diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-3945.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-3945.c | 2547 |
1 files changed, 0 insertions, 2547 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c deleted file mode 100644 index 45cfa1cf194..00000000000 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ /dev/null @@ -1,2547 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/dma-mapping.h> -#include <linux/delay.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/wireless.h> -#include <linux/firmware.h> -#include <linux/etherdevice.h> -#include <asm/unaligned.h> -#include <net/mac80211.h> - -#include "iwl-3945-core.h" -#include "iwl-3945.h" -#include "iwl-helpers.h" -#include "iwl-3945-rs.h" - -#define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \ - [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ - IWL_RATE_##r##M_IEEE, \ - IWL_RATE_##ip##M_INDEX, \ - IWL_RATE_##in##M_INDEX, \ - IWL_RATE_##rp##M_INDEX, \ - IWL_RATE_##rn##M_INDEX, \ - IWL_RATE_##pp##M_INDEX, \ - IWL_RATE_##np##M_INDEX, \ - IWL_RATE_##r##M_INDEX_TABLE, \ - IWL_RATE_##ip##M_INDEX_TABLE } - -/* - * Parameter order: - * rate, prev rate, next rate, prev tgg rate, next tgg rate - * - * If there isn't a valid next or previous rate then INV is used which - * maps to IWL_RATE_INVALID - * - */ -const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT] = { - IWL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */ - IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */ - IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */ - IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */ - IWL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */ - IWL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */ - IWL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */ - IWL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */ - IWL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */ - IWL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */ - IWL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */ - IWL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */ -}; - -/* 1 = enable the iwl3945_disable_events() function */ -#define IWL_EVT_DISABLE (0) -#define IWL_EVT_DISABLE_SIZE (1532/32) - -/** - * iwl3945_disable_events - Disable selected events in uCode event log - * - * Disable an event by writing "1"s into "disable" - * bitmap in SRAM. Bit position corresponds to Event # (id/type). - * Default values of 0 enable uCode events to be logged. - * Use for only special debugging. This function is just a placeholder as-is, - * you'll need to provide the special bits! ... - * ... and set IWL_EVT_DISABLE to 1. */ -void iwl3945_disable_events(struct iwl3945_priv *priv) -{ - int ret; - int i; - u32 base; /* SRAM address of event log header */ - u32 disable_ptr; /* SRAM address of event-disable bitmap array */ - u32 array_size; /* # of u32 entries in array */ - u32 evt_disable[IWL_EVT_DISABLE_SIZE] = { - 0x00000000, /* 31 - 0 Event id numbers */ - 0x00000000, /* 63 - 32 */ - 0x00000000, /* 95 - 64 */ - 0x00000000, /* 127 - 96 */ - 0x00000000, /* 159 - 128 */ - 0x00000000, /* 191 - 160 */ - 0x00000000, /* 223 - 192 */ - 0x00000000, /* 255 - 224 */ - 0x00000000, /* 287 - 256 */ - 0x00000000, /* 319 - 288 */ - 0x00000000, /* 351 - 320 */ - 0x00000000, /* 383 - 352 */ - 0x00000000, /* 415 - 384 */ - 0x00000000, /* 447 - 416 */ - 0x00000000, /* 479 - 448 */ - 0x00000000, /* 511 - 480 */ - 0x00000000, /* 543 - 512 */ - 0x00000000, /* 575 - 544 */ - 0x00000000, /* 607 - 576 */ - 0x00000000, /* 639 - 608 */ - 0x00000000, /* 671 - 640 */ - 0x00000000, /* 703 - 672 */ - 0x00000000, /* 735 - 704 */ - 0x00000000, /* 767 - 736 */ - 0x00000000, /* 799 - 768 */ - 0x00000000, /* 831 - 800 */ - 0x00000000, /* 863 - 832 */ - 0x00000000, /* 895 - 864 */ - 0x00000000, /* 927 - 896 */ - 0x00000000, /* 959 - 928 */ - 0x00000000, /* 991 - 960 */ - 0x00000000, /* 1023 - 992 */ - 0x00000000, /* 1055 - 1024 */ - 0x00000000, /* 1087 - 1056 */ - 0x00000000, /* 1119 - 1088 */ - 0x00000000, /* 1151 - 1120 */ - 0x00000000, /* 1183 - 1152 */ - 0x00000000, /* 1215 - 1184 */ - 0x00000000, /* 1247 - 1216 */ - 0x00000000, /* 1279 - 1248 */ - 0x00000000, /* 1311 - 1280 */ - 0x00000000, /* 1343 - 1312 */ - 0x00000000, /* 1375 - 1344 */ - 0x00000000, /* 1407 - 1376 */ - 0x00000000, /* 1439 - 1408 */ - 0x00000000, /* 1471 - 1440 */ - 0x00000000, /* 1503 - 1472 */ - }; - - base = le32_to_cpu(priv->card_alive.log_event_table_ptr); - if (!iwl3945_hw_valid_rtc_data_addr(base)) { - IWL_ERROR("Invalid event log pointer 0x%08X\n", base); - return; - } - - ret = iwl3945_grab_nic_access(priv); - if (ret) { - IWL_WARNING("Can not read from adapter at this time.\n"); - return; - } - - disable_ptr = iwl3945_read_targ_mem(priv, base + (4 * sizeof(u32))); - array_size = iwl3945_read_targ_mem(priv, base + (5 * sizeof(u32))); - iwl3945_release_nic_access(priv); - - if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) { - IWL_DEBUG_INFO("Disabling selected uCode log events at 0x%x\n", - disable_ptr); - ret = iwl3945_grab_nic_access(priv); - for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++) - iwl3945_write_targ_mem(priv, - disable_ptr + (i * sizeof(u32)), - evt_disable[i]); - - iwl3945_release_nic_access(priv); - } else { - IWL_DEBUG_INFO("Selected uCode log events may be disabled\n"); - IWL_DEBUG_INFO(" by writing \"1\"s into disable bitmap\n"); - IWL_DEBUG_INFO(" in SRAM at 0x%x, size %d u32s\n", - disable_ptr, array_size); - } - -} - -static int iwl3945_hwrate_to_plcp_idx(u8 plcp) -{ - int idx; - - for (idx = 0; idx < IWL_RATE_COUNT; idx++) - if (iwl3945_rates[idx].plcp == plcp) - return idx; - return -1; -} - -/** - * iwl3945_get_antenna_flags - Get antenna flags for RXON command - * @priv: eeprom and antenna fields are used to determine antenna flags - * - * priv->eeprom is used to determine if antenna AUX/MAIN are reversed - * priv->antenna specifies the antenna diversity mode: - * - * IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself - * IWL_ANTENNA_MAIN - Force MAIN antenna - * IWL_ANTENNA_AUX - Force AUX antenna - */ -__le32 iwl3945_get_antenna_flags(const struct iwl3945_priv *priv) -{ - switch (priv->antenna) { - case IWL_ANTENNA_DIVERSITY: - return 0; - - case IWL_ANTENNA_MAIN: - if (priv->eeprom.antenna_switch_type) - return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK; - return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK; - - case IWL_ANTENNA_AUX: - if (priv->eeprom.antenna_switch_type) - return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK; - return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK; - } - - /* bad antenna selector value */ - IWL_ERROR("Bad antenna selector value (0x%x)\n", priv->antenna); - return 0; /* "diversity" is default if error */ -} - -#ifdef CONFIG_IWL3945_DEBUG -#define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x - -static const char *iwl3945_get_tx_fail_reason(u32 status) -{ - switch (status & TX_STATUS_MSK) { - case TX_STATUS_SUCCESS: - return "SUCCESS"; - TX_STATUS_ENTRY(SHORT_LIMIT); - TX_STATUS_ENTRY(LONG_LIMIT); - TX_STATUS_ENTRY(FIFO_UNDERRUN); - TX_STATUS_ENTRY(MGMNT_ABORT); - TX_STATUS_ENTRY(NEXT_FRAG); - TX_STATUS_ENTRY(LIFE_EXPIRE); - TX_STATUS_ENTRY(DEST_PS); - TX_STATUS_ENTRY(ABORTED); - TX_STATUS_ENTRY(BT_RETRY); - TX_STATUS_ENTRY(STA_INVALID); - TX_STATUS_ENTRY(FRAG_DROPPED); - TX_STATUS_ENTRY(TID_DISABLE); - TX_STATUS_ENTRY(FRAME_FLUSHED); - TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL); - TX_STATUS_ENTRY(TX_LOCKED); - TX_STATUS_ENTRY(NO_BEACON_ON_RADAR); - } - - return "UNKNOWN"; -} -#else -static inline const char *iwl3945_get_tx_fail_reason(u32 status) -{ - return ""; -} -#endif - -/* - * get ieee prev rate from rate scale table. - * for A and B mode we need to overright prev - * value - */ -int iwl3945_rs_next_rate(struct iwl3945_priv *priv, int rate) -{ - int next_rate = iwl3945_get_prev_ieee_rate(rate); - - switch (priv->band) { - case IEEE80211_BAND_5GHZ: - if (rate == IWL_RATE_12M_INDEX) - next_rate = IWL_RATE_9M_INDEX; - else if (rate == IWL_RATE_6M_INDEX) - next_rate = IWL_RATE_6M_INDEX; - break; - case IEEE80211_BAND_2GHZ: - if (!(priv->sta_supp_rates & IWL_OFDM_RATES_MASK) && - iwl3945_is_associated(priv)) { - if (rate == IWL_RATE_11M_INDEX) - next_rate = IWL_RATE_5M_INDEX; - } - break; - - default: - break; - } - - return next_rate; -} - - -/** - * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd - * - * When FW advances 'R' index, all entries between old and new 'R' index - * need to be reclaimed. As result, some free space forms. If there is - * enough free space (> low mark), wake the stack that feeds us. - */ -static void iwl3945_tx_queue_reclaim(struct iwl3945_priv *priv, - int txq_id, int index) -{ - struct iwl3945_tx_queue *txq = &priv->txq[txq_id]; - struct iwl3945_queue *q = &txq->q; - struct iwl3945_tx_info *tx_info; - - BUG_ON(txq_id == IWL_CMD_QUEUE_NUM); - - for (index = iwl_queue_inc_wrap(index, q->n_bd); q->read_ptr != index; - q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) { - - tx_info = &txq->txb[txq->q.read_ptr]; - ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb[0]); - tx_info->skb[0] = NULL; - iwl3945_hw_txq_free_tfd(priv, txq); - } - - if (iwl3945_queue_space(q) > q->low_mark && (txq_id >= 0) && - (txq_id != IWL_CMD_QUEUE_NUM) && - priv->mac80211_registered) - ieee80211_wake_queue(priv->hw, txq_id); -} - -/** - * iwl3945_rx_reply_tx - Handle Tx response - */ -static void iwl3945_rx_reply_tx(struct iwl3945_priv *priv, - struct iwl3945_rx_mem_buffer *rxb) -{ - struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data; - u16 sequence = le16_to_cpu(pkt->hdr.sequence); - int txq_id = SEQ_TO_QUEUE(sequence); - int index = SEQ_TO_INDEX(sequence); - struct iwl3945_tx_queue *txq = &priv->txq[txq_id]; - struct ieee80211_tx_info *info; - struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; - u32 status = le32_to_cpu(tx_resp->status); - int rate_idx; - int fail; - - if ((index >= txq->q.n_bd) || (iwl3945_x2_queue_used(&txq->q, index) == 0)) { - IWL_ERROR("Read index for DMA queue txq_id (%d) index %d " - "is out of range [0-%d] %d %d\n", txq_id, - index, txq->q.n_bd, txq->q.write_ptr, - txq->q.read_ptr); - return; - } - - info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb[0]); - ieee80211_tx_info_clear_status(info); - - /* Fill the MRR chain with some info about on-chip retransmissions */ - rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate); - if (info->band == IEEE80211_BAND_5GHZ) - rate_idx -= IWL_FIRST_OFDM_RATE; - - fail = tx_resp->failure_frame; - - info->status.rates[0].idx = rate_idx; - info->status.rates[0].count = fail + 1; /* add final attempt */ - - /* tx_status->rts_retry_count = tx_resp->failure_rts; */ - info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ? - IEEE80211_TX_STAT_ACK : 0; - - IWL_DEBUG_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n", - txq_id, iwl3945_get_tx_fail_reason(status), status, - tx_resp->rate, tx_resp->failure_frame); - - IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index); - iwl3945_tx_queue_reclaim(priv, txq_id, index); - - if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK)) - IWL_ERROR("TODO: Implement Tx ABORT REQUIRED!!!\n"); -} - - - -/***************************************************************************** - * - * Intel PRO/Wireless 3945ABG/BG Network Connection - * - * RX handler implementations - * - *****************************************************************************/ - -void iwl3945_hw_rx_statistics(struct iwl3945_priv *priv, struct iwl3945_rx_mem_buffer *rxb) -{ - struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data; - IWL_DEBUG_RX("Statistics notification received (%d vs %d).\n", - (int)sizeof(struct iwl3945_notif_statistics), - le32_to_cpu(pkt->len)); - - memcpy(&priv->statistics, pkt->u.raw, sizeof(priv->statistics)); - - iwl3945_led_background(priv); - - priv->last_statistics_time = jiffies; -} - -/****************************************************************************** - * - * Misc. internal state and helper functions - * - ******************************************************************************/ -#ifdef CONFIG_IWL3945_DEBUG - -/** - * iwl3945_report_frame - dump frame to syslog during debug sessions - * - * You may hack this function to show different aspects of received frames, - * including selective frame dumps. - * group100 parameter selects whether to show 1 out of 100 good frames. - */ -static void iwl3945_dbg_report_frame(struct iwl3945_priv *priv, - struct iwl3945_rx_packet *pkt, - struct ieee80211_hdr *header, int group100) -{ - u32 to_us; - u32 print_summary = 0; - u32 print_dump = 0; /* set to 1 to dump all frames' contents */ - u32 hundred = 0; - u32 dataframe = 0; - __le16 fc; - u16 seq_ctl; - u16 channel; - u16 phy_flags; - u16 length; - u16 status; - u16 bcn_tmr; - u32 tsf_low; - u64 tsf; - u8 rssi; - u8 agc; - u16 sig_avg; - u16 noise_diff; - struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt); - struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); - struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt); - u8 *data = IWL_RX_DATA(pkt); - - /* MAC header */ - fc = header->frame_control; - seq_ctl = le16_to_cpu(header->seq_ctrl); - - /* metadata */ - channel = le16_to_cpu(rx_hdr->channel); - phy_flags = le16_to_cpu(rx_hdr->phy_flags); - length = le16_to_cpu(rx_hdr->len); - - /* end-of-frame status and timestamp */ - status = le32_to_cpu(rx_end->status); - bcn_tmr = le32_to_cpu(rx_end->beacon_timestamp); - tsf_low = le64_to_cpu(rx_end->timestamp) & 0x0ffffffff; - tsf = le64_to_cpu(rx_end->timestamp); - - /* signal statistics */ - rssi = rx_stats->rssi; - agc = rx_stats->agc; - sig_avg = le16_to_cpu(rx_stats->sig_avg); - noise_diff = le16_to_cpu(rx_stats->noise_diff); - - to_us = !compare_ether_addr(header->addr1, priv->mac_addr); - - /* if data frame is to us and all is good, - * (optionally) print summary for only 1 out of every 100 */ - if (to_us && (fc & ~cpu_to_le16(IEEE80211_FCTL_PROTECTED)) == - cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) { - dataframe = 1; - if (!group100) - print_summary = 1; /* print each frame */ - else if (priv->framecnt_to_us < 100) { - priv->framecnt_to_us++; - print_summary = 0; - } else { - priv->framecnt_to_us = 0; - print_summary = 1; - hundred = 1; - } - } else { - /* print summary for all other frames */ - print_summary = 1; - } - - if (print_summary) { - char *title; - int rate; - - if (hundred) - title = "100Frames"; - else if (ieee80211_has_retry(fc)) - title = "Retry"; - else if (ieee80211_is_assoc_resp(fc)) - title = "AscRsp"; - else if (ieee80211_is_reassoc_resp(fc)) - title = "RasRsp"; - else if (ieee80211_is_probe_resp(fc)) { - title = "PrbRsp"; - print_dump = 1; /* dump frame contents */ - } else if (ieee80211_is_beacon(fc)) { - title = "Beacon"; - print_dump = 1; /* dump frame contents */ - } else if (ieee80211_is_atim(fc)) - title = "ATIM"; - else if (ieee80211_is_auth(fc)) - title = "Auth"; - else if (ieee80211_is_deauth(fc)) - title = "DeAuth"; - else if (ieee80211_is_disassoc(fc)) - title = "DisAssoc"; - else - title = "Frame"; - - rate = iwl3945_hwrate_to_plcp_idx(rx_hdr->rate); - if (rate == -1) - rate = 0; - else - rate = iwl3945_rates[rate].ieee / 2; - - /* print frame summary. - * MAC addresses show just the last byte (for brevity), - * but you can hack it to show more, if you'd like to. */ - if (dataframe) - IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, " - "len=%u, rssi=%d, chnl=%d, rate=%d, \n", - title, le16_to_cpu(fc), header->addr1[5], - length, rssi, channel, rate); - else { - /* src/dst addresses assume managed mode */ - IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, " - "src=0x%02x, rssi=%u, tim=%lu usec, " - "phy=0x%02x, chnl=%d\n", - title, le16_to_cpu(fc), header->addr1[5], - header->addr3[5], rssi, - tsf_low - priv->scan_start_tsf, - phy_flags, channel); - } - } - if (print_dump) - iwl3945_print_hex_dump(IWL_DL_RX, data, length); -} -#else -static inline void iwl3945_dbg_report_frame(struct iwl3945_priv *priv, - struct iwl3945_rx_packet *pkt, - struct ieee80211_hdr *header, int group100) -{ -} -#endif - -/* This is necessary only for a number of statistics, see the caller. */ -static int iwl3945_is_network_packet(struct iwl3945_priv *priv, - struct ieee80211_hdr *header) -{ - /* Filter incoming packets to determine if they are targeted toward - * this network, discarding packets coming from ourselves */ - switch (priv->iw_mode) { - case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */ - /* packets to our IBSS update information */ - return !compare_ether_addr(header->addr3, priv->bssid); - case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */ - /* packets to our IBSS update information */ - return !compare_ether_addr(header->addr2, priv->bssid); - default: - return 1; - } -} - -static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv, - struct iwl3945_rx_mem_buffer *rxb, - struct ieee80211_rx_status *stats) -{ - struct iwl3945_rx_packet *pkt = (struct iwl3945_rx_packet *)rxb->skb->data; -#ifdef CONFIG_IWL3945_LEDS - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt); -#endif - struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); - struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt); - short len = le16_to_cpu(rx_hdr->len); - - /* We received data from the HW, so stop the watchdog */ - if (unlikely((len + IWL_RX_FRAME_SIZE) > skb_tailroom(rxb->skb))) { - IWL_DEBUG_DROP("Corruption detected!\n"); - return; - } - - /* We only process data packets if the interface is open */ - if (unlikely(!priv->is_open)) { - IWL_DEBUG_DROP_LIMIT - ("Dropping packet while interface is not open.\n"); - return; - } - - skb_reserve(rxb->skb, (void *)rx_hdr->payload - (void *)pkt); - /* Set the size of the skb to the size of the frame */ - skb_put(rxb->skb, le16_to_cpu(rx_hdr->len)); - - if (iwl3945_param_hwcrypto) - iwl3945_set_decrypted_flag(priv, rxb->skb, - le32_to_cpu(rx_end->status), stats); - -#ifdef CONFIG_IWL3945_LEDS - if (ieee80211_is_data(hdr->frame_control)) - priv->rxtxpackets += len; -#endif - ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats); - rxb->skb = NULL; -} - -#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) - -static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, - struct iwl3945_rx_mem_buffer *rxb) -{ - struct ieee80211_hdr *header; - struct ieee80211_rx_status rx_status; - struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data; - struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt); - struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); - struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt); - int snr; - u16 rx_stats_sig_avg = le16_to_cpu(rx_stats->sig_avg); - u16 rx_stats_noise_diff = le16_to_cpu(rx_stats->noise_diff); - u8 network_packet; - - rx_status.flag = 0; - rx_status.mactime = le64_to_cpu(rx_end->timestamp); - rx_status.freq = - ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel)); - rx_status.band = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? - IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; - - rx_status.rate_idx = iwl3945_hwrate_to_plcp_idx(rx_hdr->rate); - if (rx_status.band == IEEE80211_BAND_5GHZ) - rx_status.rate_idx -= IWL_FIRST_OFDM_RATE; - - rx_status.antenna = le16_to_cpu(rx_hdr->phy_flags & - RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4; - - /* set the preamble flag if appropriate */ - if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) - rx_status.flag |= RX_FLAG_SHORTPRE; - - if ((unlikely(rx_stats->phy_count > 20))) { - IWL_DEBUG_DROP - ("dsp size out of range [0,20]: " - "%d/n", rx_stats->phy_count); - return; - } - - if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR) - || !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { - IWL_DEBUG_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status); - return; - } - - - - /* Convert 3945's rssi indicator to dBm */ - rx_status.signal = rx_stats->rssi - IWL_RSSI_OFFSET; - - /* Set default noise value to -127 */ - if (priv->last_rx_noise == 0) - priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE; - - /* 3945 provides noise info for OFDM frames only. - * sig_avg and noise_diff are measured by the 3945's digital signal - * processor (DSP), and indicate linear levels of signal level and - * distortion/noise within the packet preamble after - * automatic gain control (AGC). sig_avg should stay fairly - * constant if the radio's AGC is working well. - * Since these values are linear (not dB or dBm), linear - * signal-to-noise ratio (SNR) is (sig_avg / noise_diff). - * Convert linear SNR to dB SNR, then subtract that from rssi dBm - * to obtain noise level in dBm. - * Calculate rx_status.signal (quality indicator in %) based on SNR. */ - if (rx_stats_noise_diff) { - snr = rx_stats_sig_avg / rx_stats_noise_diff; - rx_status.noise = rx_status.signal - - iwl3945_calc_db_from_ratio(snr); - rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, - rx_status.noise); - - /* If noise info not available, calculate signal quality indicator (%) - * using just the dBm signal level. */ - } else { - rx_status.noise = priv->last_rx_noise; - rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0); - } - - - IWL_DEBUG_STATS("Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n", - rx_status.signal, rx_status.noise, rx_status.qual, - rx_stats_sig_avg, rx_stats_noise_diff); - - header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt); - - network_packet = iwl3945_is_network_packet(priv, header); - - IWL_DEBUG_STATS_LIMIT("[%c] %d RSSI:%d Signal:%u, Noise:%u, Rate:%u\n", - network_packet ? '*' : ' ', - le16_to_cpu(rx_hdr->channel), - rx_status.signal, rx_status.signal, - rx_status.noise, rx_status.rate_idx); - -#ifdef CONFIG_IWL3945_DEBUG - if (iwl3945_debug_level & (IWL_DL_RX)) - /* Set "1" to report good data frames in groups of 100 */ - iwl3945_dbg_report_frame(priv, pkt, header, 1); -#endif - - if (network_packet) { - priv->last_beacon_time = le32_to_cpu(rx_end->beacon_timestamp); - priv->last_tsf = le64_to_cpu(rx_end->timestamp); - priv->last_rx_rssi = rx_status.signal; - priv->last_rx_noise = rx_status.noise; - } - - iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status); -} - -int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl3945_priv *priv, void *ptr, - dma_addr_t addr, u16 len) -{ - int count; - u32 pad; - struct iwl3945_tfd_frame *tfd = (struct iwl3945_tfd_frame *)ptr; - - count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags)); - pad = TFD_CTL_PAD_GET(le32_to_cpu(tfd->control_flags)); - - if ((count >= NUM_TFD_CHUNKS) || (count < 0)) { - IWL_ERROR("Error can not send more than %d chunks\n", - NUM_TFD_CHUNKS); - return -EINVAL; - } - - tfd->pa[count].addr = cpu_to_le32(addr); - tfd->pa[count].len = cpu_to_le32(len); - - count++; - - tfd->control_flags = cpu_to_le32(TFD_CTL_COUNT_SET(count) | - TFD_CTL_PAD_SET(pad)); - - return 0; -} - -/** - * iwl3945_hw_txq_free_tfd - Free one TFD, those at index [txq->q.read_ptr] - * - * Does NOT advance any indexes - */ -int iwl3945_hw_txq_free_tfd(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq) -{ - struct iwl3945_tfd_frame *bd_tmp = (struct iwl3945_tfd_frame *)&txq->bd[0]; - struct iwl3945_tfd_frame *bd = &bd_tmp[txq->q.read_ptr]; - struct pci_dev *dev = priv->pci_dev; - int i; - int counter; - - /* classify bd */ - if (txq->q.id == IWL_CMD_QUEUE_NUM) - /* nothing to cleanup after for host commands */ - return 0; - - /* sanity check */ - counter = TFD_CTL_COUNT_GET(le32_to_cpu(bd->control_flags)); - if (counter > NUM_TFD_CHUNKS) { - IWL_ERROR("Too many chunks: %i\n", counter); - /* @todo issue fatal error, it is quite serious situation */ - return 0; - } - - /* unmap chunks if any */ - - for (i = 1; i < counter; i++) { - pci_unmap_single(dev, le32_to_cpu(bd->pa[i].addr), - le32_to_cpu(bd->pa[i].len), PCI_DMA_TODEVICE); - if (txq->txb[txq->q.read_ptr].skb[0]) { - struct sk_buff *skb = txq->txb[txq->q.read_ptr].skb[0]; - if (txq->txb[txq->q.read_ptr].skb[0]) { - /* Can be called from interrupt context */ - dev_kfree_skb_any(skb); - txq->txb[txq->q.read_ptr].skb[0] = NULL; - } - } - } - return 0; -} - -u8 iwl3945_hw_find_station(struct iwl3945_priv *priv, const u8 *addr) -{ - int i, start = IWL_AP_ID; - int ret = IWL_INVALID_STATION; - unsigned long flags; - - if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) || - (priv->iw_mode == NL80211_IFTYPE_AP)) - start = IWL_STA_ID; - - if (is_broadcast_ether_addr(addr)) - return priv->hw_setting.bcast_sta_id; - - spin_lock_irqsave(&priv->sta_lock, flags); - for (i = start; i < priv->hw_setting.max_stations; i++) - if ((priv->stations[i].used) && - (!compare_ether_addr - (priv->stations[i].sta.sta.addr, addr))) { - ret = i; - goto out; - } - - IWL_DEBUG_INFO("can not find STA %pM (total %d)\n", - addr, priv->num_stations); - out: - spin_unlock_irqrestore(&priv->sta_lock, flags); - return ret; -} - -/** - * iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD: - * -*/ -void iwl3945_hw_build_tx_cmd_rate(struct iwl3945_priv *priv, - struct iwl3945_cmd *cmd, - struct ieee80211_tx_info *info, - struct ieee80211_hdr *hdr, int sta_id, int tx_id) -{ - unsigned long flags; - u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value; - u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT - 1); - u16 rate_mask; - int rate; - u8 rts_retry_limit; - u8 data_retry_limit; - __le32 tx_flags; - __le16 fc = hdr->frame_control; - - rate = iwl3945_rates[rate_index].plcp; - tx_flags = cmd->cmd.tx.tx_flags; - - /* We need to figure out how to get the sta->supp_rates while - * in this running context */ - rate_mask = IWL_RATES_MASK; - - spin_lock_irqsave(&priv->sta_lock, flags); - - priv->stations[sta_id].current_rate.rate_n_flags = rate; - - if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) && - (sta_id != priv->hw_setting.bcast_sta_id) && - (sta_id != IWL_MULTICAST_ID)) - priv->stations[IWL_STA_ID].current_rate.rate_n_flags = rate; - - spin_unlock_irqrestore(&priv->sta_lock, flags); - - if (tx_id >= IWL_CMD_QUEUE_NUM) - rts_retry_limit = 3; - else - rts_retry_limit = 7; - - if (ieee80211_is_probe_resp(fc)) { - data_retry_limit = 3; - if (data_retry_limit < rts_retry_limit) - rts_retry_limit = data_retry_limit; - } else - data_retry_limit = IWL_DEFAULT_TX_RETRY; - - if (priv->data_retry_limit != -1) - data_retry_limit = priv->data_retry_limit; - - if (ieee80211_is_mgmt(fc)) { - switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) { - case cpu_to_le16(IEEE80211_STYPE_AUTH): - case cpu_to_le16(IEEE80211_STYPE_DEAUTH): - case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ): - case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ): - if (tx_flags & TX_CMD_FLG_RTS_MSK) { - tx_flags &= ~TX_CMD_FLG_RTS_MSK; - tx_flags |= TX_CMD_FLG_CTS_MSK; - } - break; - default: - break; - } - } - - cmd->cmd.tx.rts_retry_limit = rts_retry_limit; - cmd->cmd.tx.data_retry_limit = data_retry_limit; - cmd->cmd.tx.rate = rate; - cmd->cmd.tx.tx_flags = tx_flags; - - /* OFDM */ - cmd->cmd.tx.supp_rates[0] = - ((rate_mask & IWL_OFDM_RATES_MASK) >> IWL_FIRST_OFDM_RATE) & 0xFF; - - /* CCK */ - cmd->cmd.tx.supp_rates[1] = (rate_mask & 0xF); - - IWL_DEBUG_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X " - "cck/ofdm mask: 0x%x/0x%x\n", sta_id, - cmd->cmd.tx.rate, le32_to_cpu(cmd->cmd.tx.tx_flags), - cmd->cmd.tx.supp_rates[1], cmd->cmd.tx.supp_rates[0]); -} - -u8 iwl3945_sync_sta(struct iwl3945_priv *priv, int sta_id, u16 tx_rate, u8 flags) -{ - unsigned long flags_spin; - struct iwl3945_station_entry *station; - - if (sta_id == IWL_INVALID_STATION) - return IWL_INVALID_STATION; - - spin_lock_irqsave(&priv->sta_lock, flags_spin); - station = &priv->stations[sta_id]; - - station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK; - station->sta.rate_n_flags = cpu_to_le16(tx_rate); - station->current_rate.rate_n_flags = tx_rate; - station->sta.mode = STA_CONTROL_MODIFY_MSK; - - spin_unlock_irqrestore(&priv->sta_lock, flags_spin); - - iwl3945_send_add_station(priv, &station->sta, flags); - IWL_DEBUG_RATE("SCALE sync station %d to rate %d\n", - sta_id, tx_rate); - return sta_id; -} - -static int iwl3945_nic_set_pwr_src(struct iwl3945_priv *priv, int pwr_max) -{ - int rc; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - rc = iwl3945_grab_nic_access(priv); - if (rc) { - spin_unlock_irqrestore(&priv->lock, flags); - return rc; - } - - if (!pwr_max) { - u32 val; - - rc = pci_read_config_dword(priv->pci_dev, - PCI_POWER_SOURCE, &val); - if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) { - iwl3945_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VAUX, - ~APMG_PS_CTRL_MSK_PWR_SRC); - iwl3945_release_nic_access(priv); - - iwl3945_poll_bit(priv, CSR_GPIO_IN, - CSR_GPIO_IN_VAL_VAUX_PWR_SRC, - CSR_GPIO_IN_BIT_AUX_POWER, 5000); - } else - iwl3945_release_nic_access(priv); - } else { - iwl3945_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, - ~APMG_PS_CTRL_MSK_PWR_SRC); - - iwl3945_release_nic_access(priv); - iwl3945_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC, - CSR_GPIO_IN_BIT_AUX_POWER, 5000); /* uS */ - } - spin_unlock_irqrestore(&priv->lock, flags); - - return rc; -} - -static int iwl3945_rx_init(struct iwl3945_priv *priv, struct iwl3945_rx_queue *rxq) -{ - int rc; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - rc = iwl3945_grab_nic_access(priv); - if (rc) { - spin_unlock_irqrestore(&priv->lock, flags); - return rc; - } - - iwl3945_write_direct32(priv, FH_RCSR_RBD_BASE(0), rxq->dma_addr); - iwl3945_write_direct32(priv, FH_RCSR_RPTR_ADDR(0), - priv->hw_setting.shared_phys + - offsetof(struct iwl3945_shared, rx_read_ptr[0])); - iwl3945_write_direct32(priv, FH_RCSR_WPTR(0), 0); - iwl3945_write_direct32(priv, FH_RCSR_CONFIG(0), - ALM_FH_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE | - ALM_FH_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE | - ALM_FH_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN | - ALM_FH_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 | - (RX_QUEUE_SIZE_LOG << ALM_FH_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) | - ALM_FH_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST | - (1 << ALM_FH_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) | - ALM_FH_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH); - - /* fake read to flush all prev I/O */ - iwl3945_read_direct32(priv, FH_RSSR_CTRL); - - iwl3945_release_nic_access(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -static int iwl3945_tx_reset(struct iwl3945_priv *priv) -{ - int rc; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - rc = iwl3945_grab_nic_access(priv); - if (rc) { - spin_unlock_irqrestore(&priv->lock, flags); - return rc; - } - - /* bypass mode */ - iwl3945_write_prph(priv, ALM_SCD_MODE_REG, 0x2); - - /* RA 0 is active */ - iwl3945_write_prph(priv, ALM_SCD_ARASTAT_REG, 0x01); - - /* all 6 fifo are active */ - iwl3945_write_prph(priv, ALM_SCD_TXFACT_REG, 0x3f); - - iwl3945_write_prph(priv, ALM_SCD_SBYP_MODE_1_REG, 0x010000); - iwl3945_write_prph(priv, ALM_SCD_SBYP_MODE_2_REG, 0x030002); - iwl3945_write_prph(priv, ALM_SCD_TXF4MF_REG, 0x000004); - iwl3945_write_prph(priv, ALM_SCD_TXF5MF_REG, 0x000005); - - iwl3945_write_direct32(priv, FH_TSSR_CBB_BASE, - priv->hw_setting.shared_phys); - - iwl3945_write_direct32(priv, FH_TSSR_MSG_CONFIG, - ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON | - ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON | - ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B | - ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON | - ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON | - ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH | - ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH); - - iwl3945_release_nic_access(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -/** - * iwl3945_txq_ctx_reset - Reset TX queue context - * - * Destroys all DMA structures and initialize them again - */ -static int iwl3945_txq_ctx_reset(struct iwl3945_priv *priv) -{ - int rc; - int txq_id, slots_num; - - iwl3945_hw_txq_ctx_free(priv); - - /* Tx CMD queue */ - rc = iwl3945_tx_reset(priv); - if (rc) - goto error; - - /* Tx queue(s) */ - for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++) { - slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ? - TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS; - rc = iwl3945_tx_queue_init(priv, &priv->txq[txq_id], slots_num, - txq_id); - if (rc) { - IWL_ERROR("Tx %d queue init failed\n", txq_id); - goto error; - } - } - - return rc; - - error: - iwl3945_hw_txq_ctx_free(priv); - return rc; -} - -int iwl3945_hw_nic_init(struct iwl3945_priv *priv) -{ - u8 rev_id; - int rc; - unsigned long flags; - struct iwl3945_rx_queue *rxq = &priv->rxq; - - iwl3945_power_init_handle(priv); - - spin_lock_irqsave(&priv->lock, flags); - iwl3945_set_bit(priv, CSR_ANA_PLL_CFG, CSR39_ANA_PLL_CFG_VAL); - iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS, - CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); - - iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - rc = iwl3945_poll_direct_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); - if (rc < 0) { - spin_unlock_irqrestore(&priv->lock, flags); - IWL_DEBUG_INFO("Failed to init the card\n"); - return rc; - } - - rc = iwl3945_grab_nic_access(priv); - if (rc) { - spin_unlock_irqrestore(&priv->lock, flags); - return rc; - } - iwl3945_write_prph(priv, APMG_CLK_EN_REG, - APMG_CLK_VAL_DMA_CLK_RQT | - APMG_CLK_VAL_BSM_CLK_RQT); - udelay(20); - iwl3945_set_bits_prph(priv, APMG_PCIDEV_STT_REG, - APMG_PCIDEV_STT_VAL_L1_ACT_DIS); - iwl3945_release_nic_access(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - /* Determine HW type */ - rc = pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id); - if (rc) - return rc; - IWL_DEBUG_INFO("HW Revision ID = 0x%X\n", rev_id); - - iwl3945_nic_set_pwr_src(priv, 1); - spin_lock_irqsave(&priv->lock, flags); - - if (rev_id & PCI_CFG_REV_ID_BIT_RTP) - IWL_DEBUG_INFO("RTP type \n"); - else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) { - IWL_DEBUG_INFO("3945 RADIO-MB type\n"); - iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BIT_3945_MB); - } else { - IWL_DEBUG_INFO("3945 RADIO-MM type\n"); - iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BIT_3945_MM); - } - - if (EEPROM_SKU_CAP_OP_MODE_MRC == priv->eeprom.sku_cap) { - IWL_DEBUG_INFO("SKU OP mode is mrc\n"); - iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC); - } else - IWL_DEBUG_INFO("SKU OP mode is basic\n"); - - if ((priv->eeprom.board_revision & 0xF0) == 0xD0) { - IWL_DEBUG_INFO("3945ABG revision is 0x%X\n", - priv->eeprom.board_revision); - iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); - } else { - IWL_DEBUG_INFO("3945ABG revision is 0x%X\n", - priv->eeprom.board_revision); - iwl3945_clear_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); - } - - if (priv->eeprom.almgor_m_version <= 1) { - iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A); - IWL_DEBUG_INFO("Card M type A version is 0x%X\n", - priv->eeprom.almgor_m_version); - } else { - IWL_DEBUG_INFO("Card M type B version is 0x%X\n", - priv->eeprom.almgor_m_version); - iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B); - } - spin_unlock_irqrestore(&priv->lock, flags); - - if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE) - IWL_DEBUG_RF_KILL("SW RF KILL supported in EEPROM.\n"); - - if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE) - IWL_DEBUG_RF_KILL("HW RF KILL supported in EEPROM.\n"); - - /* Allocate the RX queue, or reset if it is already allocated */ - if (!rxq->bd) { - rc = iwl3945_rx_queue_alloc(priv); - if (rc) { - IWL_ERROR("Unable to initialize Rx queue\n"); - return -ENOMEM; - } - } else - iwl3945_rx_queue_reset(priv, rxq); - - iwl3945_rx_replenish(priv); - - iwl3945_rx_init(priv, rxq); - - spin_lock_irqsave(&priv->lock, flags); - - /* Look at using this instead: - rxq->need_update = 1; - iwl3945_rx_queue_update_write_ptr(priv, rxq); - */ - - rc = iwl3945_grab_nic_access(priv); - if (rc) { - spin_unlock_irqrestore(&priv->lock, flags); - return rc; - } - iwl3945_write_direct32(priv, FH_RCSR_WPTR(0), rxq->write & ~7); - iwl3945_release_nic_access(priv); - - spin_unlock_irqrestore(&priv->lock, flags); - - rc = iwl3945_txq_ctx_reset(priv); - if (rc) - return rc; - - set_bit(STATUS_INIT, &priv->status); - - return 0; -} - -/** - * iwl3945_hw_txq_ctx_free - Free TXQ Context - * - * Destroy all TX DMA queues and structures - */ -void iwl3945_hw_txq_ctx_free(struct iwl3945_priv *priv) -{ - int txq_id; - - /* Tx queues */ - for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++) - iwl3945_tx_queue_free(priv, &priv->txq[txq_id]); -} - -void iwl3945_hw_txq_ctx_stop(struct iwl3945_priv *priv) -{ - int queue; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - if (iwl3945_grab_nic_access(priv)) { - spin_unlock_irqrestore(&priv->lock, flags); - iwl3945_hw_txq_ctx_free(priv); - return; - } - - /* stop SCD */ - iwl3945_write_prph(priv, ALM_SCD_MODE_REG, 0); - - /* reset TFD queues */ - for (queue = TFD_QUEUE_MIN; queue < TFD_QUEUE_MAX; queue++) { - iwl3945_write_direct32(priv, FH_TCSR_CONFIG(queue), 0x0); - iwl3945_poll_direct_bit(priv, FH_TSSR_TX_STATUS, - ALM_FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(queue), - 1000); - } - - iwl3945_release_nic_access(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - iwl3945_hw_txq_ctx_free(priv); -} - -int iwl3945_hw_nic_stop_master(struct iwl3945_priv *priv) -{ - int rc = 0; - u32 reg_val; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - - /* set stop master bit */ - iwl3945_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER); - - reg_val = iwl3945_read32(priv, CSR_GP_CNTRL); - - if (CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE == - (reg_val & CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE)) - IWL_DEBUG_INFO("Card in power save, master is already " - "stopped\n"); - else { - rc = iwl3945_poll_direct_bit(priv, CSR_RESET, - CSR_RESET_REG_FLAG_MASTER_DISABLED, 100); - if (rc < 0) { - spin_unlock_irqrestore(&priv->lock, flags); - return rc; - } - } - - spin_unlock_irqrestore(&priv->lock, flags); - IWL_DEBUG_INFO("stop master\n"); - - return rc; -} - -int iwl3945_hw_nic_reset(struct iwl3945_priv *priv) -{ - int rc; - unsigned long flags; - - iwl3945_hw_nic_stop_master(priv); - - spin_lock_irqsave(&priv->lock, flags); - - iwl3945_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); - - iwl3945_poll_direct_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); - - rc = iwl3945_grab_nic_access(priv); - if (!rc) { - iwl3945_write_prph(priv, APMG_CLK_CTRL_REG, - APMG_CLK_VAL_BSM_CLK_RQT); - - udelay(10); - - iwl3945_set_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - - iwl3945_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0); - iwl3945_write_prph(priv, APMG_RTC_INT_STT_REG, - 0xFFFFFFFF); - - /* enable DMA */ - iwl3945_write_prph(priv, APMG_CLK_EN_REG, - APMG_CLK_VAL_DMA_CLK_RQT | - APMG_CLK_VAL_BSM_CLK_RQT); - udelay(10); - - iwl3945_set_bits_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_RESET_REQ); - udelay(5); - iwl3945_clear_bits_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_RESET_REQ); - iwl3945_release_nic_access(priv); - } - - /* Clear the 'host command active' bit... */ - clear_bit(STATUS_HCMD_ACTIVE, &priv->status); - - wake_up_interruptible(&priv->wait_command_queue); - spin_unlock_irqrestore(&priv->lock, flags); - - return rc; -} - -/** - * iwl3945_hw_reg_adjust_power_by_temp - * return index delta into power gain settings table -*/ -static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading) -{ - return (new_reading - old_reading) * (-11) / 100; -} - -/** - * iwl3945_hw_reg_temp_out_of_range - Keep temperature in sane range - */ -static inline int iwl3945_hw_reg_temp_out_of_range(int temperature) -{ - return ((temperature < -260) || (temperature > 25)) ? 1 : 0; -} - -int iwl3945_hw_get_temperature(struct iwl3945_priv *priv) -{ - return iwl3945_read32(priv, CSR_UCODE_DRV_GP2); -} - -/** - * iwl3945_hw_reg_txpower_get_temperature - * get the current temperature by reading from NIC -*/ -static int iwl3945_hw_reg_txpower_get_temperature(struct iwl3945_priv *priv) -{ - int temperature; - - temperature = iwl3945_hw_get_temperature(priv); - - /* driver's okay range is -260 to +25. - * human readable okay range is 0 to +285 */ - IWL_DEBUG_INFO("Temperature: %d\n", temperature + IWL_TEMP_CONVERT); - - /* handle insane temp reading */ - if (iwl3945_hw_reg_temp_out_of_range(temperature)) { - IWL_ERROR("Error bad temperature value %d\n", temperature); - - /* if really really hot(?), - * substitute the 3rd band/group's temp measured at factory */ - if (priv->last_temperature > 100) - temperature = priv->eeprom.groups[2].temperature; - else /* else use most recent "sane" value from driver */ - temperature = priv->last_temperature; - } - - return temperature; /* raw, not "human readable" */ -} - -/* Adjust Txpower only if temperature variance is greater than threshold. - * - * Both are lower than older versions' 9 degrees */ -#define IWL_TEMPERATURE_LIMIT_TIMER 6 - -/** - * is_temp_calib_needed - determines if new calibration is needed - * - * records new temperature in tx_mgr->temperature. - * replaces tx_mgr->last_temperature *only* if calib needed - * (assumes caller will actually do the calibration!). */ -static int is_temp_calib_needed(struct iwl3945_priv *priv) -{ - int temp_diff; - - priv->temperature = iwl3945_hw_reg_txpower_get_temperature(priv); - temp_diff = priv->temperature - priv->last_temperature; - - /* get absolute value */ - if (temp_diff < 0) { - IWL_DEBUG_POWER("Getting cooler, delta %d,\n", temp_diff); - temp_diff = -temp_diff; - } else if (temp_diff == 0) - IWL_DEBUG_POWER("Same temp,\n"); - else - IWL_DEBUG_POWER("Getting warmer, delta %d,\n", temp_diff); - - /* if we don't need calibration, *don't* update last_temperature */ - if (temp_diff < IWL_TEMPERATURE_LIMIT_TIMER) { - IWL_DEBUG_POWER("Timed thermal calib not needed\n"); - return 0; - } - - IWL_DEBUG_POWER("Timed thermal calib needed\n"); - - /* assume that caller will actually do calib ... - * update the "last temperature" value */ - priv->last_temperature = priv->temperature; - return 1; -} - -#define IWL_MAX_GAIN_ENTRIES 78 -#define IWL_CCK_FROM_OFDM_POWER_DIFF -5 -#define IWL_CCK_FROM_OFDM_INDEX_DIFF (10) - -/* radio and DSP power table, each step is 1/2 dB. - * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */ -static struct iwl3945_tx_power power_gain_table[2][IWL_MAX_GAIN_ENTRIES] = { - { - {251, 127}, /* 2.4 GHz, highest power */ - {251, 127}, - {251, 127}, - {251, 127}, - {251, 125}, - {251, 110}, - {251, 105}, - {251, 98}, - {187, 125}, - {187, 115}, - {187, 108}, - {187, 99}, - {243, 119}, - {243, 111}, - {243, 105}, - {243, 97}, - {243, 92}, - {211, 106}, - {211, 100}, - {179, 120}, - {179, 113}, - {179, 107}, - {147, 125}, - {147, 119}, - {147, 112}, - {147, 106}, - {147, 101}, - {147, 97}, - {147, 91}, - {115, 107}, - {235, 121}, - {235, 115}, - {235, 109}, - {203, 127}, - {203, 121}, - {203, 115}, - {203, 108}, - {203, 102}, - {203, 96}, - {203, 92}, - {171, 110}, - {171, 104}, - {171, 98}, - {139, 116}, - {227, 125}, - {227, 119}, - {227, 113}, - {227, 107}, - {227, 101}, - {227, 96}, - {195, 113}, - {195, 106}, - {195, 102}, - {195, 95}, - {163, 113}, - {163, 106}, - {163, 102}, - {163, 95}, - {131, 113}, - {131, 106}, - {131, 102}, - {131, 95}, - {99, 113}, - {99, 106}, - {99, 102}, - {99, 95}, - {67, 113}, - {67, 106}, - {67, 102}, - {67, 95}, - {35, 113}, - {35, 106}, - {35, 102}, - {35, 95}, - {3, 113}, - {3, 106}, - {3, 102}, - {3, 95} }, /* 2.4 GHz, lowest power */ - { - {251, 127}, /* 5.x GHz, highest power */ - {251, 120}, - {251, 114}, - {219, 119}, - {219, 101}, - {187, 113}, - {187, 102}, - {155, 114}, - {155, 103}, - {123, 117}, - {123, 107}, - {123, 99}, - {123, 92}, - {91, 108}, - {59, 125}, - {59, 118}, - {59, 109}, - {59, 102}, - {59, 96}, - {59, 90}, - {27, 104}, - {27, 98}, - {27, 92}, - {115, 118}, - {115, 111}, - {115, 104}, - {83, 126}, - {83, 121}, - {83, 113}, - {83, 105}, - {83, 99}, - {51, 118}, - {51, 111}, - {51, 104}, - {51, 98}, - {19, 116}, - {19, 109}, - {19, 102}, - {19, 98}, - {19, 93}, - {171, 113}, - {171, 107}, - {171, 99}, - {139, 120}, - {139, 113}, - {139, 107}, - {139, 99}, - {107, 120}, - {107, 113}, - {107, 107}, - {107, 99}, - {75, 120}, - {75, 113}, - {75, 107}, - {75, 99}, - {43, 120}, - {43, 113}, - {43, 107}, - {43, 99}, - {11, 120}, - {11, 113}, - {11, 107}, - {11, 99}, - {131, 107}, - {131, 99}, - {99, 120}, - {99, 113}, - {99, 107}, - {99, 99}, - {67, 120}, - {67, 113}, - {67, 107}, - {67, 99}, - {35, 120}, - {35, 113}, - {35, 107}, - {35, 99}, - {3, 120} } /* 5.x GHz, lowest power */ -}; - -static inline u8 iwl3945_hw_reg_fix_power_index(int index) -{ - if (index < 0) - return 0; - if (index >= IWL_MAX_GAIN_ENTRIES) - return IWL_MAX_GAIN_ENTRIES - 1; - return (u8) index; -} - -/* Kick off thermal recalibration check every 60 seconds */ -#define REG_RECALIB_PERIOD (60) - -/** - * iwl3945_hw_reg_set_scan_power - Set Tx power for scan probe requests - * - * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK) - * or 6 Mbit (OFDM) rates. - */ -static void iwl3945_hw_reg_set_scan_power(struct iwl3945_priv *priv, u32 scan_tbl_index, - s32 rate_index, const s8 *clip_pwrs, - struct iwl3945_channel_info *ch_info, - int band_index) -{ - struct iwl3945_scan_power_info *scan_power_info; - s8 power; - u8 power_index; - - scan_power_info = &ch_info->scan_pwr_info[scan_tbl_index]; - - /* use this channel group's 6Mbit clipping/saturation pwr, - * but cap at regulatory scan power restriction (set during init - * based on eeprom channel data) for this channel. */ - power = min(ch_info->scan_power, clip_pwrs[IWL_RATE_6M_INDEX_TABLE]); - - /* further limit to user's max power preference. - * FIXME: Other spectrum management power limitations do not - * seem to apply?? */ - power = min(power, priv->user_txpower_limit); - scan_power_info->requested_power = power; - - /* find difference between new scan *power* and current "normal" - * Tx *power* for 6Mb. Use this difference (x2) to adjust the - * current "normal" temperature-compensated Tx power *index* for - * this rate (1Mb or 6Mb) to yield new temp-compensated scan power - * *index*. */ - power_index = ch_info->power_info[rate_index].power_table_index - - (power - ch_info->power_info - [IWL_RATE_6M_INDEX_TABLE].requested_power) * 2; - - /* store reference index that we use when adjusting *all* scan - * powers. So we can accommodate user (all channel) or spectrum - * management (single channel) power changes "between" temperature - * feedback compensation procedures. - * don't force fit this reference index into gain table; it may be a - * negative number. This will help avoid errors when we're at - * the lower bounds (highest gains, for warmest temperatures) - * of the table. */ - - /* don't exceed table bounds for "real" setting */ - power_index = iwl3945_hw_reg_fix_power_index(power_index); - - scan_power_info->power_table_index = power_index; - scan_power_info->tpc.tx_gain = - power_gain_table[band_index][power_index].tx_gain; - scan_power_info->tpc.dsp_atten = - power_gain_table[band_index][power_index].dsp_atten; -} - -/** - * iwl3945_hw_reg_send_txpower - fill in Tx Power command with gain settings - * - * Configures power settings for all rates for the current channel, - * using values from channel info struct, and send to NIC - */ -int iwl3945_hw_reg_send_txpower(struct iwl3945_priv *priv) -{ - int rate_idx, i; - const struct iwl3945_channel_info *ch_info = NULL; - struct iwl3945_txpowertable_cmd txpower = { - .channel = priv->active_rxon.channel, - }; - - txpower.band = (priv->band == IEEE80211_BAND_5GHZ) ? 0 : 1; - ch_info = iwl3945_get_channel_info(priv, - priv->band, - le16_to_cpu(priv->active_rxon.channel)); - if (!ch_info) { - IWL_ERROR - ("Failed to get channel info for channel %d [%d]\n", - le16_to_cpu(priv->active_rxon.channel), priv->band); - return -EINVAL; - } - - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_POWER("Not calling TX_PWR_TABLE_CMD on " - "non-Tx channel.\n"); - return 0; - } - - /* fill cmd with power settings for all rates for current channel */ - /* Fill OFDM rate */ - for (rate_idx = IWL_FIRST_OFDM_RATE, i = 0; - rate_idx <= IWL_LAST_OFDM_RATE; rate_idx++, i++) { - - txpower.power[i].tpc = ch_info->power_info[i].tpc; - txpower.power[i].rate = iwl3945_rates[rate_idx].plcp; - - IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n", - le16_to_cpu(txpower.channel), - txpower.band, - txpower.power[i].tpc.tx_gain, - txpower.power[i].tpc.dsp_atten, - txpower.power[i].rate); - } - /* Fill CCK rates */ - for (rate_idx = IWL_FIRST_CCK_RATE; - rate_idx <= IWL_LAST_CCK_RATE; rate_idx++, i++) { - txpower.power[i].tpc = ch_info->power_info[i].tpc; - txpower.power[i].rate = iwl3945_rates[rate_idx].plcp; - - IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n", - le16_to_cpu(txpower.channel), - txpower.band, - txpower.power[i].tpc.tx_gain, - txpower.power[i].tpc.dsp_atten, - txpower.power[i].rate); - } - - return iwl3945_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD, - sizeof(struct iwl3945_txpowertable_cmd), &txpower); - -} - -/** - * iwl3945_hw_reg_set_new_power - Configures power tables at new levels - * @ch_info: Channel to update. Uses power_info.requested_power. - * - * Replace requested_power and base_power_index ch_info fields for - * one channel. - * - * Called if user or spectrum management changes power preferences. - * Takes into account h/w and modulation limitations (clip power). - * - * This does *not* send anything to NIC, just sets up ch_info for one channel. - * - * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to - * properly fill out the scan powers, and actual h/w gain settings, - * and send changes to NIC - */ -static int iwl3945_hw_reg_set_new_power(struct iwl3945_priv *priv, - struct iwl3945_channel_info *ch_info) -{ - struct iwl3945_channel_power_info *power_info; - int power_changed = 0; - int i; - const s8 *clip_pwrs; - int power; - - /* Get this chnlgrp's rate-to-max/clip-powers table */ - clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers; - - /* Get this channel's rate-to-current-power settings table */ - power_info = ch_info->power_info; - - /* update OFDM Txpower settings */ - for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE; - i++, ++power_info) { - int delta_idx; - - /* limit new power to be no more than h/w capability */ - power = min(ch_info->curr_txpow, clip_pwrs[i]); - if (power == power_info->requested_power) - continue; - - /* find difference between old and new requested powers, - * update base (non-temp-compensated) power index */ - delta_idx = (power - power_info->requested_power) * 2; - power_info->base_power_index -= delta_idx; - - /* save new requested power value */ - power_info->requested_power = power; - - power_changed = 1; - } - - /* update CCK Txpower settings, based on OFDM 12M setting ... - * ... all CCK power settings for a given channel are the *same*. */ - if (power_changed) { - power = - ch_info->power_info[IWL_RATE_12M_INDEX_TABLE]. - requested_power + IWL_CCK_FROM_OFDM_POWER_DIFF; - - /* do all CCK rates' iwl3945_channel_power_info structures */ - for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++) { - power_info->requested_power = power; - power_info->base_power_index = - ch_info->power_info[IWL_RATE_12M_INDEX_TABLE]. - base_power_index + IWL_CCK_FROM_OFDM_INDEX_DIFF; - ++power_info; - } - } - - return 0; -} - -/** - * iwl3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel - * - * NOTE: Returned power limit may be less (but not more) than requested, - * based strictly on regulatory (eeprom and spectrum mgt) limitations - * (no consideration for h/w clipping limitations). - */ -static int iwl3945_hw_reg_get_ch_txpower_limit(struct iwl3945_channel_info *ch_info) -{ - s8 max_power; - -#if 0 - /* if we're using TGd limits, use lower of TGd or EEPROM */ - if (ch_info->tgd_data.max_power != 0) - max_power = min(ch_info->tgd_data.max_power, - ch_info->eeprom.max_power_avg); - - /* else just use EEPROM limits */ - else -#endif - max_power = ch_info->eeprom.max_power_avg; - - return min(max_power, ch_info->max_power_avg); -} - -/** - * iwl3945_hw_reg_comp_txpower_temp - Compensate for temperature - * - * Compensate txpower settings of *all* channels for temperature. - * This only accounts for the difference between current temperature - * and the factory calibration temperatures, and bases the new settings - * on the channel's base_power_index. - * - * If RxOn is "associated", this sends the new Txpower to NIC! - */ -static int iwl3945_hw_reg_comp_txpower_temp(struct iwl3945_priv *priv) -{ - struct iwl3945_channel_info *ch_info = NULL; - int delta_index; - const s8 *clip_pwrs; /* array of h/w max power levels for each rate */ - u8 a_band; - u8 rate_index; - u8 scan_tbl_index; - u8 i; - int ref_temp; - int temperature = priv->temperature; - - /* set up new Tx power info for each and every channel, 2.4 and 5.x */ - for (i = 0; i < priv->channel_count; i++) { - ch_info = &priv->channel_info[i]; - a_band = is_channel_a_band(ch_info); - - /* Get this chnlgrp's factory calibration temperature */ - ref_temp = (s16)priv->eeprom.groups[ch_info->group_index]. - temperature; - - /* get power index adjustment based on current and factory - * temps */ - delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature, - ref_temp); - - /* set tx power value for all rates, OFDM and CCK */ - for (rate_index = 0; rate_index < IWL_RATE_COUNT; - rate_index++) { - int power_idx = - ch_info->power_info[rate_index].base_power_index; - - /* temperature compensate */ - power_idx += delta_index; - - /* stay within table range */ - power_idx = iwl3945_hw_reg_fix_power_index(power_idx); - ch_info->power_info[rate_index]. - power_table_index = (u8) power_idx; - ch_info->power_info[rate_index].tpc = - power_gain_table[a_band][power_idx]; - } - - /* Get this chnlgrp's rate-to-max/clip-powers table */ - clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers; - - /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ - for (scan_tbl_index = 0; - scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) { - s32 actual_index = (scan_tbl_index == 0) ? - IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE; - iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index, - actual_index, clip_pwrs, - ch_info, a_band); - } - } - - /* send Txpower command for current channel to ucode */ - return iwl3945_hw_reg_send_txpower(priv); -} - -int iwl3945_hw_reg_set_txpower(struct iwl3945_priv *priv, s8 power) -{ - struct iwl3945_channel_info *ch_info; - s8 max_power; - u8 a_band; - u8 i; - - if (priv->user_txpower_limit == power) { - IWL_DEBUG_POWER("Requested Tx power same as current " - "limit: %ddBm.\n", power); - return 0; - } - - IWL_DEBUG_POWER("Setting upper limit clamp to %ddBm.\n", power); - priv->user_txpower_limit = power; - - /* set up new Tx powers for each and every channel, 2.4 and 5.x */ - - for (i = 0; i < priv->channel_count; i++) { - ch_info = &priv->channel_info[i]; - a_band = is_channel_a_band(ch_info); - - /* find minimum power of all user and regulatory constraints - * (does not consider h/w clipping limitations) */ - max_power = iwl3945_hw_reg_get_ch_txpower_limit(ch_info); - max_power = min(power, max_power); - if (max_power != ch_info->curr_txpow) { - ch_info->curr_txpow = max_power; - - /* this considers the h/w clipping limitations */ - iwl3945_hw_reg_set_new_power(priv, ch_info); - } - } - - /* update txpower settings for all channels, - * send to NIC if associated. */ - is_temp_calib_needed(priv); - iwl3945_hw_reg_comp_txpower_temp(priv); - - return 0; -} - -/* will add 3945 channel switch cmd handling later */ -int iwl3945_hw_channel_switch(struct iwl3945_priv *priv, u16 channel) -{ - return 0; -} - -/** - * iwl3945_reg_txpower_periodic - called when time to check our temperature. - * - * -- reset periodic timer - * -- see if temp has changed enough to warrant re-calibration ... if so: - * -- correct coeffs for temp (can reset temp timer) - * -- save this temp as "last", - * -- send new set of gain settings to NIC - * NOTE: This should continue working, even when we're not associated, - * so we can keep our internal table of scan powers current. */ -void iwl3945_reg_txpower_periodic(struct iwl3945_priv *priv) -{ - /* This will kick in the "brute force" - * iwl3945_hw_reg_comp_txpower_temp() below */ - if (!is_temp_calib_needed(priv)) - goto reschedule; - - /* Set up a new set of temp-adjusted TxPowers, send to NIC. - * This is based *only* on current temperature, - * ignoring any previous power measurements */ - iwl3945_hw_reg_comp_txpower_temp(priv); - - reschedule: - queue_delayed_work(priv->workqueue, - &priv->thermal_periodic, REG_RECALIB_PERIOD * HZ); -} - -static void iwl3945_bg_reg_txpower_periodic(struct work_struct *work) -{ - struct iwl3945_priv *priv = container_of(work, struct iwl3945_priv, - thermal_periodic.work); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - iwl3945_reg_txpower_periodic(priv); - mutex_unlock(&priv->mutex); -} - -/** - * iwl3945_hw_reg_get_ch_grp_index - find the channel-group index (0-4) - * for the channel. - * - * This function is used when initializing channel-info structs. - * - * NOTE: These channel groups do *NOT* match the bands above! - * These channel groups are based on factory-tested channels; - * on A-band, EEPROM's "group frequency" entries represent the top - * channel in each group 1-4. Group 5 All B/G channels are in group 0. - */ -static u16 iwl3945_hw_reg_get_ch_grp_index(struct iwl3945_priv *priv, - const struct iwl3945_channel_info *ch_info) -{ - struct iwl3945_eeprom_txpower_group *ch_grp = &priv->eeprom.groups[0]; - u8 group; - u16 group_index = 0; /* based on factory calib frequencies */ - u8 grp_channel; - - /* Find the group index for the channel ... don't use index 1(?) */ - if (is_channel_a_band(ch_info)) { - for (group = 1; group < 5; group++) { - grp_channel = ch_grp[group].group_channel; - if (ch_info->channel <= grp_channel) { - group_index = group; - break; - } - } - /* group 4 has a few channels *above* its factory cal freq */ - if (group == 5) - group_index = 4; - } else - group_index = 0; /* 2.4 GHz, group 0 */ - - IWL_DEBUG_POWER("Chnl %d mapped to grp %d\n", ch_info->channel, - group_index); - return group_index; -} - -/** - * iwl3945_hw_reg_get_matched_power_index - Interpolate to get nominal index - * - * Interpolate to get nominal (i.e. at factory calibration temperature) index - * into radio/DSP gain settings table for requested power. - */ -static int iwl3945_hw_reg_get_matched_power_index(struct iwl3945_priv *priv, - s8 requested_power, - s32 setting_index, s32 *new_index) -{ - const struct iwl3945_eeprom_txpower_group *chnl_grp = NULL; - s32 index0, index1; - s32 power = 2 * requested_power; - s32 i; - const struct iwl3945_eeprom_txpower_sample *samples; - s32 gains0, gains1; - s32 res; - s32 denominator; - - chnl_grp = &priv->eeprom.groups[setting_index]; - samples = chnl_grp->samples; - for (i = 0; i < 5; i++) { - if (power == samples[i].power) { - *new_index = samples[i].gain_index; - return 0; - } - } - - if (power > samples[1].power) { - index0 = 0; - index1 = 1; - } else if (power > samples[2].power) { - index0 = 1; - index1 = 2; - } else if (power > samples[3].power) { - index0 = 2; - index1 = 3; - } else { - index0 = 3; - index1 = 4; - } - - denominator = (s32) samples[index1].power - (s32) samples[index0].power; - if (denominator == 0) - return -EINVAL; - gains0 = (s32) samples[index0].gain_index * (1 << 19); - gains1 = (s32) samples[index1].gain_index * (1 << 19); - res = gains0 + (gains1 - gains0) * - ((s32) power - (s32) samples[index0].power) / denominator + - (1 << 18); - *new_index = res >> 19; - return 0; -} - -static void iwl3945_hw_reg_init_channel_groups(struct iwl3945_priv *priv) -{ - u32 i; - s32 rate_index; - const struct iwl3945_eeprom_txpower_group *group; - - IWL_DEBUG_POWER("Initializing factory calib info from EEPROM\n"); - - for (i = 0; i < IWL_NUM_TX_CALIB_GROUPS; i++) { - s8 *clip_pwrs; /* table of power levels for each rate */ - s8 satur_pwr; /* saturation power for each chnl group */ - group = &priv->eeprom.groups[i]; - - /* sanity check on factory saturation power value */ - if (group->saturation_power < 40) { - IWL_WARNING("Error: saturation power is %d, " - "less than minimum expected 40\n", - group->saturation_power); - return; - } - - /* - * Derive requested power levels for each rate, based on - * hardware capabilities (saturation power for band). - * Basic value is 3dB down from saturation, with further - * power reductions for highest 3 data rates. These - * backoffs provide headroom for high rate modulation - * power peaks, without too much distortion (clipping). - */ - /* we'll fill in this array with h/w max power levels */ - clip_pwrs = (s8 *) priv->clip_groups[i].clip_powers; - - /* divide factory saturation power by 2 to find -3dB level */ - satur_pwr = (s8) (group->saturation_power >> 1); - - /* fill in channel group's nominal powers for each rate */ - for (rate_index = 0; - rate_index < IWL_RATE_COUNT; rate_index++, clip_pwrs++) { - switch (rate_index) { - case IWL_RATE_36M_INDEX_TABLE: - if (i == 0) /* B/G */ - *clip_pwrs = satur_pwr; - else /* A */ - *clip_pwrs = satur_pwr - 5; - break; - case IWL_RATE_48M_INDEX_TABLE: - if (i == 0) - *clip_pwrs = satur_pwr - 7; - else - *clip_pwrs = satur_pwr - 10; - break; - case IWL_RATE_54M_INDEX_TABLE: - if (i == 0) - *clip_pwrs = satur_pwr - 9; - else - *clip_pwrs = satur_pwr - 12; - break; - default: - *clip_pwrs = satur_pwr; - break; - } - } - } -} - -/** - * iwl3945_txpower_set_from_eeprom - Set channel power info based on EEPROM - * - * Second pass (during init) to set up priv->channel_info - * - * Set up Tx-power settings in our channel info database for each VALID - * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values - * and current temperature. - * - * Since this is based on current temperature (at init time), these values may - * not be valid for very long, but it gives us a starting/default point, - * and allows us to active (i.e. using Tx) scan. - * - * This does *not* write values to NIC, just sets up our internal table. - */ -int iwl3945_txpower_set_from_eeprom(struct iwl3945_priv *priv) -{ - struct iwl3945_channel_info *ch_info = NULL; - struct iwl3945_channel_power_info *pwr_info; - int delta_index; - u8 rate_index; - u8 scan_tbl_index; - const s8 *clip_pwrs; /* array of power levels for each rate */ - u8 gain, dsp_atten; - s8 power; - u8 pwr_index, base_pwr_index, a_band; - u8 i; - int temperature; - - /* save temperature reference, - * so we can determine next time to calibrate */ - temperature = iwl3945_hw_reg_txpower_get_temperature(priv); - priv->last_temperature = temperature; - - iwl3945_hw_reg_init_channel_groups(priv); - - /* initialize Tx power info for each and every channel, 2.4 and 5.x */ - for (i = 0, ch_info = priv->channel_info; i < priv->channel_count; - i++, ch_info++) { - a_band = is_channel_a_band(ch_info); - if (!is_channel_valid(ch_info)) - continue; - - /* find this channel's channel group (*not* "band") index */ - ch_info->group_index = - iwl3945_hw_reg_get_ch_grp_index(priv, ch_info); - - /* Get this chnlgrp's rate->max/clip-powers table */ - clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers; - - /* calculate power index *adjustment* value according to - * diff between current temperature and factory temperature */ - delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature, - priv->eeprom.groups[ch_info->group_index]. - temperature); - - IWL_DEBUG_POWER("Delta index for channel %d: %d [%d]\n", - ch_info->channel, delta_index, temperature + - IWL_TEMP_CONVERT); - - /* set tx power value for all OFDM rates */ - for (rate_index = 0; rate_index < IWL_OFDM_RATES; - rate_index++) { - s32 uninitialized_var(power_idx); - int rc; - - /* use channel group's clip-power table, - * but don't exceed channel's max power */ - s8 pwr = min(ch_info->max_power_avg, - clip_pwrs[rate_index]); - - pwr_info = &ch_info->power_info[rate_index]; - - /* get base (i.e. at factory-measured temperature) - * power table index for this rate's power */ - rc = iwl3945_hw_reg_get_matched_power_index(priv, pwr, - ch_info->group_index, - &power_idx); - if (rc) { - IWL_ERROR("Invalid power index\n"); - return rc; - } - pwr_info->base_power_index = (u8) power_idx; - - /* temperature compensate */ - power_idx += delta_index; - - /* stay within range of gain table */ - power_idx = iwl3945_hw_reg_fix_power_index(power_idx); - - /* fill 1 OFDM rate's iwl3945_channel_power_info struct */ - pwr_info->requested_power = pwr; - pwr_info->power_table_index = (u8) power_idx; - pwr_info->tpc.tx_gain = - power_gain_table[a_band][power_idx].tx_gain; - pwr_info->tpc.dsp_atten = - power_gain_table[a_band][power_idx].dsp_atten; - } - - /* set tx power for CCK rates, based on OFDM 12 Mbit settings*/ - pwr_info = &ch_info->power_info[IWL_RATE_12M_INDEX_TABLE]; - power = pwr_info->requested_power + - IWL_CCK_FROM_OFDM_POWER_DIFF; - pwr_index = pwr_info->power_table_index + - IWL_CCK_FROM_OFDM_INDEX_DIFF; - base_pwr_index = pwr_info->base_power_index + - IWL_CCK_FROM_OFDM_INDEX_DIFF; - - /* stay within table range */ - pwr_index = iwl3945_hw_reg_fix_power_index(pwr_index); - gain = power_gain_table[a_band][pwr_index].tx_gain; - dsp_atten = power_gain_table[a_band][pwr_index].dsp_atten; - - /* fill each CCK rate's iwl3945_channel_power_info structure - * NOTE: All CCK-rate Txpwrs are the same for a given chnl! - * NOTE: CCK rates start at end of OFDM rates! */ - for (rate_index = 0; - rate_index < IWL_CCK_RATES; rate_index++) { - pwr_info = &ch_info->power_info[rate_index+IWL_OFDM_RATES]; - pwr_info->requested_power = power; - pwr_info->power_table_index = pwr_index; - pwr_info->base_power_index = base_pwr_index; - pwr_info->tpc.tx_gain = gain; - pwr_info->tpc.dsp_atten = dsp_atten; - } - - /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ - for (scan_tbl_index = 0; - scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) { - s32 actual_index = (scan_tbl_index == 0) ? - IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE; - iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index, - actual_index, clip_pwrs, ch_info, a_band); - } - } - - return 0; -} - -int iwl3945_hw_rxq_stop(struct iwl3945_priv *priv) -{ - int rc; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - rc = iwl3945_grab_nic_access(priv); - if (rc) { - spin_unlock_irqrestore(&priv->lock, flags); - return rc; - } - - iwl3945_write_direct32(priv, FH_RCSR_CONFIG(0), 0); - rc = iwl3945_poll_direct_bit(priv, FH_RSSR_STATUS, - FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000); - if (rc < 0) - IWL_ERROR("Can't stop Rx DMA.\n"); - - iwl3945_release_nic_access(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -int iwl3945_hw_tx_queue_init(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq) -{ - int rc; - unsigned long flags; - int txq_id = txq->q.id; - - struct iwl3945_shared *shared_data = priv->hw_setting.shared_virt; - - shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr); - - spin_lock_irqsave(&priv->lock, flags); - rc = iwl3945_grab_nic_access(priv); - if (rc) { - spin_unlock_irqrestore(&priv->lock, flags); - return rc; - } - iwl3945_write_direct32(priv, FH_CBCC_CTRL(txq_id), 0); - iwl3945_write_direct32(priv, FH_CBCC_BASE(txq_id), 0); - - iwl3945_write_direct32(priv, FH_TCSR_CONFIG(txq_id), - ALM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT | - ALM_FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF | - ALM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD | - ALM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL | - ALM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE); - iwl3945_release_nic_access(priv); - - /* fake read to flush all prev. writes */ - iwl3945_read32(priv, FH_TSSR_CBB_BASE); - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -int iwl3945_hw_get_rx_read(struct iwl3945_priv *priv) -{ - struct iwl3945_shared *shared_data = priv->hw_setting.shared_virt; - - return le32_to_cpu(shared_data->rx_read_ptr[0]); -} - -/** - * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table - */ -int iwl3945_init_hw_rate_table(struct iwl3945_priv *priv) -{ - int rc, i, index, prev_index; - struct iwl3945_rate_scaling_cmd rate_cmd = { - .reserved = {0, 0, 0}, - }; - struct iwl3945_rate_scaling_info *table = rate_cmd.table; - - for (i = 0; i < ARRAY_SIZE(iwl3945_rates); i++) { - index = iwl3945_rates[i].table_rs_index; - - table[index].rate_n_flags = - iwl3945_hw_set_rate_n_flags(iwl3945_rates[i].plcp, 0); - table[index].try_cnt = priv->retry_rate; - prev_index = iwl3945_get_prev_ieee_rate(i); - table[index].next_rate_index = - iwl3945_rates[prev_index].table_rs_index; - } - - switch (priv->band) { - case IEEE80211_BAND_5GHZ: - IWL_DEBUG_RATE("Select A mode rate scale\n"); - /* If one of the following CCK rates is used, - * have it fall back to the 6M OFDM rate */ - for (i = IWL_RATE_1M_INDEX_TABLE; - i <= IWL_RATE_11M_INDEX_TABLE; i++) - table[i].next_rate_index = - iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index; - - /* Don't fall back to CCK rates */ - table[IWL_RATE_12M_INDEX_TABLE].next_rate_index = - IWL_RATE_9M_INDEX_TABLE; - - /* Don't drop out of OFDM rates */ - table[IWL_RATE_6M_INDEX_TABLE].next_rate_index = - iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index; - break; - - case IEEE80211_BAND_2GHZ: - IWL_DEBUG_RATE("Select B/G mode rate scale\n"); - /* If an OFDM rate is used, have it fall back to the - * 1M CCK rates */ - - if (!(priv->sta_supp_rates & IWL_OFDM_RATES_MASK) && - iwl3945_is_associated(priv)) { - - index = IWL_FIRST_CCK_RATE; - for (i = IWL_RATE_6M_INDEX_TABLE; - i <= IWL_RATE_54M_INDEX_TABLE; i++) - table[i].next_rate_index = - iwl3945_rates[index].table_rs_index; - - index = IWL_RATE_11M_INDEX_TABLE; - /* CCK shouldn't fall back to OFDM... */ - table[index].next_rate_index = IWL_RATE_5M_INDEX_TABLE; - } - break; - - default: - WARN_ON(1); - break; - } - - /* Update the rate scaling for control frame Tx */ - rate_cmd.table_id = 0; - rc = iwl3945_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd), - &rate_cmd); - if (rc) - return rc; - - /* Update the rate scaling for data frame Tx */ - rate_cmd.table_id = 1; - return iwl3945_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd), - &rate_cmd); -} - -/* Called when initializing driver */ -int iwl3945_hw_set_hw_setting(struct iwl3945_priv *priv) -{ - memset((void *)&priv->hw_setting, 0, - sizeof(struct iwl3945_driver_hw_info)); - - priv->hw_setting.shared_virt = - pci_alloc_consistent(priv->pci_dev, - sizeof(struct iwl3945_shared), - &priv->hw_setting.shared_phys); - - if (!priv->hw_setting.shared_virt) { - IWL_ERROR("failed to allocate pci memory\n"); - mutex_unlock(&priv->mutex); - return -ENOMEM; - } - - priv->hw_setting.rx_buf_size = IWL_RX_BUF_SIZE; - priv->hw_setting.max_pkt_size = 2342; - priv->hw_setting.tx_cmd_len = sizeof(struct iwl3945_tx_cmd); - priv->hw_setting.max_rxq_size = RX_QUEUE_SIZE; - priv->hw_setting.max_rxq_log = RX_QUEUE_SIZE_LOG; - priv->hw_setting.max_stations = IWL3945_STATION_COUNT; - priv->hw_setting.bcast_sta_id = IWL3945_BROADCAST_ID; - - priv->hw_setting.tx_ant_num = 2; - return 0; -} - -unsigned int iwl3945_hw_get_beacon_cmd(struct iwl3945_priv *priv, - struct iwl3945_frame *frame, u8 rate) -{ - struct iwl3945_tx_beacon_cmd *tx_beacon_cmd; - unsigned int frame_size; - - tx_beacon_cmd = (struct iwl3945_tx_beacon_cmd *)&frame->u; - memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); - - tx_beacon_cmd->tx.sta_id = priv->hw_setting.bcast_sta_id; - tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - - frame_size = iwl3945_fill_beacon_frame(priv, - tx_beacon_cmd->frame, - sizeof(frame->u) - sizeof(*tx_beacon_cmd)); - - BUG_ON(frame_size > MAX_MPDU_SIZE); - tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); - - tx_beacon_cmd->tx.rate = rate; - tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK | - TX_CMD_FLG_TSF_MSK); - - /* supp_rates[0] == OFDM start at IWL_FIRST_OFDM_RATE*/ - tx_beacon_cmd->tx.supp_rates[0] = - (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; - - tx_beacon_cmd->tx.supp_rates[1] = - (IWL_CCK_BASIC_RATES_MASK & 0xF); - - return sizeof(struct iwl3945_tx_beacon_cmd) + frame_size; -} - -void iwl3945_hw_rx_handler_setup(struct iwl3945_priv *priv) -{ - priv->rx_handlers[REPLY_TX] = iwl3945_rx_reply_tx; - priv->rx_handlers[REPLY_3945_RX] = iwl3945_rx_reply_rx; -} - -void iwl3945_hw_setup_deferred_work(struct iwl3945_priv *priv) -{ - INIT_DELAYED_WORK(&priv->thermal_periodic, - iwl3945_bg_reg_txpower_periodic); -} - -void iwl3945_hw_cancel_deferred_work(struct iwl3945_priv *priv) -{ - cancel_delayed_work(&priv->thermal_periodic); -} - -static struct iwl_3945_cfg iwl3945_bg_cfg = { - .name = "3945BG", - .fw_name_pre = IWL3945_FW_PRE, - .ucode_api_max = IWL3945_UCODE_API_MAX, - .ucode_api_min = IWL3945_UCODE_API_MIN, - .sku = IWL_SKU_G, -}; - -static struct iwl_3945_cfg iwl3945_abg_cfg = { - .name = "3945ABG", - .fw_name_pre = IWL3945_FW_PRE, - .ucode_api_max = IWL3945_UCODE_API_MAX, - .ucode_api_min = IWL3945_UCODE_API_MIN, - .sku = IWL_SKU_A|IWL_SKU_G, -}; - -struct pci_device_id iwl3945_hw_card_ids[] = { - {IWL_PCI_DEVICE(0x4222, 0x1005, iwl3945_bg_cfg)}, - {IWL_PCI_DEVICE(0x4222, 0x1034, iwl3945_bg_cfg)}, - {IWL_PCI_DEVICE(0x4222, 0x1044, iwl3945_bg_cfg)}, - {IWL_PCI_DEVICE(0x4227, 0x1014, iwl3945_bg_cfg)}, - {IWL_PCI_DEVICE(0x4222, PCI_ANY_ID, iwl3945_abg_cfg)}, - {IWL_PCI_DEVICE(0x4227, PCI_ANY_ID, iwl3945_abg_cfg)}, - {0} -}; - -MODULE_DEVICE_TABLE(pci, iwl3945_hw_card_ids); |