diff options
Diffstat (limited to 'drivers/net/wireless/b43legacy/phy.c')
| -rw-r--r-- | drivers/net/wireless/b43legacy/phy.c | 68 |
1 files changed, 37 insertions, 31 deletions
diff --git a/drivers/net/wireless/b43legacy/phy.c b/drivers/net/wireless/b43legacy/phy.c index 8e5c09b8187..995c7d0c212 100644 --- a/drivers/net/wireless/b43legacy/phy.c +++ b/drivers/net/wireless/b43legacy/phy.c @@ -4,7 +4,7 @@ Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, Stefano Brivio <stefano.brivio@polimi.it> - Michael Buesch <mbuesch@freenet.de> + Michael Buesch <m@bues.ch> Danny van Dyk <kugelfang@gentoo.org> Andreas Jaggi <andreas.jaggi@waterwave.ch> Copyright (c) 2007 Larry Finger <Larry.Finger@lwfinger.net> @@ -31,6 +31,8 @@ #include <linux/delay.h> #include <linux/pci.h> +#include <linux/sched.h> +#include <linux/slab.h> #include <linux/types.h> #include "b43legacy.h" @@ -103,7 +105,7 @@ void b43legacy_phy_lock(struct b43legacy_wldev *dev) if (dev->dev->id.revision < 3) { b43legacy_mac_suspend(dev); } else { - if (!b43legacy_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) + if (!b43legacy_is_mode(dev->wl, NL80211_IFTYPE_AP)) b43legacy_power_saving_ctl_bits(dev, -1, 1); } } @@ -118,7 +120,7 @@ void b43legacy_phy_unlock(struct b43legacy_wldev *dev) if (dev->dev->id.revision < 3) { b43legacy_mac_enable(dev); } else { - if (!b43legacy_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) + if (!b43legacy_is_mode(dev->wl, NL80211_IFTYPE_AP)) b43legacy_power_saving_ctl_bits(dev, -1, -1); } } @@ -151,7 +153,7 @@ void b43legacy_phy_calibrate(struct b43legacy_wldev *dev) phy->calibrated = 1; } -/* intialize B PHY power control +/* initialize B PHY power control * as described in http://bcm-specs.sipsolutions.net/InitPowerControl */ static void b43legacy_phy_init_pctl(struct b43legacy_wldev *dev) @@ -406,7 +408,7 @@ static void b43legacy_phy_setupg(struct b43legacy_wldev *dev) if (is_bcm_board_vendor(dev) && (dev->dev->bus->boardinfo.type == 0x0416) && - (dev->dev->bus->boardinfo.rev == 0x0017)) + (dev->dev->bus->sprom.board_rev == 0x0017)) return; b43legacy_ilt_write(dev, 0x5001, 0x0002); @@ -422,7 +424,7 @@ static void b43legacy_phy_setupg(struct b43legacy_wldev *dev) if (is_bcm_board_vendor(dev) && (dev->dev->bus->boardinfo.type == 0x0416) && - (dev->dev->bus->boardinfo.rev == 0x0017)) + (dev->dev->bus->sprom.board_rev == 0x0017)) return; b43legacy_ilt_write(dev, 0x0401, 0x0002); @@ -595,12 +597,14 @@ static void b43legacy_phy_initb5(struct b43legacy_wldev *dev) 0x0035) & 0xFFC0) | 0x0064); b43legacy_phy_write(dev, 0x005D, (b43legacy_phy_read(dev, 0x005D) & 0xFF80) | 0x000A); + b43legacy_phy_write(dev, 0x5B, 0x0000); + b43legacy_phy_write(dev, 0x5C, 0x0000); } if (dev->bad_frames_preempt) b43legacy_phy_write(dev, B43legacy_PHY_RADIO_BITFIELD, b43legacy_phy_read(dev, - B43legacy_PHY_RADIO_BITFIELD) | (1 << 11)); + B43legacy_PHY_RADIO_BITFIELD) | (1 << 12)); if (phy->analog == 1) { b43legacy_phy_write(dev, 0x0026, 0xCE00); @@ -753,7 +757,7 @@ static void b43legacy_phy_initb6(struct b43legacy_wldev *dev) b43legacy_radio_write16(dev, 0x0050, 0x0020); } if (phy->radio_rev <= 2) { - b43legacy_radio_write16(dev, 0x007C, 0x0020); + b43legacy_radio_write16(dev, 0x0050, 0x0020); b43legacy_radio_write16(dev, 0x005A, 0x0070); b43legacy_radio_write16(dev, 0x005B, 0x007B); b43legacy_radio_write16(dev, 0x005C, 0x00B0); @@ -771,7 +775,7 @@ static void b43legacy_phy_initb6(struct b43legacy_wldev *dev) b43legacy_phy_write(dev, 0x002A, 0x8AC0); b43legacy_phy_write(dev, 0x0038, 0x0668); b43legacy_radio_set_txpower_bg(dev, 0xFFFF, 0xFFFF, 0xFFFF); - if (phy->radio_rev <= 5) + if (phy->radio_rev == 4 || phy->radio_rev == 5) b43legacy_phy_write(dev, 0x005D, (b43legacy_phy_read(dev, 0x005D) & 0xFF80) | 0x0003); if (phy->radio_rev <= 2) @@ -1010,7 +1014,7 @@ static void b43legacy_phy_initg(struct b43legacy_wldev *dev) b43legacy_phy_initb5(dev); else b43legacy_phy_initb6(dev); - if (phy->rev >= 2 || phy->gmode) + if (phy->rev >= 2 && phy->gmode) b43legacy_phy_inita(dev); if (phy->rev >= 2) { @@ -1025,18 +1029,22 @@ static void b43legacy_phy_initg(struct b43legacy_wldev *dev) b43legacy_phy_write(dev, 0x0811, 0x0400); b43legacy_phy_write(dev, 0x0015, 0x00C0); } - if (phy->rev >= 2 || phy->gmode) { + if (phy->gmode) { tmp = b43legacy_phy_read(dev, 0x0400) & 0xFF; - if (tmp == 3 || tmp == 5) { + if (tmp == 3) { + b43legacy_phy_write(dev, 0x04C2, 0x1816); + b43legacy_phy_write(dev, 0x04C3, 0x8606); + } + if (tmp == 4 || tmp == 5) { b43legacy_phy_write(dev, 0x04C2, 0x1816); b43legacy_phy_write(dev, 0x04C3, 0x8006); - if (tmp == 5) - b43legacy_phy_write(dev, 0x04CC, - (b43legacy_phy_read(dev, - 0x04CC) & 0x00FF) | - 0x1F00); + b43legacy_phy_write(dev, 0x04CC, + (b43legacy_phy_read(dev, + 0x04CC) & 0x00FF) | + 0x1F00); } - b43legacy_phy_write(dev, 0x047E, 0x0078); + if (phy->rev >= 2) + b43legacy_phy_write(dev, 0x047E, 0x0078); } if (phy->radio_rev == 8) { b43legacy_phy_write(dev, 0x0801, b43legacy_phy_read(dev, 0x0801) @@ -1078,7 +1086,7 @@ static void b43legacy_phy_initg(struct b43legacy_wldev *dev) else b43legacy_phy_write(dev, 0x002F, 0x0202); } - if (phy->gmode || phy->rev >= 2) { + if (phy->gmode) { b43legacy_phy_lo_adjust(dev, 0); b43legacy_phy_write(dev, 0x080F, 0x8078); } @@ -1088,7 +1096,7 @@ static void b43legacy_phy_initg(struct b43legacy_wldev *dev) * the value 0x7FFFFFFF here. I think that is some weird * compiler optimization in the original driver. * Essentially, what we do here is resetting all NRSSI LT - * entries to -32 (see the limit_value() in nrssi_hw_update()) + * entries to -32 (see the clamp_val() in nrssi_hw_update()) */ b43legacy_nrssi_hw_update(dev, 0xFFFF); b43legacy_calc_nrssi_threshold(dev); @@ -1290,12 +1298,10 @@ void b43legacy_lo_write(struct b43legacy_wldev *dev, /* Sanity check. */ if (pair->low < -8 || pair->low > 8 || pair->high < -8 || pair->high > 8) { - struct b43legacy_phy *phy = &dev->phy; b43legacydbg(dev->wl, "WARNING: Writing invalid LOpair " - "(low: %d, high: %d, index: %lu)\n", - pair->low, pair->high, - (unsigned long)(pair - phy->_lo_pairs)); + "(low: %d, high: %d)\n", + pair->low, pair->high); dump_stack(); } #endif @@ -1756,7 +1762,7 @@ static s8 b43legacy_phy_estimate_power_out(struct b43legacy_wldev *dev, s8 tssi) switch (phy->type) { case B43legacy_PHYTYPE_B: case B43legacy_PHYTYPE_G: - tmp = limit_value(tmp, 0x00, 0x3F); + tmp = clamp_val(tmp, 0x00, 0x3F); dbm = phy->tssi2dbm[tmp]; break; default: @@ -1854,12 +1860,12 @@ void b43legacy_phy_xmitpower(struct b43legacy_wldev *dev) * which accounts for the factor of 4 */ #define REG_MAX_PWR 20 max_pwr = min(REG_MAX_PWR * 4 - - dev->dev->bus->sprom.antenna_gain.ghz24.a0 + - dev->dev->bus->sprom.antenna_gain.a0 - 0x6, max_pwr); /* find the desired power in Q5.2 - power_level is in dBm * and limit it - max_pwr is already in Q5.2 */ - desired_pwr = limit_value(phy->power_level << 2, 0, max_pwr); + desired_pwr = clamp_val(phy->power_level << 2, 0, max_pwr); if (b43legacy_debug(dev, B43legacy_DBG_XMITPOWER)) b43legacydbg(dev->wl, "Current TX power output: " Q52_FMT " dBm, Desired TX power output: " Q52_FMT @@ -1905,7 +1911,7 @@ void b43legacy_phy_xmitpower(struct b43legacy_wldev *dev) radio_attenuation++; } } - baseband_attenuation = limit_value(baseband_attenuation, 0, 11); + baseband_attenuation = clamp_val(baseband_attenuation, 0, 11); txpower = phy->txctl1; if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 2)) { @@ -1933,8 +1939,8 @@ void b43legacy_phy_xmitpower(struct b43legacy_wldev *dev) } /* Save the control values */ phy->txctl1 = txpower; - baseband_attenuation = limit_value(baseband_attenuation, 0, 11); - radio_attenuation = limit_value(radio_attenuation, 0, 9); + baseband_attenuation = clamp_val(baseband_attenuation, 0, 11); + radio_attenuation = clamp_val(radio_attenuation, 0, 9); phy->rfatt = radio_attenuation; phy->bbatt = baseband_attenuation; @@ -1979,7 +1985,7 @@ s8 b43legacy_tssi2dbm_entry(s8 entry [], u8 index, s16 pab0, s16 pab1, s16 pab2) f = q; i++; } while (delta >= 2); - entry[index] = limit_value(b43legacy_tssi2dbm_ad(m1 * f, 8192), + entry[index] = clamp_val(b43legacy_tssi2dbm_ad(m1 * f, 8192), -127, 128); return 0; } |
