diff options
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h')
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h | 231 |
1 files changed, 0 insertions, 231 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h deleted file mode 100644 index 83c041f1bf4..00000000000 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Copyright (c) 2011 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _BRCMFMAC_SDIO_CHIP_H_ -#define _BRCMFMAC_SDIO_CHIP_H_ - -/* - * Core reg address translation. - * Both macro's returns a 32 bits byte address on the backplane bus. - */ -#define CORE_CC_REG(base, field) \ - (base + offsetof(struct chipcregs, field)) -#define CORE_BUS_REG(base, field) \ - (base + offsetof(struct sdpcmd_regs, field)) -#define CORE_SB(base, field) \ - (base + SBCONFIGOFF + offsetof(struct sbconfig, field)) - -/* SDIO function 1 register CHIPCLKCSR */ -/* Force ALP request to backplane */ -#define SBSDIO_FORCE_ALP 0x01 -/* Force HT request to backplane */ -#define SBSDIO_FORCE_HT 0x02 -/* Force ILP request to backplane */ -#define SBSDIO_FORCE_ILP 0x04 -/* Make ALP ready (power up xtal) */ -#define SBSDIO_ALP_AVAIL_REQ 0x08 -/* Make HT ready (power up PLL) */ -#define SBSDIO_HT_AVAIL_REQ 0x10 -/* Squelch clock requests from HW */ -#define SBSDIO_FORCE_HW_CLKREQ_OFF 0x20 -/* Status: ALP is ready */ -#define SBSDIO_ALP_AVAIL 0x40 -/* Status: HT is ready */ -#define SBSDIO_HT_AVAIL 0x80 -#define SBSDIO_AVBITS (SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL) -#define SBSDIO_ALPAV(regval) ((regval) & SBSDIO_AVBITS) -#define SBSDIO_HTAV(regval) (((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS) -#define SBSDIO_ALPONLY(regval) (SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval)) -#define SBSDIO_CLKAV(regval, alponly) \ - (SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval))) - -#define BRCMF_MAX_CORENUM 6 - -struct chip_core_info { - u16 id; - u16 rev; - u32 base; - u32 wrapbase; - u32 caps; - u32 cib; -}; - -struct chip_info { - u32 chip; - u32 chiprev; - u32 socitype; - /* core info */ - /* always put chipcommon core at 0, bus core at 1 */ - struct chip_core_info c_inf[BRCMF_MAX_CORENUM]; - u32 pmurev; - u32 pmucaps; - u32 ramsize; - u32 rambase; - u32 rst_vec; /* reset vertor for ARM CR4 core */ - - bool (*iscoreup)(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci, - u16 coreid); - u32 (*corerev)(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci, - u16 coreid); - void (*coredisable)(struct brcmf_sdio_dev *sdiodev, - struct chip_info *ci, u16 coreid, u32 core_bits); - void (*resetcore)(struct brcmf_sdio_dev *sdiodev, - struct chip_info *ci, u16 coreid, u32 core_bits); -}; - -struct sbconfig { - u32 PAD[2]; - u32 sbipsflag; /* initiator port ocp slave flag */ - u32 PAD[3]; - u32 sbtpsflag; /* target port ocp slave flag */ - u32 PAD[11]; - u32 sbtmerrloga; /* (sonics >= 2.3) */ - u32 PAD; - u32 sbtmerrlog; /* (sonics >= 2.3) */ - u32 PAD[3]; - u32 sbadmatch3; /* address match3 */ - u32 PAD; - u32 sbadmatch2; /* address match2 */ - u32 PAD; - u32 sbadmatch1; /* address match1 */ - u32 PAD[7]; - u32 sbimstate; /* initiator agent state */ - u32 sbintvec; /* interrupt mask */ - u32 sbtmstatelow; /* target state */ - u32 sbtmstatehigh; /* target state */ - u32 sbbwa0; /* bandwidth allocation table0 */ - u32 PAD; - u32 sbimconfiglow; /* initiator configuration */ - u32 sbimconfighigh; /* initiator configuration */ - u32 sbadmatch0; /* address match0 */ - u32 PAD; - u32 sbtmconfiglow; /* target configuration */ - u32 sbtmconfighigh; /* target configuration */ - u32 sbbconfig; /* broadcast configuration */ - u32 PAD; - u32 sbbstate; /* broadcast state */ - u32 PAD[3]; - u32 sbactcnfg; /* activate configuration */ - u32 PAD[3]; - u32 sbflagst; /* current sbflags */ - u32 PAD[3]; - u32 sbidlow; /* identification */ - u32 sbidhigh; /* identification */ -}; - -/* sdio core registers */ -struct sdpcmd_regs { - u32 corecontrol; /* 0x00, rev8 */ - u32 corestatus; /* rev8 */ - u32 PAD[1]; - u32 biststatus; /* rev8 */ - - /* PCMCIA access */ - u16 pcmciamesportaladdr; /* 0x010, rev8 */ - u16 PAD[1]; - u16 pcmciamesportalmask; /* rev8 */ - u16 PAD[1]; - u16 pcmciawrframebc; /* rev8 */ - u16 PAD[1]; - u16 pcmciaunderflowtimer; /* rev8 */ - u16 PAD[1]; - - /* interrupt */ - u32 intstatus; /* 0x020, rev8 */ - u32 hostintmask; /* rev8 */ - u32 intmask; /* rev8 */ - u32 sbintstatus; /* rev8 */ - u32 sbintmask; /* rev8 */ - u32 funcintmask; /* rev4 */ - u32 PAD[2]; - u32 tosbmailbox; /* 0x040, rev8 */ - u32 tohostmailbox; /* rev8 */ - u32 tosbmailboxdata; /* rev8 */ - u32 tohostmailboxdata; /* rev8 */ - - /* synchronized access to registers in SDIO clock domain */ - u32 sdioaccess; /* 0x050, rev8 */ - u32 PAD[3]; - - /* PCMCIA frame control */ - u8 pcmciaframectrl; /* 0x060, rev8 */ - u8 PAD[3]; - u8 pcmciawatermark; /* rev8 */ - u8 PAD[155]; - - /* interrupt batching control */ - u32 intrcvlazy; /* 0x100, rev8 */ - u32 PAD[3]; - - /* counters */ - u32 cmd52rd; /* 0x110, rev8 */ - u32 cmd52wr; /* rev8 */ - u32 cmd53rd; /* rev8 */ - u32 cmd53wr; /* rev8 */ - u32 abort; /* rev8 */ - u32 datacrcerror; /* rev8 */ - u32 rdoutofsync; /* rev8 */ - u32 wroutofsync; /* rev8 */ - u32 writebusy; /* rev8 */ - u32 readwait; /* rev8 */ - u32 readterm; /* rev8 */ - u32 writeterm; /* rev8 */ - u32 PAD[40]; - u32 clockctlstatus; /* rev8 */ - u32 PAD[7]; - - u32 PAD[128]; /* DMA engines */ - - /* SDIO/PCMCIA CIS region */ - char cis[512]; /* 0x400-0x5ff, rev6 */ - - /* PCMCIA function control registers */ - char pcmciafcr[256]; /* 0x600-6ff, rev6 */ - u16 PAD[55]; - - /* PCMCIA backplane access */ - u16 backplanecsr; /* 0x76E, rev6 */ - u16 backplaneaddr0; /* rev6 */ - u16 backplaneaddr1; /* rev6 */ - u16 backplaneaddr2; /* rev6 */ - u16 backplaneaddr3; /* rev6 */ - u16 backplanedata0; /* rev6 */ - u16 backplanedata1; /* rev6 */ - u16 backplanedata2; /* rev6 */ - u16 backplanedata3; /* rev6 */ - u16 PAD[31]; - - /* sprom "size" & "blank" info */ - u16 spromstatus; /* 0x7BE, rev2 */ - u32 PAD[464]; - - u16 PAD[0x80]; -}; - -extern int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev, - struct chip_info **ci_ptr, u32 regs); -extern void brcmf_sdio_chip_detach(struct chip_info **ci_ptr); -extern void brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev, - struct chip_info *ci, - u32 drivestrength); -extern u8 brcmf_sdio_chip_getinfidx(struct chip_info *ci, u16 coreid); -extern void brcmf_sdio_chip_enter_download(struct brcmf_sdio_dev *sdiodev, - struct chip_info *ci); -extern bool brcmf_sdio_chip_exit_download(struct brcmf_sdio_dev *sdiodev, - struct chip_info *ci, char *nvram_dat, - uint nvram_sz); - -#endif /* _BRCMFMAC_SDIO_CHIP_H_ */ |