diff options
Diffstat (limited to 'drivers/net/wireless/b43/main.c')
| -rw-r--r-- | drivers/net/wireless/b43/main.c | 4066 |
1 files changed, 2426 insertions, 1640 deletions
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 7205a936ec7..0d6a0bb1f87 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4,9 +4,13 @@ Copyright (c) 2005 Martin Langer <martin-langer@gmx.de> Copyright (c) 2005 Stefano Brivio <stefano.brivio@polimi.it> - Copyright (c) 2005, 2006 Michael Buesch <mb@bu3sch.de> + Copyright (c) 2005-2009 Michael Buesch <m@bues.ch> Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org> Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch> + Copyright (c) 2010-2011 Rafał Miłecki <zajec5@gmail.com> + + SDIO support + Copyright (c) 2009 Albert Herranz <albert_herranz@yahoo.es> Some parts of the code in this file are derived from the ipw2200 driver Copyright(c) 2003 - 2004 Intel Corporation. @@ -30,37 +34,47 @@ #include <linux/delay.h> #include <linux/init.h> -#include <linux/moduleparam.h> +#include <linux/module.h> #include <linux/if_arp.h> #include <linux/etherdevice.h> #include <linux/firmware.h> -#include <linux/wireless.h> #include <linux/workqueue.h> #include <linux/skbuff.h> #include <linux/io.h> #include <linux/dma-mapping.h> +#include <linux/slab.h> #include <asm/unaligned.h> #include "b43.h" #include "main.h" #include "debugfs.h" -#include "phy.h" -#include "nphy.h" +#include "phy_common.h" +#include "phy_g.h" +#include "phy_n.h" #include "dma.h" #include "pio.h" #include "sysfs.h" #include "xmit.h" #include "lo.h" #include "pcmcia.h" +#include "sdio.h" +#include <linux/mmc/sdio_func.h> MODULE_DESCRIPTION("Broadcom B43 wireless driver"); MODULE_AUTHOR("Martin Langer"); MODULE_AUTHOR("Stefano Brivio"); MODULE_AUTHOR("Michael Buesch"); +MODULE_AUTHOR("Gábor Stefanik"); +MODULE_AUTHOR("Rafał Miłecki"); MODULE_LICENSE("GPL"); -MODULE_FIRMWARE(B43_SUPPORTED_FIRMWARE_ID); - +MODULE_FIRMWARE("b43/ucode11.fw"); +MODULE_FIRMWARE("b43/ucode13.fw"); +MODULE_FIRMWARE("b43/ucode14.fw"); +MODULE_FIRMWARE("b43/ucode15.fw"); +MODULE_FIRMWARE("b43/ucode16_mimo.fw"); +MODULE_FIRMWARE("b43/ucode5.fw"); +MODULE_FIRMWARE("b43/ucode9.fw"); static int modparam_bad_frames_preempt; module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444); @@ -79,15 +93,42 @@ static int modparam_nohwcrypt; module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444); MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); -int b43_modparam_qos = 1; -module_param_named(qos, b43_modparam_qos, int, 0444); +static int modparam_hwtkip; +module_param_named(hwtkip, modparam_hwtkip, int, 0444); +MODULE_PARM_DESC(hwtkip, "Enable hardware tkip."); + +static int modparam_qos = 1; +module_param_named(qos, modparam_qos, int, 0444); MODULE_PARM_DESC(qos, "Enable QOS support (default on)"); static int modparam_btcoex = 1; module_param_named(btcoex, modparam_btcoex, int, 0444); -MODULE_PARM_DESC(btcoex, "Enable Bluetooth coexistance (default on)"); - +MODULE_PARM_DESC(btcoex, "Enable Bluetooth coexistence (default on)"); + +int b43_modparam_verbose = B43_VERBOSITY_DEFAULT; +module_param_named(verbose, b43_modparam_verbose, int, 0644); +MODULE_PARM_DESC(verbose, "Log message verbosity: 0=error, 1=warn, 2=info(default), 3=debug"); + +static int b43_modparam_pio = 0; +module_param_named(pio, b43_modparam_pio, int, 0644); +MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO"); + +static int modparam_allhwsupport = !IS_ENABLED(CONFIG_BRCMSMAC); +module_param_named(allhwsupport, modparam_allhwsupport, int, 0444); +MODULE_PARM_DESC(allhwsupport, "Enable support for all hardware (even it if overlaps with the brcmsmac driver)"); + +#ifdef CONFIG_B43_BCMA +static const struct bcma_device_id b43_bcma_tbl[] = { + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x11, BCMA_ANY_CLASS), + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x17, BCMA_ANY_CLASS), + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x18, BCMA_ANY_CLASS), + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1D, BCMA_ANY_CLASS), + BCMA_CORETABLE_END +}; +MODULE_DEVICE_TABLE(bcma, b43_bcma_tbl); +#endif +#ifdef CONFIG_B43_SSB static const struct ssb_device_id b43_ssb_tbl[] = { SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 6), @@ -95,11 +136,14 @@ static const struct ssb_device_id b43_ssb_tbl[] = { SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 9), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 10), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 11), + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 12), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 13), + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 15), + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 16), SSB_DEVTABLE_END }; - MODULE_DEVICE_TABLE(ssb, b43_ssb_tbl); +#endif /* Channel and ratetables are shared for all devices. * They can't be const, because ieee80211 puts some precalculated @@ -138,7 +182,7 @@ static struct ieee80211_rate __b43_ratetable[] = { #define b43_g_ratetable (__b43_ratetable + 0) #define b43_g_ratetable_size 12 -#define CHAN4G(_channel, _freq, _flags) { \ +#define CHAN2G(_channel, _freq, _flags) { \ .band = IEEE80211_BAND_2GHZ, \ .center_freq = (_freq), \ .hw_value = (_channel), \ @@ -147,23 +191,31 @@ static struct ieee80211_rate __b43_ratetable[] = { .max_power = 30, \ } static struct ieee80211_channel b43_2ghz_chantable[] = { - CHAN4G(1, 2412, 0), - CHAN4G(2, 2417, 0), - CHAN4G(3, 2422, 0), - CHAN4G(4, 2427, 0), - CHAN4G(5, 2432, 0), - CHAN4G(6, 2437, 0), - CHAN4G(7, 2442, 0), - CHAN4G(8, 2447, 0), - CHAN4G(9, 2452, 0), - CHAN4G(10, 2457, 0), - CHAN4G(11, 2462, 0), - CHAN4G(12, 2467, 0), - CHAN4G(13, 2472, 0), - CHAN4G(14, 2484, 0), + CHAN2G(1, 2412, 0), + CHAN2G(2, 2417, 0), + CHAN2G(3, 2422, 0), + CHAN2G(4, 2427, 0), + CHAN2G(5, 2432, 0), + CHAN2G(6, 2437, 0), + CHAN2G(7, 2442, 0), + CHAN2G(8, 2447, 0), + CHAN2G(9, 2452, 0), + CHAN2G(10, 2457, 0), + CHAN2G(11, 2462, 0), + CHAN2G(12, 2467, 0), + CHAN2G(13, 2472, 0), + CHAN2G(14, 2484, 0), }; -#undef CHAN4G +#undef CHAN2G +#define CHAN4G(_channel, _flags) { \ + .band = IEEE80211_BAND_5GHZ, \ + .center_freq = 4000 + (5 * (_channel)), \ + .hw_value = (_channel), \ + .flags = (_flags), \ + .max_antenna_gain = 0, \ + .max_power = 30, \ +} #define CHAN5G(_channel, _flags) { \ .band = IEEE80211_BAND_5GHZ, \ .center_freq = 5000 + (5 * (_channel)), \ @@ -173,6 +225,18 @@ static struct ieee80211_channel b43_2ghz_chantable[] = { .max_power = 30, \ } static struct ieee80211_channel b43_5ghz_nphy_chantable[] = { + CHAN4G(184, 0), CHAN4G(186, 0), + CHAN4G(188, 0), CHAN4G(190, 0), + CHAN4G(192, 0), CHAN4G(194, 0), + CHAN4G(196, 0), CHAN4G(198, 0), + CHAN4G(200, 0), CHAN4G(202, 0), + CHAN4G(204, 0), CHAN4G(206, 0), + CHAN4G(208, 0), CHAN4G(210, 0), + CHAN4G(212, 0), CHAN4G(214, 0), + CHAN4G(216, 0), CHAN4G(218, 0), + CHAN4G(220, 0), CHAN4G(222, 0), + CHAN4G(224, 0), CHAN4G(226, 0), + CHAN4G(228, 0), CHAN5G(32, 0), CHAN5G(34, 0), CHAN5G(36, 0), CHAN5G(38, 0), CHAN5G(40, 0), CHAN5G(42, 0), @@ -216,18 +280,7 @@ static struct ieee80211_channel b43_5ghz_nphy_chantable[] = { CHAN5G(170, 0), CHAN5G(172, 0), CHAN5G(174, 0), CHAN5G(176, 0), CHAN5G(178, 0), CHAN5G(180, 0), - CHAN5G(182, 0), CHAN5G(184, 0), - CHAN5G(186, 0), CHAN5G(188, 0), - CHAN5G(190, 0), CHAN5G(192, 0), - CHAN5G(194, 0), CHAN5G(196, 0), - CHAN5G(198, 0), CHAN5G(200, 0), - CHAN5G(202, 0), CHAN5G(204, 0), - CHAN5G(206, 0), CHAN5G(208, 0), - CHAN5G(210, 0), CHAN5G(212, 0), - CHAN5G(214, 0), CHAN5G(216, 0), - CHAN5G(218, 0), CHAN5G(220, 0), - CHAN5G(222, 0), CHAN5G(224, 0), - CHAN5G(226, 0), CHAN5G(228, 0), + CHAN5G(182, 0), }; static struct ieee80211_channel b43_5ghz_aphy_chantable[] = { @@ -251,6 +304,7 @@ static struct ieee80211_channel b43_5ghz_aphy_chantable[] = { CHAN5G(208, 0), CHAN5G(212, 0), CHAN5G(216, 0), }; +#undef CHAN4G #undef CHAN5G static struct ieee80211_supported_band b43_band_5GHz_nphy = { @@ -279,8 +333,12 @@ static struct ieee80211_supported_band b43_band_2GHz = { static void b43_wireless_core_exit(struct b43_wldev *dev); static int b43_wireless_core_init(struct b43_wldev *dev); -static void b43_wireless_core_stop(struct b43_wldev *dev); +static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev); static int b43_wireless_core_start(struct b43_wldev *dev); +static void b43_op_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *conf, + u32 changed); static int b43_ratelimit(struct b43_wl *wl) { @@ -295,55 +353,85 @@ static int b43_ratelimit(struct b43_wl *wl) void b43info(struct b43_wl *wl, const char *fmt, ...) { + struct va_format vaf; va_list args; + if (b43_modparam_verbose < B43_VERBOSITY_INFO) + return; if (!b43_ratelimit(wl)) return; + va_start(args, fmt); - printk(KERN_INFO "b43-%s: ", - (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); - vprintk(fmt, args); + + vaf.fmt = fmt; + vaf.va = &args; + + printk(KERN_INFO "b43-%s: %pV", + (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf); + va_end(args); } void b43err(struct b43_wl *wl, const char *fmt, ...) { + struct va_format vaf; va_list args; + if (b43_modparam_verbose < B43_VERBOSITY_ERROR) + return; if (!b43_ratelimit(wl)) return; + va_start(args, fmt); - printk(KERN_ERR "b43-%s ERROR: ", - (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); - vprintk(fmt, args); + + vaf.fmt = fmt; + vaf.va = &args; + + printk(KERN_ERR "b43-%s ERROR: %pV", + (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf); + va_end(args); } void b43warn(struct b43_wl *wl, const char *fmt, ...) { + struct va_format vaf; va_list args; + if (b43_modparam_verbose < B43_VERBOSITY_WARN) + return; if (!b43_ratelimit(wl)) return; + va_start(args, fmt); - printk(KERN_WARNING "b43-%s warning: ", - (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); - vprintk(fmt, args); + + vaf.fmt = fmt; + vaf.va = &args; + + printk(KERN_WARNING "b43-%s warning: %pV", + (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf); + va_end(args); } -#if B43_DEBUG void b43dbg(struct b43_wl *wl, const char *fmt, ...) { + struct va_format vaf; va_list args; + if (b43_modparam_verbose < B43_VERBOSITY_DEBUG) + return; + va_start(args, fmt); - printk(KERN_DEBUG "b43-%s debug: ", - (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); - vprintk(fmt, args); + + vaf.fmt = fmt; + vaf.va = &args; + + printk(KERN_DEBUG "b43-%s debug: %pV", + (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf); + va_end(args); } -#endif /* DEBUG */ static void b43_ram_write(struct b43_wldev *dev, u16 offset, u32 val) { @@ -372,7 +460,7 @@ static inline void b43_shm_control_word(struct b43_wldev *dev, b43_write32(dev, B43_MMIO_SHM_CONTROL, control); } -u32 __b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) +u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) { u32 ret; @@ -382,9 +470,8 @@ u32 __b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) /* Unaligned access */ b43_shm_control_word(dev, routing, offset >> 2); ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED); - ret <<= 16; b43_shm_control_word(dev, routing, (offset >> 2) + 1); - ret |= b43_read16(dev, B43_MMIO_SHM_DATA); + ret |= ((u32)b43_read16(dev, B43_MMIO_SHM_DATA)) << 16; goto out; } @@ -396,20 +483,7 @@ out: return ret; } -u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) -{ - struct b43_wl *wl = dev->wl; - unsigned long flags; - u32 ret; - - spin_lock_irqsave(&wl->shm_lock, flags); - ret = __b43_shm_read32(dev, routing, offset); - spin_unlock_irqrestore(&wl->shm_lock, flags); - - return ret; -} - -u16 __b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset) +u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset) { u16 ret; @@ -430,20 +504,7 @@ out: return ret; } -u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset) -{ - struct b43_wl *wl = dev->wl; - unsigned long flags; - u16 ret; - - spin_lock_irqsave(&wl->shm_lock, flags); - ret = __b43_shm_read16(dev, routing, offset); - spin_unlock_irqrestore(&wl->shm_lock, flags); - - return ret; -} - -void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) +void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) { if (routing == B43_SHM_SHARED) { B43_WARN_ON(offset & 0x0001); @@ -451,9 +512,10 @@ void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value /* Unaligned access */ b43_shm_control_word(dev, routing, offset >> 2); b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, - (value >> 16) & 0xffff); + value & 0xFFFF); b43_shm_control_word(dev, routing, (offset >> 2) + 1); - b43_write16(dev, B43_MMIO_SHM_DATA, value & 0xffff); + b43_write16(dev, B43_MMIO_SHM_DATA, + (value >> 16) & 0xFFFF); return; } offset >>= 2; @@ -462,17 +524,7 @@ void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value b43_write32(dev, B43_MMIO_SHM_DATA, value); } -void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) -{ - struct b43_wl *wl = dev->wl; - unsigned long flags; - - spin_lock_irqsave(&wl->shm_lock, flags); - __b43_shm_write32(dev, routing, offset, value); - spin_unlock_irqrestore(&wl->shm_lock, flags); -} - -void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value) +void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value) { if (routing == B43_SHM_SHARED) { B43_WARN_ON(offset & 0x0001); @@ -488,26 +540,16 @@ void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value b43_write16(dev, B43_MMIO_SHM_DATA, value); } -void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value) -{ - struct b43_wl *wl = dev->wl; - unsigned long flags; - - spin_lock_irqsave(&wl->shm_lock, flags); - __b43_shm_write16(dev, routing, offset, value); - spin_unlock_irqrestore(&wl->shm_lock, flags); -} - /* Read HostFlags */ -u64 b43_hf_read(struct b43_wldev * dev) +u64 b43_hf_read(struct b43_wldev *dev) { u64 ret; - ret = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI); + ret = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF3); ret <<= 16; - ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI); + ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF2); ret <<= 16; - ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO); + ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF1); return ret; } @@ -520,112 +562,62 @@ void b43_hf_write(struct b43_wldev *dev, u64 value) lo = (value & 0x00000000FFFFULL); mi = (value & 0x0000FFFF0000ULL) >> 16; hi = (value & 0xFFFF00000000ULL) >> 32; - b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO, lo); - b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI, mi); - b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi); + b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF1, lo); + b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF2, mi); + b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF3, hi); } -void b43_tsf_read(struct b43_wldev *dev, u64 * tsf) +/* Read the firmware capabilities bitmask (Opensource firmware only) */ +static u16 b43_fwcapa_read(struct b43_wldev *dev) { - /* We need to be careful. As we read the TSF from multiple - * registers, we should take care of register overflows. - * In theory, the whole tsf read process should be atomic. - * We try to be atomic here, by restaring the read process, - * if any of the high registers changed (overflew). - */ - if (dev->dev->id.revision >= 3) { - u32 low, high, high2; - - do { - high = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH); - low = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_LOW); - high2 = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH); - } while (unlikely(high != high2)); - - *tsf = high; - *tsf <<= 32; - *tsf |= low; - } else { - u64 tmp; - u16 v0, v1, v2, v3; - u16 test1, test2, test3; + B43_WARN_ON(!dev->fw.opensource); + return b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_FWCAPA); +} - do { - v3 = b43_read16(dev, B43_MMIO_TSF_3); - v2 = b43_read16(dev, B43_MMIO_TSF_2); - v1 = b43_read16(dev, B43_MMIO_TSF_1); - v0 = b43_read16(dev, B43_MMIO_TSF_0); +void b43_tsf_read(struct b43_wldev *dev, u64 *tsf) +{ + u32 low, high; - test3 = b43_read16(dev, B43_MMIO_TSF_3); - test2 = b43_read16(dev, B43_MMIO_TSF_2); - test1 = b43_read16(dev, B43_MMIO_TSF_1); - } while (v3 != test3 || v2 != test2 || v1 != test1); + B43_WARN_ON(dev->dev->core_rev < 3); - *tsf = v3; - *tsf <<= 48; - tmp = v2; - tmp <<= 32; - *tsf |= tmp; - tmp = v1; - tmp <<= 16; - *tsf |= tmp; - *tsf |= v0; - } + /* The hardware guarantees us an atomic read, if we + * read the low register first. */ + low = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_LOW); + high = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH); + + *tsf = high; + *tsf <<= 32; + *tsf |= low; } static void b43_time_lock(struct b43_wldev *dev) { - u32 macctl; - - macctl = b43_read32(dev, B43_MMIO_MACCTL); - macctl |= B43_MACCTL_TBTTHOLD; - b43_write32(dev, B43_MMIO_MACCTL, macctl); + b43_maskset32(dev, B43_MMIO_MACCTL, ~0, B43_MACCTL_TBTTHOLD); /* Commit the write */ b43_read32(dev, B43_MMIO_MACCTL); } static void b43_time_unlock(struct b43_wldev *dev) { - u32 macctl; - - macctl = b43_read32(dev, B43_MMIO_MACCTL); - macctl &= ~B43_MACCTL_TBTTHOLD; - b43_write32(dev, B43_MMIO_MACCTL, macctl); + b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_TBTTHOLD, 0); /* Commit the write */ b43_read32(dev, B43_MMIO_MACCTL); } static void b43_tsf_write_locked(struct b43_wldev *dev, u64 tsf) { - /* Be careful with the in-progress timer. - * First zero out the low register, so we have a full - * register-overflow duration to complete the operation. - */ - if (dev->dev->id.revision >= 3) { - u32 lo = (tsf & 0x00000000FFFFFFFFULL); - u32 hi = (tsf & 0xFFFFFFFF00000000ULL) >> 32; - - b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, 0); - mmiowb(); - b43_write32(dev, B43_MMIO_REV3PLUS_TSF_HIGH, hi); - mmiowb(); - b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, lo); - } else { - u16 v0 = (tsf & 0x000000000000FFFFULL); - u16 v1 = (tsf & 0x00000000FFFF0000ULL) >> 16; - u16 v2 = (tsf & 0x0000FFFF00000000ULL) >> 32; - u16 v3 = (tsf & 0xFFFF000000000000ULL) >> 48; + u32 low, high; - b43_write16(dev, B43_MMIO_TSF_0, 0); - mmiowb(); - b43_write16(dev, B43_MMIO_TSF_3, v3); - mmiowb(); - b43_write16(dev, B43_MMIO_TSF_2, v2); - mmiowb(); - b43_write16(dev, B43_MMIO_TSF_1, v1); - mmiowb(); - b43_write16(dev, B43_MMIO_TSF_0, v0); - } + B43_WARN_ON(dev->dev->core_rev < 3); + + low = tsf; + high = (tsf >> 32); + /* The hardware guarantees us an atomic write, if we + * write the low register first. */ + b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, low); + mmiowb(); + b43_write32(dev, B43_MMIO_REV3PLUS_TSF_HIGH, high); + mmiowb(); } void b43_tsf_write(struct b43_wldev *dev, u64 tsf) @@ -636,7 +628,7 @@ void b43_tsf_write(struct b43_wldev *dev, u64 tsf) } static -void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 * mac) +void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 *mac) { static const u8 zero_addr[ETH_ALEN] = { 0 }; u16 data; @@ -693,66 +685,34 @@ static void b43_upload_card_macaddress(struct b43_wldev *dev) static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time) { /* slot_time is in usec. */ - if (dev->phy.type != B43_PHYTYPE_G) + /* This test used to exit for all but a G PHY. */ + if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) return; - b43_write16(dev, 0x684, 510 + slot_time); - b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time); + b43_write16(dev, B43_MMIO_IFSSLOT, 510 + slot_time); + /* Shared memory location 0x0010 is the slot time and should be + * set to slot_time; however, this register is initially 0 and changing + * the value adversely affects the transmit rate for BCM4311 + * devices. Until this behavior is unterstood, delete this step + * + * b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time); + */ } static void b43_short_slot_timing_enable(struct b43_wldev *dev) { b43_set_slot_time(dev, 9); - dev->short_slot = 1; } static void b43_short_slot_timing_disable(struct b43_wldev *dev) { b43_set_slot_time(dev, 20); - dev->short_slot = 0; -} - -/* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable. - * Returns the _previously_ enabled IRQ mask. - */ -static inline u32 b43_interrupt_enable(struct b43_wldev *dev, u32 mask) -{ - u32 old_mask; - - old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); - b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask | mask); - - return old_mask; -} - -/* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable. - * Returns the _previously_ enabled IRQ mask. - */ -static inline u32 b43_interrupt_disable(struct b43_wldev *dev, u32 mask) -{ - u32 old_mask; - - old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); - b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask & ~mask); - - return old_mask; -} - -/* Synchronize IRQ top- and bottom-half. - * IRQs must be masked before calling this. - * This must not be called with the irq_lock held. - */ -static void b43_synchronize_irq(struct b43_wldev *dev) -{ - synchronize_irq(dev->dev->irq); - tasklet_kill(&dev->isr_tasklet); } /* DummyTransmission function, as documented on - * http://bcm-specs.sipsolutions.net/DummyTransmission + * http://bcm-v4.sipsolutions.net/802.11/DummyTransmission */ -void b43_dummy_transmission(struct b43_wldev *dev) +void b43_dummy_transmission(struct b43_wldev *dev, bool ofdm, bool pa_on) { - struct b43_wl *wl = dev->wl; struct b43_phy *phy = &dev->phy; unsigned int i, max_loop; u16 value; @@ -764,71 +724,80 @@ void b43_dummy_transmission(struct b43_wldev *dev) 0x00000000, }; - switch (phy->type) { - case B43_PHYTYPE_A: + if (ofdm) { max_loop = 0x1E; buffer[0] = 0x000201CC; - break; - case B43_PHYTYPE_B: - case B43_PHYTYPE_G: + } else { max_loop = 0xFA; buffer[0] = 0x000B846E; - break; - default: - B43_WARN_ON(1); - return; } - spin_lock_irq(&wl->irq_lock); - write_lock(&wl->tx_lock); - for (i = 0; i < 5; i++) b43_ram_write(dev, i * 4, buffer[i]); - /* Commit writes */ - b43_read32(dev, B43_MMIO_MACCTL); + b43_write16(dev, B43_MMIO_XMTSEL, 0x0000); + + if (dev->dev->core_rev < 11) + b43_write16(dev, B43_MMIO_WEPCTL, 0x0000); + else + b43_write16(dev, B43_MMIO_WEPCTL, 0x0100); + + value = (ofdm ? 0x41 : 0x40); + b43_write16(dev, B43_MMIO_TXE0_PHYCTL, value); + if (phy->type == B43_PHYTYPE_N || phy->type == B43_PHYTYPE_LP || + phy->type == B43_PHYTYPE_LCN) + b43_write16(dev, B43_MMIO_TXE0_PHYCTL1, 0x1A02); + + b43_write16(dev, B43_MMIO_TXE0_WM_0, 0x0000); + b43_write16(dev, B43_MMIO_TXE0_WM_1, 0x0000); - b43_write16(dev, 0x0568, 0x0000); - b43_write16(dev, 0x07C0, 0x0000); - value = ((phy->type == B43_PHYTYPE_A) ? 1 : 0); - b43_write16(dev, 0x050C, value); - b43_write16(dev, 0x0508, 0x0000); - b43_write16(dev, 0x050A, 0x0000); - b43_write16(dev, 0x054C, 0x0000); - b43_write16(dev, 0x056A, 0x0014); - b43_write16(dev, 0x0568, 0x0826); - b43_write16(dev, 0x0500, 0x0000); - b43_write16(dev, 0x0502, 0x0030); + b43_write16(dev, B43_MMIO_XMTTPLATETXPTR, 0x0000); + b43_write16(dev, B43_MMIO_XMTTXCNT, 0x0014); + b43_write16(dev, B43_MMIO_XMTSEL, 0x0826); + b43_write16(dev, B43_MMIO_TXE0_CTL, 0x0000); + + if (!pa_on && phy->type == B43_PHYTYPE_N) + ; /*b43_nphy_pa_override(dev, false) */ + + switch (phy->type) { + case B43_PHYTYPE_N: + case B43_PHYTYPE_LCN: + b43_write16(dev, B43_MMIO_TXE0_AUX, 0x00D0); + break; + case B43_PHYTYPE_LP: + b43_write16(dev, B43_MMIO_TXE0_AUX, 0x0050); + break; + default: + b43_write16(dev, B43_MMIO_TXE0_AUX, 0x0030); + } + b43_read16(dev, B43_MMIO_TXE0_AUX); if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5) b43_radio_write16(dev, 0x0051, 0x0017); for (i = 0x00; i < max_loop; i++) { - value = b43_read16(dev, 0x050E); + value = b43_read16(dev, B43_MMIO_TXE0_STATUS); if (value & 0x0080) break; udelay(10); } for (i = 0x00; i < 0x0A; i++) { - value = b43_read16(dev, 0x050E); + value = b43_read16(dev, B43_MMIO_TXE0_STATUS); if (value & 0x0400) break; udelay(10); } - for (i = 0x00; i < 0x0A; i++) { - value = b43_read16(dev, 0x0690); + for (i = 0x00; i < 0x19; i++) { + value = b43_read16(dev, B43_MMIO_IFSSTAT); if (!(value & 0x0100)) break; udelay(10); } if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5) b43_radio_write16(dev, 0x0051, 0x0037); - - write_unlock(&wl->tx_lock); - spin_unlock_irq(&wl->irq_lock); } static void key_write(struct b43_wldev *dev, - u8 index, u8 algorithm, const u8 * key) + u8 index, u8 algorithm, const u8 *key) { unsigned int i; u32 offset; @@ -850,21 +819,22 @@ static void key_write(struct b43_wldev *dev, } } -static void keymac_write(struct b43_wldev *dev, u8 index, const u8 * addr) +static void keymac_write(struct b43_wldev *dev, u8 index, const u8 *addr) { u32 addrtmp[2] = { 0, 0, }; - u8 per_sta_keys_start = 8; + u8 pairwise_keys_start = B43_NR_GROUP_KEYS * 2; if (b43_new_kidx_api(dev)) - per_sta_keys_start = 4; + pairwise_keys_start = B43_NR_GROUP_KEYS; - B43_WARN_ON(index < per_sta_keys_start); - /* We have two default TX keys and possibly two default RX keys. + B43_WARN_ON(index < pairwise_keys_start); + /* We have four default TX keys and possibly four default RX keys. * Physical mac 0 is mapped to physical key 4 or 8, depending * on the firmware version. * So we must adjust the index here. */ - index -= per_sta_keys_start; + index -= pairwise_keys_start; + B43_WARN_ON(index >= B43_NR_PAIRWISE_KEYS); if (addr) { addrtmp[0] = addr[0]; @@ -875,48 +845,126 @@ static void keymac_write(struct b43_wldev *dev, u8 index, const u8 * addr) addrtmp[1] |= ((u32) (addr[5]) << 8); } - if (dev->dev->id.revision >= 5) { - /* Receive match transmitter address mechanism */ - b43_shm_write32(dev, B43_SHM_RCMTA, - (index * 2) + 0, addrtmp[0]); - b43_shm_write16(dev, B43_SHM_RCMTA, - (index * 2) + 1, addrtmp[1]); - } else { - /* RXE (Receive Engine) and - * PSM (Programmable State Machine) mechanism - */ - if (index < 8) { - /* TODO write to RCM 16, 19, 22 and 25 */ - } else { - b43_shm_write32(dev, B43_SHM_SHARED, - B43_SHM_SH_PSM + (index * 6) + 0, - addrtmp[0]); - b43_shm_write16(dev, B43_SHM_SHARED, - B43_SHM_SH_PSM + (index * 6) + 4, - addrtmp[1]); - } + /* Receive match transmitter address (RCMTA) mechanism */ + b43_shm_write32(dev, B43_SHM_RCMTA, + (index * 2) + 0, addrtmp[0]); + b43_shm_write16(dev, B43_SHM_RCMTA, + (index * 2) + 1, addrtmp[1]); +} + +/* The ucode will use phase1 key with TEK key to decrypt rx packets. + * When a packet is received, the iv32 is checked. + * - if it doesn't the packet is returned without modification (and software + * decryption can be done). That's what happen when iv16 wrap. + * - if it does, the rc4 key is computed, and decryption is tried. + * Either it will success and B43_RX_MAC_DEC is returned, + * either it fails and B43_RX_MAC_DEC|B43_RX_MAC_DECERR is returned + * and the packet is not usable (it got modified by the ucode). + * So in order to never have B43_RX_MAC_DECERR, we should provide + * a iv32 and phase1key that match. Because we drop packets in case of + * B43_RX_MAC_DECERR, if we have a correct iv32 but a wrong phase1key, all + * packets will be lost without higher layer knowing (ie no resync possible + * until next wrap). + * + * NOTE : this should support 50 key like RCMTA because + * (B43_SHM_SH_KEYIDXBLOCK - B43_SHM_SH_TKIPTSCTTAK)/14 = 50 + */ +static void rx_tkip_phase1_write(struct b43_wldev *dev, u8 index, u32 iv32, + u16 *phase1key) +{ + unsigned int i; + u32 offset; + u8 pairwise_keys_start = B43_NR_GROUP_KEYS * 2; + + if (!modparam_hwtkip) + return; + + if (b43_new_kidx_api(dev)) + pairwise_keys_start = B43_NR_GROUP_KEYS; + + B43_WARN_ON(index < pairwise_keys_start); + /* We have four default TX keys and possibly four default RX keys. + * Physical mac 0 is mapped to physical key 4 or 8, depending + * on the firmware version. + * So we must adjust the index here. + */ + index -= pairwise_keys_start; + B43_WARN_ON(index >= B43_NR_PAIRWISE_KEYS); + + if (b43_debug(dev, B43_DBG_KEYS)) { + b43dbg(dev->wl, "rx_tkip_phase1_write : idx 0x%x, iv32 0x%x\n", + index, iv32); + } + /* Write the key to the RX tkip shared mem */ + offset = B43_SHM_SH_TKIPTSCTTAK + index * (10 + 4); + for (i = 0; i < 10; i += 2) { + b43_shm_write16(dev, B43_SHM_SHARED, offset + i, + phase1key ? phase1key[i / 2] : 0); } + b43_shm_write16(dev, B43_SHM_SHARED, offset + i, iv32); + b43_shm_write16(dev, B43_SHM_SHARED, offset + i + 2, iv32 >> 16); +} + +static void b43_op_update_tkip_key(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_key_conf *keyconf, + struct ieee80211_sta *sta, + u32 iv32, u16 *phase1key) +{ + struct b43_wl *wl = hw_to_b43_wl(hw); + struct b43_wldev *dev; + int index = keyconf->hw_key_idx; + + if (B43_WARN_ON(!modparam_hwtkip)) + return; + + /* This is only called from the RX path through mac80211, where + * our mutex is already locked. */ + B43_WARN_ON(!mutex_is_locked(&wl->mutex)); + dev = wl->current_dev; + B43_WARN_ON(!dev || b43_status(dev) < B43_STAT_INITIALIZED); + + keymac_write(dev, index, NULL); /* First zero out mac to avoid race */ + + rx_tkip_phase1_write(dev, index, iv32, phase1key); + /* only pairwise TKIP keys are supported right now */ + if (WARN_ON(!sta)) + return; + keymac_write(dev, index, sta->addr); } static void do_key_write(struct b43_wldev *dev, u8 index, u8 algorithm, - const u8 * key, size_t key_len, const u8 * mac_addr) + const u8 *key, size_t key_len, const u8 *mac_addr) { u8 buf[B43_SEC_KEYSIZE] = { 0, }; - u8 per_sta_keys_start = 8; + u8 pairwise_keys_start = B43_NR_GROUP_KEYS * 2; if (b43_new_kidx_api(dev)) - per_sta_keys_start = 4; + pairwise_keys_start = B43_NR_GROUP_KEYS; - B43_WARN_ON(index >= dev->max_nr_keys); + B43_WARN_ON(index >= ARRAY_SIZE(dev->key)); B43_WARN_ON(key_len > B43_SEC_KEYSIZE); - if (index >= per_sta_keys_start) + if (index >= pairwise_keys_start) keymac_write(dev, index, NULL); /* First zero out mac. */ + if (algorithm == B43_SEC_ALGO_TKIP) { + /* + * We should provide an initial iv32, phase1key pair. + * We could start with iv32=0 and compute the corresponding + * phase1key, but this means calling ieee80211_get_tkip_key + * with a fake skb (or export other tkip function). + * Because we are lazy we hope iv32 won't start with + * 0xffffffff and let's b43_op_update_tkip_key provide a + * correct pair. + */ + rx_tkip_phase1_write(dev, index, 0xffffffff, (u16*)buf); + } else if (index >= pairwise_keys_start) /* clear it */ + rx_tkip_phase1_write(dev, index, 0, NULL); if (key) memcpy(buf, key, key_len); key_write(dev, index, algorithm, buf); - if (index >= per_sta_keys_start) + if (index >= pairwise_keys_start) keymac_write(dev, index, mac_addr); dev->key[index].algorithm = algorithm; @@ -924,27 +972,38 @@ static void do_key_write(struct b43_wldev *dev, static int b43_key_write(struct b43_wldev *dev, int index, u8 algorithm, - const u8 * key, size_t key_len, - const u8 * mac_addr, + const u8 *key, size_t key_len, + const u8 *mac_addr, struct ieee80211_key_conf *keyconf) { int i; - int sta_keys_start; - + int pairwise_keys_start; + + /* For ALG_TKIP the key is encoded as a 256-bit (32 byte) data block: + * - Temporal Encryption Key (128 bits) + * - Temporal Authenticator Tx MIC Key (64 bits) + * - Temporal Authenticator Rx MIC Key (64 bits) + * + * Hardware only store TEK + */ + if (algorithm == B43_SEC_ALGO_TKIP && key_len == 32) + key_len = 16; if (key_len > B43_SEC_KEYSIZE) return -EINVAL; - for (i = 0; i < dev->max_nr_keys; i++) { + for (i = 0; i < ARRAY_SIZE(dev->key); i++) { /* Check that we don't already have this key. */ B43_WARN_ON(dev->key[i].keyconf == keyconf); } if (index < 0) { - /* Either pairwise key or address is 00:00:00:00:00:00 - * for transmit-only keys. Search the index. */ + /* Pairwise key. Get an empty slot for the key. */ if (b43_new_kidx_api(dev)) - sta_keys_start = 4; + pairwise_keys_start = B43_NR_GROUP_KEYS; else - sta_keys_start = 8; - for (i = sta_keys_start; i < dev->max_nr_keys; i++) { + pairwise_keys_start = B43_NR_GROUP_KEYS * 2; + for (i = pairwise_keys_start; + i < pairwise_keys_start + B43_NR_PAIRWISE_KEYS; + i++) { + B43_WARN_ON(i >= ARRAY_SIZE(dev->key)); if (!dev->key[i].keyconf) { /* found empty */ index = i; @@ -952,7 +1011,7 @@ static int b43_key_write(struct b43_wldev *dev, } } if (index < 0) { - b43err(dev->wl, "Out of hardware key memory\n"); + b43warn(dev->wl, "Out of hardware key memory\n"); return -ENOSPC; } } else @@ -972,7 +1031,7 @@ static int b43_key_write(struct b43_wldev *dev, static int b43_key_clear(struct b43_wldev *dev, int index) { - if (B43_WARN_ON((index < 0) || (index >= dev->max_nr_keys))) + if (B43_WARN_ON((index < 0) || (index >= ARRAY_SIZE(dev->key)))) return -EINVAL; do_key_write(dev, index, B43_SEC_ALGO_NONE, NULL, B43_SEC_KEYSIZE, NULL); @@ -987,12 +1046,75 @@ static int b43_key_clear(struct b43_wldev *dev, int index) static void b43_clear_keys(struct b43_wldev *dev) { - int i; + int i, count; - for (i = 0; i < dev->max_nr_keys; i++) + if (b43_new_kidx_api(dev)) + count = B43_NR_GROUP_KEYS + B43_NR_PAIRWISE_KEYS; + else + count = B43_NR_GROUP_KEYS * 2 + B43_NR_PAIRWISE_KEYS; + for (i = 0; i < count; i++) b43_key_clear(dev, i); } +static void b43_dump_keymemory(struct b43_wldev *dev) +{ + unsigned int i, index, count, offset, pairwise_keys_start; + u8 mac[ETH_ALEN]; + u16 algo; + u32 rcmta0; + u16 rcmta1; + u64 hf; + struct b43_key *key; + + if (!b43_debug(dev, B43_DBG_KEYS)) + return; + + hf = b43_hf_read(dev); + b43dbg(dev->wl, "Hardware key memory dump: USEDEFKEYS=%u\n", + !!(hf & B43_HF_USEDEFKEYS)); + if (b43_new_kidx_api(dev)) { + pairwise_keys_start = B43_NR_GROUP_KEYS; + count = B43_NR_GROUP_KEYS + B43_NR_PAIRWISE_KEYS; + } else { + pairwise_keys_start = B43_NR_GROUP_KEYS * 2; + count = B43_NR_GROUP_KEYS * 2 + B43_NR_PAIRWISE_KEYS; + } + for (index = 0; index < count; index++) { + key = &(dev->key[index]); + printk(KERN_DEBUG "Key slot %02u: %s", + index, (key->keyconf == NULL) ? " " : "*"); + offset = dev->ktp + (index * B43_SEC_KEYSIZE); + for (i = 0; i < B43_SEC_KEYSIZE; i += 2) { + u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, offset + i); + printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF)); + } + + algo = b43_shm_read16(dev, B43_SHM_SHARED, + B43_SHM_SH_KEYIDXBLOCK + (index * 2)); + printk(" Algo: %04X/%02X", algo, key->algorithm); + + if (index >= pairwise_keys_start) { + if (key->algorithm == B43_SEC_ALGO_TKIP) { + printk(" TKIP: "); + offset = B43_SHM_SH_TKIPTSCTTAK + (index - 4) * (10 + 4); + for (i = 0; i < 14; i += 2) { + u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, offset + i); + printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF)); + } + } + rcmta0 = b43_shm_read32(dev, B43_SHM_RCMTA, + ((index - pairwise_keys_start) * 2) + 0); + rcmta1 = b43_shm_read16(dev, B43_SHM_RCMTA, + ((index - pairwise_keys_start) * 2) + 1); + *((__le32 *)(&mac[0])) = cpu_to_le32(rcmta0); + *((__le16 *)(&mac[4])) = cpu_to_le16(rcmta1); + printk(" MAC: %pM", mac); + } else + printk(" DEFAULT KEY"); + printk("\n"); + } +} + void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags) { u32 macctl; @@ -1006,17 +1128,17 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags) B43_WARN_ON((ps_flags & B43_PS_AWAKE) && (ps_flags & B43_PS_ASLEEP)); if (ps_flags & B43_PS_ENABLED) { - hwps = 1; + hwps = true; } else if (ps_flags & B43_PS_DISABLED) { - hwps = 0; + hwps = false; } else { //TODO: If powersave is not off and FIXME is not set and we are not in adhoc // and thus is not an AP and we are associated, set bit 25 } if (ps_flags & B43_PS_AWAKE) { - awake = 1; + awake = true; } else if (ps_flags & B43_PS_ASLEEP) { - awake = 0; + awake = false; } else { //TODO: If the device is awake or this is an AP, or we are scanning, or FIXME, // or we are associated, or FIXME, or the latest PS-Poll packet sent was @@ -1024,8 +1146,8 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags) } /* FIXME: For now we force awake-on and hwps-off */ - hwps = 0; - awake = 1; + hwps = false; + awake = true; macctl = b43_read32(dev, B43_MMIO_MACCTL); if (hwps) @@ -1039,7 +1161,7 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags) b43_write32(dev, B43_MMIO_MACCTL, macctl); /* Commit write */ b43_read32(dev, B43_MMIO_MACCTL); - if (awake && dev->dev->id.revision >= 5) { + if (awake && dev->dev->core_rev >= 5) { /* Wait for the microcode to wake up. */ for (i = 0; i < 100; i++) { ucstat = b43_shm_read16(dev, B43_SHM_SHARED, @@ -1051,51 +1173,85 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags) } } -/* Turn the Analog ON/OFF */ -static void b43_switch_analog(struct b43_wldev *dev, int on) +#ifdef CONFIG_B43_BCMA +static void b43_bcma_phy_reset(struct b43_wldev *dev) { - switch (dev->phy.type) { - case B43_PHYTYPE_A: - case B43_PHYTYPE_G: - b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4); - break; - case B43_PHYTYPE_N: - b43_phy_write(dev, B43_NPHY_AFECTL_OVER, - on ? 0 : 0x7FFF); - break; - default: - B43_WARN_ON(1); - } + u32 flags; + + /* Put PHY into reset */ + flags = bcma_aread32(dev->dev->bdev, BCMA_IOCTL); + flags |= B43_BCMA_IOCTL_PHY_RESET; + flags |= B43_BCMA_IOCTL_PHY_BW_20MHZ; /* Make 20 MHz def */ + bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, flags); + udelay(2); + + b43_phy_take_out_of_reset(dev); } -void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags) +static void b43_bcma_wireless_core_reset(struct b43_wldev *dev, bool gmode) { - u32 tmslow; - u32 macctl; + u32 req = B43_BCMA_CLKCTLST_80211_PLL_REQ | + B43_BCMA_CLKCTLST_PHY_PLL_REQ; + u32 status = B43_BCMA_CLKCTLST_80211_PLL_ST | + B43_BCMA_CLKCTLST_PHY_PLL_ST; + u32 flags; + flags = B43_BCMA_IOCTL_PHY_CLKEN; + if (gmode) + flags |= B43_BCMA_IOCTL_GMODE; + b43_device_enable(dev, flags); + + bcma_core_set_clockmode(dev->dev->bdev, BCMA_CLKMODE_FAST); + b43_bcma_phy_reset(dev); + bcma_core_pll_ctl(dev->dev->bdev, req, status, true); +} +#endif + +#ifdef CONFIG_B43_SSB +static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, bool gmode) +{ + u32 flags = 0; + + if (gmode) + flags |= B43_TMSLOW_GMODE; flags |= B43_TMSLOW_PHYCLKEN; flags |= B43_TMSLOW_PHYRESET; - ssb_device_enable(dev->dev, flags); + if (dev->phy.type == B43_PHYTYPE_N) + flags |= B43_TMSLOW_PHY_BANDWIDTH_20MHZ; /* Make 20 MHz def */ + b43_device_enable(dev, flags); msleep(2); /* Wait for the PLL to turn on. */ - /* Now take the PHY out of Reset again */ - tmslow = ssb_read32(dev->dev, SSB_TMSLOW); - tmslow |= SSB_TMSLOW_FGC; - tmslow &= ~B43_TMSLOW_PHYRESET; - ssb_write32(dev->dev, SSB_TMSLOW, tmslow); - ssb_read32(dev->dev, SSB_TMSLOW); /* flush */ - msleep(1); - tmslow &= ~SSB_TMSLOW_FGC; - ssb_write32(dev->dev, SSB_TMSLOW, tmslow); - ssb_read32(dev->dev, SSB_TMSLOW); /* flush */ - msleep(1); - - /* Turn Analog ON */ - b43_switch_analog(dev, 1); + b43_phy_take_out_of_reset(dev); +} +#endif + +void b43_wireless_core_reset(struct b43_wldev *dev, bool gmode) +{ + u32 macctl; + + switch (dev->dev->bus_type) { +#ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: + b43_bcma_wireless_core_reset(dev, gmode); + break; +#endif +#ifdef CONFIG_B43_SSB + case B43_BUS_SSB: + b43_ssb_wireless_core_reset(dev, gmode); + break; +#endif + } + + /* Turn Analog ON, but only if we already know the PHY-type. + * This protects against very early setup where we don't know the + * PHY-type, yet. wireless_core_reset will be called once again later, + * when we know the PHY-type. */ + if (dev->phy.ops) + dev->phy.ops->switch_analog(dev, 1); macctl = b43_read32(dev, B43_MMIO_MACCTL); macctl &= ~B43_MACCTL_GMODE; - if (flags & B43_TMSLOW_GMODE) + if (gmode) macctl |= B43_MACCTL_GMODE; macctl |= B43_MACCTL_IHR_ENABLED; b43_write32(dev, B43_MMIO_MACCTL, macctl); @@ -1133,7 +1289,7 @@ static void drain_txstatus_queue(struct b43_wldev *dev) { u32 dummy; - if (dev->dev->id.revision < 5) + if (dev->dev->core_rev < 5) return; /* Read all entries from the microcode TXstatus FIFO * and throw them away. @@ -1150,17 +1306,19 @@ static u32 b43_jssi_read(struct b43_wldev *dev) { u32 val = 0; - val = b43_shm_read16(dev, B43_SHM_SHARED, 0x08A); + val = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_JSSI1); val <<= 16; - val |= b43_shm_read16(dev, B43_SHM_SHARED, 0x088); + val |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_JSSI0); return val; } static void b43_jssi_write(struct b43_wldev *dev, u32 jssi) { - b43_shm_write16(dev, B43_SHM_SHARED, 0x088, (jssi & 0x0000FFFF)); - b43_shm_write16(dev, B43_SHM_SHARED, 0x08A, (jssi & 0xFFFF0000) >> 16); + b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_JSSI0, + (jssi & 0x0000FFFF)); + b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_JSSI1, + (jssi & 0xFFFF0000) >> 16); } static void b43_generate_noise_sample(struct b43_wldev *dev) @@ -1174,9 +1332,11 @@ static void b43_calculate_link_quality(struct b43_wldev *dev) { /* Top half of Link Quality calculation. */ + if (dev->phy.type != B43_PHYTYPE_G) + return; if (dev->noisecalc.calculation_running) return; - dev->noisecalc.calculation_running = 1; + dev->noisecalc.calculation_running = true; dev->noisecalc.nr_samples = 0; b43_generate_noise_sample(dev); @@ -1184,7 +1344,7 @@ static void b43_calculate_link_quality(struct b43_wldev *dev) static void handle_irq_noise(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *phy = dev->phy.g; u16 tmp; u8 noise[4]; u8 i, j; @@ -1192,6 +1352,9 @@ static void handle_irq_noise(struct b43_wldev *dev) /* Bottom half of Link Quality calculation. */ + if (dev->phy.type != B43_PHYTYPE_G) + return; + /* Possible race condition: It might be possible that the user * changed to a different channel in the meantime since we * started the calculation. We ignore that fact, since it's @@ -1242,7 +1405,7 @@ static void handle_irq_noise(struct b43_wldev *dev) average -= 48; dev->stats.link_noise = average; - dev->noisecalc.calculation_running = 0; + dev->noisecalc.calculation_running = false; return; } generate_new: @@ -1251,14 +1414,14 @@ generate_new: static void handle_irq_tbtt_indication(struct b43_wldev *dev) { - if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) { + if (b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) { ///TODO: PS TBTT } else { if (1 /*FIXME: the last PSpoll frame was sent successfully */ ) b43_power_saving_ctl_bits(dev, 0); } - if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS)) - dev->dfq_valid = 1; + if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) + dev->dfq_valid = true; } static void handle_irq_atim_end(struct b43_wldev *dev) @@ -1267,7 +1430,7 @@ static void handle_irq_atim_end(struct b43_wldev *dev) b43_write32(dev, B43_MMIO_MACCMD, b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_DFQ_VALID); - dev->dfq_valid = 0; + dev->dfq_valid = false; } } @@ -1287,7 +1450,7 @@ static void handle_irq_pmq(struct b43_wldev *dev) } static void b43_write_template_common(struct b43_wldev *dev, - const u8 * data, u16 size, + const u8 *data, u16 size, u16 ram_offset, u16 shm_size_offset, u8 rate) { @@ -1334,9 +1497,9 @@ u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev, /* Get the mask of available antennas. */ if (dev->phy.gmode) - antenna_mask = dev->dev->bus->sprom.ant_available_bg; + antenna_mask = dev->dev->bus_sprom->ant_available_bg; else - antenna_mask = dev->dev->bus->sprom.ant_available_a; + antenna_mask = dev->dev->bus_sprom->ant_available_a; if (!(antenna_mask & (1 << (antenna_nr - 1)))) { /* This antenna is not available. Fall back to default. */ @@ -1346,25 +1509,6 @@ u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev, return antenna_nr; } -static int b43_antenna_from_ieee80211(struct b43_wldev *dev, u8 antenna) -{ - antenna = b43_ieee80211_antenna_sanitize(dev, antenna); - switch (antenna) { - case 0: /* default/diversity */ - return B43_ANTENNA_DEFAULT; - case 1: /* Antenna 0 */ - return B43_ANTENNA0; - case 2: /* Antenna 1 */ - return B43_ANTENNA1; - case 3: /* Antenna 2 */ - return B43_ANTENNA2; - case 4: /* Antenna 3 */ - return B43_ANTENNA3; - default: - return B43_ANTENNA_DEFAULT; - } -} - /* Convert a b43 antenna number value to the PHY TX control value. */ static u16 b43_antenna_to_phyctl(int antenna) { @@ -1377,7 +1521,8 @@ static u16 b43_antenna_to_phyctl(int antenna) return B43_TXH_PHY_ANT2; case B43_ANTENNA3: return B43_TXH_PHY_ANT3; - case B43_ANTENNA_AUTO: + case B43_ANTENNA_AUTO0: + case B43_ANTENNA_AUTO1: return B43_TXH_PHY_ANT01AUTO; } B43_WARN_ON(1); @@ -1391,14 +1536,14 @@ static void b43_write_beacon_template(struct b43_wldev *dev, unsigned int i, len, variable_len; const struct ieee80211_mgmt *bcn; const u8 *ie; - bool tim_found = 0; + bool tim_found = false; unsigned int rate; u16 ctl; int antenna; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon); bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data); - len = min((size_t) dev->wl->current_beacon->len, + len = min_t(size_t, dev->wl->current_beacon->len, 0x200 - sizeof(struct b43_plcp_hdr6)); rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value; @@ -1406,7 +1551,7 @@ static void b43_write_beacon_template(struct b43_wldev *dev, len, ram_offset, shm_size_offset, rate); /* Write the PHY TX control parameters. */ - antenna = b43_antenna_from_ieee80211(dev, info->antenna_sel_tx); + antenna = B43_ANTENNA_DEFAULT; antenna = b43_antenna_to_phyctl(antenna); ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL); /* We can't send beacons with short preamble. Would get PHY errors. */ @@ -1440,7 +1585,7 @@ static void b43_write_beacon_template(struct b43_wldev *dev, /* A valid TIM is at least 4 bytes long. */ if (ie_len < 4) break; - tim_found = 1; + tim_found = true; tim_position = sizeof(struct b43_plcp_hdr6); tim_position += offsetof(struct ieee80211_mgmt, u.beacon.variable); @@ -1470,125 +1615,14 @@ static void b43_write_beacon_template(struct b43_wldev *dev, b43dbg(dev->wl, "Updated beacon template at 0x%x\n", ram_offset); } -static void b43_write_probe_resp_plcp(struct b43_wldev *dev, - u16 shm_offset, u16 size, - struct ieee80211_rate *rate) -{ - struct b43_plcp_hdr4 plcp; - u32 tmp; - __le16 dur; - - plcp.data = 0; - b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->hw_value); - dur = ieee80211_generic_frame_duration(dev->wl->hw, - dev->wl->vif, size, - rate); - /* Write PLCP in two parts and timing for packet transfer */ - tmp = le32_to_cpu(plcp.data); - b43_shm_write16(dev, B43_SHM_SHARED, shm_offset, tmp & 0xFFFF); - b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 2, tmp >> 16); - b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 6, le16_to_cpu(dur)); -} - -/* Instead of using custom probe response template, this function - * just patches custom beacon template by: - * 1) Changing packet type - * 2) Patching duration field - * 3) Stripping TIM - */ -static const u8 * b43_generate_probe_resp(struct b43_wldev *dev, - u16 *dest_size, - struct ieee80211_rate *rate) -{ - const u8 *src_data; - u8 *dest_data; - u16 src_size, elem_size, src_pos, dest_pos; - __le16 dur; - struct ieee80211_hdr *hdr; - size_t ie_start; - - src_size = dev->wl->current_beacon->len; - src_data = (const u8 *)dev->wl->current_beacon->data; - - /* Get the start offset of the variable IEs in the packet. */ - ie_start = offsetof(struct ieee80211_mgmt, u.probe_resp.variable); - B43_WARN_ON(ie_start != offsetof(struct ieee80211_mgmt, u.beacon.variable)); - - if (B43_WARN_ON(src_size < ie_start)) - return NULL; - - dest_data = kmalloc(src_size, GFP_ATOMIC); - if (unlikely(!dest_data)) - return NULL; - - /* Copy the static data and all Information Elements, except the TIM. */ - memcpy(dest_data, src_data, ie_start); - src_pos = ie_start; - dest_pos = ie_start; - for ( ; src_pos < src_size - 2; src_pos += elem_size) { - elem_size = src_data[src_pos + 1] + 2; - if (src_data[src_pos] == 5) { - /* This is the TIM. */ - continue; - } - memcpy(dest_data + dest_pos, src_data + src_pos, - elem_size); - dest_pos += elem_size; - } - *dest_size = dest_pos; - hdr = (struct ieee80211_hdr *)dest_data; - - /* Set the frame control. */ - hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | - IEEE80211_STYPE_PROBE_RESP); - dur = ieee80211_generic_frame_duration(dev->wl->hw, - dev->wl->vif, *dest_size, - rate); - hdr->duration_id = dur; - - return dest_data; -} - -static void b43_write_probe_resp_template(struct b43_wldev *dev, - u16 ram_offset, - u16 shm_size_offset, - struct ieee80211_rate *rate) -{ - const u8 *probe_resp_data; - u16 size; - - size = dev->wl->current_beacon->len; - probe_resp_data = b43_generate_probe_resp(dev, &size, rate); - if (unlikely(!probe_resp_data)) - return; - - /* Looks like PLCP headers plus packet timings are stored for - * all possible basic rates - */ - b43_write_probe_resp_plcp(dev, 0x31A, size, &b43_b_ratetable[0]); - b43_write_probe_resp_plcp(dev, 0x32C, size, &b43_b_ratetable[1]); - b43_write_probe_resp_plcp(dev, 0x33E, size, &b43_b_ratetable[2]); - b43_write_probe_resp_plcp(dev, 0x350, size, &b43_b_ratetable[3]); - - size = min((size_t) size, 0x200 - sizeof(struct b43_plcp_hdr6)); - b43_write_template_common(dev, probe_resp_data, - size, ram_offset, shm_size_offset, - rate->hw_value); - kfree(probe_resp_data); -} - static void b43_upload_beacon0(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; if (wl->beacon0_uploaded) return; - b43_write_beacon_template(dev, 0x68, 0x18); - /* FIXME: Probe resp upload doesn't really belong here, - * but we don't use that feature anyway. */ - b43_write_probe_resp_template(dev, 0x268, 0x4A, - &__b43_ratetable[3]); - wl->beacon0_uploaded = 1; + b43_write_beacon_template(dev, B43_SHM_SH_BT_BASE0, B43_SHM_SH_BTL0); + wl->beacon0_uploaded = true; } static void b43_upload_beacon1(struct b43_wldev *dev) @@ -1597,8 +1631,8 @@ static void b43_upload_beacon1(struct b43_wldev *dev) if (wl->beacon1_uploaded) return; - b43_write_beacon_template(dev, 0x468, 0x1A); - wl->beacon1_uploaded = 1; + b43_write_beacon_template(dev, B43_SHM_SH_BT_BASE1, B43_SHM_SH_BTL1); + wl->beacon1_uploaded = true; } static void handle_irq_beacon(struct b43_wldev *dev) @@ -1606,14 +1640,15 @@ static void handle_irq_beacon(struct b43_wldev *dev) struct b43_wl *wl = dev->wl; u32 cmd, beacon0_valid, beacon1_valid; - if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP) && - !b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT)) + if (!b43_is_mode(wl, NL80211_IFTYPE_AP) && + !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) && + !b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) return; /* This is the bottom half of the asynchronous beacon update. */ /* Ignore interrupt in the future. */ - dev->irq_savedstate &= ~B43_IRQ_BEACON; + dev->irq_mask &= ~B43_IRQ_BEACON; cmd = b43_read32(dev, B43_MMIO_MACCMD); beacon0_valid = (cmd & B43_MACCMD_BEACON0_VALID); @@ -1622,14 +1657,14 @@ static void handle_irq_beacon(struct b43_wldev *dev) /* Schedule interrupt manually, if busy. */ if (beacon0_valid && beacon1_valid) { b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_BEACON); - dev->irq_savedstate |= B43_IRQ_BEACON; + dev->irq_mask |= B43_IRQ_BEACON; return; } if (unlikely(wl->beacon_templates_virgin)) { /* We never uploaded a beacon before. * Upload both templates now, but only mark one valid. */ - wl->beacon_templates_virgin = 0; + wl->beacon_templates_virgin = false; b43_upload_beacon0(dev); b43_upload_beacon1(dev); cmd = b43_read32(dev, B43_MMIO_MACCMD); @@ -1650,6 +1685,27 @@ static void handle_irq_beacon(struct b43_wldev *dev) } } +static void b43_do_beacon_update_trigger_work(struct b43_wldev *dev) +{ + u32 old_irq_mask = dev->irq_mask; + + /* update beacon right away or defer to irq */ + handle_irq_beacon(dev); + if (old_irq_mask != dev->irq_mask) { + /* The handler updated the IRQ mask. */ + B43_WARN_ON(!dev->irq_mask); + if (b43_read32(dev, B43_MMIO_GEN_IRQ_MASK)) { + b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask); + } else { + /* Device interrupts are currently disabled. That means + * we just ran the hardirq handler and scheduled the + * IRQ thread. The thread will write the IRQ mask when + * it finished, so there's nothing to do here. Writing + * the mask _here_ would incorrectly re-enable IRQs. */ + } + } +} + static void b43_beacon_update_trigger_work(struct work_struct *work) { struct b43_wl *wl = container_of(work, struct b43_wl, @@ -1659,21 +1715,22 @@ static void b43_beacon_update_trigger_work(struct work_struct *work) mutex_lock(&wl->mutex); dev = wl->current_dev; if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) { - spin_lock_irq(&wl->irq_lock); - /* update beacon right away or defer to irq */ - dev->irq_savedstate = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); - handle_irq_beacon(dev); - /* The handler might have updated the IRQ mask. */ - b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, - dev->irq_savedstate); - mmiowb(); - spin_unlock_irq(&wl->irq_lock); + if (b43_bus_host_is_sdio(dev->dev)) { + /* wl->mutex is enough. */ + b43_do_beacon_update_trigger_work(dev); + mmiowb(); + } else { + spin_lock_irq(&wl->hardirq_lock); + b43_do_beacon_update_trigger_work(dev); + mmiowb(); + spin_unlock_irq(&wl->hardirq_lock); + } } mutex_unlock(&wl->mutex); } /* Asynchronously update the packet templates in template RAM. - * Locking: Requires wl->irq_lock to be locked. */ + * Locking: Requires wl->mutex to be locked. */ static void b43_update_templates(struct b43_wl *wl) { struct sk_buff *beacon; @@ -1695,34 +1752,15 @@ static void b43_update_templates(struct b43_wl *wl) if (wl->current_beacon) dev_kfree_skb_any(wl->current_beacon); wl->current_beacon = beacon; - wl->beacon0_uploaded = 0; - wl->beacon1_uploaded = 0; - queue_work(wl->hw->workqueue, &wl->beacon_update_trigger); -} - -static void b43_set_ssid(struct b43_wldev *dev, const u8 * ssid, u8 ssid_len) -{ - u32 tmp; - u16 i, len; - - len = min((u16) ssid_len, (u16) 0x100); - for (i = 0; i < len; i += sizeof(u32)) { - tmp = (u32) (ssid[i + 0]); - if (i + 1 < len) - tmp |= (u32) (ssid[i + 1]) << 8; - if (i + 2 < len) - tmp |= (u32) (ssid[i + 2]) << 16; - if (i + 3 < len) - tmp |= (u32) (ssid[i + 3]) << 24; - b43_shm_write32(dev, B43_SHM_SHARED, 0x380 + i, tmp); - } - b43_shm_write16(dev, B43_SHM_SHARED, 0x48, len); + wl->beacon0_uploaded = false; + wl->beacon1_uploaded = false; + ieee80211_queue_work(wl->hw, &wl->beacon_update_trigger); } static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int) { b43_time_lock(dev); - if (dev->dev->id.revision >= 3) { + if (dev->dev->core_rev >= 3) { b43_write32(dev, B43_MMIO_TSF_CFP_REP, (beacon_int << 16)); b43_write32(dev, B43_MMIO_TSF_CFP_START, (beacon_int << 10)); } else { @@ -1829,18 +1867,15 @@ out: B43_DEBUGIRQ_REASON_REG, B43_DEBUGIRQ_ACK); } -/* Interrupt handler bottom-half */ -static void b43_interrupt_tasklet(struct b43_wldev *dev) +static void b43_do_interrupt_thread(struct b43_wldev *dev) { u32 reason; u32 dma_reason[ARRAY_SIZE(dev->dma_reason)]; u32 merged_dma_reason = 0; int i; - unsigned long flags; - spin_lock_irqsave(&dev->wl->irq_lock, flags); - - B43_WARN_ON(b43_status(dev) != B43_STAT_STARTED); + if (unlikely(b43_status(dev) != B43_STAT_STARTED)) + return; reason = dev->irq_reason; for (i = 0; i < ARRAY_SIZE(dma_reason); i++) { @@ -1863,28 +1898,18 @@ static void b43_interrupt_tasklet(struct b43_wldev *dev) } } - if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK | - B43_DMAIRQ_NONFATALMASK))) { - if (merged_dma_reason & B43_DMAIRQ_FATALMASK) { - b43err(dev->wl, "Fatal DMA error: " - "0x%08X, 0x%08X, 0x%08X, " - "0x%08X, 0x%08X, 0x%08X\n", - dma_reason[0], dma_reason[1], - dma_reason[2], dma_reason[3], - dma_reason[4], dma_reason[5]); - b43_controller_restart(dev, "DMA error"); - mmiowb(); - spin_unlock_irqrestore(&dev->wl->irq_lock, flags); - return; - } - if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) { - b43err(dev->wl, "DMA error: " - "0x%08X, 0x%08X, 0x%08X, " - "0x%08X, 0x%08X, 0x%08X\n", - dma_reason[0], dma_reason[1], - dma_reason[2], dma_reason[3], - dma_reason[4], dma_reason[5]); - } + if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK))) { + b43err(dev->wl, + "Fatal DMA error: 0x%08X, 0x%08X, 0x%08X, 0x%08X, 0x%08X, 0x%08X\n", + dma_reason[0], dma_reason[1], + dma_reason[2], dma_reason[3], + dma_reason[4], dma_reason[5]); + b43err(dev->wl, "This device does not support DMA " + "on your system. It will now be switched to PIO.\n"); + /* Fall back to PIO transfers if we get fatal DMA errors! */ + dev->use_pio = true; + b43_controller_restart(dev, "DMA error"); + return; } if (unlikely(reason & B43_IRQ_UCODE_DEBUG)) @@ -1903,6 +1928,11 @@ static void b43_interrupt_tasklet(struct b43_wldev *dev) handle_irq_noise(dev); /* Check the DMA reason registers for received data. */ + if (dma_reason[0] & B43_DMAIRQ_RDESC_UFLOW) { + if (B43_DEBUG) + b43warn(dev->wl, "RX descriptor underrun\n"); + b43_dma_handle_rx_overflow(dev->dma.rx_ring); + } if (dma_reason[0] & B43_DMAIRQ_RX_DONE) { if (b43_using_pio_transfers(dev)) b43_pio_rx(dev->pio.rx_queue); @@ -1918,47 +1948,49 @@ static void b43_interrupt_tasklet(struct b43_wldev *dev) if (reason & B43_IRQ_TX_OK) handle_irq_transmit_status(dev); - b43_interrupt_enable(dev, dev->irq_savedstate); - mmiowb(); - spin_unlock_irqrestore(&dev->wl->irq_lock, flags); + /* Re-enable interrupts on the device by restoring the current interrupt mask. */ + b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask); + +#if B43_DEBUG + if (b43_debug(dev, B43_DBG_VERBOSESTATS)) { + dev->irq_count++; + for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) { + if (reason & (1 << i)) + dev->irq_bit_count[i]++; + } + } +#endif } -static void b43_interrupt_ack(struct b43_wldev *dev, u32 reason) +/* Interrupt thread handler. Handles device interrupts in thread context. */ +static irqreturn_t b43_interrupt_thread_handler(int irq, void *dev_id) { - b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason); + struct b43_wldev *dev = dev_id; - b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]); - b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]); - b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]); - b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]); - b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]); - b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]); + mutex_lock(&dev->wl->mutex); + b43_do_interrupt_thread(dev); + mmiowb(); + mutex_unlock(&dev->wl->mutex); + + return IRQ_HANDLED; } -/* Interrupt handler top-half */ -static irqreturn_t b43_interrupt_handler(int irq, void *dev_id) +static irqreturn_t b43_do_interrupt(struct b43_wldev *dev) { - irqreturn_t ret = IRQ_NONE; - struct b43_wldev *dev = dev_id; u32 reason; - if (!dev) - return IRQ_NONE; - - spin_lock(&dev->wl->irq_lock); + /* This code runs under wl->hardirq_lock, but _only_ on non-SDIO busses. + * On SDIO, this runs under wl->mutex. */ - if (b43_status(dev) < B43_STAT_STARTED) - goto out; reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); if (reason == 0xffffffff) /* shared IRQ */ - goto out; - ret = IRQ_HANDLED; - reason &= b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); + return IRQ_NONE; + reason &= dev->irq_mask; if (!reason) - goto out; + return IRQ_NONE; dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON) - & 0x0001DC00; + & 0x0001FC00; dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON) & 0x0000DC00; dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON) @@ -1967,23 +1999,63 @@ static irqreturn_t b43_interrupt_handler(int irq, void *dev_id) & 0x0001DC00; dev->dma_reason[4] = b43_read32(dev, B43_MMIO_DMA4_REASON) & 0x0000DC00; +/* Unused ring dev->dma_reason[5] = b43_read32(dev, B43_MMIO_DMA5_REASON) & 0x0000DC00; +*/ + + /* ACK the interrupt. */ + b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason); + b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]); + b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]); + b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]); + b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]); + b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]); +/* Unused ring + b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]); +*/ - b43_interrupt_ack(dev, reason); - /* disable all IRQs. They are enabled again in the bottom half. */ - dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL); - /* save the reason code and call our bottom half. */ + /* Disable IRQs on the device. The IRQ thread handler will re-enable them. */ + b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0); + /* Save the reason bitmasks for the IRQ thread handler. */ dev->irq_reason = reason; - tasklet_schedule(&dev->isr_tasklet); - out: + + return IRQ_WAKE_THREAD; +} + +/* Interrupt handler top-half. This runs with interrupts disabled. */ +static irqreturn_t b43_interrupt_handler(int irq, void *dev_id) +{ + struct b43_wldev *dev = dev_id; + irqreturn_t ret; + + if (unlikely(b43_status(dev) < B43_STAT_STARTED)) + return IRQ_NONE; + + spin_lock(&dev->wl->hardirq_lock); + ret = b43_do_interrupt(dev); mmiowb(); - spin_unlock(&dev->wl->irq_lock); + spin_unlock(&dev->wl->hardirq_lock); return ret; } -static void do_release_fw(struct b43_firmware_file *fw) +/* SDIO interrupt handler. This runs in process context. */ +static void b43_sdio_interrupt_handler(struct b43_wldev *dev) +{ + struct b43_wl *wl = dev->wl; + irqreturn_t ret; + + mutex_lock(&wl->mutex); + + ret = b43_do_interrupt(dev); + if (ret == IRQ_WAKE_THREAD) + b43_do_interrupt_thread(dev); + + mutex_unlock(&wl->mutex); +} + +void b43_do_release_fw(struct b43_firmware_file *fw) { release_firmware(fw->data); fw->data = NULL; @@ -1992,71 +2064,118 @@ static void do_release_fw(struct b43_firmware_file *fw) static void b43_release_firmware(struct b43_wldev *dev) { - do_release_fw(&dev->fw.ucode); - do_release_fw(&dev->fw.pcm); - do_release_fw(&dev->fw.initvals); - do_release_fw(&dev->fw.initvals_band); + complete(&dev->fw_load_complete); + b43_do_release_fw(&dev->fw.ucode); + b43_do_release_fw(&dev->fw.pcm); + b43_do_release_fw(&dev->fw.initvals); + b43_do_release_fw(&dev->fw.initvals_band); } static void b43_print_fw_helptext(struct b43_wl *wl, bool error) { - const char *text; + const char text[] = + "You must go to " \ + "http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware " \ + "and download the correct firmware for this driver version. " \ + "Please carefully read all instructions on this website.\n"; - text = "You must go to " - "http://linuxwireless.org/en/users/Drivers/b43#devicefirmware " - "and download the latest firmware (version 4).\n"; if (error) b43err(wl, text); else b43warn(wl, text); } -static int do_request_fw(struct b43_wldev *dev, - const char *name, - struct b43_firmware_file *fw, - bool silent) +static void b43_fw_cb(const struct firmware *firmware, void *context) +{ + struct b43_request_fw_context *ctx = context; + + ctx->blob = firmware; + complete(&ctx->dev->fw_load_complete); +} + +int b43_do_request_fw(struct b43_request_fw_context *ctx, + const char *name, + struct b43_firmware_file *fw, bool async) { - char path[sizeof(modparam_fwpostfix) + 32]; - const struct firmware *blob; struct b43_fw_header *hdr; u32 size; int err; if (!name) { /* Don't fetch anything. Free possibly cached firmware. */ - do_release_fw(fw); + /* FIXME: We should probably keep it anyway, to save some headache + * on suspend/resume with multiband devices. */ + b43_do_release_fw(fw); return 0; } if (fw->filename) { - if (strcmp(fw->filename, name) == 0) + if ((fw->type == ctx->req_type) && + (strcmp(fw->filename, name) == 0)) return 0; /* Already have this fw. */ /* Free the cached firmware first. */ - do_release_fw(fw); + /* FIXME: We should probably do this later after we successfully + * got the new fw. This could reduce headache with multiband devices. + * We could also redesign this to cache the firmware for all possible + * bands all the time. */ + b43_do_release_fw(fw); + } + + switch (ctx->req_type) { + case B43_FWTYPE_PROPRIETARY: + snprintf(ctx->fwname, sizeof(ctx->fwname), + "b43%s/%s.fw", + modparam_fwpostfix, name); + break; + case B43_FWTYPE_OPENSOURCE: + snprintf(ctx->fwname, sizeof(ctx->fwname), + "b43-open%s/%s.fw", + modparam_fwpostfix, name); + break; + default: + B43_WARN_ON(1); + return -ENOSYS; + } + if (async) { + /* do this part asynchronously */ + init_completion(&ctx->dev->fw_load_complete); + err = request_firmware_nowait(THIS_MODULE, 1, ctx->fwname, + ctx->dev->dev->dev, GFP_KERNEL, + ctx, b43_fw_cb); + if (err < 0) { + pr_err("Unable to load firmware\n"); + return err; + } + wait_for_completion(&ctx->dev->fw_load_complete); + if (ctx->blob) + goto fw_ready; + /* On some ARM systems, the async request will fail, but the next sync + * request works. For this reason, we fall through here + */ } - - snprintf(path, ARRAY_SIZE(path), - "b43%s/%s.fw", - modparam_fwpostfix, name); - err = request_firmware(&blob, path, dev->dev->dev); + err = request_firmware(&ctx->blob, ctx->fwname, + ctx->dev->dev->dev); if (err == -ENOENT) { - if (!silent) { - b43err(dev->wl, "Firmware file \"%s\" not found\n", - path); - } + snprintf(ctx->errors[ctx->req_type], + sizeof(ctx->errors[ctx->req_type]), + "Firmware file \"%s\" not found\n", + ctx->fwname); return err; } else if (err) { - b43err(dev->wl, "Firmware file \"%s\" request failed (err=%d)\n", - path, err); + snprintf(ctx->errors[ctx->req_type], + sizeof(ctx->errors[ctx->req_type]), + "Firmware file \"%s\" request failed (err=%d)\n", + ctx->fwname, err); return err; } - if (blob->size < sizeof(struct b43_fw_header)) +fw_ready: + if (ctx->blob->size < sizeof(struct b43_fw_header)) goto err_format; - hdr = (struct b43_fw_header *)(blob->data); + hdr = (struct b43_fw_header *)(ctx->blob->data); switch (hdr->type) { case B43_FW_TYPE_UCODE: case B43_FW_TYPE_PCM: size = be32_to_cpu(hdr->size); - if (size != blob->size - sizeof(struct b43_fw_header)) + if (size != ctx->blob->size - sizeof(struct b43_fw_header)) goto err_format; /* fallthrough */ case B43_FW_TYPE_IV: @@ -2067,37 +2186,68 @@ static int do_request_fw(struct b43_wldev *dev, goto err_format; } - fw->data = blob; + fw->data = ctx->blob; fw->filename = name; + fw->type = ctx->req_type; return 0; err_format: - b43err(dev->wl, "Firmware file \"%s\" format error.\n", path); - release_firmware(blob); + snprintf(ctx->errors[ctx->req_type], + sizeof(ctx->errors[ctx->req_type]), + "Firmware file \"%s\" format error.\n", ctx->fwname); + release_firmware(ctx->blob); return -EPROTO; } -static int b43_request_firmware(struct b43_wldev *dev) +static int b43_try_request_fw(struct b43_request_fw_context *ctx) { - struct b43_firmware *fw = &dev->fw; - const u8 rev = dev->dev->id.revision; + struct b43_wldev *dev = ctx->dev; + struct b43_firmware *fw = &ctx->dev->fw; + const u8 rev = ctx->dev->dev->core_rev; const char *filename; u32 tmshigh; int err; + /* Files for HT and LCN were found by trying one by one */ + /* Get microcode */ - tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH); - if ((rev >= 5) && (rev <= 10)) + if ((rev >= 5) && (rev <= 10)) { filename = "ucode5"; - else if ((rev >= 11) && (rev <= 12)) + } else if ((rev >= 11) && (rev <= 12)) { filename = "ucode11"; - else if (rev >= 13) + } else if (rev == 13) { filename = "ucode13"; - else - goto err_no_ucode; - err = do_request_fw(dev, filename, &fw->ucode, 0); + } else if (rev == 14) { + filename = "ucode14"; + } else if (rev == 15) { + filename = "ucode15"; + } else { + switch (dev->phy.type) { + case B43_PHYTYPE_N: + if (rev >= 16) + filename = "ucode16_mimo"; + else + goto err_no_ucode; + break; + case B43_PHYTYPE_HT: + if (rev == 29) + filename = "ucode29_mimo"; + else + goto err_no_ucode; + break; + case B43_PHYTYPE_LCN: + if (rev == 24) + filename = "ucode24_mimo"; + else + goto err_no_ucode; + break; + default: + goto err_no_ucode; + } + } + err = b43_do_request_fw(ctx, filename, &fw->ucode, true); if (err) goto err_load; @@ -2108,12 +2258,12 @@ static int b43_request_firmware(struct b43_wldev *dev) filename = NULL; else goto err_no_pcm; - fw->pcm_request_failed = 0; - err = do_request_fw(dev, filename, &fw->pcm, 1); + fw->pcm_request_failed = false; + err = b43_do_request_fw(ctx, filename, &fw->pcm, false); if (err == -ENOENT) { /* We did not find a PCM file? Not fatal, but * core rev <= 10 must do without hwcrypto then. */ - fw->pcm_request_failed = 1; + fw->pcm_request_failed = true; } else if (err) goto err_load; @@ -2121,6 +2271,7 @@ static int b43_request_firmware(struct b43_wldev *dev) switch (dev->phy.type) { case B43_PHYTYPE_A: if ((rev >= 5) && (rev <= 10)) { + tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH); if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY) filename = "a0g1initvals5"; else @@ -2137,15 +2288,39 @@ static int b43_request_firmware(struct b43_wldev *dev) goto err_no_initvals; break; case B43_PHYTYPE_N: - if ((rev >= 11) && (rev <= 12)) + if (rev >= 16) + filename = "n0initvals16"; + else if ((rev >= 11) && (rev <= 12)) filename = "n0initvals11"; else goto err_no_initvals; break; + case B43_PHYTYPE_LP: + if (rev == 13) + filename = "lp0initvals13"; + else if (rev == 14) + filename = "lp0initvals14"; + else if (rev >= 15) + filename = "lp0initvals15"; + else + goto err_no_initvals; + break; + case B43_PHYTYPE_HT: + if (rev == 29) + filename = "ht0initvals29"; + else + goto err_no_initvals; + break; + case B43_PHYTYPE_LCN: + if (rev == 24) + filename = "lcn0initvals24"; + else + goto err_no_initvals; + break; default: goto err_no_initvals; } - err = do_request_fw(dev, filename, &fw->initvals, 0); + err = b43_do_request_fw(ctx, filename, &fw->initvals, false); if (err) goto err_load; @@ -2153,6 +2328,7 @@ static int b43_request_firmware(struct b43_wldev *dev) switch (dev->phy.type) { case B43_PHYTYPE_A: if ((rev >= 5) && (rev <= 10)) { + tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH); if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY) filename = "a0g1bsinitvals5"; else @@ -2171,38 +2347,68 @@ static int b43_request_firmware(struct b43_wldev *dev) goto err_no_initvals; break; case B43_PHYTYPE_N: - if ((rev >= 11) && (rev <= 12)) + if (rev >= 16) + filename = "n0bsinitvals16"; + else if ((rev >= 11) && (rev <= 12)) filename = "n0bsinitvals11"; else goto err_no_initvals; break; + case B43_PHYTYPE_LP: + if (rev == 13) + filename = "lp0bsinitvals13"; + else if (rev == 14) + filename = "lp0bsinitvals14"; + else if (rev >= 15) + filename = "lp0bsinitvals15"; + else + goto err_no_initvals; + break; + case B43_PHYTYPE_HT: + if (rev == 29) + filename = "ht0bsinitvals29"; + else + goto err_no_initvals; + break; + case B43_PHYTYPE_LCN: + if (rev == 24) + filename = "lcn0bsinitvals24"; + else + goto err_no_initvals; + break; default: goto err_no_initvals; } - err = do_request_fw(dev, filename, &fw->initvals_band, 0); + err = b43_do_request_fw(ctx, filename, &fw->initvals_band, false); if (err) goto err_load; - return 0; + fw->opensource = (ctx->req_type == B43_FWTYPE_OPENSOURCE); -err_load: - b43_print_fw_helptext(dev->wl, 1); - goto error; + return 0; err_no_ucode: - err = -ENODEV; - b43err(dev->wl, "No microcode available for core rev %u\n", rev); + err = ctx->fatal_failure = -EOPNOTSUPP; + b43err(dev->wl, "The driver does not know which firmware (ucode) " + "is required for your device (wl-core rev %u)\n", rev); goto error; err_no_pcm: - err = -ENODEV; - b43err(dev->wl, "No PCM available for core rev %u\n", rev); + err = ctx->fatal_failure = -EOPNOTSUPP; + b43err(dev->wl, "The driver does not know which firmware (PCM) " + "is required for your device (wl-core rev %u)\n", rev); goto error; err_no_initvals: - err = -ENODEV; - b43err(dev->wl, "No Initial Values firmware file for PHY %u, " - "core rev %u\n", dev->phy.type, rev); + err = ctx->fatal_failure = -EOPNOTSUPP; + b43err(dev->wl, "The driver does not know which firmware (initvals) " + "is required for your device (wl-core rev %u)\n", rev); + goto error; + +err_load: + /* We failed to load this firmware image. The error message + * already is in ctx->errors. Return and let our caller decide + * what to do. */ goto error; error: @@ -2210,8 +2416,76 @@ error: return err; } +static int b43_one_core_attach(struct b43_bus_dev *dev, struct b43_wl *wl); +static void b43_one_core_detach(struct b43_bus_dev *dev); +static int b43_rng_init(struct b43_wl *wl); + +static void b43_request_firmware(struct work_struct *work) +{ + struct b43_wl *wl = container_of(work, + struct b43_wl, firmware_load); + struct b43_wldev *dev = wl->current_dev; + struct b43_request_fw_context *ctx; + unsigned int i; + int err; + const char *errmsg; + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return; + ctx->dev = dev; + + ctx->req_type = B43_FWTYPE_PROPRIETARY; + err = b43_try_request_fw(ctx); + if (!err) + goto start_ieee80211; /* Successfully loaded it. */ + /* Was fw version known? */ + if (ctx->fatal_failure) + goto out; + + /* proprietary fw not found, try open source */ + ctx->req_type = B43_FWTYPE_OPENSOURCE; + err = b43_try_request_fw(ctx); + if (!err) + goto start_ieee80211; /* Successfully loaded it. */ + if(ctx->fatal_failure) + goto out; + + /* Could not find a usable firmware. Print the errors. */ + for (i = 0; i < B43_NR_FWTYPES; i++) { + errmsg = ctx->errors[i]; + if (strlen(errmsg)) + b43err(dev->wl, "%s", errmsg); + } + b43_print_fw_helptext(dev->wl, 1); + goto out; + +start_ieee80211: + wl->hw->queues = B43_QOS_QUEUE_NUM; + if (!modparam_qos || dev->fw.opensource) + wl->hw->queues = 1; + + err = ieee80211_register_hw(wl->hw); + if (err) + goto err_one_core_detach; + wl->hw_registred = true; + b43_leds_register(wl->current_dev); + + /* Register HW RNG driver */ + b43_rng_init(wl); + + goto out; + +err_one_core_detach: + b43_one_core_detach(dev->dev); + +out: + kfree(ctx); +} + static int b43_upload_microcode(struct b43_wldev *dev) { + struct wiphy *wiphy = dev->wl->hw->wiphy; const size_t hdr_len = sizeof(struct b43_fw_header); const __be32 *data; unsigned int i, len; @@ -2256,10 +2530,8 @@ static int b43_upload_microcode(struct b43_wldev *dev) b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_ALL); /* Start the microcode PSM */ - macctl = b43_read32(dev, B43_MMIO_MACCTL); - macctl &= ~B43_MACCTL_PSM_JMP0; - macctl |= B43_MACCTL_PSM_RUN; - b43_write32(dev, B43_MMIO_MACCTL, macctl); + b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_PSM_JMP0, + B43_MACCTL_PSM_RUN); /* Wait for the microcode to load and respond */ i = 0; @@ -2274,11 +2546,7 @@ static int b43_upload_microcode(struct b43_wldev *dev) err = -ENODEV; goto error; } - msleep_interruptible(50); - if (signal_pending(current)) { - err = -EINTR; - goto error; - } + msleep(50); } b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); /* dummy read */ @@ -2298,14 +2566,34 @@ static int b43_upload_microcode(struct b43_wldev *dev) } dev->fw.rev = fwrev; dev->fw.patch = fwpatch; - dev->fw.opensource = (fwdate == 0xFFFF); + if (dev->fw.rev >= 598) + dev->fw.hdr_format = B43_FW_HDR_598; + else if (dev->fw.rev >= 410) + dev->fw.hdr_format = B43_FW_HDR_410; + else + dev->fw.hdr_format = B43_FW_HDR_351; + WARN_ON(dev->fw.opensource != (fwdate == 0xFFFF)); + + dev->qos_enabled = dev->wl->hw->queues > 1; + /* Default to firmware/hardware crypto acceleration. */ + dev->hwcrypto_enabled = true; if (dev->fw.opensource) { + u16 fwcapa; + /* Patchlevel info is encoded in the "time" field. */ dev->fw.patch = fwtime; - b43info(dev->wl, "Loading OpenSource firmware version %u.%u%s\n", - dev->fw.rev, dev->fw.patch, - dev->fw.pcm_request_failed ? " (Hardware crypto not supported)" : ""); + b43info(dev->wl, "Loading OpenSource firmware version %u.%u\n", + dev->fw.rev, dev->fw.patch); + + fwcapa = b43_fwcapa_read(dev); + if (!(fwcapa & B43_FWCAPA_HWCRYPTO) || dev->fw.pcm_request_failed) { + b43info(dev->wl, "Hardware crypto acceleration not supported by firmware\n"); + /* Disable hardware crypto and fall back to software crypto. */ + dev->hwcrypto_enabled = false; + } + /* adding QoS support should use an offline discovery mechanism */ + WARN(fwcapa & B43_FWCAPA_QOS, "QoS in OpenFW not supported\n"); } else { b43info(dev->wl, "Loading firmware version %u.%u " "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n", @@ -2319,19 +2607,25 @@ static int b43_upload_microcode(struct b43_wldev *dev) } } - if (b43_is_old_txhdr_format(dev)) { + snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u", + dev->fw.rev, dev->fw.patch); + wiphy->hw_version = dev->dev->core_id; + + if (dev->fw.hdr_format == B43_FW_HDR_351) { + /* We're over the deadline, but we keep support for old fw + * until it turns out to be in major conflict with something new. */ b43warn(dev->wl, "You are using an old firmware image. " - "Support for old firmware will be removed in July 2008.\n"); + "Support for old firmware will be removed soon " + "(official deadline was July 2008).\n"); b43_print_fw_helptext(dev->wl, 0); } return 0; error: - macctl = b43_read32(dev, B43_MMIO_MACCTL); - macctl &= ~B43_MACCTL_PSM_RUN; - macctl |= B43_MACCTL_PSM_JMP0; - b43_write32(dev, B43_MMIO_MACCTL, macctl); + /* Stop the microcode PSM. */ + b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_PSM_RUN, + B43_MACCTL_PSM_JMP0); return err; } @@ -2404,76 +2698,105 @@ static int b43_upload_initvals(struct b43_wldev *dev) struct b43_firmware *fw = &dev->fw; const struct b43_iv *ivals; size_t count; - int err; hdr = (const struct b43_fw_header *)(fw->initvals.data->data); ivals = (const struct b43_iv *)(fw->initvals.data->data + hdr_len); count = be32_to_cpu(hdr->size); - err = b43_write_initvals(dev, ivals, count, + return b43_write_initvals(dev, ivals, count, fw->initvals.data->size - hdr_len); - if (err) - goto out; - if (fw->initvals_band.data) { - hdr = (const struct b43_fw_header *)(fw->initvals_band.data->data); - ivals = (const struct b43_iv *)(fw->initvals_band.data->data + hdr_len); - count = be32_to_cpu(hdr->size); - err = b43_write_initvals(dev, ivals, count, - fw->initvals_band.data->size - hdr_len); - if (err) - goto out; - } -out: +} - return err; +static int b43_upload_initvals_band(struct b43_wldev *dev) +{ + const size_t hdr_len = sizeof(struct b43_fw_header); + const struct b43_fw_header *hdr; + struct b43_firmware *fw = &dev->fw; + const struct b43_iv *ivals; + size_t count; + + if (!fw->initvals_band.data) + return 0; + + hdr = (const struct b43_fw_header *)(fw->initvals_band.data->data); + ivals = (const struct b43_iv *)(fw->initvals_band.data->data + hdr_len); + count = be32_to_cpu(hdr->size); + return b43_write_initvals(dev, ivals, count, + fw->initvals_band.data->size - hdr_len); } /* Initialize the GPIOs * http://bcm-specs.sipsolutions.net/GPIO */ + +#ifdef CONFIG_B43_SSB +static struct ssb_device *b43_ssb_gpio_dev(struct b43_wldev *dev) +{ + struct ssb_bus *bus = dev->dev->sdev->bus; + +#ifdef CONFIG_SSB_DRIVER_PCICORE + return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev); +#else + return bus->chipco.dev; +#endif +} +#endif + static int b43_gpio_init(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->dev->bus; - struct ssb_device *gpiodev, *pcidev = NULL; +#ifdef CONFIG_B43_SSB + struct ssb_device *gpiodev; +#endif u32 mask, set; - b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) - & ~B43_MACCTL_GPOUTSMSK); - - b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK) - | 0x000F); + b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_GPOUTSMSK, 0); + b43_maskset16(dev, B43_MMIO_GPIO_MASK, ~0, 0xF); mask = 0x0000001F; set = 0x0000000F; - if (dev->dev->bus->chip_id == 0x4301) { + if (dev->dev->chip_id == 0x4301) { mask |= 0x0060; set |= 0x0060; + } else if (dev->dev->chip_id == 0x5354) { + /* Don't allow overtaking buttons GPIOs */ + set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */ } + if (0 /* FIXME: conditional unknown */ ) { b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK) | 0x0100); - mask |= 0x0180; - set |= 0x0180; - } - if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) { + /* BT Coexistance Input */ + mask |= 0x0080; + set |= 0x0080; + /* BT Coexistance Out */ + mask |= 0x0100; + set |= 0x0100; + } + if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) { + /* PA is controlled by gpio 9, let ucode handle it */ b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK) | 0x0200); mask |= 0x0200; set |= 0x0200; } - if (dev->dev->id.revision >= 2) - mask |= 0x0010; /* FIXME: This is redundant. */ -#ifdef CONFIG_SSB_DRIVER_PCICORE - pcidev = bus->pcicore.dev; + switch (dev->dev->bus_type) { +#ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: + bcma_chipco_gpio_control(&dev->dev->bdev->bus->drv_cc, mask, set); + break; #endif - gpiodev = bus->chipco.dev ? : pcidev; - if (!gpiodev) - return 0; - ssb_write32(gpiodev, B43_GPIO_CONTROL, - (ssb_read32(gpiodev, B43_GPIO_CONTROL) - & mask) | set); +#ifdef CONFIG_B43_SSB + case B43_BUS_SSB: + gpiodev = b43_ssb_gpio_dev(dev); + if (gpiodev) + ssb_write32(gpiodev, B43_GPIO_CONTROL, + (ssb_read32(gpiodev, B43_GPIO_CONTROL) + & ~mask) | set); + break; +#endif + } return 0; } @@ -2481,16 +2804,24 @@ static int b43_gpio_init(struct b43_wldev *dev) /* Turn off all GPIO stuff. Call this on module unload, for example. */ static void b43_gpio_cleanup(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->dev->bus; - struct ssb_device *gpiodev, *pcidev = NULL; +#ifdef CONFIG_B43_SSB + struct ssb_device *gpiodev; +#endif -#ifdef CONFIG_SSB_DRIVER_PCICORE - pcidev = bus->pcicore.dev; + switch (dev->dev->bus_type) { +#ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: + bcma_chipco_gpio_control(&dev->dev->bdev->bus->drv_cc, ~0, 0); + break; #endif - gpiodev = bus->chipco.dev ? : pcidev; - if (!gpiodev) - return; - ssb_write32(gpiodev, B43_GPIO_CONTROL, 0); +#ifdef CONFIG_B43_SSB + case B43_BUS_SSB: + gpiodev = b43_ssb_gpio_dev(dev); + if (gpiodev) + ssb_write32(gpiodev, B43_GPIO_CONTROL, 0); + break; +#endif + } } /* http://bcm-specs.sipsolutions.net/EnableMac */ @@ -2512,9 +2843,7 @@ void b43_mac_enable(struct b43_wldev *dev) dev->mac_suspended--; B43_WARN_ON(dev->mac_suspended < 0); if (dev->mac_suspended == 0) { - b43_write32(dev, B43_MMIO_MACCTL, - b43_read32(dev, B43_MMIO_MACCTL) - | B43_MACCTL_ENABLED); + b43_maskset32(dev, B43_MMIO_MACCTL, ~0, B43_MACCTL_ENABLED); b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_MAC_SUSPENDED); /* Commit writes */ @@ -2535,9 +2864,7 @@ void b43_mac_suspend(struct b43_wldev *dev) if (dev->mac_suspended == 0) { b43_power_saving_ctl_bits(dev, B43_PS_AWAKE); - b43_write32(dev, B43_MMIO_MACCTL, - b43_read32(dev, B43_MMIO_MACCTL) - & ~B43_MACCTL_ENABLED); + b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_ENABLED, 0); /* force pci to flush the write */ b43_read32(dev, B43_MMIO_MACCTL); for (i = 35; i; i--) { @@ -2559,6 +2886,35 @@ out: dev->mac_suspended++; } +/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MacPhyClkSet */ +void b43_mac_phy_clock_set(struct b43_wldev *dev, bool on) +{ + u32 tmp; + + switch (dev->dev->bus_type) { +#ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: + tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL); + if (on) + tmp |= B43_BCMA_IOCTL_MACPHYCLKEN; + else + tmp &= ~B43_BCMA_IOCTL_MACPHYCLKEN; + bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp); + break; +#endif +#ifdef CONFIG_B43_SSB + case B43_BUS_SSB: + tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW); + if (on) + tmp |= B43_TMSLOW_MACPHYCLKEN; + else + tmp &= ~B43_TMSLOW_MACPHYCLKEN; + ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp); + break; +#endif + } +} + static void b43_adjust_opmode(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; @@ -2575,10 +2931,10 @@ static void b43_adjust_opmode(struct b43_wldev *dev) ctl &= ~B43_MACCTL_BEACPROMISC; ctl |= B43_MACCTL_INFRA; - if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) || - b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT)) + if (b43_is_mode(wl, NL80211_IFTYPE_AP) || + b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) ctl |= B43_MACCTL_AP; - else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS)) + else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) ctl &= ~B43_MACCTL_INFRA; if (wl->filter_flags & FIF_CONTROL) @@ -2595,20 +2951,29 @@ static void b43_adjust_opmode(struct b43_wldev *dev) /* Workaround: On old hardware the HW-MAC-address-filter * doesn't work properly, so always run promisc in filter * it in software. */ - if (dev->dev->id.revision <= 4) + if (dev->dev->core_rev <= 4) ctl |= B43_MACCTL_PROMISC; b43_write32(dev, B43_MMIO_MACCTL, ctl); cfp_pretbtt = 2; if ((ctl & B43_MACCTL_INFRA) && !(ctl & B43_MACCTL_AP)) { - if (dev->dev->bus->chip_id == 0x4306 && - dev->dev->bus->chip_rev == 3) + if (dev->dev->chip_id == 0x4306 && + dev->dev->chip_rev == 3) cfp_pretbtt = 100; else cfp_pretbtt = 50; } b43_write16(dev, 0x612, cfp_pretbtt); + + /* FIXME: We don't currently implement the PMQ mechanism, + * so always disable it. If we want to implement PMQ, + * we need to enable it here (clear DISCPMQ) in AP mode. + */ + if (0 /* ctl & B43_MACCTL_AP */) + b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_DISCPMQ, 0); + else + b43_maskset32(dev, B43_MMIO_MACCTL, ~0, B43_MACCTL_DISCPMQ); } static void b43_rate_memory_write(struct b43_wldev *dev, u16 rate, int is_ofdm) @@ -2632,6 +2997,9 @@ static void b43_rate_memory_init(struct b43_wldev *dev) case B43_PHYTYPE_A: case B43_PHYTYPE_G: case B43_PHYTYPE_N: + case B43_PHYTYPE_LP: + case B43_PHYTYPE_HT: + case B43_PHYTYPE_LCN: b43_rate_memory_write(dev, B43_OFDM_RATE_6MB, 1); b43_rate_memory_write(dev, B43_OFDM_RATE_12MB, 1); b43_rate_memory_write(dev, B43_OFDM_RATE_18MB, 1); @@ -2688,9 +3056,8 @@ static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna) /* This is the opposite of b43_chip_init() */ static void b43_chip_exit(struct b43_wldev *dev) { - b43_radio_turn_off(dev, 1); + b43_phy_exit(dev); b43_gpio_cleanup(dev); - b43_lo_g_cleanup(dev); /* firmware is released later */ } @@ -2700,8 +3067,8 @@ static void b43_chip_exit(struct b43_wldev *dev) static int b43_chip_init(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - int err, tmp; - u32 value32, macctl; + int err; + u32 macctl; u16 value16; /* Initialize the MAC control */ @@ -2711,9 +3078,6 @@ static int b43_chip_init(struct b43_wldev *dev) macctl |= B43_MACCTL_INFRA; b43_write32(dev, B43_MMIO_MACCTL, macctl); - err = b43_request_firmware(dev); - if (err) - goto out; err = b43_upload_microcode(dev); if (err) goto out; /* firmware is released later */ @@ -2725,19 +3089,24 @@ static int b43_chip_init(struct b43_wldev *dev) err = b43_upload_initvals(dev); if (err) goto err_gpio_clean; - b43_radio_turn_on(dev); - b43_write16(dev, 0x03E6, 0x0000); + err = b43_upload_initvals_band(dev); + if (err) + goto err_gpio_clean; + + /* Turn the Analog on and initialize the PHY. */ + phy->ops->switch_analog(dev, 1); err = b43_phy_init(dev); if (err) - goto err_radio_off; + goto err_gpio_clean; - /* Select initial Interference Mitigation. */ - tmp = phy->interfmode; - phy->interfmode = B43_INTERFMODE_NONE; - b43_radio_set_interference_mitigation(dev, tmp); + /* Disable Interference Mitigation. */ + if (phy->ops->interf_mitigation) + phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE); - b43_set_rx_antenna(dev, B43_ANTENNA_DEFAULT); + /* Select the antennae */ + if (phy->ops->set_rx_antenna) + phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT); b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT); if (phy->type == B43_PHYTYPE_B) { @@ -2746,22 +3115,20 @@ static int b43_chip_init(struct b43_wldev *dev) b43_write16(dev, 0x005E, value16); } b43_write32(dev, 0x0100, 0x01000000); - if (dev->dev->id.revision < 5) + if (dev->dev->core_rev < 5) b43_write32(dev, 0x010C, 0x01000000); - b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) - & ~B43_MACCTL_INFRA); - b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) - | B43_MACCTL_INFRA); + b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_INFRA, 0); + b43_maskset32(dev, B43_MMIO_MACCTL, ~0, B43_MACCTL_INFRA); /* Probe Response Timeout value */ /* FIXME: Default to 0, has to be set by ioctl probably... :-/ */ - b43_shm_write16(dev, B43_SHM_SHARED, 0x0074, 0x0000); + b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRMAXTIME, 0); /* Initially set the wireless operation mode. */ b43_adjust_opmode(dev); - if (dev->dev->id.revision < 3) { + if (dev->dev->core_rev < 3) { b43_write16(dev, 0x060E, 0x0000); b43_write16(dev, 0x0610, 0x8000); b43_write16(dev, 0x0604, 0x0000); @@ -2771,27 +3138,35 @@ static int b43_chip_init(struct b43_wldev *dev) b43_write32(dev, 0x018C, 0x02000000); } b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000); - b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001DC00); + b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001FC00); b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00); b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00); b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00); b43_write32(dev, B43_MMIO_DMA4_IRQ_MASK, 0x0000DC00); b43_write32(dev, B43_MMIO_DMA5_IRQ_MASK, 0x0000DC00); - value32 = ssb_read32(dev->dev, SSB_TMSLOW); - value32 |= 0x00100000; - ssb_write32(dev->dev, SSB_TMSLOW, value32); + b43_mac_phy_clock_set(dev, true); - b43_write16(dev, B43_MMIO_POWERUP_DELAY, - dev->dev->bus->chipco.fast_pwrup_delay); + switch (dev->dev->bus_type) { +#ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: + /* FIXME: 0xE74 is quite common, but should be read from CC */ + b43_write16(dev, B43_MMIO_POWERUP_DELAY, 0xE74); + break; +#endif +#ifdef CONFIG_B43_SSB + case B43_BUS_SSB: + b43_write16(dev, B43_MMIO_POWERUP_DELAY, + dev->dev->sdev->bus->chipco.fast_pwrup_delay); + break; +#endif + } err = 0; b43dbg(dev->wl, "Chip initialized\n"); out: return err; -err_radio_off: - b43_radio_turn_off(dev, 1); err_gpio_clean: b43_gpio_cleanup(dev); return err; @@ -2799,25 +3174,13 @@ err_gpio_clean: static void b43_periodic_every60sec(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; + const struct b43_phy_operations *ops = dev->phy.ops; - if (phy->type != B43_PHYTYPE_G) - return; - if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) { - b43_mac_suspend(dev); - b43_calc_nrssi_slope(dev); - if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) { - u8 old_chan = phy->channel; - - /* VCO Calibration */ - if (old_chan >= 8) - b43_radio_selectchannel(dev, 1, 0); - else - b43_radio_selectchannel(dev, 13, 0); - b43_radio_selectchannel(dev, old_chan, 0); - } - b43_mac_enable(dev); - } + if (ops->pwork_60sec) + ops->pwork_60sec(dev); + + /* Force check the TX power emission now. */ + b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME); } static void b43_periodic_every30sec(struct b43_wldev *dev) @@ -2845,35 +3208,32 @@ static void b43_periodic_every15sec(struct b43_wldev *dev) } } - if (phy->type == B43_PHYTYPE_G) { - //TODO: update_aci_moving_average - if (phy->aci_enable && phy->aci_wlan_automatic) { - b43_mac_suspend(dev); - if (!phy->aci_enable && 1 /*TODO: not scanning? */ ) { - if (0 /*TODO: bunch of conditions */ ) { - b43_radio_set_interference_mitigation - (dev, B43_INTERFMODE_MANUALWLAN); - } - } else if (1 /*TODO*/) { - /* - if ((aci_average > 1000) && !(b43_radio_aci_scan(dev))) { - b43_radio_set_interference_mitigation(dev, - B43_INTERFMODE_NONE); - } - */ - } - b43_mac_enable(dev); - } else if (phy->interfmode == B43_INTERFMODE_NONWLAN && - phy->rev == 1) { - //TODO: implement rev1 workaround - } - } - b43_phy_xmitpower(dev); //FIXME: unless scanning? - b43_lo_g_maintanance_work(dev); - //TODO for APHY (temperature?) + if (phy->ops->pwork_15sec) + phy->ops->pwork_15sec(dev); atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); wmb(); + +#if B43_DEBUG + if (b43_debug(dev, B43_DBG_VERBOSESTATS)) { + unsigned int i; + + b43dbg(dev->wl, "Stats: %7u IRQs/sec, %7u TX/sec, %7u RX/sec\n", + dev->irq_count / 15, + dev->tx_count / 15, + dev->rx_count / 15); + dev->irq_count = 0; + dev->tx_count = 0; + dev->rx_count = 0; + for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) { + if (dev->irq_bit_count[i]) { + b43dbg(dev->wl, "Stats: %7u IRQ-%02u/sec (0x%08X)\n", + dev->irq_bit_count[i] / 15, i, (1 << i)); + dev->irq_bit_count[i] = 0; + } + } + } +#endif } static void do_periodic_work(struct b43_wldev *dev) @@ -2891,7 +3251,7 @@ static void do_periodic_work(struct b43_wldev *dev) /* Periodic work locking policy: * The whole periodic work handler is protected by * wl->mutex. If another lock is needed somewhere in the - * pwork callchain, it's aquired in-place, where it's needed. + * pwork callchain, it's acquired in-place, where it's needed. */ static void b43_periodic_work_handler(struct work_struct *work) { @@ -2915,7 +3275,7 @@ out_requeue: delay = msecs_to_jiffies(50); else delay = round_jiffies_relative(HZ * 15); - queue_delayed_work(wl->hw->workqueue, &dev->periodic_work, delay); + ieee80211_queue_delayed_work(wl->hw, &dev->periodic_work, delay); out: mutex_unlock(&wl->mutex); } @@ -2926,15 +3286,16 @@ static void b43_periodic_tasks_setup(struct b43_wldev *dev) dev->periodic_state = 0; INIT_DELAYED_WORK(work, b43_periodic_work_handler); - queue_delayed_work(dev->wl->hw->workqueue, work, 0); + ieee80211_queue_delayed_work(dev->wl->hw, work, 0); } /* Check if communication with the device works correctly. */ static int b43_validate_chipaccess(struct b43_wldev *dev) { - u32 v, backup; + u32 v, backup0, backup4; - backup = b43_shm_read32(dev, B43_SHM_SHARED, 0); + backup0 = b43_shm_read32(dev, B43_SHM_SHARED, 0); + backup4 = b43_shm_read32(dev, B43_SHM_SHARED, 4); /* Check for read/write and endianness problems. */ b43_shm_write32(dev, B43_SHM_SHARED, 0, 0x55AAAA55); @@ -2944,9 +3305,25 @@ static int b43_validate_chipaccess(struct b43_wldev *dev) if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0xAA5555AA) goto error; - b43_shm_write32(dev, B43_SHM_SHARED, 0, backup); - - if ((dev->dev->id.revision >= 3) && (dev->dev->id.revision <= 10)) { + /* Check if unaligned 32bit SHM_SHARED access works properly. + * However, don't bail out on failure, because it's noncritical. */ + b43_shm_write16(dev, B43_SHM_SHARED, 0, 0x1122); + b43_shm_write16(dev, B43_SHM_SHARED, 2, 0x3344); + b43_shm_write16(dev, B43_SHM_SHARED, 4, 0x5566); + b43_shm_write16(dev, B43_SHM_SHARED, 6, 0x7788); + if (b43_shm_read32(dev, B43_SHM_SHARED, 2) != 0x55663344) + b43warn(dev->wl, "Unaligned 32bit SHM read access is broken\n"); + b43_shm_write32(dev, B43_SHM_SHARED, 2, 0xAABBCCDD); + if (b43_shm_read16(dev, B43_SHM_SHARED, 0) != 0x1122 || + b43_shm_read16(dev, B43_SHM_SHARED, 2) != 0xCCDD || + b43_shm_read16(dev, B43_SHM_SHARED, 4) != 0xAABB || + b43_shm_read16(dev, B43_SHM_SHARED, 6) != 0x7788) + b43warn(dev->wl, "Unaligned 32bit SHM write access is broken\n"); + + b43_shm_write32(dev, B43_SHM_SHARED, 0, backup0); + b43_shm_write32(dev, B43_SHM_SHARED, 4, backup4); + + if ((dev->dev->core_rev >= 3) && (dev->dev->core_rev <= 10)) { /* The 32bit register shadows the two 16bit registers * with update sideeffects. Validate this. */ b43_write16(dev, B43_MMIO_TSF_CFP_START, 0xAAAA); @@ -2971,102 +3348,130 @@ error: static void b43_security_init(struct b43_wldev *dev) { - dev->max_nr_keys = (dev->dev->id.revision >= 5) ? 58 : 20; - B43_WARN_ON(dev->max_nr_keys > ARRAY_SIZE(dev->key)); dev->ktp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_KTP); /* KTP is a word address, but we address SHM bytewise. * So multiply by two. */ dev->ktp *= 2; - if (dev->dev->id.revision >= 5) { - /* Number of RCMTA address slots */ - b43_write16(dev, B43_MMIO_RCMTA_COUNT, dev->max_nr_keys - 8); - } + /* Number of RCMTA address slots */ + b43_write16(dev, B43_MMIO_RCMTA_COUNT, B43_NR_PAIRWISE_KEYS); + /* Clear the key memory. */ b43_clear_keys(dev); } -static int b43_rng_read(struct hwrng *rng, u32 * data) +#ifdef CONFIG_B43_HWRNG +static int b43_rng_read(struct hwrng *rng, u32 *data) { struct b43_wl *wl = (struct b43_wl *)rng->priv; - unsigned long flags; - - /* Don't take wl->mutex here, as it could deadlock with - * hwrng internal locking. It's not needed to take - * wl->mutex here, anyway. */ + struct b43_wldev *dev; + int count = -ENODEV; - spin_lock_irqsave(&wl->irq_lock, flags); - *data = b43_read16(wl->current_dev, B43_MMIO_RNG); - spin_unlock_irqrestore(&wl->irq_lock, flags); + mutex_lock(&wl->mutex); + dev = wl->current_dev; + if (likely(dev && b43_status(dev) >= B43_STAT_INITIALIZED)) { + *data = b43_read16(dev, B43_MMIO_RNG); + count = sizeof(u16); + } + mutex_unlock(&wl->mutex); - return (sizeof(u16)); + return count; } +#endif /* CONFIG_B43_HWRNG */ static void b43_rng_exit(struct b43_wl *wl) { +#ifdef CONFIG_B43_HWRNG if (wl->rng_initialized) hwrng_unregister(&wl->rng); +#endif /* CONFIG_B43_HWRNG */ } static int b43_rng_init(struct b43_wl *wl) { - int err; + int err = 0; +#ifdef CONFIG_B43_HWRNG snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name), "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy)); wl->rng.name = wl->rng_name; wl->rng.data_read = b43_rng_read; wl->rng.priv = (unsigned long)wl; - wl->rng_initialized = 1; + wl->rng_initialized = true; err = hwrng_register(&wl->rng); if (err) { - wl->rng_initialized = 0; + wl->rng_initialized = false; b43err(wl, "Failed to register the random " "number generator (%d)\n", err); } +#endif /* CONFIG_B43_HWRNG */ return err; } -static int b43_op_tx(struct ieee80211_hw *hw, - struct sk_buff *skb) +static void b43_tx_work(struct work_struct *work) { - struct b43_wl *wl = hw_to_b43_wl(hw); - struct b43_wldev *dev = wl->current_dev; - unsigned long flags; - int err; + struct b43_wl *wl = container_of(work, struct b43_wl, tx_work); + struct b43_wldev *dev; + struct sk_buff *skb; + int queue_num; + int err = 0; - if (unlikely(skb->len < 2 + 2 + 6)) { - /* Too short, this can't be a valid frame. */ - goto drop_packet; + mutex_lock(&wl->mutex); + dev = wl->current_dev; + if (unlikely(!dev || b43_status(dev) < B43_STAT_STARTED)) { + mutex_unlock(&wl->mutex); + return; } - B43_WARN_ON(skb_shinfo(skb)->nr_frags); - if (unlikely(!dev)) - goto drop_packet; - /* Transmissions on seperate queues can run concurrently. */ - read_lock_irqsave(&wl->tx_lock, flags); + for (queue_num = 0; queue_num < B43_QOS_QUEUE_NUM; queue_num++) { + while (skb_queue_len(&wl->tx_queue[queue_num])) { + skb = skb_dequeue(&wl->tx_queue[queue_num]); + if (b43_using_pio_transfers(dev)) + err = b43_pio_tx(dev, skb); + else + err = b43_dma_tx(dev, skb); + if (err == -ENOSPC) { + wl->tx_queue_stopped[queue_num] = 1; + ieee80211_stop_queue(wl->hw, queue_num); + skb_queue_head(&wl->tx_queue[queue_num], skb); + break; + } + if (unlikely(err)) + ieee80211_free_txskb(wl->hw, skb); + err = 0; + } - err = -ENODEV; - if (likely(b43_status(dev) >= B43_STAT_STARTED)) { - if (b43_using_pio_transfers(dev)) - err = b43_pio_tx(dev, skb); - else - err = b43_dma_tx(dev, skb); + if (!err) + wl->tx_queue_stopped[queue_num] = 0; } - read_unlock_irqrestore(&wl->tx_lock, flags); +#if B43_DEBUG + dev->tx_count++; +#endif + mutex_unlock(&wl->mutex); +} - if (unlikely(err)) - goto drop_packet; - return NETDEV_TX_OK; +static void b43_op_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct b43_wl *wl = hw_to_b43_wl(hw); + + if (unlikely(skb->len < 2 + 2 + 6)) { + /* Too short, this can't be a valid frame. */ + ieee80211_free_txskb(hw, skb); + return; + } + B43_WARN_ON(skb_shinfo(skb)->nr_frags); -drop_packet: - /* We can not transmit this packet. Drop it. */ - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; + skb_queue_tail(&wl->tx_queue[skb->queue_mapping], skb); + if (!wl->tx_queue_stopped[skb->queue_mapping]) { + ieee80211_queue_work(wl->hw, &wl->tx_work); + } else { + ieee80211_stop_queue(wl->hw, skb->queue_mapping); + } } -/* Locking: wl->irq_lock */ static void b43_qos_params_upload(struct b43_wldev *dev, const struct ieee80211_tx_queue_params *p, u16 shm_offset) @@ -3075,6 +3480,9 @@ static void b43_qos_params_upload(struct b43_wldev *dev, int bslots, tmp; unsigned int i; + if (!dev->qos_enabled) + return; + bslots = b43_read16(dev, B43_MMIO_RNG) & p->cw_min; memset(¶ms, 0, sizeof(params)); @@ -3104,36 +3512,34 @@ static void b43_qos_params_upload(struct b43_wldev *dev, } } -/* Update the QOS parameters in hardware. */ -static void b43_qos_update(struct b43_wldev *dev) +/* Mapping of mac80211 queue numbers to b43 QoS SHM offsets. */ +static const u16 b43_qos_shm_offsets[] = { + /* [mac80211-queue-nr] = SHM_OFFSET, */ + [0] = B43_QOS_VOICE, + [1] = B43_QOS_VIDEO, + [2] = B43_QOS_BESTEFFORT, + [3] = B43_QOS_BACKGROUND, +}; + +/* Update all QOS parameters in hardware. */ +static void b43_qos_upload_all(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; struct b43_qos_params *params; - unsigned long flags; unsigned int i; - /* Mapping of mac80211 queues to b43 SHM offsets. */ - static const u16 qos_shm_offsets[] = { - [0] = B43_QOS_VOICE, - [1] = B43_QOS_VIDEO, - [2] = B43_QOS_BESTEFFORT, - [3] = B43_QOS_BACKGROUND, - }; - BUILD_BUG_ON(ARRAY_SIZE(qos_shm_offsets) != ARRAY_SIZE(wl->qos_params)); + if (!dev->qos_enabled) + return; - b43_mac_suspend(dev); - spin_lock_irqsave(&wl->irq_lock, flags); + BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != + ARRAY_SIZE(wl->qos_params)); + b43_mac_suspend(dev); for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) { params = &(wl->qos_params[i]); - if (params->need_hw_update) { - b43_qos_params_upload(dev, &(params->p), - qos_shm_offsets[i]); - params->need_hw_update = 0; - } + b43_qos_params_upload(dev, &(params->p), + b43_qos_shm_offsets[i]); } - - spin_unlock_irqrestore(&wl->irq_lock, flags); b43_mac_enable(dev); } @@ -3142,52 +3548,77 @@ static void b43_qos_clear(struct b43_wl *wl) struct b43_qos_params *params; unsigned int i; + /* Initialize QoS parameters to sane defaults. */ + + BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != + ARRAY_SIZE(wl->qos_params)); + for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) { params = &(wl->qos_params[i]); - memset(&(params->p), 0, sizeof(params->p)); - params->p.aifs = -1; - params->need_hw_update = 1; + switch (b43_qos_shm_offsets[i]) { + case B43_QOS_VOICE: + params->p.txop = 0; + params->p.aifs = 2; + params->p.cw_min = 0x0001; + params->p.cw_max = 0x0001; + break; + case B43_QOS_VIDEO: + params->p.txop = 0; + params->p.aifs = 2; + params->p.cw_min = 0x0001; + params->p.cw_max = 0x0001; + break; + case B43_QOS_BESTEFFORT: + params->p.txop = 0; + params->p.aifs = 3; + params->p.cw_min = 0x0001; + params->p.cw_max = 0x03FF; + break; + case B43_QOS_BACKGROUND: + params->p.txop = 0; + params->p.aifs = 7; + params->p.cw_min = 0x0001; + params->p.cw_max = 0x03FF; + break; + default: + B43_WARN_ON(1); + } } } /* Initialize the core's QOS capabilities */ static void b43_qos_init(struct b43_wldev *dev) { - struct b43_wl *wl = dev->wl; - unsigned int i; + if (!dev->qos_enabled) { + /* Disable QOS support. */ + b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_EDCF); + b43_write16(dev, B43_MMIO_IFSCTL, + b43_read16(dev, B43_MMIO_IFSCTL) + & ~B43_MMIO_IFSCTL_USE_EDCF); + b43dbg(dev->wl, "QoS disabled\n"); + return; + } /* Upload the current QOS parameters. */ - for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) - wl->qos_params[i].need_hw_update = 1; - b43_qos_update(dev); + b43_qos_upload_all(dev); /* Enable QOS support. */ b43_hf_write(dev, b43_hf_read(dev) | B43_HF_EDCF); b43_write16(dev, B43_MMIO_IFSCTL, b43_read16(dev, B43_MMIO_IFSCTL) | B43_MMIO_IFSCTL_USE_EDCF); + b43dbg(dev->wl, "QoS enabled\n"); } -static void b43_qos_update_work(struct work_struct *work) -{ - struct b43_wl *wl = container_of(work, struct b43_wl, qos_update_work); - struct b43_wldev *dev; - - mutex_lock(&wl->mutex); - dev = wl->current_dev; - if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) - b43_qos_update(dev); - mutex_unlock(&wl->mutex); -} - -static int b43_op_conf_tx(struct ieee80211_hw *hw, u16 _queue, +static int b43_op_conf_tx(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, u16 _queue, const struct ieee80211_tx_queue_params *params) { struct b43_wl *wl = hw_to_b43_wl(hw); - unsigned long flags; + struct b43_wldev *dev; unsigned int queue = (unsigned int)_queue; - struct b43_qos_params *p; + int err = -ENODEV; if (queue >= ARRAY_SIZE(wl->qos_params)) { /* Queue not available or don't support setting @@ -3195,38 +3626,24 @@ static int b43_op_conf_tx(struct ieee80211_hw *hw, u16 _queue, * confuse mac80211. */ return 0; } + BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != + ARRAY_SIZE(wl->qos_params)); - spin_lock_irqsave(&wl->irq_lock, flags); - p = &(wl->qos_params[queue]); - memcpy(&(p->p), params, sizeof(p->p)); - p->need_hw_update = 1; - spin_unlock_irqrestore(&wl->irq_lock, flags); - - queue_work(hw->workqueue, &wl->qos_update_work); + mutex_lock(&wl->mutex); + dev = wl->current_dev; + if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED))) + goto out_unlock; - return 0; -} + memcpy(&(wl->qos_params[queue].p), params, sizeof(*params)); + b43_mac_suspend(dev); + b43_qos_params_upload(dev, &(wl->qos_params[queue].p), + b43_qos_shm_offsets[queue]); + b43_mac_enable(dev); + err = 0; -static int b43_op_get_tx_stats(struct ieee80211_hw *hw, - struct ieee80211_tx_queue_stats *stats) -{ - struct b43_wl *wl = hw_to_b43_wl(hw); - struct b43_wldev *dev = wl->current_dev; - unsigned long flags; - int err = -ENODEV; +out_unlock: + mutex_unlock(&wl->mutex); - if (!dev) - goto out; - spin_lock_irqsave(&wl->irq_lock, flags); - if (likely(b43_status(dev) >= B43_STAT_STARTED)) { - if (b43_using_pio_transfers(dev)) - b43_pio_get_tx_stats(dev, stats); - else - b43_dma_get_tx_stats(dev, stats); - err = 0; - } - spin_unlock_irqrestore(&wl->irq_lock, flags); -out: return err; } @@ -3234,35 +3651,49 @@ static int b43_op_get_stats(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats) { struct b43_wl *wl = hw_to_b43_wl(hw); - unsigned long flags; - spin_lock_irqsave(&wl->irq_lock, flags); + mutex_lock(&wl->mutex); memcpy(stats, &wl->ieee_stats, sizeof(*stats)); - spin_unlock_irqrestore(&wl->irq_lock, flags); + mutex_unlock(&wl->mutex); return 0; } -static void b43_put_phy_into_reset(struct b43_wldev *dev) +static u64 b43_op_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) +{ + struct b43_wl *wl = hw_to_b43_wl(hw); + struct b43_wldev *dev; + u64 tsf; + + mutex_lock(&wl->mutex); + dev = wl->current_dev; + + if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) + b43_tsf_read(dev, &tsf); + else + tsf = 0; + + mutex_unlock(&wl->mutex); + + return tsf; +} + +static void b43_op_set_tsf(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, u64 tsf) { - struct ssb_device *sdev = dev->dev; - u32 tmslow; + struct b43_wl *wl = hw_to_b43_wl(hw); + struct b43_wldev *dev; - tmslow = ssb_read32(sdev, SSB_TMSLOW); - tmslow &= ~B43_TMSLOW_GMODE; - tmslow |= B43_TMSLOW_PHYRESET; - tmslow |= SSB_TMSLOW_FGC; - ssb_write32(sdev, SSB_TMSLOW, tmslow); - msleep(1); + mutex_lock(&wl->mutex); + dev = wl->current_dev; - tmslow = ssb_read32(sdev, SSB_TMSLOW); - tmslow &= ~SSB_TMSLOW_FGC; - tmslow |= B43_TMSLOW_PHYRESET; - ssb_write32(sdev, SSB_TMSLOW, tmslow); - msleep(1); + if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) + b43_tsf_write(dev, tsf); + + mutex_unlock(&wl->mutex); } -static const char * band_to_string(enum ieee80211_band band) +static const char *band_to_string(enum ieee80211_band band) { switch (band) { case IEEE80211_BAND_5GHZ: @@ -3277,166 +3708,162 @@ static const char * band_to_string(enum ieee80211_band band) } /* Expects wl->mutex locked */ -static int b43_switch_band(struct b43_wl *wl, struct ieee80211_channel *chan) +static int b43_switch_band(struct b43_wldev *dev, + struct ieee80211_channel *chan) { - struct b43_wldev *up_dev = NULL; - struct b43_wldev *down_dev; - struct b43_wldev *d; - int err; + struct b43_phy *phy = &dev->phy; bool gmode; - int prev_status; + u32 tmp; - /* Find a device and PHY which supports the band. */ - list_for_each_entry(d, &wl->devlist, list) { - switch (chan->band) { - case IEEE80211_BAND_5GHZ: - if (d->phy.supports_5ghz) { - up_dev = d; - gmode = 0; - } - break; - case IEEE80211_BAND_2GHZ: - if (d->phy.supports_2ghz) { - up_dev = d; - gmode = 1; - } - break; - default: - B43_WARN_ON(1); - return -EINVAL; - } - if (up_dev) - break; + switch (chan->band) { + case IEEE80211_BAND_5GHZ: + gmode = false; + break; + case IEEE80211_BAND_2GHZ: + gmode = true; + break; + default: + B43_WARN_ON(1); + return -EINVAL; } - if (!up_dev) { - b43err(wl, "Could not find a device for %s-GHz band operation\n", + + if (!((gmode && phy->supports_2ghz) || + (!gmode && phy->supports_5ghz))) { + b43err(dev->wl, "This device doesn't support %s-GHz band\n", band_to_string(chan->band)); return -ENODEV; } - if ((up_dev == wl->current_dev) && - (!!wl->current_dev->phy.gmode == !!gmode)) { + + if (!!phy->gmode == !!gmode) { /* This device is already running. */ return 0; } - b43dbg(wl, "Switching to %s-GHz band\n", - band_to_string(chan->band)); - down_dev = wl->current_dev; - prev_status = b43_status(down_dev); - /* Shutdown the currently running core. */ - if (prev_status >= B43_STAT_STARTED) - b43_wireless_core_stop(down_dev); - if (prev_status >= B43_STAT_INITIALIZED) - b43_wireless_core_exit(down_dev); + b43dbg(dev->wl, "Switching to %s GHz band\n", + band_to_string(chan->band)); - if (down_dev != up_dev) { - /* We switch to a different core, so we put PHY into - * RESET on the old core. */ - b43_put_phy_into_reset(down_dev); + /* Some new devices don't need disabling radio for band switching */ + if (!(phy->type == B43_PHYTYPE_N && phy->rev >= 3)) + b43_software_rfkill(dev, true); + + phy->gmode = gmode; + b43_phy_put_into_reset(dev); + switch (dev->dev->bus_type) { +#ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: + tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL); + if (gmode) + tmp |= B43_BCMA_IOCTL_GMODE; + else + tmp &= ~B43_BCMA_IOCTL_GMODE; + bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp); + break; +#endif +#ifdef CONFIG_B43_SSB + case B43_BUS_SSB: + tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW); + if (gmode) + tmp |= B43_TMSLOW_GMODE; + else + tmp &= ~B43_TMSLOW_GMODE; + ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp); + break; +#endif } + b43_phy_take_out_of_reset(dev); - /* Now start the new core. */ - up_dev->phy.gmode = gmode; - if (prev_status >= B43_STAT_INITIALIZED) { - err = b43_wireless_core_init(up_dev); - if (err) { - b43err(wl, "Fatal: Could not initialize device for " - "selected %s-GHz band\n", - band_to_string(chan->band)); - goto init_failure; - } - } - if (prev_status >= B43_STAT_STARTED) { - err = b43_wireless_core_start(up_dev); - if (err) { - b43err(wl, "Fatal: Coult not start device for " - "selected %s-GHz band\n", - band_to_string(chan->band)); - b43_wireless_core_exit(up_dev); - goto init_failure; - } - } - B43_WARN_ON(b43_status(up_dev) != prev_status); + b43_upload_initvals_band(dev); - wl->current_dev = up_dev; + b43_phy_init(dev); return 0; -init_failure: - /* Whoops, failed to init the new core. No core is operating now. */ - wl->current_dev = NULL; - return err; } -static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) +/* Write the short and long frame retry limit values. */ +static void b43_set_retry_limits(struct b43_wldev *dev, + unsigned int short_retry, + unsigned int long_retry) +{ + /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing + * the chip-internal counter. */ + short_retry = min(short_retry, (unsigned int)0xF); + long_retry = min(long_retry, (unsigned int)0xF); + + b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT, + short_retry); + b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT, + long_retry); +} + +static int b43_op_config(struct ieee80211_hw *hw, u32 changed) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev; struct b43_phy *phy; - unsigned long flags; + struct ieee80211_conf *conf = &hw->conf; int antenna; int err = 0; - u32 savedirqs; + bool reload_bss = false; mutex_lock(&wl->mutex); + dev = wl->current_dev; + + b43_mac_suspend(dev); + /* Switch the band (if necessary). This might change the active core. */ - err = b43_switch_band(wl, conf->channel); + err = b43_switch_band(dev, conf->chandef.chan); if (err) goto out_unlock_mutex; - dev = wl->current_dev; - phy = &dev->phy; - /* Disable IRQs while reconfiguring the device. - * This makes it possible to drop the spinlock throughout - * the reconfiguration process. */ - spin_lock_irqsave(&wl->irq_lock, flags); - if (b43_status(dev) < B43_STAT_STARTED) { - spin_unlock_irqrestore(&wl->irq_lock, flags); - goto out_unlock_mutex; + /* Need to reload all settings if the core changed */ + if (dev != wl->current_dev) { + dev = wl->current_dev; + changed = ~0; + reload_bss = true; } - savedirqs = b43_interrupt_disable(dev, B43_IRQ_ALL); - spin_unlock_irqrestore(&wl->irq_lock, flags); - b43_synchronize_irq(dev); + + phy = &dev->phy; + + if (conf_is_ht(conf)) + phy->is_40mhz = + (conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf)); + else + phy->is_40mhz = false; + + if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) + b43_set_retry_limits(dev, conf->short_frame_max_tx_count, + conf->long_frame_max_tx_count); + changed &= ~IEEE80211_CONF_CHANGE_RETRY_LIMITS; + if (!changed) + goto out_mac_enable; /* Switch to the requested channel. * The firmware takes care of races with the TX handler. */ - if (conf->channel->hw_value != phy->channel) - b43_radio_selectchannel(dev, conf->channel->hw_value, 0); - - /* Enable/Disable ShortSlot timing. */ - if ((!!(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)) != - dev->short_slot) { - B43_WARN_ON(phy->type != B43_PHYTYPE_G); - if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) - b43_short_slot_timing_enable(dev); - else - b43_short_slot_timing_disable(dev); - } + if (conf->chandef.chan->hw_value != phy->channel) + b43_switch_channel(dev, conf->chandef.chan->hw_value); - dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_RADIOTAP); + dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_MONITOR); /* Adjust the desired TX power level. */ if (conf->power_level != 0) { - if (conf->power_level != phy->power_level) { - phy->power_level = conf->power_level; - b43_phy_xmitpower(dev); + if (conf->power_level != phy->desired_txpower) { + phy->desired_txpower = conf->power_level; + b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME | + B43_TXPWR_IGNORE_TSSI); } } /* Antennas for RX and management frame TX. */ - antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_tx); + antenna = B43_ANTENNA_DEFAULT; b43_mgmtframe_txantenna(dev, antenna); - antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_rx); - b43_set_rx_antenna(dev, antenna); + antenna = B43_ANTENNA_DEFAULT; + if (phy->ops->set_rx_antenna) + phy->ops->set_rx_antenna(dev, antenna); - /* Update templates for AP/mesh mode. */ - if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) || - b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT)) - b43_set_beacon_int(dev, conf->beacon_int); - - if (!!conf->radio_enabled != phy->radio_on) { - if (conf->radio_enabled) { - b43_radio_turn_on(dev); + if (wl->radio_enabled != phy->radio_on) { + if (wl->radio_enabled) { + b43_software_rfkill(dev, false); b43info(dev->wl, "Radio turned on by software\n"); if (!dev->radio_hw_enable) { b43info(dev->wl, "The hardware RF-kill button " @@ -3444,45 +3871,162 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) "Press the button to turn it on.\n"); } } else { - b43_radio_turn_off(dev, 0); + b43_software_rfkill(dev, true); b43info(dev->wl, "Radio turned off by software\n"); } } - spin_lock_irqsave(&wl->irq_lock, flags); - b43_interrupt_enable(dev, savedirqs); - mmiowb(); - spin_unlock_irqrestore(&wl->irq_lock, flags); - out_unlock_mutex: +out_mac_enable: + b43_mac_enable(dev); +out_unlock_mutex: mutex_unlock(&wl->mutex); + if (wl->vif && reload_bss) + b43_op_bss_info_changed(hw, wl->vif, &wl->vif->bss_conf, ~0); + return err; } +static void b43_update_basic_rates(struct b43_wldev *dev, u32 brates) +{ + struct ieee80211_supported_band *sband = + dev->wl->hw->wiphy->bands[b43_current_band(dev->wl)]; + struct ieee80211_rate *rate; + int i; + u16 basic, direct, offset, basic_offset, rateptr; + + for (i = 0; i < sband->n_bitrates; i++) { + rate = &sband->bitrates[i]; + + if (b43_is_cck_rate(rate->hw_value)) { + direct = B43_SHM_SH_CCKDIRECT; + basic = B43_SHM_SH_CCKBASIC; + offset = b43_plcp_get_ratecode_cck(rate->hw_value); + offset &= 0xF; + } else { + direct = B43_SHM_SH_OFDMDIRECT; + basic = B43_SHM_SH_OFDMBASIC; + offset = b43_plcp_get_ratecode_ofdm(rate->hw_value); + offset &= 0xF; + } + + rate = ieee80211_get_response_rate(sband, brates, rate->bitrate); + + if (b43_is_cck_rate(rate->hw_value)) { + basic_offset = b43_plcp_get_ratecode_cck(rate->hw_value); + basic_offset &= 0xF; + } else { + basic_offset = b43_plcp_get_ratecode_ofdm(rate->hw_value); + basic_offset &= 0xF; + } + + /* + * Get the pointer that we need to point to + * from the direct map + */ + rateptr = b43_shm_read16(dev, B43_SHM_SHARED, + direct + 2 * basic_offset); + /* and write it to the basic map */ + b43_shm_write16(dev, B43_SHM_SHARED, basic + 2 * offset, + rateptr); + } +} + +static void b43_op_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *conf, + u32 changed) +{ + struct b43_wl *wl = hw_to_b43_wl(hw); + struct b43_wldev *dev; + + mutex_lock(&wl->mutex); + + dev = wl->current_dev; + if (!dev || b43_status(dev) < B43_STAT_STARTED) + goto out_unlock_mutex; + + B43_WARN_ON(wl->vif != vif); + + if (changed & BSS_CHANGED_BSSID) { + if (conf->bssid) + memcpy(wl->bssid, conf->bssid, ETH_ALEN); + else + memset(wl->bssid, 0, ETH_ALEN); + } + + if (b43_status(dev) >= B43_STAT_INITIALIZED) { + if (changed & BSS_CHANGED_BEACON && + (b43_is_mode(wl, NL80211_IFTYPE_AP) || + b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) || + b43_is_mode(wl, NL80211_IFTYPE_ADHOC))) + b43_update_templates(wl); + + if (changed & BSS_CHANGED_BSSID) + b43_write_mac_bssid_templates(dev); + } + + b43_mac_suspend(dev); + + /* Update templates for AP/mesh mode. */ + if (changed & BSS_CHANGED_BEACON_INT && + (b43_is_mode(wl, NL80211_IFTYPE_AP) || + b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) || + b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) && + conf->beacon_int) + b43_set_beacon_int(dev, conf->beacon_int); + + if (changed & BSS_CHANGED_BASIC_RATES) + b43_update_basic_rates(dev, conf->basic_rates); + + if (changed & BSS_CHANGED_ERP_SLOT) { + if (conf->use_short_slot) + b43_short_slot_timing_enable(dev); + else + b43_short_slot_timing_disable(dev); + } + + b43_mac_enable(dev); +out_unlock_mutex: + mutex_unlock(&wl->mutex); +} + static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - const u8 *local_addr, const u8 *addr, - struct ieee80211_key_conf *key) + struct ieee80211_vif *vif, struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev; - unsigned long flags; u8 algorithm; u8 index; int err; - DECLARE_MAC_BUF(mac); + static const u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; if (modparam_nohwcrypt) return -ENOSPC; /* User disabled HW-crypto */ + if ((vif->type == NL80211_IFTYPE_ADHOC || + vif->type == NL80211_IFTYPE_MESH_POINT) && + (key->cipher == WLAN_CIPHER_SUITE_TKIP || + key->cipher == WLAN_CIPHER_SUITE_CCMP) && + !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { + /* + * For now, disable hw crypto for the RSN IBSS group keys. This + * could be optimized in the future, but until that gets + * implemented, use of software crypto for group addressed + * frames is a acceptable to allow RSN IBSS to be used. + */ + return -EOPNOTSUPP; + } + mutex_lock(&wl->mutex); - spin_lock_irqsave(&wl->irq_lock, flags); dev = wl->current_dev; err = -ENODEV; if (!dev || b43_status(dev) < B43_STAT_INITIALIZED) goto out_unlock; - if (dev->fw.pcm_request_failed) { + if (dev->fw.pcm_request_failed || !dev->hwcrypto_enabled) { /* We don't have firmware for the crypto engine. * Must use software-crypto. */ err = -EOPNOTSUPP; @@ -3490,17 +4034,17 @@ static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, } err = -EINVAL; - switch (key->alg) { - case ALG_WEP: - if (key->keylen == 5) - algorithm = B43_SEC_ALGO_WEP40; - else - algorithm = B43_SEC_ALGO_WEP104; + switch (key->cipher) { + case WLAN_CIPHER_SUITE_WEP40: + algorithm = B43_SEC_ALGO_WEP40; + break; + case WLAN_CIPHER_SUITE_WEP104: + algorithm = B43_SEC_ALGO_WEP104; break; - case ALG_TKIP: + case WLAN_CIPHER_SUITE_TKIP: algorithm = B43_SEC_ALGO_TKIP; break; - case ALG_CCMP: + case WLAN_CIPHER_SUITE_CCMP: algorithm = B43_SEC_ALGO_AES; break; default: @@ -3513,23 +4057,27 @@ static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, switch (cmd) { case SET_KEY: - if (algorithm == B43_SEC_ALGO_TKIP) { - /* FIXME: No TKIP hardware encryption for now. */ + if (algorithm == B43_SEC_ALGO_TKIP && + (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE) || + !modparam_hwtkip)) { + /* We support only pairwise key */ err = -EOPNOTSUPP; goto out_unlock; } - if (is_broadcast_ether_addr(addr)) { - /* addr is FF:FF:FF:FF:FF:FF for default keys */ + if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) { + if (WARN_ON(!sta)) { + err = -EOPNOTSUPP; + goto out_unlock; + } + /* Pairwise key with an assigned MAC address. */ + err = b43_key_write(dev, -1, algorithm, + key->key, key->keylen, + sta->addr, key); + } else { + /* Group key */ err = b43_key_write(dev, index, algorithm, key->key, key->keylen, NULL, key); - } else { - /* - * either pairwise key or address is 00:00:00:00:00:00 - * for transmit-only keys - */ - err = b43_key_write(dev, -1, algorithm, - key->key, key->keylen, addr, key); } if (err) goto out_unlock; @@ -3542,6 +4090,8 @@ static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, b43_hf_read(dev) & ~B43_HF_USEDEFKEYS); } key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + if (algorithm == B43_SEC_ALGO_TKIP) + key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; break; case DISABLE_KEY: { err = b43_key_clear(dev, key->hw_key_idx); @@ -3552,32 +4102,34 @@ static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, default: B43_WARN_ON(1); } + out_unlock: - spin_unlock_irqrestore(&wl->irq_lock, flags); - mutex_unlock(&wl->mutex); if (!err) { b43dbg(wl, "%s hardware based encryption for keyidx: %d, " - "mac: %s\n", + "mac: %pM\n", cmd == SET_KEY ? "Using" : "Disabling", key->keyidx, - print_mac(mac, addr)); + sta ? sta->addr : bcast_addr); + b43_dump_keymemory(dev); } + mutex_unlock(&wl->mutex); + return err; } static void b43_op_configure_filter(struct ieee80211_hw *hw, unsigned int changed, unsigned int *fflags, - int mc_count, struct dev_addr_list *mc_list) + u64 multicast) { struct b43_wl *wl = hw_to_b43_wl(hw); - struct b43_wldev *dev = wl->current_dev; - unsigned long flags; + struct b43_wldev *dev; + mutex_lock(&wl->mutex); + dev = wl->current_dev; if (!dev) { *fflags = 0; - return; + goto out_unlock; } - spin_lock_irqsave(&wl->irq_lock, flags); *fflags &= FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | @@ -3598,78 +4150,87 @@ static void b43_op_configure_filter(struct ieee80211_hw *hw, if (changed && b43_status(dev) >= B43_STAT_INITIALIZED) b43_adjust_opmode(dev); - spin_unlock_irqrestore(&wl->irq_lock, flags); -} -static int b43_op_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct b43_wl *wl = hw_to_b43_wl(hw); - struct b43_wldev *dev = wl->current_dev; - unsigned long flags; - - if (!dev) - return -ENODEV; - mutex_lock(&wl->mutex); - spin_lock_irqsave(&wl->irq_lock, flags); - B43_WARN_ON(wl->vif != vif); - if (conf->bssid) - memcpy(wl->bssid, conf->bssid, ETH_ALEN); - else - memset(wl->bssid, 0, ETH_ALEN); - if (b43_status(dev) >= B43_STAT_INITIALIZED) { - if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) || - b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT)) { - B43_WARN_ON(vif->type != wl->if_type); - if (conf->changed & IEEE80211_IFCC_SSID) - b43_set_ssid(dev, conf->ssid, conf->ssid_len); - if (conf->changed & IEEE80211_IFCC_BEACON) - b43_update_templates(wl); - } else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS)) { - if (conf->changed & IEEE80211_IFCC_BEACON) - b43_update_templates(wl); - } - b43_write_mac_bssid_templates(dev); - } - spin_unlock_irqrestore(&wl->irq_lock, flags); +out_unlock: mutex_unlock(&wl->mutex); - - return 0; } -/* Locking: wl->mutex */ -static void b43_wireless_core_stop(struct b43_wldev *dev) +/* Locking: wl->mutex + * Returns the current dev. This might be different from the passed in dev, + * because the core might be gone away while we unlocked the mutex. */ +static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev) { - struct b43_wl *wl = dev->wl; - unsigned long flags; + struct b43_wl *wl; + struct b43_wldev *orig_dev; + u32 mask; + int queue_num; - if (b43_status(dev) < B43_STAT_STARTED) - return; + if (!dev) + return NULL; + wl = dev->wl; +redo: + if (!dev || b43_status(dev) < B43_STAT_STARTED) + return dev; - /* Disable and sync interrupts. We must do this before than - * setting the status to INITIALIZED, as the interrupt handler - * won't care about IRQs then. */ - spin_lock_irqsave(&wl->irq_lock, flags); - dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL); - b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* flush */ - spin_unlock_irqrestore(&wl->irq_lock, flags); - b43_synchronize_irq(dev); + /* Cancel work. Unlock to avoid deadlocks. */ + mutex_unlock(&wl->mutex); + cancel_delayed_work_sync(&dev->periodic_work); + cancel_work_sync(&wl->tx_work); + mutex_lock(&wl->mutex); + dev = wl->current_dev; + if (!dev || b43_status(dev) < B43_STAT_STARTED) { + /* Whoops, aliens ate up the device while we were unlocked. */ + return dev; + } - write_lock_irqsave(&wl->tx_lock, flags); + /* Disable interrupts on the device. */ b43_set_status(dev, B43_STAT_INITIALIZED); - write_unlock_irqrestore(&wl->tx_lock, flags); - - b43_pio_stop(dev); + if (b43_bus_host_is_sdio(dev->dev)) { + /* wl->mutex is locked. That is enough. */ + b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0); + b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */ + } else { + spin_lock_irq(&wl->hardirq_lock); + b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0); + b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */ + spin_unlock_irq(&wl->hardirq_lock); + } + /* Synchronize and free the interrupt handlers. Unlock to avoid deadlocks. */ + orig_dev = dev; mutex_unlock(&wl->mutex); - /* Must unlock as it would otherwise deadlock. No races here. - * Cancel the possibly running self-rearming periodic work. */ - cancel_delayed_work_sync(&dev->periodic_work); + if (b43_bus_host_is_sdio(dev->dev)) { + b43_sdio_free_irq(dev); + } else { + synchronize_irq(dev->dev->irq); + free_irq(dev->dev->irq, dev); + } mutex_lock(&wl->mutex); + dev = wl->current_dev; + if (!dev) + return dev; + if (dev != orig_dev) { + if (b43_status(dev) >= B43_STAT_STARTED) + goto redo; + return dev; + } + mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); + B43_WARN_ON(mask != 0xFFFFFFFF && mask); + + /* Drain all TX queues. */ + for (queue_num = 0; queue_num < B43_QOS_QUEUE_NUM; queue_num++) { + while (skb_queue_len(&wl->tx_queue[queue_num])) { + struct sk_buff *skb; + + skb = skb_dequeue(&wl->tx_queue[queue_num]); + ieee80211_free_txskb(wl->hw, skb); + } + } b43_mac_suspend(dev); - free_irq(dev->dev->irq, dev); + b43_leds_exit(dev); b43dbg(wl, "Wireless interface stopped\n"); + + return dev; } /* Locking: wl->mutex */ @@ -3680,28 +4241,70 @@ static int b43_wireless_core_start(struct b43_wldev *dev) B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED); drain_txstatus_queue(dev); - err = request_irq(dev->dev->irq, b43_interrupt_handler, - IRQF_SHARED, KBUILD_MODNAME, dev); - if (err) { - b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq); - goto out; + if (b43_bus_host_is_sdio(dev->dev)) { + err = b43_sdio_request_irq(dev, b43_sdio_interrupt_handler); + if (err) { + b43err(dev->wl, "Cannot request SDIO IRQ\n"); + goto out; + } + } else { + err = request_threaded_irq(dev->dev->irq, b43_interrupt_handler, + b43_interrupt_thread_handler, + IRQF_SHARED, KBUILD_MODNAME, dev); + if (err) { + b43err(dev->wl, "Cannot request IRQ-%d\n", + dev->dev->irq); + goto out; + } } /* We are ready to run. */ + ieee80211_wake_queues(dev->wl->hw); b43_set_status(dev, B43_STAT_STARTED); /* Start data flow (TX/RX). */ b43_mac_enable(dev); - b43_interrupt_enable(dev, dev->irq_savedstate); + b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask); - /* Start maintainance work */ + /* Start maintenance work */ b43_periodic_tasks_setup(dev); + b43_leds_init(dev); + b43dbg(dev->wl, "Wireless interface started\n"); - out: +out: return err; } +static char *b43_phy_name(struct b43_wldev *dev, u8 phy_type) +{ + switch (phy_type) { + case B43_PHYTYPE_A: + return "A"; + case B43_PHYTYPE_B: + return "B"; + case B43_PHYTYPE_G: + return "G"; + case B43_PHYTYPE_N: + return "N"; + case B43_PHYTYPE_LP: + return "LP"; + case B43_PHYTYPE_SSLPN: + return "SSLPN"; + case B43_PHYTYPE_HT: + return "HT"; + case B43_PHYTYPE_LCN: + return "LCN"; + case B43_PHYTYPE_LCNXN: + return "LCNXN"; + case B43_PHYTYPE_LCN40: + return "LCN40"; + case B43_PHYTYPE_AC: + return "AC"; + } + return "UNKNOWN"; +} + /* Get PHY and RADIO versioning numbers */ static int b43_phy_versioning(struct b43_wldev *dev) { @@ -3734,41 +4337,79 @@ static int b43_phy_versioning(struct b43_wldev *dev) if (phy_rev > 9) unsupported = 1; break; -#ifdef CONFIG_B43_NPHY +#ifdef CONFIG_B43_PHY_N case B43_PHYTYPE_N: + if (phy_rev > 9) + unsupported = 1; + break; +#endif +#ifdef CONFIG_B43_PHY_LP + case B43_PHYTYPE_LP: + if (phy_rev > 2) + unsupported = 1; + break; +#endif +#ifdef CONFIG_B43_PHY_HT + case B43_PHYTYPE_HT: + if (phy_rev > 1) + unsupported = 1; + break; +#endif +#ifdef CONFIG_B43_PHY_LCN + case B43_PHYTYPE_LCN: if (phy_rev > 1) unsupported = 1; break; #endif default: unsupported = 1; - }; + } if (unsupported) { - b43err(dev->wl, "FOUND UNSUPPORTED PHY " - "(Analog %u, Type %u, Revision %u)\n", - analog_type, phy_type, phy_rev); + b43err(dev->wl, "FOUND UNSUPPORTED PHY (Analog %u, Type %d (%s), Revision %u)\n", + analog_type, phy_type, b43_phy_name(dev, phy_type), + phy_rev); return -EOPNOTSUPP; } - b43dbg(dev->wl, "Found PHY: Analog %u, Type %u, Revision %u\n", - analog_type, phy_type, phy_rev); + b43info(dev->wl, "Found PHY: Analog %u, Type %d (%s), Revision %u\n", + analog_type, phy_type, b43_phy_name(dev, phy_type), phy_rev); /* Get RADIO versioning */ - if (dev->dev->bus->chip_id == 0x4317) { - if (dev->dev->bus->chip_rev == 0) - tmp = 0x3205017F; - else if (dev->dev->bus->chip_rev == 1) - tmp = 0x4205017F; - else - tmp = 0x5205017F; + if (dev->dev->core_rev >= 24) { + u16 radio24[3]; + + for (tmp = 0; tmp < 3; tmp++) { + b43_write16(dev, B43_MMIO_RADIO24_CONTROL, tmp); + radio24[tmp] = b43_read16(dev, B43_MMIO_RADIO24_DATA); + } + + /* Broadcom uses "id" for our "ver" and has separated "ver" */ + /* radio_ver = (radio24[0] & 0xF0) >> 4; */ + + radio_manuf = 0x17F; + radio_ver = (radio24[2] << 8) | radio24[1]; + radio_rev = (radio24[0] & 0xF); } else { - b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID); - tmp = b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); - b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID); - tmp |= (u32)b43_read16(dev, B43_MMIO_RADIO_DATA_HIGH) << 16; - } - radio_manuf = (tmp & 0x00000FFF); - radio_ver = (tmp & 0x0FFFF000) >> 12; - radio_rev = (tmp & 0xF0000000) >> 28; + if (dev->dev->chip_id == 0x4317) { + if (dev->dev->chip_rev == 0) + tmp = 0x3205017F; + else if (dev->dev->chip_rev == 1) + tmp = 0x4205017F; + else + tmp = 0x5205017F; + } else { + b43_write16(dev, B43_MMIO_RADIO_CONTROL, + B43_RADIOCTL_ID); + tmp = b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); + b43_write16(dev, B43_MMIO_RADIO_CONTROL, + B43_RADIOCTL_ID); + tmp |= (u32)b43_read16(dev, B43_MMIO_RADIO_DATA_HIGH) + << 16; + } + radio_manuf = (tmp & 0x00000FFF); + radio_ver = (tmp & 0x0FFFF000) >> 12; + radio_rev = (tmp & 0xF0000000) >> 28; + } + if (radio_manuf != 0x17F /* Broadcom */) unsupported = 1; switch (phy_type) { @@ -3789,7 +4430,19 @@ static int b43_phy_versioning(struct b43_wldev *dev) unsupported = 1; break; case B43_PHYTYPE_N: - if (radio_ver != 0x2055) + if (radio_ver != 0x2055 && radio_ver != 0x2056) + unsupported = 1; + break; + case B43_PHYTYPE_LP: + if (radio_ver != 0x2062 && radio_ver != 0x2063) + unsupported = 1; + break; + case B43_PHYTYPE_HT: + if (radio_ver != 0x2059) + unsupported = 1; + break; + case B43_PHYTYPE_LCN: + if (radio_ver != 0x2064) unsupported = 1; break; default: @@ -3818,57 +4471,24 @@ static int b43_phy_versioning(struct b43_wldev *dev) static void setup_struct_phy_for_init(struct b43_wldev *dev, struct b43_phy *phy) { - struct b43_txpower_lo_control *lo; - int i; - - memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig)); - memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos)); - - phy->aci_enable = 0; - phy->aci_wlan_automatic = 0; - phy->aci_hw_rssi = 0; - - phy->radio_off_context.valid = 0; - - lo = phy->lo_control; - if (lo) { - memset(lo, 0, sizeof(*(phy->lo_control))); - lo->tx_bias = 0xFF; - INIT_LIST_HEAD(&lo->calib_list); - } - phy->max_lb_gain = 0; - phy->trsw_rx_gain = 0; - phy->txpwr_offset = 0; - - /* NRSSI */ - phy->nrssislope = 0; - for (i = 0; i < ARRAY_SIZE(phy->nrssi); i++) - phy->nrssi[i] = -1000; - for (i = 0; i < ARRAY_SIZE(phy->nrssi_lt); i++) - phy->nrssi_lt[i] = i; - - phy->lofcal = 0xFFFF; - phy->initval = 0xFFFF; - - phy->interfmode = B43_INTERFMODE_NONE; - phy->channel = 0xFF; - phy->hardware_power_control = !!modparam_hwpctl; - + phy->next_txpwr_check_time = jiffies; /* PHY TX errors counter. */ atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); - /* OFDM-table address caching. */ - phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_UNKNOWN; +#if B43_DEBUG + phy->phy_locked = false; + phy->radio_locked = false; +#endif } static void setup_struct_wldev_for_init(struct b43_wldev *dev) { - dev->dfq_valid = 0; + dev->dfq_valid = false; /* Assume the radio is enabled. If it's not enabled, the state will * immediately get fixed on the first periodic work run. */ - dev->radio_hw_enable = 1; + dev->radio_hw_enable = true; /* Stats */ memset(&dev->stats, 0, sizeof(dev->stats)); @@ -3878,7 +4498,9 @@ static void setup_struct_wldev_for_init(struct b43_wldev *dev) /* IRQ related flags */ dev->irq_reason = 0; memset(dev->dma_reason, 0, sizeof(dev->dma_reason)); - dev->irq_savedstate = B43_IRQ_MASKTEMPLATE; + dev->irq_mask = B43_IRQ_MASKTEMPLATE; + if (b43_modparam_verbose < B43_VERBOSITY_DEBUG) + dev->irq_mask &= ~B43_IRQ_PHY_TXERR; dev->mac_suspended = 1; @@ -3888,7 +4510,7 @@ static void setup_struct_wldev_for_init(struct b43_wldev *dev) static void b43_bluetooth_coext_enable(struct b43_wldev *dev) { - struct ssb_sprom *sprom = &dev->dev->bus->sprom; + struct ssb_sprom *sprom = dev->dev->bus_sprom; u64 hf; if (!modparam_btcoex) @@ -3915,45 +4537,27 @@ static void b43_bluetooth_coext_disable(struct b43_wldev *dev) static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev) { -#ifdef CONFIG_SSB_DRIVER_PCICORE - struct ssb_bus *bus = dev->dev->bus; + struct ssb_bus *bus; u32 tmp; - if (bus->pcicore.dev && - bus->pcicore.dev->id.coreid == SSB_DEV_PCI && - bus->pcicore.dev->id.revision <= 5) { - /* IMCFGLO timeouts workaround. */ - tmp = ssb_read32(dev->dev, SSB_IMCFGLO); +#ifdef CONFIG_B43_SSB + if (dev->dev->bus_type != B43_BUS_SSB) + return; +#else + return; +#endif + + bus = dev->dev->sdev->bus; + + if ((bus->chip_id == 0x4311 && bus->chip_rev == 2) || + (bus->chip_id == 0x4312)) { + tmp = ssb_read32(dev->dev->sdev, SSB_IMCFGLO); tmp &= ~SSB_IMCFGLO_REQTO; tmp &= ~SSB_IMCFGLO_SERTO; - switch (bus->bustype) { - case SSB_BUSTYPE_PCI: - case SSB_BUSTYPE_PCMCIA: - tmp |= 0x32; - break; - case SSB_BUSTYPE_SSB: - tmp |= 0x53; - break; - } - ssb_write32(dev->dev, SSB_IMCFGLO, tmp); + tmp |= 0x3; + ssb_write32(dev->dev->sdev, SSB_IMCFGLO, tmp); + ssb_commit_settings(bus); } -#endif /* CONFIG_SSB_DRIVER_PCICORE */ -} - -/* Write the short and long frame retry limit values. */ -static void b43_set_retry_limits(struct b43_wldev *dev, - unsigned int short_retry, - unsigned int long_retry) -{ - /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing - * the chip-internal counter. */ - short_retry = min(short_retry, (unsigned int)0xF); - long_retry = min(long_retry, (unsigned int)0xF); - - b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT, - short_retry); - b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT, - long_retry); } static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle) @@ -3965,7 +4569,7 @@ static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle) pu_delay = 3700; else pu_delay = 1050; - if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS) || idle) + if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC) || idle) pu_delay = 500; if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8)) pu_delay = max(pu_delay, (u16)2400); @@ -3979,7 +4583,7 @@ static void b43_set_pretbtt(struct b43_wldev *dev) u16 pretbtt; /* The time value is in microseconds. */ - if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS)) { + if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) { pretbtt = 2; } else { if (dev->phy.type == B43_PHYTYPE_A) @@ -3995,88 +4599,91 @@ static void b43_set_pretbtt(struct b43_wldev *dev) /* Locking: wl->mutex */ static void b43_wireless_core_exit(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; - u32 macctl; - - B43_WARN_ON(b43_status(dev) > B43_STAT_INITIALIZED); - if (b43_status(dev) != B43_STAT_INITIALIZED) + B43_WARN_ON(dev && b43_status(dev) > B43_STAT_INITIALIZED); + if (!dev || b43_status(dev) != B43_STAT_INITIALIZED) return; + b43_set_status(dev, B43_STAT_UNINIT); /* Stop the microcode PSM. */ - macctl = b43_read32(dev, B43_MMIO_MACCTL); - macctl &= ~B43_MACCTL_PSM_RUN; - macctl |= B43_MACCTL_PSM_JMP0; - b43_write32(dev, B43_MMIO_MACCTL, macctl); + b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_PSM_RUN, + B43_MACCTL_PSM_JMP0); - if (!dev->suspend_in_progress) { - b43_leds_exit(dev); - b43_rng_exit(dev->wl); + switch (dev->dev->bus_type) { +#ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: + bcma_core_pci_down(dev->dev->bdev->bus); + break; +#endif +#ifdef CONFIG_B43_SSB + case B43_BUS_SSB: + /* TODO */ + break; +#endif } + b43_dma_free(dev); b43_pio_free(dev); b43_chip_exit(dev); - b43_radio_turn_off(dev, 1); - b43_switch_analog(dev, 0); - if (phy->dyn_tssi_tbl) - kfree(phy->tssi2dbm); - kfree(phy->lo_control); - phy->lo_control = NULL; + dev->phy.ops->switch_analog(dev, 0); if (dev->wl->current_beacon) { dev_kfree_skb_any(dev->wl->current_beacon); dev->wl->current_beacon = NULL; } - ssb_device_disable(dev->dev, 0); - ssb_bus_may_powerdown(dev->dev->bus); + b43_device_disable(dev, 0); + b43_bus_may_powerdown(dev); } /* Initialize a wireless core */ static int b43_wireless_core_init(struct b43_wldev *dev) { - struct b43_wl *wl = dev->wl; - struct ssb_bus *bus = dev->dev->bus; - struct ssb_sprom *sprom = &bus->sprom; + struct ssb_sprom *sprom = dev->dev->bus_sprom; struct b43_phy *phy = &dev->phy; int err; u64 hf; - u32 tmp; B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT); - err = ssb_bus_powerup(bus, 0); + err = b43_bus_powerup(dev, 0); if (err) goto out; - if (!ssb_device_is_enabled(dev->dev)) { - tmp = phy->gmode ? B43_TMSLOW_GMODE : 0; - b43_wireless_core_reset(dev, tmp); - } + if (!b43_device_is_enabled(dev)) + b43_wireless_core_reset(dev, phy->gmode); - if ((phy->type == B43_PHYTYPE_B) || (phy->type == B43_PHYTYPE_G)) { - phy->lo_control = - kzalloc(sizeof(*(phy->lo_control)), GFP_KERNEL); - if (!phy->lo_control) { - err = -ENOMEM; - goto err_busdown; - } - } + /* Reset all data structures. */ setup_struct_wldev_for_init(dev); - - err = b43_phy_init_tssi2dbm_table(dev); - if (err) - goto err_kfree_lo_control; + phy->ops->prepare_structs(dev); /* Enable IRQ routing to this device. */ - ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev); + switch (dev->dev->bus_type) { +#ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: + bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0], + dev->dev->bdev, true); + bcma_core_pci_up(dev->dev->bdev->bus); + break; +#endif +#ifdef CONFIG_B43_SSB + case B43_BUS_SSB: + ssb_pcicore_dev_irqvecs_enable(&dev->dev->sdev->bus->pcicore, + dev->dev->sdev); + break; +#endif + } b43_imcfglo_timeouts_workaround(dev); b43_bluetooth_coext_disable(dev); - b43_phy_early_init(dev); + if (phy->ops->prepare_hardware) { + err = phy->ops->prepare_hardware(dev); + if (err) + goto err_busdown; + } err = b43_chip_init(dev); if (err) - goto err_kfree_tssitbl; + goto err_busdown; b43_shm_write16(dev, B43_SHM_SHARED, - B43_SHM_SH_WLCOREREV, dev->dev->id.revision); + B43_SHM_SH_WLCOREREV, dev->dev->core_rev); hf = b43_hf_read(dev); if (phy->type == B43_PHYTYPE_G) { hf |= B43_HF_SYMW; @@ -4084,11 +4691,22 @@ static int b43_wireless_core_init(struct b43_wldev *dev) hf |= B43_HF_GDCW; if (sprom->boardflags_lo & B43_BFL_PACTRL) hf |= B43_HF_OFDMPABOOST; - } else if (phy->type == B43_PHYTYPE_B) { - hf |= B43_HF_SYMW; - if (phy->rev >= 2 && phy->radio_ver == 0x2050) - hf &= ~B43_HF_GDCW; } + if (phy->radio_ver == 0x2050) { + if (phy->radio_rev == 6) + hf |= B43_HF_4318TSSI; + if (phy->radio_rev < 6) + hf |= B43_HF_VCORECALC; + } + if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW) + hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */ +#if defined(CONFIG_B43_SSB) && defined(CONFIG_SSB_DRIVER_PCICORE) + if (dev->dev->bus_type == B43_BUS_SSB && + dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI && + dev->dev->sdev->bus->pcicore.dev->id.revision <= 10) + hf |= B43_HF_PCISCW; /* PCI slow clock workaround. */ +#endif + hf &= ~B43_HF_SKCFPUP; b43_hf_write(dev, hf); b43_set_retry_limits(dev, B43_DEFAULT_SHORT_RETRY_LIMIT, @@ -4106,19 +4724,25 @@ static int b43_wireless_core_init(struct b43_wldev *dev) b43_set_phytxctl_defaults(dev); /* Minimum Contention Window */ - if (phy->type == B43_PHYTYPE_B) { + if (phy->type == B43_PHYTYPE_B) b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0x1F); - } else { + else b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0xF); - } /* Maximum Contention Window */ b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF); - if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) || B43_FORCE_PIO) { - dev->__using_pio_transfers = 1; + if (b43_bus_host_is_pcmcia(dev->dev) || + b43_bus_host_is_sdio(dev->dev)) { + dev->__using_pio_transfers = true; + err = b43_pio_init(dev); + } else if (dev->use_pio) { + b43warn(dev->wl, "Forced PIO by use_pio module parameter. " + "This should not be needed and will result in lower " + "performance.\n"); + dev->__using_pio_transfers = true; err = b43_pio_init(dev); } else { - dev->__using_pio_transfers = 0; + dev->__using_pio_transfers = false; err = b43_dma_init(dev); } if (err) @@ -4127,98 +4751,87 @@ static int b43_wireless_core_init(struct b43_wldev *dev) b43_set_synth_pu_delay(dev, 1); b43_bluetooth_coext_enable(dev); - ssb_bus_powerup(bus, 1); /* Enable dynamic PCTL */ + b43_bus_powerup(dev, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)); b43_upload_card_macaddress(dev); b43_security_init(dev); - if (!dev->suspend_in_progress) - b43_rng_init(wl); + + ieee80211_wake_queues(dev->wl->hw); b43_set_status(dev, B43_STAT_INITIALIZED); - if (!dev->suspend_in_progress) - b43_leds_init(dev); out: return err; - err_chip_exit: +err_chip_exit: b43_chip_exit(dev); - err_kfree_tssitbl: - if (phy->dyn_tssi_tbl) - kfree(phy->tssi2dbm); - err_kfree_lo_control: - kfree(phy->lo_control); - phy->lo_control = NULL; - err_busdown: - ssb_bus_may_powerdown(bus); +err_busdown: + b43_bus_may_powerdown(dev); B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT); return err; } static int b43_op_add_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) + struct ieee80211_vif *vif) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev; - unsigned long flags; int err = -EOPNOTSUPP; /* TODO: allow WDS/AP devices to coexist */ - if (conf->type != IEEE80211_IF_TYPE_AP && - conf->type != IEEE80211_IF_TYPE_MESH_POINT && - conf->type != IEEE80211_IF_TYPE_STA && - conf->type != IEEE80211_IF_TYPE_WDS && - conf->type != IEEE80211_IF_TYPE_IBSS) + if (vif->type != NL80211_IFTYPE_AP && + vif->type != NL80211_IFTYPE_MESH_POINT && + vif->type != NL80211_IFTYPE_STATION && + vif->type != NL80211_IFTYPE_WDS && + vif->type != NL80211_IFTYPE_ADHOC) return -EOPNOTSUPP; mutex_lock(&wl->mutex); if (wl->operating) goto out_mutex_unlock; - b43dbg(wl, "Adding Interface type %d\n", conf->type); + b43dbg(wl, "Adding Interface type %d\n", vif->type); dev = wl->current_dev; - wl->operating = 1; - wl->vif = conf->vif; - wl->if_type = conf->type; - memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN); + wl->operating = true; + wl->vif = vif; + wl->if_type = vif->type; + memcpy(wl->mac_addr, vif->addr, ETH_ALEN); - spin_lock_irqsave(&wl->irq_lock, flags); b43_adjust_opmode(dev); b43_set_pretbtt(dev); b43_set_synth_pu_delay(dev, 0); b43_upload_card_macaddress(dev); - spin_unlock_irqrestore(&wl->irq_lock, flags); err = 0; out_mutex_unlock: mutex_unlock(&wl->mutex); + if (err == 0) + b43_op_bss_info_changed(hw, vif, &vif->bss_conf, ~0); + return err; } static void b43_op_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) + struct ieee80211_vif *vif) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; - unsigned long flags; - b43dbg(wl, "Removing Interface type %d\n", conf->type); + b43dbg(wl, "Removing Interface type %d\n", vif->type); mutex_lock(&wl->mutex); B43_WARN_ON(!wl->operating); - B43_WARN_ON(wl->vif != conf->vif); + B43_WARN_ON(wl->vif != vif); wl->vif = NULL; - wl->operating = 0; + wl->operating = false; - spin_lock_irqsave(&wl->irq_lock, flags); b43_adjust_opmode(dev); memset(wl->mac_addr, 0, ETH_ALEN); b43_upload_card_macaddress(dev); - spin_unlock_irqrestore(&wl->irq_lock, flags); mutex_unlock(&wl->mutex); } @@ -4229,7 +4842,6 @@ static int b43_op_start(struct ieee80211_hw *hw) struct b43_wldev *dev = wl->current_dev; int did_init = 0; int err = 0; - bool do_rfkill_exit = 0; /* Kill all old instance specific information to make sure * the card won't use it in the short timeframe between start @@ -4237,24 +4849,19 @@ static int b43_op_start(struct ieee80211_hw *hw) memset(wl->bssid, 0, ETH_ALEN); memset(wl->mac_addr, 0, ETH_ALEN); wl->filter_flags = 0; - wl->radiotap_enabled = 0; + wl->radiotap_enabled = false; b43_qos_clear(wl); - wl->beacon0_uploaded = 0; - wl->beacon1_uploaded = 0; - wl->beacon_templates_virgin = 1; - - /* First register RFkill. - * LEDs that are registered later depend on it. */ - b43_rfkill_init(dev); + wl->beacon0_uploaded = false; + wl->beacon1_uploaded = false; + wl->beacon_templates_virgin = true; + wl->radio_enabled = true; mutex_lock(&wl->mutex); if (b43_status(dev) < B43_STAT_INITIALIZED) { err = b43_wireless_core_init(dev); - if (err) { - do_rfkill_exit = 1; + if (err) goto out_mutex_unlock; - } did_init = 1; } @@ -4263,16 +4870,24 @@ static int b43_op_start(struct ieee80211_hw *hw) if (err) { if (did_init) b43_wireless_core_exit(dev); - do_rfkill_exit = 1; goto out_mutex_unlock; } } + /* XXX: only do if device doesn't support rfkill irq */ + wiphy_rfkill_start_polling(hw->wiphy); + out_mutex_unlock: mutex_unlock(&wl->mutex); - if (do_rfkill_exit) - b43_rfkill_exit(dev); + /* + * Configuration may have been overwritten during initialization. + * Reload the configuration, but only if initialization was + * successful. Reloading the configuration after a failed init + * may hang the system. + */ + if (!err) + b43_op_config(hw, ~0); return err; } @@ -4282,57 +4897,90 @@ static void b43_op_stop(struct ieee80211_hw *hw) struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; - b43_rfkill_exit(dev); - cancel_work_sync(&(wl->qos_update_work)); cancel_work_sync(&(wl->beacon_update_trigger)); + if (!dev) + goto out; + mutex_lock(&wl->mutex); - if (b43_status(dev) >= B43_STAT_STARTED) - b43_wireless_core_stop(dev); + if (b43_status(dev) >= B43_STAT_STARTED) { + dev = b43_wireless_core_stop(dev); + if (!dev) + goto out_unlock; + } b43_wireless_core_exit(dev); + wl->radio_enabled = false; + +out_unlock: mutex_unlock(&wl->mutex); +out: + cancel_work_sync(&(wl->txpower_adjust_work)); } -static int b43_op_set_retry_limit(struct ieee80211_hw *hw, - u32 short_retry_limit, u32 long_retry_limit) +static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, bool set) +{ + struct b43_wl *wl = hw_to_b43_wl(hw); + + /* FIXME: add locking */ + b43_update_templates(wl); + + return 0; +} + +static void b43_op_sta_notify(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + enum sta_notify_cmd notify_cmd, + struct ieee80211_sta *sta) +{ + struct b43_wl *wl = hw_to_b43_wl(hw); + + B43_WARN_ON(!vif || wl->vif != vif); +} + +static void b43_op_sw_scan_start_notifier(struct ieee80211_hw *hw) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev; - int err = 0; mutex_lock(&wl->mutex); dev = wl->current_dev; - if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED))) { - err = -ENODEV; - goto out_unlock; + if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) { + /* Disable CFP update during scan on other channels. */ + b43_hf_write(dev, b43_hf_read(dev) | B43_HF_SKCFPUP); } - b43_set_retry_limits(dev, short_retry_limit, long_retry_limit); -out_unlock: mutex_unlock(&wl->mutex); - - return err; } -static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, int aid, int set) +static void b43_op_sw_scan_complete_notifier(struct ieee80211_hw *hw) { struct b43_wl *wl = hw_to_b43_wl(hw); - unsigned long flags; - - spin_lock_irqsave(&wl->irq_lock, flags); - b43_update_templates(wl); - spin_unlock_irqrestore(&wl->irq_lock, flags); + struct b43_wldev *dev; - return 0; + mutex_lock(&wl->mutex); + dev = wl->current_dev; + if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) { + /* Re-enable CFP update. */ + b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_SKCFPUP); + } + mutex_unlock(&wl->mutex); } -static void b43_op_sta_notify(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - enum sta_notify_cmd notify_cmd, - const u8 *addr) +static int b43_op_get_survey(struct ieee80211_hw *hw, int idx, + struct survey_info *survey) { struct b43_wl *wl = hw_to_b43_wl(hw); + struct b43_wldev *dev = wl->current_dev; + struct ieee80211_conf *conf = &hw->conf; - B43_WARN_ON(!vif || wl->vif != vif); + if (idx != 0) + return -ENOENT; + + survey->channel = conf->chandef.chan; + survey->filled = SURVEY_INFO_NOISE_DBM; + survey->noise = dev->stats.link_noise; + + return 0; } static const struct ieee80211_ops b43_hw_ops = { @@ -4341,16 +4989,21 @@ static const struct ieee80211_ops b43_hw_ops = { .add_interface = b43_op_add_interface, .remove_interface = b43_op_remove_interface, .config = b43_op_config, - .config_interface = b43_op_config_interface, + .bss_info_changed = b43_op_bss_info_changed, .configure_filter = b43_op_configure_filter, .set_key = b43_op_set_key, + .update_tkip_key = b43_op_update_tkip_key, .get_stats = b43_op_get_stats, - .get_tx_stats = b43_op_get_tx_stats, + .get_tsf = b43_op_get_tsf, + .set_tsf = b43_op_set_tsf, .start = b43_op_start, .stop = b43_op_stop, - .set_retry_limit = b43_op_set_retry_limit, .set_tim = b43_op_beacon_set_tim, .sta_notify = b43_op_sta_notify, + .sw_scan_start = b43_op_sw_scan_start_notifier, + .sw_scan_complete = b43_op_sw_scan_complete_notifier, + .get_survey = b43_op_get_survey, + .rfkill_poll = b43_rfkill_poll, }; /* Hard-reset the chip. Do not call this directly. @@ -4368,8 +5021,13 @@ static void b43_chip_reset(struct work_struct *work) prev_status = b43_status(dev); /* Bring the device down... */ - if (prev_status >= B43_STAT_STARTED) - b43_wireless_core_stop(dev); + if (prev_status >= B43_STAT_STARTED) { + dev = b43_wireless_core_stop(dev); + if (!dev) { + err = -ENODEV; + goto out; + } + } if (prev_status >= B43_STAT_INITIALIZED) b43_wireless_core_exit(dev); @@ -4390,10 +5048,18 @@ out: if (err) wl->current_dev = NULL; /* Failed to init the dev. */ mutex_unlock(&wl->mutex); - if (err) + + if (err) { b43err(wl, "Controller restart FAILED\n"); - else - b43info(wl, "Controller restarted\n"); + return; + } + + /* reload configuration */ + b43_op_config(wl->hw, ~0); + if (wl->vif) + b43_op_bss_info_changed(wl->hw, wl->vif, &wl->vif->bss_conf, ~0); + + b43info(wl, "Controller restarted\n"); } static int b43_setup_bands(struct b43_wldev *dev, @@ -4422,16 +5088,88 @@ static void b43_wireless_core_detach(struct b43_wldev *dev) /* We release firmware that late to not be required to re-request * is all the time when we reinit the core. */ b43_release_firmware(dev); + b43_phy_free(dev); +} + +static void b43_supported_bands(struct b43_wldev *dev, bool *have_2ghz_phy, + bool *have_5ghz_phy) +{ + u16 dev_id = 0; + +#ifdef CONFIG_B43_BCMA + if (dev->dev->bus_type == B43_BUS_BCMA && + dev->dev->bdev->bus->hosttype == BCMA_HOSTTYPE_PCI) + dev_id = dev->dev->bdev->bus->host_pci->device; +#endif +#ifdef CONFIG_B43_SSB + if (dev->dev->bus_type == B43_BUS_SSB && + dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI) + dev_id = dev->dev->sdev->bus->host_pci->device; +#endif + /* Override with SPROM value if available */ + if (dev->dev->bus_sprom->dev_id) + dev_id = dev->dev->bus_sprom->dev_id; + + /* Note: below IDs can be "virtual" (not maching e.g. real PCI ID) */ + switch (dev_id) { + case 0x4324: /* BCM4306 */ + case 0x4312: /* BCM4311 */ + case 0x4319: /* BCM4318 */ + case 0x4328: /* BCM4321 */ + case 0x432b: /* BCM4322 */ + case 0x4350: /* BCM43222 */ + case 0x4353: /* BCM43224 */ + case 0x0576: /* BCM43224 */ + case 0x435f: /* BCM6362 */ + case 0x4331: /* BCM4331 */ + case 0x4359: /* BCM43228 */ + case 0x43a0: /* BCM4360 */ + case 0x43b1: /* BCM4352 */ + /* Dual band devices */ + *have_2ghz_phy = true; + *have_5ghz_phy = true; + return; + case 0x4321: /* BCM4306 */ + case 0x4313: /* BCM4311 */ + case 0x431a: /* BCM4318 */ + case 0x432a: /* BCM4321 */ + case 0x432d: /* BCM4322 */ + case 0x4352: /* BCM43222 */ + case 0x4333: /* BCM4331 */ + case 0x43a2: /* BCM4360 */ + case 0x43b3: /* BCM4352 */ + /* 5 GHz only devices */ + *have_2ghz_phy = false; + *have_5ghz_phy = true; + return; + } + + /* As a fallback, try to guess using PHY type */ + switch (dev->phy.type) { + case B43_PHYTYPE_A: + *have_2ghz_phy = false; + *have_5ghz_phy = true; + return; + case B43_PHYTYPE_G: + case B43_PHYTYPE_N: + case B43_PHYTYPE_LP: + case B43_PHYTYPE_HT: + case B43_PHYTYPE_LCN: + *have_2ghz_phy = true; + *have_5ghz_phy = false; + return; + } + + B43_WARN_ON(1); } static int b43_wireless_core_attach(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; - struct ssb_bus *bus = dev->dev->bus; - struct pci_dev *pdev = bus->host_pci; + struct b43_phy *phy = &dev->phy; int err; - bool have_2ghz_phy = 0, have_5ghz_phy = 0; u32 tmp; + bool have_2ghz_phy = false, have_5ghz_phy = false; /* Do NOT do any device initialization here. * Do it in wireless_core_init() instead. @@ -4440,91 +5178,97 @@ static int b43_wireless_core_attach(struct b43_wldev *dev) * that in core_init(), too. */ - err = ssb_bus_powerup(bus, 0); + err = b43_bus_powerup(dev, 0); if (err) { b43err(wl, "Bus powerup failed\n"); goto out; } - /* Get the PHY type. */ - if (dev->dev->id.revision >= 5) { - u32 tmshigh; - tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH); - have_2ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY); - have_5ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_5GHZ_PHY); - } else - B43_WARN_ON(1); + phy->do_full_init = true; + + /* Try to guess supported bands for the first init needs */ + switch (dev->dev->bus_type) { +#ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: + tmp = bcma_aread32(dev->dev->bdev, BCMA_IOST); + have_2ghz_phy = !!(tmp & B43_BCMA_IOST_2G_PHY); + have_5ghz_phy = !!(tmp & B43_BCMA_IOST_5G_PHY); + break; +#endif +#ifdef CONFIG_B43_SSB + case B43_BUS_SSB: + if (dev->dev->core_rev >= 5) { + tmp = ssb_read32(dev->dev->sdev, SSB_TMSHIGH); + have_2ghz_phy = !!(tmp & B43_TMSHIGH_HAVE_2GHZ_PHY); + have_5ghz_phy = !!(tmp & B43_TMSHIGH_HAVE_5GHZ_PHY); + } else + B43_WARN_ON(1); + break; +#endif + } dev->phy.gmode = have_2ghz_phy; - tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; - b43_wireless_core_reset(dev, tmp); + b43_wireless_core_reset(dev, dev->phy.gmode); + /* Get the PHY type. */ err = b43_phy_versioning(dev); if (err) goto err_powerdown; - /* Check if this device supports multiband. */ - if (!pdev || - (pdev->device != 0x4312 && - pdev->device != 0x4319 && pdev->device != 0x4324)) { - /* No multiband support. */ - have_2ghz_phy = 0; - have_5ghz_phy = 0; - switch (dev->phy.type) { - case B43_PHYTYPE_A: - have_5ghz_phy = 1; - break; - case B43_PHYTYPE_G: - case B43_PHYTYPE_N: - have_2ghz_phy = 1; - break; - default: - B43_WARN_ON(1); - } + + /* Get real info about supported bands */ + b43_supported_bands(dev, &have_2ghz_phy, &have_5ghz_phy); + + /* We don't support 5 GHz on some PHYs yet */ + switch (dev->phy.type) { + case B43_PHYTYPE_A: + case B43_PHYTYPE_G: + case B43_PHYTYPE_N: + case B43_PHYTYPE_LP: + case B43_PHYTYPE_HT: + b43warn(wl, "5 GHz band is unsupported on this PHY\n"); + have_5ghz_phy = false; } - if (dev->phy.type == B43_PHYTYPE_A) { - /* FIXME */ - b43err(wl, "IEEE 802.11a devices are unsupported\n"); + + if (!have_2ghz_phy && !have_5ghz_phy) { + b43err(wl, "b43 can't support any band on this device\n"); err = -EOPNOTSUPP; goto err_powerdown; } - if (1 /* disable A-PHY */) { - /* FIXME: For now we disable the A-PHY on multi-PHY devices. */ - if (dev->phy.type != B43_PHYTYPE_N) { - have_2ghz_phy = 1; - have_5ghz_phy = 0; - } - } + + err = b43_phy_allocate(dev); + if (err) + goto err_powerdown; dev->phy.gmode = have_2ghz_phy; - tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; - b43_wireless_core_reset(dev, tmp); + b43_wireless_core_reset(dev, dev->phy.gmode); err = b43_validate_chipaccess(dev); if (err) - goto err_powerdown; + goto err_phy_free; err = b43_setup_bands(dev, have_2ghz_phy, have_5ghz_phy); if (err) - goto err_powerdown; + goto err_phy_free; /* Now set some default "current_dev" */ if (!wl->current_dev) wl->current_dev = dev; INIT_WORK(&dev->restart_work, b43_chip_reset); - b43_radio_turn_off(dev, 1); - b43_switch_analog(dev, 0); - ssb_device_disable(dev->dev, 0); - ssb_bus_may_powerdown(bus); + dev->phy.ops->switch_analog(dev, 0); + b43_device_disable(dev, 0); + b43_bus_may_powerdown(dev); out: return err; +err_phy_free: + b43_phy_free(dev); err_powerdown: - ssb_bus_may_powerdown(bus); + b43_bus_may_powerdown(dev); return err; } -static void b43_one_core_detach(struct ssb_device *dev) +static void b43_one_core_detach(struct b43_bus_dev *dev) { struct b43_wldev *wldev; struct b43_wl *wl; @@ -4532,58 +5276,36 @@ static void b43_one_core_detach(struct ssb_device *dev) /* Do not cancel ieee80211-workqueue based work here. * See comment in b43_remove(). */ - wldev = ssb_get_drvdata(dev); + wldev = b43_bus_get_wldev(dev); wl = wldev->wl; b43_debugfs_remove_device(wldev); b43_wireless_core_detach(wldev); list_del(&wldev->list); - wl->nr_devs--; - ssb_set_drvdata(dev, NULL); + b43_bus_set_wldev(dev, NULL); kfree(wldev); } -static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl) +static int b43_one_core_attach(struct b43_bus_dev *dev, struct b43_wl *wl) { struct b43_wldev *wldev; - struct pci_dev *pdev; int err = -ENOMEM; - if (!list_empty(&wl->devlist)) { - /* We are not the first core on this chip. */ - pdev = dev->bus->host_pci; - /* Only special chips support more than one wireless - * core, although some of the other chips have more than - * one wireless core as well. Check for this and - * bail out early. - */ - if (!pdev || - ((pdev->device != 0x4321) && - (pdev->device != 0x4313) && (pdev->device != 0x431A))) { - b43dbg(wl, "Ignoring unconnected 802.11 core\n"); - return -ENODEV; - } - } - wldev = kzalloc(sizeof(*wldev), GFP_KERNEL); if (!wldev) goto out; + wldev->use_pio = b43_modparam_pio; wldev->dev = dev; wldev->wl = wl; b43_set_status(wldev, B43_STAT_UNINIT); wldev->bad_frames_preempt = modparam_bad_frames_preempt; - tasklet_init(&wldev->isr_tasklet, - (void (*)(unsigned long))b43_interrupt_tasklet, - (unsigned long)wldev); INIT_LIST_HEAD(&wldev->list); err = b43_wireless_core_attach(wldev); if (err) goto err_kfree_wldev; - list_add(&wldev->list, &wl->devlist); - wl->nr_devs++; - ssb_set_drvdata(dev, wldev); + b43_bus_set_wldev(dev, wldev); b43_debugfs_add_device(wldev); out: @@ -4600,227 +5322,268 @@ static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl) (pdev->subsystem_vendor == PCI_VENDOR_ID_##_subvendor) && \ (pdev->subsystem_device == _subdevice) ) +#ifdef CONFIG_B43_SSB static void b43_sprom_fixup(struct ssb_bus *bus) { struct pci_dev *pdev; /* boardflags workarounds */ if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL && - bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74) + bus->chip_id == 0x4301 && bus->sprom.board_rev == 0x74) bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST; if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE && - bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40) + bus->boardinfo.type == 0x4E && bus->sprom.board_rev > 0x40) bus->sprom.boardflags_lo |= B43_BFL_PACTRL; if (bus->bustype == SSB_BUSTYPE_PCI) { pdev = bus->host_pci; if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) || IS_PDEV(pdev, BROADCOM, 0x4320, DELL, 0x0003) || + IS_PDEV(pdev, BROADCOM, 0x4320, HP, 0x12f8) || IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) || IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) || - IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013)) + IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013) || + IS_PDEV(pdev, BROADCOM, 0x4320, MOTOROLA, 0x7010)) bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST; } } -static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl) +static void b43_wireless_exit(struct b43_bus_dev *dev, struct b43_wl *wl) { struct ieee80211_hw *hw = wl->hw; - ssb_set_devtypedata(dev, NULL); + ssb_set_devtypedata(dev->sdev, NULL); ieee80211_free_hw(hw); } +#endif -static int b43_wireless_init(struct ssb_device *dev) +static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev) { - struct ssb_sprom *sprom = &dev->bus->sprom; + struct ssb_sprom *sprom = dev->bus_sprom; struct ieee80211_hw *hw; struct b43_wl *wl; - int err = -ENOMEM; - - b43_sprom_fixup(dev->bus); + char chip_name[6]; + int queue_num; hw = ieee80211_alloc_hw(sizeof(*wl), &b43_hw_ops); if (!hw) { b43err(NULL, "Could not allocate ieee80211 device\n"); - goto out; + return ERR_PTR(-ENOMEM); } + wl = hw_to_b43_wl(hw); /* fill hw info */ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_NOISE_DBM; + IEEE80211_HW_SIGNAL_DBM; + + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_MESH_POINT) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_WDS) | + BIT(NL80211_IFTYPE_ADHOC); - hw->queues = b43_modparam_qos ? 4 : 1; + hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; + + wl->hw_registred = false; + hw->max_rates = 2; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac); else SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac); - /* Get and initialize struct b43_wl */ - wl = hw_to_b43_wl(hw); - memset(wl, 0, sizeof(*wl)); + /* Initialize struct b43_wl */ wl->hw = hw; - spin_lock_init(&wl->irq_lock); - rwlock_init(&wl->tx_lock); - spin_lock_init(&wl->leds_lock); - spin_lock_init(&wl->shm_lock); mutex_init(&wl->mutex); - INIT_LIST_HEAD(&wl->devlist); - INIT_WORK(&wl->qos_update_work, b43_qos_update_work); + spin_lock_init(&wl->hardirq_lock); INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work); + INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work); + INIT_WORK(&wl->tx_work, b43_tx_work); - ssb_set_devtypedata(dev, wl); - b43info(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id); - err = 0; - out: - return err; + /* Initialize queues and flags. */ + for (queue_num = 0; queue_num < B43_QOS_QUEUE_NUM; queue_num++) { + skb_queue_head_init(&wl->tx_queue[queue_num]); + wl->tx_queue_stopped[queue_num] = 0; + } + + snprintf(chip_name, ARRAY_SIZE(chip_name), + (dev->chip_id > 0x9999) ? "%d" : "%04X", dev->chip_id); + b43info(wl, "Broadcom %s WLAN found (core revision %u)\n", chip_name, + dev->core_rev); + return wl; } -static int b43_probe(struct ssb_device *dev, const struct ssb_device_id *id) +#ifdef CONFIG_B43_BCMA +static int b43_bcma_probe(struct bcma_device *core) { + struct b43_bus_dev *dev; struct b43_wl *wl; int err; - int first = 0; - wl = ssb_get_devtypedata(dev); - if (!wl) { - /* Probing the first core. Must setup common struct b43_wl */ - first = 1; - err = b43_wireless_init(dev); - if (err) - goto out; - wl = ssb_get_devtypedata(dev); - B43_WARN_ON(!wl); + if (!modparam_allhwsupport && + (core->id.rev == 0x17 || core->id.rev == 0x18)) { + pr_err("Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1\n"); + return -ENOTSUPP; + } + + dev = b43_bus_dev_bcma_init(core); + if (!dev) + return -ENODEV; + + wl = b43_wireless_init(dev); + if (IS_ERR(wl)) { + err = PTR_ERR(wl); + goto bcma_out; } + err = b43_one_core_attach(dev, wl); if (err) - goto err_wireless_exit; + goto bcma_err_wireless_exit; - if (first) { - err = ieee80211_register_hw(wl->hw); - if (err) - goto err_one_core_detach; - } + /* setup and start work to load firmware */ + INIT_WORK(&wl->firmware_load, b43_request_firmware); + schedule_work(&wl->firmware_load); - out: +bcma_out: return err; - err_one_core_detach: - b43_one_core_detach(dev); - err_wireless_exit: - if (first) - b43_wireless_exit(dev, wl); +bcma_err_wireless_exit: + ieee80211_free_hw(wl->hw); return err; } -static void b43_remove(struct ssb_device *dev) +static void b43_bcma_remove(struct bcma_device *core) { - struct b43_wl *wl = ssb_get_devtypedata(dev); - struct b43_wldev *wldev = ssb_get_drvdata(dev); + struct b43_wldev *wldev = bcma_get_drvdata(core); + struct b43_wl *wl = wldev->wl; /* We must cancel any work here before unregistering from ieee80211, * as the ieee80211 unreg will destroy the workqueue. */ cancel_work_sync(&wldev->restart_work); + cancel_work_sync(&wl->firmware_load); B43_WARN_ON(!wl); - if (wl->current_dev == wldev) + if (!wldev->fw.ucode.data) + return; /* NULL if firmware never loaded */ + if (wl->current_dev == wldev && wl->hw_registred) { + b43_leds_stop(wldev); ieee80211_unregister_hw(wl->hw); + } - b43_one_core_detach(dev); + b43_one_core_detach(wldev->dev); - if (list_empty(&wl->devlist)) { - /* Last core on the chip unregistered. - * We can destroy common struct b43_wl. - */ - b43_wireless_exit(dev, wl); - } -} + /* Unregister HW RNG driver */ + b43_rng_exit(wl); -/* Perform a hardware reset. This can be called from any context. */ -void b43_controller_restart(struct b43_wldev *dev, const char *reason) -{ - /* Must avoid requeueing, if we are in shutdown. */ - if (b43_status(dev) < B43_STAT_INITIALIZED) - return; - b43info(dev->wl, "Controller RESET (%s) ...\n", reason); - queue_work(dev->wl->hw->workqueue, &dev->restart_work); + b43_leds_unregister(wl); + + ieee80211_free_hw(wl->hw); } -#ifdef CONFIG_PM +static struct bcma_driver b43_bcma_driver = { + .name = KBUILD_MODNAME, + .id_table = b43_bcma_tbl, + .probe = b43_bcma_probe, + .remove = b43_bcma_remove, +}; +#endif -static int b43_suspend(struct ssb_device *dev, pm_message_t state) +#ifdef CONFIG_B43_SSB +static +int b43_ssb_probe(struct ssb_device *sdev, const struct ssb_device_id *id) { - struct b43_wldev *wldev = ssb_get_drvdata(dev); - struct b43_wl *wl = wldev->wl; + struct b43_bus_dev *dev; + struct b43_wl *wl; + int err; - b43dbg(wl, "Suspending...\n"); + dev = b43_bus_dev_ssb_init(sdev); + if (!dev) + return -ENOMEM; - mutex_lock(&wl->mutex); - wldev->suspend_in_progress = true; - wldev->suspend_init_status = b43_status(wldev); - if (wldev->suspend_init_status >= B43_STAT_STARTED) - b43_wireless_core_stop(wldev); - if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) - b43_wireless_core_exit(wldev); - mutex_unlock(&wl->mutex); + wl = ssb_get_devtypedata(sdev); + if (wl) { + b43err(NULL, "Dual-core devices are not supported\n"); + err = -ENOTSUPP; + goto err_ssb_kfree_dev; + } - b43dbg(wl, "Device suspended.\n"); + b43_sprom_fixup(sdev->bus); - return 0; + wl = b43_wireless_init(dev); + if (IS_ERR(wl)) { + err = PTR_ERR(wl); + goto err_ssb_kfree_dev; + } + ssb_set_devtypedata(sdev, wl); + B43_WARN_ON(ssb_get_devtypedata(sdev) != wl); + + err = b43_one_core_attach(dev, wl); + if (err) + goto err_ssb_wireless_exit; + + /* setup and start work to load firmware */ + INIT_WORK(&wl->firmware_load, b43_request_firmware); + schedule_work(&wl->firmware_load); + + return err; + +err_ssb_wireless_exit: + b43_wireless_exit(dev, wl); +err_ssb_kfree_dev: + kfree(dev); + return err; } -static int b43_resume(struct ssb_device *dev) +static void b43_ssb_remove(struct ssb_device *sdev) { - struct b43_wldev *wldev = ssb_get_drvdata(dev); - struct b43_wl *wl = wldev->wl; - int err = 0; + struct b43_wl *wl = ssb_get_devtypedata(sdev); + struct b43_wldev *wldev = ssb_get_drvdata(sdev); + struct b43_bus_dev *dev = wldev->dev; - b43dbg(wl, "Resuming...\n"); + /* We must cancel any work here before unregistering from ieee80211, + * as the ieee80211 unreg will destroy the workqueue. */ + cancel_work_sync(&wldev->restart_work); + cancel_work_sync(&wl->firmware_load); - mutex_lock(&wl->mutex); - if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) { - err = b43_wireless_core_init(wldev); - if (err) { - b43err(wl, "Resume failed at core init\n"); - goto out; - } - } - if (wldev->suspend_init_status >= B43_STAT_STARTED) { - err = b43_wireless_core_start(wldev); - if (err) { - b43_leds_exit(wldev); - b43_rng_exit(wldev->wl); - b43_wireless_core_exit(wldev); - b43err(wl, "Resume failed at core start\n"); - goto out; - } + B43_WARN_ON(!wl); + if (!wldev->fw.ucode.data) + return; /* NULL if firmware never loaded */ + if (wl->current_dev == wldev && wl->hw_registred) { + b43_leds_stop(wldev); + ieee80211_unregister_hw(wl->hw); } - b43dbg(wl, "Device resumed.\n"); - out: - wldev->suspend_in_progress = false; - mutex_unlock(&wl->mutex); - return err; -} -#else /* CONFIG_PM */ -# define b43_suspend NULL -# define b43_resume NULL -#endif /* CONFIG_PM */ + b43_one_core_detach(dev); + + /* Unregister HW RNG driver */ + b43_rng_exit(wl); + + b43_leds_unregister(wl); + b43_wireless_exit(dev, wl); +} static struct ssb_driver b43_ssb_driver = { .name = KBUILD_MODNAME, .id_table = b43_ssb_tbl, - .probe = b43_probe, - .remove = b43_remove, - .suspend = b43_suspend, - .resume = b43_resume, + .probe = b43_ssb_probe, + .remove = b43_ssb_remove, }; +#endif /* CONFIG_B43_SSB */ + +/* Perform a hardware reset. This can be called from any context. */ +void b43_controller_restart(struct b43_wldev *dev, const char *reason) +{ + /* Must avoid requeueing, if we are in shutdown. */ + if (b43_status(dev) < B43_STAT_INITIALIZED) + return; + b43info(dev->wl, "Controller RESET (%s) ...\n", reason); + ieee80211_queue_work(dev->wl->hw, &dev->restart_work); +} static void b43_print_driverinfo(void) { const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "", - *feat_leds = "", *feat_rfkill = ""; + *feat_leds = "", *feat_sdio = ""; #ifdef CONFIG_B43_PCI_AUTOSELECT feat_pci = "P"; @@ -4828,20 +5591,19 @@ static void b43_print_driverinfo(void) #ifdef CONFIG_B43_PCMCIA feat_pcmcia = "M"; #endif -#ifdef CONFIG_B43_NPHY +#ifdef CONFIG_B43_PHY_N feat_nphy = "N"; #endif #ifdef CONFIG_B43_LEDS feat_leds = "L"; #endif -#ifdef CONFIG_B43_RFKILL - feat_rfkill = "R"; +#ifdef CONFIG_B43_SDIO + feat_sdio = "S"; #endif printk(KERN_INFO "Broadcom 43xx driver loaded " - "[ Features: %s%s%s%s%s, Firmware-ID: " - B43_SUPPORTED_FIRMWARE_ID " ]\n", + "[ Features: %s%s%s%s%s ]\n", feat_pci, feat_pcmcia, feat_nphy, - feat_leds, feat_rfkill); + feat_leds, feat_sdio); } static int __init b43_init(void) @@ -4852,13 +5614,31 @@ static int __init b43_init(void) err = b43_pcmcia_init(); if (err) goto err_dfs_exit; - err = ssb_driver_register(&b43_ssb_driver); + err = b43_sdio_init(); if (err) goto err_pcmcia_exit; +#ifdef CONFIG_B43_BCMA + err = bcma_driver_register(&b43_bcma_driver); + if (err) + goto err_sdio_exit; +#endif +#ifdef CONFIG_B43_SSB + err = ssb_driver_register(&b43_ssb_driver); + if (err) + goto err_bcma_driver_exit; +#endif b43_print_driverinfo(); return err; +#ifdef CONFIG_B43_SSB +err_bcma_driver_exit: +#endif +#ifdef CONFIG_B43_BCMA + bcma_driver_unregister(&b43_bcma_driver); +err_sdio_exit: +#endif + b43_sdio_exit(); err_pcmcia_exit: b43_pcmcia_exit(); err_dfs_exit: @@ -4868,7 +5648,13 @@ err_dfs_exit: static void __exit b43_exit(void) { +#ifdef CONFIG_B43_SSB ssb_driver_unregister(&b43_ssb_driver); +#endif +#ifdef CONFIG_B43_BCMA + bcma_driver_unregister(&b43_bcma_driver); +#endif + b43_sdio_exit(); b43_pcmcia_exit(); b43_debugfs_exit(); } |