diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-fw.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-fw.h | 83 |
1 files changed, 47 insertions, 36 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h index 5f1493c4409..b1a33322b9b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw.h @@ -74,27 +74,25 @@ * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w). * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P. * @IWL_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS - * @IWL_UCODE_TLV_FLAGS_UAPSD: This uCode image supports uAPSD + * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan * offload profile config command. - * @IWL_UCODE_TLV_FLAGS_RX_ENERGY_API: supports rx signal strength api - * @IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2: using the new time event API. * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six * (rather than two) IPv6 addresses - * @IWL_UCODE_TLV_FLAGS_BF_UPDATED: new beacon filtering API * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element * from the probe request template. - * @IWL_UCODE_TLV_FLAGS_D3_CONTINUITY_API: modified D3 API to allow keeping - * connection when going back to D0 * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version) * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version) - * @IWL_UCODE_TLV_FLAGS_SCHED_SCAN: this uCode image supports scheduled scan. - * @IWL_UCODE_TLV_FLAGS_STA_KEY_CMD: new ADD_STA and ADD_STA_KEY command API - * @IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD: support device wide power command - * containing CAM (Continuous Active Mode) indication. - * @IWL_UCODE_TLV_FLAGS_P2P_PS: P2P client power save is supported (only on a - * single bound interface). + * @IWL_UCODE_TLV_FLAGS_P2P_PM: P2P client supports PM as a stand alone MAC + * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and + * P2P client interfaces simultaneously if they are in different bindings. + * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and + * P2P client interfaces simultaneously if they are in same bindings. + * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save + * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering. + * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients + * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS. */ enum iwl_ucode_tlv_flag { IWL_UCODE_TLV_FLAGS_PAN = BIT(0), @@ -102,23 +100,37 @@ enum iwl_ucode_tlv_flag { IWL_UCODE_TLV_FLAGS_MFP = BIT(2), IWL_UCODE_TLV_FLAGS_P2P = BIT(3), IWL_UCODE_TLV_FLAGS_DW_BC_TABLE = BIT(4), - IWL_UCODE_TLV_FLAGS_NEWBT_COEX = BIT(5), - IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT = BIT(6), IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7), - IWL_UCODE_TLV_FLAGS_RX_ENERGY_API = BIT(8), - IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2 = BIT(9), IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10), - IWL_UCODE_TLV_FLAGS_BF_UPDATED = BIT(11), IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12), - IWL_UCODE_TLV_FLAGS_D3_CONTINUITY_API = BIT(14), IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15), IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16), - IWL_UCODE_TLV_FLAGS_SCHED_SCAN = BIT(17), - IWL_UCODE_TLV_FLAGS_STA_KEY_CMD = BIT(19), - IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD = BIT(20), - IWL_UCODE_TLV_FLAGS_P2P_PS = BIT(21), + IWL_UCODE_TLV_FLAGS_P2P_PM = BIT(21), + IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM = BIT(22), + IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM = BIT(23), IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24), + IWL_UCODE_TLV_FLAGS_EBS_SUPPORT = BIT(25), IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26), + IWL_UCODE_TLV_FLAGS_BCAST_FILTERING = BIT(29), + IWL_UCODE_TLV_FLAGS_GO_UAPSD = BIT(30), +}; + +/** + * enum iwl_ucode_tlv_api - ucode api + * @IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID: wowlan config includes tid field. + * @IWL_UCODE_TLV_API_CSA_FLOW: ucode can do unbind-bind flow for CSA. + */ +enum iwl_ucode_tlv_api { + IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID = BIT(0), + IWL_UCODE_TLV_API_CSA_FLOW = BIT(4), +}; + +/** + * enum iwl_ucode_tlv_capa - ucode capabilities + * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3 + */ +enum iwl_ucode_tlv_capa { + IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = BIT(0), }; /* The default calibrate table size if not specified by firmware file */ @@ -160,13 +172,17 @@ enum iwl_ucode_sec { * For 16.0 uCode and above, there is no differentiation between sections, * just an offset to the HW address. */ -#define IWL_UCODE_SECTION_MAX 6 -#define IWL_UCODE_FIRST_SECTION_OF_SECOND_CPU (IWL_UCODE_SECTION_MAX/2) +#define IWL_UCODE_SECTION_MAX 12 +#define IWL_API_ARRAY_SIZE 1 +#define IWL_CAPABILITIES_ARRAY_SIZE 1 +#define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC struct iwl_ucode_capabilities { u32 max_probe_length; u32 standard_phy_calibration_size; u32 flags; + u32 api[IWL_API_ARRAY_SIZE]; + u32 capa[IWL_CAPABILITIES_ARRAY_SIZE]; }; /* one for each uCode image (inst/data, init/runtime/wowlan) */ @@ -182,6 +198,11 @@ struct fw_img { bool is_dual_cpus; }; +struct iwl_sf_region { + u32 addr; + u32 size; +}; + /* uCode version contains 4 values: Major/Minor/API/Serial */ #define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24) #define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16) @@ -285,22 +306,12 @@ struct iwl_fw { struct iwl_tlv_calib_ctrl default_calib[IWL_UCODE_TYPE_MAX]; u32 phy_config; + u8 valid_tx_ant; + u8 valid_rx_ant; bool mvm_fw; struct ieee80211_cipher_scheme cs[IWL_UCODE_MAX_CS]; }; -static inline u8 iwl_fw_valid_tx_ant(const struct iwl_fw *fw) -{ - return (fw->phy_config & FW_PHY_CFG_TX_CHAIN) >> - FW_PHY_CFG_TX_CHAIN_POS; -} - -static inline u8 iwl_fw_valid_rx_ant(const struct iwl_fw *fw) -{ - return (fw->phy_config & FW_PHY_CFG_RX_CHAIN) >> - FW_PHY_CFG_RX_CHAIN_POS; -} - #endif /* __iwl_fw_h__ */ |