diff options
Diffstat (limited to 'drivers/net/wireless/ath5k')
21 files changed, 0 insertions, 19277 deletions
diff --git a/drivers/net/wireless/ath5k/Kconfig b/drivers/net/wireless/ath5k/Kconfig deleted file mode 100644 index 75383a5df99..00000000000 --- a/drivers/net/wireless/ath5k/Kconfig +++ /dev/null @@ -1,40 +0,0 @@ -config ATH5K - tristate "Atheros 5xxx wireless cards support" - depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL - select MAC80211_LEDS - select LEDS_CLASS - select NEW_LEDS - ---help--- - This module adds support for wireless adapters based on - Atheros 5xxx chipset. - - Currently the following chip versions are supported: - - MAC: AR5211 AR5212 - PHY: RF5111/2111 RF5112/2112 RF5413/2413 - - This driver uses the kernel's mac80211 subsystem. - - If you choose to build a module, it'll be called ath5k. Say M if - unsure. - -config ATH5K_DEBUG - bool "Atheros 5xxx debugging" - depends on ATH5K - ---help--- - Atheros 5xxx debugging messages. - - Say Y, if and you will get debug options for ath5k. - To use this, you need to mount debugfs: - - mkdir /debug/ - mount -t debugfs debug /debug/ - - You will get access to files under: - /debug/ath5k/phy0/ - - To enable debug, pass the debug level to the debug module - parameter. For example: - - modprobe ath5k debug=0x00000400 - diff --git a/drivers/net/wireless/ath5k/Makefile b/drivers/net/wireless/ath5k/Makefile deleted file mode 100644 index 719cfaef708..00000000000 --- a/drivers/net/wireless/ath5k/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -ath5k-y += caps.o -ath5k-y += initvals.o -ath5k-y += eeprom.o -ath5k-y += gpio.o -ath5k-y += desc.o -ath5k-y += dma.o -ath5k-y += qcu.o -ath5k-y += pcu.o -ath5k-y += phy.o -ath5k-y += reset.o -ath5k-y += attach.o -ath5k-y += base.o -ath5k-$(CONFIG_ATH5K_DEBUG) += debug.o -obj-$(CONFIG_ATH5K) += ath5k.o diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h deleted file mode 100644 index 183ffc8e62c..00000000000 --- a/drivers/net/wireless/ath5k/ath5k.h +++ /dev/null @@ -1,1358 +0,0 @@ -/* - * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _ATH5K_H -#define _ATH5K_H - -/* TODO: Clean up channel debuging -doesn't work anyway- and start - * working on reg. control code using all available eeprom information - * -rev. engineering needed- */ -#define CHAN_DEBUG 0 - -#include <linux/io.h> -#include <linux/types.h> -#include <net/mac80211.h> - -/* RX/TX descriptor hw structs - * TODO: Driver part should only see sw structs */ -#include "desc.h" - -/* EEPROM structs/offsets - * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities) - * and clean up common bits, then introduce set/get functions in eeprom.c */ -#include "eeprom.h" - -/* PCI IDs */ -#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ -#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ -#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ -#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ -#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ -#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ -#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ -#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ -#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ -#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ -#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ -#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ - -/****************************\ - GENERIC DRIVER DEFINITIONS -\****************************/ - -#define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__) - -#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ - printk(_level "ath5k %s: " _fmt, \ - ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \ - ##__VA_ARGS__) - -#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \ - if (net_ratelimit()) \ - ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ - } while (0) - -#define ATH5K_INFO(_sc, _fmt, ...) \ - ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__) - -#define ATH5K_WARN(_sc, _fmt, ...) \ - ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__) - -#define ATH5K_ERR(_sc, _fmt, ...) \ - ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) - -/* - * AR5K REGISTER ACCESS - */ - -/* Some macros to read/write fields */ - -/* First shift, then mask */ -#define AR5K_REG_SM(_val, _flags) \ - (((_val) << _flags##_S) & (_flags)) - -/* First mask, then shift */ -#define AR5K_REG_MS(_val, _flags) \ - (((_val) & (_flags)) >> _flags##_S) - -/* Some registers can hold multiple values of interest. For this - * reason when we want to write to these registers we must first - * retrieve the values which we do not want to clear (lets call this - * old_data) and then set the register with this and our new_value: - * ( old_data | new_value) */ -#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ - (((_val) << _flags##_S) & (_flags)), _reg) - -#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ - (_mask)) | (_flags), _reg) - -#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ - ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) - -#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ - ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) - -/* Access to PHY registers */ -#define AR5K_PHY_READ(ah, _reg) \ - ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2)) - -#define AR5K_PHY_WRITE(ah, _reg, _val) \ - ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2)) - -/* Access QCU registers per queue */ -#define AR5K_REG_READ_Q(ah, _reg, _queue) \ - (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ - -#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ - ath5k_hw_reg_write(ah, (1 << _queue), _reg) - -#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ - _reg |= 1 << _queue; \ -} while (0) - -#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ - _reg &= ~(1 << _queue); \ -} while (0) - -/* Used while writing initvals */ -#define AR5K_REG_WAIT(_i) do { \ - if (_i % 64) \ - udelay(1); \ -} while (0) - -/* Register dumps are done per operation mode */ -#define AR5K_INI_RFGAIN_5GHZ 0 -#define AR5K_INI_RFGAIN_2GHZ 1 - -/* TODO: Clean this up */ -#define AR5K_INI_VAL_11A 0 -#define AR5K_INI_VAL_11A_TURBO 1 -#define AR5K_INI_VAL_11B 2 -#define AR5K_INI_VAL_11G 3 -#define AR5K_INI_VAL_11G_TURBO 4 -#define AR5K_INI_VAL_XR 0 -#define AR5K_INI_VAL_MAX 5 - -#define AR5K_RF5111_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS -#define AR5K_RF5112_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS - -/* Used for BSSID etc manipulation */ -#define AR5K_LOW_ID(_a)( \ -(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24 \ -) - -#define AR5K_HIGH_ID(_a) ((_a)[4] | (_a)[5] << 8) - -/* - * Some tuneable values (these should be changeable by the user) - * TODO: Make use of them and add more options OR use debug/configfs - */ -#define AR5K_TUNE_DMA_BEACON_RESP 2 -#define AR5K_TUNE_SW_BEACON_RESP 10 -#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 -#define AR5K_TUNE_RADAR_ALERT false -#define AR5K_TUNE_MIN_TX_FIFO_THRES 1 -#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_LEN / 64) + 1) -#define AR5K_TUNE_REGISTER_TIMEOUT 20000 -/* Register for RSSI threshold has a mask of 0xff, so 255 seems to - * be the max value. */ -#define AR5K_TUNE_RSSI_THRES 129 -/* This must be set when setting the RSSI threshold otherwise it can - * prevent a reset. If AR5K_RSSI_THR is read after writing to it - * the BMISS_THRES will be seen as 0, seems harware doesn't keep - * track of it. Max value depends on harware. For AR5210 this is just 7. - * For AR5211+ this seems to be up to 255. */ -#define AR5K_TUNE_BMISS_THRES 7 -#define AR5K_TUNE_REGISTER_DWELL_TIME 20000 -#define AR5K_TUNE_BEACON_INTERVAL 100 -#define AR5K_TUNE_AIFS 2 -#define AR5K_TUNE_AIFS_11B 2 -#define AR5K_TUNE_AIFS_XR 0 -#define AR5K_TUNE_CWMIN 15 -#define AR5K_TUNE_CWMIN_11B 31 -#define AR5K_TUNE_CWMIN_XR 3 -#define AR5K_TUNE_CWMAX 1023 -#define AR5K_TUNE_CWMAX_11B 1023 -#define AR5K_TUNE_CWMAX_XR 7 -#define AR5K_TUNE_NOISE_FLOOR -72 -#define AR5K_TUNE_MAX_TXPOWER 60 -#define AR5K_TUNE_DEFAULT_TXPOWER 30 -#define AR5K_TUNE_TPC_TXPOWER true -#define AR5K_TUNE_ANT_DIVERSITY true -#define AR5K_TUNE_HWTXTRIES 4 - -#define AR5K_INIT_CARR_SENSE_EN 1 - -/*Swap RX/TX Descriptor for big endian archs*/ -#if defined(__BIG_ENDIAN) -#define AR5K_INIT_CFG ( \ - AR5K_CFG_SWTD | AR5K_CFG_SWRD \ -) -#else -#define AR5K_INIT_CFG 0x00000000 -#endif - -/* Initial values */ -#define AR5K_INIT_TX_LATENCY 502 -#define AR5K_INIT_USEC 39 -#define AR5K_INIT_USEC_TURBO 79 -#define AR5K_INIT_USEC_32 31 -#define AR5K_INIT_SLOT_TIME 396 -#define AR5K_INIT_SLOT_TIME_TURBO 480 -#define AR5K_INIT_ACK_CTS_TIMEOUT 1024 -#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800 -#define AR5K_INIT_PROG_IFS 920 -#define AR5K_INIT_PROG_IFS_TURBO 960 -#define AR5K_INIT_EIFS 3440 -#define AR5K_INIT_EIFS_TURBO 6880 -#define AR5K_INIT_SIFS 560 -#define AR5K_INIT_SIFS_TURBO 480 -#define AR5K_INIT_SH_RETRY 10 -#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY -#define AR5K_INIT_SSH_RETRY 32 -#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY -#define AR5K_INIT_TX_RETRY 10 - -#define AR5K_INIT_TRANSMIT_LATENCY ( \ - (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ - (AR5K_INIT_USEC) \ -) -#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \ - (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ - (AR5K_INIT_USEC_TURBO) \ -) -#define AR5K_INIT_PROTO_TIME_CNTRL ( \ - (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \ - (AR5K_INIT_PROG_IFS) \ -) -#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \ - (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \ - (AR5K_INIT_PROG_IFS_TURBO) \ -) - -/* token to use for aifs, cwmin, cwmax in MadWiFi */ -#define AR5K_TXQ_USEDEFAULT ((u32) -1) - -/* GENERIC CHIPSET DEFINITIONS */ - -/* MAC Chips */ -enum ath5k_version { - AR5K_AR5210 = 0, - AR5K_AR5211 = 1, - AR5K_AR5212 = 2, -}; - -/* PHY Chips */ -enum ath5k_radio { - AR5K_RF5110 = 0, - AR5K_RF5111 = 1, - AR5K_RF5112 = 2, - AR5K_RF2413 = 3, - AR5K_RF5413 = 4, - AR5K_RF2316 = 5, - AR5K_RF2317 = 6, - AR5K_RF2425 = 7, -}; - -/* - * Common silicon revision/version values - */ - -enum ath5k_srev_type { - AR5K_VERSION_MAC, - AR5K_VERSION_RAD, -}; - -struct ath5k_srev_name { - const char *sr_name; - enum ath5k_srev_type sr_type; - u_int sr_val; -}; - -#define AR5K_SREV_UNKNOWN 0xffff - -#define AR5K_SREV_AR5210 0x00 /* Crete */ -#define AR5K_SREV_AR5311 0x10 /* Maui 1 */ -#define AR5K_SREV_AR5311A 0x20 /* Maui 2 */ -#define AR5K_SREV_AR5311B 0x30 /* Spirit */ -#define AR5K_SREV_AR5211 0x40 /* Oahu */ -#define AR5K_SREV_AR5212 0x50 /* Venice */ -#define AR5K_SREV_AR5213 0x55 /* ??? */ -#define AR5K_SREV_AR5213A 0x59 /* Hainan */ -#define AR5K_SREV_AR2413 0x78 /* Griffin lite */ -#define AR5K_SREV_AR2414 0x70 /* Griffin */ -#define AR5K_SREV_AR5424 0x90 /* Condor */ -#define AR5K_SREV_AR5413 0xa4 /* Eagle lite */ -#define AR5K_SREV_AR5414 0xa0 /* Eagle */ -#define AR5K_SREV_AR2415 0xb0 /* Cobra */ -#define AR5K_SREV_AR5416 0xc0 /* PCI-E */ -#define AR5K_SREV_AR5418 0xca /* PCI-E */ -#define AR5K_SREV_AR2425 0xe0 /* Swan */ -#define AR5K_SREV_AR2417 0xf0 /* Nala */ - -#define AR5K_SREV_RAD_5110 0x00 -#define AR5K_SREV_RAD_5111 0x10 -#define AR5K_SREV_RAD_5111A 0x15 -#define AR5K_SREV_RAD_2111 0x20 -#define AR5K_SREV_RAD_5112 0x30 -#define AR5K_SREV_RAD_5112A 0x35 -#define AR5K_SREV_RAD_5112B 0x36 -#define AR5K_SREV_RAD_2112 0x40 -#define AR5K_SREV_RAD_2112A 0x45 -#define AR5K_SREV_RAD_2112B 0x46 -#define AR5K_SREV_RAD_2413 0x50 -#define AR5K_SREV_RAD_5413 0x60 -#define AR5K_SREV_RAD_2316 0x70 -#define AR5K_SREV_RAD_2317 0x80 -#define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */ -#define AR5K_SREV_RAD_2425 0xa2 -#define AR5K_SREV_RAD_5133 0xc0 - -#define AR5K_SREV_PHY_5211 0x30 -#define AR5K_SREV_PHY_5212 0x41 -#define AR5K_SREV_PHY_2112B 0x43 -#define AR5K_SREV_PHY_2413 0x45 -#define AR5K_SREV_PHY_5413 0x61 -#define AR5K_SREV_PHY_2425 0x70 - -/* IEEE defs */ -#define IEEE80211_MAX_LEN 2500 - -/* TODO add support to mac80211 for vendor-specific rates and modes */ - -/* - * Some of this information is based on Documentation from: - * - * http://madwifi.org/wiki/ChipsetFeatures/SuperAG - * - * Modulation for Atheros' eXtended Range - range enhancing extension that is - * supposed to double the distance an Atheros client device can keep a - * connection with an Atheros access point. This is achieved by increasing - * the receiver sensitivity up to, -105dBm, which is about 20dB above what - * the 802.11 specifications demand. In addition, new (proprietary) data rates - * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. - * - * Please note that can you either use XR or TURBO but you cannot use both, - * they are exclusive. - * - */ -#define MODULATION_XR 0x00000200 -/* - * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a - * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s - * signaling rate achieved through the bonding of two 54Mbit/s 802.11g - * channels. To use this feature your Access Point must also suport it. - * There is also a distinction between "static" and "dynamic" turbo modes: - * - * - Static: is the dumb version: devices set to this mode stick to it until - * the mode is turned off. - * - Dynamic: is the intelligent version, the network decides itself if it - * is ok to use turbo. As soon as traffic is detected on adjacent channels - * (which would get used in turbo mode), or when a non-turbo station joins - * the network, turbo mode won't be used until the situation changes again. - * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which - * monitors the used radio band in order to decide whether turbo mode may - * be used or not. - * - * This article claims Super G sticks to bonding of channels 5 and 6 for - * USA: - * - * http://www.pcworld.com/article/id,113428-page,1/article.html - * - * The channel bonding seems to be driver specific though. In addition to - * deciding what channels will be used, these "Turbo" modes are accomplished - * by also enabling the following features: - * - * - Bursting: allows multiple frames to be sent at once, rather than pausing - * after each frame. Bursting is a standards-compliant feature that can be - * used with any Access Point. - * - Fast frames: increases the amount of information that can be sent per - * frame, also resulting in a reduction of transmission overhead. It is a - * proprietary feature that needs to be supported by the Access Point. - * - Compression: data frames are compressed in real time using a Lempel Ziv - * algorithm. This is done transparently. Once this feature is enabled, - * compression and decompression takes place inside the chipset, without - * putting additional load on the host CPU. - * - */ -#define MODULATION_TURBO 0x00000080 - -enum ath5k_driver_mode { - AR5K_MODE_11A = 0, - AR5K_MODE_11A_TURBO = 1, - AR5K_MODE_11B = 2, - AR5K_MODE_11G = 3, - AR5K_MODE_11G_TURBO = 4, - AR5K_MODE_XR = 0, - AR5K_MODE_MAX = 5 -}; - - -/****************\ - TX DEFINITIONS -\****************/ - -/* - * TX Status descriptor - */ -struct ath5k_tx_status { - u16 ts_seqnum; - u16 ts_tstamp; - u8 ts_status; - u8 ts_rate[4]; - u8 ts_retry[4]; - u8 ts_final_idx; - s8 ts_rssi; - u8 ts_shortretry; - u8 ts_longretry; - u8 ts_virtcol; - u8 ts_antenna; -}; - -#define AR5K_TXSTAT_ALTRATE 0x80 -#define AR5K_TXERR_XRETRY 0x01 -#define AR5K_TXERR_FILT 0x02 -#define AR5K_TXERR_FIFO 0x04 - -/** - * enum ath5k_tx_queue - Queue types used to classify tx queues. - * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue - * @AR5K_TX_QUEUE_DATA: A normal data queue - * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue - * @AR5K_TX_QUEUE_BEACON: The beacon queue - * @AR5K_TX_QUEUE_CAB: The after-beacon queue - * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue - */ -enum ath5k_tx_queue { - AR5K_TX_QUEUE_INACTIVE = 0, - AR5K_TX_QUEUE_DATA, - AR5K_TX_QUEUE_XR_DATA, - AR5K_TX_QUEUE_BEACON, - AR5K_TX_QUEUE_CAB, - AR5K_TX_QUEUE_UAPSD, -}; - -#define AR5K_NUM_TX_QUEUES 10 -#define AR5K_NUM_TX_QUEUES_NOQCU 2 - -/* - * Queue syb-types to classify normal data queues. - * These are the 4 Access Categories as defined in - * WME spec. 0 is the lowest priority and 4 is the - * highest. Normal data that hasn't been classified - * goes to the Best Effort AC. - */ -enum ath5k_tx_queue_subtype { - AR5K_WME_AC_BK = 0, /*Background traffic*/ - AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/ - AR5K_WME_AC_VI, /*Video traffic*/ - AR5K_WME_AC_VO, /*Voice traffic*/ -}; - -/* - * Queue ID numbers as returned by the hw functions, each number - * represents a hw queue. If hw does not support hw queues - * (eg 5210) all data goes in one queue. These match - * d80211 definitions (net80211/MadWiFi don't use them). - */ -enum ath5k_tx_queue_id { - AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, - AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, - AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/ - AR5K_TX_QUEUE_ID_DATA_MAX = 4, /*IEEE80211_TX_QUEUE_DATA4*/ - AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/ - AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/ - AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/ - AR5K_TX_QUEUE_ID_UAPSD = 8, - AR5K_TX_QUEUE_ID_XR_DATA = 9, -}; - -/* - * Flags to set hw queue's parameters... - */ -#define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */ -#define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */ -#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */ -#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */ -#define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */ -#define AR5K_TXQ_FLAG_CBRORNINT_ENABLE 0x0020 /* Enable CBRORN interrupt */ -#define AR5K_TXQ_FLAG_CBRURNINT_ENABLE 0x0040 /* Enable CBRURN interrupt */ -#define AR5K_TXQ_FLAG_QTRIGINT_ENABLE 0x0080 /* Enable QTRIG interrupt */ -#define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE 0x0100 /* Enable TXNOFRM interrupt */ -#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0200 /* Disable random post-backoff */ -#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300 /* Enable ready time expiry policy (?)*/ -#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800 /* Enable backoff while bursting */ -#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */ -#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/ - -/* - * A struct to hold tx queue's parameters - */ -struct ath5k_txq_info { - enum ath5k_tx_queue tqi_type; - enum ath5k_tx_queue_subtype tqi_subtype; - u16 tqi_flags; /* Tx queue flags (see above) */ - u32 tqi_aifs; /* Arbitrated Interframe Space */ - s32 tqi_cw_min; /* Minimum Contention Window */ - s32 tqi_cw_max; /* Maximum Contention Window */ - u32 tqi_cbr_period; /* Constant bit rate period */ - u32 tqi_cbr_overflow_limit; - u32 tqi_burst_time; - u32 tqi_ready_time; /* Not used */ -}; - -/* - * Transmit packet types. - * used on tx control descriptor - * TODO: Use them inside base.c corectly - */ -enum ath5k_pkt_type { - AR5K_PKT_TYPE_NORMAL = 0, - AR5K_PKT_TYPE_ATIM = 1, - AR5K_PKT_TYPE_PSPOLL = 2, - AR5K_PKT_TYPE_BEACON = 3, - AR5K_PKT_TYPE_PROBE_RESP = 4, - AR5K_PKT_TYPE_PIFS = 5, -}; - -/* - * TX power and TPC settings - */ -#define AR5K_TXPOWER_OFDM(_r, _v) ( \ - ((0 & 1) << ((_v) + 6)) | \ - (((ah->ah_txpower.txp_rates[(_r)]) & 0x3f) << (_v)) \ -) - -#define AR5K_TXPOWER_CCK(_r, _v) ( \ - (ah->ah_txpower.txp_rates[(_r)] & 0x3f) << (_v) \ -) - -/* - * DMA size definitions (2^n+2) - */ -enum ath5k_dmasize { - AR5K_DMASIZE_4B = 0, - AR5K_DMASIZE_8B, - AR5K_DMASIZE_16B, - AR5K_DMASIZE_32B, - AR5K_DMASIZE_64B, - AR5K_DMASIZE_128B, - AR5K_DMASIZE_256B, - AR5K_DMASIZE_512B -}; - - -/****************\ - RX DEFINITIONS -\****************/ - -/* - * RX Status descriptor - */ -struct ath5k_rx_status { - u16 rs_datalen; - u16 rs_tstamp; - u8 rs_status; - u8 rs_phyerr; - s8 rs_rssi; - u8 rs_keyix; - u8 rs_rate; - u8 rs_antenna; - u8 rs_more; -}; - -#define AR5K_RXERR_CRC 0x01 -#define AR5K_RXERR_PHY 0x02 -#define AR5K_RXERR_FIFO 0x04 -#define AR5K_RXERR_DECRYPT 0x08 -#define AR5K_RXERR_MIC 0x10 -#define AR5K_RXKEYIX_INVALID ((u8) - 1) -#define AR5K_TXKEYIX_INVALID ((u32) - 1) - - -/**************************\ - BEACON TIMERS DEFINITIONS -\**************************/ - -#define AR5K_BEACON_PERIOD 0x0000ffff -#define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/ -#define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/ - -#if 0 -/** - * struct ath5k_beacon_state - Per-station beacon timer state. - * @bs_interval: in TU's, can also include the above flags - * @bs_cfp_max_duration: if non-zero hw is setup to coexist with a - * Point Coordination Function capable AP - */ -struct ath5k_beacon_state { - u32 bs_next_beacon; - u32 bs_next_dtim; - u32 bs_interval; - u8 bs_dtim_period; - u8 bs_cfp_period; - u16 bs_cfp_max_duration; - u16 bs_cfp_du_remain; - u16 bs_tim_offset; - u16 bs_sleep_duration; - u16 bs_bmiss_threshold; - u32 bs_cfp_next; -}; -#endif - - -/* - * TSF to TU conversion: - * - * TSF is a 64bit value in usec (microseconds). - * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of - * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024). - */ -#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) - - -/*******************************\ - GAIN OPTIMIZATION DEFINITIONS -\*******************************/ - -enum ath5k_rfgain { - AR5K_RFGAIN_INACTIVE = 0, - AR5K_RFGAIN_READ_REQUESTED, - AR5K_RFGAIN_NEED_CHANGE, -}; - -#define AR5K_GAIN_CRN_FIX_BITS_5111 4 -#define AR5K_GAIN_CRN_FIX_BITS_5112 7 -#define AR5K_GAIN_CRN_MAX_FIX_BITS AR5K_GAIN_CRN_FIX_BITS_5112 -#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN 15 -#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN 20 -#define AR5K_GAIN_CCK_PROBE_CORR 5 -#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA 15 -#define AR5K_GAIN_STEP_COUNT 10 -#define AR5K_GAIN_PARAM_TX_CLIP 0 -#define AR5K_GAIN_PARAM_PD_90 1 -#define AR5K_GAIN_PARAM_PD_84 2 -#define AR5K_GAIN_PARAM_GAIN_SEL 3 -#define AR5K_GAIN_PARAM_MIX_ORN 0 -#define AR5K_GAIN_PARAM_PD_138 1 -#define AR5K_GAIN_PARAM_PD_137 2 -#define AR5K_GAIN_PARAM_PD_136 3 -#define AR5K_GAIN_PARAM_PD_132 4 -#define AR5K_GAIN_PARAM_PD_131 5 -#define AR5K_GAIN_PARAM_PD_130 6 -#define AR5K_GAIN_CHECK_ADJUST(_g) \ - ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high) - -struct ath5k_gain_opt_step { - s16 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS]; - s32 gos_gain; -}; - -struct ath5k_gain { - u32 g_step_idx; - u32 g_current; - u32 g_target; - u32 g_low; - u32 g_high; - u32 g_f_corr; - u32 g_active; - const struct ath5k_gain_opt_step *g_step; -}; - - -/********************\ - COMMON DEFINITIONS -\********************/ - -#define AR5K_SLOT_TIME_9 396 -#define AR5K_SLOT_TIME_20 880 -#define AR5K_SLOT_TIME_MAX 0xffff - -/* channel_flags */ -#define CHANNEL_CW_INT 0x0008 /* Contention Window interference detected */ -#define CHANNEL_TURBO 0x0010 /* Turbo Channel */ -#define CHANNEL_CCK 0x0020 /* CCK channel */ -#define CHANNEL_OFDM 0x0040 /* OFDM channel */ -#define CHANNEL_2GHZ 0x0080 /* 2GHz channel. */ -#define CHANNEL_5GHZ 0x0100 /* 5GHz channel */ -#define CHANNEL_PASSIVE 0x0200 /* Only passive scan allowed */ -#define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */ -#define CHANNEL_XR 0x0800 /* XR channel */ - -#define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM) -#define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK) -#define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM) -#define CHANNEL_T (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO) -#define CHANNEL_TG (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO) -#define CHANNEL_108A CHANNEL_T -#define CHANNEL_108G CHANNEL_TG -#define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR) - -#define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \ - CHANNEL_TURBO) - -#define CHANNEL_ALL_NOTURBO (CHANNEL_ALL & ~CHANNEL_TURBO) -#define CHANNEL_MODES CHANNEL_ALL - -/* - * Used internaly for reset_tx_queue). - * Also see struct struct ieee80211_channel. - */ -#define IS_CHAN_XR(_c) ((_c.hw_value & CHANNEL_XR) != 0) -#define IS_CHAN_B(_c) ((_c.hw_value & CHANNEL_B) != 0) - -/* - * The following structure is used to map 2GHz channels to - * 5GHz Atheros channels. - * TODO: Clean up - */ -struct ath5k_athchan_2ghz { - u32 a2_flags; - u16 a2_athchan; -}; - - -/******************\ - RATE DEFINITIONS -\******************/ - -/** - * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32. - * - * The rate code is used to get the RX rate or set the TX rate on the - * hardware descriptors. It is also used for internal modulation control - * and settings. - * - * This is the hardware rate map we are aware of: - * - * rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 - * rate_kbps 3000 1000 ? ? ? 2000 500 48000 - * - * rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10 - * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ? - * - * rate_code 17 18 19 20 21 22 23 24 - * rate_kbps ? ? ? ? ? ? ? 11000 - * - * rate_code 25 26 27 28 29 30 31 32 - * rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ? - * - * "S" indicates CCK rates with short preamble. - * - * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the - * lowest 4 bits, so they are the same as below with a 0xF mask. - * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). - * We handle this in ath5k_setup_bands(). - */ -#define AR5K_MAX_RATES 32 - -/* B */ -#define ATH5K_RATE_CODE_1M 0x1B -#define ATH5K_RATE_CODE_2M 0x1A -#define ATH5K_RATE_CODE_5_5M 0x19 -#define ATH5K_RATE_CODE_11M 0x18 -/* A and G */ -#define ATH5K_RATE_CODE_6M 0x0B -#define ATH5K_RATE_CODE_9M 0x0F -#define ATH5K_RATE_CODE_12M 0x0A -#define ATH5K_RATE_CODE_18M 0x0E -#define ATH5K_RATE_CODE_24M 0x09 -#define ATH5K_RATE_CODE_36M 0x0D -#define ATH5K_RATE_CODE_48M 0x08 -#define ATH5K_RATE_CODE_54M 0x0C -/* XR */ -#define ATH5K_RATE_CODE_XR_500K 0x07 -#define ATH5K_RATE_CODE_XR_1M 0x02 -#define ATH5K_RATE_CODE_XR_2M 0x06 -#define ATH5K_RATE_CODE_XR_3M 0x01 - -/* adding this flag to rate_code enables short preamble */ -#define AR5K_SET_SHORT_PREAMBLE 0x04 - -/* - * Crypto definitions - */ - -#define AR5K_KEYCACHE_SIZE 8 - -/***********************\ - HW RELATED DEFINITIONS -\***********************/ - -/* - * Misc definitions - */ -#define AR5K_RSSI_EP_MULTIPLIER (1<<7) - -#define AR5K_ASSERT_ENTRY(_e, _s) do { \ - if (_e >= _s) \ - return (false); \ -} while (0) - -/* - * Hardware interrupt abstraction - */ - -/** - * enum ath5k_int - Hardware interrupt masks helpers - * - * @AR5K_INT_RX: mask to identify received frame interrupts, of type - * AR5K_ISR_RXOK or AR5K_ISR_RXERR - * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?) - * @AR5K_INT_RXNOFRM: No frame received (?) - * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The - * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's - * LinkPtr is NULL. For more details, refer to: - * http://www.freepatentsonline.com/20030225739.html - * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors). - * Note that Rx overrun is not always fatal, on some chips we can continue - * operation without reseting the card, that's why int_fatal is not - * common for all chips. - * @AR5K_INT_TX: mask to identify received frame interrupts, of type - * AR5K_ISR_TXOK or AR5K_ISR_TXERR - * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?) - * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold - * We currently do increments on interrupt by - * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2 - * @AR5K_INT_MIB: Indicates the Management Information Base counters should be - * checked. We should do this with ath5k_hw_update_mib_counters() but - * it seems we should also then do some noise immunity work. - * @AR5K_INT_RXPHY: RX PHY Error - * @AR5K_INT_RXKCM: RX Key cache miss - * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a - * beacon that must be handled in software. The alternative is if you - * have VEOL support, in that case you let the hardware deal with things. - * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing - * beacons from the AP have associated with, we should probably try to - * reassociate. When in IBSS mode this might mean we have not received - * any beacons from any local stations. Note that every station in an - * IBSS schedules to send beacons at the Target Beacon Transmission Time - * (TBTT) with a random backoff. - * @AR5K_INT_BNR: Beacon Not Ready interrupt - ?? - * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now - * until properly handled - * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA - * errors. These types of errors we can enable seem to be of type - * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR. - * @AR5K_INT_GLOBAL: Used to clear and set the IER - * @AR5K_INT_NOCARD: signals the card has been removed - * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same - * bit value - * - * These are mapped to take advantage of some common bits - * between the MACs, to be able to set intr properties - * easier. Some of them are not used yet inside hw.c. Most map - * to the respective hw interrupt value as they are common amogst different - * MACs. - */ -enum ath5k_int { - AR5K_INT_RXOK = 0x00000001, - AR5K_INT_RXDESC = 0x00000002, - AR5K_INT_RXERR = 0x00000004, - AR5K_INT_RXNOFRM = 0x00000008, - AR5K_INT_RXEOL = 0x00000010, - AR5K_INT_RXORN = 0x00000020, - AR5K_INT_TXOK = 0x00000040, - AR5K_INT_TXDESC = 0x00000080, - AR5K_INT_TXERR = 0x00000100, - AR5K_INT_TXNOFRM = 0x00000200, - AR5K_INT_TXEOL = 0x00000400, - AR5K_INT_TXURN = 0x00000800, - AR5K_INT_MIB = 0x00001000, - AR5K_INT_SWI = 0x00002000, - AR5K_INT_RXPHY = 0x00004000, - AR5K_INT_RXKCM = 0x00008000, - AR5K_INT_SWBA = 0x00010000, - AR5K_INT_BRSSI = 0x00020000, - AR5K_INT_BMISS = 0x00040000, - AR5K_INT_FATAL = 0x00080000, /* Non common */ - AR5K_INT_BNR = 0x00100000, /* Non common */ - AR5K_INT_TIM = 0x00200000, /* Non common */ - AR5K_INT_DTIM = 0x00400000, /* Non common */ - AR5K_INT_DTIM_SYNC = 0x00800000, /* Non common */ - AR5K_INT_GPIO = 0x01000000, - AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */ - AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */ - AR5K_INT_RX_DOPPLER = 0x08000000, /* Non common */ - AR5K_INT_QCBRORN = 0x10000000, /* Non common */ - AR5K_INT_QCBRURN = 0x20000000, /* Non common */ - AR5K_INT_QTRIG = 0x40000000, /* Non common */ - AR5K_INT_GLOBAL = 0x80000000, - - AR5K_INT_COMMON = AR5K_INT_RXOK - | AR5K_INT_RXDESC - | AR5K_INT_RXERR - | AR5K_INT_RXNOFRM - | AR5K_INT_RXEOL - | AR5K_INT_RXORN - | AR5K_INT_TXOK - | AR5K_INT_TXDESC - | AR5K_INT_TXERR - | AR5K_INT_TXNOFRM - | AR5K_INT_TXEOL - | AR5K_INT_TXURN - | AR5K_INT_MIB - | AR5K_INT_SWI - | AR5K_INT_RXPHY - | AR5K_INT_RXKCM - | AR5K_INT_SWBA - | AR5K_INT_BRSSI - | AR5K_INT_BMISS - | AR5K_INT_GPIO - | AR5K_INT_GLOBAL, - - AR5K_INT_NOCARD = 0xffffffff -}; - -/* - * Power management - */ -enum ath5k_power_mode { - AR5K_PM_UNDEFINED = 0, - AR5K_PM_AUTO, - AR5K_PM_AWAKE, - AR5K_PM_FULL_SLEEP, - AR5K_PM_NETWORK_SLEEP, -}; - -/* - * These match net80211 definitions (not used in - * mac80211). - * TODO: Clean this up - */ -#define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/ -#define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/ -#define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/ -#define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/ -#define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/ - -/* GPIO-controlled software LED */ -#define AR5K_SOFTLED_PIN 0 -#define AR5K_SOFTLED_ON 0 -#define AR5K_SOFTLED_OFF 1 - -/* - * Chipset capabilities -see ath5k_hw_get_capability- - * get_capability function is not yet fully implemented - * in ath5k so most of these don't work yet... - * TODO: Implement these & merge with _TUNE_ stuff above - */ -enum ath5k_capability_type { - AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */ - AR5K_CAP_TKIP_MIC = 2, /* Can handle TKIP MIC in hardware */ - AR5K_CAP_TKIP_SPLIT = 3, /* TKIP uses split keys */ - AR5K_CAP_PHYCOUNTERS = 4, /* PHY error counters */ - AR5K_CAP_DIVERSITY = 5, /* Supports fast diversity */ - AR5K_CAP_NUM_TXQUEUES = 6, /* Used to get max number of hw txqueues */ - AR5K_CAP_VEOL = 7, /* Supports virtual EOL */ - AR5K_CAP_COMPRESSION = 8, /* Supports compression */ - AR5K_CAP_BURST = 9, /* Supports packet bursting */ - AR5K_CAP_FASTFRAME = 10, /* Supports fast frames */ - AR5K_CAP_TXPOW = 11, /* Used to get global tx power limit */ - AR5K_CAP_TPC = 12, /* Can do per-packet tx power control (needed for 802.11a) */ - AR5K_CAP_BSSIDMASK = 13, /* Supports bssid mask */ - AR5K_CAP_MCAST_KEYSRCH = 14, /* Supports multicast key search */ - AR5K_CAP_TSF_ADJUST = 15, /* Supports beacon tsf adjust */ - AR5K_CAP_XR = 16, /* Supports XR mode */ - AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */ - AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */ - AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */ - AR5K_CAP_RFSILENT = 20, /* Supports RFsilent */ -}; - - -/* XXX: we *may* move cap_range stuff to struct wiphy */ -struct ath5k_capabilities { - /* - * Supported PHY modes - * (ie. CHANNEL_A, CHANNEL_B, ...) - */ - DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX); - - /* - * Frequency range (without regulation restrictions) - */ - struct { - u16 range_2ghz_min; - u16 range_2ghz_max; - u16 range_5ghz_min; - u16 range_5ghz_max; - } cap_range; - - /* - * Values stored in the EEPROM (some of them...) - */ - struct ath5k_eeprom_info cap_eeprom; - - /* - * Queue information - */ - struct { - u8 q_tx_num; - } cap_queues; -}; - - -/***************************************\ - HARDWARE ABSTRACTION LAYER STRUCTURE -\***************************************/ - -/* - * Misc defines - */ - -#define AR5K_MAX_GPIO 10 -#define AR5K_MAX_RF_BANKS 8 - -/* TODO: Clean up and merge with ath5k_softc */ -struct ath5k_hw { - u32 ah_magic; - - struct ath5k_softc *ah_sc; - void __iomem *ah_iobase; - - enum ath5k_int ah_imr; - - enum nl80211_iftype ah_op_mode; - enum ath5k_power_mode ah_power_mode; - struct ieee80211_channel ah_current_channel; - bool ah_turbo; - bool ah_calibration; - bool ah_running; - bool ah_single_chip; - bool ah_combined_mic; - enum ath5k_rfgain ah_rf_gain; - - u32 ah_mac_srev; - u16 ah_mac_version; - u16 ah_mac_revision; - u16 ah_phy_revision; - u16 ah_radio_5ghz_revision; - u16 ah_radio_2ghz_revision; - u32 ah_phy_spending; - - enum ath5k_version ah_version; - enum ath5k_radio ah_radio; - u32 ah_phy; - - bool ah_5ghz; - bool ah_2ghz; - -#define ah_regdomain ah_capabilities.cap_regdomain.reg_current -#define ah_regdomain_hw ah_capabilities.cap_regdomain.reg_hw -#define ah_modes ah_capabilities.cap_mode -#define ah_ee_version ah_capabilities.cap_eeprom.ee_version - - u32 ah_atim_window; - u32 ah_aifs; - u32 ah_cw_min; - u32 ah_cw_max; - bool ah_software_retry; - u32 ah_limit_tx_retries; - - u32 ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; - bool ah_ant_diversity; - - u8 ah_sta_id[ETH_ALEN]; - - /* Current BSSID we are trying to assoc to / create. - * This is passed by mac80211 on config_interface() and cached here for - * use in resets */ - u8 ah_bssid[ETH_ALEN]; - u8 ah_bssid_mask[ETH_ALEN]; - - u32 ah_gpio[AR5K_MAX_GPIO]; - int ah_gpio_npins; - - struct ath5k_capabilities ah_capabilities; - - struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES]; - u32 ah_txq_status; - u32 ah_txq_imr_txok; - u32 ah_txq_imr_txerr; - u32 ah_txq_imr_txurn; - u32 ah_txq_imr_txdesc; - u32 ah_txq_imr_txeol; - u32 ah_txq_imr_cbrorn; - u32 ah_txq_imr_cbrurn; - u32 ah_txq_imr_qtrig; - u32 ah_txq_imr_nofrm; - u32 ah_txq_isr; - u32 *ah_rf_banks; - size_t ah_rf_banks_size; - struct ath5k_gain ah_gain; - u32 ah_offset[AR5K_MAX_RF_BANKS]; - - struct { - u16 txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE]; - u16 txp_rates[AR5K_MAX_RATES]; - s16 txp_min; - s16 txp_max; - bool txp_tpc; - s16 txp_ofdm; - } ah_txpower; - - struct { - bool r_enabled; - int r_last_alert; - struct ieee80211_channel r_last_channel; - } ah_radar; - - /* noise floor from last periodic calibration */ - s32 ah_noise_floor; - - /* - * Function pointers - */ - int (*ah_setup_rx_desc)(struct ath5k_hw *ah, struct ath5k_desc *desc, - u32 size, unsigned int flags); - int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, - unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, - unsigned int, unsigned int, unsigned int, unsigned int, - unsigned int, unsigned int, unsigned int); - int (*ah_setup_mrr_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, - unsigned int, unsigned int, unsigned int, unsigned int, - unsigned int, unsigned int); - int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_tx_status *); - int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_rx_status *); -}; - -/* - * Prototypes - */ - -/* Attach/Detach Functions */ -extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version); -extern void ath5k_hw_detach(struct ath5k_hw *ah); - -/* Reset Functions */ -extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial); -extern int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool change_channel); -/* Power management functions */ -extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration); - -/* DMA Related Functions */ -extern void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); -extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah); -extern u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah); -extern void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); -extern int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue); -extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue); -extern u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue); -extern int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, - u32 phys_addr); -extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase); -/* Interrupt handling */ -extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); -extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); -extern enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum -ath5k_int new_mask); -extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats); - -/* EEPROM access functions */ -extern int ath5k_eeprom_init(struct ath5k_hw *ah); -extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac); - -/* Protocol Control Unit Functions */ -extern int ath5k_hw_set_opmode(struct ath5k_hw *ah); -/* BSSID Functions */ -extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac); -extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); -extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id); -extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); -/* Receive start/stop functions */ -extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); -extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); -/* RX Filter functions */ -extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); -extern int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index); -extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index); -extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); -extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); -/* Beacon control functions */ -extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah); -extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); -extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah); -extern void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval); -#if 0 -extern int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, const struct ath5k_beacon_state *state); -extern void ath5k_hw_reset_beacon(struct ath5k_hw *ah); -extern int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr); -#endif -/* ACK bit rate */ -void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high); -/* ACK/CTS Timeouts */ -extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout); -extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah); -extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout); -extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah); -/* Key table (WEP) functions */ -extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry); -extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry); -extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac); -extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac); - -/* Queue Control Unit, DFS Control Unit Functions */ -extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info); -extern int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, - const struct ath5k_txq_info *queue_info); -extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, - enum ath5k_tx_queue queue_type, - struct ath5k_txq_info *queue_info); -extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); -extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); -extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); -extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah); -extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); - -/* Hardware Descriptor Functions */ -extern int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); - -/* GPIO Functions */ -extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); -extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); -extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); -extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); -extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); -extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level); - -/* Misc functions */ -int ath5k_hw_set_capabilities(struct ath5k_hw *ah); -extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result); -extern int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); -extern int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); - -/* Initial register settings functions */ -extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); - -/* Initialize RF */ -extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode); -extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq); -extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah); -extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah); -/* PHY/RF channel functions */ -extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags); -extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel); -/* PHY calibration */ -extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel); -extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq); -/* Misc PHY functions */ -extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); -extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant); -extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah); -extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); -/* TX power setup */ -extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower); -extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power); - -/* - * Functions used internaly - */ - -/* - * Translate usec to hw clock units - */ -static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo) -{ - return turbo ? (usec * 80) : (usec * 40); -} - -/* - * Translate hw clock units to usec - */ -static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo) -{ - return turbo ? (clock / 80) : (clock / 40); -} - -/* - * Read from a register - */ -static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) -{ - return ioread32(ah->ah_iobase + reg); -} - -/* - * Write to a register - */ -static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) -{ - iowrite32(val, ah->ah_iobase + reg); -} - -#if defined(_ATH5K_RESET) || defined(_ATH5K_PHY) -/* - * Check if a register write has been completed - */ -static int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, - u32 val, bool is_set) -{ - int i; - u32 data; - - for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) { - data = ath5k_hw_reg_read(ah, reg); - if (is_set && (data & flag)) - break; - else if ((data & flag) == val) - break; - udelay(15); - } - - return (i <= 0) ? -EAGAIN : 0; -} -#endif - -static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) -{ - u32 retval = 0, bit, i; - - for (i = 0; i < bits; i++) { - bit = (val >> i) & 1; - retval = (retval << 1) | bit; - } - - return retval; -} - -static inline int ath5k_pad_size(int hdrlen) -{ - return (hdrlen < 24) ? 0 : hdrlen & 3; -} - -#endif diff --git a/drivers/net/wireless/ath5k/attach.c b/drivers/net/wireless/ath5k/attach.c deleted file mode 100644 index dea378f7673..00000000000 --- a/drivers/net/wireless/ath5k/attach.c +++ /dev/null @@ -1,359 +0,0 @@ -/* - * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -/*************************************\ -* Attach/Detach Functions and helpers * -\*************************************/ - -#include <linux/pci.h> -#include "ath5k.h" -#include "reg.h" -#include "debug.h" -#include "base.h" - -/** - * ath5k_hw_post - Power On Self Test helper function - * - * @ah: The &struct ath5k_hw - */ -static int ath5k_hw_post(struct ath5k_hw *ah) -{ - - int i, c; - u16 cur_reg; - u16 regs[2] = {AR5K_STA_ID0, AR5K_PHY(8)}; - u32 var_pattern; - u32 static_pattern[4] = { - 0x55555555, 0xaaaaaaaa, - 0x66666666, 0x99999999 - }; - u32 init_val; - u32 cur_val; - - for (c = 0; c < 2; c++) { - - cur_reg = regs[c]; - - /* Save previous value */ - init_val = ath5k_hw_reg_read(ah, cur_reg); - - for (i = 0; i < 256; i++) { - var_pattern = i << 16 | i; - ath5k_hw_reg_write(ah, var_pattern, cur_reg); - cur_val = ath5k_hw_reg_read(ah, cur_reg); - - if (cur_val != var_pattern) { - ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); - return -EAGAIN; - } - - /* Found on ndiswrapper dumps */ - var_pattern = 0x0039080f; - ath5k_hw_reg_write(ah, var_pattern, cur_reg); - } - - for (i = 0; i < 4; i++) { - var_pattern = static_pattern[i]; - ath5k_hw_reg_write(ah, var_pattern, cur_reg); - cur_val = ath5k_hw_reg_read(ah, cur_reg); - - if (cur_val != var_pattern) { - ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); - return -EAGAIN; - } - - /* Found on ndiswrapper dumps */ - var_pattern = 0x003b080f; - ath5k_hw_reg_write(ah, var_pattern, cur_reg); - } - - /* Restore previous value */ - ath5k_hw_reg_write(ah, init_val, cur_reg); - - } - - return 0; - -} - -/** - * ath5k_hw_attach - Check if hw is supported and init the needed structs - * - * @sc: The &struct ath5k_softc we got from the driver's attach function - * @mac_version: The mac version id (check out ath5k.h) based on pci id - * - * Check if the device is supported, perform a POST and initialize the needed - * structs. Returns -ENOMEM if we don't have memory for the needed structs, - * -ENODEV if the device is not supported or prints an error msg if something - * else went wrong. - */ -struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) -{ - struct ath5k_hw *ah; - struct pci_dev *pdev = sc->pdev; - u8 mac[ETH_ALEN] = {}; - int ret; - u32 srev; - - /*If we passed the test malloc a ath5k_hw struct*/ - ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL); - if (ah == NULL) { - ret = -ENOMEM; - ATH5K_ERR(sc, "out of memory\n"); - goto err; - } - - ah->ah_sc = sc; - ah->ah_iobase = sc->iobase; - - /* - * HW information - */ - ah->ah_op_mode = NL80211_IFTYPE_STATION; - ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT; - ah->ah_turbo = false; - ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; - ah->ah_imr = 0; - ah->ah_atim_window = 0; - ah->ah_aifs = AR5K_TUNE_AIFS; - ah->ah_cw_min = AR5K_TUNE_CWMIN; - ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY; - ah->ah_software_retry = false; - ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY; - - /* - * Set the mac version based on the pci id - */ - ah->ah_version = mac_version; - - /*Fill the ath5k_hw struct with the needed functions*/ - ret = ath5k_hw_init_desc_functions(ah); - if (ret) - goto err_free; - - /* Bring device out of sleep and reset it's units */ - ret = ath5k_hw_nic_wakeup(ah, CHANNEL_B, true); - if (ret) - goto err_free; - - /* Get MAC, PHY and RADIO revisions */ - srev = ath5k_hw_reg_read(ah, AR5K_SREV); - ah->ah_mac_srev = srev; - ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER); - ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV); - ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) & - 0xffffffff; - ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah, - CHANNEL_5GHZ); - ah->ah_phy = AR5K_PHY(0); - - /* Try to identify radio chip based on it's srev */ - switch (ah->ah_radio_5ghz_revision & 0xf0) { - case AR5K_SREV_RAD_5111: - ah->ah_radio = AR5K_RF5111; - ah->ah_single_chip = false; - ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, - CHANNEL_2GHZ); - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111; - break; - case AR5K_SREV_RAD_5112: - case AR5K_SREV_RAD_2112: - ah->ah_radio = AR5K_RF5112; - ah->ah_single_chip = false; - ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, - CHANNEL_2GHZ); - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112; - break; - case AR5K_SREV_RAD_2413: - ah->ah_radio = AR5K_RF2413; - ah->ah_single_chip = true; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; - break; - case AR5K_SREV_RAD_5413: - ah->ah_radio = AR5K_RF5413; - ah->ah_single_chip = true; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; - break; - case AR5K_SREV_RAD_2316: - ah->ah_radio = AR5K_RF2316; - ah->ah_single_chip = true; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2316; - break; - case AR5K_SREV_RAD_2317: - ah->ah_radio = AR5K_RF2317; - ah->ah_single_chip = true; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2317; - break; - case AR5K_SREV_RAD_5424: - if (ah->ah_mac_version == AR5K_SREV_AR2425 || - ah->ah_mac_version == AR5K_SREV_AR2417){ - ah->ah_radio = AR5K_RF2425; - ah->ah_single_chip = true; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425; - } else { - ah->ah_radio = AR5K_RF5413; - ah->ah_single_chip = true; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; - } - break; - default: - /* Identify radio based on mac/phy srev */ - if (ah->ah_version == AR5K_AR5210) { - ah->ah_radio = AR5K_RF5110; - ah->ah_single_chip = false; - } else if (ah->ah_version == AR5K_AR5211) { - ah->ah_radio = AR5K_RF5111; - ah->ah_single_chip = false; - ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, - CHANNEL_2GHZ); - } else if (ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4) || - ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4) || - ah->ah_phy_revision == AR5K_SREV_PHY_2425) { - ah->ah_radio = AR5K_RF2425; - ah->ah_single_chip = true; - ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2425; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425; - } else if (srev == AR5K_SREV_AR5213A && - ah->ah_phy_revision == AR5K_SREV_PHY_2112B) { - ah->ah_radio = AR5K_RF5112; - ah->ah_single_chip = false; - ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2112B; - } else if (ah->ah_mac_version == (AR5K_SREV_AR2415 >> 4)) { - ah->ah_radio = AR5K_RF2316; - ah->ah_single_chip = true; - ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2316; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2316; - } else if (ah->ah_mac_version == (AR5K_SREV_AR5414 >> 4) || - ah->ah_phy_revision == AR5K_SREV_PHY_5413) { - ah->ah_radio = AR5K_RF5413; - ah->ah_single_chip = true; - ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5413; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; - } else if (ah->ah_mac_version == (AR5K_SREV_AR2414 >> 4) || - ah->ah_phy_revision == AR5K_SREV_PHY_2413) { - ah->ah_radio = AR5K_RF2413; - ah->ah_single_chip = true; - ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2413; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; - } else { - ATH5K_ERR(sc, "Couldn't identify radio revision.\n"); - ret = -ENODEV; - goto err_free; - } - } - - - /* Return on unsuported chips (unsupported eeprom etc) */ - if ((srev >= AR5K_SREV_AR5416) && - (srev < AR5K_SREV_AR2425)) { - ATH5K_ERR(sc, "Device not yet supported.\n"); - ret = -ENODEV; - goto err_free; - } - - /* - * Write PCI-E power save settings - */ - if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) { - ath5k_hw_reg_write(ah, 0x9248fc00, AR5K_PCIE_SERDES); - ath5k_hw_reg_write(ah, 0x24924924, AR5K_PCIE_SERDES); - /* Shut off RX when elecidle is asserted */ - ath5k_hw_reg_write(ah, 0x28000039, AR5K_PCIE_SERDES); - ath5k_hw_reg_write(ah, 0x53160824, AR5K_PCIE_SERDES); - /* TODO: EEPROM work */ - ath5k_hw_reg_write(ah, 0xe5980579, AR5K_PCIE_SERDES); - /* Shut off PLL and CLKREQ active in L1 */ - ath5k_hw_reg_write(ah, 0x001defff, AR5K_PCIE_SERDES); - /* Preserce other settings */ - ath5k_hw_reg_write(ah, 0x1aaabe40, AR5K_PCIE_SERDES); - ath5k_hw_reg_write(ah, 0xbe105554, AR5K_PCIE_SERDES); - ath5k_hw_reg_write(ah, 0x000e3007, AR5K_PCIE_SERDES); - /* Reset SERDES to load new settings */ - ath5k_hw_reg_write(ah, 0x00000000, AR5K_PCIE_SERDES_RESET); - mdelay(1); - } - - /* - * POST - */ - ret = ath5k_hw_post(ah); - if (ret) - goto err_free; - - /* Enable pci core retry fix on Hainan (5213A) and later chips */ - if (srev >= AR5K_SREV_AR5213A) - ath5k_hw_reg_write(ah, AR5K_PCICFG_RETRY_FIX, AR5K_PCICFG); - - /* - * Get card capabilities, calibration values etc - * TODO: EEPROM work - */ - ret = ath5k_eeprom_init(ah); - if (ret) { - ATH5K_ERR(sc, "unable to init EEPROM\n"); - goto err_free; - } - - /* Get misc capabilities */ - ret = ath5k_hw_set_capabilities(ah); - if (ret) { - ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n", - sc->pdev->device); - goto err_free; - } - - if (srev >= AR5K_SREV_AR2414) { - ah->ah_combined_mic = true; - AR5K_REG_ENABLE_BITS(ah, AR5K_MISC_MODE, - AR5K_MISC_MODE_COMBINED_MIC); - } - - /* MAC address is cleared until add_interface */ - ath5k_hw_set_lladdr(ah, mac); - - /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */ - memset(ah->ah_bssid, 0xff, ETH_ALEN); - ath5k_hw_set_associd(ah, ah->ah_bssid, 0); - ath5k_hw_set_opmode(ah); - - ath5k_hw_set_rfgain_opt(ah); - - return ah; -err_free: - kfree(ah); -err: - return ERR_PTR(ret); -} - -/** - * ath5k_hw_detach - Free the ath5k_hw struct - * - * @ah: The &struct ath5k_hw - */ -void ath5k_hw_detach(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - - __set_bit(ATH_STAT_INVALID, ah->ah_sc->status); - - if (ah->ah_rf_banks != NULL) - kfree(ah->ah_rf_banks); - - /* assume interrupts are down */ - kfree(ah); -} diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c deleted file mode 100644 index 1d77ee9d6e9..00000000000 --- a/drivers/net/wireless/ath5k/base.c +++ /dev/null @@ -1,3171 +0,0 @@ -/*- - * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting - * Copyright (c) 2004-2005 Atheros Communications, Inc. - * Copyright (c) 2006 Devicescape Software, Inc. - * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> - * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> - * - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any - * redistribution must be conditioned upon including a substantially - * similar Disclaimer requirement for further binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY - * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL - * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, - * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER - * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - * THE POSSIBILITY OF SUCH DAMAGES. - * - */ - -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/hardirq.h> -#include <linux/if.h> -#include <linux/io.h> -#include <linux/netdevice.h> -#include <linux/cache.h> -#include <linux/pci.h> -#include <linux/ethtool.h> -#include <linux/uaccess.h> - -#include <net/ieee80211_radiotap.h> - -#include <asm/unaligned.h> - -#include "base.h" -#include "reg.h" -#include "debug.h" - -static int ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */ -static int modparam_nohwcrypt; -module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444); -MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); - - -/******************\ -* Internal defines * -\******************/ - -/* Module info */ -MODULE_AUTHOR("Jiri Slaby"); -MODULE_AUTHOR("Nick Kossifidis"); -MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards."); -MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards"); -MODULE_LICENSE("Dual BSD/GPL"); -MODULE_VERSION("0.6.0 (EXPERIMENTAL)"); - - -/* Known PCI ids */ -static struct pci_device_id ath5k_pci_id_table[] __devinitdata = { - { PCI_VDEVICE(ATHEROS, 0x0207), .driver_data = AR5K_AR5210 }, /* 5210 early */ - { PCI_VDEVICE(ATHEROS, 0x0007), .driver_data = AR5K_AR5210 }, /* 5210 */ - { PCI_VDEVICE(ATHEROS, 0x0011), .driver_data = AR5K_AR5211 }, /* 5311 - this is on AHB bus !*/ - { PCI_VDEVICE(ATHEROS, 0x0012), .driver_data = AR5K_AR5211 }, /* 5211 */ - { PCI_VDEVICE(ATHEROS, 0x0013), .driver_data = AR5K_AR5212 }, /* 5212 */ - { PCI_VDEVICE(3COM_2, 0x0013), .driver_data = AR5K_AR5212 }, /* 3com 5212 */ - { PCI_VDEVICE(3COM, 0x0013), .driver_data = AR5K_AR5212 }, /* 3com 3CRDAG675 5212 */ - { PCI_VDEVICE(ATHEROS, 0x1014), .driver_data = AR5K_AR5212 }, /* IBM minipci 5212 */ - { PCI_VDEVICE(ATHEROS, 0x0014), .driver_data = AR5K_AR5212 }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0015), .driver_data = AR5K_AR5212 }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0016), .driver_data = AR5K_AR5212 }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0017), .driver_data = AR5K_AR5212 }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0018), .driver_data = AR5K_AR5212 }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0019), .driver_data = AR5K_AR5212 }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x001a), .driver_data = AR5K_AR5212 }, /* 2413 Griffin-lite */ - { PCI_VDEVICE(ATHEROS, 0x001b), .driver_data = AR5K_AR5212 }, /* 5413 Eagle */ - { PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* PCI-E cards */ - { PCI_VDEVICE(ATHEROS, 0x001d), .driver_data = AR5K_AR5212 }, /* 2417 Nala */ - { 0 } -}; -MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table); - -/* Known SREVs */ -static struct ath5k_srev_name srev_names[] = { - { "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 }, - { "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 }, - { "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A }, - { "5311B", AR5K_VERSION_MAC, AR5K_SREV_AR5311B }, - { "5211", AR5K_VERSION_MAC, AR5K_SREV_AR5211 }, - { "5212", AR5K_VERSION_MAC, AR5K_SREV_AR5212 }, - { "5213", AR5K_VERSION_MAC, AR5K_SREV_AR5213 }, - { "5213A", AR5K_VERSION_MAC, AR5K_SREV_AR5213A }, - { "2413", AR5K_VERSION_MAC, AR5K_SREV_AR2413 }, - { "2414", AR5K_VERSION_MAC, AR5K_SREV_AR2414 }, - { "5424", AR5K_VERSION_MAC, AR5K_SREV_AR5424 }, - { "5413", AR5K_VERSION_MAC, AR5K_SREV_AR5413 }, - { "5414", AR5K_VERSION_MAC, AR5K_SREV_AR5414 }, - { "2415", AR5K_VERSION_MAC, AR5K_SREV_AR2415 }, - { "5416", AR5K_VERSION_MAC, AR5K_SREV_AR5416 }, - { "5418", AR5K_VERSION_MAC, AR5K_SREV_AR5418 }, - { "2425", AR5K_VERSION_MAC, AR5K_SREV_AR2425 }, - { "2417", AR5K_VERSION_MAC, AR5K_SREV_AR2417 }, - { "xxxxx", AR5K_VERSION_MAC, AR5K_SREV_UNKNOWN }, - { "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 }, - { "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 }, - { "5111A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111A }, - { "2111", AR5K_VERSION_RAD, AR5K_SREV_RAD_2111 }, - { "5112", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112 }, - { "5112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112A }, - { "5112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112B }, - { "2112", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112 }, - { "2112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112A }, - { "2112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112B }, - { "2413", AR5K_VERSION_RAD, AR5K_SREV_RAD_2413 }, - { "5413", AR5K_VERSION_RAD, AR5K_SREV_RAD_5413 }, - { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 }, - { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 }, - { "5424", AR5K_VERSION_RAD, AR5K_SREV_RAD_5424 }, - { "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 }, - { "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN }, -}; - -static struct ieee80211_rate ath5k_rates[] = { - { .bitrate = 10, - .hw_value = ATH5K_RATE_CODE_1M, }, - { .bitrate = 20, - .hw_value = ATH5K_RATE_CODE_2M, - .hw_value_short = ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE, - .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 55, - .hw_value = ATH5K_RATE_CODE_5_5M, - .hw_value_short = ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE, - .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 110, - .hw_value = ATH5K_RATE_CODE_11M, - .hw_value_short = ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE, - .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 60, - .hw_value = ATH5K_RATE_CODE_6M, - .flags = 0 }, - { .bitrate = 90, - .hw_value = ATH5K_RATE_CODE_9M, - .flags = 0 }, - { .bitrate = 120, - .hw_value = ATH5K_RATE_CODE_12M, - .flags = 0 }, - { .bitrate = 180, - .hw_value = ATH5K_RATE_CODE_18M, - .flags = 0 }, - { .bitrate = 240, - .hw_value = ATH5K_RATE_CODE_24M, - .flags = 0 }, - { .bitrate = 360, - .hw_value = ATH5K_RATE_CODE_36M, - .flags = 0 }, - { .bitrate = 480, - .hw_value = ATH5K_RATE_CODE_48M, - .flags = 0 }, - { .bitrate = 540, - .hw_value = ATH5K_RATE_CODE_54M, - .flags = 0 }, - /* XR missing */ -}; - -/* - * Prototypes - PCI stack related functions - */ -static int __devinit ath5k_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *id); -static void __devexit ath5k_pci_remove(struct pci_dev *pdev); -#ifdef CONFIG_PM -static int ath5k_pci_suspend(struct pci_dev *pdev, - pm_message_t state); -static int ath5k_pci_resume(struct pci_dev *pdev); -#else -#define ath5k_pci_suspend NULL -#define ath5k_pci_resume NULL -#endif /* CONFIG_PM */ - -static struct pci_driver ath5k_pci_driver = { - .name = KBUILD_MODNAME, - .id_table = ath5k_pci_id_table, - .probe = ath5k_pci_probe, - .remove = __devexit_p(ath5k_pci_remove), - .suspend = ath5k_pci_suspend, - .resume = ath5k_pci_resume, -}; - - - -/* - * Prototypes - MAC 802.11 stack related functions - */ -static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb); -static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel); -static int ath5k_reset_wake(struct ath5k_softc *sc); -static int ath5k_start(struct ieee80211_hw *hw); -static void ath5k_stop(struct ieee80211_hw *hw); -static int ath5k_add_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf); -static void ath5k_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf); -static int ath5k_config(struct ieee80211_hw *hw, u32 changed); -static int ath5k_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf); -static void ath5k_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *new_flags, - int mc_count, struct dev_mc_list *mclist); -static int ath5k_set_key(struct ieee80211_hw *hw, - enum set_key_cmd cmd, - const u8 *local_addr, const u8 *addr, - struct ieee80211_key_conf *key); -static int ath5k_get_stats(struct ieee80211_hw *hw, - struct ieee80211_low_level_stats *stats); -static int ath5k_get_tx_stats(struct ieee80211_hw *hw, - struct ieee80211_tx_queue_stats *stats); -static u64 ath5k_get_tsf(struct ieee80211_hw *hw); -static void ath5k_reset_tsf(struct ieee80211_hw *hw); -static int ath5k_beacon_update(struct ath5k_softc *sc, - struct sk_buff *skb); -static void ath5k_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, - u32 changes); - -static struct ieee80211_ops ath5k_hw_ops = { - .tx = ath5k_tx, - .start = ath5k_start, - .stop = ath5k_stop, - .add_interface = ath5k_add_interface, - .remove_interface = ath5k_remove_interface, - .config = ath5k_config, - .config_interface = ath5k_config_interface, - .configure_filter = ath5k_configure_filter, - .set_key = ath5k_set_key, - .get_stats = ath5k_get_stats, - .conf_tx = NULL, - .get_tx_stats = ath5k_get_tx_stats, - .get_tsf = ath5k_get_tsf, - .reset_tsf = ath5k_reset_tsf, - .bss_info_changed = ath5k_bss_info_changed, -}; - -/* - * Prototypes - Internal functions - */ -/* Attach detach */ -static int ath5k_attach(struct pci_dev *pdev, - struct ieee80211_hw *hw); -static void ath5k_detach(struct pci_dev *pdev, - struct ieee80211_hw *hw); -/* Channel/mode setup */ -static inline short ath5k_ieee2mhz(short chan); -static unsigned int ath5k_copy_channels(struct ath5k_hw *ah, - struct ieee80211_channel *channels, - unsigned int mode, - unsigned int max); -static int ath5k_setup_bands(struct ieee80211_hw *hw); -static int ath5k_chan_set(struct ath5k_softc *sc, - struct ieee80211_channel *chan); -static void ath5k_setcurmode(struct ath5k_softc *sc, - unsigned int mode); -static void ath5k_mode_setup(struct ath5k_softc *sc); - -/* Descriptor setup */ -static int ath5k_desc_alloc(struct ath5k_softc *sc, - struct pci_dev *pdev); -static void ath5k_desc_free(struct ath5k_softc *sc, - struct pci_dev *pdev); -/* Buffers setup */ -static int ath5k_rxbuf_setup(struct ath5k_softc *sc, - struct ath5k_buf *bf); -static int ath5k_txbuf_setup(struct ath5k_softc *sc, - struct ath5k_buf *bf); -static inline void ath5k_txbuf_free(struct ath5k_softc *sc, - struct ath5k_buf *bf) -{ - BUG_ON(!bf); - if (!bf->skb) - return; - pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len, - PCI_DMA_TODEVICE); - dev_kfree_skb_any(bf->skb); - bf->skb = NULL; -} - -/* Queues setup */ -static struct ath5k_txq *ath5k_txq_setup(struct ath5k_softc *sc, - int qtype, int subtype); -static int ath5k_beaconq_setup(struct ath5k_hw *ah); -static int ath5k_beaconq_config(struct ath5k_softc *sc); -static void ath5k_txq_drainq(struct ath5k_softc *sc, - struct ath5k_txq *txq); -static void ath5k_txq_cleanup(struct ath5k_softc *sc); -static void ath5k_txq_release(struct ath5k_softc *sc); -/* Rx handling */ -static int ath5k_rx_start(struct ath5k_softc *sc); -static void ath5k_rx_stop(struct ath5k_softc *sc); -static unsigned int ath5k_rx_decrypted(struct ath5k_softc *sc, - struct ath5k_desc *ds, - struct sk_buff *skb, - struct ath5k_rx_status *rs); -static void ath5k_tasklet_rx(unsigned long data); -/* Tx handling */ -static void ath5k_tx_processq(struct ath5k_softc *sc, - struct ath5k_txq *txq); -static void ath5k_tasklet_tx(unsigned long data); -/* Beacon handling */ -static int ath5k_beacon_setup(struct ath5k_softc *sc, - struct ath5k_buf *bf); -static void ath5k_beacon_send(struct ath5k_softc *sc); -static void ath5k_beacon_config(struct ath5k_softc *sc); -static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf); - -static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp) -{ - u64 tsf = ath5k_hw_get_tsf64(ah); - - if ((tsf & 0x7fff) < rstamp) - tsf -= 0x8000; - - return (tsf & ~0x7fff) | rstamp; -} - -/* Interrupt handling */ -static int ath5k_init(struct ath5k_softc *sc, bool is_resume); -static int ath5k_stop_locked(struct ath5k_softc *sc); -static int ath5k_stop_hw(struct ath5k_softc *sc, bool is_suspend); -static irqreturn_t ath5k_intr(int irq, void *dev_id); -static void ath5k_tasklet_reset(unsigned long data); - -static void ath5k_calibrate(unsigned long data); -/* LED functions */ -static int ath5k_init_leds(struct ath5k_softc *sc); -static void ath5k_led_enable(struct ath5k_softc *sc); -static void ath5k_led_off(struct ath5k_softc *sc); -static void ath5k_unregister_leds(struct ath5k_softc *sc); - -/* - * Module init/exit functions - */ -static int __init -init_ath5k_pci(void) -{ - int ret; - - ath5k_debug_init(); - - ret = pci_register_driver(&ath5k_pci_driver); - if (ret) { - printk(KERN_ERR "ath5k_pci: can't register pci driver\n"); - return ret; - } - - return 0; -} - -static void __exit -exit_ath5k_pci(void) -{ - pci_unregister_driver(&ath5k_pci_driver); - - ath5k_debug_finish(); -} - -module_init(init_ath5k_pci); -module_exit(exit_ath5k_pci); - - -/********************\ -* PCI Initialization * -\********************/ - -static const char * -ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val) -{ - const char *name = "xxxxx"; - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(srev_names); i++) { - if (srev_names[i].sr_type != type) - continue; - - if ((val & 0xf0) == srev_names[i].sr_val) - name = srev_names[i].sr_name; - - if ((val & 0xff) == srev_names[i].sr_val) { - name = srev_names[i].sr_name; - break; - } - } - - return name; -} - -static int __devinit -ath5k_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - void __iomem *mem; - struct ath5k_softc *sc; - struct ieee80211_hw *hw; - int ret; - u8 csz; - - ret = pci_enable_device(pdev); - if (ret) { - dev_err(&pdev->dev, "can't enable device\n"); - goto err; - } - - /* XXX 32-bit addressing only */ - ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (ret) { - dev_err(&pdev->dev, "32-bit DMA not available\n"); - goto err_dis; - } - - /* - * Cache line size is used to size and align various - * structures used to communicate with the hardware. - */ - pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); - if (csz == 0) { - /* - * Linux 2.4.18 (at least) writes the cache line size - * register as a 16-bit wide register which is wrong. - * We must have this setup properly for rx buffer - * DMA to work so force a reasonable value here if it - * comes up zero. - */ - csz = L1_CACHE_BYTES / sizeof(u32); - pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); - } - /* - * The default setting of latency timer yields poor results, - * set it to the value used by other systems. It may be worth - * tweaking this setting more. - */ - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); - - /* Enable bus mastering */ - pci_set_master(pdev); - - /* - * Disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state. - */ - pci_write_config_byte(pdev, 0x41, 0); - - ret = pci_request_region(pdev, 0, "ath5k"); - if (ret) { - dev_err(&pdev->dev, "cannot reserve PCI memory region\n"); - goto err_dis; - } - - mem = pci_iomap(pdev, 0, 0); - if (!mem) { - dev_err(&pdev->dev, "cannot remap PCI memory region\n") ; - ret = -EIO; - goto err_reg; - } - - /* - * Allocate hw (mac80211 main struct) - * and hw->priv (driver private data) - */ - hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops); - if (hw == NULL) { - dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n"); - ret = -ENOMEM; - goto err_map; - } - - dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy)); - - /* Initialize driver private data */ - SET_IEEE80211_DEV(hw, &pdev->dev); - hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_NOISE_DBM; - - hw->wiphy->interface_modes = - BIT(NL80211_IFTYPE_STATION) | - BIT(NL80211_IFTYPE_ADHOC) | - BIT(NL80211_IFTYPE_MESH_POINT); - - hw->extra_tx_headroom = 2; - hw->channel_change_time = 5000; - sc = hw->priv; - sc->hw = hw; - sc->pdev = pdev; - - ath5k_debug_init_device(sc); - - /* - * Mark the device as detached to avoid processing - * interrupts until setup is complete. - */ - __set_bit(ATH_STAT_INVALID, sc->status); - - sc->iobase = mem; /* So we can unmap it on detach */ - sc->cachelsz = csz * sizeof(u32); /* convert to bytes */ - sc->opmode = NL80211_IFTYPE_STATION; - mutex_init(&sc->lock); - spin_lock_init(&sc->rxbuflock); - spin_lock_init(&sc->txbuflock); - spin_lock_init(&sc->block); - - /* Set private data */ - pci_set_drvdata(pdev, hw); - - /* Setup interrupt handler */ - ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc); - if (ret) { - ATH5K_ERR(sc, "request_irq failed\n"); - goto err_free; - } - - /* Initialize device */ - sc->ah = ath5k_hw_attach(sc, id->driver_data); - if (IS_ERR(sc->ah)) { - ret = PTR_ERR(sc->ah); - goto err_irq; - } - - /* set up multi-rate retry capabilities */ - if (sc->ah->ah_version == AR5K_AR5212) { - hw->max_rates = 4; - hw->max_rate_tries = 11; - } - - /* Finish private driver data initialization */ - ret = ath5k_attach(pdev, hw); - if (ret) - goto err_ah; - - ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n", - ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev), - sc->ah->ah_mac_srev, - sc->ah->ah_phy_revision); - - if (!sc->ah->ah_single_chip) { - /* Single chip radio (!RF5111) */ - if (sc->ah->ah_radio_5ghz_revision && - !sc->ah->ah_radio_2ghz_revision) { - /* No 5GHz support -> report 2GHz radio */ - if (!test_bit(AR5K_MODE_11A, - sc->ah->ah_capabilities.cap_mode)) { - ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - /* No 2GHz support (5110 and some - * 5Ghz only cards) -> report 5Ghz radio */ - } else if (!test_bit(AR5K_MODE_11B, - sc->ah->ah_capabilities.cap_mode)) { - ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - /* Multiband radio */ - } else { - ATH5K_INFO(sc, "RF%s multiband radio found" - " (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - } - } - /* Multi chip radio (RF5111 - RF2111) -> - * report both 2GHz/5GHz radios */ - else if (sc->ah->ah_radio_5ghz_revision && - sc->ah->ah_radio_2ghz_revision){ - ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_2ghz_revision), - sc->ah->ah_radio_2ghz_revision); - } - } - - - /* ready to process interrupts */ - __clear_bit(ATH_STAT_INVALID, sc->status); - - return 0; -err_ah: - ath5k_hw_detach(sc->ah); -err_irq: - free_irq(pdev->irq, sc); -err_free: - ieee80211_free_hw(hw); -err_map: - pci_iounmap(pdev, mem); -err_reg: - pci_release_region(pdev, 0); -err_dis: - pci_disable_device(pdev); -err: - return ret; -} - -static void __devexit -ath5k_pci_remove(struct pci_dev *pdev) -{ - struct ieee80211_hw *hw = pci_get_drvdata(pdev); - struct ath5k_softc *sc = hw->priv; - - ath5k_debug_finish_device(sc); - ath5k_detach(pdev, hw); - ath5k_hw_detach(sc->ah); - free_irq(pdev->irq, sc); - pci_iounmap(pdev, sc->iobase); - pci_release_region(pdev, 0); - pci_disable_device(pdev); - ieee80211_free_hw(hw); -} - -#ifdef CONFIG_PM -static int -ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct ieee80211_hw *hw = pci_get_drvdata(pdev); - struct ath5k_softc *sc = hw->priv; - - ath5k_led_off(sc); - - ath5k_stop_hw(sc, true); - - free_irq(pdev->irq, sc); - pci_save_state(pdev); - pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D3hot); - - return 0; -} - -static int -ath5k_pci_resume(struct pci_dev *pdev) -{ - struct ieee80211_hw *hw = pci_get_drvdata(pdev); - struct ath5k_softc *sc = hw->priv; - int err; - - pci_restore_state(pdev); - - err = pci_enable_device(pdev); - if (err) - return err; - - /* - * Suspend/Resume resets the PCI configuration space, so we have to - * re-disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state - */ - pci_write_config_byte(pdev, 0x41, 0); - - err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc); - if (err) { - ATH5K_ERR(sc, "request_irq failed\n"); - goto err_no_irq; - } - - err = ath5k_init(sc, true); - if (err) - goto err_irq; - ath5k_led_enable(sc); - - return 0; -err_irq: - free_irq(pdev->irq, sc); -err_no_irq: - pci_disable_device(pdev); - return err; -} -#endif /* CONFIG_PM */ - - -/***********************\ -* Driver Initialization * -\***********************/ - -static int -ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) -{ - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; - u8 mac[ETH_ALEN] = {}; - int ret; - - ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device); - - /* - * Check if the MAC has multi-rate retry support. - * We do this by trying to setup a fake extended - * descriptor. MAC's that don't have support will - * return false w/o doing anything. MAC's that do - * support it will return true w/o doing anything. - */ - ret = ah->ah_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0); - if (ret < 0) - goto err; - if (ret > 0) - __set_bit(ATH_STAT_MRRETRY, sc->status); - - /* - * Collect the channel list. The 802.11 layer - * is resposible for filtering this list based - * on settings like the phy mode and regulatory - * domain restrictions. - */ - ret = ath5k_setup_bands(hw); - if (ret) { - ATH5K_ERR(sc, "can't get channels\n"); - goto err; - } - - /* NB: setup here so ath5k_rate_update is happy */ - if (test_bit(AR5K_MODE_11A, ah->ah_modes)) - ath5k_setcurmode(sc, AR5K_MODE_11A); - else - ath5k_setcurmode(sc, AR5K_MODE_11B); - - /* - * Allocate tx+rx descriptors and populate the lists. - */ - ret = ath5k_desc_alloc(sc, pdev); - if (ret) { - ATH5K_ERR(sc, "can't allocate descriptors\n"); - goto err; - } - - /* - * Allocate hardware transmit queues: one queue for - * beacon frames and one data queue for each QoS - * priority. Note that hw functions handle reseting - * these queues at the needed time. - */ - ret = ath5k_beaconq_setup(ah); - if (ret < 0) { - ATH5K_ERR(sc, "can't setup a beacon xmit queue\n"); - goto err_desc; - } - sc->bhalq = ret; - - sc->txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK); - if (IS_ERR(sc->txq)) { - ATH5K_ERR(sc, "can't setup xmit queue\n"); - ret = PTR_ERR(sc->txq); - goto err_bhal; - } - - tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc); - tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc); - tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc); - setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc); - - ret = ath5k_eeprom_read_mac(ah, mac); - if (ret) { - ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", - sc->pdev->device); - goto err_queues; - } - - SET_IEEE80211_PERM_ADDR(hw, mac); - /* All MAC address bits matter for ACKs */ - memset(sc->bssidmask, 0xff, ETH_ALEN); - ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask); - - ret = ieee80211_register_hw(hw); - if (ret) { - ATH5K_ERR(sc, "can't register ieee80211 hw\n"); - goto err_queues; - } - - ath5k_init_leds(sc); - - return 0; -err_queues: - ath5k_txq_release(sc); -err_bhal: - ath5k_hw_release_tx_queue(ah, sc->bhalq); -err_desc: - ath5k_desc_free(sc, pdev); -err: - return ret; -} - -static void -ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw) -{ - struct ath5k_softc *sc = hw->priv; - - /* - * NB: the order of these is important: - * o call the 802.11 layer before detaching ath5k_hw to - * insure callbacks into the driver to delete global - * key cache entries can be handled - * o reclaim the tx queue data structures after calling - * the 802.11 layer as we'll get called back to reclaim - * node state and potentially want to use them - * o to cleanup the tx queues the hal is called, so detach - * it last - * XXX: ??? detach ath5k_hw ??? - * Other than that, it's straightforward... - */ - ieee80211_unregister_hw(hw); - ath5k_desc_free(sc, pdev); - ath5k_txq_release(sc); - ath5k_hw_release_tx_queue(sc->ah, sc->bhalq); - ath5k_unregister_leds(sc); - - /* - * NB: can't reclaim these until after ieee80211_ifdetach - * returns because we'll get called back to reclaim node - * state and potentially want to use them. - */ -} - - - - -/********************\ -* Channel/mode setup * -\********************/ - -/* - * Convert IEEE channel number to MHz frequency. - */ -static inline short -ath5k_ieee2mhz(short chan) -{ - if (chan <= 14 || chan >= 27) - return ieee80211chan2mhz(chan); - else - return 2212 + chan * 20; -} - -static unsigned int -ath5k_copy_channels(struct ath5k_hw *ah, - struct ieee80211_channel *channels, - unsigned int mode, - unsigned int max) -{ - unsigned int i, count, size, chfreq, freq, ch; - - if (!test_bit(mode, ah->ah_modes)) - return 0; - - switch (mode) { - case AR5K_MODE_11A: - case AR5K_MODE_11A_TURBO: - /* 1..220, but 2GHz frequencies are filtered by check_channel */ - size = 220 ; - chfreq = CHANNEL_5GHZ; - break; - case AR5K_MODE_11B: - case AR5K_MODE_11G: - case AR5K_MODE_11G_TURBO: - size = 26; - chfreq = CHANNEL_2GHZ; - break; - default: - ATH5K_WARN(ah->ah_sc, "bad mode, not copying channels\n"); - return 0; - } - - for (i = 0, count = 0; i < size && max > 0; i++) { - ch = i + 1 ; - freq = ath5k_ieee2mhz(ch); - - /* Check if channel is supported by the chipset */ - if (!ath5k_channel_ok(ah, freq, chfreq)) - continue; - - /* Write channel info and increment counter */ - channels[count].center_freq = freq; - channels[count].band = (chfreq == CHANNEL_2GHZ) ? - IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; - switch (mode) { - case AR5K_MODE_11A: - case AR5K_MODE_11G: - channels[count].hw_value = chfreq | CHANNEL_OFDM; - break; - case AR5K_MODE_11A_TURBO: - case AR5K_MODE_11G_TURBO: - channels[count].hw_value = chfreq | - CHANNEL_OFDM | CHANNEL_TURBO; - break; - case AR5K_MODE_11B: - channels[count].hw_value = CHANNEL_B; - } - - count++; - max--; - } - - return count; -} - -static void -ath5k_setup_rate_idx(struct ath5k_softc *sc, struct ieee80211_supported_band *b) -{ - u8 i; - - for (i = 0; i < AR5K_MAX_RATES; i++) - sc->rate_idx[b->band][i] = -1; - - for (i = 0; i < b->n_bitrates; i++) { - sc->rate_idx[b->band][b->bitrates[i].hw_value] = i; - if (b->bitrates[i].hw_value_short) - sc->rate_idx[b->band][b->bitrates[i].hw_value_short] = i; - } -} - -static int -ath5k_setup_bands(struct ieee80211_hw *hw) -{ - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; - struct ieee80211_supported_band *sband; - int max_c, count_c = 0; - int i; - - BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS); - max_c = ARRAY_SIZE(sc->channels); - - /* 2GHz band */ - sband = &sc->sbands[IEEE80211_BAND_2GHZ]; - sband->band = IEEE80211_BAND_2GHZ; - sband->bitrates = &sc->rates[IEEE80211_BAND_2GHZ][0]; - - if (test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) { - /* G mode */ - memcpy(sband->bitrates, &ath5k_rates[0], - sizeof(struct ieee80211_rate) * 12); - sband->n_bitrates = 12; - - sband->channels = sc->channels; - sband->n_channels = ath5k_copy_channels(ah, sband->channels, - AR5K_MODE_11G, max_c); - - hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband; - count_c = sband->n_channels; - max_c -= count_c; - } else if (test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) { - /* B mode */ - memcpy(sband->bitrates, &ath5k_rates[0], - sizeof(struct ieee80211_rate) * 4); - sband->n_bitrates = 4; - - /* 5211 only supports B rates and uses 4bit rate codes - * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B) - * fix them up here: - */ - if (ah->ah_version == AR5K_AR5211) { - for (i = 0; i < 4; i++) { - sband->bitrates[i].hw_value = - sband->bitrates[i].hw_value & 0xF; - sband->bitrates[i].hw_value_short = - sband->bitrates[i].hw_value_short & 0xF; - } - } - - sband->channels = sc->channels; - sband->n_channels = ath5k_copy_channels(ah, sband->channels, - AR5K_MODE_11B, max_c); - - hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband; - count_c = sband->n_channels; - max_c -= count_c; - } - ath5k_setup_rate_idx(sc, sband); - - /* 5GHz band, A mode */ - if (test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)) { - sband = &sc->sbands[IEEE80211_BAND_5GHZ]; - sband->band = IEEE80211_BAND_5GHZ; - sband->bitrates = &sc->rates[IEEE80211_BAND_5GHZ][0]; - - memcpy(sband->bitrates, &ath5k_rates[4], - sizeof(struct ieee80211_rate) * 8); - sband->n_bitrates = 8; - - sband->channels = &sc->channels[count_c]; - sband->n_channels = ath5k_copy_channels(ah, sband->channels, - AR5K_MODE_11A, max_c); - - hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband; - } - ath5k_setup_rate_idx(sc, sband); - - ath5k_debug_dump_bands(sc); - - return 0; -} - -/* - * Set/change channels. If the channel is really being changed, - * it's done by reseting the chip. To accomplish this we must - * first cleanup any pending DMA, then restart stuff after a la - * ath5k_init. - * - * Called with sc->lock. - */ -static int -ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) -{ - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "(%u MHz) -> (%u MHz)\n", - sc->curchan->center_freq, chan->center_freq); - - if (chan->center_freq != sc->curchan->center_freq || - chan->hw_value != sc->curchan->hw_value) { - - sc->curchan = chan; - sc->curband = &sc->sbands[chan->band]; - - /* - * To switch channels clear any pending DMA operations; - * wait long enough for the RX fifo to drain, reset the - * hardware at the new frequency, and then re-enable - * the relevant bits of the h/w. - */ - return ath5k_reset(sc, true, true); - } - - return 0; -} - -static void -ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode) -{ - sc->curmode = mode; - - if (mode == AR5K_MODE_11A) { - sc->curband = &sc->sbands[IEEE80211_BAND_5GHZ]; - } else { - sc->curband = &sc->sbands[IEEE80211_BAND_2GHZ]; - } -} - -static void -ath5k_mode_setup(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - u32 rfilt; - - /* configure rx filter */ - rfilt = sc->filter_flags; - ath5k_hw_set_rx_filter(ah, rfilt); - - if (ath5k_hw_hasbssidmask(ah)) - ath5k_hw_set_bssid_mask(ah, sc->bssidmask); - - /* configure operational mode */ - ath5k_hw_set_opmode(ah); - - ath5k_hw_set_mcast_filter(ah, 0, 0); - ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt); -} - -static inline int -ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix) -{ - WARN_ON(hw_rix < 0 || hw_rix > AR5K_MAX_RATES); - return sc->rate_idx[sc->curband->band][hw_rix]; -} - -/***************\ -* Buffers setup * -\***************/ - -static -struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr) -{ - struct sk_buff *skb; - unsigned int off; - - /* - * Allocate buffer with headroom_needed space for the - * fake physical layer header at the start. - */ - skb = dev_alloc_skb(sc->rxbufsize + sc->cachelsz - 1); - - if (!skb) { - ATH5K_ERR(sc, "can't alloc skbuff of size %u\n", - sc->rxbufsize + sc->cachelsz - 1); - return NULL; - } - /* - * Cache-line-align. This is important (for the - * 5210 at least) as not doing so causes bogus data - * in rx'd frames. - */ - off = ((unsigned long)skb->data) % sc->cachelsz; - if (off != 0) - skb_reserve(skb, sc->cachelsz - off); - - *skb_addr = pci_map_single(sc->pdev, - skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE); - if (unlikely(pci_dma_mapping_error(sc->pdev, *skb_addr))) { - ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__); - dev_kfree_skb(skb); - return NULL; - } - return skb; -} - -static int -ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) -{ - struct ath5k_hw *ah = sc->ah; - struct sk_buff *skb = bf->skb; - struct ath5k_desc *ds; - - if (!skb) { - skb = ath5k_rx_skb_alloc(sc, &bf->skbaddr); - if (!skb) - return -ENOMEM; - bf->skb = skb; - } - - /* - * Setup descriptors. For receive we always terminate - * the descriptor list with a self-linked entry so we'll - * not get overrun under high load (as can happen with a - * 5212 when ANI processing enables PHY error frames). - * - * To insure the last descriptor is self-linked we create - * each descriptor as self-linked and add it to the end. As - * each additional descriptor is added the previous self-linked - * entry is ``fixed'' naturally. This should be safe even - * if DMA is happening. When processing RX interrupts we - * never remove/process the last, self-linked, entry on the - * descriptor list. This insures the hardware always has - * someplace to write a new frame. - */ - ds = bf->desc; - ds->ds_link = bf->daddr; /* link to self */ - ds->ds_data = bf->skbaddr; - ah->ah_setup_rx_desc(ah, ds, - skb_tailroom(skb), /* buffer size */ - 0); - - if (sc->rxlink != NULL) - *sc->rxlink = bf->daddr; - sc->rxlink = &ds->ds_link; - return 0; -} - -static int -ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) -{ - struct ath5k_hw *ah = sc->ah; - struct ath5k_txq *txq = sc->txq; - struct ath5k_desc *ds = bf->desc; - struct sk_buff *skb = bf->skb; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID; - struct ieee80211_rate *rate; - unsigned int mrr_rate[3], mrr_tries[3]; - int i, ret; - - flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK; - - /* XXX endianness */ - bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len, - PCI_DMA_TODEVICE); - - if (info->flags & IEEE80211_TX_CTL_NO_ACK) - flags |= AR5K_TXDESC_NOACK; - - pktlen = skb->len; - - if (info->control.hw_key) { - keyidx = info->control.hw_key->hw_key_idx; - pktlen += info->control.hw_key->icv_len; - } - ret = ah->ah_setup_tx_desc(ah, ds, pktlen, - ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL, - (sc->power_level * 2), - ieee80211_get_tx_rate(sc->hw, info)->hw_value, - info->control.rates[0].count, keyidx, 0, flags, 0, 0); - if (ret) - goto err_unmap; - - memset(mrr_rate, 0, sizeof(mrr_rate)); - memset(mrr_tries, 0, sizeof(mrr_tries)); - for (i = 0; i < 3; i++) { - rate = ieee80211_get_alt_retry_rate(sc->hw, info, i); - if (!rate) - break; - - mrr_rate[i] = rate->hw_value; - mrr_tries[i] = info->control.rates[i + 1].count; - } - - ah->ah_setup_mrr_tx_desc(ah, ds, - mrr_rate[0], mrr_tries[0], - mrr_rate[1], mrr_tries[1], - mrr_rate[2], mrr_tries[2]); - - ds->ds_link = 0; - ds->ds_data = bf->skbaddr; - - spin_lock_bh(&txq->lock); - list_add_tail(&bf->list, &txq->q); - sc->tx_stats[txq->qnum].len++; - if (txq->link == NULL) /* is this first packet? */ - ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr); - else /* no, so only link it */ - *txq->link = bf->daddr; - - txq->link = &ds->ds_link; - ath5k_hw_start_tx_dma(ah, txq->qnum); - mmiowb(); - spin_unlock_bh(&txq->lock); - - return 0; -err_unmap: - pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE); - return ret; -} - -/*******************\ -* Descriptors setup * -\*******************/ - -static int -ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev) -{ - struct ath5k_desc *ds; - struct ath5k_buf *bf; - dma_addr_t da; - unsigned int i; - int ret; - - /* allocate descriptors */ - sc->desc_len = sizeof(struct ath5k_desc) * - (ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1); - sc->desc = pci_alloc_consistent(pdev, sc->desc_len, &sc->desc_daddr); - if (sc->desc == NULL) { - ATH5K_ERR(sc, "can't allocate descriptors\n"); - ret = -ENOMEM; - goto err; - } - ds = sc->desc; - da = sc->desc_daddr; - ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "DMA map: %p (%zu) -> %llx\n", - ds, sc->desc_len, (unsigned long long)sc->desc_daddr); - - bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF, - sizeof(struct ath5k_buf), GFP_KERNEL); - if (bf == NULL) { - ATH5K_ERR(sc, "can't allocate bufptr\n"); - ret = -ENOMEM; - goto err_free; - } - sc->bufptr = bf; - - INIT_LIST_HEAD(&sc->rxbuf); - for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) { - bf->desc = ds; - bf->daddr = da; - list_add_tail(&bf->list, &sc->rxbuf); - } - - INIT_LIST_HEAD(&sc->txbuf); - sc->txbuf_len = ATH_TXBUF; - for (i = 0; i < ATH_TXBUF; i++, bf++, ds++, - da += sizeof(*ds)) { - bf->desc = ds; - bf->daddr = da; - list_add_tail(&bf->list, &sc->txbuf); - } - - /* beacon buffer */ - bf->desc = ds; - bf->daddr = da; - sc->bbuf = bf; - - return 0; -err_free: - pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr); -err: - sc->desc = NULL; - return ret; -} - -static void -ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev) -{ - struct ath5k_buf *bf; - - ath5k_txbuf_free(sc, sc->bbuf); - list_for_each_entry(bf, &sc->txbuf, list) - ath5k_txbuf_free(sc, bf); - list_for_each_entry(bf, &sc->rxbuf, list) - ath5k_txbuf_free(sc, bf); - - /* Free memory associated with all descriptors */ - pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr); - - kfree(sc->bufptr); - sc->bufptr = NULL; -} - - - - - -/**************\ -* Queues setup * -\**************/ - -static struct ath5k_txq * -ath5k_txq_setup(struct ath5k_softc *sc, - int qtype, int subtype) -{ - struct ath5k_hw *ah = sc->ah; - struct ath5k_txq *txq; - struct ath5k_txq_info qi = { - .tqi_subtype = subtype, - .tqi_aifs = AR5K_TXQ_USEDEFAULT, - .tqi_cw_min = AR5K_TXQ_USEDEFAULT, - .tqi_cw_max = AR5K_TXQ_USEDEFAULT - }; - int qnum; - - /* - * Enable interrupts only for EOL and DESC conditions. - * We mark tx descriptors to receive a DESC interrupt - * when a tx queue gets deep; otherwise waiting for the - * EOL to reap descriptors. Note that this is done to - * reduce interrupt load and this only defers reaping - * descriptors, never transmitting frames. Aside from - * reducing interrupts this also permits more concurrency. - * The only potential downside is if the tx queue backs - * up in which case the top half of the kernel may backup - * due to a lack of tx descriptors. - */ - qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE | - AR5K_TXQ_FLAG_TXDESCINT_ENABLE; - qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi); - if (qnum < 0) { - /* - * NB: don't print a message, this happens - * normally on parts with too few tx queues - */ - return ERR_PTR(qnum); - } - if (qnum >= ARRAY_SIZE(sc->txqs)) { - ATH5K_ERR(sc, "hw qnum %u out of range, max %tu!\n", - qnum, ARRAY_SIZE(sc->txqs)); - ath5k_hw_release_tx_queue(ah, qnum); - return ERR_PTR(-EINVAL); - } - txq = &sc->txqs[qnum]; - if (!txq->setup) { - txq->qnum = qnum; - txq->link = NULL; - INIT_LIST_HEAD(&txq->q); - spin_lock_init(&txq->lock); - txq->setup = true; - } - return &sc->txqs[qnum]; -} - -static int -ath5k_beaconq_setup(struct ath5k_hw *ah) -{ - struct ath5k_txq_info qi = { - .tqi_aifs = AR5K_TXQ_USEDEFAULT, - .tqi_cw_min = AR5K_TXQ_USEDEFAULT, - .tqi_cw_max = AR5K_TXQ_USEDEFAULT, - /* NB: for dynamic turbo, don't enable any other interrupts */ - .tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE - }; - - return ath5k_hw_setup_tx_queue(ah, AR5K_TX_QUEUE_BEACON, &qi); -} - -static int -ath5k_beaconq_config(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - struct ath5k_txq_info qi; - int ret; - - ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi); - if (ret) - return ret; - if (sc->opmode == NL80211_IFTYPE_AP || - sc->opmode == NL80211_IFTYPE_MESH_POINT) { - /* - * Always burst out beacon and CAB traffic - * (aifs = cwmin = cwmax = 0) - */ - qi.tqi_aifs = 0; - qi.tqi_cw_min = 0; - qi.tqi_cw_max = 0; - } else if (sc->opmode == NL80211_IFTYPE_ADHOC) { - /* - * Adhoc mode; backoff between 0 and (2 * cw_min). - */ - qi.tqi_aifs = 0; - qi.tqi_cw_min = 0; - qi.tqi_cw_max = 2 * ah->ah_cw_min; - } - - ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, - "beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n", - qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max); - - ret = ath5k_hw_set_tx_queueprops(ah, sc->bhalq, &qi); - if (ret) { - ATH5K_ERR(sc, "%s: unable to update parameters for beacon " - "hardware queue!\n", __func__); - return ret; - } - - return ath5k_hw_reset_tx_queue(ah, sc->bhalq); /* push to h/w */; -} - -static void -ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq) -{ - struct ath5k_buf *bf, *bf0; - - /* - * NB: this assumes output has been stopped and - * we do not need to block ath5k_tx_tasklet - */ - spin_lock_bh(&txq->lock); - list_for_each_entry_safe(bf, bf0, &txq->q, list) { - ath5k_debug_printtxbuf(sc, bf); - - ath5k_txbuf_free(sc, bf); - - spin_lock_bh(&sc->txbuflock); - sc->tx_stats[txq->qnum].len--; - list_move_tail(&bf->list, &sc->txbuf); - sc->txbuf_len++; - spin_unlock_bh(&sc->txbuflock); - } - txq->link = NULL; - spin_unlock_bh(&txq->lock); -} - -/* - * Drain the transmit queues and reclaim resources. - */ -static void -ath5k_txq_cleanup(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - unsigned int i; - - /* XXX return value */ - if (likely(!test_bit(ATH_STAT_INVALID, sc->status))) { - /* don't touch the hardware if marked invalid */ - ath5k_hw_stop_tx_dma(ah, sc->bhalq); - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n", - ath5k_hw_get_txdp(ah, sc->bhalq)); - for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) - if (sc->txqs[i].setup) { - ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum); - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, " - "link %p\n", - sc->txqs[i].qnum, - ath5k_hw_get_txdp(ah, - sc->txqs[i].qnum), - sc->txqs[i].link); - } - } - ieee80211_wake_queues(sc->hw); /* XXX move to callers */ - - for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) - if (sc->txqs[i].setup) - ath5k_txq_drainq(sc, &sc->txqs[i]); -} - -static void -ath5k_txq_release(struct ath5k_softc *sc) -{ - struct ath5k_txq *txq = sc->txqs; - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(sc->txqs); i++, txq++) - if (txq->setup) { - ath5k_hw_release_tx_queue(sc->ah, txq->qnum); - txq->setup = false; - } -} - - - - -/*************\ -* RX Handling * -\*************/ - -/* - * Enable the receive h/w following a reset. - */ -static int -ath5k_rx_start(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - struct ath5k_buf *bf; - int ret; - - sc->rxbufsize = roundup(IEEE80211_MAX_LEN, sc->cachelsz); - - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rxbufsize %u\n", - sc->cachelsz, sc->rxbufsize); - - sc->rxlink = NULL; - - spin_lock_bh(&sc->rxbuflock); - list_for_each_entry(bf, &sc->rxbuf, list) { - ret = ath5k_rxbuf_setup(sc, bf); - if (ret != 0) { - spin_unlock_bh(&sc->rxbuflock); - goto err; - } - } - bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list); - spin_unlock_bh(&sc->rxbuflock); - - ath5k_hw_set_rxdp(ah, bf->daddr); - ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */ - ath5k_mode_setup(sc); /* set filters, etc. */ - ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */ - - return 0; -err: - return ret; -} - -/* - * Disable the receive h/w in preparation for a reset. - */ -static void -ath5k_rx_stop(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - - ath5k_hw_stop_rx_pcu(ah); /* disable PCU */ - ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */ - ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */ - - ath5k_debug_printrxbuffs(sc, ah); - - sc->rxlink = NULL; /* just in case */ -} - -static unsigned int -ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds, - struct sk_buff *skb, struct ath5k_rx_status *rs) -{ - struct ieee80211_hdr *hdr = (void *)skb->data; - unsigned int keyix, hlen; - - if (!(rs->rs_status & AR5K_RXERR_DECRYPT) && - rs->rs_keyix != AR5K_RXKEYIX_INVALID) - return RX_FLAG_DECRYPTED; - - /* Apparently when a default key is used to decrypt the packet - the hw does not set the index used to decrypt. In such cases - get the index from the packet. */ - hlen = ieee80211_hdrlen(hdr->frame_control); - if (ieee80211_has_protected(hdr->frame_control) && - !(rs->rs_status & AR5K_RXERR_DECRYPT) && - skb->len >= hlen + 4) { - keyix = skb->data[hlen + 3] >> 6; - - if (test_bit(keyix, sc->keymap)) - return RX_FLAG_DECRYPTED; - } - - return 0; -} - - -static void -ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb, - struct ieee80211_rx_status *rxs) -{ - u64 tsf, bc_tstamp; - u32 hw_tu; - struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data; - - if (ieee80211_is_beacon(mgmt->frame_control) && - le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS && - memcmp(mgmt->bssid, sc->ah->ah_bssid, ETH_ALEN) == 0) { - /* - * Received an IBSS beacon with the same BSSID. Hardware *must* - * have updated the local TSF. We have to work around various - * hardware bugs, though... - */ - tsf = ath5k_hw_get_tsf64(sc->ah); - bc_tstamp = le64_to_cpu(mgmt->u.beacon.timestamp); - hw_tu = TSF_TO_TU(tsf); - - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, - "beacon %llx mactime %llx (diff %lld) tsf now %llx\n", - (unsigned long long)bc_tstamp, - (unsigned long long)rxs->mactime, - (unsigned long long)(rxs->mactime - bc_tstamp), - (unsigned long long)tsf); - - /* - * Sometimes the HW will give us a wrong tstamp in the rx - * status, causing the timestamp extension to go wrong. - * (This seems to happen especially with beacon frames bigger - * than 78 byte (incl. FCS)) - * But we know that the receive timestamp must be later than the - * timestamp of the beacon since HW must have synced to that. - * - * NOTE: here we assume mactime to be after the frame was - * received, not like mac80211 which defines it at the start. - */ - if (bc_tstamp > rxs->mactime) { - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, - "fixing mactime from %llx to %llx\n", - (unsigned long long)rxs->mactime, - (unsigned long long)tsf); - rxs->mactime = tsf; - } - - /* - * Local TSF might have moved higher than our beacon timers, - * in that case we have to update them to continue sending - * beacons. This also takes care of synchronizing beacon sending - * times with other stations. - */ - if (hw_tu >= sc->nexttbtt) - ath5k_beacon_update_timers(sc, bc_tstamp); - } -} - - -static void -ath5k_tasklet_rx(unsigned long data) -{ - struct ieee80211_rx_status rxs = {}; - struct ath5k_rx_status rs = {}; - struct sk_buff *skb, *next_skb; - dma_addr_t next_skb_addr; - struct ath5k_softc *sc = (void *)data; - struct ath5k_buf *bf, *bf_last; - struct ath5k_desc *ds; - int ret; - int hdrlen; - int padsize; - - spin_lock(&sc->rxbuflock); - if (list_empty(&sc->rxbuf)) { - ATH5K_WARN(sc, "empty rx buf pool\n"); - goto unlock; - } - bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list); - do { - rxs.flag = 0; - - bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list); - BUG_ON(bf->skb == NULL); - skb = bf->skb; - ds = bf->desc; - - /* - * last buffer must not be freed to ensure proper hardware - * function. When the hardware finishes also a packet next to - * it, we are sure, it doesn't use it anymore and we can go on. - */ - if (bf_last == bf) - bf->flags |= 1; - if (bf->flags) { - struct ath5k_buf *bf_next = list_entry(bf->list.next, - struct ath5k_buf, list); - ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc, - &rs); - if (ret) - break; - bf->flags &= ~1; - /* skip the overwritten one (even status is martian) */ - goto next; - } - - ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs); - if (unlikely(ret == -EINPROGRESS)) - break; - else if (unlikely(ret)) { - ATH5K_ERR(sc, "error in processing rx descriptor\n"); - spin_unlock(&sc->rxbuflock); - return; - } - - if (unlikely(rs.rs_more)) { - ATH5K_WARN(sc, "unsupported jumbo\n"); - goto next; - } - - if (unlikely(rs.rs_status)) { - if (rs.rs_status & AR5K_RXERR_PHY) - goto next; - if (rs.rs_status & AR5K_RXERR_DECRYPT) { - /* - * Decrypt error. If the error occurred - * because there was no hardware key, then - * let the frame through so the upper layers - * can process it. This is necessary for 5210 - * parts which have no way to setup a ``clear'' - * key cache entry. - * - * XXX do key cache faulting - */ - if (rs.rs_keyix == AR5K_RXKEYIX_INVALID && - !(rs.rs_status & AR5K_RXERR_CRC)) - goto accept; - } - if (rs.rs_status & AR5K_RXERR_MIC) { - rxs.flag |= RX_FLAG_MMIC_ERROR; - goto accept; - } - - /* let crypto-error packets fall through in MNTR */ - if ((rs.rs_status & - ~(AR5K_RXERR_DECRYPT|AR5K_RXERR_MIC)) || - sc->opmode != NL80211_IFTYPE_MONITOR) - goto next; - } -accept: - next_skb = ath5k_rx_skb_alloc(sc, &next_skb_addr); - - /* - * If we can't replace bf->skb with a new skb under memory - * pressure, just skip this packet - */ - if (!next_skb) - goto next; - - pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize, - PCI_DMA_FROMDEVICE); - skb_put(skb, rs.rs_datalen); - - /* The MAC header is padded to have 32-bit boundary if the - * packet payload is non-zero. The general calculation for - * padsize would take into account odd header lengths: - * padsize = (4 - hdrlen % 4) % 4; However, since only - * even-length headers are used, padding can only be 0 or 2 - * bytes and we can optimize this a bit. In addition, we must - * not try to remove padding from short control frames that do - * not have payload. */ - hdrlen = ieee80211_get_hdrlen_from_skb(skb); - padsize = ath5k_pad_size(hdrlen); - if (padsize) { - memmove(skb->data + padsize, skb->data, hdrlen); - skb_pull(skb, padsize); - } - - /* - * always extend the mac timestamp, since this information is - * also needed for proper IBSS merging. - * - * XXX: it might be too late to do it here, since rs_tstamp is - * 15bit only. that means TSF extension has to be done within - * 32768usec (about 32ms). it might be necessary to move this to - * the interrupt handler, like it is done in madwifi. - * - * Unfortunately we don't know when the hardware takes the rx - * timestamp (beginning of phy frame, data frame, end of rx?). - * The only thing we know is that it is hardware specific... - * On AR5213 it seems the rx timestamp is at the end of the - * frame, but i'm not sure. - * - * NOTE: mac80211 defines mactime at the beginning of the first - * data symbol. Since we don't have any time references it's - * impossible to comply to that. This affects IBSS merge only - * right now, so it's not too bad... - */ - rxs.mactime = ath5k_extend_tsf(sc->ah, rs.rs_tstamp); - rxs.flag |= RX_FLAG_TSFT; - - rxs.freq = sc->curchan->center_freq; - rxs.band = sc->curband->band; - - rxs.noise = sc->ah->ah_noise_floor; - rxs.signal = rxs.noise + rs.rs_rssi; - - /* An rssi of 35 indicates you should be able use - * 54 Mbps reliably. A more elaborate scheme can be used - * here but it requires a map of SNR/throughput for each - * possible mode used */ - rxs.qual = rs.rs_rssi * 100 / 35; - - /* rssi can be more than 35 though, anything above that - * should be considered at 100% */ - if (rxs.qual > 100) - rxs.qual = 100; - - rxs.antenna = rs.rs_antenna; - rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate); - rxs.flag |= ath5k_rx_decrypted(sc, ds, skb, &rs); - - if (rxs.rate_idx >= 0 && rs.rs_rate == - sc->curband->bitrates[rxs.rate_idx].hw_value_short) - rxs.flag |= RX_FLAG_SHORTPRE; - - ath5k_debug_dump_skb(sc, skb, "RX ", 0); - - /* check beacons in IBSS mode */ - if (sc->opmode == NL80211_IFTYPE_ADHOC) - ath5k_check_ibss_tsf(sc, skb, &rxs); - - __ieee80211_rx(sc->hw, skb, &rxs); - - bf->skb = next_skb; - bf->skbaddr = next_skb_addr; -next: - list_move_tail(&bf->list, &sc->rxbuf); - } while (ath5k_rxbuf_setup(sc, bf) == 0); -unlock: - spin_unlock(&sc->rxbuflock); -} - - - - -/*************\ -* TX Handling * -\*************/ - -static void -ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) -{ - struct ath5k_tx_status ts = {}; - struct ath5k_buf *bf, *bf0; - struct ath5k_desc *ds; - struct sk_buff *skb; - struct ieee80211_tx_info *info; - int i, ret; - - spin_lock(&txq->lock); - list_for_each_entry_safe(bf, bf0, &txq->q, list) { - ds = bf->desc; - - ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts); - if (unlikely(ret == -EINPROGRESS)) - break; - else if (unlikely(ret)) { - ATH5K_ERR(sc, "error %d while processing queue %u\n", - ret, txq->qnum); - break; - } - - skb = bf->skb; - info = IEEE80211_SKB_CB(skb); - bf->skb = NULL; - - pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, - PCI_DMA_TODEVICE); - - ieee80211_tx_info_clear_status(info); - for (i = 0; i < 4; i++) { - struct ieee80211_tx_rate *r = - &info->status.rates[i]; - - if (ts.ts_rate[i]) { - r->idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]); - r->count = ts.ts_retry[i]; - } else { - r->idx = -1; - r->count = 0; - } - } - - /* count the successful attempt as well */ - info->status.rates[ts.ts_final_idx].count++; - - if (unlikely(ts.ts_status)) { - sc->ll_stats.dot11ACKFailureCount++; - if (ts.ts_status & AR5K_TXERR_FILT) - info->flags |= IEEE80211_TX_STAT_TX_FILTERED; - } else { - info->flags |= IEEE80211_TX_STAT_ACK; - info->status.ack_signal = ts.ts_rssi; - } - - ieee80211_tx_status(sc->hw, skb); - sc->tx_stats[txq->qnum].count++; - - spin_lock(&sc->txbuflock); - sc->tx_stats[txq->qnum].len--; - list_move_tail(&bf->list, &sc->txbuf); - sc->txbuf_len++; - spin_unlock(&sc->txbuflock); - } - if (likely(list_empty(&txq->q))) - txq->link = NULL; - spin_unlock(&txq->lock); - if (sc->txbuf_len > ATH_TXBUF / 5) - ieee80211_wake_queues(sc->hw); -} - -static void -ath5k_tasklet_tx(unsigned long data) -{ - struct ath5k_softc *sc = (void *)data; - - ath5k_tx_processq(sc, sc->txq); -} - - -/*****************\ -* Beacon handling * -\*****************/ - -/* - * Setup the beacon frame for transmit. - */ -static int -ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) -{ - struct sk_buff *skb = bf->skb; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ath5k_hw *ah = sc->ah; - struct ath5k_desc *ds; - int ret, antenna = 0; - u32 flags; - - bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len, - PCI_DMA_TODEVICE); - ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] " - "skbaddr %llx\n", skb, skb->data, skb->len, - (unsigned long long)bf->skbaddr); - if (pci_dma_mapping_error(sc->pdev, bf->skbaddr)) { - ATH5K_ERR(sc, "beacon DMA mapping failed\n"); - return -EIO; - } - - ds = bf->desc; - - flags = AR5K_TXDESC_NOACK; - if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) { - ds->ds_link = bf->daddr; /* self-linked */ - flags |= AR5K_TXDESC_VEOL; - /* - * Let hardware handle antenna switching if txantenna is not set - */ - } else { - ds->ds_link = 0; - /* - * Switch antenna every 4 beacons if txantenna is not set - * XXX assumes two antennas - */ - if (antenna == 0) - antenna = sc->bsent & 4 ? 2 : 1; - } - - ds->ds_data = bf->skbaddr; - ret = ah->ah_setup_tx_desc(ah, ds, skb->len, - ieee80211_get_hdrlen_from_skb(skb), - AR5K_PKT_TYPE_BEACON, (sc->power_level * 2), - ieee80211_get_tx_rate(sc->hw, info)->hw_value, - 1, AR5K_TXKEYIX_INVALID, - antenna, flags, 0, 0); - if (ret) - goto err_unmap; - - return 0; -err_unmap: - pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE); - return ret; -} - -/* - * Transmit a beacon frame at SWBA. Dynamic updates to the - * frame contents are done as needed and the slot time is - * also adjusted based on current state. - * - * this is usually called from interrupt context (ath5k_intr()) - * but also from ath5k_beacon_config() in IBSS mode which in turn - * can be called from a tasklet and user context - */ -static void -ath5k_beacon_send(struct ath5k_softc *sc) -{ - struct ath5k_buf *bf = sc->bbuf; - struct ath5k_hw *ah = sc->ah; - - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n"); - - if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION || - sc->opmode == NL80211_IFTYPE_MONITOR)) { - ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL); - return; - } - /* - * Check if the previous beacon has gone out. If - * not don't don't try to post another, skip this - * period and wait for the next. Missed beacons - * indicate a problem and should not occur. If we - * miss too many consecutive beacons reset the device. - */ - if (unlikely(ath5k_hw_num_tx_pending(ah, sc->bhalq) != 0)) { - sc->bmisscount++; - ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, - "missed %u consecutive beacons\n", sc->bmisscount); - if (sc->bmisscount > 3) { /* NB: 3 is a guess */ - ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, - "stuck beacon time (%u missed)\n", - sc->bmisscount); - tasklet_schedule(&sc->restq); - } - return; - } - if (unlikely(sc->bmisscount != 0)) { - ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, - "resume beacon xmit after %u misses\n", - sc->bmisscount); - sc->bmisscount = 0; - } - - /* - * Stop any current dma and put the new frame on the queue. - * This should never fail since we check above that no frames - * are still pending on the queue. - */ - if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) { - ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq); - /* NB: hw still stops DMA, so proceed */ - } - - ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr); - ath5k_hw_start_tx_dma(ah, sc->bhalq); - ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n", - sc->bhalq, (unsigned long long)bf->daddr, bf->desc); - - sc->bsent++; -} - - -/** - * ath5k_beacon_update_timers - update beacon timers - * - * @sc: struct ath5k_softc pointer we are operating on - * @bc_tsf: the timestamp of the beacon. 0 to reset the TSF. -1 to perform a - * beacon timer update based on the current HW TSF. - * - * Calculate the next target beacon transmit time (TBTT) based on the timestamp - * of a received beacon or the current local hardware TSF and write it to the - * beacon timer registers. - * - * This is called in a variety of situations, e.g. when a beacon is received, - * when a TSF update has been detected, but also when an new IBSS is created or - * when we otherwise know we have to update the timers, but we keep it in this - * function to have it all together in one place. - */ -static void -ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf) -{ - struct ath5k_hw *ah = sc->ah; - u32 nexttbtt, intval, hw_tu, bc_tu; - u64 hw_tsf; - - intval = sc->bintval & AR5K_BEACON_PERIOD; - if (WARN_ON(!intval)) - return; - - /* beacon TSF converted to TU */ - bc_tu = TSF_TO_TU(bc_tsf); - - /* current TSF converted to TU */ - hw_tsf = ath5k_hw_get_tsf64(ah); - hw_tu = TSF_TO_TU(hw_tsf); - -#define FUDGE 3 - /* we use FUDGE to make sure the next TBTT is ahead of the current TU */ - if (bc_tsf == -1) { - /* - * no beacons received, called internally. - * just need to refresh timers based on HW TSF. - */ - nexttbtt = roundup(hw_tu + FUDGE, intval); - } else if (bc_tsf == 0) { - /* - * no beacon received, probably called by ath5k_reset_tsf(). - * reset TSF to start with 0. - */ - nexttbtt = intval; - intval |= AR5K_BEACON_RESET_TSF; - } else if (bc_tsf > hw_tsf) { - /* - * beacon received, SW merge happend but HW TSF not yet updated. - * not possible to reconfigure timers yet, but next time we - * receive a beacon with the same BSSID, the hardware will - * automatically update the TSF and then we need to reconfigure - * the timers. - */ - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, - "need to wait for HW TSF sync\n"); - return; - } else { - /* - * most important case for beacon synchronization between STA. - * - * beacon received and HW TSF has been already updated by HW. - * update next TBTT based on the TSF of the beacon, but make - * sure it is ahead of our local TSF timer. - */ - nexttbtt = bc_tu + roundup(hw_tu + FUDGE - bc_tu, intval); - } -#undef FUDGE - - sc->nexttbtt = nexttbtt; - - intval |= AR5K_BEACON_ENA; - ath5k_hw_init_beacon(ah, nexttbtt, intval); - - /* - * debugging output last in order to preserve the time critical aspect - * of this function - */ - if (bc_tsf == -1) - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, - "reconfigured timers based on HW TSF\n"); - else if (bc_tsf == 0) - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, - "reset HW TSF and timers\n"); - else - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, - "updated timers based on beacon TSF\n"); - - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, - "bc_tsf %llx hw_tsf %llx bc_tu %u hw_tu %u nexttbtt %u\n", - (unsigned long long) bc_tsf, - (unsigned long long) hw_tsf, bc_tu, hw_tu, nexttbtt); - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "intval %u %s %s\n", - intval & AR5K_BEACON_PERIOD, - intval & AR5K_BEACON_ENA ? "AR5K_BEACON_ENA" : "", - intval & AR5K_BEACON_RESET_TSF ? "AR5K_BEACON_RESET_TSF" : ""); -} - - -/** - * ath5k_beacon_config - Configure the beacon queues and interrupts - * - * @sc: struct ath5k_softc pointer we are operating on - * - * When operating in station mode we want to receive a BMISS interrupt when we - * stop seeing beacons from the AP we've associated with so we can look for - * another AP to associate with. - * - * In IBSS mode we use a self-linked tx descriptor if possible. We enable SWBA - * interrupts to detect TSF updates only. - */ -static void -ath5k_beacon_config(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - - ath5k_hw_set_imr(ah, 0); - sc->bmisscount = 0; - sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA); - - if (sc->opmode == NL80211_IFTYPE_STATION) { - sc->imask |= AR5K_INT_BMISS; - } else if (sc->opmode == NL80211_IFTYPE_ADHOC || - sc->opmode == NL80211_IFTYPE_MESH_POINT || - sc->opmode == NL80211_IFTYPE_AP) { - /* - * In IBSS mode we use a self-linked tx descriptor and let the - * hardware send the beacons automatically. We have to load it - * only once here. - * We use the SWBA interrupt only to keep track of the beacon - * timers in order to detect automatic TSF updates. - */ - ath5k_beaconq_config(sc); - - sc->imask |= AR5K_INT_SWBA; - - if (sc->opmode == NL80211_IFTYPE_ADHOC) { - if (ath5k_hw_hasveol(ah)) { - spin_lock(&sc->block); - ath5k_beacon_send(sc); - spin_unlock(&sc->block); - } - } else - ath5k_beacon_update_timers(sc, -1); - } - - ath5k_hw_set_imr(ah, sc->imask); -} - - -/********************\ -* Interrupt handling * -\********************/ - -static int -ath5k_init(struct ath5k_softc *sc, bool is_resume) -{ - struct ath5k_hw *ah = sc->ah; - int ret, i; - - mutex_lock(&sc->lock); - - if (is_resume && !test_bit(ATH_STAT_STARTED, sc->status)) - goto out_ok; - - __clear_bit(ATH_STAT_STARTED, sc->status); - - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode); - - /* - * Stop anything previously setup. This is safe - * no matter this is the first time through or not. - */ - ath5k_stop_locked(sc); - - /* - * The basic interface to setting the hardware in a good - * state is ``reset''. On return the hardware is known to - * be powered up and with interrupts disabled. This must - * be followed by initialization of the appropriate bits - * and then setup of the interrupt mask. - */ - sc->curchan = sc->hw->conf.channel; - sc->curband = &sc->sbands[sc->curchan->band]; - sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL | - AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL | - AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB; - ret = ath5k_reset(sc, false, false); - if (ret) - goto done; - - /* - * Reset the key cache since some parts do not reset the - * contents on initial power up or resume from suspend. - */ - for (i = 0; i < AR5K_KEYTABLE_SIZE; i++) - ath5k_hw_reset_key(ah, i); - - __set_bit(ATH_STAT_STARTED, sc->status); - - /* Set ack to be sent at low bit-rates */ - ath5k_hw_set_ack_bitrate_high(ah, false); - - mod_timer(&sc->calib_tim, round_jiffies(jiffies + - msecs_to_jiffies(ath5k_calinterval * 1000))); - -out_ok: - ret = 0; -done: - mmiowb(); - mutex_unlock(&sc->lock); - return ret; -} - -static int -ath5k_stop_locked(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n", - test_bit(ATH_STAT_INVALID, sc->status)); - - /* - * Shutdown the hardware and driver: - * stop output from above - * disable interrupts - * turn off timers - * turn off the radio - * clear transmit machinery - * clear receive machinery - * drain and release tx queues - * reclaim beacon resources - * power down hardware - * - * Note that some of this work is not possible if the - * hardware is gone (invalid). - */ - ieee80211_stop_queues(sc->hw); - - if (!test_bit(ATH_STAT_INVALID, sc->status)) { - ath5k_led_off(sc); - ath5k_hw_set_imr(ah, 0); - synchronize_irq(sc->pdev->irq); - } - ath5k_txq_cleanup(sc); - if (!test_bit(ATH_STAT_INVALID, sc->status)) { - ath5k_rx_stop(sc); - ath5k_hw_phy_disable(ah); - } else - sc->rxlink = NULL; - - return 0; -} - -/* - * Stop the device, grabbing the top-level lock to protect - * against concurrent entry through ath5k_init (which can happen - * if another thread does a system call and the thread doing the - * stop is preempted). - */ -static int -ath5k_stop_hw(struct ath5k_softc *sc, bool is_suspend) -{ - int ret; - - mutex_lock(&sc->lock); - ret = ath5k_stop_locked(sc); - if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) { - /* - * Set the chip in full sleep mode. Note that we are - * careful to do this only when bringing the interface - * completely to a stop. When the chip is in this state - * it must be carefully woken up or references to - * registers in the PCI clock domain may freeze the bus - * (and system). This varies by chip and is mostly an - * issue with newer parts that go to sleep more quickly. - */ - if (sc->ah->ah_mac_srev >= 0x78) { - /* - * XXX - * don't put newer MAC revisions > 7.8 to sleep because - * of the above mentioned problems - */ - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mac version > 7.8, " - "not putting device to sleep\n"); - } else { - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, - "putting device to full sleep\n"); - ath5k_hw_set_power(sc->ah, AR5K_PM_FULL_SLEEP, true, 0); - } - } - ath5k_txbuf_free(sc, sc->bbuf); - if (!is_suspend) - __clear_bit(ATH_STAT_STARTED, sc->status); - - mmiowb(); - mutex_unlock(&sc->lock); - - del_timer_sync(&sc->calib_tim); - tasklet_kill(&sc->rxtq); - tasklet_kill(&sc->txtq); - tasklet_kill(&sc->restq); - - return ret; -} - -static irqreturn_t -ath5k_intr(int irq, void *dev_id) -{ - struct ath5k_softc *sc = dev_id; - struct ath5k_hw *ah = sc->ah; - enum ath5k_int status; - unsigned int counter = 1000; - - if (unlikely(test_bit(ATH_STAT_INVALID, sc->status) || - !ath5k_hw_is_intr_pending(ah))) - return IRQ_NONE; - - do { - /* - * Figure out the reason(s) for the interrupt. Note - * that get_isr returns a pseudo-ISR that may include - * bits we haven't explicitly enabled so we mask the - * value to insure we only process bits we requested. - */ - ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */ - ATH5K_DBG(sc, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n", - status, sc->imask); - status &= sc->imask; /* discard unasked for bits */ - if (unlikely(status & AR5K_INT_FATAL)) { - /* - * Fatal errors are unrecoverable. - * Typically these are caused by DMA errors. - */ - tasklet_schedule(&sc->restq); - } else if (unlikely(status & AR5K_INT_RXORN)) { - tasklet_schedule(&sc->restq); - } else { - if (status & AR5K_INT_SWBA) { - /* - * Software beacon alert--time to send a beacon. - * Handle beacon transmission directly; deferring - * this is too slow to meet timing constraints - * under load. - * - * In IBSS mode we use this interrupt just to - * keep track of the next TBTT (target beacon - * transmission time) in order to detect wether - * automatic TSF updates happened. - */ - if (sc->opmode == NL80211_IFTYPE_ADHOC) { - /* XXX: only if VEOL suppported */ - u64 tsf = ath5k_hw_get_tsf64(ah); - sc->nexttbtt += sc->bintval; - ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, - "SWBA nexttbtt: %x hw_tu: %x " - "TSF: %llx\n", - sc->nexttbtt, - TSF_TO_TU(tsf), - (unsigned long long) tsf); - } else { - spin_lock(&sc->block); - ath5k_beacon_send(sc); - spin_unlock(&sc->block); - } - } - if (status & AR5K_INT_RXEOL) { - /* - * NB: the hardware should re-read the link when - * RXE bit is written, but it doesn't work at - * least on older hardware revs. - */ - sc->rxlink = NULL; - } - if (status & AR5K_INT_TXURN) { - /* bump tx trigger level */ - ath5k_hw_update_tx_triglevel(ah, true); - } - if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR)) - tasklet_schedule(&sc->rxtq); - if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC - | AR5K_INT_TXERR | AR5K_INT_TXEOL)) - tasklet_schedule(&sc->txtq); - if (status & AR5K_INT_BMISS) { - } - if (status & AR5K_INT_MIB) { - /* - * These stats are also used for ANI i think - * so how about updating them more often ? - */ - ath5k_hw_update_mib_counters(ah, &sc->ll_stats); - } - } - } while (ath5k_hw_is_intr_pending(ah) && counter-- > 0); - - if (unlikely(!counter)) - ATH5K_WARN(sc, "too many interrupts, giving up for now\n"); - - return IRQ_HANDLED; -} - -static void -ath5k_tasklet_reset(unsigned long data) -{ - struct ath5k_softc *sc = (void *)data; - - ath5k_reset_wake(sc); -} - -/* - * Periodically recalibrate the PHY to account - * for temperature/environment changes. - */ -static void -ath5k_calibrate(unsigned long data) -{ - struct ath5k_softc *sc = (void *)data; - struct ath5k_hw *ah = sc->ah; - - ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n", - ieee80211_frequency_to_channel(sc->curchan->center_freq), - sc->curchan->hw_value); - - if (ath5k_hw_get_rf_gain(ah) == AR5K_RFGAIN_NEED_CHANGE) { - /* - * Rfgain is out of bounds, reset the chip - * to load new gain values. - */ - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n"); - ath5k_reset_wake(sc); - } - if (ath5k_hw_phy_calibrate(ah, sc->curchan)) - ATH5K_ERR(sc, "calibration of channel %u failed\n", - ieee80211_frequency_to_channel( - sc->curchan->center_freq)); - - mod_timer(&sc->calib_tim, round_jiffies(jiffies + - msecs_to_jiffies(ath5k_calinterval * 1000))); -} - - - -/***************\ -* LED functions * -\***************/ - -static void -ath5k_led_enable(struct ath5k_softc *sc) -{ - if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { - ath5k_hw_set_gpio_output(sc->ah, sc->led_pin); - ath5k_led_off(sc); - } -} - -static void -ath5k_led_on(struct ath5k_softc *sc) -{ - if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) - return; - ath5k_hw_set_gpio(sc->ah, sc->led_pin, sc->led_on); -} - -static void -ath5k_led_off(struct ath5k_softc *sc) -{ - if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) - return; - ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on); -} - -static void -ath5k_led_brightness_set(struct led_classdev *led_dev, - enum led_brightness brightness) -{ - struct ath5k_led *led = container_of(led_dev, struct ath5k_led, - led_dev); - - if (brightness == LED_OFF) - ath5k_led_off(led->sc); - else - ath5k_led_on(led->sc); -} - -static int -ath5k_register_led(struct ath5k_softc *sc, struct ath5k_led *led, - const char *name, char *trigger) -{ - int err; - - led->sc = sc; - strncpy(led->name, name, sizeof(led->name)); - led->led_dev.name = led->name; - led->led_dev.default_trigger = trigger; - led->led_dev.brightness_set = ath5k_led_brightness_set; - - err = led_classdev_register(&sc->pdev->dev, &led->led_dev); - if (err) { - ATH5K_WARN(sc, "could not register LED %s\n", name); - led->sc = NULL; - } - return err; -} - -static void -ath5k_unregister_led(struct ath5k_led *led) -{ - if (!led->sc) - return; - led_classdev_unregister(&led->led_dev); - ath5k_led_off(led->sc); - led->sc = NULL; -} - -static void -ath5k_unregister_leds(struct ath5k_softc *sc) -{ - ath5k_unregister_led(&sc->rx_led); - ath5k_unregister_led(&sc->tx_led); -} - - -static int -ath5k_init_leds(struct ath5k_softc *sc) -{ - int ret = 0; - struct ieee80211_hw *hw = sc->hw; - struct pci_dev *pdev = sc->pdev; - char name[ATH5K_LED_MAX_NAME_LEN + 1]; - - /* - * Auto-enable soft led processing for IBM cards and for - * 5211 minipci cards. - */ - if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM || - pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) { - __set_bit(ATH_STAT_LEDSOFT, sc->status); - sc->led_pin = 0; - sc->led_on = 0; /* active low */ - } - /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */ - if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) { - __set_bit(ATH_STAT_LEDSOFT, sc->status); - sc->led_pin = 1; - sc->led_on = 1; /* active high */ - } - if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) - goto out; - - ath5k_led_enable(sc); - - snprintf(name, sizeof(name), "ath5k-%s::rx", wiphy_name(hw->wiphy)); - ret = ath5k_register_led(sc, &sc->rx_led, name, - ieee80211_get_rx_led_name(hw)); - if (ret) - goto out; - - snprintf(name, sizeof(name), "ath5k-%s::tx", wiphy_name(hw->wiphy)); - ret = ath5k_register_led(sc, &sc->tx_led, name, - ieee80211_get_tx_led_name(hw)); -out: - return ret; -} - - -/********************\ -* Mac80211 functions * -\********************/ - -static int -ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) -{ - struct ath5k_softc *sc = hw->priv; - struct ath5k_buf *bf; - unsigned long flags; - int hdrlen; - int padsize; - - ath5k_debug_dump_skb(sc, skb, "TX ", 1); - - if (sc->opmode == NL80211_IFTYPE_MONITOR) - ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, "tx in monitor (scan?)\n"); - - /* - * the hardware expects the header padded to 4 byte boundaries - * if this is not the case we add the padding after the header - */ - hdrlen = ieee80211_get_hdrlen_from_skb(skb); - padsize = ath5k_pad_size(hdrlen); - if (padsize) { - - if (skb_headroom(skb) < padsize) { - ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough" - " headroom to pad %d\n", hdrlen, padsize); - return NETDEV_TX_BUSY; - } - skb_push(skb, padsize); - memmove(skb->data, skb->data+padsize, hdrlen); - } - - spin_lock_irqsave(&sc->txbuflock, flags); - if (list_empty(&sc->txbuf)) { - ATH5K_ERR(sc, "no further txbuf available, dropping packet\n"); - spin_unlock_irqrestore(&sc->txbuflock, flags); - ieee80211_stop_queue(hw, skb_get_queue_mapping(skb)); - return NETDEV_TX_BUSY; - } - bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list); - list_del(&bf->list); - sc->txbuf_len--; - if (list_empty(&sc->txbuf)) - ieee80211_stop_queues(hw); - spin_unlock_irqrestore(&sc->txbuflock, flags); - - bf->skb = skb; - - if (ath5k_txbuf_setup(sc, bf)) { - bf->skb = NULL; - spin_lock_irqsave(&sc->txbuflock, flags); - list_add_tail(&bf->list, &sc->txbuf); - sc->txbuf_len++; - spin_unlock_irqrestore(&sc->txbuflock, flags); - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - - return NETDEV_TX_OK; -} - -static int -ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel) -{ - struct ath5k_hw *ah = sc->ah; - int ret; - - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n"); - - if (stop) { - ath5k_hw_set_imr(ah, 0); - ath5k_txq_cleanup(sc); - ath5k_rx_stop(sc); - } - ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true); - if (ret) { - ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret); - goto err; - } - - /* - * This is needed only to setup initial state - * but it's best done after a reset. - */ - ath5k_hw_set_txpower_limit(sc->ah, 0); - - ret = ath5k_rx_start(sc); - if (ret) { - ATH5K_ERR(sc, "can't start recv logic\n"); - goto err; - } - - /* - * Change channels and update the h/w rate map if we're switching; - * e.g. 11a to 11b/g. - * - * We may be doing a reset in response to an ioctl that changes the - * channel so update any state that might change as a result. - * - * XXX needed? - */ -/* ath5k_chan_change(sc, c); */ - - ath5k_beacon_config(sc); - /* intrs are enabled by ath5k_beacon_config */ - - return 0; -err: - return ret; -} - -static int -ath5k_reset_wake(struct ath5k_softc *sc) -{ - int ret; - - ret = ath5k_reset(sc, true, true); - if (!ret) - ieee80211_wake_queues(sc->hw); - - return ret; -} - -static int ath5k_start(struct ieee80211_hw *hw) -{ - return ath5k_init(hw->priv, false); -} - -static void ath5k_stop(struct ieee80211_hw *hw) -{ - ath5k_stop_hw(hw->priv, false); -} - -static int ath5k_add_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) -{ - struct ath5k_softc *sc = hw->priv; - int ret; - - mutex_lock(&sc->lock); - if (sc->vif) { - ret = 0; - goto end; - } - - sc->vif = conf->vif; - - switch (conf->type) { - case NL80211_IFTYPE_AP: - case NL80211_IFTYPE_STATION: - case NL80211_IFTYPE_ADHOC: - case NL80211_IFTYPE_MESH_POINT: - case NL80211_IFTYPE_MONITOR: - sc->opmode = conf->type; - break; - default: - ret = -EOPNOTSUPP; - goto end; - } - - /* Set to a reasonable value. Note that this will - * be set to mac80211's value at ath5k_config(). */ - sc->bintval = 1000; - ath5k_hw_set_lladdr(sc->ah, conf->mac_addr); - - ret = 0; -end: - mutex_unlock(&sc->lock); - return ret; -} - -static void -ath5k_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) -{ - struct ath5k_softc *sc = hw->priv; - u8 mac[ETH_ALEN] = {}; - - mutex_lock(&sc->lock); - if (sc->vif != conf->vif) - goto end; - - ath5k_hw_set_lladdr(sc->ah, mac); - sc->vif = NULL; -end: - mutex_unlock(&sc->lock); -} - -/* - * TODO: Phy disable/diversity etc - */ -static int -ath5k_config(struct ieee80211_hw *hw, u32 changed) -{ - struct ath5k_softc *sc = hw->priv; - struct ieee80211_conf *conf = &hw->conf; - int ret; - - mutex_lock(&sc->lock); - - sc->bintval = conf->beacon_int; - sc->power_level = conf->power_level; - - ret = ath5k_chan_set(sc, conf->channel); - - mutex_unlock(&sc->lock); - return ret; -} - -static int -ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; - int ret; - - mutex_lock(&sc->lock); - if (sc->vif != vif) { - ret = -EIO; - goto unlock; - } - if (conf->changed & IEEE80211_IFCC_BSSID && conf->bssid) { - /* Cache for later use during resets */ - memcpy(ah->ah_bssid, conf->bssid, ETH_ALEN); - /* XXX: assoc id is set to 0 for now, mac80211 doesn't have - * a clean way of letting us retrieve this yet. */ - ath5k_hw_set_associd(ah, ah->ah_bssid, 0); - mmiowb(); - } - if (conf->changed & IEEE80211_IFCC_BEACON && - (vif->type == NL80211_IFTYPE_ADHOC || - vif->type == NL80211_IFTYPE_MESH_POINT || - vif->type == NL80211_IFTYPE_AP)) { - struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); - if (!beacon) { - ret = -ENOMEM; - goto unlock; - } - ath5k_beacon_update(sc, beacon); - } - mutex_unlock(&sc->lock); - - return ath5k_reset_wake(sc); -unlock: - mutex_unlock(&sc->lock); - return ret; -} - -#define SUPPORTED_FIF_FLAGS \ - FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | \ - FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \ - FIF_BCN_PRBRESP_PROMISC -/* - * o always accept unicast, broadcast, and multicast traffic - * o multicast traffic for all BSSIDs will be enabled if mac80211 - * says it should be - * o maintain current state of phy ofdm or phy cck error reception. - * If the hardware detects any of these type of errors then - * ath5k_hw_get_rx_filter() will pass to us the respective - * hardware filters to be able to receive these type of frames. - * o probe request frames are accepted only when operating in - * hostap, adhoc, or monitor modes - * o enable promiscuous mode according to the interface state - * o accept beacons: - * - when operating in adhoc mode so the 802.11 layer creates - * node table entries for peers, - * - when operating in station mode for collecting rssi data when - * the station is otherwise quiet, or - * - when scanning - */ -static void ath5k_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *new_flags, - int mc_count, struct dev_mc_list *mclist) -{ - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; - u32 mfilt[2], val, rfilt; - u8 pos; - int i; - - mfilt[0] = 0; - mfilt[1] = 0; - - /* Only deal with supported flags */ - changed_flags &= SUPPORTED_FIF_FLAGS; - *new_flags &= SUPPORTED_FIF_FLAGS; - - /* If HW detects any phy or radar errors, leave those filters on. - * Also, always enable Unicast, Broadcasts and Multicast - * XXX: move unicast, bssid broadcasts and multicast to mac80211 */ - rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) | - (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST | - AR5K_RX_FILTER_MCAST); - - if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) { - if (*new_flags & FIF_PROMISC_IN_BSS) { - rfilt |= AR5K_RX_FILTER_PROM; - __set_bit(ATH_STAT_PROMISC, sc->status); - } else { - __clear_bit(ATH_STAT_PROMISC, sc->status); - } - } - - /* Note, AR5K_RX_FILTER_MCAST is already enabled */ - if (*new_flags & FIF_ALLMULTI) { - mfilt[0] = ~0; - mfilt[1] = ~0; - } else { - for (i = 0; i < mc_count; i++) { - if (!mclist) - break; - /* calculate XOR of eight 6-bit values */ - val = get_unaligned_le32(mclist->dmi_addr + 0); - pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; - val = get_unaligned_le32(mclist->dmi_addr + 3); - pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; - pos &= 0x3f; - mfilt[pos / 32] |= (1 << (pos % 32)); - /* XXX: we might be able to just do this instead, - * but not sure, needs testing, if we do use this we'd - * neet to inform below to not reset the mcast */ - /* ath5k_hw_set_mcast_filterindex(ah, - * mclist->dmi_addr[5]); */ - mclist = mclist->next; - } - } - - /* This is the best we can do */ - if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL)) - rfilt |= AR5K_RX_FILTER_PHYERR; - - /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons - * and probes for any BSSID, this needs testing */ - if (*new_flags & FIF_BCN_PRBRESP_PROMISC) - rfilt |= AR5K_RX_FILTER_BEACON | AR5K_RX_FILTER_PROBEREQ; - - /* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not - * set we should only pass on control frames for this - * station. This needs testing. I believe right now this - * enables *all* control frames, which is OK.. but - * but we should see if we can improve on granularity */ - if (*new_flags & FIF_CONTROL) - rfilt |= AR5K_RX_FILTER_CONTROL; - - /* Additional settings per mode -- this is per ath5k */ - - /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */ - - if (sc->opmode == NL80211_IFTYPE_MONITOR) - rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON | - AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM; - if (sc->opmode != NL80211_IFTYPE_STATION) - rfilt |= AR5K_RX_FILTER_PROBEREQ; - if (sc->opmode != NL80211_IFTYPE_AP && - sc->opmode != NL80211_IFTYPE_MESH_POINT && - test_bit(ATH_STAT_PROMISC, sc->status)) - rfilt |= AR5K_RX_FILTER_PROM; - if ((sc->opmode == NL80211_IFTYPE_STATION && sc->assoc) || - sc->opmode == NL80211_IFTYPE_ADHOC || - sc->opmode == NL80211_IFTYPE_AP) - rfilt |= AR5K_RX_FILTER_BEACON; - if (sc->opmode == NL80211_IFTYPE_MESH_POINT) - rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON | - AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM; - - /* Set filters */ - ath5k_hw_set_rx_filter(ah, rfilt); - - /* Set multicast bits */ - ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]); - /* Set the cached hw filter flags, this will alter actually - * be set in HW */ - sc->filter_flags = rfilt; -} - -static int -ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - const u8 *local_addr, const u8 *addr, - struct ieee80211_key_conf *key) -{ - struct ath5k_softc *sc = hw->priv; - int ret = 0; - - if (modparam_nohwcrypt) - return -EOPNOTSUPP; - - switch (key->alg) { - case ALG_WEP: - case ALG_TKIP: - break; - case ALG_CCMP: - return -EOPNOTSUPP; - default: - WARN_ON(1); - return -EINVAL; - } - - mutex_lock(&sc->lock); - - switch (cmd) { - case SET_KEY: - ret = ath5k_hw_set_key(sc->ah, key->keyidx, key, addr); - if (ret) { - ATH5K_ERR(sc, "can't set the key\n"); - goto unlock; - } - __set_bit(key->keyidx, sc->keymap); - key->hw_key_idx = key->keyidx; - key->flags |= (IEEE80211_KEY_FLAG_GENERATE_IV | - IEEE80211_KEY_FLAG_GENERATE_MMIC); - break; - case DISABLE_KEY: - ath5k_hw_reset_key(sc->ah, key->keyidx); - __clear_bit(key->keyidx, sc->keymap); - break; - default: - ret = -EINVAL; - goto unlock; - } - -unlock: - mmiowb(); - mutex_unlock(&sc->lock); - return ret; -} - -static int -ath5k_get_stats(struct ieee80211_hw *hw, - struct ieee80211_low_level_stats *stats) -{ - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; - - /* Force update */ - ath5k_hw_update_mib_counters(ah, &sc->ll_stats); - - memcpy(stats, &sc->ll_stats, sizeof(sc->ll_stats)); - - return 0; -} - -static int -ath5k_get_tx_stats(struct ieee80211_hw *hw, - struct ieee80211_tx_queue_stats *stats) -{ - struct ath5k_softc *sc = hw->priv; - - memcpy(stats, &sc->tx_stats, sizeof(sc->tx_stats)); - - return 0; -} - -static u64 -ath5k_get_tsf(struct ieee80211_hw *hw) -{ - struct ath5k_softc *sc = hw->priv; - - return ath5k_hw_get_tsf64(sc->ah); -} - -static void -ath5k_reset_tsf(struct ieee80211_hw *hw) -{ - struct ath5k_softc *sc = hw->priv; - - /* - * in IBSS mode we need to update the beacon timers too. - * this will also reset the TSF if we call it with 0 - */ - if (sc->opmode == NL80211_IFTYPE_ADHOC) - ath5k_beacon_update_timers(sc, 0); - else - ath5k_hw_reset_tsf(sc->ah); -} - -static int -ath5k_beacon_update(struct ath5k_softc *sc, struct sk_buff *skb) -{ - unsigned long flags; - int ret; - - ath5k_debug_dump_skb(sc, skb, "BC ", 1); - - spin_lock_irqsave(&sc->block, flags); - ath5k_txbuf_free(sc, sc->bbuf); - sc->bbuf->skb = skb; - ret = ath5k_beacon_setup(sc, sc->bbuf); - if (ret) - sc->bbuf->skb = NULL; - spin_unlock_irqrestore(&sc->block, flags); - if (!ret) { - ath5k_beacon_config(sc); - mmiowb(); - } - - return ret; -} -static void -set_beacon_filter(struct ieee80211_hw *hw, bool enable) -{ - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; - u32 rfilt; - rfilt = ath5k_hw_get_rx_filter(ah); - if (enable) - rfilt |= AR5K_RX_FILTER_BEACON; - else - rfilt &= ~AR5K_RX_FILTER_BEACON; - ath5k_hw_set_rx_filter(ah, rfilt); - sc->filter_flags = rfilt; -} - -static void ath5k_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, - u32 changes) -{ - struct ath5k_softc *sc = hw->priv; - if (changes & BSS_CHANGED_ASSOC) { - mutex_lock(&sc->lock); - sc->assoc = bss_conf->assoc; - if (sc->opmode == NL80211_IFTYPE_STATION) - set_beacon_filter(hw, sc->assoc); - mutex_unlock(&sc->lock); - } -} diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h deleted file mode 100644 index facc60ddada..00000000000 --- a/drivers/net/wireless/ath5k/base.h +++ /dev/null @@ -1,190 +0,0 @@ -/*- - * Copyright (c) 2002-2007 Sam Leffler, Errno Consulting - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any - * redistribution must be conditioned upon including a substantially - * similar Disclaimer requirement for further binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY - * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL - * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, - * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER - * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - * THE POSSIBILITY OF SUCH DAMAGES. - * - */ - -/* - * Defintions for the Atheros Wireless LAN controller driver. - */ -#ifndef _DEV_ATH_ATHVAR_H -#define _DEV_ATH_ATHVAR_H - -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/wireless.h> -#include <linux/if_ether.h> -#include <linux/leds.h> - -#include "ath5k.h" -#include "debug.h" - -#define ATH_RXBUF 40 /* number of RX buffers */ -#define ATH_TXBUF 200 /* number of TX buffers */ -#define ATH_BCBUF 1 /* number of beacon buffers */ - -struct ath5k_buf { - struct list_head list; - unsigned int flags; /* rx descriptor flags */ - struct ath5k_desc *desc; /* virtual addr of desc */ - dma_addr_t daddr; /* physical addr of desc */ - struct sk_buff *skb; /* skbuff for buf */ - dma_addr_t skbaddr;/* physical addr of skb data */ -}; - -/* - * Data transmit queue state. One of these exists for each - * hardware transmit queue. Packets sent to us from above - * are assigned to queues based on their priority. Not all - * devices support a complete set of hardware transmit queues. - * For those devices the array sc_ac2q will map multiple - * priorities to fewer hardware queues (typically all to one - * hardware queue). - */ -struct ath5k_txq { - unsigned int qnum; /* hardware q number */ - u32 *link; /* link ptr in last TX desc */ - struct list_head q; /* transmit queue */ - spinlock_t lock; /* lock on q and link */ - bool setup; -}; - -#define ATH5K_LED_MAX_NAME_LEN 31 - -/* - * State for LED triggers - */ -struct ath5k_led -{ - char name[ATH5K_LED_MAX_NAME_LEN + 1]; /* name of the LED in sysfs */ - struct ath5k_softc *sc; /* driver state */ - struct led_classdev led_dev; /* led classdev */ -}; - - -#if CHAN_DEBUG -#define ATH_CHAN_MAX (26+26+26+200+200) -#else -#define ATH_CHAN_MAX (14+14+14+252+20) -#endif - -/* Software Carrier, keeps track of the driver state - * associated with an instance of a device */ -struct ath5k_softc { - struct pci_dev *pdev; /* for dma mapping */ - void __iomem *iobase; /* address of the device */ - struct mutex lock; /* dev-level lock */ - /* FIXME: how many does it really need? */ - struct ieee80211_tx_queue_stats tx_stats[16]; - struct ieee80211_low_level_stats ll_stats; - struct ieee80211_hw *hw; /* IEEE 802.11 common */ - struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; - struct ieee80211_channel channels[ATH_CHAN_MAX]; - struct ieee80211_rate rates[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; - u8 rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; - enum nl80211_iftype opmode; - struct ath5k_hw *ah; /* Atheros HW */ - - struct ieee80211_supported_band *curband; - -#ifdef CONFIG_ATH5K_DEBUG - struct ath5k_dbg_info debug; /* debug info */ -#endif /* CONFIG_ATH5K_DEBUG */ - - struct ath5k_buf *bufptr; /* allocated buffer ptr */ - struct ath5k_desc *desc; /* TX/RX descriptors */ - dma_addr_t desc_daddr; /* DMA (physical) address */ - size_t desc_len; /* size of TX/RX descriptors */ - u16 cachelsz; /* cache line size */ - - DECLARE_BITMAP(status, 5); -#define ATH_STAT_INVALID 0 /* disable hardware accesses */ -#define ATH_STAT_MRRETRY 1 /* multi-rate retry support */ -#define ATH_STAT_PROMISC 2 -#define ATH_STAT_LEDSOFT 3 /* enable LED gpio status */ -#define ATH_STAT_STARTED 4 /* opened & irqs enabled */ - - unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ - unsigned int curmode; /* current phy mode */ - struct ieee80211_channel *curchan; /* current h/w channel */ - - struct ieee80211_vif *vif; - - enum ath5k_int imask; /* interrupt mask copy */ - - DECLARE_BITMAP(keymap, AR5K_KEYCACHE_SIZE); /* key use bit map */ - - u8 bssidmask[ETH_ALEN]; - - unsigned int led_pin, /* GPIO pin for driving LED */ - led_on, /* pin setting for LED on */ - led_off; /* off time for current blink */ - - struct tasklet_struct restq; /* reset tasklet */ - - unsigned int rxbufsize; /* rx size based on mtu */ - struct list_head rxbuf; /* receive buffer */ - spinlock_t rxbuflock; - u32 *rxlink; /* link ptr in last RX desc */ - struct tasklet_struct rxtq; /* rx intr tasklet */ - struct ath5k_led rx_led; /* rx led */ - - struct list_head txbuf; /* transmit buffer */ - spinlock_t txbuflock; - unsigned int txbuf_len; /* buf count in txbuf list */ - struct ath5k_txq txqs[2]; /* beacon and tx */ - - struct ath5k_txq *txq; /* beacon and tx*/ - struct tasklet_struct txtq; /* tx intr tasklet */ - struct ath5k_led tx_led; /* tx led */ - - spinlock_t block; /* protects beacon */ - struct ath5k_buf *bbuf; /* beacon buffer */ - unsigned int bhalq, /* SW q for outgoing beacons */ - bmisscount, /* missed beacon transmits */ - bintval, /* beacon interval in TU */ - bsent; - unsigned int nexttbtt; /* next beacon time in TU */ - - struct timer_list calib_tim; /* calibration timer */ - int power_level; /* Requested tx power in dbm */ - bool assoc; /* assocate state */ -}; - -#define ath5k_hw_hasbssidmask(_ah) \ - (ath5k_hw_get_capability(_ah, AR5K_CAP_BSSIDMASK, 0, NULL) == 0) -#define ath5k_hw_hasveol(_ah) \ - (ath5k_hw_get_capability(_ah, AR5K_CAP_VEOL, 0, NULL) == 0) - -#endif diff --git a/drivers/net/wireless/ath5k/caps.c b/drivers/net/wireless/ath5k/caps.c deleted file mode 100644 index 150f5ed204a..00000000000 --- a/drivers/net/wireless/ath5k/caps.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -/**************\ -* Capabilities * -\**************/ - -#include "ath5k.h" -#include "reg.h" -#include "debug.h" -#include "base.h" - -/* - * Fill the capabilities struct - * TODO: Merge this with EEPROM code when we are done with it - */ -int ath5k_hw_set_capabilities(struct ath5k_hw *ah) -{ - u16 ee_header; - - ATH5K_TRACE(ah->ah_sc); - /* Capabilities stored in the EEPROM */ - ee_header = ah->ah_capabilities.cap_eeprom.ee_header; - - if (ah->ah_version == AR5K_AR5210) { - /* - * Set radio capabilities - * (The AR5110 only supports the middle 5GHz band) - */ - ah->ah_capabilities.cap_range.range_5ghz_min = 5120; - ah->ah_capabilities.cap_range.range_5ghz_max = 5430; - ah->ah_capabilities.cap_range.range_2ghz_min = 0; - ah->ah_capabilities.cap_range.range_2ghz_max = 0; - - /* Set supported modes */ - __set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode); - __set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode); - } else { - /* - * XXX The tranceiver supports frequencies from 4920 to 6100GHz - * XXX and from 2312 to 2732GHz. There are problems with the - * XXX current ieee80211 implementation because the IEEE - * XXX channel mapping does not support negative channel - * XXX numbers (2312MHz is channel -19). Of course, this - * XXX doesn't matter because these channels are out of range - * XXX but some regulation domains like MKK (Japan) will - * XXX support frequencies somewhere around 4.8GHz. - */ - - /* - * Set radio capabilities - */ - - if (AR5K_EEPROM_HDR_11A(ee_header)) { - /* 4920 */ - ah->ah_capabilities.cap_range.range_5ghz_min = 5005; - ah->ah_capabilities.cap_range.range_5ghz_max = 6100; - - /* Set supported modes */ - __set_bit(AR5K_MODE_11A, - ah->ah_capabilities.cap_mode); - __set_bit(AR5K_MODE_11A_TURBO, - ah->ah_capabilities.cap_mode); - if (ah->ah_version == AR5K_AR5212) - __set_bit(AR5K_MODE_11G_TURBO, - ah->ah_capabilities.cap_mode); - } - - /* Enable 802.11b if a 2GHz capable radio (2111/5112) is - * connected */ - if (AR5K_EEPROM_HDR_11B(ee_header) || - AR5K_EEPROM_HDR_11G(ee_header)) { - /* 2312 */ - ah->ah_capabilities.cap_range.range_2ghz_min = 2412; - ah->ah_capabilities.cap_range.range_2ghz_max = 2732; - - if (AR5K_EEPROM_HDR_11B(ee_header)) - __set_bit(AR5K_MODE_11B, - ah->ah_capabilities.cap_mode); - - if (AR5K_EEPROM_HDR_11G(ee_header)) - __set_bit(AR5K_MODE_11G, - ah->ah_capabilities.cap_mode); - } - } - - /* GPIO */ - ah->ah_gpio_npins = AR5K_NUM_GPIO; - - /* Set number of supported TX queues */ - if (ah->ah_version == AR5K_AR5210) - ah->ah_capabilities.cap_queues.q_tx_num = - AR5K_NUM_TX_QUEUES_NOQCU; - else - ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES; - - return 0; -} - -/* Main function used by the driver part to check caps */ -int ath5k_hw_get_capability(struct ath5k_hw *ah, - enum ath5k_capability_type cap_type, - u32 capability, u32 *result) -{ - ATH5K_TRACE(ah->ah_sc); - - switch (cap_type) { - case AR5K_CAP_NUM_TXQUEUES: - if (result) { - if (ah->ah_version == AR5K_AR5210) - *result = AR5K_NUM_TX_QUEUES_NOQCU; - else - *result = AR5K_NUM_TX_QUEUES; - goto yes; - } - case AR5K_CAP_VEOL: - goto yes; - case AR5K_CAP_COMPRESSION: - if (ah->ah_version == AR5K_AR5212) - goto yes; - else - goto no; - case AR5K_CAP_BURST: - goto yes; - case AR5K_CAP_TPC: - goto yes; - case AR5K_CAP_BSSIDMASK: - if (ah->ah_version == AR5K_AR5212) - goto yes; - else - goto no; - case AR5K_CAP_XR: - if (ah->ah_version == AR5K_AR5212) - goto yes; - else - goto no; - default: - goto no; - } - -no: - return -EINVAL; -yes: - return 0; -} - -/* - * TODO: Following functions should be part of a new function - * set_capability - */ - -int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, - u16 assoc_id) -{ - ATH5K_TRACE(ah->ah_sc); - - if (ah->ah_version == AR5K_AR5210) { - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); - return 0; - } - - return -EIO; -} - -int ath5k_hw_disable_pspoll(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - - if (ah->ah_version == AR5K_AR5210) { - AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); - return 0; - } - - return -EIO; -} diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c deleted file mode 100644 index ccaeb5c219d..00000000000 --- a/drivers/net/wireless/ath5k/debug.c +++ /dev/null @@ -1,579 +0,0 @@ -/* - * Copyright (c) 2007-2008 Bruno Randolf <bruno@thinktube.com> - * - * This file is free software: you may copy, redistribute and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation, either version 2 of the License, or (at your - * option) any later version. - * - * This file is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * - * This file incorporates work covered by the following copyright and - * permission notice: - * - * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting - * Copyright (c) 2004-2005 Atheros Communications, Inc. - * Copyright (c) 2006 Devicescape Software, Inc. - * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> - * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> - * - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any - * redistribution must be conditioned upon including a substantially - * similar Disclaimer requirement for further binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY - * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL - * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, - * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER - * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - * THE POSSIBILITY OF SUCH DAMAGES. - */ - -#include "base.h" -#include "debug.h" - -static unsigned int ath5k_debug; -module_param_named(debug, ath5k_debug, uint, 0); - - -#ifdef CONFIG_ATH5K_DEBUG - -#include <linux/seq_file.h> -#include "reg.h" - -static struct dentry *ath5k_global_debugfs; - -static int ath5k_debugfs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - - -/* debugfs: registers */ - -struct reg { - char *name; - int addr; -}; - -#define REG_STRUCT_INIT(r) { #r, r } - -/* just a few random registers, might want to add more */ -static struct reg regs[] = { - REG_STRUCT_INIT(AR5K_CR), - REG_STRUCT_INIT(AR5K_RXDP), - REG_STRUCT_INIT(AR5K_CFG), - REG_STRUCT_INIT(AR5K_IER), - REG_STRUCT_INIT(AR5K_BCR), - REG_STRUCT_INIT(AR5K_RTSD0), - REG_STRUCT_INIT(AR5K_RTSD1), - REG_STRUCT_INIT(AR5K_TXCFG), - REG_STRUCT_INIT(AR5K_RXCFG), - REG_STRUCT_INIT(AR5K_RXJLA), - REG_STRUCT_INIT(AR5K_MIBC), - REG_STRUCT_INIT(AR5K_TOPS), - REG_STRUCT_INIT(AR5K_RXNOFRM), - REG_STRUCT_INIT(AR5K_TXNOFRM), - REG_STRUCT_INIT(AR5K_RPGTO), - REG_STRUCT_INIT(AR5K_RFCNT), - REG_STRUCT_INIT(AR5K_MISC), - REG_STRUCT_INIT(AR5K_QCUDCU_CLKGT), - REG_STRUCT_INIT(AR5K_ISR), - REG_STRUCT_INIT(AR5K_PISR), - REG_STRUCT_INIT(AR5K_SISR0), - REG_STRUCT_INIT(AR5K_SISR1), - REG_STRUCT_INIT(AR5K_SISR2), - REG_STRUCT_INIT(AR5K_SISR3), - REG_STRUCT_INIT(AR5K_SISR4), - REG_STRUCT_INIT(AR5K_IMR), - REG_STRUCT_INIT(AR5K_PIMR), - REG_STRUCT_INIT(AR5K_SIMR0), - REG_STRUCT_INIT(AR5K_SIMR1), - REG_STRUCT_INIT(AR5K_SIMR2), - REG_STRUCT_INIT(AR5K_SIMR3), - REG_STRUCT_INIT(AR5K_SIMR4), - REG_STRUCT_INIT(AR5K_DCM_ADDR), - REG_STRUCT_INIT(AR5K_DCCFG), - REG_STRUCT_INIT(AR5K_CCFG), - REG_STRUCT_INIT(AR5K_CPC0), - REG_STRUCT_INIT(AR5K_CPC1), - REG_STRUCT_INIT(AR5K_CPC2), - REG_STRUCT_INIT(AR5K_CPC3), - REG_STRUCT_INIT(AR5K_CPCOVF), - REG_STRUCT_INIT(AR5K_RESET_CTL), - REG_STRUCT_INIT(AR5K_SLEEP_CTL), - REG_STRUCT_INIT(AR5K_INTPEND), - REG_STRUCT_INIT(AR5K_SFR), - REG_STRUCT_INIT(AR5K_PCICFG), - REG_STRUCT_INIT(AR5K_GPIOCR), - REG_STRUCT_INIT(AR5K_GPIODO), - REG_STRUCT_INIT(AR5K_SREV), -}; - -static void *reg_start(struct seq_file *seq, loff_t *pos) -{ - return *pos < ARRAY_SIZE(regs) ? ®s[*pos] : NULL; -} - -static void reg_stop(struct seq_file *seq, void *p) -{ - /* nothing to do */ -} - -static void *reg_next(struct seq_file *seq, void *p, loff_t *pos) -{ - ++*pos; - return *pos < ARRAY_SIZE(regs) ? ®s[*pos] : NULL; -} - -static int reg_show(struct seq_file *seq, void *p) -{ - struct ath5k_softc *sc = seq->private; - struct reg *r = p; - seq_printf(seq, "%-25s0x%08x\n", r->name, - ath5k_hw_reg_read(sc->ah, r->addr)); - return 0; -} - -static struct seq_operations register_seq_ops = { - .start = reg_start, - .next = reg_next, - .stop = reg_stop, - .show = reg_show -}; - -static int open_file_registers(struct inode *inode, struct file *file) -{ - struct seq_file *s; - int res; - res = seq_open(file, ®ister_seq_ops); - if (res == 0) { - s = file->private_data; - s->private = inode->i_private; - } - return res; -} - -static const struct file_operations fops_registers = { - .open = open_file_registers, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, - .owner = THIS_MODULE, -}; - - -/* debugfs: TSF */ - -static ssize_t read_file_tsf(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ath5k_softc *sc = file->private_data; - char buf[100]; - snprintf(buf, sizeof(buf), "0x%016llx\n", - (unsigned long long)ath5k_hw_get_tsf64(sc->ah)); - return simple_read_from_buffer(user_buf, count, ppos, buf, 19); -} - -static ssize_t write_file_tsf(struct file *file, - const char __user *userbuf, - size_t count, loff_t *ppos) -{ - struct ath5k_softc *sc = file->private_data; - char buf[20]; - - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) - return -EFAULT; - - if (strncmp(buf, "reset", 5) == 0) { - ath5k_hw_reset_tsf(sc->ah); - printk(KERN_INFO "debugfs reset TSF\n"); - } - return count; -} - -static const struct file_operations fops_tsf = { - .read = read_file_tsf, - .write = write_file_tsf, - .open = ath5k_debugfs_open, - .owner = THIS_MODULE, -}; - - -/* debugfs: beacons */ - -static ssize_t read_file_beacon(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ath5k_softc *sc = file->private_data; - struct ath5k_hw *ah = sc->ah; - char buf[500]; - unsigned int len = 0; - unsigned int v; - u64 tsf; - - v = ath5k_hw_reg_read(sc->ah, AR5K_BEACON); - len += snprintf(buf+len, sizeof(buf)-len, - "%-24s0x%08x\tintval: %d\tTIM: 0x%x\n", - "AR5K_BEACON", v, v & AR5K_BEACON_PERIOD, - (v & AR5K_BEACON_TIM) >> AR5K_BEACON_TIM_S); - - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\n", - "AR5K_LAST_TSTP", ath5k_hw_reg_read(sc->ah, AR5K_LAST_TSTP)); - - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\n\n", - "AR5K_BEACON_CNT", ath5k_hw_reg_read(sc->ah, AR5K_BEACON_CNT)); - - v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER0); - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n", - "AR5K_TIMER0 (TBTT)", v, v); - - v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER1); - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n", - "AR5K_TIMER1 (DMA)", v, v >> 3); - - v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER2); - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n", - "AR5K_TIMER2 (SWBA)", v, v >> 3); - - v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER3); - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n", - "AR5K_TIMER3 (ATIM)", v, v); - - tsf = ath5k_hw_get_tsf64(sc->ah); - len += snprintf(buf+len, sizeof(buf)-len, - "TSF\t\t0x%016llx\tTU: %08x\n", - (unsigned long long)tsf, TSF_TO_TU(tsf)); - - return simple_read_from_buffer(user_buf, count, ppos, buf, len); -} - -static ssize_t write_file_beacon(struct file *file, - const char __user *userbuf, - size_t count, loff_t *ppos) -{ - struct ath5k_softc *sc = file->private_data; - struct ath5k_hw *ah = sc->ah; - char buf[20]; - - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) - return -EFAULT; - - if (strncmp(buf, "disable", 7) == 0) { - AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE); - printk(KERN_INFO "debugfs disable beacons\n"); - } else if (strncmp(buf, "enable", 6) == 0) { - AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE); - printk(KERN_INFO "debugfs enable beacons\n"); - } - return count; -} - -static const struct file_operations fops_beacon = { - .read = read_file_beacon, - .write = write_file_beacon, - .open = ath5k_debugfs_open, - .owner = THIS_MODULE, -}; - - -/* debugfs: reset */ - -static ssize_t write_file_reset(struct file *file, - const char __user *userbuf, - size_t count, loff_t *ppos) -{ - struct ath5k_softc *sc = file->private_data; - tasklet_schedule(&sc->restq); - return count; -} - -static const struct file_operations fops_reset = { - .write = write_file_reset, - .open = ath5k_debugfs_open, - .owner = THIS_MODULE, -}; - - -/* debugfs: debug level */ - -static struct { - enum ath5k_debug_level level; - const char *name; - const char *desc; -} dbg_info[] = { - { ATH5K_DEBUG_RESET, "reset", "reset and initialization" }, - { ATH5K_DEBUG_INTR, "intr", "interrupt handling" }, - { ATH5K_DEBUG_MODE, "mode", "mode init/setup" }, - { ATH5K_DEBUG_XMIT, "xmit", "basic xmit operation" }, - { ATH5K_DEBUG_BEACON, "beacon", "beacon handling" }, - { ATH5K_DEBUG_CALIBRATE, "calib", "periodic calibration" }, - { ATH5K_DEBUG_TXPOWER, "txpower", "transmit power setting" }, - { ATH5K_DEBUG_LED, "led", "LED management" }, - { ATH5K_DEBUG_DUMP_RX, "dumprx", "print received skb content" }, - { ATH5K_DEBUG_DUMP_TX, "dumptx", "print transmit skb content" }, - { ATH5K_DEBUG_DUMPBANDS, "dumpbands", "dump bands" }, - { ATH5K_DEBUG_TRACE, "trace", "trace function calls" }, - { ATH5K_DEBUG_ANY, "all", "show all debug levels" }, -}; - -static ssize_t read_file_debug(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ath5k_softc *sc = file->private_data; - char buf[700]; - unsigned int len = 0; - unsigned int i; - - len += snprintf(buf+len, sizeof(buf)-len, - "DEBUG LEVEL: 0x%08x\n\n", sc->debug.level); - - for (i = 0; i < ARRAY_SIZE(dbg_info) - 1; i++) { - len += snprintf(buf+len, sizeof(buf)-len, - "%10s %c 0x%08x - %s\n", dbg_info[i].name, - sc->debug.level & dbg_info[i].level ? '+' : ' ', - dbg_info[i].level, dbg_info[i].desc); - } - len += snprintf(buf+len, sizeof(buf)-len, - "%10s %c 0x%08x - %s\n", dbg_info[i].name, - sc->debug.level == dbg_info[i].level ? '+' : ' ', - dbg_info[i].level, dbg_info[i].desc); - - return simple_read_from_buffer(user_buf, count, ppos, buf, len); -} - -static ssize_t write_file_debug(struct file *file, - const char __user *userbuf, - size_t count, loff_t *ppos) -{ - struct ath5k_softc *sc = file->private_data; - unsigned int i; - char buf[20]; - - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) - return -EFAULT; - - for (i = 0; i < ARRAY_SIZE(dbg_info); i++) { - if (strncmp(buf, dbg_info[i].name, - strlen(dbg_info[i].name)) == 0) { - sc->debug.level ^= dbg_info[i].level; /* toggle bit */ - break; - } - } - return count; -} - -static const struct file_operations fops_debug = { - .read = read_file_debug, - .write = write_file_debug, - .open = ath5k_debugfs_open, - .owner = THIS_MODULE, -}; - - -/* init */ - -void -ath5k_debug_init(void) -{ - ath5k_global_debugfs = debugfs_create_dir("ath5k", NULL); -} - -void -ath5k_debug_init_device(struct ath5k_softc *sc) -{ - sc->debug.level = ath5k_debug; - - sc->debug.debugfs_phydir = debugfs_create_dir(wiphy_name(sc->hw->wiphy), - ath5k_global_debugfs); - - sc->debug.debugfs_debug = debugfs_create_file("debug", S_IWUSR | S_IRUGO, - sc->debug.debugfs_phydir, sc, &fops_debug); - - sc->debug.debugfs_registers = debugfs_create_file("registers", S_IRUGO, - sc->debug.debugfs_phydir, sc, &fops_registers); - - sc->debug.debugfs_tsf = debugfs_create_file("tsf", S_IWUSR | S_IRUGO, - sc->debug.debugfs_phydir, sc, &fops_tsf); - - sc->debug.debugfs_beacon = debugfs_create_file("beacon", S_IWUSR | S_IRUGO, - sc->debug.debugfs_phydir, sc, &fops_beacon); - - sc->debug.debugfs_reset = debugfs_create_file("reset", S_IWUSR, - sc->debug.debugfs_phydir, sc, &fops_reset); -} - -void -ath5k_debug_finish(void) -{ - debugfs_remove(ath5k_global_debugfs); -} - -void -ath5k_debug_finish_device(struct ath5k_softc *sc) -{ - debugfs_remove(sc->debug.debugfs_debug); - debugfs_remove(sc->debug.debugfs_registers); - debugfs_remove(sc->debug.debugfs_tsf); - debugfs_remove(sc->debug.debugfs_beacon); - debugfs_remove(sc->debug.debugfs_reset); - debugfs_remove(sc->debug.debugfs_phydir); -} - - -/* functions used in other places */ - -void -ath5k_debug_dump_bands(struct ath5k_softc *sc) -{ - unsigned int b, i; - - if (likely(!(sc->debug.level & ATH5K_DEBUG_DUMPBANDS))) - return; - - BUG_ON(!sc->sbands); - - for (b = 0; b < IEEE80211_NUM_BANDS; b++) { - struct ieee80211_supported_band *band = &sc->sbands[b]; - char bname[5]; - switch (band->band) { - case IEEE80211_BAND_2GHZ: - strcpy(bname, "2 GHz"); - break; - case IEEE80211_BAND_5GHZ: - strcpy(bname, "5 GHz"); - break; - default: - printk(KERN_DEBUG "Band not supported: %d\n", - band->band); - return; - } - printk(KERN_DEBUG "Band %s: channels %d, rates %d\n", bname, - band->n_channels, band->n_bitrates); - printk(KERN_DEBUG " channels:\n"); - for (i = 0; i < band->n_channels; i++) - printk(KERN_DEBUG " %3d %d %.4x %.4x\n", - ieee80211_frequency_to_channel( - band->channels[i].center_freq), - band->channels[i].center_freq, - band->channels[i].hw_value, - band->channels[i].flags); - printk(KERN_DEBUG " rates:\n"); - for (i = 0; i < band->n_bitrates; i++) - printk(KERN_DEBUG " %4d %.4x %.4x %.4x\n", - band->bitrates[i].bitrate, - band->bitrates[i].hw_value, - band->bitrates[i].flags, - band->bitrates[i].hw_value_short); - } -} - -static inline void -ath5k_debug_printrxbuf(struct ath5k_buf *bf, int done, - struct ath5k_rx_status *rs) -{ - struct ath5k_desc *ds = bf->desc; - struct ath5k_hw_all_rx_desc *rd = &ds->ud.ds_rx; - - printk(KERN_DEBUG "R (%p %llx) %08x %08x %08x %08x %08x %08x %c\n", - ds, (unsigned long long)bf->daddr, - ds->ds_link, ds->ds_data, - rd->rx_ctl.rx_control_0, rd->rx_ctl.rx_control_1, - rd->u.rx_stat.rx_status_0, rd->u.rx_stat.rx_status_0, - !done ? ' ' : (rs->rs_status == 0) ? '*' : '!'); -} - -void -ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah) -{ - struct ath5k_desc *ds; - struct ath5k_buf *bf; - struct ath5k_rx_status rs = {}; - int status; - - if (likely(!(sc->debug.level & ATH5K_DEBUG_RESET))) - return; - - printk(KERN_DEBUG "rx queue %x, link %p\n", - ath5k_hw_get_rxdp(ah), sc->rxlink); - - spin_lock_bh(&sc->rxbuflock); - list_for_each_entry(bf, &sc->rxbuf, list) { - ds = bf->desc; - status = ah->ah_proc_rx_desc(ah, ds, &rs); - if (!status) - ath5k_debug_printrxbuf(bf, status == 0, &rs); - } - spin_unlock_bh(&sc->rxbuflock); -} - -void -ath5k_debug_dump_skb(struct ath5k_softc *sc, - struct sk_buff *skb, const char *prefix, int tx) -{ - char buf[16]; - - if (likely(!((tx && (sc->debug.level & ATH5K_DEBUG_DUMP_TX)) || - (!tx && (sc->debug.level & ATH5K_DEBUG_DUMP_RX))))) - return; - - snprintf(buf, sizeof(buf), "%s %s", wiphy_name(sc->hw->wiphy), prefix); - - print_hex_dump_bytes(buf, DUMP_PREFIX_NONE, skb->data, - min(200U, skb->len)); - - printk(KERN_DEBUG "\n"); -} - -void -ath5k_debug_printtxbuf(struct ath5k_softc *sc, struct ath5k_buf *bf) -{ - struct ath5k_desc *ds = bf->desc; - struct ath5k_hw_5212_tx_desc *td = &ds->ud.ds_tx5212; - struct ath5k_tx_status ts = {}; - int done; - - if (likely(!(sc->debug.level & ATH5K_DEBUG_RESET))) - return; - - done = sc->ah->ah_proc_tx_desc(sc->ah, bf->desc, &ts); - - printk(KERN_DEBUG "T (%p %llx) %08x %08x %08x %08x %08x %08x %08x " - "%08x %c\n", ds, (unsigned long long)bf->daddr, ds->ds_link, - ds->ds_data, td->tx_ctl.tx_control_0, td->tx_ctl.tx_control_1, - td->tx_ctl.tx_control_2, td->tx_ctl.tx_control_3, - td->tx_stat.tx_status_0, td->tx_stat.tx_status_1, - done ? ' ' : (ts.ts_status == 0) ? '*' : '!'); -} - -#endif /* ifdef CONFIG_ATH5K_DEBUG */ diff --git a/drivers/net/wireless/ath5k/debug.h b/drivers/net/wireless/ath5k/debug.h deleted file mode 100644 index ffc52939330..00000000000 --- a/drivers/net/wireless/ath5k/debug.h +++ /dev/null @@ -1,204 +0,0 @@ -/* - * Copyright (c) 2007 Bruno Randolf <bruno@thinktube.com> - * - * This file is free software: you may copy, redistribute and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation, either version 2 of the License, or (at your - * option) any later version. - * - * This file is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * - * This file incorporates work covered by the following copyright and - * permission notice: - * - * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting - * Copyright (c) 2004-2005 Atheros Communications, Inc. - * Copyright (c) 2006 Devicescape Software, Inc. - * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> - * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> - * - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any - * redistribution must be conditioned upon including a substantially - * similar Disclaimer requirement for further binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY - * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL - * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, - * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER - * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - * THE POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef _ATH5K_DEBUG_H -#define _ATH5K_DEBUG_H - -struct ath5k_softc; -struct ath5k_hw; -struct sk_buff; -struct ath5k_buf; - -struct ath5k_dbg_info { - unsigned int level; /* debug level */ - /* debugfs entries */ - struct dentry *debugfs_phydir; - struct dentry *debugfs_debug; - struct dentry *debugfs_registers; - struct dentry *debugfs_tsf; - struct dentry *debugfs_beacon; - struct dentry *debugfs_reset; -}; - -/** - * enum ath5k_debug_level - ath5k debug level - * - * @ATH5K_DEBUG_RESET: reset processing - * @ATH5K_DEBUG_INTR: interrupt handling - * @ATH5K_DEBUG_MODE: mode init/setup - * @ATH5K_DEBUG_XMIT: basic xmit operation - * @ATH5K_DEBUG_BEACON: beacon handling - * @ATH5K_DEBUG_CALIBRATE: periodic calibration - * @ATH5K_DEBUG_TXPOWER: transmit power setting - * @ATH5K_DEBUG_LED: led management - * @ATH5K_DEBUG_DUMP_RX: print received skb content - * @ATH5K_DEBUG_DUMP_TX: print transmit skb content - * @ATH5K_DEBUG_DUMPBANDS: dump bands - * @ATH5K_DEBUG_TRACE: trace function calls - * @ATH5K_DEBUG_ANY: show at any debug level - * - * The debug level is used to control the amount and type of debugging output - * we want to see. The debug level is given in calls to ATH5K_DBG to specify - * where the message should appear, and the user can control the debugging - * messages he wants to see, either by the module parameter 'debug' on module - * load, or dynamically by using debugfs 'ath5k/phyX/debug'. these levels can - * be combined together by bitwise OR. - */ -enum ath5k_debug_level { - ATH5K_DEBUG_RESET = 0x00000001, - ATH5K_DEBUG_INTR = 0x00000002, - ATH5K_DEBUG_MODE = 0x00000004, - ATH5K_DEBUG_XMIT = 0x00000008, - ATH5K_DEBUG_BEACON = 0x00000010, - ATH5K_DEBUG_CALIBRATE = 0x00000020, - ATH5K_DEBUG_TXPOWER = 0x00000040, - ATH5K_DEBUG_LED = 0x00000080, - ATH5K_DEBUG_DUMP_RX = 0x00000100, - ATH5K_DEBUG_DUMP_TX = 0x00000200, - ATH5K_DEBUG_DUMPBANDS = 0x00000400, - ATH5K_DEBUG_TRACE = 0x00001000, - ATH5K_DEBUG_ANY = 0xffffffff -}; - -#ifdef CONFIG_ATH5K_DEBUG - -#define ATH5K_TRACE(_sc) do { \ - if (unlikely((_sc)->debug.level & ATH5K_DEBUG_TRACE)) \ - printk(KERN_DEBUG "ath5k trace %s:%d\n", __func__, __LINE__); \ - } while (0) - -#define ATH5K_DBG(_sc, _m, _fmt, ...) do { \ - if (unlikely((_sc)->debug.level & (_m) && net_ratelimit())) \ - ATH5K_PRINTK(_sc, KERN_DEBUG, "(%s:%d): " _fmt, \ - __func__, __LINE__, ##__VA_ARGS__); \ - } while (0) - -#define ATH5K_DBG_UNLIMIT(_sc, _m, _fmt, ...) do { \ - if (unlikely((_sc)->debug.level & (_m))) \ - ATH5K_PRINTK(_sc, KERN_DEBUG, "(%s:%d): " _fmt, \ - __func__, __LINE__, ##__VA_ARGS__); \ - } while (0) - -void -ath5k_debug_init(void); - -void -ath5k_debug_init_device(struct ath5k_softc *sc); - -void -ath5k_debug_finish(void); - -void -ath5k_debug_finish_device(struct ath5k_softc *sc); - -void -ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah); - -void -ath5k_debug_dump_bands(struct ath5k_softc *sc); - -void -ath5k_debug_dump_skb(struct ath5k_softc *sc, - struct sk_buff *skb, const char *prefix, int tx); - -void -ath5k_debug_printtxbuf(struct ath5k_softc *sc, struct ath5k_buf *bf); - -#else /* no debugging */ - -#include <linux/compiler.h> - -#define ATH5K_TRACE(_sc) typecheck(struct ath5k_softc *, (_sc)) - -static inline void __attribute__ ((format (printf, 3, 4))) -ATH5K_DBG(struct ath5k_softc *sc, unsigned int m, const char *fmt, ...) {} - -static inline void __attribute__ ((format (printf, 3, 4))) -ATH5K_DBG_UNLIMIT(struct ath5k_softc *sc, unsigned int m, const char *fmt, ...) -{} - -static inline void -ath5k_debug_init(void) {} - -static inline void -ath5k_debug_init_device(struct ath5k_softc *sc) {} - -static inline void -ath5k_debug_finish(void) {} - -static inline void -ath5k_debug_finish_device(struct ath5k_softc *sc) {} - -static inline void -ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah) {} - -static inline void -ath5k_debug_dump_bands(struct ath5k_softc *sc) {} - -static inline void -ath5k_debug_dump_skb(struct ath5k_softc *sc, - struct sk_buff *skb, const char *prefix, int tx) {} - -static inline void -ath5k_debug_printtxbuf(struct ath5k_softc *sc, struct ath5k_buf *bf) {} - -#endif /* ifdef CONFIG_ATH5K_DEBUG */ - -#endif /* ifndef _ATH5K_DEBUG_H */ diff --git a/drivers/net/wireless/ath5k/desc.c b/drivers/net/wireless/ath5k/desc.c deleted file mode 100644 index b40a9287a39..00000000000 --- a/drivers/net/wireless/ath5k/desc.c +++ /dev/null @@ -1,692 +0,0 @@ -/* - * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -/******************************\ - Hardware Descriptor Functions -\******************************/ - -#include "ath5k.h" -#include "reg.h" -#include "debug.h" -#include "base.h" - -/* - * TX Descriptors - */ - -/* - * Initialize the 2-word tx control descriptor on 5210/5211 - */ -static int -ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type, - unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0, - unsigned int key_index, unsigned int antenna_mode, unsigned int flags, - unsigned int rtscts_rate, unsigned int rtscts_duration) -{ - u32 frame_type; - struct ath5k_hw_2w_tx_ctl *tx_ctl; - unsigned int frame_len; - - tx_ctl = &desc->ud.ds_tx5210.tx_ctl; - - /* - * Validate input - * - Zero retries don't make sense. - * - A zero rate will put the HW into a mode where it continously sends - * noise on the channel, so it is important to avoid this. - */ - if (unlikely(tx_tries0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero retries\n"); - WARN_ON(1); - return -EINVAL; - } - if (unlikely(tx_rate0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero rate\n"); - WARN_ON(1); - return -EINVAL; - } - - /* Clear descriptor */ - memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc)); - - /* Setup control descriptor */ - - /* Verify and set frame length */ - - /* remove padding we might have added before */ - frame_len = pkt_len - ath5k_pad_size(hdr_len) + FCS_LEN; - - if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN) - return -EINVAL; - - tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN; - - /* Verify and set buffer length */ - - /* NB: beacon's BufLen must be a multiple of 4 bytes */ - if (type == AR5K_PKT_TYPE_BEACON) - pkt_len = roundup(pkt_len, 4); - - if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN) - return -EINVAL; - - tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN; - - /* - * Verify and set header length - * XXX: I only found that on 5210 code, does it work on 5211 ? - */ - if (ah->ah_version == AR5K_AR5210) { - if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN) - return -EINVAL; - tx_ctl->tx_control_0 |= - AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN); - } - - /*Diferences between 5210-5211*/ - if (ah->ah_version == AR5K_AR5210) { - switch (type) { - case AR5K_PKT_TYPE_BEACON: - case AR5K_PKT_TYPE_PROBE_RESP: - frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY; - case AR5K_PKT_TYPE_PIFS: - frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS; - default: - frame_type = type /*<< 2 ?*/; - } - - tx_ctl->tx_control_0 |= - AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) | - AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE); - - } else { - tx_ctl->tx_control_0 |= - AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) | - AR5K_REG_SM(antenna_mode, - AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT); - tx_ctl->tx_control_1 |= - AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE); - } -#define _TX_FLAGS(_c, _flag) \ - if (flags & AR5K_TXDESC_##_flag) { \ - tx_ctl->tx_control_##_c |= \ - AR5K_2W_TX_DESC_CTL##_c##_##_flag; \ - } - - _TX_FLAGS(0, CLRDMASK); - _TX_FLAGS(0, VEOL); - _TX_FLAGS(0, INTREQ); - _TX_FLAGS(0, RTSENA); - _TX_FLAGS(1, NOACK); - -#undef _TX_FLAGS - - /* - * WEP crap - */ - if (key_index != AR5K_TXKEYIX_INVALID) { - tx_ctl->tx_control_0 |= - AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; - tx_ctl->tx_control_1 |= - AR5K_REG_SM(key_index, - AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); - } - - /* - * RTS/CTS Duration [5210 ?] - */ - if ((ah->ah_version == AR5K_AR5210) && - (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA))) - tx_ctl->tx_control_1 |= rtscts_duration & - AR5K_2W_TX_DESC_CTL1_RTS_DURATION; - - return 0; -} - -/* - * Initialize the 4-word tx control descriptor on 5212 - */ -static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, - struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len, - enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0, - unsigned int tx_tries0, unsigned int key_index, - unsigned int antenna_mode, unsigned int flags, - unsigned int rtscts_rate, - unsigned int rtscts_duration) -{ - struct ath5k_hw_4w_tx_ctl *tx_ctl; - unsigned int frame_len; - - ATH5K_TRACE(ah->ah_sc); - tx_ctl = &desc->ud.ds_tx5212.tx_ctl; - - /* - * Validate input - * - Zero retries don't make sense. - * - A zero rate will put the HW into a mode where it continously sends - * noise on the channel, so it is important to avoid this. - */ - if (unlikely(tx_tries0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero retries\n"); - WARN_ON(1); - return -EINVAL; - } - if (unlikely(tx_rate0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero rate\n"); - WARN_ON(1); - return -EINVAL; - } - - /* Clear descriptor */ - memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc)); - - /* Setup control descriptor */ - - /* Verify and set frame length */ - - /* remove padding we might have added before */ - frame_len = pkt_len - ath5k_pad_size(hdr_len) + FCS_LEN; - - if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN) - return -EINVAL; - - tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN; - - /* Verify and set buffer length */ - - /* NB: beacon's BufLen must be a multiple of 4 bytes */ - if (type == AR5K_PKT_TYPE_BEACON) - pkt_len = roundup(pkt_len, 4); - - if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN) - return -EINVAL; - - tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN; - - tx_ctl->tx_control_0 |= - AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) | - AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT); - tx_ctl->tx_control_1 |= AR5K_REG_SM(type, - AR5K_4W_TX_DESC_CTL1_FRAME_TYPE); - tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0); - tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; - -#define _TX_FLAGS(_c, _flag) \ - if (flags & AR5K_TXDESC_##_flag) { \ - tx_ctl->tx_control_##_c |= \ - AR5K_4W_TX_DESC_CTL##_c##_##_flag; \ - } - - _TX_FLAGS(0, CLRDMASK); - _TX_FLAGS(0, VEOL); - _TX_FLAGS(0, INTREQ); - _TX_FLAGS(0, RTSENA); - _TX_FLAGS(0, CTSENA); - _TX_FLAGS(1, NOACK); - -#undef _TX_FLAGS - - /* - * WEP crap - */ - if (key_index != AR5K_TXKEYIX_INVALID) { - tx_ctl->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; - tx_ctl->tx_control_1 |= AR5K_REG_SM(key_index, - AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); - } - - /* - * RTS/CTS - */ - if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) { - if ((flags & AR5K_TXDESC_RTSENA) && - (flags & AR5K_TXDESC_CTSENA)) - return -EINVAL; - tx_ctl->tx_control_2 |= rtscts_duration & - AR5K_4W_TX_DESC_CTL2_RTS_DURATION; - tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate, - AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE); - } - - return 0; -} - -/* - * Initialize a 4-word multi rate retry tx control descriptor on 5212 - */ -static int -ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, - u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3) -{ - struct ath5k_hw_4w_tx_ctl *tx_ctl; - - /* - * Rates can be 0 as long as the retry count is 0 too. - * A zero rate and nonzero retry count will put the HW into a mode where - * it continously sends noise on the channel, so it is important to - * avoid this. - */ - if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) || - (tx_rate2 == 0 && tx_tries2 != 0) || - (tx_rate3 == 0 && tx_tries3 != 0))) { - ATH5K_ERR(ah->ah_sc, "zero rate\n"); - WARN_ON(1); - return -EINVAL; - } - - if (ah->ah_version == AR5K_AR5212) { - tx_ctl = &desc->ud.ds_tx5212.tx_ctl; - -#define _XTX_TRIES(_n) \ - if (tx_tries##_n) { \ - tx_ctl->tx_control_2 |= \ - AR5K_REG_SM(tx_tries##_n, \ - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n); \ - tx_ctl->tx_control_3 |= \ - AR5K_REG_SM(tx_rate##_n, \ - AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n); \ - } - - _XTX_TRIES(1); - _XTX_TRIES(2); - _XTX_TRIES(3); - -#undef _XTX_TRIES - - return 1; - } - - return 0; -} - -/* no mrr support for cards older than 5212 */ -static int -ath5k_hw_setup_no_mrr(struct ath5k_hw *ah, struct ath5k_desc *desc, - unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, - u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3) -{ - return 0; -} - -/* - * Proccess the tx status descriptor on 5210/5211 - */ -static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_tx_status *ts) -{ - struct ath5k_hw_2w_tx_ctl *tx_ctl; - struct ath5k_hw_tx_status *tx_status; - - ATH5K_TRACE(ah->ah_sc); - - tx_ctl = &desc->ud.ds_tx5210.tx_ctl; - tx_status = &desc->ud.ds_tx5210.tx_stat; - - /* No frame has been send or error */ - if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0)) - return -EINPROGRESS; - - /* - * Get descriptor status - */ - ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); - ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); - ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); - /*TODO: ts->ts_virtcol + test*/ - ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_SEQ_NUM); - ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); - ts->ts_antenna = 1; - ts->ts_status = 0; - ts->ts_rate[0] = AR5K_REG_MS(tx_ctl->tx_control_0, - AR5K_2W_TX_DESC_CTL0_XMIT_RATE); - ts->ts_retry[0] = ts->ts_longretry; - ts->ts_final_idx = 0; - - if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) { - if (tx_status->tx_status_0 & - AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) - ts->ts_status |= AR5K_TXERR_XRETRY; - - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) - ts->ts_status |= AR5K_TXERR_FIFO; - - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) - ts->ts_status |= AR5K_TXERR_FILT; - } - - return 0; -} - -/* - * Proccess a tx status descriptor on 5212 - */ -static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_tx_status *ts) -{ - struct ath5k_hw_4w_tx_ctl *tx_ctl; - struct ath5k_hw_tx_status *tx_status; - - ATH5K_TRACE(ah->ah_sc); - - tx_ctl = &desc->ud.ds_tx5212.tx_ctl; - tx_status = &desc->ud.ds_tx5212.tx_stat; - - /* No frame has been send or error */ - if (unlikely(!(tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE))) - return -EINPROGRESS; - - /* - * Get descriptor status - */ - ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); - ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); - ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); - ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_SEQ_NUM); - ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); - ts->ts_antenna = (tx_status->tx_status_1 & - AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1; - ts->ts_status = 0; - - ts->ts_final_idx = AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX); - - /* The longretry counter has the number of un-acked retries - * for the final rate. To get the total number of retries - * we have to add the retry counters for the other rates - * as well - */ - ts->ts_retry[ts->ts_final_idx] = ts->ts_longretry; - switch (ts->ts_final_idx) { - case 3: - ts->ts_rate[3] = AR5K_REG_MS(tx_ctl->tx_control_3, - AR5K_4W_TX_DESC_CTL3_XMIT_RATE3); - - ts->ts_retry[2] = AR5K_REG_MS(tx_ctl->tx_control_2, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2); - ts->ts_longretry += ts->ts_retry[2]; - /* fall through */ - case 2: - ts->ts_rate[2] = AR5K_REG_MS(tx_ctl->tx_control_3, - AR5K_4W_TX_DESC_CTL3_XMIT_RATE2); - - ts->ts_retry[1] = AR5K_REG_MS(tx_ctl->tx_control_2, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1); - ts->ts_longretry += ts->ts_retry[1]; - /* fall through */ - case 1: - ts->ts_rate[1] = AR5K_REG_MS(tx_ctl->tx_control_3, - AR5K_4W_TX_DESC_CTL3_XMIT_RATE1); - - ts->ts_retry[0] = AR5K_REG_MS(tx_ctl->tx_control_2, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1); - ts->ts_longretry += ts->ts_retry[0]; - /* fall through */ - case 0: - ts->ts_rate[0] = tx_ctl->tx_control_3 & - AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; - break; - } - - /* TX error */ - if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) { - if (tx_status->tx_status_0 & - AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) - ts->ts_status |= AR5K_TXERR_XRETRY; - - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) - ts->ts_status |= AR5K_TXERR_FIFO; - - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) - ts->ts_status |= AR5K_TXERR_FILT; - } - - return 0; -} - -/* - * RX Descriptors - */ - -/* - * Initialize an rx control descriptor - */ -static int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - u32 size, unsigned int flags) -{ - struct ath5k_hw_rx_ctl *rx_ctl; - - ATH5K_TRACE(ah->ah_sc); - rx_ctl = &desc->ud.ds_rx.rx_ctl; - - /* - * Clear the descriptor - * If we don't clean the status descriptor, - * while scanning we get too many results, - * most of them virtual, after some secs - * of scanning system hangs. M.F. - */ - memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc)); - - /* Setup descriptor */ - rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN; - if (unlikely(rx_ctl->rx_control_1 != size)) - return -EINVAL; - - if (flags & AR5K_RXDESC_INTREQ) - rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ; - - return 0; -} - -/* - * Proccess the rx status descriptor on 5210/5211 - */ -static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_rx_status *rs) -{ - struct ath5k_hw_rx_status *rx_status; - - rx_status = &desc->ud.ds_rx.u.rx_stat; - - /* No frame received / not ready */ - if (unlikely(!(rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_DONE))) - return -EINPROGRESS; - - /* - * Frame receive status - */ - rs->rs_datalen = rx_status->rx_status_0 & - AR5K_5210_RX_DESC_STATUS0_DATA_LEN; - rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL); - rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE); - rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA); - rs->rs_more = !!(rx_status->rx_status_0 & - AR5K_5210_RX_DESC_STATUS0_MORE); - /* TODO: this timestamp is 13 bit, later on we assume 15 bit */ - rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); - rs->rs_status = 0; - rs->rs_phyerr = 0; - - /* - * Key table status - */ - if (rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID) - rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5210_RX_DESC_STATUS1_KEY_INDEX); - else - rs->rs_keyix = AR5K_RXKEYIX_INVALID; - - /* - * Receive/descriptor errors - */ - if (!(rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) { - if (rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_CRC_ERROR) - rs->rs_status |= AR5K_RXERR_CRC; - - if (rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN) - rs->rs_status |= AR5K_RXERR_FIFO; - - if (rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) { - rs->rs_status |= AR5K_RXERR_PHY; - rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5210_RX_DESC_STATUS1_PHY_ERROR); - } - - if (rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) - rs->rs_status |= AR5K_RXERR_DECRYPT; - } - - return 0; -} - -/* - * Proccess the rx status descriptor on 5212 - */ -static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_rx_status *rs) -{ - struct ath5k_hw_rx_status *rx_status; - struct ath5k_hw_rx_error *rx_err; - - ATH5K_TRACE(ah->ah_sc); - rx_status = &desc->ud.ds_rx.u.rx_stat; - - /* Overlay on error */ - rx_err = &desc->ud.ds_rx.u.rx_err; - - /* No frame received / not ready */ - if (unlikely(!(rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_DONE))) - return -EINPROGRESS; - - /* - * Frame receive status - */ - rs->rs_datalen = rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_DATA_LEN; - rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL); - rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE); - rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA); - rs->rs_more = !!(rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_MORE); - rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); - rs->rs_status = 0; - rs->rs_phyerr = 0; - - /* - * Key table status - */ - if (rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID) - rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5212_RX_DESC_STATUS1_KEY_INDEX); - else - rs->rs_keyix = AR5K_RXKEYIX_INVALID; - - /* - * Receive/descriptor errors - */ - if (!(rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) { - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_CRC_ERROR) - rs->rs_status |= AR5K_RXERR_CRC; - - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) { - rs->rs_status |= AR5K_RXERR_PHY; - rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1, - AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE); - } - - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) - rs->rs_status |= AR5K_RXERR_DECRYPT; - - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_MIC_ERROR) - rs->rs_status |= AR5K_RXERR_MIC; - } - - return 0; -} - -/* - * Init function pointers inside ath5k_hw struct - */ -int ath5k_hw_init_desc_functions(struct ath5k_hw *ah) -{ - - if (ah->ah_version != AR5K_AR5210 && - ah->ah_version != AR5K_AR5211 && - ah->ah_version != AR5K_AR5212) - return -ENOTSUPP; - - /* XXX: What is this magic value and where is it used ? */ - if (ah->ah_version == AR5K_AR5212) - ah->ah_magic = AR5K_EEPROM_MAGIC_5212; - else if (ah->ah_version == AR5K_AR5211) - ah->ah_magic = AR5K_EEPROM_MAGIC_5211; - - if (ah->ah_version == AR5K_AR5212) { - ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc; - ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc; - ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_mrr_tx_desc; - ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status; - } else { - ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc; - ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc; - ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_no_mrr; - ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status; - } - - if (ah->ah_version == AR5K_AR5212) - ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status; - else if (ah->ah_version <= AR5K_AR5211) - ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status; - - return 0; -} - diff --git a/drivers/net/wireless/ath5k/desc.h b/drivers/net/wireless/ath5k/desc.h deleted file mode 100644 index 56158c804e3..00000000000 --- a/drivers/net/wireless/ath5k/desc.h +++ /dev/null @@ -1,332 +0,0 @@ -/* - * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -/* - * Internal RX/TX descriptor structures - * (rX: reserved fields possibily used by future versions of the ar5k chipset) - */ - -/* - * common hardware RX control descriptor - */ -struct ath5k_hw_rx_ctl { - u32 rx_control_0; /* RX control word 0 */ - u32 rx_control_1; /* RX control word 1 */ -} __packed; - -/* RX control word 0 field/sflags */ -#define AR5K_DESC_RX_CTL0 0x00000000 - -/* RX control word 1 fields/flags */ -#define AR5K_DESC_RX_CTL1_BUF_LEN 0x00000fff -#define AR5K_DESC_RX_CTL1_INTREQ 0x00002000 - -/* - * common hardware RX status descriptor - * 5210/11 and 5212 differ only in the flags defined below - */ -struct ath5k_hw_rx_status { - u32 rx_status_0; /* RX status word 0 */ - u32 rx_status_1; /* RX status word 1 */ -} __packed; - -/* 5210/5211 */ -/* RX status word 0 fields/flags */ -#define AR5K_5210_RX_DESC_STATUS0_DATA_LEN 0x00000fff -#define AR5K_5210_RX_DESC_STATUS0_MORE 0x00001000 -#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE 0x00078000 -#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE_S 15 -#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL 0x07f80000 -#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 19 -#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA 0x38000000 -#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 27 - -/* RX status word 1 fields/flags */ -#define AR5K_5210_RX_DESC_STATUS1_DONE 0x00000001 -#define AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 -#define AR5K_5210_RX_DESC_STATUS1_CRC_ERROR 0x00000004 -#define AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN 0x00000008 -#define AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000010 -#define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR 0x000000e0 -#define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR_S 5 -#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID 0x00000100 -#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX 0x00007e00 -#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_S 9 -#define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP 0x0fff8000 -#define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S 15 -#define AR5K_5210_RX_DESC_STATUS1_KEY_CACHE_MISS 0x10000000 - -/* 5212 */ -/* RX status word 0 fields/flags */ -#define AR5K_5212_RX_DESC_STATUS0_DATA_LEN 0x00000fff -#define AR5K_5212_RX_DESC_STATUS0_MORE 0x00001000 -#define AR5K_5212_RX_DESC_STATUS0_DECOMP_CRC_ERROR 0x00002000 -#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE 0x000f8000 -#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE_S 15 -#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL 0x0ff00000 -#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 20 -#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA 0xf0000000 -#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 28 - -/* RX status word 1 fields/flags */ -#define AR5K_5212_RX_DESC_STATUS1_DONE 0x00000001 -#define AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 -#define AR5K_5212_RX_DESC_STATUS1_CRC_ERROR 0x00000004 -#define AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000008 -#define AR5K_5212_RX_DESC_STATUS1_PHY_ERROR 0x00000010 -#define AR5K_5212_RX_DESC_STATUS1_MIC_ERROR 0x00000020 -#define AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID 0x00000100 -#define AR5K_5212_RX_DESC_STATUS1_KEY_INDEX 0x0000fe00 -#define AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_S 9 -#define AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP 0x7fff0000 -#define AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S 16 -#define AR5K_5212_RX_DESC_STATUS1_KEY_CACHE_MISS 0x80000000 - -/* - * common hardware RX error descriptor - */ -struct ath5k_hw_rx_error { - u32 rx_error_0; /* RX status word 0 */ - u32 rx_error_1; /* RX status word 1 */ -} __packed; - -/* RX error word 0 fields/flags */ -#define AR5K_RX_DESC_ERROR0 0x00000000 - -/* RX error word 1 fields/flags */ -#define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE 0x0000ff00 -#define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE_S 8 - -/* PHY Error codes */ -#define AR5K_DESC_RX_PHY_ERROR_NONE 0x00 -#define AR5K_DESC_RX_PHY_ERROR_TIMING 0x20 -#define AR5K_DESC_RX_PHY_ERROR_PARITY 0x40 -#define AR5K_DESC_RX_PHY_ERROR_RATE 0x60 -#define AR5K_DESC_RX_PHY_ERROR_LENGTH 0x80 -#define AR5K_DESC_RX_PHY_ERROR_64QAM 0xa0 -#define AR5K_DESC_RX_PHY_ERROR_SERVICE 0xc0 -#define AR5K_DESC_RX_PHY_ERROR_TRANSMITOVR 0xe0 - -/* - * 5210/5211 hardware 2-word TX control descriptor - */ -struct ath5k_hw_2w_tx_ctl { - u32 tx_control_0; /* TX control word 0 */ - u32 tx_control_1; /* TX control word 1 */ -} __packed; - -/* TX control word 0 fields/flags */ -#define AR5K_2W_TX_DESC_CTL0_FRAME_LEN 0x00000fff -#define AR5K_2W_TX_DESC_CTL0_HEADER_LEN 0x0003f000 /*[5210 ?]*/ -#define AR5K_2W_TX_DESC_CTL0_HEADER_LEN_S 12 -#define AR5K_2W_TX_DESC_CTL0_XMIT_RATE 0x003c0000 -#define AR5K_2W_TX_DESC_CTL0_XMIT_RATE_S 18 -#define AR5K_2W_TX_DESC_CTL0_RTSENA 0x00400000 -#define AR5K_2W_TX_DESC_CTL0_CLRDMASK 0x01000000 -#define AR5K_2W_TX_DESC_CTL0_LONG_PACKET 0x00800000 /*[5210]*/ -#define AR5K_2W_TX_DESC_CTL0_VEOL 0x00800000 /*[5211]*/ -#define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE 0x1c000000 /*[5210]*/ -#define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE_S 26 -#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 0x02000000 -#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211 0x1e000000 - -#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT \ - (ah->ah_version == AR5K_AR5210 ? \ - AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 : \ - AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211) - -#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_S 25 -#define AR5K_2W_TX_DESC_CTL0_INTREQ 0x20000000 -#define AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID 0x40000000 - -/* TX control word 1 fields/flags */ -#define AR5K_2W_TX_DESC_CTL1_BUF_LEN 0x00000fff -#define AR5K_2W_TX_DESC_CTL1_MORE 0x00001000 -#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 0x0007e000 -#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211 0x000fe000 - -#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX \ - (ah->ah_version == AR5K_AR5210 ? \ - AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 : \ - AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211) - -#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_S 13 -#define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE 0x00700000 /*[5211]*/ -#define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE_S 20 -#define AR5K_2W_TX_DESC_CTL1_NOACK 0x00800000 /*[5211]*/ -#define AR5K_2W_TX_DESC_CTL1_RTS_DURATION 0xfff80000 /*[5210 ?]*/ - -/* Frame types */ -#define AR5K_AR5210_TX_DESC_FRAME_TYPE_NORMAL 0x00 -#define AR5K_AR5210_TX_DESC_FRAME_TYPE_ATIM 0x04 -#define AR5K_AR5210_TX_DESC_FRAME_TYPE_PSPOLL 0x08 -#define AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY 0x0c -#define AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS 0x10 - -/* - * 5212 hardware 4-word TX control descriptor - */ -struct ath5k_hw_4w_tx_ctl { - u32 tx_control_0; /* TX control word 0 */ - -#define AR5K_4W_TX_DESC_CTL0_FRAME_LEN 0x00000fff -#define AR5K_4W_TX_DESC_CTL0_XMIT_POWER 0x003f0000 -#define AR5K_4W_TX_DESC_CTL0_XMIT_POWER_S 16 -#define AR5K_4W_TX_DESC_CTL0_RTSENA 0x00400000 -#define AR5K_4W_TX_DESC_CTL0_VEOL 0x00800000 -#define AR5K_4W_TX_DESC_CTL0_CLRDMASK 0x01000000 -#define AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT 0x1e000000 -#define AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT_S 25 -#define AR5K_4W_TX_DESC_CTL0_INTREQ 0x20000000 -#define AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID 0x40000000 -#define AR5K_4W_TX_DESC_CTL0_CTSENA 0x80000000 - - u32 tx_control_1; /* TX control word 1 */ - -#define AR5K_4W_TX_DESC_CTL1_BUF_LEN 0x00000fff -#define AR5K_4W_TX_DESC_CTL1_MORE 0x00001000 -#define AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX 0x000fe000 -#define AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_S 13 -#define AR5K_4W_TX_DESC_CTL1_FRAME_TYPE 0x00f00000 -#define AR5K_4W_TX_DESC_CTL1_FRAME_TYPE_S 20 -#define AR5K_4W_TX_DESC_CTL1_NOACK 0x01000000 -#define AR5K_4W_TX_DESC_CTL1_COMP_PROC 0x06000000 -#define AR5K_4W_TX_DESC_CTL1_COMP_PROC_S 25 -#define AR5K_4W_TX_DESC_CTL1_COMP_IV_LEN 0x18000000 -#define AR5K_4W_TX_DESC_CTL1_COMP_IV_LEN_S 27 -#define AR5K_4W_TX_DESC_CTL1_COMP_ICV_LEN 0x60000000 -#define AR5K_4W_TX_DESC_CTL1_COMP_ICV_LEN_S 29 - - u32 tx_control_2; /* TX control word 2 */ - -#define AR5K_4W_TX_DESC_CTL2_RTS_DURATION 0x00007fff -#define AR5K_4W_TX_DESC_CTL2_DURATION_UPDATE_ENABLE 0x00008000 -#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0 0x000f0000 -#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0_S 16 -#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1 0x00f00000 -#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1_S 20 -#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2 0x0f000000 -#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2_S 24 -#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3 0xf0000000 -#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3_S 28 - - u32 tx_control_3; /* TX control word 3 */ - -#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE0 0x0000001f -#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE1 0x000003e0 -#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE1_S 5 -#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE2 0x00007c00 -#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE2_S 10 -#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE3 0x000f8000 -#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE3_S 15 -#define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE 0x01f00000 -#define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE_S 20 -} __packed; - -/* - * Common TX status descriptor - */ -struct ath5k_hw_tx_status { - u32 tx_status_0; /* TX status word 0 */ - u32 tx_status_1; /* TX status word 1 */ -} __packed; - -/* TX status word 0 fields/flags */ -#define AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK 0x00000001 -#define AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES 0x00000002 -#define AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN 0x00000004 -#define AR5K_DESC_TX_STATUS0_FILTERED 0x00000008 -/*??? -#define AR5K_DESC_TX_STATUS0_RTS_FAIL_COUNT 0x000000f0 -#define AR5K_DESC_TX_STATUS0_RTS_FAIL_COUNT_S 4 -*/ -#define AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT 0x000000f0 -#define AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT_S 4 -/*??? -#define AR5K_DESC_TX_STATUS0_DATA_FAIL_COUNT 0x00000f00 -#define AR5K_DESC_TX_STATUS0_DATA_FAIL_COUNT_S 8 -*/ -#define AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT 0x00000f00 -#define AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT_S 8 -#define AR5K_DESC_TX_STATUS0_VIRT_COLL_COUNT 0x0000f000 -#define AR5K_DESC_TX_STATUS0_VIRT_COLL_COUNT_S 12 -#define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP 0xffff0000 -#define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP_S 16 - -/* TX status word 1 fields/flags */ -#define AR5K_DESC_TX_STATUS1_DONE 0x00000001 -#define AR5K_DESC_TX_STATUS1_SEQ_NUM 0x00001ffe -#define AR5K_DESC_TX_STATUS1_SEQ_NUM_S 1 -#define AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH 0x001fe000 -#define AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH_S 13 -#define AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX 0x00600000 -#define AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX_S 21 -#define AR5K_DESC_TX_STATUS1_COMP_SUCCESS 0x00800000 -#define AR5K_DESC_TX_STATUS1_XMIT_ANTENNA 0x01000000 - -/* - * 5210/5211 hardware TX descriptor - */ -struct ath5k_hw_5210_tx_desc { - struct ath5k_hw_2w_tx_ctl tx_ctl; - struct ath5k_hw_tx_status tx_stat; -} __packed; - -/* - * 5212 hardware TX descriptor - */ -struct ath5k_hw_5212_tx_desc { - struct ath5k_hw_4w_tx_ctl tx_ctl; - struct ath5k_hw_tx_status tx_stat; -} __packed; - -/* - * common hardware RX descriptor - */ -struct ath5k_hw_all_rx_desc { - struct ath5k_hw_rx_ctl rx_ctl; - union { - struct ath5k_hw_rx_status rx_stat; - struct ath5k_hw_rx_error rx_err; - } u; -} __packed; - -/* - * Atheros hardware descriptor - * This is read and written to by the hardware - */ -struct ath5k_desc { - u32 ds_link; /* physical address of the next descriptor */ - u32 ds_data; /* physical address of data buffer (skb) */ - - union { - struct ath5k_hw_5210_tx_desc ds_tx5210; - struct ath5k_hw_5212_tx_desc ds_tx5212; - struct ath5k_hw_all_rx_desc ds_rx; - } ud; -} __packed; - -#define AR5K_RXDESC_INTREQ 0x0020 - -#define AR5K_TXDESC_CLRDMASK 0x0001 -#define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/ -#define AR5K_TXDESC_RTSENA 0x0004 -#define AR5K_TXDESC_CTSENA 0x0008 -#define AR5K_TXDESC_INTREQ 0x0010 -#define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/ - diff --git a/drivers/net/wireless/ath5k/dma.c b/drivers/net/wireless/ath5k/dma.c deleted file mode 100644 index b65b4feb2d2..00000000000 --- a/drivers/net/wireless/ath5k/dma.c +++ /dev/null @@ -1,705 +0,0 @@ -/* - * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -/*************************************\ -* DMA and interrupt masking functions * -\*************************************/ - -/* - * dma.c - DMA and interrupt masking functions - * - * Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and - * handle queue setup for 5210 chipset (rest are handled on qcu.c). - * Also we setup interrupt mask register (IMR) and read the various iterrupt - * status registers (ISR). - * - * TODO: Handle SISR on 5211+ and introduce a function to return the queue - * number that resulted the interrupt. - */ - -#include "ath5k.h" -#include "reg.h" -#include "debug.h" -#include "base.h" - -/*********\ -* Receive * -\*********/ - -/** - * ath5k_hw_start_rx_dma - Start DMA receive - * - * @ah: The &struct ath5k_hw - */ -void ath5k_hw_start_rx_dma(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR); - ath5k_hw_reg_read(ah, AR5K_CR); -} - -/** - * ath5k_hw_stop_rx_dma - Stop DMA receive - * - * @ah: The &struct ath5k_hw - */ -int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) -{ - unsigned int i; - - ATH5K_TRACE(ah->ah_sc); - ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR); - - /* - * It may take some time to disable the DMA receive unit - */ - for (i = 1000; i > 0 && - (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0; - i--) - udelay(10); - - return i ? 0 : -EBUSY; -} - -/** - * ath5k_hw_get_rxdp - Get RX Descriptor's address - * - * @ah: The &struct ath5k_hw - * - * XXX: Is RXDP read and clear ? - */ -u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah) -{ - return ath5k_hw_reg_read(ah, AR5K_RXDP); -} - -/** - * ath5k_hw_set_rxdp - Set RX Descriptor's address - * - * @ah: The &struct ath5k_hw - * @phys_addr: RX descriptor address - * - * XXX: Should we check if rx is enabled before setting rxdp ? - */ -void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr) -{ - ATH5K_TRACE(ah->ah_sc); - - ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP); -} - - -/**********\ -* Transmit * -\**********/ - -/** - * ath5k_hw_start_tx_dma - Start DMA transmit for a specific queue - * - * @ah: The &struct ath5k_hw - * @queue: The hw queue number - * - * Start DMA transmit for a specific queue and since 5210 doesn't have - * QCU/DCU, set up queue parameters for 5210 here based on queue type (one - * queue for normal data and one queue for beacons). For queue setup - * on newer chips check out qcu.c. Returns -EINVAL if queue number is out - * of range or if queue is already disabled. - * - * NOTE: Must be called after setting up tx control descriptor for that - * queue (see below). - */ -int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue) -{ - u32 tx_queue; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* Return if queue is declared inactive */ - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return -EIO; - - if (ah->ah_version == AR5K_AR5210) { - tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); - - /* - * Set the queue by type on 5210 - */ - switch (ah->ah_txq[queue].tqi_type) { - case AR5K_TX_QUEUE_DATA: - tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0; - break; - case AR5K_TX_QUEUE_BEACON: - tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; - ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, - AR5K_BSR); - break; - case AR5K_TX_QUEUE_CAB: - tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; - ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V | - AR5K_BCR_BDMAE, AR5K_BSR); - break; - default: - return -EINVAL; - } - /* Start queue */ - ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); - ath5k_hw_reg_read(ah, AR5K_CR); - } else { - /* Return if queue is disabled */ - if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue)) - return -EIO; - - /* Start queue */ - AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue); - } - - return 0; -} - -/** - * ath5k_hw_stop_tx_dma - Stop DMA transmit on a specific queue - * - * @ah: The &struct ath5k_hw - * @queue: The hw queue number - * - * Stop DMA transmit on a specific hw queue and drain queue so we don't - * have any pending frames. Returns -EBUSY if we still have pending frames, - * -EINVAL if queue number is out of range. - * - */ -int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) -{ - unsigned int i = 40; - u32 tx_queue, pending; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* Return if queue is declared inactive */ - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return -EIO; - - if (ah->ah_version == AR5K_AR5210) { - tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); - - /* - * Set by queue type - */ - switch (ah->ah_txq[queue].tqi_type) { - case AR5K_TX_QUEUE_DATA: - tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0; - break; - case AR5K_TX_QUEUE_BEACON: - case AR5K_TX_QUEUE_CAB: - /* XXX Fix me... */ - tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1; - ath5k_hw_reg_write(ah, 0, AR5K_BSR); - break; - default: - return -EINVAL; - } - - /* Stop queue */ - ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); - ath5k_hw_reg_read(ah, AR5K_CR); - } else { - /* - * Schedule TX disable and wait until queue is empty - */ - AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue); - - /*Check for pending frames*/ - do { - pending = ath5k_hw_reg_read(ah, - AR5K_QUEUE_STATUS(queue)) & - AR5K_QCU_STS_FRMPENDCNT; - udelay(100); - } while (--i && pending); - - /* For 2413+ order PCU to drop packets using - * QUIET mechanism */ - if (ah->ah_mac_version >= (AR5K_SREV_AR2414 >> 4) && - pending){ - /* Set periodicity and duration */ - ath5k_hw_reg_write(ah, - AR5K_REG_SM(100, AR5K_QUIET_CTL2_QT_PER)| - AR5K_REG_SM(10, AR5K_QUIET_CTL2_QT_DUR), - AR5K_QUIET_CTL2); - - /* Enable quiet period for current TSF */ - ath5k_hw_reg_write(ah, - AR5K_QUIET_CTL1_QT_EN | - AR5K_REG_SM(ath5k_hw_reg_read(ah, - AR5K_TSF_L32_5211) >> 10, - AR5K_QUIET_CTL1_NEXT_QT_TSF), - AR5K_QUIET_CTL1); - - /* Force channel idle high */ - AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211, - AR5K_DIAG_SW_CHANEL_IDLE_HIGH); - - /* Wait a while and disable mechanism */ - udelay(200); - AR5K_REG_DISABLE_BITS(ah, AR5K_QUIET_CTL1, - AR5K_QUIET_CTL1_QT_EN); - - /* Re-check for pending frames */ - i = 40; - do { - pending = ath5k_hw_reg_read(ah, - AR5K_QUEUE_STATUS(queue)) & - AR5K_QCU_STS_FRMPENDCNT; - udelay(100); - } while (--i && pending); - - AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5211, - AR5K_DIAG_SW_CHANEL_IDLE_HIGH); - } - - /* Clear register */ - ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD); - if (pending) - return -EBUSY; - } - - /* TODO: Check for success on 5210 else return error */ - return 0; -} - -/** - * ath5k_hw_get_txdp - Get TX Descriptor's address for a specific queue - * - * @ah: The &struct ath5k_hw - * @queue: The hw queue number - * - * Get TX descriptor's address for a specific queue. For 5210 we ignore - * the queue number and use tx queue type since we only have 2 queues. - * We use TXDP0 for normal data queue and TXDP1 for beacon queue. - * For newer chips with QCU/DCU we just read the corresponding TXDP register. - * - * XXX: Is TXDP read and clear ? - */ -u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue) -{ - u16 tx_reg; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* - * Get the transmit queue descriptor pointer from the selected queue - */ - /*5210 doesn't have QCU*/ - if (ah->ah_version == AR5K_AR5210) { - switch (ah->ah_txq[queue].tqi_type) { - case AR5K_TX_QUEUE_DATA: - tx_reg = AR5K_NOQCU_TXDP0; - break; - case AR5K_TX_QUEUE_BEACON: - case AR5K_TX_QUEUE_CAB: - tx_reg = AR5K_NOQCU_TXDP1; - break; - default: - return 0xffffffff; - } - } else { - tx_reg = AR5K_QUEUE_TXDP(queue); - } - - return ath5k_hw_reg_read(ah, tx_reg); -} - -/** - * ath5k_hw_set_txdp - Set TX Descriptor's address for a specific queue - * - * @ah: The &struct ath5k_hw - * @queue: The hw queue number - * - * Set TX descriptor's address for a specific queue. For 5210 we ignore - * the queue number and we use tx queue type since we only have 2 queues - * so as above we use TXDP0 for normal data queue and TXDP1 for beacon queue. - * For newer chips with QCU/DCU we just set the corresponding TXDP register. - * Returns -EINVAL if queue type is invalid for 5210 and -EIO if queue is still - * active. - */ -int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) -{ - u16 tx_reg; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* - * Set the transmit queue descriptor pointer register by type - * on 5210 - */ - if (ah->ah_version == AR5K_AR5210) { - switch (ah->ah_txq[queue].tqi_type) { - case AR5K_TX_QUEUE_DATA: - tx_reg = AR5K_NOQCU_TXDP0; - break; - case AR5K_TX_QUEUE_BEACON: - case AR5K_TX_QUEUE_CAB: - tx_reg = AR5K_NOQCU_TXDP1; - break; - default: - return -EINVAL; - } - } else { - /* - * Set the transmit queue descriptor pointer for - * the selected queue on QCU for 5211+ - * (this won't work if the queue is still active) - */ - if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) - return -EIO; - - tx_reg = AR5K_QUEUE_TXDP(queue); - } - - /* Set descriptor pointer */ - ath5k_hw_reg_write(ah, phys_addr, tx_reg); - - return 0; -} - -/** - * ath5k_hw_update_tx_triglevel - Update tx trigger level - * - * @ah: The &struct ath5k_hw - * @increase: Flag to force increase of trigger level - * - * This function increases/decreases the tx trigger level for the tx fifo - * buffer (aka FIFO threshold) that is used to indicate when PCU flushes - * the buffer and transmits it's data. Lowering this results sending small - * frames more quickly but can lead to tx underruns, raising it a lot can - * result other problems (i think bmiss is related). Right now we start with - * the lowest possible (64Bytes) and if we get tx underrun we increase it using - * the increase flag. Returns -EIO if we have have reached maximum/minimum. - * - * XXX: Link this with tx DMA size ? - * XXX: Use it to save interrupts ? - * TODO: Needs testing, i think it's related to bmiss... - */ -int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase) -{ - u32 trigger_level, imr; - int ret = -EIO; - - ATH5K_TRACE(ah->ah_sc); - - /* - * Disable interrupts by setting the mask - */ - imr = ath5k_hw_set_imr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL); - - trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG), - AR5K_TXCFG_TXFULL); - - if (!increase) { - if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES) - goto done; - } else - trigger_level += - ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2); - - /* - * Update trigger level on success - */ - if (ah->ah_version == AR5K_AR5210) - ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL); - else - AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_TXFULL, trigger_level); - - ret = 0; - -done: - /* - * Restore interrupt mask - */ - ath5k_hw_set_imr(ah, imr); - - return ret; -} - -/*******************\ -* Interrupt masking * -\*******************/ - -/** - * ath5k_hw_is_intr_pending - Check if we have pending interrupts - * - * @ah: The &struct ath5k_hw - * - * Check if we have pending interrupts to process. Returns 1 if we - * have pending interrupts and 0 if we haven't. - */ -bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - return ath5k_hw_reg_read(ah, AR5K_INTPEND) == 1 ? 1 : 0; -} - -/** - * ath5k_hw_get_isr - Get interrupt status - * - * @ah: The @struct ath5k_hw - * @interrupt_mask: Driver's interrupt mask used to filter out - * interrupts in sw. - * - * This function is used inside our interrupt handler to determine the reason - * for the interrupt by reading Primary Interrupt Status Register. Returns an - * abstract interrupt status mask which is mostly ISR with some uncommon bits - * being mapped on some standard non hw-specific positions - * (check out &ath5k_int). - * - * NOTE: We use read-and-clear register, so after this function is called ISR - * is zeroed. - */ -int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) -{ - u32 data; - - ATH5K_TRACE(ah->ah_sc); - - /* - * Read interrupt status from the Interrupt Status register - * on 5210 - */ - if (ah->ah_version == AR5K_AR5210) { - data = ath5k_hw_reg_read(ah, AR5K_ISR); - if (unlikely(data == AR5K_INT_NOCARD)) { - *interrupt_mask = data; - return -ENODEV; - } - } else { - /* - * Read interrupt status from Interrupt - * Status Register shadow copy (Read And Clear) - * - * Note: PISR/SISR Not available on 5210 - */ - data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR); - if (unlikely(data == AR5K_INT_NOCARD)) { - *interrupt_mask = data; - return -ENODEV; - } - } - - /* - * Get abstract interrupt mask (driver-compatible) - */ - *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr; - - if (ah->ah_version != AR5K_AR5210) { - u32 sisr2 = ath5k_hw_reg_read(ah, AR5K_RAC_SISR2); - - /*HIU = Host Interface Unit (PCI etc)*/ - if (unlikely(data & (AR5K_ISR_HIUERR))) - *interrupt_mask |= AR5K_INT_FATAL; - - /*Beacon Not Ready*/ - if (unlikely(data & (AR5K_ISR_BNR))) - *interrupt_mask |= AR5K_INT_BNR; - - if (unlikely(sisr2 & (AR5K_SISR2_SSERR | - AR5K_SISR2_DPERR | - AR5K_SISR2_MCABT))) - *interrupt_mask |= AR5K_INT_FATAL; - - if (data & AR5K_ISR_TIM) - *interrupt_mask |= AR5K_INT_TIM; - - if (data & AR5K_ISR_BCNMISC) { - if (sisr2 & AR5K_SISR2_TIM) - *interrupt_mask |= AR5K_INT_TIM; - if (sisr2 & AR5K_SISR2_DTIM) - *interrupt_mask |= AR5K_INT_DTIM; - if (sisr2 & AR5K_SISR2_DTIM_SYNC) - *interrupt_mask |= AR5K_INT_DTIM_SYNC; - if (sisr2 & AR5K_SISR2_BCN_TIMEOUT) - *interrupt_mask |= AR5K_INT_BCN_TIMEOUT; - if (sisr2 & AR5K_SISR2_CAB_TIMEOUT) - *interrupt_mask |= AR5K_INT_CAB_TIMEOUT; - } - - if (data & AR5K_ISR_RXDOPPLER) - *interrupt_mask |= AR5K_INT_RX_DOPPLER; - if (data & AR5K_ISR_QCBRORN) { - *interrupt_mask |= AR5K_INT_QCBRORN; - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR3), - AR5K_SISR3_QCBRORN); - } - if (data & AR5K_ISR_QCBRURN) { - *interrupt_mask |= AR5K_INT_QCBRURN; - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR3), - AR5K_SISR3_QCBRURN); - } - if (data & AR5K_ISR_QTRIG) { - *interrupt_mask |= AR5K_INT_QTRIG; - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR4), - AR5K_SISR4_QTRIG); - } - - if (data & AR5K_ISR_TXOK) - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR0), - AR5K_SISR0_QCU_TXOK); - - if (data & AR5K_ISR_TXDESC) - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR0), - AR5K_SISR0_QCU_TXDESC); - - if (data & AR5K_ISR_TXERR) - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR1), - AR5K_SISR1_QCU_TXERR); - - if (data & AR5K_ISR_TXEOL) - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR1), - AR5K_SISR1_QCU_TXEOL); - - if (data & AR5K_ISR_TXURN) - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR2), - AR5K_SISR2_QCU_TXURN); - } else { - if (unlikely(data & (AR5K_ISR_SSERR | AR5K_ISR_MCABT - | AR5K_ISR_HIUERR | AR5K_ISR_DPERR))) - *interrupt_mask |= AR5K_INT_FATAL; - - /* - * XXX: BMISS interrupts may occur after association. - * I found this on 5210 code but it needs testing. If this is - * true we should disable them before assoc and re-enable them - * after a successful assoc + some jiffies. - interrupt_mask &= ~AR5K_INT_BMISS; - */ - } - - /* - * In case we didn't handle anything, - * print the register value. - */ - if (unlikely(*interrupt_mask == 0 && net_ratelimit())) - ATH5K_PRINTF("ISR: 0x%08x IMR: 0x%08x\n", data, ah->ah_imr); - - return 0; -} - -/** - * ath5k_hw_set_imr - Set interrupt mask - * - * @ah: The &struct ath5k_hw - * @new_mask: The new interrupt mask to be set - * - * Set the interrupt mask in hw to save interrupts. We do that by mapping - * ath5k_int bits to hw-specific bits to remove abstraction and writing - * Interrupt Mask Register. - */ -enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) -{ - enum ath5k_int old_mask, int_mask; - - old_mask = ah->ah_imr; - - /* - * Disable card interrupts to prevent any race conditions - * (they will be re-enabled afterwards if AR5K_INT GLOBAL - * is set again on the new mask). - */ - if (old_mask & AR5K_INT_GLOBAL) { - ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER); - ath5k_hw_reg_read(ah, AR5K_IER); - } - - /* - * Add additional, chipset-dependent interrupt mask flags - * and write them to the IMR (interrupt mask register). - */ - int_mask = new_mask & AR5K_INT_COMMON; - - if (ah->ah_version != AR5K_AR5210) { - /* Preserve per queue TXURN interrupt mask */ - u32 simr2 = ath5k_hw_reg_read(ah, AR5K_SIMR2) - & AR5K_SIMR2_QCU_TXURN; - - if (new_mask & AR5K_INT_FATAL) { - int_mask |= AR5K_IMR_HIUERR; - simr2 |= (AR5K_SIMR2_MCABT | AR5K_SIMR2_SSERR - | AR5K_SIMR2_DPERR); - } - - /*Beacon Not Ready*/ - if (new_mask & AR5K_INT_BNR) - int_mask |= AR5K_INT_BNR; - - if (new_mask & AR5K_INT_TIM) - int_mask |= AR5K_IMR_TIM; - - if (new_mask & AR5K_INT_TIM) - simr2 |= AR5K_SISR2_TIM; - if (new_mask & AR5K_INT_DTIM) - simr2 |= AR5K_SISR2_DTIM; - if (new_mask & AR5K_INT_DTIM_SYNC) - simr2 |= AR5K_SISR2_DTIM_SYNC; - if (new_mask & AR5K_INT_BCN_TIMEOUT) - simr2 |= AR5K_SISR2_BCN_TIMEOUT; - if (new_mask & AR5K_INT_CAB_TIMEOUT) - simr2 |= AR5K_SISR2_CAB_TIMEOUT; - - if (new_mask & AR5K_INT_RX_DOPPLER) - int_mask |= AR5K_IMR_RXDOPPLER; - - /* Note: Per queue interrupt masks - * are set via reset_tx_queue (qcu.c) */ - ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR); - ath5k_hw_reg_write(ah, simr2, AR5K_SIMR2); - - } else { - if (new_mask & AR5K_INT_FATAL) - int_mask |= (AR5K_IMR_SSERR | AR5K_IMR_MCABT - | AR5K_IMR_HIUERR | AR5K_IMR_DPERR); - - ath5k_hw_reg_write(ah, int_mask, AR5K_IMR); - } - - /* If RXNOFRM interrupt is masked disable it - * by setting AR5K_RXNOFRM to zero */ - if (!(new_mask & AR5K_INT_RXNOFRM)) - ath5k_hw_reg_write(ah, 0, AR5K_RXNOFRM); - - /* Store new interrupt mask */ - ah->ah_imr = new_mask; - - /* ..re-enable interrupts if AR5K_INT_GLOBAL is set */ - if (new_mask & AR5K_INT_GLOBAL) { - ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER); - ath5k_hw_reg_read(ah, AR5K_IER); - } - - return old_mask; -} - diff --git a/drivers/net/wireless/ath5k/eeprom.c b/drivers/net/wireless/ath5k/eeprom.c deleted file mode 100644 index 1cb7edfae62..00000000000 --- a/drivers/net/wireless/ath5k/eeprom.c +++ /dev/null @@ -1,1366 +0,0 @@ -/* - * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -/*************************************\ -* EEPROM access functions and helpers * -\*************************************/ - -#include "ath5k.h" -#include "reg.h" -#include "debug.h" -#include "base.h" - -/* - * Read from eeprom - */ -static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data) -{ - u32 status, timeout; - - ATH5K_TRACE(ah->ah_sc); - /* - * Initialize EEPROM access - */ - if (ah->ah_version == AR5K_AR5210) { - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); - (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset)); - } else { - ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); - AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, - AR5K_EEPROM_CMD_READ); - } - - for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { - status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); - if (status & AR5K_EEPROM_STAT_RDDONE) { - if (status & AR5K_EEPROM_STAT_RDERR) - return -EIO; - *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) & - 0xffff); - return 0; - } - udelay(15); - } - - return -ETIMEDOUT; -} - -/* - * Translate binary channel representation in EEPROM to frequency - */ -static u16 ath5k_eeprom_bin2freq(struct ath5k_eeprom_info *ee, u16 bin, - unsigned int mode) -{ - u16 val; - - if (bin == AR5K_EEPROM_CHANNEL_DIS) - return bin; - - if (mode == AR5K_EEPROM_MODE_11A) { - if (ee->ee_version > AR5K_EEPROM_VERSION_3_2) - val = (5 * bin) + 4800; - else - val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 : - (bin * 10) + 5100; - } else { - if (ee->ee_version > AR5K_EEPROM_VERSION_3_2) - val = bin + 2300; - else - val = bin + 2400; - } - - return val; -} - -/* - * Initialize eeprom & capabilities structs - */ -static int -ath5k_eeprom_init_header(struct ath5k_hw *ah) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - int ret; - u16 val; - - /* Initial TX thermal adjustment values */ - ee->ee_tx_clip = 4; - ee->ee_pwd_84 = ee->ee_pwd_90 = 1; - ee->ee_gain_select = 1; - - /* - * Read values from EEPROM and store them in the capability structure - */ - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header); - - /* Return if we have an old EEPROM */ - if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0) - return 0; - -#ifdef notyet - /* - * Validate the checksum of the EEPROM date. There are some - * devices with invalid EEPROMs. - */ - for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) { - AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val); - cksum ^= val; - } - if (cksum != AR5K_EEPROM_INFO_CKSUM) { - ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum); - return -EIO; - } -#endif - - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version), - ee_ant_gain); - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1); - } - - if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) { - AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val); - ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7; - ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7; - - AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val); - ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7; - ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7; - } - - return 0; -} - - -/* - * Read antenna infos from eeprom - */ -static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset, - unsigned int mode) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 o = *offset; - u16 val; - int ret, i = 0; - - AR5K_EEPROM_READ(o++, val); - ee->ee_switch_settling[mode] = (val >> 8) & 0x7f; - ee->ee_atn_tx_rx[mode] = (val >> 2) & 0x3f; - ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; - ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; - ee->ee_ant_control[mode][i++] = val & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_ant_control[mode][i++] = (val >> 10) & 0x3f; - ee->ee_ant_control[mode][i++] = (val >> 4) & 0x3f; - ee->ee_ant_control[mode][i] = (val << 2) & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_ant_control[mode][i++] |= (val >> 14) & 0x3; - ee->ee_ant_control[mode][i++] = (val >> 8) & 0x3f; - ee->ee_ant_control[mode][i++] = (val >> 2) & 0x3f; - ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; - ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; - ee->ee_ant_control[mode][i++] = val & 0x3f; - - /* Get antenna modes */ - ah->ah_antenna[mode][0] = - (ee->ee_ant_control[mode][0] << 4) | 0x1; - ah->ah_antenna[mode][AR5K_ANT_FIXED_A] = - ee->ee_ant_control[mode][1] | - (ee->ee_ant_control[mode][2] << 6) | - (ee->ee_ant_control[mode][3] << 12) | - (ee->ee_ant_control[mode][4] << 18) | - (ee->ee_ant_control[mode][5] << 24); - ah->ah_antenna[mode][AR5K_ANT_FIXED_B] = - ee->ee_ant_control[mode][6] | - (ee->ee_ant_control[mode][7] << 6) | - (ee->ee_ant_control[mode][8] << 12) | - (ee->ee_ant_control[mode][9] << 18) | - (ee->ee_ant_control[mode][10] << 24); - - /* return new offset */ - *offset = o; - - return 0; -} - -/* - * Read supported modes from eeprom - */ -static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, - unsigned int mode) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 o = *offset; - u16 val; - int ret; - - ee->ee_n_piers[mode] = 0; - AR5K_EEPROM_READ(o++, val); - ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); - switch(mode) { - case AR5K_EEPROM_MODE_11A: - ee->ee_ob[mode][3] = (val >> 5) & 0x7; - ee->ee_db[mode][3] = (val >> 2) & 0x7; - ee->ee_ob[mode][2] = (val << 1) & 0x7; - - AR5K_EEPROM_READ(o++, val); - ee->ee_ob[mode][2] |= (val >> 15) & 0x1; - ee->ee_db[mode][2] = (val >> 12) & 0x7; - ee->ee_ob[mode][1] = (val >> 9) & 0x7; - ee->ee_db[mode][1] = (val >> 6) & 0x7; - ee->ee_ob[mode][0] = (val >> 3) & 0x7; - ee->ee_db[mode][0] = val & 0x7; - break; - case AR5K_EEPROM_MODE_11G: - case AR5K_EEPROM_MODE_11B: - ee->ee_ob[mode][1] = (val >> 4) & 0x7; - ee->ee_db[mode][1] = val & 0x7; - break; - } - - AR5K_EEPROM_READ(o++, val); - ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff; - ee->ee_thr_62[mode] = val & 0xff; - - if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) - ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28; - - AR5K_EEPROM_READ(o++, val); - ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff; - ee->ee_tx_frm2xpa_enable[mode] = val & 0xff; - - AR5K_EEPROM_READ(o++, val); - ee->ee_pga_desired_size[mode] = (val >> 8) & 0xff; - - if ((val & 0xff) & 0x80) - ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1); - else - ee->ee_noise_floor_thr[mode] = val & 0xff; - - if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) - ee->ee_noise_floor_thr[mode] = - mode == AR5K_EEPROM_MODE_11A ? -54 : -1; - - AR5K_EEPROM_READ(o++, val); - ee->ee_xlna_gain[mode] = (val >> 5) & 0xff; - ee->ee_x_gain[mode] = (val >> 1) & 0xf; - ee->ee_xpd[mode] = val & 0x1; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) - ee->ee_fixed_bias[mode] = (val >> 13) & 0x1; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) { - AR5K_EEPROM_READ(o++, val); - ee->ee_false_detect[mode] = (val >> 6) & 0x7f; - - if (mode == AR5K_EEPROM_MODE_11A) - ee->ee_xr_power[mode] = val & 0x3f; - else { - ee->ee_ob[mode][0] = val & 0x7; - ee->ee_db[mode][0] = (val >> 3) & 0x7; - } - } - - if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) { - ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN; - ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA; - } else { - ee->ee_i_gain[mode] = (val >> 13) & 0x7; - - AR5K_EEPROM_READ(o++, val); - ee->ee_i_gain[mode] |= (val << 3) & 0x38; - - if (mode == AR5K_EEPROM_MODE_11G) { - ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff; - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6) - ee->ee_scaled_cck_delta = (val >> 11) & 0x1f; - } - } - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 && - mode == AR5K_EEPROM_MODE_11A) { - ee->ee_i_cal[mode] = (val >> 8) & 0x3f; - ee->ee_q_cal[mode] = (val >> 3) & 0x1f; - } - - if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_0) - goto done; - - switch(mode) { - case AR5K_EEPROM_MODE_11A: - if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_1) - break; - - AR5K_EEPROM_READ(o++, val); - ee->ee_margin_tx_rx[mode] = val & 0x3f; - break; - case AR5K_EEPROM_MODE_11B: - AR5K_EEPROM_READ(o++, val); - - ee->ee_pwr_cal_b[0].freq = - ath5k_eeprom_bin2freq(ee, val & 0xff, mode); - if (ee->ee_pwr_cal_b[0].freq != AR5K_EEPROM_CHANNEL_DIS) - ee->ee_n_piers[mode]++; - - ee->ee_pwr_cal_b[1].freq = - ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode); - if (ee->ee_pwr_cal_b[1].freq != AR5K_EEPROM_CHANNEL_DIS) - ee->ee_n_piers[mode]++; - - AR5K_EEPROM_READ(o++, val); - ee->ee_pwr_cal_b[2].freq = - ath5k_eeprom_bin2freq(ee, val & 0xff, mode); - if (ee->ee_pwr_cal_b[2].freq != AR5K_EEPROM_CHANNEL_DIS) - ee->ee_n_piers[mode]++; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) - ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; - break; - case AR5K_EEPROM_MODE_11G: - AR5K_EEPROM_READ(o++, val); - - ee->ee_pwr_cal_g[0].freq = - ath5k_eeprom_bin2freq(ee, val & 0xff, mode); - if (ee->ee_pwr_cal_g[0].freq != AR5K_EEPROM_CHANNEL_DIS) - ee->ee_n_piers[mode]++; - - ee->ee_pwr_cal_g[1].freq = - ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode); - if (ee->ee_pwr_cal_g[1].freq != AR5K_EEPROM_CHANNEL_DIS) - ee->ee_n_piers[mode]++; - - AR5K_EEPROM_READ(o++, val); - ee->ee_turbo_max_power[mode] = val & 0x7f; - ee->ee_xr_power[mode] = (val >> 7) & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_pwr_cal_g[2].freq = - ath5k_eeprom_bin2freq(ee, val & 0xff, mode); - if (ee->ee_pwr_cal_g[2].freq != AR5K_EEPROM_CHANNEL_DIS) - ee->ee_n_piers[mode]++; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) - ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_i_cal[mode] = (val >> 8) & 0x3f; - ee->ee_q_cal[mode] = (val >> 3) & 0x1f; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) { - AR5K_EEPROM_READ(o++, val); - ee->ee_cck_ofdm_gain_delta = val & 0xff; - } - break; - } - -done: - /* return new offset */ - *offset = o; - - return 0; -} - -/* - * Read turbo mode information on newer EEPROM versions - */ -static int -ath5k_eeprom_read_turbo_modes(struct ath5k_hw *ah, - u32 *offset, unsigned int mode) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 o = *offset; - u16 val; - int ret; - - if (ee->ee_version < AR5K_EEPROM_VERSION_5_0) - return 0; - - switch (mode){ - case AR5K_EEPROM_MODE_11A: - ee->ee_switch_settling_turbo[mode] = (val >> 6) & 0x7f; - - ee->ee_atn_tx_rx_turbo[mode] = (val >> 13) & 0x7; - AR5K_EEPROM_READ(o++, val); - ee->ee_atn_tx_rx_turbo[mode] |= (val & 0x7) << 3; - ee->ee_margin_tx_rx_turbo[mode] = (val >> 3) & 0x3f; - - ee->ee_adc_desired_size_turbo[mode] = (val >> 9) & 0x7f; - AR5K_EEPROM_READ(o++, val); - ee->ee_adc_desired_size_turbo[mode] |= (val & 0x1) << 7; - ee->ee_pga_desired_size_turbo[mode] = (val >> 1) & 0xff; - - if (AR5K_EEPROM_EEMAP(ee->ee_misc0) >=2) - ee->ee_pd_gain_overlap = (val >> 9) & 0xf; - break; - case AR5K_EEPROM_MODE_11G: - ee->ee_switch_settling_turbo[mode] = (val >> 8) & 0x7f; - - ee->ee_atn_tx_rx_turbo[mode] = (val >> 15) & 0x7; - AR5K_EEPROM_READ(o++, val); - ee->ee_atn_tx_rx_turbo[mode] |= (val & 0x1f) << 1; - ee->ee_margin_tx_rx_turbo[mode] = (val >> 5) & 0x3f; - - ee->ee_adc_desired_size_turbo[mode] = (val >> 11) & 0x7f; - AR5K_EEPROM_READ(o++, val); - ee->ee_adc_desired_size_turbo[mode] |= (val & 0x7) << 5; - ee->ee_pga_desired_size_turbo[mode] = (val >> 3) & 0xff; - break; - } - - /* return new offset */ - *offset = o; - - return 0; -} - - -static int -ath5k_eeprom_init_modes(struct ath5k_hw *ah) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 mode_offset[3]; - unsigned int mode; - u32 offset; - int ret; - - /* - * Get values for all modes - */ - mode_offset[AR5K_EEPROM_MODE_11A] = AR5K_EEPROM_MODES_11A(ah->ah_ee_version); - mode_offset[AR5K_EEPROM_MODE_11B] = AR5K_EEPROM_MODES_11B(ah->ah_ee_version); - mode_offset[AR5K_EEPROM_MODE_11G] = AR5K_EEPROM_MODES_11G(ah->ah_ee_version); - - ee->ee_turbo_max_power[AR5K_EEPROM_MODE_11A] = - AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header); - - for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) { - offset = mode_offset[mode]; - - ret = ath5k_eeprom_read_ants(ah, &offset, mode); - if (ret) - return ret; - - ret = ath5k_eeprom_read_modes(ah, &offset, mode); - if (ret) - return ret; - - ret = ath5k_eeprom_read_turbo_modes(ah, &offset, mode); - if (ret) - return ret; - } - - /* override for older eeprom versions for better performance */ - if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) { - ee->ee_thr_62[AR5K_EEPROM_MODE_11A] = 15; - ee->ee_thr_62[AR5K_EEPROM_MODE_11B] = 28; - ee->ee_thr_62[AR5K_EEPROM_MODE_11G] = 28; - } - - return 0; -} - -static inline void -ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp) -{ - const static u16 intercepts3[] = - { 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 }; - const static u16 intercepts3_2[] = - { 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 }; - const u16 *ip; - int i; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_2) - ip = intercepts3_2; - else - ip = intercepts3; - - for (i = 0; i < ARRAY_SIZE(intercepts3); i++) - *vp++ = (ip[i] * max + (100 - ip[i]) * min) / 100; -} - -static inline int -ath5k_eeprom_read_freq_list(struct ath5k_hw *ah, int *offset, int max, - struct ath5k_chan_pcal_info *pc, u8 *count) -{ - int o = *offset; - int i = 0; - u8 f1, f2; - int ret; - u16 val; - - while(i < max) { - AR5K_EEPROM_READ(o++, val); - - f1 = (val >> 8) & 0xff; - f2 = val & 0xff; - - if (f1) - pc[i++].freq = f1; - - if (f2) - pc[i++].freq = f2; - - if (!f1 || !f2) - break; - } - *offset = o; - *count = i; - - return 0; -} - -static int -ath5k_eeprom_init_11a_pcal_freq(struct ath5k_hw *ah, int offset) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - struct ath5k_chan_pcal_info *pcal = ee->ee_pwr_cal_a; - int i, ret; - u16 val; - u8 mask; - - if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) { - ath5k_eeprom_read_freq_list(ah, &offset, - AR5K_EEPROM_N_5GHZ_CHAN, pcal, - &ee->ee_n_piers[AR5K_EEPROM_MODE_11A]); - } else { - mask = AR5K_EEPROM_FREQ_M(ah->ah_ee_version); - - AR5K_EEPROM_READ(offset++, val); - pcal[0].freq = (val >> 9) & mask; - pcal[1].freq = (val >> 2) & mask; - pcal[2].freq = (val << 5) & mask; - - AR5K_EEPROM_READ(offset++, val); - pcal[2].freq |= (val >> 11) & 0x1f; - pcal[3].freq = (val >> 4) & mask; - pcal[4].freq = (val << 3) & mask; - - AR5K_EEPROM_READ(offset++, val); - pcal[4].freq |= (val >> 13) & 0x7; - pcal[5].freq = (val >> 6) & mask; - pcal[6].freq = (val << 1) & mask; - - AR5K_EEPROM_READ(offset++, val); - pcal[6].freq |= (val >> 15) & 0x1; - pcal[7].freq = (val >> 8) & mask; - pcal[8].freq = (val >> 1) & mask; - pcal[9].freq = (val << 6) & mask; - - AR5K_EEPROM_READ(offset++, val); - pcal[9].freq |= (val >> 10) & 0x3f; - ee->ee_n_piers[AR5K_EEPROM_MODE_11A] = 10; - } - - for(i = 0; i < AR5K_EEPROM_N_5GHZ_CHAN; i += 1) { - pcal[i].freq = ath5k_eeprom_bin2freq(ee, - pcal[i].freq, AR5K_EEPROM_MODE_11A); - } - - return 0; -} - -static inline int -ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - struct ath5k_chan_pcal_info *pcal; - int i; - - switch(mode) { - case AR5K_EEPROM_MODE_11B: - pcal = ee->ee_pwr_cal_b; - break; - case AR5K_EEPROM_MODE_11G: - pcal = ee->ee_pwr_cal_g; - break; - default: - return -EINVAL; - } - - ath5k_eeprom_read_freq_list(ah, &offset, - AR5K_EEPROM_N_2GHZ_CHAN_2413, pcal, - &ee->ee_n_piers[mode]); - for(i = 0; i < AR5K_EEPROM_N_2GHZ_CHAN_2413; i += 1) { - pcal[i].freq = ath5k_eeprom_bin2freq(ee, - pcal[i].freq, mode); - } - - return 0; -} - - -static int -ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - struct ath5k_chan_pcal_info *pcal; - int offset, ret; - int i, j; - u16 val; - - offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); - switch(mode) { - case AR5K_EEPROM_MODE_11A: - if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) - return 0; - - ret = ath5k_eeprom_init_11a_pcal_freq(ah, - offset + AR5K_EEPROM_GROUP1_OFFSET); - if (ret < 0) - return ret; - - offset += AR5K_EEPROM_GROUP2_OFFSET; - pcal = ee->ee_pwr_cal_a; - break; - case AR5K_EEPROM_MODE_11B: - if (!AR5K_EEPROM_HDR_11B(ee->ee_header) && - !AR5K_EEPROM_HDR_11G(ee->ee_header)) - return 0; - - pcal = ee->ee_pwr_cal_b; - offset += AR5K_EEPROM_GROUP3_OFFSET; - - /* fixed piers */ - pcal[0].freq = 2412; - pcal[1].freq = 2447; - pcal[2].freq = 2484; - ee->ee_n_piers[mode] = 3; - break; - case AR5K_EEPROM_MODE_11G: - if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) - return 0; - - pcal = ee->ee_pwr_cal_g; - offset += AR5K_EEPROM_GROUP4_OFFSET; - - /* fixed piers */ - pcal[0].freq = 2312; - pcal[1].freq = 2412; - pcal[2].freq = 2484; - ee->ee_n_piers[mode] = 3; - break; - default: - return -EINVAL; - } - - for (i = 0; i < ee->ee_n_piers[mode]; i++) { - struct ath5k_chan_pcal_info_rf5111 *cdata = - &pcal[i].rf5111_info; - - AR5K_EEPROM_READ(offset++, val); - cdata->pcdac_max = ((val >> 10) & AR5K_EEPROM_PCDAC_M); - cdata->pcdac_min = ((val >> 4) & AR5K_EEPROM_PCDAC_M); - cdata->pwr[0] = ((val << 2) & AR5K_EEPROM_POWER_M); - - AR5K_EEPROM_READ(offset++, val); - cdata->pwr[0] |= ((val >> 14) & 0x3); - cdata->pwr[1] = ((val >> 8) & AR5K_EEPROM_POWER_M); - cdata->pwr[2] = ((val >> 2) & AR5K_EEPROM_POWER_M); - cdata->pwr[3] = ((val << 4) & AR5K_EEPROM_POWER_M); - - AR5K_EEPROM_READ(offset++, val); - cdata->pwr[3] |= ((val >> 12) & 0xf); - cdata->pwr[4] = ((val >> 6) & AR5K_EEPROM_POWER_M); - cdata->pwr[5] = (val & AR5K_EEPROM_POWER_M); - - AR5K_EEPROM_READ(offset++, val); - cdata->pwr[6] = ((val >> 10) & AR5K_EEPROM_POWER_M); - cdata->pwr[7] = ((val >> 4) & AR5K_EEPROM_POWER_M); - cdata->pwr[8] = ((val << 2) & AR5K_EEPROM_POWER_M); - - AR5K_EEPROM_READ(offset++, val); - cdata->pwr[8] |= ((val >> 14) & 0x3); - cdata->pwr[9] = ((val >> 8) & AR5K_EEPROM_POWER_M); - cdata->pwr[10] = ((val >> 2) & AR5K_EEPROM_POWER_M); - - ath5k_get_pcdac_intercepts(ah, cdata->pcdac_min, - cdata->pcdac_max, cdata->pcdac); - - for (j = 0; j < AR5K_EEPROM_N_PCDAC; j++) { - cdata->pwr[j] = (u16) - (AR5K_EEPROM_POWER_STEP * cdata->pwr[j]); - } - } - - return 0; -} - -static int -ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - struct ath5k_chan_pcal_info_rf5112 *chan_pcal_info; - struct ath5k_chan_pcal_info *gen_chan_info; - u32 offset; - unsigned int i, c; - u16 val; - int ret; - - switch (mode) { - case AR5K_EEPROM_MODE_11A: - /* - * Read 5GHz EEPROM channels - */ - offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); - ath5k_eeprom_init_11a_pcal_freq(ah, offset); - - offset += AR5K_EEPROM_GROUP2_OFFSET; - gen_chan_info = ee->ee_pwr_cal_a; - break; - case AR5K_EEPROM_MODE_11B: - offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); - if (AR5K_EEPROM_HDR_11A(ee->ee_header)) - offset += AR5K_EEPROM_GROUP3_OFFSET; - - /* NB: frequency piers parsed during mode init */ - gen_chan_info = ee->ee_pwr_cal_b; - break; - case AR5K_EEPROM_MODE_11G: - offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); - if (AR5K_EEPROM_HDR_11A(ee->ee_header)) - offset += AR5K_EEPROM_GROUP4_OFFSET; - else if (AR5K_EEPROM_HDR_11B(ee->ee_header)) - offset += AR5K_EEPROM_GROUP2_OFFSET; - - /* NB: frequency piers parsed during mode init */ - gen_chan_info = ee->ee_pwr_cal_g; - break; - default: - return -EINVAL; - } - - for (i = 0; i < ee->ee_n_piers[mode]; i++) { - chan_pcal_info = &gen_chan_info[i].rf5112_info; - - /* Power values in dBm * 4 - * for the lower xpd gain curve - * (0 dBm -> higher output power) */ - for (c = 0; c < AR5K_EEPROM_N_XPD0_POINTS; c++) { - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr_x0[c] = (val & 0xff); - chan_pcal_info->pwr_x0[++c] = ((val >> 8) & 0xff); - } - - /* PCDAC steps - * corresponding to the above power - * measurements */ - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pcdac_x0[1] = (val & 0x1f); - chan_pcal_info->pcdac_x0[2] = ((val >> 5) & 0x1f); - chan_pcal_info->pcdac_x0[3] = ((val >> 10) & 0x1f); - - /* Power values in dBm * 4 - * for the higher xpd gain curve - * (18 dBm -> lower output power) */ - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr_x3[0] = (val & 0xff); - chan_pcal_info->pwr_x3[1] = ((val >> 8) & 0xff); - - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr_x3[2] = (val & 0xff); - - /* PCDAC steps - * corresponding to the above power - * measurements (static) */ - chan_pcal_info->pcdac_x3[0] = 20; - chan_pcal_info->pcdac_x3[1] = 35; - chan_pcal_info->pcdac_x3[2] = 63; - - if (ee->ee_version >= AR5K_EEPROM_VERSION_4_3) { - chan_pcal_info->pcdac_x0[0] = ((val >> 8) & 0xff); - - /* Last xpd0 power level is also channel maximum */ - gen_chan_info[i].max_pwr = chan_pcal_info->pwr_x0[3]; - } else { - chan_pcal_info->pcdac_x0[0] = 1; - gen_chan_info[i].max_pwr = ((val >> 8) & 0xff); - } - - /* Recreate pcdac_x0 table for this channel using pcdac steps */ - chan_pcal_info->pcdac_x0[1] += chan_pcal_info->pcdac_x0[0]; - chan_pcal_info->pcdac_x0[2] += chan_pcal_info->pcdac_x0[1]; - chan_pcal_info->pcdac_x0[3] += chan_pcal_info->pcdac_x0[2]; - } - - return 0; -} - -static inline unsigned int -ath5k_pdgains_size_2413(struct ath5k_eeprom_info *ee, unsigned int mode) -{ - static const unsigned int pdgains_size[] = { 4, 6, 9, 12 }; - unsigned int sz; - - sz = pdgains_size[ee->ee_pd_gains[mode] - 1]; - sz *= ee->ee_n_piers[mode]; - - return sz; -} - -static unsigned int -ath5k_cal_data_offset_2413(struct ath5k_eeprom_info *ee, int mode) -{ - u32 offset = AR5K_EEPROM_CAL_DATA_START(ee->ee_misc4); - - switch(mode) { - case AR5K_EEPROM_MODE_11G: - if (AR5K_EEPROM_HDR_11B(ee->ee_header)) - offset += ath5k_pdgains_size_2413(ee, AR5K_EEPROM_MODE_11B) + 2; - /* fall through */ - case AR5K_EEPROM_MODE_11B: - if (AR5K_EEPROM_HDR_11A(ee->ee_header)) - offset += ath5k_pdgains_size_2413(ee, AR5K_EEPROM_MODE_11A) + 5; - /* fall through */ - case AR5K_EEPROM_MODE_11A: - break; - default: - break; - } - - return offset; -} - -static int -ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - struct ath5k_chan_pcal_info_rf2413 *chan_pcal_info; - struct ath5k_chan_pcal_info *gen_chan_info; - unsigned int i, c; - u32 offset; - int ret; - u16 val; - u8 pd_gains = 0; - - if (ee->ee_x_gain[mode] & 0x1) pd_gains++; - if ((ee->ee_x_gain[mode] >> 1) & 0x1) pd_gains++; - if ((ee->ee_x_gain[mode] >> 2) & 0x1) pd_gains++; - if ((ee->ee_x_gain[mode] >> 3) & 0x1) pd_gains++; - ee->ee_pd_gains[mode] = pd_gains; - - offset = ath5k_cal_data_offset_2413(ee, mode); - switch (mode) { - case AR5K_EEPROM_MODE_11A: - if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) - return 0; - - ath5k_eeprom_init_11a_pcal_freq(ah, offset); - offset += AR5K_EEPROM_N_5GHZ_CHAN / 2; - gen_chan_info = ee->ee_pwr_cal_a; - break; - case AR5K_EEPROM_MODE_11B: - if (!AR5K_EEPROM_HDR_11B(ee->ee_header)) - return 0; - - ath5k_eeprom_init_11bg_2413(ah, mode, offset); - offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; - gen_chan_info = ee->ee_pwr_cal_b; - break; - case AR5K_EEPROM_MODE_11G: - if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) - return 0; - - ath5k_eeprom_init_11bg_2413(ah, mode, offset); - offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; - gen_chan_info = ee->ee_pwr_cal_g; - break; - default: - return -EINVAL; - } - - if (pd_gains == 0) - return 0; - - for (i = 0; i < ee->ee_n_piers[mode]; i++) { - chan_pcal_info = &gen_chan_info[i].rf2413_info; - - /* - * Read pwr_i, pddac_i and the first - * 2 pd points (pwr, pddac) - */ - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr_i[0] = val & 0x1f; - chan_pcal_info->pddac_i[0] = (val >> 5) & 0x7f; - chan_pcal_info->pwr[0][0] = - (val >> 12) & 0xf; - - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[0][0] = val & 0x3f; - chan_pcal_info->pwr[0][1] = (val >> 6) & 0xf; - chan_pcal_info->pddac[0][1] = - (val >> 10) & 0x3f; - - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr[0][2] = val & 0xf; - chan_pcal_info->pddac[0][2] = - (val >> 4) & 0x3f; - - chan_pcal_info->pwr[0][3] = 0; - chan_pcal_info->pddac[0][3] = 0; - - if (pd_gains > 1) { - /* - * Pd gain 0 is not the last pd gain - * so it only has 2 pd points. - * Continue wih pd gain 1. - */ - chan_pcal_info->pwr_i[1] = (val >> 10) & 0x1f; - - chan_pcal_info->pddac_i[1] = (val >> 15) & 0x1; - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac_i[1] |= (val & 0x3F) << 1; - - chan_pcal_info->pwr[1][0] = (val >> 6) & 0xf; - chan_pcal_info->pddac[1][0] = - (val >> 10) & 0x3f; - - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr[1][1] = val & 0xf; - chan_pcal_info->pddac[1][1] = - (val >> 4) & 0x3f; - chan_pcal_info->pwr[1][2] = - (val >> 10) & 0xf; - - chan_pcal_info->pddac[1][2] = - (val >> 14) & 0x3; - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[1][2] |= - (val & 0xF) << 2; - - chan_pcal_info->pwr[1][3] = 0; - chan_pcal_info->pddac[1][3] = 0; - } else if (pd_gains == 1) { - /* - * Pd gain 0 is the last one so - * read the extra point. - */ - chan_pcal_info->pwr[0][3] = - (val >> 10) & 0xf; - - chan_pcal_info->pddac[0][3] = - (val >> 14) & 0x3; - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[0][3] |= - (val & 0xF) << 2; - } - - /* - * Proceed with the other pd_gains - * as above. - */ - if (pd_gains > 2) { - chan_pcal_info->pwr_i[2] = (val >> 4) & 0x1f; - chan_pcal_info->pddac_i[2] = (val >> 9) & 0x7f; - - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr[2][0] = - (val >> 0) & 0xf; - chan_pcal_info->pddac[2][0] = - (val >> 4) & 0x3f; - chan_pcal_info->pwr[2][1] = - (val >> 10) & 0xf; - - chan_pcal_info->pddac[2][1] = - (val >> 14) & 0x3; - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[2][1] |= - (val & 0xF) << 2; - - chan_pcal_info->pwr[2][2] = - (val >> 4) & 0xf; - chan_pcal_info->pddac[2][2] = - (val >> 8) & 0x3f; - - chan_pcal_info->pwr[2][3] = 0; - chan_pcal_info->pddac[2][3] = 0; - } else if (pd_gains == 2) { - chan_pcal_info->pwr[1][3] = - (val >> 4) & 0xf; - chan_pcal_info->pddac[1][3] = - (val >> 8) & 0x3f; - } - - if (pd_gains > 3) { - chan_pcal_info->pwr_i[3] = (val >> 14) & 0x3; - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr_i[3] |= ((val >> 0) & 0x7) << 2; - - chan_pcal_info->pddac_i[3] = (val >> 3) & 0x7f; - chan_pcal_info->pwr[3][0] = - (val >> 10) & 0xf; - chan_pcal_info->pddac[3][0] = - (val >> 14) & 0x3; - - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[3][0] |= - (val & 0xF) << 2; - chan_pcal_info->pwr[3][1] = - (val >> 4) & 0xf; - chan_pcal_info->pddac[3][1] = - (val >> 8) & 0x3f; - - chan_pcal_info->pwr[3][2] = - (val >> 14) & 0x3; - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr[3][2] |= - ((val >> 0) & 0x3) << 2; - - chan_pcal_info->pddac[3][2] = - (val >> 2) & 0x3f; - chan_pcal_info->pwr[3][3] = - (val >> 8) & 0xf; - - chan_pcal_info->pddac[3][3] = - (val >> 12) & 0xF; - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[3][3] |= - ((val >> 0) & 0x3) << 4; - } else if (pd_gains == 3) { - chan_pcal_info->pwr[2][3] = - (val >> 14) & 0x3; - AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr[2][3] |= - ((val >> 0) & 0x3) << 2; - - chan_pcal_info->pddac[2][3] = - (val >> 2) & 0x3f; - } - - for (c = 0; c < pd_gains; c++) { - /* Recreate pwr table for this channel using pwr steps */ - chan_pcal_info->pwr[c][0] += chan_pcal_info->pwr_i[c] * 2; - chan_pcal_info->pwr[c][1] += chan_pcal_info->pwr[c][0]; - chan_pcal_info->pwr[c][2] += chan_pcal_info->pwr[c][1]; - chan_pcal_info->pwr[c][3] += chan_pcal_info->pwr[c][2]; - if (chan_pcal_info->pwr[c][3] == chan_pcal_info->pwr[c][2]) - chan_pcal_info->pwr[c][3] = 0; - - /* Recreate pddac table for this channel using pddac steps */ - chan_pcal_info->pddac[c][0] += chan_pcal_info->pddac_i[c]; - chan_pcal_info->pddac[c][1] += chan_pcal_info->pddac[c][0]; - chan_pcal_info->pddac[c][2] += chan_pcal_info->pddac[c][1]; - chan_pcal_info->pddac[c][3] += chan_pcal_info->pddac[c][2]; - if (chan_pcal_info->pddac[c][3] == chan_pcal_info->pddac[c][2]) - chan_pcal_info->pddac[c][3] = 0; - } - } - - return 0; -} - -/* - * Read per rate target power (this is the maximum tx power - * supported by the card). This info is used when setting - * tx power, no matter the channel. - * - * This also works for v5 EEPROMs. - */ -static int ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - struct ath5k_rate_pcal_info *rate_pcal_info; - u16 *rate_target_pwr_num; - u32 offset; - u16 val; - int ret, i; - - offset = AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1); - rate_target_pwr_num = &ee->ee_rate_target_pwr_num[mode]; - switch (mode) { - case AR5K_EEPROM_MODE_11A: - offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version); - rate_pcal_info = ee->ee_rate_tpwr_a; - ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_CHAN; - break; - case AR5K_EEPROM_MODE_11B: - offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version); - rate_pcal_info = ee->ee_rate_tpwr_b; - ee->ee_rate_target_pwr_num[mode] = 2; /* 3rd is g mode's 1st */ - break; - case AR5K_EEPROM_MODE_11G: - offset += AR5K_EEPROM_TARGET_PWR_OFF_11G(ee->ee_version); - rate_pcal_info = ee->ee_rate_tpwr_g; - ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_2GHZ_CHAN; - break; - default: - return -EINVAL; - } - - /* Different freq mask for older eeproms (<= v3.2) */ - if (ee->ee_version <= AR5K_EEPROM_VERSION_3_2) { - for (i = 0; i < (*rate_target_pwr_num); i++) { - AR5K_EEPROM_READ(offset++, val); - rate_pcal_info[i].freq = - ath5k_eeprom_bin2freq(ee, (val >> 9) & 0x7f, mode); - - rate_pcal_info[i].target_power_6to24 = ((val >> 3) & 0x3f); - rate_pcal_info[i].target_power_36 = (val << 3) & 0x3f; - - AR5K_EEPROM_READ(offset++, val); - - if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS || - val == 0) { - (*rate_target_pwr_num) = i; - break; - } - - rate_pcal_info[i].target_power_36 |= ((val >> 13) & 0x7); - rate_pcal_info[i].target_power_48 = ((val >> 7) & 0x3f); - rate_pcal_info[i].target_power_54 = ((val >> 1) & 0x3f); - } - } else { - for (i = 0; i < (*rate_target_pwr_num); i++) { - AR5K_EEPROM_READ(offset++, val); - rate_pcal_info[i].freq = - ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode); - - rate_pcal_info[i].target_power_6to24 = ((val >> 2) & 0x3f); - rate_pcal_info[i].target_power_36 = (val << 4) & 0x3f; - - AR5K_EEPROM_READ(offset++, val); - - if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS || - val == 0) { - (*rate_target_pwr_num) = i; - break; - } - - rate_pcal_info[i].target_power_36 |= (val >> 12) & 0xf; - rate_pcal_info[i].target_power_48 = ((val >> 6) & 0x3f); - rate_pcal_info[i].target_power_54 = (val & 0x3f); - } - } - - return 0; -} - -static int -ath5k_eeprom_read_pcal_info(struct ath5k_hw *ah) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - int (*read_pcal)(struct ath5k_hw *hw, int mode); - int mode; - int err; - - if ((ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) && - (AR5K_EEPROM_EEMAP(ee->ee_misc0) == 1)) - read_pcal = ath5k_eeprom_read_pcal_info_5112; - else if ((ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0) && - (AR5K_EEPROM_EEMAP(ee->ee_misc0) == 2)) - read_pcal = ath5k_eeprom_read_pcal_info_2413; - else - read_pcal = ath5k_eeprom_read_pcal_info_5111; - - for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) { - err = read_pcal(ah, mode); - if (err) - return err; - - err = ath5k_eeprom_read_target_rate_pwr_info(ah, mode); - if (err < 0) - return err; - } - - return 0; -} - -/* Read conformance test limits */ -static int -ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - struct ath5k_edge_power *rep; - unsigned int fmask, pmask; - unsigned int ctl_mode; - int ret, i, j; - u32 offset; - u16 val; - - pmask = AR5K_EEPROM_POWER_M; - fmask = AR5K_EEPROM_FREQ_M(ee->ee_version); - offset = AR5K_EEPROM_CTL(ee->ee_version); - ee->ee_ctls = AR5K_EEPROM_N_CTLS(ee->ee_version); - for (i = 0; i < ee->ee_ctls; i += 2) { - AR5K_EEPROM_READ(offset++, val); - ee->ee_ctl[i] = (val >> 8) & 0xff; - ee->ee_ctl[i + 1] = val & 0xff; - } - - offset = AR5K_EEPROM_GROUP8_OFFSET; - if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0) - offset += AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1) - - AR5K_EEPROM_GROUP5_OFFSET; - else - offset += AR5K_EEPROM_GROUPS_START(ee->ee_version); - - rep = ee->ee_ctl_pwr; - for(i = 0; i < ee->ee_ctls; i++) { - switch(ee->ee_ctl[i] & AR5K_CTL_MODE_M) { - case AR5K_CTL_11A: - case AR5K_CTL_TURBO: - ctl_mode = AR5K_EEPROM_MODE_11A; - break; - default: - ctl_mode = AR5K_EEPROM_MODE_11G; - break; - } - if (ee->ee_ctl[i] == 0) { - if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) - offset += 8; - else - offset += 7; - rep += AR5K_EEPROM_N_EDGES; - continue; - } - if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) { - for (j = 0; j < AR5K_EEPROM_N_EDGES; j += 2) { - AR5K_EEPROM_READ(offset++, val); - rep[j].freq = (val >> 8) & fmask; - rep[j + 1].freq = val & fmask; - } - for (j = 0; j < AR5K_EEPROM_N_EDGES; j += 2) { - AR5K_EEPROM_READ(offset++, val); - rep[j].edge = (val >> 8) & pmask; - rep[j].flag = (val >> 14) & 1; - rep[j + 1].edge = val & pmask; - rep[j + 1].flag = (val >> 6) & 1; - } - } else { - AR5K_EEPROM_READ(offset++, val); - rep[0].freq = (val >> 9) & fmask; - rep[1].freq = (val >> 2) & fmask; - rep[2].freq = (val << 5) & fmask; - - AR5K_EEPROM_READ(offset++, val); - rep[2].freq |= (val >> 11) & 0x1f; - rep[3].freq = (val >> 4) & fmask; - rep[4].freq = (val << 3) & fmask; - - AR5K_EEPROM_READ(offset++, val); - rep[4].freq |= (val >> 13) & 0x7; - rep[5].freq = (val >> 6) & fmask; - rep[6].freq = (val << 1) & fmask; - - AR5K_EEPROM_READ(offset++, val); - rep[6].freq |= (val >> 15) & 0x1; - rep[7].freq = (val >> 8) & fmask; - - rep[0].edge = (val >> 2) & pmask; - rep[1].edge = (val << 4) & pmask; - - AR5K_EEPROM_READ(offset++, val); - rep[1].edge |= (val >> 12) & 0xf; - rep[2].edge = (val >> 6) & pmask; - rep[3].edge = val & pmask; - - AR5K_EEPROM_READ(offset++, val); - rep[4].edge = (val >> 10) & pmask; - rep[5].edge = (val >> 4) & pmask; - rep[6].edge = (val << 2) & pmask; - - AR5K_EEPROM_READ(offset++, val); - rep[6].edge |= (val >> 14) & 0x3; - rep[7].edge = (val >> 8) & pmask; - } - for (j = 0; j < AR5K_EEPROM_N_EDGES; j++) { - rep[j].freq = ath5k_eeprom_bin2freq(ee, - rep[j].freq, ctl_mode); - } - rep += AR5K_EEPROM_N_EDGES; - } - - return 0; -} - - -/* - * Initialize eeprom power tables - */ -int -ath5k_eeprom_init(struct ath5k_hw *ah) -{ - int err; - - err = ath5k_eeprom_init_header(ah); - if (err < 0) - return err; - - err = ath5k_eeprom_init_modes(ah); - if (err < 0) - return err; - - err = ath5k_eeprom_read_pcal_info(ah); - if (err < 0) - return err; - - err = ath5k_eeprom_read_ctl_info(ah); - if (err < 0) - return err; - - return 0; -} -/* - * Read the MAC address from eeprom - */ -int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) -{ - u8 mac_d[ETH_ALEN]; - u32 total, offset; - u16 data; - int octet, ret; - - memset(mac, 0, ETH_ALEN); - memset(mac_d, 0, ETH_ALEN); - - ret = ath5k_hw_eeprom_read(ah, 0x20, &data); - if (ret) - return ret; - - for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) { - ret = ath5k_hw_eeprom_read(ah, offset, &data); - if (ret) - return ret; - - total += data; - mac_d[octet + 1] = data & 0xff; - mac_d[octet] = data >> 8; - octet += 2; - } - - memcpy(mac, mac_d, ETH_ALEN); - - if (!total || total == 3 * 0xffff) - return -EINVAL; - - return 0; -} - diff --git a/drivers/net/wireless/ath5k/eeprom.h b/drivers/net/wireless/ath5k/eeprom.h deleted file mode 100644 index 09eb7d0176a..00000000000 --- a/drivers/net/wireless/ath5k/eeprom.h +++ /dev/null @@ -1,394 +0,0 @@ -/* - * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -/* - * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE) - */ -#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */ -#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */ -#define AR5K_EEPROM_MAGIC_5212 0x0000145c /* 5212 */ -#define AR5K_EEPROM_MAGIC_5211 0x0000145b /* 5211 */ -#define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */ - -#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */ -#define AR5K_EEPROM_CHECKSUM 0x00c0 /* EEPROM checksum */ -#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */ -#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE) -#define AR5K_EEPROM_INFO_CKSUM 0xffff -#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n)) - -#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */ -#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */ -#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */ -#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */ -#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */ -#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain, ee_cck_ofdm_power_delta (eeprom_read_modes) */ -#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */ -#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */ -#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */ -#define AR5K_EEPROM_VERSION_4_3 0x4003 /* power calibration changes */ -#define AR5K_EEPROM_VERSION_4_4 0x4004 -#define AR5K_EEPROM_VERSION_4_5 0x4005 -#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */ -#define AR5K_EEPROM_VERSION_4_7 0x3007 /* 4007 ? */ -#define AR5K_EEPROM_VERSION_4_9 0x4009 /* EAR futureproofing */ -#define AR5K_EEPROM_VERSION_5_0 0x5000 /* Has 2413 PDADC calibration etc */ -#define AR5K_EEPROM_VERSION_5_1 0x5001 /* Has capability values */ -#define AR5K_EEPROM_VERSION_5_3 0x5003 /* Has spur mitigation tables */ - -#define AR5K_EEPROM_MODE_11A 0 -#define AR5K_EEPROM_MODE_11B 1 -#define AR5K_EEPROM_MODE_11G 2 - -#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */ -#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1) -#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1) -#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1) -#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz (?) */ -#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for a/XR mode (eeprom_init) */ -#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) -#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ -#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz */ - -#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c -#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2 -#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002 -#define AR5K_EEPROM_RFKILL_POLARITY_S 1 - -/* Newer EEPROMs are using a different offset */ -#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \ - (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0) - -#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3) -#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((s8)(((_v) >> 8) & 0xff)) -#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((s8)((_v) & 0xff)) - -/* Misc values available since EEPROM 4.0 */ -#define AR5K_EEPROM_MISC0 AR5K_EEPROM_INFO(4) -#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff) -#define AR5K_EEPROM_HDR_XR2_DIS(_v) (((_v) >> 12) & 0x1) -#define AR5K_EEPROM_HDR_XR5_DIS(_v) (((_v) >> 13) & 0x1) -#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3) - -#define AR5K_EEPROM_MISC1 AR5K_EEPROM_INFO(5) -#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff) -#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1) -#define AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(_v) (((_v) >> 15) & 0x1) - -#define AR5K_EEPROM_MISC2 AR5K_EEPROM_INFO(6) -#define AR5K_EEPROM_EEP_FILE_VERSION(_v) (((_v) >> 8) & 0xff) -#define AR5K_EEPROM_EAR_FILE_VERSION(_v) ((_v) & 0xff) - -#define AR5K_EEPROM_MISC3 AR5K_EEPROM_INFO(7) -#define AR5K_EEPROM_ART_BUILD_NUM(_v) (((_v) >> 10) & 0x3f) -#define AR5K_EEPROM_EAR_FILE_ID(_v) ((_v) & 0xff) - -#define AR5K_EEPROM_MISC4 AR5K_EEPROM_INFO(8) -#define AR5K_EEPROM_CAL_DATA_START(_v) (((_v) >> 4) & 0xfff) -#define AR5K_EEPROM_MASK_R0(_v) (((_v) >> 2) & 0x3) -#define AR5K_EEPROM_MASK_R1(_v) ((_v) & 0x3) - -#define AR5K_EEPROM_MISC5 AR5K_EEPROM_INFO(9) -#define AR5K_EEPROM_COMP_DIS(_v) ((_v) & 0x1) -#define AR5K_EEPROM_AES_DIS(_v) (((_v) >> 1) & 0x1) -#define AR5K_EEPROM_FF_DIS(_v) (((_v) >> 2) & 0x1) -#define AR5K_EEPROM_BURST_DIS(_v) (((_v) >> 3) & 0x1) -#define AR5K_EEPROM_MAX_QCU(_v) (((_v) >> 4) & 0xf) -#define AR5K_EEPROM_HEAVY_CLIP_EN(_v) (((_v) >> 8) & 0x1) -#define AR5K_EEPROM_KEY_CACHE_SIZE(_v) (((_v) >> 12) & 0xf) - -#define AR5K_EEPROM_MISC6 AR5K_EEPROM_INFO(10) -#define AR5K_EEPROM_TX_CHAIN_DIS ((_v) & 0x8) -#define AR5K_EEPROM_RX_CHAIN_DIS (((_v) >> 3) & 0x8) -#define AR5K_EEPROM_FCC_MID_EN (((_v) >> 6) & 0x1) -#define AR5K_EEPROM_JAP_U1EVEN_EN (((_v) >> 7) & 0x1) -#define AR5K_EEPROM_JAP_U2_EN (((_v) >> 8) & 0x1) -#define AR5K_EEPROM_JAP_U1ODD_EN (((_v) >> 9) & 0x1) -#define AR5K_EEPROM_JAP_11A_NEW_EN (((_v) >> 10) & 0x1) - -/* calibration settings */ -#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4) -#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2) -#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d) -#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */ -#define AR5K_EEPROM_GROUPS_START(_v) AR5K_EEPROM_OFF(_v, 0x0100, 0x0150) /* Start of Groups */ -#define AR5K_EEPROM_GROUP1_OFFSET 0x0 -#define AR5K_EEPROM_GROUP2_OFFSET 0x5 -#define AR5K_EEPROM_GROUP3_OFFSET 0x37 -#define AR5K_EEPROM_GROUP4_OFFSET 0x46 -#define AR5K_EEPROM_GROUP5_OFFSET 0x55 -#define AR5K_EEPROM_GROUP6_OFFSET 0x65 -#define AR5K_EEPROM_GROUP7_OFFSET 0x69 -#define AR5K_EEPROM_GROUP8_OFFSET 0x6f - -#define AR5K_EEPROM_TARGET_PWR_OFF_11A(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \ - AR5K_EEPROM_GROUP5_OFFSET, 0x0000) -#define AR5K_EEPROM_TARGET_PWR_OFF_11B(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \ - AR5K_EEPROM_GROUP6_OFFSET, 0x0010) -#define AR5K_EEPROM_TARGET_PWR_OFF_11G(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \ - AR5K_EEPROM_GROUP7_OFFSET, 0x0014) - -/* [3.1 - 3.3] */ -#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec -#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed - -#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */ -#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */ -#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */ -#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */ -#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008 -#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */ -#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020 -#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */ -#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080 -#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */ -#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200 -#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */ -#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800 -#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */ -#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000 -#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */ -#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000 - -/* Some EEPROM defines */ -#define AR5K_EEPROM_EEP_SCALE 100 -#define AR5K_EEPROM_EEP_DELTA 10 -#define AR5K_EEPROM_N_MODES 3 -#define AR5K_EEPROM_N_5GHZ_CHAN 10 -#define AR5K_EEPROM_N_2GHZ_CHAN 3 -#define AR5K_EEPROM_N_2GHZ_CHAN_2413 4 -#define AR5K_EEPROM_MAX_CHAN 10 -#define AR5K_EEPROM_N_PWR_POINTS_5111 11 -#define AR5K_EEPROM_N_PCDAC 11 -#define AR5K_EEPROM_N_PHASE_CAL 5 -#define AR5K_EEPROM_N_TEST_FREQ 8 -#define AR5K_EEPROM_N_EDGES 8 -#define AR5K_EEPROM_N_INTERCEPTS 11 -#define AR5K_EEPROM_FREQ_M(_v) AR5K_EEPROM_OFF(_v, 0x7f, 0xff) -#define AR5K_EEPROM_PCDAC_M 0x3f -#define AR5K_EEPROM_PCDAC_START 1 -#define AR5K_EEPROM_PCDAC_STOP 63 -#define AR5K_EEPROM_PCDAC_STEP 1 -#define AR5K_EEPROM_NON_EDGE_M 0x40 -#define AR5K_EEPROM_CHANNEL_POWER 8 -#define AR5K_EEPROM_N_OBDB 4 -#define AR5K_EEPROM_OBDB_DIS 0xffff -#define AR5K_EEPROM_CHANNEL_DIS 0xff -#define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10) -#define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32) -#define AR5K_EEPROM_MAX_CTLS 32 -#define AR5K_EEPROM_N_XPD_PER_CHANNEL 4 -#define AR5K_EEPROM_N_XPD0_POINTS 4 -#define AR5K_EEPROM_N_XPD3_POINTS 3 -#define AR5K_EEPROM_N_PD_GAINS 4 -#define AR5K_EEPROM_N_PD_POINTS 5 -#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35 -#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55 -#define AR5K_EEPROM_POWER_M 0x3f -#define AR5K_EEPROM_POWER_MIN 0 -#define AR5K_EEPROM_POWER_MAX 3150 -#define AR5K_EEPROM_POWER_STEP 50 -#define AR5K_EEPROM_POWER_TABLE_SIZE 64 -#define AR5K_EEPROM_N_POWER_LOC_11B 4 -#define AR5K_EEPROM_N_POWER_LOC_11G 6 -#define AR5K_EEPROM_I_GAIN 10 -#define AR5K_EEPROM_CCK_OFDM_DELTA 15 -#define AR5K_EEPROM_N_IQ_CAL 2 - -#define AR5K_EEPROM_READ(_o, _v) do { \ - ret = ath5k_hw_eeprom_read(ah, (_o), &(_v)); \ - if (ret) \ - return ret; \ -} while (0) - -#define AR5K_EEPROM_READ_HDR(_o, _v) \ - AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \ - -enum ath5k_ant_setting { - AR5K_ANT_VARIABLE = 0, /* variable by programming */ - AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */ - AR5K_ANT_FIXED_B = 2, /* fixed to 11b frequencies */ - AR5K_ANT_MAX = 3, -}; - -enum ath5k_ctl_mode { - AR5K_CTL_11A = 0, - AR5K_CTL_11B = 1, - AR5K_CTL_11G = 2, - AR5K_CTL_TURBO = 3, - AR5K_CTL_108G = 4, - AR5K_CTL_2GHT20 = 5, - AR5K_CTL_5GHT20 = 6, - AR5K_CTL_2GHT40 = 7, - AR5K_CTL_5GHT40 = 8, - AR5K_CTL_MODE_M = 15, -}; - -/* Per channel calibration data, used for power table setup */ -struct ath5k_chan_pcal_info_rf5111 { - /* Power levels in half dbm units - * for one power curve. */ - u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111]; - /* PCDAC table steps - * for the above values */ - u8 pcdac[AR5K_EEPROM_N_PWR_POINTS_5111]; - /* Starting PCDAC step */ - u8 pcdac_min; - /* Final PCDAC step */ - u8 pcdac_max; -}; - -struct ath5k_chan_pcal_info_rf5112 { - /* Power levels in quarter dBm units - * for lower (0) and higher (3) - * level curves */ - s8 pwr_x0[AR5K_EEPROM_N_XPD0_POINTS]; - s8 pwr_x3[AR5K_EEPROM_N_XPD3_POINTS]; - /* PCDAC table steps - * for the above values */ - u8 pcdac_x0[AR5K_EEPROM_N_XPD0_POINTS]; - u8 pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS]; -}; - -struct ath5k_chan_pcal_info_rf2413 { - /* Starting pwr/pddac values */ - s8 pwr_i[AR5K_EEPROM_N_PD_GAINS]; - u8 pddac_i[AR5K_EEPROM_N_PD_GAINS]; - /* (pwr,pddac) points */ - s8 pwr[AR5K_EEPROM_N_PD_GAINS] - [AR5K_EEPROM_N_PD_POINTS]; - u8 pddac[AR5K_EEPROM_N_PD_GAINS] - [AR5K_EEPROM_N_PD_POINTS]; -}; - -struct ath5k_chan_pcal_info { - /* Frequency */ - u16 freq; - /* Max available power */ - s8 max_pwr; - union { - struct ath5k_chan_pcal_info_rf5111 rf5111_info; - struct ath5k_chan_pcal_info_rf5112 rf5112_info; - struct ath5k_chan_pcal_info_rf2413 rf2413_info; - }; -}; - -/* Per rate calibration data for each mode, used for power table setup */ -struct ath5k_rate_pcal_info { - u16 freq; /* Frequency */ - /* Power level for 6-24Mbit/s rates */ - u16 target_power_6to24; - /* Power level for 36Mbit rate */ - u16 target_power_36; - /* Power level for 48Mbit rate */ - u16 target_power_48; - /* Power level for 54Mbit rate */ - u16 target_power_54; -}; - -/* Power edges for conformance test limits */ -struct ath5k_edge_power { - u16 freq; - u16 edge; /* in half dBm */ - bool flag; -}; - -/* EEPROM calibration data */ -struct ath5k_eeprom_info { - - /* Header information */ - u16 ee_magic; - u16 ee_protect; - u16 ee_regdomain; - u16 ee_version; - u16 ee_header; - u16 ee_ant_gain; - u16 ee_misc0; - u16 ee_misc1; - u16 ee_misc2; - u16 ee_misc3; - u16 ee_misc4; - u16 ee_misc5; - u16 ee_misc6; - u16 ee_cck_ofdm_gain_delta; - u16 ee_cck_ofdm_power_delta; - u16 ee_scaled_cck_delta; - - /* Used for tx thermal adjustment (eeprom_init, rfregs) */ - u16 ee_tx_clip; - u16 ee_pwd_84; - u16 ee_pwd_90; - u16 ee_gain_select; - - /* RF Calibration settings (reset, rfregs) */ - u16 ee_i_cal[AR5K_EEPROM_N_MODES]; - u16 ee_q_cal[AR5K_EEPROM_N_MODES]; - u16 ee_fixed_bias[AR5K_EEPROM_N_MODES]; - u16 ee_turbo_max_power[AR5K_EEPROM_N_MODES]; - u16 ee_xr_power[AR5K_EEPROM_N_MODES]; - u16 ee_switch_settling[AR5K_EEPROM_N_MODES]; - u16 ee_atn_tx_rx[AR5K_EEPROM_N_MODES]; - u16 ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC]; - u16 ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; - u16 ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; - u16 ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES]; - u16 ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES]; - u16 ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES]; - u16 ee_thr_62[AR5K_EEPROM_N_MODES]; - u16 ee_xlna_gain[AR5K_EEPROM_N_MODES]; - u16 ee_xpd[AR5K_EEPROM_N_MODES]; - u16 ee_x_gain[AR5K_EEPROM_N_MODES]; - u16 ee_i_gain[AR5K_EEPROM_N_MODES]; - u16 ee_margin_tx_rx[AR5K_EEPROM_N_MODES]; - u16 ee_switch_settling_turbo[AR5K_EEPROM_N_MODES]; - u16 ee_margin_tx_rx_turbo[AR5K_EEPROM_N_MODES]; - u16 ee_atn_tx_rx_turbo[AR5K_EEPROM_N_MODES]; - - /* Power calibration data */ - u16 ee_false_detect[AR5K_EEPROM_N_MODES]; - - /* Number of pd gain curves per mode (RF2413) */ - u8 ee_pd_gains[AR5K_EEPROM_N_MODES]; - - u8 ee_n_piers[AR5K_EEPROM_N_MODES]; - struct ath5k_chan_pcal_info ee_pwr_cal_a[AR5K_EEPROM_N_5GHZ_CHAN]; - struct ath5k_chan_pcal_info ee_pwr_cal_b[AR5K_EEPROM_N_2GHZ_CHAN]; - struct ath5k_chan_pcal_info ee_pwr_cal_g[AR5K_EEPROM_N_2GHZ_CHAN]; - - /* Per rate target power levels */ - u16 ee_rate_target_pwr_num[AR5K_EEPROM_N_MODES]; - struct ath5k_rate_pcal_info ee_rate_tpwr_a[AR5K_EEPROM_N_5GHZ_CHAN]; - struct ath5k_rate_pcal_info ee_rate_tpwr_b[AR5K_EEPROM_N_2GHZ_CHAN]; - struct ath5k_rate_pcal_info ee_rate_tpwr_g[AR5K_EEPROM_N_2GHZ_CHAN]; - - /* Conformance test limits (Unused) */ - u16 ee_ctls; - u16 ee_ctl[AR5K_EEPROM_MAX_CTLS]; - struct ath5k_edge_power ee_ctl_pwr[AR5K_EEPROM_N_EDGES * AR5K_EEPROM_MAX_CTLS]; - - /* Noise Floor Calibration settings */ - s16 ee_noise_floor_thr[AR5K_EEPROM_N_MODES]; - s8 ee_adc_desired_size[AR5K_EEPROM_N_MODES]; - s8 ee_pga_desired_size[AR5K_EEPROM_N_MODES]; - s8 ee_adc_desired_size_turbo[AR5K_EEPROM_N_MODES]; - s8 ee_pga_desired_size_turbo[AR5K_EEPROM_N_MODES]; - s8 ee_pd_gain_overlap; - - u32 ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; -}; - diff --git a/drivers/net/wireless/ath5k/gpio.c b/drivers/net/wireless/ath5k/gpio.c deleted file mode 100644 index b77205adc18..00000000000 --- a/drivers/net/wireless/ath5k/gpio.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -/****************\ - GPIO Functions -\****************/ - -#include "ath5k.h" -#include "reg.h" -#include "debug.h" -#include "base.h" - -/* - * Set led state - */ -void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) -{ - u32 led; - /*5210 has different led mode handling*/ - u32 led_5210; - - ATH5K_TRACE(ah->ah_sc); - - /*Reset led status*/ - if (ah->ah_version != AR5K_AR5210) - AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, - AR5K_PCICFG_LEDMODE | AR5K_PCICFG_LED); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED); - - /* - * Some blinking values, define at your wish - */ - switch (state) { - case AR5K_LED_SCAN: - case AR5K_LED_AUTH: - led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND; - led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL; - break; - - case AR5K_LED_INIT: - led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE; - led_5210 = AR5K_PCICFG_LED_PEND; - break; - - case AR5K_LED_ASSOC: - case AR5K_LED_RUN: - led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC; - led_5210 = AR5K_PCICFG_LED_ASSOC; - break; - - default: - led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE; - led_5210 = AR5K_PCICFG_LED_PEND; - break; - } - - /*Write new status to the register*/ - if (ah->ah_version != AR5K_AR5210) - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led); - else - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210); -} - -/* - * Set GPIO inputs - */ -int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) -{ - ATH5K_TRACE(ah->ah_sc); - if (gpio > AR5K_NUM_GPIO) - return -EINVAL; - - ath5k_hw_reg_write(ah, - (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio)) - | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR); - - return 0; -} - -/* - * Set GPIO outputs - */ -int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) -{ - ATH5K_TRACE(ah->ah_sc); - if (gpio > AR5K_NUM_GPIO) - return -EINVAL; - - ath5k_hw_reg_write(ah, - (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio)) - | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR); - - return 0; -} - -/* - * Get GPIO state - */ -u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) -{ - ATH5K_TRACE(ah->ah_sc); - if (gpio > AR5K_NUM_GPIO) - return 0xffffffff; - - /* GPIO input magic */ - return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) & - 0x1; -} - -/* - * Set GPIO state - */ -int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) -{ - u32 data; - ATH5K_TRACE(ah->ah_sc); - - if (gpio > AR5K_NUM_GPIO) - return -EINVAL; - - /* GPIO output magic */ - data = ath5k_hw_reg_read(ah, AR5K_GPIODO); - - data &= ~(1 << gpio); - data |= (val & 1) << gpio; - - ath5k_hw_reg_write(ah, data, AR5K_GPIODO); - - return 0; -} - -/* - * Initialize the GPIO interrupt (RFKill switch) - */ -void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, - u32 interrupt_level) -{ - u32 data; - - ATH5K_TRACE(ah->ah_sc); - if (gpio > AR5K_NUM_GPIO) - return; - - /* - * Set the GPIO interrupt - */ - data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & - ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH | - AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) | - (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA); - - ath5k_hw_reg_write(ah, interrupt_level ? data : - (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR); - - ah->ah_imr |= AR5K_IMR_GPIO; - - /* Enable GPIO interrupts */ - AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO); -} - diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c deleted file mode 100644 index 450bd6e945f..00000000000 --- a/drivers/net/wireless/ath5k/initvals.c +++ /dev/null @@ -1,1810 +0,0 @@ -/* - * Initial register settings functions - * - * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "ath5k.h" -#include "reg.h" -#include "debug.h" -#include "base.h" - -/* - * Mode-independent initial register writes - */ - -struct ath5k_ini { - u16 ini_register; - u32 ini_value; - - enum { - AR5K_INI_WRITE = 0, /* Default */ - AR5K_INI_READ = 1, /* Cleared on read */ - } ini_mode; -}; - -/* - * Mode specific initial register values - */ - -struct ath5k_ini_mode { - u16 mode_register; - u32 mode_value[5]; -}; - -/* Initial register settings for AR5210 */ -static const struct ath5k_ini ar5210_ini[] = { - /* PCU and MAC registers */ - { AR5K_NOQCU_TXDP0, 0 }, - { AR5K_NOQCU_TXDP1, 0 }, - { AR5K_RXDP, 0 }, - { AR5K_CR, 0 }, - { AR5K_ISR, 0, AR5K_INI_READ }, - { AR5K_IMR, 0 }, - { AR5K_IER, AR5K_IER_DISABLE }, - { AR5K_BSR, 0, AR5K_INI_READ }, - { AR5K_TXCFG, AR5K_DMASIZE_128B }, - { AR5K_RXCFG, AR5K_DMASIZE_128B }, - { AR5K_CFG, AR5K_INIT_CFG }, - { AR5K_TOPS, 8 }, - { AR5K_RXNOFRM, 8 }, - { AR5K_RPGTO, 0 }, - { AR5K_TXNOFRM, 0 }, - { AR5K_SFR, 0 }, - { AR5K_MIBC, 0 }, - { AR5K_MISC, 0 }, - { AR5K_RX_FILTER_5210, 0 }, - { AR5K_MCAST_FILTER0_5210, 0 }, - { AR5K_MCAST_FILTER1_5210, 0 }, - { AR5K_TX_MASK0, 0 }, - { AR5K_TX_MASK1, 0 }, - { AR5K_CLR_TMASK, 0 }, - { AR5K_TRIG_LVL, AR5K_TUNE_MIN_TX_FIFO_THRES }, - { AR5K_DIAG_SW_5210, 0 }, - { AR5K_RSSI_THR, AR5K_TUNE_RSSI_THRES }, - { AR5K_TSF_L32_5210, 0 }, - { AR5K_TIMER0_5210, 0 }, - { AR5K_TIMER1_5210, 0xffffffff }, - { AR5K_TIMER2_5210, 0xffffffff }, - { AR5K_TIMER3_5210, 1 }, - { AR5K_CFP_DUR_5210, 0 }, - { AR5K_CFP_PERIOD_5210, 0 }, - /* PHY registers */ - { AR5K_PHY(0), 0x00000047 }, - { AR5K_PHY_AGC, 0x00000000 }, - { AR5K_PHY(3), 0x09848ea6 }, - { AR5K_PHY(4), 0x3d32e000 }, - { AR5K_PHY(5), 0x0000076b }, - { AR5K_PHY_ACT, AR5K_PHY_ACT_DISABLE }, - { AR5K_PHY(8), 0x02020200 }, - { AR5K_PHY(9), 0x00000e0e }, - { AR5K_PHY(10), 0x0a020201 }, - { AR5K_PHY(11), 0x00036ffc }, - { AR5K_PHY(12), 0x00000000 }, - { AR5K_PHY(13), 0x00000e0e }, - { AR5K_PHY(14), 0x00000007 }, - { AR5K_PHY(15), 0x00020100 }, - { AR5K_PHY(16), 0x89630000 }, - { AR5K_PHY(17), 0x1372169c }, - { AR5K_PHY(18), 0x0018b633 }, - { AR5K_PHY(19), 0x1284613c }, - { AR5K_PHY(20), 0x0de8b8e0 }, - { AR5K_PHY(21), 0x00074859 }, - { AR5K_PHY(22), 0x7e80beba }, - { AR5K_PHY(23), 0x313a665e }, - { AR5K_PHY_AGCCTL, 0x00001d08 }, - { AR5K_PHY(25), 0x0001ce00 }, - { AR5K_PHY(26), 0x409a4190 }, - { AR5K_PHY(28), 0x0000000f }, - { AR5K_PHY(29), 0x00000080 }, - { AR5K_PHY(30), 0x00000004 }, - { AR5K_PHY(31), 0x00000018 }, /* 0x987c */ - { AR5K_PHY(64), 0x00000000 }, /* 0x9900 */ - { AR5K_PHY(65), 0x00000000 }, - { AR5K_PHY(66), 0x00000000 }, - { AR5K_PHY(67), 0x00800000 }, - { AR5K_PHY(68), 0x00000003 }, - /* BB gain table (64bytes) */ - { AR5K_BB_GAIN(0), 0x00000000 }, - { AR5K_BB_GAIN(1), 0x00000020 }, - { AR5K_BB_GAIN(2), 0x00000010 }, - { AR5K_BB_GAIN(3), 0x00000030 }, - { AR5K_BB_GAIN(4), 0x00000008 }, - { AR5K_BB_GAIN(5), 0x00000028 }, - { AR5K_BB_GAIN(6), 0x00000028 }, - { AR5K_BB_GAIN(7), 0x00000004 }, - { AR5K_BB_GAIN(8), 0x00000024 }, - { AR5K_BB_GAIN(9), 0x00000014 }, - { AR5K_BB_GAIN(10), 0x00000034 }, - { AR5K_BB_GAIN(11), 0x0000000c }, - { AR5K_BB_GAIN(12), 0x0000002c }, - { AR5K_BB_GAIN(13), 0x00000002 }, - { AR5K_BB_GAIN(14), 0x00000022 }, - { AR5K_BB_GAIN(15), 0x00000012 }, - { AR5K_BB_GAIN(16), 0x00000032 }, - { AR5K_BB_GAIN(17), 0x0000000a }, - { AR5K_BB_GAIN(18), 0x0000002a }, - { AR5K_BB_GAIN(19), 0x00000001 }, - { AR5K_BB_GAIN(20), 0x00000021 }, - { AR5K_BB_GAIN(21), 0x00000011 }, - { AR5K_BB_GAIN(22), 0x00000031 }, - { AR5K_BB_GAIN(23), 0x00000009 }, - { AR5K_BB_GAIN(24), 0x00000029 }, - { AR5K_BB_GAIN(25), 0x00000005 }, - { AR5K_BB_GAIN(26), 0x00000025 }, - { AR5K_BB_GAIN(27), 0x00000015 }, - { AR5K_BB_GAIN(28), 0x00000035 }, - { AR5K_BB_GAIN(29), 0x0000000d }, - { AR5K_BB_GAIN(30), 0x0000002d }, - { AR5K_BB_GAIN(31), 0x00000003 }, - { AR5K_BB_GAIN(32), 0x00000023 }, - { AR5K_BB_GAIN(33), 0x00000013 }, - { AR5K_BB_GAIN(34), 0x00000033 }, - { AR5K_BB_GAIN(35), 0x0000000b }, - { AR5K_BB_GAIN(36), 0x0000002b }, - { AR5K_BB_GAIN(37), 0x00000007 }, - { AR5K_BB_GAIN(38), 0x00000027 }, - { AR5K_BB_GAIN(39), 0x00000017 }, - { AR5K_BB_GAIN(40), 0x00000037 }, - { AR5K_BB_GAIN(41), 0x0000000f }, - { AR5K_BB_GAIN(42), 0x0000002f }, - { AR5K_BB_GAIN(43), 0x0000002f }, - { AR5K_BB_GAIN(44), 0x0000002f }, - { AR5K_BB_GAIN(45), 0x0000002f }, - { AR5K_BB_GAIN(46), 0x0000002f }, - { AR5K_BB_GAIN(47), 0x0000002f }, - { AR5K_BB_GAIN(48), 0x0000002f }, - { AR5K_BB_GAIN(49), 0x0000002f }, - { AR5K_BB_GAIN(50), 0x0000002f }, - { AR5K_BB_GAIN(51), 0x0000002f }, - { AR5K_BB_GAIN(52), 0x0000002f }, - { AR5K_BB_GAIN(53), 0x0000002f }, - { AR5K_BB_GAIN(54), 0x0000002f }, - { AR5K_BB_GAIN(55), 0x0000002f }, - { AR5K_BB_GAIN(56), 0x0000002f }, - { AR5K_BB_GAIN(57), 0x0000002f }, - { AR5K_BB_GAIN(58), 0x0000002f }, - { AR5K_BB_GAIN(59), 0x0000002f }, - { AR5K_BB_GAIN(60), 0x0000002f }, - { AR5K_BB_GAIN(61), 0x0000002f }, - { AR5K_BB_GAIN(62), 0x0000002f }, - { AR5K_BB_GAIN(63), 0x0000002f }, - /* 5110 RF gain table (64btes) */ - { AR5K_RF_GAIN(0), 0x0000001d }, - { AR5K_RF_GAIN(1), 0x0000005d }, - { AR5K_RF_GAIN(2), 0x0000009d }, - { AR5K_RF_GAIN(3), 0x000000dd }, - { AR5K_RF_GAIN(4), 0x0000011d }, - { AR5K_RF_GAIN(5), 0x00000021 }, - { AR5K_RF_GAIN(6), 0x00000061 }, - { AR5K_RF_GAIN(7), 0x000000a1 }, - { AR5K_RF_GAIN(8), 0x000000e1 }, - { AR5K_RF_GAIN(9), 0x00000031 }, - { AR5K_RF_GAIN(10), 0x00000071 }, - { AR5K_RF_GAIN(11), 0x000000b1 }, - { AR5K_RF_GAIN(12), 0x0000001c }, - { AR5K_RF_GAIN(13), 0x0000005c }, - { AR5K_RF_GAIN(14), 0x00000029 }, - { AR5K_RF_GAIN(15), 0x00000069 }, - { AR5K_RF_GAIN(16), 0x000000a9 }, - { AR5K_RF_GAIN(17), 0x00000020 }, - { AR5K_RF_GAIN(18), 0x00000019 }, - { AR5K_RF_GAIN(19), 0x00000059 }, - { AR5K_RF_GAIN(20), 0x00000099 }, - { AR5K_RF_GAIN(21), 0x00000030 }, - { AR5K_RF_GAIN(22), 0x00000005 }, - { AR5K_RF_GAIN(23), 0x00000025 }, - { AR5K_RF_GAIN(24), 0x00000065 }, - { AR5K_RF_GAIN(25), 0x000000a5 }, - { AR5K_RF_GAIN(26), 0x00000028 }, - { AR5K_RF_GAIN(27), 0x00000068 }, - { AR5K_RF_GAIN(28), 0x0000001f }, - { AR5K_RF_GAIN(29), 0x0000001e }, - { AR5K_RF_GAIN(30), 0x00000018 }, - { AR5K_RF_GAIN(31), 0x00000058 }, - { AR5K_RF_GAIN(32), 0x00000098 }, - { AR5K_RF_GAIN(33), 0x00000003 }, - { AR5K_RF_GAIN(34), 0x00000004 }, - { AR5K_RF_GAIN(35), 0x00000044 }, - { AR5K_RF_GAIN(36), 0x00000084 }, - { AR5K_RF_GAIN(37), 0x00000013 }, - { AR5K_RF_GAIN(38), 0x00000012 }, - { AR5K_RF_GAIN(39), 0x00000052 }, - { AR5K_RF_GAIN(40), 0x00000092 }, - { AR5K_RF_GAIN(41), 0x000000d2 }, - { AR5K_RF_GAIN(42), 0x0000002b }, - { AR5K_RF_GAIN(43), 0x0000002a }, - { AR5K_RF_GAIN(44), 0x0000006a }, - { AR5K_RF_GAIN(45), 0x000000aa }, - { AR5K_RF_GAIN(46), 0x0000001b }, - { AR5K_RF_GAIN(47), 0x0000001a }, - { AR5K_RF_GAIN(48), 0x0000005a }, - { AR5K_RF_GAIN(49), 0x0000009a }, - { AR5K_RF_GAIN(50), 0x000000da }, - { AR5K_RF_GAIN(51), 0x00000006 }, - { AR5K_RF_GAIN(52), 0x00000006 }, - { AR5K_RF_GAIN(53), 0x00000006 }, - { AR5K_RF_GAIN(54), 0x00000006 }, - { AR5K_RF_GAIN(55), 0x00000006 }, - { AR5K_RF_GAIN(56), 0x00000006 }, - { AR5K_RF_GAIN(57), 0x00000006 }, - { AR5K_RF_GAIN(58), 0x00000006 }, - { AR5K_RF_GAIN(59), 0x00000006 }, - { AR5K_RF_GAIN(60), 0x00000006 }, - { AR5K_RF_GAIN(61), 0x00000006 }, - { AR5K_RF_GAIN(62), 0x00000006 }, - { AR5K_RF_GAIN(63), 0x00000006 }, - /* PHY activation */ - { AR5K_PHY(53), 0x00000020 }, - { AR5K_PHY(51), 0x00000004 }, - { AR5K_PHY(50), 0x00060106 }, - { AR5K_PHY(39), 0x0000006d }, - { AR5K_PHY(48), 0x00000000 }, - { AR5K_PHY(52), 0x00000014 }, - { AR5K_PHY_ACT, AR5K_PHY_ACT_ENABLE }, -}; - -/* Initial register settings for AR5211 */ -static const struct ath5k_ini ar5211_ini[] = { - { AR5K_RXDP, 0x00000000 }, - { AR5K_RTSD0, 0x84849c9c }, - { AR5K_RTSD1, 0x7c7c7c7c }, - { AR5K_RXCFG, 0x00000005 }, - { AR5K_MIBC, 0x00000000 }, - { AR5K_TOPS, 0x00000008 }, - { AR5K_RXNOFRM, 0x00000008 }, - { AR5K_TXNOFRM, 0x00000010 }, - { AR5K_RPGTO, 0x00000000 }, - { AR5K_RFCNT, 0x0000001f }, - { AR5K_QUEUE_TXDP(0), 0x00000000 }, - { AR5K_QUEUE_TXDP(1), 0x00000000 }, - { AR5K_QUEUE_TXDP(2), 0x00000000 }, - { AR5K_QUEUE_TXDP(3), 0x00000000 }, - { AR5K_QUEUE_TXDP(4), 0x00000000 }, - { AR5K_QUEUE_TXDP(5), 0x00000000 }, - { AR5K_QUEUE_TXDP(6), 0x00000000 }, - { AR5K_QUEUE_TXDP(7), 0x00000000 }, - { AR5K_QUEUE_TXDP(8), 0x00000000 }, - { AR5K_QUEUE_TXDP(9), 0x00000000 }, - { AR5K_DCU_FP, 0x00000000 }, - { AR5K_STA_ID1, 0x00000000 }, - { AR5K_BSS_ID0, 0x00000000 }, - { AR5K_BSS_ID1, 0x00000000 }, - { AR5K_RSSI_THR, 0x00000000 }, - { AR5K_CFP_PERIOD_5211, 0x00000000 }, - { AR5K_TIMER0_5211, 0x00000030 }, - { AR5K_TIMER1_5211, 0x0007ffff }, - { AR5K_TIMER2_5211, 0x01ffffff }, - { AR5K_TIMER3_5211, 0x00000031 }, - { AR5K_CFP_DUR_5211, 0x00000000 }, - { AR5K_RX_FILTER_5211, 0x00000000 }, - { AR5K_MCAST_FILTER0_5211, 0x00000000 }, - { AR5K_MCAST_FILTER1_5211, 0x00000002 }, - { AR5K_DIAG_SW_5211, 0x00000000 }, - { AR5K_ADDAC_TEST, 0x00000000 }, - { AR5K_DEFAULT_ANTENNA, 0x00000000 }, - /* PHY registers */ - { AR5K_PHY_AGC, 0x00000000 }, - { AR5K_PHY(3), 0x2d849093 }, - { AR5K_PHY(4), 0x7d32e000 }, - { AR5K_PHY(5), 0x00000f6b }, - { AR5K_PHY_ACT, 0x00000000 }, - { AR5K_PHY(11), 0x00026ffe }, - { AR5K_PHY(12), 0x00000000 }, - { AR5K_PHY(15), 0x00020100 }, - { AR5K_PHY(16), 0x206a017a }, - { AR5K_PHY(19), 0x1284613c }, - { AR5K_PHY(21), 0x00000859 }, - { AR5K_PHY(26), 0x409a4190 }, /* 0x9868 */ - { AR5K_PHY(27), 0x050cb081 }, - { AR5K_PHY(28), 0x0000000f }, - { AR5K_PHY(29), 0x00000080 }, - { AR5K_PHY(30), 0x0000000c }, - { AR5K_PHY(64), 0x00000000 }, - { AR5K_PHY(65), 0x00000000 }, - { AR5K_PHY(66), 0x00000000 }, - { AR5K_PHY(67), 0x00800000 }, - { AR5K_PHY(68), 0x00000001 }, - { AR5K_PHY(71), 0x0000092a }, - { AR5K_PHY_IQ, 0x00000000 }, - { AR5K_PHY(73), 0x00058a05 }, - { AR5K_PHY(74), 0x00000001 }, - { AR5K_PHY(75), 0x00000000 }, - { AR5K_PHY_PAPD_PROBE, 0x00000000 }, - { AR5K_PHY(77), 0x00000000 }, /* 0x9934 */ - { AR5K_PHY(78), 0x00000000 }, /* 0x9938 */ - { AR5K_PHY(79), 0x0000003f }, /* 0x993c */ - { AR5K_PHY(80), 0x00000004 }, - { AR5K_PHY(82), 0x00000000 }, - { AR5K_PHY(83), 0x00000000 }, - { AR5K_PHY(84), 0x00000000 }, - { AR5K_PHY_RADAR, 0x5d50f14c }, - { AR5K_PHY(86), 0x00000018 }, - { AR5K_PHY(87), 0x004b6a8e }, - /* Initial Power table (32bytes) - * common on all cards/modes. - * Note: Table is rewritten during - * txpower setup later using calibration - * data etc. so next write is non-common - { AR5K_PHY_PCDAC_TXPOWER(1), 0x06ff05ff }, - { AR5K_PHY_PCDAC_TXPOWER(2), 0x07ff07ff }, - { AR5K_PHY_PCDAC_TXPOWER(3), 0x08ff08ff }, - { AR5K_PHY_PCDAC_TXPOWER(4), 0x09ff09ff }, - { AR5K_PHY_PCDAC_TXPOWER(5), 0x0aff0aff }, - { AR5K_PHY_PCDAC_TXPOWER(6), 0x0bff0bff }, - { AR5K_PHY_PCDAC_TXPOWER(7), 0x0cff0cff }, - { AR5K_PHY_PCDAC_TXPOWER(8), 0x0dff0dff }, - { AR5K_PHY_PCDAC_TXPOWER(9), 0x0fff0eff }, - { AR5K_PHY_PCDAC_TXPOWER(10), 0x12ff12ff }, - { AR5K_PHY_PCDAC_TXPOWER(11), 0x14ff13ff }, - { AR5K_PHY_PCDAC_TXPOWER(12), 0x16ff15ff }, - { AR5K_PHY_PCDAC_TXPOWER(13), 0x19ff17ff }, - { AR5K_PHY_PCDAC_TXPOWER(14), 0x1bff1aff }, - { AR5K_PHY_PCDAC_TXPOWER(15), 0x1eff1dff }, - { AR5K_PHY_PCDAC_TXPOWER(16), 0x23ff20ff }, - { AR5K_PHY_PCDAC_TXPOWER(17), 0x27ff25ff }, - { AR5K_PHY_PCDAC_TXPOWER(18), 0x2cff29ff }, - { AR5K_PHY_PCDAC_TXPOWER(19), 0x31ff2fff }, - { AR5K_PHY_PCDAC_TXPOWER(20), 0x37ff34ff }, - { AR5K_PHY_PCDAC_TXPOWER(21), 0x3aff3aff }, - { AR5K_PHY_PCDAC_TXPOWER(22), 0x3aff3aff }, - { AR5K_PHY_PCDAC_TXPOWER(23), 0x3aff3aff }, - { AR5K_PHY_PCDAC_TXPOWER(24), 0x3aff3aff }, - { AR5K_PHY_PCDAC_TXPOWER(25), 0x3aff3aff }, - { AR5K_PHY_PCDAC_TXPOWER(26), 0x3aff3aff }, - { AR5K_PHY_PCDAC_TXPOWER(27), 0x3aff3aff }, - { AR5K_PHY_PCDAC_TXPOWER(28), 0x3aff3aff }, - { AR5K_PHY_PCDAC_TXPOWER(29), 0x3aff3aff }, - { AR5K_PHY_PCDAC_TXPOWER(30), 0x3aff3aff }, - { AR5K_PHY_PCDAC_TXPOWER(31), 0x3aff3aff },*/ - { AR5K_PHY_CCKTXCTL, 0x00000000 }, - { AR5K_PHY(642), 0x503e4646 }, - { AR5K_PHY_GAIN_2GHZ, 0x6480416c }, - { AR5K_PHY(644), 0x0199a003 }, - { AR5K_PHY(645), 0x044cd610 }, - { AR5K_PHY(646), 0x13800040 }, - { AR5K_PHY(647), 0x1be00060 }, - { AR5K_PHY(648), 0x0c53800a }, - { AR5K_PHY(649), 0x0014df3b }, - { AR5K_PHY(650), 0x000001b5 }, - { AR5K_PHY(651), 0x00000020 }, -}; - -/* Initial mode-specific settings for AR5211 - * XXX: how about g / gTurbo ? RF5111 supports it, how about AR5211 ? - * Maybe 5211 supports OFDM-only g but we need to test it ! - */ -static const struct ath5k_ini_mode ar5211_ini_mode[] = { - { AR5K_TXCFG, - /* a aTurbo b */ - { 0x00000015, 0x00000015, 0x0000001d } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(0), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(1), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(2), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(3), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(4), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(5), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(6), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(7), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(8), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(9), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, - { AR5K_DCU_GBL_IFS_SLOT, - { 0x00000168, 0x000001e0, 0x000001b8 } }, - { AR5K_DCU_GBL_IFS_SIFS, - { 0x00000230, 0x000001e0, 0x000000b0 } }, - { AR5K_DCU_GBL_IFS_EIFS, - { 0x00000d98, 0x00001180, 0x00001f48 } }, - { AR5K_DCU_GBL_IFS_MISC, - { 0x0000a0e0, 0x00014068, 0x00005880 } }, - { AR5K_TIME_OUT, - { 0x04000400, 0x08000800, 0x20003000 } }, - { AR5K_USEC_5211, - { 0x0e8d8fa7, 0x0e8d8fcf, 0x01608f95 } }, - { AR5K_PHY_TURBO, - { 0x00000000, 0x00000003, 0x00000000 } }, - { AR5K_PHY(8), - { 0x02020200, 0x02020200, 0x02010200 } }, - { AR5K_PHY(9), - { 0x00000e0e, 0x00000e0e, 0x00000707 } }, - { AR5K_PHY(10), - { 0x0a020001, 0x0a020001, 0x05010000 } }, - { AR5K_PHY(13), - { 0x00000e0e, 0x00000e0e, 0x00000e0e } }, - { AR5K_PHY(14), - { 0x00000007, 0x00000007, 0x0000000b } }, - { AR5K_PHY(17), - { 0x1372169c, 0x137216a5, 0x137216a8 } }, - { AR5K_PHY(18), - { 0x0018ba67, 0x0018ba67, 0x0018ba69 } }, - { AR5K_PHY(20), - { 0x0c28b4e0, 0x0c28b4e0, 0x0c28b4e0 } }, - { AR5K_PHY_SIG, - { 0x7e800d2e, 0x7e800d2e, 0x7ec00d2e } }, - { AR5K_PHY_AGCCOARSE, - { 0x31375d5e, 0x31375d5e, 0x313a5d5e } }, - { AR5K_PHY_AGCCTL, - { 0x0000bd10, 0x0000bd10, 0x0000bd38 } }, - { AR5K_PHY_NF, - { 0x0001ce00, 0x0001ce00, 0x0001ce00 } }, - { AR5K_PHY_RX_DELAY, - { 0x00002710, 0x00002710, 0x0000157c } }, - { AR5K_PHY(70), - { 0x00000190, 0x00000190, 0x00000084 } }, - { AR5K_PHY_FRAME_CTL_5211, - { 0x6fe01020, 0x6fe01020, 0x6fe00920 } }, - { AR5K_PHY_PCDAC_TXPOWER_BASE_5211, - { 0x05ff14ff, 0x05ff14ff, 0x05ff14ff } }, - { AR5K_RF_BUFFER_CONTROL_4, - { 0x00000010, 0x00000014, 0x00000010 } }, -}; - -/* Initial register settings for AR5212 */ -static const struct ath5k_ini ar5212_ini[] = { - { AR5K_RXDP, 0x00000000 }, - { AR5K_RXCFG, 0x00000005 }, - { AR5K_MIBC, 0x00000000 }, - { AR5K_TOPS, 0x00000008 }, - { AR5K_RXNOFRM, 0x00000008 }, - { AR5K_TXNOFRM, 0x00000010 }, - { AR5K_RPGTO, 0x00000000 }, - { AR5K_RFCNT, 0x0000001f }, - { AR5K_QUEUE_TXDP(0), 0x00000000 }, - { AR5K_QUEUE_TXDP(1), 0x00000000 }, - { AR5K_QUEUE_TXDP(2), 0x00000000 }, - { AR5K_QUEUE_TXDP(3), 0x00000000 }, - { AR5K_QUEUE_TXDP(4), 0x00000000 }, - { AR5K_QUEUE_TXDP(5), 0x00000000 }, - { AR5K_QUEUE_TXDP(6), 0x00000000 }, - { AR5K_QUEUE_TXDP(7), 0x00000000 }, - { AR5K_QUEUE_TXDP(8), 0x00000000 }, - { AR5K_QUEUE_TXDP(9), 0x00000000 }, - { AR5K_DCU_FP, 0x00000000 }, - { AR5K_DCU_TXP, 0x00000000 }, - { AR5K_DCU_TX_FILTER_0_BASE, 0x00000000 }, - /* Unknown table */ - { 0x1078, 0x00000000 }, - { 0x10b8, 0x00000000 }, - { 0x10f8, 0x00000000 }, - { 0x1138, 0x00000000 }, - { 0x1178, 0x00000000 }, - { 0x11b8, 0x00000000 }, - { 0x11f8, 0x00000000 }, - { 0x1238, 0x00000000 }, - { 0x1278, 0x00000000 }, - { 0x12b8, 0x00000000 }, - { 0x12f8, 0x00000000 }, - { 0x1338, 0x00000000 }, - { 0x1378, 0x00000000 }, - { 0x13b8, 0x00000000 }, - { 0x13f8, 0x00000000 }, - { 0x1438, 0x00000000 }, - { 0x1478, 0x00000000 }, - { 0x14b8, 0x00000000 }, - { 0x14f8, 0x00000000 }, - { 0x1538, 0x00000000 }, - { 0x1578, 0x00000000 }, - { 0x15b8, 0x00000000 }, - { 0x15f8, 0x00000000 }, - { 0x1638, 0x00000000 }, - { 0x1678, 0x00000000 }, - { 0x16b8, 0x00000000 }, - { 0x16f8, 0x00000000 }, - { 0x1738, 0x00000000 }, - { 0x1778, 0x00000000 }, - { 0x17b8, 0x00000000 }, - { 0x17f8, 0x00000000 }, - { 0x103c, 0x00000000 }, - { 0x107c, 0x00000000 }, - { 0x10bc, 0x00000000 }, - { 0x10fc, 0x00000000 }, - { 0x113c, 0x00000000 }, - { 0x117c, 0x00000000 }, - { 0x11bc, 0x00000000 }, - { 0x11fc, 0x00000000 }, - { 0x123c, 0x00000000 }, - { 0x127c, 0x00000000 }, - { 0x12bc, 0x00000000 }, - { 0x12fc, 0x00000000 }, - { 0x133c, 0x00000000 }, - { 0x137c, 0x00000000 }, - { 0x13bc, 0x00000000 }, - { 0x13fc, 0x00000000 }, - { 0x143c, 0x00000000 }, - { 0x147c, 0x00000000 }, - { AR5K_DCU_TX_FILTER_CLR, 0x00000000 }, - { AR5K_DCU_TX_FILTER_SET, 0x00000000 }, - { AR5K_STA_ID1, 0x00000000 }, - { AR5K_BSS_ID0, 0x00000000 }, - { AR5K_BSS_ID1, 0x00000000 }, - /*{ AR5K_RSSI_THR, 0x00000000 },*/ /* Found on SuperAG cards */ - { AR5K_BEACON_5211, 0x00000000 }, /* Found on SuperAG cards */ - { AR5K_CFP_PERIOD_5211, 0x00000000 }, /* Found on SuperAG cards */ - { AR5K_TIMER0_5211, 0x00000030 }, /* Found on SuperAG cards */ - { AR5K_TIMER1_5211, 0x0007ffff }, /* Found on SuperAG cards */ - { AR5K_TIMER2_5211, 0x01ffffff }, /* Found on SuperAG cards */ - { AR5K_TIMER3_5211, 0x00000031 }, /* Found on SuperAG cards */ - { AR5K_CFP_DUR_5211, 0x00000000 }, /* Found on SuperAG cards */ - { AR5K_RX_FILTER_5211, 0x00000000 }, - { AR5K_DIAG_SW_5211, 0x00000000 }, - { AR5K_ADDAC_TEST, 0x00000000 }, - { AR5K_DEFAULT_ANTENNA, 0x00000000 }, - { 0x8080, 0x00000000 }, - /*{ 0x805c, 0xffffc7ff },*/ /* Old value */ - { 0x805c, 0x000fc78f }, - { AR5K_NAV_5211, 0x00000000 }, /* Not found on recent */ - { AR5K_RTS_OK_5211, 0x00000000 }, /* dumps but it makes */ - { AR5K_RTS_FAIL_5211, 0x00000000 }, /* sense to reset counters */ - { AR5K_ACK_FAIL_5211, 0x00000000 }, /* since pcu registers */ - { AR5K_FCS_FAIL_5211, 0x00000000 }, /* are skiped during chan*/ - { AR5K_BEACON_CNT_5211, 0x00000000 }, /* change */ - { AR5K_XRMODE, 0x2a82301a }, - { AR5K_XRDELAY, 0x05dc01e0 }, - { AR5K_XRTIMEOUT, 0x1f402710 }, - { AR5K_XRCHIRP, 0x01f40000 }, - { AR5K_XRSTOMP, 0x00001e1c }, - { AR5K_SLEEP0, 0x0002aaaa }, /* Found on SuperAG cards */ - { AR5K_SLEEP1, 0x02005555 }, /* Found on SuperAG cards */ - { AR5K_SLEEP2, 0x00000000 }, /* Found on SuperAG cards */ - { AR5K_BSS_IDM0, 0xffffffff }, - { AR5K_BSS_IDM1, 0x0000ffff }, - { AR5K_TXPC, 0x00000000 }, - { AR5K_PROFCNT_TX, 0x00000000 }, - { AR5K_PROFCNT_RX, 0x00000000 }, - { AR5K_PROFCNT_RXCLR, 0x00000000 }, - { AR5K_PROFCNT_CYCLE, 0x00000000 }, - { 0x80fc, 0x00000088 }, - { AR5K_RATE_DUR(0), 0x00000000 }, - { AR5K_RATE_DUR(1), 0x0000008c }, - { AR5K_RATE_DUR(2), 0x000000e4 }, - { AR5K_RATE_DUR(3), 0x000002d5 }, - { AR5K_RATE_DUR(4), 0x00000000 }, - { AR5K_RATE_DUR(5), 0x00000000 }, - { AR5K_RATE_DUR(6), 0x000000a0 }, - { AR5K_RATE_DUR(7), 0x000001c9 }, - { AR5K_RATE_DUR(8), 0x0000002c }, - { AR5K_RATE_DUR(9), 0x0000002c }, - { AR5K_RATE_DUR(10), 0x00000030 }, - { AR5K_RATE_DUR(11), 0x0000003c }, - { AR5K_RATE_DUR(12), 0x0000002c }, - { AR5K_RATE_DUR(13), 0x0000002c }, - { AR5K_RATE_DUR(14), 0x00000030 }, - { AR5K_RATE_DUR(15), 0x0000003c }, - { AR5K_RATE_DUR(16), 0x00000000 }, - { AR5K_RATE_DUR(17), 0x00000000 }, - { AR5K_RATE_DUR(18), 0x00000000 }, - { AR5K_RATE_DUR(19), 0x00000000 }, - { AR5K_RATE_DUR(20), 0x00000000 }, - { AR5K_RATE_DUR(21), 0x00000000 }, - { AR5K_RATE_DUR(22), 0x00000000 }, - { AR5K_RATE_DUR(23), 0x00000000 }, - { AR5K_RATE_DUR(24), 0x000000d5 }, - { AR5K_RATE_DUR(25), 0x000000df }, - { AR5K_RATE_DUR(26), 0x00000102 }, - { AR5K_RATE_DUR(27), 0x0000013a }, - { AR5K_RATE_DUR(28), 0x00000075 }, - { AR5K_RATE_DUR(29), 0x0000007f }, - { AR5K_RATE_DUR(30), 0x000000a2 }, - { AR5K_RATE_DUR(31), 0x00000000 }, - { 0x8100, 0x00010002}, - { AR5K_TSF_PARM, 0x00000001 }, - { 0x8108, 0x000000c0 }, - { AR5K_PHY_ERR_FIL, 0x00000000 }, - { 0x8110, 0x00000168 }, - { 0x8114, 0x00000000 }, - /* Some kind of table - * also notice ...03<-02<-01<-00) */ - { 0x87c0, 0x03020100 }, - { 0x87c4, 0x07060504 }, - { 0x87c8, 0x0b0a0908 }, - { 0x87cc, 0x0f0e0d0c }, - { 0x87d0, 0x13121110 }, - { 0x87d4, 0x17161514 }, - { 0x87d8, 0x1b1a1918 }, - { 0x87dc, 0x1f1e1d1c }, - /* loop ? */ - { 0x87e0, 0x03020100 }, - { 0x87e4, 0x07060504 }, - { 0x87e8, 0x0b0a0908 }, - { 0x87ec, 0x0f0e0d0c }, - { 0x87f0, 0x13121110 }, - { 0x87f4, 0x17161514 }, - { 0x87f8, 0x1b1a1918 }, - { 0x87fc, 0x1f1e1d1c }, - /* PHY registers */ - /*{ AR5K_PHY_AGC, 0x00000000 },*/ - { AR5K_PHY(3), 0xad848e19 }, - { AR5K_PHY(4), 0x7d28e000 }, - { AR5K_PHY_TIMING_3, 0x9c0a9f6b }, - { AR5K_PHY_ACT, 0x00000000 }, - /*{ AR5K_PHY(11), 0x00022ffe },*/ - /*{ AR5K_PHY(15), 0x00020100 },*/ - { AR5K_PHY(16), 0x206a017a }, - /*{ AR5K_PHY(19), 0x1284613c },*/ - { AR5K_PHY(21), 0x00000859 }, - { AR5K_PHY(64), 0x00000000 }, - { AR5K_PHY(65), 0x00000000 }, - { AR5K_PHY(66), 0x00000000 }, - { AR5K_PHY(67), 0x00800000 }, - { AR5K_PHY(68), 0x00000001 }, - /*{ AR5K_PHY(71), 0x0000092a },*/ /* Old value */ - { AR5K_PHY(71), 0x00000c80 }, - { AR5K_PHY_IQ, 0x05100000 }, - { AR5K_PHY(74), 0x00000001 }, - { AR5K_PHY(75), 0x00000004 }, - { AR5K_PHY_TXPOWER_RATE1, 0x1e1f2022 }, - { AR5K_PHY_TXPOWER_RATE2, 0x0a0b0c0d }, - { AR5K_PHY_TXPOWER_RATE_MAX, 0x0000003f }, - /*{ AR5K_PHY(80), 0x00000004 },*/ - { AR5K_PHY(82), 0x9280b212 }, - { AR5K_PHY_RADAR, 0x5d50e188 }, - /*{ AR5K_PHY(86), 0x000000ff },*/ - { AR5K_PHY(87), 0x004b6a8e }, - { AR5K_PHY(90), 0x000003ce }, - { AR5K_PHY(92), 0x192fb515 }, - /*{ AR5K_PHY(93), 0x00000000 },*/ - { AR5K_PHY(94), 0x00000001 }, - { AR5K_PHY(95), 0x00000000 }, - /*{ AR5K_PHY(644), 0x0080a333 },*/ /* Old value */ - /*{ AR5K_PHY(645), 0x00206c10 },*/ /* Old value */ - { AR5K_PHY(644), 0x00806333 }, - { AR5K_PHY(645), 0x00106c10 }, - { AR5K_PHY(646), 0x009c4060 }, - { AR5K_PHY(647), 0x1483800a }, - /* { AR5K_PHY(648), 0x018830c6 },*/ /* 2413/2425 */ - { AR5K_PHY(648), 0x01831061 }, - { AR5K_PHY(649), 0x00000400 }, - /*{ AR5K_PHY(650), 0x000001b5 },*/ - { AR5K_PHY(651), 0x00000000 }, - { AR5K_PHY_TXPOWER_RATE3, 0x20202020 }, - { AR5K_PHY_TXPOWER_RATE2, 0x20202020 }, - /*{ AR5K_PHY(655), 0x13c889af },*/ - { AR5K_PHY(656), 0x38490a20 }, - { AR5K_PHY(657), 0x00007bb6 }, - { AR5K_PHY(658), 0x0fff3ffc }, - /*{ AR5K_PHY_CCKTXCTL, 0x00000000 },*/ -}; - -/* Initial mode-specific settings for AR5212 (Written before ar5212_ini) */ -static const struct ath5k_ini_mode ar5212_ini_mode_start[] = { - { AR5K_PHY(640), - /* a/XR aTurbo b g (DYN) gTurbo */ - { 0x00000008, 0x00000008, 0x0000000b, 0x0000000e, 0x0000000e } }, - { AR5K_PHY(0), - { 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(0), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(1), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(2), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(3), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(4), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(5), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(6), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(7), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(8), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, - { AR5K_QUEUE_DFS_LOCAL_IFS(9), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, - { AR5K_DCU_GBL_IFS_SIFS, - { 0x00000230, 0x000001e0, 0x000000b0, 0x00000160, 0x000001e0 } }, - { AR5K_DCU_GBL_IFS_SLOT, - { 0x00000168, 0x000001e0, 0x000001b8, 0x0000018c, 0x000001e0 } }, - { AR5K_DCU_GBL_IFS_EIFS, - { 0x00000e60, 0x00001180, 0x00001f1c, 0x00003e38, 0x00001180 } }, - { AR5K_DCU_GBL_IFS_MISC, - { 0x0000a0e0, 0x00014068, 0x00005880, 0x0000b0e0, 0x00014068 } }, - { AR5K_TIME_OUT, - { 0x03e803e8, 0x06e006e0, 0x04200420, 0x08400840, 0x06e006e0 } }, - { AR5K_PHY_TURBO, - { 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x00000003 } }, - { AR5K_PHY(8), - { 0x02020200, 0x02020200, 0x02010200, 0x02020200, 0x02020200 } }, - { AR5K_PHY(9), - { 0x00000e0e, 0x00000e0e, 0x00000707, 0x00000e0e, 0x00000e0e } }, - { AR5K_PHY(17), - { 0x1372161c, 0x13721c25, 0x13721722, 0x137216a2, 0x13721c25 } }, - { AR5K_PHY_AGCCTL, - { 0x00009d10, 0x00009d10, 0x00009d18, 0x00009d18, 0x00009d18 } }, - { AR5K_PHY_NF, - { 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 } }, - { AR5K_PHY(26), - { 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190 } }, - { AR5K_PHY(70), - { 0x000001b8, 0x000001b8, 0x00000084, 0x00000108, 0x000001b8 } }, - { AR5K_PHY(73), - { 0x10058a05, 0x10058a05, 0x10058a05, 0x10058a05, 0x10058a05 } }, - { 0xa230, - { 0x00000000, 0x00000000, 0x00000000, 0x00000108, 0x00000000 } }, -}; - -/* Initial mode-specific settings for AR5212 + RF5111 (Written after ar5212_ini) */ -/* New dump pending */ -static const struct ath5k_ini_mode ar5212_rf5111_ini_mode_end[] = { - { AR5K_PHY(640), /* This one differs from ar5212_ini_mode_start ! */ - /* a/XR aTurbo b g (DYN) gTurbo */ - { 0x00000000, 0x00000000, 0x00000003, 0x00000006, 0x00000006 } }, - { AR5K_TXCFG, - { 0x00008015, 0x00008015, 0x00008015, 0x00008015, 0x00008015 } }, - { AR5K_USEC_5211, - { 0x128d8fa7, 0x09880fcf, 0x04e00f95, 0x12e00fab, 0x09880fcf } }, - { AR5K_PHY(10), - { 0x0a020001, 0x0a020001, 0x05010100, 0x0a020001, 0x0a020001 } }, - { AR5K_PHY(13), - { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } }, - { AR5K_PHY(14), - { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } }, - { AR5K_PHY(18), - { 0x0018da5a, 0x0018da5a, 0x0018ca69, 0x0018ca69, 0x0018ca69 } }, - { AR5K_PHY(20), - { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } }, - { AR5K_PHY_SIG, - { 0x7e800d2e, 0x7e800d2e, 0x7ee84d2e, 0x7ee84d2e, 0x7e800d2e } }, - { AR5K_PHY_AGCCOARSE, - { 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e, 0x3137615e } }, - { AR5K_PHY(27), - { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb080, 0x050cb080 } }, - { AR5K_PHY_RX_DELAY, - { 0x00002710, 0x00002710, 0x0000157c, 0x00002af8, 0x00002710 } }, - { AR5K_PHY_FRAME_CTL_5211, - { 0xf7b81020, 0xf7b81020, 0xf7b80d20, 0xf7b81020, 0xf7b81020 } }, - { AR5K_PHY_GAIN_2GHZ, - { 0x642c416a, 0x642c416a, 0x6440416a, 0x6440416a, 0x6440416a } }, - { 0xa21c, - { 0x1883800a, 0x1883800a, 0x1873800a, 0x1883800a, 0x1883800a } }, - { AR5K_DCU_FP, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY_AGC, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY(11), - { 0x00022ffe, 0x00022ffe, 0x00022ffe, 0x00022ffe, 0x00022ffe } }, - { AR5K_PHY(15), - { 0x00020100, 0x00020100, 0x00020100, 0x00020100, 0x00020100 } }, - { AR5K_PHY(19), - { 0x1284613c, 0x1284613c, 0x1284613c, 0x1284613c, 0x1284613c } }, - { AR5K_PHY_PAPD_PROBE, - { 0x00004883, 0x00004883, 0x00004883, 0x00004883, 0x00004883 } }, - { AR5K_PHY(80), - { 0x00000004, 0x00000004, 0x00000004, 0x00000004, 0x00000004 } }, - { AR5K_PHY(86), - { 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff } }, - { AR5K_PHY(93), - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY_SPENDING, - { 0x00000018, 0x00000018, 0x00000018, 0x00000018, 0x00000018 } }, - { AR5K_PHY_CCKTXCTL, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY(642), - { 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, - { 0xa228, - { 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5 } }, - { 0xa23c, - { 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af } }, -}; - -/* Initial mode-specific settings for AR5212 + RF5112 (Written after ar5212_ini) */ -/* XXX: No dumps for turbog yet, but i found settings from old values so it should be ok */ -static const struct ath5k_ini_mode ar5212_rf5112_ini_mode_end[] = { - { AR5K_TXCFG, - /* a/XR aTurbo b g (DYN) gTurbo */ - { 0x00008015, 0x00008015, 0x00008015, 0x00008015, 0x00008015 } }, - { AR5K_USEC_5211, - { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } }, - { AR5K_PHY(10), - { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } }, - { AR5K_PHY(13), - { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } }, - { AR5K_PHY(14), - { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } }, - { AR5K_PHY(18), - { 0x0018da6d, 0x0018da6d, 0x0018ca75, 0x0018ca75, 0x0018ca75 } }, - { AR5K_PHY(20), - { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } }, - { AR5K_PHY_SIG, - { 0x7e800d2e, 0x7e800d2e, 0x7ee80d2e, 0x7ee80d2e, 0x7ee80d2e } }, - { AR5K_PHY_AGCCOARSE, - { 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e } }, - { AR5K_PHY(27), - { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } }, - { AR5K_PHY_RX_DELAY, - { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } }, - { AR5K_PHY_FRAME_CTL_5211, - { 0xf7b81020, 0xf7b81020, 0xf7b80d10, 0xf7b81010, 0xf7b81010 } }, - { AR5K_PHY_CCKTXCTL, - { 0x00000000, 0x00000000, 0x00000008, 0x00000008, 0x00000008 } }, - { AR5K_PHY(642), - { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, - { AR5K_PHY_GAIN_2GHZ, - { 0x642c0140, 0x642c0140, 0x6442c160, 0x6442c160, 0x6442c160 } }, - { 0xa21c, - { 0x1883800a, 0x1883800a, 0x1873800a, 0x1883800a, 0x1883800a } }, - { AR5K_DCU_FP, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY_AGC, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY(11), - { 0x00022ffe, 0x00022ffe, 0x00022ffe, 0x00022ffe, 0x00022ffe } }, - { AR5K_PHY(15), - { 0x00020100, 0x00020100, 0x00020100, 0x00020100, 0x00020100 } }, - { AR5K_PHY(19), - { 0x1284613c, 0x1284613c, 0x1284613c, 0x1284613c, 0x1284613c } }, - { AR5K_PHY_PAPD_PROBE, - { 0x00004882, 0x00004882, 0x00004882, 0x00004882, 0x00004882 } }, - { AR5K_PHY(80), - { 0x00000004, 0x00000004, 0x00000004, 0x00000004, 0x00000004 } }, - { AR5K_PHY(86), - { 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff } }, - { AR5K_PHY(93), - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0xa228, - { 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5 } }, - { 0xa23c, - { 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af } }, -}; - -/* Initial mode-specific settings for RF5413/5414 (Written after ar5212_ini) */ -/* XXX: No dumps for turbog yet, so turbog is the same with g here with some - * minor tweaking based on dumps from other chips */ -static const struct ath5k_ini_mode rf5413_ini_mode_end[] = { - { AR5K_TXCFG, - /* a/XR aTurbo b g gTurbo */ - { 0x00000015, 0x00000015, 0x00000015, 0x00000015, 0x00000015 } }, - { AR5K_USEC_5211, - { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } }, - { AR5K_PHY(10), - { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } }, - { AR5K_PHY(13), - { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } }, - { AR5K_PHY(14), - { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } }, - { AR5K_PHY(18), - { 0x0018fa61, 0x0018fa61, 0x001a1a63, 0x001a1a63, 0x001a1a63 } }, - { AR5K_PHY(20), - { 0x0c98b4e0, 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da, 0x0c98b0da } }, - { AR5K_PHY_SIG, - { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } }, - { AR5K_PHY_AGCCOARSE, - { 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e } }, - { AR5K_PHY(27), - { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } }, - { AR5K_PHY_RX_DELAY, - { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } }, - { AR5K_PHY_FRAME_CTL_5211, - { 0xf7b81000, 0xf7b81000, 0xf7b80d00, 0xf7b81000, 0xf7b81000 } }, - { AR5K_PHY_CCKTXCTL, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY(642), - { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, - { AR5K_PHY_GAIN_2GHZ, - { 0x002ec1e0, 0x002ec1e0, 0x002ac120, 0x002ac120, 0x002ac120 } }, - { 0xa21c, - { 0x1883800a, 0x1883800a, 0x1863800a, 0x1883800a, 0x1883800a } }, - { 0xa300, - { 0x18010000, 0x18010000, 0x18010000, 0x18010000, 0x18010000 } }, - { 0xa304, - { 0x30032602, 0x30032602, 0x30032602, 0x30032602, 0x30032602 } }, - { 0xa308, - { 0x48073e06, 0x48073e06, 0x48073e06, 0x48073e06, 0x48073e06 } }, - { 0xa30c, - { 0x560b4c0a, 0x560b4c0a, 0x560b4c0a, 0x560b4c0a, 0x560b4c0a } }, - { 0xa310, - { 0x641a600f, 0x641a600f, 0x641a600f, 0x641a600f, 0x641a600f } }, - { 0xa314, - { 0x784f6e1b, 0x784f6e1b, 0x784f6e1b, 0x784f6e1b, 0x784f6e1b } }, - { 0xa318, - { 0x868f7c5a, 0x868f7c5a, 0x868f7c5a, 0x868f7c5a, 0x868f7c5a } }, - { 0xa31c, - { 0x90cf865b, 0x90cf865b, 0x8ecf865b, 0x8ecf865b, 0x8ecf865b } }, - { 0xa320, - { 0x9d4f970f, 0x9d4f970f, 0x9b4f970f, 0x9b4f970f, 0x9b4f970f } }, - { 0xa324, - { 0xa7cfa38f, 0xa7cfa38f, 0xa3cf9f8f, 0xa3cf9f8f, 0xa3cf9f8f } }, - { 0xa328, - { 0xb55faf1f, 0xb55faf1f, 0xb35faf1f, 0xb35faf1f, 0xb35faf1f } }, - { 0xa32c, - { 0xbddfb99f, 0xbddfb99f, 0xbbdfb99f, 0xbbdfb99f, 0xbbdfb99f } }, - { 0xa330, - { 0xcb7fc53f, 0xcb7fc53f, 0xcb7fc73f, 0xcb7fc73f, 0xcb7fc73f } }, - { 0xa334, - { 0xd5ffd1bf, 0xd5ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf } }, - { AR5K_DCU_FP, - { 0x000003e0, 0x000003e0, 0x000003e0, 0x000003e0, 0x000003e0 } }, - { 0x4068, - { 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 } }, - { 0x8060, - { 0x0000000f, 0x0000000f, 0x0000000f, 0x0000000f, 0x0000000f } }, - { 0x809c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0x80a0, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0x8118, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0x811c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0x8120, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0x8124, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0x8128, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0x812c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0x8130, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0x8134, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0x8138, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0x813c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0x8140, - { 0x800003f9, 0x800003f9, 0x800003f9, 0x800003f9, 0x800003f9 } }, - { 0x8144, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY_AGC, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY(11), - { 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000 } }, - { AR5K_PHY(15), - { 0x00200400, 0x00200400, 0x00200400, 0x00200400, 0x00200400 } }, - { AR5K_PHY(19), - { 0x1284233c, 0x1284233c, 0x1284233c, 0x1284233c, 0x1284233c } }, - { AR5K_PHY_SCR, - { 0x0000001f, 0x0000001f, 0x0000001f, 0x0000001f, 0x0000001f } }, - { AR5K_PHY_SLMT, - { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } }, - { AR5K_PHY_SCAL, - { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } }, - { AR5K_PHY(86), - { 0x00081fff, 0x00081fff, 0x00081fff, 0x00081fff, 0x00081fff } }, - { AR5K_PHY(96), - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY(97), - { 0x02800000, 0x02800000, 0x02800000, 0x02800000, 0x02800000 } }, - { AR5K_PHY(104), - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY(120), - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY(121), - { 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa } }, - { AR5K_PHY(122), - { 0x3c466478, 0x3c466478, 0x3c466478, 0x3c466478, 0x3c466478 } }, - { AR5K_PHY(123), - { 0x000000aa, 0x000000aa, 0x000000aa, 0x000000aa, 0x000000aa } }, - { AR5K_PHY_SCLOCK, - { 0x0000000c, 0x0000000c, 0x0000000c, 0x0000000c, 0x0000000c } }, - { AR5K_PHY_SDELAY, - { 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff } }, - { AR5K_PHY_SPENDING, - { 0x00000014, 0x00000014, 0x00000014, 0x00000014, 0x00000014 } }, - { 0xa228, - { 0x000009b5, 0x000009b5, 0x000009b5, 0x000009b5, 0x000009b5 } }, - { 0xa23c, - { 0x93c889af, 0x93c889af, 0x93c889af, 0x93c889af, 0x93c889af } }, - { 0xa24c, - { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } }, - { 0xa250, - { 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000 } }, - { 0xa254, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0xa258, - { 0x0cc75380, 0x0cc75380, 0x0cc75380, 0x0cc75380, 0x0cc75380 } }, - { 0xa25c, - { 0x0f0f0f01, 0x0f0f0f01, 0x0f0f0f01, 0x0f0f0f01, 0x0f0f0f01 } }, - { 0xa260, - { 0x5f690f01, 0x5f690f01, 0x5f690f01, 0x5f690f01, 0x5f690f01 } }, - { 0xa264, - { 0x00418a11, 0x00418a11, 0x00418a11, 0x00418a11, 0x00418a11 } }, - { 0xa268, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0xa26c, - { 0x0c30c16a, 0x0c30c16a, 0x0c30c16a, 0x0c30c16a, 0x0c30c16a } }, - { 0xa270, - { 0x00820820, 0x00820820, 0x00820820, 0x00820820, 0x00820820 } }, - { 0xa274, - { 0x081b7caa, 0x081b7caa, 0x081b7caa, 0x081b7caa, 0x081b7caa } }, - { 0xa278, - { 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce } }, - { 0xa27c, - { 0x051701ce, 0x051701ce, 0x051701ce, 0x051701ce, 0x051701ce } }, - { 0xa338, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0xa33c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0xa340, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0xa344, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0xa348, - { 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff } }, - { 0xa34c, - { 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff } }, - { 0xa350, - { 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff } }, - { 0xa354, - { 0x0003ffff, 0x0003ffff, 0x0003ffff, 0x0003ffff, 0x0003ffff } }, - { 0xa358, - { 0x79a8aa1f, 0x79a8aa1f, 0x79a8aa1f, 0x79a8aa1f, 0x79a8aa1f } }, - { 0xa35c, - { 0x066c420f, 0x066c420f, 0x066c420f, 0x066c420f, 0x066c420f } }, - { 0xa360, - { 0x0f282207, 0x0f282207, 0x0f282207, 0x0f282207, 0x0f282207 } }, - { 0xa364, - { 0x17601685, 0x17601685, 0x17601685, 0x17601685, 0x17601685 } }, - { 0xa368, - { 0x1f801104, 0x1f801104, 0x1f801104, 0x1f801104, 0x1f801104 } }, - { 0xa36c, - { 0x37a00c03, 0x37a00c03, 0x37a00c03, 0x37a00c03, 0x37a00c03 } }, - { 0xa370, - { 0x3fc40883, 0x3fc40883, 0x3fc40883, 0x3fc40883, 0x3fc40883 } }, - { 0xa374, - { 0x57c00803, 0x57c00803, 0x57c00803, 0x57c00803, 0x57c00803 } }, - { 0xa378, - { 0x5fd80682, 0x5fd80682, 0x5fd80682, 0x5fd80682, 0x5fd80682 } }, - { 0xa37c, - { 0x7fe00482, 0x7fe00482, 0x7fe00482, 0x7fe00482, 0x7fe00482 } }, - { 0xa380, - { 0x7f3c7bba, 0x7f3c7bba, 0x7f3c7bba, 0x7f3c7bba, 0x7f3c7bba } }, - { 0xa384, - { 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0 } }, -}; - -/* Initial mode-specific settings for RF2413/2414 (Written after ar5212_ini) */ -/* XXX: No dumps for turbog yet, so turbog is the same with g here with some - * minor tweaking based on dumps from other chips */ -static const struct ath5k_ini_mode rf2413_ini_mode_end[] = { - { AR5K_TXCFG, - /* b g gTurbo */ - { 0x00000015, 0x00000015, 0x00000015 } }, - { AR5K_USEC_5211, - { 0x04e01395, 0x12e013ab, 0x098813cf } }, - { AR5K_PHY(10), - { 0x05020000, 0x0a020001, 0x0a020001 } }, - { AR5K_PHY(13), - { 0x00000e00, 0x00000e00, 0x00000e00 } }, - { AR5K_PHY(14), - { 0x0000000a, 0x0000000a, 0x0000000a } }, - { AR5K_PHY(18), - { 0x001a6a64, 0x001a6a64, 0x001a6a64 } }, - { AR5K_PHY(20), - { 0x0de8b0da, 0x0c98b0da, 0x0c98b0da } }, - { AR5K_PHY_SIG, - { 0x7ee80d2e, 0x7ec80d2e, 0x7ec80d2e } }, - { AR5K_PHY_AGCCOARSE, - { 0x3137665e, 0x3139605e, 0x3139605e } }, - { AR5K_PHY(27), - { 0x050cb081, 0x050cb081, 0x050cb081 } }, - { AR5K_PHY_RX_DELAY, - { 0x0000044c, 0x00000898, 0x000007d0 } }, - { AR5K_PHY_FRAME_CTL_5211, - { 0xf7b80d00, 0xf7b81000, 0xf7b81000 } }, - { AR5K_PHY_CCKTXCTL, - { 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY(642), - { 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, - { AR5K_PHY_GAIN_2GHZ, - { 0x0042c140, 0x0042c140, 0x0042c140 } }, - { 0xa21c, - { 0x1863800a, 0x1883800a, 0x1883800a } }, - { AR5K_DCU_FP, - { 0x000003e0, 0x000003e0, 0x000003e0 } }, - { 0x8060, - { 0x0000000f, 0x0000000f, 0x0000000f } }, - { 0x8118, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 0x811c, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 0x8120, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 0x8124, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 0x8128, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 0x812c, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 0x8130, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 0x8134, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 0x8138, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 0x813c, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 0x8140, - { 0x800000a8, 0x800000a8, 0x800000a8 } }, - { 0x8144, - { 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY_AGC, - { 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY(11), - { 0x0000a000, 0x0000a000, 0x0000a000 } }, - { AR5K_PHY(15), - { 0x00200400, 0x00200400, 0x00200400 } }, - { AR5K_PHY(19), - { 0x1284233c, 0x1284233c, 0x1284233c } }, - { AR5K_PHY_SCR, - { 0x0000001f, 0x0000001f, 0x0000001f } }, - { AR5K_PHY_SLMT, - { 0x00000080, 0x00000080, 0x00000080 } }, - { AR5K_PHY_SCAL, - { 0x0000000e, 0x0000000e, 0x0000000e } }, - { AR5K_PHY(86), - { 0x000000ff, 0x000000ff, 0x000000ff } }, - { AR5K_PHY(96), - { 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY(97), - { 0x02800000, 0x02800000, 0x02800000 } }, - { AR5K_PHY(104), - { 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY(120), - { 0x00000000, 0x00000000, 0x00000000 } }, - { AR5K_PHY(121), - { 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa } }, - { AR5K_PHY(122), - { 0x3c466478, 0x3c466478, 0x3c466478 } }, - { AR5K_PHY(123), - { 0x000000aa, 0x000000aa, 0x000000aa } }, - { AR5K_PHY_SCLOCK, - { 0x0000000c, 0x0000000c, 0x0000000c } }, - { AR5K_PHY_SDELAY, - { 0x000000ff, 0x000000ff, 0x000000ff } }, - { AR5K_PHY_SPENDING, - { 0x00000014, 0x00000014, 0x00000014 } }, - { 0xa228, - { 0x000009b5, 0x000009b5, 0x000009b5 } }, - { 0xa23c, - { 0x93c889af, 0x93c889af, 0x93c889af } }, - { 0xa24c, - { 0x00000001, 0x00000001, 0x00000001 } }, - { 0xa250, - { 0x0000a000, 0x0000a000, 0x0000a000 } }, - { 0xa254, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 0xa258, - { 0x0cc75380, 0x0cc75380, 0x0cc75380 } }, - { 0xa25c, - { 0x0f0f0f01, 0x0f0f0f01, 0x0f0f0f01 } }, - { 0xa260, - { 0x5f690f01, 0x5f690f01, 0x5f690f01 } }, - { 0xa264, - { 0x00418a11, 0x00418a11, 0x00418a11 } }, - { 0xa268, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 0xa26c, - { 0x0c30c16a, 0x0c30c16a, 0x0c30c16a } }, - { 0xa270, - { 0x00820820, 0x00820820, 0x00820820 } }, - { 0xa274, - { 0x001b7caa, 0x001b7caa, 0x001b7caa } }, - { 0xa278, - { 0x1ce739ce, 0x1ce739ce, 0x1ce739ce } }, - { 0xa27c, - { 0x051701ce, 0x051701ce, 0x051701ce } }, - { 0xa300, - { 0x18010000, 0x18010000, 0x18010000 } }, - { 0xa304, - { 0x30032602, 0x30032602, 0x30032602 } }, - { 0xa308, - { 0x48073e06, 0x48073e06, 0x48073e06 } }, - { 0xa30c, - { 0x560b4c0a, 0x560b4c0a, 0x560b4c0a } }, - { 0xa310, - { 0x641a600f, 0x641a600f, 0x641a600f } }, - { 0xa314, - { 0x784f6e1b, 0x784f6e1b, 0x784f6e1b } }, - { 0xa318, - { 0x868f7c5a, 0x868f7c5a, 0x868f7c5a } }, - { 0xa31c, - { 0x8ecf865b, 0x8ecf865b, 0x8ecf865b } }, - { 0xa320, - { 0x9d4f970f, 0x9d4f970f, 0x9d4f970f } }, - { 0xa324, - { 0xa5cfa18f, 0xa5cfa18f, 0xa5cfa18f } }, - { 0xa328, - { 0xb55faf1f, 0xb55faf1f, 0xb55faf1f } }, - { 0xa32c, - { 0xbddfb99f, 0xbddfb99f, 0xbddfb99f } }, - { 0xa330, - { 0xcd7fc73f, 0xcd7fc73f, 0xcd7fc73f } }, - { 0xa334, - { 0xd5ffd1bf, 0xd5ffd1bf, 0xd5ffd1bf } }, - { 0xa338, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 0xa33c, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 0xa340, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 0xa344, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 0xa348, - { 0x3fffffff, 0x3fffffff, 0x3fffffff } }, - { 0xa34c, - { 0x3fffffff, 0x3fffffff, 0x3fffffff } }, - { 0xa350, - { 0x3fffffff, 0x3fffffff, 0x3fffffff } }, - { 0xa354, - { 0x0003ffff, 0x0003ffff, 0x0003ffff } }, - { 0xa358, - { 0x79a8aa1f, 0x79a8aa1f, 0x79a8aa1f } }, - { 0xa35c, - { 0x066c420f, 0x066c420f, 0x066c420f } }, - { 0xa360, - { 0x0f282207, 0x0f282207, 0x0f282207 } }, - { 0xa364, - { 0x17601685, 0x17601685, 0x17601685 } }, - { 0xa368, - { 0x1f801104, 0x1f801104, 0x1f801104 } }, - { 0xa36c, - { 0x37a00c03, 0x37a00c03, 0x37a00c03 } }, - { 0xa370, - { 0x3fc40883, 0x3fc40883, 0x3fc40883 } }, - { 0xa374, - { 0x57c00803, 0x57c00803, 0x57c00803 } }, - { 0xa378, - { 0x5fd80682, 0x5fd80682, 0x5fd80682 } }, - { 0xa37c, - { 0x7fe00482, 0x7fe00482, 0x7fe00482 } }, - { 0xa380, - { 0x7f3c7bba, 0x7f3c7bba, 0x7f3c7bba } }, - { 0xa384, - { 0xf3307ff0, 0xf3307ff0, 0xf3307ff0 } }, -}; - -/* Initial mode-specific settings for RF2425 (Written after ar5212_ini) */ -/* XXX: No dumps for turbog yet, so turbog is the same with g here with some - * minor tweaking based on dumps from other chips */ -static const struct ath5k_ini_mode rf2425_ini_mode_end[] = { - { AR5K_TXCFG, - /* g gTurbo */ - { 0x00000015, 0x00000015 } }, - { AR5K_USEC_5211, - { 0x12e013ab, 0x098813cf } }, - { AR5K_PHY_TURBO, - { 0x00000000, 0x00000003 } }, - { AR5K_PHY(10), - { 0x0a020001, 0x0a020001 } }, - { AR5K_PHY(13), - { 0x00000e0e, 0x00000e0e } }, - { AR5K_PHY(14), - { 0x0000000b, 0x0000000b } }, - { AR5K_PHY(17), - { 0x13721422, 0x13721422 } }, - { AR5K_PHY(18), - { 0x00199a65, 0x00199a65 } }, - { AR5K_PHY(20), - { 0x0c98b0da, 0x0c98b0da } }, - { AR5K_PHY_SIG, - { 0x7ec80d2e, 0x7ec80d2e } }, - { AR5K_PHY_AGCCOARSE, - { 0x3139605e, 0x3139605e } }, - { AR5K_PHY(27), - { 0x050cb081, 0x050cb081 } }, - { AR5K_PHY_RX_DELAY, - { 0x00000898, 0x000007d0 } }, - { AR5K_PHY_FRAME_CTL_5211, - { 0xf7b81000, 0xf7b81000 } }, - { AR5K_PHY_CCKTXCTL, - { 0x00000000, 0x00000000 } }, - { AR5K_PHY(642), - { 0xd03e6788, 0xd03e6788 } }, - { AR5K_PHY_GAIN_2GHZ, - { 0x0052c140, 0x0052c140 } }, - { 0xa21c, - { 0x1883800a, 0x1883800a } }, - { 0xa324, - { 0xa7cfa7cf, 0xa7cfa7cf } }, - { 0xa328, - { 0xa7cfa7cf, 0xa7cfa7cf } }, - { 0xa32c, - { 0xa7cfa7cf, 0xa7cfa7cf } }, - { 0xa330, - { 0xa7cfa7cf, 0xa7cfa7cf } }, - { 0xa334, - { 0xa7cfa7cf, 0xa7cfa7cf } }, - { AR5K_DCU_FP, - { 0x000003e0, 0x000003e0 } }, - { 0x8060, - { 0x0000000f, 0x0000000f } }, - { 0x809c, - { 0x00000000, 0x00000000 } }, - { 0x80a0, - { 0x00000000, 0x00000000 } }, - { 0x8118, - { 0x00000000, 0x00000000 } }, - { 0x811c, - { 0x00000000, 0x00000000 } }, - { 0x8120, - { 0x00000000, 0x00000000 } }, - { 0x8124, - { 0x00000000, 0x00000000 } }, - { 0x8128, - { 0x00000000, 0x00000000 } }, - { 0x812c, - { 0x00000000, 0x00000000 } }, - { 0x8130, - { 0x00000000, 0x00000000 } }, - { 0x8134, - { 0x00000000, 0x00000000 } }, - { 0x8138, - { 0x00000000, 0x00000000 } }, - { 0x813c, - { 0x00000000, 0x00000000 } }, - { 0x8140, - { 0x800003f9, 0x800003f9 } }, - { 0x8144, - { 0x00000000, 0x00000000 } }, - { AR5K_PHY_AGC, - { 0x00000000, 0x00000000 } }, - { AR5K_PHY(11), - { 0x0000a000, 0x0000a000 } }, - { AR5K_PHY(15), - { 0x00200400, 0x00200400 } }, - { AR5K_PHY(19), - { 0x1284233c, 0x1284233c } }, - { AR5K_PHY_SCR, - { 0x0000001f, 0x0000001f } }, - { AR5K_PHY_SLMT, - { 0x00000080, 0x00000080 } }, - { AR5K_PHY_SCAL, - { 0x0000000e, 0x0000000e } }, - { AR5K_PHY(86), - { 0x00081fff, 0x00081fff } }, - { AR5K_PHY(96), - { 0x00000000, 0x00000000 } }, - { AR5K_PHY(97), - { 0x02800000, 0x02800000 } }, - { AR5K_PHY(104), - { 0x00000000, 0x00000000 } }, - { AR5K_PHY(119), - { 0xfebadbe8, 0xfebadbe8 } }, - { AR5K_PHY(120), - { 0x00000000, 0x00000000 } }, - { AR5K_PHY(121), - { 0xaaaaaaaa, 0xaaaaaaaa } }, - { AR5K_PHY(122), - { 0x3c466478, 0x3c466478 } }, - { AR5K_PHY(123), - { 0x000000aa, 0x000000aa } }, - { AR5K_PHY_SCLOCK, - { 0x0000000c, 0x0000000c } }, - { AR5K_PHY_SDELAY, - { 0x000000ff, 0x000000ff } }, - { AR5K_PHY_SPENDING, - { 0x00000014, 0x00000014 } }, - { 0xa228, - { 0x000009b5, 0x000009b5 } }, - { AR5K_PHY_TXPOWER_RATE3, - { 0x20202020, 0x20202020 } }, - { AR5K_PHY_TXPOWER_RATE4, - { 0x20202020, 0x20202020 } }, - { 0xa23c, - { 0x93c889af, 0x93c889af } }, - { 0xa24c, - { 0x00000001, 0x00000001 } }, - { 0xa250, - { 0x0000a000, 0x0000a000 } }, - { 0xa254, - { 0x00000000, 0x00000000 } }, - { 0xa258, - { 0x0cc75380, 0x0cc75380 } }, - { 0xa25c, - { 0x0f0f0f01, 0x0f0f0f01 } }, - { 0xa260, - { 0x5f690f01, 0x5f690f01 } }, - { 0xa264, - { 0x00418a11, 0x00418a11 } }, - { 0xa268, - { 0x00000000, 0x00000000 } }, - { 0xa26c, - { 0x0c30c166, 0x0c30c166 } }, - { 0xa270, - { 0x00820820, 0x00820820 } }, - { 0xa274, - { 0x081a3caa, 0x081a3caa } }, - { 0xa278, - { 0x1ce739ce, 0x1ce739ce } }, - { 0xa27c, - { 0x051701ce, 0x051701ce } }, - { 0xa300, - { 0x16010000, 0x16010000 } }, - { 0xa304, - { 0x2c032402, 0x2c032402 } }, - { 0xa308, - { 0x48433e42, 0x48433e42 } }, - { 0xa30c, - { 0x5a0f500b, 0x5a0f500b } }, - { 0xa310, - { 0x6c4b624a, 0x6c4b624a } }, - { 0xa314, - { 0x7e8b748a, 0x7e8b748a } }, - { 0xa318, - { 0x96cf8ccb, 0x96cf8ccb } }, - { 0xa31c, - { 0xa34f9d0f, 0xa34f9d0f } }, - { 0xa320, - { 0xa7cfa58f, 0xa7cfa58f } }, - { 0xa348, - { 0x3fffffff, 0x3fffffff } }, - { 0xa34c, - { 0x3fffffff, 0x3fffffff } }, - { 0xa350, - { 0x3fffffff, 0x3fffffff } }, - { 0xa354, - { 0x0003ffff, 0x0003ffff } }, - { 0xa358, - { 0x79a8aa1f, 0x79a8aa1f } }, - { 0xa35c, - { 0x066c420f, 0x066c420f } }, - { 0xa360, - { 0x0f282207, 0x0f282207 } }, - { 0xa364, - { 0x17601685, 0x17601685 } }, - { 0xa368, - { 0x1f801104, 0x1f801104 } }, - { 0xa36c, - { 0x37a00c03, 0x37a00c03 } }, - { 0xa370, - { 0x3fc40883, 0x3fc40883 } }, - { 0xa374, - { 0x57c00803, 0x57c00803 } }, - { 0xa378, - { 0x5fd80682, 0x5fd80682 } }, - { 0xa37c, - { 0x7fe00482, 0x7fe00482 } }, - { 0xa380, - { 0x7f3c7bba, 0x7f3c7bba } }, - { 0xa384, - { 0xf3307ff0, 0xf3307ff0 } }, -}; - -/* - * Initial BaseBand Gain settings for RF5111/5112 (AR5210 comes with - * RF5110 only so initial BB Gain settings are included in AR5K_AR5210_INI) - */ - -/* RF5111 Initial BaseBand Gain settings */ -static const struct ath5k_ini rf5111_ini_bbgain[] = { - { AR5K_BB_GAIN(0), 0x00000000 }, - { AR5K_BB_GAIN(1), 0x00000020 }, - { AR5K_BB_GAIN(2), 0x00000010 }, - { AR5K_BB_GAIN(3), 0x00000030 }, - { AR5K_BB_GAIN(4), 0x00000008 }, - { AR5K_BB_GAIN(5), 0x00000028 }, - { AR5K_BB_GAIN(6), 0x00000004 }, - { AR5K_BB_GAIN(7), 0x00000024 }, - { AR5K_BB_GAIN(8), 0x00000014 }, - { AR5K_BB_GAIN(9), 0x00000034 }, - { AR5K_BB_GAIN(10), 0x0000000c }, - { AR5K_BB_GAIN(11), 0x0000002c }, - { AR5K_BB_GAIN(12), 0x00000002 }, - { AR5K_BB_GAIN(13), 0x00000022 }, - { AR5K_BB_GAIN(14), 0x00000012 }, - { AR5K_BB_GAIN(15), 0x00000032 }, - { AR5K_BB_GAIN(16), 0x0000000a }, - { AR5K_BB_GAIN(17), 0x0000002a }, - { AR5K_BB_GAIN(18), 0x00000006 }, - { AR5K_BB_GAIN(19), 0x00000026 }, - { AR5K_BB_GAIN(20), 0x00000016 }, - { AR5K_BB_GAIN(21), 0x00000036 }, - { AR5K_BB_GAIN(22), 0x0000000e }, - { AR5K_BB_GAIN(23), 0x0000002e }, - { AR5K_BB_GAIN(24), 0x00000001 }, - { AR5K_BB_GAIN(25), 0x00000021 }, - { AR5K_BB_GAIN(26), 0x00000011 }, - { AR5K_BB_GAIN(27), 0x00000031 }, - { AR5K_BB_GAIN(28), 0x00000009 }, - { AR5K_BB_GAIN(29), 0x00000029 }, - { AR5K_BB_GAIN(30), 0x00000005 }, - { AR5K_BB_GAIN(31), 0x00000025 }, - { AR5K_BB_GAIN(32), 0x00000015 }, - { AR5K_BB_GAIN(33), 0x00000035 }, - { AR5K_BB_GAIN(34), 0x0000000d }, - { AR5K_BB_GAIN(35), 0x0000002d }, - { AR5K_BB_GAIN(36), 0x00000003 }, - { AR5K_BB_GAIN(37), 0x00000023 }, - { AR5K_BB_GAIN(38), 0x00000013 }, - { AR5K_BB_GAIN(39), 0x00000033 }, - { AR5K_BB_GAIN(40), 0x0000000b }, - { AR5K_BB_GAIN(41), 0x0000002b }, - { AR5K_BB_GAIN(42), 0x0000002b }, - { AR5K_BB_GAIN(43), 0x0000002b }, - { AR5K_BB_GAIN(44), 0x0000002b }, - { AR5K_BB_GAIN(45), 0x0000002b }, - { AR5K_BB_GAIN(46), 0x0000002b }, - { AR5K_BB_GAIN(47), 0x0000002b }, - { AR5K_BB_GAIN(48), 0x0000002b }, - { AR5K_BB_GAIN(49), 0x0000002b }, - { AR5K_BB_GAIN(50), 0x0000002b }, - { AR5K_BB_GAIN(51), 0x0000002b }, - { AR5K_BB_GAIN(52), 0x0000002b }, - { AR5K_BB_GAIN(53), 0x0000002b }, - { AR5K_BB_GAIN(54), 0x0000002b }, - { AR5K_BB_GAIN(55), 0x0000002b }, - { AR5K_BB_GAIN(56), 0x0000002b }, - { AR5K_BB_GAIN(57), 0x0000002b }, - { AR5K_BB_GAIN(58), 0x0000002b }, - { AR5K_BB_GAIN(59), 0x0000002b }, - { AR5K_BB_GAIN(60), 0x0000002b }, - { AR5K_BB_GAIN(61), 0x0000002b }, - { AR5K_BB_GAIN(62), 0x00000002 }, - { AR5K_BB_GAIN(63), 0x00000016 }, -}; - -/* RF5112 Initial BaseBand Gain settings (Same for RF5413/5414) */ -static const struct ath5k_ini rf5112_ini_bbgain[] = { - { AR5K_BB_GAIN(0), 0x00000000 }, - { AR5K_BB_GAIN(1), 0x00000001 }, - { AR5K_BB_GAIN(2), 0x00000002 }, - { AR5K_BB_GAIN(3), 0x00000003 }, - { AR5K_BB_GAIN(4), 0x00000004 }, - { AR5K_BB_GAIN(5), 0x00000005 }, - { AR5K_BB_GAIN(6), 0x00000008 }, - { AR5K_BB_GAIN(7), 0x00000009 }, - { AR5K_BB_GAIN(8), 0x0000000a }, - { AR5K_BB_GAIN(9), 0x0000000b }, - { AR5K_BB_GAIN(10), 0x0000000c }, - { AR5K_BB_GAIN(11), 0x0000000d }, - { AR5K_BB_GAIN(12), 0x00000010 }, - { AR5K_BB_GAIN(13), 0x00000011 }, - { AR5K_BB_GAIN(14), 0x00000012 }, - { AR5K_BB_GAIN(15), 0x00000013 }, - { AR5K_BB_GAIN(16), 0x00000014 }, - { AR5K_BB_GAIN(17), 0x00000015 }, - { AR5K_BB_GAIN(18), 0x00000018 }, - { AR5K_BB_GAIN(19), 0x00000019 }, - { AR5K_BB_GAIN(20), 0x0000001a }, - { AR5K_BB_GAIN(21), 0x0000001b }, - { AR5K_BB_GAIN(22), 0x0000001c }, - { AR5K_BB_GAIN(23), 0x0000001d }, - { AR5K_BB_GAIN(24), 0x00000020 }, - { AR5K_BB_GAIN(25), 0x00000021 }, - { AR5K_BB_GAIN(26), 0x00000022 }, - { AR5K_BB_GAIN(27), 0x00000023 }, - { AR5K_BB_GAIN(28), 0x00000024 }, - { AR5K_BB_GAIN(29), 0x00000025 }, - { AR5K_BB_GAIN(30), 0x00000028 }, - { AR5K_BB_GAIN(31), 0x00000029 }, - { AR5K_BB_GAIN(32), 0x0000002a }, - { AR5K_BB_GAIN(33), 0x0000002b }, - { AR5K_BB_GAIN(34), 0x0000002c }, - { AR5K_BB_GAIN(35), 0x0000002d }, - { AR5K_BB_GAIN(36), 0x00000030 }, - { AR5K_BB_GAIN(37), 0x00000031 }, - { AR5K_BB_GAIN(38), 0x00000032 }, - { AR5K_BB_GAIN(39), 0x00000033 }, - { AR5K_BB_GAIN(40), 0x00000034 }, - { AR5K_BB_GAIN(41), 0x00000035 }, - { AR5K_BB_GAIN(42), 0x00000035 }, - { AR5K_BB_GAIN(43), 0x00000035 }, - { AR5K_BB_GAIN(44), 0x00000035 }, - { AR5K_BB_GAIN(45), 0x00000035 }, - { AR5K_BB_GAIN(46), 0x00000035 }, - { AR5K_BB_GAIN(47), 0x00000035 }, - { AR5K_BB_GAIN(48), 0x00000035 }, - { AR5K_BB_GAIN(49), 0x00000035 }, - { AR5K_BB_GAIN(50), 0x00000035 }, - { AR5K_BB_GAIN(51), 0x00000035 }, - { AR5K_BB_GAIN(52), 0x00000035 }, - { AR5K_BB_GAIN(53), 0x00000035 }, - { AR5K_BB_GAIN(54), 0x00000035 }, - { AR5K_BB_GAIN(55), 0x00000035 }, - { AR5K_BB_GAIN(56), 0x00000035 }, - { AR5K_BB_GAIN(57), 0x00000035 }, - { AR5K_BB_GAIN(58), 0x00000035 }, - { AR5K_BB_GAIN(59), 0x00000035 }, - { AR5K_BB_GAIN(60), 0x00000035 }, - { AR5K_BB_GAIN(61), 0x00000035 }, - { AR5K_BB_GAIN(62), 0x00000010 }, - { AR5K_BB_GAIN(63), 0x0000001a }, -}; - - -/* - * Write initial register dump - */ -static void ath5k_hw_ini_registers(struct ath5k_hw *ah, unsigned int size, - const struct ath5k_ini *ini_regs, bool change_channel) -{ - unsigned int i; - - /* Write initial registers */ - for (i = 0; i < size; i++) { - /* On channel change there is - * no need to mess with PCU */ - if (change_channel && - ini_regs[i].ini_register >= AR5K_PCU_MIN && - ini_regs[i].ini_register <= AR5K_PCU_MAX) - continue; - - switch (ini_regs[i].ini_mode) { - case AR5K_INI_READ: - /* Cleared on read */ - ath5k_hw_reg_read(ah, ini_regs[i].ini_register); - break; - case AR5K_INI_WRITE: - default: - AR5K_REG_WAIT(i); - ath5k_hw_reg_write(ah, ini_regs[i].ini_value, - ini_regs[i].ini_register); - } - } -} - -static void ath5k_hw_ini_mode_registers(struct ath5k_hw *ah, - unsigned int size, const struct ath5k_ini_mode *ini_mode, - u8 mode) -{ - unsigned int i; - - for (i = 0; i < size; i++) { - AR5K_REG_WAIT(i); - ath5k_hw_reg_write(ah, ini_mode[i].mode_value[mode], - (u32)ini_mode[i].mode_register); - } - -} - -int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel) -{ - /* - * Write initial register settings - */ - - /* For AR5212 and combatible */ - if (ah->ah_version == AR5K_AR5212) { - - /* First set of mode-specific settings */ - ath5k_hw_ini_mode_registers(ah, - ARRAY_SIZE(ar5212_ini_mode_start), - ar5212_ini_mode_start, mode); - - /* - * Write initial settings common for all modes - */ - ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5212_ini), - ar5212_ini, change_channel); - - /* Second set of mode-specific settings */ - if (ah->ah_radio == AR5K_RF5111) { - - ath5k_hw_ini_mode_registers(ah, - ARRAY_SIZE(ar5212_rf5111_ini_mode_end), - ar5212_rf5111_ini_mode_end, mode); - - /* Baseband gain table */ - ath5k_hw_ini_registers(ah, - ARRAY_SIZE(rf5111_ini_bbgain), - rf5111_ini_bbgain, change_channel); - - } else if (ah->ah_radio == AR5K_RF5112) { - - ath5k_hw_ini_mode_registers(ah, - ARRAY_SIZE(ar5212_rf5112_ini_mode_end), - ar5212_rf5112_ini_mode_end, mode); - - ath5k_hw_ini_registers(ah, - ARRAY_SIZE(rf5112_ini_bbgain), - rf5112_ini_bbgain, change_channel); - - } else if (ah->ah_radio == AR5K_RF5413) { - - ath5k_hw_ini_mode_registers(ah, - ARRAY_SIZE(rf5413_ini_mode_end), - rf5413_ini_mode_end, mode); - - ath5k_hw_ini_registers(ah, - ARRAY_SIZE(rf5112_ini_bbgain), - rf5112_ini_bbgain, change_channel); - - } else if (ah->ah_radio == AR5K_RF2413) { - - if (mode < 2) { - ATH5K_ERR(ah->ah_sc, - "unsupported channel mode: %d\n", mode); - return -EINVAL; - } - mode = mode - 2; - - /* Override a setting from ar5212_ini */ - ath5k_hw_reg_write(ah, 0x018830c6, AR5K_PHY(648)); - - ath5k_hw_ini_mode_registers(ah, - ARRAY_SIZE(rf2413_ini_mode_end), - rf2413_ini_mode_end, mode); - - /* Baseband gain table */ - ath5k_hw_ini_registers(ah, - ARRAY_SIZE(rf5112_ini_bbgain), - rf5112_ini_bbgain, change_channel); - - } else if (ah->ah_radio == AR5K_RF2425) { - - if (mode < 2) { - ATH5K_ERR(ah->ah_sc, - "unsupported channel mode: %d\n", mode); - return -EINVAL; - } - - /* Map b to g */ - if (mode == 2) - mode = 0; - else - mode = mode - 3; - - /* Override a setting from ar5212_ini */ - ath5k_hw_reg_write(ah, 0x018830c6, AR5K_PHY(648)); - - ath5k_hw_ini_mode_registers(ah, - ARRAY_SIZE(rf2425_ini_mode_end), - rf2425_ini_mode_end, mode); - - /* Baseband gain table */ - ath5k_hw_ini_registers(ah, - ARRAY_SIZE(rf5112_ini_bbgain), - rf5112_ini_bbgain, change_channel); - - } - - /* For AR5211 */ - } else if (ah->ah_version == AR5K_AR5211) { - - /* AR5K_MODE_11B */ - if (mode > 2) { - ATH5K_ERR(ah->ah_sc, - "unsupported channel mode: %d\n", mode); - return -EINVAL; - } - - /* Mode-specific settings */ - ath5k_hw_ini_mode_registers(ah, ARRAY_SIZE(ar5211_ini_mode), - ar5211_ini_mode, mode); - - /* - * Write initial settings common for all modes - */ - ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5211_ini), - ar5211_ini, change_channel); - - /* AR5211 only comes with 5111 */ - - /* Baseband gain table */ - ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5111_ini_bbgain), - rf5111_ini_bbgain, change_channel); - /* For AR5210 (for mode settings check out ath5k_hw_reset_tx_queue) */ - } else if (ah->ah_version == AR5K_AR5210) { - ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5210_ini), - ar5210_ini, change_channel); - } - - return 0; -} diff --git a/drivers/net/wireless/ath5k/pcu.c b/drivers/net/wireless/ath5k/pcu.c deleted file mode 100644 index 75eb9f43c74..00000000000 --- a/drivers/net/wireless/ath5k/pcu.c +++ /dev/null @@ -1,1155 +0,0 @@ -/* - * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007-2008 Matthew W. S. Bell <mentor@madwifi.org> - * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu> - * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> - * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -/*********************************\ -* Protocol Control Unit Functions * -\*********************************/ - -#include "ath5k.h" -#include "reg.h" -#include "debug.h" -#include "base.h" - -/*******************\ -* Generic functions * -\*******************/ - -/** - * ath5k_hw_set_opmode - Set PCU operating mode - * - * @ah: The &struct ath5k_hw - * - * Initialize PCU for the various operating modes (AP/STA etc) - * - * NOTE: ah->ah_op_mode must be set before calling this. - */ -int ath5k_hw_set_opmode(struct ath5k_hw *ah) -{ - u32 pcu_reg, beacon_reg, low_id, high_id; - - - /* Preserve rest settings */ - pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000; - pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP - | AR5K_STA_ID1_KEYSRCH_MODE - | (ah->ah_version == AR5K_AR5210 ? - (AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0)); - - beacon_reg = 0; - - ATH5K_TRACE(ah->ah_sc); - - switch (ah->ah_op_mode) { - case NL80211_IFTYPE_ADHOC: - pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_KEYSRCH_MODE; - beacon_reg |= AR5K_BCR_ADHOC; - if (ah->ah_version == AR5K_AR5210) - pcu_reg |= AR5K_STA_ID1_NO_PSPOLL; - else - AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS); - break; - - case NL80211_IFTYPE_AP: - case NL80211_IFTYPE_MESH_POINT: - pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE; - beacon_reg |= AR5K_BCR_AP; - if (ah->ah_version == AR5K_AR5210) - pcu_reg |= AR5K_STA_ID1_NO_PSPOLL; - else - AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS); - break; - - case NL80211_IFTYPE_STATION: - pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE - | (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_PWR_SV : 0); - case NL80211_IFTYPE_MONITOR: - pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE - | (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_NO_PSPOLL : 0); - break; - - default: - return -EINVAL; - } - - /* - * Set PCU registers - */ - low_id = AR5K_LOW_ID(ah->ah_sta_id); - high_id = AR5K_HIGH_ID(ah->ah_sta_id); - ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); - ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); - - /* - * Set Beacon Control Register on 5210 - */ - if (ah->ah_version == AR5K_AR5210) - ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR); - - return 0; -} - -/** - * ath5k_hw_update - Update mib counters (mac layer statistics) - * - * @ah: The &struct ath5k_hw - * @stats: The &struct ieee80211_low_level_stats we use to track - * statistics on the driver - * - * Reads MIB counters from PCU and updates sw statistics. Must be - * called after a MIB interrupt. - */ -void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, - struct ieee80211_low_level_stats *stats) -{ - ATH5K_TRACE(ah->ah_sc); - - /* Read-And-Clear */ - stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL); - stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL); - stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK); - stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL); - - /* XXX: Should we use this to track beacon count ? - * -we read it anyway to clear the register */ - ath5k_hw_reg_read(ah, AR5K_BEACON_CNT); - - /* Reset profile count registers on 5212*/ - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX); - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX); - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR); - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE); - } - - /* TODO: Handle ANI stats */ -} - -/** - * ath5k_hw_set_ack_bitrate - set bitrate for ACKs - * - * @ah: The &struct ath5k_hw - * @high: Flag to determine if we want to use high transmition rate - * for ACKs or not - * - * If high flag is set, we tell hw to use a set of control rates based on - * the current transmition rate (check out control_rates array inside reset.c). - * If not hw just uses the lowest rate available for the current modulation - * scheme being used (1Mbit for CCK and 6Mbits for OFDM). - */ -void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high) -{ - if (ah->ah_version != AR5K_AR5212) - return; - else { - u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB; - if (high) - AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val); - } -} - - -/******************\ -* ACK/CTS Timeouts * -\******************/ - -/** - * ath5k_hw_het_ack_timeout - Get ACK timeout from PCU in usec - * - * @ah: The &struct ath5k_hw - */ -unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - - return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, - AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo); -} - -/** - * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU - * - * @ah: The &struct ath5k_hw - * @timeout: Timeout in usec - */ -int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) -{ - ATH5K_TRACE(ah->ah_sc); - if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK), - ah->ah_turbo) <= timeout) - return -EINVAL; - - AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK, - ath5k_hw_htoclock(timeout, ah->ah_turbo)); - - return 0; -} - -/** - * ath5k_hw_get_cts_timeout - Get CTS timeout from PCU in usec - * - * @ah: The &struct ath5k_hw - */ -unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, - AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo); -} - -/** - * ath5k_hw_set_cts_timeout - Set CTS timeout on PCU - * - * @ah: The &struct ath5k_hw - * @timeout: Timeout in usec - */ -int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) -{ - ATH5K_TRACE(ah->ah_sc); - if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS), - ah->ah_turbo) <= timeout) - return -EINVAL; - - AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS, - ath5k_hw_htoclock(timeout, ah->ah_turbo)); - - return 0; -} - - -/****************\ -* BSSID handling * -\****************/ - -/** - * ath5k_hw_get_lladdr - Get station id - * - * @ah: The &struct ath5k_hw - * @mac: The card's mac address - * - * Initialize ah->ah_sta_id using the mac address provided - * (just a memcpy). - * - * TODO: Remove it once we merge ath5k_softc and ath5k_hw - */ -void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac) -{ - ATH5K_TRACE(ah->ah_sc); - memcpy(mac, ah->ah_sta_id, ETH_ALEN); -} - -/** - * ath5k_hw_set_lladdr - Set station id - * - * @ah: The &struct ath5k_hw - * @mac: The card's mac address - * - * Set station id on hw using the provided mac address - */ -int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) -{ - u32 low_id, high_id; - u32 pcu_reg; - - ATH5K_TRACE(ah->ah_sc); - /* Set new station ID */ - memcpy(ah->ah_sta_id, mac, ETH_ALEN); - - pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000; - - low_id = AR5K_LOW_ID(mac); - high_id = AR5K_HIGH_ID(mac); - - ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); - ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); - - return 0; -} - -/** - * ath5k_hw_set_associd - Set BSSID for association - * - * @ah: The &struct ath5k_hw - * @bssid: BSSID - * @assoc_id: Assoc id - * - * Sets the BSSID which trigers the "SME Join" operation - */ -void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id) -{ - u32 low_id, high_id; - u16 tim_offset = 0; - - /* - * Set simple BSSID mask on 5212 - */ - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_bssid_mask), - AR5K_BSS_IDM0); - ath5k_hw_reg_write(ah, AR5K_HIGH_ID(ah->ah_bssid_mask), - AR5K_BSS_IDM1); - } - - /* - * Set BSSID which triggers the "SME Join" operation - */ - low_id = AR5K_LOW_ID(bssid); - high_id = AR5K_HIGH_ID(bssid); - ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0); - ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) << - AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1); - - if (assoc_id == 0) { - ath5k_hw_disable_pspoll(ah); - return; - } - - AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM, - tim_offset ? tim_offset + 4 : 0); - - ath5k_hw_enable_pspoll(ah, NULL, 0); -} - -/** - * ath5k_hw_set_bssid_mask - filter out bssids we listen - * - * @ah: the &struct ath5k_hw - * @mask: the bssid_mask, a u8 array of size ETH_ALEN - * - * BSSID masking is a method used by AR5212 and newer hardware to inform PCU - * which bits of the interface's MAC address should be looked at when trying - * to decide which packets to ACK. In station mode and AP mode with a single - * BSS every bit matters since we lock to only one BSS. In AP mode with - * multiple BSSes (virtual interfaces) not every bit matters because hw must - * accept frames for all BSSes and so we tweak some bits of our mac address - * in order to have multiple BSSes. - * - * NOTE: This is a simple filter and does *not* filter out all - * relevant frames. Some frames that are not for us might get ACKed from us - * by PCU because they just match the mask. - * - * When handling multiple BSSes you can get the BSSID mask by computing the - * set of ~ ( MAC XOR BSSID ) for all bssids we handle. - * - * When you do this you are essentially computing the common bits of all your - * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with - * the MAC address to obtain the relevant bits and compare the result with - * (frame's BSSID & mask) to see if they match. - */ -/* - * Simple example: on your card you have have two BSSes you have created with - * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address. - * There is another BSSID-03 but you are not part of it. For simplicity's sake, - * assuming only 4 bits for a mac address and for BSSIDs you can then have: - * - * \ - * MAC: 0001 | - * BSSID-01: 0100 | --> Belongs to us - * BSSID-02: 1001 | - * / - * ------------------- - * BSSID-03: 0110 | --> External - * ------------------- - * - * Our bssid_mask would then be: - * - * On loop iteration for BSSID-01: - * ~(0001 ^ 0100) -> ~(0101) - * -> 1010 - * bssid_mask = 1010 - * - * On loop iteration for BSSID-02: - * bssid_mask &= ~(0001 ^ 1001) - * bssid_mask = (1010) & ~(0001 ^ 1001) - * bssid_mask = (1010) & ~(1001) - * bssid_mask = (1010) & (0110) - * bssid_mask = 0010 - * - * A bssid_mask of 0010 means "only pay attention to the second least - * significant bit". This is because its the only bit common - * amongst the MAC and all BSSIDs we support. To findout what the real - * common bit is we can simply "&" the bssid_mask now with any BSSID we have - * or our MAC address (we assume the hardware uses the MAC address). - * - * Now, suppose there's an incoming frame for BSSID-03: - * - * IFRAME-01: 0110 - * - * An easy eye-inspeciton of this already should tell you that this frame - * will not pass our check. This is beacuse the bssid_mask tells the - * hardware to only look at the second least significant bit and the - * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB - * as 1, which does not match 0. - * - * So with IFRAME-01 we *assume* the hardware will do: - * - * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; - * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0; - * --> allow = (0010) == 0000 ? 1 : 0; - * --> allow = 0 - * - * Lets now test a frame that should work: - * - * IFRAME-02: 0001 (we should allow) - * - * allow = (0001 & 1010) == 1010 - * - * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; - * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0; - * --> allow = (0010) == (0010) - * --> allow = 1 - * - * Other examples: - * - * IFRAME-03: 0100 --> allowed - * IFRAME-04: 1001 --> allowed - * IFRAME-05: 1101 --> allowed but its not for us!!! - * - */ -int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) -{ - u32 low_id, high_id; - ATH5K_TRACE(ah->ah_sc); - - /* Cache bssid mask so that we can restore it - * on reset */ - memcpy(ah->ah_bssid_mask, mask, ETH_ALEN); - if (ah->ah_version == AR5K_AR5212) { - low_id = AR5K_LOW_ID(mask); - high_id = AR5K_HIGH_ID(mask); - - ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0); - ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1); - - return 0; - } - - return -EIO; -} - - -/************\ -* RX Control * -\************/ - -/** - * ath5k_hw_start_rx_pcu - Start RX engine - * - * @ah: The &struct ath5k_hw - * - * Starts RX engine on PCU so that hw can process RXed frames - * (ACK etc). - * - * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma - * TODO: Init ANI here - */ -void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); -} - -/** - * at5k_hw_stop_rx_pcu - Stop RX engine - * - * @ah: The &struct ath5k_hw - * - * Stops RX engine on PCU - * - * TODO: Detach ANI here - */ -void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); -} - -/* - * Set multicast filter - */ -void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) -{ - ATH5K_TRACE(ah->ah_sc); - /* Set the multicat filter */ - ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0); - ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1); -} - -/* - * Set multicast filter by index - */ -int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index) -{ - - ATH5K_TRACE(ah->ah_sc); - if (index >= 64) - return -EINVAL; - else if (index >= 32) - AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1, - (1 << (index - 32))); - else - AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); - - return 0; -} - -/* - * Clear Multicast filter by index - */ -int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index) -{ - - ATH5K_TRACE(ah->ah_sc); - if (index >= 64) - return -EINVAL; - else if (index >= 32) - AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1, - (1 << (index - 32))); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); - - return 0; -} - -/** - * ath5k_hw_get_rx_filter - Get current rx filter - * - * @ah: The &struct ath5k_hw - * - * Returns the RX filter by reading rx filter and - * phy error filter registers. RX filter is used - * to set the allowed frame types that PCU will accept - * and pass to the driver. For a list of frame types - * check out reg.h. - */ -u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) -{ - u32 data, filter = 0; - - ATH5K_TRACE(ah->ah_sc); - filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER); - - /*Radar detection for 5212*/ - if (ah->ah_version == AR5K_AR5212) { - data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL); - - if (data & AR5K_PHY_ERR_FIL_RADAR) - filter |= AR5K_RX_FILTER_RADARERR; - if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK)) - filter |= AR5K_RX_FILTER_PHYERR; - } - - return filter; -} - -/** - * ath5k_hw_set_rx_filter - Set rx filter - * - * @ah: The &struct ath5k_hw - * @filter: RX filter mask (see reg.h) - * - * Sets RX filter register and also handles PHY error filter - * register on 5212 and newer chips so that we have proper PHY - * error reporting. - */ -void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) -{ - u32 data = 0; - - ATH5K_TRACE(ah->ah_sc); - - /* Set PHY error filter register on 5212*/ - if (ah->ah_version == AR5K_AR5212) { - if (filter & AR5K_RX_FILTER_RADARERR) - data |= AR5K_PHY_ERR_FIL_RADAR; - if (filter & AR5K_RX_FILTER_PHYERR) - data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK; - } - - /* - * The AR5210 uses promiscous mode to detect radar activity - */ - if (ah->ah_version == AR5K_AR5210 && - (filter & AR5K_RX_FILTER_RADARERR)) { - filter &= ~AR5K_RX_FILTER_RADARERR; - filter |= AR5K_RX_FILTER_PROM; - } - - /*Zero length DMA (phy error reporting) */ - if (data) - AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); - - /*Write RX Filter register*/ - ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER); - - /*Write PHY error filter register on 5212*/ - if (ah->ah_version == AR5K_AR5212) - ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL); - -} - - -/****************\ -* Beacon control * -\****************/ - -/** - * ath5k_hw_get_tsf32 - Get a 32bit TSF - * - * @ah: The &struct ath5k_hw - * - * Returns lower 32 bits of current TSF - */ -u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - return ath5k_hw_reg_read(ah, AR5K_TSF_L32); -} - -/** - * ath5k_hw_get_tsf64 - Get the full 64bit TSF - * - * @ah: The &struct ath5k_hw - * - * Returns the current TSF - */ -u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) -{ - u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32); - ATH5K_TRACE(ah->ah_sc); - - return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32); -} - -/** - * ath5k_hw_reset_tsf - Force a TSF reset - * - * @ah: The &struct ath5k_hw - * - * Forces a TSF reset on PCU - */ -void ath5k_hw_reset_tsf(struct ath5k_hw *ah) -{ - u32 val; - - ATH5K_TRACE(ah->ah_sc); - - val = ath5k_hw_reg_read(ah, AR5K_BEACON) | AR5K_BEACON_RESET_TSF; - - /* - * Each write to the RESET_TSF bit toggles a hardware internal - * signal to reset TSF, but if left high it will cause a TSF reset - * on the next chip reset as well. Thus we always write the value - * twice to clear the signal. - */ - ath5k_hw_reg_write(ah, val, AR5K_BEACON); - ath5k_hw_reg_write(ah, val, AR5K_BEACON); -} - -/* - * Initialize beacon timers - */ -void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) -{ - u32 timer1, timer2, timer3; - - ATH5K_TRACE(ah->ah_sc); - /* - * Set the additional timers by mode - */ - switch (ah->ah_op_mode) { - case NL80211_IFTYPE_MONITOR: - case NL80211_IFTYPE_STATION: - /* In STA mode timer1 is used as next wakeup - * timer and timer2 as next CFP duration start - * timer. Both in 1/8TUs. */ - /* TODO: PCF handling */ - if (ah->ah_version == AR5K_AR5210) { - timer1 = 0xffffffff; - timer2 = 0xffffffff; - } else { - timer1 = 0x0000ffff; - timer2 = 0x0007ffff; - } - /* Mark associated AP as PCF incapable for now */ - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PCF); - break; - case NL80211_IFTYPE_ADHOC: - AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, AR5K_TXCFG_ADHOC_BCN_ATIM); - default: - /* On non-STA modes timer1 is used as next DMA - * beacon alert (DBA) timer and timer2 as next - * software beacon alert. Both in 1/8TUs. */ - timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3; - timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3; - break; - } - - /* Timer3 marks the end of our ATIM window - * a zero length window is not allowed because - * we 'll get no beacons */ - timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1); - - /* - * Set the beacon register and enable all timers. - */ - /* When in AP mode zero timer0 to start TSF */ - if (ah->ah_op_mode == NL80211_IFTYPE_AP) - ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); - else - ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0); - ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1); - ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2); - ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3); - - /* Force a TSF reset if requested and enable beacons */ - if (interval & AR5K_BEACON_RESET_TSF) - ath5k_hw_reset_tsf(ah); - - ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD | - AR5K_BEACON_ENABLE), - AR5K_BEACON); - - /* Flush any pending BMISS interrupts on ISR by - * performing a clear-on-write operation on PISR - * register for the BMISS bit (writing a bit on - * ISR togles a reset for that bit and leaves - * the rest bits intact) */ - if (ah->ah_version == AR5K_AR5210) - ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_ISR); - else - ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_PISR); - - /* TODO: Set enchanced sleep registers on AR5212 - * based on vif->bss_conf params, until then - * disable power save reporting.*/ - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PWR_SV); - -} - -#if 0 -/* - * Set beacon timers - */ -int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, - const struct ath5k_beacon_state *state) -{ - u32 cfp_period, next_cfp, dtim, interval, next_beacon; - - /* - * TODO: should be changed through *state - * review struct ath5k_beacon_state struct - * - * XXX: These are used for cfp period bellow, are they - * ok ? Is it O.K. for tsf here to be 0 or should we use - * get_tsf ? - */ - u32 dtim_count = 0; /* XXX */ - u32 cfp_count = 0; /* XXX */ - u32 tsf = 0; /* XXX */ - - ATH5K_TRACE(ah->ah_sc); - /* Return on an invalid beacon state */ - if (state->bs_interval < 1) - return -EINVAL; - - interval = state->bs_interval; - dtim = state->bs_dtim_period; - - /* - * PCF support? - */ - if (state->bs_cfp_period > 0) { - /* - * Enable PCF mode and set the CFP - * (Contention Free Period) and timer registers - */ - cfp_period = state->bs_cfp_period * state->bs_dtim_period * - state->bs_interval; - next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) * - state->bs_interval; - - AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_DEFAULT_ANTENNA | - AR5K_STA_ID1_PCF); - ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD); - ath5k_hw_reg_write(ah, state->bs_cfp_max_duration, - AR5K_CFP_DUR); - ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period : - next_cfp)) << 3, AR5K_TIMER2); - } else { - /* Disable PCF mode */ - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_DEFAULT_ANTENNA | - AR5K_STA_ID1_PCF); - } - - /* - * Enable the beacon timer register - */ - ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0); - - /* - * Start the beacon timers - */ - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) & - ~(AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) | - AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0, - AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval, - AR5K_BEACON_PERIOD), AR5K_BEACON); - - /* - * Write new beacon miss threshold, if it appears to be valid - * XXX: Figure out right values for min <= bs_bmiss_threshold <= max - * and return if its not in range. We can test this by reading value and - * setting value to a largest value and seeing which values register. - */ - - AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS, - state->bs_bmiss_threshold); - - /* - * Set sleep control register - * XXX: Didn't find this in 5210 code but since this register - * exists also in ar5k's 5210 headers i leave it as common code. - */ - AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR, - (state->bs_sleep_duration - 3) << 3); - - /* - * Set enhanced sleep registers on 5212 - */ - if (ah->ah_version == AR5K_AR5212) { - if (state->bs_sleep_duration > state->bs_interval && - roundup(state->bs_sleep_duration, interval) == - state->bs_sleep_duration) - interval = state->bs_sleep_duration; - - if (state->bs_sleep_duration > dtim && (dtim == 0 || - roundup(state->bs_sleep_duration, dtim) == - state->bs_sleep_duration)) - dtim = state->bs_sleep_duration; - - if (interval > dtim) - return -EINVAL; - - next_beacon = interval == dtim ? state->bs_next_dtim : - state->bs_next_beacon; - - ath5k_hw_reg_write(ah, - AR5K_REG_SM((state->bs_next_dtim - 3) << 3, - AR5K_SLEEP0_NEXT_DTIM) | - AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) | - AR5K_SLEEP0_ENH_SLEEP_EN | - AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0); - - ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3, - AR5K_SLEEP1_NEXT_TIM) | - AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1); - - ath5k_hw_reg_write(ah, - AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) | - AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2); - } - - return 0; -} - -/* - * Reset beacon timers - */ -void ath5k_hw_reset_beacon(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - /* - * Disable beacon timer - */ - ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); - - /* - * Disable some beacon register values - */ - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF); - ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON); -} - -/* - * Wait for beacon queue to finish - */ -int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr) -{ - unsigned int i; - int ret; - - ATH5K_TRACE(ah->ah_sc); - - /* 5210 doesn't have QCU*/ - if (ah->ah_version == AR5K_AR5210) { - /* - * Wait for beaconn queue to finish by checking - * Control Register and Beacon Status Register. - */ - for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) { - if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F) - || - !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F)) - break; - udelay(10); - } - - /* Timeout... */ - if (i <= 0) { - /* - * Re-schedule the beacon queue - */ - ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1); - ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, - AR5K_BCR); - - return -EIO; - } - ret = 0; - } else { - /*5211/5212*/ - ret = ath5k_hw_register_timeout(ah, - AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON), - AR5K_QCU_STS_FRMPENDCNT, 0, false); - - if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON)) - return -EIO; - } - - return ret; -} -#endif - - -/*********************\ -* Key table functions * -\*********************/ - -/* - * Reset a key entry on the table - */ -int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry) -{ - unsigned int i, type; - u16 micentry = entry + AR5K_KEYTABLE_MIC_OFFSET; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); - - type = ath5k_hw_reg_read(ah, AR5K_KEYTABLE_TYPE(entry)); - - for (i = 0; i < AR5K_KEYCACHE_SIZE; i++) - ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i)); - - /* Reset associated MIC entry if TKIP - * is enabled located at offset (entry + 64) */ - if (type == AR5K_KEYTABLE_TYPE_TKIP) { - AR5K_ASSERT_ENTRY(micentry, AR5K_KEYTABLE_SIZE); - for (i = 0; i < AR5K_KEYCACHE_SIZE / 2 ; i++) - ath5k_hw_reg_write(ah, 0, - AR5K_KEYTABLE_OFF(micentry, i)); - } - - /* - * Set NULL encryption on AR5212+ - * - * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5) - * AR5K_KEYTABLE_TYPE_NULL -> 0x00000007 - * - * Note2: Windows driver (ndiswrapper) sets this to - * 0x00000714 instead of 0x00000007 - */ - if (ah->ah_version > AR5K_AR5211) { - ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, - AR5K_KEYTABLE_TYPE(entry)); - - if (type == AR5K_KEYTABLE_TYPE_TKIP) { - ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, - AR5K_KEYTABLE_TYPE(micentry)); - } - } - - return 0; -} - -/* - * Check if a table entry is valid - */ -int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); - - /* Check the validation flag at the end of the entry */ - return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) & - AR5K_KEYTABLE_VALID; -} - -static -int ath5k_keycache_type(const struct ieee80211_key_conf *key) -{ - switch (key->alg) { - case ALG_TKIP: - return AR5K_KEYTABLE_TYPE_TKIP; - case ALG_CCMP: - return AR5K_KEYTABLE_TYPE_CCM; - case ALG_WEP: - if (key->keylen == LEN_WEP40) - return AR5K_KEYTABLE_TYPE_40; - else if (key->keylen == LEN_WEP104) - return AR5K_KEYTABLE_TYPE_104; - } - return -EINVAL; -} - -/* - * Set a key entry on the table - */ -int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, - const struct ieee80211_key_conf *key, const u8 *mac) -{ - unsigned int i; - int keylen; - __le32 key_v[5] = {}; - __le32 key0 = 0, key1 = 0; - __le32 *rxmic, *txmic; - u32 keytype; - u16 micentry = entry + AR5K_KEYTABLE_MIC_OFFSET; - bool is_tkip; - const u8 *key_ptr; - - ATH5K_TRACE(ah->ah_sc); - - is_tkip = (key->alg == ALG_TKIP); - - /* - * key->keylen comes in from mac80211 in bytes. - * TKIP is 128 bit + 128 bit mic - */ - keylen = (is_tkip) ? (128 / 8) : key->keylen; - - if (entry > AR5K_KEYTABLE_SIZE || - (is_tkip && micentry > AR5K_KEYTABLE_SIZE)) - return -EOPNOTSUPP; - - if (unlikely(keylen > 16)) - return -EOPNOTSUPP; - - keytype = ath5k_keycache_type(key); - if (keytype < 0) - return keytype; - - /* - * each key block is 6 bytes wide, written as pairs of - * alternating 32 and 16 bit le values. - */ - key_ptr = key->key; - for (i = 0; keylen >= 6; keylen -= 6) { - memcpy(&key_v[i], key_ptr, 6); - i += 2; - key_ptr += 6; - } - if (keylen) - memcpy(&key_v[i], key_ptr, keylen); - - /* intentionally corrupt key until mic is installed */ - if (is_tkip) { - key0 = key_v[0] = ~key_v[0]; - key1 = key_v[1] = ~key_v[1]; - } - - for (i = 0; i < ARRAY_SIZE(key_v); i++) - ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]), - AR5K_KEYTABLE_OFF(entry, i)); - - ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry)); - - if (is_tkip) { - /* Install rx/tx MIC */ - rxmic = (__le32 *) &key->key[16]; - txmic = (__le32 *) &key->key[24]; - - if (ah->ah_combined_mic) { - key_v[0] = rxmic[0]; - key_v[1] = cpu_to_le32(le32_to_cpu(txmic[0]) >> 16); - key_v[2] = rxmic[1]; - key_v[3] = cpu_to_le32(le32_to_cpu(txmic[0]) & 0xffff); - key_v[4] = txmic[1]; - } else { - key_v[0] = rxmic[0]; - key_v[1] = 0; - key_v[2] = rxmic[1]; - key_v[3] = 0; - key_v[4] = 0; - } - for (i = 0; i < ARRAY_SIZE(key_v); i++) - ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]), - AR5K_KEYTABLE_OFF(micentry, i)); - - ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, - AR5K_KEYTABLE_TYPE(micentry)); - ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_MAC0(micentry)); - ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_MAC1(micentry)); - - /* restore first 2 words of key */ - ath5k_hw_reg_write(ah, le32_to_cpu(~key0), - AR5K_KEYTABLE_OFF(entry, 0)); - ath5k_hw_reg_write(ah, le32_to_cpu(~key1), - AR5K_KEYTABLE_OFF(entry, 1)); - } - - return ath5k_hw_set_key_lladdr(ah, entry, mac); -} - -int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac) -{ - u32 low_id, high_id; - - ATH5K_TRACE(ah->ah_sc); - /* Invalid entry (key table overflow) */ - AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); - - /* MAC may be NULL if it's a broadcast key. In this case no need to - * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */ - if (unlikely(mac == NULL)) { - low_id = 0xffffffff; - high_id = 0xffff | AR5K_KEYTABLE_VALID; - } else { - low_id = AR5K_LOW_ID(mac); - high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID; - } - - ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry)); - ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry)); - - return 0; -} - diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c deleted file mode 100644 index 7ba18e09463..00000000000 --- a/drivers/net/wireless/ath5k/phy.c +++ /dev/null @@ -1,2506 +0,0 @@ -/* - * PHY functions - * - * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#define _ATH5K_PHY - -#include <linux/delay.h> - -#include "ath5k.h" -#include "reg.h" -#include "base.h" - -/* Struct to hold initial RF register values (RF Banks) */ -struct ath5k_ini_rf { - u8 rf_bank; /* check out ath5k_reg.h */ - u16 rf_register; /* register address */ - u32 rf_value[5]; /* register value for different modes (above) */ -}; - -/* - * Mode-specific RF Gain table (64bytes) for RF5111/5112 - * (RF5110 only comes with AR5210 and only supports a/turbo a mode so initial - * RF Gain values are included in AR5K_AR5210_INI) - */ -struct ath5k_ini_rfgain { - u16 rfg_register; /* RF Gain register address */ - u32 rfg_value[2]; /* [freq (see below)] */ -}; - -struct ath5k_gain_opt { - u32 go_default; - u32 go_steps_count; - const struct ath5k_gain_opt_step go_step[AR5K_GAIN_STEP_COUNT]; -}; - -/* RF5111 mode-specific init registers */ -static const struct ath5k_ini_rf rfregs_5111[] = { - { 0, 0x989c, - /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00380000, 0x00380000, 0x00380000, 0x00380000, 0x00380000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x000000c0, 0x00000080, 0x00000080 } }, - { 0, 0x989c, - { 0x000400f9, 0x000400f9, 0x000400ff, 0x000400fd, 0x000400fd } }, - { 0, 0x98d4, - { 0x00000000, 0x00000000, 0x00000004, 0x00000004, 0x00000004 } }, - { 1, 0x98d4, - { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, - { 2, 0x98d4, - { 0x00000010, 0x00000014, 0x00000010, 0x00000010, 0x00000014 } }, - { 3, 0x98d8, - { 0x00601068, 0x00601068, 0x00601068, 0x00601068, 0x00601068 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } }, - { 6, 0x989c, - { 0x04000000, 0x04000000, 0x04000000, 0x04000000, 0x04000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x0a000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x003800c0, 0x00380080, 0x023800c0, 0x003800c0, 0x003800c0 } }, - { 6, 0x989c, - { 0x00020006, 0x00020006, 0x00000006, 0x00020006, 0x00020006 } }, - { 6, 0x989c, - { 0x00000089, 0x00000089, 0x00000089, 0x00000089, 0x00000089 } }, - { 6, 0x989c, - { 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0 } }, - { 6, 0x989c, - { 0x00040007, 0x00040007, 0x00040007, 0x00040007, 0x00040007 } }, - { 6, 0x98d4, - { 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a } }, - { 7, 0x989c, - { 0x00000040, 0x00000048, 0x00000040, 0x00000040, 0x00000040 } }, - { 7, 0x989c, - { 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 } }, - { 7, 0x989c, - { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } }, - { 7, 0x989c, - { 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f } }, - { 7, 0x989c, - { 0x000000f1, 0x000000f1, 0x00000061, 0x000000f1, 0x000000f1 } }, - { 7, 0x989c, - { 0x0000904f, 0x0000904f, 0x0000904c, 0x0000904f, 0x0000904f } }, - { 7, 0x989c, - { 0x0000125a, 0x0000125a, 0x0000129a, 0x0000125a, 0x0000125a } }, - { 7, 0x98cc, - { 0x0000000e, 0x0000000e, 0x0000000f, 0x0000000e, 0x0000000e } }, -}; - -/* Initial RF Gain settings for RF5111 */ -static const struct ath5k_ini_rfgain rfgain_5111[] = { - /* 5Ghz 2Ghz */ - { AR5K_RF_GAIN(0), { 0x000001a9, 0x00000000 } }, - { AR5K_RF_GAIN(1), { 0x000001e9, 0x00000040 } }, - { AR5K_RF_GAIN(2), { 0x00000029, 0x00000080 } }, - { AR5K_RF_GAIN(3), { 0x00000069, 0x00000150 } }, - { AR5K_RF_GAIN(4), { 0x00000199, 0x00000190 } }, - { AR5K_RF_GAIN(5), { 0x000001d9, 0x000001d0 } }, - { AR5K_RF_GAIN(6), { 0x00000019, 0x00000010 } }, - { AR5K_RF_GAIN(7), { 0x00000059, 0x00000044 } }, - { AR5K_RF_GAIN(8), { 0x00000099, 0x00000084 } }, - { AR5K_RF_GAIN(9), { 0x000001a5, 0x00000148 } }, - { AR5K_RF_GAIN(10), { 0x000001e5, 0x00000188 } }, - { AR5K_RF_GAIN(11), { 0x00000025, 0x000001c8 } }, - { AR5K_RF_GAIN(12), { 0x000001c8, 0x00000014 } }, - { AR5K_RF_GAIN(13), { 0x00000008, 0x00000042 } }, - { AR5K_RF_GAIN(14), { 0x00000048, 0x00000082 } }, - { AR5K_RF_GAIN(15), { 0x00000088, 0x00000178 } }, - { AR5K_RF_GAIN(16), { 0x00000198, 0x000001b8 } }, - { AR5K_RF_GAIN(17), { 0x000001d8, 0x000001f8 } }, - { AR5K_RF_GAIN(18), { 0x00000018, 0x00000012 } }, - { AR5K_RF_GAIN(19), { 0x00000058, 0x00000052 } }, - { AR5K_RF_GAIN(20), { 0x00000098, 0x00000092 } }, - { AR5K_RF_GAIN(21), { 0x000001a4, 0x0000017c } }, - { AR5K_RF_GAIN(22), { 0x000001e4, 0x000001bc } }, - { AR5K_RF_GAIN(23), { 0x00000024, 0x000001fc } }, - { AR5K_RF_GAIN(24), { 0x00000064, 0x0000000a } }, - { AR5K_RF_GAIN(25), { 0x000000a4, 0x0000004a } }, - { AR5K_RF_GAIN(26), { 0x000000e4, 0x0000008a } }, - { AR5K_RF_GAIN(27), { 0x0000010a, 0x0000015a } }, - { AR5K_RF_GAIN(28), { 0x0000014a, 0x0000019a } }, - { AR5K_RF_GAIN(29), { 0x0000018a, 0x000001da } }, - { AR5K_RF_GAIN(30), { 0x000001ca, 0x0000000e } }, - { AR5K_RF_GAIN(31), { 0x0000000a, 0x0000004e } }, - { AR5K_RF_GAIN(32), { 0x0000004a, 0x0000008e } }, - { AR5K_RF_GAIN(33), { 0x0000008a, 0x0000015e } }, - { AR5K_RF_GAIN(34), { 0x000001ba, 0x0000019e } }, - { AR5K_RF_GAIN(35), { 0x000001fa, 0x000001de } }, - { AR5K_RF_GAIN(36), { 0x0000003a, 0x00000009 } }, - { AR5K_RF_GAIN(37), { 0x0000007a, 0x00000049 } }, - { AR5K_RF_GAIN(38), { 0x00000186, 0x00000089 } }, - { AR5K_RF_GAIN(39), { 0x000001c6, 0x00000179 } }, - { AR5K_RF_GAIN(40), { 0x00000006, 0x000001b9 } }, - { AR5K_RF_GAIN(41), { 0x00000046, 0x000001f9 } }, - { AR5K_RF_GAIN(42), { 0x00000086, 0x00000039 } }, - { AR5K_RF_GAIN(43), { 0x000000c6, 0x00000079 } }, - { AR5K_RF_GAIN(44), { 0x000000c6, 0x000000b9 } }, - { AR5K_RF_GAIN(45), { 0x000000c6, 0x000001bd } }, - { AR5K_RF_GAIN(46), { 0x000000c6, 0x000001fd } }, - { AR5K_RF_GAIN(47), { 0x000000c6, 0x0000003d } }, - { AR5K_RF_GAIN(48), { 0x000000c6, 0x0000007d } }, - { AR5K_RF_GAIN(49), { 0x000000c6, 0x000000bd } }, - { AR5K_RF_GAIN(50), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(51), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(52), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(53), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(54), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(55), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(56), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(57), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(58), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(59), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(60), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(61), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(62), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(63), { 0x000000c6, 0x000000fd } }, -}; - -static const struct ath5k_gain_opt rfgain_opt_5111 = { - 4, - 9, - { - { { 4, 1, 1, 1 }, 6 }, - { { 4, 0, 1, 1 }, 4 }, - { { 3, 1, 1, 1 }, 3 }, - { { 4, 0, 0, 1 }, 1 }, - { { 4, 1, 1, 0 }, 0 }, - { { 4, 0, 1, 0 }, -2 }, - { { 3, 1, 1, 0 }, -3 }, - { { 4, 0, 0, 0 }, -4 }, - { { 2, 1, 1, 0 }, -6 } - } -}; - -/* RF5112 mode-specific init registers */ -static const struct ath5k_ini_rf rfregs_5112[] = { - { 1, 0x98d4, - /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, - { 2, 0x98d0, - { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } }, - { 3, 0x98dc, - { 0x00a0c0c0, 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0, 0x00e0c0c0 } }, - { 6, 0x989c, - { 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000 } }, - { 6, 0x989c, - { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00660000, 0x00660000, 0x00660000, 0x00660000, 0x00660000 } }, - { 6, 0x989c, - { 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000 } }, - { 6, 0x989c, - { 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000 } }, - { 6, 0x989c, - { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } }, - { 6, 0x989c, - { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } }, - { 6, 0x989c, - { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000 } }, - { 6, 0x989c, - { 0x00600000, 0x00600000, 0x00600000, 0x00600000, 0x00600000 } }, - { 6, 0x989c, - { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } }, - { 6, 0x989c, - { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } }, - { 6, 0x989c, - { 0x00640000, 0x00640000, 0x00640000, 0x00640000, 0x00640000 } }, - { 6, 0x989c, - { 0x00200000, 0x00200000, 0x00200000, 0x00200000, 0x00200000 } }, - { 6, 0x989c, - { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } }, - { 6, 0x989c, - { 0x00250000, 0x00250000, 0x00250000, 0x00250000, 0x00250000 } }, - { 6, 0x989c, - { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } }, - { 6, 0x989c, - { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } }, - { 6, 0x989c, - { 0x00510000, 0x00510000, 0x00510000, 0x00510000, 0x00510000 } }, - { 6, 0x989c, - { 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000 } }, - { 6, 0x989c, - { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } }, - { 6, 0x989c, - { 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000 } }, - { 6, 0x989c, - { 0x00400000, 0x00400000, 0x00400000, 0x00400000, 0x00400000 } }, - { 6, 0x989c, - { 0x03090000, 0x03090000, 0x03090000, 0x03090000, 0x03090000 } }, - { 6, 0x989c, - { 0x06000000, 0x06000000, 0x06000000, 0x06000000, 0x06000000 } }, - { 6, 0x989c, - { 0x000000b0, 0x000000b0, 0x000000a8, 0x000000a8, 0x000000a8 } }, - { 6, 0x989c, - { 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e } }, - { 6, 0x989c, - { 0x006c4a41, 0x006c4a41, 0x006c4af1, 0x006c4a61, 0x006c4a61 } }, - { 6, 0x989c, - { 0x0050892a, 0x0050892a, 0x0050892b, 0x0050892b, 0x0050892b } }, - { 6, 0x989c, - { 0x00842400, 0x00842400, 0x00842400, 0x00842400, 0x00842400 } }, - { 6, 0x989c, - { 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200 } }, - { 6, 0x98d0, - { 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c } }, - { 7, 0x989c, - { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } }, - { 7, 0x989c, - { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } }, - { 7, 0x989c, - { 0x0000000a, 0x0000000a, 0x00000012, 0x00000012, 0x00000012 } }, - { 7, 0x989c, - { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } }, - { 7, 0x989c, - { 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1 } }, - { 7, 0x989c, - { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } }, - { 7, 0x989c, - { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } }, - { 7, 0x989c, - { 0x00000022, 0x00000022, 0x00000022, 0x00000022, 0x00000022 } }, - { 7, 0x989c, - { 0x00000092, 0x00000092, 0x00000092, 0x00000092, 0x00000092 } }, - { 7, 0x989c, - { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } }, - { 7, 0x989c, - { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } }, - { 7, 0x989c, - { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } }, - { 7, 0x98c4, - { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } }, -}; - -/* RF5112A mode-specific init registers */ -static const struct ath5k_ini_rf rfregs_5112a[] = { - { 1, 0x98d4, - /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, - { 2, 0x98d0, - { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } }, - { 3, 0x98dc, - { 0x00a0c0c0, 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0, 0x00e0c0c0 } }, - { 6, 0x989c, - { 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00800000, 0x00800000, 0x00800000, 0x00800000, 0x00800000 } }, - { 6, 0x989c, - { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } }, - { 6, 0x989c, - { 0x00010000, 0x00010000, 0x00010000, 0x00010000, 0x00010000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00180000, 0x00180000, 0x00180000, 0x00180000, 0x00180000 } }, - { 6, 0x989c, - { 0x00600000, 0x00600000, 0x006e0000, 0x006e0000, 0x006e0000 } }, - { 6, 0x989c, - { 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000 } }, - { 6, 0x989c, - { 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000 } }, - { 6, 0x989c, - { 0x04480000, 0x04480000, 0x04480000, 0x04480000, 0x04480000 } }, - { 6, 0x989c, - { 0x00220000, 0x00220000, 0x00220000, 0x00220000, 0x00220000 } }, - { 6, 0x989c, - { 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000 } }, - { 6, 0x989c, - { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } }, - { 6, 0x989c, - { 0x00190000, 0x00190000, 0x00190000, 0x00190000, 0x00190000 } }, - { 6, 0x989c, - { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } }, - { 6, 0x989c, - { 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000 } }, - { 6, 0x989c, - { 0x00990000, 0x00990000, 0x00990000, 0x00990000, 0x00990000 } }, - { 6, 0x989c, - { 0x00500000, 0x00500000, 0x00500000, 0x00500000, 0x00500000 } }, - { 6, 0x989c, - { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } }, - { 6, 0x989c, - { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } }, - { 6, 0x989c, - { 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000 } }, - { 6, 0x989c, - { 0x01740000, 0x01740000, 0x01740000, 0x01740000, 0x01740000 } }, - { 6, 0x989c, - { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } }, - { 6, 0x989c, - { 0x86280000, 0x86280000, 0x86280000, 0x86280000, 0x86280000 } }, - { 6, 0x989c, - { 0x31840000, 0x31840000, 0x31840000, 0x31840000, 0x31840000 } }, - { 6, 0x989c, - { 0x00020080, 0x00020080, 0x00020080, 0x00020080, 0x00020080 } }, - { 6, 0x989c, - { 0x00080009, 0x00080009, 0x00080009, 0x00080009, 0x00080009 } }, - { 6, 0x989c, - { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2 } }, - { 6, 0x989c, - { 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084 } }, - { 6, 0x989c, - { 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4 } }, - { 6, 0x989c, - { 0x00119220, 0x00119220, 0x00119220, 0x00119220, 0x00119220 } }, - { 6, 0x989c, - { 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800 } }, - { 6, 0x98d8, - { 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230 } }, - { 7, 0x989c, - { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } }, - { 7, 0x989c, - { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } }, - { 7, 0x989c, - { 0x00000012, 0x00000012, 0x00000012, 0x00000012, 0x00000012 } }, - { 7, 0x989c, - { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } }, - { 7, 0x989c, - { 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9 } }, - { 7, 0x989c, - { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } }, - { 7, 0x989c, - { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } }, - { 7, 0x989c, - { 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2 } }, - { 7, 0x989c, - { 0x00000052, 0x00000052, 0x00000052, 0x00000052, 0x00000052 } }, - { 7, 0x989c, - { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } }, - { 7, 0x989c, - { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } }, - { 7, 0x989c, - { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } }, - { 7, 0x98c4, - { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } }, -}; - - -static const struct ath5k_ini_rf rfregs_2112a[] = { - { 1, AR5K_RF_BUFFER_CONTROL_4, - /* mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020 } }, - { 2, AR5K_RF_BUFFER_CONTROL_3, - { 0x03060408, 0x03060408, 0x03070408 } }, - { 3, AR5K_RF_BUFFER_CONTROL_6, - { 0x00e020c0, 0x00e020c0, 0x00e020c0 } }, - { 6, AR5K_RF_BUFFER, - { 0x0a000000, 0x0a000000, 0x0a000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00800000, 0x00800000, 0x00800000 } }, - { 6, AR5K_RF_BUFFER, - { 0x002a0000, 0x002a0000, 0x002a0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00010000, 0x00010000, 0x00010000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00180000, 0x00180000, 0x00180000 } }, - { 6, AR5K_RF_BUFFER, - { 0x006e0000, 0x006e0000, 0x006e0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00c70000, 0x00c70000, 0x00c70000 } }, - { 6, AR5K_RF_BUFFER, - { 0x004b0000, 0x004b0000, 0x004b0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x04480000, 0x04480000, 0x04480000 } }, - { 6, AR5K_RF_BUFFER, - { 0x002a0000, 0x002a0000, 0x002a0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00e40000, 0x00e40000, 0x00e40000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00fc0000, 0x00fc0000, 0x00fc0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x043f0000, 0x043f0000, 0x043f0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x0c0c0000, 0x0c0c0000, 0x0c0c0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x02190000, 0x02190000, 0x02190000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00240000, 0x00240000, 0x00240000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00b40000, 0x00b40000, 0x00b40000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00990000, 0x00990000, 0x00990000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00500000, 0x00500000, 0x00500000 } }, - { 6, AR5K_RF_BUFFER, - { 0x002a0000, 0x002a0000, 0x002a0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00120000, 0x00120000, 0x00120000 } }, - { 6, AR5K_RF_BUFFER, - { 0xc0320000, 0xc0320000, 0xc0320000 } }, - { 6, AR5K_RF_BUFFER, - { 0x01740000, 0x01740000, 0x01740000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00110000, 0x00110000, 0x00110000 } }, - { 6, AR5K_RF_BUFFER, - { 0x86280000, 0x86280000, 0x86280000 } }, - { 6, AR5K_RF_BUFFER, - { 0x31840000, 0x31840000, 0x31840000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00f20080, 0x00f20080, 0x00f20080 } }, - { 6, AR5K_RF_BUFFER, - { 0x00070019, 0x00070019, 0x00070019 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x000000b2, 0x000000b2, 0x000000b2 } }, - { 6, AR5K_RF_BUFFER, - { 0x00b02184, 0x00b02184, 0x00b02184 } }, - { 6, AR5K_RF_BUFFER, - { 0x004125a4, 0x004125a4, 0x004125a4 } }, - { 6, AR5K_RF_BUFFER, - { 0x00119220, 0x00119220, 0x00119220 } }, - { 6, AR5K_RF_BUFFER, - { 0x001a4800, 0x001a4800, 0x001a4800 } }, - { 6, AR5K_RF_BUFFER_CONTROL_5, - { 0x000b0230, 0x000b0230, 0x000b0230 } }, - { 7, AR5K_RF_BUFFER, - { 0x00000094, 0x00000094, 0x00000094 } }, - { 7, AR5K_RF_BUFFER, - { 0x00000091, 0x00000091, 0x00000091 } }, - { 7, AR5K_RF_BUFFER, - { 0x00000012, 0x00000012, 0x00000012 } }, - { 7, AR5K_RF_BUFFER, - { 0x00000080, 0x00000080, 0x00000080 } }, - { 7, AR5K_RF_BUFFER, - { 0x000000d9, 0x000000d9, 0x000000d9 } }, - { 7, AR5K_RF_BUFFER, - { 0x00000060, 0x00000060, 0x00000060 } }, - { 7, AR5K_RF_BUFFER, - { 0x000000f0, 0x000000f0, 0x000000f0 } }, - { 7, AR5K_RF_BUFFER, - { 0x000000a2, 0x000000a2, 0x000000a2 } }, - { 7, AR5K_RF_BUFFER, - { 0x00000052, 0x00000052, 0x00000052 } }, - { 7, AR5K_RF_BUFFER, - { 0x000000d4, 0x000000d4, 0x000000d4 } }, - { 7, AR5K_RF_BUFFER, - { 0x000014cc, 0x000014cc, 0x000014cc } }, - { 7, AR5K_RF_BUFFER, - { 0x0000048c, 0x0000048c, 0x0000048c } }, - { 7, AR5K_RF_BUFFER_CONTROL_1, - { 0x00000003, 0x00000003, 0x00000003 } }, -}; - -/* RF5413/5414 mode-specific init registers */ -static const struct ath5k_ini_rf rfregs_5413[] = { - { 1, 0x98d4, - /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, - { 2, 0x98d0, - { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } }, - { 3, 0x98dc, - { 0x00a000c0, 0x00a000c0, 0x00e000c0, 0x00e000c0, 0x00e000c0 } }, - { 6, 0x989c, - { 0x33000000, 0x33000000, 0x33000000, 0x33000000, 0x33000000 } }, - { 6, 0x989c, - { 0x01000000, 0x01000000, 0x01000000, 0x01000000, 0x01000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000 } }, - { 6, 0x989c, - { 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000 } }, - { 6, 0x989c, - { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } }, - { 6, 0x989c, - { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } }, - { 6, 0x989c, - { 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000 } }, - { 6, 0x989c, - { 0x00610000, 0x00610000, 0x00610000, 0x00610000, 0x00610000 } }, - { 6, 0x989c, - { 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000 } }, - { 6, 0x989c, - { 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000 } }, - { 6, 0x989c, - { 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000 } }, - { 6, 0x989c, - { 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000 } }, - { 6, 0x989c, - { 0x00770000, 0x00770000, 0x00770000, 0x00770000, 0x00770000 } }, - { 6, 0x989c, - { 0x00440000, 0x00440000, 0x00440000, 0x00440000, 0x00440000 } }, - { 6, 0x989c, - { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } }, - { 6, 0x989c, - { 0x00100080, 0x00100080, 0x00100080, 0x00100080, 0x00100080 } }, - { 6, 0x989c, - { 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034 } }, - { 6, 0x989c, - { 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0 } }, - { 6, 0x989c, - { 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f } }, - { 6, 0x989c, - { 0x00510040, 0x00510040, 0x005100a0, 0x005100a0, 0x005100a0 } }, - { 6, 0x989c, - { 0x0050006a, 0x0050006a, 0x005000dd, 0x005000dd, 0x005000dd } }, - { 6, 0x989c, - { 0x00000001, 0x00000001, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00004044, 0x00004044, 0x00004044, 0x00004044, 0x00004044 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0 } }, - { 6, 0x989c, - { 0x00002c00, 0x00002c00, 0x00003600, 0x00003600, 0x00003600 } }, - { 6, 0x98c8, - { 0x00000403, 0x00000403, 0x00040403, 0x00040403, 0x00040403 } }, - { 7, 0x989c, - { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } }, - { 7, 0x989c, - { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } }, - { 7, 0x98cc, - { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } }, -}; - -/* RF2413/2414 mode-specific init registers */ -static const struct ath5k_ini_rf rfregs_2413[] = { - { 1, AR5K_RF_BUFFER_CONTROL_4, - /* mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020 } }, - { 2, AR5K_RF_BUFFER_CONTROL_3, - { 0x02001408, 0x02001408, 0x02001408 } }, - { 3, AR5K_RF_BUFFER_CONTROL_6, - { 0x00e020c0, 0x00e020c0, 0x00e020c0 } }, - { 6, AR5K_RF_BUFFER, - { 0xf0000000, 0xf0000000, 0xf0000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x03000000, 0x03000000, 0x03000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x40400000, 0x40400000, 0x40400000 } }, - { 6, AR5K_RF_BUFFER, - { 0x65050000, 0x65050000, 0x65050000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00420000, 0x00420000, 0x00420000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00b50000, 0x00b50000, 0x00b50000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00030000, 0x00030000, 0x00030000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00f70000, 0x00f70000, 0x00f70000 } }, - { 6, AR5K_RF_BUFFER, - { 0x009d0000, 0x009d0000, 0x009d0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00220000, 0x00220000, 0x00220000 } }, - { 6, AR5K_RF_BUFFER, - { 0x04220000, 0x04220000, 0x04220000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00230018, 0x00230018, 0x00230018 } }, - { 6, AR5K_RF_BUFFER, - { 0x00280050, 0x00280050, 0x00280050 } }, - { 6, AR5K_RF_BUFFER, - { 0x005000c3, 0x005000c3, 0x005000c3 } }, - { 6, AR5K_RF_BUFFER, - { 0x0004007f, 0x0004007f, 0x0004007f } }, - { 6, AR5K_RF_BUFFER, - { 0x00000458, 0x00000458, 0x00000458 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x0000c000, 0x0000c000, 0x0000c000 } }, - { 6, AR5K_RF_BUFFER_CONTROL_5, - { 0x00400230, 0x00400230, 0x00400230 } }, - { 7, AR5K_RF_BUFFER, - { 0x00006400, 0x00006400, 0x00006400 } }, - { 7, AR5K_RF_BUFFER, - { 0x00000800, 0x00000800, 0x00000800 } }, - { 7, AR5K_RF_BUFFER_CONTROL_2, - { 0x0000000e, 0x0000000e, 0x0000000e } }, -}; - -/* RF2425 mode-specific init registers */ -static const struct ath5k_ini_rf rfregs_2425[] = { - { 1, AR5K_RF_BUFFER_CONTROL_4, - /* mode g mode gTurbo */ - { 0x00000020, 0x00000020 } }, - { 2, AR5K_RF_BUFFER_CONTROL_3, - { 0x02001408, 0x02001408 } }, - { 3, AR5K_RF_BUFFER_CONTROL_6, - { 0x00e020c0, 0x00e020c0 } }, - { 6, AR5K_RF_BUFFER, - { 0x10000000, 0x10000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x002a0000, 0x002a0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00100000, 0x00100000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00020000, 0x00020000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00730000, 0x00730000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00f80000, 0x00f80000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00e70000, 0x00e70000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00140000, 0x00140000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00910040, 0x00910040 } }, - { 6, AR5K_RF_BUFFER, - { 0x0007001a, 0x0007001a } }, - { 6, AR5K_RF_BUFFER, - { 0x00410000, 0x00410000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00810060, 0x00810060 } }, - { 6, AR5K_RF_BUFFER, - { 0x00020803, 0x00020803 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00001660, 0x00001660 } }, - { 6, AR5K_RF_BUFFER, - { 0x00001688, 0x00001688 } }, - { 6, AR5K_RF_BUFFER_CONTROL_1, - { 0x00000001, 0x00000001 } }, - { 7, AR5K_RF_BUFFER, - { 0x00006400, 0x00006400 } }, - { 7, AR5K_RF_BUFFER, - { 0x00000800, 0x00000800 } }, - { 7, AR5K_RF_BUFFER_CONTROL_2, - { 0x0000000e, 0x0000000e } }, -}; - -/* Initial RF Gain settings for RF5112 */ -static const struct ath5k_ini_rfgain rfgain_5112[] = { - /* 5Ghz 2Ghz */ - { AR5K_RF_GAIN(0), { 0x00000007, 0x00000007 } }, - { AR5K_RF_GAIN(1), { 0x00000047, 0x00000047 } }, - { AR5K_RF_GAIN(2), { 0x00000087, 0x00000087 } }, - { AR5K_RF_GAIN(3), { 0x000001a0, 0x000001a0 } }, - { AR5K_RF_GAIN(4), { 0x000001e0, 0x000001e0 } }, - { AR5K_RF_GAIN(5), { 0x00000020, 0x00000020 } }, - { AR5K_RF_GAIN(6), { 0x00000060, 0x00000060 } }, - { AR5K_RF_GAIN(7), { 0x000001a1, 0x000001a1 } }, - { AR5K_RF_GAIN(8), { 0x000001e1, 0x000001e1 } }, - { AR5K_RF_GAIN(9), { 0x00000021, 0x00000021 } }, - { AR5K_RF_GAIN(10), { 0x00000061, 0x00000061 } }, - { AR5K_RF_GAIN(11), { 0x00000162, 0x00000162 } }, - { AR5K_RF_GAIN(12), { 0x000001a2, 0x000001a2 } }, - { AR5K_RF_GAIN(13), { 0x000001e2, 0x000001e2 } }, - { AR5K_RF_GAIN(14), { 0x00000022, 0x00000022 } }, - { AR5K_RF_GAIN(15), { 0x00000062, 0x00000062 } }, - { AR5K_RF_GAIN(16), { 0x00000163, 0x00000163 } }, - { AR5K_RF_GAIN(17), { 0x000001a3, 0x000001a3 } }, - { AR5K_RF_GAIN(18), { 0x000001e3, 0x000001e3 } }, - { AR5K_RF_GAIN(19), { 0x00000023, 0x00000023 } }, - { AR5K_RF_GAIN(20), { 0x00000063, 0x00000063 } }, - { AR5K_RF_GAIN(21), { 0x00000184, 0x00000184 } }, - { AR5K_RF_GAIN(22), { 0x000001c4, 0x000001c4 } }, - { AR5K_RF_GAIN(23), { 0x00000004, 0x00000004 } }, - { AR5K_RF_GAIN(24), { 0x000001ea, 0x0000000b } }, - { AR5K_RF_GAIN(25), { 0x0000002a, 0x0000004b } }, - { AR5K_RF_GAIN(26), { 0x0000006a, 0x0000008b } }, - { AR5K_RF_GAIN(27), { 0x000000aa, 0x000001ac } }, - { AR5K_RF_GAIN(28), { 0x000001ab, 0x000001ec } }, - { AR5K_RF_GAIN(29), { 0x000001eb, 0x0000002c } }, - { AR5K_RF_GAIN(30), { 0x0000002b, 0x00000012 } }, - { AR5K_RF_GAIN(31), { 0x0000006b, 0x00000052 } }, - { AR5K_RF_GAIN(32), { 0x000000ab, 0x00000092 } }, - { AR5K_RF_GAIN(33), { 0x000001ac, 0x00000193 } }, - { AR5K_RF_GAIN(34), { 0x000001ec, 0x000001d3 } }, - { AR5K_RF_GAIN(35), { 0x0000002c, 0x00000013 } }, - { AR5K_RF_GAIN(36), { 0x0000003a, 0x00000053 } }, - { AR5K_RF_GAIN(37), { 0x0000007a, 0x00000093 } }, - { AR5K_RF_GAIN(38), { 0x000000ba, 0x00000194 } }, - { AR5K_RF_GAIN(39), { 0x000001bb, 0x000001d4 } }, - { AR5K_RF_GAIN(40), { 0x000001fb, 0x00000014 } }, - { AR5K_RF_GAIN(41), { 0x0000003b, 0x0000003a } }, - { AR5K_RF_GAIN(42), { 0x0000007b, 0x0000007a } }, - { AR5K_RF_GAIN(43), { 0x000000bb, 0x000000ba } }, - { AR5K_RF_GAIN(44), { 0x000001bc, 0x000001bb } }, - { AR5K_RF_GAIN(45), { 0x000001fc, 0x000001fb } }, - { AR5K_RF_GAIN(46), { 0x0000003c, 0x0000003b } }, - { AR5K_RF_GAIN(47), { 0x0000007c, 0x0000007b } }, - { AR5K_RF_GAIN(48), { 0x000000bc, 0x000000bb } }, - { AR5K_RF_GAIN(49), { 0x000000fc, 0x000001bc } }, - { AR5K_RF_GAIN(50), { 0x000000fc, 0x000001fc } }, - { AR5K_RF_GAIN(51), { 0x000000fc, 0x0000003c } }, - { AR5K_RF_GAIN(52), { 0x000000fc, 0x0000007c } }, - { AR5K_RF_GAIN(53), { 0x000000fc, 0x000000bc } }, - { AR5K_RF_GAIN(54), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(55), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(56), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(57), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(58), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(59), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(60), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(61), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(62), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(63), { 0x000000fc, 0x000000fc } }, -}; - -/* Initial RF Gain settings for RF5413 */ -static const struct ath5k_ini_rfgain rfgain_5413[] = { - /* 5Ghz 2Ghz */ - { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } }, - { AR5K_RF_GAIN(1), { 0x00000040, 0x00000040 } }, - { AR5K_RF_GAIN(2), { 0x00000080, 0x00000080 } }, - { AR5K_RF_GAIN(3), { 0x000001a1, 0x00000161 } }, - { AR5K_RF_GAIN(4), { 0x000001e1, 0x000001a1 } }, - { AR5K_RF_GAIN(5), { 0x00000021, 0x000001e1 } }, - { AR5K_RF_GAIN(6), { 0x00000061, 0x00000021 } }, - { AR5K_RF_GAIN(7), { 0x00000188, 0x00000061 } }, - { AR5K_RF_GAIN(8), { 0x000001c8, 0x00000188 } }, - { AR5K_RF_GAIN(9), { 0x00000008, 0x000001c8 } }, - { AR5K_RF_GAIN(10), { 0x00000048, 0x00000008 } }, - { AR5K_RF_GAIN(11), { 0x00000088, 0x00000048 } }, - { AR5K_RF_GAIN(12), { 0x000001a9, 0x00000088 } }, - { AR5K_RF_GAIN(13), { 0x000001e9, 0x00000169 } }, - { AR5K_RF_GAIN(14), { 0x00000029, 0x000001a9 } }, - { AR5K_RF_GAIN(15), { 0x00000069, 0x000001e9 } }, - { AR5K_RF_GAIN(16), { 0x000001d0, 0x00000029 } }, - { AR5K_RF_GAIN(17), { 0x00000010, 0x00000069 } }, - { AR5K_RF_GAIN(18), { 0x00000050, 0x00000190 } }, - { AR5K_RF_GAIN(19), { 0x00000090, 0x000001d0 } }, - { AR5K_RF_GAIN(20), { 0x000001b1, 0x00000010 } }, - { AR5K_RF_GAIN(21), { 0x000001f1, 0x00000050 } }, - { AR5K_RF_GAIN(22), { 0x00000031, 0x00000090 } }, - { AR5K_RF_GAIN(23), { 0x00000071, 0x00000171 } }, - { AR5K_RF_GAIN(24), { 0x000001b8, 0x000001b1 } }, - { AR5K_RF_GAIN(25), { 0x000001f8, 0x000001f1 } }, - { AR5K_RF_GAIN(26), { 0x00000038, 0x00000031 } }, - { AR5K_RF_GAIN(27), { 0x00000078, 0x00000071 } }, - { AR5K_RF_GAIN(28), { 0x00000199, 0x00000198 } }, - { AR5K_RF_GAIN(29), { 0x000001d9, 0x000001d8 } }, - { AR5K_RF_GAIN(30), { 0x00000019, 0x00000018 } }, - { AR5K_RF_GAIN(31), { 0x00000059, 0x00000058 } }, - { AR5K_RF_GAIN(32), { 0x00000099, 0x00000098 } }, - { AR5K_RF_GAIN(33), { 0x000000d9, 0x00000179 } }, - { AR5K_RF_GAIN(34), { 0x000000f9, 0x000001b9 } }, - { AR5K_RF_GAIN(35), { 0x000000f9, 0x000001f9 } }, - { AR5K_RF_GAIN(36), { 0x000000f9, 0x00000039 } }, - { AR5K_RF_GAIN(37), { 0x000000f9, 0x00000079 } }, - { AR5K_RF_GAIN(38), { 0x000000f9, 0x000000b9 } }, - { AR5K_RF_GAIN(39), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(40), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(41), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(42), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(43), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(44), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(45), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(46), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(47), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(48), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(49), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(50), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(51), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(52), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(53), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(54), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(55), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(56), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(57), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(58), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(59), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(60), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(61), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(62), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(63), { 0x000000f9, 0x000000f9 } }, -}; - -/* Initial RF Gain settings for RF2413 */ -static const struct ath5k_ini_rfgain rfgain_2413[] = { - { AR5K_RF_GAIN(0), { 0x00000000 } }, - { AR5K_RF_GAIN(1), { 0x00000040 } }, - { AR5K_RF_GAIN(2), { 0x00000080 } }, - { AR5K_RF_GAIN(3), { 0x00000181 } }, - { AR5K_RF_GAIN(4), { 0x000001c1 } }, - { AR5K_RF_GAIN(5), { 0x00000001 } }, - { AR5K_RF_GAIN(6), { 0x00000041 } }, - { AR5K_RF_GAIN(7), { 0x00000081 } }, - { AR5K_RF_GAIN(8), { 0x00000168 } }, - { AR5K_RF_GAIN(9), { 0x000001a8 } }, - { AR5K_RF_GAIN(10), { 0x000001e8 } }, - { AR5K_RF_GAIN(11), { 0x00000028 } }, - { AR5K_RF_GAIN(12), { 0x00000068 } }, - { AR5K_RF_GAIN(13), { 0x00000189 } }, - { AR5K_RF_GAIN(14), { 0x000001c9 } }, - { AR5K_RF_GAIN(15), { 0x00000009 } }, - { AR5K_RF_GAIN(16), { 0x00000049 } }, - { AR5K_RF_GAIN(17), { 0x00000089 } }, - { AR5K_RF_GAIN(18), { 0x00000190 } }, - { AR5K_RF_GAIN(19), { 0x000001d0 } }, - { AR5K_RF_GAIN(20), { 0x00000010 } }, - { AR5K_RF_GAIN(21), { 0x00000050 } }, - { AR5K_RF_GAIN(22), { 0x00000090 } }, - { AR5K_RF_GAIN(23), { 0x00000191 } }, - { AR5K_RF_GAIN(24), { 0x000001d1 } }, - { AR5K_RF_GAIN(25), { 0x00000011 } }, - { AR5K_RF_GAIN(26), { 0x00000051 } }, - { AR5K_RF_GAIN(27), { 0x00000091 } }, - { AR5K_RF_GAIN(28), { 0x00000178 } }, - { AR5K_RF_GAIN(29), { 0x000001b8 } }, - { AR5K_RF_GAIN(30), { 0x000001f8 } }, - { AR5K_RF_GAIN(31), { 0x00000038 } }, - { AR5K_RF_GAIN(32), { 0x00000078 } }, - { AR5K_RF_GAIN(33), { 0x00000199 } }, - { AR5K_RF_GAIN(34), { 0x000001d9 } }, - { AR5K_RF_GAIN(35), { 0x00000019 } }, - { AR5K_RF_GAIN(36), { 0x00000059 } }, - { AR5K_RF_GAIN(37), { 0x00000099 } }, - { AR5K_RF_GAIN(38), { 0x000000d9 } }, - { AR5K_RF_GAIN(39), { 0x000000f9 } }, - { AR5K_RF_GAIN(40), { 0x000000f9 } }, - { AR5K_RF_GAIN(41), { 0x000000f9 } }, - { AR5K_RF_GAIN(42), { 0x000000f9 } }, - { AR5K_RF_GAIN(43), { 0x000000f9 } }, - { AR5K_RF_GAIN(44), { 0x000000f9 } }, - { AR5K_RF_GAIN(45), { 0x000000f9 } }, - { AR5K_RF_GAIN(46), { 0x000000f9 } }, - { AR5K_RF_GAIN(47), { 0x000000f9 } }, - { AR5K_RF_GAIN(48), { 0x000000f9 } }, - { AR5K_RF_GAIN(49), { 0x000000f9 } }, - { AR5K_RF_GAIN(50), { 0x000000f9 } }, - { AR5K_RF_GAIN(51), { 0x000000f9 } }, - { AR5K_RF_GAIN(52), { 0x000000f9 } }, - { AR5K_RF_GAIN(53), { 0x000000f9 } }, - { AR5K_RF_GAIN(54), { 0x000000f9 } }, - { AR5K_RF_GAIN(55), { 0x000000f9 } }, - { AR5K_RF_GAIN(56), { 0x000000f9 } }, - { AR5K_RF_GAIN(57), { 0x000000f9 } }, - { AR5K_RF_GAIN(58), { 0x000000f9 } }, - { AR5K_RF_GAIN(59), { 0x000000f9 } }, - { AR5K_RF_GAIN(60), { 0x000000f9 } }, - { AR5K_RF_GAIN(61), { 0x000000f9 } }, - { AR5K_RF_GAIN(62), { 0x000000f9 } }, - { AR5K_RF_GAIN(63), { 0x000000f9 } }, -}; - -/* Initial RF Gain settings for RF2425 */ -static const struct ath5k_ini_rfgain rfgain_2425[] = { - { AR5K_RF_GAIN(0), { 0x00000000 } }, - { AR5K_RF_GAIN(1), { 0x00000040 } }, - { AR5K_RF_GAIN(2), { 0x00000080 } }, - { AR5K_RF_GAIN(3), { 0x00000181 } }, - { AR5K_RF_GAIN(4), { 0x000001c1 } }, - { AR5K_RF_GAIN(5), { 0x00000001 } }, - { AR5K_RF_GAIN(6), { 0x00000041 } }, - { AR5K_RF_GAIN(7), { 0x00000081 } }, - { AR5K_RF_GAIN(8), { 0x00000188 } }, - { AR5K_RF_GAIN(9), { 0x000001c8 } }, - { AR5K_RF_GAIN(10), { 0x00000008 } }, - { AR5K_RF_GAIN(11), { 0x00000048 } }, - { AR5K_RF_GAIN(12), { 0x00000088 } }, - { AR5K_RF_GAIN(13), { 0x00000189 } }, - { AR5K_RF_GAIN(14), { 0x000001c9 } }, - { AR5K_RF_GAIN(15), { 0x00000009 } }, - { AR5K_RF_GAIN(16), { 0x00000049 } }, - { AR5K_RF_GAIN(17), { 0x00000089 } }, - { AR5K_RF_GAIN(18), { 0x000001b0 } }, - { AR5K_RF_GAIN(19), { 0x000001f0 } }, - { AR5K_RF_GAIN(20), { 0x00000030 } }, - { AR5K_RF_GAIN(21), { 0x00000070 } }, - { AR5K_RF_GAIN(22), { 0x00000171 } }, - { AR5K_RF_GAIN(23), { 0x000001b1 } }, - { AR5K_RF_GAIN(24), { 0x000001f1 } }, - { AR5K_RF_GAIN(25), { 0x00000031 } }, - { AR5K_RF_GAIN(26), { 0x00000071 } }, - { AR5K_RF_GAIN(27), { 0x000001b8 } }, - { AR5K_RF_GAIN(28), { 0x000001f8 } }, - { AR5K_RF_GAIN(29), { 0x00000038 } }, - { AR5K_RF_GAIN(30), { 0x00000078 } }, - { AR5K_RF_GAIN(31), { 0x000000b8 } }, - { AR5K_RF_GAIN(32), { 0x000001b9 } }, - { AR5K_RF_GAIN(33), { 0x000001f9 } }, - { AR5K_RF_GAIN(34), { 0x00000039 } }, - { AR5K_RF_GAIN(35), { 0x00000079 } }, - { AR5K_RF_GAIN(36), { 0x000000b9 } }, - { AR5K_RF_GAIN(37), { 0x000000f9 } }, - { AR5K_RF_GAIN(38), { 0x000000f9 } }, - { AR5K_RF_GAIN(39), { 0x000000f9 } }, - { AR5K_RF_GAIN(40), { 0x000000f9 } }, - { AR5K_RF_GAIN(41), { 0x000000f9 } }, - { AR5K_RF_GAIN(42), { 0x000000f9 } }, - { AR5K_RF_GAIN(43), { 0x000000f9 } }, - { AR5K_RF_GAIN(44), { 0x000000f9 } }, - { AR5K_RF_GAIN(45), { 0x000000f9 } }, - { AR5K_RF_GAIN(46), { 0x000000f9 } }, - { AR5K_RF_GAIN(47), { 0x000000f9 } }, - { AR5K_RF_GAIN(48), { 0x000000f9 } }, - { AR5K_RF_GAIN(49), { 0x000000f9 } }, - { AR5K_RF_GAIN(50), { 0x000000f9 } }, - { AR5K_RF_GAIN(51), { 0x000000f9 } }, - { AR5K_RF_GAIN(52), { 0x000000f9 } }, - { AR5K_RF_GAIN(53), { 0x000000f9 } }, - { AR5K_RF_GAIN(54), { 0x000000f9 } }, - { AR5K_RF_GAIN(55), { 0x000000f9 } }, - { AR5K_RF_GAIN(56), { 0x000000f9 } }, - { AR5K_RF_GAIN(57), { 0x000000f9 } }, - { AR5K_RF_GAIN(58), { 0x000000f9 } }, - { AR5K_RF_GAIN(59), { 0x000000f9 } }, - { AR5K_RF_GAIN(60), { 0x000000f9 } }, - { AR5K_RF_GAIN(61), { 0x000000f9 } }, - { AR5K_RF_GAIN(62), { 0x000000f9 } }, - { AR5K_RF_GAIN(63), { 0x000000f9 } }, -}; - -static const struct ath5k_gain_opt rfgain_opt_5112 = { - 1, - 8, - { - { { 3, 0, 0, 0, 0, 0, 0 }, 6 }, - { { 2, 0, 0, 0, 0, 0, 0 }, 0 }, - { { 1, 0, 0, 0, 0, 0, 0 }, -3 }, - { { 0, 0, 0, 0, 0, 0, 0 }, -6 }, - { { 0, 1, 1, 0, 0, 0, 0 }, -8 }, - { { 0, 1, 1, 0, 1, 1, 0 }, -10 }, - { { 0, 1, 0, 1, 1, 1, 0 }, -13 }, - { { 0, 1, 0, 1, 1, 0, 1 }, -16 }, - } -}; - -/* - * Used to modify RF Banks before writing them to AR5K_RF_BUFFER - */ -static unsigned int ath5k_hw_rfregs_op(u32 *rf, u32 offset, u32 reg, u32 bits, - u32 first, u32 col, bool set) -{ - u32 mask, entry, last, data, shift, position; - s32 left; - int i; - - data = 0; - - if (rf == NULL) - /* should not happen */ - return 0; - - if (!(col <= 3 && bits <= 32 && first + bits <= 319)) { - ATH5K_PRINTF("invalid values at offset %u\n", offset); - return 0; - } - - entry = ((first - 1) / 8) + offset; - position = (first - 1) % 8; - - if (set) - data = ath5k_hw_bitswap(reg, bits); - - for (i = shift = 0, left = bits; left > 0; position = 0, entry++, i++) { - last = (position + left > 8) ? 8 : position + left; - mask = (((1 << last) - 1) ^ ((1 << position) - 1)) << (col * 8); - - if (set) { - rf[entry] &= ~mask; - rf[entry] |= ((data << position) << (col * 8)) & mask; - data >>= (8 - position); - } else { - data = (((rf[entry] & mask) >> (col * 8)) >> position) - << shift; - shift += last - position; - } - - left -= 8 - position; - } - - data = set ? 1 : ath5k_hw_bitswap(data, bits); - - return data; -} - -static u32 ath5k_hw_rfregs_gainf_corr(struct ath5k_hw *ah) -{ - u32 mix, step; - u32 *rf; - - if (ah->ah_rf_banks == NULL) - return 0; - - rf = ah->ah_rf_banks; - ah->ah_gain.g_f_corr = 0; - - if (ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 1, 36, 0, false) != 1) - return 0; - - step = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 4, 32, 0, false); - mix = ah->ah_gain.g_step->gos_param[0]; - - switch (mix) { - case 3: - ah->ah_gain.g_f_corr = step * 2; - break; - case 2: - ah->ah_gain.g_f_corr = (step - 5) * 2; - break; - case 1: - ah->ah_gain.g_f_corr = step; - break; - default: - ah->ah_gain.g_f_corr = 0; - break; - } - - return ah->ah_gain.g_f_corr; -} - -static bool ath5k_hw_rfregs_gain_readback(struct ath5k_hw *ah) -{ - u32 step, mix, level[4]; - u32 *rf; - - if (ah->ah_rf_banks == NULL) - return false; - - rf = ah->ah_rf_banks; - - if (ah->ah_radio == AR5K_RF5111) { - step = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 6, 37, 0, - false); - level[0] = 0; - level[1] = (step == 0x3f) ? 0x32 : step + 4; - level[2] = (step != 0x3f) ? 0x40 : level[0]; - level[3] = level[2] + 0x32; - - ah->ah_gain.g_high = level[3] - - (step == 0x3f ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5); - ah->ah_gain.g_low = level[0] + - (step == 0x3f ? AR5K_GAIN_DYN_ADJUST_LO_MARGIN : 0); - } else { - mix = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 1, 36, 0, - false); - level[0] = level[2] = 0; - - if (mix == 1) { - level[1] = level[3] = 83; - } else { - level[1] = level[3] = 107; - ah->ah_gain.g_high = 55; - } - } - - return (ah->ah_gain.g_current >= level[0] && - ah->ah_gain.g_current <= level[1]) || - (ah->ah_gain.g_current >= level[2] && - ah->ah_gain.g_current <= level[3]); -} - -static s32 ath5k_hw_rfregs_gain_adjust(struct ath5k_hw *ah) -{ - const struct ath5k_gain_opt *go; - int ret = 0; - - switch (ah->ah_radio) { - case AR5K_RF5111: - go = &rfgain_opt_5111; - break; - case AR5K_RF5112: - go = &rfgain_opt_5112; - break; - default: - return 0; - } - - ah->ah_gain.g_step = &go->go_step[ah->ah_gain.g_step_idx]; - - if (ah->ah_gain.g_current >= ah->ah_gain.g_high) { - if (ah->ah_gain.g_step_idx == 0) - return -1; - for (ah->ah_gain.g_target = ah->ah_gain.g_current; - ah->ah_gain.g_target >= ah->ah_gain.g_high && - ah->ah_gain.g_step_idx > 0; - ah->ah_gain.g_step = - &go->go_step[ah->ah_gain.g_step_idx]) - ah->ah_gain.g_target -= 2 * - (go->go_step[--(ah->ah_gain.g_step_idx)].gos_gain - - ah->ah_gain.g_step->gos_gain); - - ret = 1; - goto done; - } - - if (ah->ah_gain.g_current <= ah->ah_gain.g_low) { - if (ah->ah_gain.g_step_idx == (go->go_steps_count - 1)) - return -2; - for (ah->ah_gain.g_target = ah->ah_gain.g_current; - ah->ah_gain.g_target <= ah->ah_gain.g_low && - ah->ah_gain.g_step_idx < go->go_steps_count-1; - ah->ah_gain.g_step = - &go->go_step[ah->ah_gain.g_step_idx]) - ah->ah_gain.g_target -= 2 * - (go->go_step[++ah->ah_gain.g_step_idx].gos_gain - - ah->ah_gain.g_step->gos_gain); - - ret = 2; - goto done; - } - -done: - ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE, - "ret %d, gain step %u, current gain %u, target gain %u\n", - ret, ah->ah_gain.g_step_idx, ah->ah_gain.g_current, - ah->ah_gain.g_target); - - return ret; -} - -/* - * Read EEPROM Calibration data, modify RF Banks and Initialize RF5111 - */ -static int ath5k_hw_rf5111_rfregs(struct ath5k_hw *ah, - struct ieee80211_channel *channel, unsigned int mode) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 *rf; - const unsigned int rf_size = ARRAY_SIZE(rfregs_5111); - unsigned int i; - int obdb = -1, bank = -1; - u32 ee_mode; - - AR5K_ASSERT_ENTRY(mode, AR5K_MODE_MAX); - - rf = ah->ah_rf_banks; - - /* Copy values to modify them */ - for (i = 0; i < rf_size; i++) { - if (rfregs_5111[i].rf_bank >= AR5K_RF5111_INI_RF_MAX_BANKS) { - ATH5K_ERR(ah->ah_sc, "invalid bank\n"); - return -EINVAL; - } - - if (bank != rfregs_5111[i].rf_bank) { - bank = rfregs_5111[i].rf_bank; - ah->ah_offset[bank] = i; - } - - rf[i] = rfregs_5111[i].rf_value[mode]; - } - - /* Modify bank 0 */ - if (channel->hw_value & CHANNEL_2GHZ) { - if (channel->hw_value & CHANNEL_CCK) - ee_mode = AR5K_EEPROM_MODE_11B; - else - ee_mode = AR5K_EEPROM_MODE_11G; - obdb = 0; - - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[0], - ee->ee_ob[ee_mode][obdb], 3, 119, 0, true)) - return -EINVAL; - - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[0], - ee->ee_ob[ee_mode][obdb], 3, 122, 0, true)) - return -EINVAL; - - obdb = 1; - /* Modify bank 6 */ - } else { - /* For 11a, Turbo and XR */ - ee_mode = AR5K_EEPROM_MODE_11A; - obdb = channel->center_freq >= 5725 ? 3 : - (channel->center_freq >= 5500 ? 2 : - (channel->center_freq >= 5260 ? 1 : - (channel->center_freq > 4000 ? 0 : -1))); - - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_pwd_84, 1, 51, 3, true)) - return -EINVAL; - - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_pwd_90, 1, 45, 3, true)) - return -EINVAL; - } - - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - !ee->ee_xpd[ee_mode], 1, 95, 0, true)) - return -EINVAL; - - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_x_gain[ee_mode], 4, 96, 0, true)) - return -EINVAL; - - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], obdb >= 0 ? - ee->ee_ob[ee_mode][obdb] : 0, 3, 104, 0, true)) - return -EINVAL; - - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], obdb >= 0 ? - ee->ee_db[ee_mode][obdb] : 0, 3, 107, 0, true)) - return -EINVAL; - - /* Modify bank 7 */ - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[7], - ee->ee_i_gain[ee_mode], 6, 29, 0, true)) - return -EINVAL; - - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[7], - ee->ee_xpd[ee_mode], 1, 4, 0, true)) - return -EINVAL; - - /* Write RF values */ - for (i = 0; i < rf_size; i++) { - AR5K_REG_WAIT(i); - ath5k_hw_reg_write(ah, rf[i], rfregs_5111[i].rf_register); - } - - return 0; -} - -/* - * Read EEPROM Calibration data, modify RF Banks and Initialize RF5112 - */ -static int ath5k_hw_rf5112_rfregs(struct ath5k_hw *ah, - struct ieee80211_channel *channel, unsigned int mode) -{ - const struct ath5k_ini_rf *rf_ini; - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 *rf; - unsigned int rf_size, i; - int obdb = -1, bank = -1; - u32 ee_mode; - - AR5K_ASSERT_ENTRY(mode, AR5K_MODE_MAX); - - rf = ah->ah_rf_banks; - - if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_2112A - && !test_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode)) { - rf_ini = rfregs_2112a; - rf_size = ARRAY_SIZE(rfregs_5112a); - if (mode < 2) { - ATH5K_ERR(ah->ah_sc, "invalid channel mode: %i\n", - mode); - return -EINVAL; - } - mode = mode - 2; /*no a/turboa modes for 2112*/ - } else if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) { - rf_ini = rfregs_5112a; - rf_size = ARRAY_SIZE(rfregs_5112a); - } else { - rf_ini = rfregs_5112; - rf_size = ARRAY_SIZE(rfregs_5112); - } - - /* Copy values to modify them */ - for (i = 0; i < rf_size; i++) { - if (rf_ini[i].rf_bank >= AR5K_RF5112_INI_RF_MAX_BANKS) { - ATH5K_ERR(ah->ah_sc, "invalid bank\n"); - return -EINVAL; - } - - if (bank != rf_ini[i].rf_bank) { - bank = rf_ini[i].rf_bank; - ah->ah_offset[bank] = i; - } - - rf[i] = rf_ini[i].rf_value[mode]; - } - - /* Modify bank 6 */ - if (channel->hw_value & CHANNEL_2GHZ) { - if (channel->hw_value & CHANNEL_OFDM) - ee_mode = AR5K_EEPROM_MODE_11G; - else - ee_mode = AR5K_EEPROM_MODE_11B; - obdb = 0; - - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_ob[ee_mode][obdb], 3, 287, 0, true)) - return -EINVAL; - - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_ob[ee_mode][obdb], 3, 290, 0, true)) - return -EINVAL; - } else { - /* For 11a, Turbo and XR */ - ee_mode = AR5K_EEPROM_MODE_11A; - obdb = channel->center_freq >= 5725 ? 3 : - (channel->center_freq >= 5500 ? 2 : - (channel->center_freq >= 5260 ? 1 : - (channel->center_freq > 4000 ? 0 : -1))); - - if (obdb == -1) - return -EINVAL; - - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_ob[ee_mode][obdb], 3, 279, 0, true)) - return -EINVAL; - - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_ob[ee_mode][obdb], 3, 282, 0, true)) - return -EINVAL; - } - - ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_x_gain[ee_mode], 2, 270, 0, true); - ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_x_gain[ee_mode], 2, 257, 0, true); - - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_xpd[ee_mode], 1, 302, 0, true)) - return -EINVAL; - - /* Modify bank 7 */ - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[7], - ee->ee_i_gain[ee_mode], 6, 14, 0, true)) - return -EINVAL; - - /* Write RF values */ - for (i = 0; i < rf_size; i++) - ath5k_hw_reg_write(ah, rf[i], rf_ini[i].rf_register); - - return 0; -} - -/* - * Initialize RF5413/5414 and future chips - * (until we come up with a better solution) - */ -static int ath5k_hw_rf5413_rfregs(struct ath5k_hw *ah, - struct ieee80211_channel *channel, unsigned int mode) -{ - const struct ath5k_ini_rf *rf_ini; - u32 *rf; - unsigned int rf_size, i; - int bank = -1; - - AR5K_ASSERT_ENTRY(mode, AR5K_MODE_MAX); - - rf = ah->ah_rf_banks; - - switch (ah->ah_radio) { - case AR5K_RF5413: - rf_ini = rfregs_5413; - rf_size = ARRAY_SIZE(rfregs_5413); - break; - case AR5K_RF2413: - rf_ini = rfregs_2413; - rf_size = ARRAY_SIZE(rfregs_2413); - - if (mode < 2) { - ATH5K_ERR(ah->ah_sc, - "invalid channel mode: %i\n", mode); - return -EINVAL; - } - - mode = mode - 2; - break; - case AR5K_RF2425: - rf_ini = rfregs_2425; - rf_size = ARRAY_SIZE(rfregs_2425); - - if (mode < 2) { - ATH5K_ERR(ah->ah_sc, - "invalid channel mode: %i\n", mode); - return -EINVAL; - } - - /* Map b to g */ - if (mode == 2) - mode = 0; - else - mode = mode - 3; - - break; - default: - return -EINVAL; - } - - /* Copy values to modify them */ - for (i = 0; i < rf_size; i++) { - if (rf_ini[i].rf_bank >= AR5K_RF5112_INI_RF_MAX_BANKS) { - ATH5K_ERR(ah->ah_sc, "invalid bank\n"); - return -EINVAL; - } - - if (bank != rf_ini[i].rf_bank) { - bank = rf_ini[i].rf_bank; - ah->ah_offset[bank] = i; - } - - rf[i] = rf_ini[i].rf_value[mode]; - } - - /* - * After compairing dumps from different cards - * we get the same RF_BUFFER settings (diff returns - * 0 lines). It seems that RF_BUFFER settings are static - * and are written unmodified (no EEPROM stuff - * is used because calibration data would be - * different between different cards and would result - * different RF_BUFFER settings) - */ - - /* Write RF values */ - for (i = 0; i < rf_size; i++) - ath5k_hw_reg_write(ah, rf[i], rf_ini[i].rf_register); - - return 0; -} - -/* - * Initialize RF - */ -int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, - unsigned int mode) -{ - int (*func)(struct ath5k_hw *, struct ieee80211_channel *, unsigned int); - int ret; - - switch (ah->ah_radio) { - case AR5K_RF5111: - ah->ah_rf_banks_size = sizeof(rfregs_5111); - func = ath5k_hw_rf5111_rfregs; - break; - case AR5K_RF5112: - if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) - ah->ah_rf_banks_size = sizeof(rfregs_5112a); - else - ah->ah_rf_banks_size = sizeof(rfregs_5112); - func = ath5k_hw_rf5112_rfregs; - break; - case AR5K_RF5413: - ah->ah_rf_banks_size = sizeof(rfregs_5413); - func = ath5k_hw_rf5413_rfregs; - break; - case AR5K_RF2413: - ah->ah_rf_banks_size = sizeof(rfregs_2413); - func = ath5k_hw_rf5413_rfregs; - break; - case AR5K_RF2425: - ah->ah_rf_banks_size = sizeof(rfregs_2425); - func = ath5k_hw_rf5413_rfregs; - break; - default: - return -EINVAL; - } - - if (ah->ah_rf_banks == NULL) { - /* XXX do extra checks? */ - ah->ah_rf_banks = kmalloc(ah->ah_rf_banks_size, GFP_KERNEL); - if (ah->ah_rf_banks == NULL) { - ATH5K_ERR(ah->ah_sc, "out of memory\n"); - return -ENOMEM; - } - } - - ret = func(ah, channel, mode); - if (!ret) - ah->ah_rf_gain = AR5K_RFGAIN_INACTIVE; - - return ret; -} - -int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq) -{ - const struct ath5k_ini_rfgain *ath5k_rfg; - unsigned int i, size; - - switch (ah->ah_radio) { - case AR5K_RF5111: - ath5k_rfg = rfgain_5111; - size = ARRAY_SIZE(rfgain_5111); - break; - case AR5K_RF5112: - ath5k_rfg = rfgain_5112; - size = ARRAY_SIZE(rfgain_5112); - break; - case AR5K_RF5413: - ath5k_rfg = rfgain_5413; - size = ARRAY_SIZE(rfgain_5413); - break; - case AR5K_RF2413: - ath5k_rfg = rfgain_2413; - size = ARRAY_SIZE(rfgain_2413); - freq = 0; /* only 2Ghz */ - break; - case AR5K_RF2425: - ath5k_rfg = rfgain_2425; - size = ARRAY_SIZE(rfgain_2425); - freq = 0; /* only 2Ghz */ - break; - default: - return -EINVAL; - } - - switch (freq) { - case AR5K_INI_RFGAIN_2GHZ: - case AR5K_INI_RFGAIN_5GHZ: - break; - default: - return -EINVAL; - } - - for (i = 0; i < size; i++) { - AR5K_REG_WAIT(i); - ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[freq], - (u32)ath5k_rfg[i].rfg_register); - } - - return 0; -} - -enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah) -{ - u32 data, type; - - ATH5K_TRACE(ah->ah_sc); - - if (ah->ah_rf_banks == NULL || !ah->ah_gain.g_active || - ah->ah_version <= AR5K_AR5211) - return AR5K_RFGAIN_INACTIVE; - - if (ah->ah_rf_gain != AR5K_RFGAIN_READ_REQUESTED) - goto done; - - data = ath5k_hw_reg_read(ah, AR5K_PHY_PAPD_PROBE); - - if (!(data & AR5K_PHY_PAPD_PROBE_TX_NEXT)) { - ah->ah_gain.g_current = data >> AR5K_PHY_PAPD_PROBE_GAINF_S; - type = AR5K_REG_MS(data, AR5K_PHY_PAPD_PROBE_TYPE); - - if (type == AR5K_PHY_PAPD_PROBE_TYPE_CCK) - ah->ah_gain.g_current += AR5K_GAIN_CCK_PROBE_CORR; - - if (ah->ah_radio >= AR5K_RF5112) { - ath5k_hw_rfregs_gainf_corr(ah); - ah->ah_gain.g_current = - ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ? - (ah->ah_gain.g_current-ah->ah_gain.g_f_corr) : - 0; - } - - if (ath5k_hw_rfregs_gain_readback(ah) && - AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) && - ath5k_hw_rfregs_gain_adjust(ah)) - ah->ah_rf_gain = AR5K_RFGAIN_NEED_CHANGE; - } - -done: - return ah->ah_rf_gain; -} - -int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah) -{ - /* Initialize the gain optimization values */ - switch (ah->ah_radio) { - case AR5K_RF5111: - ah->ah_gain.g_step_idx = rfgain_opt_5111.go_default; - ah->ah_gain.g_step = - &rfgain_opt_5111.go_step[ah->ah_gain.g_step_idx]; - ah->ah_gain.g_low = 20; - ah->ah_gain.g_high = 35; - ah->ah_gain.g_active = 1; - break; - case AR5K_RF5112: - ah->ah_gain.g_step_idx = rfgain_opt_5112.go_default; - ah->ah_gain.g_step = - &rfgain_opt_5112.go_step[ah->ah_gain.g_step_idx]; - ah->ah_gain.g_low = 20; - ah->ah_gain.g_high = 85; - ah->ah_gain.g_active = 1; - break; - default: - return -EINVAL; - } - - return 0; -} - -/**************************\ - PHY/RF channel functions -\**************************/ - -/* - * Check if a channel is supported - */ -bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags) -{ - /* Check if the channel is in our supported range */ - if (flags & CHANNEL_2GHZ) { - if ((freq >= ah->ah_capabilities.cap_range.range_2ghz_min) && - (freq <= ah->ah_capabilities.cap_range.range_2ghz_max)) - return true; - } else if (flags & CHANNEL_5GHZ) - if ((freq >= ah->ah_capabilities.cap_range.range_5ghz_min) && - (freq <= ah->ah_capabilities.cap_range.range_5ghz_max)) - return true; - - return false; -} - -/* - * Convertion needed for RF5110 - */ -static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel) -{ - u32 athchan; - - /* - * Convert IEEE channel/MHz to an internal channel value used - * by the AR5210 chipset. This has not been verified with - * newer chipsets like the AR5212A who have a completely - * different RF/PHY part. - */ - athchan = (ath5k_hw_bitswap( - (ieee80211_frequency_to_channel( - channel->center_freq) - 24) / 2, 5) - << 1) | (1 << 6) | 0x1; - return athchan; -} - -/* - * Set channel on RF5110 - */ -static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah, - struct ieee80211_channel *channel) -{ - u32 data; - - /* - * Set the channel and wait - */ - data = ath5k_hw_rf5110_chan2athchan(channel); - ath5k_hw_reg_write(ah, data, AR5K_RF_BUFFER); - ath5k_hw_reg_write(ah, 0, AR5K_RF_BUFFER_CONTROL_0); - mdelay(1); - - return 0; -} - -/* - * Convertion needed for 5111 - */ -static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee, - struct ath5k_athchan_2ghz *athchan) -{ - int channel; - - /* Cast this value to catch negative channel numbers (>= -19) */ - channel = (int)ieee; - - /* - * Map 2GHz IEEE channel to 5GHz Atheros channel - */ - if (channel <= 13) { - athchan->a2_athchan = 115 + channel; - athchan->a2_flags = 0x46; - } else if (channel == 14) { - athchan->a2_athchan = 124; - athchan->a2_flags = 0x44; - } else if (channel >= 15 && channel <= 26) { - athchan->a2_athchan = ((channel - 14) * 4) + 132; - athchan->a2_flags = 0x46; - } else - return -EINVAL; - - return 0; -} - -/* - * Set channel on 5111 - */ -static int ath5k_hw_rf5111_channel(struct ath5k_hw *ah, - struct ieee80211_channel *channel) -{ - struct ath5k_athchan_2ghz ath5k_channel_2ghz; - unsigned int ath5k_channel = - ieee80211_frequency_to_channel(channel->center_freq); - u32 data0, data1, clock; - int ret; - - /* - * Set the channel on the RF5111 radio - */ - data0 = data1 = 0; - - if (channel->hw_value & CHANNEL_2GHZ) { - /* Map 2GHz channel to 5GHz Atheros channel ID */ - ret = ath5k_hw_rf5111_chan2athchan( - ieee80211_frequency_to_channel(channel->center_freq), - &ath5k_channel_2ghz); - if (ret) - return ret; - - ath5k_channel = ath5k_channel_2ghz.a2_athchan; - data0 = ((ath5k_hw_bitswap(ath5k_channel_2ghz.a2_flags, 8) & 0xff) - << 5) | (1 << 4); - } - - if (ath5k_channel < 145 || !(ath5k_channel & 1)) { - clock = 1; - data1 = ((ath5k_hw_bitswap(ath5k_channel - 24, 8) & 0xff) << 2) | - (clock << 1) | (1 << 10) | 1; - } else { - clock = 0; - data1 = ((ath5k_hw_bitswap((ath5k_channel - 24) / 2, 8) & 0xff) - << 2) | (clock << 1) | (1 << 10) | 1; - } - - ath5k_hw_reg_write(ah, (data1 & 0xff) | ((data0 & 0xff) << 8), - AR5K_RF_BUFFER); - ath5k_hw_reg_write(ah, ((data1 >> 8) & 0xff) | (data0 & 0xff00), - AR5K_RF_BUFFER_CONTROL_3); - - return 0; -} - -/* - * Set channel on 5112 and newer - */ -static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, - struct ieee80211_channel *channel) -{ - u32 data, data0, data1, data2; - u16 c; - - data = data0 = data1 = data2 = 0; - c = channel->center_freq; - - if (c < 4800) { - if (!((c - 2224) % 5)) { - data0 = ((2 * (c - 704)) - 3040) / 10; - data1 = 1; - } else if (!((c - 2192) % 5)) { - data0 = ((2 * (c - 672)) - 3040) / 10; - data1 = 0; - } else - return -EINVAL; - - data0 = ath5k_hw_bitswap((data0 << 2) & 0xff, 8); - } else if ((c - (c % 5)) != 2 || c > 5435) { - if (!(c % 20) && c >= 5120) { - data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8); - data2 = ath5k_hw_bitswap(3, 2); - } else if (!(c % 10)) { - data0 = ath5k_hw_bitswap(((c - 4800) / 10 << 1), 8); - data2 = ath5k_hw_bitswap(2, 2); - } else if (!(c % 5)) { - data0 = ath5k_hw_bitswap((c - 4800) / 5, 8); - data2 = ath5k_hw_bitswap(1, 2); - } else - return -EINVAL; - } else { - data0 = ath5k_hw_bitswap((10 * (c - 2) - 4800) / 25 + 1, 8); - data2 = ath5k_hw_bitswap(0, 2); - } - - data = (data0 << 4) | (data1 << 1) | (data2 << 2) | 0x1001; - - ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER); - ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5); - - return 0; -} - -/* - * Set the channel on the RF2425 - */ -static int ath5k_hw_rf2425_channel(struct ath5k_hw *ah, - struct ieee80211_channel *channel) -{ - u32 data, data0, data2; - u16 c; - - data = data0 = data2 = 0; - c = channel->center_freq; - - if (c < 4800) { - data0 = ath5k_hw_bitswap((c - 2272), 8); - data2 = 0; - /* ? 5GHz ? */ - } else if ((c - (c % 5)) != 2 || c > 5435) { - if (!(c % 20) && c < 5120) - data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8); - else if (!(c % 10)) - data0 = ath5k_hw_bitswap(((c - 4800) / 10 << 1), 8); - else if (!(c % 5)) - data0 = ath5k_hw_bitswap((c - 4800) / 5, 8); - else - return -EINVAL; - data2 = ath5k_hw_bitswap(1, 2); - } else { - data0 = ath5k_hw_bitswap((10 * (c - 2) - 4800) / 25 + 1, 8); - data2 = ath5k_hw_bitswap(0, 2); - } - - data = (data0 << 4) | data2 << 2 | 0x1001; - - ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER); - ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5); - - return 0; -} - -/* - * Set a channel on the radio chip - */ -int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) -{ - int ret; - /* - * Check bounds supported by the PHY (we don't care about regultory - * restrictions at this point). Note: hw_value already has the band - * (CHANNEL_2GHZ, or CHANNEL_5GHZ) so we inform ath5k_channel_ok() - * of the band by that */ - if (!ath5k_channel_ok(ah, channel->center_freq, channel->hw_value)) { - ATH5K_ERR(ah->ah_sc, - "channel frequency (%u MHz) out of supported " - "band range\n", - channel->center_freq); - return -EINVAL; - } - - /* - * Set the channel and wait - */ - switch (ah->ah_radio) { - case AR5K_RF5110: - ret = ath5k_hw_rf5110_channel(ah, channel); - break; - case AR5K_RF5111: - ret = ath5k_hw_rf5111_channel(ah, channel); - break; - case AR5K_RF2425: - ret = ath5k_hw_rf2425_channel(ah, channel); - break; - default: - ret = ath5k_hw_rf5112_channel(ah, channel); - break; - } - - if (ret) - return ret; - - /* Set JAPAN setting for channel 14 */ - if (channel->center_freq == 2484) { - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL, - AR5K_PHY_CCKTXCTL_JAPAN); - } else { - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL, - AR5K_PHY_CCKTXCTL_WORLD); - } - - ah->ah_current_channel.center_freq = channel->center_freq; - ah->ah_current_channel.hw_value = channel->hw_value; - ah->ah_turbo = channel->hw_value == CHANNEL_T ? true : false; - - return 0; -} - -/*****************\ - PHY calibration -\*****************/ - -/** - * ath5k_hw_noise_floor_calibration - perform PHY noise floor calibration - * - * @ah: struct ath5k_hw pointer we are operating on - * @freq: the channel frequency, just used for error logging - * - * This function performs a noise floor calibration of the PHY and waits for - * it to complete. Then the noise floor value is compared to some maximum - * noise floor we consider valid. - * - * Note that this is different from what the madwifi HAL does: it reads the - * noise floor and afterwards initiates the calibration. Since the noise floor - * calibration can take some time to finish, depending on the current channel - * use, that avoids the occasional timeout warnings we are seeing now. - * - * See the following link for an Atheros patent on noise floor calibration: - * http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL \ - * &p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=7245893.PN.&OS=PN/7 - * - * XXX: Since during noise floor calibration antennas are detached according to - * the patent, we should stop tx queues here. - */ -int -ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq) -{ - int ret; - unsigned int i; - s32 noise_floor; - - /* - * Enable noise floor calibration - */ - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, - AR5K_PHY_AGCCTL_NF); - - ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, - AR5K_PHY_AGCCTL_NF, 0, false); - if (ret) { - ATH5K_ERR(ah->ah_sc, - "noise floor calibration timeout (%uMHz)\n", freq); - return -EAGAIN; - } - - /* Wait until the noise floor is calibrated and read the value */ - for (i = 20; i > 0; i--) { - mdelay(1); - noise_floor = ath5k_hw_reg_read(ah, AR5K_PHY_NF); - noise_floor = AR5K_PHY_NF_RVAL(noise_floor); - if (noise_floor & AR5K_PHY_NF_ACTIVE) { - noise_floor = AR5K_PHY_NF_AVAL(noise_floor); - - if (noise_floor <= AR5K_TUNE_NOISE_FLOOR) - break; - } - } - - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_CALIBRATE, - "noise floor %d\n", noise_floor); - - if (noise_floor > AR5K_TUNE_NOISE_FLOOR) { - ATH5K_ERR(ah->ah_sc, - "noise floor calibration failed (%uMHz)\n", freq); - return -EAGAIN; - } - - ah->ah_noise_floor = noise_floor; - - return 0; -} - -/* - * Perform a PHY calibration on RF5110 - * -Fix BPSK/QAM Constellation (I/Q correction) - * -Calculate Noise Floor - */ -static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, - struct ieee80211_channel *channel) -{ - u32 phy_sig, phy_agc, phy_sat, beacon; - int ret; - - /* - * Disable beacons and RX/TX queues, wait - */ - AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5210, - AR5K_DIAG_SW_DIS_TX | AR5K_DIAG_SW_DIS_RX_5210); - beacon = ath5k_hw_reg_read(ah, AR5K_BEACON_5210); - ath5k_hw_reg_write(ah, beacon & ~AR5K_BEACON_ENABLE, AR5K_BEACON_5210); - - mdelay(2); - - /* - * Set the channel (with AGC turned off) - */ - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); - udelay(10); - ret = ath5k_hw_channel(ah, channel); - - /* - * Activate PHY and wait - */ - ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); - mdelay(1); - - AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); - - if (ret) - return ret; - - /* - * Calibrate the radio chip - */ - - /* Remember normal state */ - phy_sig = ath5k_hw_reg_read(ah, AR5K_PHY_SIG); - phy_agc = ath5k_hw_reg_read(ah, AR5K_PHY_AGCCOARSE); - phy_sat = ath5k_hw_reg_read(ah, AR5K_PHY_ADCSAT); - - /* Update radio registers */ - ath5k_hw_reg_write(ah, (phy_sig & ~(AR5K_PHY_SIG_FIRPWR)) | - AR5K_REG_SM(-1, AR5K_PHY_SIG_FIRPWR), AR5K_PHY_SIG); - - ath5k_hw_reg_write(ah, (phy_agc & ~(AR5K_PHY_AGCCOARSE_HI | - AR5K_PHY_AGCCOARSE_LO)) | - AR5K_REG_SM(-1, AR5K_PHY_AGCCOARSE_HI) | - AR5K_REG_SM(-127, AR5K_PHY_AGCCOARSE_LO), AR5K_PHY_AGCCOARSE); - - ath5k_hw_reg_write(ah, (phy_sat & ~(AR5K_PHY_ADCSAT_ICNT | - AR5K_PHY_ADCSAT_THR)) | - AR5K_REG_SM(2, AR5K_PHY_ADCSAT_ICNT) | - AR5K_REG_SM(12, AR5K_PHY_ADCSAT_THR), AR5K_PHY_ADCSAT); - - udelay(20); - - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); - udelay(10); - ath5k_hw_reg_write(ah, AR5K_PHY_RFSTG_DISABLE, AR5K_PHY_RFSTG); - AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); - - mdelay(1); - - /* - * Enable calibration and wait until completion - */ - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_CAL); - - ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, - AR5K_PHY_AGCCTL_CAL, 0, false); - - /* Reset to normal state */ - ath5k_hw_reg_write(ah, phy_sig, AR5K_PHY_SIG); - ath5k_hw_reg_write(ah, phy_agc, AR5K_PHY_AGCCOARSE); - ath5k_hw_reg_write(ah, phy_sat, AR5K_PHY_ADCSAT); - - if (ret) { - ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n", - channel->center_freq); - return ret; - } - - ath5k_hw_noise_floor_calibration(ah, channel->center_freq); - - /* - * Re-enable RX/TX and beacons - */ - AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5210, - AR5K_DIAG_SW_DIS_TX | AR5K_DIAG_SW_DIS_RX_5210); - ath5k_hw_reg_write(ah, beacon, AR5K_BEACON_5210); - - return 0; -} - -/* - * Perform a PHY calibration on RF5111/5112 and newer chips - */ -static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah, - struct ieee80211_channel *channel) -{ - u32 i_pwr, q_pwr; - s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd; - int i; - ATH5K_TRACE(ah->ah_sc); - - if (!ah->ah_calibration || - ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN) - goto done; - - /* Calibration has finished, get the results and re-run */ - for (i = 0; i <= 10; i++) { - iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR); - i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I); - q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q); - } - - i_coffd = ((i_pwr >> 1) + (q_pwr >> 1)) >> 7; - q_coffd = q_pwr >> 7; - - /* No correction */ - if (i_coffd == 0 || q_coffd == 0) - goto done; - - i_coff = ((-iq_corr) / i_coffd) & 0x3f; - - /* Boundary check */ - if (i_coff > 31) - i_coff = 31; - if (i_coff < -32) - i_coff = -32; - - q_coff = (((s32)i_pwr / q_coffd) - 128) & 0x1f; - - /* Boundary check */ - if (q_coff > 15) - q_coff = 15; - if (q_coff < -16) - q_coff = -16; - - /* Commit new I/Q value */ - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE | - ((u32)q_coff) | ((u32)i_coff << AR5K_PHY_IQ_CORR_Q_I_COFF_S)); - - /* Re-enable calibration -if we don't we'll commit - * the same values again and again */ - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_RUN); - -done: - - /* TODO: Separate noise floor calibration from I/Q calibration - * since noise floor calibration interrupts rx path while I/Q - * calibration doesn't. We don't need to run noise floor calibration - * as often as I/Q calibration.*/ - ath5k_hw_noise_floor_calibration(ah, channel->center_freq); - - /* Request RF gain */ - if (channel->hw_value & CHANNEL_5GHZ) { - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max, - AR5K_PHY_PAPD_PROBE_TXPOWER) | - AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE); - ah->ah_rf_gain = AR5K_RFGAIN_READ_REQUESTED; - } - - return 0; -} - -/* - * Perform a PHY calibration - */ -int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, - struct ieee80211_channel *channel) -{ - int ret; - - if (ah->ah_radio == AR5K_RF5110) - ret = ath5k_hw_rf5110_calibrate(ah, channel); - else - ret = ath5k_hw_rf511x_calibrate(ah, channel); - - return ret; -} - -int ath5k_hw_phy_disable(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - /*Just a try M.F.*/ - ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); - - return 0; -} - -/********************\ - Misc PHY functions -\********************/ - -/* - * Get the PHY Chip revision - */ -u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan) -{ - unsigned int i; - u32 srev; - u16 ret; - - ATH5K_TRACE(ah->ah_sc); - - /* - * Set the radio chip access register - */ - switch (chan) { - case CHANNEL_2GHZ: - ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_2GHZ, AR5K_PHY(0)); - break; - case CHANNEL_5GHZ: - ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); - break; - default: - return 0; - } - - mdelay(2); - - /* ...wait until PHY is ready and read the selected radio revision */ - ath5k_hw_reg_write(ah, 0x00001c16, AR5K_PHY(0x34)); - - for (i = 0; i < 8; i++) - ath5k_hw_reg_write(ah, 0x00010000, AR5K_PHY(0x20)); - - if (ah->ah_version == AR5K_AR5210) { - srev = ath5k_hw_reg_read(ah, AR5K_PHY(256) >> 28) & 0xf; - ret = (u16)ath5k_hw_bitswap(srev, 4) + 1; - } else { - srev = (ath5k_hw_reg_read(ah, AR5K_PHY(0x100)) >> 24) & 0xff; - ret = (u16)ath5k_hw_bitswap(((srev & 0xf0) >> 4) | - ((srev & 0x0f) << 4), 8); - } - - /* Reset to the 5GHz mode */ - ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); - - return ret; -} - -void /*TODO:Boundary check*/ -ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant) -{ - ATH5K_TRACE(ah->ah_sc); - /*Just a try M.F.*/ - if (ah->ah_version != AR5K_AR5210) - ath5k_hw_reg_write(ah, ant, AR5K_DEFAULT_ANTENNA); -} - -unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - /*Just a try M.F.*/ - if (ah->ah_version != AR5K_AR5210) - return ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA); - - return false; /*XXX: What do we return for 5210 ?*/ -} - -/* - * TX power setup - */ - -/* - * Initialize the tx power table (not fully implemented) - */ -static void ath5k_txpower_table(struct ath5k_hw *ah, - struct ieee80211_channel *channel, s16 max_power) -{ - unsigned int i, min, max, n; - u16 txpower, *rates; - - rates = ah->ah_txpower.txp_rates; - - txpower = AR5K_TUNE_DEFAULT_TXPOWER * 2; - if (max_power > txpower) - txpower = max_power > AR5K_TUNE_MAX_TXPOWER ? - AR5K_TUNE_MAX_TXPOWER : max_power; - - for (i = 0; i < AR5K_MAX_RATES; i++) - rates[i] = txpower; - - /* XXX setup target powers by rate */ - - ah->ah_txpower.txp_min = rates[7]; - ah->ah_txpower.txp_max = rates[0]; - ah->ah_txpower.txp_ofdm = rates[0]; - - /* Calculate the power table */ - n = ARRAY_SIZE(ah->ah_txpower.txp_pcdac); - min = AR5K_EEPROM_PCDAC_START; - max = AR5K_EEPROM_PCDAC_STOP; - for (i = 0; i < n; i += AR5K_EEPROM_PCDAC_STEP) - ah->ah_txpower.txp_pcdac[i] = -#ifdef notyet - min + ((i * (max - min)) / n); -#else - min; -#endif -} - -/* - * Set transmition power - */ -int /*O.K. - txpower_table is unimplemented so this doesn't work*/ -ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, - unsigned int txpower) -{ - bool tpc = ah->ah_txpower.txp_tpc; - unsigned int i; - - ATH5K_TRACE(ah->ah_sc); - if (txpower > AR5K_TUNE_MAX_TXPOWER) { - ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower); - return -EINVAL; - } - - /* - * RF2413 for some reason can't - * transmit anything if we call - * this funtion, so we skip it - * until we fix txpower. - * - * XXX: Assume same for RF2425 - * to be safe. - */ - if ((ah->ah_radio == AR5K_RF2413) || (ah->ah_radio == AR5K_RF2425)) - return 0; - - /* Reset TX power values */ - memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); - ah->ah_txpower.txp_tpc = tpc; - - /* Initialize TX power table */ - ath5k_txpower_table(ah, channel, txpower); - - /* - * Write TX power values - */ - for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) { - ath5k_hw_reg_write(ah, - ((((ah->ah_txpower.txp_pcdac[(i << 1) + 1] << 8) | 0xff) & 0xffff) << 16) | - (((ah->ah_txpower.txp_pcdac[(i << 1) ] << 8) | 0xff) & 0xffff), - AR5K_PHY_PCDAC_TXPOWER(i)); - } - - ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(3, 24) | - AR5K_TXPOWER_OFDM(2, 16) | AR5K_TXPOWER_OFDM(1, 8) | - AR5K_TXPOWER_OFDM(0, 0), AR5K_PHY_TXPOWER_RATE1); - - ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(7, 24) | - AR5K_TXPOWER_OFDM(6, 16) | AR5K_TXPOWER_OFDM(5, 8) | - AR5K_TXPOWER_OFDM(4, 0), AR5K_PHY_TXPOWER_RATE2); - - ath5k_hw_reg_write(ah, AR5K_TXPOWER_CCK(10, 24) | - AR5K_TXPOWER_CCK(9, 16) | AR5K_TXPOWER_CCK(15, 8) | - AR5K_TXPOWER_CCK(8, 0), AR5K_PHY_TXPOWER_RATE3); - - ath5k_hw_reg_write(ah, AR5K_TXPOWER_CCK(14, 24) | - AR5K_TXPOWER_CCK(13, 16) | AR5K_TXPOWER_CCK(12, 8) | - AR5K_TXPOWER_CCK(11, 0), AR5K_PHY_TXPOWER_RATE4); - - if (ah->ah_txpower.txp_tpc) - ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE | - AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX); - else - ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX | - AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX); - - return 0; -} - -int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power) -{ - /*Just a try M.F.*/ - struct ieee80211_channel *channel = &ah->ah_current_channel; - - ATH5K_TRACE(ah->ah_sc); - ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER, - "changing txpower to %d\n", power); - - return ath5k_hw_txpower(ah, channel, power); -} - -#undef _ATH5K_PHY diff --git a/drivers/net/wireless/ath5k/qcu.c b/drivers/net/wireless/ath5k/qcu.c deleted file mode 100644 index 1b7bc50ea8e..00000000000 --- a/drivers/net/wireless/ath5k/qcu.c +++ /dev/null @@ -1,521 +0,0 @@ -/* - * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -/********************************************\ -Queue Control Unit, DFS Control Unit Functions -\********************************************/ - -#include "ath5k.h" -#include "reg.h" -#include "debug.h" -#include "base.h" - -/* - * Get properties for a transmit queue - */ -int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, - struct ath5k_txq_info *queue_info) -{ - ATH5K_TRACE(ah->ah_sc); - memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info)); - return 0; -} - -/* - * Set properties for a transmit queue - */ -int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, - const struct ath5k_txq_info *queue_info) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return -EIO; - - memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info)); - - /*XXX: Is this supported on 5210 ?*/ - if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA && - ((queue_info->tqi_subtype == AR5K_WME_AC_VI) || - (queue_info->tqi_subtype == AR5K_WME_AC_VO))) || - queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD) - ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS; - - return 0; -} - -/* - * Initialize a transmit queue - */ -int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, - struct ath5k_txq_info *queue_info) -{ - unsigned int queue; - int ret; - - ATH5K_TRACE(ah->ah_sc); - - /* - * Get queue by type - */ - /*5210 only has 2 queues*/ - if (ah->ah_version == AR5K_AR5210) { - switch (queue_type) { - case AR5K_TX_QUEUE_DATA: - queue = AR5K_TX_QUEUE_ID_NOQCU_DATA; - break; - case AR5K_TX_QUEUE_BEACON: - case AR5K_TX_QUEUE_CAB: - queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON; - break; - default: - return -EINVAL; - } - } else { - switch (queue_type) { - case AR5K_TX_QUEUE_DATA: - for (queue = AR5K_TX_QUEUE_ID_DATA_MIN; - ah->ah_txq[queue].tqi_type != - AR5K_TX_QUEUE_INACTIVE; queue++) { - - if (queue > AR5K_TX_QUEUE_ID_DATA_MAX) - return -EINVAL; - } - break; - case AR5K_TX_QUEUE_UAPSD: - queue = AR5K_TX_QUEUE_ID_UAPSD; - break; - case AR5K_TX_QUEUE_BEACON: - queue = AR5K_TX_QUEUE_ID_BEACON; - break; - case AR5K_TX_QUEUE_CAB: - queue = AR5K_TX_QUEUE_ID_CAB; - break; - case AR5K_TX_QUEUE_XR_DATA: - if (ah->ah_version != AR5K_AR5212) - ATH5K_ERR(ah->ah_sc, - "XR data queues only supported in" - " 5212!\n"); - queue = AR5K_TX_QUEUE_ID_XR_DATA; - break; - default: - return -EINVAL; - } - } - - /* - * Setup internal queue structure - */ - memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info)); - ah->ah_txq[queue].tqi_type = queue_type; - - if (queue_info != NULL) { - queue_info->tqi_type = queue_type; - ret = ath5k_hw_set_tx_queueprops(ah, queue, queue_info); - if (ret) - return ret; - } - - /* - * We use ah_txq_status to hold a temp value for - * the Secondary interrupt mask registers on 5211+ - * check out ath5k_hw_reset_tx_queue - */ - AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue); - - return queue; -} - -/* - * Get number of pending frames - * for a specific queue [5211+] - */ -u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* Return if queue is declared inactive */ - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return false; - - /* XXX: How about AR5K_CFG_TXCNT ? */ - if (ah->ah_version == AR5K_AR5210) - return false; - - return AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT; -} - -/* - * Set a transmit queue inactive - */ -void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) -{ - ATH5K_TRACE(ah->ah_sc); - if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num)) - return; - - /* This queue will be skipped in further operations */ - ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE; - /*For SIMR setup*/ - AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue); -} - -/* - * Set DFS properties for a transmit queue on DCU - */ -int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) -{ - u32 cw_min, cw_max, retry_lg, retry_sh; - struct ath5k_txq_info *tq = &ah->ah_txq[queue]; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - tq = &ah->ah_txq[queue]; - - if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE) - return 0; - - if (ah->ah_version == AR5K_AR5210) { - /* Only handle data queues, others will be ignored */ - if (tq->tqi_type != AR5K_TX_QUEUE_DATA) - return 0; - - /* Set Slot time */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME, - AR5K_SLOT_TIME); - /* Set ACK_CTS timeout */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_ACK_CTS_TIMEOUT_TURBO : - AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME); - /* Set Transmit Latency */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_TRANSMIT_LATENCY_TURBO : - AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210); - - /* Set IFS0 */ - if (ah->ah_turbo) { - ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO + - (ah->ah_aifs + tq->tqi_aifs) * - AR5K_INIT_SLOT_TIME_TURBO) << - AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO, - AR5K_IFS0); - } else { - ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS + - (ah->ah_aifs + tq->tqi_aifs) * - AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) | - AR5K_INIT_SIFS, AR5K_IFS0); - } - - /* Set IFS1 */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_PROTO_TIME_CNTRL_TURBO : - AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1); - /* Set AR5K_PHY_SETTLING */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) - | 0x38 : - (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) - | 0x1C, - AR5K_PHY_SETTLING); - /* Set Frame Control Register */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE | - AR5K_PHY_TURBO_SHORT | 0x2020) : - (AR5K_PHY_FRAME_CTL_INI | 0x1020), - AR5K_PHY_FRAME_CTL_5210); - } - - /* - * Calculate cwmin/max by channel mode - */ - cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN; - cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX; - ah->ah_aifs = AR5K_TUNE_AIFS; - /*XR is only supported on 5212*/ - if (IS_CHAN_XR(ah->ah_current_channel) && - ah->ah_version == AR5K_AR5212) { - cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR; - cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR; - ah->ah_aifs = AR5K_TUNE_AIFS_XR; - /*B mode is not supported on 5210*/ - } else if (IS_CHAN_B(ah->ah_current_channel) && - ah->ah_version != AR5K_AR5210) { - cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B; - cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B; - ah->ah_aifs = AR5K_TUNE_AIFS_11B; - } - - cw_min = 1; - while (cw_min < ah->ah_cw_min) - cw_min = (cw_min << 1) | 1; - - cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) : - ((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1); - cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) : - ((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1); - - /* - * Calculate and set retry limits - */ - if (ah->ah_software_retry) { - /* XXX Need to test this */ - retry_lg = ah->ah_limit_tx_retries; - retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ? - AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg; - } else { - retry_lg = AR5K_INIT_LG_RETRY; - retry_sh = AR5K_INIT_SH_RETRY; - } - - /*No QCU/DCU [5210]*/ - if (ah->ah_version == AR5K_AR5210) { - ath5k_hw_reg_write(ah, - (cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S) - | AR5K_REG_SM(AR5K_INIT_SLG_RETRY, - AR5K_NODCU_RETRY_LMT_SLG_RETRY) - | AR5K_REG_SM(AR5K_INIT_SSH_RETRY, - AR5K_NODCU_RETRY_LMT_SSH_RETRY) - | AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY) - | AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY), - AR5K_NODCU_RETRY_LMT); - } else { - /*QCU/DCU [5211+]*/ - ath5k_hw_reg_write(ah, - AR5K_REG_SM(AR5K_INIT_SLG_RETRY, - AR5K_DCU_RETRY_LMT_SLG_RETRY) | - AR5K_REG_SM(AR5K_INIT_SSH_RETRY, - AR5K_DCU_RETRY_LMT_SSH_RETRY) | - AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) | - AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY), - AR5K_QUEUE_DFS_RETRY_LIMIT(queue)); - - /*===Rest is also for QCU/DCU only [5211+]===*/ - - /* - * Set initial content window (cw_min/cw_max) - * and arbitrated interframe space (aifs)... - */ - ath5k_hw_reg_write(ah, - AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) | - AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) | - AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs, - AR5K_DCU_LCL_IFS_AIFS), - AR5K_QUEUE_DFS_LOCAL_IFS(queue)); - - /* - * Set misc registers - */ - ath5k_hw_reg_write(ah, AR5K_QCU_MISC_DCU_EARLY, - AR5K_QUEUE_MISC(queue)); - - if (tq->tqi_cbr_period) { - ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period, - AR5K_QCU_CBRCFG_INTVAL) | - AR5K_REG_SM(tq->tqi_cbr_overflow_limit, - AR5K_QCU_CBRCFG_ORN_THRES), - AR5K_QUEUE_CBRCFG(queue)); - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_FRSHED_CBR); - if (tq->tqi_cbr_overflow_limit) - AR5K_REG_ENABLE_BITS(ah, - AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_CBR_THRES_ENABLE); - } - - if (tq->tqi_ready_time) - ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time, - AR5K_QCU_RDYTIMECFG_INTVAL) | - AR5K_QCU_RDYTIMECFG_ENABLE, - AR5K_QUEUE_RDYTIMECFG(queue)); - - if (tq->tqi_burst_time) { - ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time, - AR5K_DCU_CHAN_TIME_DUR) | - AR5K_DCU_CHAN_TIME_ENABLE, - AR5K_QUEUE_DFS_CHANNEL_TIME(queue)); - - if (tq->tqi_flags - & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE) - AR5K_REG_ENABLE_BITS(ah, - AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_RDY_VEOL_POLICY); - } - - if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE) - ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS, - AR5K_QUEUE_DFS_MISC(queue)); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE) - ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG, - AR5K_QUEUE_DFS_MISC(queue)); - - /* - * Set registers by queue type - */ - switch (tq->tqi_type) { - case AR5K_TX_QUEUE_BEACON: - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_FRSHED_DBA_GT | - AR5K_QCU_MISC_CBREXP_BCN_DIS | - AR5K_QCU_MISC_BCN_ENABLE); - - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), - (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << - AR5K_DCU_MISC_ARBLOCK_CTL_S) | - AR5K_DCU_MISC_POST_FR_BKOFF_DIS | - AR5K_DCU_MISC_BCN_ENABLE); - - ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL - - (AR5K_TUNE_SW_BEACON_RESP - - AR5K_TUNE_DMA_BEACON_RESP) - - AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) | - AR5K_QCU_RDYTIMECFG_ENABLE, - AR5K_QUEUE_RDYTIMECFG(queue)); - break; - - case AR5K_TX_QUEUE_CAB: - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_FRSHED_DBA_GT | - AR5K_QCU_MISC_CBREXP_DIS | - AR5K_QCU_MISC_CBREXP_BCN_DIS); - - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), - (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << - AR5K_DCU_MISC_ARBLOCK_CTL_S)); - break; - - case AR5K_TX_QUEUE_UAPSD: - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_CBREXP_DIS); - break; - - case AR5K_TX_QUEUE_DATA: - default: - break; - } - - /* - * Enable interrupts for this tx queue - * in the secondary interrupt mask registers - */ - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRORNINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrorn, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRURNINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrurn, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_QTRIGINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_qtrig, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_nofrm, queue); - - /* Update secondary interrupt mask registers */ - - /* Filter out inactive queues */ - ah->ah_txq_imr_txok &= ah->ah_txq_status; - ah->ah_txq_imr_txerr &= ah->ah_txq_status; - ah->ah_txq_imr_txurn &= ah->ah_txq_status; - ah->ah_txq_imr_txdesc &= ah->ah_txq_status; - ah->ah_txq_imr_txeol &= ah->ah_txq_status; - ah->ah_txq_imr_cbrorn &= ah->ah_txq_status; - ah->ah_txq_imr_cbrurn &= ah->ah_txq_status; - ah->ah_txq_imr_qtrig &= ah->ah_txq_status; - ah->ah_txq_imr_nofrm &= ah->ah_txq_status; - - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok, - AR5K_SIMR0_QCU_TXOK) | - AR5K_REG_SM(ah->ah_txq_imr_txdesc, - AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0); - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr, - AR5K_SIMR1_QCU_TXERR) | - AR5K_REG_SM(ah->ah_txq_imr_txeol, - AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1); - /* Update simr2 but don't overwrite rest simr2 settings */ - AR5K_REG_DISABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_QCU_TXURN); - AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, - AR5K_REG_SM(ah->ah_txq_imr_txurn, - AR5K_SIMR2_QCU_TXURN)); - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_cbrorn, - AR5K_SIMR3_QCBRORN) | - AR5K_REG_SM(ah->ah_txq_imr_cbrurn, - AR5K_SIMR3_QCBRURN), AR5K_SIMR3); - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_qtrig, - AR5K_SIMR4_QTRIG), AR5K_SIMR4); - /* Set TXNOFRM_QCU for the queues with TXNOFRM enabled */ - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_nofrm, - AR5K_TXNOFRM_QCU), AR5K_TXNOFRM); - /* No queue has TXNOFRM enabled, disable the interrupt - * by setting AR5K_TXNOFRM to zero */ - if (ah->ah_txq_imr_nofrm == 0) - ath5k_hw_reg_write(ah, 0, AR5K_TXNOFRM); - } - - return 0; -} - -/* - * Get slot time from DCU - */ -unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - if (ah->ah_version == AR5K_AR5210) - return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah, - AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo); - else - return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff; -} - -/* - * Set slot time on DCU - */ -int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time) -{ - ATH5K_TRACE(ah->ah_sc); - if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX) - return -EINVAL; - - if (ah->ah_version == AR5K_AR5210) - ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time, - ah->ah_turbo), AR5K_SLOT_TIME); - else - ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT); - - return 0; -} - diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h deleted file mode 100644 index 9189ab13286..00000000000 --- a/drivers/net/wireless/ath5k/reg.h +++ /dev/null @@ -1,2592 +0,0 @@ -/* - * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -/* - * Register values for Atheros 5210/5211/5212 cards from OpenBSD's ar5k - * maintained by Reyk Floeter - * - * I tried to document those registers by looking at ar5k code, some - * 802.11 (802.11e mostly) papers and by reading various public available - * Atheros presentations and papers like these: - * - * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf - * http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf - * - * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf - * - * This file also contains register values found on a memory dump of - * Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal - * released by Atheros and on various debug messages found on the net. - */ - - - -/*====MAC DMA REGISTERS====*/ - -/* - * AR5210-Specific TXDP registers - * 5210 has only 2 transmit queues so no DCU/QCU, just - * 2 transmit descriptor pointers... - */ -#define AR5K_NOQCU_TXDP0 0x0000 /* Queue 0 - data */ -#define AR5K_NOQCU_TXDP1 0x0004 /* Queue 1 - beacons */ - -/* - * Mac Control Register - */ -#define AR5K_CR 0x0008 /* Register Address */ -#define AR5K_CR_TXE0 0x00000001 /* TX Enable for queue 0 on 5210 */ -#define AR5K_CR_TXE1 0x00000002 /* TX Enable for queue 1 on 5210 */ -#define AR5K_CR_RXE 0x00000004 /* RX Enable */ -#define AR5K_CR_TXD0 0x00000008 /* TX Disable for queue 0 on 5210 */ -#define AR5K_CR_TXD1 0x00000010 /* TX Disable for queue 1 on 5210 */ -#define AR5K_CR_RXD 0x00000020 /* RX Disable */ -#define AR5K_CR_SWI 0x00000040 /* Software Interrupt */ - -/* - * RX Descriptor Pointer register - */ -#define AR5K_RXDP 0x000c - -/* - * Configuration and status register - */ -#define AR5K_CFG 0x0014 /* Register Address */ -#define AR5K_CFG_SWTD 0x00000001 /* Byte-swap TX descriptor (for big endian archs) */ -#define AR5K_CFG_SWTB 0x00000002 /* Byte-swap TX buffer */ -#define AR5K_CFG_SWRD 0x00000004 /* Byte-swap RX descriptor */ -#define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer */ -#define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register access */ -#define AR5K_CFG_IBSS 0x00000020 /* 0-BSS, 1-IBSS [5211+] */ -#define AR5K_CFG_PHY_OK 0x00000100 /* [5211+] */ -#define AR5K_CFG_EEBS 0x00000200 /* EEPROM is busy */ -#define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (Disable dynamic clock) */ -#define AR5K_CFG_TXCNT 0x00007800 /* Tx frame count (?) [5210] */ -#define AR5K_CFG_TXCNT_S 11 -#define AR5K_CFG_TXFSTAT 0x00008000 /* Tx frame status (?) [5210] */ -#define AR5K_CFG_TXFSTRT 0x00010000 /* [5210] */ -#define AR5K_CFG_PCI_THRES 0x00060000 /* PCI Master req q threshold [5211+] */ -#define AR5K_CFG_PCI_THRES_S 17 - -/* - * Interrupt enable register - */ -#define AR5K_IER 0x0024 /* Register Address */ -#define AR5K_IER_DISABLE 0x00000000 /* Disable card interrupts */ -#define AR5K_IER_ENABLE 0x00000001 /* Enable card interrupts */ - - -/* - * 0x0028 is Beacon Control Register on 5210 - * and first RTS duration register on 5211 - */ - -/* - * Beacon control register [5210] - */ -#define AR5K_BCR 0x0028 /* Register Address */ -#define AR5K_BCR_AP 0x00000000 /* AP mode */ -#define AR5K_BCR_ADHOC 0x00000001 /* Ad-Hoc mode */ -#define AR5K_BCR_BDMAE 0x00000002 /* DMA enable */ -#define AR5K_BCR_TQ1FV 0x00000004 /* Use Queue1 for CAB traffic */ -#define AR5K_BCR_TQ1V 0x00000008 /* Use Queue1 for Beacon traffic */ -#define AR5K_BCR_BCGET 0x00000010 - -/* - * First RTS duration register [5211] - */ -#define AR5K_RTSD0 0x0028 /* Register Address */ -#define AR5K_RTSD0_6 0x000000ff /* 6Mb RTS duration mask (?) */ -#define AR5K_RTSD0_6_S 0 /* 6Mb RTS duration shift (?) */ -#define AR5K_RTSD0_9 0x0000ff00 /* 9Mb*/ -#define AR5K_RTSD0_9_S 8 -#define AR5K_RTSD0_12 0x00ff0000 /* 12Mb*/ -#define AR5K_RTSD0_12_S 16 -#define AR5K_RTSD0_18 0xff000000 /* 16Mb*/ -#define AR5K_RTSD0_18_S 24 - - -/* - * 0x002c is Beacon Status Register on 5210 - * and second RTS duration register on 5211 - */ - -/* - * Beacon status register [5210] - * - * As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR - * for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning - * here and SNP/SNAP means "snapshot" (so this register gets synced with BCR). - * So SNAPPEDBCRVALID sould also stand for "snapped BCR -values- valid", so i - * renamed it to SNAPSHOTSVALID to make more sense. I realy have no idea what - * else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR. - */ -#define AR5K_BSR 0x002c /* Register Address */ -#define AR5K_BSR_BDLYSW 0x00000001 /* SW Beacon delay (?) */ -#define AR5K_BSR_BDLYDMA 0x00000002 /* DMA Beacon delay (?) */ -#define AR5K_BSR_TXQ1F 0x00000004 /* Beacon queue (1) finished */ -#define AR5K_BSR_ATIMDLY 0x00000008 /* ATIM delay (?) */ -#define AR5K_BSR_SNPADHOC 0x00000100 /* Ad-hoc mode set (?) */ -#define AR5K_BSR_SNPBDMAE 0x00000200 /* Beacon DMA enabled (?) */ -#define AR5K_BSR_SNPTQ1FV 0x00000400 /* Queue1 is used for CAB traffic (?) */ -#define AR5K_BSR_SNPTQ1V 0x00000800 /* Queue1 is used for Beacon traffic (?) */ -#define AR5K_BSR_SNAPSHOTSVALID 0x00001000 /* BCR snapshots are valid (?) */ -#define AR5K_BSR_SWBA_CNT 0x00ff0000 - -/* - * Second RTS duration register [5211] - */ -#define AR5K_RTSD1 0x002c /* Register Address */ -#define AR5K_RTSD1_24 0x000000ff /* 24Mb */ -#define AR5K_RTSD1_24_S 0 -#define AR5K_RTSD1_36 0x0000ff00 /* 36Mb */ -#define AR5K_RTSD1_36_S 8 -#define AR5K_RTSD1_48 0x00ff0000 /* 48Mb */ -#define AR5K_RTSD1_48_S 16 -#define AR5K_RTSD1_54 0xff000000 /* 54Mb */ -#define AR5K_RTSD1_54_S 24 - - -/* - * Transmit configuration register - */ -#define AR5K_TXCFG 0x0030 /* Register Address */ -#define AR5K_TXCFG_SDMAMR 0x00000007 /* DMA size (read) */ -#define AR5K_TXCFG_SDMAMR_S 0 -#define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */ -#define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */ -#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Triger level mask */ -#define AR5K_TXCFG_TXFULL_S 4 -#define AR5K_TXCFG_TXFULL_0B 0x00000000 -#define AR5K_TXCFG_TXFULL_64B 0x00000010 -#define AR5K_TXCFG_TXFULL_128B 0x00000020 -#define AR5K_TXCFG_TXFULL_192B 0x00000030 -#define AR5K_TXCFG_TXFULL_256B 0x00000040 -#define AR5K_TXCFG_TXCONT_EN 0x00000080 -#define AR5K_TXCFG_DMASIZE 0x00000100 /* Flag for passing DMA size [5210] */ -#define AR5K_TXCFG_JUMBO_DESC_EN 0x00000400 /* Enable jumbo tx descriptors [5211+] */ -#define AR5K_TXCFG_ADHOC_BCN_ATIM 0x00000800 /* Adhoc Beacon ATIM Policy */ -#define AR5K_TXCFG_ATIM_WINDOW_DEF_DIS 0x00001000 /* Disable ATIM window defer [5211+] */ -#define AR5K_TXCFG_RTSRND 0x00001000 /* [5211+] */ -#define AR5K_TXCFG_FRMPAD_DIS 0x00002000 /* [5211+] */ -#define AR5K_TXCFG_RDY_CBR_DIS 0x00004000 /* Ready time CBR disable [5211+] */ -#define AR5K_TXCFG_JUMBO_FRM_MODE 0x00008000 /* Jumbo frame mode [5211+] */ -#define AR5K_TXCFG_DCU_CACHING_DIS 0x00010000 /* Disable DCU caching */ - -/* - * Receive configuration register - */ -#define AR5K_RXCFG 0x0034 /* Register Address */ -#define AR5K_RXCFG_SDMAMW 0x00000007 /* DMA size (write) */ -#define AR5K_RXCFG_SDMAMW_S 0 -#define AR5K_RXCFG_ZLFDMA 0x00000008 /* Enable Zero-length frame DMA */ -#define AR5K_RXCFG_DEF_ANTENNA 0x00000010 /* Default antenna (?) */ -#define AR5K_RXCFG_JUMBO_RXE 0x00000020 /* Enable jumbo rx descriptors [5211+] */ -#define AR5K_RXCFG_JUMBO_WRAP 0x00000040 /* Wrap jumbo frames [5211+] */ -#define AR5K_RXCFG_SLE_ENTRY 0x00000080 /* Sleep entry policy */ - -/* - * Receive jumbo descriptor last address register - * Only found in 5211 (?) - */ -#define AR5K_RXJLA 0x0038 - -/* - * MIB control register - */ -#define AR5K_MIBC 0x0040 /* Register Address */ -#define AR5K_MIBC_COW 0x00000001 /* Warn test indicator */ -#define AR5K_MIBC_FMC 0x00000002 /* Freeze MIB Counters */ -#define AR5K_MIBC_CMC 0x00000004 /* Clean MIB Counters */ -#define AR5K_MIBC_MCS 0x00000008 /* MIB counter strobe */ - -/* - * Timeout prescale register - */ -#define AR5K_TOPS 0x0044 -#define AR5K_TOPS_M 0x0000ffff - -/* - * Receive timeout register (no frame received) - */ -#define AR5K_RXNOFRM 0x0048 -#define AR5K_RXNOFRM_M 0x000003ff - -/* - * Transmit timeout register (no frame sent) - */ -#define AR5K_TXNOFRM 0x004c -#define AR5K_TXNOFRM_M 0x000003ff -#define AR5K_TXNOFRM_QCU 0x000ffc00 -#define AR5K_TXNOFRM_QCU_S 10 - -/* - * Receive frame gap timeout register - */ -#define AR5K_RPGTO 0x0050 -#define AR5K_RPGTO_M 0x000003ff - -/* - * Receive frame count limit register - */ -#define AR5K_RFCNT 0x0054 -#define AR5K_RFCNT_M 0x0000001f /* [5211+] (?) */ -#define AR5K_RFCNT_RFCL 0x0000000f /* [5210] */ - -/* - * Misc settings register - * (reserved0-3) - */ -#define AR5K_MISC 0x0058 /* Register Address */ -#define AR5K_MISC_DMA_OBS_M 0x000001e0 -#define AR5K_MISC_DMA_OBS_S 5 -#define AR5K_MISC_MISC_OBS_M 0x00000e00 -#define AR5K_MISC_MISC_OBS_S 9 -#define AR5K_MISC_MAC_OBS_LSB_M 0x00007000 -#define AR5K_MISC_MAC_OBS_LSB_S 12 -#define AR5K_MISC_MAC_OBS_MSB_M 0x00038000 -#define AR5K_MISC_MAC_OBS_MSB_S 15 -#define AR5K_MISC_LED_DECAY 0x001c0000 /* [5210] */ -#define AR5K_MISC_LED_BLINK 0x00e00000 /* [5210] */ - -/* - * QCU/DCU clock gating register (5311) - * (reserved4-5) - */ -#define AR5K_QCUDCU_CLKGT 0x005c /* Register Address (?) */ -#define AR5K_QCUDCU_CLKGT_QCU 0x0000ffff /* Mask for QCU clock */ -#define AR5K_QCUDCU_CLKGT_DCU 0x07ff0000 /* Mask for DCU clock */ - -/* - * Interrupt Status Registers - * - * For 5210 there is only one status register but for - * 5211/5212 we have one primary and 4 secondary registers. - * So we have AR5K_ISR for 5210 and AR5K_PISR /SISRx for 5211/5212. - * Most of these bits are common for all chipsets. - */ -#define AR5K_ISR 0x001c /* Register Address [5210] */ -#define AR5K_PISR 0x0080 /* Register Address [5211+] */ -#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly recieved */ -#define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */ -#define AR5K_ISR_RXERR 0x00000004 /* Receive error */ -#define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */ -#define AR5K_ISR_RXEOL 0x00000010 /* Empty RX descriptor */ -#define AR5K_ISR_RXORN 0x00000020 /* Receive FIFO overrun */ -#define AR5K_ISR_TXOK 0x00000040 /* Frame successfuly transmited */ -#define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */ -#define AR5K_ISR_TXERR 0x00000100 /* Transmit error */ -#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout) */ -#define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */ -#define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */ -#define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */ -#define AR5K_ISR_SWI 0x00002000 /* Software interrupt */ -#define AR5K_ISR_RXPHY 0x00004000 /* PHY error */ -#define AR5K_ISR_RXKCM 0x00008000 /* RX Key cache miss */ -#define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */ -#define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ -#define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */ -#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ -#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */ -#define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ -#define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */ -#define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */ -#define AR5K_ISR_DPERR 0x00400000 /* Det par Error (?) [5210] */ -#define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ -#define AR5K_ISR_TIM 0x00800000 /* [5211+] */ -#define AR5K_ISR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, - CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ -#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */ -#define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */ -#define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */ -#define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ - -/* - * Secondary status registers [5211+] (0 - 4) - * - * These give the status for each QCU, only QCUs 0-9 are - * represented. - */ -#define AR5K_SISR0 0x0084 /* Register Address [5211+] */ -#define AR5K_SISR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */ -#define AR5K_SISR0_QCU_TXOK_S 0 -#define AR5K_SISR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */ -#define AR5K_SISR0_QCU_TXDESC_S 16 - -#define AR5K_SISR1 0x0088 /* Register Address [5211+] */ -#define AR5K_SISR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */ -#define AR5K_SISR1_QCU_TXERR_S 0 -#define AR5K_SISR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */ -#define AR5K_SISR1_QCU_TXEOL_S 16 - -#define AR5K_SISR2 0x008c /* Register Address [5211+] */ -#define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ -#define AR5K_SISR2_QCU_TXURN_S 0 -#define AR5K_SISR2_MCABT 0x00100000 /* Master Cycle Abort */ -#define AR5K_SISR2_SSERR 0x00200000 /* Signaled System Error */ -#define AR5K_SISR2_DPERR 0x00400000 /* Bus parity error */ -#define AR5K_SISR2_TIM 0x01000000 /* [5212+] */ -#define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */ -#define AR5K_SISR2_DTIM_SYNC 0x04000000 /* DTIM sync lost [5212+] */ -#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ -#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ -#define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */ -#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF OOR (?) */ - -#define AR5K_SISR3 0x0090 /* Register Address [5211+] */ -#define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ -#define AR5K_SISR3_QCBRORN_S 0 -#define AR5K_SISR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */ -#define AR5K_SISR3_QCBRURN_S 16 - -#define AR5K_SISR4 0x0094 /* Register Address [5211+] */ -#define AR5K_SISR4_QTRIG 0x000003ff /* Mask for QTRIG */ -#define AR5K_SISR4_QTRIG_S 0 - -/* - * Shadow read-and-clear interrupt status registers [5211+] - */ -#define AR5K_RAC_PISR 0x00c0 /* Read and clear PISR */ -#define AR5K_RAC_SISR0 0x00c4 /* Read and clear SISR0 */ -#define AR5K_RAC_SISR1 0x00c8 /* Read and clear SISR1 */ -#define AR5K_RAC_SISR2 0x00cc /* Read and clear SISR2 */ -#define AR5K_RAC_SISR3 0x00d0 /* Read and clear SISR3 */ -#define AR5K_RAC_SISR4 0x00d4 /* Read and clear SISR4 */ - -/* - * Interrupt Mask Registers - * - * As whith ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary - * (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match. - */ -#define AR5K_IMR 0x0020 /* Register Address [5210] */ -#define AR5K_PIMR 0x00a0 /* Register Address [5211+] */ -#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly recieved*/ -#define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/ -#define AR5K_IMR_RXERR 0x00000004 /* Receive error*/ -#define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/ -#define AR5K_IMR_RXEOL 0x00000010 /* Empty RX descriptor*/ -#define AR5K_IMR_RXORN 0x00000020 /* Receive FIFO overrun*/ -#define AR5K_IMR_TXOK 0x00000040 /* Frame successfuly transmited*/ -#define AR5K_IMR_TXDESC 0x00000080 /* TX descriptor request*/ -#define AR5K_IMR_TXERR 0x00000100 /* Transmit error*/ -#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout)*/ -#define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/ -#define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/ -#define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/ -#define AR5K_IMR_SWI 0x00002000 /* Software interrupt */ -#define AR5K_IMR_RXPHY 0x00004000 /* PHY error*/ -#define AR5K_IMR_RXKCM 0x00008000 /* RX Key cache miss */ -#define AR5K_IMR_SWBA 0x00010000 /* Software beacon alert*/ -#define AR5K_IMR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ -#define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/ -#define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ -#define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */ -#define AR5K_IMR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ -#define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/ -#define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */ -#define AR5K_IMR_DPERR 0x00400000 /* Det par Error (?) [5210] */ -#define AR5K_IMR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ -#define AR5K_IMR_TIM 0x00800000 /* [5211+] */ -#define AR5K_IMR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, - CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ -#define AR5K_IMR_GPIO 0x01000000 /* GPIO (rf kill)*/ -#define AR5K_IMR_QCBRORN 0x02000000 /* QCU CBR overrun (?) [5211+] */ -#define AR5K_IMR_QCBRURN 0x04000000 /* QCU CBR underrun (?) [5211+] */ -#define AR5K_IMR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ - -/* - * Secondary interrupt mask registers [5211+] (0 - 4) - */ -#define AR5K_SIMR0 0x00a4 /* Register Address [5211+] */ -#define AR5K_SIMR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */ -#define AR5K_SIMR0_QCU_TXOK_S 0 -#define AR5K_SIMR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */ -#define AR5K_SIMR0_QCU_TXDESC_S 16 - -#define AR5K_SIMR1 0x00a8 /* Register Address [5211+] */ -#define AR5K_SIMR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */ -#define AR5K_SIMR1_QCU_TXERR_S 0 -#define AR5K_SIMR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */ -#define AR5K_SIMR1_QCU_TXEOL_S 16 - -#define AR5K_SIMR2 0x00ac /* Register Address [5211+] */ -#define AR5K_SIMR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ -#define AR5K_SIMR2_QCU_TXURN_S 0 -#define AR5K_SIMR2_MCABT 0x00100000 /* Master Cycle Abort */ -#define AR5K_SIMR2_SSERR 0x00200000 /* Signaled System Error */ -#define AR5K_SIMR2_DPERR 0x00400000 /* Bus parity error */ -#define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */ -#define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */ -#define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* DTIM Sync lost [5212+] */ -#define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ -#define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ -#define AR5K_SIMR2_DTIM 0x20000000 /* [5212+] */ -#define AR5K_SIMR2_TSFOOR 0x80000000 /* TSF OOR (?) */ - -#define AR5K_SIMR3 0x00b0 /* Register Address [5211+] */ -#define AR5K_SIMR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ -#define AR5K_SIMR3_QCBRORN_S 0 -#define AR5K_SIMR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */ -#define AR5K_SIMR3_QCBRURN_S 16 - -#define AR5K_SIMR4 0x00b4 /* Register Address [5211+] */ -#define AR5K_SIMR4_QTRIG 0x000003ff /* Mask for QTRIG */ -#define AR5K_SIMR4_QTRIG_S 0 - -/* - * DMA Debug registers 0-7 - * 0xe0 - 0xfc - */ - -/* - * Decompression mask registers [5212+] - */ -#define AR5K_DCM_ADDR 0x0400 /*Decompression mask address (index) */ -#define AR5K_DCM_DATA 0x0404 /*Decompression mask data */ - -/* - * Wake On Wireless pattern control register [5212+] - */ -#define AR5K_WOW_PCFG 0x0410 /* Register Address */ -#define AR5K_WOW_PCFG_PAT_MATCH_EN 0x00000001 /* Pattern match enable */ -#define AR5K_WOW_PCFG_LONG_FRAME_POL 0x00000002 /* Long frame policy */ -#define AR5K_WOW_PCFG_WOBMISS 0x00000004 /* Wake on bea(con) miss (?) */ -#define AR5K_WOW_PCFG_PAT_0_EN 0x00000100 /* Enable pattern 0 */ -#define AR5K_WOW_PCFG_PAT_1_EN 0x00000200 /* Enable pattern 1 */ -#define AR5K_WOW_PCFG_PAT_2_EN 0x00000400 /* Enable pattern 2 */ -#define AR5K_WOW_PCFG_PAT_3_EN 0x00000800 /* Enable pattern 3 */ -#define AR5K_WOW_PCFG_PAT_4_EN 0x00001000 /* Enable pattern 4 */ -#define AR5K_WOW_PCFG_PAT_5_EN 0x00002000 /* Enable pattern 5 */ - -/* - * Wake On Wireless pattern index register (?) [5212+] - */ -#define AR5K_WOW_PAT_IDX 0x0414 - -/* - * Wake On Wireless pattern data register [5212+] - */ -#define AR5K_WOW_PAT_DATA 0x0418 /* Register Address */ -#define AR5K_WOW_PAT_DATA_0_3_V 0x00000001 /* Pattern 0, 3 value */ -#define AR5K_WOW_PAT_DATA_1_4_V 0x00000100 /* Pattern 1, 4 value */ -#define AR5K_WOW_PAT_DATA_2_5_V 0x00010000 /* Pattern 2, 5 value */ -#define AR5K_WOW_PAT_DATA_0_3_M 0x01000000 /* Pattern 0, 3 mask */ -#define AR5K_WOW_PAT_DATA_1_4_M 0x04000000 /* Pattern 1, 4 mask */ -#define AR5K_WOW_PAT_DATA_2_5_M 0x10000000 /* Pattern 2, 5 mask */ - -/* - * Decompression configuration registers [5212+] - */ -#define AR5K_DCCFG 0x0420 /* Register Address */ -#define AR5K_DCCFG_GLOBAL_EN 0x00000001 /* Enable decompression on all queues */ -#define AR5K_DCCFG_BYPASS_EN 0x00000002 /* Bypass decompression */ -#define AR5K_DCCFG_BCAST_EN 0x00000004 /* Enable decompression for bcast frames */ -#define AR5K_DCCFG_MCAST_EN 0x00000008 /* Enable decompression for mcast frames */ - -/* - * Compression configuration registers [5212+] - */ -#define AR5K_CCFG 0x0600 /* Register Address */ -#define AR5K_CCFG_WINDOW_SIZE 0x00000007 /* Compression window size */ -#define AR5K_CCFG_CPC_EN 0x00000008 /* Enable performance counters */ - -#define AR5K_CCFG_CCU 0x0604 /* Register Address */ -#define AR5K_CCFG_CCU_CUP_EN 0x00000001 /* CCU Catchup enable */ -#define AR5K_CCFG_CCU_CREDIT 0x00000002 /* CCU Credit (field) */ -#define AR5K_CCFG_CCU_CD_THRES 0x00000080 /* CCU Cyc(lic?) debt threshold (field) */ -#define AR5K_CCFG_CCU_CUP_LCNT 0x00010000 /* CCU Catchup lit(?) count */ -#define AR5K_CCFG_CCU_INIT 0x00100200 /* Initial value during reset */ - -/* - * Compression performance counter registers [5212+] - */ -#define AR5K_CPC0 0x0610 /* Compression performance counter 0 */ -#define AR5K_CPC1 0x0614 /* Compression performance counter 1*/ -#define AR5K_CPC2 0x0618 /* Compression performance counter 2 */ -#define AR5K_CPC3 0x061c /* Compression performance counter 3 */ -#define AR5K_CPCOVF 0x0620 /* Compression performance overflow */ - - -/* - * Queue control unit (QCU) registers [5211+] - * - * Card has 12 TX Queues but i see that only 0-9 are used (?) - * both in binary HAL (see ah.h) and ar5k. Each queue has it's own - * TXDP at addresses 0x0800 - 0x082c, a CBR (Constant Bit Rate) - * configuration register (0x08c0 - 0x08ec), a ready time configuration - * register (0x0900 - 0x092c), a misc configuration register (0x09c0 - - * 0x09ec) and a status register (0x0a00 - 0x0a2c). We also have some - * global registers, QCU transmit enable/disable and "one shot arm (?)" - * set/clear, which contain status for all queues (we shift by 1 for each - * queue). To access these registers easily we define some macros here - * that are used inside HAL. For more infos check out *_tx_queue functs. - */ - -/* - * Generic QCU Register access macros - */ -#define AR5K_QUEUE_REG(_r, _q) (((_q) << 2) + _r) -#define AR5K_QCU_GLOBAL_READ(_r, _q) (AR5K_REG_READ(_r) & (1 << _q)) -#define AR5K_QCU_GLOBAL_WRITE(_r, _q) AR5K_REG_WRITE(_r, (1 << _q)) - -/* - * QCU Transmit descriptor pointer registers - */ -#define AR5K_QCU_TXDP_BASE 0x0800 /* Register Address - Queue0 TXDP */ -#define AR5K_QUEUE_TXDP(_q) AR5K_QUEUE_REG(AR5K_QCU_TXDP_BASE, _q) - -/* - * QCU Transmit enable register - */ -#define AR5K_QCU_TXE 0x0840 -#define AR5K_ENABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXE, _q) -#define AR5K_QUEUE_ENABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXE, _q) - -/* - * QCU Transmit disable register - */ -#define AR5K_QCU_TXD 0x0880 -#define AR5K_DISABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXD, _q) -#define AR5K_QUEUE_DISABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXD, _q) - -/* - * QCU Constant Bit Rate configuration registers - */ -#define AR5K_QCU_CBRCFG_BASE 0x08c0 /* Register Address - Queue0 CBRCFG */ -#define AR5K_QCU_CBRCFG_INTVAL 0x00ffffff /* CBR Interval mask */ -#define AR5K_QCU_CBRCFG_INTVAL_S 0 -#define AR5K_QCU_CBRCFG_ORN_THRES 0xff000000 /* CBR overrun threshold mask */ -#define AR5K_QCU_CBRCFG_ORN_THRES_S 24 -#define AR5K_QUEUE_CBRCFG(_q) AR5K_QUEUE_REG(AR5K_QCU_CBRCFG_BASE, _q) - -/* - * QCU Ready time configuration registers - */ -#define AR5K_QCU_RDYTIMECFG_BASE 0x0900 /* Register Address - Queue0 RDYTIMECFG */ -#define AR5K_QCU_RDYTIMECFG_INTVAL 0x00ffffff /* Ready time interval mask */ -#define AR5K_QCU_RDYTIMECFG_INTVAL_S 0 -#define AR5K_QCU_RDYTIMECFG_ENABLE 0x01000000 /* Ready time enable mask */ -#define AR5K_QUEUE_RDYTIMECFG(_q) AR5K_QUEUE_REG(AR5K_QCU_RDYTIMECFG_BASE, _q) - -/* - * QCU one shot arm set registers - */ -#define AR5K_QCU_ONESHOTARM_SET 0x0940 /* Register Address -QCU "one shot arm set (?)" */ -#define AR5K_QCU_ONESHOTARM_SET_M 0x0000ffff - -/* - * QCU one shot arm clear registers - */ -#define AR5K_QCU_ONESHOTARM_CLEAR 0x0980 /* Register Address -QCU "one shot arm clear (?)" */ -#define AR5K_QCU_ONESHOTARM_CLEAR_M 0x0000ffff - -/* - * QCU misc registers - */ -#define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */ -#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */ -#define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */ -#define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */ -#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */ -#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* TIMT gated */ -#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated */ -#define AR5K_QCU_MISC_ONESHOT_ENABLE 0x00000010 /* Oneshot enable */ -#define AR5K_QCU_MISC_CBREXP_DIS 0x00000020 /* Disable CBR expired counter (normal queue) */ -#define AR5K_QCU_MISC_CBREXP_BCN_DIS 0x00000040 /* Disable CBR expired counter (beacon queue) */ -#define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Enable Beacon use */ -#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR expired threshold enabled */ -#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME expired or VEOL */ -#define AR5K_QCU_MISC_CBR_RESET_CNT 0x00000400 /* CBR threshold (counter) reset */ -#define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU early termination */ -#define AR5K_QCU_MISC_DCU_CMP_EN 0x00001000 /* Enable frame compression */ -#define AR5K_QUEUE_MISC(_q) AR5K_QUEUE_REG(AR5K_QCU_MISC_BASE, _q) - - -/* - * QCU status registers - */ -#define AR5K_QCU_STS_BASE 0x0a00 /* Register Address - Queue0 STS */ -#define AR5K_QCU_STS_FRMPENDCNT 0x00000003 /* Frames pending counter */ -#define AR5K_QCU_STS_CBREXPCNT 0x0000ff00 /* CBR expired counter */ -#define AR5K_QUEUE_STATUS(_q) AR5K_QUEUE_REG(AR5K_QCU_STS_BASE, _q) - -/* - * QCU ready time shutdown register - */ -#define AR5K_QCU_RDYTIMESHDN 0x0a40 -#define AR5K_QCU_RDYTIMESHDN_M 0x000003ff - -/* - * QCU compression buffer base registers [5212+] - */ -#define AR5K_QCU_CBB_SELECT 0x0b00 -#define AR5K_QCU_CBB_ADDR 0x0b04 -#define AR5K_QCU_CBB_ADDR_S 9 - -/* - * QCU compression buffer configuration register [5212+] - * (buffer size) - */ -#define AR5K_QCU_CBCFG 0x0b08 - - - -/* - * Distributed Coordination Function (DCF) control unit (DCU) - * registers [5211+] - * - * These registers control the various characteristics of each queue - * for 802.11e (WME) combatibility so they go together with - * QCU registers in pairs. For each queue we have a QCU mask register, - * (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c), - * a retry limit register (0x1080 - 0x10ac), a channel time register - * (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and - * a sequence number register (0x1140 - 0x116c). It seems that "global" - * registers here afect all queues (see use of DCU_GBL_IFS_SLOT in ar5k). - * We use the same macros here for easier register access. - * - */ - -/* - * DCU QCU mask registers - */ -#define AR5K_DCU_QCUMASK_BASE 0x1000 /* Register Address -Queue0 DCU_QCUMASK */ -#define AR5K_DCU_QCUMASK_M 0x000003ff -#define AR5K_QUEUE_QCUMASK(_q) AR5K_QUEUE_REG(AR5K_DCU_QCUMASK_BASE, _q) - -/* - * DCU local Inter Frame Space settings register - */ -#define AR5K_DCU_LCL_IFS_BASE 0x1040 /* Register Address -Queue0 DCU_LCL_IFS */ -#define AR5K_DCU_LCL_IFS_CW_MIN 0x000003ff /* Minimum Contention Window */ -#define AR5K_DCU_LCL_IFS_CW_MIN_S 0 -#define AR5K_DCU_LCL_IFS_CW_MAX 0x000ffc00 /* Maximum Contention Window */ -#define AR5K_DCU_LCL_IFS_CW_MAX_S 10 -#define AR5K_DCU_LCL_IFS_AIFS 0x0ff00000 /* Arbitrated Interframe Space */ -#define AR5K_DCU_LCL_IFS_AIFS_S 20 -#define AR5K_DCU_LCL_IFS_AIFS_MAX 0xfc /* Anything above that can cause DCU to hang */ -#define AR5K_QUEUE_DFS_LOCAL_IFS(_q) AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q) - -/* - * DCU retry limit registers - */ -#define AR5K_DCU_RETRY_LMT_BASE 0x1080 /* Register Address -Queue0 DCU_RETRY_LMT */ -#define AR5K_DCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */ -#define AR5K_DCU_RETRY_LMT_SH_RETRY_S 0 -#define AR5K_DCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry limit mask */ -#define AR5K_DCU_RETRY_LMT_LG_RETRY_S 4 -#define AR5K_DCU_RETRY_LMT_SSH_RETRY 0x00003f00 /* Station short retry limit mask (?) */ -#define AR5K_DCU_RETRY_LMT_SSH_RETRY_S 8 -#define AR5K_DCU_RETRY_LMT_SLG_RETRY 0x000fc000 /* Station long retry limit mask (?) */ -#define AR5K_DCU_RETRY_LMT_SLG_RETRY_S 14 -#define AR5K_QUEUE_DFS_RETRY_LIMIT(_q) AR5K_QUEUE_REG(AR5K_DCU_RETRY_LMT_BASE, _q) - -/* - * DCU channel time registers - */ -#define AR5K_DCU_CHAN_TIME_BASE 0x10c0 /* Register Address -Queue0 DCU_CHAN_TIME */ -#define AR5K_DCU_CHAN_TIME_DUR 0x000fffff /* Channel time duration */ -#define AR5K_DCU_CHAN_TIME_DUR_S 0 -#define AR5K_DCU_CHAN_TIME_ENABLE 0x00100000 /* Enable channel time */ -#define AR5K_QUEUE_DFS_CHANNEL_TIME(_q) AR5K_QUEUE_REG(AR5K_DCU_CHAN_TIME_BASE, _q) - -/* - * DCU misc registers [5211+] - * - * Note: Arbiter lockout control controls the - * behaviour on low priority queues when we have multiple queues - * with pending frames. Intra-frame lockout means we wait until - * the queue's current frame transmits (with post frame backoff and bursting) - * before we transmit anything else and global lockout means we - * wait for the whole queue to finish before higher priority queues - * can transmit (this is used on beacon and CAB queues). - * No lockout means there is no special handling. - */ -#define AR5K_DCU_MISC_BASE 0x1100 /* Register Address -Queue0 DCU_MISC */ -#define AR5K_DCU_MISC_BACKOFF 0x0000003f /* Mask for backoff threshold */ -#define AR5K_DCU_MISC_ETS_RTS_POL 0x00000040 /* End of transmission series - station RTS/data failure count - reset policy (?) */ -#define AR5K_DCU_MISC_ETS_CW_POL 0x00000080 /* End of transmission series - CW reset policy */ -#define AR5K_DCU_MISC_FRAG_WAIT 0x00000100 /* Wait for next fragment */ -#define AR5K_DCU_MISC_BACKOFF_FRAG 0x00000200 /* Enable backoff while bursting */ -#define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll enable */ -#define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff */ -#define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch */ -#define AR5K_DCU_MISC_VIRTCOL 0x0000c000 /* Mask for Virtual Collision (?) */ -#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0 -#define AR5K_DCU_MISC_VIRTCOL_IGNORE 1 -#define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Enable Beacon use */ -#define AR5K_DCU_MISC_ARBLOCK_CTL 0x00060000 /* Arbiter lockout control mask */ -#define AR5K_DCU_MISC_ARBLOCK_CTL_S 17 -#define AR5K_DCU_MISC_ARBLOCK_CTL_NONE 0 /* No arbiter lockout */ -#define AR5K_DCU_MISC_ARBLOCK_CTL_INTFRM 1 /* Intra-frame lockout */ -#define AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL 2 /* Global lockout */ -#define AR5K_DCU_MISC_ARBLOCK_IGNORE 0x00080000 /* Ignore Arbiter lockout */ -#define AR5K_DCU_MISC_SEQ_NUM_INCR_DIS 0x00100000 /* Disable sequence number increment */ -#define AR5K_DCU_MISC_POST_FR_BKOFF_DIS 0x00200000 /* Disable post-frame backoff */ -#define AR5K_DCU_MISC_VIRT_COLL_POLICY 0x00400000 /* Virtual Collision cw policy */ -#define AR5K_DCU_MISC_BLOWN_IFS_POLICY 0x00800000 /* Blown IFS policy (?) */ -#define AR5K_DCU_MISC_SEQNUM_CTL 0x01000000 /* Sequence number control (?) */ -#define AR5K_QUEUE_DFS_MISC(_q) AR5K_QUEUE_REG(AR5K_DCU_MISC_BASE, _q) - -/* - * DCU frame sequence number registers - */ -#define AR5K_DCU_SEQNUM_BASE 0x1140 -#define AR5K_DCU_SEQNUM_M 0x00000fff -#define AR5K_QUEUE_DFS_SEQNUM(_q) AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q) - -/* - * DCU global IFS SIFS register - */ -#define AR5K_DCU_GBL_IFS_SIFS 0x1030 -#define AR5K_DCU_GBL_IFS_SIFS_M 0x0000ffff - -/* - * DCU global IFS slot interval register - */ -#define AR5K_DCU_GBL_IFS_SLOT 0x1070 -#define AR5K_DCU_GBL_IFS_SLOT_M 0x0000ffff - -/* - * DCU global IFS EIFS register - */ -#define AR5K_DCU_GBL_IFS_EIFS 0x10b0 -#define AR5K_DCU_GBL_IFS_EIFS_M 0x0000ffff - -/* - * DCU global IFS misc register - * - * LFSR stands for Linear Feedback Shift Register - * and it's used for generating pseudo-random - * number sequences. - * - * (If i understand corectly, random numbers are - * used for idle sensing -multiplied with cwmin/max etc-) - */ -#define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */ -#define AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE 0x00000007 /* LFSR Slice Select */ -#define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode */ -#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask */ -#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 /* USEC Duration mask */ -#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S 10 -#define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 /* DCU Arbiter delay mask */ -#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFS cnt reset policy (?) */ -#define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST 0x00800000 /* AIFS cnt reset policy (?) */ -#define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS 0x01000000 /* Disable random LFSR slice */ - -/* - * DCU frame prefetch control register - */ -#define AR5K_DCU_FP 0x1230 /* Register Address */ -#define AR5K_DCU_FP_NOBURST_DCU_EN 0x00000001 /* Enable non-burst prefetch on DCU (?) */ -#define AR5K_DCU_FP_NOBURST_EN 0x00000010 /* Enable non-burst prefetch (?) */ -#define AR5K_DCU_FP_BURST_DCU_EN 0x00000020 /* Enable burst prefetch on DCU (?) */ - -/* - * DCU transmit pause control/status register - */ -#define AR5K_DCU_TXP 0x1270 /* Register Address */ -#define AR5K_DCU_TXP_M 0x000003ff /* Tx pause mask */ -#define AR5K_DCU_TXP_STATUS 0x00010000 /* Tx pause status */ - -/* - * DCU transmit filter table 0 (32 entries) - */ -#define AR5K_DCU_TX_FILTER_0_BASE 0x1038 -#define AR5K_DCU_TX_FILTER_0(_n) (AR5K_DCU_TX_FILTER_0_BASE + (_n * 64)) - -/* - * DCU transmit filter table 1 (16 entries) - */ -#define AR5K_DCU_TX_FILTER_1_BASE 0x103c -#define AR5K_DCU_TX_FILTER_1(_n) (AR5K_DCU_TX_FILTER_1_BASE + ((_n - 32) * 64)) - -/* - * DCU clear transmit filter register - */ -#define AR5K_DCU_TX_FILTER_CLR 0x143c - -/* - * DCU set transmit filter register - */ -#define AR5K_DCU_TX_FILTER_SET 0x147c - -/* - * Reset control register - */ -#define AR5K_RESET_CTL 0x4000 /* Register Address */ -#define AR5K_RESET_CTL_PCU 0x00000001 /* Protocol Control Unit reset */ -#define AR5K_RESET_CTL_DMA 0x00000002 /* DMA (Rx/Tx) reset [5210] */ -#define AR5K_RESET_CTL_BASEBAND 0x00000002 /* Baseband reset [5211+] */ -#define AR5K_RESET_CTL_MAC 0x00000004 /* MAC reset (PCU+Baseband ?) [5210] */ -#define AR5K_RESET_CTL_PHY 0x00000008 /* PHY reset [5210] */ -#define AR5K_RESET_CTL_PCI 0x00000010 /* PCI Core reset (interrupts etc) */ - -/* - * Sleep control register - */ -#define AR5K_SLEEP_CTL 0x4004 /* Register Address */ -#define AR5K_SLEEP_CTL_SLDUR 0x0000ffff /* Sleep duration mask */ -#define AR5K_SLEEP_CTL_SLDUR_S 0 -#define AR5K_SLEEP_CTL_SLE 0x00030000 /* Sleep enable mask */ -#define AR5K_SLEEP_CTL_SLE_S 16 -#define AR5K_SLEEP_CTL_SLE_WAKE 0x00000000 /* Force chip awake */ -#define AR5K_SLEEP_CTL_SLE_SLP 0x00010000 /* Force chip sleep */ -#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 /* Normal sleep policy */ -#define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* [5211+] */ -#define AR5K_SLEEP_CTL_DUR_TIM_POL 0x00040000 /* Sleep duration timing policy */ -#define AR5K_SLEEP_CTL_DUR_WRITE_POL 0x00080000 /* Sleep duration write policy */ -#define AR5K_SLEEP_CTL_SLE_POL 0x00100000 /* Sleep policy mode */ - -/* - * Interrupt pending register - */ -#define AR5K_INTPEND 0x4008 -#define AR5K_INTPEND_M 0x00000001 - -/* - * Sleep force register - */ -#define AR5K_SFR 0x400c -#define AR5K_SFR_EN 0x00000001 - -/* - * PCI configuration register - * TODO: Fix LED stuff - */ -#define AR5K_PCICFG 0x4010 /* Register Address */ -#define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */ -#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock */ -#define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */ -#define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */ -#define AR5K_PCICFG_EESIZE_S 3 -#define AR5K_PCICFG_EESIZE_4K 0 /* 4K */ -#define AR5K_PCICFG_EESIZE_8K 1 /* 8K */ -#define AR5K_PCICFG_EESIZE_16K 2 /* 16K */ -#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size [5211+] */ -#define AR5K_PCICFG_LED 0x00000060 /* Led status [5211+] */ -#define AR5K_PCICFG_LED_NONE 0x00000000 /* Default [5211+] */ -#define AR5K_PCICFG_LED_PEND 0x00000020 /* Scan / Auth pending */ -#define AR5K_PCICFG_LED_ASSOC 0x00000040 /* Associated */ -#define AR5K_PCICFG_BUS_SEL 0x00000380 /* Mask for "bus select" [5211+] (?) */ -#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix */ -#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */ -#define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */ -#define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */ -#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts*/ -#define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */ -#define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */ -#define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */ -#define AR5K_PCICFG_LEDMODE_PROM 0x00020000 /* Default mode (blink on any traffic) [5211+] */ -#define AR5K_PCICFG_LEDMODE_PWR 0x00040000 /* Some other blinking mode (?) [5211+] */ -#define AR5K_PCICFG_LEDMODE_RAND 0x00060000 /* Random blinking (?) [5211+] */ -#define AR5K_PCICFG_LEDBLINK 0x00700000 /* Led blink rate */ -#define AR5K_PCICFG_LEDBLINK_S 20 -#define AR5K_PCICFG_LEDSLOW 0x00800000 /* Slowest led blink rate [5211+] */ -#define AR5K_PCICFG_LEDSTATE \ - (AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE | \ - AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW) -#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate */ -#define AR5K_PCICFG_SLEEP_CLOCK_RATE_S 24 - -/* - * "General Purpose Input/Output" (GPIO) control register - * - * I'm not sure about this but after looking at the code - * for all chipsets here is what i got. - * - * We have 6 GPIOs (pins), each GPIO has 4 modes (2 bits) - * Mode 0 -> always input - * Mode 1 -> output when GPIODO for this GPIO is set to 0 - * Mode 2 -> output when GPIODO for this GPIO is set to 1 - * Mode 3 -> always output - * - * For more infos check out get_gpio/set_gpio and - * set_gpio_input/set_gpio_output functs. - * For more infos on gpio interrupt check out set_gpio_intr. - */ -#define AR5K_NUM_GPIO 6 - -#define AR5K_GPIOCR 0x4014 /* Register Address */ -#define AR5K_GPIOCR_INT_ENA 0x00008000 /* Enable GPIO interrupt */ -#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is low */ -#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is high */ -#define AR5K_GPIOCR_IN(n) (0 << ((n) * 2)) /* Mode 0 for pin n */ -#define AR5K_GPIOCR_OUT0(n) (1 << ((n) * 2)) /* Mode 1 for pin n */ -#define AR5K_GPIOCR_OUT1(n) (2 << ((n) * 2)) /* Mode 2 for pin n */ -#define AR5K_GPIOCR_OUT(n) (3 << ((n) * 2)) /* Mode 3 for pin n */ -#define AR5K_GPIOCR_INT_SEL(n) ((n) << 12) /* Interrupt for GPIO pin n */ - -/* - * "General Purpose Input/Output" (GPIO) data output register - */ -#define AR5K_GPIODO 0x4018 - -/* - * "General Purpose Input/Output" (GPIO) data input register - */ -#define AR5K_GPIODI 0x401c -#define AR5K_GPIODI_M 0x0000002f - -/* - * Silicon revision register - */ -#define AR5K_SREV 0x4020 /* Register Address */ -#define AR5K_SREV_REV 0x0000000f /* Mask for revision */ -#define AR5K_SREV_REV_S 0 -#define AR5K_SREV_VER 0x000000ff /* Mask for version */ -#define AR5K_SREV_VER_S 4 - -/* - * TXE write posting register - */ -#define AR5K_TXEPOST 0x4028 - -/* - * QCU sleep mask - */ -#define AR5K_QCU_SLEEP_MASK 0x402c - -/* 0x4068 is compression buffer configuration - * register on 5414 and pm configuration register - * on 5424 and newer pci-e chips. */ - -/* - * Compression buffer configuration - * register (enable/disable) [5414] - */ -#define AR5K_5414_CBCFG 0x4068 -#define AR5K_5414_CBCFG_BUF_DIS 0x10 /* Disable buffer */ - -/* - * PCI-E Power managment configuration - * and status register [5424+] - */ -#define AR5K_PCIE_PM_CTL 0x4068 /* Register address */ -/* Only 5424 */ -#define AR5K_PCIE_PM_CTL_L1_WHEN_D2 0x00000001 /* enable PCIe core enter L1 - when d2_sleep_en is asserted */ -#define AR5K_PCIE_PM_CTL_L0_L0S_CLEAR 0x00000002 /* Clear L0 and L0S counters */ -#define AR5K_PCIE_PM_CTL_L0_L0S_EN 0x00000004 /* Start L0 nd L0S counters */ -#define AR5K_PCIE_PM_CTL_LDRESET_EN 0x00000008 /* Enable reset when link goes - down */ -/* Wake On Wireless */ -#define AR5K_PCIE_PM_CTL_PME_EN 0x00000010 /* PME Enable */ -#define AR5K_PCIE_PM_CTL_AUX_PWR_DET 0x00000020 /* Aux power detect */ -#define AR5K_PCIE_PM_CTL_PME_CLEAR 0x00000040 /* Clear PME */ -#define AR5K_PCIE_PM_CTL_PSM_D0 0x00000080 -#define AR5K_PCIE_PM_CTL_PSM_D1 0x00000100 -#define AR5K_PCIE_PM_CTL_PSM_D2 0x00000200 -#define AR5K_PCIE_PM_CTL_PSM_D3 0x00000400 - -/* - * PCI-E Workaround enable register - */ -#define AR5K_PCIE_WAEN 0x407c - -/* - * PCI-E Serializer/Desirializer - * registers - */ -#define AR5K_PCIE_SERDES 0x4080 -#define AR5K_PCIE_SERDES_RESET 0x4084 - -/*====EEPROM REGISTERS====*/ - -/* - * EEPROM access registers - * - * Here we got a difference between 5210/5211-12 - * read data register for 5210 is at 0x6800 and - * status register is at 0x6c00. There is also - * no eeprom command register on 5210 and the - * offsets are different. - * - * To read eeprom data for a specific offset: - * 5210 - enable eeprom access (AR5K_PCICFG_EEAE) - * read AR5K_EEPROM_BASE +(4 * offset) - * check the eeprom status register - * and read eeprom data register. - * - * 5211 - write offset to AR5K_EEPROM_BASE - * 5212 write AR5K_EEPROM_CMD_READ on AR5K_EEPROM_CMD - * check the eeprom status register - * and read eeprom data register. - * - * To write eeprom data for a specific offset: - * 5210 - enable eeprom access (AR5K_PCICFG_EEAE) - * write data to AR5K_EEPROM_BASE +(4 * offset) - * check the eeprom status register - * 5211 - write AR5K_EEPROM_CMD_RESET on AR5K_EEPROM_CMD - * 5212 write offset to AR5K_EEPROM_BASE - * write data to data register - * write AR5K_EEPROM_CMD_WRITE on AR5K_EEPROM_CMD - * check the eeprom status register - * - * For more infos check eeprom_* functs and the ar5k.c - * file posted in madwifi-devel mailing list. - * http://sourceforge.net/mailarchive/message.php?msg_id=8966525 - * - */ -#define AR5K_EEPROM_BASE 0x6000 - -/* - * EEPROM data register - */ -#define AR5K_EEPROM_DATA_5211 0x6004 -#define AR5K_EEPROM_DATA_5210 0x6800 -#define AR5K_EEPROM_DATA (ah->ah_version == AR5K_AR5210 ? \ - AR5K_EEPROM_DATA_5210 : AR5K_EEPROM_DATA_5211) - -/* - * EEPROM command register - */ -#define AR5K_EEPROM_CMD 0x6008 /* Register Addres */ -#define AR5K_EEPROM_CMD_READ 0x00000001 /* EEPROM read */ -#define AR5K_EEPROM_CMD_WRITE 0x00000002 /* EEPROM write */ -#define AR5K_EEPROM_CMD_RESET 0x00000004 /* EEPROM reset */ - -/* - * EEPROM status register - */ -#define AR5K_EEPROM_STAT_5210 0x6c00 /* Register Address [5210] */ -#define AR5K_EEPROM_STAT_5211 0x600c /* Register Address [5211+] */ -#define AR5K_EEPROM_STATUS (ah->ah_version == AR5K_AR5210 ? \ - AR5K_EEPROM_STAT_5210 : AR5K_EEPROM_STAT_5211) -#define AR5K_EEPROM_STAT_RDERR 0x00000001 /* EEPROM read failed */ -#define AR5K_EEPROM_STAT_RDDONE 0x00000002 /* EEPROM read successful */ -#define AR5K_EEPROM_STAT_WRERR 0x00000004 /* EEPROM write failed */ -#define AR5K_EEPROM_STAT_WRDONE 0x00000008 /* EEPROM write successful */ - -/* - * EEPROM config register - */ -#define AR5K_EEPROM_CFG 0x6010 /* Register Addres */ -#define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */ -#define AR5K_EEPROM_CFG_SIZE_AUTO 0 -#define AR5K_EEPROM_CFG_SIZE_4KBIT 1 -#define AR5K_EEPROM_CFG_SIZE_8KBIT 2 -#define AR5K_EEPROM_CFG_SIZE_16KBIT 3 -#define AR5K_EEPROM_CFG_WR_WAIT_DIS 0x00000004 /* Disable write wait */ -#define AR5K_EEPROM_CFG_CLK_RATE 0x00000018 /* Clock rate */ -#define AR5K_EEPROM_CFG_CLK_RATE_S 3 -#define AR5K_EEPROM_CFG_CLK_RATE_156KHZ 0 -#define AR5K_EEPROM_CFG_CLK_RATE_312KHZ 1 -#define AR5K_EEPROM_CFG_CLK_RATE_625KHZ 2 -#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protection key */ -#define AR5K_EEPROM_CFG_PROT_KEY_S 8 -#define AR5K_EEPROM_CFG_LIND_EN 0x01000000 /* Enable length indicator (?) */ - - -/* - * TODO: Wake On Wireless registers - * Range 0x7000 - 0x7ce0 - */ - -/* - * Protocol Control Unit (PCU) registers - */ -/* - * Used for checking initial register writes - * during channel reset (see reset func) - */ -#define AR5K_PCU_MIN 0x8000 -#define AR5K_PCU_MAX 0x8fff - -/* - * First station id register (Lower 32 bits of MAC address) - */ -#define AR5K_STA_ID0 0x8000 -#define AR5K_STA_ID0_ARRD_L32 0xffffffff - -/* - * Second station id register (Upper 16 bits of MAC address + PCU settings) - */ -#define AR5K_STA_ID1 0x8004 /* Register Address */ -#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC addres */ -#define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */ -#define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */ -#define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting */ -#define AR5K_STA_ID1_NO_KEYSRCH 0x00080000 /* No key search */ -#define AR5K_STA_ID1_NO_PSPOLL 0x00100000 /* No power save polling [5210] */ -#define AR5K_STA_ID1_PCF_5211 0x00100000 /* Enable PCF on [5211+] */ -#define AR5K_STA_ID1_PCF_5210 0x00200000 /* Enable PCF on [5210]*/ -#define AR5K_STA_ID1_PCF (ah->ah_version == AR5K_AR5210 ? \ - AR5K_STA_ID1_PCF_5210 : AR5K_STA_ID1_PCF_5211) -#define AR5K_STA_ID1_DEFAULT_ANTENNA 0x00200000 /* Use default antenna */ -#define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */ -#define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */ -#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mbit/s for ACK/CTS */ -#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate for ACK/CTS [5211+] */ -#define AR5K_STA_ID1_SELFGEN_DEF_ANT 0x04000000 /* Use def. antenna for self generated frames */ -#define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */ -#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Look up key when key id != 0 */ -#define AR5K_STA_ID1_PRESERVE_SEQ_NUM 0x20000000 /* Preserve sequence number */ -#define AR5K_STA_ID1_CBCIV_ENDIAN 0x40000000 /* ??? */ -#define AR5K_STA_ID1_KEYSRCH_MCAST 0x80000000 /* Do key cache search for mcast frames */ - -/* - * First BSSID register (MAC address, lower 32bits) - */ -#define AR5K_BSS_ID0 0x8008 - -/* - * Second BSSID register (MAC address in upper 16 bits) - * - * AID: Association ID - */ -#define AR5K_BSS_ID1 0x800c -#define AR5K_BSS_ID1_AID 0xffff0000 -#define AR5K_BSS_ID1_AID_S 16 - -/* - * Backoff slot time register - */ -#define AR5K_SLOT_TIME 0x8010 - -/* - * ACK/CTS timeout register - */ -#define AR5K_TIME_OUT 0x8014 /* Register Address */ -#define AR5K_TIME_OUT_ACK 0x00001fff /* ACK timeout mask */ -#define AR5K_TIME_OUT_ACK_S 0 -#define AR5K_TIME_OUT_CTS 0x1fff0000 /* CTS timeout mask */ -#define AR5K_TIME_OUT_CTS_S 16 - -/* - * RSSI threshold register - */ -#define AR5K_RSSI_THR 0x8018 /* Register Address */ -#define AR5K_RSSI_THR_M 0x000000ff /* Mask for RSSI threshold [5211+] */ -#define AR5K_RSSI_THR_BMISS_5210 0x00000700 /* Mask for Beacon Missed threshold [5210] */ -#define AR5K_RSSI_THR_BMISS_5210_S 8 -#define AR5K_RSSI_THR_BMISS_5211 0x0000ff00 /* Mask for Beacon Missed threshold [5211+] */ -#define AR5K_RSSI_THR_BMISS_5211_S 8 -#define AR5K_RSSI_THR_BMISS (ah->ah_version == AR5K_AR5210 ? \ - AR5K_RSSI_THR_BMISS_5210 : AR5K_RSSI_THR_BMISS_5211) -#define AR5K_RSSI_THR_BMISS_S 8 - -/* - * 5210 has more PCU registers because there is no QCU/DCU - * so queue parameters are set here, this way a lot common - * registers have different address for 5210. To make things - * easier we define a macro based on ah->ah_version for common - * registers with different addresses and common flags. - */ - -/* - * Retry limit register - * - * Retry limit register for 5210 (no QCU/DCU so it's done in PCU) - */ -#define AR5K_NODCU_RETRY_LMT 0x801c /* Register Address */ -#define AR5K_NODCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */ -#define AR5K_NODCU_RETRY_LMT_SH_RETRY_S 0 -#define AR5K_NODCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry mask */ -#define AR5K_NODCU_RETRY_LMT_LG_RETRY_S 4 -#define AR5K_NODCU_RETRY_LMT_SSH_RETRY 0x00003f00 /* Station short retry limit mask */ -#define AR5K_NODCU_RETRY_LMT_SSH_RETRY_S 8 -#define AR5K_NODCU_RETRY_LMT_SLG_RETRY 0x000fc000 /* Station long retry limit mask */ -#define AR5K_NODCU_RETRY_LMT_SLG_RETRY_S 14 -#define AR5K_NODCU_RETRY_LMT_CW_MIN 0x3ff00000 /* Minimum contention window mask */ -#define AR5K_NODCU_RETRY_LMT_CW_MIN_S 20 - -/* - * Transmit latency register - */ -#define AR5K_USEC_5210 0x8020 /* Register Address [5210] */ -#define AR5K_USEC_5211 0x801c /* Register Address [5211+] */ -#define AR5K_USEC (ah->ah_version == AR5K_AR5210 ? \ - AR5K_USEC_5210 : AR5K_USEC_5211) -#define AR5K_USEC_1 0x0000007f /* clock cycles for 1us */ -#define AR5K_USEC_1_S 0 -#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32Mhz clock */ -#define AR5K_USEC_32_S 7 -#define AR5K_USEC_TX_LATENCY_5211 0x007fc000 -#define AR5K_USEC_TX_LATENCY_5211_S 14 -#define AR5K_USEC_RX_LATENCY_5211 0x1f800000 -#define AR5K_USEC_RX_LATENCY_5211_S 23 -#define AR5K_USEC_TX_LATENCY_5210 0x000fc000 /* also for 5311 */ -#define AR5K_USEC_TX_LATENCY_5210_S 14 -#define AR5K_USEC_RX_LATENCY_5210 0x03f00000 /* also for 5311 */ -#define AR5K_USEC_RX_LATENCY_5210_S 20 - -/* - * PCU beacon control register - */ -#define AR5K_BEACON_5210 0x8024 /*Register Address [5210] */ -#define AR5K_BEACON_5211 0x8020 /*Register Address [5211+] */ -#define AR5K_BEACON (ah->ah_version == AR5K_AR5210 ? \ - AR5K_BEACON_5210 : AR5K_BEACON_5211) -#define AR5K_BEACON_PERIOD 0x0000ffff /* Mask for beacon period */ -#define AR5K_BEACON_PERIOD_S 0 -#define AR5K_BEACON_TIM 0x007f0000 /* Mask for TIM offset */ -#define AR5K_BEACON_TIM_S 16 -#define AR5K_BEACON_ENABLE 0x00800000 /* Enable beacons */ -#define AR5K_BEACON_RESET_TSF 0x01000000 /* Force TSF reset */ - -/* - * CFP period register - */ -#define AR5K_CFP_PERIOD_5210 0x8028 -#define AR5K_CFP_PERIOD_5211 0x8024 -#define AR5K_CFP_PERIOD (ah->ah_version == AR5K_AR5210 ? \ - AR5K_CFP_PERIOD_5210 : AR5K_CFP_PERIOD_5211) - -/* - * Next beacon time register - */ -#define AR5K_TIMER0_5210 0x802c -#define AR5K_TIMER0_5211 0x8028 -#define AR5K_TIMER0 (ah->ah_version == AR5K_AR5210 ? \ - AR5K_TIMER0_5210 : AR5K_TIMER0_5211) - -/* - * Next DMA beacon alert register - */ -#define AR5K_TIMER1_5210 0x8030 -#define AR5K_TIMER1_5211 0x802c -#define AR5K_TIMER1 (ah->ah_version == AR5K_AR5210 ? \ - AR5K_TIMER1_5210 : AR5K_TIMER1_5211) - -/* - * Next software beacon alert register - */ -#define AR5K_TIMER2_5210 0x8034 -#define AR5K_TIMER2_5211 0x8030 -#define AR5K_TIMER2 (ah->ah_version == AR5K_AR5210 ? \ - AR5K_TIMER2_5210 : AR5K_TIMER2_5211) - -/* - * Next ATIM window time register - */ -#define AR5K_TIMER3_5210 0x8038 -#define AR5K_TIMER3_5211 0x8034 -#define AR5K_TIMER3 (ah->ah_version == AR5K_AR5210 ? \ - AR5K_TIMER3_5210 : AR5K_TIMER3_5211) - - -/* - * 5210 First inter frame spacing register (IFS) - */ -#define AR5K_IFS0 0x8040 -#define AR5K_IFS0_SIFS 0x000007ff -#define AR5K_IFS0_SIFS_S 0 -#define AR5K_IFS0_DIFS 0x007ff800 -#define AR5K_IFS0_DIFS_S 11 - -/* - * 5210 Second inter frame spacing register (IFS) - */ -#define AR5K_IFS1 0x8044 -#define AR5K_IFS1_PIFS 0x00000fff -#define AR5K_IFS1_PIFS_S 0 -#define AR5K_IFS1_EIFS 0x03fff000 -#define AR5K_IFS1_EIFS_S 12 -#define AR5K_IFS1_CS_EN 0x04000000 - - -/* - * CFP duration register - */ -#define AR5K_CFP_DUR_5210 0x8048 -#define AR5K_CFP_DUR_5211 0x8038 -#define AR5K_CFP_DUR (ah->ah_version == AR5K_AR5210 ? \ - AR5K_CFP_DUR_5210 : AR5K_CFP_DUR_5211) - -/* - * Receive filter register - */ -#define AR5K_RX_FILTER_5210 0x804c /* Register Address [5210] */ -#define AR5K_RX_FILTER_5211 0x803c /* Register Address [5211+] */ -#define AR5K_RX_FILTER (ah->ah_version == AR5K_AR5210 ? \ - AR5K_RX_FILTER_5210 : AR5K_RX_FILTER_5211) -#define AR5K_RX_FILTER_UCAST 0x00000001 /* Don't filter unicast frames */ -#define AR5K_RX_FILTER_MCAST 0x00000002 /* Don't filter multicast frames */ -#define AR5K_RX_FILTER_BCAST 0x00000004 /* Don't filter broadcast frames */ -#define AR5K_RX_FILTER_CONTROL 0x00000008 /* Don't filter control frames */ -#define AR5K_RX_FILTER_BEACON 0x00000010 /* Don't filter beacon frames */ -#define AR5K_RX_FILTER_PROM 0x00000020 /* Set promiscuous mode */ -#define AR5K_RX_FILTER_XRPOLL 0x00000040 /* Don't filter XR poll frame [5212+] */ -#define AR5K_RX_FILTER_PROBEREQ 0x00000080 /* Don't filter probe requests [5212+] */ -#define AR5K_RX_FILTER_PHYERR_5212 0x00000100 /* Don't filter phy errors [5212+] */ -#define AR5K_RX_FILTER_RADARERR_5212 0x00000200 /* Don't filter phy radar errors [5212+] */ -#define AR5K_RX_FILTER_PHYERR_5211 0x00000040 /* [5211] */ -#define AR5K_RX_FILTER_RADARERR_5211 0x00000080 /* [5211] */ -#define AR5K_RX_FILTER_PHYERR \ - ((ah->ah_version == AR5K_AR5211 ? \ - AR5K_RX_FILTER_PHYERR_5211 : AR5K_RX_FILTER_PHYERR_5212)) -#define AR5K_RX_FILTER_RADARERR \ - ((ah->ah_version == AR5K_AR5211 ? \ - AR5K_RX_FILTER_RADARERR_5211 : AR5K_RX_FILTER_RADARERR_5212)) - -/* - * Multicast filter register (lower 32 bits) - */ -#define AR5K_MCAST_FILTER0_5210 0x8050 -#define AR5K_MCAST_FILTER0_5211 0x8040 -#define AR5K_MCAST_FILTER0 (ah->ah_version == AR5K_AR5210 ? \ - AR5K_MCAST_FILTER0_5210 : AR5K_MCAST_FILTER0_5211) - -/* - * Multicast filter register (higher 16 bits) - */ -#define AR5K_MCAST_FILTER1_5210 0x8054 -#define AR5K_MCAST_FILTER1_5211 0x8044 -#define AR5K_MCAST_FILTER1 (ah->ah_version == AR5K_AR5210 ? \ - AR5K_MCAST_FILTER1_5210 : AR5K_MCAST_FILTER1_5211) - - -/* - * Transmit mask register (lower 32 bits) [5210] - */ -#define AR5K_TX_MASK0 0x8058 - -/* - * Transmit mask register (higher 16 bits) [5210] - */ -#define AR5K_TX_MASK1 0x805c - -/* - * Clear transmit mask [5210] - */ -#define AR5K_CLR_TMASK 0x8060 - -/* - * Trigger level register (before transmission) [5210] - */ -#define AR5K_TRIG_LVL 0x8064 - - -/* - * PCU control register - * - * Only DIS_RX is used in the code, the rest i guess are - * for tweaking/diagnostics. - */ -#define AR5K_DIAG_SW_5210 0x8068 /* Register Address [5210] */ -#define AR5K_DIAG_SW_5211 0x8048 /* Register Address [5211+] */ -#define AR5K_DIAG_SW (ah->ah_version == AR5K_AR5210 ? \ - AR5K_DIAG_SW_5210 : AR5K_DIAG_SW_5211) -#define AR5K_DIAG_SW_DIS_WEP_ACK 0x00000001 /* Disable ACKs if WEP key is invalid */ -#define AR5K_DIAG_SW_DIS_ACK 0x00000002 /* Disable ACKs */ -#define AR5K_DIAG_SW_DIS_CTS 0x00000004 /* Disable CTSs */ -#define AR5K_DIAG_SW_DIS_ENC 0x00000008 /* Disable encryption */ -#define AR5K_DIAG_SW_DIS_DEC 0x00000010 /* Disable decryption */ -#define AR5K_DIAG_SW_DIS_TX 0x00000020 /* Disable transmit [5210] */ -#define AR5K_DIAG_SW_DIS_RX_5210 0x00000040 /* Disable recieve */ -#define AR5K_DIAG_SW_DIS_RX_5211 0x00000020 -#define AR5K_DIAG_SW_DIS_RX (ah->ah_version == AR5K_AR5210 ? \ - AR5K_DIAG_SW_DIS_RX_5210 : AR5K_DIAG_SW_DIS_RX_5211) -#define AR5K_DIAG_SW_LOOP_BACK_5210 0x00000080 /* Loopback (i guess it goes with DIS_TX) [5210] */ -#define AR5K_DIAG_SW_LOOP_BACK_5211 0x00000040 -#define AR5K_DIAG_SW_LOOP_BACK (ah->ah_version == AR5K_AR5210 ? \ - AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211) -#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 /* Corrupted FCS */ -#define AR5K_DIAG_SW_CORR_FCS_5211 0x00000080 -#define AR5K_DIAG_SW_CORR_FCS (ah->ah_version == AR5K_AR5210 ? \ - AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211) -#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 /* Dump channel info */ -#define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100 -#define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \ - AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211) -#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 /* Enable fixed scrambler seed */ -#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 -#define AR5K_DIAG_SW_EN_SCRAM_SEED (ah->ah_version == AR5K_AR5210 ? \ - AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211) -#define AR5K_DIAG_SW_ECO_ENABLE 0x00000400 /* [5211+] */ -#define AR5K_DIAG_SW_SCVRAM_SEED 0x0003f800 /* [5210] */ -#define AR5K_DIAG_SW_SCRAM_SEED_M 0x0001fc00 /* Scrambler seed mask */ -#define AR5K_DIAG_SW_SCRAM_SEED_S 10 -#define AR5K_DIAG_SW_DIS_SEQ_INC 0x00040000 /* Disable seqnum increment (?)[5210] */ -#define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000 -#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 /* Accept frames of non-zero protocol number */ -#define AR5K_DIAG_SW_FRAME_NV0 (ah->ah_version == AR5K_AR5210 ? \ - AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211) -#define AR5K_DIAG_SW_OBSPT_M 0x000c0000 /* Observation point select (?) */ -#define AR5K_DIAG_SW_OBSPT_S 18 -#define AR5K_DIAG_SW_RX_CLEAR_HIGH 0x0010000 /* Force RX Clear high */ -#define AR5K_DIAG_SW_IGNORE_CARR_SENSE 0x0020000 /* Ignore virtual carrier sense */ -#define AR5K_DIAG_SW_CHANEL_IDLE_HIGH 0x0040000 /* Force channel idle high */ -#define AR5K_DIAG_SW_PHEAR_ME 0x0080000 /* ??? */ - -/* - * TSF (clock) register (lower 32 bits) - */ -#define AR5K_TSF_L32_5210 0x806c -#define AR5K_TSF_L32_5211 0x804c -#define AR5K_TSF_L32 (ah->ah_version == AR5K_AR5210 ? \ - AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211) - -/* - * TSF (clock) register (higher 32 bits) - */ -#define AR5K_TSF_U32_5210 0x8070 -#define AR5K_TSF_U32_5211 0x8050 -#define AR5K_TSF_U32 (ah->ah_version == AR5K_AR5210 ? \ - AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211) - -/* - * Last beacon timestamp register - */ -#define AR5K_LAST_TSTP 0x8080 - -/* - * ADDAC test register [5211+] - */ -#define AR5K_ADDAC_TEST 0x8054 /* Register Address */ -#define AR5K_ADDAC_TEST_TXCONT 0x00000001 /* Test continuous tx */ -#define AR5K_ADDAC_TEST_TST_MODE 0x00000002 /* Test mode */ -#define AR5K_ADDAC_TEST_LOOP_EN 0x00000004 /* Enable loop */ -#define AR5K_ADDAC_TEST_LOOP_LEN 0x00000008 /* Loop length (field) */ -#define AR5K_ADDAC_TEST_USE_U8 0x00004000 /* Use upper 8 bits */ -#define AR5K_ADDAC_TEST_MSB 0x00008000 /* State of MSB */ -#define AR5K_ADDAC_TEST_TRIG_SEL 0x00010000 /* Trigger select */ -#define AR5K_ADDAC_TEST_TRIG_PTY 0x00020000 /* Trigger polarity */ -#define AR5K_ADDAC_TEST_RXCONT 0x00040000 /* Continuous capture */ -#define AR5K_ADDAC_TEST_CAPTURE 0x00080000 /* Begin capture */ -#define AR5K_ADDAC_TEST_TST_ARM 0x00100000 /* Test ARM (Adaptive Radio Mode ?) */ - -/* - * Default antenna register [5211+] - */ -#define AR5K_DEFAULT_ANTENNA 0x8058 - -/* - * Frame control QoS mask register (?) [5211+] - * (FC_QOS_MASK) - */ -#define AR5K_FRAME_CTL_QOSM 0x805c - -/* - * Seq mask register (?) [5211+] - */ -#define AR5K_SEQ_MASK 0x8060 - -/* - * Retry count register [5210] - */ -#define AR5K_RETRY_CNT 0x8084 /* Register Address [5210] */ -#define AR5K_RETRY_CNT_SSH 0x0000003f /* Station short retry count (?) */ -#define AR5K_RETRY_CNT_SLG 0x00000fc0 /* Station long retry count (?) */ - -/* - * Back-off status register [5210] - */ -#define AR5K_BACKOFF 0x8088 /* Register Address [5210] */ -#define AR5K_BACKOFF_CW 0x000003ff /* Backoff Contention Window (?) */ -#define AR5K_BACKOFF_CNT 0x03ff0000 /* Backoff count (?) */ - - - -/* - * NAV register (current) - */ -#define AR5K_NAV_5210 0x808c -#define AR5K_NAV_5211 0x8084 -#define AR5K_NAV (ah->ah_version == AR5K_AR5210 ? \ - AR5K_NAV_5210 : AR5K_NAV_5211) - -/* - * RTS success register - */ -#define AR5K_RTS_OK_5210 0x8090 -#define AR5K_RTS_OK_5211 0x8088 -#define AR5K_RTS_OK (ah->ah_version == AR5K_AR5210 ? \ - AR5K_RTS_OK_5210 : AR5K_RTS_OK_5211) - -/* - * RTS failure register - */ -#define AR5K_RTS_FAIL_5210 0x8094 -#define AR5K_RTS_FAIL_5211 0x808c -#define AR5K_RTS_FAIL (ah->ah_version == AR5K_AR5210 ? \ - AR5K_RTS_FAIL_5210 : AR5K_RTS_FAIL_5211) - -/* - * ACK failure register - */ -#define AR5K_ACK_FAIL_5210 0x8098 -#define AR5K_ACK_FAIL_5211 0x8090 -#define AR5K_ACK_FAIL (ah->ah_version == AR5K_AR5210 ? \ - AR5K_ACK_FAIL_5210 : AR5K_ACK_FAIL_5211) - -/* - * FCS failure register - */ -#define AR5K_FCS_FAIL_5210 0x809c -#define AR5K_FCS_FAIL_5211 0x8094 -#define AR5K_FCS_FAIL (ah->ah_version == AR5K_AR5210 ? \ - AR5K_FCS_FAIL_5210 : AR5K_FCS_FAIL_5211) - -/* - * Beacon count register - */ -#define AR5K_BEACON_CNT_5210 0x80a0 -#define AR5K_BEACON_CNT_5211 0x8098 -#define AR5K_BEACON_CNT (ah->ah_version == AR5K_AR5210 ? \ - AR5K_BEACON_CNT_5210 : AR5K_BEACON_CNT_5211) - - -/*===5212 Specific PCU registers===*/ - -/* - * XR (eXtended Range) mode register - */ -#define AR5K_XRMODE 0x80c0 /* Register Address */ -#define AR5K_XRMODE_POLL_TYPE_M 0x0000003f /* Mask for Poll type (?) */ -#define AR5K_XRMODE_POLL_TYPE_S 0 -#define AR5K_XRMODE_POLL_SUBTYPE_M 0x0000003c /* Mask for Poll subtype (?) */ -#define AR5K_XRMODE_POLL_SUBTYPE_S 2 -#define AR5K_XRMODE_POLL_WAIT_ALL 0x00000080 /* Wait for poll */ -#define AR5K_XRMODE_SIFS_DELAY 0x000fff00 /* Mask for SIFS delay */ -#define AR5K_XRMODE_FRAME_HOLD_M 0xfff00000 /* Mask for frame hold (?) */ -#define AR5K_XRMODE_FRAME_HOLD_S 20 - -/* - * XR delay register - */ -#define AR5K_XRDELAY 0x80c4 /* Register Address */ -#define AR5K_XRDELAY_SLOT_DELAY_M 0x0000ffff /* Mask for slot delay */ -#define AR5K_XRDELAY_SLOT_DELAY_S 0 -#define AR5K_XRDELAY_CHIRP_DELAY_M 0xffff0000 /* Mask for CHIRP data delay */ -#define AR5K_XRDELAY_CHIRP_DELAY_S 16 - -/* - * XR timeout register - */ -#define AR5K_XRTIMEOUT 0x80c8 /* Register Address */ -#define AR5K_XRTIMEOUT_CHIRP_M 0x0000ffff /* Mask for CHIRP timeout */ -#define AR5K_XRTIMEOUT_CHIRP_S 0 -#define AR5K_XRTIMEOUT_POLL_M 0xffff0000 /* Mask for Poll timeout */ -#define AR5K_XRTIMEOUT_POLL_S 16 - -/* - * XR chirp register - */ -#define AR5K_XRCHIRP 0x80cc /* Register Address */ -#define AR5K_XRCHIRP_SEND 0x00000001 /* Send CHIRP */ -#define AR5K_XRCHIRP_GAP 0xffff0000 /* Mask for CHIRP gap (?) */ - -/* - * XR stomp register - */ -#define AR5K_XRSTOMP 0x80d0 /* Register Address */ -#define AR5K_XRSTOMP_TX 0x00000001 /* Stomp Tx (?) */ -#define AR5K_XRSTOMP_RX 0x00000002 /* Stomp Rx (?) */ -#define AR5K_XRSTOMP_TX_RSSI 0x00000004 /* Stomp Tx RSSI (?) */ -#define AR5K_XRSTOMP_TX_BSSID 0x00000008 /* Stomp Tx BSSID (?) */ -#define AR5K_XRSTOMP_DATA 0x00000010 /* Stomp data (?)*/ -#define AR5K_XRSTOMP_RSSI_THRES 0x0000ff00 /* Mask for XR RSSI threshold */ - -/* - * First enhanced sleep register - */ -#define AR5K_SLEEP0 0x80d4 /* Register Address */ -#define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff /* Mask for next DTIM (?) */ -#define AR5K_SLEEP0_NEXT_DTIM_S 0 -#define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 /* Assume DTIM */ -#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enchanced sleep control */ -#define AR5K_SLEEP0_CABTO 0xff000000 /* Mask for CAB Time Out */ -#define AR5K_SLEEP0_CABTO_S 24 - -/* - * Second enhanced sleep register - */ -#define AR5K_SLEEP1 0x80d8 /* Register Address */ -#define AR5K_SLEEP1_NEXT_TIM 0x0007ffff /* Mask for next TIM (?) */ -#define AR5K_SLEEP1_NEXT_TIM_S 0 -#define AR5K_SLEEP1_BEACON_TO 0xff000000 /* Mask for Beacon Time Out */ -#define AR5K_SLEEP1_BEACON_TO_S 24 - -/* - * Third enhanced sleep register - */ -#define AR5K_SLEEP2 0x80dc /* Register Address */ -#define AR5K_SLEEP2_TIM_PER 0x0000ffff /* Mask for TIM period (?) */ -#define AR5K_SLEEP2_TIM_PER_S 0 -#define AR5K_SLEEP2_DTIM_PER 0xffff0000 /* Mask for DTIM period (?) */ -#define AR5K_SLEEP2_DTIM_PER_S 16 - -/* - * BSSID mask registers - */ -#define AR5K_BSS_IDM0 0x80e0 /* Upper bits */ -#define AR5K_BSS_IDM1 0x80e4 /* Lower bits */ - -/* - * TX power control (TPC) register - * - * XXX: PCDAC steps (0.5dbm) or DBM ? - * - */ -#define AR5K_TXPC 0x80e8 /* Register Address */ -#define AR5K_TXPC_ACK_M 0x0000003f /* ACK tx power */ -#define AR5K_TXPC_ACK_S 0 -#define AR5K_TXPC_CTS_M 0x00003f00 /* CTS tx power */ -#define AR5K_TXPC_CTS_S 8 -#define AR5K_TXPC_CHIRP_M 0x003f0000 /* CHIRP tx power */ -#define AR5K_TXPC_CHIRP_S 16 -#define AR5K_TXPC_DOPPLER 0x0f000000 /* Doppler chirp span (?) */ -#define AR5K_TXPC_DOPPLER_S 24 - -/* - * Profile count registers - */ -#define AR5K_PROFCNT_TX 0x80ec /* Tx count */ -#define AR5K_PROFCNT_RX 0x80f0 /* Rx count */ -#define AR5K_PROFCNT_RXCLR 0x80f4 /* Clear Rx count */ -#define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle count (?) */ - -/* - * Quiet period control registers - */ -#define AR5K_QUIET_CTL1 0x80fc /* Register Address */ -#define AR5K_QUIET_CTL1_NEXT_QT_TSF 0x0000ffff /* Next quiet period TSF (TU) */ -#define AR5K_QUIET_CTL1_NEXT_QT_TSF_S 0 -#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet period */ -#define AR5K_QUIET_CTL1_ACK_CTS_EN 0x00020000 /* Send ACK/CTS during quiet period */ - -#define AR5K_QUIET_CTL2 0x8100 /* Register Address */ -#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period periodicity */ -#define AR5K_QUIET_CTL2_QT_PER_S 0 -#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet period duration */ -#define AR5K_QUIET_CTL2_QT_DUR_S 16 - -/* - * TSF parameter register - */ -#define AR5K_TSF_PARM 0x8104 /* Register Address */ -#define AR5K_TSF_PARM_INC_M 0x000000ff /* Mask for TSF increment */ -#define AR5K_TSF_PARM_INC_S 0 - -/* - * QoS NOACK policy - */ -#define AR5K_QOS_NOACK 0x8108 /* Register Address */ -#define AR5K_QOS_NOACK_2BIT_VALUES 0x0000000f /* ??? */ -#define AR5K_QOS_NOACK_2BIT_VALUES_S 0 -#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000070 /* ??? */ -#define AR5K_QOS_NOACK_BIT_OFFSET_S 4 -#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000180 /* ??? */ -#define AR5K_QOS_NOACK_BYTE_OFFSET_S 8 - -/* - * PHY error filter register - */ -#define AR5K_PHY_ERR_FIL 0x810c -#define AR5K_PHY_ERR_FIL_RADAR 0x00000020 /* Radar signal */ -#define AR5K_PHY_ERR_FIL_OFDM 0x00020000 /* OFDM false detect (ANI) */ -#define AR5K_PHY_ERR_FIL_CCK 0x02000000 /* CCK false detect (ANI) */ - -/* - * XR latency register - */ -#define AR5K_XRLAT_TX 0x8110 - -/* - * ACK SIFS register - */ -#define AR5K_ACKSIFS 0x8114 /* Register Address */ -#define AR5K_ACKSIFS_INC 0x00000000 /* ACK SIFS Increment (field) */ - -/* - * MIC QoS control register (?) - */ -#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */ -#define AR5K_MIC_QOS_CTL_OFF(_n) (1 << (_n * 2)) -#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */ - -/* - * MIC QoS select register (?) - */ -#define AR5K_MIC_QOS_SEL 0x811c -#define AR5K_MIC_QOS_SEL_OFF(_n) (1 << (_n * 4)) - -/* - * Misc mode control register (?) - */ -#define AR5K_MISC_MODE 0x8120 /* Register Address */ -#define AR5K_MISC_MODE_FBSSID_MATCH 0x00000001 /* Force BSSID match */ -#define AR5K_MISC_MODE_ACKSIFS_MEM 0x00000002 /* ACK SIFS memory (?) */ -#define AR5K_MISC_MODE_COMBINED_MIC 0x00000004 /* use rx/tx MIC key */ -/* more bits */ - -/* - * OFDM Filter counter - */ -#define AR5K_OFDM_FIL_CNT 0x8124 - -/* - * CCK Filter counter - */ -#define AR5K_CCK_FIL_CNT 0x8128 - -/* - * PHY Error Counters (?) - */ -#define AR5K_PHYERR_CNT1 0x812c -#define AR5K_PHYERR_CNT1_MASK 0x8130 - -#define AR5K_PHYERR_CNT2 0x8134 -#define AR5K_PHYERR_CNT2_MASK 0x8138 - -/* - * TSF Threshold register (?) - */ -#define AR5K_TSF_THRES 0x813c - -/* - * TODO: Wake On Wireless registers - * Range: 0x8147 - 0x818c - */ - -/* - * Rate -> ACK SIFS mapping table (32 entries) - */ -#define AR5K_RATE_ACKSIFS_BASE 0x8680 /* Register Address */ -#define AR5K_RATE_ACKSIFS(_n) (AR5K_RATE_ACKSIFS_BSE + ((_n) << 2)) -#define AR5K_RATE_ACKSIFS_NORMAL 0x00000001 /* Normal SIFS (field) */ -#define AR5K_RATE_ACKSIFS_TURBO 0x00000400 /* Turbo SIFS (field) */ - -/* - * Rate -> duration mapping table (32 entries) - */ -#define AR5K_RATE_DUR_BASE 0x8700 -#define AR5K_RATE_DUR(_n) (AR5K_RATE_DUR_BASE + ((_n) << 2)) - -/* - * Rate -> db mapping table - * (8 entries, each one has 4 8bit fields) - */ -#define AR5K_RATE2DB_BASE 0x87c0 -#define AR5K_RATE2DB(_n) (AR5K_RATE2DB_BASE + ((_n) << 2)) - -/* - * db -> Rate mapping table - * (8 entries, each one has 4 8bit fields) - */ -#define AR5K_DB2RATE_BASE 0x87e0 -#define AR5K_DB2RATE(_n) (AR5K_DB2RATE_BASE + ((_n) << 2)) - -/*===5212 end===*/ - -/* - * Key table (WEP) register - */ -#define AR5K_KEYTABLE_0_5210 0x9000 -#define AR5K_KEYTABLE_0_5211 0x8800 -#define AR5K_KEYTABLE_5210(_n) (AR5K_KEYTABLE_0_5210 + ((_n) << 5)) -#define AR5K_KEYTABLE_5211(_n) (AR5K_KEYTABLE_0_5211 + ((_n) << 5)) -#define AR5K_KEYTABLE(_n) (ah->ah_version == AR5K_AR5210 ? \ - AR5K_KEYTABLE_5210(_n) : AR5K_KEYTABLE_5211(_n)) -#define AR5K_KEYTABLE_OFF(_n, x) (AR5K_KEYTABLE(_n) + (x << 2)) -#define AR5K_KEYTABLE_TYPE(_n) AR5K_KEYTABLE_OFF(_n, 5) -#define AR5K_KEYTABLE_TYPE_40 0x00000000 -#define AR5K_KEYTABLE_TYPE_104 0x00000001 -#define AR5K_KEYTABLE_TYPE_128 0x00000003 -#define AR5K_KEYTABLE_TYPE_TKIP 0x00000004 /* [5212+] */ -#define AR5K_KEYTABLE_TYPE_AES 0x00000005 /* [5211+] */ -#define AR5K_KEYTABLE_TYPE_CCM 0x00000006 /* [5212+] */ -#define AR5K_KEYTABLE_TYPE_NULL 0x00000007 /* [5211+] */ -#define AR5K_KEYTABLE_ANTENNA 0x00000008 /* [5212+] */ -#define AR5K_KEYTABLE_MAC0(_n) AR5K_KEYTABLE_OFF(_n, 6) -#define AR5K_KEYTABLE_MAC1(_n) AR5K_KEYTABLE_OFF(_n, 7) -#define AR5K_KEYTABLE_VALID 0x00008000 - -/* If key type is TKIP and MIC is enabled - * MIC key goes in offset entry + 64 */ -#define AR5K_KEYTABLE_MIC_OFFSET 64 - -/* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit - * WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit - * WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit - * - * Some vendors have introduced bigger WEP keys to address - * security vulnerabilities in WEP. This includes: - * - * WEP 232-bit = 232-bit entered key + 24 bit IV = 256-bit - * - * We can expand this if we find ar5k Atheros cards with a larger - * key table size. - */ -#define AR5K_KEYTABLE_SIZE_5210 64 -#define AR5K_KEYTABLE_SIZE_5211 128 -#define AR5K_KEYTABLE_SIZE (ah->ah_version == AR5K_AR5210 ? \ - AR5K_KEYTABLE_SIZE_5210 : AR5K_KEYTABLE_SIZE_5211) - - -/*===PHY REGISTERS===*/ - -/* - * PHY registers start - */ -#define AR5K_PHY_BASE 0x9800 -#define AR5K_PHY(_n) (AR5K_PHY_BASE + ((_n) << 2)) - -/* - * TST_2 (Misc config parameters) - */ -#define AR5K_PHY_TST2 0x9800 /* Register Address */ -#define AR5K_PHY_TST2_TRIG_SEL 0x00000001 /* Trigger select (?) (field ?) */ -#define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) (field ?) */ -#define AR5K_PHY_TST2_CBUS_MODE 0x00000100 /* Cardbus mode (?) */ -/* bit reserved */ -#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32Khz external) */ -#define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */ -#define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */ -#define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */ -#define AR5K_PHY_TST2_ALT_RFDATA 0x00004000 /* Alternate RFDATA (5-2GHz switch) */ -#define AR5K_PHY_TST2_MINI_OBS_EN 0x00008000 /* Enable mini OBS (?) */ -#define AR5K_PHY_TST2_RX2_IS_RX5_INV 0x00010000 /* 2GHz rx path is the 5GHz path inverted (?) */ -#define AR5K_PHY_TST2_SLOW_CLK160 0x00020000 /* Slow CLK160 (?) */ -#define AR5K_PHY_TST2_AGC_OBS_SEL_3 0x00040000 /* AGC OBS Select 3 (?) */ -#define AR5K_PHY_TST2_BBB_OBS_SEL 0x00080000 /* BB OBS Select (field ?) */ -#define AR5K_PHY_TST2_ADC_OBS_SEL 0x00800000 /* ADC OBS Select (field ?) */ -#define AR5K_PHY_TST2_RX_CLR_SEL 0x08000000 /* RX Clear Select (?) */ -#define AR5K_PHY_TST2_FORCE_AGC_CLR 0x10000000 /* Force AGC clear (?) */ -#define AR5K_PHY_SHIFT_2GHZ 0x00004007 /* Used to access 2GHz radios */ -#define AR5K_PHY_SHIFT_5GHZ 0x00000007 /* Used to access 5GHz radios (default) */ - -/* - * PHY frame control register [5110] /turbo mode register [5111+] - * - * There is another frame control register for [5111+] - * at address 0x9944 (see below) but the 2 first flags - * are common here between 5110 frame control register - * and [5111+] turbo mode register, so this also works as - * a "turbo mode register" for 5110. We treat this one as - * a frame control register for 5110 below. - */ -#define AR5K_PHY_TURBO 0x9804 /* Register Address */ -#define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */ -#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Set short symbols to turbo mode */ -#define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo mimo */ - -/* - * PHY agility command register - * (aka TST_1) - */ -#define AR5K_PHY_AGC 0x9808 /* Register Address */ -#define AR5K_PHY_TST1 0x9808 -#define AR5K_PHY_AGC_DISABLE 0x08000000 /* Disable AGC to A2 (?)*/ -#define AR5K_PHY_TST1_TXHOLD 0x00003800 /* Set tx hold (?) */ -#define AR5K_PHY_TST1_TXSRC_SRC 0x00000002 /* Used with bit 7 (?) */ -#define AR5K_PHY_TST1_TXSRC_SRC_S 1 -#define AR5K_PHY_TST1_TXSRC_ALT 0x00000080 /* Set input to tsdac (?) */ -#define AR5K_PHY_TST1_TXSRC_ALT_S 7 - - -/* - * PHY timing register 3 [5112+] - */ -#define AR5K_PHY_TIMING_3 0x9814 -#define AR5K_PHY_TIMING_3_DSC_MAN 0xfffe0000 -#define AR5K_PHY_TIMING_3_DSC_MAN_S 17 -#define AR5K_PHY_TIMING_3_DSC_EXP 0x0001e000 -#define AR5K_PHY_TIMING_3_DSC_EXP_S 13 - -/* - * PHY chip revision register - */ -#define AR5K_PHY_CHIP_ID 0x9818 - -/* - * PHY activation register - */ -#define AR5K_PHY_ACT 0x981c /* Register Address */ -#define AR5K_PHY_ACT_ENABLE 0x00000001 /* Activate PHY */ -#define AR5K_PHY_ACT_DISABLE 0x00000002 /* Deactivate PHY */ - -/* - * PHY RF control registers - */ -#define AR5K_PHY_RF_CTL2 0x9824 /* Register Address */ -#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* TX frame to TX data start */ -#define AR5K_PHY_RF_CTL2_TXF2TXD_START_S 0 - -#define AR5K_PHY_RF_CTL3 0x9828 /* Register Address */ -#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000000f /* TX end to XLNA on */ -#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S 0 - -#define AR5K_PHY_ADC_CTL 0x982c -#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF 0x00000003 -#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S 0 -#define AR5K_PHY_ADC_CTL_PWD_DAC_OFF 0x00002000 -#define AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF 0x00004000 -#define AR5K_PHY_ADC_CTL_PWD_ADC_OFF 0x00008000 -#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON 0x00030000 -#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S 16 - -#define AR5K_PHY_RF_CTL4 0x9834 /* Register Address */ -#define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON 0x00000001 /* TX frame to XPA A on (field) */ -#define AR5K_PHY_RF_CTL4_TXF2XPA_B_ON 0x00000100 /* TX frame to XPA B on (field) */ -#define AR5K_PHY_RF_CTL4_TXE2XPA_A_OFF 0x00010000 /* TX end to XPA A off (field) */ -#define AR5K_PHY_RF_CTL4_TXE2XPA_B_OFF 0x01000000 /* TX end to XPA B off (field) */ - -/* - * Pre-Amplifier control register - * (XPA -> external pre-amplifier) - */ -#define AR5K_PHY_PA_CTL 0x9838 /* Register Address */ -#define AR5K_PHY_PA_CTL_XPA_A_HI 0x00000001 /* XPA A high (?) */ -#define AR5K_PHY_PA_CTL_XPA_B_HI 0x00000002 /* XPA B high (?) */ -#define AR5K_PHY_PA_CTL_XPA_A_EN 0x00000004 /* Enable XPA A */ -#define AR5K_PHY_PA_CTL_XPA_B_EN 0x00000008 /* Enable XPA B */ - -/* - * PHY settling register - */ -#define AR5K_PHY_SETTLING 0x9844 /* Register Address */ -#define AR5K_PHY_SETTLING_AGC 0x0000007f /* AGC settling time */ -#define AR5K_PHY_SETTLING_AGC_S 0 -#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Switch settlig time */ -#define AR5K_PHY_SETTLINK_SWITCH_S 7 - -/* - * PHY Gain registers - */ -#define AR5K_PHY_GAIN 0x9848 /* Register Address */ -#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* TX-RX Attenuation */ -#define AR5K_PHY_GAIN_TXRX_ATTEN_S 12 -#define AR5K_PHY_GAIN_TXRX_RF_MAX 0x007c0000 -#define AR5K_PHY_GAIN_TXRX_RF_MAX_S 18 - -#define AR5K_PHY_GAIN_OFFSET 0x984c /* Register Address */ -#define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */ - -/* - * Desired ADC/PGA size register - * (for more infos read ANI patent) - */ -#define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */ -#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* ADC desired size */ -#define AR5K_PHY_DESIRED_SIZE_ADC_S 0 -#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* PGA desired size */ -#define AR5K_PHY_DESIRED_SIZE_PGA_S 8 -#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Total desired size */ -#define AR5K_PHY_DESIRED_SIZE_TOT_S 20 - -/* - * PHY signal register - * (for more infos read ANI patent) - */ -#define AR5K_PHY_SIG 0x9858 /* Register Address */ -#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* FIRSTEP */ -#define AR5K_PHY_SIG_FIRSTEP_S 12 -#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* FIPWR */ -#define AR5K_PHY_SIG_FIRPWR_S 18 - -/* - * PHY coarse agility control register - * (for more infos read ANI patent) - */ -#define AR5K_PHY_AGCCOARSE 0x985c /* Register Address */ -#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* AGC Coarse low */ -#define AR5K_PHY_AGCCOARSE_LO_S 7 -#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* AGC Coarse high */ -#define AR5K_PHY_AGCCOARSE_HI_S 15 - -/* - * PHY agility control register - */ -#define AR5K_PHY_AGCCTL 0x9860 /* Register address */ -#define AR5K_PHY_AGCCTL_CAL 0x00000001 /* Enable PHY calibration */ -#define AR5K_PHY_AGCCTL_NF 0x00000002 /* Enable Noise Floor calibration */ -#define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */ -#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */ - -/* - * PHY noise floor status register - */ -#define AR5K_PHY_NF 0x9864 /* Register address */ -#define AR5K_PHY_NF_M 0x000001ff /* Noise floor mask */ -#define AR5K_PHY_NF_ACTIVE 0x00000100 /* Noise floor calibration still active */ -#define AR5K_PHY_NF_RVAL(_n) (((_n) >> 19) & AR5K_PHY_NF_M) -#define AR5K_PHY_NF_AVAL(_n) (-((_n) ^ AR5K_PHY_NF_M) + 1) -#define AR5K_PHY_NF_SVAL(_n) (((_n) & AR5K_PHY_NF_M) | (1 << 9)) -#define AR5K_PHY_NF_THRESH62 0x0007f000 /* Thresh62 -check ANI patent- (field) */ -#define AR5K_PHY_NF_THRESH62_S 12 -#define AR5K_PHY_NF_MINCCA_PWR 0x0ff80000 /* ??? */ -#define AR5K_PHY_NF_MINCCA_PWR_S 19 - -/* - * PHY ADC saturation register [5110] - */ -#define AR5K_PHY_ADCSAT 0x9868 -#define AR5K_PHY_ADCSAT_ICNT 0x0001f800 -#define AR5K_PHY_ADCSAT_ICNT_S 11 -#define AR5K_PHY_ADCSAT_THR 0x000007e0 -#define AR5K_PHY_ADCSAT_THR_S 5 - -/* - * PHY Weak ofdm signal detection threshold registers (ANI) [5212+] - */ - -/* High thresholds */ -#define AR5K_PHY_WEAK_OFDM_HIGH_THR 0x9868 -#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT 0x0000001f -#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT_S 0 -#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1 0x00fe0000 -#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1_S 17 -#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2 0x7f000000 -#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S 24 - -/* Low thresholds */ -#define AR5K_PHY_WEAK_OFDM_LOW_THR 0x986c -#define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN 0x00000001 -#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT 0x00003f00 -#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S 8 -#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1 0x001fc000 -#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1_S 14 -#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2 0x0fe00000 -#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_S 21 - - -/* - * PHY sleep registers [5112+] - */ -#define AR5K_PHY_SCR 0x9870 -#define AR5K_PHY_SCR_32MHZ 0x0000001f - -#define AR5K_PHY_SLMT 0x9874 -#define AR5K_PHY_SLMT_32MHZ 0x0000007f - -#define AR5K_PHY_SCAL 0x9878 -#define AR5K_PHY_SCAL_32MHZ 0x0000000e - - -/* - * PHY PLL (Phase Locked Loop) control register - */ -#define AR5K_PHY_PLL 0x987c -#define AR5K_PHY_PLL_20MHZ 0x00000013 /* For half rate (?) */ -/* 40MHz -> 5GHz band */ -#define AR5K_PHY_PLL_40MHZ_5211 0x00000018 -#define AR5K_PHY_PLL_40MHZ_5212 0x000000aa -#define AR5K_PHY_PLL_40MHZ_5413 0x00000004 -#define AR5K_PHY_PLL_40MHZ (ah->ah_version == AR5K_AR5211 ? \ - AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212) -/* 44MHz -> 2.4GHz band */ -#define AR5K_PHY_PLL_44MHZ_5211 0x00000019 -#define AR5K_PHY_PLL_44MHZ_5212 0x000000ab -#define AR5K_PHY_PLL_44MHZ (ah->ah_version == AR5K_AR5211 ? \ - AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212) - -#define AR5K_PHY_PLL_RF5111 0x00000000 -#define AR5K_PHY_PLL_RF5112 0x00000040 -#define AR5K_PHY_PLL_HALF_RATE 0x00000100 -#define AR5K_PHY_PLL_QUARTER_RATE 0x00000200 - -/* - * RF Buffer register - * - * There are some special control registers on the RF chip - * that hold various operation settings related mostly to - * the analog parts (channel, gain adjustment etc). - * - * We don't write on those registers directly but - * we send a data packet on the buffer register and - * then write on another special register to notify hw - * to apply the settings. This is done so that control registers - * can be dynamicaly programmed during operation and the settings - * are applied faster on the hw. - * - * We sent such data packets during rf initialization and channel change - * through ath5k_hw_rf*_rfregs and ath5k_hw_rf*_channel functions. - * - * The data packets we send during initializadion are inside ath5k_ini_rf - * struct (see ath5k_hw.h) and each one is related to an "rf register bank". - * We use *rfregs functions to modify them acording to current operation - * mode and eeprom values and pass them all together to the chip. - * - * It's obvious from the code that 0x989c is the buffer register but - * for the other special registers that we write to after sending each - * packet, i have no idea. So i'll name them BUFFER_CONTROL_X registers - * for now. It's interesting that they are also used for some other operations. - * - * Also check out hw.h and U.S. Patent 6677779 B1 (about buffer - * registers and control registers): - * - * http://www.google.com/patents?id=qNURAAAAEBAJ - */ - -#define AR5K_RF_BUFFER 0x989c -#define AR5K_RF_BUFFER_CONTROL_0 0x98c0 /* Channel on 5110 */ -#define AR5K_RF_BUFFER_CONTROL_1 0x98c4 /* Bank 7 on 5112 */ -#define AR5K_RF_BUFFER_CONTROL_2 0x98cc /* Bank 7 on 5111 */ - -#define AR5K_RF_BUFFER_CONTROL_3 0x98d0 /* Bank 2 on 5112 */ - /* Channel set on 5111 */ - /* Used to read radio revision*/ - -#define AR5K_RF_BUFFER_CONTROL_4 0x98d4 /* RF Stage register on 5110 */ - /* Bank 0,1,2,6 on 5111 */ - /* Bank 1 on 5112 */ - /* Used during activation on 5111 */ - -#define AR5K_RF_BUFFER_CONTROL_5 0x98d8 /* Bank 3 on 5111 */ - /* Used during activation on 5111 */ - /* Channel on 5112 */ - /* Bank 6 on 5112 */ - -#define AR5K_RF_BUFFER_CONTROL_6 0x98dc /* Bank 3 on 5112 */ - -/* - * PHY RF stage register [5210] - */ -#define AR5K_PHY_RFSTG 0x98d4 -#define AR5K_PHY_RFSTG_DISABLE 0x00000021 - -/* - * BIN masks (?) - */ -#define AR5K_PHY_BIN_MASK_1 0x9900 -#define AR5K_PHY_BIN_MASK_2 0x9904 -#define AR5K_PHY_BIN_MASK_3 0x9908 - -#define AR5K_PHY_BIN_MASK_CTL 0x990c -#define AR5K_PHY_BIN_MASK_CTL_MASK_4 0x00003fff -#define AR5K_PHY_BIN_MASK_CTL_MASK_4_S 0 -#define AR5K_PHY_BIN_MASK_CTL_RATE 0xff000000 -#define AR5K_PHY_BIN_MASK_CTL_RATE_S 24 - -/* - * PHY Antenna control register - */ -#define AR5K_PHY_ANT_CTL 0x9910 /* Register Address */ -#define AR5K_PHY_ANT_CTL_TXRX_EN 0x00000001 /* Enable TX/RX (?) */ -#define AR5K_PHY_ANT_CTL_SECTORED_ANT 0x00000004 /* Sectored Antenna */ -#define AR5K_PHY_ANT_CTL_HITUNE5 0x00000008 /* Hitune5 (?) */ -#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE 0x00000010 /* Switch table idle (?) */ - -/* - * PHY receiver delay register [5111+] - */ -#define AR5K_PHY_RX_DELAY 0x9914 /* Register Address */ -#define AR5K_PHY_RX_DELAY_M 0x00003fff /* Mask for RX activate to receive delay (/100ns) */ - -/* - * PHY max rx length register (?) [5111] - */ -#define AR5K_PHY_MAX_RX_LEN 0x991c - -/* - * PHY timing register 4 - * I(nphase)/Q(adrature) calibration register [5111+] - */ -#define AR5K_PHY_IQ 0x9920 /* Register Address */ -#define AR5K_PHY_IQ_CORR_Q_Q_COFF 0x0000001f /* Mask for q correction info */ -#define AR5K_PHY_IQ_CORR_Q_I_COFF 0x000007e0 /* Mask for i correction info */ -#define AR5K_PHY_IQ_CORR_Q_I_COFF_S 5 -#define AR5K_PHY_IQ_CORR_ENABLE 0x00000800 /* Enable i/q correction */ -#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX 0x0000f000 /* Mask for max number of samples in log scale */ -#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX_S 12 -#define AR5K_PHY_IQ_RUN 0x00010000 /* Run i/q calibration */ -#define AR5K_PHY_IQ_USE_PT_DF 0x00020000 /* Use pilot track df (?) */ -#define AR5K_PHY_IQ_EARLY_TRIG_THR 0x00200000 /* Early trigger threshold (?) (field) */ -#define AR5K_PHY_IQ_PILOT_MASK_EN 0x10000000 /* Enable pilot mask (?) */ -#define AR5K_PHY_IQ_CHAN_MASK_EN 0x20000000 /* Enable channel mask (?) */ -#define AR5K_PHY_IQ_SPUR_FILT_EN 0x40000000 /* Enable spur filter */ -#define AR5K_PHY_IQ_SPUR_RSSI_EN 0x80000000 /* Enable spur rssi */ - -/* - * PHY timing register 5 - * OFDM Self-correlator Cyclic RSSI threshold params - * (Check out bb_cycpwr_thr1 on ANI patent) - */ -#define AR5K_PHY_OFDM_SELFCORR 0x9924 /* Register Address */ -#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN 0x00000001 /* Enable cyclic RSSI thr 1 */ -#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1 0x000000fe /* Mask for Cyclic RSSI threshold 1 */ -#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S 0 -#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3 0x00000100 /* Cyclic RSSI threshold 3 (field) (?) */ -#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN 0x00008000 /* Enable 1A RSSI threshold (?) */ -#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR 0x00010000 /* 1A RSSI threshold (field) (?) */ -#define AR5K_PHY_OFDM_SELFCORR_LSCTHR_HIRSSI 0x00800000 /* Long sc threshold hi rssi (?) */ - -/* - * PHY-only warm reset register - */ -#define AR5K_PHY_WARM_RESET 0x9928 - -/* - * PHY-only control register - */ -#define AR5K_PHY_CTL 0x992c /* Register Address */ -#define AR5K_PHY_CTL_RX_DRAIN_RATE 0x00000001 /* RX drain rate (?) */ -#define AR5K_PHY_CTL_LATE_TX_SIG_SYM 0x00000002 /* Late tx signal symbol (?) */ -#define AR5K_PHY_CTL_GEN_SCRAMBLER 0x00000004 /* Generate scrambler */ -#define AR5K_PHY_CTL_TX_ANT_SEL 0x00000008 /* TX antenna select */ -#define AR5K_PHY_CTL_TX_ANT_STATIC 0x00000010 /* Static TX antenna */ -#define AR5K_PHY_CTL_RX_ANT_SEL 0x00000020 /* RX antenna select */ -#define AR5K_PHY_CTL_RX_ANT_STATIC 0x00000040 /* Static RX antenna */ -#define AR5K_PHY_CTL_LOW_FREQ_SLE_EN 0x00000080 /* Enable low freq sleep */ - -/* - * PHY PAPD probe register [5111+ (?)] - * Is this only present in 5212 ? - * Because it's always 0 in 5211 initialization code - */ -#define AR5K_PHY_PAPD_PROBE 0x9930 -#define AR5K_PHY_PAPD_PROBE_SH_HI_PAR 0x00000001 -#define AR5K_PHY_PAPD_PROBE_PCDAC_BIAS 0x00000002 -#define AR5K_PHY_PAPD_PROBE_COMP_GAIN 0x00000040 -#define AR5K_PHY_PAPD_PROBE_TXPOWER 0x00007e00 -#define AR5K_PHY_PAPD_PROBE_TXPOWER_S 9 -#define AR5K_PHY_PAPD_PROBE_TX_NEXT 0x00008000 -#define AR5K_PHY_PAPD_PROBE_PREDIST_EN 0x00010000 -#define AR5K_PHY_PAPD_PROBE_TYPE 0x01800000 /* [5112+] */ -#define AR5K_PHY_PAPD_PROBE_TYPE_S 23 -#define AR5K_PHY_PAPD_PROBE_TYPE_OFDM 0 -#define AR5K_PHY_PAPD_PROBE_TYPE_XR 1 -#define AR5K_PHY_PAPD_PROBE_TYPE_CCK 2 -#define AR5K_PHY_PAPD_PROBE_GAINF 0xfe000000 -#define AR5K_PHY_PAPD_PROBE_GAINF_S 25 -#define AR5K_PHY_PAPD_PROBE_INI_5111 0x00004883 /* [5212+] */ -#define AR5K_PHY_PAPD_PROBE_INI_5112 0x00004882 /* [5212+] */ - -/* - * PHY TX rate power registers [5112+] - */ -#define AR5K_PHY_TXPOWER_RATE1 0x9934 -#define AR5K_PHY_TXPOWER_RATE2 0x9938 -#define AR5K_PHY_TXPOWER_RATE_MAX 0x993c -#define AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE 0x00000040 -#define AR5K_PHY_TXPOWER_RATE3 0xa234 -#define AR5K_PHY_TXPOWER_RATE4 0xa238 - -/* - * PHY frame control register [5111+] - */ -#define AR5K_PHY_FRAME_CTL_5210 0x9804 -#define AR5K_PHY_FRAME_CTL_5211 0x9944 -#define AR5K_PHY_FRAME_CTL (ah->ah_version == AR5K_AR5210 ? \ - AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211) -/*---[5111+]---*/ -#define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 /* Mask for tx clip (?) */ -#define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3 -#define AR5K_PHY_FRAME_CTL_PREP_CHINFO 0x00010000 /* Prepend chan info */ -#define AR5K_PHY_FRAME_CTL_EMU 0x80000000 -#define AR5K_PHY_FRAME_CTL_EMU_S 31 -/*---[5110/5111]---*/ -#define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 /* PHY timing error */ -#define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 /* Parity error */ -#define AR5K_PHY_FRAME_CTL_ILLRATE_ERR 0x04000000 /* Illegal rate */ -#define AR5K_PHY_FRAME_CTL_ILLLEN_ERR 0x08000000 /* Illegal length */ -#define AR5K_PHY_FRAME_CTL_SERVICE_ERR 0x20000000 -#define AR5K_PHY_FRAME_CTL_TXURN_ERR 0x40000000 /* TX underrun */ -#define AR5K_PHY_FRAME_CTL_INI AR5K_PHY_FRAME_CTL_SERVICE_ERR | \ - AR5K_PHY_FRAME_CTL_TXURN_ERR | \ - AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \ - AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \ - AR5K_PHY_FRAME_CTL_PARITY_ERR | \ - AR5K_PHY_FRAME_CTL_TIMING_ERR - -/* - * PHY radar detection register [5111+] - */ -#define AR5K_PHY_RADAR 0x9954 -#define AR5K_PHY_RADAR_ENABLE 0x00000001 -#define AR5K_PHY_RADAR_DISABLE 0x00000000 -#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold - 5-bits, units unknown {0..31} - (? MHz ?) */ -#define AR5K_PHY_RADAR_INBANDTHR_S 1 - -#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold - 6-bits, dBm range {0..63} - in dBm units. */ -#define AR5K_PHY_RADAR_PRSSI_THR_S 6 - -#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold - 6-bits, dBm range {0..63} - in dBm units. */ -#define AR5K_PHY_RADAR_PHEIGHT_THR_S 12 - -#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold. - 6-bits, dBm range {0..63} - in dBm units. */ -#define AR5K_PHY_RADAR_RSSI_THR_S 18 - -#define AR5K_PHY_RADAR_FIRPWR_THR 0x7f000000 /* Finite Impulse Response - filter power out threshold. - 7-bits, standard power range - {0..127} in 1/2 dBm units. */ -#define AR5K_PHY_RADAR_FIRPWR_THRS 24 - -/* - * PHY antenna switch table registers - */ -#define AR5K_PHY_ANT_SWITCH_TABLE_0 0x9960 -#define AR5K_PHY_ANT_SWITCH_TABLE_1 0x9964 - -/* - * PHY Noise floor threshold - */ -#define AR5K_PHY_NFTHRES 0x9968 - -/* - * Sigma Delta register (?) [5213] - */ -#define AR5K_PHY_SIGMA_DELTA 0x996C -#define AR5K_PHY_SIGMA_DELTA_ADC_SEL 0x00000003 -#define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S 0 -#define AR5K_PHY_SIGMA_DELTA_FILT2 0x000000f8 -#define AR5K_PHY_SIGMA_DELTA_FILT2_S 3 -#define AR5K_PHY_SIGMA_DELTA_FILT1 0x00001f00 -#define AR5K_PHY_SIGMA_DELTA_FILT1_S 8 -#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP 0x01ff3000 -#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S 13 - -/* - * RF restart register [5112+] (?) - */ -#define AR5K_PHY_RESTART 0x9970 /* restart */ -#define AR5K_PHY_RESTART_DIV_GC 0x001c0000 /* Fast diversity gc_limit (?) */ -#define AR5K_PHY_RESTART_DIV_GC_S 18 - -/* - * RF Bus access request register (for synth-oly channel switching) - */ -#define AR5K_PHY_RFBUS_REQ 0x997C -#define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001 - -/* - * Spur mitigation masks (?) - */ -#define AR5K_PHY_TIMING_7 0x9980 -#define AR5K_PHY_TIMING_8 0x9984 -#define AR5K_PHY_TIMING_8_PILOT_MASK_2 0x000fffff -#define AR5K_PHY_TIMING_8_PILOT_MASK_2_S 0 - -#define AR5K_PHY_BIN_MASK2_1 0x9988 -#define AR5K_PHY_BIN_MASK2_2 0x998c -#define AR5K_PHY_BIN_MASK2_3 0x9990 - -#define AR5K_PHY_BIN_MASK2_4 0x9994 -#define AR5K_PHY_BIN_MASK2_4_MASK_4 0x00003fff -#define AR5K_PHY_BIN_MASK2_4_MASK_4_S 0 - -#define AR_PHY_TIMING_9 0x9998 -#define AR_PHY_TIMING_10 0x999c -#define AR_PHY_TIMING_10_PILOT_MASK_2 0x000fffff -#define AR_PHY_TIMING_10_PILOT_MASK_2_S 0 - -/* - * Spur mitigation control - */ -#define AR_PHY_TIMING_11 0x99a0 /* Register address */ -#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE 0x000fffff /* Spur delta phase */ -#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE_S 0 -#define AR_PHY_TIMING_11_SPUR_FREQ_SD 0x3ff00000 /* Freq sigma delta */ -#define AR_PHY_TIMING_11_SPUR_FREQ_SD_S 20 -#define AR_PHY_TIMING_11_USE_SPUR_IN_AGC 0x40000000 /* Spur filter in AGC detector */ -#define AR_PHY_TIMING_11_USE_SPUR_IN_SELFCOR 0x80000000 /* Spur filter in OFDM self correlator */ - -/* - * Gain tables - */ -#define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */ -#define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2)) -#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplrifier Gain table base address */ -#define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2)) - -/* - * PHY timing IQ calibration result register [5111+] - */ -#define AR5K_PHY_IQRES_CAL_PWR_I 0x9c10 /* I (Inphase) power value */ -#define AR5K_PHY_IQRES_CAL_PWR_Q 0x9c14 /* Q (Quadrature) power value */ -#define AR5K_PHY_IQRES_CAL_CORR 0x9c18 /* I/Q Correlation */ - -/* - * PHY current RSSI register [5111+] - */ -#define AR5K_PHY_CURRENT_RSSI 0x9c1c - -/* - * PHY RF Bus grant register - */ -#define AR5K_PHY_RFBUS_GRANT 0x9c20 -#define AR5K_PHY_RFBUS_GRANT_OK 0x00000001 - -/* - * PHY ADC test register - */ -#define AR5K_PHY_ADC_TEST 0x9c24 -#define AR5K_PHY_ADC_TEST_I 0x00000001 -#define AR5K_PHY_ADC_TEST_Q 0x00000200 - -/* - * PHY DAC test register - */ -#define AR5K_PHY_DAC_TEST 0x9c28 -#define AR5K_PHY_DAC_TEST_I 0x00000001 -#define AR5K_PHY_DAC_TEST_Q 0x00000200 - -/* - * PHY PTAT register (?) - */ -#define AR5K_PHY_PTAT 0x9c2c - -/* - * PHY Illegal TX rate register [5112+] - */ -#define AR5K_PHY_BAD_TX_RATE 0x9c30 - -/* - * PHY SPUR Power register [5112+] - */ -#define AR5K_PHY_SPUR_PWR 0x9c34 /* Register Address */ -#define AR5K_PHY_SPUR_PWR_I 0x00000001 /* SPUR Power estimate for I (field) */ -#define AR5K_PHY_SPUR_PWR_Q 0x00000100 /* SPUR Power estimate for Q (field) */ -#define AR5K_PHY_SPUR_PWR_FILT 0x00010000 /* Power with SPUR removed (field) */ - -/* - * PHY Channel status register [5112+] (?) - */ -#define AR5K_PHY_CHAN_STATUS 0x9c38 -#define AR5K_PHY_CHAN_STATUS_BT_ACT 0x00000001 -#define AR5K_PHY_CHAN_STATUS_RX_CLR_RAW 0x00000002 -#define AR5K_PHY_CHAN_STATUS_RX_CLR_MAC 0x00000004 -#define AR5K_PHY_CHAN_STATUS_RX_CLR_PAP 0x00000008 - -/* - * Heavy clip enable register - */ -#define AR5K_PHY_HEAVY_CLIP_ENABLE 0x99e0 - -/* - * PHY clock sleep registers [5112+] - */ -#define AR5K_PHY_SCLOCK 0x99f0 -#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c -#define AR5K_PHY_SDELAY 0x99f4 -#define AR5K_PHY_SDELAY_32MHZ 0x000000ff -#define AR5K_PHY_SPENDING 0x99f8 -#define AR5K_PHY_SPENDING_14 0x00000014 -#define AR5K_PHY_SPENDING_18 0x00000018 -#define AR5K_PHY_SPENDING_RF5111 0x00000018 -#define AR5K_PHY_SPENDING_RF5112 0x00000014 -/* #define AR5K_PHY_SPENDING_RF5112A 0x0000000e */ -/* #define AR5K_PHY_SPENDING_RF5424 0x00000012 */ -#define AR5K_PHY_SPENDING_RF5413 0x00000018 -#define AR5K_PHY_SPENDING_RF2413 0x00000018 -#define AR5K_PHY_SPENDING_RF2316 0x00000018 -#define AR5K_PHY_SPENDING_RF2317 0x00000018 -#define AR5K_PHY_SPENDING_RF2425 0x00000014 - -/* - * PHY PAPD I (power?) table (?) - * (92! entries) - */ -#define AR5K_PHY_PAPD_I_BASE 0xa000 -#define AR5K_PHY_PAPD_I(_n) (AR5K_PHY_PAPD_I_BASE + ((_n) << 2)) - -/* - * PHY PCDAC TX power table - */ -#define AR5K_PHY_PCDAC_TXPOWER_BASE_5211 0xa180 -#define AR5K_PHY_PCDAC_TXPOWER_BASE_2413 0xa280 -#define AR5K_PHY_PCDAC_TXPOWER_BASE (ah->ah_radio >= AR5K_RF2413 ? \ - AR5K_PHY_PCDAC_TXPOWER_BASE_2413 :\ - AR5K_PHY_PCDAC_TXPOWER_BASE_5211) -#define AR5K_PHY_PCDAC_TXPOWER(_n) (AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2)) - -/* - * PHY mode register [5111+] - */ -#define AR5K_PHY_MODE 0x0a200 /* Register Address */ -#define AR5K_PHY_MODE_MOD 0x00000001 /* PHY Modulation bit */ -#define AR5K_PHY_MODE_MOD_OFDM 0 -#define AR5K_PHY_MODE_MOD_CCK 1 -#define AR5K_PHY_MODE_FREQ 0x00000002 /* Freq mode bit */ -#define AR5K_PHY_MODE_FREQ_5GHZ 0 -#define AR5K_PHY_MODE_FREQ_2GHZ 2 -#define AR5K_PHY_MODE_MOD_DYN 0x00000004 /* Enable Dynamic OFDM/CCK mode [5112+] */ -#define AR5K_PHY_MODE_RAD 0x00000008 /* [5212+] */ -#define AR5K_PHY_MODE_RAD_RF5111 0 -#define AR5K_PHY_MODE_RAD_RF5112 8 -#define AR5K_PHY_MODE_XR 0x00000010 /* Enable XR mode [5112+] */ -#define AR5K_PHY_MODE_HALF_RATE 0x00000020 /* Enable Half rate (test) */ -#define AR5K_PHY_MODE_QUARTER_RATE 0x00000040 /* Enable Quarter rat (test) */ - -/* - * PHY CCK transmit control register [5111+ (?)] - */ -#define AR5K_PHY_CCKTXCTL 0xa204 -#define AR5K_PHY_CCKTXCTL_WORLD 0x00000000 -#define AR5K_PHY_CCKTXCTL_JAPAN 0x00000010 -#define AR5K_PHY_CCKTXCTL_SCRAMBLER_DIS 0x00000001 -#define AR5K_PHY_CCKTXCTK_DAC_SCALE 0x00000004 - -/* - * PHY CCK Cross-correlator Barker RSSI threshold register [5212+] - */ -#define AR5K_PHY_CCK_CROSSCORR 0xa208 -#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000000f -#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0 - -/* Same address is used for antenna diversity activation */ -#define AR5K_PHY_FAST_ANT_DIV 0xa208 -#define AR5K_PHY_FAST_ANT_DIV_EN 0x00002000 - -/* - * PHY 2GHz gain register [5111+] - */ -#define AR5K_PHY_GAIN_2GHZ 0xa20c -#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000 -#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S 18 -#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c - -#define AR5K_PHY_CCK_RX_CTL_4 0xa21c -#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT 0x01f80000 -#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S 19 - -#define AR5K_PHY_DAG_CCK_CTL 0xa228 -#define AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR 0x00000200 -#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR 0x0001fc00 -#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S 10 - -#define AR5K_PHY_FAST_ADC 0xa24c - -#define AR5K_PHY_BLUETOOTH 0xa254 - -/* - * Transmit Power Control register - * [2413+] - */ -#define AR5K_PHY_TPC_RG1 0xa258 -#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000 -#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14 - -#define AR5K_PHY_TPC_RG5 0xa26C -#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F -#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S 0 -#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1 0x000003F0 -#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S 4 -#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2 0x0000FC00 -#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S 10 -#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3 0x003F0000 -#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S 16 -#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4 0x0FC00000 -#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S 22 diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c deleted file mode 100644 index dc2d7d8bdb7..00000000000 --- a/drivers/net/wireless/ath5k/reset.c +++ /dev/null @@ -1,920 +0,0 @@ -/* - * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu> - * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> - * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#define _ATH5K_RESET - -/*****************************\ - Reset functions and helpers -\*****************************/ - -#include <linux/pci.h> -#include "ath5k.h" -#include "reg.h" -#include "base.h" -#include "debug.h" - -/** - * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212 - * - * @ah: the &struct ath5k_hw - * @channel: the currently set channel upon reset - * - * Write the OFDM timings for the AR5212 upon reset. This is a helper for - * ath5k_hw_reset(). This seems to tune the PLL a specified frequency - * depending on the bandwidth of the channel. - * - */ -static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, - struct ieee80211_channel *channel) -{ - /* Get exponent and mantissa and set it */ - u32 coef_scaled, coef_exp, coef_man, - ds_coef_exp, ds_coef_man, clock; - - if (!(ah->ah_version == AR5K_AR5212) || - !(channel->hw_value & CHANNEL_OFDM)) - BUG(); - - /* Seems there are two PLLs, one for baseband sampling and one - * for tuning. Tuning basebands are 40 MHz or 80MHz when in - * turbo. */ - clock = channel->hw_value & CHANNEL_TURBO ? 80 : 40; - coef_scaled = ((5 * (clock << 24)) / 2) / - channel->center_freq; - - for (coef_exp = 31; coef_exp > 0; coef_exp--) - if ((coef_scaled >> coef_exp) & 0x1) - break; - - if (!coef_exp) - return -EINVAL; - - coef_exp = 14 - (coef_exp - 24); - coef_man = coef_scaled + - (1 << (24 - coef_exp - 1)); - ds_coef_man = coef_man >> (24 - coef_exp); - ds_coef_exp = coef_exp - 16; - - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, - AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man); - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, - AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp); - - return 0; -} - - -/* - * index into rates for control rates, we can set it up like this because - * this is only used for AR5212 and we know it supports G mode - */ -static int control_rates[] = - { 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 }; - -/** - * ath5k_hw_write_rate_duration - set rate duration during hw resets - * - * @ah: the &struct ath5k_hw - * @mode: one of enum ath5k_driver_mode - * - * Write the rate duration table upon hw reset. This is a helper for - * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout for - * the hardware for the current mode for each rate. The rates which are capable - * of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have another - * register for the short preamble ACK timeout calculation. - */ -static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, - unsigned int mode) -{ - struct ath5k_softc *sc = ah->ah_sc; - struct ieee80211_rate *rate; - unsigned int i; - - /* Write rate duration table */ - for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) { - u32 reg; - u16 tx_time; - - rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]]; - - /* Set ACK timeout */ - reg = AR5K_RATE_DUR(rate->hw_value); - - /* An ACK frame consists of 10 bytes. If you add the FCS, - * which ieee80211_generic_frame_duration() adds, - * its 14 bytes. Note we use the control rate and not the - * actual rate for this rate. See mac80211 tx.c - * ieee80211_duration() for a brief description of - * what rate we should choose to TX ACKs. */ - tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw, - sc->vif, 10, rate)); - - ath5k_hw_reg_write(ah, tx_time, reg); - - if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)) - continue; - - /* - * We're not distinguishing short preamble here, - * This is true, all we'll get is a longer value here - * which is not necessarilly bad. We could use - * export ieee80211_frame_duration() but that needs to be - * fixed first to be properly used by mac802111 drivers: - * - * - remove erp stuff and let the routine figure ofdm - * erp rates - * - remove passing argument ieee80211_local as - * drivers don't have access to it - * - move drivers using ieee80211_generic_frame_duration() - * to this - */ - ath5k_hw_reg_write(ah, tx_time, - reg + (AR5K_SET_SHORT_PREAMBLE << 2)); - } -} - -/* - * Reset chipset - */ -static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) -{ - int ret; - u32 mask = val ? val : ~0U; - - ATH5K_TRACE(ah->ah_sc); - - /* Read-and-clear RX Descriptor Pointer*/ - ath5k_hw_reg_read(ah, AR5K_RXDP); - - /* - * Reset the device and wait until success - */ - ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL); - - /* Wait at least 128 PCI clocks */ - udelay(15); - - if (ah->ah_version == AR5K_AR5210) { - val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA - | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY; - mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA - | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY; - } else { - val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; - mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; - } - - ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false); - - /* - * Reset configuration register (for hw byte-swap). Note that this - * is only set for big endian. We do the necessary magic in - * AR5K_INIT_CFG. - */ - if ((val & AR5K_RESET_CTL_PCU) == 0) - ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG); - - return ret; -} - -/* - * Sleep control - */ -int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, - bool set_chip, u16 sleep_duration) -{ - unsigned int i; - u32 staid, data; - - ATH5K_TRACE(ah->ah_sc); - staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1); - - switch (mode) { - case AR5K_PM_AUTO: - staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA; - /* fallthrough */ - case AR5K_PM_NETWORK_SLEEP: - if (set_chip) - ath5k_hw_reg_write(ah, - AR5K_SLEEP_CTL_SLE_ALLOW | - sleep_duration, - AR5K_SLEEP_CTL); - - staid |= AR5K_STA_ID1_PWR_SV; - break; - - case AR5K_PM_FULL_SLEEP: - if (set_chip) - ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP, - AR5K_SLEEP_CTL); - - staid |= AR5K_STA_ID1_PWR_SV; - break; - - case AR5K_PM_AWAKE: - - staid &= ~AR5K_STA_ID1_PWR_SV; - - if (!set_chip) - goto commit; - - /* Preserve sleep duration */ - data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL); - if (data & 0xffc00000) - data = 0; - else - data = data & 0xfffcffff; - - ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); - udelay(15); - - for (i = 50; i > 0; i--) { - /* Check if the chip did wake up */ - if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) & - AR5K_PCICFG_SPWR_DN) == 0) - break; - - /* Wait a bit and retry */ - udelay(200); - ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); - } - - /* Fail if the chip didn't wake up */ - if (i <= 0) - return -EIO; - - break; - - default: - return -EINVAL; - } - -commit: - ah->ah_power_mode = mode; - ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1); - - return 0; -} - -/* - * Bring up MAC + PHY Chips - */ -int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) -{ - struct pci_dev *pdev = ah->ah_sc->pdev; - u32 turbo, mode, clock, bus_flags; - int ret; - - turbo = 0; - mode = 0; - clock = 0; - - ATH5K_TRACE(ah->ah_sc); - - /* Wakeup the device */ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); - if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n"); - return ret; - } - - if (ah->ah_version != AR5K_AR5210) { - /* - * Get channel mode flags - */ - - if (ah->ah_radio >= AR5K_RF5112) { - mode = AR5K_PHY_MODE_RAD_RF5112; - clock = AR5K_PHY_PLL_RF5112; - } else { - mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/ - clock = AR5K_PHY_PLL_RF5111; /*Zero*/ - } - - if (flags & CHANNEL_2GHZ) { - mode |= AR5K_PHY_MODE_FREQ_2GHZ; - clock |= AR5K_PHY_PLL_44MHZ; - - if (flags & CHANNEL_CCK) { - mode |= AR5K_PHY_MODE_MOD_CCK; - } else if (flags & CHANNEL_OFDM) { - /* XXX Dynamic OFDM/CCK is not supported by the - * AR5211 so we set MOD_OFDM for plain g (no - * CCK headers) operation. We need to test - * this, 5211 might support ofdm-only g after - * all, there are also initial register values - * in the code for g mode (see initvals.c). */ - if (ah->ah_version == AR5K_AR5211) - mode |= AR5K_PHY_MODE_MOD_OFDM; - else - mode |= AR5K_PHY_MODE_MOD_DYN; - } else { - ATH5K_ERR(ah->ah_sc, - "invalid radio modulation mode\n"); - return -EINVAL; - } - } else if (flags & CHANNEL_5GHZ) { - mode |= AR5K_PHY_MODE_FREQ_5GHZ; - clock |= AR5K_PHY_PLL_40MHZ; - - if (flags & CHANNEL_OFDM) - mode |= AR5K_PHY_MODE_MOD_OFDM; - else { - ATH5K_ERR(ah->ah_sc, - "invalid radio modulation mode\n"); - return -EINVAL; - } - } else { - ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n"); - return -EINVAL; - } - - if (flags & CHANNEL_TURBO) - turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT; - } else { /* Reset the device */ - - /* ...enable Atheros turbo mode if requested */ - if (flags & CHANNEL_TURBO) - ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE, - AR5K_PHY_TURBO); - } - - /* reseting PCI on PCI-E cards results card to hang - * and always return 0xffff... so we ingore that flag - * for PCI-E cards */ - bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI; - - /* Reset chipset */ - if (ah->ah_version == AR5K_AR5210) { - ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | - AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | - AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); - mdelay(2); - } else { - ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | - AR5K_RESET_CTL_BASEBAND | bus_flags); - } - if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n"); - return -EIO; - } - - /* ...wakeup again!*/ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); - if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n"); - return ret; - } - - /* ...final warm reset */ - if (ath5k_hw_nic_reset(ah, 0)) { - ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n"); - return -EIO; - } - - if (ah->ah_version != AR5K_AR5210) { - /* ...set the PHY operating mode */ - ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL); - udelay(300); - - ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE); - ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO); - } - - return 0; -} - -/* - * Main reset function - */ -int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, - struct ieee80211_channel *channel, bool change_channel) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - struct pci_dev *pdev = ah->ah_sc->pdev; - u32 data, s_seq, s_ant, s_led[3], dma_size; - unsigned int i, mode, freq, ee_mode, ant[2]; - int ret; - - ATH5K_TRACE(ah->ah_sc); - - s_seq = 0; - s_ant = 0; - ee_mode = 0; - freq = 0; - mode = 0; - - /* - * Save some registers before a reset - */ - /*DCU/Antenna selection not available on 5210*/ - if (ah->ah_version != AR5K_AR5210) { - if (change_channel) { - /* Seq number for queue 0 -do this for all queues ? */ - s_seq = ath5k_hw_reg_read(ah, - AR5K_QUEUE_DFS_SEQNUM(0)); - /*Default antenna*/ - s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA); - } - } - - /*GPIOs*/ - s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE; - s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR); - s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO); - - if (change_channel && ah->ah_rf_banks != NULL) - ath5k_hw_get_rf_gain(ah); - - - /*Wakeup the device*/ - ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false); - if (ret) - return ret; - - /* - * Initialize operating mode - */ - ah->ah_op_mode = op_mode; - - /* - * 5111/5112 Settings - * 5210 only comes with RF5110 - */ - if (ah->ah_version != AR5K_AR5210) { - if (ah->ah_radio != AR5K_RF5111 && - ah->ah_radio != AR5K_RF5112 && - ah->ah_radio != AR5K_RF5413 && - ah->ah_radio != AR5K_RF2413 && - ah->ah_radio != AR5K_RF2425) { - ATH5K_ERR(ah->ah_sc, - "invalid phy radio: %u\n", ah->ah_radio); - return -EINVAL; - } - - switch (channel->hw_value & CHANNEL_MODES) { - case CHANNEL_A: - mode = AR5K_MODE_11A; - freq = AR5K_INI_RFGAIN_5GHZ; - ee_mode = AR5K_EEPROM_MODE_11A; - break; - case CHANNEL_G: - mode = AR5K_MODE_11G; - freq = AR5K_INI_RFGAIN_2GHZ; - ee_mode = AR5K_EEPROM_MODE_11G; - break; - case CHANNEL_B: - mode = AR5K_MODE_11B; - freq = AR5K_INI_RFGAIN_2GHZ; - ee_mode = AR5K_EEPROM_MODE_11B; - break; - case CHANNEL_T: - mode = AR5K_MODE_11A_TURBO; - freq = AR5K_INI_RFGAIN_5GHZ; - ee_mode = AR5K_EEPROM_MODE_11A; - break; - /*Is this ok on 5211 too ?*/ - case CHANNEL_TG: - mode = AR5K_MODE_11G_TURBO; - freq = AR5K_INI_RFGAIN_2GHZ; - ee_mode = AR5K_EEPROM_MODE_11G; - break; - case CHANNEL_XR: - if (ah->ah_version == AR5K_AR5211) { - ATH5K_ERR(ah->ah_sc, - "XR mode not available on 5211"); - return -EINVAL; - } - mode = AR5K_MODE_XR; - freq = AR5K_INI_RFGAIN_5GHZ; - ee_mode = AR5K_EEPROM_MODE_11A; - break; - default: - ATH5K_ERR(ah->ah_sc, - "invalid channel: %d\n", channel->center_freq); - return -EINVAL; - } - - /* PHY access enable */ - ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); - - } - - ret = ath5k_hw_write_initvals(ah, mode, change_channel); - if (ret) - return ret; - - /* - * 5211/5212 Specific - */ - if (ah->ah_version != AR5K_AR5210) { - /* - * Write initial RF gain settings - * This should work for both 5111/5112 - */ - ret = ath5k_hw_rfgain(ah, freq); - if (ret) - return ret; - - mdelay(1); - - /* - * Write some more initial register settings for revised chips - */ - if (ah->ah_version == AR5K_AR5212 && - ah->ah_phy_revision > 0x41) { - ath5k_hw_reg_write(ah, 0x0002a002, 0x982c); - - if (channel->hw_value == CHANNEL_G) - if (ah->ah_mac_srev < AR5K_SREV_AR2413) - ath5k_hw_reg_write(ah, 0x00f80d80, - 0x994c); - else if (ah->ah_mac_srev < AR5K_SREV_AR5424) - ath5k_hw_reg_write(ah, 0x00380140, - 0x994c); - else if (ah->ah_mac_srev < AR5K_SREV_AR2425) - ath5k_hw_reg_write(ah, 0x00fc0ec0, - 0x994c); - else /* 2425 */ - ath5k_hw_reg_write(ah, 0x00fc0fc0, - 0x994c); - else - ath5k_hw_reg_write(ah, 0x00000000, 0x994c); - - /* Got this from legacy-hal */ - AR5K_REG_DISABLE_BITS(ah, 0xa228, 0x200); - - AR5K_REG_MASKED_BITS(ah, 0xa228, 0x800, 0xfffe03ff); - - /* Just write 0x9b5 ? */ - /* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */ - ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK); - ath5k_hw_reg_write(ah, 0x00000000, 0xa254); - ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL); - } - - /* Fix for first revision of the RF5112 RF chipset */ - if (ah->ah_radio >= AR5K_RF5112 && - ah->ah_radio_5ghz_revision < - AR5K_SREV_RAD_5112A) { - ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD, - AR5K_PHY_CCKTXCTL); - if (channel->hw_value & CHANNEL_5GHZ) - data = 0xffb81020; - else - data = 0xffb80d20; - ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); - data = 0; - } - - /* - * Set TX power (FIXME) - */ - ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER); - if (ret) - return ret; - - /* Write rate duration table only on AR5212 and if - * virtual interface has already been brought up - * XXX: rethink this after new mode changes to - * mac80211 are integrated */ - if (ah->ah_version == AR5K_AR5212 && - ah->ah_sc->vif != NULL) - ath5k_hw_write_rate_duration(ah, mode); - - /* - * Write RF registers - */ - ret = ath5k_hw_rfregs(ah, channel, mode); - if (ret) - return ret; - - /* - * Configure additional registers - */ - - /* Write OFDM timings on 5212*/ - if (ah->ah_version == AR5K_AR5212 && - channel->hw_value & CHANNEL_OFDM) { - ret = ath5k_hw_write_ofdm_timings(ah, channel); - if (ret) - return ret; - } - - /*Enable/disable 802.11b mode on 5111 - (enable 2111 frequency converter + CCK)*/ - if (ah->ah_radio == AR5K_RF5111) { - if (mode == AR5K_MODE_11B) - AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_B_MODE); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_B_MODE); - } - - /* - * Set channel and calibrate the PHY - */ - ret = ath5k_hw_channel(ah, channel); - if (ret) - return ret; - - /* Set antenna mode */ - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL, - ah->ah_antenna[ee_mode][0], 0xfffffc06); - - /* - * In case a fixed antenna was set as default - * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE - * registers. - */ - if (s_ant != 0) { - if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */ - ant[0] = ant[1] = AR5K_ANT_FIXED_A; - else /* 2 - Aux */ - ant[0] = ant[1] = AR5K_ANT_FIXED_B; - } else { - ant[0] = AR5K_ANT_FIXED_A; - ant[1] = AR5K_ANT_FIXED_B; - } - - ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]], - AR5K_PHY_ANT_SWITCH_TABLE_0); - ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]], - AR5K_PHY_ANT_SWITCH_TABLE_1); - - /* Commit values from EEPROM */ - if (ah->ah_radio == AR5K_RF5111) - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL, - AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip); - - ath5k_hw_reg_write(ah, - AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]), - AR5K_PHY_NFTHRES); - - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING, - (ee->ee_switch_settling[ee_mode] << 7) & 0x3f80, - 0xffffc07f); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN, - (ee->ee_atn_tx_rx[ee_mode] << 12) & 0x3f000, - 0xfffc0fff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE, - (ee->ee_adc_desired_size[ee_mode] & 0x00ff) | - ((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00), - 0xffff0000); - - ath5k_hw_reg_write(ah, - (ee->ee_tx_end2xpa_disable[ee_mode] << 24) | - (ee->ee_tx_end2xpa_disable[ee_mode] << 16) | - (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) | - (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4); - - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3, - ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF, - (ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01); - - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_CORR_ENABLE | - (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) | - ee->ee_q_cal[ee_mode]); - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ, - AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX, - ee->ee_margin_tx_rx[ee_mode]); - - } else { - mdelay(1); - /* Disable phy and wait */ - ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); - mdelay(1); - } - - /* - * Restore saved values - */ - /*DCU/Antenna selection not available on 5210*/ - if (ah->ah_version != AR5K_AR5210) { - ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0)); - ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA); - } - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]); - ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR); - ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO); - - /* - * Misc - */ - /* XXX: add ah->aid once mac80211 gives this to us */ - ath5k_hw_set_associd(ah, ah->ah_bssid, 0); - - ath5k_hw_set_opmode(ah); - /*PISR/SISR Not available on 5210*/ - if (ah->ah_version != AR5K_AR5210) { - ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR); - /* If we later allow tuning for this, store into sc structure */ - data = AR5K_TUNE_RSSI_THRES | - AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S; - ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR); - } - - /* - * Set Rx/Tx DMA Configuration - * - * Set maximum DMA size (512) except for PCI-E cards since - * it causes rx overruns and tx errors (tested on 5424 but since - * rx overruns also occur on 5416/5418 with madwifi we set 128 - * for all PCI-E cards to be safe). - * - * In dumps this is 128 for allchips. - * - * XXX: need to check 5210 for this - * TODO: Check out tx triger level, it's always 64 on dumps but I - * guess we can tweak it and see how it goes ;-) - */ - dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B; - if (ah->ah_version != AR5K_AR5210) { - AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_SDMAMR, dma_size); - AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, - AR5K_RXCFG_SDMAMW, dma_size); - } - - /* - * Enable the PHY and wait until completion - */ - ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); - - /* - * On 5211+ read activation -> rx delay - * and use it. - */ - if (ah->ah_version != AR5K_AR5210) { - data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & - AR5K_PHY_RX_DELAY_M; - data = (channel->hw_value & CHANNEL_CCK) ? - ((data << 2) / 22) : (data / 10); - - udelay(100 + (2 * data)); - data = 0; - } else { - mdelay(1); - } - - /* - * Perform ADC test (?) - */ - data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); - ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); - for (i = 0; i <= 20; i++) { - if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) - break; - udelay(200); - } - ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1); - data = 0; - - /* - * Start automatic gain calibration - * - * During AGC calibration RX path is re-routed to - * a signal detector so we don't receive anything. - * - * This method is used to calibrate some static offsets - * used together with on-the fly I/Q calibration (the - * one performed via ath5k_hw_phy_calibrate), that doesn't - * interrupt rx path. - * - * If we are in a noisy environment AGC calibration may time - * out. - */ - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, - AR5K_PHY_AGCCTL_CAL); - - /* At the same time start I/Q calibration for QAM constellation - * -no need for CCK- */ - ah->ah_calibration = false; - if (!(mode == AR5K_MODE_11B)) { - ah->ah_calibration = true; - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_RUN); - } - - /* Wait for gain calibration to finish (we check for I/Q calibration - * during ath5k_phy_calibrate) */ - if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, - AR5K_PHY_AGCCTL_CAL, 0, false)) { - ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n", - channel->center_freq); - return -EAGAIN; - } - - /* - * Start noise floor calibration - * - * If we run NF calibration before AGC, it always times out. - * Binary HAL starts NF and AGC calibration at the same time - * and only waits for AGC to finish. I believe that's wrong because - * during NF calibration, rx path is also routed to a detector, so if - * it doesn't finish we won't have RX. - * - * XXX: Find an interval that's OK for all cards... - */ - ath5k_hw_noise_floor_calibration(ah, channel->center_freq); - - /* - * Reset queues and start beacon timers at the end of the reset routine - */ - for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) { - /*No QCU on 5210*/ - if (ah->ah_version != AR5K_AR5210) - AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i); - - ret = ath5k_hw_reset_tx_queue(ah, i); - if (ret) { - ATH5K_ERR(ah->ah_sc, - "failed to reset TX queue #%d\n", i); - return ret; - } - } - - /* Pre-enable interrupts on 5211/5212*/ - if (ah->ah_version != AR5K_AR5210) - ath5k_hw_set_imr(ah, ah->ah_imr); - - /* - * Set RF kill flags if supported by the device (read from the EEPROM) - * Disable gpio_intr for now since it results system hang. - * TODO: Handle this in ath5k_intr - */ -#if 0 - if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) { - ath5k_hw_set_gpio_input(ah, 0); - ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0); - if (ah->ah_gpio[0] == 0) - ath5k_hw_set_gpio_intr(ah, 0, 1); - else - ath5k_hw_set_gpio_intr(ah, 0, 0); - } -#endif - - /* - * Set the 32MHz reference clock on 5212 phy clock sleep register - * - * TODO: Find out how to switch to external 32Khz clock to save power - */ - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR); - ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT); - ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL); - ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); - ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); - ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING); - - data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ; - data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ? - 0x00000f80 : 0x00001380 ; - ath5k_hw_reg_write(ah, data, AR5K_USEC_5211); - data = 0; - } - - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, 0x000100aa, 0x8118); - ath5k_hw_reg_write(ah, 0x00003210, 0x811c); - ath5k_hw_reg_write(ah, 0x00000052, 0x8108); - if (ah->ah_mac_srev >= AR5K_SREV_AR2413) - ath5k_hw_reg_write(ah, 0x00000004, 0x8120); - } - - /* - * Disable beacons and reset the register - */ - AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE | - AR5K_BEACON_RESET_TSF); - - return 0; -} - -#undef _ATH5K_RESET |