_11_BAND_CONFIG 0x0058 +#define CMD_GSPI_BUS_CONFIG 0x005a +#define CMD_802_11D_DOMAIN_INFO 0x005b +#define CMD_802_11_KEY_MATERIAL 0x005e +#define CMD_802_11_SLEEP_PARAMS 0x0066 +#define CMD_802_11_INACTIVITY_TIMEOUT 0x0067 +#define CMD_802_11_SLEEP_PERIOD 0x0068 +#define CMD_802_11_TPC_CFG 0x0072 +#define CMD_802_11_PA_CFG 0x0073 +#define CMD_802_11_FW_WAKE_METHOD 0x0074 +#define CMD_802_11_SUBSCRIBE_EVENT 0x0075 +#define CMD_802_11_RATE_ADAPT_RATESET 0x0076 +#define CMD_802_11_TX_RATE_QUERY 0x007f +#define CMD_GET_TSF 0x0080 +#define CMD_BT_ACCESS 0x0087 +#define CMD_FWT_ACCESS 0x0095 +#define CMD_802_11_MONITOR_MODE 0x0098 +#define CMD_MESH_ACCESS 0x009b +#define CMD_MESH_CONFIG_OLD 0x00a3 +#define CMD_MESH_CONFIG 0x00ac +#define CMD_SET_BOOT2_VER 0x00a5 +#define CMD_FUNC_INIT 0x00a9 +#define CMD_FUNC_SHUTDOWN 0x00aa +#define CMD_802_11_BEACON_CTRL 0x00b0 -/** PUBLIC DEFINITIONS */ -#define DEFAULT_AD_HOC_CHANNEL 6 -#define DEFAULT_AD_HOC_CHANNEL_A 36 +/* For the IEEE Power Save */ +#define PS_MODE_ACTION_ENTER_PS 0x0030 +#define PS_MODE_ACTION_EXIT_PS 0x0031 +#define PS_MODE_ACTION_SLEEP_CONFIRMED 0x0034 -/** IEEE 802.11 oids */ -#define OID_802_11_SSID 0x00008002 -#define OID_802_11_INFRASTRUCTURE_MODE 0x00008008 -#define OID_802_11_FRAGMENTATION_THRESHOLD 0x00008009 -#define OID_802_11_RTS_THRESHOLD 0x0000800A -#define OID_802_11_TX_ANTENNA_SELECTED 0x0000800D -#define OID_802_11_SUPPORTED_RATES 0x0000800E -#define OID_802_11_STATISTICS 0x00008012 -#define OID_802_11_TX_RETRYCOUNT 0x0000801D -#define OID_802_11D_ENABLE 0x00008020 +#define CMD_ENABLE_RSN 0x0001 +#define CMD_DISABLE_RSN 0x0000 -#define cmd_option_waitforrsp 0x0002 +#define CMD_ACT_GET 0x0000 +#define CMD_ACT_SET 0x0001 -/** Host command ID */ -#define cmd_code_dnld 0x0002 -#define cmd_get_hw_spec 0x0003 -#define cmd_eeprom_update 0x0004 -#define cmd_802_11_reset 0x0005 -#define cmd_802_11_scan 0x0006 -#define cmd_802_11_get_log 0x000b -#define cmd_mac_multicast_adr 0x0010 -#define cmd_802_11_authenticate 0x0011 -#define cmd_802_11_eeprom_access 0x0059 -#define cmd_802_11_associate 0x0050 -#define cmd_802_11_set_wep 0x0013 -#define cmd_802_11_get_stat 0x0014 -#define cmd_802_3_get_stat 0x0015 -#define cmd_802_11_snmp_mib 0x0016 -#define cmd_mac_reg_map 0x0017 -#define cmd_bbp_reg_map 0x0018 -#define cmd_mac_reg_access 0x0019 -#define cmd_bbp_reg_access 0x001a -#define cmd_rf_reg_access 0x001b -#define cmd_802_11_radio_control 0x001c -#define cmd_802_11_rf_channel 0x001d -#define cmd_802_11_rf_tx_power 0x001e -#define cmd_802_11_rssi 0x001f -#define cmd_802_11_rf_antenna 0x0020 +/* Define action or option for CMD_802_11_SET_WEP */ +#define CMD_ACT_ADD 0x0002 +#define CMD_ACT_REMOVE 0x0004 -#define cmd_802_11_ps_mode 0x0021 +#define CMD_TYPE_WEP_40_BIT 0x01 +#define CMD_TYPE_WEP_104_BIT 0x02 -#define cmd_802_11_data_rate 0x0022 -#define cmd_rf_reg_map 0x0023 -#define cmd_802_11_deauthenticate 0x0024 -#define cmd_802_11_reassociate 0x0025 -#define cmd_802_11_disassociate 0x0026 -#define cmd_mac_control 0x0028 -#define cmd_802_11_ad_hoc_start 0x002b -#define cmd_802_11_ad_hoc_join 0x002c +#define CMD_NUM_OF_WEP_KEYS 4 -#define cmd_802_11_query_tkip_reply_cntrs 0x002e -#define cmd_802_11_enable_rsn 0x002f -#define cmd_802_11_pairwise_tsc 0x0036 -#define cmd_802_11_group_tsc 0x0037 -#define cmd_802_11_key_material 0x005e +#define CMD_WEP_KEY_INDEX_MASK 0x3fff -#define cmd_802_11_set_afc 0x003c -#define cmd_802_11_get_afc 0x003d +/* Define action or option for CMD_802_11_SCAN */ +#define CMD_BSS_TYPE_BSS 0x0001 +#define CMD_BSS_TYPE_IBSS 0x0002 +#define CMD_BSS_TYPE_ANY 0x0003 -#define cmd_802_11_ad_hoc_stop 0x0040 +/* Define action or option for CMD_802_11_SCAN */ +#define CMD_SCAN_TYPE_ACTIVE 0x0000 +#define CMD_SCAN_TYPE_PASSIVE 0x0001 -#define cmd_802_11_beacon_stop 0x0049 +#define CMD_SCAN_RADIO_TYPE_BG 0 -#define cmd_802_11_mac_address 0x004D -#define cmd_802_11_eeprom_access 0x0059 +#define CMD_SCAN_PROBE_DELAY_TIME 0 -#define cmd_802_11_band_config 0x0058 +/* Define action or option for CMD_MAC_CONTROL */ +#define CMD_ACT_MAC_RX_ON 0x0001 +#define CMD_ACT_MAC_TX_ON 0x0002 +#define CMD_ACT_MAC_LOOPBACK_ON 0x0004 +#define CMD_ACT_MAC_WEP_ENABLE 0x0008 +#define CMD_ACT_MAC_INT_ENABLE 0x0010 +#define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020 +#define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040 +#define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080 +#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100 +#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400 -#define cmd_802_11d_domain_info 0x005b +/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */ +#define CMD_SUBSCRIBE_RSSI_LOW 0x0001 +#define CMD_SUBSCRIBE_SNR_LOW 0x0002 +#define CMD_SUBSCRIBE_FAILCOUNT 0x0004 +#define CMD_SUBSCRIBE_BCNMISS 0x0008 +#define CMD_SUBSCRIBE_RSSI_HIGH 0x0010 +#define CMD_SUBSCRIBE_SNR_HIGH 0x0020 -#define cmd_802_11_sleep_params 0x0066 +#define RADIO_PREAMBLE_LONG 0x00 +#define RADIO_PREAMBLE_SHORT 0x02 +#define RADIO_PREAMBLE_AUTO 0x04 -#define cmd_802_11_inactivity_timeout 0x0067 +/* Define action or option for CMD_802_11_RF_CHANNEL */ +#define CMD_OPT_802_11_RF_CHANNEL_GET 0x00 +#define CMD_OPT_802_11_RF_CHANNEL_SET 0x01 + +/* Define action or option for CMD_802_11_DATA_RATE */ +#define CMD_ACT_SET_TX_AUTO 0x0000 +#define CMD_ACT_SET_TX_FIX_RATE 0x0001 +#define CMD_ACT_GET_TX_RATE 0x0002 + +/* Options for CMD_802_11_FW_WAKE_METHOD */ +#define CMD_WAKE_METHOD_UNCHANGED 0x0000 +#define CMD_WAKE_METHOD_COMMAND_INT 0x0001 +#define CMD_WAKE_METHOD_GPIO 0x0002 + +/* Object IDs for CMD_802_11_SNMP_MIB */ +#define SNMP_MIB_OID_BSS_TYPE 0x0000 +#define SNMP_MIB_OID_OP_RATE_SET 0x0001 +#define SNMP_MIB_OID_BEACON_PERIOD 0x0002 /* Reserved on v9+ */ +#define SNMP_MIB_OID_DTIM_PERIOD 0x0003 /* Reserved on v9+ */ +#define SNMP_MIB_OID_ASSOC_TIMEOUT 0x0004 /* Reserved on v9+ */ +#define SNMP_MIB_OID_RTS_THRESHOLD 0x0005 +#define SNMP_MIB_OID_SHORT_RETRY_LIMIT 0x0006 +#define SNMP_MIB_OID_LONG_RETRY_LIMIT 0x0007 +#define SNMP_MIB_OID_FRAG_THRESHOLD 0x0008 +#define SNMP_MIB_OID_11D_ENABLE 0x0009 +#define SNMP_MIB_OID_11H_ENABLE 0x000A + +/* Define action or option for CMD_BT_ACCESS */ +enum cmd_bt_access_opts { + /* The bt commands start at 5 instead of 1 because the old dft commands + * are mapped to 1-4. These old commands are no longer maintained and + * should not be called. + */ + CMD_ACT_BT_ACCESS_ADD = 5, + CMD_ACT_BT_ACCESS_DEL, + CMD_ACT_BT_ACCESS_LIST, + CMD_ACT_BT_ACCESS_RESET, + CMD_ACT_BT_ACCESS_SET_INVERT, + CMD_ACT_BT_ACCESS_GET_INVERT +}; -#define cmd_802_11_tpc_cfg 0x0072 -#define cmd_802_11_pwr_cfg 0x0073 +/* Define action or option for CMD_FWT_ACCESS */ +enum cmd_fwt_access_opts { + CMD_ACT_FWT_ACCESS_ADD = 1, + CMD_ACT_FWT_ACCESS_DEL, + CMD_ACT_FWT_ACCESS_LOOKUP, + CMD_ACT_FWT_ACCESS_LIST, + CMD_ACT_FWT_ACCESS_LIST_ROUTE, + CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR, + CMD_ACT_FWT_ACCESS_RESET, + CMD_ACT_FWT_ACCESS_CLEANUP, + CMD_ACT_FWT_ACCESS_TIME, +}; -#define cmd_802_11_led_gpio_ctrl 0x004e +/* Define action or option for CMD_802_11_HOST_SLEEP_CFG */ +enum cmd_wol_cfg_opts { + CMD_ACT_ACTION_NONE = 0, + CMD_ACT_SET_WOL_RULE, + CMD_ACT_GET_WOL_RULE, + CMD_ACT_RESET_WOL_RULE, +}; -#define cmd_802_11_subscribe_event 0x0075 +/* Define action or option for CMD_MESH_ACCESS */ +enum cmd_mesh_access_opts { + CMD_ACT_MESH_GET_TTL = 1, + CMD_ACT_MESH_SET_TTL, + CMD_ACT_MESH_GET_STATS, + CMD_ACT_MESH_GET_ANYCAST, + CMD_ACT_MESH_SET_ANYCAST, + CMD_ACT_MESH_SET_LINK_COSTS, + CMD_ACT_MESH_GET_LINK_COSTS, + CMD_ACT_MESH_SET_BCAST_RATE, + CMD_ACT_MESH_GET_BCAST_RATE, + CMD_ACT_MESH_SET_RREQ_DELAY, + CMD_ACT_MESH_GET_RREQ_DELAY, + CMD_ACT_MESH_SET_ROUTE_EXP, + CMD_ACT_MESH_GET_ROUTE_EXP, + CMD_ACT_MESH_SET_AUTOSTART_ENABLED, + CMD_ACT_MESH_GET_AUTOSTART_ENABLED, + CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17, +}; -#define cmd_802_11_rate_adapt_rateset 0x0076 +/* Define actions and types for CMD_MESH_CONFIG */ +enum cmd_mesh_config_actions { + CMD_ACT_MESH_CONFIG_STOP = 0, + CMD_ACT_MESH_CONFIG_START, + CMD_ACT_MESH_CONFIG_SET, + CMD_ACT_MESH_CONFIG_GET, +}; -#define cmd_802_11_tx_rate_query 0x007f +enum cmd_mesh_config_types { + CMD_TYPE_MESH_SET_BOOTFLAG = 1, + CMD_TYPE_MESH_SET_BOOTTIME, + CMD_TYPE_MESH_SET_DEF_CHANNEL, + CMD_TYPE_MESH_SET_MESH_IE, + CMD_TYPE_MESH_GET_DEFAULTS, + CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */ +}; -#define cmd_get_tsf 0x0080 +/* Card Event definition */ +#define MACREG_INT_CODE_TX_PPA_FREE 0 +#define MACREG_INT_CODE_TX_DMA_DONE 1 +#define MACREG_INT_CODE_LINK_LOST_W_SCAN 2 +#define MACREG_INT_CODE_LINK_LOST_NO_SCAN 3 +#define MACREG_INT_CODE_LINK_SENSED 4 +#define MACREG_INT_CODE_CMD_FINISHED 5 +#define MACREG_INT_CODE_MIB_CHANGED 6 +#define MACREG_INT_CODE_INIT_DONE 7 +#define MACREG_INT_CODE_DEAUTHENTICATED 8 +#define MACREG_INT_CODE_DISASSOCIATED 9 +#define MACREG_INT_CODE_PS_AWAKE 10 +#define MACREG_INT_CODE_PS_SLEEP 11 +#define MACREG_INT_CODE_MIC_ERR_MULTICAST 13 +#define MACREG_INT_CODE_MIC_ERR_UNICAST 14 +#define MACREG_INT_CODE_WM_AWAKE 15 +#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE 16 +#define MACREG_INT_CODE_ADHOC_BCN_LOST 17 +#define MACREG_INT_CODE_HOST_AWAKE 18 +#define MACREG_INT_CODE_STOP_TX 19 +#define MACREG_INT_CODE_START_TX 20 +#define MACREG_INT_CODE_CHANNEL_SWITCH 21 +#define MACREG_INT_CODE_MEASUREMENT_RDY 22 +#define MACREG_INT_CODE_WMM_CHANGE 23 +#define MACREG_INT_CODE_BG_SCAN_REPORT 24 +#define MACREG_INT_CODE_RSSI_LOW 25 +#define MACREG_INT_CODE_SNR_LOW 26 +#define MACREG_INT_CODE_MAX_FAIL 27 +#define MACREG_INT_CODE_RSSI_HIGH 28 +#define MACREG_INT_CODE_SNR_HIGH 29 +#define MACREG_INT_CODE_MESH_AUTO_STARTED 35 +#define MACREG_INT_CODE_FIRMWARE_READY 48 + + +/* 802.11-related definitions */ + +/* TxPD descriptor */ +struct txpd { + /* union to cope up with later FW revisions */ + union { + /* Current Tx packet status */ + __le32 tx_status; + struct { + /* BSS type: client, AP, etc. */ + u8 bss_type; + /* BSS number */ + u8 bss_num; + /* Reserved */ + __le16 reserved; + } bss; + } u; + /* Tx control */ + __le32 tx_control; + __le32 tx_packet_location; + /* Tx packet length */ + __le16 tx_packet_length; + /* First 2 byte of destination MAC address */ + u8 tx_dest_addr_high[2]; + /* Last 4 byte of destination MAC address */ + u8 tx_dest_addr_low[4]; + /* Pkt Priority */ + u8 priority; + /* Pkt Trasnit Power control */ + u8 powermgmt; + /* Amount of time the packet has been queued (units = 2ms) */ + u8 pktdelay_2ms; + /* reserved */ + u8 reserved1; +} __packed; + +/* RxPD Descriptor */ +struct rxpd { + /* union to cope up with later FW revisions */ + union { + /* Current Rx packet status */ + __le16 status; + struct { + /* BSS type: client, AP, etc. */ + u8 bss_type; + /* BSS number */ + u8 bss_num; + } __packed bss; + } __packed u; + + /* SNR */ + u8 snr; + + /* Tx control */ + u8 rx_control; + + /* Pkt length */ + __le16 pkt_len; + + /* Noise Floor */ + u8 nf; + + /* Rx Packet Rate */ + u8 rx_rate; + + /* Pkt addr */ + __le32 pkt_ptr; + + /* Next Rx RxPD addr */ + __le32 next_rxpd_ptr; + + /* Pkt Priority */ + u8 priority; + u8 reserved[3]; +} __packed; + +struct cmd_header { + __le16 command; + __le16 size; + __le16 seqnum; + __le16 result; +} __packed; + +/* Generic structure to hold all key types. */ +struct enc_key { + u16 len; + u16 flags; /* KEY_INFO_* from defs.h */ + u16 type; /* KEY_TYPE_* from defs.h */ + u8 key[32]; +}; -#define cmd_bt_access 0x0087 -#define cmd_ret_bt_access 0x8087 +/* lbs_offset_value */ +struct lbs_offset_value { + u32 offset; + u32 value; +} __packed; + +#define MAX_11D_TRIPLETS 83 + +struct mrvl_ie_domain_param_set { + struct mrvl_ie_header header; + + u8 country_code[IEEE80211_COUNTRY_STRING_LEN]; + struct ieee80211_country_ie_triplet triplet[MAX_11D_TRIPLETS]; +} __packed; + +struct cmd_ds_802_11d_domain_info { + struct cmd_header hdr; + + __le16 action; + struct mrvl_ie_domain_param_set domain; +} __packed; + +/* + * Define data structure for CMD_GET_HW_SPEC + * This structure defines the response for the GET_HW_SPEC command + */ +struct cmd_ds_get_hw_spec { + struct cmd_header hdr; + + /* HW Interface version number */ + __le16 hwifversion; + /* HW version number */ + __le16 version; + /* Max number of TxPD FW can handle */ + __le16 nr_txpd; + /* Max no of Multicast address */ + __le16 nr_mcast_adr; + /* MAC address */ + u8 permanentaddr[6]; + + /* region Code */ + __le16 regioncode; + + /* Number of antenna used */ + __le16 nr_antenna; + + /* FW release number, example 0x01030304 = 2.3.4p1 */ + __le32 fwrelease; + + /* Base Address of TxPD queue */ + __le32 wcb_base; + /* Read Pointer of RxPd queue */ + __le32 rxpd_rdptr; + + /* Write Pointer of RxPd queue */ + __le32 rxpd_wrptr; + + /*FW/HW capability */ + __le32 fwcapinfo; +} __packed; + +struct cmd_ds_802_11_subscribe_event { + struct cmd_header hdr; + + __le16 action; + __le16 events; + + /* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a + * number of TLVs. From the v5.1 manual, those TLVs would add up to + * 40 bytes. However, future firmware might add additional TLVs, so I + * bump this up a bit. + */ + uint8_t tlv[128]; +} __packed; + +/* + * This scan handle Country Information IE(802.11d compliant) + * Define data structure for CMD_802_11_SCAN + */ +struct cmd_ds_802_11_scan { + struct cmd_header hdr; + + uint8_t bsstype; + uint8_t bssid[ETH_ALEN]; + uint8_t tlvbuffer[0]; +} __packed; + +struct cmd_ds_802_11_scan_rsp { + struct cmd_header hdr; + + __le16 bssdescriptsize; + uint8_t nr_sets; + uint8_t bssdesc_and_tlvbuffer[0]; +} __packed; + +struct cmd_ds_802_11_get_log { + struct cmd_header hdr; + + __le32 mcasttxframe; + __le32 failed; + __le32 retry; + __le32 multiretry; + __le32 framedup; + __le32 rtssuccess; + __le32 rtsfailure; + __le32 ackfailure; + __le32 rxfrag; + __le32 mcastrxframe; + __le32 fcserror; + __le32 txframe; + __le32 wepundecryptable; +} __packed; + +struct cmd_ds_mac_control { + struct cmd_header hdr; + __le16 action; + u16 reserved; +} __packed; + +struct cmd_ds_mac_multicast_adr { + struct cmd_header hdr; + __le16 action; + __le16 nr_of_adrs; + u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE]; +} __packed; + +struct cmd_ds_802_11_authenticate { + struct cmd_header hdr; + + u8 bssid[ETH_ALEN]; + u8 authtype; + u8 reserved[10]; +} __packed; + +struct cmd_ds_802_11_deauthenticate { + struct cmd_header hdr; + + u8 macaddr[ETH_ALEN]; + __le16 reasoncode; +} __packed; + +struct cmd_ds_802_11_associate { + struct cmd_header hdr; + + u8 bssid[6]; + __le16 capability; + __le16 listeninterval; + __le16 bcnperiod; + u8 dtimperiod; + u8 iebuf[512]; /* Enough for required and most optional IEs */ +} __packed; + +struct cmd_ds_802_11_associate_response { + struct cmd_header hdr; + + __le16 capability; + __le16 statuscode; + __le16 aid; + u8 iebuf[512]; +} __packed; + +struct cmd_ds_802_11_set_wep { + struct cmd_header hdr; + + /* ACT_ADD, ACT_REMOVE or ACT_ENABLE */ + __le16 action; + + /* key Index selected for Tx */ + __le16 keyindex; + + /* 40, 128bit or TXWEP */ + uint8_t keytype[4]; + uint8_t keymaterial[4][16]; +} __packed; + +struct cmd_ds_802_11_snmp_mib { + struct cmd_header hdr; + + __le16 action; + __le16 oid; + __le16 bufsize; + u8 value[128]; +} __packed; + +struct cmd_ds_reg_access { + struct cmd_header hdr; + + __le16 action; + __le16 offset; + union { + u8 bbp_rf; /* for BBP and RF registers */ + __le32 mac; /* for MAC registers */ + } value; +} __packed; + +struct cmd_ds_802_11_radio_control { + struct cmd_header hdr; + + __le16 action; + __le16 control; +} __packed; + +struct cmd_ds_802_11_beacon_control { + struct cmd_header hdr; + + __le16 action; + __le16 beacon_enable; + __le16 beacon_period; +} __packed; + +struct cmd_ds_802_11_sleep_params { + struct cmd_header hdr; -#define cmd_fwt_access 0x0095 -#define cmd_ret_fwt_access 0x8095 + /* ACT_GET/ACT_SET */ + __le16 action; + + /* Sleep clock error in ppm */ + __le16 error; -#define cmd_mesh_access 0x009b -#define cmd_ret_mesh_access 0x809b + /* Wakeup offset in usec */ + __le16 offset; -/* For the IEEE Power Save */ -#define cmd_subcmd_enter_ps 0x0030 -#define cmd_subcmd_exit_ps 0x0031 -#define cmd_subcmd_sleep_confirmed 0x0034 -#define cmd_subcmd_full_powerdown 0x0035 -#define cmd_subcmd_full_powerup 0x0036 + /* Clock stabilization time in usec */ + __le16 stabletime; -/* command RET code, MSB is set to 1 */ -#define cmd_ret_hw_spec_info 0x8003 -#define cmd_ret_eeprom_update 0x8004 -#define cmd_ret_802_11_reset 0x8005 -#define cmd_ret_802_11_scan 0x8006 -#define cmd_ret_802_11_get_log 0x800b -#define cmd_ret_mac_control 0x8028 -#define cmd_ret_mac_multicast_adr 0x8010 -#define cmd_ret_802_11_authenticate 0x8011 -#define cmd_ret_802_11_deauthenticate 0x8024 -#define cmd_ret_802_11_associate 0x8012 -#define cmd_ret_802_11_reassociate 0x8025 -#define cmd_ret_802_11_disassociate 0x8026 -#define cmd_ret_802_11_set_wep 0x8013 -#define cmd_ret_802_11_stat 0x8014 -#define cmd_ret_802_3_stat 0x8015 -#define cmd_ret_802_11_snmp_mib 0x8016 -#define cmd_ret_mac_reg_map 0x8017 -#define cmd_ret_bbp_reg_map 0x8018 -#define cmd_ret_rf_reg_map 0x8023 -#define cmd_ret_mac_reg_access 0x8019 -#define cmd_ret_bbp_reg_access 0x801a -#define cmd_ret_rf_reg_access 0x801b -#define cmd_ret_802_11_radio_control 0x801c -#define cmd_ret_802_11_rf_channel 0x801d -#define cmd_ret_802_11_rssi 0x801f -#define cmd_ret_802_11_rf_tx_power 0x801e -#define cmd_ret_802_11_rf_antenna 0x8020 -#define cmd_ret_802_11_ps_mode 0x8021 -#define cmd_ret_802_11_data_rate 0x8022 - -#define cmd_ret_802_11_ad_hoc_start 0x802B -#define cmd_ret_802_11_ad_hoc_join 0x802C - -#define cmd_ret_802_11_query_tkip_reply_cntrs 0x802e -#define cmd_ret_802_11_enable_rsn 0x802f -#define cmd_ret_802_11_pairwise_tsc 0x8036 -#define cmd_ret_802_11_group_tsc 0x8037 -#define cmd_ret_802_11_key_material 0x805e - -#define cmd_enable_rsn 0x0001 -#define cmd_disable_rsn 0x0000 - -#define cmd_act_set 0x0001 -#define cmd_act_get 0x0000 - -#define cmd_act_get_AES (cmd_act_get + 2) -#define cmd_act_set_AES (cmd_act_set + 2) -#define cmd_act_remove_aes (cmd_act_set + 3) - -#define cmd_ret_802_11_set_afc 0x803c -#define cmd_ret_802_11_get_afc 0x803d - -#define cmd_ret_802_11_ad_hoc_stop 0x8040 - -#define cmd_ret_802_11_beacon_stop 0x8049 - -#define cmd_ret_802_11_mac_address 0x804D -#define cmd_ret_802_11_eeprom_access 0x8059 - -#define cmd_ret_802_11_band_config 0x8058 - -#define cmd_ret_802_11_sleep_params 0x8066 - -#define cmd_ret_802_11_inactivity_timeout 0x8067 - -#define cmd_ret_802_11d_domain_info (0x8000 | \ - cmd_802_11d_domain_info) - -#define cmd_ret_802_11_tpc_cfg (cmd_802_11_tpc_cfg | 0x8000) -#define cmd_ret_802_11_pwr_cfg (cmd_802_11_pwr_cfg | 0x8000) - -#define cmd_ret_802_11_led_gpio_ctrl 0x804e - -#define cmd_ret_802_11_subscribe_event (cmd_802_11_subscribe_event | 0x8000) - -#define cmd_ret_802_11_rate_adapt_rateset (cmd_802_11_rate_adapt_rateset | 0x8000) - -#define cmd_rte_802_11_tx_rate_query (cmd_802_11_tx_rate_query | 0x8000) - -#define cmd_ret_get_tsf 0x8080 - -/* Define action or option for cmd_802_11_set_wep */ -#define cmd_act_add 0x0002 -#define cmd_act_remove 0x0004 -#define cmd_act_use_default 0x0008 - -#define cmd_type_wep_40_bit 0x0001 -#define cmd_type_wep_104_bit 0x0002 - -#define cmd_NUM_OF_WEP_KEYS 4 - -#define cmd_WEP_KEY_INDEX_MASK 0x3fff - -/* Define action or option for cmd_802_11_reset */ -#define cmd_act_halt 0x0003 + /* control periodic calibration */ + uint8_t calcontrol; -/* Define action or option for cmd_802_11_scan */ -#define cmd_bss_type_bss 0x0001 -#define cmd_bss_type_ibss 0x0002 -#define cmd_bss_type_any 0x0003 + /* control the use of external sleep clock */ + uint8_t externalsleepclk; -/* Define action or option for cmd_802_11_scan */ -#define cmd_scan_type_active 0x0000 -#define cmd_scan_type_passive 0x0001 + /* reserved field, should be set to zero */ + __le16 reserved; +} __packed; -#define cmd_scan_radio_type_bg 0 +struct cmd_ds_802_11_rf_channel { + struct cmd_header hdr; -#define cmd_scan_probe_delay_time 0 + __le16 action; + __le16 channel; + __le16 rftype; /* unused */ + __le16 reserved; /* unused */ + u8 channellist[32]; /* unused */ +} __packed; -/* Define action or option for cmd_mac_control */ -#define cmd_act_mac_rx_on 0x0001 -#define cmd_act_mac_tx_on 0x0002 -#define cmd_act_mac_loopback_on 0x0004 -#define cmd_act_mac_wep_enable 0x0008 -#define cmd_act_mac_int_enable 0x0010 -#define cmd_act_mac_multicast_enable 0x0020 -#define cmd_act_mac_broadcast_enable 0x0040 -#define cmd_act_mac_promiscuous_enable 0x0080 -#define cmd_act_mac_all_multicast_enable 0x0100 -#define cmd_act_mac_strict_protection_enable 0x0400 +struct cmd_ds_802_11_rssi { + struct cmd_header hdr; -/* Define action or option for cmd_802_11_radio_control */ -#define cmd_type_auto_preamble 0x0001 -#define cmd_type_short_preamble 0x0002 -#define cmd_type_long_preamble 0x0003 + /* + * request: number of beacons (N) to average the SNR and NF over + * response: SNR of most recent beacon + */ + __le16 n_or_snr; -#define TURN_ON_RF 0x01 -#define RADIO_ON 0x01 -#define RADIO_OFF 0x00 + /* + * The following fields are only set in the response. + * In the request these are reserved and should be set to 0. + */ + __le16 nf; /* most recent beacon noise floor */ + __le16 avg_snr; /* average SNR weighted by N from request */ + __le16 avg_nf; /* average noise floor weighted by N from request */ +} __packed; -#define SET_AUTO_PREAMBLE 0x05 -#define SET_SHORT_PREAMBLE 0x03 -#define SET_LONG_PREAMBLE 0x01 +struct cmd_ds_802_11_mac_address { + struct cmd_header hdr; -/* Define action or option for CMD_802_11_RF_CHANNEL */ -#define cmd_opt_802_11_rf_channel_get 0x00 -#define cmd_opt_802_11_rf_channel_set 0x01 - -/* Define action or option for cmd_802_11_rf_tx_power */ -#define cmd_act_tx_power_opt_get 0x0000 -#define cmd_act_tx_power_opt_set_high 0x8007 -#define cmd_act_tx_power_opt_set_mid 0x8004 -#define cmd_act_tx_power_opt_set_low 0x8000 - -#define cmd_act_tx_power_index_high 0x0007 -#define cmd_act_tx_power_index_mid 0x0004 -#define cmd_act_tx_power_index_low 0x0000 - -/* Define action or option for cmd_802_11_data_rate */ -#define cmd_act_set_tx_auto 0x0000 -#define cmd_act_set_tx_fix_rate 0x0001 -#define cmd_act_get_tx_rate 0x0002 - -#define cmd_act_set_rx 0x0001 -#define cmd_act_set_tx 0x0002 -#define cmd_act_set_both 0x0003 -#define cmd_act_get_rx 0x0004 -#define cmd_act_get_tx 0x0008 -#define cmd_act_get_both 0x000c - -/* Define action or option for cmd_802_11_ps_mode */ -#define cmd_type_cam 0x0000 -#define cmd_type_max_psp 0x0001 -#define cmd_type_fast_psp 0x0002 - -/* Define action or option for cmd_bt_access */ -enum cmd_bt_access_opts { - /* The bt commands start at 5 instead of 1 because the old dft commands - * are mapped to 1-4. These old commands are no longer maintained and - * should not be called. - */ - cmd_act_bt_access_add = 5, - cmd_act_bt_access_del, - cmd_act_bt_access_list, - cmd_act_bt_access_reset, - cmd_act_bt_access_set_invert, - cmd_act_bt_access_get_invert -}; + __le16 action; + u8 macadd[ETH_ALEN]; +} __packed; -/* Define action or option for cmd_fwt_access */ -enum cmd_fwt_access_opts { - cmd_act_fwt_access_add = 1, - cmd_act_fwt_access_del, - cmd_act_fwt_access_lookup, - cmd_act_fwt_access_list, - cmd_act_fwt_access_list_route, - cmd_act_fwt_access_list_neighbor, - cmd_act_fwt_access_reset, - cmd_act_fwt_access_cleanup, - cmd_act_fwt_access_time, -}; +struct cmd_ds_802_11_rf_tx_power { + struct cmd_header hdr; -/* Define action or option for cmd_mesh_access */ -enum cmd_mesh_access_opts { - cmd_act_mesh_get_ttl = 1, - cmd_act_mesh_set_ttl, - cmd_act_mesh_get_stats, - cmd_act_mesh_get_anycast, - cmd_act_mesh_set_anycast, -}; + __le16 action; + __le16 curlevel; + s8 maxlevel; + s8 minlevel; +} __packed; + +/* MONITOR_MODE only exists in OLPC v5 firmware */ +struct cmd_ds_802_11_monitor_mode { + struct cmd_header hdr; + + __le16 action; + __le16 mode; +} __packed; + +struct cmd_ds_set_boot2_ver { + struct cmd_header hdr; + + __le16 action; + __le16 version; +} __packed; + +struct cmd_ds_802_11_fw_wake_method { + struct cmd_header hdr; + + __le16 action; + __le16 method; +} __packed; + +struct cmd_ds_802_11_ps_mode { + struct cmd_header hdr; + + __le16 action; + + /* + * Interval for keepalive in PS mode: + * 0x0000 = don't change + * 0x001E = firmware default + * 0xFFFF = disable + */ + __le16 nullpktinterval; + + /* + * Number of DTIM intervals to wake up for: + * 0 = don't change + * 1 = firmware default + * 5 = max + */ + __le16 multipledtim; + + __le16 reserved; + __le16 locallisteninterval; + + /* + * AdHoc awake period (FW v9+ only): + * 0 = don't change + * 1 = always awake (IEEE standard behavior) + * 2 - 31 = sleep for (n - 1) periods and awake for 1 period + * 32 - 254 = invalid + * 255 = sleep at each ATIM + */ + __le16 adhoc_awake_period; +} __packed; + +struct cmd_confirm_sleep { + struct cmd_header hdr; + + __le16 action; + __le16 nullpktinterval; + __le16 multipledtim; + __le16 reserved; + __le16 locallisteninterval; +} __packed; + +struct cmd_ds_802_11_data_rate { + struct cmd_header hdr; + + __le16 action; + __le16 reserved; + u8 rates[MAX_RATES]; +} __packed; + +struct cmd_ds_802_11_rate_adapt_rateset { + struct cmd_header hdr; + __le16 action; + __le16 enablehwauto; + __le16 bitmap; +} __packed; + +struct cmd_ds_802_11_ad_hoc_start { + struct cmd_header hdr; + + u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 bsstype; + __le16 beaconperiod; + u8 dtimperiod; /* Reserved on v9 and later */ + struct ieee_ie_ibss_param_set ibss; + u8 reserved1[4]; + struct ieee_ie_ds_param_set ds; + u8 reserved2[4]; + __le16 probedelay; /* Reserved on v9 and later */ + __le16 capability; + u8 rates[MAX_RATES]; + u8 tlv_memory_size_pad[100]; +} __packed; + +struct cmd_ds_802_11_ad_hoc_result { + struct cmd_header hdr; + + u8 pad[3]; + u8 bssid[ETH_ALEN]; +} __packed; + +struct adhoc_bssdesc { + u8 bssid[ETH_ALEN]; + u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 type; + __le16 beaconperiod; + u8 dtimperiod; + __le64 timestamp; + __le64 localtime; + struct ieee_ie_ds_param_set ds; + u8 reserved1[4]; + struct ieee_ie_ibss_param_set ibss; + u8 reserved2[4]; + __le16 capability; + u8 rates[MAX_RATES]; + + /* + * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the + * Adhoc join command and will cause a binary layout mismatch with + * the firmware + */ +} __packed; + +struct cmd_ds_802_11_ad_hoc_join { + struct cmd_header hdr; + + struct adhoc_bssdesc bss; + __le16 failtimeout; /* Reserved on v9 and later */ + __le16 probedelay; /* Reserved on v9 and later */ +} __packed; + +struct cmd_ds_802_11_ad_hoc_stop { + struct cmd_header hdr; +} __packed; -/** Card Event definition */ -#define MACREG_INT_CODE_TX_PPA_FREE 0x00000000 -#define MACREG_INT_CODE_TX_DMA_DONE 0x00000001 -#define MACREG_INT_CODE_LINK_LOSE_W_SCAN 0x00000002 -#define MACREG_INT_CODE_LINK_LOSE_NO_SCAN 0x00000003 -#define MACREG_INT_CODE_LINK_SENSED 0x00000004 -#define MACREG_INT_CODE_CMD_FINISHED 0x00000005 -#define MACREG_INT_CODE_MIB_CHANGED 0x00000006 -#define MACREG_INT_CODE_INIT_DONE 0x00000007 -#define MACREG_INT_CODE_DEAUTHENTICATED 0x00000008 -#define MACREG_INT_CODE_DISASSOCIATED 0x00000009 -#define MACREG_INT_CODE_PS_AWAKE 0x0000000a -#define MACREG_INT_CODE_PS_SLEEP 0x0000000b -#define MACREG_INT_CODE_MIC_ERR_MULTICAST 0x0000000d -#define MACREG_INT_CODE_MIC_ERR_UNICAST 0x0000000e -#define MACREG_INT_CODE_WM_AWAKE 0x0000000f -#define MACREG_INT_CODE_ADHOC_BCN_LOST 0x00000011 -#define MACREG_INT_CODE_RSSI_LOW 0x00000019 -#define MACREG_INT_CODE_SNR_LOW 0x0000001a -#define MACREG_INT_CODE_MAX_FAIL 0x0000001b -#define MACREG_INT_CODE_RSSI_HIGH 0x0000001c -#define MACREG_INT_CODE_SNR_HIGH 0x0000001d -#define MACREG_INT_CODE_MESH_AUTO_STARTED 0x00000023 - -#endif /* _HOST_H_ */ +struct cmd_ds_802_11_enable_rsn { + struct cmd_header hdr; + + __le16 action; + __le16 enable; +} __packed; + +struct MrvlIEtype_keyParamSet { + /* type ID */ + __le16 type; + + /* length of Payload */ + __le16 length; + + /* type of key: WEP=0, TKIP=1, AES=2 */ + __le16 keytypeid; + + /* key control Info specific to a keytypeid */ + __le16 keyinfo; + + /* length of key */ + __le16 keylen; + + /* key material of size keylen */ + u8 key[32]; +} __packed; + +#define MAX_WOL_RULES 16 + +struct host_wol_rule { + uint8_t rule_no; + uint8_t rule_ops; + __le16 sig_offset; + __le16 sig_length; + __le16 reserve; + __be32 sig_mask; + __be32 signature; +} __packed; + +struct wol_config { + uint8_t action; + uint8_t pattern; + uint8_t no_rules_in_cmd; + uint8_t result; + struct host_wol_rule rule[MAX_WOL_RULES]; +} __packed; + +struct cmd_ds_host_sleep { + struct cmd_header hdr; + __le32 criteria; + uint8_t gpio; + uint16_t gap; + struct wol_config wol_conf; +} __packed; + + + +struct cmd_ds_802_11_key_material { + struct cmd_header hdr; + + __le16 action; + struct MrvlIEtype_keyParamSet keyParamSet[2]; +} __packed; + +struct cmd_ds_802_11_eeprom_access { + struct cmd_header hdr; + __le16 action; + __le16 offset; + __le16 len; + /* firmware says it returns a maximum of 20 bytes */ +#define LBS_EEPROM_READ_LEN 20 + u8 value[LBS_EEPROM_READ_LEN]; +} __packed; + +struct cmd_ds_802_11_tpc_cfg { + struct cmd_header hdr; + + __le16 action; + uint8_t enable; + int8_t P0; + int8_t P1; + int8_t P2; + uint8_t usesnr; +} __packed; + + +struct cmd_ds_802_11_pa_cfg { + struct cmd_header hdr; + + __le16 action; + uint8_t enable; + int8_t P0; + int8_t P1; + int8_t P2; +} __packed; + + +struct cmd_ds_802_11_led_ctrl { + struct cmd_header hdr; + + __le16 action; + __le16 numled; + u8 data[256]; +} __packed; + +/* Automatic Frequency Control */ +struct cmd_ds_802_11_afc { + struct cmd_header hdr; + + __le16 afc_auto; + union { + struct { + __le16 threshold; + __le16 period; + }; + struct { + __le16 timing_offset; /* signed */ + __le16 carrier_offset; /* signed */ + }; + }; +} __packed; + +struct cmd_tx_rate_query { + __le16 txrate; +} __packed; + +struct cmd_ds_get_tsf { + __le64 tsfvalue; +} __packed; + +struct cmd_ds_bt_access { + struct cmd_header hdr; + + __le16 action; + __le32 id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; +} __packed; + +struct cmd_ds_fwt_access { + struct cmd_header hdr; + + __le16 action; + __le32 id; + u8 valid; + u8 da[ETH_ALEN]; + u8 dir; + u8 ra[ETH_ALEN]; + __le32 ssn; + __le32 dsn; + __le32 metric; + u8 rate; + u8 hopcount; + u8 ttl; + __le32 expiration; + u8 sleepmode; + __le32 snr; + __le32 references; + u8 prec[ETH_ALEN]; +} __packed; + +struct cmd_ds_mesh_config { + struct cmd_header hdr; + + __le16 action; + __le16 channel; + __le16 type; + __le16 length; + u8 data[128]; /* last position reserved */ +} __packed; + +struct cmd_ds_mesh_access { + struct cmd_header hdr; + + __le16 action; + __le32 data[32]; /* last position reserved */ +} __packed; + +/* Number of stats counters returned by the firmware */ +#define MESH_STATS_NUM 8 +#endif |