diff options
Diffstat (limited to 'drivers/net/wireless/iwlegacy/4965-mac.c')
| -rw-r--r-- | drivers/net/wireless/iwlegacy/4965-mac.c | 88 |
1 files changed, 50 insertions, 38 deletions
diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index 9a95045c97b..c159c05db6e 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -92,7 +92,6 @@ il4965_check_abort_status(struct il_priv *il, u8 frame_count, u32 status) * EEPROM */ struct il_mod_params il4965_mod_params = { - .amsdu_size_8K = 1, .restart_fw = 1, /* the rest are 0 by default */ }; @@ -574,9 +573,11 @@ il4965_translate_rx_status(struct il_priv *il, u32 decrypt_in) return decrypt_out; } +#define SMALL_PACKET_SIZE 256 + static void il4965_pass_packet_to_mac80211(struct il_priv *il, struct ieee80211_hdr *hdr, - u16 len, u32 ampdu_status, struct il_rx_buf *rxb, + u32 len, u32 ampdu_status, struct il_rx_buf *rxb, struct ieee80211_rx_status *stats) { struct sk_buff *skb; @@ -588,26 +589,35 @@ il4965_pass_packet_to_mac80211(struct il_priv *il, struct ieee80211_hdr *hdr, return; } + if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) { + il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE); + D_INFO("Woke queues - frame received on passive channel\n"); + } + /* In case of HW accelerated crypto and bad decryption, drop */ if (!il->cfg->mod_params->sw_crypto && il_set_decrypted_flag(il, hdr, ampdu_status, stats)) return; - skb = dev_alloc_skb(128); + skb = dev_alloc_skb(SMALL_PACKET_SIZE); if (!skb) { IL_ERR("dev_alloc_skb failed\n"); return; } - skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len, - len); + if (len <= SMALL_PACKET_SIZE) { + memcpy(skb_put(skb, len), hdr, len); + } else { + skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), + len, PAGE_SIZE << il->hw_params.rx_page_order); + il->alloc_rxb_page--; + rxb->page = NULL; + } il_update_stats(il, false, fc, len); memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); ieee80211_rx(il->hw, skb); - il->alloc_rxb_page--; - rxb->page = NULL; } /* Called for N_RX (legacy ABG frames), or @@ -660,7 +670,7 @@ il4965_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb) } if ((unlikely(phy_res->cfg_phy_cnt > 20))) { - D_DROP("dsp size out of range [0,20]: %d/n", + D_DROP("dsp size out of range [0,20]: %d\n", phy_res->cfg_phy_cnt); return; } @@ -794,7 +804,7 @@ il4965_get_channels_for_scan(struct il_priv *il, struct ieee80211_vif *vif, } if (!is_active || il_is_channel_passive(ch_info) || - (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) + (chan->flags & IEEE80211_CHAN_NO_IR)) scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; else scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; @@ -2806,6 +2816,19 @@ il4965_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb) return; } + /* + * Firmware will not transmit frame on passive channel, if it not yet + * received some valid frame on that channel. When this error happen + * we have to wait until firmware will unblock itself i.e. when we + * note received beacon or other frame. We unblock queues in + * il4965_pass_packet_to_mac80211 or in il_mac_bss_info_changed. + */ + if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) && + il->iw_mode == NL80211_IFTYPE_STATION) { + il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE); + D_INFO("Stopped queues - RX waiting on passive channel\n"); + } + spin_lock_irqsave(&il->sta_lock, flags); if (txq->sched_retry) { const u32 scd_ssn = il4965_get_scd_ssn(tx_resp); @@ -4250,17 +4273,7 @@ il4965_rx_handle(struct il_priv *il) len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK; len += sizeof(u32); /* account for status word */ - /* Reclaim a command buffer only if this packet is a response - * to a (driver-originated) command. - * If the packet (e.g. Rx frame) originated from uCode, - * there is no command buffer to reclaim. - * Ucode should set SEQ_RX_FRAME bit if ucode-originated, - * but apparently a few don't get set; catch them here. */ - reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) && - (pkt->hdr.cmd != N_RX_PHY) && (pkt->hdr.cmd != N_RX) && - (pkt->hdr.cmd != N_RX_MPDU) && - (pkt->hdr.cmd != N_COMPRESSED_BA) && - (pkt->hdr.cmd != N_STATS) && (pkt->hdr.cmd != C_TX); + reclaim = il_need_reclaim(il, pkt); /* Based on type of command response or notification, * handle those that need handling via function in @@ -4442,13 +4455,13 @@ il4965_irq_tasklet(struct il_priv *il) * is killed. Hence update the killswitch state here. The * rfkill handler will care about restarting if needed. */ - if (!test_bit(S_ALIVE, &il->status)) { - if (hw_rf_kill) - set_bit(S_RFKILL, &il->status); - else - clear_bit(S_RFKILL, &il->status); - wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill); + if (hw_rf_kill) { + set_bit(S_RFKILL, &il->status); + } else { + clear_bit(S_RFKILL, &il->status); + il_force_reset(il, true); } + wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill); handled |= CSR_INT_BIT_RF_KILL; } @@ -4567,7 +4580,7 @@ il4965_store_debug_level(struct device *d, struct device_attribute *attr, unsigned long val; int ret; - ret = strict_strtoul(buf, 0, &val); + ret = kstrtoul(buf, 0, &val); if (ret) IL_ERR("%s is not in hex or decimal form.\n", buf); else @@ -4614,7 +4627,7 @@ il4965_store_tx_power(struct device *d, struct device_attribute *attr, unsigned long val; int ret; - ret = strict_strtoul(buf, 10, &val); + ret = kstrtoul(buf, 10, &val); if (ret) IL_INFO("%s is not in decimal form.\n", buf); else { @@ -5316,6 +5329,9 @@ il4965_alive_start(struct il_priv *il) il->active_rate = RATES_MASK; + il_power_update_mode(il, true); + D_INFO("Updated power mode\n"); + if (il_is_associated(il)) { struct il_rxon_cmd *active_rxon = (struct il_rxon_cmd *)&il->active; @@ -5346,9 +5362,6 @@ il4965_alive_start(struct il_priv *il) D_INFO("ALIVE processing complete.\n"); wake_up(&il->wait_command_queue); - il_power_update_mode(il, true); - D_INFO("Updated power mode\n"); - return; restart: @@ -5741,7 +5754,8 @@ il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length) hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_AMPDU_AGGREGATION | IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SPECTRUM_MGMT | - IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS; + IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_SUPPORTS_DYNAMIC_PS; if (il->cfg->sku & IL_SKU_N) hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | @@ -5753,9 +5767,9 @@ il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length) hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); - hw->wiphy->flags |= - WIPHY_FLAG_CUSTOM_REGULATORY | WIPHY_FLAG_DISABLE_BEACON_HINTS | - WIPHY_FLAG_IBSS_RSN; + hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; + hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG | + REGULATORY_DISABLE_BEACON_HINTS; /* * For now, disable PS by default because it affects @@ -6681,7 +6695,6 @@ out_free_eeprom: out_iounmap: iounmap(il->hw_base); out_pci_release_regions: - pci_set_drvdata(pdev, NULL); pci_release_regions(pdev); out_pci_disable_device: pci_disable_device(pdev); @@ -6762,7 +6775,6 @@ il4965_pci_remove(struct pci_dev *pdev) iounmap(il->hw_base); pci_release_regions(pdev); pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); il4965_uninit_drv(il); @@ -6853,6 +6865,6 @@ module_param_named(11n_disable, il4965_mod_params.disable_11n, int, S_IRUGO); MODULE_PARM_DESC(11n_disable, "disable 11n functionality"); module_param_named(amsdu_size_8K, il4965_mod_params.amsdu_size_8K, int, S_IRUGO); -MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size"); +MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0 [disabled])"); module_param_named(fw_restart, il4965_mod_params.restart_fw, int, S_IRUGO); MODULE_PARM_DESC(fw_restart, "restart firmware in case of error"); |
