diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-agn-lib.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-agn-lib.c | 2381 |
1 files changed, 0 insertions, 2381 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c deleted file mode 100644 index f8fe5f44e19..00000000000 --- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c +++ /dev/null @@ -1,2381 +0,0 @@ -/****************************************************************************** - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#include <linux/etherdevice.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/sched.h> - -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-helpers.h" -#include "iwl-agn-hw.h" -#include "iwl-agn.h" -#include "iwl-sta.h" - -static inline u32 iwlagn_get_scd_ssn(struct iwlagn_tx_resp *tx_resp) -{ - return le32_to_cpup((__le32 *)&tx_resp->status + - tx_resp->frame_count) & MAX_SN; -} - -static void iwlagn_count_tx_err_status(struct iwl_priv *priv, u16 status) -{ - status &= TX_STATUS_MSK; - - switch (status) { - case TX_STATUS_POSTPONE_DELAY: - priv->_agn.reply_tx_stats.pp_delay++; - break; - case TX_STATUS_POSTPONE_FEW_BYTES: - priv->_agn.reply_tx_stats.pp_few_bytes++; - break; - case TX_STATUS_POSTPONE_BT_PRIO: - priv->_agn.reply_tx_stats.pp_bt_prio++; - break; - case TX_STATUS_POSTPONE_QUIET_PERIOD: - priv->_agn.reply_tx_stats.pp_quiet_period++; - break; - case TX_STATUS_POSTPONE_CALC_TTAK: - priv->_agn.reply_tx_stats.pp_calc_ttak++; - break; - case TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY: - priv->_agn.reply_tx_stats.int_crossed_retry++; - break; - case TX_STATUS_FAIL_SHORT_LIMIT: - priv->_agn.reply_tx_stats.short_limit++; - break; - case TX_STATUS_FAIL_LONG_LIMIT: - priv->_agn.reply_tx_stats.long_limit++; - break; - case TX_STATUS_FAIL_FIFO_UNDERRUN: - priv->_agn.reply_tx_stats.fifo_underrun++; - break; - case TX_STATUS_FAIL_DRAIN_FLOW: - priv->_agn.reply_tx_stats.drain_flow++; - break; - case TX_STATUS_FAIL_RFKILL_FLUSH: - priv->_agn.reply_tx_stats.rfkill_flush++; - break; - case TX_STATUS_FAIL_LIFE_EXPIRE: - priv->_agn.reply_tx_stats.life_expire++; - break; - case TX_STATUS_FAIL_DEST_PS: - priv->_agn.reply_tx_stats.dest_ps++; - break; - case TX_STATUS_FAIL_HOST_ABORTED: - priv->_agn.reply_tx_stats.host_abort++; - break; - case TX_STATUS_FAIL_BT_RETRY: - priv->_agn.reply_tx_stats.bt_retry++; - break; - case TX_STATUS_FAIL_STA_INVALID: - priv->_agn.reply_tx_stats.sta_invalid++; - break; - case TX_STATUS_FAIL_FRAG_DROPPED: - priv->_agn.reply_tx_stats.frag_drop++; - break; - case TX_STATUS_FAIL_TID_DISABLE: - priv->_agn.reply_tx_stats.tid_disable++; - break; - case TX_STATUS_FAIL_FIFO_FLUSHED: - priv->_agn.reply_tx_stats.fifo_flush++; - break; - case TX_STATUS_FAIL_INSUFFICIENT_CF_POLL: - priv->_agn.reply_tx_stats.insuff_cf_poll++; - break; - case TX_STATUS_FAIL_PASSIVE_NO_RX: - priv->_agn.reply_tx_stats.fail_hw_drop++; - break; - case TX_STATUS_FAIL_NO_BEACON_ON_RADAR: - priv->_agn.reply_tx_stats.sta_color_mismatch++; - break; - default: - priv->_agn.reply_tx_stats.unknown++; - break; - } -} - -static void iwlagn_count_agg_tx_err_status(struct iwl_priv *priv, u16 status) -{ - status &= AGG_TX_STATUS_MSK; - - switch (status) { - case AGG_TX_STATE_UNDERRUN_MSK: - priv->_agn.reply_agg_tx_stats.underrun++; - break; - case AGG_TX_STATE_BT_PRIO_MSK: - priv->_agn.reply_agg_tx_stats.bt_prio++; - break; - case AGG_TX_STATE_FEW_BYTES_MSK: - priv->_agn.reply_agg_tx_stats.few_bytes++; - break; - case AGG_TX_STATE_ABORT_MSK: - priv->_agn.reply_agg_tx_stats.abort++; - break; - case AGG_TX_STATE_LAST_SENT_TTL_MSK: - priv->_agn.reply_agg_tx_stats.last_sent_ttl++; - break; - case AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK: - priv->_agn.reply_agg_tx_stats.last_sent_try++; - break; - case AGG_TX_STATE_LAST_SENT_BT_KILL_MSK: - priv->_agn.reply_agg_tx_stats.last_sent_bt_kill++; - break; - case AGG_TX_STATE_SCD_QUERY_MSK: - priv->_agn.reply_agg_tx_stats.scd_query++; - break; - case AGG_TX_STATE_TEST_BAD_CRC32_MSK: - priv->_agn.reply_agg_tx_stats.bad_crc32++; - break; - case AGG_TX_STATE_RESPONSE_MSK: - priv->_agn.reply_agg_tx_stats.response++; - break; - case AGG_TX_STATE_DUMP_TX_MSK: - priv->_agn.reply_agg_tx_stats.dump_tx++; - break; - case AGG_TX_STATE_DELAY_TX_MSK: - priv->_agn.reply_agg_tx_stats.delay_tx++; - break; - default: - priv->_agn.reply_agg_tx_stats.unknown++; - break; - } -} - -static void iwlagn_set_tx_status(struct iwl_priv *priv, - struct ieee80211_tx_info *info, - struct iwlagn_tx_resp *tx_resp, - int txq_id, bool is_agg) -{ - u16 status = le16_to_cpu(tx_resp->status.status); - - info->status.rates[0].count = tx_resp->failure_frame + 1; - if (is_agg) - info->flags &= ~IEEE80211_TX_CTL_AMPDU; - info->flags |= iwl_tx_status_to_mac80211(status); - iwlagn_hwrate_to_tx_control(priv, le32_to_cpu(tx_resp->rate_n_flags), - info); - if (!iwl_is_tx_success(status)) - iwlagn_count_tx_err_status(priv, status); - - IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x) rate_n_flags " - "0x%x retries %d\n", - txq_id, - iwl_get_tx_fail_reason(status), status, - le32_to_cpu(tx_resp->rate_n_flags), - tx_resp->failure_frame); -} - -#ifdef CONFIG_IWLWIFI_DEBUG -#define AGG_TX_STATE_FAIL(x) case AGG_TX_STATE_ ## x: return #x - -const char *iwl_get_agg_tx_fail_reason(u16 status) -{ - status &= AGG_TX_STATUS_MSK; - switch (status) { - case AGG_TX_STATE_TRANSMITTED: - return "SUCCESS"; - AGG_TX_STATE_FAIL(UNDERRUN_MSK); - AGG_TX_STATE_FAIL(BT_PRIO_MSK); - AGG_TX_STATE_FAIL(FEW_BYTES_MSK); - AGG_TX_STATE_FAIL(ABORT_MSK); - AGG_TX_STATE_FAIL(LAST_SENT_TTL_MSK); - AGG_TX_STATE_FAIL(LAST_SENT_TRY_CNT_MSK); - AGG_TX_STATE_FAIL(LAST_SENT_BT_KILL_MSK); - AGG_TX_STATE_FAIL(SCD_QUERY_MSK); - AGG_TX_STATE_FAIL(TEST_BAD_CRC32_MSK); - AGG_TX_STATE_FAIL(RESPONSE_MSK); - AGG_TX_STATE_FAIL(DUMP_TX_MSK); - AGG_TX_STATE_FAIL(DELAY_TX_MSK); - } - - return "UNKNOWN"; -} -#endif /* CONFIG_IWLWIFI_DEBUG */ - -static int iwlagn_tx_status_reply_tx(struct iwl_priv *priv, - struct iwl_ht_agg *agg, - struct iwlagn_tx_resp *tx_resp, - int txq_id, u16 start_idx) -{ - u16 status; - struct agg_tx_status *frame_status = &tx_resp->status; - struct ieee80211_hdr *hdr = NULL; - int i, sh, idx; - u16 seq; - - if (agg->wait_for_ba) - IWL_DEBUG_TX_REPLY(priv, "got tx response w/o block-ack\n"); - - agg->frame_count = tx_resp->frame_count; - agg->start_idx = start_idx; - agg->rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags); - agg->bitmap = 0; - - /* # frames attempted by Tx command */ - if (agg->frame_count == 1) { - /* Only one frame was attempted; no block-ack will arrive */ - idx = start_idx; - - IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, StartIdx=%d idx=%d\n", - agg->frame_count, agg->start_idx, idx); - iwlagn_set_tx_status(priv, - IEEE80211_SKB_CB( - priv->txq[txq_id].txb[idx].skb), - tx_resp, txq_id, true); - agg->wait_for_ba = 0; - } else { - /* Two or more frames were attempted; expect block-ack */ - u64 bitmap = 0; - - /* - * Start is the lowest frame sent. It may not be the first - * frame in the batch; we figure this out dynamically during - * the following loop. - */ - int start = agg->start_idx; - - /* Construct bit-map of pending frames within Tx window */ - for (i = 0; i < agg->frame_count; i++) { - u16 sc; - status = le16_to_cpu(frame_status[i].status); - seq = le16_to_cpu(frame_status[i].sequence); - idx = SEQ_TO_INDEX(seq); - txq_id = SEQ_TO_QUEUE(seq); - - if (status & AGG_TX_STATUS_MSK) - iwlagn_count_agg_tx_err_status(priv, status); - - if (status & (AGG_TX_STATE_FEW_BYTES_MSK | - AGG_TX_STATE_ABORT_MSK)) - continue; - - IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, txq_id=%d idx=%d\n", - agg->frame_count, txq_id, idx); - IWL_DEBUG_TX_REPLY(priv, "status %s (0x%08x), " - "try-count (0x%08x)\n", - iwl_get_agg_tx_fail_reason(status), - status & AGG_TX_STATUS_MSK, - status & AGG_TX_TRY_MSK); - - hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx); - if (!hdr) { - IWL_ERR(priv, - "BUG_ON idx doesn't point to valid skb" - " idx=%d, txq_id=%d\n", idx, txq_id); - return -1; - } - - sc = le16_to_cpu(hdr->seq_ctrl); - if (idx != (SEQ_TO_SN(sc) & 0xff)) { - IWL_ERR(priv, - "BUG_ON idx doesn't match seq control" - " idx=%d, seq_idx=%d, seq=%d\n", - idx, SEQ_TO_SN(sc), - hdr->seq_ctrl); - return -1; - } - - IWL_DEBUG_TX_REPLY(priv, "AGG Frame i=%d idx %d seq=%d\n", - i, idx, SEQ_TO_SN(sc)); - - /* - * sh -> how many frames ahead of the starting frame is - * the current one? - * - * Note that all frames sent in the batch must be in a - * 64-frame window, so this number should be in [0,63]. - * If outside of this window, then we've found a new - * "first" frame in the batch and need to change start. - */ - sh = idx - start; - - /* - * If >= 64, out of window. start must be at the front - * of the circular buffer, idx must be near the end of - * the buffer, and idx is the new "first" frame. Shift - * the indices around. - */ - if (sh >= 64) { - /* Shift bitmap by start - idx, wrapped */ - sh = 0x100 - idx + start; - bitmap = bitmap << sh; - /* Now idx is the new start so sh = 0 */ - sh = 0; - start = idx; - /* - * If <= -64 then wraps the 256-pkt circular buffer - * (e.g., start = 255 and idx = 0, sh should be 1) - */ - } else if (sh <= -64) { - sh = 0x100 - start + idx; - /* - * If < 0 but > -64, out of window. idx is before start - * but not wrapped. Shift the indices around. - */ - } else if (sh < 0) { - /* Shift by how far start is ahead of idx */ - sh = start - idx; - bitmap = bitmap << sh; - /* Now idx is the new start so sh = 0 */ - start = idx; - sh = 0; - } - /* Sequence number start + sh was sent in this batch */ - bitmap |= 1ULL << sh; - IWL_DEBUG_TX_REPLY(priv, "start=%d bitmap=0x%llx\n", - start, (unsigned long long)bitmap); - } - - /* - * Store the bitmap and possibly the new start, if we wrapped - * the buffer above - */ - agg->bitmap = bitmap; - agg->start_idx = start; - IWL_DEBUG_TX_REPLY(priv, "Frames %d start_idx=%d bitmap=0x%llx\n", - agg->frame_count, agg->start_idx, - (unsigned long long)agg->bitmap); - - if (bitmap) - agg->wait_for_ba = 1; - } - return 0; -} - -void iwl_check_abort_status(struct iwl_priv *priv, - u8 frame_count, u32 status) -{ - if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) { - IWL_ERR(priv, "Tx flush command to flush out all frames\n"); - if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) - queue_work(priv->workqueue, &priv->tx_flush); - } -} - -static void iwlagn_rx_reply_tx(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - u16 sequence = le16_to_cpu(pkt->hdr.sequence); - int txq_id = SEQ_TO_QUEUE(sequence); - int index = SEQ_TO_INDEX(sequence); - struct iwl_tx_queue *txq = &priv->txq[txq_id]; - struct ieee80211_tx_info *info; - struct iwlagn_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; - u32 status = le16_to_cpu(tx_resp->status.status); - int tid; - int sta_id; - int freed; - unsigned long flags; - - if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) { - IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d " - "is out of range [0-%d] %d %d\n", txq_id, - index, txq->q.n_bd, txq->q.write_ptr, - txq->q.read_ptr); - return; - } - - info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb); - memset(&info->status, 0, sizeof(info->status)); - - tid = (tx_resp->ra_tid & IWLAGN_TX_RES_TID_MSK) >> - IWLAGN_TX_RES_TID_POS; - sta_id = (tx_resp->ra_tid & IWLAGN_TX_RES_RA_MSK) >> - IWLAGN_TX_RES_RA_POS; - - spin_lock_irqsave(&priv->sta_lock, flags); - if (txq->sched_retry) { - const u32 scd_ssn = iwlagn_get_scd_ssn(tx_resp); - struct iwl_ht_agg *agg; - - agg = &priv->stations[sta_id].tid[tid].agg; - /* - * If the BT kill count is non-zero, we'll get this - * notification again. - */ - if (tx_resp->bt_kill_count && tx_resp->frame_count == 1 && - priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist) { - IWL_WARN(priv, "receive reply tx with bt_kill\n"); - } - iwlagn_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index); - - /* check if BAR is needed */ - if ((tx_resp->frame_count == 1) && !iwl_is_tx_success(status)) - info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; - - if (txq->q.read_ptr != (scd_ssn & 0xff)) { - index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd); - IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim " - "scd_ssn=%d idx=%d txq=%d swq=%d\n", - scd_ssn , index, txq_id, txq->swq_id); - - freed = iwlagn_tx_queue_reclaim(priv, txq_id, index); - iwl_free_tfds_in_queue(priv, sta_id, tid, freed); - - if (priv->mac80211_registered && - (iwl_queue_space(&txq->q) > txq->q.low_mark) && - (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) - iwl_wake_queue(priv, txq); - } - } else { - iwlagn_set_tx_status(priv, info, tx_resp, txq_id, false); - freed = iwlagn_tx_queue_reclaim(priv, txq_id, index); - iwl_free_tfds_in_queue(priv, sta_id, tid, freed); - - if (priv->mac80211_registered && - (iwl_queue_space(&txq->q) > txq->q.low_mark)) - iwl_wake_queue(priv, txq); - } - - iwlagn_txq_check_empty(priv, sta_id, tid, txq_id); - - iwl_check_abort_status(priv, tx_resp->frame_count, status); - spin_unlock_irqrestore(&priv->sta_lock, flags); -} - -void iwlagn_rx_handler_setup(struct iwl_priv *priv) -{ - /* init calibration handlers */ - priv->rx_handlers[CALIBRATION_RES_NOTIFICATION] = - iwlagn_rx_calib_result; - priv->rx_handlers[CALIBRATION_COMPLETE_NOTIFICATION] = - iwlagn_rx_calib_complete; - priv->rx_handlers[REPLY_TX] = iwlagn_rx_reply_tx; -} - -void iwlagn_setup_deferred_work(struct iwl_priv *priv) -{ - /* in agn, the tx power calibration is done in uCode */ - priv->disable_tx_power_cal = 1; -} - -int iwlagn_hw_valid_rtc_data_addr(u32 addr) -{ - return (addr >= IWLAGN_RTC_DATA_LOWER_BOUND) && - (addr < IWLAGN_RTC_DATA_UPPER_BOUND); -} - -int iwlagn_send_tx_power(struct iwl_priv *priv) -{ - struct iwlagn_tx_power_dbm_cmd tx_power_cmd; - u8 tx_ant_cfg_cmd; - - if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status), - "TX Power requested while scanning!\n")) - return -EAGAIN; - - /* half dBm need to multiply */ - tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt); - - if (priv->tx_power_lmt_in_half_dbm && - priv->tx_power_lmt_in_half_dbm < tx_power_cmd.global_lmt) { - /* - * For the newer devices which using enhanced/extend tx power - * table in EEPROM, the format is in half dBm. driver need to - * convert to dBm format before report to mac80211. - * By doing so, there is a possibility of 1/2 dBm resolution - * lost. driver will perform "round-up" operation before - * reporting, but it will cause 1/2 dBm tx power over the - * regulatory limit. Perform the checking here, if the - * "tx_power_user_lmt" is higher than EEPROM value (in - * half-dBm format), lower the tx power based on EEPROM - */ - tx_power_cmd.global_lmt = priv->tx_power_lmt_in_half_dbm; - } - tx_power_cmd.flags = IWLAGN_TX_POWER_NO_CLOSED; - tx_power_cmd.srv_chan_lmt = IWLAGN_TX_POWER_AUTO; - - if (IWL_UCODE_API(priv->ucode_ver) == 1) - tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD_V1; - else - tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD; - - return iwl_send_cmd_pdu(priv, tx_ant_cfg_cmd, sizeof(tx_power_cmd), - &tx_power_cmd); -} - -void iwlagn_temperature(struct iwl_priv *priv) -{ - /* store temperature from statistics (in Celsius) */ - priv->temperature = - le32_to_cpu(priv->_agn.statistics.general.common.temperature); - iwl_tt_handler(priv); -} - -u16 iwlagn_eeprom_calib_version(struct iwl_priv *priv) -{ - struct iwl_eeprom_calib_hdr { - u8 version; - u8 pa_type; - u16 voltage; - } *hdr; - - hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(priv, - EEPROM_CALIB_ALL); - return hdr->version; - -} - -/* - * EEPROM - */ -static u32 eeprom_indirect_address(const struct iwl_priv *priv, u32 address) -{ - u16 offset = 0; - - if ((address & INDIRECT_ADDRESS) == 0) - return address; - - switch (address & INDIRECT_TYPE_MSK) { - case INDIRECT_HOST: - offset = iwl_eeprom_query16(priv, EEPROM_LINK_HOST); - break; - case INDIRECT_GENERAL: - offset = iwl_eeprom_query16(priv, EEPROM_LINK_GENERAL); - break; - case INDIRECT_REGULATORY: - offset = iwl_eeprom_query16(priv, EEPROM_LINK_REGULATORY); - break; - case INDIRECT_CALIBRATION: - offset = iwl_eeprom_query16(priv, EEPROM_LINK_CALIBRATION); - break; - case INDIRECT_PROCESS_ADJST: - offset = iwl_eeprom_query16(priv, EEPROM_LINK_PROCESS_ADJST); - break; - case INDIRECT_OTHERS: - offset = iwl_eeprom_query16(priv, EEPROM_LINK_OTHERS); - break; - default: - IWL_ERR(priv, "illegal indirect type: 0x%X\n", - address & INDIRECT_TYPE_MSK); - break; - } - - /* translate the offset from words to byte */ - return (address & ADDRESS_MSK) + (offset << 1); -} - -const u8 *iwlagn_eeprom_query_addr(const struct iwl_priv *priv, - size_t offset) -{ - u32 address = eeprom_indirect_address(priv, offset); - BUG_ON(address >= priv->cfg->base_params->eeprom_size); - return &priv->eeprom[address]; -} - -struct iwl_mod_params iwlagn_mod_params = { - .amsdu_size_8K = 1, - .restart_fw = 1, - /* the rest are 0 by default */ -}; - -void iwlagn_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) -{ - unsigned long flags; - int i; - spin_lock_irqsave(&rxq->lock, flags); - INIT_LIST_HEAD(&rxq->rx_free); - INIT_LIST_HEAD(&rxq->rx_used); - /* Fill the rx_used queue with _all_ of the Rx buffers */ - for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { - /* In the reset function, these buffers may have been allocated - * to an SKB, so we need to unmap and free potential storage */ - if (rxq->pool[i].page != NULL) { - pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, - PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - __iwl_free_pages(priv, rxq->pool[i].page); - rxq->pool[i].page = NULL; - } - list_add_tail(&rxq->pool[i].list, &rxq->rx_used); - } - - for (i = 0; i < RX_QUEUE_SIZE; i++) - rxq->queue[i] = NULL; - - /* Set us so that we have processed and used all buffers, but have - * not restocked the Rx queue with fresh buffers */ - rxq->read = rxq->write = 0; - rxq->write_actual = 0; - rxq->free_count = 0; - spin_unlock_irqrestore(&rxq->lock, flags); -} - -int iwlagn_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq) -{ - u32 rb_size; - const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */ - u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT for all devices? */ - - if (!priv->cfg->base_params->use_isr_legacy) - rb_timeout = RX_RB_TIMEOUT; - - if (priv->cfg->mod_params->amsdu_size_8K) - rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; - else - rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; - - /* Stop Rx DMA */ - iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); - - /* Reset driver's Rx queue write index */ - iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); - - /* Tell device where to find RBD circular buffer in DRAM */ - iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG, - (u32)(rxq->bd_dma >> 8)); - - /* Tell device where in DRAM to update its Rx status */ - iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG, - rxq->rb_stts_dma >> 4); - - /* Enable Rx DMA - * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in - * the credit mechanism in 5000 HW RX FIFO - * Direct rx interrupts to hosts - * Rx buffer size 4 or 8k - * RB timeout 0x10 - * 256 RBDs - */ - iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, - FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | - FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY | - FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | - FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK | - rb_size| - (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)| - (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); - - /* Set interrupt coalescing timer to default (2048 usecs) */ - iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF); - - return 0; -} - -static void iwlagn_set_pwr_vmain(struct iwl_priv *priv) -{ -/* - * (for documentation purposes) - * to set power to V_AUX, do: - - if (pci_pme_capable(priv->pci_dev, PCI_D3cold)) - iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VAUX, - ~APMG_PS_CTRL_MSK_PWR_SRC); - */ - - iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, - ~APMG_PS_CTRL_MSK_PWR_SRC); -} - -int iwlagn_hw_nic_init(struct iwl_priv *priv) -{ - unsigned long flags; - struct iwl_rx_queue *rxq = &priv->rxq; - int ret; - - /* nic_init */ - spin_lock_irqsave(&priv->lock, flags); - priv->cfg->ops->lib->apm_ops.init(priv); - - /* Set interrupt coalescing calibration timer to default (512 usecs) */ - iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_CALIB_TIMEOUT_DEF); - - spin_unlock_irqrestore(&priv->lock, flags); - - iwlagn_set_pwr_vmain(priv); - - priv->cfg->ops->lib->apm_ops.config(priv); - - /* Allocate the RX queue, or reset if it is already allocated */ - if (!rxq->bd) { - ret = iwl_rx_queue_alloc(priv); - if (ret) { - IWL_ERR(priv, "Unable to initialize Rx queue\n"); - return -ENOMEM; - } - } else - iwlagn_rx_queue_reset(priv, rxq); - - iwlagn_rx_replenish(priv); - - iwlagn_rx_init(priv, rxq); - - spin_lock_irqsave(&priv->lock, flags); - - rxq->need_update = 1; - iwl_rx_queue_update_write_ptr(priv, rxq); - - spin_unlock_irqrestore(&priv->lock, flags); - - /* Allocate or reset and init all Tx and Command queues */ - if (!priv->txq) { - ret = iwlagn_txq_ctx_alloc(priv); - if (ret) - return ret; - } else - iwlagn_txq_ctx_reset(priv); - - if (priv->cfg->base_params->shadow_reg_enable) { - /* enable shadow regs in HW */ - iwl_set_bit(priv, CSR_MAC_SHADOW_REG_CTRL, - 0x800FFFFF); - } - - set_bit(STATUS_INIT, &priv->status); - - return 0; -} - -/** - * iwlagn_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr - */ -static inline __le32 iwlagn_dma_addr2rbd_ptr(struct iwl_priv *priv, - dma_addr_t dma_addr) -{ - return cpu_to_le32((u32)(dma_addr >> 8)); -} - -/** - * iwlagn_rx_queue_restock - refill RX queue from pre-allocated pool - * - * If there are slots in the RX queue that need to be restocked, - * and we have free pre-allocated buffers, fill the ranks as much - * as we can, pulling from rx_free. - * - * This moves the 'write' index forward to catch up with 'processed', and - * also updates the memory address in the firmware to reference the new - * target buffer. - */ -void iwlagn_rx_queue_restock(struct iwl_priv *priv) -{ - struct iwl_rx_queue *rxq = &priv->rxq; - struct list_head *element; - struct iwl_rx_mem_buffer *rxb; - unsigned long flags; - - spin_lock_irqsave(&rxq->lock, flags); - while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) { - /* The overwritten rxb must be a used one */ - rxb = rxq->queue[rxq->write]; - BUG_ON(rxb && rxb->page); - - /* Get next free Rx buffer, remove from free list */ - element = rxq->rx_free.next; - rxb = list_entry(element, struct iwl_rx_mem_buffer, list); - list_del(element); - - /* Point to Rx buffer via next RBD in circular buffer */ - rxq->bd[rxq->write] = iwlagn_dma_addr2rbd_ptr(priv, - rxb->page_dma); - rxq->queue[rxq->write] = rxb; - rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; - rxq->free_count--; - } - spin_unlock_irqrestore(&rxq->lock, flags); - /* If the pre-allocated buffer pool is dropping low, schedule to - * refill it */ - if (rxq->free_count <= RX_LOW_WATERMARK) - queue_work(priv->workqueue, &priv->rx_replenish); - - - /* If we've added more space for the firmware to place data, tell it. - * Increment device's write pointer in multiples of 8. */ - if (rxq->write_actual != (rxq->write & ~0x7)) { - spin_lock_irqsave(&rxq->lock, flags); - rxq->need_update = 1; - spin_unlock_irqrestore(&rxq->lock, flags); - iwl_rx_queue_update_write_ptr(priv, rxq); - } -} - -/** - * iwlagn_rx_replenish - Move all used packet from rx_used to rx_free - * - * When moving to rx_free an SKB is allocated for the slot. - * - * Also restock the Rx queue via iwl_rx_queue_restock. - * This is called as a scheduled work item (except for during initialization) - */ -void iwlagn_rx_allocate(struct iwl_priv *priv, gfp_t priority) -{ - struct iwl_rx_queue *rxq = &priv->rxq; - struct list_head *element; - struct iwl_rx_mem_buffer *rxb; - struct page *page; - unsigned long flags; - gfp_t gfp_mask = priority; - - while (1) { - spin_lock_irqsave(&rxq->lock, flags); - if (list_empty(&rxq->rx_used)) { - spin_unlock_irqrestore(&rxq->lock, flags); - return; - } - spin_unlock_irqrestore(&rxq->lock, flags); - - if (rxq->free_count > RX_LOW_WATERMARK) - gfp_mask |= __GFP_NOWARN; - - if (priv->hw_params.rx_page_order > 0) - gfp_mask |= __GFP_COMP; - - /* Alloc a new receive buffer */ - page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order); - if (!page) { - if (net_ratelimit()) - IWL_DEBUG_INFO(priv, "alloc_pages failed, " - "order: %d\n", - priv->hw_params.rx_page_order); - - if ((rxq->free_count <= RX_LOW_WATERMARK) && - net_ratelimit()) - IWL_CRIT(priv, "Failed to alloc_pages with %s. Only %u free buffers remaining.\n", - priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL", - rxq->free_count); - /* We don't reschedule replenish work here -- we will - * call the restock method and if it still needs - * more buffers it will schedule replenish */ - return; - } - - spin_lock_irqsave(&rxq->lock, flags); - - if (list_empty(&rxq->rx_used)) { - spin_unlock_irqrestore(&rxq->lock, flags); - __free_pages(page, priv->hw_params.rx_page_order); - return; - } - element = rxq->rx_used.next; - rxb = list_entry(element, struct iwl_rx_mem_buffer, list); - list_del(element); - - spin_unlock_irqrestore(&rxq->lock, flags); - - BUG_ON(rxb->page); - rxb->page = page; - /* Get physical address of the RB */ - rxb->page_dma = pci_map_page(priv->pci_dev, page, 0, - PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - /* dma address must be no more than 36 bits */ - BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36)); - /* and also 256 byte aligned! */ - BUG_ON(rxb->page_dma & DMA_BIT_MASK(8)); - - spin_lock_irqsave(&rxq->lock, flags); - - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; - priv->alloc_rxb_page++; - - spin_unlock_irqrestore(&rxq->lock, flags); - } -} - -void iwlagn_rx_replenish(struct iwl_priv *priv) -{ - unsigned long flags; - - iwlagn_rx_allocate(priv, GFP_KERNEL); - - spin_lock_irqsave(&priv->lock, flags); - iwlagn_rx_queue_restock(priv); - spin_unlock_irqrestore(&priv->lock, flags); -} - -void iwlagn_rx_replenish_now(struct iwl_priv *priv) -{ - iwlagn_rx_allocate(priv, GFP_ATOMIC); - - iwlagn_rx_queue_restock(priv); -} - -/* Assumes that the skb field of the buffers in 'pool' is kept accurate. - * If an SKB has been detached, the POOL needs to have its SKB set to NULL - * This free routine walks the list of POOL entries and if SKB is set to - * non NULL it is unmapped and freed - */ -void iwlagn_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) -{ - int i; - for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { - if (rxq->pool[i].page != NULL) { - pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, - PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - __iwl_free_pages(priv, rxq->pool[i].page); - rxq->pool[i].page = NULL; - } - } - - dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd, - rxq->bd_dma); - dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status), - rxq->rb_stts, rxq->rb_stts_dma); - rxq->bd = NULL; - rxq->rb_stts = NULL; -} - -int iwlagn_rxq_stop(struct iwl_priv *priv) -{ - - /* stop Rx DMA */ - iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); - iwl_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG, - FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000); - - return 0; -} - -int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band) -{ - int idx = 0; - int band_offset = 0; - - /* HT rate format: mac80211 wants an MCS number, which is just LSB */ - if (rate_n_flags & RATE_MCS_HT_MSK) { - idx = (rate_n_flags & 0xff); - return idx; - /* Legacy rate format, search for match in table */ - } else { - if (band == IEEE80211_BAND_5GHZ) - band_offset = IWL_FIRST_OFDM_RATE; - for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++) - if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF)) - return idx - band_offset; - } - - return -1; -} - -/* Calc max signal level (dBm) among 3 possible receivers */ -static inline int iwlagn_calc_rssi(struct iwl_priv *priv, - struct iwl_rx_phy_res *rx_resp) -{ - return priv->cfg->ops->utils->calc_rssi(priv, rx_resp); -} - -static u32 iwlagn_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in) -{ - u32 decrypt_out = 0; - - if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) == - RX_RES_STATUS_STATION_FOUND) - decrypt_out |= (RX_RES_STATUS_STATION_FOUND | - RX_RES_STATUS_NO_STATION_INFO_MISMATCH); - - decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK); - - /* packet was not encrypted */ - if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == - RX_RES_STATUS_SEC_TYPE_NONE) - return decrypt_out; - - /* packet was encrypted with unknown alg */ - if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == - RX_RES_STATUS_SEC_TYPE_ERR) - return decrypt_out; - - /* decryption was not done in HW */ - if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) != - RX_MPDU_RES_STATUS_DEC_DONE_MSK) - return decrypt_out; - - switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) { - - case RX_RES_STATUS_SEC_TYPE_CCMP: - /* alg is CCM: check MIC only */ - if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK)) - /* Bad MIC */ - decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; - else - decrypt_out |= RX_RES_STATUS_DECRYPT_OK; - - break; - - case RX_RES_STATUS_SEC_TYPE_TKIP: - if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) { - /* Bad TTAK */ - decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK; - break; - } - /* fall through if TTAK OK */ - default: - if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK)) - decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; - else - decrypt_out |= RX_RES_STATUS_DECRYPT_OK; - break; - } - - IWL_DEBUG_RX(priv, "decrypt_in:0x%x decrypt_out = 0x%x\n", - decrypt_in, decrypt_out); - - return decrypt_out; -} - -static void iwlagn_pass_packet_to_mac80211(struct iwl_priv *priv, - struct ieee80211_hdr *hdr, - u16 len, - u32 ampdu_status, - struct iwl_rx_mem_buffer *rxb, - struct ieee80211_rx_status *stats) -{ - struct sk_buff *skb; - __le16 fc = hdr->frame_control; - - /* We only process data packets if the interface is open */ - if (unlikely(!priv->is_open)) { - IWL_DEBUG_DROP_LIMIT(priv, - "Dropping packet while interface is not open.\n"); - return; - } - - /* In case of HW accelerated crypto and bad decryption, drop */ - if (!priv->cfg->mod_params->sw_crypto && - iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats)) - return; - - skb = dev_alloc_skb(128); - if (!skb) { - IWL_ERR(priv, "dev_alloc_skb failed\n"); - return; - } - - skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len); - - iwl_update_stats(priv, false, fc, len); - memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); - - ieee80211_rx(priv->hw, skb); - priv->alloc_rxb_page--; - rxb->page = NULL; -} - -/* Called for REPLY_RX (legacy ABG frames), or - * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */ -void iwlagn_rx_reply_rx(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct ieee80211_hdr *header; - struct ieee80211_rx_status rx_status; - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_rx_phy_res *phy_res; - __le32 rx_pkt_status; - struct iwl_rx_mpdu_res_start *amsdu; - u32 len; - u32 ampdu_status; - u32 rate_n_flags; - - /** - * REPLY_RX and REPLY_RX_MPDU_CMD are handled differently. - * REPLY_RX: physical layer info is in this buffer - * REPLY_RX_MPDU_CMD: physical layer info was sent in separate - * command and cached in priv->last_phy_res - * - * Here we set up local variables depending on which command is - * received. - */ - if (pkt->hdr.cmd == REPLY_RX) { - phy_res = (struct iwl_rx_phy_res *)pkt->u.raw; - header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res) - + phy_res->cfg_phy_cnt); - - len = le16_to_cpu(phy_res->byte_count); - rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*phy_res) + - phy_res->cfg_phy_cnt + len); - ampdu_status = le32_to_cpu(rx_pkt_status); - } else { - if (!priv->_agn.last_phy_res_valid) { - IWL_ERR(priv, "MPDU frame without cached PHY data\n"); - return; - } - phy_res = &priv->_agn.last_phy_res; - amsdu = (struct iwl_rx_mpdu_res_start *)pkt->u.raw; - header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu)); - len = le16_to_cpu(amsdu->byte_count); - rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*amsdu) + len); - ampdu_status = iwlagn_translate_rx_status(priv, - le32_to_cpu(rx_pkt_status)); - } - - if ((unlikely(phy_res->cfg_phy_cnt > 20))) { - IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n", - phy_res->cfg_phy_cnt); - return; - } - - if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) || - !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { - IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n", - le32_to_cpu(rx_pkt_status)); - return; - } - - /* This will be used in several places later */ - rate_n_flags = le32_to_cpu(phy_res->rate_n_flags); - - /* rx_status carries information about the packet to mac80211 */ - rx_status.mactime = le64_to_cpu(phy_res->timestamp); - rx_status.freq = - ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel)); - rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? - IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; - rx_status.rate_idx = - iwlagn_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band); - rx_status.flag = 0; - - /* TSF isn't reliable. In order to allow smooth user experience, - * this W/A doesn't propagate it to the mac80211 */ - /*rx_status.flag |= RX_FLAG_TSFT;*/ - - priv->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp); - - /* Find max signal strength (dBm) among 3 antenna/receiver chains */ - rx_status.signal = iwlagn_calc_rssi(priv, phy_res); - - iwl_dbg_log_rx_data_frame(priv, len, header); - IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, TSF %llu\n", - rx_status.signal, (unsigned long long)rx_status.mactime); - - /* - * "antenna number" - * - * It seems that the antenna field in the phy flags value - * is actually a bit field. This is undefined by radiotap, - * it wants an actual antenna number but I always get "7" - * for most legacy frames I receive indicating that the - * same frame was received on all three RX chains. - * - * I think this field should be removed in favor of a - * new 802.11n radiotap field "RX chains" that is defined - * as a bitmask. - */ - rx_status.antenna = - (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) - >> RX_RES_PHY_FLAGS_ANTENNA_POS; - - /* set the preamble flag if appropriate */ - if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) - rx_status.flag |= RX_FLAG_SHORTPRE; - - /* Set up the HT phy flags */ - if (rate_n_flags & RATE_MCS_HT_MSK) - rx_status.flag |= RX_FLAG_HT; - if (rate_n_flags & RATE_MCS_HT40_MSK) - rx_status.flag |= RX_FLAG_40MHZ; - if (rate_n_flags & RATE_MCS_SGI_MSK) - rx_status.flag |= RX_FLAG_SHORT_GI; - - iwlagn_pass_packet_to_mac80211(priv, header, len, ampdu_status, - rxb, &rx_status); -} - -/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD). - * This will be used later in iwl_rx_reply_rx() for REPLY_RX_MPDU_CMD. */ -void iwlagn_rx_reply_rx_phy(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - priv->_agn.last_phy_res_valid = true; - memcpy(&priv->_agn.last_phy_res, pkt->u.raw, - sizeof(struct iwl_rx_phy_res)); -} - -static int iwl_get_single_channel_for_scan(struct iwl_priv *priv, - struct ieee80211_vif *vif, - enum ieee80211_band band, - struct iwl_scan_channel *scan_ch) -{ - const struct ieee80211_supported_band *sband; - u16 passive_dwell = 0; - u16 active_dwell = 0; - int added = 0; - u16 channel = 0; - - sband = iwl_get_hw_mode(priv, band); - if (!sband) { - IWL_ERR(priv, "invalid band\n"); - return added; - } - - active_dwell = iwl_get_active_dwell_time(priv, band, 0); - passive_dwell = iwl_get_passive_dwell_time(priv, band, vif); - - if (passive_dwell <= active_dwell) - passive_dwell = active_dwell + 1; - - channel = iwl_get_single_channel_number(priv, band); - if (channel) { - scan_ch->channel = cpu_to_le16(channel); - scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; - scan_ch->active_dwell = cpu_to_le16(active_dwell); - scan_ch->passive_dwell = cpu_to_le16(passive_dwell); - /* Set txpower levels to defaults */ - scan_ch->dsp_atten = 110; - if (band == IEEE80211_BAND_5GHZ) - scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; - else - scan_ch->tx_gain = ((1 << 5) | (5 << 3)); - added++; - } else - IWL_ERR(priv, "no valid channel found\n"); - return added; -} - -static int iwl_get_channels_for_scan(struct iwl_priv *priv, - struct ieee80211_vif *vif, - enum ieee80211_band band, - u8 is_active, u8 n_probes, - struct iwl_scan_channel *scan_ch) -{ - struct ieee80211_channel *chan; - const struct ieee80211_supported_band *sband; - const struct iwl_channel_info *ch_info; - u16 passive_dwell = 0; - u16 active_dwell = 0; - int added, i; - u16 channel; - - sband = iwl_get_hw_mode(priv, band); - if (!sband) - return 0; - - active_dwell = iwl_get_active_dwell_time(priv, band, n_probes); - passive_dwell = iwl_get_passive_dwell_time(priv, band, vif); - - if (passive_dwell <= active_dwell) - passive_dwell = active_dwell + 1; - - for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) { - chan = priv->scan_request->channels[i]; - - if (chan->band != band) - continue; - - channel = chan->hw_value; - scan_ch->channel = cpu_to_le16(channel); - - ch_info = iwl_get_channel_info(priv, band, channel); - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n", - channel); - continue; - } - - if (!is_active || is_channel_passive(ch_info) || - (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) - scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; - else - scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; - - if (n_probes) - scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes); - - scan_ch->active_dwell = cpu_to_le16(active_dwell); - scan_ch->passive_dwell = cpu_to_le16(passive_dwell); - - /* Set txpower levels to defaults */ - scan_ch->dsp_atten = 110; - - /* NOTE: if we were doing 6Mb OFDM for scans we'd use - * power level: - * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; - */ - if (band == IEEE80211_BAND_5GHZ) - scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; - else - scan_ch->tx_gain = ((1 << 5) | (5 << 3)); - - IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n", - channel, le32_to_cpu(scan_ch->type), - (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? - "ACTIVE" : "PASSIVE", - (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? - active_dwell : passive_dwell); - - scan_ch++; - added++; - } - - IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added); - return added; -} - -int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) -{ - struct iwl_host_cmd cmd = { - .id = REPLY_SCAN_CMD, - .len = sizeof(struct iwl_scan_cmd), - .flags = CMD_SIZE_HUGE, - }; - struct iwl_scan_cmd *scan; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - u32 rate_flags = 0; - u16 cmd_len; - u16 rx_chain = 0; - enum ieee80211_band band; - u8 n_probes = 0; - u8 rx_ant = priv->hw_params.valid_rx_ant; - u8 rate; - bool is_active = false; - int chan_mod; - u8 active_chains; - u8 scan_tx_antennas = priv->hw_params.valid_tx_ant; - int ret; - - lockdep_assert_held(&priv->mutex); - - if (vif) - ctx = iwl_rxon_ctx_from_vif(vif); - - if (!priv->scan_cmd) { - priv->scan_cmd = kmalloc(sizeof(struct iwl_scan_cmd) + - IWL_MAX_SCAN_SIZE, GFP_KERNEL); - if (!priv->scan_cmd) { - IWL_DEBUG_SCAN(priv, - "fail to allocate memory for scan\n"); - return -ENOMEM; - } - } - scan = priv->scan_cmd; - memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE); - - scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH; - scan->quiet_time = IWL_ACTIVE_QUIET_TIME; - - if (iwl_is_any_associated(priv)) { - u16 interval = 0; - u32 extra; - u32 suspend_time = 100; - u32 scan_suspend_time = 100; - unsigned long flags; - - IWL_DEBUG_INFO(priv, "Scanning while associated...\n"); - spin_lock_irqsave(&priv->lock, flags); - if (priv->is_internal_short_scan) - interval = 0; - else - interval = vif->bss_conf.beacon_int; - spin_unlock_irqrestore(&priv->lock, flags); - - scan->suspend_time = 0; - scan->max_out_time = cpu_to_le32(200 * 1024); - if (!interval) - interval = suspend_time; - - extra = (suspend_time / interval) << 22; - scan_suspend_time = (extra | - ((suspend_time % interval) * 1024)); - scan->suspend_time = cpu_to_le32(scan_suspend_time); - IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n", - scan_suspend_time, interval); - } - - if (priv->is_internal_short_scan) { - IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n"); - } else if (priv->scan_request->n_ssids) { - int i, p = 0; - IWL_DEBUG_SCAN(priv, "Kicking off active scan\n"); - for (i = 0; i < priv->scan_request->n_ssids; i++) { - /* always does wildcard anyway */ - if (!priv->scan_request->ssids[i].ssid_len) - continue; - scan->direct_scan[p].id = WLAN_EID_SSID; - scan->direct_scan[p].len = - priv->scan_request->ssids[i].ssid_len; - memcpy(scan->direct_scan[p].ssid, - priv->scan_request->ssids[i].ssid, - priv->scan_request->ssids[i].ssid_len); - n_probes++; - p++; - } - is_active = true; - } else - IWL_DEBUG_SCAN(priv, "Start passive scan.\n"); - - scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; - scan->tx_cmd.sta_id = ctx->bcast_sta_id; - scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - - switch (priv->scan_band) { - case IEEE80211_BAND_2GHZ: - scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; - chan_mod = le32_to_cpu( - priv->contexts[IWL_RXON_CTX_BSS].active.flags & - RXON_FLG_CHANNEL_MODE_MSK) - >> RXON_FLG_CHANNEL_MODE_POS; - if (chan_mod == CHANNEL_MODE_PURE_40) { - rate = IWL_RATE_6M_PLCP; - } else { - rate = IWL_RATE_1M_PLCP; - rate_flags = RATE_MCS_CCK_MSK; - } - /* - * Internal scans are passive, so we can indiscriminately set - * the BT ignore flag on 2.4 GHz since it applies to TX only. - */ - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist) - scan->tx_cmd.tx_flags |= TX_CMD_FLG_IGNORE_BT; - break; - case IEEE80211_BAND_5GHZ: - rate = IWL_RATE_6M_PLCP; - break; - default: - IWL_WARN(priv, "Invalid scan band\n"); - return -EIO; - } - - /* - * If active scanning is requested but a certain channel is - * marked passive, we can do active scanning if we detect - * transmissions. - * - * There is an issue with some firmware versions that triggers - * a sysassert on a "good CRC threshold" of zero (== disabled), - * on a radar channel even though this means that we should NOT - * send probes. - * - * The "good CRC threshold" is the number of frames that we - * need to receive during our dwell time on a channel before - * sending out probes -- setting this to a huge value will - * mean we never reach it, but at the same time work around - * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER - * here instead of IWL_GOOD_CRC_TH_DISABLED. - */ - scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT : - IWL_GOOD_CRC_TH_NEVER; - - band = priv->scan_band; - - if (priv->cfg->scan_rx_antennas[band]) - rx_ant = priv->cfg->scan_rx_antennas[band]; - - if (priv->cfg->scan_tx_antennas[band]) - scan_tx_antennas = priv->cfg->scan_tx_antennas[band]; - - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist && - priv->bt_full_concurrent) { - /* operated as 1x1 in full concurrency mode */ - scan_tx_antennas = first_antenna( - priv->cfg->scan_tx_antennas[band]); - } - - priv->scan_tx_ant[band] = iwl_toggle_tx_ant(priv, priv->scan_tx_ant[band], - scan_tx_antennas); - rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]); - scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags); - - /* In power save mode use one chain, otherwise use all chains */ - if (test_bit(STATUS_POWER_PMI, &priv->status)) { - /* rx_ant has been set to all valid chains previously */ - active_chains = rx_ant & - ((u8)(priv->chain_noise_data.active_chains)); - if (!active_chains) - active_chains = rx_ant; - - IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n", - priv->chain_noise_data.active_chains); - - rx_ant = first_antenna(active_chains); - } - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist && - priv->bt_full_concurrent) { - /* operated as 1x1 in full concurrency mode */ - rx_ant = first_antenna(rx_ant); - } - - /* MIMO is not used here, but value is required */ - rx_chain |= priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS; - rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; - rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS; - rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS; - scan->rx_chain = cpu_to_le16(rx_chain); - if (!priv->is_internal_short_scan) { - cmd_len = iwl_fill_probe_req(priv, - (struct ieee80211_mgmt *)scan->data, - vif->addr, - priv->scan_request->ie, - priv->scan_request->ie_len, - IWL_MAX_SCAN_SIZE - sizeof(*scan)); - } else { - /* use bcast addr, will not be transmitted but must be valid */ - cmd_len = iwl_fill_probe_req(priv, - (struct ieee80211_mgmt *)scan->data, - iwl_bcast_addr, NULL, 0, - IWL_MAX_SCAN_SIZE - sizeof(*scan)); - - } - scan->tx_cmd.len = cpu_to_le16(cmd_len); - - scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK | - RXON_FILTER_BCON_AWARE_MSK); - - if (priv->is_internal_short_scan) { - scan->channel_count = - iwl_get_single_channel_for_scan(priv, vif, band, - (void *)&scan->data[le16_to_cpu( - scan->tx_cmd.len)]); - } else { - scan->channel_count = - iwl_get_channels_for_scan(priv, vif, band, - is_active, n_probes, - (void *)&scan->data[le16_to_cpu( - scan->tx_cmd.len)]); - } - if (scan->channel_count == 0) { - IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count); - return -EIO; - } - - cmd.len += le16_to_cpu(scan->tx_cmd.len) + - scan->channel_count * sizeof(struct iwl_scan_channel); - cmd.data = scan; - scan->len = cpu_to_le16(cmd.len); - - /* set scan bit here for PAN params */ - set_bit(STATUS_SCAN_HW, &priv->status); - - if (priv->cfg->ops->hcmd->set_pan_params) { - ret = priv->cfg->ops->hcmd->set_pan_params(priv); - if (ret) - return ret; - } - - ret = iwl_send_cmd_sync(priv, &cmd); - if (ret) { - clear_bit(STATUS_SCAN_HW, &priv->status); - if (priv->cfg->ops->hcmd->set_pan_params) - priv->cfg->ops->hcmd->set_pan_params(priv); - } - - return ret; -} - -int iwlagn_manage_ibss_station(struct iwl_priv *priv, - struct ieee80211_vif *vif, bool add) -{ - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - - if (add) - return iwlagn_add_bssid_station(priv, vif_priv->ctx, - vif->bss_conf.bssid, - &vif_priv->ibss_bssid_sta_id); - return iwl_remove_station(priv, vif_priv->ibss_bssid_sta_id, - vif->bss_conf.bssid); -} - -void iwl_free_tfds_in_queue(struct iwl_priv *priv, - int sta_id, int tid, int freed) -{ - lockdep_assert_held(&priv->sta_lock); - - if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed) - priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; - else { - IWL_DEBUG_TX(priv, "free more than tfds_in_queue (%u:%d)\n", - priv->stations[sta_id].tid[tid].tfds_in_queue, - freed); - priv->stations[sta_id].tid[tid].tfds_in_queue = 0; - } -} - -#define IWL_FLUSH_WAIT_MS 2000 - -int iwlagn_wait_tx_queue_empty(struct iwl_priv *priv) -{ - struct iwl_tx_queue *txq; - struct iwl_queue *q; - int cnt; - unsigned long now = jiffies; - int ret = 0; - - /* waiting for all the tx frames complete might take a while */ - for (cnt = 0; cnt < priv->hw_params.max_txq_num; cnt++) { - if (cnt == priv->cmd_queue) - continue; - txq = &priv->txq[cnt]; - q = &txq->q; - while (q->read_ptr != q->write_ptr && !time_after(jiffies, - now + msecs_to_jiffies(IWL_FLUSH_WAIT_MS))) - msleep(1); - - if (q->read_ptr != q->write_ptr) { - IWL_ERR(priv, "fail to flush all tx fifo queues\n"); - ret = -ETIMEDOUT; - break; - } - } - return ret; -} - -#define IWL_TX_QUEUE_MSK 0xfffff - -/** - * iwlagn_txfifo_flush: send REPLY_TXFIFO_FLUSH command to uCode - * - * pre-requirements: - * 1. acquire mutex before calling - * 2. make sure rf is on and not in exit state - */ -int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control) -{ - struct iwl_txfifo_flush_cmd flush_cmd; - struct iwl_host_cmd cmd = { - .id = REPLY_TXFIFO_FLUSH, - .len = sizeof(struct iwl_txfifo_flush_cmd), - .flags = CMD_SYNC, - .data = &flush_cmd, - }; - - might_sleep(); - - memset(&flush_cmd, 0, sizeof(flush_cmd)); - flush_cmd.fifo_control = IWL_TX_FIFO_VO_MSK | IWL_TX_FIFO_VI_MSK | - IWL_TX_FIFO_BE_MSK | IWL_TX_FIFO_BK_MSK; - if (priv->cfg->sku & IWL_SKU_N) - flush_cmd.fifo_control |= IWL_AGG_TX_QUEUE_MSK; - - IWL_DEBUG_INFO(priv, "fifo queue control: 0X%x\n", - flush_cmd.fifo_control); - flush_cmd.flush_control = cpu_to_le16(flush_control); - - return iwl_send_cmd(priv, &cmd); -} - -void iwlagn_dev_txfifo_flush(struct iwl_priv *priv, u16 flush_control) -{ - mutex_lock(&priv->mutex); - ieee80211_stop_queues(priv->hw); - if (priv->cfg->ops->lib->txfifo_flush(priv, IWL_DROP_ALL)) { - IWL_ERR(priv, "flush request fail\n"); - goto done; - } - IWL_DEBUG_INFO(priv, "wait transmit/flush all frames\n"); - iwlagn_wait_tx_queue_empty(priv); -done: - ieee80211_wake_queues(priv->hw); - mutex_unlock(&priv->mutex); -} - -/* - * BT coex - */ -/* - * Macros to access the lookup table. - * - * The lookup table has 7 inputs: bt3_prio, bt3_txrx, bt_rf_act, wifi_req, -* wifi_prio, wifi_txrx and wifi_sh_ant_req. - * - * It has three outputs: WLAN_ACTIVE, WLAN_KILL and ANT_SWITCH - * - * The format is that "registers" 8 through 11 contain the WLAN_ACTIVE bits - * one after another in 32-bit registers, and "registers" 0 through 7 contain - * the WLAN_KILL and ANT_SWITCH bits interleaved (in that order). - * - * These macros encode that format. - */ -#define LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, wifi_req, wifi_prio, \ - wifi_txrx, wifi_sh_ant_req) \ - (bt3_prio | (bt3_txrx << 1) | (bt_rf_act << 2) | (wifi_req << 3) | \ - (wifi_prio << 4) | (wifi_txrx << 5) | (wifi_sh_ant_req << 6)) - -#define LUT_PTA_WLAN_ACTIVE_OP(lut, op, val) \ - lut[8 + ((val) >> 5)] op (cpu_to_le32(BIT((val) & 0x1f))) -#define LUT_TEST_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ - wifi_prio, wifi_txrx, wifi_sh_ant_req) \ - (!!(LUT_PTA_WLAN_ACTIVE_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, \ - bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \ - wifi_sh_ant_req)))) -#define LUT_SET_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ - wifi_prio, wifi_txrx, wifi_sh_ant_req) \ - LUT_PTA_WLAN_ACTIVE_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, \ - bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \ - wifi_sh_ant_req)) -#define LUT_CLEAR_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \ - wifi_req, wifi_prio, wifi_txrx, \ - wifi_sh_ant_req) \ - LUT_PTA_WLAN_ACTIVE_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, \ - bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \ - wifi_sh_ant_req)) - -#define LUT_WLAN_KILL_OP(lut, op, val) \ - lut[(val) >> 4] op (cpu_to_le32(BIT(((val) << 1) & 0x1e))) -#define LUT_TEST_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ - wifi_prio, wifi_txrx, wifi_sh_ant_req) \ - (!!(LUT_WLAN_KILL_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ - wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)))) -#define LUT_SET_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ - wifi_prio, wifi_txrx, wifi_sh_ant_req) \ - LUT_WLAN_KILL_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ - wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)) -#define LUT_CLEAR_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ - wifi_prio, wifi_txrx, wifi_sh_ant_req) \ - LUT_WLAN_KILL_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ - wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)) - -#define LUT_ANT_SWITCH_OP(lut, op, val) \ - lut[(val) >> 4] op (cpu_to_le32(BIT((((val) << 1) & 0x1e) + 1))) -#define LUT_TEST_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ - wifi_prio, wifi_txrx, wifi_sh_ant_req) \ - (!!(LUT_ANT_SWITCH_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ - wifi_req, wifi_prio, wifi_txrx, \ - wifi_sh_ant_req)))) -#define LUT_SET_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ - wifi_prio, wifi_txrx, wifi_sh_ant_req) \ - LUT_ANT_SWITCH_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ - wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)) -#define LUT_CLEAR_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ - wifi_prio, wifi_txrx, wifi_sh_ant_req) \ - LUT_ANT_SWITCH_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ - wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)) - -static const __le32 iwlagn_def_3w_lookup[12] = { - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaeaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xcc00ff28), - cpu_to_le32(0x0000aaaa), - cpu_to_le32(0xcc00aaaa), - cpu_to_le32(0x0000aaaa), - cpu_to_le32(0xc0004000), - cpu_to_le32(0x00004000), - cpu_to_le32(0xf0005000), - cpu_to_le32(0xf0004000), -}; - -static const __le32 iwlagn_concurrent_lookup[12] = { - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0x00000000), - cpu_to_le32(0x00000000), - cpu_to_le32(0x00000000), - cpu_to_le32(0x00000000), -}; - -void iwlagn_send_advance_bt_config(struct iwl_priv *priv) -{ - struct iwlagn_bt_cmd bt_cmd = { - .max_kill = IWLAGN_BT_MAX_KILL_DEFAULT, - .bt3_timer_t7_value = IWLAGN_BT3_T7_DEFAULT, - .bt3_prio_sample_time = IWLAGN_BT3_PRIO_SAMPLE_DEFAULT, - .bt3_timer_t2_value = IWLAGN_BT3_T2_DEFAULT, - }; - - BUILD_BUG_ON(sizeof(iwlagn_def_3w_lookup) != - sizeof(bt_cmd.bt3_lookup_table)); - - if (priv->cfg->bt_params) - bt_cmd.prio_boost = priv->cfg->bt_params->bt_prio_boost; - else - bt_cmd.prio_boost = 0; - bt_cmd.kill_ack_mask = priv->kill_ack_mask; - bt_cmd.kill_cts_mask = priv->kill_cts_mask; - bt_cmd.valid = priv->bt_valid; - bt_cmd.tx_prio_boost = 0; - bt_cmd.rx_prio_boost = 0; - - /* - * Configure BT coex mode to "no coexistence" when the - * user disabled BT coexistence, we have no interface - * (might be in monitor mode), or the interface is in - * IBSS mode (no proper uCode support for coex then). - */ - if (!bt_coex_active || priv->iw_mode == NL80211_IFTYPE_ADHOC) { - bt_cmd.flags = 0; - } else { - bt_cmd.flags = IWLAGN_BT_FLAG_COEX_MODE_3W << - IWLAGN_BT_FLAG_COEX_MODE_SHIFT; - if (priv->cfg->bt_params && - priv->cfg->bt_params->bt_sco_disable) - bt_cmd.flags |= IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE; - - if (priv->bt_ch_announce) - bt_cmd.flags |= IWLAGN_BT_FLAG_CHANNEL_INHIBITION; - IWL_DEBUG_INFO(priv, "BT coex flag: 0X%x\n", bt_cmd.flags); - } - if (priv->bt_full_concurrent) - memcpy(bt_cmd.bt3_lookup_table, iwlagn_concurrent_lookup, - sizeof(iwlagn_concurrent_lookup)); - else - memcpy(bt_cmd.bt3_lookup_table, iwlagn_def_3w_lookup, - sizeof(iwlagn_def_3w_lookup)); - - IWL_DEBUG_INFO(priv, "BT coex %s in %s mode\n", - bt_cmd.flags ? "active" : "disabled", - priv->bt_full_concurrent ? - "full concurrency" : "3-wire"); - - if (iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, sizeof(bt_cmd), &bt_cmd)) - IWL_ERR(priv, "failed to send BT Coex Config\n"); - - /* - * When we are doing a restart, need to also reconfigure BT - * SCO to the device. If not doing a restart, bt_sco_active - * will always be false, so there's no need to have an extra - * variable to check for it. - */ - if (priv->bt_sco_active) { - struct iwlagn_bt_sco_cmd sco_cmd = { .flags = 0 }; - - if (priv->bt_sco_active) - sco_cmd.flags |= IWLAGN_BT_SCO_ACTIVE; - if (iwl_send_cmd_pdu(priv, REPLY_BT_COEX_SCO, - sizeof(sco_cmd), &sco_cmd)) - IWL_ERR(priv, "failed to send BT SCO command\n"); - } -} - -static void iwlagn_bt_traffic_change_work(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, bt_traffic_change_work); - struct iwl_rxon_context *ctx; - int smps_request = -1; - - /* - * Note: bt_traffic_load can be overridden by scan complete and - * coex profile notifications. Ignore that since only bad consequence - * can be not matching debug print with actual state. - */ - IWL_DEBUG_INFO(priv, "BT traffic load changes: %d\n", - priv->bt_traffic_load); - - switch (priv->bt_traffic_load) { - case IWL_BT_COEX_TRAFFIC_LOAD_NONE: - if (priv->bt_status) - smps_request = IEEE80211_SMPS_DYNAMIC; - else - smps_request = IEEE80211_SMPS_AUTOMATIC; - break; - case IWL_BT_COEX_TRAFFIC_LOAD_LOW: - smps_request = IEEE80211_SMPS_DYNAMIC; - break; - case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: - case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: - smps_request = IEEE80211_SMPS_STATIC; - break; - default: - IWL_ERR(priv, "Invalid BT traffic load: %d\n", - priv->bt_traffic_load); - break; - } - - mutex_lock(&priv->mutex); - - /* - * We can not send command to firmware while scanning. When the scan - * complete we will schedule this work again. We do check with mutex - * locked to prevent new scan request to arrive. We do not check - * STATUS_SCANNING to avoid race when queue_work two times from - * different notifications, but quit and not perform any work at all. - */ - if (test_bit(STATUS_SCAN_HW, &priv->status)) - goto out; - - if (priv->cfg->ops->lib->update_chain_flags) - priv->cfg->ops->lib->update_chain_flags(priv); - - if (smps_request != -1) { - for_each_context(priv, ctx) { - if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION) - ieee80211_request_smps(ctx->vif, smps_request); - } - } -out: - mutex_unlock(&priv->mutex); -} - -static void iwlagn_print_uartmsg(struct iwl_priv *priv, - struct iwl_bt_uart_msg *uart_msg) -{ - IWL_DEBUG_NOTIF(priv, "Message Type = 0x%X, SSN = 0x%X, " - "Update Req = 0x%X", - (BT_UART_MSG_FRAME1MSGTYPE_MSK & uart_msg->frame1) >> - BT_UART_MSG_FRAME1MSGTYPE_POS, - (BT_UART_MSG_FRAME1SSN_MSK & uart_msg->frame1) >> - BT_UART_MSG_FRAME1SSN_POS, - (BT_UART_MSG_FRAME1UPDATEREQ_MSK & uart_msg->frame1) >> - BT_UART_MSG_FRAME1UPDATEREQ_POS); - - IWL_DEBUG_NOTIF(priv, "Open connections = 0x%X, Traffic load = 0x%X, " - "Chl_SeqN = 0x%X, In band = 0x%X", - (BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK & uart_msg->frame2) >> - BT_UART_MSG_FRAME2OPENCONNECTIONS_POS, - (BT_UART_MSG_FRAME2TRAFFICLOAD_MSK & uart_msg->frame2) >> - BT_UART_MSG_FRAME2TRAFFICLOAD_POS, - (BT_UART_MSG_FRAME2CHLSEQN_MSK & uart_msg->frame2) >> - BT_UART_MSG_FRAME2CHLSEQN_POS, - (BT_UART_MSG_FRAME2INBAND_MSK & uart_msg->frame2) >> - BT_UART_MSG_FRAME2INBAND_POS); - - IWL_DEBUG_NOTIF(priv, "SCO/eSCO = 0x%X, Sniff = 0x%X, A2DP = 0x%X, " - "ACL = 0x%X, Master = 0x%X, OBEX = 0x%X", - (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) >> - BT_UART_MSG_FRAME3SCOESCO_POS, - (BT_UART_MSG_FRAME3SNIFF_MSK & uart_msg->frame3) >> - BT_UART_MSG_FRAME3SNIFF_POS, - (BT_UART_MSG_FRAME3A2DP_MSK & uart_msg->frame3) >> - BT_UART_MSG_FRAME3A2DP_POS, - (BT_UART_MSG_FRAME3ACL_MSK & uart_msg->frame3) >> - BT_UART_MSG_FRAME3ACL_POS, - (BT_UART_MSG_FRAME3MASTER_MSK & uart_msg->frame3) >> - BT_UART_MSG_FRAME3MASTER_POS, - (BT_UART_MSG_FRAME3OBEX_MSK & uart_msg->frame3) >> - BT_UART_MSG_FRAME3OBEX_POS); - - IWL_DEBUG_NOTIF(priv, "Idle duration = 0x%X", - (BT_UART_MSG_FRAME4IDLEDURATION_MSK & uart_msg->frame4) >> - BT_UART_MSG_FRAME4IDLEDURATION_POS); - - IWL_DEBUG_NOTIF(priv, "Tx Activity = 0x%X, Rx Activity = 0x%X, " - "eSCO Retransmissions = 0x%X", - (BT_UART_MSG_FRAME5TXACTIVITY_MSK & uart_msg->frame5) >> - BT_UART_MSG_FRAME5TXACTIVITY_POS, - (BT_UART_MSG_FRAME5RXACTIVITY_MSK & uart_msg->frame5) >> - BT_UART_MSG_FRAME5RXACTIVITY_POS, - (BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK & uart_msg->frame5) >> - BT_UART_MSG_FRAME5ESCORETRANSMIT_POS); - - IWL_DEBUG_NOTIF(priv, "Sniff Interval = 0x%X, Discoverable = 0x%X", - (BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK & uart_msg->frame6) >> - BT_UART_MSG_FRAME6SNIFFINTERVAL_POS, - (BT_UART_MSG_FRAME6DISCOVERABLE_MSK & uart_msg->frame6) >> - BT_UART_MSG_FRAME6DISCOVERABLE_POS); - - IWL_DEBUG_NOTIF(priv, "Sniff Activity = 0x%X, Inquiry/Page SR Mode = " - "0x%X, Connectable = 0x%X", - (BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK & uart_msg->frame7) >> - BT_UART_MSG_FRAME7SNIFFACTIVITY_POS, - (BT_UART_MSG_FRAME7INQUIRYPAGESRMODE_MSK & uart_msg->frame7) >> - BT_UART_MSG_FRAME7INQUIRYPAGESRMODE_POS, - (BT_UART_MSG_FRAME7CONNECTABLE_MSK & uart_msg->frame7) >> - BT_UART_MSG_FRAME7CONNECTABLE_POS); -} - -static void iwlagn_set_kill_ack_msk(struct iwl_priv *priv, - struct iwl_bt_uart_msg *uart_msg) -{ - u8 kill_ack_msk; - static const __le32 bt_kill_ack_msg[2] = { - cpu_to_le32(0xFFFFFFF), cpu_to_le32(0xFFFFFC00) }; - - kill_ack_msk = (((BT_UART_MSG_FRAME3A2DP_MSK | - BT_UART_MSG_FRAME3SNIFF_MSK | - BT_UART_MSG_FRAME3SCOESCO_MSK) & - uart_msg->frame3) == 0) ? 1 : 0; - if (priv->kill_ack_mask != bt_kill_ack_msg[kill_ack_msk]) { - priv->bt_valid |= IWLAGN_BT_VALID_KILL_ACK_MASK; - priv->kill_ack_mask = bt_kill_ack_msg[kill_ack_msk]; - /* schedule to send runtime bt_config */ - queue_work(priv->workqueue, &priv->bt_runtime_config); - } - -} - -void iwlagn_bt_coex_profile_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - unsigned long flags; - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_bt_coex_profile_notif *coex = &pkt->u.bt_coex_profile_notif; - struct iwlagn_bt_sco_cmd sco_cmd = { .flags = 0 }; - struct iwl_bt_uart_msg *uart_msg = &coex->last_bt_uart_msg; - - IWL_DEBUG_NOTIF(priv, "BT Coex notification:\n"); - IWL_DEBUG_NOTIF(priv, " status: %d\n", coex->bt_status); - IWL_DEBUG_NOTIF(priv, " traffic load: %d\n", coex->bt_traffic_load); - IWL_DEBUG_NOTIF(priv, " CI compliance: %d\n", - coex->bt_ci_compliance); - iwlagn_print_uartmsg(priv, uart_msg); - - priv->last_bt_traffic_load = priv->bt_traffic_load; - if (priv->iw_mode != NL80211_IFTYPE_ADHOC) { - if (priv->bt_status != coex->bt_status || - priv->last_bt_traffic_load != coex->bt_traffic_load) { - if (coex->bt_status) { - /* BT on */ - if (!priv->bt_ch_announce) - priv->bt_traffic_load = - IWL_BT_COEX_TRAFFIC_LOAD_HIGH; - else - priv->bt_traffic_load = - coex->bt_traffic_load; - } else { - /* BT off */ - priv->bt_traffic_load = - IWL_BT_COEX_TRAFFIC_LOAD_NONE; - } - priv->bt_status = coex->bt_status; - queue_work(priv->workqueue, - &priv->bt_traffic_change_work); - } - if (priv->bt_sco_active != - (uart_msg->frame3 & BT_UART_MSG_FRAME3SCOESCO_MSK)) { - priv->bt_sco_active = uart_msg->frame3 & - BT_UART_MSG_FRAME3SCOESCO_MSK; - if (priv->bt_sco_active) - sco_cmd.flags |= IWLAGN_BT_SCO_ACTIVE; - iwl_send_cmd_pdu_async(priv, REPLY_BT_COEX_SCO, - sizeof(sco_cmd), &sco_cmd, NULL); - } - } - - iwlagn_set_kill_ack_msk(priv, uart_msg); - - /* FIXME: based on notification, adjust the prio_boost */ - - spin_lock_irqsave(&priv->lock, flags); - priv->bt_ci_compliance = coex->bt_ci_compliance; - spin_unlock_irqrestore(&priv->lock, flags); -} - -void iwlagn_bt_rx_handler_setup(struct iwl_priv *priv) -{ - iwlagn_rx_handler_setup(priv); - priv->rx_handlers[REPLY_BT_COEX_PROFILE_NOTIF] = - iwlagn_bt_coex_profile_notif; -} - -void iwlagn_bt_setup_deferred_work(struct iwl_priv *priv) -{ - iwlagn_setup_deferred_work(priv); - - INIT_WORK(&priv->bt_traffic_change_work, - iwlagn_bt_traffic_change_work); -} - -void iwlagn_bt_cancel_deferred_work(struct iwl_priv *priv) -{ - cancel_work_sync(&priv->bt_traffic_change_work); -} - -static bool is_single_rx_stream(struct iwl_priv *priv) -{ - return priv->current_ht_config.smps == IEEE80211_SMPS_STATIC || - priv->current_ht_config.single_chain_sufficient; -} - -#define IWL_NUM_RX_CHAINS_MULTIPLE 3 -#define IWL_NUM_RX_CHAINS_SINGLE 2 -#define IWL_NUM_IDLE_CHAINS_DUAL 2 -#define IWL_NUM_IDLE_CHAINS_SINGLE 1 - -/* - * Determine how many receiver/antenna chains to use. - * - * More provides better reception via diversity. Fewer saves power - * at the expense of throughput, but only when not in powersave to - * start with. - * - * MIMO (dual stream) requires at least 2, but works better with 3. - * This does not determine *which* chains to use, just how many. - */ -static int iwl_get_active_rx_chain_count(struct iwl_priv *priv) -{ - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist && - (priv->bt_full_concurrent || - priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) { - /* - * only use chain 'A' in bt high traffic load or - * full concurrency mode - */ - return IWL_NUM_RX_CHAINS_SINGLE; - } - /* # of Rx chains to use when expecting MIMO. */ - if (is_single_rx_stream(priv)) - return IWL_NUM_RX_CHAINS_SINGLE; - else - return IWL_NUM_RX_CHAINS_MULTIPLE; -} - -/* - * When we are in power saving mode, unless device support spatial - * multiplexing power save, use the active count for rx chain count. - */ -static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) -{ - /* # Rx chains when idling, depending on SMPS mode */ - switch (priv->current_ht_config.smps) { - case IEEE80211_SMPS_STATIC: - case IEEE80211_SMPS_DYNAMIC: - return IWL_NUM_IDLE_CHAINS_SINGLE; - case IEEE80211_SMPS_OFF: - return active_cnt; - default: - WARN(1, "invalid SMPS mode %d", - priv->current_ht_config.smps); - return active_cnt; - } -} - -/* up to 4 chains */ -static u8 iwl_count_chain_bitmap(u32 chain_bitmap) -{ - u8 res; - res = (chain_bitmap & BIT(0)) >> 0; - res += (chain_bitmap & BIT(1)) >> 1; - res += (chain_bitmap & BIT(2)) >> 2; - res += (chain_bitmap & BIT(3)) >> 3; - return res; -} - -/** - * iwlagn_set_rxon_chain - Set up Rx chain usage in "staging" RXON image - * - * Selects how many and which Rx receivers/antennas/chains to use. - * This should not be used for scan command ... it puts data in wrong place. - */ -void iwlagn_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx) -{ - bool is_single = is_single_rx_stream(priv); - bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); - u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; - u32 active_chains; - u16 rx_chain; - - /* Tell uCode which antennas are actually connected. - * Before first association, we assume all antennas are connected. - * Just after first association, iwl_chain_noise_calibration() - * checks which antennas actually *are* connected. */ - if (priv->chain_noise_data.active_chains) - active_chains = priv->chain_noise_data.active_chains; - else - active_chains = priv->hw_params.valid_rx_ant; - - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist && - (priv->bt_full_concurrent || - priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) { - /* - * only use chain 'A' in bt high traffic load or - * full concurrency mode - */ - active_chains = first_antenna(active_chains); - } - - rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS; - - /* How many receivers should we use? */ - active_rx_cnt = iwl_get_active_rx_chain_count(priv); - idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt); - - - /* correct rx chain count according hw settings - * and chain noise calibration - */ - valid_rx_cnt = iwl_count_chain_bitmap(active_chains); - if (valid_rx_cnt < active_rx_cnt) - active_rx_cnt = valid_rx_cnt; - - if (valid_rx_cnt < idle_rx_cnt) - idle_rx_cnt = valid_rx_cnt; - - rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; - rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; - - ctx->staging.rx_chain = cpu_to_le16(rx_chain); - - if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam) - ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; - else - ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; - - IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n", - ctx->staging.rx_chain, - active_rx_cnt, idle_rx_cnt); - - WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || - active_rx_cnt < idle_rx_cnt); -} - -u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant, u8 valid) -{ - int i; - u8 ind = ant; - - if (priv->band == IEEE80211_BAND_2GHZ && - priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) - return 0; - - for (i = 0; i < RATE_ANT_NUM - 1; i++) { - ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0; - if (valid & BIT(ind)) - return ind; - } - return ant; -} - -static const char *get_csr_string(int cmd) -{ - switch (cmd) { - IWL_CMD(CSR_HW_IF_CONFIG_REG); - IWL_CMD(CSR_INT_COALESCING); - IWL_CMD(CSR_INT); - IWL_CMD(CSR_INT_MASK); - IWL_CMD(CSR_FH_INT_STATUS); - IWL_CMD(CSR_GPIO_IN); - IWL_CMD(CSR_RESET); - IWL_CMD(CSR_GP_CNTRL); - IWL_CMD(CSR_HW_REV); - IWL_CMD(CSR_EEPROM_REG); - IWL_CMD(CSR_EEPROM_GP); - IWL_CMD(CSR_OTP_GP_REG); - IWL_CMD(CSR_GIO_REG); - IWL_CMD(CSR_GP_UCODE_REG); - IWL_CMD(CSR_GP_DRIVER_REG); - IWL_CMD(CSR_UCODE_DRV_GP1); - IWL_CMD(CSR_UCODE_DRV_GP2); - IWL_CMD(CSR_LED_REG); - IWL_CMD(CSR_DRAM_INT_TBL_REG); - IWL_CMD(CSR_GIO_CHICKEN_BITS); - IWL_CMD(CSR_ANA_PLL_CFG); - IWL_CMD(CSR_HW_REV_WA_REG); - IWL_CMD(CSR_DBG_HPET_MEM_REG); - default: - return "UNKNOWN"; - } -} - -void iwl_dump_csr(struct iwl_priv *priv) -{ - int i; - static const u32 csr_tbl[] = { - CSR_HW_IF_CONFIG_REG, - CSR_INT_COALESCING, - CSR_INT, - CSR_INT_MASK, - CSR_FH_INT_STATUS, - CSR_GPIO_IN, - CSR_RESET, - CSR_GP_CNTRL, - CSR_HW_REV, - CSR_EEPROM_REG, - CSR_EEPROM_GP, - CSR_OTP_GP_REG, - CSR_GIO_REG, - CSR_GP_UCODE_REG, - CSR_GP_DRIVER_REG, - CSR_UCODE_DRV_GP1, - CSR_UCODE_DRV_GP2, - CSR_LED_REG, - CSR_DRAM_INT_TBL_REG, - CSR_GIO_CHICKEN_BITS, - CSR_ANA_PLL_CFG, - CSR_HW_REV_WA_REG, - CSR_DBG_HPET_MEM_REG - }; - IWL_ERR(priv, "CSR values:\n"); - IWL_ERR(priv, "(2nd byte of CSR_INT_COALESCING is " - "CSR_INT_PERIODIC_REG)\n"); - for (i = 0; i < ARRAY_SIZE(csr_tbl); i++) { - IWL_ERR(priv, " %25s: 0X%08x\n", - get_csr_string(csr_tbl[i]), - iwl_read32(priv, csr_tbl[i])); - } -} - -static const char *get_fh_string(int cmd) -{ - switch (cmd) { - IWL_CMD(FH_RSCSR_CHNL0_STTS_WPTR_REG); - IWL_CMD(FH_RSCSR_CHNL0_RBDCB_BASE_REG); - IWL_CMD(FH_RSCSR_CHNL0_WPTR); - IWL_CMD(FH_MEM_RCSR_CHNL0_CONFIG_REG); - IWL_CMD(FH_MEM_RSSR_SHARED_CTRL_REG); - IWL_CMD(FH_MEM_RSSR_RX_STATUS_REG); - IWL_CMD(FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV); - IWL_CMD(FH_TSSR_TX_STATUS_REG); - IWL_CMD(FH_TSSR_TX_ERROR_REG); - default: - return "UNKNOWN"; - } -} - -int iwl_dump_fh(struct iwl_priv *priv, char **buf, bool display) -{ - int i; -#ifdef CONFIG_IWLWIFI_DEBUG - int pos = 0; - size_t bufsz = 0; -#endif - static const u32 fh_tbl[] = { - FH_RSCSR_CHNL0_STTS_WPTR_REG, - FH_RSCSR_CHNL0_RBDCB_BASE_REG, - FH_RSCSR_CHNL0_WPTR, - FH_MEM_RCSR_CHNL0_CONFIG_REG, - FH_MEM_RSSR_SHARED_CTRL_REG, - FH_MEM_RSSR_RX_STATUS_REG, - FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV, - FH_TSSR_TX_STATUS_REG, - FH_TSSR_TX_ERROR_REG - }; -#ifdef CONFIG_IWLWIFI_DEBUG - if (display) { - bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; - *buf = kmalloc(bufsz, GFP_KERNEL); - if (!*buf) - return -ENOMEM; - pos += scnprintf(*buf + pos, bufsz - pos, - "FH register values:\n"); - for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { - pos += scnprintf(*buf + pos, bufsz - pos, - " %34s: 0X%08x\n", - get_fh_string(fh_tbl[i]), - iwl_read_direct32(priv, fh_tbl[i])); - } - return pos; - } -#endif - IWL_ERR(priv, "FH register values:\n"); - for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { - IWL_ERR(priv, " %34s: 0X%08x\n", - get_fh_string(fh_tbl[i]), - iwl_read_direct32(priv, fh_tbl[i])); - } - return 0; -} |