diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-agn.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-agn.c | 4594 |
1 files changed, 0 insertions, 4594 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c deleted file mode 100644 index c1cfd9952e5..00000000000 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ /dev/null @@ -1,4594 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/pci-aspm.h> -#include <linux/slab.h> -#include <linux/dma-mapping.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/wireless.h> -#include <linux/firmware.h> -#include <linux/etherdevice.h> -#include <linux/if_arp.h> - -#include <net/mac80211.h> - -#include <asm/div64.h> - -#define DRV_NAME "iwlagn" - -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-helpers.h" -#include "iwl-sta.h" -#include "iwl-agn-calib.h" -#include "iwl-agn.h" - - -/****************************************************************************** - * - * module boiler plate - * - ******************************************************************************/ - -/* - * module name, copyright, version, etc. - */ -#define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux" - -#ifdef CONFIG_IWLWIFI_DEBUG -#define VD "d" -#else -#define VD -#endif - -#define DRV_VERSION IWLWIFI_VERSION VD - - -MODULE_DESCRIPTION(DRV_DESCRIPTION); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("iwl4965"); - -static int iwlagn_ant_coupling; -static bool iwlagn_bt_ch_announce = 1; - -void iwl_update_chain_flags(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx; - - if (priv->cfg->ops->hcmd->set_rxon_chain) { - for_each_context(priv, ctx) { - priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx); - if (ctx->active.rx_chain != ctx->staging.rx_chain) - iwlcore_commit_rxon(priv, ctx); - } - } -} - -static void iwl_clear_free_frames(struct iwl_priv *priv) -{ - struct list_head *element; - - IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n", - priv->frames_count); - - while (!list_empty(&priv->free_frames)) { - element = priv->free_frames.next; - list_del(element); - kfree(list_entry(element, struct iwl_frame, list)); - priv->frames_count--; - } - - if (priv->frames_count) { - IWL_WARN(priv, "%d frames still in use. Did we lose one?\n", - priv->frames_count); - priv->frames_count = 0; - } -} - -static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv) -{ - struct iwl_frame *frame; - struct list_head *element; - if (list_empty(&priv->free_frames)) { - frame = kzalloc(sizeof(*frame), GFP_KERNEL); - if (!frame) { - IWL_ERR(priv, "Could not allocate frame!\n"); - return NULL; - } - - priv->frames_count++; - return frame; - } - - element = priv->free_frames.next; - list_del(element); - return list_entry(element, struct iwl_frame, list); -} - -static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame) -{ - memset(frame, 0, sizeof(*frame)); - list_add(&frame->list, &priv->free_frames); -} - -static u32 iwl_fill_beacon_frame(struct iwl_priv *priv, - struct ieee80211_hdr *hdr, - int left) -{ - lockdep_assert_held(&priv->mutex); - - if (!priv->beacon_skb) - return 0; - - if (priv->beacon_skb->len > left) - return 0; - - memcpy(hdr, priv->beacon_skb->data, priv->beacon_skb->len); - - return priv->beacon_skb->len; -} - -/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */ -static void iwl_set_beacon_tim(struct iwl_priv *priv, - struct iwl_tx_beacon_cmd *tx_beacon_cmd, - u8 *beacon, u32 frame_size) -{ - u16 tim_idx; - struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon; - - /* - * The index is relative to frame start but we start looking at the - * variable-length part of the beacon. - */ - tim_idx = mgmt->u.beacon.variable - beacon; - - /* Parse variable-length elements of beacon to find WLAN_EID_TIM */ - while ((tim_idx < (frame_size - 2)) && - (beacon[tim_idx] != WLAN_EID_TIM)) - tim_idx += beacon[tim_idx+1] + 2; - - /* If TIM field was found, set variables */ - if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) { - tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx); - tx_beacon_cmd->tim_size = beacon[tim_idx+1]; - } else - IWL_WARN(priv, "Unable to find TIM Element in beacon\n"); -} - -static unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv, - struct iwl_frame *frame) -{ - struct iwl_tx_beacon_cmd *tx_beacon_cmd; - u32 frame_size; - u32 rate_flags; - u32 rate; - /* - * We have to set up the TX command, the TX Beacon command, and the - * beacon contents. - */ - - lockdep_assert_held(&priv->mutex); - - if (!priv->beacon_ctx) { - IWL_ERR(priv, "trying to build beacon w/o beacon context!\n"); - return 0; - } - - /* Initialize memory */ - tx_beacon_cmd = &frame->u.beacon; - memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); - - /* Set up TX beacon contents */ - frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame, - sizeof(frame->u) - sizeof(*tx_beacon_cmd)); - if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE)) - return 0; - if (!frame_size) - return 0; - - /* Set up TX command fields */ - tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); - tx_beacon_cmd->tx.sta_id = priv->beacon_ctx->bcast_sta_id; - tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK | - TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK; - - /* Set up TX beacon command fields */ - iwl_set_beacon_tim(priv, tx_beacon_cmd, (u8 *)tx_beacon_cmd->frame, - frame_size); - - /* Set up packet rate and flags */ - rate = iwl_rate_get_lowest_plcp(priv, priv->beacon_ctx); - priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant, - priv->hw_params.valid_tx_ant); - rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant); - if ((rate >= IWL_FIRST_CCK_RATE) && (rate <= IWL_LAST_CCK_RATE)) - rate_flags |= RATE_MCS_CCK_MSK; - tx_beacon_cmd->tx.rate_n_flags = iwl_hw_set_rate_n_flags(rate, - rate_flags); - - return sizeof(*tx_beacon_cmd) + frame_size; -} - -int iwlagn_send_beacon_cmd(struct iwl_priv *priv) -{ - struct iwl_frame *frame; - unsigned int frame_size; - int rc; - - frame = iwl_get_free_frame(priv); - if (!frame) { - IWL_ERR(priv, "Could not obtain free frame buffer for beacon " - "command.\n"); - return -ENOMEM; - } - - frame_size = iwl_hw_get_beacon_cmd(priv, frame); - if (!frame_size) { - IWL_ERR(priv, "Error configuring the beacon command\n"); - iwl_free_frame(priv, frame); - return -EINVAL; - } - - rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size, - &frame->u.cmd[0]); - - iwl_free_frame(priv, frame); - - return rc; -} - -static inline dma_addr_t iwl_tfd_tb_get_addr(struct iwl_tfd *tfd, u8 idx) -{ - struct iwl_tfd_tb *tb = &tfd->tbs[idx]; - - dma_addr_t addr = get_unaligned_le32(&tb->lo); - if (sizeof(dma_addr_t) > sizeof(u32)) - addr |= - ((dma_addr_t)(le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << 16; - - return addr; -} - -static inline u16 iwl_tfd_tb_get_len(struct iwl_tfd *tfd, u8 idx) -{ - struct iwl_tfd_tb *tb = &tfd->tbs[idx]; - - return le16_to_cpu(tb->hi_n_len) >> 4; -} - -static inline void iwl_tfd_set_tb(struct iwl_tfd *tfd, u8 idx, - dma_addr_t addr, u16 len) -{ - struct iwl_tfd_tb *tb = &tfd->tbs[idx]; - u16 hi_n_len = len << 4; - - put_unaligned_le32(addr, &tb->lo); - if (sizeof(dma_addr_t) > sizeof(u32)) - hi_n_len |= ((addr >> 16) >> 16) & 0xF; - - tb->hi_n_len = cpu_to_le16(hi_n_len); - - tfd->num_tbs = idx + 1; -} - -static inline u8 iwl_tfd_get_num_tbs(struct iwl_tfd *tfd) -{ - return tfd->num_tbs & 0x1f; -} - -/** - * iwl_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr] - * @priv - driver private data - * @txq - tx queue - * - * Does NOT advance any TFD circular buffer read/write indexes - * Does NOT free the TFD itself (which is within circular buffer) - */ -void iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) -{ - struct iwl_tfd *tfd_tmp = (struct iwl_tfd *)txq->tfds; - struct iwl_tfd *tfd; - struct pci_dev *dev = priv->pci_dev; - int index = txq->q.read_ptr; - int i; - int num_tbs; - - tfd = &tfd_tmp[index]; - - /* Sanity check on number of chunks */ - num_tbs = iwl_tfd_get_num_tbs(tfd); - - if (num_tbs >= IWL_NUM_OF_TBS) { - IWL_ERR(priv, "Too many chunks: %i\n", num_tbs); - /* @todo issue fatal error, it is quite serious situation */ - return; - } - - /* Unmap tx_cmd */ - if (num_tbs) - pci_unmap_single(dev, - dma_unmap_addr(&txq->meta[index], mapping), - dma_unmap_len(&txq->meta[index], len), - PCI_DMA_BIDIRECTIONAL); - - /* Unmap chunks, if any. */ - for (i = 1; i < num_tbs; i++) - pci_unmap_single(dev, iwl_tfd_tb_get_addr(tfd, i), - iwl_tfd_tb_get_len(tfd, i), PCI_DMA_TODEVICE); - - /* free SKB */ - if (txq->txb) { - struct sk_buff *skb; - - skb = txq->txb[txq->q.read_ptr].skb; - - /* can be called from irqs-disabled context */ - if (skb) { - dev_kfree_skb_any(skb); - txq->txb[txq->q.read_ptr].skb = NULL; - } - } -} - -int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, - struct iwl_tx_queue *txq, - dma_addr_t addr, u16 len, - u8 reset, u8 pad) -{ - struct iwl_queue *q; - struct iwl_tfd *tfd, *tfd_tmp; - u32 num_tbs; - - q = &txq->q; - tfd_tmp = (struct iwl_tfd *)txq->tfds; - tfd = &tfd_tmp[q->write_ptr]; - - if (reset) - memset(tfd, 0, sizeof(*tfd)); - - num_tbs = iwl_tfd_get_num_tbs(tfd); - - /* Each TFD can point to a maximum 20 Tx buffers */ - if (num_tbs >= IWL_NUM_OF_TBS) { - IWL_ERR(priv, "Error can not send more than %d chunks\n", - IWL_NUM_OF_TBS); - return -EINVAL; - } - - BUG_ON(addr & ~DMA_BIT_MASK(36)); - if (unlikely(addr & ~IWL_TX_DMA_MASK)) - IWL_ERR(priv, "Unaligned address = %llx\n", - (unsigned long long)addr); - - iwl_tfd_set_tb(tfd, num_tbs, addr, len); - - return 0; -} - -/* - * Tell nic where to find circular buffer of Tx Frame Descriptors for - * given Tx queue, and enable the DMA channel used for that queue. - * - * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA - * channels supported in hardware. - */ -int iwl_hw_tx_queue_init(struct iwl_priv *priv, - struct iwl_tx_queue *txq) -{ - int txq_id = txq->q.id; - - /* Circular buffer (TFD queue in DRAM) physical base address */ - iwl_write_direct32(priv, FH_MEM_CBBC_QUEUE(txq_id), - txq->q.dma_addr >> 8); - - return 0; -} - -/****************************************************************************** - * - * Generic RX handler implementations - * - ******************************************************************************/ -static void iwl_rx_reply_alive(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_alive_resp *palive; - struct delayed_work *pwork; - - palive = &pkt->u.alive_frame; - - IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision " - "0x%01X 0x%01X\n", - palive->is_valid, palive->ver_type, - palive->ver_subtype); - - if (palive->ver_subtype == INITIALIZE_SUBTYPE) { - IWL_DEBUG_INFO(priv, "Initialization Alive received.\n"); - memcpy(&priv->card_alive_init, - &pkt->u.alive_frame, - sizeof(struct iwl_init_alive_resp)); - pwork = &priv->init_alive_start; - } else { - IWL_DEBUG_INFO(priv, "Runtime Alive received.\n"); - memcpy(&priv->card_alive, &pkt->u.alive_frame, - sizeof(struct iwl_alive_resp)); - pwork = &priv->alive_start; - } - - /* We delay the ALIVE response by 5ms to - * give the HW RF Kill time to activate... */ - if (palive->is_valid == UCODE_VALID_OK) - queue_delayed_work(priv->workqueue, pwork, - msecs_to_jiffies(5)); - else - IWL_WARN(priv, "uCode did not respond OK.\n"); -} - -static void iwl_bg_beacon_update(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, beacon_update); - struct sk_buff *beacon; - - mutex_lock(&priv->mutex); - if (!priv->beacon_ctx) { - IWL_ERR(priv, "updating beacon w/o beacon context!\n"); - goto out; - } - - if (priv->beacon_ctx->vif->type != NL80211_IFTYPE_AP) { - /* - * The ucode will send beacon notifications even in - * IBSS mode, but we don't want to process them. But - * we need to defer the type check to here due to - * requiring locking around the beacon_ctx access. - */ - goto out; - } - - /* Pull updated AP beacon from mac80211. will fail if not in AP mode */ - beacon = ieee80211_beacon_get(priv->hw, priv->beacon_ctx->vif); - if (!beacon) { - IWL_ERR(priv, "update beacon failed -- keeping old\n"); - goto out; - } - - /* new beacon skb is allocated every time; dispose previous.*/ - dev_kfree_skb(priv->beacon_skb); - - priv->beacon_skb = beacon; - - iwlagn_send_beacon_cmd(priv); - out: - mutex_unlock(&priv->mutex); -} - -static void iwl_bg_bt_runtime_config(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, bt_runtime_config); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - /* dont send host command if rf-kill is on */ - if (!iwl_is_ready_rf(priv)) - return; - priv->cfg->ops->hcmd->send_bt_config(priv); -} - -static void iwl_bg_bt_full_concurrency(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, bt_full_concurrency); - struct iwl_rxon_context *ctx; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - /* dont send host command if rf-kill is on */ - if (!iwl_is_ready_rf(priv)) - return; - - IWL_DEBUG_INFO(priv, "BT coex in %s mode\n", - priv->bt_full_concurrent ? - "full concurrency" : "3-wire"); - - /* - * LQ & RXON updated cmds must be sent before BT Config cmd - * to avoid 3-wire collisions - */ - mutex_lock(&priv->mutex); - for_each_context(priv, ctx) { - if (priv->cfg->ops->hcmd->set_rxon_chain) - priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx); - iwlcore_commit_rxon(priv, ctx); - } - mutex_unlock(&priv->mutex); - - priv->cfg->ops->hcmd->send_bt_config(priv); -} - -/** - * iwl_bg_statistics_periodic - Timer callback to queue statistics - * - * This callback is provided in order to send a statistics request. - * - * This timer function is continually reset to execute within - * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION - * was received. We need to ensure we receive the statistics in order - * to update the temperature used for calibrating the TXPOWER. - */ -static void iwl_bg_statistics_periodic(unsigned long data) -{ - struct iwl_priv *priv = (struct iwl_priv *)data; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - /* dont send host command if rf-kill is on */ - if (!iwl_is_ready_rf(priv)) - return; - - iwl_send_statistics_request(priv, CMD_ASYNC, false); -} - - -static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base, - u32 start_idx, u32 num_events, - u32 mode) -{ - u32 i; - u32 ptr; /* SRAM byte address of log data */ - u32 ev, time, data; /* event log data */ - unsigned long reg_flags; - - if (mode == 0) - ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32)); - else - ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32)); - - /* Make sure device is powered up for SRAM reads */ - spin_lock_irqsave(&priv->reg_lock, reg_flags); - if (iwl_grab_nic_access(priv)) { - spin_unlock_irqrestore(&priv->reg_lock, reg_flags); - return; - } - - /* Set starting address; reads will auto-increment */ - _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr); - rmb(); - - /* - * "time" is actually "data" for mode 0 (no timestamp). - * place event id # at far right for easier visual parsing. - */ - for (i = 0; i < num_events; i++) { - ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - if (mode == 0) { - trace_iwlwifi_dev_ucode_cont_event(priv, - 0, time, ev); - } else { - data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - trace_iwlwifi_dev_ucode_cont_event(priv, - time, data, ev); - } - } - /* Allow device to power down */ - iwl_release_nic_access(priv); - spin_unlock_irqrestore(&priv->reg_lock, reg_flags); -} - -static void iwl_continuous_event_trace(struct iwl_priv *priv) -{ - u32 capacity; /* event log capacity in # entries */ - u32 base; /* SRAM byte address of event log header */ - u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ - u32 num_wraps; /* # times uCode wrapped to top of log */ - u32 next_entry; /* index of next entry to be written by uCode */ - - if (priv->ucode_type == UCODE_INIT) - base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr); - else - base = le32_to_cpu(priv->card_alive.log_event_table_ptr); - if (priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { - capacity = iwl_read_targ_mem(priv, base); - num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32))); - mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32))); - next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32))); - } else - return; - - if (num_wraps == priv->event_log.num_wraps) { - iwl_print_cont_event_trace(priv, - base, priv->event_log.next_entry, - next_entry - priv->event_log.next_entry, - mode); - priv->event_log.non_wraps_count++; - } else { - if ((num_wraps - priv->event_log.num_wraps) > 1) - priv->event_log.wraps_more_count++; - else - priv->event_log.wraps_once_count++; - trace_iwlwifi_dev_ucode_wrap_event(priv, - num_wraps - priv->event_log.num_wraps, - next_entry, priv->event_log.next_entry); - if (next_entry < priv->event_log.next_entry) { - iwl_print_cont_event_trace(priv, base, - priv->event_log.next_entry, - capacity - priv->event_log.next_entry, - mode); - - iwl_print_cont_event_trace(priv, base, 0, - next_entry, mode); - } else { - iwl_print_cont_event_trace(priv, base, - next_entry, capacity - next_entry, - mode); - - iwl_print_cont_event_trace(priv, base, 0, - next_entry, mode); - } - } - priv->event_log.num_wraps = num_wraps; - priv->event_log.next_entry = next_entry; -} - -/** - * iwl_bg_ucode_trace - Timer callback to log ucode event - * - * The timer is continually set to execute every - * UCODE_TRACE_PERIOD milliseconds after the last timer expired - * this function is to perform continuous uCode event logging operation - * if enabled - */ -static void iwl_bg_ucode_trace(unsigned long data) -{ - struct iwl_priv *priv = (struct iwl_priv *)data; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (priv->event_log.ucode_trace) { - iwl_continuous_event_trace(priv); - /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */ - mod_timer(&priv->ucode_trace, - jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD)); - } -} - -static void iwl_rx_beacon_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl4965_beacon_notif *beacon = - (struct iwl4965_beacon_notif *)pkt->u.raw; -#ifdef CONFIG_IWLWIFI_DEBUG - u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); - - IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d " - "tsf %d %d rate %d\n", - le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK, - beacon->beacon_notify_hdr.failure_frame, - le32_to_cpu(beacon->ibss_mgr_status), - le32_to_cpu(beacon->high_tsf), - le32_to_cpu(beacon->low_tsf), rate); -#endif - - priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); - - if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) - queue_work(priv->workqueue, &priv->beacon_update); -} - -/* Handle notification from uCode that card's power state is changing - * due to software, hardware, or critical temperature RFKILL */ -static void iwl_rx_card_state_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); - unsigned long status = priv->status; - - IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s CT:%s\n", - (flags & HW_CARD_DISABLED) ? "Kill" : "On", - (flags & SW_CARD_DISABLED) ? "Kill" : "On", - (flags & CT_CARD_DISABLED) ? - "Reached" : "Not reached"); - - if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | - CT_CARD_DISABLED)) { - - iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - - iwl_write_direct32(priv, HBUS_TARG_MBX_C, - HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); - - if (!(flags & RXON_CARD_DISABLED)) { - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - iwl_write_direct32(priv, HBUS_TARG_MBX_C, - HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); - } - if (flags & CT_CARD_DISABLED) - iwl_tt_enter_ct_kill(priv); - } - if (!(flags & CT_CARD_DISABLED)) - iwl_tt_exit_ct_kill(priv); - - if (flags & HW_CARD_DISABLED) - set_bit(STATUS_RF_KILL_HW, &priv->status); - else - clear_bit(STATUS_RF_KILL_HW, &priv->status); - - - if (!(flags & RXON_CARD_DISABLED)) - iwl_scan_cancel(priv); - - if ((test_bit(STATUS_RF_KILL_HW, &status) != - test_bit(STATUS_RF_KILL_HW, &priv->status))) - wiphy_rfkill_set_hw_state(priv->hw->wiphy, - test_bit(STATUS_RF_KILL_HW, &priv->status)); - else - wake_up_interruptible(&priv->wait_command_queue); -} - -static void iwl_bg_tx_flush(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, tx_flush); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - /* do nothing if rf-kill is on */ - if (!iwl_is_ready_rf(priv)) - return; - - if (priv->cfg->ops->lib->txfifo_flush) { - IWL_DEBUG_INFO(priv, "device request: flush all tx frames\n"); - iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL); - } -} - -/** - * iwl_setup_rx_handlers - Initialize Rx handler callbacks - * - * Setup the RX handlers for each of the reply types sent from the uCode - * to the host. - * - * This function chains into the hardware specific files for them to setup - * any hardware specific handlers as well. - */ -static void iwl_setup_rx_handlers(struct iwl_priv *priv) -{ - priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive; - priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error; - priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa; - priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] = - iwl_rx_spectrum_measure_notif; - priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif; - priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] = - iwl_rx_pm_debug_statistics_notif; - priv->rx_handlers[BEACON_NOTIFICATION] = iwl_rx_beacon_notif; - - /* - * The same handler is used for both the REPLY to a discrete - * statistics request from the host as well as for the periodic - * statistics notifications (after received beacons) from the uCode. - */ - priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_reply_statistics; - priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl_rx_statistics; - - iwl_setup_rx_scan_handlers(priv); - - /* status change handler */ - priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl_rx_card_state_notif; - - priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] = - iwl_rx_missed_beacon_notif; - /* Rx handlers */ - priv->rx_handlers[REPLY_RX_PHY_CMD] = iwlagn_rx_reply_rx_phy; - priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwlagn_rx_reply_rx; - /* block ack */ - priv->rx_handlers[REPLY_COMPRESSED_BA] = iwlagn_rx_reply_compressed_ba; - /* Set up hardware specific Rx handlers */ - priv->cfg->ops->lib->rx_handler_setup(priv); -} - -/** - * iwl_rx_handle - Main entry function for receiving responses from uCode - * - * Uses the priv->rx_handlers callback function array to invoke - * the appropriate handlers, including command responses, - * frame-received notifications, and other notifications. - */ -void iwl_rx_handle(struct iwl_priv *priv) -{ - struct iwl_rx_mem_buffer *rxb; - struct iwl_rx_packet *pkt; - struct iwl_rx_queue *rxq = &priv->rxq; - u32 r, i; - int reclaim; - unsigned long flags; - u8 fill_rx = 0; - u32 count = 8; - int total_empty; - - /* uCode's read index (stored in shared DRAM) indicates the last Rx - * buffer that the driver may process (last buffer filled by ucode). */ - r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; - i = rxq->read; - - /* Rx interrupt, but nothing sent from uCode */ - if (i == r) - IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i); - - /* calculate total frames need to be restock after handling RX */ - total_empty = r - rxq->write_actual; - if (total_empty < 0) - total_empty += RX_QUEUE_SIZE; - - if (total_empty > (RX_QUEUE_SIZE / 2)) - fill_rx = 1; - - while (i != r) { - int len; - - rxb = rxq->queue[i]; - - /* If an RXB doesn't have a Rx queue slot associated with it, - * then a bug has been introduced in the queue refilling - * routines -- catch it here */ - BUG_ON(rxb == NULL); - - rxq->queue[i] = NULL; - - pci_unmap_page(priv->pci_dev, rxb->page_dma, - PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - pkt = rxb_addr(rxb); - - len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; - len += sizeof(u32); /* account for status word */ - trace_iwlwifi_dev_rx(priv, pkt, len); - - /* Reclaim a command buffer only if this packet is a response - * to a (driver-originated) command. - * If the packet (e.g. Rx frame) originated from uCode, - * there is no command buffer to reclaim. - * Ucode should set SEQ_RX_FRAME bit if ucode-originated, - * but apparently a few don't get set; catch them here. */ - reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) && - (pkt->hdr.cmd != REPLY_RX_PHY_CMD) && - (pkt->hdr.cmd != REPLY_RX) && - (pkt->hdr.cmd != REPLY_RX_MPDU_CMD) && - (pkt->hdr.cmd != REPLY_COMPRESSED_BA) && - (pkt->hdr.cmd != STATISTICS_NOTIFICATION) && - (pkt->hdr.cmd != REPLY_TX); - - /* Based on type of command response or notification, - * handle those that need handling via function in - * rx_handlers table. See iwl_setup_rx_handlers() */ - if (priv->rx_handlers[pkt->hdr.cmd]) { - IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r, - i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); - priv->isr_stats.rx_handlers[pkt->hdr.cmd]++; - priv->rx_handlers[pkt->hdr.cmd] (priv, rxb); - } else { - /* No handling needed */ - IWL_DEBUG_RX(priv, - "r %d i %d No handler needed for %s, 0x%02x\n", - r, i, get_cmd_string(pkt->hdr.cmd), - pkt->hdr.cmd); - } - - /* - * XXX: After here, we should always check rxb->page - * against NULL before touching it or its virtual - * memory (pkt). Because some rx_handler might have - * already taken or freed the pages. - */ - - if (reclaim) { - /* Invoke any callbacks, transfer the buffer to caller, - * and fire off the (possibly) blocking iwl_send_cmd() - * as we reclaim the driver command queue */ - if (rxb->page) - iwl_tx_cmd_complete(priv, rxb); - else - IWL_WARN(priv, "Claim null rxb?\n"); - } - - /* Reuse the page if possible. For notification packets and - * SKBs that fail to Rx correctly, add them back into the - * rx_free list for reuse later. */ - spin_lock_irqsave(&rxq->lock, flags); - if (rxb->page != NULL) { - rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page, - 0, PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; - } else - list_add_tail(&rxb->list, &rxq->rx_used); - - spin_unlock_irqrestore(&rxq->lock, flags); - - i = (i + 1) & RX_QUEUE_MASK; - /* If there are a lot of unused frames, - * restock the Rx queue so ucode wont assert. */ - if (fill_rx) { - count++; - if (count >= 8) { - rxq->read = i; - iwlagn_rx_replenish_now(priv); - count = 0; - } - } - } - - /* Backtrack one entry */ - rxq->read = i; - if (fill_rx) - iwlagn_rx_replenish_now(priv); - else - iwlagn_rx_queue_restock(priv); -} - -/* call this function to flush any scheduled tasklet */ -static inline void iwl_synchronize_irq(struct iwl_priv *priv) -{ - /* wait to make sure we flush pending tasklet*/ - synchronize_irq(priv->pci_dev->irq); - tasklet_kill(&priv->irq_tasklet); -} - -static void iwl_irq_tasklet_legacy(struct iwl_priv *priv) -{ - u32 inta, handled = 0; - u32 inta_fh; - unsigned long flags; - u32 i; -#ifdef CONFIG_IWLWIFI_DEBUG - u32 inta_mask; -#endif - - spin_lock_irqsave(&priv->lock, flags); - - /* Ack/clear/reset pending uCode interrupts. - * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, - * and will clear only when CSR_FH_INT_STATUS gets cleared. */ - inta = iwl_read32(priv, CSR_INT); - iwl_write32(priv, CSR_INT, inta); - - /* Ack/clear/reset pending flow-handler (DMA) interrupts. - * Any new interrupts that happen after this, either while we're - * in this tasklet, or later, will show up in next ISR/tasklet. */ - inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); - iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh); - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_get_debug_level(priv) & IWL_DL_ISR) { - /* just for debug */ - inta_mask = iwl_read32(priv, CSR_INT_MASK); - IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", - inta, inta_mask, inta_fh); - } -#endif - - spin_unlock_irqrestore(&priv->lock, flags); - - /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not - * atomic, make sure that inta covers all the interrupts that - * we've discovered, even if FH interrupt came in just after - * reading CSR_INT. */ - if (inta_fh & CSR49_FH_INT_RX_MASK) - inta |= CSR_INT_BIT_FH_RX; - if (inta_fh & CSR49_FH_INT_TX_MASK) - inta |= CSR_INT_BIT_FH_TX; - - /* Now service all interrupt bits discovered above. */ - if (inta & CSR_INT_BIT_HW_ERR) { - IWL_ERR(priv, "Hardware error detected. Restarting.\n"); - - /* Tell the device to stop sending interrupts */ - iwl_disable_interrupts(priv); - - priv->isr_stats.hw++; - iwl_irq_handle_error(priv); - - handled |= CSR_INT_BIT_HW_ERR; - - return; - } - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) { - /* NIC fires this, but we don't use it, redundant with WAKEUP */ - if (inta & CSR_INT_BIT_SCD) { - IWL_DEBUG_ISR(priv, "Scheduler finished to transmit " - "the frame/frames.\n"); - priv->isr_stats.sch++; - } - - /* Alive notification via Rx interrupt will do the real work */ - if (inta & CSR_INT_BIT_ALIVE) { - IWL_DEBUG_ISR(priv, "Alive interrupt\n"); - priv->isr_stats.alive++; - } - } -#endif - /* Safely ignore these bits for debug checks below */ - inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); - - /* HW RF KILL switch toggled */ - if (inta & CSR_INT_BIT_RF_KILL) { - int hw_rf_kill = 0; - if (!(iwl_read32(priv, CSR_GP_CNTRL) & - CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) - hw_rf_kill = 1; - - IWL_WARN(priv, "RF_KILL bit toggled to %s.\n", - hw_rf_kill ? "disable radio" : "enable radio"); - - priv->isr_stats.rfkill++; - - /* driver only loads ucode once setting the interface up. - * the driver allows loading the ucode even if the radio - * is killed. Hence update the killswitch state here. The - * rfkill handler will care about restarting if needed. - */ - if (!test_bit(STATUS_ALIVE, &priv->status)) { - if (hw_rf_kill) - set_bit(STATUS_RF_KILL_HW, &priv->status); - else - clear_bit(STATUS_RF_KILL_HW, &priv->status); - wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill); - } - - handled |= CSR_INT_BIT_RF_KILL; - } - - /* Chip got too hot and stopped itself */ - if (inta & CSR_INT_BIT_CT_KILL) { - IWL_ERR(priv, "Microcode CT kill error detected.\n"); - priv->isr_stats.ctkill++; - handled |= CSR_INT_BIT_CT_KILL; - } - - /* Error detected by uCode */ - if (inta & CSR_INT_BIT_SW_ERR) { - IWL_ERR(priv, "Microcode SW error detected. " - " Restarting 0x%X.\n", inta); - priv->isr_stats.sw++; - iwl_irq_handle_error(priv); - handled |= CSR_INT_BIT_SW_ERR; - } - - /* - * uCode wakes up after power-down sleep. - * Tell device about any new tx or host commands enqueued, - * and about any Rx buffers made available while asleep. - */ - if (inta & CSR_INT_BIT_WAKEUP) { - IWL_DEBUG_ISR(priv, "Wakeup interrupt\n"); - iwl_rx_queue_update_write_ptr(priv, &priv->rxq); - for (i = 0; i < priv->hw_params.max_txq_num; i++) - iwl_txq_update_write_ptr(priv, &priv->txq[i]); - priv->isr_stats.wakeup++; - handled |= CSR_INT_BIT_WAKEUP; - } - - /* All uCode command responses, including Tx command responses, - * Rx "responses" (frame-received notification), and other - * notifications from uCode come through here*/ - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { - iwl_rx_handle(priv); - priv->isr_stats.rx++; - handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); - } - - /* This "Tx" DMA channel is used only for loading uCode */ - if (inta & CSR_INT_BIT_FH_TX) { - IWL_DEBUG_ISR(priv, "uCode load interrupt\n"); - priv->isr_stats.tx++; - handled |= CSR_INT_BIT_FH_TX; - /* Wake up uCode load routine, now that load is complete */ - priv->ucode_write_complete = 1; - wake_up_interruptible(&priv->wait_command_queue); - } - - if (inta & ~handled) { - IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled); - priv->isr_stats.unhandled++; - } - - if (inta & ~(priv->inta_mask)) { - IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n", - inta & ~priv->inta_mask); - IWL_WARN(priv, " with FH_INT = 0x%08x\n", inta_fh); - } - - /* Re-enable all interrupts */ - /* only Re-enable if disabled by irq */ - if (test_bit(STATUS_INT_ENABLED, &priv->status)) - iwl_enable_interrupts(priv); - /* Re-enable RF_KILL if it occurred */ - else if (handled & CSR_INT_BIT_RF_KILL) - iwl_enable_rfkill_int(priv); - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) { - inta = iwl_read32(priv, CSR_INT); - inta_mask = iwl_read32(priv, CSR_INT_MASK); - inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); - IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " - "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); - } -#endif -} - -/* tasklet for iwlagn interrupt */ -static void iwl_irq_tasklet(struct iwl_priv *priv) -{ - u32 inta = 0; - u32 handled = 0; - unsigned long flags; - u32 i; -#ifdef CONFIG_IWLWIFI_DEBUG - u32 inta_mask; -#endif - - spin_lock_irqsave(&priv->lock, flags); - - /* Ack/clear/reset pending uCode interrupts. - * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, - */ - /* There is a hardware bug in the interrupt mask function that some - * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if - * they are disabled in the CSR_INT_MASK register. Furthermore the - * ICT interrupt handling mechanism has another bug that might cause - * these unmasked interrupts fail to be detected. We workaround the - * hardware bugs here by ACKing all the possible interrupts so that - * interrupt coalescing can still be achieved. - */ - iwl_write32(priv, CSR_INT, priv->_agn.inta | ~priv->inta_mask); - - inta = priv->_agn.inta; - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_get_debug_level(priv) & IWL_DL_ISR) { - /* just for debug */ - inta_mask = iwl_read32(priv, CSR_INT_MASK); - IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ", - inta, inta_mask); - } -#endif - - spin_unlock_irqrestore(&priv->lock, flags); - - /* saved interrupt in inta variable now we can reset priv->_agn.inta */ - priv->_agn.inta = 0; - - /* Now service all interrupt bits discovered above. */ - if (inta & CSR_INT_BIT_HW_ERR) { - IWL_ERR(priv, "Hardware error detected. Restarting.\n"); - - /* Tell the device to stop sending interrupts */ - iwl_disable_interrupts(priv); - - priv->isr_stats.hw++; - iwl_irq_handle_error(priv); - - handled |= CSR_INT_BIT_HW_ERR; - - return; - } - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) { - /* NIC fires this, but we don't use it, redundant with WAKEUP */ - if (inta & CSR_INT_BIT_SCD) { - IWL_DEBUG_ISR(priv, "Scheduler finished to transmit " - "the frame/frames.\n"); - priv->isr_stats.sch++; - } - - /* Alive notification via Rx interrupt will do the real work */ - if (inta & CSR_INT_BIT_ALIVE) { - IWL_DEBUG_ISR(priv, "Alive interrupt\n"); - priv->isr_stats.alive++; - } - } -#endif - /* Safely ignore these bits for debug checks below */ - inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); - - /* HW RF KILL switch toggled */ - if (inta & CSR_INT_BIT_RF_KILL) { - int hw_rf_kill = 0; - if (!(iwl_read32(priv, CSR_GP_CNTRL) & - CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) - hw_rf_kill = 1; - - IWL_WARN(priv, "RF_KILL bit toggled to %s.\n", - hw_rf_kill ? "disable radio" : "enable radio"); - - priv->isr_stats.rfkill++; - - /* driver only loads ucode once setting the interface up. - * the driver allows loading the ucode even if the radio - * is killed. Hence update the killswitch state here. The - * rfkill handler will care about restarting if needed. - */ - if (!test_bit(STATUS_ALIVE, &priv->status)) { - if (hw_rf_kill) - set_bit(STATUS_RF_KILL_HW, &priv->status); - else - clear_bit(STATUS_RF_KILL_HW, &priv->status); - wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill); - } - - handled |= CSR_INT_BIT_RF_KILL; - } - - /* Chip got too hot and stopped itself */ - if (inta & CSR_INT_BIT_CT_KILL) { - IWL_ERR(priv, "Microcode CT kill error detected.\n"); - priv->isr_stats.ctkill++; - handled |= CSR_INT_BIT_CT_KILL; - } - - /* Error detected by uCode */ - if (inta & CSR_INT_BIT_SW_ERR) { - IWL_ERR(priv, "Microcode SW error detected. " - " Restarting 0x%X.\n", inta); - priv->isr_stats.sw++; - iwl_irq_handle_error(priv); - handled |= CSR_INT_BIT_SW_ERR; - } - - /* uCode wakes up after power-down sleep */ - if (inta & CSR_INT_BIT_WAKEUP) { - IWL_DEBUG_ISR(priv, "Wakeup interrupt\n"); - iwl_rx_queue_update_write_ptr(priv, &priv->rxq); - for (i = 0; i < priv->hw_params.max_txq_num; i++) - iwl_txq_update_write_ptr(priv, &priv->txq[i]); - - priv->isr_stats.wakeup++; - - handled |= CSR_INT_BIT_WAKEUP; - } - - /* All uCode command responses, including Tx command responses, - * Rx "responses" (frame-received notification), and other - * notifications from uCode come through here*/ - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX | - CSR_INT_BIT_RX_PERIODIC)) { - IWL_DEBUG_ISR(priv, "Rx interrupt\n"); - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { - handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); - iwl_write32(priv, CSR_FH_INT_STATUS, - CSR49_FH_INT_RX_MASK); - } - if (inta & CSR_INT_BIT_RX_PERIODIC) { - handled |= CSR_INT_BIT_RX_PERIODIC; - iwl_write32(priv, CSR_INT, CSR_INT_BIT_RX_PERIODIC); - } - /* Sending RX interrupt require many steps to be done in the - * the device: - * 1- write interrupt to current index in ICT table. - * 2- dma RX frame. - * 3- update RX shared data to indicate last write index. - * 4- send interrupt. - * This could lead to RX race, driver could receive RX interrupt - * but the shared data changes does not reflect this; - * periodic interrupt will detect any dangling Rx activity. - */ - - /* Disable periodic interrupt; we use it as just a one-shot. */ - iwl_write8(priv, CSR_INT_PERIODIC_REG, - CSR_INT_PERIODIC_DIS); - iwl_rx_handle(priv); - - /* - * Enable periodic interrupt in 8 msec only if we received - * real RX interrupt (instead of just periodic int), to catch - * any dangling Rx interrupt. If it was just the periodic - * interrupt, there was no dangling Rx activity, and no need - * to extend the periodic interrupt; one-shot is enough. - */ - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) - iwl_write8(priv, CSR_INT_PERIODIC_REG, - CSR_INT_PERIODIC_ENA); - - priv->isr_stats.rx++; - } - - /* This "Tx" DMA channel is used only for loading uCode */ - if (inta & CSR_INT_BIT_FH_TX) { - iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_TX_MASK); - IWL_DEBUG_ISR(priv, "uCode load interrupt\n"); - priv->isr_stats.tx++; - handled |= CSR_INT_BIT_FH_TX; - /* Wake up uCode load routine, now that load is complete */ - priv->ucode_write_complete = 1; - wake_up_interruptible(&priv->wait_command_queue); - } - - if (inta & ~handled) { - IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled); - priv->isr_stats.unhandled++; - } - - if (inta & ~(priv->inta_mask)) { - IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n", - inta & ~priv->inta_mask); - } - - /* Re-enable all interrupts */ - /* only Re-enable if disabled by irq */ - if (test_bit(STATUS_INT_ENABLED, &priv->status)) - iwl_enable_interrupts(priv); - /* Re-enable RF_KILL if it occurred */ - else if (handled & CSR_INT_BIT_RF_KILL) - iwl_enable_rfkill_int(priv); -} - -/* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */ -#define ACK_CNT_RATIO (50) -#define BA_TIMEOUT_CNT (5) -#define BA_TIMEOUT_MAX (16) - -/** - * iwl_good_ack_health - checks for ACK count ratios, BA timeout retries. - * - * When the ACK count ratio is 0 and aggregated BA timeout retries exceeding - * the BA_TIMEOUT_MAX, reload firmware and bring system back to normal - * operation state. - */ -bool iwl_good_ack_health(struct iwl_priv *priv, - struct iwl_rx_packet *pkt) -{ - bool rc = true; - int actual_ack_cnt_delta, expected_ack_cnt_delta; - int ba_timeout_delta; - - actual_ack_cnt_delta = - le32_to_cpu(pkt->u.stats.tx.actual_ack_cnt) - - le32_to_cpu(priv->_agn.statistics.tx.actual_ack_cnt); - expected_ack_cnt_delta = - le32_to_cpu(pkt->u.stats.tx.expected_ack_cnt) - - le32_to_cpu(priv->_agn.statistics.tx.expected_ack_cnt); - ba_timeout_delta = - le32_to_cpu(pkt->u.stats.tx.agg.ba_timeout) - - le32_to_cpu(priv->_agn.statistics.tx.agg.ba_timeout); - if ((priv->_agn.agg_tids_count > 0) && - (expected_ack_cnt_delta > 0) && - (((actual_ack_cnt_delta * 100) / expected_ack_cnt_delta) - < ACK_CNT_RATIO) && - (ba_timeout_delta > BA_TIMEOUT_CNT)) { - IWL_DEBUG_RADIO(priv, "actual_ack_cnt delta = %d," - " expected_ack_cnt = %d\n", - actual_ack_cnt_delta, expected_ack_cnt_delta); - -#ifdef CONFIG_IWLWIFI_DEBUGFS - /* - * This is ifdef'ed on DEBUGFS because otherwise the - * statistics aren't available. If DEBUGFS is set but - * DEBUG is not, these will just compile out. - */ - IWL_DEBUG_RADIO(priv, "rx_detected_cnt delta = %d\n", - priv->_agn.delta_statistics.tx.rx_detected_cnt); - IWL_DEBUG_RADIO(priv, - "ack_or_ba_timeout_collision delta = %d\n", - priv->_agn.delta_statistics.tx. - ack_or_ba_timeout_collision); -#endif - IWL_DEBUG_RADIO(priv, "agg ba_timeout delta = %d\n", - ba_timeout_delta); - if (!actual_ack_cnt_delta && - (ba_timeout_delta >= BA_TIMEOUT_MAX)) - rc = false; - } - return rc; -} - - -/***************************************************************************** - * - * sysfs attributes - * - *****************************************************************************/ - -#ifdef CONFIG_IWLWIFI_DEBUG - -/* - * The following adds a new attribute to the sysfs representation - * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/) - * used for controlling the debug level. - * - * See the level definitions in iwl for details. - * - * The debug_level being managed using sysfs below is a per device debug - * level that is used instead of the global debug level if it (the per - * device debug level) is set. - */ -static ssize_t show_debug_level(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv)); -} -static ssize_t store_debug_level(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - unsigned long val; - int ret; - - ret = strict_strtoul(buf, 0, &val); - if (ret) - IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf); - else { - priv->debug_level = val; - if (iwl_alloc_traffic_mem(priv)) - IWL_ERR(priv, - "Not enough memory to generate traffic log\n"); - } - return strnlen(buf, count); -} - -static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, - show_debug_level, store_debug_level); - - -#endif /* CONFIG_IWLWIFI_DEBUG */ - - -static ssize_t show_temperature(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - return sprintf(buf, "%d\n", priv->temperature); -} - -static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL); - -static ssize_t show_tx_power(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - - if (!iwl_is_ready_rf(priv)) - return sprintf(buf, "off\n"); - else - return sprintf(buf, "%d\n", priv->tx_power_user_lmt); -} - -static ssize_t store_tx_power(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - unsigned long val; - int ret; - - ret = strict_strtoul(buf, 10, &val); - if (ret) - IWL_INFO(priv, "%s is not in decimal form.\n", buf); - else { - ret = iwl_set_tx_power(priv, val, false); - if (ret) - IWL_ERR(priv, "failed setting tx power (0x%d).\n", - ret); - else - ret = count; - } - return ret; -} - -static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power); - -static struct attribute *iwl_sysfs_entries[] = { - &dev_attr_temperature.attr, - &dev_attr_tx_power.attr, -#ifdef CONFIG_IWLWIFI_DEBUG - &dev_attr_debug_level.attr, -#endif - NULL -}; - -static struct attribute_group iwl_attribute_group = { - .name = NULL, /* put in device directory */ - .attrs = iwl_sysfs_entries, -}; - -/****************************************************************************** - * - * uCode download functions - * - ******************************************************************************/ - -static void iwl_dealloc_ucode_pci(struct iwl_priv *priv) -{ - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot); -} - -static void iwl_nic_start(struct iwl_priv *priv) -{ - /* Remove all resets to allow NIC to operate */ - iwl_write32(priv, CSR_RESET, 0); -} - -struct iwlagn_ucode_capabilities { - u32 max_probe_length; - u32 standard_phy_calibration_size; - bool pan; -}; - -static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context); -static int iwl_mac_setup_register(struct iwl_priv *priv, - struct iwlagn_ucode_capabilities *capa); - -#define UCODE_EXPERIMENTAL_INDEX 100 -#define UCODE_EXPERIMENTAL_TAG "exp" - -static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first) -{ - const char *name_pre = priv->cfg->fw_name_pre; - char tag[8]; - - if (first) { -#ifdef CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE - priv->fw_index = UCODE_EXPERIMENTAL_INDEX; - strcpy(tag, UCODE_EXPERIMENTAL_TAG); - } else if (priv->fw_index == UCODE_EXPERIMENTAL_INDEX) { -#endif - priv->fw_index = priv->cfg->ucode_api_max; - sprintf(tag, "%d", priv->fw_index); - } else { - priv->fw_index--; - sprintf(tag, "%d", priv->fw_index); - } - - if (priv->fw_index < priv->cfg->ucode_api_min) { - IWL_ERR(priv, "no suitable firmware found!\n"); - return -ENOENT; - } - - sprintf(priv->firmware_name, "%s%s%s", name_pre, tag, ".ucode"); - - IWL_DEBUG_INFO(priv, "attempting to load firmware %s'%s'\n", - (priv->fw_index == UCODE_EXPERIMENTAL_INDEX) - ? "EXPERIMENTAL " : "", - priv->firmware_name); - - return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name, - &priv->pci_dev->dev, GFP_KERNEL, priv, - iwl_ucode_callback); -} - -struct iwlagn_firmware_pieces { - const void *inst, *data, *init, *init_data, *boot; - size_t inst_size, data_size, init_size, init_data_size, boot_size; - - u32 build; - - u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr; - u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr; -}; - -static int iwlagn_load_legacy_firmware(struct iwl_priv *priv, - const struct firmware *ucode_raw, - struct iwlagn_firmware_pieces *pieces) -{ - struct iwl_ucode_header *ucode = (void *)ucode_raw->data; - u32 api_ver, hdr_size; - const u8 *src; - - priv->ucode_ver = le32_to_cpu(ucode->ver); - api_ver = IWL_UCODE_API(priv->ucode_ver); - - switch (api_ver) { - default: - /* - * 4965 doesn't revision the firmware file format - * along with the API version, it always uses v1 - * file format. - */ - if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != - CSR_HW_REV_TYPE_4965) { - hdr_size = 28; - if (ucode_raw->size < hdr_size) { - IWL_ERR(priv, "File size too small!\n"); - return -EINVAL; - } - pieces->build = le32_to_cpu(ucode->u.v2.build); - pieces->inst_size = le32_to_cpu(ucode->u.v2.inst_size); - pieces->data_size = le32_to_cpu(ucode->u.v2.data_size); - pieces->init_size = le32_to_cpu(ucode->u.v2.init_size); - pieces->init_data_size = le32_to_cpu(ucode->u.v2.init_data_size); - pieces->boot_size = le32_to_cpu(ucode->u.v2.boot_size); - src = ucode->u.v2.data; - break; - } - /* fall through for 4965 */ - case 0: - case 1: - case 2: - hdr_size = 24; - if (ucode_raw->size < hdr_size) { - IWL_ERR(priv, "File size too small!\n"); - return -EINVAL; - } - pieces->build = 0; - pieces->inst_size = le32_to_cpu(ucode->u.v1.inst_size); - pieces->data_size = le32_to_cpu(ucode->u.v1.data_size); - pieces->init_size = le32_to_cpu(ucode->u.v1.init_size); - pieces->init_data_size = le32_to_cpu(ucode->u.v1.init_data_size); - pieces->boot_size = le32_to_cpu(ucode->u.v1.boot_size); - src = ucode->u.v1.data; - break; - } - - /* Verify size of file vs. image size info in file's header */ - if (ucode_raw->size != hdr_size + pieces->inst_size + - pieces->data_size + pieces->init_size + - pieces->init_data_size + pieces->boot_size) { - - IWL_ERR(priv, - "uCode file size %d does not match expected size\n", - (int)ucode_raw->size); - return -EINVAL; - } - - pieces->inst = src; - src += pieces->inst_size; - pieces->data = src; - src += pieces->data_size; - pieces->init = src; - src += pieces->init_size; - pieces->init_data = src; - src += pieces->init_data_size; - pieces->boot = src; - src += pieces->boot_size; - - return 0; -} - -static int iwlagn_wanted_ucode_alternative = 1; - -static int iwlagn_load_firmware(struct iwl_priv *priv, - const struct firmware *ucode_raw, - struct iwlagn_firmware_pieces *pieces, - struct iwlagn_ucode_capabilities *capa) -{ - struct iwl_tlv_ucode_header *ucode = (void *)ucode_raw->data; - struct iwl_ucode_tlv *tlv; - size_t len = ucode_raw->size; - const u8 *data; - int wanted_alternative = iwlagn_wanted_ucode_alternative, tmp; - u64 alternatives; - u32 tlv_len; - enum iwl_ucode_tlv_type tlv_type; - const u8 *tlv_data; - - if (len < sizeof(*ucode)) { - IWL_ERR(priv, "uCode has invalid length: %zd\n", len); - return -EINVAL; - } - - if (ucode->magic != cpu_to_le32(IWL_TLV_UCODE_MAGIC)) { - IWL_ERR(priv, "invalid uCode magic: 0X%x\n", - le32_to_cpu(ucode->magic)); - return -EINVAL; - } - - /* - * Check which alternatives are present, and "downgrade" - * when the chosen alternative is not present, warning - * the user when that happens. Some files may not have - * any alternatives, so don't warn in that case. - */ - alternatives = le64_to_cpu(ucode->alternatives); - tmp = wanted_alternative; - if (wanted_alternative > 63) - wanted_alternative = 63; - while (wanted_alternative && !(alternatives & BIT(wanted_alternative))) - wanted_alternative--; - if (wanted_alternative && wanted_alternative != tmp) - IWL_WARN(priv, - "uCode alternative %d not available, choosing %d\n", - tmp, wanted_alternative); - - priv->ucode_ver = le32_to_cpu(ucode->ver); - pieces->build = le32_to_cpu(ucode->build); - data = ucode->data; - - len -= sizeof(*ucode); - - while (len >= sizeof(*tlv)) { - u16 tlv_alt; - - len -= sizeof(*tlv); - tlv = (void *)data; - - tlv_len = le32_to_cpu(tlv->length); - tlv_type = le16_to_cpu(tlv->type); - tlv_alt = le16_to_cpu(tlv->alternative); - tlv_data = tlv->data; - - if (len < tlv_len) { - IWL_ERR(priv, "invalid TLV len: %zd/%u\n", - len, tlv_len); - return -EINVAL; - } - len -= ALIGN(tlv_len, 4); - data += sizeof(*tlv) + ALIGN(tlv_len, 4); - - /* - * Alternative 0 is always valid. - * - * Skip alternative TLVs that are not selected. - */ - if (tlv_alt != 0 && tlv_alt != wanted_alternative) - continue; - - switch (tlv_type) { - case IWL_UCODE_TLV_INST: - pieces->inst = tlv_data; - pieces->inst_size = tlv_len; - break; - case IWL_UCODE_TLV_DATA: - pieces->data = tlv_data; - pieces->data_size = tlv_len; - break; - case IWL_UCODE_TLV_INIT: - pieces->init = tlv_data; - pieces->init_size = tlv_len; - break; - case IWL_UCODE_TLV_INIT_DATA: - pieces->init_data = tlv_data; - pieces->init_data_size = tlv_len; - break; - case IWL_UCODE_TLV_BOOT: - pieces->boot = tlv_data; - pieces->boot_size = tlv_len; - break; - case IWL_UCODE_TLV_PROBE_MAX_LEN: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - capa->max_probe_length = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_PAN: - if (tlv_len) - goto invalid_tlv_len; - capa->pan = true; - break; - case IWL_UCODE_TLV_INIT_EVTLOG_PTR: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->init_evtlog_ptr = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_INIT_EVTLOG_SIZE: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->init_evtlog_size = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_INIT_ERRLOG_PTR: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->init_errlog_ptr = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_RUNT_EVTLOG_PTR: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->inst_evtlog_ptr = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_RUNT_EVTLOG_SIZE: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->inst_evtlog_size = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_RUNT_ERRLOG_PTR: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->inst_errlog_ptr = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_ENHANCE_SENS_TBL: - if (tlv_len) - goto invalid_tlv_len; - priv->enhance_sensitivity_table = true; - break; - case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - capa->standard_phy_calibration_size = - le32_to_cpup((__le32 *)tlv_data); - break; - default: - IWL_WARN(priv, "unknown TLV: %d\n", tlv_type); - break; - } - } - - if (len) { - IWL_ERR(priv, "invalid TLV after parsing: %zd\n", len); - iwl_print_hex_dump(priv, IWL_DL_FW, (u8 *)data, len); - return -EINVAL; - } - - return 0; - - invalid_tlv_len: - IWL_ERR(priv, "TLV %d has invalid size: %u\n", tlv_type, tlv_len); - iwl_print_hex_dump(priv, IWL_DL_FW, tlv_data, tlv_len); - - return -EINVAL; -} - -/** - * iwl_ucode_callback - callback when firmware was loaded - * - * If loaded successfully, copies the firmware into buffers - * for the card to fetch (via DMA). - */ -static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context) -{ - struct iwl_priv *priv = context; - struct iwl_ucode_header *ucode; - int err; - struct iwlagn_firmware_pieces pieces; - const unsigned int api_max = priv->cfg->ucode_api_max; - const unsigned int api_min = priv->cfg->ucode_api_min; - u32 api_ver; - char buildstr[25]; - u32 build; - struct iwlagn_ucode_capabilities ucode_capa = { - .max_probe_length = 200, - .standard_phy_calibration_size = - IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE, - }; - - memset(&pieces, 0, sizeof(pieces)); - - if (!ucode_raw) { - if (priv->fw_index <= priv->cfg->ucode_api_max) - IWL_ERR(priv, - "request for firmware file '%s' failed.\n", - priv->firmware_name); - goto try_again; - } - - IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n", - priv->firmware_name, ucode_raw->size); - - /* Make sure that we got at least the API version number */ - if (ucode_raw->size < 4) { - IWL_ERR(priv, "File size way too small!\n"); - goto try_again; - } - - /* Data from ucode file: header followed by uCode images */ - ucode = (struct iwl_ucode_header *)ucode_raw->data; - - if (ucode->ver) - err = iwlagn_load_legacy_firmware(priv, ucode_raw, &pieces); - else - err = iwlagn_load_firmware(priv, ucode_raw, &pieces, - &ucode_capa); - - if (err) - goto try_again; - - api_ver = IWL_UCODE_API(priv->ucode_ver); - build = pieces.build; - - /* - * api_ver should match the api version forming part of the - * firmware filename ... but we don't check for that and only rely - * on the API version read from firmware header from here on forward - */ - /* no api version check required for experimental uCode */ - if (priv->fw_index != UCODE_EXPERIMENTAL_INDEX) { - if (api_ver < api_min || api_ver > api_max) { - IWL_ERR(priv, - "Driver unable to support your firmware API. " - "Driver supports v%u, firmware is v%u.\n", - api_max, api_ver); - goto try_again; - } - - if (api_ver != api_max) - IWL_ERR(priv, - "Firmware has old API version. Expected v%u, " - "got v%u. New firmware can be obtained " - "from http://www.intellinuxwireless.org.\n", - api_max, api_ver); - } - - if (build) - sprintf(buildstr, " build %u%s", build, - (priv->fw_index == UCODE_EXPERIMENTAL_INDEX) - ? " (EXP)" : ""); - else - buildstr[0] = '\0'; - - IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u%s\n", - IWL_UCODE_MAJOR(priv->ucode_ver), - IWL_UCODE_MINOR(priv->ucode_ver), - IWL_UCODE_API(priv->ucode_ver), - IWL_UCODE_SERIAL(priv->ucode_ver), - buildstr); - - snprintf(priv->hw->wiphy->fw_version, - sizeof(priv->hw->wiphy->fw_version), - "%u.%u.%u.%u%s", - IWL_UCODE_MAJOR(priv->ucode_ver), - IWL_UCODE_MINOR(priv->ucode_ver), - IWL_UCODE_API(priv->ucode_ver), - IWL_UCODE_SERIAL(priv->ucode_ver), - buildstr); - - /* - * For any of the failures below (before allocating pci memory) - * we will try to load a version with a smaller API -- maybe the - * user just got a corrupted version of the latest API. - */ - - IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n", - priv->ucode_ver); - IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %Zd\n", - pieces.inst_size); - IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %Zd\n", - pieces.data_size); - IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %Zd\n", - pieces.init_size); - IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %Zd\n", - pieces.init_data_size); - IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %Zd\n", - pieces.boot_size); - - /* Verify that uCode images will fit in card's SRAM */ - if (pieces.inst_size > priv->hw_params.max_inst_size) { - IWL_ERR(priv, "uCode instr len %Zd too large to fit in\n", - pieces.inst_size); - goto try_again; - } - - if (pieces.data_size > priv->hw_params.max_data_size) { - IWL_ERR(priv, "uCode data len %Zd too large to fit in\n", - pieces.data_size); - goto try_again; - } - - if (pieces.init_size > priv->hw_params.max_inst_size) { - IWL_ERR(priv, "uCode init instr len %Zd too large to fit in\n", - pieces.init_size); - goto try_again; - } - - if (pieces.init_data_size > priv->hw_params.max_data_size) { - IWL_ERR(priv, "uCode init data len %Zd too large to fit in\n", - pieces.init_data_size); - goto try_again; - } - - if (pieces.boot_size > priv->hw_params.max_bsm_size) { - IWL_ERR(priv, "uCode boot instr len %Zd too large to fit in\n", - pieces.boot_size); - goto try_again; - } - - /* Allocate ucode buffers for card's bus-master loading ... */ - - /* Runtime instructions and 2 copies of data: - * 1) unmodified from disk - * 2) backup cache for save/restore during power-downs */ - priv->ucode_code.len = pieces.inst_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code); - - priv->ucode_data.len = pieces.data_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data); - - priv->ucode_data_backup.len = pieces.data_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup); - - if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr || - !priv->ucode_data_backup.v_addr) - goto err_pci_alloc; - - /* Initialization instructions and data */ - if (pieces.init_size && pieces.init_data_size) { - priv->ucode_init.len = pieces.init_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init); - - priv->ucode_init_data.len = pieces.init_data_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data); - - if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr) - goto err_pci_alloc; - } - - /* Bootstrap (instructions only, no data) */ - if (pieces.boot_size) { - priv->ucode_boot.len = pieces.boot_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot); - - if (!priv->ucode_boot.v_addr) - goto err_pci_alloc; - } - - /* Now that we can no longer fail, copy information */ - - /* - * The (size - 16) / 12 formula is based on the information recorded - * for each event, which is of mode 1 (including timestamp) for all - * new microcodes that include this information. - */ - priv->_agn.init_evtlog_ptr = pieces.init_evtlog_ptr; - if (pieces.init_evtlog_size) - priv->_agn.init_evtlog_size = (pieces.init_evtlog_size - 16)/12; - else - priv->_agn.init_evtlog_size = - priv->cfg->base_params->max_event_log_size; - priv->_agn.init_errlog_ptr = pieces.init_errlog_ptr; - priv->_agn.inst_evtlog_ptr = pieces.inst_evtlog_ptr; - if (pieces.inst_evtlog_size) - priv->_agn.inst_evtlog_size = (pieces.inst_evtlog_size - 16)/12; - else - priv->_agn.inst_evtlog_size = - priv->cfg->base_params->max_event_log_size; - priv->_agn.inst_errlog_ptr = pieces.inst_errlog_ptr; - - if (ucode_capa.pan) { - priv->valid_contexts |= BIT(IWL_RXON_CTX_PAN); - priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN; - } else - priv->sta_key_max_num = STA_KEY_MAX_NUM; - - /* Copy images into buffers for card's bus-master reads ... */ - - /* Runtime instructions (first block of data in file) */ - IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode instr len %Zd\n", - pieces.inst_size); - memcpy(priv->ucode_code.v_addr, pieces.inst, pieces.inst_size); - - IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", - priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr); - - /* - * Runtime data - * NOTE: Copy into backup buffer will be done in iwl_up() - */ - IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode data len %Zd\n", - pieces.data_size); - memcpy(priv->ucode_data.v_addr, pieces.data, pieces.data_size); - memcpy(priv->ucode_data_backup.v_addr, pieces.data, pieces.data_size); - - /* Initialization instructions */ - if (pieces.init_size) { - IWL_DEBUG_INFO(priv, "Copying (but not loading) init instr len %Zd\n", - pieces.init_size); - memcpy(priv->ucode_init.v_addr, pieces.init, pieces.init_size); - } - - /* Initialization data */ - if (pieces.init_data_size) { - IWL_DEBUG_INFO(priv, "Copying (but not loading) init data len %Zd\n", - pieces.init_data_size); - memcpy(priv->ucode_init_data.v_addr, pieces.init_data, - pieces.init_data_size); - } - - /* Bootstrap instructions */ - IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", - pieces.boot_size); - memcpy(priv->ucode_boot.v_addr, pieces.boot, pieces.boot_size); - - /* - * figure out the offset of chain noise reset and gain commands - * base on the size of standard phy calibration commands table size - */ - if (ucode_capa.standard_phy_calibration_size > - IWL_MAX_PHY_CALIBRATE_TBL_SIZE) - ucode_capa.standard_phy_calibration_size = - IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE; - - priv->_agn.phy_calib_chain_noise_reset_cmd = - ucode_capa.standard_phy_calibration_size; - priv->_agn.phy_calib_chain_noise_gain_cmd = - ucode_capa.standard_phy_calibration_size + 1; - - /************************************************** - * This is still part of probe() in a sense... - * - * 9. Setup and register with mac80211 and debugfs - **************************************************/ - err = iwl_mac_setup_register(priv, &ucode_capa); - if (err) - goto out_unbind; - - err = iwl_dbgfs_register(priv, DRV_NAME); - if (err) - IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err); - - err = sysfs_create_group(&priv->pci_dev->dev.kobj, - &iwl_attribute_group); - if (err) { - IWL_ERR(priv, "failed to create sysfs device attributes\n"); - goto out_unbind; - } - - /* We have our copies now, allow OS release its copies */ - release_firmware(ucode_raw); - complete(&priv->_agn.firmware_loading_complete); - return; - - try_again: - /* try next, if any */ - if (iwl_request_firmware(priv, false)) - goto out_unbind; - release_firmware(ucode_raw); - return; - - err_pci_alloc: - IWL_ERR(priv, "failed to allocate pci memory\n"); - iwl_dealloc_ucode_pci(priv); - out_unbind: - complete(&priv->_agn.firmware_loading_complete); - device_release_driver(&priv->pci_dev->dev); - release_firmware(ucode_raw); -} - -static const char *desc_lookup_text[] = { - "OK", - "FAIL", - "BAD_PARAM", - "BAD_CHECKSUM", - "NMI_INTERRUPT_WDG", - "SYSASSERT", - "FATAL_ERROR", - "BAD_COMMAND", - "HW_ERROR_TUNE_LOCK", - "HW_ERROR_TEMPERATURE", - "ILLEGAL_CHAN_FREQ", - "VCC_NOT_STABLE", - "FH_ERROR", - "NMI_INTERRUPT_HOST", - "NMI_INTERRUPT_ACTION_PT", - "NMI_INTERRUPT_UNKNOWN", - "UCODE_VERSION_MISMATCH", - "HW_ERROR_ABS_LOCK", - "HW_ERROR_CAL_LOCK_FAIL", - "NMI_INTERRUPT_INST_ACTION_PT", - "NMI_INTERRUPT_DATA_ACTION_PT", - "NMI_TRM_HW_ER", - "NMI_INTERRUPT_TRM", - "NMI_INTERRUPT_BREAK_POINT" - "DEBUG_0", - "DEBUG_1", - "DEBUG_2", - "DEBUG_3", -}; - -static struct { char *name; u8 num; } advanced_lookup[] = { - { "NMI_INTERRUPT_WDG", 0x34 }, - { "SYSASSERT", 0x35 }, - { "UCODE_VERSION_MISMATCH", 0x37 }, - { "BAD_COMMAND", 0x38 }, - { "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C }, - { "FATAL_ERROR", 0x3D }, - { "NMI_TRM_HW_ERR", 0x46 }, - { "NMI_INTERRUPT_TRM", 0x4C }, - { "NMI_INTERRUPT_BREAK_POINT", 0x54 }, - { "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C }, - { "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 }, - { "NMI_INTERRUPT_HOST", 0x66 }, - { "NMI_INTERRUPT_ACTION_PT", 0x7C }, - { "NMI_INTERRUPT_UNKNOWN", 0x84 }, - { "NMI_INTERRUPT_INST_ACTION_PT", 0x86 }, - { "ADVANCED_SYSASSERT", 0 }, -}; - -static const char *desc_lookup(u32 num) -{ - int i; - int max = ARRAY_SIZE(desc_lookup_text); - - if (num < max) - return desc_lookup_text[num]; - - max = ARRAY_SIZE(advanced_lookup) - 1; - for (i = 0; i < max; i++) { - if (advanced_lookup[i].num == num) - break;; - } - return advanced_lookup[i].name; -} - -#define ERROR_START_OFFSET (1 * sizeof(u32)) -#define ERROR_ELEM_SIZE (7 * sizeof(u32)) - -void iwl_dump_nic_error_log(struct iwl_priv *priv) -{ - u32 data2, line; - u32 desc, time, count, base, data1; - u32 blink1, blink2, ilink1, ilink2; - u32 pc, hcmd; - - if (priv->ucode_type == UCODE_INIT) { - base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr); - if (!base) - base = priv->_agn.init_errlog_ptr; - } else { - base = le32_to_cpu(priv->card_alive.error_event_table_ptr); - if (!base) - base = priv->_agn.inst_errlog_ptr; - } - - if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { - IWL_ERR(priv, - "Not valid error log pointer 0x%08X for %s uCode\n", - base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT"); - return; - } - - count = iwl_read_targ_mem(priv, base); - - if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { - IWL_ERR(priv, "Start IWL Error Log Dump:\n"); - IWL_ERR(priv, "Status: 0x%08lX, count: %d\n", - priv->status, count); - } - - desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32)); - priv->isr_stats.err_code = desc; - pc = iwl_read_targ_mem(priv, base + 2 * sizeof(u32)); - blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32)); - blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32)); - ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32)); - ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32)); - data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32)); - data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32)); - line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32)); - time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32)); - hcmd = iwl_read_targ_mem(priv, base + 22 * sizeof(u32)); - - trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, data2, line, - blink1, blink2, ilink1, ilink2); - - IWL_ERR(priv, "Desc Time " - "data1 data2 line\n"); - IWL_ERR(priv, "%-28s (0x%04X) %010u 0x%08X 0x%08X %u\n", - desc_lookup(desc), desc, time, data1, data2, line); - IWL_ERR(priv, "pc blink1 blink2 ilink1 ilink2 hcmd\n"); - IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n", - pc, blink1, blink2, ilink1, ilink2, hcmd); -} - -#define EVENT_START_OFFSET (4 * sizeof(u32)) - -/** - * iwl_print_event_log - Dump error event log to syslog - * - */ -static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, - u32 num_events, u32 mode, - int pos, char **buf, size_t bufsz) -{ - u32 i; - u32 base; /* SRAM byte address of event log header */ - u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ - u32 ptr; /* SRAM byte address of log data */ - u32 ev, time, data; /* event log data */ - unsigned long reg_flags; - - if (num_events == 0) - return pos; - - if (priv->ucode_type == UCODE_INIT) { - base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); - if (!base) - base = priv->_agn.init_evtlog_ptr; - } else { - base = le32_to_cpu(priv->card_alive.log_event_table_ptr); - if (!base) - base = priv->_agn.inst_evtlog_ptr; - } - - if (mode == 0) - event_size = 2 * sizeof(u32); - else - event_size = 3 * sizeof(u32); - - ptr = base + EVENT_START_OFFSET + (start_idx * event_size); - - /* Make sure device is powered up for SRAM reads */ - spin_lock_irqsave(&priv->reg_lock, reg_flags); - iwl_grab_nic_access(priv); - - /* Set starting address; reads will auto-increment */ - _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr); - rmb(); - - /* "time" is actually "data" for mode 0 (no timestamp). - * place event id # at far right for easier visual parsing. */ - for (i = 0; i < num_events; i++) { - ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - if (mode == 0) { - /* data, ev */ - if (bufsz) { - pos += scnprintf(*buf + pos, bufsz - pos, - "EVT_LOG:0x%08x:%04u\n", - time, ev); - } else { - trace_iwlwifi_dev_ucode_event(priv, 0, - time, ev); - IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", - time, ev); - } - } else { - data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - if (bufsz) { - pos += scnprintf(*buf + pos, bufsz - pos, - "EVT_LOGT:%010u:0x%08x:%04u\n", - time, data, ev); - } else { - IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n", - time, data, ev); - trace_iwlwifi_dev_ucode_event(priv, time, - data, ev); - } - } - } - - /* Allow device to power down */ - iwl_release_nic_access(priv); - spin_unlock_irqrestore(&priv->reg_lock, reg_flags); - return pos; -} - -/** - * iwl_print_last_event_logs - Dump the newest # of event log to syslog - */ -static int iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity, - u32 num_wraps, u32 next_entry, - u32 size, u32 mode, - int pos, char **buf, size_t bufsz) -{ - /* - * display the newest DEFAULT_LOG_ENTRIES entries - * i.e the entries just before the next ont that uCode would fill. - */ - if (num_wraps) { - if (next_entry < size) { - pos = iwl_print_event_log(priv, - capacity - (size - next_entry), - size - next_entry, mode, - pos, buf, bufsz); - pos = iwl_print_event_log(priv, 0, - next_entry, mode, - pos, buf, bufsz); - } else - pos = iwl_print_event_log(priv, next_entry - size, - size, mode, pos, buf, bufsz); - } else { - if (next_entry < size) { - pos = iwl_print_event_log(priv, 0, next_entry, - mode, pos, buf, bufsz); - } else { - pos = iwl_print_event_log(priv, next_entry - size, - size, mode, pos, buf, bufsz); - } - } - return pos; -} - -#define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20) - -int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log, - char **buf, bool display) -{ - u32 base; /* SRAM byte address of event log header */ - u32 capacity; /* event log capacity in # entries */ - u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ - u32 num_wraps; /* # times uCode wrapped to top of log */ - u32 next_entry; /* index of next entry to be written by uCode */ - u32 size; /* # entries that we'll print */ - u32 logsize; - int pos = 0; - size_t bufsz = 0; - - if (priv->ucode_type == UCODE_INIT) { - base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); - logsize = priv->_agn.init_evtlog_size; - if (!base) - base = priv->_agn.init_evtlog_ptr; - } else { - base = le32_to_cpu(priv->card_alive.log_event_table_ptr); - logsize = priv->_agn.inst_evtlog_size; - if (!base) - base = priv->_agn.inst_evtlog_ptr; - } - - if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { - IWL_ERR(priv, - "Invalid event log pointer 0x%08X for %s uCode\n", - base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT"); - return -EINVAL; - } - - /* event log header */ - capacity = iwl_read_targ_mem(priv, base); - mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32))); - num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32))); - next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32))); - - if (capacity > logsize) { - IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n", - capacity, logsize); - capacity = logsize; - } - - if (next_entry > logsize) { - IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n", - next_entry, logsize); - next_entry = logsize; - } - - size = num_wraps ? capacity : next_entry; - - /* bail out if nothing in log */ - if (size == 0) { - IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n"); - return pos; - } - - /* enable/disable bt channel inhibition */ - priv->bt_ch_announce = iwlagn_bt_ch_announce; - -#ifdef CONFIG_IWLWIFI_DEBUG - if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log) - size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES) - ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size; -#else - size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES) - ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size; -#endif - IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n", - size); - -#ifdef CONFIG_IWLWIFI_DEBUG - if (display) { - if (full_log) - bufsz = capacity * 48; - else - bufsz = size * 48; - *buf = kmalloc(bufsz, GFP_KERNEL); - if (!*buf) - return -ENOMEM; - } - if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) { - /* - * if uCode has wrapped back to top of log, - * start at the oldest entry, - * i.e the next one that uCode would fill. - */ - if (num_wraps) - pos = iwl_print_event_log(priv, next_entry, - capacity - next_entry, mode, - pos, buf, bufsz); - /* (then/else) start at top of log */ - pos = iwl_print_event_log(priv, 0, - next_entry, mode, pos, buf, bufsz); - } else - pos = iwl_print_last_event_logs(priv, capacity, num_wraps, - next_entry, size, mode, - pos, buf, bufsz); -#else - pos = iwl_print_last_event_logs(priv, capacity, num_wraps, - next_entry, size, mode, - pos, buf, bufsz); -#endif - return pos; -} - -static void iwl_rf_kill_ct_config(struct iwl_priv *priv) -{ - struct iwl_ct_kill_config cmd; - struct iwl_ct_kill_throttling_config adv_cmd; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&priv->lock, flags); - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); - spin_unlock_irqrestore(&priv->lock, flags); - priv->thermal_throttle.ct_kill_toggle = false; - - if (priv->cfg->base_params->support_ct_kill_exit) { - adv_cmd.critical_temperature_enter = - cpu_to_le32(priv->hw_params.ct_kill_threshold); - adv_cmd.critical_temperature_exit = - cpu_to_le32(priv->hw_params.ct_kill_exit_threshold); - - ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD, - sizeof(adv_cmd), &adv_cmd); - if (ret) - IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); - else - IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " - "succeeded, " - "critical temperature enter is %d," - "exit is %d\n", - priv->hw_params.ct_kill_threshold, - priv->hw_params.ct_kill_exit_threshold); - } else { - cmd.critical_temperature_R = - cpu_to_le32(priv->hw_params.ct_kill_threshold); - - ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD, - sizeof(cmd), &cmd); - if (ret) - IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); - else - IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " - "succeeded, " - "critical temperature is %d\n", - priv->hw_params.ct_kill_threshold); - } -} - -static int iwlagn_send_calib_cfg_rt(struct iwl_priv *priv, u32 cfg) -{ - struct iwl_calib_cfg_cmd calib_cfg_cmd; - struct iwl_host_cmd cmd = { - .id = CALIBRATION_CFG_CMD, - .len = sizeof(struct iwl_calib_cfg_cmd), - .data = &calib_cfg_cmd, - }; - - memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd)); - calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_INIT_CFG_ALL; - calib_cfg_cmd.ucd_calib_cfg.once.start = cpu_to_le32(cfg); - - return iwl_send_cmd(priv, &cmd); -} - - -/** - * iwl_alive_start - called after REPLY_ALIVE notification received - * from protocol/runtime uCode (initialization uCode's - * Alive gets handled by iwl_init_alive_start()). - */ -static void iwl_alive_start(struct iwl_priv *priv) -{ - int ret = 0; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - IWL_DEBUG_INFO(priv, "Runtime Alive received.\n"); - - if (priv->card_alive.is_valid != UCODE_VALID_OK) { - /* We had an error bringing up the hardware, so take it - * all the way back down so we can try again */ - IWL_DEBUG_INFO(priv, "Alive failed.\n"); - goto restart; - } - - /* Initialize uCode has loaded Runtime uCode ... verify inst image. - * This is a paranoid check, because we would not have gotten the - * "runtime" alive if code weren't properly loaded. */ - if (iwl_verify_ucode(priv)) { - /* Runtime instruction load was bad; - * take it all the way back down so we can try again */ - IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n"); - goto restart; - } - - ret = priv->cfg->ops->lib->alive_notify(priv); - if (ret) { - IWL_WARN(priv, - "Could not complete ALIVE transition [ntf]: %d\n", ret); - goto restart; - } - - - /* After the ALIVE response, we can send host commands to the uCode */ - set_bit(STATUS_ALIVE, &priv->status); - - /* Enable watchdog to monitor the driver tx queues */ - iwl_setup_watchdog(priv); - - if (iwl_is_rfkill(priv)) - return; - - /* download priority table before any calibration request */ - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist) { - /* Configure Bluetooth device coexistence support */ - priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK; - priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT; - priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT; - priv->cfg->ops->hcmd->send_bt_config(priv); - priv->bt_valid = IWLAGN_BT_VALID_ENABLE_FLAGS; - iwlagn_send_prio_tbl(priv); - - /* FIXME: w/a to force change uCode BT state machine */ - iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN, - BT_COEX_PRIO_TBL_EVT_INIT_CALIB2); - iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE, - BT_COEX_PRIO_TBL_EVT_INIT_CALIB2); - } - if (priv->hw_params.calib_rt_cfg) - iwlagn_send_calib_cfg_rt(priv, priv->hw_params.calib_rt_cfg); - - ieee80211_wake_queues(priv->hw); - - priv->active_rate = IWL_RATES_MASK; - - /* Configure Tx antenna selection based on H/W config */ - if (priv->cfg->ops->hcmd->set_tx_ant) - priv->cfg->ops->hcmd->set_tx_ant(priv, priv->cfg->valid_tx_ant); - - if (iwl_is_associated_ctx(ctx)) { - struct iwl_rxon_cmd *active_rxon = - (struct iwl_rxon_cmd *)&ctx->active; - /* apply any changes in staging */ - ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; - active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; - } else { - struct iwl_rxon_context *tmp; - /* Initialize our rx_config data */ - for_each_context(priv, tmp) - iwl_connection_init_rx_config(priv, tmp); - - if (priv->cfg->ops->hcmd->set_rxon_chain) - priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx); - } - - if (priv->cfg->bt_params && - !priv->cfg->bt_params->advanced_bt_coexist) { - /* Configure Bluetooth device coexistence support */ - priv->cfg->ops->hcmd->send_bt_config(priv); - } - - iwl_reset_run_time_calib(priv); - - set_bit(STATUS_READY, &priv->status); - - /* Configure the adapter for unassociated operation */ - iwlcore_commit_rxon(priv, ctx); - - /* At this point, the NIC is initialized and operational */ - iwl_rf_kill_ct_config(priv); - - iwl_leds_init(priv); - - IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n"); - wake_up_interruptible(&priv->wait_command_queue); - - iwl_power_update_mode(priv, true); - IWL_DEBUG_INFO(priv, "Updated power mode\n"); - - - return; - - restart: - queue_work(priv->workqueue, &priv->restart); -} - -static void iwl_cancel_deferred_work(struct iwl_priv *priv); - -static void __iwl_down(struct iwl_priv *priv) -{ - unsigned long flags; - int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status); - - IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n"); - - iwl_scan_cancel_timeout(priv, 200); - - exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &priv->status); - - /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set - * to prevent rearm timer */ - del_timer_sync(&priv->watchdog); - - iwl_clear_ucode_stations(priv, NULL); - iwl_dealloc_bcast_stations(priv); - iwl_clear_driver_stations(priv); - - /* reset BT coex data */ - priv->bt_status = 0; - if (priv->cfg->bt_params) - priv->bt_traffic_load = - priv->cfg->bt_params->bt_init_traffic_load; - else - priv->bt_traffic_load = 0; - priv->bt_sco_active = false; - priv->bt_full_concurrent = false; - priv->bt_ci_compliance = 0; - - /* Unblock any waiting calls */ - wake_up_interruptible_all(&priv->wait_command_queue); - - /* Wipe out the EXIT_PENDING status bit if we are not actually - * exiting the module */ - if (!exit_pending) - clear_bit(STATUS_EXIT_PENDING, &priv->status); - - /* stop and reset the on-board processor */ - iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); - - /* tell the device to stop sending interrupts */ - spin_lock_irqsave(&priv->lock, flags); - iwl_disable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - iwl_synchronize_irq(priv); - - if (priv->mac80211_registered) - ieee80211_stop_queues(priv->hw); - - /* If we have not previously called iwl_init() then - * clear all bits but the RF Kill bit and return */ - if (!iwl_is_init(priv)) { - priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) << - STATUS_RF_KILL_HW | - test_bit(STATUS_GEO_CONFIGURED, &priv->status) << - STATUS_GEO_CONFIGURED | - test_bit(STATUS_EXIT_PENDING, &priv->status) << - STATUS_EXIT_PENDING; - goto exit; - } - - /* ...otherwise clear out all the status bits but the RF Kill - * bit and continue taking the NIC down. */ - priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) << - STATUS_RF_KILL_HW | - test_bit(STATUS_GEO_CONFIGURED, &priv->status) << - STATUS_GEO_CONFIGURED | - test_bit(STATUS_FW_ERROR, &priv->status) << - STATUS_FW_ERROR | - test_bit(STATUS_EXIT_PENDING, &priv->status) << - STATUS_EXIT_PENDING; - - /* device going down, Stop using ICT table */ - if (priv->cfg->ops->lib->isr_ops.disable) - priv->cfg->ops->lib->isr_ops.disable(priv); - - iwlagn_txq_ctx_stop(priv); - iwlagn_rxq_stop(priv); - - /* Power-down device's busmaster DMA clocks */ - iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT); - udelay(5); - - /* Make sure (redundant) we've released our request to stay awake */ - iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - - /* Stop the device, and put it in low power state */ - iwl_apm_stop(priv); - - exit: - memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp)); - - dev_kfree_skb(priv->beacon_skb); - priv->beacon_skb = NULL; - - /* clear out any free frames */ - iwl_clear_free_frames(priv); -} - -static void iwl_down(struct iwl_priv *priv) -{ - mutex_lock(&priv->mutex); - __iwl_down(priv); - mutex_unlock(&priv->mutex); - - iwl_cancel_deferred_work(priv); -} - -#define HW_READY_TIMEOUT (50) - -static int iwl_set_hw_ready(struct iwl_priv *priv) -{ - int ret = 0; - - iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_NIC_READY); - - /* See if we got it */ - ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, - CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, - HW_READY_TIMEOUT); - if (ret != -ETIMEDOUT) - priv->hw_ready = true; - else - priv->hw_ready = false; - - IWL_DEBUG_INFO(priv, "hardware %s\n", - (priv->hw_ready == 1) ? "ready" : "not ready"); - return ret; -} - -static int iwl_prepare_card_hw(struct iwl_priv *priv) -{ - int ret = 0; - - IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter\n"); - - ret = iwl_set_hw_ready(priv); - if (priv->hw_ready) - return ret; - - /* If HW is not ready, prepare the conditions to check again */ - iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_PREPARE); - - ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG, - ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, - CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000); - - /* HW should be ready by now, check again. */ - if (ret != -ETIMEDOUT) - iwl_set_hw_ready(priv); - - return ret; -} - -#define MAX_HW_RESTARTS 5 - -static int __iwl_up(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx; - int i; - int ret; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { - IWL_WARN(priv, "Exit pending; will not bring the NIC up\n"); - return -EIO; - } - - if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) { - IWL_ERR(priv, "ucode not available for device bringup\n"); - return -EIO; - } - - for_each_context(priv, ctx) { - ret = iwlagn_alloc_bcast_station(priv, ctx); - if (ret) { - iwl_dealloc_bcast_stations(priv); - return ret; - } - } - - iwl_prepare_card_hw(priv); - - if (!priv->hw_ready) { - IWL_WARN(priv, "Exit HW not ready\n"); - return -EIO; - } - - /* If platform's RF_KILL switch is NOT set to KILL */ - if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) - clear_bit(STATUS_RF_KILL_HW, &priv->status); - else - set_bit(STATUS_RF_KILL_HW, &priv->status); - - if (iwl_is_rfkill(priv)) { - wiphy_rfkill_set_hw_state(priv->hw->wiphy, true); - - iwl_enable_interrupts(priv); - IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n"); - return 0; - } - - iwl_write32(priv, CSR_INT, 0xFFFFFFFF); - - /* must be initialised before iwl_hw_nic_init */ - if (priv->valid_contexts != BIT(IWL_RXON_CTX_BSS)) - priv->cmd_queue = IWL_IPAN_CMD_QUEUE_NUM; - else - priv->cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM; - - ret = iwlagn_hw_nic_init(priv); - if (ret) { - IWL_ERR(priv, "Unable to init nic\n"); - return ret; - } - - /* make sure rfkill handshake bits are cleared */ - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - - /* clear (again), then enable host interrupts */ - iwl_write32(priv, CSR_INT, 0xFFFFFFFF); - iwl_enable_interrupts(priv); - - /* really make sure rfkill handshake bits are cleared */ - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - - /* Copy original ucode data image from disk into backup cache. - * This will be used to initialize the on-board processor's - * data SRAM for a clean start when the runtime program first loads. */ - memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr, - priv->ucode_data.len); - - for (i = 0; i < MAX_HW_RESTARTS; i++) { - - /* load bootstrap state machine, - * load bootstrap program into processor's memory, - * prepare to load the "initialize" uCode */ - ret = priv->cfg->ops->lib->load_ucode(priv); - - if (ret) { - IWL_ERR(priv, "Unable to set up bootstrap uCode: %d\n", - ret); - continue; - } - - /* start card; "initialize" will load runtime ucode */ - iwl_nic_start(priv); - - IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n"); - - return 0; - } - - set_bit(STATUS_EXIT_PENDING, &priv->status); - __iwl_down(priv); - clear_bit(STATUS_EXIT_PENDING, &priv->status); - - /* tried to restart and config the device for as long as our - * patience could withstand */ - IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i); - return -EIO; -} - - -/***************************************************************************** - * - * Workqueue callbacks - * - *****************************************************************************/ - -static void iwl_bg_init_alive_start(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, init_alive_start.work); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - priv->cfg->ops->lib->init_alive_start(priv); - mutex_unlock(&priv->mutex); -} - -static void iwl_bg_alive_start(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, alive_start.work); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - /* enable dram interrupt */ - if (priv->cfg->ops->lib->isr_ops.reset) - priv->cfg->ops->lib->isr_ops.reset(priv); - - mutex_lock(&priv->mutex); - iwl_alive_start(priv); - mutex_unlock(&priv->mutex); -} - -static void iwl_bg_run_time_calib_work(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, - run_time_calib_work); - - mutex_lock(&priv->mutex); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status) || - test_bit(STATUS_SCANNING, &priv->status)) { - mutex_unlock(&priv->mutex); - return; - } - - if (priv->start_calib) { - if (priv->cfg->bt_params && - priv->cfg->bt_params->bt_statistics) { - iwl_chain_noise_calibration(priv, - (void *)&priv->_agn.statistics_bt); - iwl_sensitivity_calibration(priv, - (void *)&priv->_agn.statistics_bt); - } else { - iwl_chain_noise_calibration(priv, - (void *)&priv->_agn.statistics); - iwl_sensitivity_calibration(priv, - (void *)&priv->_agn.statistics); - } - } - - mutex_unlock(&priv->mutex); -} - -static void iwl_bg_restart(struct work_struct *data) -{ - struct iwl_priv *priv = container_of(data, struct iwl_priv, restart); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) { - struct iwl_rxon_context *ctx; - bool bt_sco, bt_full_concurrent; - u8 bt_ci_compliance; - u8 bt_load; - u8 bt_status; - - mutex_lock(&priv->mutex); - for_each_context(priv, ctx) - ctx->vif = NULL; - priv->is_open = 0; - - /* - * __iwl_down() will clear the BT status variables, - * which is correct, but when we restart we really - * want to keep them so restore them afterwards. - * - * The restart process will later pick them up and - * re-configure the hw when we reconfigure the BT - * command. - */ - bt_sco = priv->bt_sco_active; - bt_full_concurrent = priv->bt_full_concurrent; - bt_ci_compliance = priv->bt_ci_compliance; - bt_load = priv->bt_traffic_load; - bt_status = priv->bt_status; - - __iwl_down(priv); - - priv->bt_sco_active = bt_sco; - priv->bt_full_concurrent = bt_full_concurrent; - priv->bt_ci_compliance = bt_ci_compliance; - priv->bt_traffic_load = bt_load; - priv->bt_status = bt_status; - - mutex_unlock(&priv->mutex); - iwl_cancel_deferred_work(priv); - ieee80211_restart_hw(priv->hw); - } else { - iwl_down(priv); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - __iwl_up(priv); - mutex_unlock(&priv->mutex); - } -} - -static void iwl_bg_rx_replenish(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, rx_replenish); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - iwlagn_rx_replenish(priv); - mutex_unlock(&priv->mutex); -} - -/***************************************************************************** - * - * mac80211 entry point functions - * - *****************************************************************************/ - -#define UCODE_READY_TIMEOUT (4 * HZ) - -/* - * Not a mac80211 entry point function, but it fits in with all the - * other mac80211 functions grouped here. - */ -static int iwl_mac_setup_register(struct iwl_priv *priv, - struct iwlagn_ucode_capabilities *capa) -{ - int ret; - struct ieee80211_hw *hw = priv->hw; - struct iwl_rxon_context *ctx; - - hw->rate_control_algorithm = "iwl-agn-rs"; - - /* Tell mac80211 our characteristics */ - hw->flags = IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_AMPDU_AGGREGATION | - IEEE80211_HW_NEED_DTIM_PERIOD | - IEEE80211_HW_SPECTRUM_MGMT | - IEEE80211_HW_REPORTS_TX_ACK_STATUS; - - if (!priv->cfg->base_params->broken_powersave) - hw->flags |= IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_SUPPORTS_DYNAMIC_PS; - - if (priv->cfg->sku & IWL_SKU_N) - hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | - IEEE80211_HW_SUPPORTS_STATIC_SMPS; - - hw->sta_data_size = sizeof(struct iwl_station_priv); - hw->vif_data_size = sizeof(struct iwl_vif_priv); - - for_each_context(priv, ctx) { - hw->wiphy->interface_modes |= ctx->interface_modes; - hw->wiphy->interface_modes |= ctx->exclusive_interface_modes; - } - - hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY | - WIPHY_FLAG_DISABLE_BEACON_HINTS; - - /* - * For now, disable PS by default because it affects - * RX performance significantly. - */ - hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; - - hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX; - /* we create the 802.11 header and a zero-length SSID element */ - hw->wiphy->max_scan_ie_len = capa->max_probe_length - 24 - 2; - - /* Default value; 4 EDCA QOS priorities */ - hw->queues = 4; - - hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL; - - if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) - priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = - &priv->bands[IEEE80211_BAND_2GHZ]; - if (priv->bands[IEEE80211_BAND_5GHZ].n_channels) - priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = - &priv->bands[IEEE80211_BAND_5GHZ]; - - ret = ieee80211_register_hw(priv->hw); - if (ret) { - IWL_ERR(priv, "Failed to register hw (error %d)\n", ret); - return ret; - } - priv->mac80211_registered = 1; - - return 0; -} - - -int iwlagn_mac_start(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - int ret; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - /* we should be verifying the device is ready to be opened */ - mutex_lock(&priv->mutex); - ret = __iwl_up(priv); - mutex_unlock(&priv->mutex); - - if (ret) - return ret; - - if (iwl_is_rfkill(priv)) - goto out; - - IWL_DEBUG_INFO(priv, "Start UP work done.\n"); - - /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from - * mac80211 will not be run successfully. */ - ret = wait_event_interruptible_timeout(priv->wait_command_queue, - test_bit(STATUS_READY, &priv->status), - UCODE_READY_TIMEOUT); - if (!ret) { - if (!test_bit(STATUS_READY, &priv->status)) { - IWL_ERR(priv, "START_ALIVE timeout after %dms.\n", - jiffies_to_msecs(UCODE_READY_TIMEOUT)); - return -ETIMEDOUT; - } - } - - iwl_led_start(priv); - -out: - priv->is_open = 1; - IWL_DEBUG_MAC80211(priv, "leave\n"); - return 0; -} - -void iwlagn_mac_stop(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (!priv->is_open) - return; - - priv->is_open = 0; - - iwl_down(priv); - - flush_workqueue(priv->workqueue); - - /* User space software may expect getting rfkill changes - * even if interface is down */ - iwl_write32(priv, CSR_INT, 0xFFFFFFFF); - iwl_enable_rfkill_int(priv); - - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -int iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MACDUMP(priv, "enter\n"); - - IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, - ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); - - if (iwlagn_tx_skb(priv, skb)) - dev_kfree_skb_any(skb); - - IWL_DEBUG_MACDUMP(priv, "leave\n"); - return NETDEV_TX_OK; -} - -void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_key_conf *keyconf, - struct ieee80211_sta *sta, - u32 iv32, u16 *phase1key) -{ - struct iwl_priv *priv = hw->priv; - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - iwl_update_tkip_key(priv, vif_priv->ctx, keyconf, sta, - iv32, phase1key); - - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - struct ieee80211_vif *vif, struct ieee80211_sta *sta, - struct ieee80211_key_conf *key) -{ - struct iwl_priv *priv = hw->priv; - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - struct iwl_rxon_context *ctx = vif_priv->ctx; - int ret; - u8 sta_id; - bool is_default_wep_key = false; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (priv->cfg->mod_params->sw_crypto) { - IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n"); - return -EOPNOTSUPP; - } - - sta_id = iwl_sta_id_or_broadcast(priv, vif_priv->ctx, sta); - if (sta_id == IWL_INVALID_STATION) - return -EINVAL; - - mutex_lock(&priv->mutex); - iwl_scan_cancel_timeout(priv, 100); - - /* - * If we are getting WEP group key and we didn't receive any key mapping - * so far, we are in legacy wep mode (group key only), otherwise we are - * in 1X mode. - * In legacy wep mode, we use another host command to the uCode. - */ - if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || - key->cipher == WLAN_CIPHER_SUITE_WEP104) && - !sta) { - if (cmd == SET_KEY) - is_default_wep_key = !ctx->key_mapping_keys; - else - is_default_wep_key = - (key->hw_key_idx == HW_KEY_DEFAULT); - } - - switch (cmd) { - case SET_KEY: - if (is_default_wep_key) - ret = iwl_set_default_wep_key(priv, vif_priv->ctx, key); - else - ret = iwl_set_dynamic_key(priv, vif_priv->ctx, - key, sta_id); - - IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n"); - break; - case DISABLE_KEY: - if (is_default_wep_key) - ret = iwl_remove_default_wep_key(priv, ctx, key); - else - ret = iwl_remove_dynamic_key(priv, ctx, key, sta_id); - - IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n"); - break; - default: - ret = -EINVAL; - } - - mutex_unlock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return ret; -} - -int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - enum ieee80211_ampdu_mlme_action action, - struct ieee80211_sta *sta, u16 tid, u16 *ssn) -{ - struct iwl_priv *priv = hw->priv; - int ret = -EINVAL; - - IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n", - sta->addr, tid); - - if (!(priv->cfg->sku & IWL_SKU_N)) - return -EACCES; - - mutex_lock(&priv->mutex); - - switch (action) { - case IEEE80211_AMPDU_RX_START: - IWL_DEBUG_HT(priv, "start Rx\n"); - ret = iwl_sta_rx_agg_start(priv, sta, tid, *ssn); - break; - case IEEE80211_AMPDU_RX_STOP: - IWL_DEBUG_HT(priv, "stop Rx\n"); - ret = iwl_sta_rx_agg_stop(priv, sta, tid); - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - ret = 0; - break; - case IEEE80211_AMPDU_TX_START: - IWL_DEBUG_HT(priv, "start Tx\n"); - ret = iwlagn_tx_agg_start(priv, vif, sta, tid, ssn); - if (ret == 0) { - priv->_agn.agg_tids_count++; - IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n", - priv->_agn.agg_tids_count); - } - break; - case IEEE80211_AMPDU_TX_STOP: - IWL_DEBUG_HT(priv, "stop Tx\n"); - ret = iwlagn_tx_agg_stop(priv, vif, sta, tid); - if ((ret == 0) && (priv->_agn.agg_tids_count > 0)) { - priv->_agn.agg_tids_count--; - IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n", - priv->_agn.agg_tids_count); - } - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - ret = 0; - if (priv->cfg->ht_params && - priv->cfg->ht_params->use_rts_for_aggregation) { - struct iwl_station_priv *sta_priv = - (void *) sta->drv_priv; - /* - * switch off RTS/CTS if it was previously enabled - */ - - sta_priv->lq_sta.lq.general_params.flags &= - ~LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK; - iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif), - &sta_priv->lq_sta.lq, CMD_ASYNC, false); - } - break; - case IEEE80211_AMPDU_TX_OPERATIONAL: - if (priv->cfg->ht_params && - priv->cfg->ht_params->use_rts_for_aggregation) { - struct iwl_station_priv *sta_priv = - (void *) sta->drv_priv; - - /* - * switch to RTS/CTS if it is the prefer protection - * method for HT traffic - */ - - sta_priv->lq_sta.lq.general_params.flags |= - LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK; - iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif), - &sta_priv->lq_sta.lq, CMD_ASYNC, false); - } - ret = 0; - break; - } - mutex_unlock(&priv->mutex); - - return ret; -} - -int iwlagn_mac_sta_add(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta) -{ - struct iwl_priv *priv = hw->priv; - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - bool is_ap = vif->type == NL80211_IFTYPE_STATION; - int ret; - u8 sta_id; - - IWL_DEBUG_INFO(priv, "received request to add station %pM\n", - sta->addr); - mutex_lock(&priv->mutex); - IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n", - sta->addr); - sta_priv->common.sta_id = IWL_INVALID_STATION; - - atomic_set(&sta_priv->pending_frames, 0); - if (vif->type == NL80211_IFTYPE_AP) - sta_priv->client = true; - - ret = iwl_add_station_common(priv, vif_priv->ctx, sta->addr, - is_ap, sta, &sta_id); - if (ret) { - IWL_ERR(priv, "Unable to add station %pM (%d)\n", - sta->addr, ret); - /* Should we return success if return code is EEXIST ? */ - mutex_unlock(&priv->mutex); - return ret; - } - - sta_priv->common.sta_id = sta_id; - - /* Initialize rate scaling */ - IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n", - sta->addr); - iwl_rs_rate_init(priv, sta, sta_id); - mutex_unlock(&priv->mutex); - - return 0; -} - -void iwlagn_mac_channel_switch(struct ieee80211_hw *hw, - struct ieee80211_channel_switch *ch_switch) -{ - struct iwl_priv *priv = hw->priv; - const struct iwl_channel_info *ch_info; - struct ieee80211_conf *conf = &hw->conf; - struct ieee80211_channel *channel = ch_switch->channel; - struct iwl_ht_config *ht_conf = &priv->current_ht_config; - /* - * MULTI-FIXME - * When we add support for multiple interfaces, we need to - * revisit this. The channel switch command in the device - * only affects the BSS context, but what does that really - * mean? And what if we get a CSA on the second interface? - * This needs a lot of work. - */ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - u16 ch; - unsigned long flags = 0; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (iwl_is_rfkill(priv)) - goto out_exit; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status) || - test_bit(STATUS_SCANNING, &priv->status)) - goto out_exit; - - if (!iwl_is_associated_ctx(ctx)) - goto out_exit; - - /* channel switch in progress */ - if (priv->switch_rxon.switch_in_progress == true) - goto out_exit; - - mutex_lock(&priv->mutex); - if (priv->cfg->ops->lib->set_channel_switch) { - - ch = channel->hw_value; - if (le16_to_cpu(ctx->active.channel) != ch) { - ch_info = iwl_get_channel_info(priv, - channel->band, - ch); - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_MAC80211(priv, "invalid channel\n"); - goto out; - } - spin_lock_irqsave(&priv->lock, flags); - - priv->current_ht_config.smps = conf->smps_mode; - - /* Configure HT40 channels */ - ctx->ht.enabled = conf_is_ht(conf); - if (ctx->ht.enabled) { - if (conf_is_ht40_minus(conf)) { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_BELOW; - ctx->ht.is_40mhz = true; - } else if (conf_is_ht40_plus(conf)) { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_ABOVE; - ctx->ht.is_40mhz = true; - } else { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_NONE; - ctx->ht.is_40mhz = false; - } - } else - ctx->ht.is_40mhz = false; - - if ((le16_to_cpu(ctx->staging.channel) != ch)) - ctx->staging.flags = 0; - - iwl_set_rxon_channel(priv, channel, ctx); - iwl_set_rxon_ht(priv, ht_conf); - iwl_set_flags_for_band(priv, ctx, channel->band, - ctx->vif); - spin_unlock_irqrestore(&priv->lock, flags); - - iwl_set_rate(priv); - /* - * at this point, staging_rxon has the - * configuration for channel switch - */ - if (priv->cfg->ops->lib->set_channel_switch(priv, - ch_switch)) - priv->switch_rxon.switch_in_progress = false; - } - } -out: - mutex_unlock(&priv->mutex); -out_exit: - if (!priv->switch_rxon.switch_in_progress) - ieee80211_chswitch_done(ctx->vif, false); - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -void iwlagn_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - u64 multicast) -{ - struct iwl_priv *priv = hw->priv; - __le32 filter_or = 0, filter_nand = 0; - struct iwl_rxon_context *ctx; - -#define CHK(test, flag) do { \ - if (*total_flags & (test)) \ - filter_or |= (flag); \ - else \ - filter_nand |= (flag); \ - } while (0) - - IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n", - changed_flags, *total_flags); - - CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK); - /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */ - CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK); - CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); - -#undef CHK - - mutex_lock(&priv->mutex); - - for_each_context(priv, ctx) { - ctx->staging.filter_flags &= ~filter_nand; - ctx->staging.filter_flags |= filter_or; - - /* - * Not committing directly because hardware can perform a scan, - * but we'll eventually commit the filter flags change anyway. - */ - } - - mutex_unlock(&priv->mutex); - - /* - * Receiving all multicast frames is always enabled by the - * default flags setup in iwl_connection_init_rx_config() - * since we currently do not support programming multicast - * filters into the device. - */ - *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | - FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; -} - -void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop) -{ - struct iwl_priv *priv = hw->priv; - - mutex_lock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "enter\n"); - - /* do not support "flush" */ - if (!priv->cfg->ops->lib->txfifo_flush) - goto done; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { - IWL_DEBUG_TX(priv, "Aborting flush due to device shutdown\n"); - goto done; - } - if (iwl_is_rfkill(priv)) { - IWL_DEBUG_TX(priv, "Aborting flush due to RF Kill\n"); - goto done; - } - - /* - * mac80211 will not push any more frames for transmit - * until the flush is completed - */ - if (drop) { - IWL_DEBUG_MAC80211(priv, "send flush command\n"); - if (priv->cfg->ops->lib->txfifo_flush(priv, IWL_DROP_ALL)) { - IWL_ERR(priv, "flush request fail\n"); - goto done; - } - } - IWL_DEBUG_MAC80211(priv, "wait transmit/flush all frames\n"); - iwlagn_wait_tx_queue_empty(priv); -done: - mutex_unlock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -/***************************************************************************** - * - * driver setup and teardown - * - *****************************************************************************/ - -static void iwl_setup_deferred_work(struct iwl_priv *priv) -{ - priv->workqueue = create_singlethread_workqueue(DRV_NAME); - - init_waitqueue_head(&priv->wait_command_queue); - - INIT_WORK(&priv->restart, iwl_bg_restart); - INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish); - INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update); - INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work); - INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush); - INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency); - INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config); - INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start); - INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start); - - iwl_setup_scan_deferred_work(priv); - - if (priv->cfg->ops->lib->setup_deferred_work) - priv->cfg->ops->lib->setup_deferred_work(priv); - - init_timer(&priv->statistics_periodic); - priv->statistics_periodic.data = (unsigned long)priv; - priv->statistics_periodic.function = iwl_bg_statistics_periodic; - - init_timer(&priv->ucode_trace); - priv->ucode_trace.data = (unsigned long)priv; - priv->ucode_trace.function = iwl_bg_ucode_trace; - - init_timer(&priv->watchdog); - priv->watchdog.data = (unsigned long)priv; - priv->watchdog.function = iwl_bg_watchdog; - - if (!priv->cfg->base_params->use_isr_legacy) - tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) - iwl_irq_tasklet, (unsigned long)priv); - else - tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) - iwl_irq_tasklet_legacy, (unsigned long)priv); -} - -static void iwl_cancel_deferred_work(struct iwl_priv *priv) -{ - if (priv->cfg->ops->lib->cancel_deferred_work) - priv->cfg->ops->lib->cancel_deferred_work(priv); - - cancel_delayed_work_sync(&priv->init_alive_start); - cancel_delayed_work(&priv->alive_start); - cancel_work_sync(&priv->run_time_calib_work); - cancel_work_sync(&priv->beacon_update); - - iwl_cancel_scan_deferred_work(priv); - - cancel_work_sync(&priv->bt_full_concurrency); - cancel_work_sync(&priv->bt_runtime_config); - - del_timer_sync(&priv->statistics_periodic); - del_timer_sync(&priv->ucode_trace); -} - -static void iwl_init_hw_rates(struct iwl_priv *priv, - struct ieee80211_rate *rates) -{ - int i; - - for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) { - rates[i].bitrate = iwl_rates[i].ieee * 5; - rates[i].hw_value = i; /* Rate scaling will work on indexes */ - rates[i].hw_value_short = i; - rates[i].flags = 0; - if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) { - /* - * If CCK != 1M then set short preamble rate flag. - */ - rates[i].flags |= - (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ? - 0 : IEEE80211_RATE_SHORT_PREAMBLE; - } - } -} - -static int iwl_init_drv(struct iwl_priv *priv) -{ - int ret; - - spin_lock_init(&priv->sta_lock); - spin_lock_init(&priv->hcmd_lock); - - INIT_LIST_HEAD(&priv->free_frames); - - mutex_init(&priv->mutex); - mutex_init(&priv->sync_cmd_mutex); - - priv->ieee_channels = NULL; - priv->ieee_rates = NULL; - priv->band = IEEE80211_BAND_2GHZ; - - priv->iw_mode = NL80211_IFTYPE_STATION; - priv->current_ht_config.smps = IEEE80211_SMPS_STATIC; - priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF; - priv->_agn.agg_tids_count = 0; - - /* initialize force reset */ - priv->force_reset[IWL_RF_RESET].reset_duration = - IWL_DELAY_NEXT_FORCE_RF_RESET; - priv->force_reset[IWL_FW_RESET].reset_duration = - IWL_DELAY_NEXT_FORCE_FW_RELOAD; - - /* Choose which receivers/antennas to use */ - if (priv->cfg->ops->hcmd->set_rxon_chain) - priv->cfg->ops->hcmd->set_rxon_chain(priv, - &priv->contexts[IWL_RXON_CTX_BSS]); - - iwl_init_scan_params(priv); - - /* init bt coex */ - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist) { - priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT; - priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT; - priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK; - priv->bt_on_thresh = BT_ON_THRESHOLD_DEF; - priv->bt_duration = BT_DURATION_LIMIT_DEF; - priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF; - } - - /* Set the tx_power_user_lmt to the lowest power level - * this value will get overwritten by channel max power avg - * from eeprom */ - priv->tx_power_user_lmt = IWLAGN_TX_POWER_TARGET_POWER_MIN; - priv->tx_power_next = IWLAGN_TX_POWER_TARGET_POWER_MIN; - - ret = iwl_init_channel_map(priv); - if (ret) { - IWL_ERR(priv, "initializing regulatory failed: %d\n", ret); - goto err; - } - - ret = iwlcore_init_geos(priv); - if (ret) { - IWL_ERR(priv, "initializing geos failed: %d\n", ret); - goto err_free_channel_map; - } - iwl_init_hw_rates(priv, priv->ieee_rates); - - return 0; - -err_free_channel_map: - iwl_free_channel_map(priv); -err: - return ret; -} - -static void iwl_uninit_drv(struct iwl_priv *priv) -{ - iwl_calib_free_results(priv); - iwlcore_free_geos(priv); - iwl_free_channel_map(priv); - kfree(priv->scan_cmd); -} - -#ifdef CONFIG_IWL5000 -struct ieee80211_ops iwlagn_hw_ops = { - .tx = iwlagn_mac_tx, - .start = iwlagn_mac_start, - .stop = iwlagn_mac_stop, - .add_interface = iwl_mac_add_interface, - .remove_interface = iwl_mac_remove_interface, - .change_interface = iwl_mac_change_interface, - .config = iwlagn_mac_config, - .configure_filter = iwlagn_configure_filter, - .set_key = iwlagn_mac_set_key, - .update_tkip_key = iwlagn_mac_update_tkip_key, - .conf_tx = iwl_mac_conf_tx, - .bss_info_changed = iwlagn_bss_info_changed, - .ampdu_action = iwlagn_mac_ampdu_action, - .hw_scan = iwl_mac_hw_scan, - .sta_notify = iwlagn_mac_sta_notify, - .sta_add = iwlagn_mac_sta_add, - .sta_remove = iwl_mac_sta_remove, - .channel_switch = iwlagn_mac_channel_switch, - .flush = iwlagn_mac_flush, - .tx_last_beacon = iwl_mac_tx_last_beacon, -}; -#endif - -static void iwl_hw_detect(struct iwl_priv *priv) -{ - priv->hw_rev = _iwl_read32(priv, CSR_HW_REV); - priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG); - pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id); - IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", priv->rev_id); -} - -static int iwl_set_hw_params(struct iwl_priv *priv) -{ - priv->hw_params.max_rxq_size = RX_QUEUE_SIZE; - priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; - if (priv->cfg->mod_params->amsdu_size_8K) - priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_8K); - else - priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_4K); - - priv->hw_params.max_beacon_itrvl = IWL_MAX_UCODE_BEACON_INTERVAL; - - if (priv->cfg->mod_params->disable_11n) - priv->cfg->sku &= ~IWL_SKU_N; - - /* Device-specific setup */ - return priv->cfg->ops->lib->set_hw_params(priv); -} - -static const u8 iwlagn_bss_ac_to_fifo[] = { - IWL_TX_FIFO_VO, - IWL_TX_FIFO_VI, - IWL_TX_FIFO_BE, - IWL_TX_FIFO_BK, -}; - -static const u8 iwlagn_bss_ac_to_queue[] = { - 0, 1, 2, 3, -}; - -static const u8 iwlagn_pan_ac_to_fifo[] = { - IWL_TX_FIFO_VO_IPAN, - IWL_TX_FIFO_VI_IPAN, - IWL_TX_FIFO_BE_IPAN, - IWL_TX_FIFO_BK_IPAN, -}; - -static const u8 iwlagn_pan_ac_to_queue[] = { - 7, 6, 5, 4, -}; - -static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - int err = 0, i; - struct iwl_priv *priv; - struct ieee80211_hw *hw; - struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data); - unsigned long flags; - u16 pci_cmd, num_mac; - - /************************ - * 1. Allocating HW data - ************************/ - - /* Disabling hardware scan means that mac80211 will perform scans - * "the hard way", rather than using device's scan. */ - if (cfg->mod_params->disable_hw_scan) { - dev_printk(KERN_DEBUG, &(pdev->dev), - "sw scan support is deprecated\n"); -#ifdef CONFIG_IWL5000 - iwlagn_hw_ops.hw_scan = NULL; -#endif -#ifdef CONFIG_IWL4965 - iwl4965_hw_ops.hw_scan = NULL; -#endif - } - - hw = iwl_alloc_all(cfg); - if (!hw) { - err = -ENOMEM; - goto out; - } - priv = hw->priv; - /* At this point both hw and priv are allocated. */ - - /* - * The default context is always valid, - * more may be discovered when firmware - * is loaded. - */ - priv->valid_contexts = BIT(IWL_RXON_CTX_BSS); - - for (i = 0; i < NUM_IWL_RXON_CTX; i++) - priv->contexts[i].ctxid = i; - - priv->contexts[IWL_RXON_CTX_BSS].always_active = true; - priv->contexts[IWL_RXON_CTX_BSS].is_active = true; - priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON; - priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING; - priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC; - priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM; - priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID; - priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY; - priv->contexts[IWL_RXON_CTX_BSS].ac_to_fifo = iwlagn_bss_ac_to_fifo; - priv->contexts[IWL_RXON_CTX_BSS].ac_to_queue = iwlagn_bss_ac_to_queue; - priv->contexts[IWL_RXON_CTX_BSS].exclusive_interface_modes = - BIT(NL80211_IFTYPE_ADHOC); - priv->contexts[IWL_RXON_CTX_BSS].interface_modes = - BIT(NL80211_IFTYPE_STATION); - priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP; - priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS; - priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS; - priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS; - - priv->contexts[IWL_RXON_CTX_PAN].rxon_cmd = REPLY_WIPAN_RXON; - priv->contexts[IWL_RXON_CTX_PAN].rxon_timing_cmd = REPLY_WIPAN_RXON_TIMING; - priv->contexts[IWL_RXON_CTX_PAN].rxon_assoc_cmd = REPLY_WIPAN_RXON_ASSOC; - priv->contexts[IWL_RXON_CTX_PAN].qos_cmd = REPLY_WIPAN_QOS_PARAM; - priv->contexts[IWL_RXON_CTX_PAN].ap_sta_id = IWL_AP_ID_PAN; - priv->contexts[IWL_RXON_CTX_PAN].wep_key_cmd = REPLY_WIPAN_WEPKEY; - priv->contexts[IWL_RXON_CTX_PAN].bcast_sta_id = IWLAGN_PAN_BCAST_ID; - priv->contexts[IWL_RXON_CTX_PAN].station_flags = STA_FLG_PAN_STATION; - priv->contexts[IWL_RXON_CTX_PAN].ac_to_fifo = iwlagn_pan_ac_to_fifo; - priv->contexts[IWL_RXON_CTX_PAN].ac_to_queue = iwlagn_pan_ac_to_queue; - priv->contexts[IWL_RXON_CTX_PAN].mcast_queue = IWL_IPAN_MCAST_QUEUE; - priv->contexts[IWL_RXON_CTX_PAN].interface_modes = - BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP); - priv->contexts[IWL_RXON_CTX_PAN].ap_devtype = RXON_DEV_TYPE_CP; - priv->contexts[IWL_RXON_CTX_PAN].station_devtype = RXON_DEV_TYPE_2STA; - priv->contexts[IWL_RXON_CTX_PAN].unused_devtype = RXON_DEV_TYPE_P2P; - - BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); - - SET_IEEE80211_DEV(hw, &pdev->dev); - - IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n"); - priv->cfg = cfg; - priv->pci_dev = pdev; - priv->inta_mask = CSR_INI_SET_MASK; - - /* is antenna coupling more than 35dB ? */ - priv->bt_ant_couple_ok = - (iwlagn_ant_coupling > IWL_BT_ANTENNA_COUPLING_THRESHOLD) ? - true : false; - - /* enable/disable bt channel inhibition */ - priv->bt_ch_announce = iwlagn_bt_ch_announce; - IWL_DEBUG_INFO(priv, "BT channel inhibition is %s\n", - (priv->bt_ch_announce) ? "On" : "Off"); - - if (iwl_alloc_traffic_mem(priv)) - IWL_ERR(priv, "Not enough memory to generate traffic log\n"); - - /************************** - * 2. Initializing PCI bus - **************************/ - pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | - PCIE_LINK_STATE_CLKPM); - - if (pci_enable_device(pdev)) { - err = -ENODEV; - goto out_ieee80211_free_hw; - } - - pci_set_master(pdev); - - err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36)); - if (!err) - err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36)); - if (err) { - err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); - if (!err) - err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); - /* both attempts failed: */ - if (err) { - IWL_WARN(priv, "No suitable DMA available.\n"); - goto out_pci_disable_device; - } - } - - err = pci_request_regions(pdev, DRV_NAME); - if (err) - goto out_pci_disable_device; - - pci_set_drvdata(pdev, priv); - - - /*********************** - * 3. Read REV register - ***********************/ - priv->hw_base = pci_iomap(pdev, 0, 0); - if (!priv->hw_base) { - err = -ENODEV; - goto out_pci_release_regions; - } - - IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n", - (unsigned long long) pci_resource_len(pdev, 0)); - IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base); - - /* these spin locks will be used in apm_ops.init and EEPROM access - * we should init now - */ - spin_lock_init(&priv->reg_lock); - spin_lock_init(&priv->lock); - - /* - * stop and reset the on-board processor just in case it is in a - * strange state ... like being left stranded by a primary kernel - * and this is now the kdump kernel trying to start up - */ - iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); - - iwl_hw_detect(priv); - IWL_INFO(priv, "Detected %s, REV=0x%X\n", - priv->cfg->name, priv->hw_rev); - - /* We disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state */ - pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); - - iwl_prepare_card_hw(priv); - if (!priv->hw_ready) { - IWL_WARN(priv, "Failed, HW not ready\n"); - goto out_iounmap; - } - - /***************** - * 4. Read EEPROM - *****************/ - /* Read the EEPROM */ - err = iwl_eeprom_init(priv); - if (err) { - IWL_ERR(priv, "Unable to init EEPROM\n"); - goto out_iounmap; - } - err = iwl_eeprom_check_version(priv); - if (err) - goto out_free_eeprom; - - err = iwl_eeprom_check_sku(priv); - if (err) - goto out_free_eeprom; - - /* extract MAC Address */ - iwl_eeprom_get_mac(priv, priv->addresses[0].addr); - IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr); - priv->hw->wiphy->addresses = priv->addresses; - priv->hw->wiphy->n_addresses = 1; - num_mac = iwl_eeprom_query16(priv, EEPROM_NUM_MAC_ADDRESS); - if (num_mac > 1) { - memcpy(priv->addresses[1].addr, priv->addresses[0].addr, - ETH_ALEN); - priv->addresses[1].addr[5]++; - priv->hw->wiphy->n_addresses++; - } - - /************************ - * 5. Setup HW constants - ************************/ - if (iwl_set_hw_params(priv)) { - IWL_ERR(priv, "failed to set hw parameters\n"); - goto out_free_eeprom; - } - - /******************* - * 6. Setup priv - *******************/ - - err = iwl_init_drv(priv); - if (err) - goto out_free_eeprom; - /* At this point both hw and priv are initialized. */ - - /******************** - * 7. Setup services - ********************/ - spin_lock_irqsave(&priv->lock, flags); - iwl_disable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - pci_enable_msi(priv->pci_dev); - - if (priv->cfg->ops->lib->isr_ops.alloc) - priv->cfg->ops->lib->isr_ops.alloc(priv); - - err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr_ops.isr, - IRQF_SHARED, DRV_NAME, priv); - if (err) { - IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq); - goto out_disable_msi; - } - - iwl_setup_deferred_work(priv); - iwl_setup_rx_handlers(priv); - - /********************************************* - * 8. Enable interrupts and read RFKILL state - *********************************************/ - - /* enable rfkill interrupt: hw bug w/a */ - pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd); - if (pci_cmd & PCI_COMMAND_INTX_DISABLE) { - pci_cmd &= ~PCI_COMMAND_INTX_DISABLE; - pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd); - } - - iwl_enable_rfkill_int(priv); - - /* If platform's RF_KILL switch is NOT set to KILL */ - if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) - clear_bit(STATUS_RF_KILL_HW, &priv->status); - else - set_bit(STATUS_RF_KILL_HW, &priv->status); - - wiphy_rfkill_set_hw_state(priv->hw->wiphy, - test_bit(STATUS_RF_KILL_HW, &priv->status)); - - iwl_power_initialize(priv); - iwl_tt_initialize(priv); - - init_completion(&priv->_agn.firmware_loading_complete); - - err = iwl_request_firmware(priv, true); - if (err) - goto out_destroy_workqueue; - - return 0; - - out_destroy_workqueue: - destroy_workqueue(priv->workqueue); - priv->workqueue = NULL; - free_irq(priv->pci_dev->irq, priv); - if (priv->cfg->ops->lib->isr_ops.free) - priv->cfg->ops->lib->isr_ops.free(priv); - out_disable_msi: - pci_disable_msi(priv->pci_dev); - iwl_uninit_drv(priv); - out_free_eeprom: - iwl_eeprom_free(priv); - out_iounmap: - pci_iounmap(pdev, priv->hw_base); - out_pci_release_regions: - pci_set_drvdata(pdev, NULL); - pci_release_regions(pdev); - out_pci_disable_device: - pci_disable_device(pdev); - out_ieee80211_free_hw: - iwl_free_traffic_mem(priv); - ieee80211_free_hw(priv->hw); - out: - return err; -} - -static void __devexit iwl_pci_remove(struct pci_dev *pdev) -{ - struct iwl_priv *priv = pci_get_drvdata(pdev); - unsigned long flags; - - if (!priv) - return; - - wait_for_completion(&priv->_agn.firmware_loading_complete); - - IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n"); - - iwl_dbgfs_unregister(priv); - sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group); - - /* ieee80211_unregister_hw call wil cause iwl_mac_stop to - * to be called and iwl_down since we are removing the device - * we need to set STATUS_EXIT_PENDING bit. - */ - set_bit(STATUS_EXIT_PENDING, &priv->status); - if (priv->mac80211_registered) { - ieee80211_unregister_hw(priv->hw); - priv->mac80211_registered = 0; - } else { - iwl_down(priv); - } - - /* - * Make sure device is reset to low power before unloading driver. - * This may be redundant with iwl_down(), but there are paths to - * run iwl_down() without calling apm_ops.stop(), and there are - * paths to avoid running iwl_down() at all before leaving driver. - * This (inexpensive) call *makes sure* device is reset. - */ - iwl_apm_stop(priv); - - iwl_tt_exit(priv); - - /* make sure we flush any pending irq or - * tasklet for the driver - */ - spin_lock_irqsave(&priv->lock, flags); - iwl_disable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - iwl_synchronize_irq(priv); - - iwl_dealloc_ucode_pci(priv); - - if (priv->rxq.bd) - iwlagn_rx_queue_free(priv, &priv->rxq); - iwlagn_hw_txq_ctx_free(priv); - - iwl_eeprom_free(priv); - - - /*netif_stop_queue(dev); */ - flush_workqueue(priv->workqueue); - - /* ieee80211_unregister_hw calls iwl_mac_stop, which flushes - * priv->workqueue... so we can't take down the workqueue - * until now... */ - destroy_workqueue(priv->workqueue); - priv->workqueue = NULL; - iwl_free_traffic_mem(priv); - - free_irq(priv->pci_dev->irq, priv); - pci_disable_msi(priv->pci_dev); - pci_iounmap(pdev, priv->hw_base); - pci_release_regions(pdev); - pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); - - iwl_uninit_drv(priv); - - if (priv->cfg->ops->lib->isr_ops.free) - priv->cfg->ops->lib->isr_ops.free(priv); - - dev_kfree_skb(priv->beacon_skb); - - ieee80211_free_hw(priv->hw); -} - - -/***************************************************************************** - * - * driver and module entry point - * - *****************************************************************************/ - -/* Hardware specific file defines the PCI IDs table for that hardware module */ -static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { -#ifdef CONFIG_IWL4965 - {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)}, - {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)}, -#endif /* CONFIG_IWL4965 */ -#ifdef CONFIG_IWL5000 -/* 5100 Series WiFi */ - {IWL_PCI_DEVICE(0x4232, 0x1201, iwl5100_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1301, iwl5100_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1204, iwl5100_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1304, iwl5100_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bgn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bgn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1206, iwl5100_abg_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1306, iwl5100_abg_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1221, iwl5100_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1321, iwl5100_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1224, iwl5100_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1324, iwl5100_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1225, iwl5100_bgn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1325, iwl5100_bgn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1226, iwl5100_abg_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1326, iwl5100_abg_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4237, 0x1211, iwl5100_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4237, 0x1311, iwl5100_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4237, 0x1214, iwl5100_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4237, 0x1314, iwl5100_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4237, 0x1215, iwl5100_bgn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4237, 0x1315, iwl5100_bgn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4237, 0x1216, iwl5100_abg_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4237, 0x1316, iwl5100_abg_cfg)}, /* Half Mini Card */ - -/* 5300 Series WiFi */ - {IWL_PCI_DEVICE(0x4235, 0x1021, iwl5300_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4235, 0x1121, iwl5300_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4235, 0x1024, iwl5300_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4235, 0x1124, iwl5300_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4235, 0x1001, iwl5300_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4235, 0x1101, iwl5300_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4235, 0x1004, iwl5300_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4235, 0x1104, iwl5300_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4236, 0x1011, iwl5300_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4236, 0x1111, iwl5300_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4236, 0x1014, iwl5300_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4236, 0x1114, iwl5300_agn_cfg)}, /* Half Mini Card */ - -/* 5350 Series WiFi/WiMax */ - {IWL_PCI_DEVICE(0x423A, 0x1001, iwl5350_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x423A, 0x1021, iwl5350_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x423B, 0x1011, iwl5350_agn_cfg)}, /* Mini Card */ - -/* 5150 Series Wifi/WiMax */ - {IWL_PCI_DEVICE(0x423C, 0x1201, iwl5150_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x423C, 0x1301, iwl5150_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x423C, 0x1206, iwl5150_abg_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x423C, 0x1306, iwl5150_abg_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x423C, 0x1221, iwl5150_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x423C, 0x1321, iwl5150_agn_cfg)}, /* Half Mini Card */ - - {IWL_PCI_DEVICE(0x423D, 0x1211, iwl5150_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x423D, 0x1311, iwl5150_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x423D, 0x1216, iwl5150_abg_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x423D, 0x1316, iwl5150_abg_cfg)}, /* Half Mini Card */ - -/* 6x00 Series */ - {IWL_PCI_DEVICE(0x422B, 0x1101, iwl6000_3agn_cfg)}, - {IWL_PCI_DEVICE(0x422B, 0x1121, iwl6000_3agn_cfg)}, - {IWL_PCI_DEVICE(0x422C, 0x1301, iwl6000i_2agn_cfg)}, - {IWL_PCI_DEVICE(0x422C, 0x1306, iwl6000i_2abg_cfg)}, - {IWL_PCI_DEVICE(0x422C, 0x1307, iwl6000i_2bg_cfg)}, - {IWL_PCI_DEVICE(0x422C, 0x1321, iwl6000i_2agn_cfg)}, - {IWL_PCI_DEVICE(0x422C, 0x1326, iwl6000i_2abg_cfg)}, - {IWL_PCI_DEVICE(0x4238, 0x1111, iwl6000_3agn_cfg)}, - {IWL_PCI_DEVICE(0x4239, 0x1311, iwl6000i_2agn_cfg)}, - {IWL_PCI_DEVICE(0x4239, 0x1316, iwl6000i_2abg_cfg)}, - -/* 6x05 Series */ - {IWL_PCI_DEVICE(0x0082, 0x1301, iwl6005_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0082, 0x1306, iwl6005_2abg_cfg)}, - {IWL_PCI_DEVICE(0x0082, 0x1307, iwl6005_2bg_cfg)}, - {IWL_PCI_DEVICE(0x0082, 0x1321, iwl6005_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0082, 0x1326, iwl6005_2abg_cfg)}, - {IWL_PCI_DEVICE(0x0085, 0x1311, iwl6005_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0085, 0x1316, iwl6005_2abg_cfg)}, - -/* 6x30 Series */ - {IWL_PCI_DEVICE(0x008A, 0x5305, iwl1030_bgn_cfg)}, - {IWL_PCI_DEVICE(0x008A, 0x5307, iwl1030_bg_cfg)}, - {IWL_PCI_DEVICE(0x008A, 0x5325, iwl1030_bgn_cfg)}, - {IWL_PCI_DEVICE(0x008A, 0x5327, iwl1030_bg_cfg)}, - {IWL_PCI_DEVICE(0x008B, 0x5315, iwl1030_bgn_cfg)}, - {IWL_PCI_DEVICE(0x008B, 0x5317, iwl1030_bg_cfg)}, - {IWL_PCI_DEVICE(0x0090, 0x5211, iwl6030_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0090, 0x5215, iwl6030_2bgn_cfg)}, - {IWL_PCI_DEVICE(0x0090, 0x5216, iwl6030_2abg_cfg)}, - {IWL_PCI_DEVICE(0x0091, 0x5201, iwl6030_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0091, 0x5205, iwl6030_2bgn_cfg)}, - {IWL_PCI_DEVICE(0x0091, 0x5206, iwl6030_2abg_cfg)}, - {IWL_PCI_DEVICE(0x0091, 0x5207, iwl6030_2bg_cfg)}, - {IWL_PCI_DEVICE(0x0091, 0x5221, iwl6030_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0091, 0x5225, iwl6030_2bgn_cfg)}, - {IWL_PCI_DEVICE(0x0091, 0x5226, iwl6030_2abg_cfg)}, - -/* 6x50 WiFi/WiMax Series */ - {IWL_PCI_DEVICE(0x0087, 0x1301, iwl6050_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0087, 0x1306, iwl6050_2abg_cfg)}, - {IWL_PCI_DEVICE(0x0087, 0x1321, iwl6050_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0087, 0x1326, iwl6050_2abg_cfg)}, - {IWL_PCI_DEVICE(0x0089, 0x1311, iwl6050_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0089, 0x1316, iwl6050_2abg_cfg)}, - -/* 6150 WiFi/WiMax Series */ - {IWL_PCI_DEVICE(0x0885, 0x1305, iwl6150_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0885, 0x1306, iwl6150_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0885, 0x1325, iwl6150_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0885, 0x1326, iwl6150_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0886, 0x1315, iwl6150_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0886, 0x1316, iwl6150_bgn_cfg)}, - -/* 1000 Series WiFi */ - {IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0083, 0x1305, iwl1000_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0083, 0x1225, iwl1000_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0083, 0x1325, iwl1000_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0084, 0x1215, iwl1000_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0084, 0x1315, iwl1000_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0083, 0x1206, iwl1000_bg_cfg)}, - {IWL_PCI_DEVICE(0x0083, 0x1306, iwl1000_bg_cfg)}, - {IWL_PCI_DEVICE(0x0083, 0x1226, iwl1000_bg_cfg)}, - {IWL_PCI_DEVICE(0x0083, 0x1326, iwl1000_bg_cfg)}, - {IWL_PCI_DEVICE(0x0084, 0x1216, iwl1000_bg_cfg)}, - {IWL_PCI_DEVICE(0x0084, 0x1316, iwl1000_bg_cfg)}, - -/* 100 Series WiFi */ - {IWL_PCI_DEVICE(0x08AE, 0x1005, iwl100_bgn_cfg)}, - {IWL_PCI_DEVICE(0x08AE, 0x1007, iwl100_bg_cfg)}, - {IWL_PCI_DEVICE(0x08AF, 0x1015, iwl100_bgn_cfg)}, - {IWL_PCI_DEVICE(0x08AF, 0x1017, iwl100_bg_cfg)}, - {IWL_PCI_DEVICE(0x08AE, 0x1025, iwl100_bgn_cfg)}, - {IWL_PCI_DEVICE(0x08AE, 0x1027, iwl100_bg_cfg)}, - -/* 130 Series WiFi */ - {IWL_PCI_DEVICE(0x0896, 0x5005, iwl130_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0896, 0x5007, iwl130_bg_cfg)}, - {IWL_PCI_DEVICE(0x0897, 0x5015, iwl130_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0897, 0x5017, iwl130_bg_cfg)}, - {IWL_PCI_DEVICE(0x0896, 0x5025, iwl130_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0896, 0x5027, iwl130_bg_cfg)}, - -#endif /* CONFIG_IWL5000 */ - - {0} -}; -MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids); - -static struct pci_driver iwl_driver = { - .name = DRV_NAME, - .id_table = iwl_hw_card_ids, - .probe = iwl_pci_probe, - .remove = __devexit_p(iwl_pci_remove), - .driver.pm = IWL_PM_OPS, -}; - -static int __init iwl_init(void) -{ - - int ret; - pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); - pr_info(DRV_COPYRIGHT "\n"); - - ret = iwlagn_rate_control_register(); - if (ret) { - pr_err("Unable to register rate control algorithm: %d\n", ret); - return ret; - } - - ret = pci_register_driver(&iwl_driver); - if (ret) { - pr_err("Unable to initialize PCI module\n"); - goto error_register; - } - - return ret; - -error_register: - iwlagn_rate_control_unregister(); - return ret; -} - -static void __exit iwl_exit(void) -{ - pci_unregister_driver(&iwl_driver); - iwlagn_rate_control_unregister(); -} - -module_exit(iwl_exit); -module_init(iwl_init); - -#ifdef CONFIG_IWLWIFI_DEBUG -module_param_named(debug50, iwl_debug_level, uint, S_IRUGO); -MODULE_PARM_DESC(debug50, "50XX debug output mask (deprecated)"); -module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "debug output mask"); -#endif - -module_param_named(swcrypto50, iwlagn_mod_params.sw_crypto, bool, S_IRUGO); -MODULE_PARM_DESC(swcrypto50, - "using crypto in software (default 0 [hardware]) (deprecated)"); -module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO); -MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])"); -module_param_named(queues_num50, - iwlagn_mod_params.num_of_queues, int, S_IRUGO); -MODULE_PARM_DESC(queues_num50, - "number of hw queues in 50xx series (deprecated)"); -module_param_named(queues_num, iwlagn_mod_params.num_of_queues, int, S_IRUGO); -MODULE_PARM_DESC(queues_num, "number of hw queues."); -module_param_named(11n_disable50, iwlagn_mod_params.disable_11n, int, S_IRUGO); -MODULE_PARM_DESC(11n_disable50, "disable 50XX 11n functionality (deprecated)"); -module_param_named(11n_disable, iwlagn_mod_params.disable_11n, int, S_IRUGO); -MODULE_PARM_DESC(11n_disable, "disable 11n functionality"); -module_param_named(amsdu_size_8K50, iwlagn_mod_params.amsdu_size_8K, - int, S_IRUGO); -MODULE_PARM_DESC(amsdu_size_8K50, - "enable 8K amsdu size in 50XX series (deprecated)"); -module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K, - int, S_IRUGO); -MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size"); -module_param_named(fw_restart50, iwlagn_mod_params.restart_fw, int, S_IRUGO); -MODULE_PARM_DESC(fw_restart50, - "restart firmware in case of error (deprecated)"); -module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO); -MODULE_PARM_DESC(fw_restart, "restart firmware in case of error"); -module_param_named( - disable_hw_scan, iwlagn_mod_params.disable_hw_scan, int, S_IRUGO); -MODULE_PARM_DESC(disable_hw_scan, - "disable hardware scanning (default 0) (deprecated)"); - -module_param_named(ucode_alternative, iwlagn_wanted_ucode_alternative, int, - S_IRUGO); -MODULE_PARM_DESC(ucode_alternative, - "specify ucode alternative to use from ucode file"); - -module_param_named(antenna_coupling, iwlagn_ant_coupling, int, S_IRUGO); -MODULE_PARM_DESC(antenna_coupling, - "specify antenna coupling in dB (defualt: 0 dB)"); - -module_param_named(bt_ch_inhibition, iwlagn_bt_ch_announce, bool, S_IRUGO); -MODULE_PARM_DESC(bt_ch_inhibition, - "Disable BT channel inhibition (default: enable)"); |