diff options
Diffstat (limited to 'drivers/net/wireless/libertas/README')
| -rw-r--r-- | drivers/net/wireless/libertas/README | 34 |
1 files changed, 4 insertions, 30 deletions
diff --git a/drivers/net/wireless/libertas/README b/drivers/net/wireless/libertas/README index 60fd1afe89a..1a554a685e9 100644 --- a/drivers/net/wireless/libertas/README +++ b/drivers/net/wireless/libertas/README @@ -8,9 +8,8 @@ Ltd. under the terms of the GNU General Public License Version 2, June 1991 (the "License"). You may use, redistribute and/or modify this File in accordance with the terms and conditions of the License, a copy of which - is available along with the File in the license.txt file or by writing to - the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA - 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + is available along with the File in the license.txt file or on the worldwide + web at http://www.gnu.org/licenses/gpl.txt. THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE @@ -70,7 +69,7 @@ rdrf These commands are used to read the MAC, BBP and RF registers from the card. These commands take one parameter that specifies the offset location that is to be read. This parameter must be specified in - hexadecimal (its possible to preceed preceding the number with a "0x"). + hexadecimal (its possible to precede preceding the number with a "0x"). Path: /sys/kernel/debug/libertas_wireless/ethX/registers/ @@ -84,7 +83,7 @@ wrrf These commands are used to write the MAC, BBP and RF registers in the card. These commands take two parameters that specify the offset location and the value that is to be written. This parameters must - be specified in hexadecimal (its possible to preceed the number + be specified in hexadecimal (its possible to precede the number with a "0x"). Usage: @@ -238,28 +237,3 @@ hostsleep echo "1" > hostsleep : enable host sleep. echo "0" > hostsleep : disable host sleep -======================== -IWCONFIG COMMANDS -======================== -power period - - This command is used to configure the station in deep sleep mode / - auto deep sleep mode. - - The timer is implemented to monitor the activities (command, event, - etc.). When an activity is detected station will exit from deep - sleep mode automatically and restart the timer. At timer expiry - (no activity for defined time period) the deep sleep mode is entered - automatically. - - Note: this command is for SDIO interface only. - - Usage: - To enable deep sleep mode do: - iwconfig wlan0 power period 0 - To enable auto deep sleep mode with idle time period 5 seconds do: - iwconfig wlan0 power period 5 - To disable deep sleep/auto deep sleep mode do: - iwconfig wlan0 power period -1 - -============================================================================== |