diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-prph.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-prph.h | 147 |
1 files changed, 135 insertions, 12 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index bebdd828f32..4997e27672b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -22,7 +22,7 @@ * USA * * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. + * in the file called COPYING. * * Contact Information: * Intel Linux Wireless <ilw@linux.intel.com> @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -95,7 +95,58 @@ #define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */ #define APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060) -#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) +#define APMG_PCIDEV_STT_VAL_PERSIST_DIS (0x00000200) +#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) + +#define APMG_RTC_INT_STT_RFKILL (0x10000000) + +/* Device system time */ +#define DEVICE_SYSTEM_TIME_REG 0xA0206C + +/* Device NMI register */ +#define DEVICE_SET_NMI_REG 0x00a01c30 +#define DEVICE_SET_NMI_VAL 0x1 +#define DEVICE_SET_NMI_8000B_REG 0x00a01c24 +#define DEVICE_SET_NMI_8000B_VAL 0x1000000 + +/* Shared registers (0x0..0x3ff, via target indirect or periphery */ +#define SHR_BASE 0x00a10000 + +/* Shared GP1 register */ +#define SHR_APMG_GP1_REG 0x01dc +#define SHR_APMG_GP1_REG_PRPH (SHR_BASE + SHR_APMG_GP1_REG) +#define SHR_APMG_GP1_WF_XTAL_LP_EN 0x00000004 +#define SHR_APMG_GP1_CHICKEN_BIT_SELECT 0x80000000 + +/* Shared DL_CFG register */ +#define SHR_APMG_DL_CFG_REG 0x01c4 +#define SHR_APMG_DL_CFG_REG_PRPH (SHR_BASE + SHR_APMG_DL_CFG_REG) +#define SHR_APMG_DL_CFG_RTCS_CLK_SELECTOR_MSK 0x000000c0 +#define SHR_APMG_DL_CFG_RTCS_CLK_INTERNAL_XTAL 0x00000080 +#define SHR_APMG_DL_CFG_DL_CLOCK_POWER_UP 0x00000100 + +/* Shared APMG_XTAL_CFG register */ +#define SHR_APMG_XTAL_CFG_REG 0x1c0 +#define SHR_APMG_XTAL_CFG_XTAL_ON_REQ 0x80000000 + +/* + * Device reset for family 8000 + * write to bit 24 in order to reset the CPU +*/ +#define RELEASE_CPU_RESET (0x300C) +#define RELEASE_CPU_RESET_BIT BIT(24) + +/***************************************************************************** + * 7000/3000 series SHR DTS addresses * + *****************************************************************************/ + +#define SHR_MISC_WFM_DTS_EN (0x00a10024) +#define DTSC_CFG_MODE (0x00a10604) +#define DTSC_VREF_AVG (0x00a10648) +#define DTSC_VREF5_AVG (0x00a1064c) +#define DTSC_CFG_MODE_PERIODIC (0x2) +#define DTSC_PTAT_AVG (0x00a10650) + /** * Tx Scheduler @@ -187,7 +238,7 @@ #define SCD_QUEUE_STTS_REG_POS_ACTIVE (3) #define SCD_QUEUE_STTS_REG_POS_WSL (4) #define SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19) -#define SCD_QUEUE_STTS_REG_MSK (0x00FF0000) +#define SCD_QUEUE_STTS_REG_MSK (0x017F0000) #define SCD_QUEUE_CTX_REG1_CREDIT_POS (8) #define SCD_QUEUE_CTX_REG1_CREDIT_MSK (0x00FFFF00) @@ -213,13 +264,12 @@ #define SCD_CONTEXT_QUEUE_OFFSET(x)\ (SCD_CONTEXT_MEM_LOWER_BOUND + ((x) * 8)) +#define SCD_TX_STTS_QUEUE_OFFSET(x)\ + (SCD_TX_STTS_MEM_LOWER_BOUND + ((x) * 16)) + #define SCD_TRANS_TBL_OFFSET_QUEUE(x) \ ((SCD_TRANS_TBL_MEM_LOWER_BOUND + ((x) * 2)) & 0xfffc) -#define SCD_QUEUECHAIN_SEL_ALL(priv) \ - (((1<<hw_params(priv).max_txq_num) - 1) &\ - (~(1<<(priv)->shrd->cmd_queue))) - #define SCD_BASE (PRPH_BASE + 0xa02c00) #define SCD_SRAM_BASE_ADDR (SCD_BASE + 0x0) @@ -227,13 +277,86 @@ #define SCD_AIT (SCD_BASE + 0x0c) #define SCD_TXFACT (SCD_BASE + 0x10) #define SCD_ACTIVE (SCD_BASE + 0x14) -#define SCD_QUEUE_WRPTR(x) (SCD_BASE + 0x18 + (x) * 4) -#define SCD_QUEUE_RDPTR(x) (SCD_BASE + 0x68 + (x) * 4) #define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8) +#define SCD_CHAINEXT_EN (SCD_BASE + 0x244) #define SCD_AGGR_SEL (SCD_BASE + 0x248) #define SCD_INTERRUPT_MASK (SCD_BASE + 0x108) -#define SCD_QUEUE_STATUS_BITS(x) (SCD_BASE + 0x10c + (x) * 4) + +static inline unsigned int SCD_QUEUE_WRPTR(unsigned int chnl) +{ + if (chnl < 20) + return SCD_BASE + 0x18 + chnl * 4; + WARN_ON_ONCE(chnl >= 32); + return SCD_BASE + 0x284 + (chnl - 20) * 4; +} + +static inline unsigned int SCD_QUEUE_RDPTR(unsigned int chnl) +{ + if (chnl < 20) + return SCD_BASE + 0x68 + chnl * 4; + WARN_ON_ONCE(chnl >= 32); + return SCD_BASE + 0x2B4 + (chnl - 20) * 4; +} + +static inline unsigned int SCD_QUEUE_STATUS_BITS(unsigned int chnl) +{ + if (chnl < 20) + return SCD_BASE + 0x10c + chnl * 4; + WARN_ON_ONCE(chnl >= 32); + return SCD_BASE + 0x384 + (chnl - 20) * 4; +} /*********************** END TX SCHEDULER *************************************/ +/* Oscillator clock */ +#define OSC_CLK (0xa04068) +#define OSC_CLK_FORCE_CONTROL (0x8) + +/* SECURE boot registers */ +#define LMPM_SECURE_BOOT_CONFIG_ADDR (0x100) +enum secure_boot_config_reg { + LMPM_SECURE_BOOT_CONFIG_INSPECTOR_BURNED_IN_OTP = 0x00000001, + LMPM_SECURE_BOOT_CONFIG_INSPECTOR_NOT_REQ = 0x00000002, +}; + +#define LMPM_SECURE_BOOT_CPU1_STATUS_ADDR (0x1E30) +#define LMPM_SECURE_BOOT_CPU2_STATUS_ADDR (0x1E34) +enum secure_boot_status_reg { + LMPM_SECURE_BOOT_CPU_STATUS_VERF_STATUS = 0x00000001, + LMPM_SECURE_BOOT_CPU_STATUS_VERF_COMPLETED = 0x00000002, + LMPM_SECURE_BOOT_CPU_STATUS_VERF_SUCCESS = 0x00000004, + LMPM_SECURE_BOOT_CPU_STATUS_VERF_FAIL = 0x00000008, + LMPM_SECURE_BOOT_CPU_STATUS_SIGN_VERF_FAIL = 0x00000010, + LMPM_SECURE_BOOT_STATUS_SUCCESS = 0x00000003, +}; + +#define CSR_UCODE_LOAD_STATUS_ADDR (0x1E70) +enum secure_load_status_reg { + LMPM_CPU_UCODE_LOADING_STARTED = 0x00000001, + LMPM_CPU_HDRS_LOADING_COMPLETED = 0x00000003, + LMPM_CPU_UCODE_LOADING_COMPLETED = 0x00000007, + LMPM_CPU_STATUS_NUM_OF_LAST_COMPLETED = 0x000000F8, + LMPM_CPU_STATUS_NUM_OF_LAST_LOADED_BLOCK = 0x0000FF00, +}; + +#define LMPM_SECURE_INSPECTOR_CODE_ADDR (0x1E38) +#define LMPM_SECURE_INSPECTOR_DATA_ADDR (0x1E3C) +#define LMPM_SECURE_UCODE_LOAD_CPU1_HDR_ADDR (0x1E78) +#define LMPM_SECURE_UCODE_LOAD_CPU2_HDR_ADDR (0x1E7C) + +#define LMPM_SECURE_INSPECTOR_CODE_MEM_SPACE (0x400000) +#define LMPM_SECURE_INSPECTOR_DATA_MEM_SPACE (0x402000) +#define LMPM_SECURE_CPU1_HDR_MEM_SPACE (0x420000) +#define LMPM_SECURE_CPU2_HDR_MEM_SPACE (0x420400) + +#define LMPM_SECURE_TIME_OUT (100) + +/* Rx FIFO */ +#define RXF_SIZE_ADDR (0xa00c88) +#define RXF_SIZE_BYTE_CND_POS (7) +#define RXF_SIZE_BYTE_CNT_MSK (0x3ff << RXF_SIZE_BYTE_CND_POS) + +#define RXF_LD_FENCE_OFFSET_ADDR (0xa00c10) +#define RXF_FIFO_RD_FENCE_ADDR (0xa00c0c) + #endif /* __iwl_prph_h__ */ |