diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-agn.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-agn.c | 3553 |
1 files changed, 0 insertions, 3553 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c deleted file mode 100644 index ccba69b7f8a..00000000000 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ /dev/null @@ -1,3553 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/dma-mapping.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/firmware.h> -#include <linux/etherdevice.h> -#include <linux/if_arp.h> - -#include <net/mac80211.h> - -#include <asm/div64.h> - -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-agn-calib.h" -#include "iwl-agn.h" -#include "iwl-shared.h" -#include "iwl-bus.h" -#include "iwl-trans.h" - -/****************************************************************************** - * - * module boiler plate - * - ******************************************************************************/ - -/* - * module name, copyright, version, etc. - */ -#define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux" - -#ifdef CONFIG_IWLWIFI_DEBUG -#define VD "d" -#else -#define VD -#endif - -#define DRV_VERSION IWLWIFI_VERSION VD - - -MODULE_DESCRIPTION(DRV_DESCRIPTION); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("iwlagn"); - -void iwl_update_chain_flags(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx; - - for_each_context(priv, ctx) { - iwlagn_set_rxon_chain(priv, ctx); - if (ctx->active.rx_chain != ctx->staging.rx_chain) - iwlagn_commit_rxon(priv, ctx); - } -} - -/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */ -static void iwl_set_beacon_tim(struct iwl_priv *priv, - struct iwl_tx_beacon_cmd *tx_beacon_cmd, - u8 *beacon, u32 frame_size) -{ - u16 tim_idx; - struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon; - - /* - * The index is relative to frame start but we start looking at the - * variable-length part of the beacon. - */ - tim_idx = mgmt->u.beacon.variable - beacon; - - /* Parse variable-length elements of beacon to find WLAN_EID_TIM */ - while ((tim_idx < (frame_size - 2)) && - (beacon[tim_idx] != WLAN_EID_TIM)) - tim_idx += beacon[tim_idx+1] + 2; - - /* If TIM field was found, set variables */ - if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) { - tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx); - tx_beacon_cmd->tim_size = beacon[tim_idx+1]; - } else - IWL_WARN(priv, "Unable to find TIM Element in beacon\n"); -} - -int iwlagn_send_beacon_cmd(struct iwl_priv *priv) -{ - struct iwl_tx_beacon_cmd *tx_beacon_cmd; - struct iwl_host_cmd cmd = { - .id = REPLY_TX_BEACON, - .flags = CMD_SYNC, - }; - struct ieee80211_tx_info *info; - u32 frame_size; - u32 rate_flags; - u32 rate; - - /* - * We have to set up the TX command, the TX Beacon command, and the - * beacon contents. - */ - - lockdep_assert_held(&priv->shrd->mutex); - - if (!priv->beacon_ctx) { - IWL_ERR(priv, "trying to build beacon w/o beacon context!\n"); - return 0; - } - - if (WARN_ON(!priv->beacon_skb)) - return -EINVAL; - - /* Allocate beacon command */ - if (!priv->beacon_cmd) - priv->beacon_cmd = kzalloc(sizeof(*tx_beacon_cmd), GFP_KERNEL); - tx_beacon_cmd = priv->beacon_cmd; - if (!tx_beacon_cmd) - return -ENOMEM; - - frame_size = priv->beacon_skb->len; - - /* Set up TX command fields */ - tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); - tx_beacon_cmd->tx.sta_id = priv->beacon_ctx->bcast_sta_id; - tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK | - TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK; - - /* Set up TX beacon command fields */ - iwl_set_beacon_tim(priv, tx_beacon_cmd, priv->beacon_skb->data, - frame_size); - - /* Set up packet rate and flags */ - info = IEEE80211_SKB_CB(priv->beacon_skb); - - /* - * Let's set up the rate at least somewhat correctly; - * it will currently not actually be used by the uCode, - * it uses the broadcast station's rate instead. - */ - if (info->control.rates[0].idx < 0 || - info->control.rates[0].flags & IEEE80211_TX_RC_MCS) - rate = 0; - else - rate = info->control.rates[0].idx; - - priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant, - hw_params(priv).valid_tx_ant); - rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant); - - /* In mac80211, rates for 5 GHz start at 0 */ - if (info->band == IEEE80211_BAND_5GHZ) - rate += IWL_FIRST_OFDM_RATE; - else if (rate >= IWL_FIRST_CCK_RATE && rate <= IWL_LAST_CCK_RATE) - rate_flags |= RATE_MCS_CCK_MSK; - - tx_beacon_cmd->tx.rate_n_flags = - iwl_hw_set_rate_n_flags(rate, rate_flags); - - /* Submit command */ - cmd.len[0] = sizeof(*tx_beacon_cmd); - cmd.data[0] = tx_beacon_cmd; - cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY; - cmd.len[1] = frame_size; - cmd.data[1] = priv->beacon_skb->data; - cmd.dataflags[1] = IWL_HCMD_DFL_NOCOPY; - - return iwl_trans_send_cmd(trans(priv), &cmd); -} - -static void iwl_bg_beacon_update(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, beacon_update); - struct sk_buff *beacon; - - mutex_lock(&priv->shrd->mutex); - if (!priv->beacon_ctx) { - IWL_ERR(priv, "updating beacon w/o beacon context!\n"); - goto out; - } - - if (priv->beacon_ctx->vif->type != NL80211_IFTYPE_AP) { - /* - * The ucode will send beacon notifications even in - * IBSS mode, but we don't want to process them. But - * we need to defer the type check to here due to - * requiring locking around the beacon_ctx access. - */ - goto out; - } - - /* Pull updated AP beacon from mac80211. will fail if not in AP mode */ - beacon = ieee80211_beacon_get(priv->hw, priv->beacon_ctx->vif); - if (!beacon) { - IWL_ERR(priv, "update beacon failed -- keeping old\n"); - goto out; - } - - /* new beacon skb is allocated every time; dispose previous.*/ - dev_kfree_skb(priv->beacon_skb); - - priv->beacon_skb = beacon; - - iwlagn_send_beacon_cmd(priv); - out: - mutex_unlock(&priv->shrd->mutex); -} - -static void iwl_bg_bt_runtime_config(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, bt_runtime_config); - - if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status)) - return; - - /* dont send host command if rf-kill is on */ - if (!iwl_is_ready_rf(priv->shrd)) - return; - iwlagn_send_advance_bt_config(priv); -} - -static void iwl_bg_bt_full_concurrency(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, bt_full_concurrency); - struct iwl_rxon_context *ctx; - - mutex_lock(&priv->shrd->mutex); - - if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status)) - goto out; - - /* dont send host command if rf-kill is on */ - if (!iwl_is_ready_rf(priv->shrd)) - goto out; - - IWL_DEBUG_INFO(priv, "BT coex in %s mode\n", - priv->bt_full_concurrent ? - "full concurrency" : "3-wire"); - - /* - * LQ & RXON updated cmds must be sent before BT Config cmd - * to avoid 3-wire collisions - */ - for_each_context(priv, ctx) { - iwlagn_set_rxon_chain(priv, ctx); - iwlagn_commit_rxon(priv, ctx); - } - - iwlagn_send_advance_bt_config(priv); -out: - mutex_unlock(&priv->shrd->mutex); -} - -/** - * iwl_bg_statistics_periodic - Timer callback to queue statistics - * - * This callback is provided in order to send a statistics request. - * - * This timer function is continually reset to execute within - * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION - * was received. We need to ensure we receive the statistics in order - * to update the temperature used for calibrating the TXPOWER. - */ -static void iwl_bg_statistics_periodic(unsigned long data) -{ - struct iwl_priv *priv = (struct iwl_priv *)data; - - if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status)) - return; - - /* dont send host command if rf-kill is on */ - if (!iwl_is_ready_rf(priv->shrd)) - return; - - iwl_send_statistics_request(priv, CMD_ASYNC, false); -} - - -static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base, - u32 start_idx, u32 num_events, - u32 mode) -{ - u32 i; - u32 ptr; /* SRAM byte address of log data */ - u32 ev, time, data; /* event log data */ - unsigned long reg_flags; - - if (mode == 0) - ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32)); - else - ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32)); - - /* Make sure device is powered up for SRAM reads */ - spin_lock_irqsave(&bus(priv)->reg_lock, reg_flags); - if (iwl_grab_nic_access(bus(priv))) { - spin_unlock_irqrestore(&bus(priv)->reg_lock, reg_flags); - return; - } - - /* Set starting address; reads will auto-increment */ - iwl_write32(bus(priv), HBUS_TARG_MEM_RADDR, ptr); - rmb(); - - /* - * "time" is actually "data" for mode 0 (no timestamp). - * place event id # at far right for easier visual parsing. - */ - for (i = 0; i < num_events; i++) { - ev = iwl_read32(bus(priv), HBUS_TARG_MEM_RDAT); - time = iwl_read32(bus(priv), HBUS_TARG_MEM_RDAT); - if (mode == 0) { - trace_iwlwifi_dev_ucode_cont_event(priv, - 0, time, ev); - } else { - data = iwl_read32(bus(priv), HBUS_TARG_MEM_RDAT); - trace_iwlwifi_dev_ucode_cont_event(priv, - time, data, ev); - } - } - /* Allow device to power down */ - iwl_release_nic_access(bus(priv)); - spin_unlock_irqrestore(&bus(priv)->reg_lock, reg_flags); -} - -static void iwl_continuous_event_trace(struct iwl_priv *priv) -{ - u32 capacity; /* event log capacity in # entries */ - u32 base; /* SRAM byte address of event log header */ - u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ - u32 num_wraps; /* # times uCode wrapped to top of log */ - u32 next_entry; /* index of next entry to be written by uCode */ - - base = priv->device_pointers.error_event_table; - if (iwlagn_hw_valid_rtc_data_addr(base)) { - capacity = iwl_read_targ_mem(bus(priv), base); - num_wraps = iwl_read_targ_mem(bus(priv), - base + (2 * sizeof(u32))); - mode = iwl_read_targ_mem(bus(priv), base + (1 * sizeof(u32))); - next_entry = iwl_read_targ_mem(bus(priv), - base + (3 * sizeof(u32))); - } else - return; - - if (num_wraps == priv->event_log.num_wraps) { - iwl_print_cont_event_trace(priv, - base, priv->event_log.next_entry, - next_entry - priv->event_log.next_entry, - mode); - priv->event_log.non_wraps_count++; - } else { - if ((num_wraps - priv->event_log.num_wraps) > 1) - priv->event_log.wraps_more_count++; - else - priv->event_log.wraps_once_count++; - trace_iwlwifi_dev_ucode_wrap_event(priv, - num_wraps - priv->event_log.num_wraps, - next_entry, priv->event_log.next_entry); - if (next_entry < priv->event_log.next_entry) { - iwl_print_cont_event_trace(priv, base, - priv->event_log.next_entry, - capacity - priv->event_log.next_entry, - mode); - - iwl_print_cont_event_trace(priv, base, 0, - next_entry, mode); - } else { - iwl_print_cont_event_trace(priv, base, - next_entry, capacity - next_entry, - mode); - - iwl_print_cont_event_trace(priv, base, 0, - next_entry, mode); - } - } - priv->event_log.num_wraps = num_wraps; - priv->event_log.next_entry = next_entry; -} - -/** - * iwl_bg_ucode_trace - Timer callback to log ucode event - * - * The timer is continually set to execute every - * UCODE_TRACE_PERIOD milliseconds after the last timer expired - * this function is to perform continuous uCode event logging operation - * if enabled - */ -static void iwl_bg_ucode_trace(unsigned long data) -{ - struct iwl_priv *priv = (struct iwl_priv *)data; - - if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status)) - return; - - if (priv->event_log.ucode_trace) { - iwl_continuous_event_trace(priv); - /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */ - mod_timer(&priv->ucode_trace, - jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD)); - } -} - -static void iwl_bg_tx_flush(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, tx_flush); - - if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status)) - return; - - /* do nothing if rf-kill is on */ - if (!iwl_is_ready_rf(priv->shrd)) - return; - - IWL_DEBUG_INFO(priv, "device request: flush all tx frames\n"); - iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL); -} - -/****************************************************************************** - * - * uCode download functions - * - ******************************************************************************/ - -static void iwl_free_fw_desc(struct iwl_priv *priv, struct fw_desc *desc) -{ - if (desc->v_addr) - dma_free_coherent(bus(priv)->dev, desc->len, - desc->v_addr, desc->p_addr); - desc->v_addr = NULL; - desc->len = 0; -} - -static void iwl_free_fw_img(struct iwl_priv *priv, struct fw_img *img) -{ - iwl_free_fw_desc(priv, &img->code); - iwl_free_fw_desc(priv, &img->data); -} - -static void iwl_dealloc_ucode(struct iwl_priv *priv) -{ - iwl_free_fw_img(priv, &priv->ucode_rt); - iwl_free_fw_img(priv, &priv->ucode_init); - iwl_free_fw_img(priv, &priv->ucode_wowlan); -} - -static int iwl_alloc_fw_desc(struct iwl_priv *priv, struct fw_desc *desc, - const void *data, size_t len) -{ - if (!len) { - desc->v_addr = NULL; - return -EINVAL; - } - - desc->v_addr = dma_alloc_coherent(bus(priv)->dev, len, - &desc->p_addr, GFP_KERNEL); - if (!desc->v_addr) - return -ENOMEM; - - desc->len = len; - memcpy(desc->v_addr, data, len); - return 0; -} - -static void iwl_init_context(struct iwl_priv *priv, u32 ucode_flags) -{ - int i; - - /* - * The default context is always valid, - * the PAN context depends on uCode. - */ - priv->shrd->valid_contexts = BIT(IWL_RXON_CTX_BSS); - if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN) - priv->shrd->valid_contexts |= BIT(IWL_RXON_CTX_PAN); - - for (i = 0; i < NUM_IWL_RXON_CTX; i++) - priv->contexts[i].ctxid = i; - - priv->contexts[IWL_RXON_CTX_BSS].always_active = true; - priv->contexts[IWL_RXON_CTX_BSS].is_active = true; - priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON; - priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING; - priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC; - priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM; - priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID; - priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY; - priv->contexts[IWL_RXON_CTX_BSS].exclusive_interface_modes = - BIT(NL80211_IFTYPE_ADHOC); - priv->contexts[IWL_RXON_CTX_BSS].interface_modes = - BIT(NL80211_IFTYPE_STATION); - priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP; - priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS; - priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS; - priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS; - - priv->contexts[IWL_RXON_CTX_PAN].rxon_cmd = REPLY_WIPAN_RXON; - priv->contexts[IWL_RXON_CTX_PAN].rxon_timing_cmd = - REPLY_WIPAN_RXON_TIMING; - priv->contexts[IWL_RXON_CTX_PAN].rxon_assoc_cmd = - REPLY_WIPAN_RXON_ASSOC; - priv->contexts[IWL_RXON_CTX_PAN].qos_cmd = REPLY_WIPAN_QOS_PARAM; - priv->contexts[IWL_RXON_CTX_PAN].ap_sta_id = IWL_AP_ID_PAN; - priv->contexts[IWL_RXON_CTX_PAN].wep_key_cmd = REPLY_WIPAN_WEPKEY; - priv->contexts[IWL_RXON_CTX_PAN].bcast_sta_id = IWLAGN_PAN_BCAST_ID; - priv->contexts[IWL_RXON_CTX_PAN].station_flags = STA_FLG_PAN_STATION; - priv->contexts[IWL_RXON_CTX_PAN].interface_modes = - BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP); - - if (ucode_flags & IWL_UCODE_TLV_FLAGS_P2P) - priv->contexts[IWL_RXON_CTX_PAN].interface_modes |= - BIT(NL80211_IFTYPE_P2P_CLIENT) | - BIT(NL80211_IFTYPE_P2P_GO); - - priv->contexts[IWL_RXON_CTX_PAN].ap_devtype = RXON_DEV_TYPE_CP; - priv->contexts[IWL_RXON_CTX_PAN].station_devtype = RXON_DEV_TYPE_2STA; - priv->contexts[IWL_RXON_CTX_PAN].unused_devtype = RXON_DEV_TYPE_P2P; - - BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); -} - - -struct iwlagn_ucode_capabilities { - u32 max_probe_length; - u32 standard_phy_calibration_size; - u32 flags; -}; - -static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context); -static int iwlagn_mac_setup_register(struct iwl_priv *priv, - struct iwlagn_ucode_capabilities *capa); - -#define UCODE_EXPERIMENTAL_INDEX 100 -#define UCODE_EXPERIMENTAL_TAG "exp" - -static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first) -{ - const char *name_pre = priv->cfg->fw_name_pre; - char tag[8]; - - if (first) { -#ifdef CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE - priv->fw_index = UCODE_EXPERIMENTAL_INDEX; - strcpy(tag, UCODE_EXPERIMENTAL_TAG); - } else if (priv->fw_index == UCODE_EXPERIMENTAL_INDEX) { -#endif - priv->fw_index = priv->cfg->ucode_api_max; - sprintf(tag, "%d", priv->fw_index); - } else { - priv->fw_index--; - sprintf(tag, "%d", priv->fw_index); - } - - if (priv->fw_index < priv->cfg->ucode_api_min) { - IWL_ERR(priv, "no suitable firmware found!\n"); - return -ENOENT; - } - - sprintf(priv->firmware_name, "%s%s%s", name_pre, tag, ".ucode"); - - IWL_DEBUG_INFO(priv, "attempting to load firmware %s'%s'\n", - (priv->fw_index == UCODE_EXPERIMENTAL_INDEX) - ? "EXPERIMENTAL " : "", - priv->firmware_name); - - return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name, - bus(priv)->dev, - GFP_KERNEL, priv, iwl_ucode_callback); -} - -struct iwlagn_firmware_pieces { - const void *inst, *data, *init, *init_data, *wowlan_inst, *wowlan_data; - size_t inst_size, data_size, init_size, init_data_size, - wowlan_inst_size, wowlan_data_size; - - u32 build; - - u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr; - u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr; -}; - -static int iwlagn_load_legacy_firmware(struct iwl_priv *priv, - const struct firmware *ucode_raw, - struct iwlagn_firmware_pieces *pieces) -{ - struct iwl_ucode_header *ucode = (void *)ucode_raw->data; - u32 api_ver, hdr_size; - const u8 *src; - - priv->ucode_ver = le32_to_cpu(ucode->ver); - api_ver = IWL_UCODE_API(priv->ucode_ver); - - switch (api_ver) { - default: - hdr_size = 28; - if (ucode_raw->size < hdr_size) { - IWL_ERR(priv, "File size too small!\n"); - return -EINVAL; - } - pieces->build = le32_to_cpu(ucode->u.v2.build); - pieces->inst_size = le32_to_cpu(ucode->u.v2.inst_size); - pieces->data_size = le32_to_cpu(ucode->u.v2.data_size); - pieces->init_size = le32_to_cpu(ucode->u.v2.init_size); - pieces->init_data_size = le32_to_cpu(ucode->u.v2.init_data_size); - src = ucode->u.v2.data; - break; - case 0: - case 1: - case 2: - hdr_size = 24; - if (ucode_raw->size < hdr_size) { - IWL_ERR(priv, "File size too small!\n"); - return -EINVAL; - } - pieces->build = 0; - pieces->inst_size = le32_to_cpu(ucode->u.v1.inst_size); - pieces->data_size = le32_to_cpu(ucode->u.v1.data_size); - pieces->init_size = le32_to_cpu(ucode->u.v1.init_size); - pieces->init_data_size = le32_to_cpu(ucode->u.v1.init_data_size); - src = ucode->u.v1.data; - break; - } - - /* Verify size of file vs. image size info in file's header */ - if (ucode_raw->size != hdr_size + pieces->inst_size + - pieces->data_size + pieces->init_size + - pieces->init_data_size) { - - IWL_ERR(priv, - "uCode file size %d does not match expected size\n", - (int)ucode_raw->size); - return -EINVAL; - } - - pieces->inst = src; - src += pieces->inst_size; - pieces->data = src; - src += pieces->data_size; - pieces->init = src; - src += pieces->init_size; - pieces->init_data = src; - src += pieces->init_data_size; - - return 0; -} - -static int iwlagn_load_firmware(struct iwl_priv *priv, - const struct firmware *ucode_raw, - struct iwlagn_firmware_pieces *pieces, - struct iwlagn_ucode_capabilities *capa) -{ - struct iwl_tlv_ucode_header *ucode = (void *)ucode_raw->data; - struct iwl_ucode_tlv *tlv; - size_t len = ucode_raw->size; - const u8 *data; - int wanted_alternative = iwlagn_mod_params.wanted_ucode_alternative; - int tmp; - u64 alternatives; - u32 tlv_len; - enum iwl_ucode_tlv_type tlv_type; - const u8 *tlv_data; - - if (len < sizeof(*ucode)) { - IWL_ERR(priv, "uCode has invalid length: %zd\n", len); - return -EINVAL; - } - - if (ucode->magic != cpu_to_le32(IWL_TLV_UCODE_MAGIC)) { - IWL_ERR(priv, "invalid uCode magic: 0X%x\n", - le32_to_cpu(ucode->magic)); - return -EINVAL; - } - - /* - * Check which alternatives are present, and "downgrade" - * when the chosen alternative is not present, warning - * the user when that happens. Some files may not have - * any alternatives, so don't warn in that case. - */ - alternatives = le64_to_cpu(ucode->alternatives); - tmp = wanted_alternative; - if (wanted_alternative > 63) - wanted_alternative = 63; - while (wanted_alternative && !(alternatives & BIT(wanted_alternative))) - wanted_alternative--; - if (wanted_alternative && wanted_alternative != tmp) - IWL_WARN(priv, - "uCode alternative %d not available, choosing %d\n", - tmp, wanted_alternative); - - priv->ucode_ver = le32_to_cpu(ucode->ver); - pieces->build = le32_to_cpu(ucode->build); - data = ucode->data; - - len -= sizeof(*ucode); - - while (len >= sizeof(*tlv)) { - u16 tlv_alt; - - len -= sizeof(*tlv); - tlv = (void *)data; - - tlv_len = le32_to_cpu(tlv->length); - tlv_type = le16_to_cpu(tlv->type); - tlv_alt = le16_to_cpu(tlv->alternative); - tlv_data = tlv->data; - - if (len < tlv_len) { - IWL_ERR(priv, "invalid TLV len: %zd/%u\n", - len, tlv_len); - return -EINVAL; - } - len -= ALIGN(tlv_len, 4); - data += sizeof(*tlv) + ALIGN(tlv_len, 4); - - /* - * Alternative 0 is always valid. - * - * Skip alternative TLVs that are not selected. - */ - if (tlv_alt != 0 && tlv_alt != wanted_alternative) - continue; - - switch (tlv_type) { - case IWL_UCODE_TLV_INST: - pieces->inst = tlv_data; - pieces->inst_size = tlv_len; - break; - case IWL_UCODE_TLV_DATA: - pieces->data = tlv_data; - pieces->data_size = tlv_len; - break; - case IWL_UCODE_TLV_INIT: - pieces->init = tlv_data; - pieces->init_size = tlv_len; - break; - case IWL_UCODE_TLV_INIT_DATA: - pieces->init_data = tlv_data; - pieces->init_data_size = tlv_len; - break; - case IWL_UCODE_TLV_BOOT: - IWL_ERR(priv, "Found unexpected BOOT ucode\n"); - break; - case IWL_UCODE_TLV_PROBE_MAX_LEN: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - capa->max_probe_length = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_PAN: - if (tlv_len) - goto invalid_tlv_len; - capa->flags |= IWL_UCODE_TLV_FLAGS_PAN; - break; - case IWL_UCODE_TLV_FLAGS: - /* must be at least one u32 */ - if (tlv_len < sizeof(u32)) - goto invalid_tlv_len; - /* and a proper number of u32s */ - if (tlv_len % sizeof(u32)) - goto invalid_tlv_len; - /* - * This driver only reads the first u32 as - * right now no more features are defined, - * if that changes then either the driver - * will not work with the new firmware, or - * it'll not take advantage of new features. - */ - capa->flags = le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_INIT_EVTLOG_PTR: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->init_evtlog_ptr = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_INIT_EVTLOG_SIZE: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->init_evtlog_size = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_INIT_ERRLOG_PTR: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->init_errlog_ptr = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_RUNT_EVTLOG_PTR: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->inst_evtlog_ptr = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_RUNT_EVTLOG_SIZE: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->inst_evtlog_size = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_RUNT_ERRLOG_PTR: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->inst_errlog_ptr = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_ENHANCE_SENS_TBL: - if (tlv_len) - goto invalid_tlv_len; - priv->enhance_sensitivity_table = true; - break; - case IWL_UCODE_TLV_WOWLAN_INST: - pieces->wowlan_inst = tlv_data; - pieces->wowlan_inst_size = tlv_len; - break; - case IWL_UCODE_TLV_WOWLAN_DATA: - pieces->wowlan_data = tlv_data; - pieces->wowlan_data_size = tlv_len; - break; - case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - capa->standard_phy_calibration_size = - le32_to_cpup((__le32 *)tlv_data); - break; - default: - IWL_DEBUG_INFO(priv, "unknown TLV: %d\n", tlv_type); - break; - } - } - - if (len) { - IWL_ERR(priv, "invalid TLV after parsing: %zd\n", len); - iwl_print_hex_dump(priv, IWL_DL_FW, (u8 *)data, len); - return -EINVAL; - } - - return 0; - - invalid_tlv_len: - IWL_ERR(priv, "TLV %d has invalid size: %u\n", tlv_type, tlv_len); - iwl_print_hex_dump(priv, IWL_DL_FW, tlv_data, tlv_len); - - return -EINVAL; -} - -/** - * iwl_ucode_callback - callback when firmware was loaded - * - * If loaded successfully, copies the firmware into buffers - * for the card to fetch (via DMA). - */ -static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context) -{ - struct iwl_priv *priv = context; - struct iwl_ucode_header *ucode; - int err; - struct iwlagn_firmware_pieces pieces; - const unsigned int api_max = priv->cfg->ucode_api_max; - unsigned int api_ok = priv->cfg->ucode_api_ok; - const unsigned int api_min = priv->cfg->ucode_api_min; - u32 api_ver; - char buildstr[25]; - u32 build; - struct iwlagn_ucode_capabilities ucode_capa = { - .max_probe_length = 200, - .standard_phy_calibration_size = - IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE, - }; - - if (!api_ok) - api_ok = api_max; - - memset(&pieces, 0, sizeof(pieces)); - - if (!ucode_raw) { - if (priv->fw_index <= api_ok) - IWL_ERR(priv, - "request for firmware file '%s' failed.\n", - priv->firmware_name); - goto try_again; - } - - IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n", - priv->firmware_name, ucode_raw->size); - - /* Make sure that we got at least the API version number */ - if (ucode_raw->size < 4) { - IWL_ERR(priv, "File size way too small!\n"); - goto try_again; - } - - /* Data from ucode file: header followed by uCode images */ - ucode = (struct iwl_ucode_header *)ucode_raw->data; - - if (ucode->ver) - err = iwlagn_load_legacy_firmware(priv, ucode_raw, &pieces); - else - err = iwlagn_load_firmware(priv, ucode_raw, &pieces, - &ucode_capa); - - if (err) - goto try_again; - - api_ver = IWL_UCODE_API(priv->ucode_ver); - build = pieces.build; - - /* - * api_ver should match the api version forming part of the - * firmware filename ... but we don't check for that and only rely - * on the API version read from firmware header from here on forward - */ - /* no api version check required for experimental uCode */ - if (priv->fw_index != UCODE_EXPERIMENTAL_INDEX) { - if (api_ver < api_min || api_ver > api_max) { - IWL_ERR(priv, - "Driver unable to support your firmware API. " - "Driver supports v%u, firmware is v%u.\n", - api_max, api_ver); - goto try_again; - } - - if (api_ver < api_ok) { - if (api_ok != api_max) - IWL_ERR(priv, "Firmware has old API version, " - "expected v%u through v%u, got v%u.\n", - api_ok, api_max, api_ver); - else - IWL_ERR(priv, "Firmware has old API version, " - "expected v%u, got v%u.\n", - api_max, api_ver); - IWL_ERR(priv, "New firmware can be obtained from " - "http://www.intellinuxwireless.org/.\n"); - } - } - - if (build) - sprintf(buildstr, " build %u%s", build, - (priv->fw_index == UCODE_EXPERIMENTAL_INDEX) - ? " (EXP)" : ""); - else - buildstr[0] = '\0'; - - IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u%s\n", - IWL_UCODE_MAJOR(priv->ucode_ver), - IWL_UCODE_MINOR(priv->ucode_ver), - IWL_UCODE_API(priv->ucode_ver), - IWL_UCODE_SERIAL(priv->ucode_ver), - buildstr); - - snprintf(priv->hw->wiphy->fw_version, - sizeof(priv->hw->wiphy->fw_version), - "%u.%u.%u.%u%s", - IWL_UCODE_MAJOR(priv->ucode_ver), - IWL_UCODE_MINOR(priv->ucode_ver), - IWL_UCODE_API(priv->ucode_ver), - IWL_UCODE_SERIAL(priv->ucode_ver), - buildstr); - - /* - * For any of the failures below (before allocating pci memory) - * we will try to load a version with a smaller API -- maybe the - * user just got a corrupted version of the latest API. - */ - - IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n", - priv->ucode_ver); - IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %Zd\n", - pieces.inst_size); - IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %Zd\n", - pieces.data_size); - IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %Zd\n", - pieces.init_size); - IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %Zd\n", - pieces.init_data_size); - - /* Verify that uCode images will fit in card's SRAM */ - if (pieces.inst_size > hw_params(priv).max_inst_size) { - IWL_ERR(priv, "uCode instr len %Zd too large to fit in\n", - pieces.inst_size); - goto try_again; - } - - if (pieces.data_size > hw_params(priv).max_data_size) { - IWL_ERR(priv, "uCode data len %Zd too large to fit in\n", - pieces.data_size); - goto try_again; - } - - if (pieces.init_size > hw_params(priv).max_inst_size) { - IWL_ERR(priv, "uCode init instr len %Zd too large to fit in\n", - pieces.init_size); - goto try_again; - } - - if (pieces.init_data_size > hw_params(priv).max_data_size) { - IWL_ERR(priv, "uCode init data len %Zd too large to fit in\n", - pieces.init_data_size); - goto try_again; - } - - /* Allocate ucode buffers for card's bus-master loading ... */ - - /* Runtime instructions and 2 copies of data: - * 1) unmodified from disk - * 2) backup cache for save/restore during power-downs */ - if (iwl_alloc_fw_desc(priv, &priv->ucode_rt.code, - pieces.inst, pieces.inst_size)) - goto err_pci_alloc; - if (iwl_alloc_fw_desc(priv, &priv->ucode_rt.data, - pieces.data, pieces.data_size)) - goto err_pci_alloc; - - /* Initialization instructions and data */ - if (pieces.init_size && pieces.init_data_size) { - if (iwl_alloc_fw_desc(priv, &priv->ucode_init.code, - pieces.init, pieces.init_size)) - goto err_pci_alloc; - if (iwl_alloc_fw_desc(priv, &priv->ucode_init.data, - pieces.init_data, pieces.init_data_size)) - goto err_pci_alloc; - } - - /* WoWLAN instructions and data */ - if (pieces.wowlan_inst_size && pieces.wowlan_data_size) { - if (iwl_alloc_fw_desc(priv, &priv->ucode_wowlan.code, - pieces.wowlan_inst, - pieces.wowlan_inst_size)) - goto err_pci_alloc; - if (iwl_alloc_fw_desc(priv, &priv->ucode_wowlan.data, - pieces.wowlan_data, - pieces.wowlan_data_size)) - goto err_pci_alloc; - } - - /* Now that we can no longer fail, copy information */ - - /* - * The (size - 16) / 12 formula is based on the information recorded - * for each event, which is of mode 1 (including timestamp) for all - * new microcodes that include this information. - */ - priv->init_evtlog_ptr = pieces.init_evtlog_ptr; - if (pieces.init_evtlog_size) - priv->init_evtlog_size = (pieces.init_evtlog_size - 16)/12; - else - priv->init_evtlog_size = - priv->cfg->base_params->max_event_log_size; - priv->init_errlog_ptr = pieces.init_errlog_ptr; - priv->inst_evtlog_ptr = pieces.inst_evtlog_ptr; - if (pieces.inst_evtlog_size) - priv->inst_evtlog_size = (pieces.inst_evtlog_size - 16)/12; - else - priv->inst_evtlog_size = - priv->cfg->base_params->max_event_log_size; - priv->inst_errlog_ptr = pieces.inst_errlog_ptr; - - priv->new_scan_threshold_behaviour = - !!(ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWSCAN); - - if (!(priv->cfg->sku & EEPROM_SKU_CAP_IPAN_ENABLE)) - ucode_capa.flags &= ~IWL_UCODE_TLV_FLAGS_PAN; - - /* - * if not PAN, then don't support P2P -- might be a uCode - * packaging bug or due to the eeprom check above - */ - if (!(ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN)) - ucode_capa.flags &= ~IWL_UCODE_TLV_FLAGS_P2P; - - if (ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN) { - priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN; - priv->shrd->cmd_queue = IWL_IPAN_CMD_QUEUE_NUM; - } else { - priv->sta_key_max_num = STA_KEY_MAX_NUM; - priv->shrd->cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM; - } - - /* - * figure out the offset of chain noise reset and gain commands - * base on the size of standard phy calibration commands table size - */ - if (ucode_capa.standard_phy_calibration_size > - IWL_MAX_PHY_CALIBRATE_TBL_SIZE) - ucode_capa.standard_phy_calibration_size = - IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE; - - priv->phy_calib_chain_noise_reset_cmd = - ucode_capa.standard_phy_calibration_size; - priv->phy_calib_chain_noise_gain_cmd = - ucode_capa.standard_phy_calibration_size + 1; - - /* initialize all valid contexts */ - iwl_init_context(priv, ucode_capa.flags); - - /************************************************** - * This is still part of probe() in a sense... - * - * 9. Setup and register with mac80211 and debugfs - **************************************************/ - err = iwlagn_mac_setup_register(priv, &ucode_capa); - if (err) - goto out_unbind; - - err = iwl_dbgfs_register(priv, DRV_NAME); - if (err) - IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err); - - /* We have our copies now, allow OS release its copies */ - release_firmware(ucode_raw); - complete(&priv->firmware_loading_complete); - return; - - try_again: - /* try next, if any */ - if (iwl_request_firmware(priv, false)) - goto out_unbind; - release_firmware(ucode_raw); - return; - - err_pci_alloc: - IWL_ERR(priv, "failed to allocate pci memory\n"); - iwl_dealloc_ucode(priv); - out_unbind: - complete(&priv->firmware_loading_complete); - device_release_driver(bus(priv)->dev); - release_firmware(ucode_raw); -} - -static void iwl_rf_kill_ct_config(struct iwl_priv *priv) -{ - struct iwl_ct_kill_config cmd; - struct iwl_ct_kill_throttling_config adv_cmd; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&priv->shrd->lock, flags); - iwl_write32(bus(priv), CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); - spin_unlock_irqrestore(&priv->shrd->lock, flags); - priv->thermal_throttle.ct_kill_toggle = false; - - if (priv->cfg->base_params->support_ct_kill_exit) { - adv_cmd.critical_temperature_enter = - cpu_to_le32(hw_params(priv).ct_kill_threshold); - adv_cmd.critical_temperature_exit = - cpu_to_le32(hw_params(priv).ct_kill_exit_threshold); - - ret = iwl_trans_send_cmd_pdu(trans(priv), - REPLY_CT_KILL_CONFIG_CMD, - CMD_SYNC, sizeof(adv_cmd), &adv_cmd); - if (ret) - IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); - else - IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " - "succeeded, critical temperature enter is %d," - "exit is %d\n", - hw_params(priv).ct_kill_threshold, - hw_params(priv).ct_kill_exit_threshold); - } else { - cmd.critical_temperature_R = - cpu_to_le32(hw_params(priv).ct_kill_threshold); - - ret = iwl_trans_send_cmd_pdu(trans(priv), - REPLY_CT_KILL_CONFIG_CMD, - CMD_SYNC, sizeof(cmd), &cmd); - if (ret) - IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); - else - IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " - "succeeded, " - "critical temperature is %d\n", - hw_params(priv).ct_kill_threshold); - } -} - -static int iwlagn_send_calib_cfg_rt(struct iwl_priv *priv, u32 cfg) -{ - struct iwl_calib_cfg_cmd calib_cfg_cmd; - struct iwl_host_cmd cmd = { - .id = CALIBRATION_CFG_CMD, - .len = { sizeof(struct iwl_calib_cfg_cmd), }, - .data = { &calib_cfg_cmd, }, - }; - - memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd)); - calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_RT_CFG_ALL; - calib_cfg_cmd.ucd_calib_cfg.once.start = cpu_to_le32(cfg); - - return iwl_trans_send_cmd(trans(priv), &cmd); -} - - -static int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant) -{ - struct iwl_tx_ant_config_cmd tx_ant_cmd = { - .valid = cpu_to_le32(valid_tx_ant), - }; - - if (IWL_UCODE_API(priv->ucode_ver) > 1) { - IWL_DEBUG_HC(priv, "select valid tx ant: %u\n", valid_tx_ant); - return iwl_trans_send_cmd_pdu(trans(priv), - TX_ANT_CONFIGURATION_CMD, - CMD_SYNC, - sizeof(struct iwl_tx_ant_config_cmd), - &tx_ant_cmd); - } else { - IWL_DEBUG_HC(priv, "TX_ANT_CONFIGURATION_CMD not supported\n"); - return -EOPNOTSUPP; - } -} - -/** - * iwl_alive_start - called after REPLY_ALIVE notification received - * from protocol/runtime uCode (initialization uCode's - * Alive gets handled by iwl_init_alive_start()). - */ -int iwl_alive_start(struct iwl_priv *priv) -{ - int ret = 0; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - /*TODO: this should go to the transport layer */ - iwl_reset_ict(trans(priv)); - - IWL_DEBUG_INFO(priv, "Runtime Alive received.\n"); - - /* After the ALIVE response, we can send host commands to the uCode */ - set_bit(STATUS_ALIVE, &priv->shrd->status); - - /* Enable watchdog to monitor the driver tx queues */ - iwl_setup_watchdog(priv); - - if (iwl_is_rfkill(priv->shrd)) - return -ERFKILL; - - /* download priority table before any calibration request */ - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist) { - /* Configure Bluetooth device coexistence support */ - if (priv->cfg->bt_params->bt_sco_disable) - priv->bt_enable_pspoll = false; - else - priv->bt_enable_pspoll = true; - - priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK; - priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT; - priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT; - iwlagn_send_advance_bt_config(priv); - priv->bt_valid = IWLAGN_BT_VALID_ENABLE_FLAGS; - priv->cur_rssi_ctx = NULL; - - iwlagn_send_prio_tbl(priv); - - /* FIXME: w/a to force change uCode BT state machine */ - ret = iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN, - BT_COEX_PRIO_TBL_EVT_INIT_CALIB2); - if (ret) - return ret; - ret = iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE, - BT_COEX_PRIO_TBL_EVT_INIT_CALIB2); - if (ret) - return ret; - } else { - /* - * default is 2-wire BT coexexistence support - */ - iwl_send_bt_config(priv); - } - - if (hw_params(priv).calib_rt_cfg) - iwlagn_send_calib_cfg_rt(priv, - hw_params(priv).calib_rt_cfg); - - ieee80211_wake_queues(priv->hw); - - priv->active_rate = IWL_RATES_MASK; - - /* Configure Tx antenna selection based on H/W config */ - iwlagn_send_tx_ant_config(priv, priv->cfg->valid_tx_ant); - - if (iwl_is_associated_ctx(ctx) && !priv->shrd->wowlan) { - struct iwl_rxon_cmd *active_rxon = - (struct iwl_rxon_cmd *)&ctx->active; - /* apply any changes in staging */ - ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; - active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; - } else { - struct iwl_rxon_context *tmp; - /* Initialize our rx_config data */ - for_each_context(priv, tmp) - iwl_connection_init_rx_config(priv, tmp); - - iwlagn_set_rxon_chain(priv, ctx); - } - - if (!priv->shrd->wowlan) { - /* WoWLAN ucode will not reply in the same way, skip it */ - iwl_reset_run_time_calib(priv); - } - - set_bit(STATUS_READY, &priv->shrd->status); - - /* Configure the adapter for unassociated operation */ - ret = iwlagn_commit_rxon(priv, ctx); - if (ret) - return ret; - - /* At this point, the NIC is initialized and operational */ - iwl_rf_kill_ct_config(priv); - - IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n"); - - return iwl_power_update_mode(priv, true); -} - -static void iwl_cancel_deferred_work(struct iwl_priv *priv); - -static void __iwl_down(struct iwl_priv *priv) -{ - int exit_pending; - - IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n"); - - iwl_scan_cancel_timeout(priv, 200); - - /* - * If active, scanning won't cancel it, so say it expired. - * No race since we hold the mutex here and a new one - * can't come in at this time. - */ - ieee80211_remain_on_channel_expired(priv->hw); - - exit_pending = - test_and_set_bit(STATUS_EXIT_PENDING, &priv->shrd->status); - - /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set - * to prevent rearm timer */ - del_timer_sync(&priv->watchdog); - - iwl_clear_ucode_stations(priv, NULL); - iwl_dealloc_bcast_stations(priv); - iwl_clear_driver_stations(priv); - - /* reset BT coex data */ - priv->bt_status = 0; - priv->cur_rssi_ctx = NULL; - priv->bt_is_sco = 0; - if (priv->cfg->bt_params) - priv->bt_traffic_load = - priv->cfg->bt_params->bt_init_traffic_load; - else - priv->bt_traffic_load = 0; - priv->bt_full_concurrent = false; - priv->bt_ci_compliance = 0; - - /* Wipe out the EXIT_PENDING status bit if we are not actually - * exiting the module */ - if (!exit_pending) - clear_bit(STATUS_EXIT_PENDING, &priv->shrd->status); - - if (priv->mac80211_registered) - ieee80211_stop_queues(priv->hw); - - iwl_trans_stop_device(trans(priv)); - - /* Clear out all status bits but a few that are stable across reset */ - priv->shrd->status &= - test_bit(STATUS_RF_KILL_HW, &priv->shrd->status) << - STATUS_RF_KILL_HW | - test_bit(STATUS_GEO_CONFIGURED, &priv->shrd->status) << - STATUS_GEO_CONFIGURED | - test_bit(STATUS_FW_ERROR, &priv->shrd->status) << - STATUS_FW_ERROR | - test_bit(STATUS_EXIT_PENDING, &priv->shrd->status) << - STATUS_EXIT_PENDING; - - dev_kfree_skb(priv->beacon_skb); - priv->beacon_skb = NULL; -} - -static void iwl_down(struct iwl_priv *priv) -{ - mutex_lock(&priv->shrd->mutex); - __iwl_down(priv); - mutex_unlock(&priv->shrd->mutex); - - iwl_cancel_deferred_work(priv); -} - -#define MAX_HW_RESTARTS 5 - -static int __iwl_up(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx; - int ret; - - lockdep_assert_held(&priv->shrd->mutex); - - if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status)) { - IWL_WARN(priv, "Exit pending; will not bring the NIC up\n"); - return -EIO; - } - - for_each_context(priv, ctx) { - ret = iwlagn_alloc_bcast_station(priv, ctx); - if (ret) { - iwl_dealloc_bcast_stations(priv); - return ret; - } - } - - ret = iwlagn_run_init_ucode(priv); - if (ret) { - IWL_ERR(priv, "Failed to run INIT ucode: %d\n", ret); - goto error; - } - - ret = iwlagn_load_ucode_wait_alive(priv, - &priv->ucode_rt, - IWL_UCODE_REGULAR); - if (ret) { - IWL_ERR(priv, "Failed to start RT ucode: %d\n", ret); - goto error; - } - - ret = iwl_alive_start(priv); - if (ret) - goto error; - return 0; - - error: - set_bit(STATUS_EXIT_PENDING, &priv->shrd->status); - __iwl_down(priv); - clear_bit(STATUS_EXIT_PENDING, &priv->shrd->status); - - IWL_ERR(priv, "Unable to initialize device.\n"); - return ret; -} - - -/***************************************************************************** - * - * Workqueue callbacks - * - *****************************************************************************/ - -static void iwl_bg_run_time_calib_work(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, - run_time_calib_work); - - mutex_lock(&priv->shrd->mutex); - - if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status) || - test_bit(STATUS_SCANNING, &priv->shrd->status)) { - mutex_unlock(&priv->shrd->mutex); - return; - } - - if (priv->start_calib) { - iwl_chain_noise_calibration(priv); - iwl_sensitivity_calibration(priv); - } - - mutex_unlock(&priv->shrd->mutex); -} - -static void iwlagn_prepare_restart(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx; - bool bt_full_concurrent; - u8 bt_ci_compliance; - u8 bt_load; - u8 bt_status; - bool bt_is_sco; - - lockdep_assert_held(&priv->shrd->mutex); - - for_each_context(priv, ctx) - ctx->vif = NULL; - priv->is_open = 0; - - /* - * __iwl_down() will clear the BT status variables, - * which is correct, but when we restart we really - * want to keep them so restore them afterwards. - * - * The restart process will later pick them up and - * re-configure the hw when we reconfigure the BT - * command. - */ - bt_full_concurrent = priv->bt_full_concurrent; - bt_ci_compliance = priv->bt_ci_compliance; - bt_load = priv->bt_traffic_load; - bt_status = priv->bt_status; - bt_is_sco = priv->bt_is_sco; - - __iwl_down(priv); - - priv->bt_full_concurrent = bt_full_concurrent; - priv->bt_ci_compliance = bt_ci_compliance; - priv->bt_traffic_load = bt_load; - priv->bt_status = bt_status; - priv->bt_is_sco = bt_is_sco; -} - -static void iwl_bg_restart(struct work_struct *data) -{ - struct iwl_priv *priv = container_of(data, struct iwl_priv, restart); - - if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status)) - return; - - if (test_and_clear_bit(STATUS_FW_ERROR, &priv->shrd->status)) { - mutex_lock(&priv->shrd->mutex); - iwlagn_prepare_restart(priv); - mutex_unlock(&priv->shrd->mutex); - iwl_cancel_deferred_work(priv); - ieee80211_restart_hw(priv->hw); - } else { - WARN_ON(1); - } -} - -/***************************************************************************** - * - * mac80211 entry point functions - * - *****************************************************************************/ - -static const struct ieee80211_iface_limit iwlagn_sta_ap_limits[] = { - { - .max = 1, - .types = BIT(NL80211_IFTYPE_STATION), - }, - { - .max = 1, - .types = BIT(NL80211_IFTYPE_AP), - }, -}; - -static const struct ieee80211_iface_limit iwlagn_2sta_limits[] = { - { - .max = 2, - .types = BIT(NL80211_IFTYPE_STATION), - }, -}; - -static const struct ieee80211_iface_limit iwlagn_p2p_sta_go_limits[] = { - { - .max = 1, - .types = BIT(NL80211_IFTYPE_STATION), - }, - { - .max = 1, - .types = BIT(NL80211_IFTYPE_P2P_GO) | - BIT(NL80211_IFTYPE_AP), - }, -}; - -static const struct ieee80211_iface_limit iwlagn_p2p_2sta_limits[] = { - { - .max = 2, - .types = BIT(NL80211_IFTYPE_STATION), - }, - { - .max = 1, - .types = BIT(NL80211_IFTYPE_P2P_CLIENT), - }, -}; - -static const struct ieee80211_iface_combination -iwlagn_iface_combinations_dualmode[] = { - { .num_different_channels = 1, - .max_interfaces = 2, - .beacon_int_infra_match = true, - .limits = iwlagn_sta_ap_limits, - .n_limits = ARRAY_SIZE(iwlagn_sta_ap_limits), - }, - { .num_different_channels = 1, - .max_interfaces = 2, - .limits = iwlagn_2sta_limits, - .n_limits = ARRAY_SIZE(iwlagn_2sta_limits), - }, -}; - -static const struct ieee80211_iface_combination -iwlagn_iface_combinations_p2p[] = { - { .num_different_channels = 1, - .max_interfaces = 2, - .beacon_int_infra_match = true, - .limits = iwlagn_p2p_sta_go_limits, - .n_limits = ARRAY_SIZE(iwlagn_p2p_sta_go_limits), - }, - { .num_different_channels = 1, - .max_interfaces = 2, - .limits = iwlagn_p2p_2sta_limits, - .n_limits = ARRAY_SIZE(iwlagn_p2p_2sta_limits), - }, -}; - -/* - * Not a mac80211 entry point function, but it fits in with all the - * other mac80211 functions grouped here. - */ -static int iwlagn_mac_setup_register(struct iwl_priv *priv, - struct iwlagn_ucode_capabilities *capa) -{ - int ret; - struct ieee80211_hw *hw = priv->hw; - struct iwl_rxon_context *ctx; - - hw->rate_control_algorithm = "iwl-agn-rs"; - - /* Tell mac80211 our characteristics */ - hw->flags = IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_AMPDU_AGGREGATION | - IEEE80211_HW_NEED_DTIM_PERIOD | - IEEE80211_HW_SPECTRUM_MGMT | - IEEE80211_HW_REPORTS_TX_ACK_STATUS; - - /* - * Including the following line will crash some AP's. This - * workaround removes the stimulus which causes the crash until - * the AP software can be fixed. - hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF; - */ - - hw->flags |= IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_SUPPORTS_DYNAMIC_PS; - - if (priv->cfg->sku & EEPROM_SKU_CAP_11N_ENABLE) - hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | - IEEE80211_HW_SUPPORTS_STATIC_SMPS; - - if (capa->flags & IWL_UCODE_TLV_FLAGS_MFP) - hw->flags |= IEEE80211_HW_MFP_CAPABLE; - - hw->sta_data_size = sizeof(struct iwl_station_priv); - hw->vif_data_size = sizeof(struct iwl_vif_priv); - - for_each_context(priv, ctx) { - hw->wiphy->interface_modes |= ctx->interface_modes; - hw->wiphy->interface_modes |= ctx->exclusive_interface_modes; - } - - BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); - - if (hw->wiphy->interface_modes & BIT(NL80211_IFTYPE_P2P_CLIENT)) { - hw->wiphy->iface_combinations = iwlagn_iface_combinations_p2p; - hw->wiphy->n_iface_combinations = - ARRAY_SIZE(iwlagn_iface_combinations_p2p); - } else if (hw->wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) { - hw->wiphy->iface_combinations = iwlagn_iface_combinations_dualmode; - hw->wiphy->n_iface_combinations = - ARRAY_SIZE(iwlagn_iface_combinations_dualmode); - } - - hw->wiphy->max_remain_on_channel_duration = 1000; - - hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY | - WIPHY_FLAG_DISABLE_BEACON_HINTS | - WIPHY_FLAG_IBSS_RSN; - - if (priv->ucode_wowlan.code.len && device_can_wakeup(bus(priv)->dev)) { - hw->wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT | - WIPHY_WOWLAN_DISCONNECT | - WIPHY_WOWLAN_EAP_IDENTITY_REQ | - WIPHY_WOWLAN_RFKILL_RELEASE; - if (!iwlagn_mod_params.sw_crypto) - hw->wiphy->wowlan.flags |= - WIPHY_WOWLAN_SUPPORTS_GTK_REKEY | - WIPHY_WOWLAN_GTK_REKEY_FAILURE; - - hw->wiphy->wowlan.n_patterns = IWLAGN_WOWLAN_MAX_PATTERNS; - hw->wiphy->wowlan.pattern_min_len = - IWLAGN_WOWLAN_MIN_PATTERN_LEN; - hw->wiphy->wowlan.pattern_max_len = - IWLAGN_WOWLAN_MAX_PATTERN_LEN; - } - - if (iwlagn_mod_params.power_save) - hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT; - else - hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; - - hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX; - /* we create the 802.11 header and a zero-length SSID element */ - hw->wiphy->max_scan_ie_len = capa->max_probe_length - 24 - 2; - - /* Default value; 4 EDCA QOS priorities */ - hw->queues = 4; - - hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL; - - if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) - priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = - &priv->bands[IEEE80211_BAND_2GHZ]; - if (priv->bands[IEEE80211_BAND_5GHZ].n_channels) - priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = - &priv->bands[IEEE80211_BAND_5GHZ]; - - iwl_leds_init(priv); - - ret = ieee80211_register_hw(priv->hw); - if (ret) { - IWL_ERR(priv, "Failed to register hw (error %d)\n", ret); - return ret; - } - priv->mac80211_registered = 1; - - return 0; -} - - -static int iwlagn_mac_start(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - int ret; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - /* we should be verifying the device is ready to be opened */ - mutex_lock(&priv->shrd->mutex); - ret = __iwl_up(priv); - mutex_unlock(&priv->shrd->mutex); - if (ret) - return ret; - - IWL_DEBUG_INFO(priv, "Start UP work done.\n"); - - /* Now we should be done, and the READY bit should be set. */ - if (WARN_ON(!test_bit(STATUS_READY, &priv->shrd->status))) - ret = -EIO; - - iwlagn_led_enable(priv); - - priv->is_open = 1; - IWL_DEBUG_MAC80211(priv, "leave\n"); - return 0; -} - -static void iwlagn_mac_stop(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (!priv->is_open) - return; - - priv->is_open = 0; - - iwl_down(priv); - - flush_workqueue(priv->shrd->workqueue); - - /* User space software may expect getting rfkill changes - * even if interface is down */ - iwl_write32(bus(priv), CSR_INT, 0xFFFFFFFF); - iwl_enable_rfkill_int(priv); - - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -#ifdef CONFIG_PM_SLEEP -static int iwlagn_send_patterns(struct iwl_priv *priv, - struct cfg80211_wowlan *wowlan) -{ - struct iwlagn_wowlan_patterns_cmd *pattern_cmd; - struct iwl_host_cmd cmd = { - .id = REPLY_WOWLAN_PATTERNS, - .dataflags[0] = IWL_HCMD_DFL_NOCOPY, - .flags = CMD_SYNC, - }; - int i, err; - - if (!wowlan->n_patterns) - return 0; - - cmd.len[0] = sizeof(*pattern_cmd) + - wowlan->n_patterns * sizeof(struct iwlagn_wowlan_pattern); - - pattern_cmd = kmalloc(cmd.len[0], GFP_KERNEL); - if (!pattern_cmd) - return -ENOMEM; - - pattern_cmd->n_patterns = cpu_to_le32(wowlan->n_patterns); - - for (i = 0; i < wowlan->n_patterns; i++) { - int mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8); - - memcpy(&pattern_cmd->patterns[i].mask, - wowlan->patterns[i].mask, mask_len); - memcpy(&pattern_cmd->patterns[i].pattern, - wowlan->patterns[i].pattern, - wowlan->patterns[i].pattern_len); - pattern_cmd->patterns[i].mask_size = mask_len; - pattern_cmd->patterns[i].pattern_size = - wowlan->patterns[i].pattern_len; - } - - cmd.data[0] = pattern_cmd; - err = iwl_trans_send_cmd(trans(priv), &cmd); - kfree(pattern_cmd); - return err; -} -#endif - -static void iwlagn_mac_set_rekey_data(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct cfg80211_gtk_rekey_data *data) -{ - struct iwl_priv *priv = hw->priv; - - if (iwlagn_mod_params.sw_crypto) - return; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - mutex_lock(&priv->shrd->mutex); - - if (priv->contexts[IWL_RXON_CTX_BSS].vif != vif) - goto out; - - memcpy(priv->kek, data->kek, NL80211_KEK_LEN); - memcpy(priv->kck, data->kck, NL80211_KCK_LEN); - priv->replay_ctr = cpu_to_le64(be64_to_cpup((__be64 *)&data->replay_ctr)); - priv->have_rekey_data = true; - - out: - mutex_unlock(&priv->shrd->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -struct wowlan_key_data { - struct iwl_rxon_context *ctx; - struct iwlagn_wowlan_rsc_tsc_params_cmd *rsc_tsc; - struct iwlagn_wowlan_tkip_params_cmd *tkip; - const u8 *bssid; - bool error, use_rsc_tsc, use_tkip; -}; - -#ifdef CONFIG_PM_SLEEP -static void iwlagn_convert_p1k(u16 *p1k, __le16 *out) -{ - int i; - - for (i = 0; i < IWLAGN_P1K_SIZE; i++) - out[i] = cpu_to_le16(p1k[i]); -} - -static void iwlagn_wowlan_program_keys(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta, - struct ieee80211_key_conf *key, - void *_data) -{ - struct iwl_priv *priv = hw->priv; - struct wowlan_key_data *data = _data; - struct iwl_rxon_context *ctx = data->ctx; - struct aes_sc *aes_sc, *aes_tx_sc = NULL; - struct tkip_sc *tkip_sc, *tkip_tx_sc = NULL; - struct iwlagn_p1k_cache *rx_p1ks; - u8 *rx_mic_key; - struct ieee80211_key_seq seq; - u32 cur_rx_iv32 = 0; - u16 p1k[IWLAGN_P1K_SIZE]; - int ret, i; - - mutex_lock(&priv->shrd->mutex); - - if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || - key->cipher == WLAN_CIPHER_SUITE_WEP104) && - !sta && !ctx->key_mapping_keys) - ret = iwl_set_default_wep_key(priv, ctx, key); - else - ret = iwl_set_dynamic_key(priv, ctx, key, sta); - - if (ret) { - IWL_ERR(priv, "Error setting key during suspend!\n"); - data->error = true; - } - - switch (key->cipher) { - case WLAN_CIPHER_SUITE_TKIP: - if (sta) { - tkip_sc = data->rsc_tsc->all_tsc_rsc.tkip.unicast_rsc; - tkip_tx_sc = &data->rsc_tsc->all_tsc_rsc.tkip.tsc; - - rx_p1ks = data->tkip->rx_uni; - - ieee80211_get_key_tx_seq(key, &seq); - tkip_tx_sc->iv16 = cpu_to_le16(seq.tkip.iv16); - tkip_tx_sc->iv32 = cpu_to_le32(seq.tkip.iv32); - - ieee80211_get_tkip_p1k_iv(key, seq.tkip.iv32, p1k); - iwlagn_convert_p1k(p1k, data->tkip->tx.p1k); - - memcpy(data->tkip->mic_keys.tx, - &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY], - IWLAGN_MIC_KEY_SIZE); - - rx_mic_key = data->tkip->mic_keys.rx_unicast; - } else { - tkip_sc = data->rsc_tsc->all_tsc_rsc.tkip.multicast_rsc; - rx_p1ks = data->tkip->rx_multi; - rx_mic_key = data->tkip->mic_keys.rx_mcast; - } - - /* - * For non-QoS this relies on the fact that both the uCode and - * mac80211 use TID 0 (as they need to to avoid replay attacks) - * for checking the IV in the frames. - */ - for (i = 0; i < IWLAGN_NUM_RSC; i++) { - ieee80211_get_key_rx_seq(key, i, &seq); - tkip_sc[i].iv16 = cpu_to_le16(seq.tkip.iv16); - tkip_sc[i].iv32 = cpu_to_le32(seq.tkip.iv32); - /* wrapping isn't allowed, AP must rekey */ - if (seq.tkip.iv32 > cur_rx_iv32) - cur_rx_iv32 = seq.tkip.iv32; - } - - ieee80211_get_tkip_rx_p1k(key, data->bssid, cur_rx_iv32, p1k); - iwlagn_convert_p1k(p1k, rx_p1ks[0].p1k); - ieee80211_get_tkip_rx_p1k(key, data->bssid, - cur_rx_iv32 + 1, p1k); - iwlagn_convert_p1k(p1k, rx_p1ks[1].p1k); - - memcpy(rx_mic_key, - &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY], - IWLAGN_MIC_KEY_SIZE); - - data->use_tkip = true; - data->use_rsc_tsc = true; - break; - case WLAN_CIPHER_SUITE_CCMP: - if (sta) { - u8 *pn = seq.ccmp.pn; - - aes_sc = data->rsc_tsc->all_tsc_rsc.aes.unicast_rsc; - aes_tx_sc = &data->rsc_tsc->all_tsc_rsc.aes.tsc; - - ieee80211_get_key_tx_seq(key, &seq); - aes_tx_sc->pn = cpu_to_le64( - (u64)pn[5] | - ((u64)pn[4] << 8) | - ((u64)pn[3] << 16) | - ((u64)pn[2] << 24) | - ((u64)pn[1] << 32) | - ((u64)pn[0] << 40)); - } else - aes_sc = data->rsc_tsc->all_tsc_rsc.aes.multicast_rsc; - - /* - * For non-QoS this relies on the fact that both the uCode and - * mac80211 use TID 0 for checking the IV in the frames. - */ - for (i = 0; i < IWLAGN_NUM_RSC; i++) { - u8 *pn = seq.ccmp.pn; - - ieee80211_get_key_rx_seq(key, i, &seq); - aes_sc->pn = cpu_to_le64( - (u64)pn[5] | - ((u64)pn[4] << 8) | - ((u64)pn[3] << 16) | - ((u64)pn[2] << 24) | - ((u64)pn[1] << 32) | - ((u64)pn[0] << 40)); - } - data->use_rsc_tsc = true; - break; - } - - mutex_unlock(&priv->shrd->mutex); -} - -static int iwlagn_mac_suspend(struct ieee80211_hw *hw, - struct cfg80211_wowlan *wowlan) -{ - struct iwl_priv *priv = hw->priv; - struct iwlagn_wowlan_wakeup_filter_cmd wakeup_filter_cmd; - struct iwl_rxon_cmd rxon; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct iwlagn_wowlan_kek_kck_material_cmd kek_kck_cmd; - struct iwlagn_wowlan_tkip_params_cmd tkip_cmd = {}; - struct wowlan_key_data key_data = { - .ctx = ctx, - .bssid = ctx->active.bssid_addr, - .use_rsc_tsc = false, - .tkip = &tkip_cmd, - .use_tkip = false, - }; - int ret, i; - u16 seq; - - if (WARN_ON(!wowlan)) - return -EINVAL; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - mutex_lock(&priv->shrd->mutex); - - /* Don't attempt WoWLAN when not associated, tear down instead. */ - if (!ctx->vif || ctx->vif->type != NL80211_IFTYPE_STATION || - !iwl_is_associated_ctx(ctx)) { - ret = 1; - goto out; - } - - key_data.rsc_tsc = kzalloc(sizeof(*key_data.rsc_tsc), GFP_KERNEL); - if (!key_data.rsc_tsc) { - ret = -ENOMEM; - goto out; - } - - memset(&wakeup_filter_cmd, 0, sizeof(wakeup_filter_cmd)); - - /* - * We know the last used seqno, and the uCode expects to know that - * one, it will increment before TX. - */ - seq = le16_to_cpu(priv->last_seq_ctl) & IEEE80211_SCTL_SEQ; - wakeup_filter_cmd.non_qos_seq = cpu_to_le16(seq); - - /* - * For QoS counters, we store the one to use next, so subtract 0x10 - * since the uCode will add 0x10 before using the value. - */ - for (i = 0; i < 8; i++) { - seq = priv->shrd->tid_data[IWL_AP_ID][i].seq_number; - seq -= 0x10; - wakeup_filter_cmd.qos_seq[i] = cpu_to_le16(seq); - } - - if (wowlan->disconnect) - wakeup_filter_cmd.enabled |= - cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_BEACON_MISS | - IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE); - if (wowlan->magic_pkt) - wakeup_filter_cmd.enabled |= - cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET); - if (wowlan->gtk_rekey_failure) - wakeup_filter_cmd.enabled |= - cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL); - if (wowlan->eap_identity_req) - wakeup_filter_cmd.enabled |= - cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ); - if (wowlan->four_way_handshake) - wakeup_filter_cmd.enabled |= - cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE); - if (wowlan->rfkill_release) - wakeup_filter_cmd.enabled |= - cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_RFKILL); - if (wowlan->n_patterns) - wakeup_filter_cmd.enabled |= - cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH); - - iwl_scan_cancel_timeout(priv, 200); - - memcpy(&rxon, &ctx->active, sizeof(rxon)); - - iwl_trans_stop_device(trans(priv)); - - priv->shrd->wowlan = true; - - ret = iwlagn_load_ucode_wait_alive(priv, &priv->ucode_wowlan, - IWL_UCODE_WOWLAN); - if (ret) - goto error; - - /* now configure WoWLAN ucode */ - ret = iwl_alive_start(priv); - if (ret) - goto error; - - memcpy(&ctx->staging, &rxon, sizeof(rxon)); - ret = iwlagn_commit_rxon(priv, ctx); - if (ret) - goto error; - - ret = iwl_power_update_mode(priv, true); - if (ret) - goto error; - - if (!iwlagn_mod_params.sw_crypto) { - /* mark all keys clear */ - priv->ucode_key_table = 0; - ctx->key_mapping_keys = 0; - - /* - * This needs to be unlocked due to lock ordering - * constraints. Since we're in the suspend path - * that isn't really a problem though. - */ - mutex_unlock(&priv->shrd->mutex); - ieee80211_iter_keys(priv->hw, ctx->vif, - iwlagn_wowlan_program_keys, - &key_data); - mutex_lock(&priv->shrd->mutex); - if (key_data.error) { - ret = -EIO; - goto error; - } - - if (key_data.use_rsc_tsc) { - struct iwl_host_cmd rsc_tsc_cmd = { - .id = REPLY_WOWLAN_TSC_RSC_PARAMS, - .flags = CMD_SYNC, - .data[0] = key_data.rsc_tsc, - .dataflags[0] = IWL_HCMD_DFL_NOCOPY, - .len[0] = sizeof(*key_data.rsc_tsc), - }; - - ret = iwl_trans_send_cmd(trans(priv), &rsc_tsc_cmd); - if (ret) - goto error; - } - - if (key_data.use_tkip) { - ret = iwl_trans_send_cmd_pdu(trans(priv), - REPLY_WOWLAN_TKIP_PARAMS, - CMD_SYNC, sizeof(tkip_cmd), - &tkip_cmd); - if (ret) - goto error; - } - - if (priv->have_rekey_data) { - memset(&kek_kck_cmd, 0, sizeof(kek_kck_cmd)); - memcpy(kek_kck_cmd.kck, priv->kck, NL80211_KCK_LEN); - kek_kck_cmd.kck_len = cpu_to_le16(NL80211_KCK_LEN); - memcpy(kek_kck_cmd.kek, priv->kek, NL80211_KEK_LEN); - kek_kck_cmd.kek_len = cpu_to_le16(NL80211_KEK_LEN); - kek_kck_cmd.replay_ctr = priv->replay_ctr; - - ret = iwl_trans_send_cmd_pdu(trans(priv), - REPLY_WOWLAN_KEK_KCK_MATERIAL, - CMD_SYNC, sizeof(kek_kck_cmd), - &kek_kck_cmd); - if (ret) - goto error; - } - } - - ret = iwl_trans_send_cmd_pdu(trans(priv), REPLY_WOWLAN_WAKEUP_FILTER, - CMD_SYNC, sizeof(wakeup_filter_cmd), - &wakeup_filter_cmd); - if (ret) - goto error; - - ret = iwlagn_send_patterns(priv, wowlan); - if (ret) - goto error; - - device_set_wakeup_enable(bus(priv)->dev, true); - - /* Now let the ucode operate on its own */ - iwl_write32(bus(priv), CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE); - - goto out; - - error: - priv->shrd->wowlan = false; - iwlagn_prepare_restart(priv); - ieee80211_restart_hw(priv->hw); - out: - mutex_unlock(&priv->shrd->mutex); - kfree(key_data.rsc_tsc); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return ret; -} - -static int iwlagn_mac_resume(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct ieee80211_vif *vif; - unsigned long flags; - u32 base, status = 0xffffffff; - int ret = -EIO; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - mutex_lock(&priv->shrd->mutex); - - iwl_write32(bus(priv), CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE); - - base = priv->device_pointers.error_event_table; - if (iwlagn_hw_valid_rtc_data_addr(base)) { - spin_lock_irqsave(&bus(priv)->reg_lock, flags); - ret = iwl_grab_nic_access_silent(bus(priv)); - if (ret == 0) { - iwl_write32(bus(priv), HBUS_TARG_MEM_RADDR, base); - status = iwl_read32(bus(priv), HBUS_TARG_MEM_RDAT); - iwl_release_nic_access(bus(priv)); - } - spin_unlock_irqrestore(&bus(priv)->reg_lock, flags); - -#ifdef CONFIG_IWLWIFI_DEBUGFS - if (ret == 0) { - if (!priv->wowlan_sram) - priv->wowlan_sram = - kzalloc(priv->ucode_wowlan.data.len, - GFP_KERNEL); - - if (priv->wowlan_sram) - _iwl_read_targ_mem_words( - bus(priv), 0x800000, priv->wowlan_sram, - priv->ucode_wowlan.data.len / 4); - } -#endif - } - - /* we'll clear ctx->vif during iwlagn_prepare_restart() */ - vif = ctx->vif; - - priv->shrd->wowlan = false; - - device_set_wakeup_enable(bus(priv)->dev, false); - - iwlagn_prepare_restart(priv); - - memset((void *)&ctx->active, 0, sizeof(ctx->active)); - iwl_connection_init_rx_config(priv, ctx); - iwlagn_set_rxon_chain(priv, ctx); - - mutex_unlock(&priv->shrd->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - ieee80211_resume_disconnect(vif); - - return 1; -} -#endif - -static void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MACDUMP(priv, "enter\n"); - - IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, - ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); - - if (iwlagn_tx_skb(priv, skb)) - dev_kfree_skb_any(skb); - - IWL_DEBUG_MACDUMP(priv, "leave\n"); -} - -static void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_key_conf *keyconf, - struct ieee80211_sta *sta, - u32 iv32, u16 *phase1key) -{ - struct iwl_priv *priv = hw->priv; - - iwl_update_tkip_key(priv, vif, keyconf, sta, iv32, phase1key); -} - -static int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta, - struct ieee80211_key_conf *key) -{ - struct iwl_priv *priv = hw->priv; - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - struct iwl_rxon_context *ctx = vif_priv->ctx; - int ret; - bool is_default_wep_key = false; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (iwlagn_mod_params.sw_crypto) { - IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n"); - return -EOPNOTSUPP; - } - - /* - * We could program these keys into the hardware as well, but we - * don't expect much multicast traffic in IBSS and having keys - * for more stations is probably more useful. - * - * Mark key TX-only and return 0. - */ - if (vif->type == NL80211_IFTYPE_ADHOC && - !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { - key->hw_key_idx = WEP_INVALID_OFFSET; - return 0; - } - - /* If they key was TX-only, accept deletion */ - if (cmd == DISABLE_KEY && key->hw_key_idx == WEP_INVALID_OFFSET) - return 0; - - mutex_lock(&priv->shrd->mutex); - iwl_scan_cancel_timeout(priv, 100); - - BUILD_BUG_ON(WEP_INVALID_OFFSET == IWLAGN_HW_KEY_DEFAULT); - - /* - * If we are getting WEP group key and we didn't receive any key mapping - * so far, we are in legacy wep mode (group key only), otherwise we are - * in 1X mode. - * In legacy wep mode, we use another host command to the uCode. - */ - if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || - key->cipher == WLAN_CIPHER_SUITE_WEP104) && !sta) { - if (cmd == SET_KEY) - is_default_wep_key = !ctx->key_mapping_keys; - else - is_default_wep_key = - key->hw_key_idx == IWLAGN_HW_KEY_DEFAULT; - } - - - switch (cmd) { - case SET_KEY: - if (is_default_wep_key) { - ret = iwl_set_default_wep_key(priv, vif_priv->ctx, key); - break; - } - ret = iwl_set_dynamic_key(priv, vif_priv->ctx, key, sta); - if (ret) { - /* - * can't add key for RX, but we don't need it - * in the device for TX so still return 0 - */ - ret = 0; - key->hw_key_idx = WEP_INVALID_OFFSET; - } - - IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n"); - break; - case DISABLE_KEY: - if (is_default_wep_key) - ret = iwl_remove_default_wep_key(priv, ctx, key); - else - ret = iwl_remove_dynamic_key(priv, ctx, key, sta); - - IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n"); - break; - default: - ret = -EINVAL; - } - - mutex_unlock(&priv->shrd->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return ret; -} - -static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - enum ieee80211_ampdu_mlme_action action, - struct ieee80211_sta *sta, u16 tid, u16 *ssn, - u8 buf_size) -{ - struct iwl_priv *priv = hw->priv; - int ret = -EINVAL; - struct iwl_station_priv *sta_priv = (void *) sta->drv_priv; - struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); - - IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n", - sta->addr, tid); - - if (!(priv->cfg->sku & EEPROM_SKU_CAP_11N_ENABLE)) - return -EACCES; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - mutex_lock(&priv->shrd->mutex); - - switch (action) { - case IEEE80211_AMPDU_RX_START: - IWL_DEBUG_HT(priv, "start Rx\n"); - ret = iwl_sta_rx_agg_start(priv, sta, tid, *ssn); - break; - case IEEE80211_AMPDU_RX_STOP: - IWL_DEBUG_HT(priv, "stop Rx\n"); - ret = iwl_sta_rx_agg_stop(priv, sta, tid); - if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status)) - ret = 0; - break; - case IEEE80211_AMPDU_TX_START: - IWL_DEBUG_HT(priv, "start Tx\n"); - ret = iwlagn_tx_agg_start(priv, vif, sta, tid, ssn); - break; - case IEEE80211_AMPDU_TX_STOP: - IWL_DEBUG_HT(priv, "stop Tx\n"); - ret = iwlagn_tx_agg_stop(priv, vif, sta, tid); - if ((ret == 0) && (priv->agg_tids_count > 0)) { - priv->agg_tids_count--; - IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n", - priv->agg_tids_count); - } - if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status)) - ret = 0; - if (!priv->agg_tids_count && priv->cfg->ht_params && - priv->cfg->ht_params->use_rts_for_aggregation) { - /* - * switch off RTS/CTS if it was previously enabled - */ - sta_priv->lq_sta.lq.general_params.flags &= - ~LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK; - iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif), - &sta_priv->lq_sta.lq, CMD_ASYNC, false); - } - break; - case IEEE80211_AMPDU_TX_OPERATIONAL: - buf_size = min_t(int, buf_size, LINK_QUAL_AGG_FRAME_LIMIT_DEF); - - iwl_trans_tx_agg_setup(trans(priv), ctx->ctxid, iwl_sta_id(sta), - tid, buf_size); - - /* - * If the limit is 0, then it wasn't initialised yet, - * use the default. We can do that since we take the - * minimum below, and we don't want to go above our - * default due to hardware restrictions. - */ - if (sta_priv->max_agg_bufsize == 0) - sta_priv->max_agg_bufsize = - LINK_QUAL_AGG_FRAME_LIMIT_DEF; - - /* - * Even though in theory the peer could have different - * aggregation reorder buffer sizes for different sessions, - * our ucode doesn't allow for that and has a global limit - * for each station. Therefore, use the minimum of all the - * aggregation sessions and our default value. - */ - sta_priv->max_agg_bufsize = - min(sta_priv->max_agg_bufsize, buf_size); - - if (priv->cfg->ht_params && - priv->cfg->ht_params->use_rts_for_aggregation) { - /* - * switch to RTS/CTS if it is the prefer protection - * method for HT traffic - */ - - sta_priv->lq_sta.lq.general_params.flags |= - LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK; - } - priv->agg_tids_count++; - IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n", - priv->agg_tids_count); - - sta_priv->lq_sta.lq.agg_params.agg_frame_cnt_limit = - sta_priv->max_agg_bufsize; - - iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif), - &sta_priv->lq_sta.lq, CMD_ASYNC, false); - - IWL_INFO(priv, "Tx aggregation enabled on ra = %pM tid = %d\n", - sta->addr, tid); - ret = 0; - break; - } - mutex_unlock(&priv->shrd->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - return ret; -} - -static int iwlagn_mac_sta_add(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta) -{ - struct iwl_priv *priv = hw->priv; - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - bool is_ap = vif->type == NL80211_IFTYPE_STATION; - int ret = 0; - u8 sta_id; - - IWL_DEBUG_MAC80211(priv, "received request to add station %pM\n", - sta->addr); - mutex_lock(&priv->shrd->mutex); - IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n", - sta->addr); - sta_priv->sta_id = IWL_INVALID_STATION; - - atomic_set(&sta_priv->pending_frames, 0); - if (vif->type == NL80211_IFTYPE_AP) - sta_priv->client = true; - - ret = iwl_add_station_common(priv, vif_priv->ctx, sta->addr, - is_ap, sta, &sta_id); - if (ret) { - IWL_ERR(priv, "Unable to add station %pM (%d)\n", - sta->addr, ret); - /* Should we return success if return code is EEXIST ? */ - goto out; - } - - sta_priv->sta_id = sta_id; - - /* Initialize rate scaling */ - IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n", - sta->addr); - iwl_rs_rate_init(priv, sta, sta_id); - out: - mutex_unlock(&priv->shrd->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return ret; -} - -static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw, - struct ieee80211_channel_switch *ch_switch) -{ - struct iwl_priv *priv = hw->priv; - const struct iwl_channel_info *ch_info; - struct ieee80211_conf *conf = &hw->conf; - struct ieee80211_channel *channel = ch_switch->channel; - struct iwl_ht_config *ht_conf = &priv->current_ht_config; - /* - * MULTI-FIXME - * When we add support for multiple interfaces, we need to - * revisit this. The channel switch command in the device - * only affects the BSS context, but what does that really - * mean? And what if we get a CSA on the second interface? - * This needs a lot of work. - */ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - u16 ch; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - mutex_lock(&priv->shrd->mutex); - - if (iwl_is_rfkill(priv->shrd)) - goto out; - - if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status) || - test_bit(STATUS_SCANNING, &priv->shrd->status) || - test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->shrd->status)) - goto out; - - if (!iwl_is_associated_ctx(ctx)) - goto out; - - if (!priv->cfg->lib->set_channel_switch) - goto out; - - ch = channel->hw_value; - if (le16_to_cpu(ctx->active.channel) == ch) - goto out; - - ch_info = iwl_get_channel_info(priv, channel->band, ch); - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_MAC80211(priv, "invalid channel\n"); - goto out; - } - - spin_lock_irq(&priv->shrd->lock); - - priv->current_ht_config.smps = conf->smps_mode; - - /* Configure HT40 channels */ - ctx->ht.enabled = conf_is_ht(conf); - if (ctx->ht.enabled) { - if (conf_is_ht40_minus(conf)) { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_BELOW; - ctx->ht.is_40mhz = true; - } else if (conf_is_ht40_plus(conf)) { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_ABOVE; - ctx->ht.is_40mhz = true; - } else { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_NONE; - ctx->ht.is_40mhz = false; - } - } else - ctx->ht.is_40mhz = false; - - if ((le16_to_cpu(ctx->staging.channel) != ch)) - ctx->staging.flags = 0; - - iwl_set_rxon_channel(priv, channel, ctx); - iwl_set_rxon_ht(priv, ht_conf); - iwl_set_flags_for_band(priv, ctx, channel->band, ctx->vif); - - spin_unlock_irq(&priv->shrd->lock); - - iwl_set_rate(priv); - /* - * at this point, staging_rxon has the - * configuration for channel switch - */ - set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->shrd->status); - priv->switch_channel = cpu_to_le16(ch); - if (priv->cfg->lib->set_channel_switch(priv, ch_switch)) { - clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->shrd->status); - priv->switch_channel = 0; - ieee80211_chswitch_done(ctx->vif, false); - } - -out: - mutex_unlock(&priv->shrd->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -static void iwlagn_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - u64 multicast) -{ - struct iwl_priv *priv = hw->priv; - __le32 filter_or = 0, filter_nand = 0; - struct iwl_rxon_context *ctx; - -#define CHK(test, flag) do { \ - if (*total_flags & (test)) \ - filter_or |= (flag); \ - else \ - filter_nand |= (flag); \ - } while (0) - - IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n", - changed_flags, *total_flags); - - CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK); - /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */ - CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK); - CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); - -#undef CHK - - mutex_lock(&priv->shrd->mutex); - - for_each_context(priv, ctx) { - ctx->staging.filter_flags &= ~filter_nand; - ctx->staging.filter_flags |= filter_or; - - /* - * Not committing directly because hardware can perform a scan, - * but we'll eventually commit the filter flags change anyway. - */ - } - - mutex_unlock(&priv->shrd->mutex); - - /* - * Receiving all multicast frames is always enabled by the - * default flags setup in iwl_connection_init_rx_config() - * since we currently do not support programming multicast - * filters into the device. - */ - *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | - FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; -} - -static void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop) -{ - struct iwl_priv *priv = hw->priv; - - mutex_lock(&priv->shrd->mutex); - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status)) { - IWL_DEBUG_TX(priv, "Aborting flush due to device shutdown\n"); - goto done; - } - if (iwl_is_rfkill(priv->shrd)) { - IWL_DEBUG_TX(priv, "Aborting flush due to RF Kill\n"); - goto done; - } - - /* - * mac80211 will not push any more frames for transmit - * until the flush is completed - */ - if (drop) { - IWL_DEBUG_MAC80211(priv, "send flush command\n"); - if (iwlagn_txfifo_flush(priv, IWL_DROP_ALL)) { - IWL_ERR(priv, "flush request fail\n"); - goto done; - } - } - IWL_DEBUG_MAC80211(priv, "wait transmit/flush all frames\n"); - iwl_trans_wait_tx_queue_empty(trans(priv)); -done: - mutex_unlock(&priv->shrd->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -void iwlagn_disable_roc(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN]; - - lockdep_assert_held(&priv->shrd->mutex); - - if (!priv->hw_roc_setup) - return; - - ctx->staging.dev_type = RXON_DEV_TYPE_P2P; - ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - - priv->hw_roc_channel = NULL; - - memset(ctx->staging.node_addr, 0, ETH_ALEN); - - iwlagn_commit_rxon(priv, ctx); - - ctx->is_active = false; - priv->hw_roc_setup = false; -} - -static void iwlagn_disable_roc_work(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, - hw_roc_disable_work.work); - - mutex_lock(&priv->shrd->mutex); - iwlagn_disable_roc(priv); - mutex_unlock(&priv->shrd->mutex); -} - -static int iwlagn_mac_remain_on_channel(struct ieee80211_hw *hw, - struct ieee80211_channel *channel, - enum nl80211_channel_type channel_type, - int duration) -{ - struct iwl_priv *priv = hw->priv; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN]; - int err = 0; - - if (!(priv->shrd->valid_contexts & BIT(IWL_RXON_CTX_PAN))) - return -EOPNOTSUPP; - - if (!(ctx->interface_modes & BIT(NL80211_IFTYPE_P2P_CLIENT))) - return -EOPNOTSUPP; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - mutex_lock(&priv->shrd->mutex); - - if (test_bit(STATUS_SCAN_HW, &priv->shrd->status)) { - err = -EBUSY; - goto out; - } - - priv->hw_roc_channel = channel; - priv->hw_roc_chantype = channel_type; - priv->hw_roc_duration = duration; - priv->hw_roc_start_notified = false; - cancel_delayed_work(&priv->hw_roc_disable_work); - - if (!ctx->is_active) { - ctx->is_active = true; - ctx->staging.dev_type = RXON_DEV_TYPE_P2P; - memcpy(ctx->staging.node_addr, - priv->contexts[IWL_RXON_CTX_BSS].staging.node_addr, - ETH_ALEN); - memcpy(ctx->staging.bssid_addr, - priv->contexts[IWL_RXON_CTX_BSS].staging.node_addr, - ETH_ALEN); - err = iwlagn_commit_rxon(priv, ctx); - if (err) - goto out; - ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK | - RXON_FILTER_PROMISC_MSK | - RXON_FILTER_CTL2HOST_MSK; - - err = iwlagn_commit_rxon(priv, ctx); - if (err) { - iwlagn_disable_roc(priv); - goto out; - } - priv->hw_roc_setup = true; - } - - err = iwl_scan_initiate(priv, ctx->vif, IWL_SCAN_ROC, channel->band); - if (err) - iwlagn_disable_roc(priv); - - out: - mutex_unlock(&priv->shrd->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return err; -} - -static int iwlagn_mac_cancel_remain_on_channel(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - - if (!(priv->shrd->valid_contexts & BIT(IWL_RXON_CTX_PAN))) - return -EOPNOTSUPP; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - mutex_lock(&priv->shrd->mutex); - iwl_scan_cancel_timeout(priv, priv->hw_roc_duration); - iwlagn_disable_roc(priv); - mutex_unlock(&priv->shrd->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return 0; -} - -static int iwlagn_mac_tx_sync(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - const u8 *bssid, - enum ieee80211_tx_sync_type type) -{ - struct iwl_priv *priv = hw->priv; - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - struct iwl_rxon_context *ctx = vif_priv->ctx; - int ret; - u8 sta_id; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - mutex_lock(&priv->shrd->mutex); - - if (iwl_is_associated_ctx(ctx)) { - ret = 0; - goto out; - } - - if (ctx->preauth_bssid || test_bit(STATUS_SCAN_HW, &priv->shrd->status)) { - ret = -EBUSY; - goto out; - } - - ret = iwl_add_station_common(priv, ctx, bssid, true, NULL, &sta_id); - if (ret) - goto out; - - if (WARN_ON(sta_id != ctx->ap_sta_id)) { - ret = -EIO; - goto out_remove_sta; - } - - memcpy(ctx->bssid, bssid, ETH_ALEN); - ctx->preauth_bssid = true; - - ret = iwlagn_commit_rxon(priv, ctx); - - if (ret == 0) - goto out; - - out_remove_sta: - iwl_remove_station(priv, sta_id, bssid); - out: - mutex_unlock(&priv->shrd->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return ret; -} - -static void iwlagn_mac_finish_tx_sync(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - const u8 *bssid, - enum ieee80211_tx_sync_type type) -{ - struct iwl_priv *priv = hw->priv; - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - struct iwl_rxon_context *ctx = vif_priv->ctx; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - mutex_lock(&priv->shrd->mutex); - - if (iwl_is_associated_ctx(ctx)) - goto out; - - iwl_remove_station(priv, ctx->ap_sta_id, bssid); - ctx->preauth_bssid = false; - /* no need to commit */ - out: - mutex_unlock(&priv->shrd->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -/***************************************************************************** - * - * driver setup and teardown - * - *****************************************************************************/ - -static void iwl_setup_deferred_work(struct iwl_priv *priv) -{ - priv->shrd->workqueue = create_singlethread_workqueue(DRV_NAME); - - init_waitqueue_head(&priv->shrd->wait_command_queue); - - INIT_WORK(&priv->restart, iwl_bg_restart); - INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update); - INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work); - INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush); - INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency); - INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config); - INIT_DELAYED_WORK(&priv->hw_roc_disable_work, - iwlagn_disable_roc_work); - - iwl_setup_scan_deferred_work(priv); - - if (priv->cfg->lib->bt_setup_deferred_work) - priv->cfg->lib->bt_setup_deferred_work(priv); - - init_timer(&priv->statistics_periodic); - priv->statistics_periodic.data = (unsigned long)priv; - priv->statistics_periodic.function = iwl_bg_statistics_periodic; - - init_timer(&priv->ucode_trace); - priv->ucode_trace.data = (unsigned long)priv; - priv->ucode_trace.function = iwl_bg_ucode_trace; - - init_timer(&priv->watchdog); - priv->watchdog.data = (unsigned long)priv; - priv->watchdog.function = iwl_bg_watchdog; -} - -static void iwl_cancel_deferred_work(struct iwl_priv *priv) -{ - if (priv->cfg->lib->cancel_deferred_work) - priv->cfg->lib->cancel_deferred_work(priv); - - cancel_work_sync(&priv->run_time_calib_work); - cancel_work_sync(&priv->beacon_update); - - iwl_cancel_scan_deferred_work(priv); - - cancel_work_sync(&priv->bt_full_concurrency); - cancel_work_sync(&priv->bt_runtime_config); - cancel_delayed_work_sync(&priv->hw_roc_disable_work); - - del_timer_sync(&priv->statistics_periodic); - del_timer_sync(&priv->ucode_trace); -} - -static void iwl_init_hw_rates(struct iwl_priv *priv, - struct ieee80211_rate *rates) -{ - int i; - - for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) { - rates[i].bitrate = iwl_rates[i].ieee * 5; - rates[i].hw_value = i; /* Rate scaling will work on indexes */ - rates[i].hw_value_short = i; - rates[i].flags = 0; - if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) { - /* - * If CCK != 1M then set short preamble rate flag. - */ - rates[i].flags |= - (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ? - 0 : IEEE80211_RATE_SHORT_PREAMBLE; - } - } -} - -static int iwl_init_drv(struct iwl_priv *priv) -{ - int ret; - - spin_lock_init(&priv->shrd->sta_lock); - - mutex_init(&priv->shrd->mutex); - - priv->ieee_channels = NULL; - priv->ieee_rates = NULL; - priv->band = IEEE80211_BAND_2GHZ; - - priv->iw_mode = NL80211_IFTYPE_STATION; - priv->current_ht_config.smps = IEEE80211_SMPS_STATIC; - priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF; - priv->agg_tids_count = 0; - - /* initialize force reset */ - priv->force_reset[IWL_RF_RESET].reset_duration = - IWL_DELAY_NEXT_FORCE_RF_RESET; - priv->force_reset[IWL_FW_RESET].reset_duration = - IWL_DELAY_NEXT_FORCE_FW_RELOAD; - - priv->rx_statistics_jiffies = jiffies; - - /* Choose which receivers/antennas to use */ - iwlagn_set_rxon_chain(priv, &priv->contexts[IWL_RXON_CTX_BSS]); - - iwl_init_scan_params(priv); - - /* init bt coex */ - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist) { - priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT; - priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT; - priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK; - priv->bt_on_thresh = BT_ON_THRESHOLD_DEF; - priv->bt_duration = BT_DURATION_LIMIT_DEF; - priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF; - } - - ret = iwl_init_channel_map(priv); - if (ret) { - IWL_ERR(priv, "initializing regulatory failed: %d\n", ret); - goto err; - } - - ret = iwl_init_geos(priv); - if (ret) { - IWL_ERR(priv, "initializing geos failed: %d\n", ret); - goto err_free_channel_map; - } - iwl_init_hw_rates(priv, priv->ieee_rates); - - return 0; - -err_free_channel_map: - iwl_free_channel_map(priv); -err: - return ret; -} - -static void iwl_uninit_drv(struct iwl_priv *priv) -{ - iwl_calib_free_results(priv); - iwl_free_geos(priv); - iwl_free_channel_map(priv); - if (priv->tx_cmd_pool) - kmem_cache_destroy(priv->tx_cmd_pool); - kfree(priv->scan_cmd); - kfree(priv->beacon_cmd); -#ifdef CONFIG_IWLWIFI_DEBUGFS - kfree(priv->wowlan_sram); -#endif -} - -static void iwlagn_mac_rssi_callback(struct ieee80211_hw *hw, - enum ieee80211_rssi_event rssi_event) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - mutex_lock(&priv->shrd->mutex); - - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist) { - if (rssi_event == RSSI_EVENT_LOW) - priv->bt_enable_pspoll = true; - else if (rssi_event == RSSI_EVENT_HIGH) - priv->bt_enable_pspoll = false; - - iwlagn_send_advance_bt_config(priv); - } else { - IWL_DEBUG_MAC80211(priv, "Advanced BT coex disabled," - "ignoring RSSI callback\n"); - } - - mutex_unlock(&priv->shrd->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -static int iwlagn_mac_set_tim(struct ieee80211_hw *hw, - struct ieee80211_sta *sta, bool set) -{ - struct iwl_priv *priv = hw->priv; - - queue_work(priv->shrd->workqueue, &priv->beacon_update); - - return 0; -} - -struct ieee80211_ops iwlagn_hw_ops = { - .tx = iwlagn_mac_tx, - .start = iwlagn_mac_start, - .stop = iwlagn_mac_stop, -#ifdef CONFIG_PM_SLEEP - .suspend = iwlagn_mac_suspend, - .resume = iwlagn_mac_resume, -#endif - .add_interface = iwlagn_mac_add_interface, - .remove_interface = iwlagn_mac_remove_interface, - .change_interface = iwlagn_mac_change_interface, - .config = iwlagn_mac_config, - .configure_filter = iwlagn_configure_filter, - .set_key = iwlagn_mac_set_key, - .update_tkip_key = iwlagn_mac_update_tkip_key, - .set_rekey_data = iwlagn_mac_set_rekey_data, - .conf_tx = iwlagn_mac_conf_tx, - .bss_info_changed = iwlagn_bss_info_changed, - .ampdu_action = iwlagn_mac_ampdu_action, - .hw_scan = iwlagn_mac_hw_scan, - .sta_notify = iwlagn_mac_sta_notify, - .sta_add = iwlagn_mac_sta_add, - .sta_remove = iwlagn_mac_sta_remove, - .channel_switch = iwlagn_mac_channel_switch, - .flush = iwlagn_mac_flush, - .tx_last_beacon = iwlagn_mac_tx_last_beacon, - .remain_on_channel = iwlagn_mac_remain_on_channel, - .cancel_remain_on_channel = iwlagn_mac_cancel_remain_on_channel, - .rssi_callback = iwlagn_mac_rssi_callback, - CFG80211_TESTMODE_CMD(iwlagn_mac_testmode_cmd) - CFG80211_TESTMODE_DUMP(iwlagn_mac_testmode_dump) - .tx_sync = iwlagn_mac_tx_sync, - .finish_tx_sync = iwlagn_mac_finish_tx_sync, - .set_tim = iwlagn_mac_set_tim, -}; - -static u32 iwl_hw_detect(struct iwl_priv *priv) -{ - return iwl_read32(bus(priv), CSR_HW_REV); -} - -/* Size of one Rx buffer in host DRAM */ -#define IWL_RX_BUF_SIZE_4K (4 * 1024) -#define IWL_RX_BUF_SIZE_8K (8 * 1024) - -static int iwl_set_hw_params(struct iwl_priv *priv) -{ - if (iwlagn_mod_params.amsdu_size_8K) - hw_params(priv).rx_page_order = - get_order(IWL_RX_BUF_SIZE_8K); - else - hw_params(priv).rx_page_order = - get_order(IWL_RX_BUF_SIZE_4K); - - if (iwlagn_mod_params.disable_11n) - priv->cfg->sku &= ~EEPROM_SKU_CAP_11N_ENABLE; - - hw_params(priv).num_ampdu_queues = - priv->cfg->base_params->num_of_ampdu_queues; - hw_params(priv).shadow_reg_enable = - priv->cfg->base_params->shadow_reg_enable; - hw_params(priv).sku = priv->cfg->sku; - hw_params(priv).wd_timeout = priv->cfg->base_params->wd_timeout; - - /* Device-specific setup */ - return priv->cfg->lib->set_hw_params(priv); -} - -/* This function both allocates and initializes hw and priv. */ -static struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg) -{ - struct iwl_priv *priv; - /* mac80211 allocates memory for this device instance, including - * space for this driver's private structure */ - struct ieee80211_hw *hw; - - hw = ieee80211_alloc_hw(sizeof(struct iwl_priv), &iwlagn_hw_ops); - if (hw == NULL) { - pr_err("%s: Can not allocate network device\n", - cfg->name); - goto out; - } - - priv = hw->priv; - priv->hw = hw; - -out: - return hw; -} - -int iwl_probe(struct iwl_bus *bus, const struct iwl_trans_ops *trans_ops, - struct iwl_cfg *cfg) -{ - int err = 0; - struct iwl_priv *priv; - struct ieee80211_hw *hw; - u16 num_mac; - u32 hw_rev; - - /************************ - * 1. Allocating HW data - ************************/ - hw = iwl_alloc_all(cfg); - if (!hw) { - err = -ENOMEM; - goto out; - } - - priv = hw->priv; - priv->shrd = &priv->_shrd; - bus->shrd = priv->shrd; - priv->shrd->bus = bus; - priv->shrd->priv = priv; - - priv->shrd->trans = trans_ops->alloc(priv->shrd); - if (priv->shrd->trans == NULL) { - err = -ENOMEM; - goto out_free_traffic_mem; - } - - /* At this point both hw and priv are allocated. */ - - SET_IEEE80211_DEV(hw, bus(priv)->dev); - - IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n"); - priv->cfg = cfg; - - /* is antenna coupling more than 35dB ? */ - priv->bt_ant_couple_ok = - (iwlagn_mod_params.ant_coupling > - IWL_BT_ANTENNA_COUPLING_THRESHOLD) ? - true : false; - - /* enable/disable bt channel inhibition */ - priv->bt_ch_announce = iwlagn_mod_params.bt_ch_announce; - IWL_DEBUG_INFO(priv, "BT channel inhibition is %s\n", - (priv->bt_ch_announce) ? "On" : "Off"); - - if (iwl_alloc_traffic_mem(priv)) - IWL_ERR(priv, "Not enough memory to generate traffic log\n"); - - /* these spin locks will be used in apm_ops.init and EEPROM access - * we should init now - */ - spin_lock_init(&bus(priv)->reg_lock); - spin_lock_init(&priv->shrd->lock); - - /* - * stop and reset the on-board processor just in case it is in a - * strange state ... like being left stranded by a primary kernel - * and this is now the kdump kernel trying to start up - */ - iwl_write32(bus(priv), CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); - - /*********************** - * 3. Read REV register - ***********************/ - hw_rev = iwl_hw_detect(priv); - IWL_INFO(priv, "Detected %s, REV=0x%X\n", - priv->cfg->name, hw_rev); - - err = iwl_trans_request_irq(trans(priv)); - if (err) - goto out_free_trans; - - if (iwl_trans_prepare_card_hw(trans(priv))) { - err = -EIO; - IWL_WARN(priv, "Failed, HW not ready\n"); - goto out_free_trans; - } - - /***************** - * 4. Read EEPROM - *****************/ - /* Read the EEPROM */ - err = iwl_eeprom_init(priv, hw_rev); - if (err) { - IWL_ERR(priv, "Unable to init EEPROM\n"); - goto out_free_trans; - } - err = iwl_eeprom_check_version(priv); - if (err) - goto out_free_eeprom; - - err = iwl_eeprom_check_sku(priv); - if (err) - goto out_free_eeprom; - - /* extract MAC Address */ - iwl_eeprom_get_mac(priv, priv->addresses[0].addr); - IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr); - priv->hw->wiphy->addresses = priv->addresses; - priv->hw->wiphy->n_addresses = 1; - num_mac = iwl_eeprom_query16(priv, EEPROM_NUM_MAC_ADDRESS); - if (num_mac > 1) { - memcpy(priv->addresses[1].addr, priv->addresses[0].addr, - ETH_ALEN); - priv->addresses[1].addr[5]++; - priv->hw->wiphy->n_addresses++; - } - - /************************ - * 5. Setup HW constants - ************************/ - if (iwl_set_hw_params(priv)) { - err = -ENOENT; - IWL_ERR(priv, "failed to set hw parameters\n"); - goto out_free_eeprom; - } - - /******************* - * 6. Setup priv - *******************/ - - err = iwl_init_drv(priv); - if (err) - goto out_free_eeprom; - /* At this point both hw and priv are initialized. */ - - /******************** - * 7. Setup services - ********************/ - iwl_setup_deferred_work(priv); - iwl_setup_rx_handlers(priv); - iwl_testmode_init(priv); - - /********************************************* - * 8. Enable interrupts - *********************************************/ - - iwl_enable_rfkill_int(priv); - - /* If platform's RF_KILL switch is NOT set to KILL */ - if (iwl_read32(bus(priv), - CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) - clear_bit(STATUS_RF_KILL_HW, &priv->shrd->status); - else - set_bit(STATUS_RF_KILL_HW, &priv->shrd->status); - - wiphy_rfkill_set_hw_state(priv->hw->wiphy, - test_bit(STATUS_RF_KILL_HW, &priv->shrd->status)); - - iwl_power_initialize(priv); - iwl_tt_initialize(priv); - - init_completion(&priv->firmware_loading_complete); - - err = iwl_request_firmware(priv, true); - if (err) - goto out_destroy_workqueue; - - return 0; - -out_destroy_workqueue: - destroy_workqueue(priv->shrd->workqueue); - priv->shrd->workqueue = NULL; - iwl_uninit_drv(priv); -out_free_eeprom: - iwl_eeprom_free(priv); -out_free_trans: - iwl_trans_free(trans(priv)); -out_free_traffic_mem: - iwl_free_traffic_mem(priv); - ieee80211_free_hw(priv->hw); -out: - return err; -} - -void __devexit iwl_remove(struct iwl_priv * priv) -{ - wait_for_completion(&priv->firmware_loading_complete); - - IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n"); - - iwl_dbgfs_unregister(priv); - - /* ieee80211_unregister_hw call wil cause iwlagn_mac_stop to - * to be called and iwl_down since we are removing the device - * we need to set STATUS_EXIT_PENDING bit. - */ - set_bit(STATUS_EXIT_PENDING, &priv->shrd->status); - - iwl_testmode_cleanup(priv); - iwl_leds_exit(priv); - - if (priv->mac80211_registered) { - ieee80211_unregister_hw(priv->hw); - priv->mac80211_registered = 0; - } - - iwl_tt_exit(priv); - - /*This will stop the queues, move the device to low power state */ - iwl_trans_stop_device(trans(priv)); - - iwl_dealloc_ucode(priv); - - iwl_eeprom_free(priv); - - /*netif_stop_queue(dev); */ - flush_workqueue(priv->shrd->workqueue); - - /* ieee80211_unregister_hw calls iwlagn_mac_stop, which flushes - * priv->shrd->workqueue... so we can't take down the workqueue - * until now... */ - destroy_workqueue(priv->shrd->workqueue); - priv->shrd->workqueue = NULL; - iwl_free_traffic_mem(priv); - - iwl_trans_free(trans(priv)); - - iwl_uninit_drv(priv); - - dev_kfree_skb(priv->beacon_skb); - - ieee80211_free_hw(priv->hw); -} - - -/***************************************************************************** - * - * driver and module entry point - * - *****************************************************************************/ -static int __init iwl_init(void) -{ - - int ret; - pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); - pr_info(DRV_COPYRIGHT "\n"); - - ret = iwlagn_rate_control_register(); - if (ret) { - pr_err("Unable to register rate control algorithm: %d\n", ret); - return ret; - } - - ret = iwl_pci_register_driver(); - - if (ret) - goto error_register; - return ret; - -error_register: - iwlagn_rate_control_unregister(); - return ret; -} - -static void __exit iwl_exit(void) -{ - iwl_pci_unregister_driver(); - iwlagn_rate_control_unregister(); -} - -module_exit(iwl_exit); -module_init(iwl_init); - -#ifdef CONFIG_IWLWIFI_DEBUG -module_param_named(debug, iwlagn_mod_params.debug_level, uint, - S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "debug output mask"); -#endif - -module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO); -MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])"); -module_param_named(queues_num, iwlagn_mod_params.num_of_queues, int, S_IRUGO); -MODULE_PARM_DESC(queues_num, "number of hw queues."); -module_param_named(11n_disable, iwlagn_mod_params.disable_11n, int, S_IRUGO); -MODULE_PARM_DESC(11n_disable, "disable 11n functionality"); -module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K, - int, S_IRUGO); -MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size"); -module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO); -MODULE_PARM_DESC(fw_restart, "restart firmware in case of error"); - -module_param_named(ucode_alternative, - iwlagn_mod_params.wanted_ucode_alternative, - int, S_IRUGO); -MODULE_PARM_DESC(ucode_alternative, - "specify ucode alternative to use from ucode file"); - -module_param_named(antenna_coupling, iwlagn_mod_params.ant_coupling, - int, S_IRUGO); -MODULE_PARM_DESC(antenna_coupling, - "specify antenna coupling in dB (defualt: 0 dB)"); - -module_param_named(bt_ch_inhibition, iwlagn_mod_params.bt_ch_announce, - bool, S_IRUGO); -MODULE_PARM_DESC(bt_ch_inhibition, - "Enable BT channel inhibition (default: enable)"); - -module_param_named(plcp_check, iwlagn_mod_params.plcp_check, bool, S_IRUGO); -MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])"); - -module_param_named(ack_check, iwlagn_mod_params.ack_check, bool, S_IRUGO); -MODULE_PARM_DESC(ack_check, "Check ack health (default: 0 [disabled])"); - -module_param_named(wd_disable, iwlagn_mod_params.wd_disable, bool, S_IRUGO); -MODULE_PARM_DESC(wd_disable, - "Disable stuck queue watchdog timer (default: 0 [enabled])"); - -/* - * set bt_coex_active to true, uCode will do kill/defer - * every time the priority line is asserted (BT is sending signals on the - * priority line in the PCIx). - * set bt_coex_active to false, uCode will ignore the BT activity and - * perform the normal operation - * - * User might experience transmit issue on some platform due to WiFi/BT - * co-exist problem. The possible behaviors are: - * Able to scan and finding all the available AP - * Not able to associate with any AP - * On those platforms, WiFi communication can be restored by set - * "bt_coex_active" module parameter to "false" - * - * default: bt_coex_active = true (BT_COEX_ENABLE) - */ -module_param_named(bt_coex_active, iwlagn_mod_params.bt_coex_active, - bool, S_IRUGO); -MODULE_PARM_DESC(bt_coex_active, "enable wifi/bt co-exist (default: enable)"); - -module_param_named(led_mode, iwlagn_mod_params.led_mode, int, S_IRUGO); -MODULE_PARM_DESC(led_mode, "0=system default, " - "1=On(RF On)/Off(RF Off), 2=blinking (default: 0)"); - -module_param_named(power_save, iwlagn_mod_params.power_save, - bool, S_IRUGO); -MODULE_PARM_DESC(power_save, - "enable WiFi power management (default: disable)"); - -module_param_named(power_level, iwlagn_mod_params.power_level, - int, S_IRUGO); -MODULE_PARM_DESC(power_level, - "default power save level (range from 1 - 5, default: 1)"); - -module_param_named(auto_agg, iwlagn_mod_params.auto_agg, - bool, S_IRUGO); -MODULE_PARM_DESC(auto_agg, - "enable agg w/o check traffic load (default: enable)"); - -/* - * For now, keep using power level 1 instead of automatically - * adjusting ... - */ -module_param_named(no_sleep_autoadjust, iwlagn_mod_params.no_sleep_autoadjust, - bool, S_IRUGO); -MODULE_PARM_DESC(no_sleep_autoadjust, - "don't automatically adjust sleep level " - "according to maximum network latency (default: true)"); |