diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-eeprom.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-eeprom.c | 1154 |
1 files changed, 0 insertions, 1154 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c deleted file mode 100644 index 4a30969689f..00000000000 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ /dev/null @@ -1,1154 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - *****************************************************************************/ - - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> - -#include <net/mac80211.h> - -#include "iwl-commands.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-debug.h" -#include "iwl-eeprom.h" -#include "iwl-io.h" - -/************************** EEPROM BANDS **************************** - * - * The iwl_eeprom_band definitions below provide the mapping from the - * EEPROM contents to the specific channel number supported for each - * band. - * - * For example, iwl_priv->eeprom.band_3_channels[4] from the band_3 - * definition below maps to physical channel 42 in the 5.2GHz spectrum. - * The specific geography and calibration information for that channel - * is contained in the eeprom map itself. - * - * During init, we copy the eeprom information and channel map - * information into priv->channel_info_24/52 and priv->channel_map_24/52 - * - * channel_map_24/52 provides the index in the channel_info array for a - * given channel. We have to have two separate maps as there is channel - * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and - * band_2 - * - * A value of 0xff stored in the channel_map indicates that the channel - * is not supported by the hardware at all. - * - * A value of 0xfe in the channel_map indicates that the channel is not - * valid for Tx with the current hardware. This means that - * while the system can tune and receive on a given channel, it may not - * be able to associate or transmit any frames on that - * channel. There is no corresponding channel information for that - * entry. - * - *********************************************************************/ - -/* 2.4 GHz */ -const u8 iwl_eeprom_band_1[14] = { - 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 -}; - -/* 5.2 GHz bands */ -static const u8 iwl_eeprom_band_2[] = { /* 4915-5080MHz */ - 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16 -}; - -static const u8 iwl_eeprom_band_3[] = { /* 5170-5320MHz */ - 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 -}; - -static const u8 iwl_eeprom_band_4[] = { /* 5500-5700MHz */ - 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 -}; - -static const u8 iwl_eeprom_band_5[] = { /* 5725-5825MHz */ - 145, 149, 153, 157, 161, 165 -}; - -static const u8 iwl_eeprom_band_6[] = { /* 2.4 ht40 channel */ - 1, 2, 3, 4, 5, 6, 7 -}; - -static const u8 iwl_eeprom_band_7[] = { /* 5.2 ht40 channel */ - 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157 -}; - -/** - * struct iwl_txpwr_section: eeprom section information - * @offset: indirect address into eeprom image - * @count: number of "struct iwl_eeprom_enhanced_txpwr" in this section - * @band: band type for the section - * @is_common - true: common section, false: channel section - * @is_cck - true: cck section, false: not cck section - * @is_ht_40 - true: all channel in the section are HT40 channel, - * false: legacy or HT 20 MHz - * ignore if it is common section - * @iwl_eeprom_section_channel: channel array in the section, - * ignore if common section - */ -struct iwl_txpwr_section { - u32 offset; - u8 count; - enum ieee80211_band band; - bool is_common; - bool is_cck; - bool is_ht40; - u8 iwl_eeprom_section_channel[EEPROM_MAX_TXPOWER_SECTION_ELEMENTS]; -}; - -/** - * section 1 - 3 are regulatory tx power apply to all channels based on - * modulation: CCK, OFDM - * Band: 2.4GHz, 5.2GHz - * section 4 - 10 are regulatory tx power apply to specified channels - * For example: - * 1L - Channel 1 Legacy - * 1HT - Channel 1 HT - * (1,+1) - Channel 1 HT40 "_above_" - * - * Section 1: all CCK channels - * Section 2: all 2.4 GHz OFDM (Legacy, HT and HT40) channels - * Section 3: all 5.2 GHz OFDM (Legacy, HT and HT40) channels - * Section 4: 2.4 GHz 20MHz channels: 1L, 1HT, 2L, 2HT, 10L, 10HT, 11L, 11HT - * Section 5: 2.4 GHz 40MHz channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1) - * Section 6: 5.2 GHz 20MHz channels: 36L, 64L, 100L, 36HT, 64HT, 100HT - * Section 7: 5.2 GHz 40MHz channels: (36,+1) (60,+1) (100,+1) - * Section 8: 2.4 GHz channel: 13L, 13HT - * Section 9: 2.4 GHz channel: 140L, 140HT - * Section 10: 2.4 GHz 40MHz channels: (132,+1) (44,+1) - * - */ -static const struct iwl_txpwr_section enhinfo[] = { - { EEPROM_LB_CCK_20_COMMON, 1, IEEE80211_BAND_2GHZ, true, true, false }, - { EEPROM_LB_OFDM_COMMON, 3, IEEE80211_BAND_2GHZ, true, false, false }, - { EEPROM_HB_OFDM_COMMON, 3, IEEE80211_BAND_5GHZ, true, false, false }, - { EEPROM_LB_OFDM_20_BAND, 8, IEEE80211_BAND_2GHZ, - false, false, false, - {1, 1, 2, 2, 10, 10, 11, 11 } }, - { EEPROM_LB_OFDM_HT40_BAND, 5, IEEE80211_BAND_2GHZ, - false, false, true, - { 1, 2, 6, 7, 9 } }, - { EEPROM_HB_OFDM_20_BAND, 6, IEEE80211_BAND_5GHZ, - false, false, false, - { 36, 64, 100, 36, 64, 100 } }, - { EEPROM_HB_OFDM_HT40_BAND, 3, IEEE80211_BAND_5GHZ, - false, false, true, - { 36, 60, 100 } }, - { EEPROM_LB_OFDM_20_CHANNEL_13, 2, IEEE80211_BAND_2GHZ, - false, false, false, - { 13, 13 } }, - { EEPROM_HB_OFDM_20_CHANNEL_140, 2, IEEE80211_BAND_5GHZ, - false, false, false, - { 140, 140 } }, - { EEPROM_HB_OFDM_HT40_BAND_1, 2, IEEE80211_BAND_5GHZ, - false, false, true, - { 132, 44 } }, -}; - -/****************************************************************************** - * - * EEPROM related functions - * -******************************************************************************/ - -int iwlcore_eeprom_verify_signature(struct iwl_priv *priv) -{ - u32 gp = iwl_read32(priv, CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK; - int ret = 0; - - IWL_DEBUG_INFO(priv, "EEPROM signature=0x%08x\n", gp); - switch (gp) { - case CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP: - if (priv->nvm_device_type != NVM_DEVICE_TYPE_OTP) { - IWL_ERR(priv, "EEPROM with bad signature: 0x%08x\n", - gp); - ret = -ENOENT; - } - break; - case CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K: - case CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K: - if (priv->nvm_device_type != NVM_DEVICE_TYPE_EEPROM) { - IWL_ERR(priv, "OTP with bad signature: 0x%08x\n", gp); - ret = -ENOENT; - } - break; - case CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP: - default: - IWL_ERR(priv, "bad EEPROM/OTP signature, type=%s, " - "EEPROM_GP=0x%08x\n", - (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP) - ? "OTP" : "EEPROM", gp); - ret = -ENOENT; - break; - } - return ret; -} -EXPORT_SYMBOL(iwlcore_eeprom_verify_signature); - -static void iwl_set_otp_access(struct iwl_priv *priv, enum iwl_access_mode mode) -{ - u32 otpgp; - - otpgp = iwl_read32(priv, CSR_OTP_GP_REG); - if (mode == IWL_OTP_ACCESS_ABSOLUTE) - iwl_clear_bit(priv, CSR_OTP_GP_REG, - CSR_OTP_GP_REG_OTP_ACCESS_MODE); - else - iwl_set_bit(priv, CSR_OTP_GP_REG, - CSR_OTP_GP_REG_OTP_ACCESS_MODE); -} - -static int iwlcore_get_nvm_type(struct iwl_priv *priv) -{ - u32 otpgp; - int nvm_type; - - /* OTP only valid for CP/PP and after */ - switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) { - case CSR_HW_REV_TYPE_NONE: - IWL_ERR(priv, "Unknown hardware type\n"); - return -ENOENT; - case CSR_HW_REV_TYPE_3945: - case CSR_HW_REV_TYPE_4965: - case CSR_HW_REV_TYPE_5300: - case CSR_HW_REV_TYPE_5350: - case CSR_HW_REV_TYPE_5100: - case CSR_HW_REV_TYPE_5150: - nvm_type = NVM_DEVICE_TYPE_EEPROM; - break; - default: - otpgp = iwl_read32(priv, CSR_OTP_GP_REG); - if (otpgp & CSR_OTP_GP_REG_DEVICE_SELECT) - nvm_type = NVM_DEVICE_TYPE_OTP; - else - nvm_type = NVM_DEVICE_TYPE_EEPROM; - break; - } - return nvm_type; -} - -/* - * The device's EEPROM semaphore prevents conflicts between driver and uCode - * when accessing the EEPROM; each access is a series of pulses to/from the - * EEPROM chip, not a single event, so even reads could conflict if they - * weren't arbitrated by the semaphore. - */ -int iwlcore_eeprom_acquire_semaphore(struct iwl_priv *priv) -{ - u16 count; - int ret; - - for (count = 0; count < EEPROM_SEM_RETRY_LIMIT; count++) { - /* Request semaphore */ - iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM); - - /* See if we got it */ - ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM, - CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM, - EEPROM_SEM_TIMEOUT); - if (ret >= 0) { - IWL_DEBUG_IO(priv, "Acquired semaphore after %d tries.\n", - count+1); - return ret; - } - } - - return ret; -} -EXPORT_SYMBOL(iwlcore_eeprom_acquire_semaphore); - -void iwlcore_eeprom_release_semaphore(struct iwl_priv *priv) -{ - iwl_clear_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM); - -} -EXPORT_SYMBOL(iwlcore_eeprom_release_semaphore); - -const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset) -{ - BUG_ON(offset >= priv->cfg->eeprom_size); - return &priv->eeprom[offset]; -} -EXPORT_SYMBOL(iwlcore_eeprom_query_addr); - -static int iwl_init_otp_access(struct iwl_priv *priv) -{ - int ret; - - /* Enable 40MHz radio clock */ - _iwl_write32(priv, CSR_GP_CNTRL, - _iwl_read32(priv, CSR_GP_CNTRL) | - CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - - /* wait for clock to be ready */ - ret = iwl_poll_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, - 25000); - if (ret < 0) - IWL_ERR(priv, "Time out access OTP\n"); - else { - iwl_set_bits_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_RESET_REQ); - udelay(5); - iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_RESET_REQ); - - /* - * CSR auto clock gate disable bit - - * this is only applicable for HW with OTP shadow RAM - */ - if (priv->cfg->shadow_ram_support) - iwl_set_bit(priv, CSR_DBG_LINK_PWR_MGMT_REG, - CSR_RESET_LINK_PWR_MGMT_DISABLED); - } - return ret; -} - -static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, __le16 *eeprom_data) -{ - int ret = 0; - u32 r; - u32 otpgp; - - _iwl_write32(priv, CSR_EEPROM_REG, - CSR_EEPROM_REG_MSK_ADDR & (addr << 1)); - ret = iwl_poll_bit(priv, CSR_EEPROM_REG, - CSR_EEPROM_REG_READ_VALID_MSK, - CSR_EEPROM_REG_READ_VALID_MSK, - IWL_EEPROM_ACCESS_TIMEOUT); - if (ret < 0) { - IWL_ERR(priv, "Time out reading OTP[%d]\n", addr); - return ret; - } - r = _iwl_read_direct32(priv, CSR_EEPROM_REG); - /* check for ECC errors: */ - otpgp = iwl_read32(priv, CSR_OTP_GP_REG); - if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) { - /* stop in this case */ - /* set the uncorrectable OTP ECC bit for acknowledgement */ - iwl_set_bit(priv, CSR_OTP_GP_REG, - CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK); - IWL_ERR(priv, "Uncorrectable OTP ECC error, abort OTP read\n"); - return -EINVAL; - } - if (otpgp & CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK) { - /* continue in this case */ - /* set the correctable OTP ECC bit for acknowledgement */ - iwl_set_bit(priv, CSR_OTP_GP_REG, - CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK); - IWL_ERR(priv, "Correctable OTP ECC error, continue read\n"); - } - *eeprom_data = cpu_to_le16(r >> 16); - return 0; -} - -/* - * iwl_is_otp_empty: check for empty OTP - */ -static bool iwl_is_otp_empty(struct iwl_priv *priv) -{ - u16 next_link_addr = 0; - __le16 link_value; - bool is_empty = false; - - /* locate the beginning of OTP link list */ - if (!iwl_read_otp_word(priv, next_link_addr, &link_value)) { - if (!link_value) { - IWL_ERR(priv, "OTP is empty\n"); - is_empty = true; - } - } else { - IWL_ERR(priv, "Unable to read first block of OTP list.\n"); - is_empty = true; - } - - return is_empty; -} - - -/* - * iwl_find_otp_image: find EEPROM image in OTP - * finding the OTP block that contains the EEPROM image. - * the last valid block on the link list (the block _before_ the last block) - * is the block we should read and used to configure the device. - * If all the available OTP blocks are full, the last block will be the block - * we should read and used to configure the device. - * only perform this operation if shadow RAM is disabled - */ -static int iwl_find_otp_image(struct iwl_priv *priv, - u16 *validblockaddr) -{ - u16 next_link_addr = 0, valid_addr; - __le16 link_value = 0; - int usedblocks = 0; - - /* set addressing mode to absolute to traverse the link list */ - iwl_set_otp_access(priv, IWL_OTP_ACCESS_ABSOLUTE); - - /* checking for empty OTP or error */ - if (iwl_is_otp_empty(priv)) - return -EINVAL; - - /* - * start traverse link list - * until reach the max number of OTP blocks - * different devices have different number of OTP blocks - */ - do { - /* save current valid block address - * check for more block on the link list - */ - valid_addr = next_link_addr; - next_link_addr = le16_to_cpu(link_value) * sizeof(u16); - IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n", - usedblocks, next_link_addr); - if (iwl_read_otp_word(priv, next_link_addr, &link_value)) - return -EINVAL; - if (!link_value) { - /* - * reach the end of link list, return success and - * set address point to the starting address - * of the image - */ - *validblockaddr = valid_addr; - /* skip first 2 bytes (link list pointer) */ - *validblockaddr += 2; - return 0; - } - /* more in the link list, continue */ - usedblocks++; - } while (usedblocks <= priv->cfg->max_ll_items); - - /* OTP has no valid blocks */ - IWL_DEBUG_INFO(priv, "OTP has no valid blocks\n"); - return -EINVAL; -} - -/** - * iwl_eeprom_init - read EEPROM contents - * - * Load the EEPROM contents from adapter into priv->eeprom - * - * NOTE: This routine uses the non-debug IO access functions. - */ -int iwl_eeprom_init(struct iwl_priv *priv) -{ - __le16 *e; - u32 gp = iwl_read32(priv, CSR_EEPROM_GP); - int sz; - int ret; - u16 addr; - u16 validblockaddr = 0; - u16 cache_addr = 0; - - priv->nvm_device_type = iwlcore_get_nvm_type(priv); - if (priv->nvm_device_type == -ENOENT) - return -ENOENT; - /* allocate eeprom */ - IWL_DEBUG_INFO(priv, "NVM size = %d\n", priv->cfg->eeprom_size); - sz = priv->cfg->eeprom_size; - priv->eeprom = kzalloc(sz, GFP_KERNEL); - if (!priv->eeprom) { - ret = -ENOMEM; - goto alloc_err; - } - e = (__le16 *)priv->eeprom; - - priv->cfg->ops->lib->apm_ops.init(priv); - - ret = priv->cfg->ops->lib->eeprom_ops.verify_signature(priv); - if (ret < 0) { - IWL_ERR(priv, "EEPROM not found, EEPROM_GP=0x%08x\n", gp); - ret = -ENOENT; - goto err; - } - - /* Make sure driver (instead of uCode) is allowed to read EEPROM */ - ret = priv->cfg->ops->lib->eeprom_ops.acquire_semaphore(priv); - if (ret < 0) { - IWL_ERR(priv, "Failed to acquire EEPROM semaphore.\n"); - ret = -ENOENT; - goto err; - } - - if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP) { - - ret = iwl_init_otp_access(priv); - if (ret) { - IWL_ERR(priv, "Failed to initialize OTP access.\n"); - ret = -ENOENT; - goto done; - } - _iwl_write32(priv, CSR_EEPROM_GP, - iwl_read32(priv, CSR_EEPROM_GP) & - ~CSR_EEPROM_GP_IF_OWNER_MSK); - - iwl_set_bit(priv, CSR_OTP_GP_REG, - CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK | - CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK); - /* traversing the linked list if no shadow ram supported */ - if (!priv->cfg->shadow_ram_support) { - if (iwl_find_otp_image(priv, &validblockaddr)) { - ret = -ENOENT; - goto done; - } - } - for (addr = validblockaddr; addr < validblockaddr + sz; - addr += sizeof(u16)) { - __le16 eeprom_data; - - ret = iwl_read_otp_word(priv, addr, &eeprom_data); - if (ret) - goto done; - e[cache_addr / 2] = eeprom_data; - cache_addr += sizeof(u16); - } - } else { - /* eeprom is an array of 16bit values */ - for (addr = 0; addr < sz; addr += sizeof(u16)) { - u32 r; - - _iwl_write32(priv, CSR_EEPROM_REG, - CSR_EEPROM_REG_MSK_ADDR & (addr << 1)); - - ret = iwl_poll_bit(priv, CSR_EEPROM_REG, - CSR_EEPROM_REG_READ_VALID_MSK, - CSR_EEPROM_REG_READ_VALID_MSK, - IWL_EEPROM_ACCESS_TIMEOUT); - if (ret < 0) { - IWL_ERR(priv, "Time out reading EEPROM[%d]\n", addr); - goto done; - } - r = _iwl_read_direct32(priv, CSR_EEPROM_REG); - e[addr / 2] = cpu_to_le16(r >> 16); - } - } - ret = 0; -done: - priv->cfg->ops->lib->eeprom_ops.release_semaphore(priv); -err: - if (ret) - iwl_eeprom_free(priv); - /* Reset chip to save power until we load uCode during "up". */ - priv->cfg->ops->lib->apm_ops.stop(priv); -alloc_err: - return ret; -} -EXPORT_SYMBOL(iwl_eeprom_init); - -void iwl_eeprom_free(struct iwl_priv *priv) -{ - kfree(priv->eeprom); - priv->eeprom = NULL; -} -EXPORT_SYMBOL(iwl_eeprom_free); - -int iwl_eeprom_check_version(struct iwl_priv *priv) -{ - u16 eeprom_ver; - u16 calib_ver; - - eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION); - calib_ver = priv->cfg->ops->lib->eeprom_ops.calib_version(priv); - - if (eeprom_ver < priv->cfg->eeprom_ver || - calib_ver < priv->cfg->eeprom_calib_ver) - goto err; - - return 0; -err: - IWL_ERR(priv, "Unsupported (too old) EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n", - eeprom_ver, priv->cfg->eeprom_ver, - calib_ver, priv->cfg->eeprom_calib_ver); - return -EINVAL; - -} -EXPORT_SYMBOL(iwl_eeprom_check_version); - -const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset) -{ - return priv->cfg->ops->lib->eeprom_ops.query_addr(priv, offset); -} -EXPORT_SYMBOL(iwl_eeprom_query_addr); - -u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset) -{ - if (!priv->eeprom) - return 0; - return (u16)priv->eeprom[offset] | ((u16)priv->eeprom[offset + 1] << 8); -} -EXPORT_SYMBOL(iwl_eeprom_query16); - -void iwl_eeprom_get_mac(const struct iwl_priv *priv, u8 *mac) -{ - const u8 *addr = priv->cfg->ops->lib->eeprom_ops.query_addr(priv, - EEPROM_MAC_ADDRESS); - memcpy(mac, addr, ETH_ALEN); -} -EXPORT_SYMBOL(iwl_eeprom_get_mac); - -static void iwl_init_band_reference(const struct iwl_priv *priv, - int eep_band, int *eeprom_ch_count, - const struct iwl_eeprom_channel **eeprom_ch_info, - const u8 **eeprom_ch_index) -{ - u32 offset = priv->cfg->ops->lib-> - eeprom_ops.regulatory_bands[eep_band - 1]; - switch (eep_band) { - case 1: /* 2.4GHz band */ - *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_1); - *eeprom_ch_info = (struct iwl_eeprom_channel *) - iwl_eeprom_query_addr(priv, offset); - *eeprom_ch_index = iwl_eeprom_band_1; - break; - case 2: /* 4.9GHz band */ - *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_2); - *eeprom_ch_info = (struct iwl_eeprom_channel *) - iwl_eeprom_query_addr(priv, offset); - *eeprom_ch_index = iwl_eeprom_band_2; - break; - case 3: /* 5.2GHz band */ - *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_3); - *eeprom_ch_info = (struct iwl_eeprom_channel *) - iwl_eeprom_query_addr(priv, offset); - *eeprom_ch_index = iwl_eeprom_band_3; - break; - case 4: /* 5.5GHz band */ - *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_4); - *eeprom_ch_info = (struct iwl_eeprom_channel *) - iwl_eeprom_query_addr(priv, offset); - *eeprom_ch_index = iwl_eeprom_band_4; - break; - case 5: /* 5.7GHz band */ - *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_5); - *eeprom_ch_info = (struct iwl_eeprom_channel *) - iwl_eeprom_query_addr(priv, offset); - *eeprom_ch_index = iwl_eeprom_band_5; - break; - case 6: /* 2.4GHz ht40 channels */ - *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_6); - *eeprom_ch_info = (struct iwl_eeprom_channel *) - iwl_eeprom_query_addr(priv, offset); - *eeprom_ch_index = iwl_eeprom_band_6; - break; - case 7: /* 5 GHz ht40 channels */ - *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_7); - *eeprom_ch_info = (struct iwl_eeprom_channel *) - iwl_eeprom_query_addr(priv, offset); - *eeprom_ch_index = iwl_eeprom_band_7; - break; - default: - BUG(); - return; - } -} - -#define CHECK_AND_PRINT(x) ((eeprom_ch->flags & EEPROM_CHANNEL_##x) \ - ? # x " " : "") - -/** - * iwl_mod_ht40_chan_info - Copy ht40 channel info into driver's priv. - * - * Does not set up a command, or touch hardware. - */ -static int iwl_mod_ht40_chan_info(struct iwl_priv *priv, - enum ieee80211_band band, u16 channel, - const struct iwl_eeprom_channel *eeprom_ch, - u8 clear_ht40_extension_channel) -{ - struct iwl_channel_info *ch_info; - - ch_info = (struct iwl_channel_info *) - iwl_get_channel_info(priv, band, channel); - - if (!is_channel_valid(ch_info)) - return -1; - - IWL_DEBUG_INFO(priv, "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):" - " Ad-Hoc %ssupported\n", - ch_info->channel, - is_channel_a_band(ch_info) ? - "5.2" : "2.4", - CHECK_AND_PRINT(IBSS), - CHECK_AND_PRINT(ACTIVE), - CHECK_AND_PRINT(RADAR), - CHECK_AND_PRINT(WIDE), - CHECK_AND_PRINT(DFS), - eeprom_ch->flags, - eeprom_ch->max_power_avg, - ((eeprom_ch->flags & EEPROM_CHANNEL_IBSS) - && !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ? - "" : "not "); - - ch_info->ht40_eeprom = *eeprom_ch; - ch_info->ht40_max_power_avg = eeprom_ch->max_power_avg; - ch_info->ht40_flags = eeprom_ch->flags; - if (eeprom_ch->flags & EEPROM_CHANNEL_VALID) - ch_info->ht40_extension_channel &= ~clear_ht40_extension_channel; - - return 0; -} - -/** - * iwl_get_max_txpower_avg - get the highest tx power from all chains. - * find the highest tx power from all chains for the channel - */ -static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv, - struct iwl_eeprom_enhanced_txpwr *enhanced_txpower, - int element, s8 *max_txpower_in_half_dbm) -{ - s8 max_txpower_avg = 0; /* (dBm) */ - - IWL_DEBUG_INFO(priv, "%d - " - "chain_a: %d dB chain_b: %d dB " - "chain_c: %d dB mimo2: %d dB mimo3: %d dB\n", - element, - enhanced_txpower[element].chain_a_max >> 1, - enhanced_txpower[element].chain_b_max >> 1, - enhanced_txpower[element].chain_c_max >> 1, - enhanced_txpower[element].mimo2_max >> 1, - enhanced_txpower[element].mimo3_max >> 1); - /* Take the highest tx power from any valid chains */ - if ((priv->cfg->valid_tx_ant & ANT_A) && - (enhanced_txpower[element].chain_a_max > max_txpower_avg)) - max_txpower_avg = enhanced_txpower[element].chain_a_max; - if ((priv->cfg->valid_tx_ant & ANT_B) && - (enhanced_txpower[element].chain_b_max > max_txpower_avg)) - max_txpower_avg = enhanced_txpower[element].chain_b_max; - if ((priv->cfg->valid_tx_ant & ANT_C) && - (enhanced_txpower[element].chain_c_max > max_txpower_avg)) - max_txpower_avg = enhanced_txpower[element].chain_c_max; - if (((priv->cfg->valid_tx_ant == ANT_AB) | - (priv->cfg->valid_tx_ant == ANT_BC) | - (priv->cfg->valid_tx_ant == ANT_AC)) && - (enhanced_txpower[element].mimo2_max > max_txpower_avg)) - max_txpower_avg = enhanced_txpower[element].mimo2_max; - if ((priv->cfg->valid_tx_ant == ANT_ABC) && - (enhanced_txpower[element].mimo3_max > max_txpower_avg)) - max_txpower_avg = enhanced_txpower[element].mimo3_max; - - /* - * max. tx power in EEPROM is in 1/2 dBm format - * convert from 1/2 dBm to dBm (round-up convert) - * but we also do not want to loss 1/2 dBm resolution which - * will impact performance - */ - *max_txpower_in_half_dbm = max_txpower_avg; - return (max_txpower_avg & 0x01) + (max_txpower_avg >> 1); -} - -/** - * iwl_update_common_txpower: update channel tx power - * update tx power per band based on EEPROM enhanced tx power info. - */ -static s8 iwl_update_common_txpower(struct iwl_priv *priv, - struct iwl_eeprom_enhanced_txpwr *enhanced_txpower, - int section, int element, s8 *max_txpower_in_half_dbm) -{ - struct iwl_channel_info *ch_info; - int ch; - bool is_ht40 = false; - s8 max_txpower_avg; /* (dBm) */ - - /* it is common section, contain all type (Legacy, HT and HT40) - * based on the element in the section to determine - * is it HT 40 or not - */ - if (element == EEPROM_TXPOWER_COMMON_HT40_INDEX) - is_ht40 = true; - max_txpower_avg = - iwl_get_max_txpower_avg(priv, enhanced_txpower, - element, max_txpower_in_half_dbm); - - ch_info = priv->channel_info; - - for (ch = 0; ch < priv->channel_count; ch++) { - /* find matching band and update tx power if needed */ - if ((ch_info->band == enhinfo[section].band) && - (ch_info->max_power_avg < max_txpower_avg) && - (!is_ht40)) { - /* Update regulatory-based run-time data */ - ch_info->max_power_avg = ch_info->curr_txpow = - max_txpower_avg; - ch_info->scan_power = max_txpower_avg; - } - if ((ch_info->band == enhinfo[section].band) && is_ht40 && - (ch_info->ht40_max_power_avg < max_txpower_avg)) { - /* Update regulatory-based run-time data */ - ch_info->ht40_max_power_avg = max_txpower_avg; - } - ch_info++; - } - return max_txpower_avg; -} - -/** - * iwl_update_channel_txpower: update channel tx power - * update channel tx power based on EEPROM enhanced tx power info. - */ -static s8 iwl_update_channel_txpower(struct iwl_priv *priv, - struct iwl_eeprom_enhanced_txpwr *enhanced_txpower, - int section, int element, s8 *max_txpower_in_half_dbm) -{ - struct iwl_channel_info *ch_info; - int ch; - u8 channel; - s8 max_txpower_avg; /* (dBm) */ - - channel = enhinfo[section].iwl_eeprom_section_channel[element]; - max_txpower_avg = - iwl_get_max_txpower_avg(priv, enhanced_txpower, - element, max_txpower_in_half_dbm); - - ch_info = priv->channel_info; - for (ch = 0; ch < priv->channel_count; ch++) { - /* find matching channel and update tx power if needed */ - if (ch_info->channel == channel) { - if ((ch_info->max_power_avg < max_txpower_avg) && - (!enhinfo[section].is_ht40)) { - /* Update regulatory-based run-time data */ - ch_info->max_power_avg = max_txpower_avg; - ch_info->curr_txpow = max_txpower_avg; - ch_info->scan_power = max_txpower_avg; - } - if ((enhinfo[section].is_ht40) && - (ch_info->ht40_max_power_avg < max_txpower_avg)) { - /* Update regulatory-based run-time data */ - ch_info->ht40_max_power_avg = max_txpower_avg; - } - break; - } - ch_info++; - } - return max_txpower_avg; -} - -/** - * iwlcore_eeprom_enhanced_txpower: process enhanced tx power info - */ -void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv) -{ - int eeprom_section_count = 0; - int section, element; - struct iwl_eeprom_enhanced_txpwr *enhanced_txpower; - u32 offset; - s8 max_txpower_avg; /* (dBm) */ - s8 max_txpower_in_half_dbm; /* (half-dBm) */ - - /* Loop through all the sections - * adjust bands and channel's max tx power - * Set the tx_power_user_lmt to the highest power - * supported by any channels and chains - */ - for (section = 0; section < ARRAY_SIZE(enhinfo); section++) { - eeprom_section_count = enhinfo[section].count; - offset = enhinfo[section].offset; - enhanced_txpower = (struct iwl_eeprom_enhanced_txpwr *) - iwl_eeprom_query_addr(priv, offset); - - /* - * check for valid entry - - * different version of EEPROM might contain different set - * of enhanced tx power table - * always check for valid entry before process - * the information - */ - if (!enhanced_txpower->common || enhanced_txpower->reserved) - continue; - - for (element = 0; element < eeprom_section_count; element++) { - if (enhinfo[section].is_common) - max_txpower_avg = - iwl_update_common_txpower(priv, - enhanced_txpower, section, - element, - &max_txpower_in_half_dbm); - else - max_txpower_avg = - iwl_update_channel_txpower(priv, - enhanced_txpower, section, - element, - &max_txpower_in_half_dbm); - - /* Update the tx_power_user_lmt to the highest power - * supported by any channel */ - if (max_txpower_avg > priv->tx_power_user_lmt) - priv->tx_power_user_lmt = max_txpower_avg; - - /* - * Update the tx_power_lmt_in_half_dbm to - * the highest power supported by any channel - */ - if (max_txpower_in_half_dbm > - priv->tx_power_lmt_in_half_dbm) - priv->tx_power_lmt_in_half_dbm = - max_txpower_in_half_dbm; - } - } -} -EXPORT_SYMBOL(iwlcore_eeprom_enhanced_txpower); - -#define CHECK_AND_PRINT_I(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \ - ? # x " " : "") - -/** - * iwl_init_channel_map - Set up driver's info for all possible channels - */ -int iwl_init_channel_map(struct iwl_priv *priv) -{ - int eeprom_ch_count = 0; - const u8 *eeprom_ch_index = NULL; - const struct iwl_eeprom_channel *eeprom_ch_info = NULL; - int band, ch; - struct iwl_channel_info *ch_info; - - if (priv->channel_count) { - IWL_DEBUG_INFO(priv, "Channel map already initialized.\n"); - return 0; - } - - IWL_DEBUG_INFO(priv, "Initializing regulatory info from EEPROM\n"); - - priv->channel_count = - ARRAY_SIZE(iwl_eeprom_band_1) + - ARRAY_SIZE(iwl_eeprom_band_2) + - ARRAY_SIZE(iwl_eeprom_band_3) + - ARRAY_SIZE(iwl_eeprom_band_4) + - ARRAY_SIZE(iwl_eeprom_band_5); - - IWL_DEBUG_INFO(priv, "Parsing data for %d channels.\n", priv->channel_count); - - priv->channel_info = kzalloc(sizeof(struct iwl_channel_info) * - priv->channel_count, GFP_KERNEL); - if (!priv->channel_info) { - IWL_ERR(priv, "Could not allocate channel_info\n"); - priv->channel_count = 0; - return -ENOMEM; - } - - ch_info = priv->channel_info; - - /* Loop through the 5 EEPROM bands adding them in order to the - * channel map we maintain (that contains additional information than - * what just in the EEPROM) */ - for (band = 1; band <= 5; band++) { - - iwl_init_band_reference(priv, band, &eeprom_ch_count, - &eeprom_ch_info, &eeprom_ch_index); - - /* Loop through each band adding each of the channels */ - for (ch = 0; ch < eeprom_ch_count; ch++) { - ch_info->channel = eeprom_ch_index[ch]; - ch_info->band = (band == 1) ? IEEE80211_BAND_2GHZ : - IEEE80211_BAND_5GHZ; - - /* permanently store EEPROM's channel regulatory flags - * and max power in channel info database. */ - ch_info->eeprom = eeprom_ch_info[ch]; - - /* Copy the run-time flags so they are there even on - * invalid channels */ - ch_info->flags = eeprom_ch_info[ch].flags; - /* First write that ht40 is not enabled, and then enable - * one by one */ - ch_info->ht40_extension_channel = - IEEE80211_CHAN_NO_HT40; - - if (!(is_channel_valid(ch_info))) { - IWL_DEBUG_INFO(priv, "Ch. %d Flags %x [%sGHz] - " - "No traffic\n", - ch_info->channel, - ch_info->flags, - is_channel_a_band(ch_info) ? - "5.2" : "2.4"); - ch_info++; - continue; - } - - /* Initialize regulatory-based run-time data */ - ch_info->max_power_avg = ch_info->curr_txpow = - eeprom_ch_info[ch].max_power_avg; - ch_info->scan_power = eeprom_ch_info[ch].max_power_avg; - ch_info->min_power = 0; - - IWL_DEBUG_INFO(priv, "Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm):" - " Ad-Hoc %ssupported\n", - ch_info->channel, - is_channel_a_band(ch_info) ? - "5.2" : "2.4", - CHECK_AND_PRINT_I(VALID), - CHECK_AND_PRINT_I(IBSS), - CHECK_AND_PRINT_I(ACTIVE), - CHECK_AND_PRINT_I(RADAR), - CHECK_AND_PRINT_I(WIDE), - CHECK_AND_PRINT_I(DFS), - eeprom_ch_info[ch].flags, - eeprom_ch_info[ch].max_power_avg, - ((eeprom_ch_info[ch]. - flags & EEPROM_CHANNEL_IBSS) - && !(eeprom_ch_info[ch]. - flags & EEPROM_CHANNEL_RADAR)) - ? "" : "not "); - - /* Set the tx_power_user_lmt to the highest power - * supported by any channel */ - if (eeprom_ch_info[ch].max_power_avg > - priv->tx_power_user_lmt) - priv->tx_power_user_lmt = - eeprom_ch_info[ch].max_power_avg; - - ch_info++; - } - } - - /* Check if we do have HT40 channels */ - if (priv->cfg->ops->lib->eeprom_ops.regulatory_bands[5] == - EEPROM_REGULATORY_BAND_NO_HT40 && - priv->cfg->ops->lib->eeprom_ops.regulatory_bands[6] == - EEPROM_REGULATORY_BAND_NO_HT40) - return 0; - - /* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */ - for (band = 6; band <= 7; band++) { - enum ieee80211_band ieeeband; - - iwl_init_band_reference(priv, band, &eeprom_ch_count, - &eeprom_ch_info, &eeprom_ch_index); - - /* EEPROM band 6 is 2.4, band 7 is 5 GHz */ - ieeeband = - (band == 6) ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; - - /* Loop through each band adding each of the channels */ - for (ch = 0; ch < eeprom_ch_count; ch++) { - /* Set up driver's info for lower half */ - iwl_mod_ht40_chan_info(priv, ieeeband, - eeprom_ch_index[ch], - &eeprom_ch_info[ch], - IEEE80211_CHAN_NO_HT40PLUS); - - /* Set up driver's info for upper half */ - iwl_mod_ht40_chan_info(priv, ieeeband, - eeprom_ch_index[ch] + 4, - &eeprom_ch_info[ch], - IEEE80211_CHAN_NO_HT40MINUS); - } - } - - /* for newer device (6000 series and up) - * EEPROM contain enhanced tx power information - * driver need to process addition information - * to determine the max channel tx power limits - */ - if (priv->cfg->ops->lib->eeprom_ops.update_enhanced_txpower) - priv->cfg->ops->lib->eeprom_ops.update_enhanced_txpower(priv); - - return 0; -} -EXPORT_SYMBOL(iwl_init_channel_map); - -/* - * iwl_free_channel_map - undo allocations in iwl_init_channel_map - */ -void iwl_free_channel_map(struct iwl_priv *priv) -{ - kfree(priv->channel_info); - priv->channel_count = 0; -} -EXPORT_SYMBOL(iwl_free_channel_map); - -/** - * iwl_get_channel_info - Find driver's private channel info - * - * Based on band and channel number. - */ -const struct iwl_channel_info *iwl_get_channel_info(const struct iwl_priv *priv, - enum ieee80211_band band, u16 channel) -{ - int i; - - switch (band) { - case IEEE80211_BAND_5GHZ: - for (i = 14; i < priv->channel_count; i++) { - if (priv->channel_info[i].channel == channel) - return &priv->channel_info[i]; - } - break; - case IEEE80211_BAND_2GHZ: - if (channel >= 1 && channel <= 14) - return &priv->channel_info[channel - 1]; - break; - default: - BUG(); - } - - return NULL; -} -EXPORT_SYMBOL(iwl_get_channel_info); - |