diff options
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h')
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h | 224 |
1 files changed, 143 insertions, 81 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h index 29bf78d264e..3deab7959a0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h @@ -48,7 +48,13 @@ #define SBSDIO_NUM_FUNCTION 3 /* function 0 vendor specific CCCR registers */ -#define SDIO_CCCR_BRCM_SEPINT 0xf2 +#define SDIO_CCCR_BRCM_CARDCAP 0xf0 +#define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT 0x02 +#define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT 0x04 +#define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC 0x08 +#define SDIO_CCCR_BRCM_CARDCTRL 0xf1 +#define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET 0x02 +#define SDIO_CCCR_BRCM_SEPINT 0xf2 #define SDIO_SEPINT_MASK 0x01 #define SDIO_SEPINT_OE 0x02 @@ -97,9 +103,23 @@ #define SBSDIO_FUNC1_RFRAMEBCLO 0x1001B /* Read Frame Byte Count High */ #define SBSDIO_FUNC1_RFRAMEBCHI 0x1001C +/* MesBusyCtl (rev 11) */ +#define SBSDIO_FUNC1_MESBUSYCTRL 0x1001D +/* Sdio Core Rev 12 */ +#define SBSDIO_FUNC1_WAKEUPCTRL 0x1001E +#define SBSDIO_FUNC1_WCTRL_ALPWAIT_MASK 0x1 +#define SBSDIO_FUNC1_WCTRL_ALPWAIT_SHIFT 0 +#define SBSDIO_FUNC1_WCTRL_HTWAIT_MASK 0x2 +#define SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT 1 +#define SBSDIO_FUNC1_SLEEPCSR 0x1001F +#define SBSDIO_FUNC1_SLEEPCSR_KSO_MASK 0x1 +#define SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT 0 +#define SBSDIO_FUNC1_SLEEPCSR_KSO_EN 1 +#define SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK 0x2 +#define SBSDIO_FUNC1_SLEEPCSR_DEVON_SHIFT 1 #define SBSDIO_FUNC1_MISC_REG_START 0x10000 /* f1 misc register start */ -#define SBSDIO_FUNC1_MISC_REG_LIMIT 0x1001C /* f1 misc register end */ +#define SBSDIO_FUNC1_MISC_REG_LIMIT 0x1001F /* f1 misc register end */ /* function 1 OCP space */ @@ -144,40 +164,129 @@ struct brcmf_sdio; struct brcmf_sdio_dev { struct sdio_func *func[SDIO_MAX_FUNCS]; u8 num_funcs; /* Supported funcs on client */ - u32 func_cis_ptr[SDIOD_MAX_IOFUNCS]; u32 sbwad; /* Save backplane window address */ - void *bus; + struct brcmf_sdio *bus; atomic_t suspend; /* suspend flag */ - wait_queue_head_t request_byte_wait; wait_queue_head_t request_word_wait; - wait_queue_head_t request_chain_wait; wait_queue_head_t request_buffer_wait; struct device *dev; struct brcmf_bus *bus_if; -#ifdef CONFIG_BRCMFMAC_SDIO_OOB - unsigned int irq; /* oob interrupt number */ - unsigned long irq_flags; /* board specific oob flags */ + struct brcmfmac_sdio_platform_data *pdata; + bool oob_irq_requested; bool irq_en; /* irq enable flags */ spinlock_t irq_en_lock; bool irq_wake; /* irq wake enable flags */ -#endif /* CONFIG_BRCMFMAC_SDIO_OOB */ + bool sg_support; + uint max_request_size; + ushort max_segment_count; + uint max_segment_size; + uint txglomsz; + struct sg_table sgtable; +}; + +/* sdio core registers */ +struct sdpcmd_regs { + u32 corecontrol; /* 0x00, rev8 */ + u32 corestatus; /* rev8 */ + u32 PAD[1]; + u32 biststatus; /* rev8 */ + + /* PCMCIA access */ + u16 pcmciamesportaladdr; /* 0x010, rev8 */ + u16 PAD[1]; + u16 pcmciamesportalmask; /* rev8 */ + u16 PAD[1]; + u16 pcmciawrframebc; /* rev8 */ + u16 PAD[1]; + u16 pcmciaunderflowtimer; /* rev8 */ + u16 PAD[1]; + + /* interrupt */ + u32 intstatus; /* 0x020, rev8 */ + u32 hostintmask; /* rev8 */ + u32 intmask; /* rev8 */ + u32 sbintstatus; /* rev8 */ + u32 sbintmask; /* rev8 */ + u32 funcintmask; /* rev4 */ + u32 PAD[2]; + u32 tosbmailbox; /* 0x040, rev8 */ + u32 tohostmailbox; /* rev8 */ + u32 tosbmailboxdata; /* rev8 */ + u32 tohostmailboxdata; /* rev8 */ + + /* synchronized access to registers in SDIO clock domain */ + u32 sdioaccess; /* 0x050, rev8 */ + u32 PAD[3]; + + /* PCMCIA frame control */ + u8 pcmciaframectrl; /* 0x060, rev8 */ + u8 PAD[3]; + u8 pcmciawatermark; /* rev8 */ + u8 PAD[155]; + + /* interrupt batching control */ + u32 intrcvlazy; /* 0x100, rev8 */ + u32 PAD[3]; + + /* counters */ + u32 cmd52rd; /* 0x110, rev8 */ + u32 cmd52wr; /* rev8 */ + u32 cmd53rd; /* rev8 */ + u32 cmd53wr; /* rev8 */ + u32 abort; /* rev8 */ + u32 datacrcerror; /* rev8 */ + u32 rdoutofsync; /* rev8 */ + u32 wroutofsync; /* rev8 */ + u32 writebusy; /* rev8 */ + u32 readwait; /* rev8 */ + u32 readterm; /* rev8 */ + u32 writeterm; /* rev8 */ + u32 PAD[40]; + u32 clockctlstatus; /* rev8 */ + u32 PAD[7]; + + u32 PAD[128]; /* DMA engines */ + + /* SDIO/PCMCIA CIS region */ + char cis[512]; /* 0x400-0x5ff, rev6 */ + + /* PCMCIA function control registers */ + char pcmciafcr[256]; /* 0x600-6ff, rev6 */ + u16 PAD[55]; + + /* PCMCIA backplane access */ + u16 backplanecsr; /* 0x76E, rev6 */ + u16 backplaneaddr0; /* rev6 */ + u16 backplaneaddr1; /* rev6 */ + u16 backplaneaddr2; /* rev6 */ + u16 backplaneaddr3; /* rev6 */ + u16 backplanedata0; /* rev6 */ + u16 backplanedata1; /* rev6 */ + u16 backplanedata2; /* rev6 */ + u16 backplanedata3; /* rev6 */ + u16 PAD[31]; + + /* sprom "size" & "blank" info */ + u16 spromstatus; /* 0x7BE, rev2 */ + u32 PAD[464]; + + u16 PAD[0x80]; }; /* Register/deregister interrupt handler. */ -extern int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev); -extern int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev); +int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev); +int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev); /* sdio device register access interface */ -extern u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); -extern u32 brcmf_sdio_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); -extern void brcmf_sdio_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, - u8 data, int *ret); -extern void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, - u32 data, int *ret); +u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); +u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); +void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 data, + int *ret); +void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data, + int *ret); /* Buffer transfer to/from device (client) core via cmd53. * fn: function number - * addr: backplane address (i.e. >= regsva from attach) * flags: backplane width, address increment, sync/async * buf: pointer to memory data buffer * nbytes: number of bytes to transfer to/from buf @@ -187,22 +296,14 @@ extern void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, * Returns 0 or error code. * NOTE: Async operation is not currently supported. */ -extern int -brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, - uint flags, struct sk_buff *pkt); -extern int -brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, - uint flags, u8 *buf, uint nbytes); - -extern int -brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, - uint flags, struct sk_buff *pkt); -extern int -brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, - uint flags, u8 *buf, uint nbytes); -extern int -brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, - uint flags, struct sk_buff_head *pktq); +int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev, + struct sk_buff_head *pktq); +int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes); + +int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt); +int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes); +int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev, + struct sk_buff_head *pktq, uint totlen); /* Flags bits */ @@ -210,8 +311,6 @@ brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, #define SDIO_REQ_4BYTE 0x1 /* Fixed address (FIFO) (vs. incrementing address) */ #define SDIO_REQ_FIXED 0x2 -/* Async request (vs. sync request) */ -#define SDIO_REQ_ASYNC 0x4 /* Read/write to memory block (F1, no FIFO) via CMD53 (sync only). * rw: read or write (0/1) @@ -220,53 +319,16 @@ brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, * nbytes: number of bytes to transfer to/from buf * Returns 0 or error code. */ -extern int brcmf_sdcard_rwdata(struct brcmf_sdio_dev *sdiodev, uint rw, - u32 addr, u8 *buf, uint nbytes); +int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address, + u8 *data, uint size); /* Issue an abort to the specified function */ -extern int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn); +int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn); -/* platform specific/high level functions */ -extern int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev); -extern int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev); +struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev); +void brcmf_sdio_remove(struct brcmf_sdio *bus); +void brcmf_sdio_isr(struct brcmf_sdio *bus); -extern int brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, - u32 address); +void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, uint wdtick); -/* attach, return handler on success, NULL if failed. - * The handler shall be provided by all subsequent calls. No local cache - * cfghdl points to the starting address of pci device mapped memory - */ -extern int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev); -extern void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev); - -/* read or write one byte using cmd52 */ -extern int brcmf_sdioh_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw, - uint fnc, uint addr, u8 *byte); - -/* read or write 2/4 bytes using cmd53 */ -extern int -brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev, - uint rw, uint fnc, uint addr, - u32 *word, uint nbyte); - -/* read or write any buffer using cmd53 */ -extern int -brcmf_sdioh_request_buffer(struct brcmf_sdio_dev *sdiodev, - uint fix_inc, uint rw, uint fnc_num, u32 addr, - struct sk_buff *pkt); -extern int -brcmf_sdioh_request_chain(struct brcmf_sdio_dev *sdiodev, uint fix_inc, - uint write, uint func, uint addr, - struct sk_buff_head *pktq); - -/* Watchdog timer interface for pm ops */ -extern void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev, - bool enable); - -extern void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev); -extern void brcmf_sdbrcm_disconnect(void *ptr); -extern void brcmf_sdbrcm_isr(void *arg); - -extern void brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick); #endif /* _BRCM_SDH_H_ */ |