diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-config.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-config.h | 156 |
1 files changed, 111 insertions, 45 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h index 864219d2136..b7047905f41 100644 --- a/drivers/net/wireless/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/iwlwifi/iwl-config.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -22,7 +22,7 @@ * USA * * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. + * in the file called COPYING. * * Contact Information: * Intel Linux Wireless <ilw@linux.intel.com> @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -83,6 +83,8 @@ enum iwl_device_family { IWL_DEVICE_FAMILY_6030, IWL_DEVICE_FAMILY_6050, IWL_DEVICE_FAMILY_6150, + IWL_DEVICE_FAMILY_7000, + IWL_DEVICE_FAMILY_8000, }; /* @@ -128,6 +130,12 @@ enum iwl_led_mode { #define ANT_BC (ANT_B | ANT_C) #define ANT_ABC (ANT_A | ANT_B | ANT_C) +static inline u8 num_of_ant(u8 mask) +{ + return !!((mask) & ANT_A) + + !!((mask) & ANT_B) + + !!((mask) & ANT_C); +} /* * @max_ll_items: max number of OTP blocks @@ -135,17 +143,12 @@ enum iwl_led_mode { * @led_compensation: compensate on the led on/off time per HW according * to the deviation to achieve the desired led frequency. * The detail algorithm is described in iwl-led.c - * @chain_noise_num_beacons: number of beacons used to compute chain noise - * @adv_thermal_throttle: support advance thermal throttle - * @support_ct_kill_exit: support ct kill exit condition - * @plcp_delta_threshold: plcp error rate threshold used to trigger - * radio tuning when there is a high receiving plcp error rate - * @chain_noise_scale: default chain noise scale used for gain computation * @wd_timeout: TX queues watchdog timeout * @max_event_log_size: size of event log buffer size for ucode event logging * @shadow_reg_enable: HW shadow register support - * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up - * @no_idle_support: do not support idle mode + * @apmg_wake_up_wa: should the MAC access REQ be asserted when a command + * is in flight. This is due to a HW bug in 7260, 3160 and 7265. + * @scd_chain_ext_wa: should the chain extension feature in SCD be disabled. */ struct iwl_base_params { int eeprom_size; @@ -156,40 +159,23 @@ struct iwl_base_params { const u16 max_ll_items; const bool shadow_ram_support; u16 led_compensation; - bool adv_thermal_throttle; - bool support_ct_kill_exit; - u8 plcp_delta_threshold; - s32 chain_noise_scale; unsigned int wd_timeout; u32 max_event_log_size; const bool shadow_reg_enable; - const bool hd_v2; - const bool no_idle_support; -}; - -/* - * @advanced_bt_coexist: support advanced bt coexist - * @bt_init_traffic_load: specify initial bt traffic load - * @bt_prio_boost: default bt priority boost value - * @agg_time_limit: maximum number of uSec in aggregation - * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode - */ -struct iwl_bt_params { - bool advanced_bt_coexist; - u8 bt_init_traffic_load; - u32 bt_prio_boost; - u16 agg_time_limit; - bool bt_sco_disable; - bool bt_session_2; + const bool pcie_l1_allowed; + const bool apmg_wake_up_wa; + const bool scd_chain_ext_wa; }; /* + * @stbc: support Tx STBC and 1*SS Rx STBC * @use_rts_for_aggregation: use rts/cts protection for HT traffic * @ht40_bands: bitmap of bands (using %IEEE80211_BAND_*) that support HT40 */ struct iwl_ht_params { enum ieee80211_smps_mode smps_mode; const bool ht_greenfield_support; /* if used set to true */ + const bool stbc; bool use_rts_for_aggregation; u8 ht40_bands; }; @@ -207,11 +193,25 @@ struct iwl_ht_params { #define EEPROM_6000_REG_BAND_24_HT40_CHANNELS 0x80 #define EEPROM_REGULATORY_BAND_NO_HT40 0 +/* lower blocks contain EEPROM image and calibration data */ +#define OTP_LOW_IMAGE_SIZE (2 * 512 * sizeof(u16)) /* 2 KB */ +#define OTP_LOW_IMAGE_SIZE_FAMILY_7000 (16 * 512 * sizeof(u16)) /* 16 KB */ +#define OTP_LOW_IMAGE_SIZE_FAMILY_8000 (32 * 512 * sizeof(u16)) /* 32 KB */ + struct iwl_eeprom_params { const u8 regulatory_bands[7]; bool enhanced_txpower; }; +/* Tx-backoff power threshold + * @pwr: The power limit in mw + * @backoff: The tx-backoff in uSec + */ +struct iwl_pwr_tx_backoff { + u32 pwr; + u32 backoff; +}; + /** * struct iwl_cfg * @name: Offical name of the device @@ -230,16 +230,16 @@ struct iwl_eeprom_params { * @nvm_calib_ver: NVM calibration version * @lib: pointer to the lib ops * @base_params: pointer to basic parameters - * @ht_params: point to ht patameters - * @bt_params: pointer to bt parameters - * @need_temp_offset_calib: need to perform temperature offset calibration - * @no_xtal_calib: some devices do not need crystal calibration data, - * don't send it to those + * @ht_params: point to ht parameters * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off) - * @adv_pm: advance power management * @rx_with_siso_diversity: 1x1 device with rx antenna diversity * @internal_wimax_coex: internal wifi/wimax combo device - * @temp_offset_v2: support v2 of temperature offset calibration + * @high_temp: Is this NIC is designated to be in high temperature. + * @host_interrupt_operation_mode: device needs host interrupt operation + * mode set + * @d0i3: device uses d0i3 instead of d3 + * @nvm_hw_section_num: the ID of the HW NVM section + * @pwr_tx_backoffs: translation table between power limits and backoffs * * We enable the driver to be backward compatible wrt. hardware features. * API differences in uCode shouldn't be handled here but through TLVs @@ -257,21 +257,87 @@ struct iwl_cfg { const u32 max_inst_size; u8 valid_tx_ant; u8 valid_rx_ant; + bool bt_shared_single_ant; u16 nvm_ver; u16 nvm_calib_ver; /* params not likely to change within a device family */ const struct iwl_base_params *base_params; /* params likely to change within a device family */ const struct iwl_ht_params *ht_params; - const struct iwl_bt_params *bt_params; const struct iwl_eeprom_params *eeprom_params; - const bool need_temp_offset_calib; /* if used set to true */ - const bool no_xtal_calib; enum iwl_led_mode led_mode; - const bool adv_pm; const bool rx_with_siso_diversity; const bool internal_wimax_coex; - const bool temp_offset_v2; + const bool host_interrupt_operation_mode; + bool high_temp; + bool d0i3; + u8 nvm_hw_section_num; + bool lp_xtal_workaround; + const struct iwl_pwr_tx_backoff *pwr_tx_backoffs; + bool no_power_up_nic_in_init; + const char *default_nvm_file; }; +/* + * This list declares the config structures for all devices. + */ +#if IS_ENABLED(CONFIG_IWLDVM) +extern const struct iwl_cfg iwl5300_agn_cfg; +extern const struct iwl_cfg iwl5100_agn_cfg; +extern const struct iwl_cfg iwl5350_agn_cfg; +extern const struct iwl_cfg iwl5100_bgn_cfg; +extern const struct iwl_cfg iwl5100_abg_cfg; +extern const struct iwl_cfg iwl5150_agn_cfg; +extern const struct iwl_cfg iwl5150_abg_cfg; +extern const struct iwl_cfg iwl6005_2agn_cfg; +extern const struct iwl_cfg iwl6005_2abg_cfg; +extern const struct iwl_cfg iwl6005_2bg_cfg; +extern const struct iwl_cfg iwl6005_2agn_sff_cfg; +extern const struct iwl_cfg iwl6005_2agn_d_cfg; +extern const struct iwl_cfg iwl6005_2agn_mow1_cfg; +extern const struct iwl_cfg iwl6005_2agn_mow2_cfg; +extern const struct iwl_cfg iwl1030_bgn_cfg; +extern const struct iwl_cfg iwl1030_bg_cfg; +extern const struct iwl_cfg iwl6030_2agn_cfg; +extern const struct iwl_cfg iwl6030_2abg_cfg; +extern const struct iwl_cfg iwl6030_2bgn_cfg; +extern const struct iwl_cfg iwl6030_2bg_cfg; +extern const struct iwl_cfg iwl6000i_2agn_cfg; +extern const struct iwl_cfg iwl6000i_2abg_cfg; +extern const struct iwl_cfg iwl6000i_2bg_cfg; +extern const struct iwl_cfg iwl6000_3agn_cfg; +extern const struct iwl_cfg iwl6050_2agn_cfg; +extern const struct iwl_cfg iwl6050_2abg_cfg; +extern const struct iwl_cfg iwl6150_bgn_cfg; +extern const struct iwl_cfg iwl6150_bg_cfg; +extern const struct iwl_cfg iwl1000_bgn_cfg; +extern const struct iwl_cfg iwl1000_bg_cfg; +extern const struct iwl_cfg iwl100_bgn_cfg; +extern const struct iwl_cfg iwl100_bg_cfg; +extern const struct iwl_cfg iwl130_bgn_cfg; +extern const struct iwl_cfg iwl130_bg_cfg; +extern const struct iwl_cfg iwl2000_2bgn_cfg; +extern const struct iwl_cfg iwl2000_2bgn_d_cfg; +extern const struct iwl_cfg iwl2030_2bgn_cfg; +extern const struct iwl_cfg iwl6035_2agn_cfg; +extern const struct iwl_cfg iwl6035_2agn_sff_cfg; +extern const struct iwl_cfg iwl105_bgn_cfg; +extern const struct iwl_cfg iwl105_bgn_d_cfg; +extern const struct iwl_cfg iwl135_bgn_cfg; +#endif /* CONFIG_IWLDVM */ +#if IS_ENABLED(CONFIG_IWLMVM) +extern const struct iwl_cfg iwl7260_2ac_cfg; +extern const struct iwl_cfg iwl7260_2ac_cfg_high_temp; +extern const struct iwl_cfg iwl7260_2n_cfg; +extern const struct iwl_cfg iwl7260_n_cfg; +extern const struct iwl_cfg iwl3160_2ac_cfg; +extern const struct iwl_cfg iwl3160_2n_cfg; +extern const struct iwl_cfg iwl3160_n_cfg; +extern const struct iwl_cfg iwl7265_2ac_cfg; +extern const struct iwl_cfg iwl7265_2n_cfg; +extern const struct iwl_cfg iwl7265_n_cfg; +extern const struct iwl_cfg iwl8260_2ac_cfg; +extern const struct iwl_cfg iwl8260_n_cfg; +#endif /* CONFIG_IWLMVM */ + #endif /* __IWL_CONFIG_H__ */ |