diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-agn-rs.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 3343 |
1 files changed, 0 insertions, 3343 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c deleted file mode 100644 index f450adc7236..00000000000 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ /dev/null @@ -1,3343 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/skbuff.h> -#include <linux/slab.h> -#include <linux/wireless.h> -#include <net/mac80211.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/delay.h> - -#include <linux/workqueue.h> - -#include "iwl-dev.h" -#include "iwl-sta.h" -#include "iwl-core.h" -#include "iwl-agn.h" - -#define RS_NAME "iwl-agn-rs" - -#define NUM_TRY_BEFORE_ANT_TOGGLE 1 -#define IWL_NUMBER_TRY 1 -#define IWL_HT_NUMBER_TRY 3 - -#define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */ -#define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */ -#define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */ - -/* max allowed rate miss before sync LQ cmd */ -#define IWL_MISSED_RATE_MAX 15 -/* max time to accum history 2 seconds */ -#define IWL_RATE_SCALE_FLUSH_INTVL (3*HZ) - -static u8 rs_ht_to_legacy[] = { - IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, - IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, - IWL_RATE_6M_INDEX, - IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX, - IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX, - IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX, - IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX -}; - -static const u8 ant_toggle_lookup[] = { - /*ANT_NONE -> */ ANT_NONE, - /*ANT_A -> */ ANT_B, - /*ANT_B -> */ ANT_C, - /*ANT_AB -> */ ANT_BC, - /*ANT_C -> */ ANT_A, - /*ANT_AC -> */ ANT_AB, - /*ANT_BC -> */ ANT_AC, - /*ANT_ABC -> */ ANT_ABC, -}; - -#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \ - [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ - IWL_RATE_SISO_##s##M_PLCP, \ - IWL_RATE_MIMO2_##s##M_PLCP,\ - IWL_RATE_MIMO3_##s##M_PLCP,\ - IWL_RATE_##r##M_IEEE, \ - IWL_RATE_##ip##M_INDEX, \ - IWL_RATE_##in##M_INDEX, \ - IWL_RATE_##rp##M_INDEX, \ - IWL_RATE_##rn##M_INDEX, \ - IWL_RATE_##pp##M_INDEX, \ - IWL_RATE_##np##M_INDEX } - -/* - * Parameter order: - * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate - * - * If there isn't a valid next or previous rate then INV is used which - * maps to IWL_RATE_INVALID - * - */ -const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = { - IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */ - IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */ - IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */ - IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */ - IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */ - IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */ - IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */ - IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */ - IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */ - IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */ - IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */ - IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */ - IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */ - /* FIXME:RS: ^^ should be INV (legacy) */ -}; - -static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags) -{ - int idx = 0; - - /* HT rate format */ - if (rate_n_flags & RATE_MCS_HT_MSK) { - idx = (rate_n_flags & 0xff); - - if (idx >= IWL_RATE_MIMO3_6M_PLCP) - idx = idx - IWL_RATE_MIMO3_6M_PLCP; - else if (idx >= IWL_RATE_MIMO2_6M_PLCP) - idx = idx - IWL_RATE_MIMO2_6M_PLCP; - - idx += IWL_FIRST_OFDM_RATE; - /* skip 9M not supported in ht*/ - if (idx >= IWL_RATE_9M_INDEX) - idx += 1; - if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE)) - return idx; - - /* legacy rate format, search for match in table */ - } else { - for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++) - if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF)) - return idx; - } - - return -1; -} - -static void rs_rate_scale_perform(struct iwl_priv *priv, - struct sk_buff *skb, - struct ieee80211_sta *sta, - struct iwl_lq_sta *lq_sta); -static void rs_fill_link_cmd(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, u32 rate_n_flags); -static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search); - - -#ifdef CONFIG_MAC80211_DEBUGFS -static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, - u32 *rate_n_flags, int index); -#else -static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, - u32 *rate_n_flags, int index) -{} -#endif - -/** - * The following tables contain the expected throughput metrics for all rates - * - * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits - * - * where invalid entries are zeros. - * - * CCK rates are only valid in legacy table and will only be used in G - * (2.4 GHz) band. - */ - -static s32 expected_tpt_legacy[IWL_RATE_COUNT] = { - 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0 -}; - -static s32 expected_tpt_siso20MHz[4][IWL_RATE_COUNT] = { - {0, 0, 0, 0, 42, 0, 76, 102, 124, 158, 183, 193, 202}, /* Norm */ - {0, 0, 0, 0, 46, 0, 82, 110, 132, 167, 192, 202, 210}, /* SGI */ - {0, 0, 0, 0, 48, 0, 93, 135, 176, 251, 319, 351, 381}, /* AGG */ - {0, 0, 0, 0, 53, 0, 102, 149, 193, 275, 348, 381, 413}, /* AGG+SGI */ -}; - -static s32 expected_tpt_siso40MHz[4][IWL_RATE_COUNT] = { - {0, 0, 0, 0, 77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */ - {0, 0, 0, 0, 83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */ - {0, 0, 0, 0, 96, 0, 182, 259, 328, 451, 553, 598, 640}, /* AGG */ - {0, 0, 0, 0, 106, 0, 199, 282, 357, 487, 593, 640, 683}, /* AGG+SGI */ -}; - -static s32 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = { - {0, 0, 0, 0, 74, 0, 123, 155, 179, 213, 235, 243, 250}, /* Norm */ - {0, 0, 0, 0, 81, 0, 131, 164, 187, 221, 242, 250, 256}, /* SGI */ - {0, 0, 0, 0, 92, 0, 175, 250, 317, 436, 534, 578, 619}, /* AGG */ - {0, 0, 0, 0, 102, 0, 192, 273, 344, 470, 573, 619, 660}, /* AGG+SGI*/ -}; - -static s32 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = { - {0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */ - {0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */ - {0, 0, 0, 0, 180, 0, 327, 446, 545, 708, 828, 878, 922}, /* AGG */ - {0, 0, 0, 0, 197, 0, 355, 481, 584, 752, 872, 922, 966}, /* AGG+SGI */ -}; - -static s32 expected_tpt_mimo3_20MHz[4][IWL_RATE_COUNT] = { - {0, 0, 0, 0, 99, 0, 153, 186, 208, 239, 256, 263, 268}, /* Norm */ - {0, 0, 0, 0, 106, 0, 162, 194, 215, 246, 262, 268, 273}, /* SGI */ - {0, 0, 0, 0, 134, 0, 249, 346, 431, 574, 685, 732, 775}, /* AGG */ - {0, 0, 0, 0, 148, 0, 272, 376, 465, 614, 727, 775, 818}, /* AGG+SGI */ -}; - -static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = { - {0, 0, 0, 0, 152, 0, 211, 239, 255, 279, 290, 294, 297}, /* Norm */ - {0, 0, 0, 0, 160, 0, 219, 245, 261, 284, 294, 297, 300}, /* SGI */ - {0, 0, 0, 0, 254, 0, 443, 584, 695, 868, 984, 1030, 1070}, /* AGG */ - {0, 0, 0, 0, 277, 0, 478, 624, 737, 911, 1026, 1070, 1109}, /* AGG+SGI */ -}; - -/* mbps, mcs */ -static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = { - { "1", "BPSK DSSS"}, - { "2", "QPSK DSSS"}, - {"5.5", "BPSK CCK"}, - { "11", "QPSK CCK"}, - { "6", "BPSK 1/2"}, - { "9", "BPSK 1/2"}, - { "12", "QPSK 1/2"}, - { "18", "QPSK 3/4"}, - { "24", "16QAM 1/2"}, - { "36", "16QAM 3/4"}, - { "48", "64QAM 2/3"}, - { "54", "64QAM 3/4"}, - { "60", "64QAM 5/6"}, -}; - -#define MCS_INDEX_PER_STREAM (8) - -static inline u8 rs_extract_rate(u32 rate_n_flags) -{ - return (u8)(rate_n_flags & 0xFF); -} - -static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window) -{ - window->data = 0; - window->success_counter = 0; - window->success_ratio = IWL_INVALID_VALUE; - window->counter = 0; - window->average_tpt = IWL_INVALID_VALUE; - window->stamp = 0; -} - -static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type) -{ - return (ant_type & valid_antenna) == ant_type; -} - -/* - * removes the old data from the statistics. All data that is older than - * TID_MAX_TIME_DIFF, will be deleted. - */ -static void rs_tl_rm_old_stats(struct iwl_traffic_load *tl, u32 curr_time) -{ - /* The oldest age we want to keep */ - u32 oldest_time = curr_time - TID_MAX_TIME_DIFF; - - while (tl->queue_count && - (tl->time_stamp < oldest_time)) { - tl->total -= tl->packet_count[tl->head]; - tl->packet_count[tl->head] = 0; - tl->time_stamp += TID_QUEUE_CELL_SPACING; - tl->queue_count--; - tl->head++; - if (tl->head >= TID_QUEUE_MAX_SIZE) - tl->head = 0; - } -} - -/* - * increment traffic load value for tid and also remove - * any old values if passed the certain time period - */ -static u8 rs_tl_add_packet(struct iwl_lq_sta *lq_data, - struct ieee80211_hdr *hdr) -{ - u32 curr_time = jiffies_to_msecs(jiffies); - u32 time_diff; - s32 index; - struct iwl_traffic_load *tl = NULL; - u8 tid; - - if (ieee80211_is_data_qos(hdr->frame_control)) { - u8 *qc = ieee80211_get_qos_ctl(hdr); - tid = qc[0] & 0xf; - } else - return MAX_TID_COUNT; - - if (unlikely(tid >= TID_MAX_LOAD_COUNT)) - return MAX_TID_COUNT; - - tl = &lq_data->load[tid]; - - curr_time -= curr_time % TID_ROUND_VALUE; - - /* Happens only for the first packet. Initialize the data */ - if (!(tl->queue_count)) { - tl->total = 1; - tl->time_stamp = curr_time; - tl->queue_count = 1; - tl->head = 0; - tl->packet_count[0] = 1; - return MAX_TID_COUNT; - } - - time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); - index = time_diff / TID_QUEUE_CELL_SPACING; - - /* The history is too long: remove data that is older than */ - /* TID_MAX_TIME_DIFF */ - if (index >= TID_QUEUE_MAX_SIZE) - rs_tl_rm_old_stats(tl, curr_time); - - index = (tl->head + index) % TID_QUEUE_MAX_SIZE; - tl->packet_count[index] = tl->packet_count[index] + 1; - tl->total = tl->total + 1; - - if ((index + 1) > tl->queue_count) - tl->queue_count = index + 1; - - return tid; -} - -/* - get the traffic load value for tid -*/ -static u32 rs_tl_get_load(struct iwl_lq_sta *lq_data, u8 tid) -{ - u32 curr_time = jiffies_to_msecs(jiffies); - u32 time_diff; - s32 index; - struct iwl_traffic_load *tl = NULL; - - if (tid >= TID_MAX_LOAD_COUNT) - return 0; - - tl = &(lq_data->load[tid]); - - curr_time -= curr_time % TID_ROUND_VALUE; - - if (!(tl->queue_count)) - return 0; - - time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); - index = time_diff / TID_QUEUE_CELL_SPACING; - - /* The history is too long: remove data that is older than */ - /* TID_MAX_TIME_DIFF */ - if (index >= TID_QUEUE_MAX_SIZE) - rs_tl_rm_old_stats(tl, curr_time); - - return tl->total; -} - -static int rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv, - struct iwl_lq_sta *lq_data, u8 tid, - struct ieee80211_sta *sta) -{ - int ret = -EAGAIN; - u32 load; - - /* - * Don't create TX aggregation sessions when in high - * BT traffic, as they would just be disrupted by BT. - */ - if (priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) { - IWL_ERR(priv, "BT traffic (%d), no aggregation allowed\n", - priv->bt_traffic_load); - return ret; - } - - load = rs_tl_get_load(lq_data, tid); - - if (load > IWL_AGG_LOAD_THRESHOLD) { - IWL_DEBUG_HT(priv, "Starting Tx agg: STA: %pM tid: %d\n", - sta->addr, tid); - ret = ieee80211_start_tx_ba_session(sta, tid); - if (ret == -EAGAIN) { - /* - * driver and mac80211 is out of sync - * this might be cause by reloading firmware - * stop the tx ba session here - */ - IWL_ERR(priv, "Fail start Tx agg on tid: %d\n", - tid); - ieee80211_stop_tx_ba_session(sta, tid); - } - } else { - IWL_ERR(priv, "Aggregation not enabled for tid %d " - "because load = %u\n", tid, load); - } - return ret; -} - -static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, - struct iwl_lq_sta *lq_data, - struct ieee80211_sta *sta) -{ - if (tid < TID_MAX_LOAD_COUNT) - rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); - else - IWL_ERR(priv, "tid exceeds max load count: %d/%d\n", - tid, TID_MAX_LOAD_COUNT); -} - -static inline int get_num_of_ant_from_rate(u32 rate_n_flags) -{ - return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) + - !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + - !!(rate_n_flags & RATE_MCS_ANT_C_MSK); -} - -/* - * Static function to get the expected throughput from an iwl_scale_tbl_info - * that wraps a NULL pointer check - */ -static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index) -{ - if (tbl->expected_tpt) - return tbl->expected_tpt[rs_index]; - return 0; -} - -/** - * rs_collect_tx_data - Update the success/failure sliding window - * - * We keep a sliding window of the last 62 packets transmitted - * at this rate. window->data contains the bitmask of successful - * packets. - */ -static int rs_collect_tx_data(struct iwl_scale_tbl_info *tbl, - int scale_index, int attempts, int successes) -{ - struct iwl_rate_scale_data *window = NULL; - static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1)); - s32 fail_count, tpt; - - if (scale_index < 0 || scale_index >= IWL_RATE_COUNT) - return -EINVAL; - - /* Select window for current tx bit rate */ - window = &(tbl->win[scale_index]); - - /* Get expected throughput */ - tpt = get_expected_tpt(tbl, scale_index); - - /* - * Keep track of only the latest 62 tx frame attempts in this rate's - * history window; anything older isn't really relevant any more. - * If we have filled up the sliding window, drop the oldest attempt; - * if the oldest attempt (highest bit in bitmap) shows "success", - * subtract "1" from the success counter (this is the main reason - * we keep these bitmaps!). - */ - while (attempts > 0) { - if (window->counter >= IWL_RATE_MAX_WINDOW) { - - /* remove earliest */ - window->counter = IWL_RATE_MAX_WINDOW - 1; - - if (window->data & mask) { - window->data &= ~mask; - window->success_counter--; - } - } - - /* Increment frames-attempted counter */ - window->counter++; - - /* Shift bitmap by one frame to throw away oldest history */ - window->data <<= 1; - - /* Mark the most recent #successes attempts as successful */ - if (successes > 0) { - window->success_counter++; - window->data |= 0x1; - successes--; - } - - attempts--; - } - - /* Calculate current success ratio, avoid divide-by-0! */ - if (window->counter > 0) - window->success_ratio = 128 * (100 * window->success_counter) - / window->counter; - else - window->success_ratio = IWL_INVALID_VALUE; - - fail_count = window->counter - window->success_counter; - - /* Calculate average throughput, if we have enough history. */ - if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) || - (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH)) - window->average_tpt = (window->success_ratio * tpt + 64) / 128; - else - window->average_tpt = IWL_INVALID_VALUE; - - /* Tag this window as having been updated */ - window->stamp = jiffies; - - return 0; -} - -/* - * Fill uCode API rate_n_flags field, based on "search" or "active" table. - */ -/* FIXME:RS:remove this function and put the flags statically in the table */ -static u32 rate_n_flags_from_tbl(struct iwl_priv *priv, - struct iwl_scale_tbl_info *tbl, - int index, u8 use_green) -{ - u32 rate_n_flags = 0; - - if (is_legacy(tbl->lq_type)) { - rate_n_flags = iwl_rates[index].plcp; - if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE) - rate_n_flags |= RATE_MCS_CCK_MSK; - - } else if (is_Ht(tbl->lq_type)) { - if (index > IWL_LAST_OFDM_RATE) { - IWL_ERR(priv, "Invalid HT rate index %d\n", index); - index = IWL_LAST_OFDM_RATE; - } - rate_n_flags = RATE_MCS_HT_MSK; - - if (is_siso(tbl->lq_type)) - rate_n_flags |= iwl_rates[index].plcp_siso; - else if (is_mimo2(tbl->lq_type)) - rate_n_flags |= iwl_rates[index].plcp_mimo2; - else - rate_n_flags |= iwl_rates[index].plcp_mimo3; - } else { - IWL_ERR(priv, "Invalid tbl->lq_type %d\n", tbl->lq_type); - } - - rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) & - RATE_MCS_ANT_ABC_MSK); - - if (is_Ht(tbl->lq_type)) { - if (tbl->is_ht40) { - if (tbl->is_dup) - rate_n_flags |= RATE_MCS_DUP_MSK; - else - rate_n_flags |= RATE_MCS_HT40_MSK; - } - if (tbl->is_SGI) - rate_n_flags |= RATE_MCS_SGI_MSK; - - if (use_green) { - rate_n_flags |= RATE_MCS_GF_MSK; - if (is_siso(tbl->lq_type) && tbl->is_SGI) { - rate_n_flags &= ~RATE_MCS_SGI_MSK; - IWL_ERR(priv, "GF was set with SGI:SISO\n"); - } - } - } - return rate_n_flags; -} - -/* - * Interpret uCode API's rate_n_flags format, - * fill "search" or "active" tx mode table. - */ -static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags, - enum ieee80211_band band, - struct iwl_scale_tbl_info *tbl, - int *rate_idx) -{ - u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK); - u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags); - u8 mcs; - - memset(tbl, 0, sizeof(struct iwl_scale_tbl_info)); - *rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags); - - if (*rate_idx == IWL_RATE_INVALID) { - *rate_idx = -1; - return -EINVAL; - } - tbl->is_SGI = 0; /* default legacy setup */ - tbl->is_ht40 = 0; - tbl->is_dup = 0; - tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS); - tbl->lq_type = LQ_NONE; - tbl->max_search = IWL_MAX_SEARCH; - - /* legacy rate format */ - if (!(rate_n_flags & RATE_MCS_HT_MSK)) { - if (num_of_ant == 1) { - if (band == IEEE80211_BAND_5GHZ) - tbl->lq_type = LQ_A; - else - tbl->lq_type = LQ_G; - } - /* HT rate format */ - } else { - if (rate_n_flags & RATE_MCS_SGI_MSK) - tbl->is_SGI = 1; - - if ((rate_n_flags & RATE_MCS_HT40_MSK) || - (rate_n_flags & RATE_MCS_DUP_MSK)) - tbl->is_ht40 = 1; - - if (rate_n_flags & RATE_MCS_DUP_MSK) - tbl->is_dup = 1; - - mcs = rs_extract_rate(rate_n_flags); - - /* SISO */ - if (mcs <= IWL_RATE_SISO_60M_PLCP) { - if (num_of_ant == 1) - tbl->lq_type = LQ_SISO; /*else NONE*/ - /* MIMO2 */ - } else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) { - if (num_of_ant == 2) - tbl->lq_type = LQ_MIMO2; - /* MIMO3 */ - } else { - if (num_of_ant == 3) { - tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; - tbl->lq_type = LQ_MIMO3; - } - } - } - return 0; -} - -/* switch to another antenna/antennas and return 1 */ -/* if no other valid antenna found, return 0 */ -static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags, - struct iwl_scale_tbl_info *tbl) -{ - u8 new_ant_type; - - if (!tbl->ant_type || tbl->ant_type > ANT_ABC) - return 0; - - if (!rs_is_valid_ant(valid_ant, tbl->ant_type)) - return 0; - - new_ant_type = ant_toggle_lookup[tbl->ant_type]; - - while ((new_ant_type != tbl->ant_type) && - !rs_is_valid_ant(valid_ant, new_ant_type)) - new_ant_type = ant_toggle_lookup[new_ant_type]; - - if (new_ant_type == tbl->ant_type) - return 0; - - tbl->ant_type = new_ant_type; - *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK; - *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS; - return 1; -} - -/** - * Green-field mode is valid if the station supports it and - * there are no non-GF stations present in the BSS. - */ -static bool rs_use_green(struct ieee80211_sta *sta) -{ - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - struct iwl_rxon_context *ctx = sta_priv->common.ctx; - - return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) && - !(ctx->ht.non_gf_sta_present); -} - -/** - * rs_get_supported_rates - get the available rates - * - * if management frame or broadcast frame only return - * basic available rates. - * - */ -static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta, - struct ieee80211_hdr *hdr, - enum iwl_table_type rate_type) -{ - if (is_legacy(rate_type)) { - return lq_sta->active_legacy_rate; - } else { - if (is_siso(rate_type)) - return lq_sta->active_siso_rate; - else if (is_mimo2(rate_type)) - return lq_sta->active_mimo2_rate; - else - return lq_sta->active_mimo3_rate; - } -} - -static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask, - int rate_type) -{ - u8 high = IWL_RATE_INVALID; - u8 low = IWL_RATE_INVALID; - - /* 802.11A or ht walks to the next literal adjacent rate in - * the rate table */ - if (is_a_band(rate_type) || !is_legacy(rate_type)) { - int i; - u32 mask; - - /* Find the previous rate that is in the rate mask */ - i = index - 1; - for (mask = (1 << i); i >= 0; i--, mask >>= 1) { - if (rate_mask & mask) { - low = i; - break; - } - } - - /* Find the next rate that is in the rate mask */ - i = index + 1; - for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) { - if (rate_mask & mask) { - high = i; - break; - } - } - - return (high << 8) | low; - } - - low = index; - while (low != IWL_RATE_INVALID) { - low = iwl_rates[low].prev_rs; - if (low == IWL_RATE_INVALID) - break; - if (rate_mask & (1 << low)) - break; - IWL_DEBUG_RATE(priv, "Skipping masked lower rate: %d\n", low); - } - - high = index; - while (high != IWL_RATE_INVALID) { - high = iwl_rates[high].next_rs; - if (high == IWL_RATE_INVALID) - break; - if (rate_mask & (1 << high)) - break; - IWL_DEBUG_RATE(priv, "Skipping masked higher rate: %d\n", high); - } - - return (high << 8) | low; -} - -static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta, - struct iwl_scale_tbl_info *tbl, - u8 scale_index, u8 ht_possible) -{ - s32 low; - u16 rate_mask; - u16 high_low; - u8 switch_to_legacy = 0; - u8 is_green = lq_sta->is_green; - struct iwl_priv *priv = lq_sta->drv; - - /* check if we need to switch from HT to legacy rates. - * assumption is that mandatory rates (1Mbps or 6Mbps) - * are always supported (spec demand) */ - if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) { - switch_to_legacy = 1; - scale_index = rs_ht_to_legacy[scale_index]; - if (lq_sta->band == IEEE80211_BAND_5GHZ) - tbl->lq_type = LQ_A; - else - tbl->lq_type = LQ_G; - - if (num_of_ant(tbl->ant_type) > 1) - tbl->ant_type = - first_antenna(priv->hw_params.valid_tx_ant); - - tbl->is_ht40 = 0; - tbl->is_SGI = 0; - tbl->max_search = IWL_MAX_SEARCH; - } - - rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type); - - /* Mask with station rate restriction */ - if (is_legacy(tbl->lq_type)) { - /* supp_rates has no CCK bits in A mode */ - if (lq_sta->band == IEEE80211_BAND_5GHZ) - rate_mask = (u16)(rate_mask & - (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); - else - rate_mask = (u16)(rate_mask & lq_sta->supp_rates); - } - - /* If we switched from HT to legacy, check current rate */ - if (switch_to_legacy && (rate_mask & (1 << scale_index))) { - low = scale_index; - goto out; - } - - high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask, - tbl->lq_type); - low = high_low & 0xff; - - if (low == IWL_RATE_INVALID) - low = scale_index; - -out: - return rate_n_flags_from_tbl(lq_sta->drv, tbl, low, is_green); -} - -/* - * Simple function to compare two rate scale table types - */ -static bool table_type_matches(struct iwl_scale_tbl_info *a, - struct iwl_scale_tbl_info *b) -{ - return (a->lq_type == b->lq_type) && (a->ant_type == b->ant_type) && - (a->is_SGI == b->is_SGI); -} - -static void rs_bt_update_lq(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - struct iwl_lq_sta *lq_sta) -{ - struct iwl_scale_tbl_info *tbl; - bool full_concurrent = priv->bt_full_concurrent; - unsigned long flags; - - if (priv->bt_ant_couple_ok) { - /* - * Is there a need to switch between - * full concurrency and 3-wire? - */ - spin_lock_irqsave(&priv->lock, flags); - if (priv->bt_ci_compliance && priv->bt_ant_couple_ok) - full_concurrent = true; - else - full_concurrent = false; - spin_unlock_irqrestore(&priv->lock, flags); - } - if ((priv->bt_traffic_load != priv->last_bt_traffic_load) || - (priv->bt_full_concurrent != full_concurrent)) { - priv->bt_full_concurrent = full_concurrent; - - /* Update uCode's rate table. */ - tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - rs_fill_link_cmd(priv, lq_sta, tbl->current_rate); - iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false); - - queue_work(priv->workqueue, &priv->bt_full_concurrency); - } -} - -/* - * mac80211 sends us Tx status - */ -static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb) -{ - int legacy_success; - int retries; - int rs_index, mac_index, i; - struct iwl_lq_sta *lq_sta = priv_sta; - struct iwl_link_quality_cmd *table; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct iwl_priv *priv = (struct iwl_priv *)priv_r; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - enum mac80211_rate_control_flags mac_flags; - u32 tx_rate; - struct iwl_scale_tbl_info tbl_type; - struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl; - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - struct iwl_rxon_context *ctx = sta_priv->common.ctx; - - IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n"); - - /* Treat uninitialized rate scaling data same as non-existing. */ - if (!lq_sta) { - IWL_DEBUG_RATE(priv, "Station rate scaling not created yet.\n"); - return; - } else if (!lq_sta->drv) { - IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n"); - return; - } - - if (!ieee80211_is_data(hdr->frame_control) || - info->flags & IEEE80211_TX_CTL_NO_ACK) - return; - - /* This packet was aggregated but doesn't carry status info */ - if ((info->flags & IEEE80211_TX_CTL_AMPDU) && - !(info->flags & IEEE80211_TX_STAT_AMPDU)) - return; - - /* - * Ignore this Tx frame response if its initial rate doesn't match - * that of latest Link Quality command. There may be stragglers - * from a previous Link Quality command, but we're no longer interested - * in those; they're either from the "active" mode while we're trying - * to check "search" mode, or a prior "search" mode after we've moved - * to a new "search" mode (which might become the new "active" mode). - */ - table = &lq_sta->lq; - tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags); - rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index); - if (priv->band == IEEE80211_BAND_5GHZ) - rs_index -= IWL_FIRST_OFDM_RATE; - mac_flags = info->status.rates[0].flags; - mac_index = info->status.rates[0].idx; - /* For HT packets, map MCS to PLCP */ - if (mac_flags & IEEE80211_TX_RC_MCS) { - mac_index &= RATE_MCS_CODE_MSK; /* Remove # of streams */ - if (mac_index >= (IWL_RATE_9M_INDEX - IWL_FIRST_OFDM_RATE)) - mac_index++; - /* - * mac80211 HT index is always zero-indexed; we need to move - * HT OFDM rates after CCK rates in 2.4 GHz band - */ - if (priv->band == IEEE80211_BAND_2GHZ) - mac_index += IWL_FIRST_OFDM_RATE; - } - /* Here we actually compare this rate to the latest LQ command */ - if ((mac_index < 0) || - (tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI)) || - (tbl_type.is_ht40 != !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) || - (tbl_type.is_dup != !!(mac_flags & IEEE80211_TX_RC_DUP_DATA)) || - (tbl_type.ant_type != info->antenna_sel_tx) || - (!!(tx_rate & RATE_MCS_HT_MSK) != !!(mac_flags & IEEE80211_TX_RC_MCS)) || - (!!(tx_rate & RATE_MCS_GF_MSK) != !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD)) || - (rs_index != mac_index)) { - IWL_DEBUG_RATE(priv, "initial rate %d does not match %d (0x%x)\n", mac_index, rs_index, tx_rate); - /* - * Since rates mis-match, the last LQ command may have failed. - * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with - * ... driver. - */ - lq_sta->missed_rate_counter++; - if (lq_sta->missed_rate_counter > IWL_MISSED_RATE_MAX) { - lq_sta->missed_rate_counter = 0; - iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false); - } - /* Regardless, ignore this status info for outdated rate */ - return; - } else - /* Rate did match, so reset the missed_rate_counter */ - lq_sta->missed_rate_counter = 0; - - /* Figure out if rate scale algorithm is in active or search table */ - if (table_type_matches(&tbl_type, - &(lq_sta->lq_info[lq_sta->active_tbl]))) { - curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); - } else if (table_type_matches(&tbl_type, - &lq_sta->lq_info[1 - lq_sta->active_tbl])) { - curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); - other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - } else { - IWL_DEBUG_RATE(priv, "Neither active nor search matches tx rate\n"); - tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - IWL_DEBUG_RATE(priv, "active- lq:%x, ant:%x, SGI:%d\n", - tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI); - tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); - IWL_DEBUG_RATE(priv, "search- lq:%x, ant:%x, SGI:%d\n", - tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI); - IWL_DEBUG_RATE(priv, "actual- lq:%x, ant:%x, SGI:%d\n", - tbl_type.lq_type, tbl_type.ant_type, tbl_type.is_SGI); - /* - * no matching table found, let's by-pass the data collection - * and continue to perform rate scale to find the rate table - */ - rs_stay_in_table(lq_sta, true); - goto done; - } - - /* - * Updating the frame history depends on whether packets were - * aggregated. - * - * For aggregation, all packets were transmitted at the same rate, the - * first index into rate scale table. - */ - if (info->flags & IEEE80211_TX_STAT_AMPDU) { - tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags); - rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, - &rs_index); - rs_collect_tx_data(curr_tbl, rs_index, - info->status.ampdu_len, - info->status.ampdu_ack_len); - - /* Update success/fail counts if not searching for new mode */ - if (lq_sta->stay_in_tbl) { - lq_sta->total_success += info->status.ampdu_ack_len; - lq_sta->total_failed += (info->status.ampdu_len - - info->status.ampdu_ack_len); - } - } else { - /* - * For legacy, update frame history with for each Tx retry. - */ - retries = info->status.rates[0].count - 1; - /* HW doesn't send more than 15 retries */ - retries = min(retries, 15); - - /* The last transmission may have been successful */ - legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK); - /* Collect data for each rate used during failed TX attempts */ - for (i = 0; i <= retries; ++i) { - tx_rate = le32_to_cpu(table->rs_table[i].rate_n_flags); - rs_get_tbl_info_from_mcs(tx_rate, priv->band, - &tbl_type, &rs_index); - /* - * Only collect stats if retried rate is in the same RS - * table as active/search. - */ - if (table_type_matches(&tbl_type, curr_tbl)) - tmp_tbl = curr_tbl; - else if (table_type_matches(&tbl_type, other_tbl)) - tmp_tbl = other_tbl; - else - continue; - rs_collect_tx_data(tmp_tbl, rs_index, 1, - i < retries ? 0 : legacy_success); - } - - /* Update success/fail counts if not searching for new mode */ - if (lq_sta->stay_in_tbl) { - lq_sta->total_success += legacy_success; - lq_sta->total_failed += retries + (1 - legacy_success); - } - } - /* The last TX rate is cached in lq_sta; it's set in if/else above */ - lq_sta->last_rate_n_flags = tx_rate; -done: - /* See if there's a better rate or modulation mode to try. */ - if (sta && sta->supp_rates[sband->band]) - rs_rate_scale_perform(priv, skb, sta, lq_sta); - - if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist) - rs_bt_update_lq(priv, ctx, lq_sta); -} - -/* - * Begin a period of staying with a selected modulation mode. - * Set "stay_in_tbl" flag to prevent any mode switches. - * Set frame tx success limits according to legacy vs. high-throughput, - * and reset overall (spanning all rates) tx success history statistics. - * These control how long we stay using same modulation mode before - * searching for a new mode. - */ -static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy, - struct iwl_lq_sta *lq_sta) -{ - IWL_DEBUG_RATE(priv, "we are staying in the same table\n"); - lq_sta->stay_in_tbl = 1; /* only place this gets set */ - if (is_legacy) { - lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT; - lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT; - lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT; - } else { - lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT; - lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT; - lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT; - } - lq_sta->table_count = 0; - lq_sta->total_failed = 0; - lq_sta->total_success = 0; - lq_sta->flush_timer = jiffies; - lq_sta->action_counter = 0; -} - -/* - * Find correct throughput table for given mode of modulation - */ -static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta, - struct iwl_scale_tbl_info *tbl) -{ - /* Used to choose among HT tables */ - s32 (*ht_tbl_pointer)[IWL_RATE_COUNT]; - - /* Check for invalid LQ type */ - if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) { - tbl->expected_tpt = expected_tpt_legacy; - return; - } - - /* Legacy rates have only one table */ - if (is_legacy(tbl->lq_type)) { - tbl->expected_tpt = expected_tpt_legacy; - return; - } - - /* Choose among many HT tables depending on number of streams - * (SISO/MIMO2/MIMO3), channel width (20/40), SGI, and aggregation - * status */ - if (is_siso(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup)) - ht_tbl_pointer = expected_tpt_siso20MHz; - else if (is_siso(tbl->lq_type)) - ht_tbl_pointer = expected_tpt_siso40MHz; - else if (is_mimo2(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup)) - ht_tbl_pointer = expected_tpt_mimo2_20MHz; - else if (is_mimo2(tbl->lq_type)) - ht_tbl_pointer = expected_tpt_mimo2_40MHz; - else if (is_mimo3(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup)) - ht_tbl_pointer = expected_tpt_mimo3_20MHz; - else /* if (is_mimo3(tbl->lq_type)) <-- must be true */ - ht_tbl_pointer = expected_tpt_mimo3_40MHz; - - if (!tbl->is_SGI && !lq_sta->is_agg) /* Normal */ - tbl->expected_tpt = ht_tbl_pointer[0]; - else if (tbl->is_SGI && !lq_sta->is_agg) /* SGI */ - tbl->expected_tpt = ht_tbl_pointer[1]; - else if (!tbl->is_SGI && lq_sta->is_agg) /* AGG */ - tbl->expected_tpt = ht_tbl_pointer[2]; - else /* AGG+SGI */ - tbl->expected_tpt = ht_tbl_pointer[3]; -} - -/* - * Find starting rate for new "search" high-throughput mode of modulation. - * Goal is to find lowest expected rate (under perfect conditions) that is - * above the current measured throughput of "active" mode, to give new mode - * a fair chance to prove itself without too many challenges. - * - * This gets called when transitioning to more aggressive modulation - * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive - * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need - * to decrease to match "active" throughput. When moving from MIMO to SISO, - * bit rate will typically need to increase, but not if performance was bad. - */ -static s32 rs_get_best_rate(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, - struct iwl_scale_tbl_info *tbl, /* "search" */ - u16 rate_mask, s8 index) -{ - /* "active" values */ - struct iwl_scale_tbl_info *active_tbl = - &(lq_sta->lq_info[lq_sta->active_tbl]); - s32 active_sr = active_tbl->win[index].success_ratio; - s32 active_tpt = active_tbl->expected_tpt[index]; - - /* expected "search" throughput */ - s32 *tpt_tbl = tbl->expected_tpt; - - s32 new_rate, high, low, start_hi; - u16 high_low; - s8 rate = index; - - new_rate = high = low = start_hi = IWL_RATE_INVALID; - - for (; ;) { - high_low = rs_get_adjacent_rate(priv, rate, rate_mask, - tbl->lq_type); - - low = high_low & 0xff; - high = (high_low >> 8) & 0xff; - - /* - * Lower the "search" bit rate, to give new "search" mode - * approximately the same throughput as "active" if: - * - * 1) "Active" mode has been working modestly well (but not - * great), and expected "search" throughput (under perfect - * conditions) at candidate rate is above the actual - * measured "active" throughput (but less than expected - * "active" throughput under perfect conditions). - * OR - * 2) "Active" mode has been working perfectly or very well - * and expected "search" throughput (under perfect - * conditions) at candidate rate is above expected - * "active" throughput (under perfect conditions). - */ - if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) && - ((active_sr > IWL_RATE_DECREASE_TH) && - (active_sr <= IWL_RATE_HIGH_TH) && - (tpt_tbl[rate] <= active_tpt))) || - ((active_sr >= IWL_RATE_SCALE_SWITCH) && - (tpt_tbl[rate] > active_tpt))) { - - /* (2nd or later pass) - * If we've already tried to raise the rate, and are - * now trying to lower it, use the higher rate. */ - if (start_hi != IWL_RATE_INVALID) { - new_rate = start_hi; - break; - } - - new_rate = rate; - - /* Loop again with lower rate */ - if (low != IWL_RATE_INVALID) - rate = low; - - /* Lower rate not available, use the original */ - else - break; - - /* Else try to raise the "search" rate to match "active" */ - } else { - /* (2nd or later pass) - * If we've already tried to lower the rate, and are - * now trying to raise it, use the lower rate. */ - if (new_rate != IWL_RATE_INVALID) - break; - - /* Loop again with higher rate */ - else if (high != IWL_RATE_INVALID) { - start_hi = high; - rate = high; - - /* Higher rate not available, use the original */ - } else { - new_rate = rate; - break; - } - } - } - - return new_rate; -} - -/* - * Set up search table for MIMO2 - */ -static int rs_switch_to_mimo2(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct ieee80211_sta *sta, - struct iwl_scale_tbl_info *tbl, int index) -{ - u16 rate_mask; - s32 rate; - s8 is_green = lq_sta->is_green; - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - struct iwl_rxon_context *ctx = sta_priv->common.ctx; - - if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) - return -1; - - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) - == WLAN_HT_CAP_SM_PS_STATIC) - return -1; - - /* Need both Tx chains/antennas to support MIMO */ - if (priv->hw_params.tx_chains_num < 2) - return -1; - - IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO2\n"); - - tbl->lq_type = LQ_MIMO2; - tbl->is_dup = lq_sta->is_dup; - tbl->action = 0; - tbl->max_search = IWL_MAX_SEARCH; - rate_mask = lq_sta->active_mimo2_rate; - - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) - tbl->is_ht40 = 1; - else - tbl->is_ht40 = 0; - - rs_set_expected_tpt_table(lq_sta, tbl); - - rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); - - IWL_DEBUG_RATE(priv, "LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask); - if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { - IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n", - rate, rate_mask); - return -1; - } - tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green); - - IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n", - tbl->current_rate, is_green); - return 0; -} - -/* - * Set up search table for MIMO3 - */ -static int rs_switch_to_mimo3(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct ieee80211_sta *sta, - struct iwl_scale_tbl_info *tbl, int index) -{ - u16 rate_mask; - s32 rate; - s8 is_green = lq_sta->is_green; - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - struct iwl_rxon_context *ctx = sta_priv->common.ctx; - - if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) - return -1; - - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) - == WLAN_HT_CAP_SM_PS_STATIC) - return -1; - - /* Need both Tx chains/antennas to support MIMO */ - if (priv->hw_params.tx_chains_num < 3) - return -1; - - IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO3\n"); - - tbl->lq_type = LQ_MIMO3; - tbl->is_dup = lq_sta->is_dup; - tbl->action = 0; - tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; - rate_mask = lq_sta->active_mimo3_rate; - - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) - tbl->is_ht40 = 1; - else - tbl->is_ht40 = 0; - - rs_set_expected_tpt_table(lq_sta, tbl); - - rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); - - IWL_DEBUG_RATE(priv, "LQ: MIMO3 best rate %d mask %X\n", - rate, rate_mask); - if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { - IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n", - rate, rate_mask); - return -1; - } - tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green); - - IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n", - tbl->current_rate, is_green); - return 0; -} - -/* - * Set up search table for SISO - */ -static int rs_switch_to_siso(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct ieee80211_sta *sta, - struct iwl_scale_tbl_info *tbl, int index) -{ - u16 rate_mask; - u8 is_green = lq_sta->is_green; - s32 rate; - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - struct iwl_rxon_context *ctx = sta_priv->common.ctx; - - if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) - return -1; - - IWL_DEBUG_RATE(priv, "LQ: try to switch to SISO\n"); - - tbl->is_dup = lq_sta->is_dup; - tbl->lq_type = LQ_SISO; - tbl->action = 0; - tbl->max_search = IWL_MAX_SEARCH; - rate_mask = lq_sta->active_siso_rate; - - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) - tbl->is_ht40 = 1; - else - tbl->is_ht40 = 0; - - if (is_green) - tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/ - - rs_set_expected_tpt_table(lq_sta, tbl); - rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); - - IWL_DEBUG_RATE(priv, "LQ: get best rate %d mask %X\n", rate, rate_mask); - if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { - IWL_DEBUG_RATE(priv, "can not switch with index %d rate mask %x\n", - rate, rate_mask); - return -1; - } - tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green); - IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n", - tbl->current_rate, is_green); - return 0; -} - -/* - * Try to switch to new modulation mode from legacy - */ -static int rs_move_legacy_other(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct ieee80211_sta *sta, - int index) -{ - struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - struct iwl_rate_scale_data *window = &(tbl->win[index]); - u32 sz = (sizeof(struct iwl_scale_tbl_info) - - (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action; - u8 valid_tx_ant = priv->hw_params.valid_tx_ant; - u8 tx_chains_num = priv->hw_params.tx_chains_num; - int ret = 0; - u8 update_search_tbl_counter = 0; - - switch (priv->bt_traffic_load) { - case IWL_BT_COEX_TRAFFIC_LOAD_NONE: - /* nothing */ - break; - case IWL_BT_COEX_TRAFFIC_LOAD_LOW: - /* avoid antenna B unless MIMO */ - valid_tx_ant = first_antenna(priv->hw_params.valid_tx_ant); - if (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2) - tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; - break; - case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: - case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: - /* avoid antenna B and MIMO */ - valid_tx_ant = first_antenna(priv->hw_params.valid_tx_ant); - if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2 && - tbl->action != IWL_LEGACY_SWITCH_SISO) - tbl->action = IWL_LEGACY_SWITCH_SISO; - break; - default: - IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load); - break; - } - - if (!iwl_ht_enabled(priv)) - /* stay in Legacy */ - tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; - else if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE && - tbl->action > IWL_LEGACY_SWITCH_SISO) - tbl->action = IWL_LEGACY_SWITCH_SISO; - - /* configure as 1x1 if bt full concurrency */ - if (priv->bt_full_concurrent) { - if (!iwl_ht_enabled(priv)) - tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; - else if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2) - tbl->action = IWL_LEGACY_SWITCH_SISO; - valid_tx_ant = first_antenna(priv->hw_params.valid_tx_ant); - } - - start_action = tbl->action; - for (; ;) { - lq_sta->action_counter++; - switch (tbl->action) { - case IWL_LEGACY_SWITCH_ANTENNA1: - case IWL_LEGACY_SWITCH_ANTENNA2: - IWL_DEBUG_RATE(priv, "LQ: Legacy toggle Antenna\n"); - - if ((tbl->action == IWL_LEGACY_SWITCH_ANTENNA1 && - tx_chains_num <= 1) || - (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2 && - tx_chains_num <= 2)) - break; - - /* Don't change antenna if success has been great */ - if (window->success_ratio >= IWL_RS_GOOD_RATIO && - !priv->bt_full_concurrent && - priv->bt_traffic_load == - IWL_BT_COEX_TRAFFIC_LOAD_NONE) - break; - - /* Set up search table to try other antenna */ - memcpy(search_tbl, tbl, sz); - - if (rs_toggle_antenna(valid_tx_ant, - &search_tbl->current_rate, search_tbl)) { - update_search_tbl_counter = 1; - rs_set_expected_tpt_table(lq_sta, search_tbl); - goto out; - } - break; - case IWL_LEGACY_SWITCH_SISO: - IWL_DEBUG_RATE(priv, "LQ: Legacy switch to SISO\n"); - - /* Set up search table to try SISO */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - ret = rs_switch_to_siso(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->action_counter = 0; - goto out; - } - - break; - case IWL_LEGACY_SWITCH_MIMO2_AB: - case IWL_LEGACY_SWITCH_MIMO2_AC: - case IWL_LEGACY_SWITCH_MIMO2_BC: - IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO2\n"); - - /* Set up search table to try MIMO */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - - if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AB) - search_tbl->ant_type = ANT_AB; - else if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AC) - search_tbl->ant_type = ANT_AC; - else - search_tbl->ant_type = ANT_BC; - - if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) - break; - - ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->action_counter = 0; - goto out; - } - break; - - case IWL_LEGACY_SWITCH_MIMO3_ABC: - IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO3\n"); - - /* Set up search table to try MIMO3 */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - - search_tbl->ant_type = ANT_ABC; - - if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) - break; - - ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->action_counter = 0; - goto out; - } - break; - } - tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) - tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; - - if (tbl->action == start_action) - break; - - } - search_tbl->lq_type = LQ_NONE; - return 0; - -out: - lq_sta->search_better_tbl = 1; - tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) - tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; - if (update_search_tbl_counter) - search_tbl->action = tbl->action; - return 0; - -} - -/* - * Try to switch to new modulation mode from SISO - */ -static int rs_move_siso_to_other(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct ieee80211_sta *sta, int index) -{ - u8 is_green = lq_sta->is_green; - struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - struct iwl_rate_scale_data *window = &(tbl->win[index]); - struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; - u32 sz = (sizeof(struct iwl_scale_tbl_info) - - (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action; - u8 valid_tx_ant = priv->hw_params.valid_tx_ant; - u8 tx_chains_num = priv->hw_params.tx_chains_num; - u8 update_search_tbl_counter = 0; - int ret; - - switch (priv->bt_traffic_load) { - case IWL_BT_COEX_TRAFFIC_LOAD_NONE: - /* nothing */ - break; - case IWL_BT_COEX_TRAFFIC_LOAD_LOW: - /* avoid antenna B unless MIMO */ - valid_tx_ant = first_antenna(priv->hw_params.valid_tx_ant); - if (tbl->action == IWL_SISO_SWITCH_ANTENNA2) - tbl->action = IWL_SISO_SWITCH_ANTENNA1; - break; - case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: - case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: - /* avoid antenna B and MIMO */ - valid_tx_ant = first_antenna(priv->hw_params.valid_tx_ant); - if (tbl->action != IWL_SISO_SWITCH_ANTENNA1) - tbl->action = IWL_SISO_SWITCH_ANTENNA1; - break; - default: - IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load); - break; - } - - if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE && - tbl->action > IWL_SISO_SWITCH_ANTENNA2) { - /* stay in SISO */ - tbl->action = IWL_SISO_SWITCH_ANTENNA1; - } - - /* configure as 1x1 if bt full concurrency */ - if (priv->bt_full_concurrent) { - valid_tx_ant = first_antenna(priv->hw_params.valid_tx_ant); - if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2) - tbl->action = IWL_SISO_SWITCH_ANTENNA1; - } - - start_action = tbl->action; - for (;;) { - lq_sta->action_counter++; - switch (tbl->action) { - case IWL_SISO_SWITCH_ANTENNA1: - case IWL_SISO_SWITCH_ANTENNA2: - IWL_DEBUG_RATE(priv, "LQ: SISO toggle Antenna\n"); - if ((tbl->action == IWL_SISO_SWITCH_ANTENNA1 && - tx_chains_num <= 1) || - (tbl->action == IWL_SISO_SWITCH_ANTENNA2 && - tx_chains_num <= 2)) - break; - - if (window->success_ratio >= IWL_RS_GOOD_RATIO && - !priv->bt_full_concurrent && - priv->bt_traffic_load == - IWL_BT_COEX_TRAFFIC_LOAD_NONE) - break; - - memcpy(search_tbl, tbl, sz); - if (rs_toggle_antenna(valid_tx_ant, - &search_tbl->current_rate, search_tbl)) { - update_search_tbl_counter = 1; - goto out; - } - break; - case IWL_SISO_SWITCH_MIMO2_AB: - case IWL_SISO_SWITCH_MIMO2_AC: - case IWL_SISO_SWITCH_MIMO2_BC: - IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO2\n"); - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - - if (tbl->action == IWL_SISO_SWITCH_MIMO2_AB) - search_tbl->ant_type = ANT_AB; - else if (tbl->action == IWL_SISO_SWITCH_MIMO2_AC) - search_tbl->ant_type = ANT_AC; - else - search_tbl->ant_type = ANT_BC; - - if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) - break; - - ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) - goto out; - break; - case IWL_SISO_SWITCH_GI: - if (!tbl->is_ht40 && !(ht_cap->cap & - IEEE80211_HT_CAP_SGI_20)) - break; - if (tbl->is_ht40 && !(ht_cap->cap & - IEEE80211_HT_CAP_SGI_40)) - break; - - IWL_DEBUG_RATE(priv, "LQ: SISO toggle SGI/NGI\n"); - - memcpy(search_tbl, tbl, sz); - if (is_green) { - if (!tbl->is_SGI) - break; - else - IWL_ERR(priv, - "SGI was set in GF+SISO\n"); - } - search_tbl->is_SGI = !tbl->is_SGI; - rs_set_expected_tpt_table(lq_sta, search_tbl); - if (tbl->is_SGI) { - s32 tpt = lq_sta->last_tpt / 100; - if (tpt >= search_tbl->expected_tpt[index]) - break; - } - search_tbl->current_rate = - rate_n_flags_from_tbl(priv, search_tbl, - index, is_green); - update_search_tbl_counter = 1; - goto out; - case IWL_SISO_SWITCH_MIMO3_ABC: - IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO3\n"); - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - search_tbl->ant_type = ANT_ABC; - - if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) - break; - - ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) - goto out; - break; - } - tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) - tbl->action = IWL_SISO_SWITCH_ANTENNA1; - - if (tbl->action == start_action) - break; - } - search_tbl->lq_type = LQ_NONE; - return 0; - - out: - lq_sta->search_better_tbl = 1; - tbl->action++; - if (tbl->action > IWL_SISO_SWITCH_MIMO3_ABC) - tbl->action = IWL_SISO_SWITCH_ANTENNA1; - if (update_search_tbl_counter) - search_tbl->action = tbl->action; - - return 0; -} - -/* - * Try to switch to new modulation mode from MIMO2 - */ -static int rs_move_mimo2_to_other(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct ieee80211_sta *sta, int index) -{ - s8 is_green = lq_sta->is_green; - struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - struct iwl_rate_scale_data *window = &(tbl->win[index]); - struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; - u32 sz = (sizeof(struct iwl_scale_tbl_info) - - (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action; - u8 valid_tx_ant = priv->hw_params.valid_tx_ant; - u8 tx_chains_num = priv->hw_params.tx_chains_num; - u8 update_search_tbl_counter = 0; - int ret; - - switch (priv->bt_traffic_load) { - case IWL_BT_COEX_TRAFFIC_LOAD_NONE: - /* nothing */ - break; - case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: - case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: - /* avoid antenna B and MIMO */ - if (tbl->action != IWL_MIMO2_SWITCH_SISO_A) - tbl->action = IWL_MIMO2_SWITCH_SISO_A; - break; - case IWL_BT_COEX_TRAFFIC_LOAD_LOW: - /* avoid antenna B unless MIMO */ - if (tbl->action == IWL_MIMO2_SWITCH_SISO_B || - tbl->action == IWL_MIMO2_SWITCH_SISO_C) - tbl->action = IWL_MIMO2_SWITCH_SISO_A; - break; - default: - IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load); - break; - } - - if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) && - (tbl->action < IWL_MIMO2_SWITCH_SISO_A || - tbl->action > IWL_MIMO2_SWITCH_SISO_C)) { - /* switch in SISO */ - tbl->action = IWL_MIMO2_SWITCH_SISO_A; - } - - /* configure as 1x1 if bt full concurrency */ - if (priv->bt_full_concurrent && - (tbl->action < IWL_MIMO2_SWITCH_SISO_A || - tbl->action > IWL_MIMO2_SWITCH_SISO_C)) - tbl->action = IWL_MIMO2_SWITCH_SISO_A; - - start_action = tbl->action; - for (;;) { - lq_sta->action_counter++; - switch (tbl->action) { - case IWL_MIMO2_SWITCH_ANTENNA1: - case IWL_MIMO2_SWITCH_ANTENNA2: - IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle Antennas\n"); - - if (tx_chains_num <= 2) - break; - - if (window->success_ratio >= IWL_RS_GOOD_RATIO) - break; - - memcpy(search_tbl, tbl, sz); - if (rs_toggle_antenna(valid_tx_ant, - &search_tbl->current_rate, search_tbl)) { - update_search_tbl_counter = 1; - goto out; - } - break; - case IWL_MIMO2_SWITCH_SISO_A: - case IWL_MIMO2_SWITCH_SISO_B: - case IWL_MIMO2_SWITCH_SISO_C: - IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to SISO\n"); - - /* Set up new search table for SISO */ - memcpy(search_tbl, tbl, sz); - - if (tbl->action == IWL_MIMO2_SWITCH_SISO_A) - search_tbl->ant_type = ANT_A; - else if (tbl->action == IWL_MIMO2_SWITCH_SISO_B) - search_tbl->ant_type = ANT_B; - else - search_tbl->ant_type = ANT_C; - - if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) - break; - - ret = rs_switch_to_siso(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) - goto out; - - break; - - case IWL_MIMO2_SWITCH_GI: - if (!tbl->is_ht40 && !(ht_cap->cap & - IEEE80211_HT_CAP_SGI_20)) - break; - if (tbl->is_ht40 && !(ht_cap->cap & - IEEE80211_HT_CAP_SGI_40)) - break; - - IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle SGI/NGI\n"); - - /* Set up new search table for MIMO2 */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = !tbl->is_SGI; - rs_set_expected_tpt_table(lq_sta, search_tbl); - /* - * If active table already uses the fastest possible - * modulation (dual stream with short guard interval), - * and it's working well, there's no need to look - * for a better type of modulation! - */ - if (tbl->is_SGI) { - s32 tpt = lq_sta->last_tpt / 100; - if (tpt >= search_tbl->expected_tpt[index]) - break; - } - search_tbl->current_rate = - rate_n_flags_from_tbl(priv, search_tbl, - index, is_green); - update_search_tbl_counter = 1; - goto out; - - case IWL_MIMO2_SWITCH_MIMO3_ABC: - IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to MIMO3\n"); - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - search_tbl->ant_type = ANT_ABC; - - if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) - break; - - ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) - goto out; - - break; - } - tbl->action++; - if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC) - tbl->action = IWL_MIMO2_SWITCH_ANTENNA1; - - if (tbl->action == start_action) - break; - } - search_tbl->lq_type = LQ_NONE; - return 0; - out: - lq_sta->search_better_tbl = 1; - tbl->action++; - if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC) - tbl->action = IWL_MIMO2_SWITCH_ANTENNA1; - if (update_search_tbl_counter) - search_tbl->action = tbl->action; - - return 0; - -} - -/* - * Try to switch to new modulation mode from MIMO3 - */ -static int rs_move_mimo3_to_other(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct ieee80211_sta *sta, int index) -{ - s8 is_green = lq_sta->is_green; - struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - struct iwl_rate_scale_data *window = &(tbl->win[index]); - struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; - u32 sz = (sizeof(struct iwl_scale_tbl_info) - - (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action; - u8 valid_tx_ant = priv->hw_params.valid_tx_ant; - u8 tx_chains_num = priv->hw_params.tx_chains_num; - int ret; - u8 update_search_tbl_counter = 0; - - switch (priv->bt_traffic_load) { - case IWL_BT_COEX_TRAFFIC_LOAD_NONE: - /* nothing */ - break; - case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: - case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: - /* avoid antenna B and MIMO */ - if (tbl->action != IWL_MIMO3_SWITCH_SISO_A) - tbl->action = IWL_MIMO3_SWITCH_SISO_A; - break; - case IWL_BT_COEX_TRAFFIC_LOAD_LOW: - /* avoid antenna B unless MIMO */ - if (tbl->action == IWL_MIMO3_SWITCH_SISO_B || - tbl->action == IWL_MIMO3_SWITCH_SISO_C) - tbl->action = IWL_MIMO3_SWITCH_SISO_A; - break; - default: - IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load); - break; - } - - if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) && - (tbl->action < IWL_MIMO3_SWITCH_SISO_A || - tbl->action > IWL_MIMO3_SWITCH_SISO_C)) { - /* switch in SISO */ - tbl->action = IWL_MIMO3_SWITCH_SISO_A; - } - - /* configure as 1x1 if bt full concurrency */ - if (priv->bt_full_concurrent && - (tbl->action < IWL_MIMO3_SWITCH_SISO_A || - tbl->action > IWL_MIMO3_SWITCH_SISO_C)) - tbl->action = IWL_MIMO3_SWITCH_SISO_A; - - start_action = tbl->action; - for (;;) { - lq_sta->action_counter++; - switch (tbl->action) { - case IWL_MIMO3_SWITCH_ANTENNA1: - case IWL_MIMO3_SWITCH_ANTENNA2: - IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle Antennas\n"); - - if (tx_chains_num <= 3) - break; - - if (window->success_ratio >= IWL_RS_GOOD_RATIO) - break; - - memcpy(search_tbl, tbl, sz); - if (rs_toggle_antenna(valid_tx_ant, - &search_tbl->current_rate, search_tbl)) - goto out; - break; - case IWL_MIMO3_SWITCH_SISO_A: - case IWL_MIMO3_SWITCH_SISO_B: - case IWL_MIMO3_SWITCH_SISO_C: - IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to SISO\n"); - - /* Set up new search table for SISO */ - memcpy(search_tbl, tbl, sz); - - if (tbl->action == IWL_MIMO3_SWITCH_SISO_A) - search_tbl->ant_type = ANT_A; - else if (tbl->action == IWL_MIMO3_SWITCH_SISO_B) - search_tbl->ant_type = ANT_B; - else - search_tbl->ant_type = ANT_C; - - if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) - break; - - ret = rs_switch_to_siso(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) - goto out; - - break; - - case IWL_MIMO3_SWITCH_MIMO2_AB: - case IWL_MIMO3_SWITCH_MIMO2_AC: - case IWL_MIMO3_SWITCH_MIMO2_BC: - IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to MIMO2\n"); - - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AB) - search_tbl->ant_type = ANT_AB; - else if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AC) - search_tbl->ant_type = ANT_AC; - else - search_tbl->ant_type = ANT_BC; - - if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) - break; - - ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) - goto out; - - break; - - case IWL_MIMO3_SWITCH_GI: - if (!tbl->is_ht40 && !(ht_cap->cap & - IEEE80211_HT_CAP_SGI_20)) - break; - if (tbl->is_ht40 && !(ht_cap->cap & - IEEE80211_HT_CAP_SGI_40)) - break; - - IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle SGI/NGI\n"); - - /* Set up new search table for MIMO */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = !tbl->is_SGI; - rs_set_expected_tpt_table(lq_sta, search_tbl); - /* - * If active table already uses the fastest possible - * modulation (dual stream with short guard interval), - * and it's working well, there's no need to look - * for a better type of modulation! - */ - if (tbl->is_SGI) { - s32 tpt = lq_sta->last_tpt / 100; - if (tpt >= search_tbl->expected_tpt[index]) - break; - } - search_tbl->current_rate = - rate_n_flags_from_tbl(priv, search_tbl, - index, is_green); - update_search_tbl_counter = 1; - goto out; - } - tbl->action++; - if (tbl->action > IWL_MIMO3_SWITCH_GI) - tbl->action = IWL_MIMO3_SWITCH_ANTENNA1; - - if (tbl->action == start_action) - break; - } - search_tbl->lq_type = LQ_NONE; - return 0; - out: - lq_sta->search_better_tbl = 1; - tbl->action++; - if (tbl->action > IWL_MIMO3_SWITCH_GI) - tbl->action = IWL_MIMO3_SWITCH_ANTENNA1; - if (update_search_tbl_counter) - search_tbl->action = tbl->action; - - return 0; - -} - -/* - * Check whether we should continue using same modulation mode, or - * begin search for a new mode, based on: - * 1) # tx successes or failures while using this mode - * 2) # times calling this function - * 3) elapsed time in this mode (not used, for now) - */ -static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search) -{ - struct iwl_scale_tbl_info *tbl; - int i; - int active_tbl; - int flush_interval_passed = 0; - struct iwl_priv *priv; - - priv = lq_sta->drv; - active_tbl = lq_sta->active_tbl; - - tbl = &(lq_sta->lq_info[active_tbl]); - - /* If we've been disallowing search, see if we should now allow it */ - if (lq_sta->stay_in_tbl) { - - /* Elapsed time using current modulation mode */ - if (lq_sta->flush_timer) - flush_interval_passed = - time_after(jiffies, - (unsigned long)(lq_sta->flush_timer + - IWL_RATE_SCALE_FLUSH_INTVL)); - - /* - * Check if we should allow search for new modulation mode. - * If many frames have failed or succeeded, or we've used - * this same modulation for a long time, allow search, and - * reset history stats that keep track of whether we should - * allow a new search. Also (below) reset all bitmaps and - * stats in active history. - */ - if (force_search || - (lq_sta->total_failed > lq_sta->max_failure_limit) || - (lq_sta->total_success > lq_sta->max_success_limit) || - ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer) - && (flush_interval_passed))) { - IWL_DEBUG_RATE(priv, "LQ: stay is expired %d %d %d\n:", - lq_sta->total_failed, - lq_sta->total_success, - flush_interval_passed); - - /* Allow search for new mode */ - lq_sta->stay_in_tbl = 0; /* only place reset */ - lq_sta->total_failed = 0; - lq_sta->total_success = 0; - lq_sta->flush_timer = 0; - - /* - * Else if we've used this modulation mode enough repetitions - * (regardless of elapsed time or success/failure), reset - * history bitmaps and rate-specific stats for all rates in - * active table. - */ - } else { - lq_sta->table_count++; - if (lq_sta->table_count >= - lq_sta->table_count_limit) { - lq_sta->table_count = 0; - - IWL_DEBUG_RATE(priv, "LQ: stay in table clear win\n"); - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window( - &(tbl->win[i])); - } - } - - /* If transitioning to allow "search", reset all history - * bitmaps and stats in active table (this will become the new - * "search" table). */ - if (!lq_sta->stay_in_tbl) { - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(tbl->win[i])); - } - } -} - -/* - * setup rate table in uCode - * return rate_n_flags as used in the table - */ -static u32 rs_update_rate_tbl(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - struct iwl_lq_sta *lq_sta, - struct iwl_scale_tbl_info *tbl, - int index, u8 is_green) -{ - u32 rate; - - /* Update uCode's rate table. */ - rate = rate_n_flags_from_tbl(priv, tbl, index, is_green); - rs_fill_link_cmd(priv, lq_sta, rate); - iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false); - - return rate; -} - -/* - * Do rate scaling and search for new modulation mode. - */ -static void rs_rate_scale_perform(struct iwl_priv *priv, - struct sk_buff *skb, - struct ieee80211_sta *sta, - struct iwl_lq_sta *lq_sta) -{ - struct ieee80211_hw *hw = priv->hw; - struct ieee80211_conf *conf = &hw->conf; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - int low = IWL_RATE_INVALID; - int high = IWL_RATE_INVALID; - int index; - int i; - struct iwl_rate_scale_data *window = NULL; - int current_tpt = IWL_INVALID_VALUE; - int low_tpt = IWL_INVALID_VALUE; - int high_tpt = IWL_INVALID_VALUE; - u32 fail_count; - s8 scale_action = 0; - u16 rate_mask; - u8 update_lq = 0; - struct iwl_scale_tbl_info *tbl, *tbl1; - u16 rate_scale_index_msk = 0; - u32 rate; - u8 is_green = 0; - u8 active_tbl = 0; - u8 done_search = 0; - u16 high_low; - s32 sr; - u8 tid = MAX_TID_COUNT; - struct iwl_tid_data *tid_data; - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - struct iwl_rxon_context *ctx = sta_priv->common.ctx; - - IWL_DEBUG_RATE(priv, "rate scale calculate new rate for skb\n"); - - /* Send management frames and NO_ACK data using lowest rate. */ - /* TODO: this could probably be improved.. */ - if (!ieee80211_is_data(hdr->frame_control) || - info->flags & IEEE80211_TX_CTL_NO_ACK) - return; - - if (!sta || !lq_sta) - return; - - lq_sta->supp_rates = sta->supp_rates[lq_sta->band]; - - tid = rs_tl_add_packet(lq_sta, hdr); - if ((tid != MAX_TID_COUNT) && (lq_sta->tx_agg_tid_en & (1 << tid))) { - tid_data = &priv->stations[lq_sta->lq.sta_id].tid[tid]; - if (tid_data->agg.state == IWL_AGG_OFF) - lq_sta->is_agg = 0; - else - lq_sta->is_agg = 1; - } else - lq_sta->is_agg = 0; - - /* - * Select rate-scale / modulation-mode table to work with in - * the rest of this function: "search" if searching for better - * modulation mode, or "active" if doing rate scaling within a mode. - */ - if (!lq_sta->search_better_tbl) - active_tbl = lq_sta->active_tbl; - else - active_tbl = 1 - lq_sta->active_tbl; - - tbl = &(lq_sta->lq_info[active_tbl]); - if (is_legacy(tbl->lq_type)) - lq_sta->is_green = 0; - else - lq_sta->is_green = rs_use_green(sta); - is_green = lq_sta->is_green; - - /* current tx rate */ - index = lq_sta->last_txrate_idx; - - IWL_DEBUG_RATE(priv, "Rate scale index %d for type %d\n", index, - tbl->lq_type); - - /* rates available for this association, and for modulation mode */ - rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type); - - IWL_DEBUG_RATE(priv, "mask 0x%04X\n", rate_mask); - - /* mask with station rate restriction */ - if (is_legacy(tbl->lq_type)) { - if (lq_sta->band == IEEE80211_BAND_5GHZ) - /* supp_rates has no CCK bits in A mode */ - rate_scale_index_msk = (u16) (rate_mask & - (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); - else - rate_scale_index_msk = (u16) (rate_mask & - lq_sta->supp_rates); - - } else - rate_scale_index_msk = rate_mask; - - if (!rate_scale_index_msk) - rate_scale_index_msk = rate_mask; - - if (!((1 << index) & rate_scale_index_msk)) { - IWL_ERR(priv, "Current Rate is not valid\n"); - if (lq_sta->search_better_tbl) { - /* revert to active table if search table is not valid*/ - tbl->lq_type = LQ_NONE; - lq_sta->search_better_tbl = 0; - tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - /* get "active" rate info */ - index = iwl_hwrate_to_plcp_idx(tbl->current_rate); - rate = rs_update_rate_tbl(priv, ctx, lq_sta, - tbl, index, is_green); - } - return; - } - - /* Get expected throughput table and history window for current rate */ - if (!tbl->expected_tpt) { - IWL_ERR(priv, "tbl->expected_tpt is NULL\n"); - return; - } - - /* force user max rate if set by user */ - if ((lq_sta->max_rate_idx != -1) && - (lq_sta->max_rate_idx < index)) { - index = lq_sta->max_rate_idx; - update_lq = 1; - window = &(tbl->win[index]); - goto lq_update; - } - - window = &(tbl->win[index]); - - /* - * If there is not enough history to calculate actual average - * throughput, keep analyzing results of more tx frames, without - * changing rate or mode (bypass most of the rest of this function). - * Set up new rate table in uCode only if old rate is not supported - * in current association (use new rate found above). - */ - fail_count = window->counter - window->success_counter; - if ((fail_count < IWL_RATE_MIN_FAILURE_TH) && - (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) { - IWL_DEBUG_RATE(priv, "LQ: still below TH. succ=%d total=%d " - "for index %d\n", - window->success_counter, window->counter, index); - - /* Can't calculate this yet; not enough history */ - window->average_tpt = IWL_INVALID_VALUE; - - /* Should we stay with this modulation mode, - * or search for a new one? */ - rs_stay_in_table(lq_sta, false); - - goto out; - } - /* Else we have enough samples; calculate estimate of - * actual average throughput */ - if (window->average_tpt != ((window->success_ratio * - tbl->expected_tpt[index] + 64) / 128)) { - IWL_ERR(priv, "expected_tpt should have been calculated by now\n"); - window->average_tpt = ((window->success_ratio * - tbl->expected_tpt[index] + 64) / 128); - } - - /* If we are searching for better modulation mode, check success. */ - if (lq_sta->search_better_tbl && - (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI)) { - /* If good success, continue using the "search" mode; - * no need to send new link quality command, since we're - * continuing to use the setup that we've been trying. */ - if (window->average_tpt > lq_sta->last_tpt) { - - IWL_DEBUG_RATE(priv, "LQ: SWITCHING TO NEW TABLE " - "suc=%d cur-tpt=%d old-tpt=%d\n", - window->success_ratio, - window->average_tpt, - lq_sta->last_tpt); - - if (!is_legacy(tbl->lq_type)) - lq_sta->enable_counter = 1; - - /* Swap tables; "search" becomes "active" */ - lq_sta->active_tbl = active_tbl; - current_tpt = window->average_tpt; - - /* Else poor success; go back to mode in "active" table */ - } else { - - IWL_DEBUG_RATE(priv, "LQ: GOING BACK TO THE OLD TABLE " - "suc=%d cur-tpt=%d old-tpt=%d\n", - window->success_ratio, - window->average_tpt, - lq_sta->last_tpt); - - /* Nullify "search" table */ - tbl->lq_type = LQ_NONE; - - /* Revert to "active" table */ - active_tbl = lq_sta->active_tbl; - tbl = &(lq_sta->lq_info[active_tbl]); - - /* Revert to "active" rate and throughput info */ - index = iwl_hwrate_to_plcp_idx(tbl->current_rate); - current_tpt = lq_sta->last_tpt; - - /* Need to set up a new rate table in uCode */ - update_lq = 1; - } - - /* Either way, we've made a decision; modulation mode - * search is done, allow rate adjustment next time. */ - lq_sta->search_better_tbl = 0; - done_search = 1; /* Don't switch modes below! */ - goto lq_update; - } - - /* (Else) not in search of better modulation mode, try for better - * starting rate, while staying in this mode. */ - high_low = rs_get_adjacent_rate(priv, index, rate_scale_index_msk, - tbl->lq_type); - low = high_low & 0xff; - high = (high_low >> 8) & 0xff; - - /* If user set max rate, dont allow higher than user constrain */ - if ((lq_sta->max_rate_idx != -1) && - (lq_sta->max_rate_idx < high)) - high = IWL_RATE_INVALID; - - sr = window->success_ratio; - - /* Collect measured throughputs for current and adjacent rates */ - current_tpt = window->average_tpt; - if (low != IWL_RATE_INVALID) - low_tpt = tbl->win[low].average_tpt; - if (high != IWL_RATE_INVALID) - high_tpt = tbl->win[high].average_tpt; - - scale_action = 0; - - /* Too many failures, decrease rate */ - if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) { - IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n"); - scale_action = -1; - - /* No throughput measured yet for adjacent rates; try increase. */ - } else if ((low_tpt == IWL_INVALID_VALUE) && - (high_tpt == IWL_INVALID_VALUE)) { - - if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH) - scale_action = 1; - else if (low != IWL_RATE_INVALID) - scale_action = 0; - } - - /* Both adjacent throughputs are measured, but neither one has better - * throughput; we're using the best rate, don't change it! */ - else if ((low_tpt != IWL_INVALID_VALUE) && - (high_tpt != IWL_INVALID_VALUE) && - (low_tpt < current_tpt) && - (high_tpt < current_tpt)) - scale_action = 0; - - /* At least one adjacent rate's throughput is measured, - * and may have better performance. */ - else { - /* Higher adjacent rate's throughput is measured */ - if (high_tpt != IWL_INVALID_VALUE) { - /* Higher rate has better throughput */ - if (high_tpt > current_tpt && - sr >= IWL_RATE_INCREASE_TH) { - scale_action = 1; - } else { - scale_action = 0; - } - - /* Lower adjacent rate's throughput is measured */ - } else if (low_tpt != IWL_INVALID_VALUE) { - /* Lower rate has better throughput */ - if (low_tpt > current_tpt) { - IWL_DEBUG_RATE(priv, - "decrease rate because of low tpt\n"); - scale_action = -1; - } else if (sr >= IWL_RATE_INCREASE_TH) { - scale_action = 1; - } - } - } - - /* Sanity check; asked for decrease, but success rate or throughput - * has been good at old rate. Don't change it. */ - if ((scale_action == -1) && (low != IWL_RATE_INVALID) && - ((sr > IWL_RATE_HIGH_TH) || - (current_tpt > (100 * tbl->expected_tpt[low])))) - scale_action = 0; - if (!iwl_ht_enabled(priv) && !is_legacy(tbl->lq_type)) - scale_action = -1; - if (iwl_tx_ant_restriction(priv) != IWL_ANT_OK_MULTI && - (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) - scale_action = -1; - - if ((priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) && - (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) { - if (lq_sta->last_bt_traffic > priv->bt_traffic_load) { - /* - * don't set scale_action, don't want to scale up if - * the rate scale doesn't otherwise think that is a - * good idea. - */ - } else if (lq_sta->last_bt_traffic <= priv->bt_traffic_load) { - scale_action = -1; - } - } - lq_sta->last_bt_traffic = priv->bt_traffic_load; - - if ((priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) && - (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) { - /* search for a new modulation */ - rs_stay_in_table(lq_sta, true); - goto lq_update; - } - - switch (scale_action) { - case -1: - /* Decrease starting rate, update uCode's rate table */ - if (low != IWL_RATE_INVALID) { - update_lq = 1; - index = low; - } - - break; - case 1: - /* Increase starting rate, update uCode's rate table */ - if (high != IWL_RATE_INVALID) { - update_lq = 1; - index = high; - } - - break; - case 0: - /* No change */ - default: - break; - } - - IWL_DEBUG_RATE(priv, "choose rate scale index %d action %d low %d " - "high %d type %d\n", - index, scale_action, low, high, tbl->lq_type); - -lq_update: - /* Replace uCode's rate table for the destination station. */ - if (update_lq) - rate = rs_update_rate_tbl(priv, ctx, lq_sta, - tbl, index, is_green); - - if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI) { - /* Should we stay with this modulation mode, - * or search for a new one? */ - rs_stay_in_table(lq_sta, false); - } - /* - * Search for new modulation mode if we're: - * 1) Not changing rates right now - * 2) Not just finishing up a search - * 3) Allowing a new search - */ - if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) { - /* Save current throughput to compare with "search" throughput*/ - lq_sta->last_tpt = current_tpt; - - /* Select a new "search" modulation mode to try. - * If one is found, set up the new "search" table. */ - if (is_legacy(tbl->lq_type)) - rs_move_legacy_other(priv, lq_sta, conf, sta, index); - else if (is_siso(tbl->lq_type)) - rs_move_siso_to_other(priv, lq_sta, conf, sta, index); - else if (is_mimo2(tbl->lq_type)) - rs_move_mimo2_to_other(priv, lq_sta, conf, sta, index); - else - rs_move_mimo3_to_other(priv, lq_sta, conf, sta, index); - - /* If new "search" mode was selected, set up in uCode table */ - if (lq_sta->search_better_tbl) { - /* Access the "search" table, clear its history. */ - tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(tbl->win[i])); - - /* Use new "search" start rate */ - index = iwl_hwrate_to_plcp_idx(tbl->current_rate); - - IWL_DEBUG_RATE(priv, "Switch current mcs: %X index: %d\n", - tbl->current_rate, index); - rs_fill_link_cmd(priv, lq_sta, tbl->current_rate); - iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false); - } else - done_search = 1; - } - - if (done_search && !lq_sta->stay_in_tbl) { - /* If the "active" (non-search) mode was legacy, - * and we've tried switching antennas, - * but we haven't been able to try HT modes (not available), - * stay with best antenna legacy modulation for a while - * before next round of mode comparisons. */ - tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]); - if (is_legacy(tbl1->lq_type) && !conf_is_ht(conf) && - lq_sta->action_counter > tbl1->max_search) { - IWL_DEBUG_RATE(priv, "LQ: STAY in legacy table\n"); - rs_set_stay_in_table(priv, 1, lq_sta); - } - - /* If we're in an HT mode, and all 3 mode switch actions - * have been tried and compared, stay in this best modulation - * mode for a while before next round of mode comparisons. */ - if (lq_sta->enable_counter && - (lq_sta->action_counter >= tbl1->max_search) && - iwl_ht_enabled(priv)) { - if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) && - (lq_sta->tx_agg_tid_en & (1 << tid)) && - (tid != MAX_TID_COUNT)) { - tid_data = - &priv->stations[lq_sta->lq.sta_id].tid[tid]; - if (tid_data->agg.state == IWL_AGG_OFF) { - IWL_DEBUG_RATE(priv, - "try to aggregate tid %d\n", - tid); - rs_tl_turn_on_agg(priv, tid, - lq_sta, sta); - } - } - rs_set_stay_in_table(priv, 0, lq_sta); - } - } - -out: - tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, index, is_green); - i = index; - lq_sta->last_txrate_idx = i; -} - -/** - * rs_initialize_lq - Initialize a station's hardware rate table - * - * The uCode's station table contains a table of fallback rates - * for automatic fallback during transmission. - * - * NOTE: This sets up a default set of values. These will be replaced later - * if the driver's iwl-agn-rs rate scaling algorithm is used, instead of - * rc80211_simple. - * - * NOTE: Run REPLY_ADD_STA command to set up station table entry, before - * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD, - * which requires station table entry to exist). - */ -static void rs_initialize_lq(struct iwl_priv *priv, - struct ieee80211_conf *conf, - struct ieee80211_sta *sta, - struct iwl_lq_sta *lq_sta) -{ - struct iwl_scale_tbl_info *tbl; - int rate_idx; - int i; - u32 rate; - u8 use_green = rs_use_green(sta); - u8 active_tbl = 0; - u8 valid_tx_ant; - struct iwl_station_priv *sta_priv; - struct iwl_rxon_context *ctx; - - if (!sta || !lq_sta) - return; - - sta_priv = (void *)sta->drv_priv; - ctx = sta_priv->common.ctx; - - i = lq_sta->last_txrate_idx; - - valid_tx_ant = priv->hw_params.valid_tx_ant; - - if (!lq_sta->search_better_tbl) - active_tbl = lq_sta->active_tbl; - else - active_tbl = 1 - lq_sta->active_tbl; - - tbl = &(lq_sta->lq_info[active_tbl]); - - if ((i < 0) || (i >= IWL_RATE_COUNT)) - i = 0; - - rate = iwl_rates[i].plcp; - tbl->ant_type = first_antenna(valid_tx_ant); - rate |= tbl->ant_type << RATE_MCS_ANT_POS; - - if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE) - rate |= RATE_MCS_CCK_MSK; - - rs_get_tbl_info_from_mcs(rate, priv->band, tbl, &rate_idx); - if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type)) - rs_toggle_antenna(valid_tx_ant, &rate, tbl); - - rate = rate_n_flags_from_tbl(priv, tbl, rate_idx, use_green); - tbl->current_rate = rate; - rs_set_expected_tpt_table(lq_sta, tbl); - rs_fill_link_cmd(NULL, lq_sta, rate); - priv->stations[lq_sta->lq.sta_id].lq = &lq_sta->lq; - iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_SYNC, true); -} - -static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta, - struct ieee80211_tx_rate_control *txrc) -{ - - struct sk_buff *skb = txrc->skb; - struct ieee80211_supported_band *sband = txrc->sband; - struct iwl_priv *priv __maybe_unused = (struct iwl_priv *)priv_r; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct iwl_lq_sta *lq_sta = priv_sta; - int rate_idx; - - IWL_DEBUG_RATE_LIMIT(priv, "rate scale calculate new rate for skb\n"); - - /* Get max rate if user set max rate */ - if (lq_sta) { - lq_sta->max_rate_idx = txrc->max_rate_idx; - if ((sband->band == IEEE80211_BAND_5GHZ) && - (lq_sta->max_rate_idx != -1)) - lq_sta->max_rate_idx += IWL_FIRST_OFDM_RATE; - if ((lq_sta->max_rate_idx < 0) || - (lq_sta->max_rate_idx >= IWL_RATE_COUNT)) - lq_sta->max_rate_idx = -1; - } - - /* Treat uninitialized rate scaling data same as non-existing. */ - if (lq_sta && !lq_sta->drv) { - IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n"); - priv_sta = NULL; - } - - /* Send management frames and NO_ACK data using lowest rate. */ - if (rate_control_send_low(sta, priv_sta, txrc)) - return; - - rate_idx = lq_sta->last_txrate_idx; - - if (lq_sta->last_rate_n_flags & RATE_MCS_HT_MSK) { - rate_idx -= IWL_FIRST_OFDM_RATE; - /* 6M and 9M shared same MCS index */ - rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0; - if (rs_extract_rate(lq_sta->last_rate_n_flags) >= - IWL_RATE_MIMO3_6M_PLCP) - rate_idx = rate_idx + (2 * MCS_INDEX_PER_STREAM); - else if (rs_extract_rate(lq_sta->last_rate_n_flags) >= - IWL_RATE_MIMO2_6M_PLCP) - rate_idx = rate_idx + MCS_INDEX_PER_STREAM; - info->control.rates[0].flags = IEEE80211_TX_RC_MCS; - if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK) - info->control.rates[0].flags |= IEEE80211_TX_RC_SHORT_GI; - if (lq_sta->last_rate_n_flags & RATE_MCS_DUP_MSK) - info->control.rates[0].flags |= IEEE80211_TX_RC_DUP_DATA; - if (lq_sta->last_rate_n_flags & RATE_MCS_HT40_MSK) - info->control.rates[0].flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; - if (lq_sta->last_rate_n_flags & RATE_MCS_GF_MSK) - info->control.rates[0].flags |= IEEE80211_TX_RC_GREEN_FIELD; - } else { - /* Check for invalid rates */ - if ((rate_idx < 0) || (rate_idx >= IWL_RATE_COUNT_LEGACY) || - ((sband->band == IEEE80211_BAND_5GHZ) && - (rate_idx < IWL_FIRST_OFDM_RATE))) - rate_idx = rate_lowest_index(sband, sta); - /* On valid 5 GHz rate, adjust index */ - else if (sband->band == IEEE80211_BAND_5GHZ) - rate_idx -= IWL_FIRST_OFDM_RATE; - info->control.rates[0].flags = 0; - } - info->control.rates[0].idx = rate_idx; - -} - -static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta, - gfp_t gfp) -{ - struct iwl_lq_sta *lq_sta; - struct iwl_station_priv *sta_priv = (struct iwl_station_priv *) sta->drv_priv; - struct iwl_priv *priv; - - priv = (struct iwl_priv *)priv_rate; - IWL_DEBUG_RATE(priv, "create station rate scale window\n"); - - lq_sta = &sta_priv->lq_sta; - - return lq_sta; -} - -/* - * Called after adding a new station to initialize rate scaling - */ -void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_id) -{ - int i, j; - struct ieee80211_hw *hw = priv->hw; - struct ieee80211_conf *conf = &priv->hw->conf; - struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; - struct iwl_station_priv *sta_priv; - struct iwl_lq_sta *lq_sta; - struct ieee80211_supported_band *sband; - - sta_priv = (struct iwl_station_priv *) sta->drv_priv; - lq_sta = &sta_priv->lq_sta; - sband = hw->wiphy->bands[conf->channel->band]; - - - lq_sta->lq.sta_id = sta_id; - - for (j = 0; j < LQ_SIZE; j++) - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); - - lq_sta->flush_timer = 0; - lq_sta->supp_rates = sta->supp_rates[sband->band]; - for (j = 0; j < LQ_SIZE; j++) - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); - - IWL_DEBUG_RATE(priv, "LQ: *** rate scale station global init for station %d ***\n", - sta_id); - /* TODO: what is a good starting rate for STA? About middle? Maybe not - * the lowest or the highest rate.. Could consider using RSSI from - * previous packets? Need to have IEEE 802.1X auth succeed immediately - * after assoc.. */ - - lq_sta->is_dup = 0; - lq_sta->max_rate_idx = -1; - lq_sta->missed_rate_counter = IWL_MISSED_RATE_MAX; - lq_sta->is_green = rs_use_green(sta); - lq_sta->active_legacy_rate = priv->active_rate & ~(0x1000); - lq_sta->band = priv->band; - /* - * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3), - * supp_rates[] does not; shift to convert format, force 9 MBits off. - */ - lq_sta->active_siso_rate = ht_cap->mcs.rx_mask[0] << 1; - lq_sta->active_siso_rate |= ht_cap->mcs.rx_mask[0] & 0x1; - lq_sta->active_siso_rate &= ~((u16)0x2); - lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE; - - /* Same here */ - lq_sta->active_mimo2_rate = ht_cap->mcs.rx_mask[1] << 1; - lq_sta->active_mimo2_rate |= ht_cap->mcs.rx_mask[1] & 0x1; - lq_sta->active_mimo2_rate &= ~((u16)0x2); - lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE; - - lq_sta->active_mimo3_rate = ht_cap->mcs.rx_mask[2] << 1; - lq_sta->active_mimo3_rate |= ht_cap->mcs.rx_mask[2] & 0x1; - lq_sta->active_mimo3_rate &= ~((u16)0x2); - lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE; - - IWL_DEBUG_RATE(priv, "SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n", - lq_sta->active_siso_rate, - lq_sta->active_mimo2_rate, - lq_sta->active_mimo3_rate); - - /* These values will be overridden later */ - lq_sta->lq.general_params.single_stream_ant_msk = - first_antenna(priv->hw_params.valid_tx_ant); - lq_sta->lq.general_params.dual_stream_ant_msk = - priv->hw_params.valid_tx_ant & - ~first_antenna(priv->hw_params.valid_tx_ant); - if (!lq_sta->lq.general_params.dual_stream_ant_msk) { - lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB; - } else if (num_of_ant(priv->hw_params.valid_tx_ant) == 2) { - lq_sta->lq.general_params.dual_stream_ant_msk = - priv->hw_params.valid_tx_ant; - } - - /* as default allow aggregation for all tids */ - lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID; - lq_sta->drv = priv; - - /* Set last_txrate_idx to lowest rate */ - lq_sta->last_txrate_idx = rate_lowest_index(sband, sta); - if (sband->band == IEEE80211_BAND_5GHZ) - lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; - lq_sta->is_agg = 0; - - rs_initialize_lq(priv, conf, sta, lq_sta); -} - -static void rs_fill_link_cmd(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, u32 new_rate) -{ - struct iwl_scale_tbl_info tbl_type; - int index = 0; - int rate_idx; - int repeat_rate = 0; - u8 ant_toggle_cnt = 0; - u8 use_ht_possible = 1; - u8 valid_tx_ant = 0; - struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq; - - /* Override starting rate (index 0) if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, &new_rate, index); - - /* Interpret new_rate (rate_n_flags) */ - rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, - &tbl_type, &rate_idx); - - if (priv && priv->bt_full_concurrent) { - /* 1x1 only */ - tbl_type.ant_type = - first_antenna(priv->hw_params.valid_tx_ant); - } - - /* How many times should we repeat the initial rate? */ - if (is_legacy(tbl_type.lq_type)) { - ant_toggle_cnt = 1; - repeat_rate = IWL_NUMBER_TRY; - } else { - repeat_rate = IWL_HT_NUMBER_TRY; - } - - lq_cmd->general_params.mimo_delimiter = - is_mimo(tbl_type.lq_type) ? 1 : 0; - - /* Fill 1st table entry (index 0) */ - lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); - - if (num_of_ant(tbl_type.ant_type) == 1) { - lq_cmd->general_params.single_stream_ant_msk = - tbl_type.ant_type; - } else if (num_of_ant(tbl_type.ant_type) == 2) { - lq_cmd->general_params.dual_stream_ant_msk = - tbl_type.ant_type; - } /* otherwise we don't modify the existing value */ - - index++; - repeat_rate--; - if (priv) { - if (priv->bt_full_concurrent) - valid_tx_ant = ANT_A; - else - valid_tx_ant = priv->hw_params.valid_tx_ant; - } - - /* Fill rest of rate table */ - while (index < LINK_QUAL_MAX_RETRY_NUM) { - /* Repeat initial/next rate. - * For legacy IWL_NUMBER_TRY == 1, this loop will not execute. - * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */ - while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) { - if (is_legacy(tbl_type.lq_type)) { - if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) - ant_toggle_cnt++; - else if (priv && - rs_toggle_antenna(valid_tx_ant, - &new_rate, &tbl_type)) - ant_toggle_cnt = 1; - } - - /* Override next rate if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, &new_rate, index); - - /* Fill next table entry */ - lq_cmd->rs_table[index].rate_n_flags = - cpu_to_le32(new_rate); - repeat_rate--; - index++; - } - - rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type, - &rate_idx); - - if (priv && priv->bt_full_concurrent) { - /* 1x1 only */ - tbl_type.ant_type = - first_antenna(priv->hw_params.valid_tx_ant); - } - - /* Indicate to uCode which entries might be MIMO. - * If initial rate was MIMO, this will finally end up - * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */ - if (is_mimo(tbl_type.lq_type)) - lq_cmd->general_params.mimo_delimiter = index; - - /* Get next rate */ - new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx, - use_ht_possible); - - /* How many times should we repeat the next rate? */ - if (is_legacy(tbl_type.lq_type)) { - if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) - ant_toggle_cnt++; - else if (priv && - rs_toggle_antenna(valid_tx_ant, - &new_rate, &tbl_type)) - ant_toggle_cnt = 1; - - repeat_rate = IWL_NUMBER_TRY; - } else { - repeat_rate = IWL_HT_NUMBER_TRY; - } - - /* Don't allow HT rates after next pass. - * rs_get_lower_rate() will change type to LQ_A or LQ_G. */ - use_ht_possible = 0; - - /* Override next rate if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, &new_rate, index); - - /* Fill next table entry */ - lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); - - index++; - repeat_rate--; - } - - lq_cmd->agg_params.agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_DEF; - lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF; - - lq_cmd->agg_params.agg_time_limit = - cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF); - /* - * overwrite if needed, pass aggregation time limit - * to uCode in uSec - */ - if (priv && priv->cfg->bt_params && - priv->cfg->bt_params->agg_time_limit && - priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) - lq_cmd->agg_params.agg_time_limit = - cpu_to_le16(priv->cfg->bt_params->agg_time_limit); -} - -static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) -{ - return hw->priv; -} -/* rate scale requires free function to be implemented */ -static void rs_free(void *priv_rate) -{ - return; -} - -static void rs_free_sta(void *priv_r, struct ieee80211_sta *sta, - void *priv_sta) -{ - struct iwl_priv *priv __maybe_unused = priv_r; - - IWL_DEBUG_RATE(priv, "enter\n"); - IWL_DEBUG_RATE(priv, "leave\n"); -} - - -#ifdef CONFIG_MAC80211_DEBUGFS -static int open_file_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} -static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, - u32 *rate_n_flags, int index) -{ - struct iwl_priv *priv; - u8 valid_tx_ant; - u8 ant_sel_tx; - - priv = lq_sta->drv; - valid_tx_ant = priv->hw_params.valid_tx_ant; - if (lq_sta->dbg_fixed_rate) { - ant_sel_tx = - ((lq_sta->dbg_fixed_rate & RATE_MCS_ANT_ABC_MSK) - >> RATE_MCS_ANT_POS); - if ((valid_tx_ant & ant_sel_tx) == ant_sel_tx) { - *rate_n_flags = lq_sta->dbg_fixed_rate; - IWL_DEBUG_RATE(priv, "Fixed rate ON\n"); - } else { - lq_sta->dbg_fixed_rate = 0; - IWL_ERR(priv, - "Invalid antenna selection 0x%X, Valid is 0x%X\n", - ant_sel_tx, valid_tx_ant); - IWL_DEBUG_RATE(priv, "Fixed rate OFF\n"); - } - } else { - IWL_DEBUG_RATE(priv, "Fixed rate OFF\n"); - } -} - -static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file, - const char __user *user_buf, size_t count, loff_t *ppos) -{ - struct iwl_lq_sta *lq_sta = file->private_data; - struct iwl_priv *priv; - char buf[64]; - int buf_size; - u32 parsed_rate; - struct iwl_station_priv *sta_priv = - container_of(lq_sta, struct iwl_station_priv, lq_sta); - struct iwl_rxon_context *ctx = sta_priv->common.ctx; - - priv = lq_sta->drv; - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - - if (sscanf(buf, "%x", &parsed_rate) == 1) - lq_sta->dbg_fixed_rate = parsed_rate; - else - lq_sta->dbg_fixed_rate = 0; - - lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */ - lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ - lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ - lq_sta->active_mimo3_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ - - IWL_DEBUG_RATE(priv, "sta_id %d rate 0x%X\n", - lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate); - - if (lq_sta->dbg_fixed_rate) { - rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate); - iwl_send_lq_cmd(lq_sta->drv, ctx, &lq_sta->lq, CMD_ASYNC, - false); - } - - return count; -} - -static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file, - char __user *user_buf, size_t count, loff_t *ppos) -{ - char *buff; - int desc = 0; - int i = 0; - int index = 0; - ssize_t ret; - - struct iwl_lq_sta *lq_sta = file->private_data; - struct iwl_priv *priv; - struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - - priv = lq_sta->drv; - buff = kmalloc(1024, GFP_KERNEL); - if (!buff) - return -ENOMEM; - - desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id); - desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n", - lq_sta->total_failed, lq_sta->total_success, - lq_sta->active_legacy_rate); - desc += sprintf(buff+desc, "fixed rate 0x%X\n", - lq_sta->dbg_fixed_rate); - desc += sprintf(buff+desc, "valid_tx_ant %s%s%s\n", - (priv->hw_params.valid_tx_ant & ANT_A) ? "ANT_A," : "", - (priv->hw_params.valid_tx_ant & ANT_B) ? "ANT_B," : "", - (priv->hw_params.valid_tx_ant & ANT_C) ? "ANT_C" : ""); - desc += sprintf(buff+desc, "lq type %s\n", - (is_legacy(tbl->lq_type)) ? "legacy" : "HT"); - if (is_Ht(tbl->lq_type)) { - desc += sprintf(buff+desc, " %s", - (is_siso(tbl->lq_type)) ? "SISO" : - ((is_mimo2(tbl->lq_type)) ? "MIMO2" : "MIMO3")); - desc += sprintf(buff+desc, " %s", - (tbl->is_ht40) ? "40MHz" : "20MHz"); - desc += sprintf(buff+desc, " %s %s %s\n", (tbl->is_SGI) ? "SGI" : "", - (lq_sta->is_green) ? "GF enabled" : "", - (lq_sta->is_agg) ? "AGG on" : ""); - } - desc += sprintf(buff+desc, "last tx rate=0x%X\n", - lq_sta->last_rate_n_flags); - desc += sprintf(buff+desc, "general:" - "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n", - lq_sta->lq.general_params.flags, - lq_sta->lq.general_params.mimo_delimiter, - lq_sta->lq.general_params.single_stream_ant_msk, - lq_sta->lq.general_params.dual_stream_ant_msk); - - desc += sprintf(buff+desc, "agg:" - "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n", - le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit), - lq_sta->lq.agg_params.agg_dis_start_th, - lq_sta->lq.agg_params.agg_frame_cnt_limit); - - desc += sprintf(buff+desc, - "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n", - lq_sta->lq.general_params.start_rate_index[0], - lq_sta->lq.general_params.start_rate_index[1], - lq_sta->lq.general_params.start_rate_index[2], - lq_sta->lq.general_params.start_rate_index[3]); - - for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) { - index = iwl_hwrate_to_plcp_idx( - le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags)); - if (is_legacy(tbl->lq_type)) { - desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps\n", - i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags), - iwl_rate_mcs[index].mbps); - } else { - desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps (%s)\n", - i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags), - iwl_rate_mcs[index].mbps, iwl_rate_mcs[index].mcs); - } - } - - ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); - kfree(buff); - return ret; -} - -static const struct file_operations rs_sta_dbgfs_scale_table_ops = { - .write = rs_sta_dbgfs_scale_table_write, - .read = rs_sta_dbgfs_scale_table_read, - .open = open_file_generic, - .llseek = default_llseek, -}; -static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, - char __user *user_buf, size_t count, loff_t *ppos) -{ - char *buff; - int desc = 0; - int i, j; - ssize_t ret; - - struct iwl_lq_sta *lq_sta = file->private_data; - - buff = kmalloc(1024, GFP_KERNEL); - if (!buff) - return -ENOMEM; - - for (i = 0; i < LQ_SIZE; i++) { - desc += sprintf(buff+desc, - "%s type=%d SGI=%d HT40=%d DUP=%d GF=%d\n" - "rate=0x%X\n", - lq_sta->active_tbl == i ? "*" : "x", - lq_sta->lq_info[i].lq_type, - lq_sta->lq_info[i].is_SGI, - lq_sta->lq_info[i].is_ht40, - lq_sta->lq_info[i].is_dup, - lq_sta->is_green, - lq_sta->lq_info[i].current_rate); - for (j = 0; j < IWL_RATE_COUNT; j++) { - desc += sprintf(buff+desc, - "counter=%d success=%d %%=%d\n", - lq_sta->lq_info[i].win[j].counter, - lq_sta->lq_info[i].win[j].success_counter, - lq_sta->lq_info[i].win[j].success_ratio); - } - } - ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); - kfree(buff); - return ret; -} - -static const struct file_operations rs_sta_dbgfs_stats_table_ops = { - .read = rs_sta_dbgfs_stats_table_read, - .open = open_file_generic, - .llseek = default_llseek, -}; - -static ssize_t rs_sta_dbgfs_rate_scale_data_read(struct file *file, - char __user *user_buf, size_t count, loff_t *ppos) -{ - char buff[120]; - int desc = 0; - ssize_t ret; - - struct iwl_lq_sta *lq_sta = file->private_data; - struct iwl_priv *priv; - struct iwl_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl]; - - priv = lq_sta->drv; - - if (is_Ht(tbl->lq_type)) - desc += sprintf(buff+desc, - "Bit Rate= %d Mb/s\n", - tbl->expected_tpt[lq_sta->last_txrate_idx]); - else - desc += sprintf(buff+desc, - "Bit Rate= %d Mb/s\n", - iwl_rates[lq_sta->last_txrate_idx].ieee >> 1); - - ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); - return ret; -} - -static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = { - .read = rs_sta_dbgfs_rate_scale_data_read, - .open = open_file_generic, - .llseek = default_llseek, -}; - -static void rs_add_debugfs(void *priv, void *priv_sta, - struct dentry *dir) -{ - struct iwl_lq_sta *lq_sta = priv_sta; - lq_sta->rs_sta_dbgfs_scale_table_file = - debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir, - lq_sta, &rs_sta_dbgfs_scale_table_ops); - lq_sta->rs_sta_dbgfs_stats_table_file = - debugfs_create_file("rate_stats_table", S_IRUSR, dir, - lq_sta, &rs_sta_dbgfs_stats_table_ops); - lq_sta->rs_sta_dbgfs_rate_scale_data_file = - debugfs_create_file("rate_scale_data", S_IRUSR, dir, - lq_sta, &rs_sta_dbgfs_rate_scale_data_ops); - lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file = - debugfs_create_u8("tx_agg_tid_enable", S_IRUSR | S_IWUSR, dir, - &lq_sta->tx_agg_tid_en); - -} - -static void rs_remove_debugfs(void *priv, void *priv_sta) -{ - struct iwl_lq_sta *lq_sta = priv_sta; - debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file); - debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file); - debugfs_remove(lq_sta->rs_sta_dbgfs_rate_scale_data_file); - debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file); -} -#endif - -/* - * Initialization of rate scaling information is done by driver after - * the station is added. Since mac80211 calls this function before a - * station is added we ignore it. - */ -static void rs_rate_init_stub(void *priv_r, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta) -{ -} -static struct rate_control_ops rs_ops = { - .module = NULL, - .name = RS_NAME, - .tx_status = rs_tx_status, - .get_rate = rs_get_rate, - .rate_init = rs_rate_init_stub, - .alloc = rs_alloc, - .free = rs_free, - .alloc_sta = rs_alloc_sta, - .free_sta = rs_free_sta, -#ifdef CONFIG_MAC80211_DEBUGFS - .add_sta_debugfs = rs_add_debugfs, - .remove_sta_debugfs = rs_remove_debugfs, -#endif -}; - -int iwlagn_rate_control_register(void) -{ - return ieee80211_rate_control_register(&rs_ops); -} - -void iwlagn_rate_control_unregister(void) -{ - ieee80211_rate_control_unregister(&rs_ops); -} - |