diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-core.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-core.c | 3238 |
1 files changed, 0 insertions, 3238 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c deleted file mode 100644 index 5461f105bd2..00000000000 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ /dev/null @@ -1,3238 +0,0 @@ -/****************************************************************************** - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - *****************************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/etherdevice.h> -#include <linux/sched.h> -#include <net/mac80211.h> - -#include "iwl-eeprom.h" -#include "iwl-dev.h" /* FIXME: remove */ -#include "iwl-debug.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-power.h" -#include "iwl-sta.h" -#include "iwl-helpers.h" - - -MODULE_DESCRIPTION("iwl core"); -MODULE_VERSION(IWLWIFI_VERSION); -MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); -MODULE_LICENSE("GPL"); - -static struct iwl_wimax_coex_event_entry cu_priorities[COEX_NUM_OF_EVENTS] = { - {COEX_CU_UNASSOC_IDLE_RP, COEX_CU_UNASSOC_IDLE_WP, - 0, COEX_UNASSOC_IDLE_FLAGS}, - {COEX_CU_UNASSOC_MANUAL_SCAN_RP, COEX_CU_UNASSOC_MANUAL_SCAN_WP, - 0, COEX_UNASSOC_MANUAL_SCAN_FLAGS}, - {COEX_CU_UNASSOC_AUTO_SCAN_RP, COEX_CU_UNASSOC_AUTO_SCAN_WP, - 0, COEX_UNASSOC_AUTO_SCAN_FLAGS}, - {COEX_CU_CALIBRATION_RP, COEX_CU_CALIBRATION_WP, - 0, COEX_CALIBRATION_FLAGS}, - {COEX_CU_PERIODIC_CALIBRATION_RP, COEX_CU_PERIODIC_CALIBRATION_WP, - 0, COEX_PERIODIC_CALIBRATION_FLAGS}, - {COEX_CU_CONNECTION_ESTAB_RP, COEX_CU_CONNECTION_ESTAB_WP, - 0, COEX_CONNECTION_ESTAB_FLAGS}, - {COEX_CU_ASSOCIATED_IDLE_RP, COEX_CU_ASSOCIATED_IDLE_WP, - 0, COEX_ASSOCIATED_IDLE_FLAGS}, - {COEX_CU_ASSOC_MANUAL_SCAN_RP, COEX_CU_ASSOC_MANUAL_SCAN_WP, - 0, COEX_ASSOC_MANUAL_SCAN_FLAGS}, - {COEX_CU_ASSOC_AUTO_SCAN_RP, COEX_CU_ASSOC_AUTO_SCAN_WP, - 0, COEX_ASSOC_AUTO_SCAN_FLAGS}, - {COEX_CU_ASSOC_ACTIVE_LEVEL_RP, COEX_CU_ASSOC_ACTIVE_LEVEL_WP, - 0, COEX_ASSOC_ACTIVE_LEVEL_FLAGS}, - {COEX_CU_RF_ON_RP, COEX_CU_RF_ON_WP, 0, COEX_CU_RF_ON_FLAGS}, - {COEX_CU_RF_OFF_RP, COEX_CU_RF_OFF_WP, 0, COEX_RF_OFF_FLAGS}, - {COEX_CU_STAND_ALONE_DEBUG_RP, COEX_CU_STAND_ALONE_DEBUG_WP, - 0, COEX_STAND_ALONE_DEBUG_FLAGS}, - {COEX_CU_IPAN_ASSOC_LEVEL_RP, COEX_CU_IPAN_ASSOC_LEVEL_WP, - 0, COEX_IPAN_ASSOC_LEVEL_FLAGS}, - {COEX_CU_RSRVD1_RP, COEX_CU_RSRVD1_WP, 0, COEX_RSRVD1_FLAGS}, - {COEX_CU_RSRVD2_RP, COEX_CU_RSRVD2_WP, 0, COEX_RSRVD2_FLAGS} -}; - -#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \ - [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ - IWL_RATE_SISO_##s##M_PLCP, \ - IWL_RATE_MIMO2_##s##M_PLCP,\ - IWL_RATE_MIMO3_##s##M_PLCP,\ - IWL_RATE_##r##M_IEEE, \ - IWL_RATE_##ip##M_INDEX, \ - IWL_RATE_##in##M_INDEX, \ - IWL_RATE_##rp##M_INDEX, \ - IWL_RATE_##rn##M_INDEX, \ - IWL_RATE_##pp##M_INDEX, \ - IWL_RATE_##np##M_INDEX } - -u32 iwl_debug_level; -EXPORT_SYMBOL(iwl_debug_level); - -static irqreturn_t iwl_isr(int irq, void *data); - -/* - * Parameter order: - * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate - * - * If there isn't a valid next or previous rate then INV is used which - * maps to IWL_RATE_INVALID - * - */ -const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = { - IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */ - IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */ - IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */ - IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */ - IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */ - IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */ - IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */ - IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */ - IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */ - IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */ - IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */ - IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */ - IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */ - /* FIXME:RS: ^^ should be INV (legacy) */ -}; -EXPORT_SYMBOL(iwl_rates); - -/** - * translate ucode response to mac80211 tx status control values - */ -void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags, - struct ieee80211_tx_info *info) -{ - struct ieee80211_tx_rate *r = &info->control.rates[0]; - - info->antenna_sel_tx = - ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); - if (rate_n_flags & RATE_MCS_HT_MSK) - r->flags |= IEEE80211_TX_RC_MCS; - if (rate_n_flags & RATE_MCS_GF_MSK) - r->flags |= IEEE80211_TX_RC_GREEN_FIELD; - if (rate_n_flags & RATE_MCS_HT40_MSK) - r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; - if (rate_n_flags & RATE_MCS_DUP_MSK) - r->flags |= IEEE80211_TX_RC_DUP_DATA; - if (rate_n_flags & RATE_MCS_SGI_MSK) - r->flags |= IEEE80211_TX_RC_SHORT_GI; - r->idx = iwl_hwrate_to_mac80211_idx(rate_n_flags, info->band); -} -EXPORT_SYMBOL(iwl_hwrate_to_tx_control); - -int iwl_hwrate_to_plcp_idx(u32 rate_n_flags) -{ - int idx = 0; - - /* HT rate format */ - if (rate_n_flags & RATE_MCS_HT_MSK) { - idx = (rate_n_flags & 0xff); - - if (idx >= IWL_RATE_MIMO3_6M_PLCP) - idx = idx - IWL_RATE_MIMO3_6M_PLCP; - else if (idx >= IWL_RATE_MIMO2_6M_PLCP) - idx = idx - IWL_RATE_MIMO2_6M_PLCP; - - idx += IWL_FIRST_OFDM_RATE; - /* skip 9M not supported in ht*/ - if (idx >= IWL_RATE_9M_INDEX) - idx += 1; - if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE)) - return idx; - - /* legacy rate format, search for match in table */ - } else { - for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++) - if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF)) - return idx; - } - - return -1; -} -EXPORT_SYMBOL(iwl_hwrate_to_plcp_idx); - -int iwl_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band) -{ - int idx = 0; - int band_offset = 0; - - /* HT rate format: mac80211 wants an MCS number, which is just LSB */ - if (rate_n_flags & RATE_MCS_HT_MSK) { - idx = (rate_n_flags & 0xff); - return idx; - /* Legacy rate format, search for match in table */ - } else { - if (band == IEEE80211_BAND_5GHZ) - band_offset = IWL_FIRST_OFDM_RATE; - for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++) - if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF)) - return idx - band_offset; - } - - return -1; -} - -u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant) -{ - int i; - u8 ind = ant; - for (i = 0; i < RATE_ANT_NUM - 1; i++) { - ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0; - if (priv->hw_params.valid_tx_ant & BIT(ind)) - return ind; - } - return ant; -} -EXPORT_SYMBOL(iwl_toggle_tx_ant); - -const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; -EXPORT_SYMBOL(iwl_bcast_addr); - - -/* This function both allocates and initializes hw and priv. */ -struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg, - struct ieee80211_ops *hw_ops) -{ - struct iwl_priv *priv; - - /* mac80211 allocates memory for this device instance, including - * space for this driver's private structure */ - struct ieee80211_hw *hw = - ieee80211_alloc_hw(sizeof(struct iwl_priv), hw_ops); - if (hw == NULL) { - printk(KERN_ERR "%s: Can not allocate network device\n", - cfg->name); - goto out; - } - - priv = hw->priv; - priv->hw = hw; - -out: - return hw; -} -EXPORT_SYMBOL(iwl_alloc_all); - -void iwl_hw_detect(struct iwl_priv *priv) -{ - priv->hw_rev = _iwl_read32(priv, CSR_HW_REV); - priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG); - pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id); -} -EXPORT_SYMBOL(iwl_hw_detect); - -int iwl_hw_nic_init(struct iwl_priv *priv) -{ - unsigned long flags; - struct iwl_rx_queue *rxq = &priv->rxq; - int ret; - - /* nic_init */ - spin_lock_irqsave(&priv->lock, flags); - priv->cfg->ops->lib->apm_ops.init(priv); - - /* Set interrupt coalescing timer to 512 usecs */ - iwl_write8(priv, CSR_INT_COALESCING, 512 / 32); - - spin_unlock_irqrestore(&priv->lock, flags); - - ret = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN); - - priv->cfg->ops->lib->apm_ops.config(priv); - - /* Allocate the RX queue, or reset if it is already allocated */ - if (!rxq->bd) { - ret = iwl_rx_queue_alloc(priv); - if (ret) { - IWL_ERR(priv, "Unable to initialize Rx queue\n"); - return -ENOMEM; - } - } else - iwl_rx_queue_reset(priv, rxq); - - iwl_rx_replenish(priv); - - iwl_rx_init(priv, rxq); - - spin_lock_irqsave(&priv->lock, flags); - - rxq->need_update = 1; - iwl_rx_queue_update_write_ptr(priv, rxq); - - spin_unlock_irqrestore(&priv->lock, flags); - - /* Allocate and init all Tx and Command queues */ - ret = iwl_txq_ctx_reset(priv); - if (ret) - return ret; - - set_bit(STATUS_INIT, &priv->status); - - return 0; -} -EXPORT_SYMBOL(iwl_hw_nic_init); - -/* - * QoS support -*/ -void iwl_activate_qos(struct iwl_priv *priv, u8 force) -{ - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - priv->qos_data.def_qos_parm.qos_flags = 0; - - if (priv->qos_data.qos_cap.q_AP.queue_request && - !priv->qos_data.qos_cap.q_AP.txop_request) - priv->qos_data.def_qos_parm.qos_flags |= - QOS_PARAM_FLG_TXOP_TYPE_MSK; - if (priv->qos_data.qos_active) - priv->qos_data.def_qos_parm.qos_flags |= - QOS_PARAM_FLG_UPDATE_EDCA_MSK; - - if (priv->current_ht_config.is_ht) - priv->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK; - - if (force || iwl_is_associated(priv)) { - IWL_DEBUG_QOS(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n", - priv->qos_data.qos_active, - priv->qos_data.def_qos_parm.qos_flags); - - iwl_send_cmd_pdu_async(priv, REPLY_QOS_PARAM, - sizeof(struct iwl_qosparam_cmd), - &priv->qos_data.def_qos_parm, NULL); - } -} -EXPORT_SYMBOL(iwl_activate_qos); - -/* - * AC CWmin CW max AIFSN TXOP Limit TXOP Limit - * (802.11b) (802.11a/g) - * AC_BK 15 1023 7 0 0 - * AC_BE 15 1023 3 0 0 - * AC_VI 7 15 2 6.016ms 3.008ms - * AC_VO 3 7 2 3.264ms 1.504ms - */ -void iwl_reset_qos(struct iwl_priv *priv) -{ - u16 cw_min = 15; - u16 cw_max = 1023; - u8 aifs = 2; - bool is_legacy = false; - unsigned long flags; - int i; - - spin_lock_irqsave(&priv->lock, flags); - /* QoS always active in AP and ADHOC mode - * In STA mode wait for association - */ - if (priv->iw_mode == NL80211_IFTYPE_ADHOC || - priv->iw_mode == NL80211_IFTYPE_AP) - priv->qos_data.qos_active = 1; - else - priv->qos_data.qos_active = 0; - - /* check for legacy mode */ - if ((priv->iw_mode == NL80211_IFTYPE_ADHOC && - (priv->active_rate & IWL_OFDM_RATES_MASK) == 0) || - (priv->iw_mode == NL80211_IFTYPE_STATION && - (priv->staging_rxon.flags & RXON_FLG_SHORT_SLOT_MSK) == 0)) { - cw_min = 31; - is_legacy = 1; - } - - if (priv->qos_data.qos_active) - aifs = 3; - - /* AC_BE */ - priv->qos_data.def_qos_parm.ac[0].cw_min = cpu_to_le16(cw_min); - priv->qos_data.def_qos_parm.ac[0].cw_max = cpu_to_le16(cw_max); - priv->qos_data.def_qos_parm.ac[0].aifsn = aifs; - priv->qos_data.def_qos_parm.ac[0].edca_txop = 0; - priv->qos_data.def_qos_parm.ac[0].reserved1 = 0; - - if (priv->qos_data.qos_active) { - /* AC_BK */ - i = 1; - priv->qos_data.def_qos_parm.ac[i].cw_min = cpu_to_le16(cw_min); - priv->qos_data.def_qos_parm.ac[i].cw_max = cpu_to_le16(cw_max); - priv->qos_data.def_qos_parm.ac[i].aifsn = 7; - priv->qos_data.def_qos_parm.ac[i].edca_txop = 0; - priv->qos_data.def_qos_parm.ac[i].reserved1 = 0; - - /* AC_VI */ - i = 2; - priv->qos_data.def_qos_parm.ac[i].cw_min = - cpu_to_le16((cw_min + 1) / 2 - 1); - priv->qos_data.def_qos_parm.ac[i].cw_max = - cpu_to_le16(cw_min); - priv->qos_data.def_qos_parm.ac[i].aifsn = 2; - if (is_legacy) - priv->qos_data.def_qos_parm.ac[i].edca_txop = - cpu_to_le16(6016); - else - priv->qos_data.def_qos_parm.ac[i].edca_txop = - cpu_to_le16(3008); - priv->qos_data.def_qos_parm.ac[i].reserved1 = 0; - - /* AC_VO */ - i = 3; - priv->qos_data.def_qos_parm.ac[i].cw_min = - cpu_to_le16((cw_min + 1) / 4 - 1); - priv->qos_data.def_qos_parm.ac[i].cw_max = - cpu_to_le16((cw_min + 1) / 2 - 1); - priv->qos_data.def_qos_parm.ac[i].aifsn = 2; - priv->qos_data.def_qos_parm.ac[i].reserved1 = 0; - if (is_legacy) - priv->qos_data.def_qos_parm.ac[i].edca_txop = - cpu_to_le16(3264); - else - priv->qos_data.def_qos_parm.ac[i].edca_txop = - cpu_to_le16(1504); - } else { - for (i = 1; i < 4; i++) { - priv->qos_data.def_qos_parm.ac[i].cw_min = - cpu_to_le16(cw_min); - priv->qos_data.def_qos_parm.ac[i].cw_max = - cpu_to_le16(cw_max); - priv->qos_data.def_qos_parm.ac[i].aifsn = aifs; - priv->qos_data.def_qos_parm.ac[i].edca_txop = 0; - priv->qos_data.def_qos_parm.ac[i].reserved1 = 0; - } - } - IWL_DEBUG_QOS(priv, "set QoS to default \n"); - - spin_unlock_irqrestore(&priv->lock, flags); -} -EXPORT_SYMBOL(iwl_reset_qos); - -#define MAX_BIT_RATE_40_MHZ 150 /* Mbps */ -#define MAX_BIT_RATE_20_MHZ 72 /* Mbps */ -static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv, - struct ieee80211_sta_ht_cap *ht_info, - enum ieee80211_band band) -{ - u16 max_bit_rate = 0; - u8 rx_chains_num = priv->hw_params.rx_chains_num; - u8 tx_chains_num = priv->hw_params.tx_chains_num; - - ht_info->cap = 0; - memset(&ht_info->mcs, 0, sizeof(ht_info->mcs)); - - ht_info->ht_supported = true; - - if (priv->cfg->ht_greenfield_support) - ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD; - ht_info->cap |= IEEE80211_HT_CAP_SGI_20; - ht_info->cap |= (IEEE80211_HT_CAP_SM_PS & - (priv->cfg->sm_ps_mode << 2)); - max_bit_rate = MAX_BIT_RATE_20_MHZ; - if (priv->hw_params.ht40_channel & BIT(band)) { - ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; - ht_info->cap |= IEEE80211_HT_CAP_SGI_40; - ht_info->mcs.rx_mask[4] = 0x01; - max_bit_rate = MAX_BIT_RATE_40_MHZ; - } - - if (priv->cfg->mod_params->amsdu_size_8K) - ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU; - - ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF; - ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF; - - ht_info->mcs.rx_mask[0] = 0xFF; - if (rx_chains_num >= 2) - ht_info->mcs.rx_mask[1] = 0xFF; - if (rx_chains_num >= 3) - ht_info->mcs.rx_mask[2] = 0xFF; - - /* Highest supported Rx data rate */ - max_bit_rate *= rx_chains_num; - WARN_ON(max_bit_rate & ~IEEE80211_HT_MCS_RX_HIGHEST_MASK); - ht_info->mcs.rx_highest = cpu_to_le16(max_bit_rate); - - /* Tx MCS capabilities */ - ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; - if (tx_chains_num != rx_chains_num) { - ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF; - ht_info->mcs.tx_params |= ((tx_chains_num - 1) << - IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); - } -} - -/** - * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom - */ -int iwlcore_init_geos(struct iwl_priv *priv) -{ - struct iwl_channel_info *ch; - struct ieee80211_supported_band *sband; - struct ieee80211_channel *channels; - struct ieee80211_channel *geo_ch; - struct ieee80211_rate *rates; - int i = 0; - - if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates || - priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) { - IWL_DEBUG_INFO(priv, "Geography modes already initialized.\n"); - set_bit(STATUS_GEO_CONFIGURED, &priv->status); - return 0; - } - - channels = kzalloc(sizeof(struct ieee80211_channel) * - priv->channel_count, GFP_KERNEL); - if (!channels) - return -ENOMEM; - - rates = kzalloc((sizeof(struct ieee80211_rate) * IWL_RATE_COUNT_LEGACY), - GFP_KERNEL); - if (!rates) { - kfree(channels); - return -ENOMEM; - } - - /* 5.2GHz channels start after the 2.4GHz channels */ - sband = &priv->bands[IEEE80211_BAND_5GHZ]; - sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)]; - /* just OFDM */ - sband->bitrates = &rates[IWL_FIRST_OFDM_RATE]; - sband->n_bitrates = IWL_RATE_COUNT_LEGACY - IWL_FIRST_OFDM_RATE; - - if (priv->cfg->sku & IWL_SKU_N) - iwlcore_init_ht_hw_capab(priv, &sband->ht_cap, - IEEE80211_BAND_5GHZ); - - sband = &priv->bands[IEEE80211_BAND_2GHZ]; - sband->channels = channels; - /* OFDM & CCK */ - sband->bitrates = rates; - sband->n_bitrates = IWL_RATE_COUNT_LEGACY; - - if (priv->cfg->sku & IWL_SKU_N) - iwlcore_init_ht_hw_capab(priv, &sband->ht_cap, - IEEE80211_BAND_2GHZ); - - priv->ieee_channels = channels; - priv->ieee_rates = rates; - - for (i = 0; i < priv->channel_count; i++) { - ch = &priv->channel_info[i]; - - /* FIXME: might be removed if scan is OK */ - if (!is_channel_valid(ch)) - continue; - - if (is_channel_a_band(ch)) - sband = &priv->bands[IEEE80211_BAND_5GHZ]; - else - sband = &priv->bands[IEEE80211_BAND_2GHZ]; - - geo_ch = &sband->channels[sband->n_channels++]; - - geo_ch->center_freq = - ieee80211_channel_to_frequency(ch->channel); - geo_ch->max_power = ch->max_power_avg; - geo_ch->max_antenna_gain = 0xff; - geo_ch->hw_value = ch->channel; - - if (is_channel_valid(ch)) { - if (!(ch->flags & EEPROM_CHANNEL_IBSS)) - geo_ch->flags |= IEEE80211_CHAN_NO_IBSS; - - if (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) - geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN; - - if (ch->flags & EEPROM_CHANNEL_RADAR) - geo_ch->flags |= IEEE80211_CHAN_RADAR; - - geo_ch->flags |= ch->ht40_extension_channel; - - if (ch->max_power_avg > priv->tx_power_device_lmt) - priv->tx_power_device_lmt = ch->max_power_avg; - } else { - geo_ch->flags |= IEEE80211_CHAN_DISABLED; - } - - IWL_DEBUG_INFO(priv, "Channel %d Freq=%d[%sGHz] %s flag=0x%X\n", - ch->channel, geo_ch->center_freq, - is_channel_a_band(ch) ? "5.2" : "2.4", - geo_ch->flags & IEEE80211_CHAN_DISABLED ? - "restricted" : "valid", - geo_ch->flags); - } - - if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) && - priv->cfg->sku & IWL_SKU_A) { - IWL_INFO(priv, "Incorrectly detected BG card as ABG. " - "Please send your PCI ID 0x%04X:0x%04X to maintainer.\n", - priv->pci_dev->device, - priv->pci_dev->subsystem_device); - priv->cfg->sku &= ~IWL_SKU_A; - } - - IWL_INFO(priv, "Tunable channels: %d 802.11bg, %d 802.11a channels\n", - priv->bands[IEEE80211_BAND_2GHZ].n_channels, - priv->bands[IEEE80211_BAND_5GHZ].n_channels); - - set_bit(STATUS_GEO_CONFIGURED, &priv->status); - - return 0; -} -EXPORT_SYMBOL(iwlcore_init_geos); - -/* - * iwlcore_free_geos - undo allocations in iwlcore_init_geos - */ -void iwlcore_free_geos(struct iwl_priv *priv) -{ - kfree(priv->ieee_channels); - kfree(priv->ieee_rates); - clear_bit(STATUS_GEO_CONFIGURED, &priv->status); -} -EXPORT_SYMBOL(iwlcore_free_geos); - -/* - * iwlcore_rts_tx_cmd_flag: Set rts/cts. 3945 and 4965 only share this - * function. - */ -void iwlcore_rts_tx_cmd_flag(struct ieee80211_tx_info *info, - __le32 *tx_flags) -{ - if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) { - *tx_flags |= TX_CMD_FLG_RTS_MSK; - *tx_flags &= ~TX_CMD_FLG_CTS_MSK; - } else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { - *tx_flags &= ~TX_CMD_FLG_RTS_MSK; - *tx_flags |= TX_CMD_FLG_CTS_MSK; - } -} -EXPORT_SYMBOL(iwlcore_rts_tx_cmd_flag); - -static bool is_single_rx_stream(struct iwl_priv *priv) -{ - return !priv->current_ht_config.is_ht || - priv->current_ht_config.single_chain_sufficient; -} - -static u8 iwl_is_channel_extension(struct iwl_priv *priv, - enum ieee80211_band band, - u16 channel, u8 extension_chan_offset) -{ - const struct iwl_channel_info *ch_info; - - ch_info = iwl_get_channel_info(priv, band, channel); - if (!is_channel_valid(ch_info)) - return 0; - - if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE) - return !(ch_info->ht40_extension_channel & - IEEE80211_CHAN_NO_HT40PLUS); - else if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW) - return !(ch_info->ht40_extension_channel & - IEEE80211_CHAN_NO_HT40MINUS); - - return 0; -} - -u8 iwl_is_ht40_tx_allowed(struct iwl_priv *priv, - struct ieee80211_sta_ht_cap *sta_ht_inf) -{ - struct iwl_ht_config *ht_conf = &priv->current_ht_config; - - if (!ht_conf->is_ht || !ht_conf->is_40mhz) - return 0; - - /* We do not check for IEEE80211_HT_CAP_SUP_WIDTH_20_40 - * the bit will not set if it is pure 40MHz case - */ - if (sta_ht_inf) { - if (!sta_ht_inf->ht_supported) - return 0; - } -#ifdef CONFIG_IWLWIFI_DEBUG - if (priv->disable_ht40) - return 0; -#endif - return iwl_is_channel_extension(priv, priv->band, - le16_to_cpu(priv->staging_rxon.channel), - ht_conf->extension_chan_offset); -} -EXPORT_SYMBOL(iwl_is_ht40_tx_allowed); - -static u16 iwl_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val) -{ - u16 new_val = 0; - u16 beacon_factor = 0; - - beacon_factor = (beacon_val + max_beacon_val) / max_beacon_val; - new_val = beacon_val / beacon_factor; - - if (!new_val) - new_val = max_beacon_val; - - return new_val; -} - -void iwl_setup_rxon_timing(struct iwl_priv *priv) -{ - u64 tsf; - s32 interval_tm, rem; - unsigned long flags; - struct ieee80211_conf *conf = NULL; - u16 beacon_int; - - conf = ieee80211_get_hw_conf(priv->hw); - - spin_lock_irqsave(&priv->lock, flags); - priv->rxon_timing.timestamp = cpu_to_le64(priv->timestamp); - priv->rxon_timing.listen_interval = cpu_to_le16(conf->listen_interval); - - if (priv->iw_mode == NL80211_IFTYPE_STATION) { - beacon_int = priv->beacon_int; - priv->rxon_timing.atim_window = 0; - } else { - beacon_int = priv->vif->bss_conf.beacon_int; - - /* TODO: we need to get atim_window from upper stack - * for now we set to 0 */ - priv->rxon_timing.atim_window = 0; - } - - beacon_int = iwl_adjust_beacon_interval(beacon_int, - priv->hw_params.max_beacon_itrvl * 1024); - priv->rxon_timing.beacon_interval = cpu_to_le16(beacon_int); - - tsf = priv->timestamp; /* tsf is modifed by do_div: copy it */ - interval_tm = beacon_int * 1024; - rem = do_div(tsf, interval_tm); - priv->rxon_timing.beacon_init_val = cpu_to_le32(interval_tm - rem); - - spin_unlock_irqrestore(&priv->lock, flags); - IWL_DEBUG_ASSOC(priv, - "beacon interval %d beacon timer %d beacon tim %d\n", - le16_to_cpu(priv->rxon_timing.beacon_interval), - le32_to_cpu(priv->rxon_timing.beacon_init_val), - le16_to_cpu(priv->rxon_timing.atim_window)); -} -EXPORT_SYMBOL(iwl_setup_rxon_timing); - -void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt) -{ - struct iwl_rxon_cmd *rxon = &priv->staging_rxon; - - if (hw_decrypt) - rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK; - else - rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK; - -} -EXPORT_SYMBOL(iwl_set_rxon_hwcrypto); - -/** - * iwl_check_rxon_cmd - validate RXON structure is valid - * - * NOTE: This is really only useful during development and can eventually - * be #ifdef'd out once the driver is stable and folks aren't actively - * making changes - */ -int iwl_check_rxon_cmd(struct iwl_priv *priv) -{ - int error = 0; - int counter = 1; - struct iwl_rxon_cmd *rxon = &priv->staging_rxon; - - if (rxon->flags & RXON_FLG_BAND_24G_MSK) { - error |= le32_to_cpu(rxon->flags & - (RXON_FLG_TGJ_NARROW_BAND_MSK | - RXON_FLG_RADAR_DETECT_MSK)); - if (error) - IWL_WARN(priv, "check 24G fields %d | %d\n", - counter++, error); - } else { - error |= (rxon->flags & RXON_FLG_SHORT_SLOT_MSK) ? - 0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK); - if (error) - IWL_WARN(priv, "check 52 fields %d | %d\n", - counter++, error); - error |= le32_to_cpu(rxon->flags & RXON_FLG_CCK_MSK); - if (error) - IWL_WARN(priv, "check 52 CCK %d | %d\n", - counter++, error); - } - error |= (rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1; - if (error) - IWL_WARN(priv, "check mac addr %d | %d\n", counter++, error); - - /* make sure basic rates 6Mbps and 1Mbps are supported */ - error |= (((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0) && - ((rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0)); - if (error) - IWL_WARN(priv, "check basic rate %d | %d\n", counter++, error); - - error |= (le16_to_cpu(rxon->assoc_id) > 2007); - if (error) - IWL_WARN(priv, "check assoc id %d | %d\n", counter++, error); - - error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) - == (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)); - if (error) - IWL_WARN(priv, "check CCK and short slot %d | %d\n", - counter++, error); - - error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) - == (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)); - if (error) - IWL_WARN(priv, "check CCK & auto detect %d | %d\n", - counter++, error); - - error |= ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK | - RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK); - if (error) - IWL_WARN(priv, "check TGG and auto detect %d | %d\n", - counter++, error); - - if (error) - IWL_WARN(priv, "Tuning to channel %d\n", - le16_to_cpu(rxon->channel)); - - if (error) { - IWL_ERR(priv, "Not a valid iwl_rxon_assoc_cmd field values\n"); - return -1; - } - return 0; -} -EXPORT_SYMBOL(iwl_check_rxon_cmd); - -/** - * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed - * @priv: staging_rxon is compared to active_rxon - * - * If the RXON structure is changing enough to require a new tune, - * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that - * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required. - */ -int iwl_full_rxon_required(struct iwl_priv *priv) -{ - - /* These items are only settable from the full RXON command */ - if (!(iwl_is_associated(priv)) || - compare_ether_addr(priv->staging_rxon.bssid_addr, - priv->active_rxon.bssid_addr) || - compare_ether_addr(priv->staging_rxon.node_addr, - priv->active_rxon.node_addr) || - compare_ether_addr(priv->staging_rxon.wlap_bssid_addr, - priv->active_rxon.wlap_bssid_addr) || - (priv->staging_rxon.dev_type != priv->active_rxon.dev_type) || - (priv->staging_rxon.channel != priv->active_rxon.channel) || - (priv->staging_rxon.air_propagation != - priv->active_rxon.air_propagation) || - (priv->staging_rxon.ofdm_ht_single_stream_basic_rates != - priv->active_rxon.ofdm_ht_single_stream_basic_rates) || - (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates != - priv->active_rxon.ofdm_ht_dual_stream_basic_rates) || - (priv->staging_rxon.ofdm_ht_triple_stream_basic_rates != - priv->active_rxon.ofdm_ht_triple_stream_basic_rates) || - (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id)) - return 1; - - /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can - * be updated with the RXON_ASSOC command -- however only some - * flag transitions are allowed using RXON_ASSOC */ - - /* Check if we are not switching bands */ - if ((priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) != - (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK)) - return 1; - - /* Check if we are switching association toggle */ - if ((priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) != - (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK)) - return 1; - - return 0; -} -EXPORT_SYMBOL(iwl_full_rxon_required); - -u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv) -{ - int i; - int rate_mask; - - /* Set rate mask*/ - if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) - rate_mask = priv->active_rate_basic & IWL_CCK_RATES_MASK; - else - rate_mask = priv->active_rate_basic & IWL_OFDM_RATES_MASK; - - /* Find lowest valid rate */ - for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID; - i = iwl_rates[i].next_ieee) { - if (rate_mask & (1 << i)) - return iwl_rates[i].plcp; - } - - /* No valid rate was found. Assign the lowest one */ - if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) - return IWL_RATE_1M_PLCP; - else - return IWL_RATE_6M_PLCP; -} -EXPORT_SYMBOL(iwl_rate_get_lowest_plcp); - -void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf) -{ - struct iwl_rxon_cmd *rxon = &priv->staging_rxon; - - if (!ht_conf->is_ht) { - rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK | - RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK | - RXON_FLG_HT40_PROT_MSK | - RXON_FLG_HT_PROT_MSK); - return; - } - - /* FIXME: if the definition of ht_protection changed, the "translation" - * will be needed for rxon->flags - */ - rxon->flags |= cpu_to_le32(ht_conf->ht_protection << RXON_FLG_HT_OPERATING_MODE_POS); - - /* Set up channel bandwidth: - * 20 MHz only, 20/40 mixed or pure 40 if ht40 ok */ - /* clear the HT channel mode before set the mode */ - rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK | - RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); - if (iwl_is_ht40_tx_allowed(priv, NULL)) { - /* pure ht40 */ - if (ht_conf->ht_protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) { - rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40; - /* Note: control channel is opposite of extension channel */ - switch (ht_conf->extension_chan_offset) { - case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: - rxon->flags &= ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; - break; - case IEEE80211_HT_PARAM_CHA_SEC_BELOW: - rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; - break; - } - } else { - /* Note: control channel is opposite of extension channel */ - switch (ht_conf->extension_chan_offset) { - case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: - rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); - rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED; - break; - case IEEE80211_HT_PARAM_CHA_SEC_BELOW: - rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; - rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED; - break; - case IEEE80211_HT_PARAM_CHA_SEC_NONE: - default: - /* channel location only valid if in Mixed mode */ - IWL_ERR(priv, "invalid extension channel offset\n"); - break; - } - } - } else { - rxon->flags |= RXON_FLG_CHANNEL_MODE_LEGACY; - } - - if (priv->cfg->ops->hcmd->set_rxon_chain) - priv->cfg->ops->hcmd->set_rxon_chain(priv); - - IWL_DEBUG_ASSOC(priv, "rxon flags 0x%X operation mode :0x%X " - "extension channel offset 0x%x\n", - le32_to_cpu(rxon->flags), ht_conf->ht_protection, - ht_conf->extension_chan_offset); - return; -} -EXPORT_SYMBOL(iwl_set_rxon_ht); - -#define IWL_NUM_RX_CHAINS_MULTIPLE 3 -#define IWL_NUM_RX_CHAINS_SINGLE 2 -#define IWL_NUM_IDLE_CHAINS_DUAL 2 -#define IWL_NUM_IDLE_CHAINS_SINGLE 1 - -/* - * Determine how many receiver/antenna chains to use. - * - * More provides better reception via diversity. Fewer saves power - * at the expense of throughput, but only when not in powersave to - * start with. - * - * MIMO (dual stream) requires at least 2, but works better with 3. - * This does not determine *which* chains to use, just how many. - */ -static int iwl_get_active_rx_chain_count(struct iwl_priv *priv) -{ - /* # of Rx chains to use when expecting MIMO. */ - if (is_single_rx_stream(priv)) - return IWL_NUM_RX_CHAINS_SINGLE; - else - return IWL_NUM_RX_CHAINS_MULTIPLE; -} - -/* - * When we are in power saving mode, unless device support spatial - * multiplexing power save, use the active count for rx chain count. - */ -static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) -{ - int idle_cnt = active_cnt; - bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); - - /* # Rx chains when idling and maybe trying to save power */ - switch (priv->cfg->sm_ps_mode) { - case WLAN_HT_CAP_SM_PS_STATIC: - idle_cnt = (is_cam) ? active_cnt : IWL_NUM_IDLE_CHAINS_SINGLE; - break; - case WLAN_HT_CAP_SM_PS_DYNAMIC: - idle_cnt = (is_cam) ? IWL_NUM_IDLE_CHAINS_DUAL : - IWL_NUM_IDLE_CHAINS_SINGLE; - break; - case WLAN_HT_CAP_SM_PS_DISABLED: - break; - case WLAN_HT_CAP_SM_PS_INVALID: - default: - IWL_ERR(priv, "invalid sm_ps mode %u\n", - priv->cfg->sm_ps_mode); - WARN_ON(1); - break; - } - return idle_cnt; -} - -/* up to 4 chains */ -static u8 iwl_count_chain_bitmap(u32 chain_bitmap) -{ - u8 res; - res = (chain_bitmap & BIT(0)) >> 0; - res += (chain_bitmap & BIT(1)) >> 1; - res += (chain_bitmap & BIT(2)) >> 2; - res += (chain_bitmap & BIT(3)) >> 3; - return res; -} - -/** - * iwl_is_monitor_mode - Determine if interface in monitor mode - * - * priv->iw_mode is set in add_interface, but add_interface is - * never called for monitor mode. The only way mac80211 informs us about - * monitor mode is through configuring filters (call to configure_filter). - */ -bool iwl_is_monitor_mode(struct iwl_priv *priv) -{ - return !!(priv->staging_rxon.filter_flags & RXON_FILTER_PROMISC_MSK); -} -EXPORT_SYMBOL(iwl_is_monitor_mode); - -/** - * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image - * - * Selects how many and which Rx receivers/antennas/chains to use. - * This should not be used for scan command ... it puts data in wrong place. - */ -void iwl_set_rxon_chain(struct iwl_priv *priv) -{ - bool is_single = is_single_rx_stream(priv); - bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); - u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; - u32 active_chains; - u16 rx_chain; - - /* Tell uCode which antennas are actually connected. - * Before first association, we assume all antennas are connected. - * Just after first association, iwl_chain_noise_calibration() - * checks which antennas actually *are* connected. */ - if (priv->chain_noise_data.active_chains) - active_chains = priv->chain_noise_data.active_chains; - else - active_chains = priv->hw_params.valid_rx_ant; - - rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS; - - /* How many receivers should we use? */ - active_rx_cnt = iwl_get_active_rx_chain_count(priv); - idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt); - - - /* correct rx chain count according hw settings - * and chain noise calibration - */ - valid_rx_cnt = iwl_count_chain_bitmap(active_chains); - if (valid_rx_cnt < active_rx_cnt) - active_rx_cnt = valid_rx_cnt; - - if (valid_rx_cnt < idle_rx_cnt) - idle_rx_cnt = valid_rx_cnt; - - rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; - rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; - - /* copied from 'iwl_bg_request_scan()' */ - /* Force use of chains B and C (0x6) for Rx for 4965 - * Avoid A (0x1) because of its off-channel reception on A-band. - * MIMO is not used here, but value is required */ - if (iwl_is_monitor_mode(priv) && - !(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) && - ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)) { - rx_chain = ANT_ABC << RXON_RX_CHAIN_VALID_POS; - rx_chain |= ANT_BC << RXON_RX_CHAIN_FORCE_SEL_POS; - rx_chain |= ANT_ABC << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; - rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS; - } - - priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain); - - if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam) - priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; - else - priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; - - IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n", - priv->staging_rxon.rx_chain, - active_rx_cnt, idle_rx_cnt); - - WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || - active_rx_cnt < idle_rx_cnt); -} -EXPORT_SYMBOL(iwl_set_rxon_chain); - -/** - * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON - * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz - * @channel: Any channel valid for the requested phymode - - * In addition to setting the staging RXON, priv->phymode is also set. - * - * NOTE: Does not commit to the hardware; it sets appropriate bit fields - * in the staging RXON flag structure based on the phymode - */ -int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch) -{ - enum ieee80211_band band = ch->band; - u16 channel = ieee80211_frequency_to_channel(ch->center_freq); - - if (!iwl_get_channel_info(priv, band, channel)) { - IWL_DEBUG_INFO(priv, "Could not set channel to %d [%d]\n", - channel, band); - return -EINVAL; - } - - if ((le16_to_cpu(priv->staging_rxon.channel) == channel) && - (priv->band == band)) - return 0; - - priv->staging_rxon.channel = cpu_to_le16(channel); - if (band == IEEE80211_BAND_5GHZ) - priv->staging_rxon.flags &= ~RXON_FLG_BAND_24G_MSK; - else - priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK; - - priv->band = band; - - IWL_DEBUG_INFO(priv, "Staging channel set to %d [%d]\n", channel, band); - - return 0; -} -EXPORT_SYMBOL(iwl_set_rxon_channel); - -void iwl_set_flags_for_band(struct iwl_priv *priv, - enum ieee80211_band band) -{ - if (band == IEEE80211_BAND_5GHZ) { - priv->staging_rxon.flags &= - ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK - | RXON_FLG_CCK_MSK); - priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; - } else { - /* Copied from iwl_post_associate() */ - if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME) - priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; - else - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - - if (priv->iw_mode == NL80211_IFTYPE_ADHOC) - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - - priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK; - priv->staging_rxon.flags |= RXON_FLG_AUTO_DETECT_MSK; - priv->staging_rxon.flags &= ~RXON_FLG_CCK_MSK; - } -} - -/* - * initialize rxon structure with default values from eeprom - */ -void iwl_connection_init_rx_config(struct iwl_priv *priv, int mode) -{ - const struct iwl_channel_info *ch_info; - - memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon)); - - switch (mode) { - case NL80211_IFTYPE_AP: - priv->staging_rxon.dev_type = RXON_DEV_TYPE_AP; - break; - - case NL80211_IFTYPE_STATION: - priv->staging_rxon.dev_type = RXON_DEV_TYPE_ESS; - priv->staging_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK; - break; - - case NL80211_IFTYPE_ADHOC: - priv->staging_rxon.dev_type = RXON_DEV_TYPE_IBSS; - priv->staging_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK; - priv->staging_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK | - RXON_FILTER_ACCEPT_GRP_MSK; - break; - - default: - IWL_ERR(priv, "Unsupported interface type %d\n", mode); - break; - } - -#if 0 - /* TODO: Figure out when short_preamble would be set and cache from - * that */ - if (!hw_to_local(priv->hw)->short_preamble) - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; - else - priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; -#endif - - ch_info = iwl_get_channel_info(priv, priv->band, - le16_to_cpu(priv->active_rxon.channel)); - - if (!ch_info) - ch_info = &priv->channel_info[0]; - - /* - * in some case A channels are all non IBSS - * in this case force B/G channel - */ - if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) && - !(is_channel_ibss(ch_info))) - ch_info = &priv->channel_info[0]; - - priv->staging_rxon.channel = cpu_to_le16(ch_info->channel); - priv->band = ch_info->band; - - iwl_set_flags_for_band(priv, priv->band); - - priv->staging_rxon.ofdm_basic_rates = - (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; - priv->staging_rxon.cck_basic_rates = - (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; - - /* clear both MIX and PURE40 mode flag */ - priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED | - RXON_FLG_CHANNEL_MODE_PURE_40); - memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); - memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN); - priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff; - priv->staging_rxon.ofdm_ht_dual_stream_basic_rates = 0xff; - priv->staging_rxon.ofdm_ht_triple_stream_basic_rates = 0xff; -} -EXPORT_SYMBOL(iwl_connection_init_rx_config); - -static void iwl_set_rate(struct iwl_priv *priv) -{ - const struct ieee80211_supported_band *hw = NULL; - struct ieee80211_rate *rate; - int i; - - hw = iwl_get_hw_mode(priv, priv->band); - if (!hw) { - IWL_ERR(priv, "Failed to set rate: unable to get hw mode\n"); - return; - } - - priv->active_rate = 0; - priv->active_rate_basic = 0; - - for (i = 0; i < hw->n_bitrates; i++) { - rate = &(hw->bitrates[i]); - if (rate->hw_value < IWL_RATE_COUNT_LEGACY) - priv->active_rate |= (1 << rate->hw_value); - } - - IWL_DEBUG_RATE(priv, "Set active_rate = %0x, active_rate_basic = %0x\n", - priv->active_rate, priv->active_rate_basic); - - /* - * If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK) - * otherwise set it to the default of all CCK rates and 6, 12, 24 for - * OFDM - */ - if (priv->active_rate_basic & IWL_CCK_BASIC_RATES_MASK) - priv->staging_rxon.cck_basic_rates = - ((priv->active_rate_basic & - IWL_CCK_RATES_MASK) >> IWL_FIRST_CCK_RATE) & 0xF; - else - priv->staging_rxon.cck_basic_rates = - (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; - - if (priv->active_rate_basic & IWL_OFDM_BASIC_RATES_MASK) - priv->staging_rxon.ofdm_basic_rates = - ((priv->active_rate_basic & - (IWL_OFDM_BASIC_RATES_MASK | IWL_RATE_6M_MASK)) >> - IWL_FIRST_OFDM_RATE) & 0xFF; - else - priv->staging_rxon.ofdm_basic_rates = - (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; -} - -void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_rxon_cmd *rxon = (void *)&priv->active_rxon; - struct iwl_csa_notification *csa = &(pkt->u.csa_notif); - - if (priv->switch_rxon.switch_in_progress) { - if (!le32_to_cpu(csa->status) && - (csa->channel == priv->switch_rxon.channel)) { - rxon->channel = csa->channel; - priv->staging_rxon.channel = csa->channel; - IWL_DEBUG_11H(priv, "CSA notif: channel %d\n", - le16_to_cpu(csa->channel)); - } else - IWL_ERR(priv, "CSA notif (fail) : channel %d\n", - le16_to_cpu(csa->channel)); - - priv->switch_rxon.switch_in_progress = false; - } -} -EXPORT_SYMBOL(iwl_rx_csa); - -#ifdef CONFIG_IWLWIFI_DEBUG -void iwl_print_rx_config_cmd(struct iwl_priv *priv) -{ - struct iwl_rxon_cmd *rxon = &priv->staging_rxon; - - IWL_DEBUG_RADIO(priv, "RX CONFIG:\n"); - iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon)); - IWL_DEBUG_RADIO(priv, "u16 channel: 0x%x\n", le16_to_cpu(rxon->channel)); - IWL_DEBUG_RADIO(priv, "u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags)); - IWL_DEBUG_RADIO(priv, "u32 filter_flags: 0x%08x\n", - le32_to_cpu(rxon->filter_flags)); - IWL_DEBUG_RADIO(priv, "u8 dev_type: 0x%x\n", rxon->dev_type); - IWL_DEBUG_RADIO(priv, "u8 ofdm_basic_rates: 0x%02x\n", - rxon->ofdm_basic_rates); - IWL_DEBUG_RADIO(priv, "u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates); - IWL_DEBUG_RADIO(priv, "u8[6] node_addr: %pM\n", rxon->node_addr); - IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr); - IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id)); -} -EXPORT_SYMBOL(iwl_print_rx_config_cmd); -#endif -/** - * iwl_irq_handle_error - called for HW or SW error interrupt from card - */ -void iwl_irq_handle_error(struct iwl_priv *priv) -{ - /* Set the FW error flag -- cleared on iwl_down */ - set_bit(STATUS_FW_ERROR, &priv->status); - - /* Cancel currently queued command. */ - clear_bit(STATUS_HCMD_ACTIVE, &priv->status); - - priv->cfg->ops->lib->dump_nic_error_log(priv); - priv->cfg->ops->lib->dump_nic_event_log(priv, false); -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) - iwl_print_rx_config_cmd(priv); -#endif - - wake_up_interruptible(&priv->wait_command_queue); - - /* Keep the restart process from trying to send host - * commands by clearing the INIT status bit */ - clear_bit(STATUS_READY, &priv->status); - - if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) { - IWL_DEBUG(priv, IWL_DL_FW_ERRORS, - "Restarting adapter due to uCode error.\n"); - - if (priv->cfg->mod_params->restart_fw) - queue_work(priv->workqueue, &priv->restart); - } -} -EXPORT_SYMBOL(iwl_irq_handle_error); - -int iwl_apm_stop_master(struct iwl_priv *priv) -{ - int ret = 0; - - /* stop device's busmaster DMA activity */ - iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER); - - ret = iwl_poll_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_MASTER_DISABLED, - CSR_RESET_REG_FLAG_MASTER_DISABLED, 100); - if (ret) - IWL_WARN(priv, "Master Disable Timed Out, 100 usec\n"); - - IWL_DEBUG_INFO(priv, "stop master\n"); - - return ret; -} -EXPORT_SYMBOL(iwl_apm_stop_master); - -void iwl_apm_stop(struct iwl_priv *priv) -{ - IWL_DEBUG_INFO(priv, "Stop card, put in low power state\n"); - - /* Stop device's DMA activity */ - iwl_apm_stop_master(priv); - - /* Reset the entire device */ - iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); - - udelay(10); - - /* - * Clear "initialization complete" bit to move adapter from - * D0A* (powered-up Active) --> D0U* (Uninitialized) state. - */ - iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); -} -EXPORT_SYMBOL(iwl_apm_stop); - - -/* - * Start up NIC's basic functionality after it has been reset - * (e.g. after platform boot, or shutdown via iwl_apm_stop()) - * NOTE: This does not load uCode nor start the embedded processor - */ -int iwl_apm_init(struct iwl_priv *priv) -{ - int ret = 0; - u16 lctl; - - IWL_DEBUG_INFO(priv, "Init card's basic functions\n"); - - /* - * Use "set_bit" below rather than "write", to preserve any hardware - * bits already set by default after reset. - */ - - /* Disable L0S exit timer (platform NMI Work/Around) */ - iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, - CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); - - /* - * Disable L0s without affecting L1; - * don't wait for ICH L0s (ICH bug W/A) - */ - iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, - CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); - - /* Set FH wait threshold to maximum (HW error during stress W/A) */ - iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL); - - /* - * Enable HAP INTA (interrupt from management bus) to - * wake device's PCI Express link L1a -> L0s - * NOTE: This is no-op for 3945 (non-existant bit) - */ - iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A); - - /* - * HW bug W/A for instability in PCIe bus L0->L0S->L1 transition. - * Check if BIOS (or OS) enabled L1-ASPM on this device. - * If so (likely), disable L0S, so device moves directly L0->L1; - * costs negligible amount of power savings. - * If not (unlikely), enable L0S, so there is at least some - * power savings, even without L1. - */ - if (priv->cfg->set_l0s) { - lctl = iwl_pcie_link_ctl(priv); - if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) == - PCI_CFG_LINK_CTRL_VAL_L1_EN) { - /* L1-ASPM enabled; disable(!) L0S */ - iwl_set_bit(priv, CSR_GIO_REG, - CSR_GIO_REG_VAL_L0S_ENABLED); - IWL_DEBUG_POWER(priv, "L1 Enabled; Disabling L0S\n"); - } else { - /* L1-ASPM disabled; enable(!) L0S */ - iwl_clear_bit(priv, CSR_GIO_REG, - CSR_GIO_REG_VAL_L0S_ENABLED); - IWL_DEBUG_POWER(priv, "L1 Disabled; Enabling L0S\n"); - } - } - - /* Configure analog phase-lock-loop before activating to D0A */ - if (priv->cfg->pll_cfg_val) - iwl_set_bit(priv, CSR_ANA_PLL_CFG, priv->cfg->pll_cfg_val); - - /* - * Set "initialization complete" bit to move adapter from - * D0U* --> D0A* (powered-up active) state. - */ - iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - - /* - * Wait for clock stabilization; once stabilized, access to - * device-internal resources is supported, e.g. iwl_write_prph() - * and accesses to uCode SRAM. - */ - ret = iwl_poll_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); - if (ret < 0) { - IWL_DEBUG_INFO(priv, "Failed to init the card\n"); - goto out; - } - - /* - * Enable DMA and BSM (if used) clocks, wait for them to stabilize. - * BSM (Boostrap State Machine) is only in 3945 and 4965; - * later devices (i.e. 5000 and later) have non-volatile SRAM, - * and don't need BSM to restore data after power-saving sleep. - * - * Write to "CLK_EN_REG"; "1" bits enable clocks, while "0" bits - * do not disable clocks. This preserves any hardware bits already - * set by default in "CLK_CTRL_REG" after reset. - */ - if (priv->cfg->use_bsm) - iwl_write_prph(priv, APMG_CLK_EN_REG, - APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT); - else - iwl_write_prph(priv, APMG_CLK_EN_REG, - APMG_CLK_VAL_DMA_CLK_RQT); - udelay(20); - - /* Disable L1-Active */ - iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, - APMG_PCIDEV_STT_VAL_L1_ACT_DIS); - -out: - return ret; -} -EXPORT_SYMBOL(iwl_apm_init); - - - -void iwl_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - u64 multicast) -{ - struct iwl_priv *priv = hw->priv; - __le32 *filter_flags = &priv->staging_rxon.filter_flags; - - IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n", - changed_flags, *total_flags); - - if (changed_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS)) { - if (*total_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS)) - *filter_flags |= RXON_FILTER_PROMISC_MSK; - else - *filter_flags &= ~RXON_FILTER_PROMISC_MSK; - } - if (changed_flags & FIF_ALLMULTI) { - if (*total_flags & FIF_ALLMULTI) - *filter_flags |= RXON_FILTER_ACCEPT_GRP_MSK; - else - *filter_flags &= ~RXON_FILTER_ACCEPT_GRP_MSK; - } - if (changed_flags & FIF_CONTROL) { - if (*total_flags & FIF_CONTROL) - *filter_flags |= RXON_FILTER_CTL2HOST_MSK; - else - *filter_flags &= ~RXON_FILTER_CTL2HOST_MSK; - } - if (changed_flags & FIF_BCN_PRBRESP_PROMISC) { - if (*total_flags & FIF_BCN_PRBRESP_PROMISC) - *filter_flags |= RXON_FILTER_BCON_AWARE_MSK; - else - *filter_flags &= ~RXON_FILTER_BCON_AWARE_MSK; - } - - /* We avoid iwl_commit_rxon here to commit the new filter flags - * since mac80211 will call ieee80211_hw_config immediately. - * (mc_list is not supported at this time). Otherwise, we need to - * queue a background iwl_commit_rxon work. - */ - - *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | - FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; -} -EXPORT_SYMBOL(iwl_configure_filter); - -int iwl_set_hw_params(struct iwl_priv *priv) -{ - priv->hw_params.max_rxq_size = RX_QUEUE_SIZE; - priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; - if (priv->cfg->mod_params->amsdu_size_8K) - priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_8K); - else - priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_4K); - - priv->hw_params.max_beacon_itrvl = IWL_MAX_UCODE_BEACON_INTERVAL; - - if (priv->cfg->mod_params->disable_11n) - priv->cfg->sku &= ~IWL_SKU_N; - - /* Device-specific setup */ - return priv->cfg->ops->lib->set_hw_params(priv); -} -EXPORT_SYMBOL(iwl_set_hw_params); - -int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) -{ - int ret = 0; - s8 prev_tx_power = priv->tx_power_user_lmt; - - if (tx_power < IWL_TX_POWER_TARGET_POWER_MIN) { - IWL_WARN(priv, "Requested user TXPOWER %d below lower limit %d.\n", - tx_power, - IWL_TX_POWER_TARGET_POWER_MIN); - return -EINVAL; - } - - if (tx_power > priv->tx_power_device_lmt) { - IWL_WARN(priv, - "Requested user TXPOWER %d above upper limit %d.\n", - tx_power, priv->tx_power_device_lmt); - return -EINVAL; - } - - if (priv->tx_power_user_lmt != tx_power) - force = true; - - /* if nic is not up don't send command */ - if (iwl_is_ready_rf(priv)) { - priv->tx_power_user_lmt = tx_power; - if (force && priv->cfg->ops->lib->send_tx_power) - ret = priv->cfg->ops->lib->send_tx_power(priv); - else if (!priv->cfg->ops->lib->send_tx_power) - ret = -EOPNOTSUPP; - /* - * if fail to set tx_power, restore the orig. tx power - */ - if (ret) - priv->tx_power_user_lmt = prev_tx_power; - } - - /* - * Even this is an async host command, the command - * will always report success from uCode - * So once driver can placing the command into the queue - * successfully, driver can use priv->tx_power_user_lmt - * to reflect the current tx power - */ - return ret; -} -EXPORT_SYMBOL(iwl_set_tx_power); - -#define ICT_COUNT (PAGE_SIZE/sizeof(u32)) - -/* Free dram table */ -void iwl_free_isr_ict(struct iwl_priv *priv) -{ - if (priv->ict_tbl_vir) { - pci_free_consistent(priv->pci_dev, (sizeof(u32) * ICT_COUNT) + - PAGE_SIZE, priv->ict_tbl_vir, - priv->ict_tbl_dma); - priv->ict_tbl_vir = NULL; - } -} -EXPORT_SYMBOL(iwl_free_isr_ict); - - -/* allocate dram shared table it is a PAGE_SIZE aligned - * also reset all data related to ICT table interrupt. - */ -int iwl_alloc_isr_ict(struct iwl_priv *priv) -{ - - if (priv->cfg->use_isr_legacy) - return 0; - /* allocate shrared data table */ - priv->ict_tbl_vir = pci_alloc_consistent(priv->pci_dev, (sizeof(u32) * - ICT_COUNT) + PAGE_SIZE, - &priv->ict_tbl_dma); - if (!priv->ict_tbl_vir) - return -ENOMEM; - - /* align table to PAGE_SIZE boundry */ - priv->aligned_ict_tbl_dma = ALIGN(priv->ict_tbl_dma, PAGE_SIZE); - - IWL_DEBUG_ISR(priv, "ict dma addr %Lx dma aligned %Lx diff %d\n", - (unsigned long long)priv->ict_tbl_dma, - (unsigned long long)priv->aligned_ict_tbl_dma, - (int)(priv->aligned_ict_tbl_dma - priv->ict_tbl_dma)); - - priv->ict_tbl = priv->ict_tbl_vir + - (priv->aligned_ict_tbl_dma - priv->ict_tbl_dma); - - IWL_DEBUG_ISR(priv, "ict vir addr %p vir aligned %p diff %d\n", - priv->ict_tbl, priv->ict_tbl_vir, - (int)(priv->aligned_ict_tbl_dma - priv->ict_tbl_dma)); - - /* reset table and index to all 0 */ - memset(priv->ict_tbl_vir,0, (sizeof(u32) * ICT_COUNT) + PAGE_SIZE); - priv->ict_index = 0; - - /* add periodic RX interrupt */ - priv->inta_mask |= CSR_INT_BIT_RX_PERIODIC; - return 0; -} -EXPORT_SYMBOL(iwl_alloc_isr_ict); - -/* Device is going up inform it about using ICT interrupt table, - * also we need to tell the driver to start using ICT interrupt. - */ -int iwl_reset_ict(struct iwl_priv *priv) -{ - u32 val; - unsigned long flags; - - if (!priv->ict_tbl_vir) - return 0; - - spin_lock_irqsave(&priv->lock, flags); - iwl_disable_interrupts(priv); - - memset(&priv->ict_tbl[0], 0, sizeof(u32) * ICT_COUNT); - - val = priv->aligned_ict_tbl_dma >> PAGE_SHIFT; - - val |= CSR_DRAM_INT_TBL_ENABLE; - val |= CSR_DRAM_INIT_TBL_WRAP_CHECK; - - IWL_DEBUG_ISR(priv, "CSR_DRAM_INT_TBL_REG =0x%X " - "aligned dma address %Lx\n", - val, (unsigned long long)priv->aligned_ict_tbl_dma); - - iwl_write32(priv, CSR_DRAM_INT_TBL_REG, val); - priv->use_ict = true; - priv->ict_index = 0; - iwl_write32(priv, CSR_INT, priv->inta_mask); - iwl_enable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} -EXPORT_SYMBOL(iwl_reset_ict); - -/* Device is going down disable ict interrupt usage */ -void iwl_disable_ict(struct iwl_priv *priv) -{ - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - priv->use_ict = false; - spin_unlock_irqrestore(&priv->lock, flags); -} -EXPORT_SYMBOL(iwl_disable_ict); - -/* interrupt handler using ict table, with this interrupt driver will - * stop using INTA register to get device's interrupt, reading this register - * is expensive, device will write interrupts in ICT dram table, increment - * index then will fire interrupt to driver, driver will OR all ICT table - * entries from current index up to table entry with 0 value. the result is - * the interrupt we need to service, driver will set the entries back to 0 and - * set index. - */ -irqreturn_t iwl_isr_ict(int irq, void *data) -{ - struct iwl_priv *priv = data; - u32 inta, inta_mask; - u32 val = 0; - - if (!priv) - return IRQ_NONE; - - /* dram interrupt table not set yet, - * use legacy interrupt. - */ - if (!priv->use_ict) - return iwl_isr(irq, data); - - spin_lock(&priv->lock); - - /* Disable (but don't clear!) interrupts here to avoid - * back-to-back ISRs and sporadic interrupts from our NIC. - * If we have something to service, the tasklet will re-enable ints. - * If we *don't* have something, we'll re-enable before leaving here. - */ - inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */ - iwl_write32(priv, CSR_INT_MASK, 0x00000000); - - - /* Ignore interrupt if there's nothing in NIC to service. - * This may be due to IRQ shared with another device, - * or due to sporadic interrupts thrown from our NIC. */ - if (!priv->ict_tbl[priv->ict_index]) { - IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0\n"); - goto none; - } - - /* read all entries that not 0 start with ict_index */ - while (priv->ict_tbl[priv->ict_index]) { - - val |= le32_to_cpu(priv->ict_tbl[priv->ict_index]); - IWL_DEBUG_ISR(priv, "ICT index %d value 0x%08X\n", - priv->ict_index, - le32_to_cpu(priv->ict_tbl[priv->ict_index])); - priv->ict_tbl[priv->ict_index] = 0; - priv->ict_index = iwl_queue_inc_wrap(priv->ict_index, - ICT_COUNT); - - } - - /* We should not get this value, just ignore it. */ - if (val == 0xffffffff) - val = 0; - - inta = (0xff & val) | ((0xff00 & val) << 16); - IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x ict 0x%08x\n", - inta, inta_mask, val); - - inta &= priv->inta_mask; - priv->inta |= inta; - - /* iwl_irq_tasklet() will service interrupts and re-enable them */ - if (likely(inta)) - tasklet_schedule(&priv->irq_tasklet); - else if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta) { - /* Allow interrupt if was disabled by this handler and - * no tasklet was schedules, We should not enable interrupt, - * tasklet will enable it. - */ - iwl_enable_interrupts(priv); - } - - spin_unlock(&priv->lock); - return IRQ_HANDLED; - - none: - /* re-enable interrupts here since we don't have anything to service. - * only Re-enable if disabled by irq. - */ - if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta) - iwl_enable_interrupts(priv); - - spin_unlock(&priv->lock); - return IRQ_NONE; -} -EXPORT_SYMBOL(iwl_isr_ict); - - -static irqreturn_t iwl_isr(int irq, void *data) -{ - struct iwl_priv *priv = data; - u32 inta, inta_mask; -#ifdef CONFIG_IWLWIFI_DEBUG - u32 inta_fh; -#endif - if (!priv) - return IRQ_NONE; - - spin_lock(&priv->lock); - - /* Disable (but don't clear!) interrupts here to avoid - * back-to-back ISRs and sporadic interrupts from our NIC. - * If we have something to service, the tasklet will re-enable ints. - * If we *don't* have something, we'll re-enable before leaving here. */ - inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */ - iwl_write32(priv, CSR_INT_MASK, 0x00000000); - - /* Discover which interrupts are active/pending */ - inta = iwl_read32(priv, CSR_INT); - - /* Ignore interrupt if there's nothing in NIC to service. - * This may be due to IRQ shared with another device, - * or due to sporadic interrupts thrown from our NIC. */ - if (!inta) { - IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0\n"); - goto none; - } - - if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) { - /* Hardware disappeared. It might have already raised - * an interrupt */ - IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta); - goto unplugged; - } - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) { - inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); - IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, " - "fh 0x%08x\n", inta, inta_mask, inta_fh); - } -#endif - - priv->inta |= inta; - /* iwl_irq_tasklet() will service interrupts and re-enable them */ - if (likely(inta)) - tasklet_schedule(&priv->irq_tasklet); - else if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta) - iwl_enable_interrupts(priv); - - unplugged: - spin_unlock(&priv->lock); - return IRQ_HANDLED; - - none: - /* re-enable interrupts here since we don't have anything to service. */ - /* only Re-enable if diabled by irq and no schedules tasklet. */ - if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta) - iwl_enable_interrupts(priv); - - spin_unlock(&priv->lock); - return IRQ_NONE; -} - -irqreturn_t iwl_isr_legacy(int irq, void *data) -{ - struct iwl_priv *priv = data; - u32 inta, inta_mask; - u32 inta_fh; - if (!priv) - return IRQ_NONE; - - spin_lock(&priv->lock); - - /* Disable (but don't clear!) interrupts here to avoid - * back-to-back ISRs and sporadic interrupts from our NIC. - * If we have something to service, the tasklet will re-enable ints. - * If we *don't* have something, we'll re-enable before leaving here. */ - inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */ - iwl_write32(priv, CSR_INT_MASK, 0x00000000); - - /* Discover which interrupts are active/pending */ - inta = iwl_read32(priv, CSR_INT); - inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); - - /* Ignore interrupt if there's nothing in NIC to service. - * This may be due to IRQ shared with another device, - * or due to sporadic interrupts thrown from our NIC. */ - if (!inta && !inta_fh) { - IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0, inta_fh == 0\n"); - goto none; - } - - if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) { - /* Hardware disappeared. It might have already raised - * an interrupt */ - IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta); - goto unplugged; - } - - IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", - inta, inta_mask, inta_fh); - - inta &= ~CSR_INT_BIT_SCD; - - /* iwl_irq_tasklet() will service interrupts and re-enable them */ - if (likely(inta || inta_fh)) - tasklet_schedule(&priv->irq_tasklet); - - unplugged: - spin_unlock(&priv->lock); - return IRQ_HANDLED; - - none: - /* re-enable interrupts here since we don't have anything to service. */ - /* only Re-enable if diabled by irq */ - if (test_bit(STATUS_INT_ENABLED, &priv->status)) - iwl_enable_interrupts(priv); - spin_unlock(&priv->lock); - return IRQ_NONE; -} -EXPORT_SYMBOL(iwl_isr_legacy); - -int iwl_send_bt_config(struct iwl_priv *priv) -{ - struct iwl_bt_cmd bt_cmd = { - .flags = BT_COEX_MODE_4W, - .lead_time = BT_LEAD_TIME_DEF, - .max_kill = BT_MAX_KILL_DEF, - .kill_ack_mask = 0, - .kill_cts_mask = 0, - }; - - return iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, - sizeof(struct iwl_bt_cmd), &bt_cmd); -} -EXPORT_SYMBOL(iwl_send_bt_config); - -int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear) -{ - struct iwl_statistics_cmd statistics_cmd = { - .configuration_flags = - clear ? IWL_STATS_CONF_CLEAR_STATS : 0, - }; - - if (flags & CMD_ASYNC) - return iwl_send_cmd_pdu_async(priv, REPLY_STATISTICS_CMD, - sizeof(struct iwl_statistics_cmd), - &statistics_cmd, NULL); - else - return iwl_send_cmd_pdu(priv, REPLY_STATISTICS_CMD, - sizeof(struct iwl_statistics_cmd), - &statistics_cmd); -} -EXPORT_SYMBOL(iwl_send_statistics_request); - -/** - * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host, - * using sample data 100 bytes apart. If these sample points are good, - * it's a pretty good bet that everything between them is good, too. - */ -static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len) -{ - u32 val; - int ret = 0; - u32 errcnt = 0; - u32 i; - - IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len); - - for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) { - /* read data comes through single port, auto-incr addr */ - /* NOTE: Use the debugless read so we don't flood kernel log - * if IWL_DL_IO is set */ - iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, - i + IWL49_RTC_INST_LOWER_BOUND); - val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - if (val != le32_to_cpu(*image)) { - ret = -EIO; - errcnt++; - if (errcnt >= 3) - break; - } - } - - return ret; -} - -/** - * iwlcore_verify_inst_full - verify runtime uCode image in card vs. host, - * looking at all data. - */ -static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image, - u32 len) -{ - u32 val; - u32 save_len = len; - int ret = 0; - u32 errcnt; - - IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len); - - iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, - IWL49_RTC_INST_LOWER_BOUND); - - errcnt = 0; - for (; len > 0; len -= sizeof(u32), image++) { - /* read data comes through single port, auto-incr addr */ - /* NOTE: Use the debugless read so we don't flood kernel log - * if IWL_DL_IO is set */ - val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - if (val != le32_to_cpu(*image)) { - IWL_ERR(priv, "uCode INST section is invalid at " - "offset 0x%x, is 0x%x, s/b 0x%x\n", - save_len - len, val, le32_to_cpu(*image)); - ret = -EIO; - errcnt++; - if (errcnt >= 20) - break; - } - } - - if (!errcnt) - IWL_DEBUG_INFO(priv, - "ucode image in INSTRUCTION memory is good\n"); - - return ret; -} - -/** - * iwl_verify_ucode - determine which instruction image is in SRAM, - * and verify its contents - */ -int iwl_verify_ucode(struct iwl_priv *priv) -{ - __le32 *image; - u32 len; - int ret; - - /* Try bootstrap */ - image = (__le32 *)priv->ucode_boot.v_addr; - len = priv->ucode_boot.len; - ret = iwlcore_verify_inst_sparse(priv, image, len); - if (!ret) { - IWL_DEBUG_INFO(priv, "Bootstrap uCode is good in inst SRAM\n"); - return 0; - } - - /* Try initialize */ - image = (__le32 *)priv->ucode_init.v_addr; - len = priv->ucode_init.len; - ret = iwlcore_verify_inst_sparse(priv, image, len); - if (!ret) { - IWL_DEBUG_INFO(priv, "Initialize uCode is good in inst SRAM\n"); - return 0; - } - - /* Try runtime/protocol */ - image = (__le32 *)priv->ucode_code.v_addr; - len = priv->ucode_code.len; - ret = iwlcore_verify_inst_sparse(priv, image, len); - if (!ret) { - IWL_DEBUG_INFO(priv, "Runtime uCode is good in inst SRAM\n"); - return 0; - } - - IWL_ERR(priv, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n"); - - /* Since nothing seems to match, show first several data entries in - * instruction SRAM, so maybe visual inspection will give a clue. - * Selection of bootstrap image (vs. other images) is arbitrary. */ - image = (__le32 *)priv->ucode_boot.v_addr; - len = priv->ucode_boot.len; - ret = iwl_verify_inst_full(priv, image, len); - - return ret; -} -EXPORT_SYMBOL(iwl_verify_ucode); - - -void iwl_rf_kill_ct_config(struct iwl_priv *priv) -{ - struct iwl_ct_kill_config cmd; - struct iwl_ct_kill_throttling_config adv_cmd; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&priv->lock, flags); - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); - spin_unlock_irqrestore(&priv->lock, flags); - priv->thermal_throttle.ct_kill_toggle = false; - - if (priv->cfg->support_ct_kill_exit) { - adv_cmd.critical_temperature_enter = - cpu_to_le32(priv->hw_params.ct_kill_threshold); - adv_cmd.critical_temperature_exit = - cpu_to_le32(priv->hw_params.ct_kill_exit_threshold); - - ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD, - sizeof(adv_cmd), &adv_cmd); - if (ret) - IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); - else - IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " - "succeeded, " - "critical temperature enter is %d," - "exit is %d\n", - priv->hw_params.ct_kill_threshold, - priv->hw_params.ct_kill_exit_threshold); - } else { - cmd.critical_temperature_R = - cpu_to_le32(priv->hw_params.ct_kill_threshold); - - ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD, - sizeof(cmd), &cmd); - if (ret) - IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); - else - IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " - "succeeded, " - "critical temperature is %d\n", - priv->hw_params.ct_kill_threshold); - } -} -EXPORT_SYMBOL(iwl_rf_kill_ct_config); - - -/* - * CARD_STATE_CMD - * - * Use: Sets the device's internal card state to enable, disable, or halt - * - * When in the 'enable' state the card operates as normal. - * When in the 'disable' state, the card enters into a low power mode. - * When in the 'halt' state, the card is shut down and must be fully - * restarted to come back on. - */ -int iwl_send_card_state(struct iwl_priv *priv, u32 flags, u8 meta_flag) -{ - struct iwl_host_cmd cmd = { - .id = REPLY_CARD_STATE_CMD, - .len = sizeof(u32), - .data = &flags, - .flags = meta_flag, - }; - - return iwl_send_cmd(priv, &cmd); -} - -void iwl_rx_pm_sleep_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_sleep_notification *sleep = &(pkt->u.sleep_notif); - IWL_DEBUG_RX(priv, "sleep mode: %d, src: %d\n", - sleep->pm_sleep_mode, sleep->pm_wakeup_src); -#endif -} -EXPORT_SYMBOL(iwl_rx_pm_sleep_notif); - -void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - u32 len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; - IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled " - "notification for %s:\n", len, - get_cmd_string(pkt->hdr.cmd)); - iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, len); -} -EXPORT_SYMBOL(iwl_rx_pm_debug_statistics_notif); - -void iwl_rx_reply_error(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - - IWL_ERR(priv, "Error Reply type 0x%08X cmd %s (0x%02X) " - "seq 0x%04X ser 0x%08X\n", - le32_to_cpu(pkt->u.err_resp.error_type), - get_cmd_string(pkt->u.err_resp.cmd_id), - pkt->u.err_resp.cmd_id, - le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num), - le32_to_cpu(pkt->u.err_resp.error_info)); -} -EXPORT_SYMBOL(iwl_rx_reply_error); - -void iwl_clear_isr_stats(struct iwl_priv *priv) -{ - memset(&priv->isr_stats, 0, sizeof(priv->isr_stats)); -} - -int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue, - const struct ieee80211_tx_queue_params *params) -{ - struct iwl_priv *priv = hw->priv; - unsigned long flags; - int q; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n"); - return -EIO; - } - - if (queue >= AC_NUM) { - IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue); - return 0; - } - - q = AC_NUM - 1 - queue; - - spin_lock_irqsave(&priv->lock, flags); - - priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min); - priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max); - priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs; - priv->qos_data.def_qos_parm.ac[q].edca_txop = - cpu_to_le16((params->txop * 32)); - - priv->qos_data.def_qos_parm.ac[q].reserved1 = 0; - priv->qos_data.qos_active = 1; - - if (priv->iw_mode == NL80211_IFTYPE_AP) - iwl_activate_qos(priv, 1); - else if (priv->assoc_id && iwl_is_associated(priv)) - iwl_activate_qos(priv, 0); - - spin_unlock_irqrestore(&priv->lock, flags); - - IWL_DEBUG_MAC80211(priv, "leave\n"); - return 0; -} -EXPORT_SYMBOL(iwl_mac_conf_tx); - -static void iwl_ht_conf(struct iwl_priv *priv, - struct ieee80211_bss_conf *bss_conf) -{ - struct iwl_ht_config *ht_conf = &priv->current_ht_config; - struct ieee80211_sta *sta; - - IWL_DEBUG_MAC80211(priv, "enter: \n"); - - if (!ht_conf->is_ht) - return; - - ht_conf->ht_protection = - bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION; - ht_conf->non_GF_STA_present = - !!(bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); - - ht_conf->single_chain_sufficient = false; - - switch (priv->iw_mode) { - case NL80211_IFTYPE_STATION: - rcu_read_lock(); - sta = ieee80211_find_sta(priv->vif, priv->bssid); - if (sta) { - struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; - int maxstreams; - - maxstreams = (ht_cap->mcs.tx_params & - IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK) - >> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT; - maxstreams += 1; - - if ((ht_cap->mcs.rx_mask[1] == 0) && - (ht_cap->mcs.rx_mask[2] == 0)) - ht_conf->single_chain_sufficient = true; - if (maxstreams <= 1) - ht_conf->single_chain_sufficient = true; - } else { - /* - * If at all, this can only happen through a race - * when the AP disconnects us while we're still - * setting up the connection, in that case mac80211 - * will soon tell us about that. - */ - ht_conf->single_chain_sufficient = true; - } - rcu_read_unlock(); - break; - case NL80211_IFTYPE_ADHOC: - ht_conf->single_chain_sufficient = true; - break; - default: - break; - } - - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -static inline void iwl_set_no_assoc(struct iwl_priv *priv) -{ - priv->assoc_id = 0; - iwl_led_disassociate(priv); - /* - * inform the ucode that there is no longer an - * association and that no more packets should be - * sent - */ - priv->staging_rxon.filter_flags &= - ~RXON_FILTER_ASSOC_MSK; - priv->staging_rxon.assoc_id = 0; - iwlcore_commit_rxon(priv); -} - -#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) -void iwl_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, - u32 changes) -{ - struct iwl_priv *priv = hw->priv; - int ret; - - IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes); - - if (!iwl_is_alive(priv)) - return; - - mutex_lock(&priv->mutex); - - if (changes & BSS_CHANGED_BEACON && - priv->iw_mode == NL80211_IFTYPE_AP) { - dev_kfree_skb(priv->ibss_beacon); - priv->ibss_beacon = ieee80211_beacon_get(hw, vif); - } - - if (changes & BSS_CHANGED_BEACON_INT) { - priv->beacon_int = bss_conf->beacon_int; - /* TODO: in AP mode, do something to make this take effect */ - } - - if (changes & BSS_CHANGED_BSSID) { - IWL_DEBUG_MAC80211(priv, "BSSID %pM\n", bss_conf->bssid); - - /* - * If there is currently a HW scan going on in the - * background then we need to cancel it else the RXON - * below/in post_associate will fail. - */ - if (iwl_scan_cancel_timeout(priv, 100)) { - IWL_WARN(priv, "Aborted scan still in progress after 100ms\n"); - IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n"); - mutex_unlock(&priv->mutex); - return; - } - - /* mac80211 only sets assoc when in STATION mode */ - if (priv->iw_mode == NL80211_IFTYPE_ADHOC || - bss_conf->assoc) { - memcpy(priv->staging_rxon.bssid_addr, - bss_conf->bssid, ETH_ALEN); - - /* currently needed in a few places */ - memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN); - } else { - priv->staging_rxon.filter_flags &= - ~RXON_FILTER_ASSOC_MSK; - } - - } - - /* - * This needs to be after setting the BSSID in case - * mac80211 decides to do both changes at once because - * it will invoke post_associate. - */ - if (priv->iw_mode == NL80211_IFTYPE_ADHOC && - changes & BSS_CHANGED_BEACON) { - struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); - - if (beacon) - iwl_mac_beacon_update(hw, beacon); - } - - if (changes & BSS_CHANGED_ERP_PREAMBLE) { - IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n", - bss_conf->use_short_preamble); - if (bss_conf->use_short_preamble) - priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; - else - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; - } - - if (changes & BSS_CHANGED_ERP_CTS_PROT) { - IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n", bss_conf->use_cts_prot); - if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ)) - priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK; - else - priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK; - } - - if (changes & BSS_CHANGED_BASIC_RATES) { - /* XXX use this information - * - * To do that, remove code from iwl_set_rate() and put something - * like this here: - * - if (A-band) - priv->staging_rxon.ofdm_basic_rates = - bss_conf->basic_rates; - else - priv->staging_rxon.ofdm_basic_rates = - bss_conf->basic_rates >> 4; - priv->staging_rxon.cck_basic_rates = - bss_conf->basic_rates & 0xF; - */ - } - - if (changes & BSS_CHANGED_HT) { - iwl_ht_conf(priv, bss_conf); - - if (priv->cfg->ops->hcmd->set_rxon_chain) - priv->cfg->ops->hcmd->set_rxon_chain(priv); - } - - if (changes & BSS_CHANGED_ASSOC) { - IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc); - if (bss_conf->assoc) { - priv->assoc_id = bss_conf->aid; - priv->beacon_int = bss_conf->beacon_int; - priv->timestamp = bss_conf->timestamp; - priv->assoc_capability = bss_conf->assoc_capability; - - iwl_led_associate(priv); - - /* - * We have just associated, don't start scan too early - * leave time for EAPOL exchange to complete. - * - * XXX: do this in mac80211 - */ - priv->next_scan_jiffies = jiffies + - IWL_DELAY_NEXT_SCAN_AFTER_ASSOC; - if (!iwl_is_rfkill(priv)) - priv->cfg->ops->lib->post_associate(priv); - } else - iwl_set_no_assoc(priv); - } - - if (changes && iwl_is_associated(priv) && priv->assoc_id) { - IWL_DEBUG_MAC80211(priv, "Changes (%#x) while associated\n", - changes); - ret = iwl_send_rxon_assoc(priv); - if (!ret) { - /* Sync active_rxon with latest change. */ - memcpy((void *)&priv->active_rxon, - &priv->staging_rxon, - sizeof(struct iwl_rxon_cmd)); - } - } - - if (changes & BSS_CHANGED_BEACON_ENABLED) { - if (vif->bss_conf.enable_beacon) { - memcpy(priv->staging_rxon.bssid_addr, - bss_conf->bssid, ETH_ALEN); - memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN); - iwlcore_config_ap(priv); - } else - iwl_set_no_assoc(priv); - } - - mutex_unlock(&priv->mutex); - - IWL_DEBUG_MAC80211(priv, "leave\n"); -} -EXPORT_SYMBOL(iwl_bss_info_changed); - -int iwl_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) -{ - struct iwl_priv *priv = hw->priv; - unsigned long flags; - __le64 timestamp; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n"); - return -EIO; - } - - if (priv->iw_mode != NL80211_IFTYPE_ADHOC) { - IWL_DEBUG_MAC80211(priv, "leave - not IBSS\n"); - return -EIO; - } - - spin_lock_irqsave(&priv->lock, flags); - - if (priv->ibss_beacon) - dev_kfree_skb(priv->ibss_beacon); - - priv->ibss_beacon = skb; - - priv->assoc_id = 0; - timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp; - priv->timestamp = le64_to_cpu(timestamp); - - IWL_DEBUG_MAC80211(priv, "leave\n"); - spin_unlock_irqrestore(&priv->lock, flags); - - iwl_reset_qos(priv); - - priv->cfg->ops->lib->post_associate(priv); - - - return 0; -} -EXPORT_SYMBOL(iwl_mac_beacon_update); - -int iwl_set_mode(struct iwl_priv *priv, int mode) -{ - if (mode == NL80211_IFTYPE_ADHOC) { - const struct iwl_channel_info *ch_info; - - ch_info = iwl_get_channel_info(priv, - priv->band, - le16_to_cpu(priv->staging_rxon.channel)); - - if (!ch_info || !is_channel_ibss(ch_info)) { - IWL_ERR(priv, "channel %d not IBSS channel\n", - le16_to_cpu(priv->staging_rxon.channel)); - return -EINVAL; - } - } - - iwl_connection_init_rx_config(priv, mode); - - if (priv->cfg->ops->hcmd->set_rxon_chain) - priv->cfg->ops->hcmd->set_rxon_chain(priv); - - memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); - - iwl_clear_stations_table(priv); - - /* dont commit rxon if rf-kill is on*/ - if (!iwl_is_ready_rf(priv)) - return -EAGAIN; - - iwlcore_commit_rxon(priv); - - return 0; -} -EXPORT_SYMBOL(iwl_set_mode); - -int iwl_mac_add_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) -{ - struct iwl_priv *priv = hw->priv; - unsigned long flags; - - IWL_DEBUG_MAC80211(priv, "enter: type %d\n", conf->type); - - if (priv->vif) { - IWL_DEBUG_MAC80211(priv, "leave - vif != NULL\n"); - return -EOPNOTSUPP; - } - - spin_lock_irqsave(&priv->lock, flags); - priv->vif = conf->vif; - priv->iw_mode = conf->type; - - spin_unlock_irqrestore(&priv->lock, flags); - - mutex_lock(&priv->mutex); - - if (conf->mac_addr) { - IWL_DEBUG_MAC80211(priv, "Set %pM\n", conf->mac_addr); - memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN); - } - - if (iwl_set_mode(priv, conf->type) == -EAGAIN) - /* we are not ready, will run again when ready */ - set_bit(STATUS_MODE_PENDING, &priv->status); - - mutex_unlock(&priv->mutex); - - IWL_DEBUG_MAC80211(priv, "leave\n"); - return 0; -} -EXPORT_SYMBOL(iwl_mac_add_interface); - -void iwl_mac_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - mutex_lock(&priv->mutex); - - if (iwl_is_ready_rf(priv)) { - iwl_scan_cancel_timeout(priv, 100); - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwlcore_commit_rxon(priv); - } - if (priv->vif == conf->vif) { - priv->vif = NULL; - memset(priv->bssid, 0, ETH_ALEN); - } - mutex_unlock(&priv->mutex); - - IWL_DEBUG_MAC80211(priv, "leave\n"); - -} -EXPORT_SYMBOL(iwl_mac_remove_interface); - -/** - * iwl_mac_config - mac80211 config callback - * - * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to - * be set inappropriately and the driver currently sets the hardware up to - * use it whenever needed. - */ -int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) -{ - struct iwl_priv *priv = hw->priv; - const struct iwl_channel_info *ch_info; - struct ieee80211_conf *conf = &hw->conf; - struct iwl_ht_config *ht_conf = &priv->current_ht_config; - unsigned long flags = 0; - int ret = 0; - u16 ch; - int scan_active = 0; - - mutex_lock(&priv->mutex); - - IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n", - conf->channel->hw_value, changed); - - if (unlikely(!priv->cfg->mod_params->disable_hw_scan && - test_bit(STATUS_SCANNING, &priv->status))) { - scan_active = 1; - IWL_DEBUG_MAC80211(priv, "leave - scanning\n"); - } - - - /* during scanning mac80211 will delay channel setting until - * scan finish with changed = 0 - */ - if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) { - if (scan_active) - goto set_ch_out; - - ch = ieee80211_frequency_to_channel(conf->channel->center_freq); - ch_info = iwl_get_channel_info(priv, conf->channel->band, ch); - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n"); - ret = -EINVAL; - goto set_ch_out; - } - - if (priv->iw_mode == NL80211_IFTYPE_ADHOC && - !is_channel_ibss(ch_info)) { - IWL_ERR(priv, "channel %d in band %d not " - "IBSS channel\n", - conf->channel->hw_value, conf->channel->band); - ret = -EINVAL; - goto set_ch_out; - } - - spin_lock_irqsave(&priv->lock, flags); - - /* Configure HT40 channels */ - ht_conf->is_ht = conf_is_ht(conf); - if (ht_conf->is_ht) { - if (conf_is_ht40_minus(conf)) { - ht_conf->extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_BELOW; - ht_conf->is_40mhz = true; - } else if (conf_is_ht40_plus(conf)) { - ht_conf->extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_ABOVE; - ht_conf->is_40mhz = true; - } else { - ht_conf->extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_NONE; - ht_conf->is_40mhz = false; - } - } else - ht_conf->is_40mhz = false; - /* Default to no protection. Protection mode will later be set - * from BSS config in iwl_ht_conf */ - ht_conf->ht_protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE; - - /* if we are switching from ht to 2.4 clear flags - * from any ht related info since 2.4 does not - * support ht */ - if ((le16_to_cpu(priv->staging_rxon.channel) != ch)) - priv->staging_rxon.flags = 0; - - iwl_set_rxon_channel(priv, conf->channel); - - iwl_set_flags_for_band(priv, conf->channel->band); - spin_unlock_irqrestore(&priv->lock, flags); - if (iwl_is_associated(priv) && - (le16_to_cpu(priv->active_rxon.channel) != ch) && - priv->cfg->ops->lib->set_channel_switch) { - iwl_set_rate(priv); - /* - * at this point, staging_rxon has the - * configuration for channel switch - */ - ret = priv->cfg->ops->lib->set_channel_switch(priv, - ch); - if (!ret) { - iwl_print_rx_config_cmd(priv); - goto out; - } - priv->switch_rxon.switch_in_progress = false; - } - set_ch_out: - /* The list of supported rates and rate mask can be different - * for each band; since the band may have changed, reset - * the rate mask to what mac80211 lists */ - iwl_set_rate(priv); - } - - if (changed & (IEEE80211_CONF_CHANGE_PS | - IEEE80211_CONF_CHANGE_IDLE)) { - ret = iwl_power_update_mode(priv, false); - if (ret) - IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n"); - } - - if (changed & IEEE80211_CONF_CHANGE_POWER) { - IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n", - priv->tx_power_user_lmt, conf->power_level); - - iwl_set_tx_power(priv, conf->power_level, false); - } - - /* call to ensure that 4965 rx_chain is set properly in monitor mode */ - if (priv->cfg->ops->hcmd->set_rxon_chain) - priv->cfg->ops->hcmd->set_rxon_chain(priv); - - if (!iwl_is_ready(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); - goto out; - } - - if (scan_active) - goto out; - - if (memcmp(&priv->active_rxon, - &priv->staging_rxon, sizeof(priv->staging_rxon))) - iwlcore_commit_rxon(priv); - else - IWL_DEBUG_INFO(priv, "Not re-sending same RXON configuration.\n"); - - -out: - IWL_DEBUG_MAC80211(priv, "leave\n"); - mutex_unlock(&priv->mutex); - return ret; -} -EXPORT_SYMBOL(iwl_mac_config); - -int iwl_mac_get_tx_stats(struct ieee80211_hw *hw, - struct ieee80211_tx_queue_stats *stats) -{ - struct iwl_priv *priv = hw->priv; - int i, avail; - struct iwl_tx_queue *txq; - struct iwl_queue *q; - unsigned long flags; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n"); - return -EIO; - } - - spin_lock_irqsave(&priv->lock, flags); - - for (i = 0; i < AC_NUM; i++) { - txq = &priv->txq[i]; - q = &txq->q; - avail = iwl_queue_space(q); - - stats[i].len = q->n_window - avail; - stats[i].limit = q->n_window - q->high_mark; - stats[i].count = q->n_window; - - } - spin_unlock_irqrestore(&priv->lock, flags); - - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return 0; -} -EXPORT_SYMBOL(iwl_mac_get_tx_stats); - -void iwl_mac_reset_tsf(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - unsigned long flags; - - mutex_lock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "enter\n"); - - spin_lock_irqsave(&priv->lock, flags); - memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_config)); - spin_unlock_irqrestore(&priv->lock, flags); - - iwl_reset_qos(priv); - - spin_lock_irqsave(&priv->lock, flags); - priv->assoc_id = 0; - priv->assoc_capability = 0; - priv->assoc_station_added = 0; - - /* new association get rid of ibss beacon skb */ - if (priv->ibss_beacon) - dev_kfree_skb(priv->ibss_beacon); - - priv->ibss_beacon = NULL; - - priv->beacon_int = priv->vif->bss_conf.beacon_int; - priv->timestamp = 0; - if ((priv->iw_mode == NL80211_IFTYPE_STATION)) - priv->beacon_int = 0; - - spin_unlock_irqrestore(&priv->lock, flags); - - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); - mutex_unlock(&priv->mutex); - return; - } - - /* we are restarting association process - * clear RXON_FILTER_ASSOC_MSK bit - */ - if (priv->iw_mode != NL80211_IFTYPE_AP) { - iwl_scan_cancel_timeout(priv, 100); - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwlcore_commit_rxon(priv); - } - - if (priv->iw_mode != NL80211_IFTYPE_ADHOC) { - IWL_DEBUG_MAC80211(priv, "leave - not in IBSS\n"); - mutex_unlock(&priv->mutex); - return; - } - - iwl_set_rate(priv); - - mutex_unlock(&priv->mutex); - - IWL_DEBUG_MAC80211(priv, "leave\n"); -} -EXPORT_SYMBOL(iwl_mac_reset_tsf); - -int iwl_alloc_txq_mem(struct iwl_priv *priv) -{ - if (!priv->txq) - priv->txq = kzalloc( - sizeof(struct iwl_tx_queue) * priv->cfg->num_of_queues, - GFP_KERNEL); - if (!priv->txq) { - IWL_ERR(priv, "Not enough memory for txq \n"); - return -ENOMEM; - } - return 0; -} -EXPORT_SYMBOL(iwl_alloc_txq_mem); - -void iwl_free_txq_mem(struct iwl_priv *priv) -{ - kfree(priv->txq); - priv->txq = NULL; -} -EXPORT_SYMBOL(iwl_free_txq_mem); - -int iwl_send_wimax_coex(struct iwl_priv *priv) -{ - struct iwl_wimax_coex_cmd uninitialized_var(coex_cmd); - - if (priv->cfg->support_wimax_coexist) { - /* UnMask wake up src at associated sleep */ - coex_cmd.flags |= COEX_FLAGS_ASSOC_WA_UNMASK_MSK; - - /* UnMask wake up src at unassociated sleep */ - coex_cmd.flags |= COEX_FLAGS_UNASSOC_WA_UNMASK_MSK; - memcpy(coex_cmd.sta_prio, cu_priorities, - sizeof(struct iwl_wimax_coex_event_entry) * - COEX_NUM_OF_EVENTS); - - /* enabling the coexistence feature */ - coex_cmd.flags |= COEX_FLAGS_COEX_ENABLE_MSK; - - /* enabling the priorities tables */ - coex_cmd.flags |= COEX_FLAGS_STA_TABLE_VALID_MSK; - } else { - /* coexistence is disabled */ - memset(&coex_cmd, 0, sizeof(coex_cmd)); - } - return iwl_send_cmd_pdu(priv, COEX_PRIORITY_TABLE_CMD, - sizeof(coex_cmd), &coex_cmd); -} -EXPORT_SYMBOL(iwl_send_wimax_coex); - -#ifdef CONFIG_IWLWIFI_DEBUGFS - -#define IWL_TRAFFIC_DUMP_SIZE (IWL_TRAFFIC_ENTRY_SIZE * IWL_TRAFFIC_ENTRIES) - -void iwl_reset_traffic_log(struct iwl_priv *priv) -{ - priv->tx_traffic_idx = 0; - priv->rx_traffic_idx = 0; - if (priv->tx_traffic) - memset(priv->tx_traffic, 0, IWL_TRAFFIC_DUMP_SIZE); - if (priv->rx_traffic) - memset(priv->rx_traffic, 0, IWL_TRAFFIC_DUMP_SIZE); -} - -int iwl_alloc_traffic_mem(struct iwl_priv *priv) -{ - u32 traffic_size = IWL_TRAFFIC_DUMP_SIZE; - - if (iwl_debug_level & IWL_DL_TX) { - if (!priv->tx_traffic) { - priv->tx_traffic = - kzalloc(traffic_size, GFP_KERNEL); - if (!priv->tx_traffic) - return -ENOMEM; - } - } - if (iwl_debug_level & IWL_DL_RX) { - if (!priv->rx_traffic) { - priv->rx_traffic = - kzalloc(traffic_size, GFP_KERNEL); - if (!priv->rx_traffic) - return -ENOMEM; - } - } - iwl_reset_traffic_log(priv); - return 0; -} -EXPORT_SYMBOL(iwl_alloc_traffic_mem); - -void iwl_free_traffic_mem(struct iwl_priv *priv) -{ - kfree(priv->tx_traffic); - priv->tx_traffic = NULL; - - kfree(priv->rx_traffic); - priv->rx_traffic = NULL; -} -EXPORT_SYMBOL(iwl_free_traffic_mem); - -void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv, - u16 length, struct ieee80211_hdr *header) -{ - __le16 fc; - u16 len; - - if (likely(!(iwl_debug_level & IWL_DL_TX))) - return; - - if (!priv->tx_traffic) - return; - - fc = header->frame_control; - if (ieee80211_is_data(fc)) { - len = (length > IWL_TRAFFIC_ENTRY_SIZE) - ? IWL_TRAFFIC_ENTRY_SIZE : length; - memcpy((priv->tx_traffic + - (priv->tx_traffic_idx * IWL_TRAFFIC_ENTRY_SIZE)), - header, len); - priv->tx_traffic_idx = - (priv->tx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES; - } -} -EXPORT_SYMBOL(iwl_dbg_log_tx_data_frame); - -void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv, - u16 length, struct ieee80211_hdr *header) -{ - __le16 fc; - u16 len; - - if (likely(!(iwl_debug_level & IWL_DL_RX))) - return; - - if (!priv->rx_traffic) - return; - - fc = header->frame_control; - if (ieee80211_is_data(fc)) { - len = (length > IWL_TRAFFIC_ENTRY_SIZE) - ? IWL_TRAFFIC_ENTRY_SIZE : length; - memcpy((priv->rx_traffic + - (priv->rx_traffic_idx * IWL_TRAFFIC_ENTRY_SIZE)), - header, len); - priv->rx_traffic_idx = - (priv->rx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES; - } -} -EXPORT_SYMBOL(iwl_dbg_log_rx_data_frame); - -const char *get_mgmt_string(int cmd) -{ - switch (cmd) { - IWL_CMD(MANAGEMENT_ASSOC_REQ); - IWL_CMD(MANAGEMENT_ASSOC_RESP); - IWL_CMD(MANAGEMENT_REASSOC_REQ); - IWL_CMD(MANAGEMENT_REASSOC_RESP); - IWL_CMD(MANAGEMENT_PROBE_REQ); - IWL_CMD(MANAGEMENT_PROBE_RESP); - IWL_CMD(MANAGEMENT_BEACON); - IWL_CMD(MANAGEMENT_ATIM); - IWL_CMD(MANAGEMENT_DISASSOC); - IWL_CMD(MANAGEMENT_AUTH); - IWL_CMD(MANAGEMENT_DEAUTH); - IWL_CMD(MANAGEMENT_ACTION); - default: - return "UNKNOWN"; - - } -} - -const char *get_ctrl_string(int cmd) -{ - switch (cmd) { - IWL_CMD(CONTROL_BACK_REQ); - IWL_CMD(CONTROL_BACK); - IWL_CMD(CONTROL_PSPOLL); - IWL_CMD(CONTROL_RTS); - IWL_CMD(CONTROL_CTS); - IWL_CMD(CONTROL_ACK); - IWL_CMD(CONTROL_CFEND); - IWL_CMD(CONTROL_CFENDACK); - default: - return "UNKNOWN"; - - } -} - -void iwl_clear_traffic_stats(struct iwl_priv *priv) -{ - memset(&priv->tx_stats, 0, sizeof(struct traffic_stats)); - memset(&priv->rx_stats, 0, sizeof(struct traffic_stats)); - priv->led_tpt = 0; -} - -/* - * if CONFIG_IWLWIFI_DEBUGFS defined, iwl_update_stats function will - * record all the MGMT, CTRL and DATA pkt for both TX and Rx pass. - * Use debugFs to display the rx/rx_statistics - * if CONFIG_IWLWIFI_DEBUGFS not being defined, then no MGMT and CTRL - * information will be recorded, but DATA pkt still will be recorded - * for the reason of iwl_led.c need to control the led blinking based on - * number of tx and rx data. - * - */ -void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc, u16 len) -{ - struct traffic_stats *stats; - - if (is_tx) - stats = &priv->tx_stats; - else - stats = &priv->rx_stats; - - if (ieee80211_is_mgmt(fc)) { - switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) { - case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ): - stats->mgmt[MANAGEMENT_ASSOC_REQ]++; - break; - case cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP): - stats->mgmt[MANAGEMENT_ASSOC_RESP]++; - break; - case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ): - stats->mgmt[MANAGEMENT_REASSOC_REQ]++; - break; - case cpu_to_le16(IEEE80211_STYPE_REASSOC_RESP): - stats->mgmt[MANAGEMENT_REASSOC_RESP]++; - break; - case cpu_to_le16(IEEE80211_STYPE_PROBE_REQ): - stats->mgmt[MANAGEMENT_PROBE_REQ]++; - break; - case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP): - stats->mgmt[MANAGEMENT_PROBE_RESP]++; - break; - case cpu_to_le16(IEEE80211_STYPE_BEACON): - stats->mgmt[MANAGEMENT_BEACON]++; - break; - case cpu_to_le16(IEEE80211_STYPE_ATIM): - stats->mgmt[MANAGEMENT_ATIM]++; - break; - case cpu_to_le16(IEEE80211_STYPE_DISASSOC): - stats->mgmt[MANAGEMENT_DISASSOC]++; - break; - case cpu_to_le16(IEEE80211_STYPE_AUTH): - stats->mgmt[MANAGEMENT_AUTH]++; - break; - case cpu_to_le16(IEEE80211_STYPE_DEAUTH): - stats->mgmt[MANAGEMENT_DEAUTH]++; - break; - case cpu_to_le16(IEEE80211_STYPE_ACTION): - stats->mgmt[MANAGEMENT_ACTION]++; - break; - } - } else if (ieee80211_is_ctl(fc)) { - switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) { - case cpu_to_le16(IEEE80211_STYPE_BACK_REQ): - stats->ctrl[CONTROL_BACK_REQ]++; - break; - case cpu_to_le16(IEEE80211_STYPE_BACK): - stats->ctrl[CONTROL_BACK]++; - break; - case cpu_to_le16(IEEE80211_STYPE_PSPOLL): - stats->ctrl[CONTROL_PSPOLL]++; - break; - case cpu_to_le16(IEEE80211_STYPE_RTS): - stats->ctrl[CONTROL_RTS]++; - break; - case cpu_to_le16(IEEE80211_STYPE_CTS): - stats->ctrl[CONTROL_CTS]++; - break; - case cpu_to_le16(IEEE80211_STYPE_ACK): - stats->ctrl[CONTROL_ACK]++; - break; - case cpu_to_le16(IEEE80211_STYPE_CFEND): - stats->ctrl[CONTROL_CFEND]++; - break; - case cpu_to_le16(IEEE80211_STYPE_CFENDACK): - stats->ctrl[CONTROL_CFENDACK]++; - break; - } - } else { - /* data */ - stats->data_cnt++; - stats->data_bytes += len; - } - iwl_leds_background(priv); -} -EXPORT_SYMBOL(iwl_update_stats); -#endif - -#ifdef CONFIG_PM - -int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct iwl_priv *priv = pci_get_drvdata(pdev); - - /* - * This function is called when system goes into suspend state - * mac80211 will call iwl_mac_stop() from the mac80211 suspend function - * first but since iwl_mac_stop() has no knowledge of who the caller is, - * it will not call apm_ops.stop() to stop the DMA operation. - * Calling apm_ops.stop here to make sure we stop the DMA. - */ - priv->cfg->ops->lib->apm_ops.stop(priv); - - pci_save_state(pdev); - pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D3hot); - - return 0; -} -EXPORT_SYMBOL(iwl_pci_suspend); - -int iwl_pci_resume(struct pci_dev *pdev) -{ - struct iwl_priv *priv = pci_get_drvdata(pdev); - int ret; - - pci_set_power_state(pdev, PCI_D0); - ret = pci_enable_device(pdev); - if (ret) - return ret; - pci_restore_state(pdev); - iwl_enable_interrupts(priv); - - return 0; -} -EXPORT_SYMBOL(iwl_pci_resume); - -#endif /* CONFIG_PM */ |