diff options
Diffstat (limited to 'drivers/net/wireless/ath5k/ath5k.h')
| -rw-r--r-- | drivers/net/wireless/ath5k/ath5k.h | 1163 |
1 files changed, 0 insertions, 1163 deletions
diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h deleted file mode 100644 index ba35c30d203..00000000000 --- a/drivers/net/wireless/ath5k/ath5k.h +++ /dev/null @@ -1,1163 +0,0 @@ -/* - * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _ATH5K_H -#define _ATH5K_H - -/* Set this to 1 to disable regulatory domain restrictions for channel tests. - * WARNING: This is for debuging only and has side effects (eg. scan takes too - * long and results timeouts). It's also illegal to tune to some of the - * supported frequencies in some countries, so use this at your own risk, - * you've been warned. */ -#define CHAN_DEBUG 0 - -#include <linux/io.h> -#include <linux/types.h> -#include <net/mac80211.h> - -#include "hw.h" - -/* PCI IDs */ -#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ -#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ -#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ -#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ -#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ -#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ -#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ -#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ -#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ -#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ -#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ -#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ - -/****************************\ - GENERIC DRIVER DEFINITIONS -\****************************/ - -#define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__) - -#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ - printk(_level "ath5k %s: " _fmt, \ - ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \ - ##__VA_ARGS__) - -#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \ - if (net_ratelimit()) \ - ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ - } while (0) - -#define ATH5K_INFO(_sc, _fmt, ...) \ - ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__) - -#define ATH5K_WARN(_sc, _fmt, ...) \ - ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__) - -#define ATH5K_ERR(_sc, _fmt, ...) \ - ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) - -/* - * Some tuneable values (these should be changeable by the user) - */ -#define AR5K_TUNE_DMA_BEACON_RESP 2 -#define AR5K_TUNE_SW_BEACON_RESP 10 -#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 -#define AR5K_TUNE_RADAR_ALERT false -#define AR5K_TUNE_MIN_TX_FIFO_THRES 1 -#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_LEN / 64) + 1) -#define AR5K_TUNE_REGISTER_TIMEOUT 20000 -/* Register for RSSI threshold has a mask of 0xff, so 255 seems to - * be the max value. */ -#define AR5K_TUNE_RSSI_THRES 129 -/* This must be set when setting the RSSI threshold otherwise it can - * prevent a reset. If AR5K_RSSI_THR is read after writing to it - * the BMISS_THRES will be seen as 0, seems harware doesn't keep - * track of it. Max value depends on harware. For AR5210 this is just 7. - * For AR5211+ this seems to be up to 255. */ -#define AR5K_TUNE_BMISS_THRES 7 -#define AR5K_TUNE_REGISTER_DWELL_TIME 20000 -#define AR5K_TUNE_BEACON_INTERVAL 100 -#define AR5K_TUNE_AIFS 2 -#define AR5K_TUNE_AIFS_11B 2 -#define AR5K_TUNE_AIFS_XR 0 -#define AR5K_TUNE_CWMIN 15 -#define AR5K_TUNE_CWMIN_11B 31 -#define AR5K_TUNE_CWMIN_XR 3 -#define AR5K_TUNE_CWMAX 1023 -#define AR5K_TUNE_CWMAX_11B 1023 -#define AR5K_TUNE_CWMAX_XR 7 -#define AR5K_TUNE_NOISE_FLOOR -72 -#define AR5K_TUNE_MAX_TXPOWER 60 -#define AR5K_TUNE_DEFAULT_TXPOWER 30 -#define AR5K_TUNE_TPC_TXPOWER true -#define AR5K_TUNE_ANT_DIVERSITY true -#define AR5K_TUNE_HWTXTRIES 4 - -/* token to use for aifs, cwmin, cwmax in MadWiFi */ -#define AR5K_TXQ_USEDEFAULT ((u32) -1) - -/* GENERIC CHIPSET DEFINITIONS */ - -/* MAC Chips */ -enum ath5k_version { - AR5K_AR5210 = 0, - AR5K_AR5211 = 1, - AR5K_AR5212 = 2, -}; - -/* PHY Chips */ -enum ath5k_radio { - AR5K_RF5110 = 0, - AR5K_RF5111 = 1, - AR5K_RF5112 = 2, - AR5K_RF2413 = 3, - AR5K_RF5413 = 4, - AR5K_RF2425 = 5, -}; - -/* - * Common silicon revision/version values - */ - -enum ath5k_srev_type { - AR5K_VERSION_VER, - AR5K_VERSION_RAD, -}; - -struct ath5k_srev_name { - const char *sr_name; - enum ath5k_srev_type sr_type; - u_int sr_val; -}; - -#define AR5K_SREV_UNKNOWN 0xffff - -#define AR5K_SREV_VER_AR5210 0x00 -#define AR5K_SREV_VER_AR5311 0x10 -#define AR5K_SREV_VER_AR5311A 0x20 -#define AR5K_SREV_VER_AR5311B 0x30 -#define AR5K_SREV_VER_AR5211 0x40 -#define AR5K_SREV_VER_AR5212 0x50 -#define AR5K_SREV_VER_AR5213 0x55 -#define AR5K_SREV_VER_AR5213A 0x59 -#define AR5K_SREV_VER_AR2413 0x78 -#define AR5K_SREV_VER_AR2414 0x79 -#define AR5K_SREV_VER_AR2424 0xa0 /* PCI-E */ -#define AR5K_SREV_VER_AR5424 0xa3 /* PCI-E */ -#define AR5K_SREV_VER_AR5413 0xa4 -#define AR5K_SREV_VER_AR5414 0xa5 -#define AR5K_SREV_VER_AR5416 0xc0 /* PCI-E */ -#define AR5K_SREV_VER_AR5418 0xca /* PCI-E */ -#define AR5K_SREV_VER_AR2425 0xe2 /* PCI-E */ - -#define AR5K_SREV_RAD_5110 0x00 -#define AR5K_SREV_RAD_5111 0x10 -#define AR5K_SREV_RAD_5111A 0x15 -#define AR5K_SREV_RAD_2111 0x20 -#define AR5K_SREV_RAD_5112 0x30 -#define AR5K_SREV_RAD_5112A 0x35 -#define AR5K_SREV_RAD_2112 0x40 -#define AR5K_SREV_RAD_2112A 0x45 -#define AR5K_SREV_RAD_SC0 0x56 /* Found on 2413/2414 */ -#define AR5K_SREV_RAD_SC1 0x63 /* Found on 5413/5414 */ -#define AR5K_SREV_RAD_SC2 0xa2 /* Found on 2424-5/5424 */ -#define AR5K_SREV_RAD_5133 0xc0 /* MIMO found on 5418 */ - -/* IEEE defs */ - -#define IEEE80211_MAX_LEN 2500 - -/* TODO add support to mac80211 for vendor-specific rates and modes */ - -/* - * Some of this information is based on Documentation from: - * - * http://madwifi.org/wiki/ChipsetFeatures/SuperAG - * - * Modulation for Atheros' eXtended Range - range enhancing extension that is - * supposed to double the distance an Atheros client device can keep a - * connection with an Atheros access point. This is achieved by increasing - * the receiver sensitivity up to, -105dBm, which is about 20dB above what - * the 802.11 specifications demand. In addition, new (proprietary) data rates - * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. - * - * Please note that can you either use XR or TURBO but you cannot use both, - * they are exclusive. - * - */ -#define MODULATION_XR 0x00000200 -/* - * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a - * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s - * signaling rate achieved through the bonding of two 54Mbit/s 802.11g - * channels. To use this feature your Access Point must also suport it. - * There is also a distinction between "static" and "dynamic" turbo modes: - * - * - Static: is the dumb version: devices set to this mode stick to it until - * the mode is turned off. - * - Dynamic: is the intelligent version, the network decides itself if it - * is ok to use turbo. As soon as traffic is detected on adjacent channels - * (which would get used in turbo mode), or when a non-turbo station joins - * the network, turbo mode won't be used until the situation changes again. - * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which - * monitors the used radio band in order to decide whether turbo mode may - * be used or not. - * - * This article claims Super G sticks to bonding of channels 5 and 6 for - * USA: - * - * http://www.pcworld.com/article/id,113428-page,1/article.html - * - * The channel bonding seems to be driver specific though. In addition to - * deciding what channels will be used, these "Turbo" modes are accomplished - * by also enabling the following features: - * - * - Bursting: allows multiple frames to be sent at once, rather than pausing - * after each frame. Bursting is a standards-compliant feature that can be - * used with any Access Point. - * - Fast frames: increases the amount of information that can be sent per - * frame, also resulting in a reduction of transmission overhead. It is a - * proprietary feature that needs to be supported by the Access Point. - * - Compression: data frames are compressed in real time using a Lempel Ziv - * algorithm. This is done transparently. Once this feature is enabled, - * compression and decompression takes place inside the chipset, without - * putting additional load on the host CPU. - * - */ -#define MODULATION_TURBO 0x00000080 - -enum ath5k_driver_mode { - AR5K_MODE_11A = 0, - AR5K_MODE_11A_TURBO = 1, - AR5K_MODE_11B = 2, - AR5K_MODE_11G = 3, - AR5K_MODE_11G_TURBO = 4, - AR5K_MODE_XR = 0, - AR5K_MODE_MAX = 5 -}; - -/* adding this flag to rate_code enables short preamble, see ar5212_reg.h */ -#define AR5K_SET_SHORT_PREAMBLE 0x04 - -#define HAS_SHPREAMBLE(_ix) \ - (rt->rates[_ix].modulation == IEEE80211_RATE_SHORT_PREAMBLE) -#define SHPREAMBLE_FLAG(_ix) \ - (HAS_SHPREAMBLE(_ix) ? AR5K_SET_SHORT_PREAMBLE : 0) - - -/****************\ - TX DEFINITIONS -\****************/ - -/* - * TX Status - */ -struct ath5k_tx_status { - u16 ts_seqnum; - u16 ts_tstamp; - u8 ts_status; - u8 ts_rate; - s8 ts_rssi; - u8 ts_shortretry; - u8 ts_longretry; - u8 ts_virtcol; - u8 ts_antenna; -}; - -#define AR5K_TXSTAT_ALTRATE 0x80 -#define AR5K_TXERR_XRETRY 0x01 -#define AR5K_TXERR_FILT 0x02 -#define AR5K_TXERR_FIFO 0x04 - -/** - * enum ath5k_tx_queue - Queue types used to classify tx queues. - * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue - * @AR5K_TX_QUEUE_DATA: A normal data queue - * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue - * @AR5K_TX_QUEUE_BEACON: The beacon queue - * @AR5K_TX_QUEUE_CAB: The after-beacon queue - * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue - */ -enum ath5k_tx_queue { - AR5K_TX_QUEUE_INACTIVE = 0, - AR5K_TX_QUEUE_DATA, - AR5K_TX_QUEUE_XR_DATA, - AR5K_TX_QUEUE_BEACON, - AR5K_TX_QUEUE_CAB, - AR5K_TX_QUEUE_UAPSD, -}; - -#define AR5K_NUM_TX_QUEUES 10 -#define AR5K_NUM_TX_QUEUES_NOQCU 2 - -/* - * Queue syb-types to classify normal data queues. - * These are the 4 Access Categories as defined in - * WME spec. 0 is the lowest priority and 4 is the - * highest. Normal data that hasn't been classified - * goes to the Best Effort AC. - */ -enum ath5k_tx_queue_subtype { - AR5K_WME_AC_BK = 0, /*Background traffic*/ - AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/ - AR5K_WME_AC_VI, /*Video traffic*/ - AR5K_WME_AC_VO, /*Voice traffic*/ -}; - -/* - * Queue ID numbers as returned by the hw functions, each number - * represents a hw queue. If hw does not support hw queues - * (eg 5210) all data goes in one queue. These match - * d80211 definitions (net80211/MadWiFi don't use them). - */ -enum ath5k_tx_queue_id { - AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, - AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, - AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/ - AR5K_TX_QUEUE_ID_DATA_MAX = 4, /*IEEE80211_TX_QUEUE_DATA4*/ - AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/ - AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/ - AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/ - AR5K_TX_QUEUE_ID_UAPSD = 8, - AR5K_TX_QUEUE_ID_XR_DATA = 9, -}; - - -/* - * Flags to set hw queue's parameters... - */ -#define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */ -#define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */ -#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */ -#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */ -#define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */ -#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0020 /* Disable random post-backoff */ -#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0040 /* Enable ready time expiry policy (?)*/ -#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0080 /* Enable backoff while bursting */ -#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x0100 /* Disable backoff while bursting */ -#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x0200 /* Enable hw compression -not implemented-*/ - -/* - * A struct to hold tx queue's parameters - */ -struct ath5k_txq_info { - enum ath5k_tx_queue tqi_type; - enum ath5k_tx_queue_subtype tqi_subtype; - u16 tqi_flags; /* Tx queue flags (see above) */ - u32 tqi_aifs; /* Arbitrated Interframe Space */ - s32 tqi_cw_min; /* Minimum Contention Window */ - s32 tqi_cw_max; /* Maximum Contention Window */ - u32 tqi_cbr_period; /* Constant bit rate period */ - u32 tqi_cbr_overflow_limit; - u32 tqi_burst_time; - u32 tqi_ready_time; /* Not used */ -}; - -/* - * Transmit packet types. - * These are not fully used inside OpenHAL yet - */ -enum ath5k_pkt_type { - AR5K_PKT_TYPE_NORMAL = 0, - AR5K_PKT_TYPE_ATIM = 1, - AR5K_PKT_TYPE_PSPOLL = 2, - AR5K_PKT_TYPE_BEACON = 3, - AR5K_PKT_TYPE_PROBE_RESP = 4, - AR5K_PKT_TYPE_PIFS = 5, -}; - -/* - * TX power and TPC settings - */ -#define AR5K_TXPOWER_OFDM(_r, _v) ( \ - ((0 & 1) << ((_v) + 6)) | \ - (((ah->ah_txpower.txp_rates[(_r)]) & 0x3f) << (_v)) \ -) - -#define AR5K_TXPOWER_CCK(_r, _v) ( \ - (ah->ah_txpower.txp_rates[(_r)] & 0x3f) << (_v) \ -) - -/* - * DMA size definitions (2^n+2) - */ -enum ath5k_dmasize { - AR5K_DMASIZE_4B = 0, - AR5K_DMASIZE_8B, - AR5K_DMASIZE_16B, - AR5K_DMASIZE_32B, - AR5K_DMASIZE_64B, - AR5K_DMASIZE_128B, - AR5K_DMASIZE_256B, - AR5K_DMASIZE_512B -}; - - -/****************\ - RX DEFINITIONS -\****************/ - -/* - * RX Status - */ -struct ath5k_rx_status { - u16 rs_datalen; - u16 rs_tstamp; - u8 rs_status; - u8 rs_phyerr; - s8 rs_rssi; - u8 rs_keyix; - u8 rs_rate; - u8 rs_antenna; - u8 rs_more; -}; - -#define AR5K_RXERR_CRC 0x01 -#define AR5K_RXERR_PHY 0x02 -#define AR5K_RXERR_FIFO 0x04 -#define AR5K_RXERR_DECRYPT 0x08 -#define AR5K_RXERR_MIC 0x10 -#define AR5K_RXKEYIX_INVALID ((u8) - 1) -#define AR5K_TXKEYIX_INVALID ((u32) - 1) - - -/**************************\ - BEACON TIMERS DEFINITIONS -\**************************/ - -#define AR5K_BEACON_PERIOD 0x0000ffff -#define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/ -#define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/ - -#if 0 -/** - * struct ath5k_beacon_state - Per-station beacon timer state. - * @bs_interval: in TU's, can also include the above flags - * @bs_cfp_max_duration: if non-zero hw is setup to coexist with a - * Point Coordination Function capable AP - */ -struct ath5k_beacon_state { - u32 bs_next_beacon; - u32 bs_next_dtim; - u32 bs_interval; - u8 bs_dtim_period; - u8 bs_cfp_period; - u16 bs_cfp_max_duration; - u16 bs_cfp_du_remain; - u16 bs_tim_offset; - u16 bs_sleep_duration; - u16 bs_bmiss_threshold; - u32 bs_cfp_next; -}; -#endif - - -/* - * TSF to TU conversion: - * - * TSF is a 64bit value in usec (microseconds). - * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of - * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024). - */ -#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) - - -/********************\ - COMMON DEFINITIONS -\********************/ - -/* - * Atheros hardware descriptor - * This is read and written to by the hardware - */ -struct ath5k_desc { - u32 ds_link; /* physical address of the next descriptor */ - u32 ds_data; /* physical address of data buffer (skb) */ - - union { - struct ath5k_hw_5210_tx_desc ds_tx5210; - struct ath5k_hw_5212_tx_desc ds_tx5212; - struct ath5k_hw_all_rx_desc ds_rx; - } ud; -} __packed; - -#define AR5K_RXDESC_INTREQ 0x0020 - -#define AR5K_TXDESC_CLRDMASK 0x0001 -#define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/ -#define AR5K_TXDESC_RTSENA 0x0004 -#define AR5K_TXDESC_CTSENA 0x0008 -#define AR5K_TXDESC_INTREQ 0x0010 -#define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/ - -#define AR5K_SLOT_TIME_9 396 -#define AR5K_SLOT_TIME_20 880 -#define AR5K_SLOT_TIME_MAX 0xffff - -/* channel_flags */ -#define CHANNEL_CW_INT 0x0008 /* Contention Window interference detected */ -#define CHANNEL_TURBO 0x0010 /* Turbo Channel */ -#define CHANNEL_CCK 0x0020 /* CCK channel */ -#define CHANNEL_OFDM 0x0040 /* OFDM channel */ -#define CHANNEL_2GHZ 0x0080 /* 2GHz channel. */ -#define CHANNEL_5GHZ 0x0100 /* 5GHz channel */ -#define CHANNEL_PASSIVE 0x0200 /* Only passive scan allowed */ -#define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */ -#define CHANNEL_XR 0x0800 /* XR channel */ - -#define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM) -#define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK) -#define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM) -#define CHANNEL_T (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO) -#define CHANNEL_TG (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO) -#define CHANNEL_108A CHANNEL_T -#define CHANNEL_108G CHANNEL_TG -#define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR) - -#define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \ - CHANNEL_TURBO) - -#define CHANNEL_ALL_NOTURBO (CHANNEL_ALL & ~CHANNEL_TURBO) -#define CHANNEL_MODES CHANNEL_ALL - -/* - * Used internaly in OpenHAL (ar5211.c/ar5212.c - * for reset_tx_queue). Also see struct struct ieee80211_channel. - */ -#define IS_CHAN_XR(_c) ((_c.hw_value & CHANNEL_XR) != 0) -#define IS_CHAN_B(_c) ((_c.hw_value & CHANNEL_B) != 0) - -/* - * The following structure will be used to map 2GHz channels to - * 5GHz Atheros channels. - */ -struct ath5k_athchan_2ghz { - u32 a2_flags; - u16 a2_athchan; -}; - -/* - * Rate definitions - * TODO: Clean them up or move them on mac80211 -most of these infos are - * used by the rate control algorytm on MadWiFi. - */ - -/* Max number of rates on the rate table and what it seems - * Atheros hardware supports */ -#define AR5K_MAX_RATES 32 - -/** - * struct ath5k_rate - rate structure - * @valid: is this a valid rate for rate control (remove) - * @modulation: respective mac80211 modulation - * @rate_kbps: rate in kbit/s - * @rate_code: hardware rate value, used in &struct ath5k_desc, on RX on - * &struct ath5k_rx_status.rs_rate and on TX on - * &struct ath5k_tx_status.ts_rate. Seems the ar5xxx harware supports - * up to 32 rates, indexed by 1-32. This means we really only need - * 6 bits for the rate_code. - * @dot11_rate: respective IEEE-802.11 rate value - * @control_rate: index of rate assumed to be used to send control frames. - * This can be used to set override the value on the rate duration - * registers. This is only useful if we can override in the harware at - * what rate we want to send control frames at. Note that IEEE-802.11 - * Ch. 9.6 (after IEEE 802.11g changes) defines the rate at which we - * should send ACK/CTS, if we change this value we can be breaking - * the spec. - * - * This structure is used to get the RX rate or set the TX rate on the - * hardware descriptors. It is also used for internal modulation control - * and settings. - * - * On RX after the &struct ath5k_desc is parsed by the appropriate - * ah_proc_rx_desc() the respective hardware rate value is set in - * &struct ath5k_rx_status.rs_rate. On TX the desired rate is set in - * &struct ath5k_tx_status.ts_rate which is later used to setup the - * &struct ath5k_desc correctly. This is the hardware rate map we are - * aware of: - * - * rate_code 1 2 3 4 5 6 7 8 - * rate_kbps 3000 1000 ? ? ? 2000 500 48000 - * - * rate_code 9 10 11 12 13 14 15 16 - * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ? - * - * rate_code 17 18 19 20 21 22 23 24 - * rate_kbps ? ? ? ? ? ? ? 11000 - * - * rate_code 25 26 27 28 29 30 31 32 - * rate_kbps 5500 2000 1000 ? ? ? ? ? - * - */ -struct ath5k_rate { - u8 valid; - u32 modulation; - u16 rate_kbps; - u8 rate_code; - u8 dot11_rate; - u8 control_rate; -}; - -/* XXX: GRR all this stuff to get leds blinking ??? (check out setcurmode) */ -struct ath5k_rate_table { - u16 rate_count; - u8 rate_code_to_index[AR5K_MAX_RATES]; /* Back-mapping */ - struct ath5k_rate rates[AR5K_MAX_RATES]; -}; - -/* - * Rate tables... - * TODO: CLEAN THIS !!! - */ -#define AR5K_RATES_11A { 8, { \ - 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \ - 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \ - 255, 255, 255, 255, 255, 255, 255, 255 }, { \ - { 1, 0, 6000, 11, 140, 0 }, \ - { 1, 0, 9000, 15, 18, 0 }, \ - { 1, 0, 12000, 10, 152, 2 }, \ - { 1, 0, 18000, 14, 36, 2 }, \ - { 1, 0, 24000, 9, 176, 4 }, \ - { 1, 0, 36000, 13, 72, 4 }, \ - { 1, 0, 48000, 8, 96, 4 }, \ - { 1, 0, 54000, 12, 108, 4 } } \ -} - -#define AR5K_RATES_11B { 4, { \ - 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \ - 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \ - 3, 2, 1, 0, 255, 255, 255, 255 }, { \ - { 1, 0, 1000, 27, 130, 0 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 132, 1 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 139, 1 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 150, 1 } } \ -} - -#define AR5K_RATES_11G { 12, { \ - 255, 255, 255, 255, 255, 255, 255, 255, 10, 8, 6, 4, \ - 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \ - 3, 2, 1, 0, 255, 255, 255, 255 }, { \ - { 1, 0, 1000, 27, 2, 0 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 4, 1 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 11, 1 }, \ - { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 22, 1 }, \ - { 0, 0, 6000, 11, 12, 4 }, \ - { 0, 0, 9000, 15, 18, 4 }, \ - { 1, 0, 12000, 10, 24, 6 }, \ - { 1, 0, 18000, 14, 36, 6 }, \ - { 1, 0, 24000, 9, 48, 8 }, \ - { 1, 0, 36000, 13, 72, 8 }, \ - { 1, 0, 48000, 8, 96, 8 }, \ - { 1, 0, 54000, 12, 108, 8 } } \ -} - -#define AR5K_RATES_TURBO { 8, { \ - 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \ - 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \ - 255, 255, 255, 255, 255, 255, 255, 255 }, { \ - { 1, MODULATION_TURBO, 6000, 11, 140, 0 }, \ - { 1, MODULATION_TURBO, 9000, 15, 18, 0 }, \ - { 1, MODULATION_TURBO, 12000, 10, 152, 2 }, \ - { 1, MODULATION_TURBO, 18000, 14, 36, 2 }, \ - { 1, MODULATION_TURBO, 24000, 9, 176, 4 }, \ - { 1, MODULATION_TURBO, 36000, 13, 72, 4 }, \ - { 1, MODULATION_TURBO, 48000, 8, 96, 4 }, \ - { 1, MODULATION_TURBO, 54000, 12, 108, 4 } } \ -} - -#define AR5K_RATES_XR { 12, { \ - 255, 3, 1, 255, 255, 255, 2, 0, 10, 8, 6, 4, \ - 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \ - 255, 255, 255, 255, 255, 255, 255, 255 }, { \ - { 1, MODULATION_XR, 500, 7, 129, 0 }, \ - { 1, MODULATION_XR, 1000, 2, 139, 1 }, \ - { 1, MODULATION_XR, 2000, 6, 150, 2 }, \ - { 1, MODULATION_XR, 3000, 1, 150, 3 }, \ - { 1, 0, 6000, 11, 140, 4 }, \ - { 1, 0, 9000, 15, 18, 4 }, \ - { 1, 0, 12000, 10, 152, 6 }, \ - { 1, 0, 18000, 14, 36, 6 }, \ - { 1, 0, 24000, 9, 176, 8 }, \ - { 1, 0, 36000, 13, 72, 8 }, \ - { 1, 0, 48000, 8, 96, 8 }, \ - { 1, 0, 54000, 12, 108, 8 } } \ -} - -/* - * Crypto definitions - */ - -#define AR5K_KEYCACHE_SIZE 8 - -/***********************\ - HW RELATED DEFINITIONS -\***********************/ - -/* - * Misc definitions - */ -#define AR5K_RSSI_EP_MULTIPLIER (1<<7) - -#define AR5K_ASSERT_ENTRY(_e, _s) do { \ - if (_e >= _s) \ - return (false); \ -} while (0) - - -enum ath5k_ant_setting { - AR5K_ANT_VARIABLE = 0, /* variable by programming */ - AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */ - AR5K_ANT_FIXED_B = 2, /* fixed to 11b frequencies */ - AR5K_ANT_MAX = 3, -}; - -/* - * Hardware interrupt abstraction - */ - -/** - * enum ath5k_int - Hardware interrupt masks helpers - * - * @AR5K_INT_RX: mask to identify received frame interrupts, of type - * AR5K_ISR_RXOK or AR5K_ISR_RXERR - * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?) - * @AR5K_INT_RXNOFRM: No frame received (?) - * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The - * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's - * LinkPtr is NULL. For more details, refer to: - * http://www.freepatentsonline.com/20030225739.html - * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors). - * Note that Rx overrun is not always fatal, on some chips we can continue - * operation without reseting the card, that's why int_fatal is not - * common for all chips. - * @AR5K_INT_TX: mask to identify received frame interrupts, of type - * AR5K_ISR_TXOK or AR5K_ISR_TXERR - * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?) - * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold - * We currently do increments on interrupt by - * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2 - * @AR5K_INT_MIB: Indicates the Management Information Base counters should be - * checked. We should do this with ath5k_hw_update_mib_counters() but - * it seems we should also then do some noise immunity work. - * @AR5K_INT_RXPHY: RX PHY Error - * @AR5K_INT_RXKCM: ?? - * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a - * beacon that must be handled in software. The alternative is if you - * have VEOL support, in that case you let the hardware deal with things. - * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing - * beacons from the AP have associated with, we should probably try to - * reassociate. When in IBSS mode this might mean we have not received - * any beacons from any local stations. Note that every station in an - * IBSS schedules to send beacons at the Target Beacon Transmission Time - * (TBTT) with a random backoff. - * @AR5K_INT_BNR: Beacon Not Ready interrupt - ?? - * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now - * until properly handled - * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA - * errors. These types of errors we can enable seem to be of type - * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR. - * @AR5K_INT_GLOBAL: Seems to be used to clear and set the IER - * @AR5K_INT_NOCARD: signals the card has been removed - * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same - * bit value - * - * These are mapped to take advantage of some common bits - * between the MACs, to be able to set intr properties - * easier. Some of them are not used yet inside hw.c. Most map - * to the respective hw interrupt value as they are common amogst different - * MACs. - */ -enum ath5k_int { - AR5K_INT_RX = 0x00000001, /* Not common */ - AR5K_INT_RXDESC = 0x00000002, - AR5K_INT_RXNOFRM = 0x00000008, - AR5K_INT_RXEOL = 0x00000010, - AR5K_INT_RXORN = 0x00000020, - AR5K_INT_TX = 0x00000040, /* Not common */ - AR5K_INT_TXDESC = 0x00000080, - AR5K_INT_TXURN = 0x00000800, - AR5K_INT_MIB = 0x00001000, - AR5K_INT_RXPHY = 0x00004000, - AR5K_INT_RXKCM = 0x00008000, - AR5K_INT_SWBA = 0x00010000, - AR5K_INT_BMISS = 0x00040000, - AR5K_INT_BNR = 0x00100000, /* Not common */ - AR5K_INT_GPIO = 0x01000000, - AR5K_INT_FATAL = 0x40000000, /* Not common */ - AR5K_INT_GLOBAL = 0x80000000, - - AR5K_INT_COMMON = AR5K_INT_RXNOFRM - | AR5K_INT_RXDESC - | AR5K_INT_RXEOL - | AR5K_INT_RXORN - | AR5K_INT_TXURN - | AR5K_INT_TXDESC - | AR5K_INT_MIB - | AR5K_INT_RXPHY - | AR5K_INT_RXKCM - | AR5K_INT_SWBA - | AR5K_INT_BMISS - | AR5K_INT_GPIO, - AR5K_INT_NOCARD = 0xffffffff -}; - -/* - * Power management - */ -enum ath5k_power_mode { - AR5K_PM_UNDEFINED = 0, - AR5K_PM_AUTO, - AR5K_PM_AWAKE, - AR5K_PM_FULL_SLEEP, - AR5K_PM_NETWORK_SLEEP, -}; - -/* - * These match net80211 definitions (not used in - * d80211). - */ -#define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/ -#define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/ -#define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/ -#define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/ -#define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/ - -/* GPIO-controlled software LED */ -#define AR5K_SOFTLED_PIN 0 -#define AR5K_SOFTLED_ON 0 -#define AR5K_SOFTLED_OFF 1 - -/* - * Chipset capabilities -see ath5k_hw_get_capability- - * get_capability function is not yet fully implemented - * in OpenHAL so most of these don't work yet... - */ -enum ath5k_capability_type { - AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */ - AR5K_CAP_TKIP_MIC = 2, /* Can handle TKIP MIC in hardware */ - AR5K_CAP_TKIP_SPLIT = 3, /* TKIP uses split keys */ - AR5K_CAP_PHYCOUNTERS = 4, /* PHY error counters */ - AR5K_CAP_DIVERSITY = 5, /* Supports fast diversity */ - AR5K_CAP_NUM_TXQUEUES = 6, /* Used to get max number of hw txqueues */ - AR5K_CAP_VEOL = 7, /* Supports virtual EOL */ - AR5K_CAP_COMPRESSION = 8, /* Supports compression */ - AR5K_CAP_BURST = 9, /* Supports packet bursting */ - AR5K_CAP_FASTFRAME = 10, /* Supports fast frames */ - AR5K_CAP_TXPOW = 11, /* Used to get global tx power limit */ - AR5K_CAP_TPC = 12, /* Can do per-packet tx power control (needed for 802.11a) */ - AR5K_CAP_BSSIDMASK = 13, /* Supports bssid mask */ - AR5K_CAP_MCAST_KEYSRCH = 14, /* Supports multicast key search */ - AR5K_CAP_TSF_ADJUST = 15, /* Supports beacon tsf adjust */ - AR5K_CAP_XR = 16, /* Supports XR mode */ - AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */ - AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */ - AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */ - AR5K_CAP_RFSILENT = 20, /* Supports RFsilent */ -}; - - -/* XXX: we *may* move cap_range stuff to struct wiphy */ -struct ath5k_capabilities { - /* - * Supported PHY modes - * (ie. CHANNEL_A, CHANNEL_B, ...) - */ - DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX); - - /* - * Frequency range (without regulation restrictions) - */ - struct { - u16 range_2ghz_min; - u16 range_2ghz_max; - u16 range_5ghz_min; - u16 range_5ghz_max; - } cap_range; - - /* - * Values stored in the EEPROM (some of them...) - */ - struct ath5k_eeprom_info cap_eeprom; - - /* - * Queue information - */ - struct { - u8 q_tx_num; - } cap_queues; -}; - - -/***************************************\ - HARDWARE ABSTRACTION LAYER STRUCTURE -\***************************************/ - -/* - * Misc defines - */ - -#define AR5K_MAX_GPIO 10 -#define AR5K_MAX_RF_BANKS 8 - -struct ath5k_hw { - u32 ah_magic; - - struct ath5k_softc *ah_sc; - void __iomem *ah_iobase; - - enum ath5k_int ah_imr; - - enum ieee80211_if_types ah_op_mode; - enum ath5k_power_mode ah_power_mode; - struct ieee80211_channel ah_current_channel; - bool ah_turbo; - bool ah_calibration; - bool ah_running; - bool ah_single_chip; - enum ath5k_rfgain ah_rf_gain; - - u32 ah_mac_srev; - u16 ah_mac_version; - u16 ah_mac_revision; - u16 ah_phy_revision; - u16 ah_radio_5ghz_revision; - u16 ah_radio_2ghz_revision; - u32 ah_phy_spending; - - enum ath5k_version ah_version; - enum ath5k_radio ah_radio; - u32 ah_phy; - - bool ah_5ghz; - bool ah_2ghz; - -#define ah_regdomain ah_capabilities.cap_regdomain.reg_current -#define ah_regdomain_hw ah_capabilities.cap_regdomain.reg_hw -#define ah_modes ah_capabilities.cap_mode -#define ah_ee_version ah_capabilities.cap_eeprom.ee_version - - u32 ah_atim_window; - u32 ah_aifs; - u32 ah_cw_min; - u32 ah_cw_max; - bool ah_software_retry; - u32 ah_limit_tx_retries; - - u32 ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; - bool ah_ant_diversity; - - u8 ah_sta_id[ETH_ALEN]; - - /* Current BSSID we are trying to assoc to / creating. - * This is passed by mac80211 on config_interface() and cached here for - * use in resets */ - u8 ah_bssid[ETH_ALEN]; - - u32 ah_gpio[AR5K_MAX_GPIO]; - int ah_gpio_npins; - - struct ath5k_capabilities ah_capabilities; - - struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES]; - u32 ah_txq_status; - u32 ah_txq_imr_txok; - u32 ah_txq_imr_txerr; - u32 ah_txq_imr_txurn; - u32 ah_txq_imr_txdesc; - u32 ah_txq_imr_txeol; - u32 *ah_rf_banks; - size_t ah_rf_banks_size; - struct ath5k_gain ah_gain; - u32 ah_offset[AR5K_MAX_RF_BANKS]; - - struct { - u16 txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE]; - u16 txp_rates[AR5K_MAX_RATES]; - s16 txp_min; - s16 txp_max; - bool txp_tpc; - s16 txp_ofdm; - } ah_txpower; - - struct { - bool r_enabled; - int r_last_alert; - struct ieee80211_channel r_last_channel; - } ah_radar; - - /* noise floor from last periodic calibration */ - s32 ah_noise_floor; - - /* - * Function pointers - */ - int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, - unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, - unsigned int, unsigned int, unsigned int, unsigned int, - unsigned int, unsigned int, unsigned int); - int (*ah_setup_xtx_desc)(struct ath5k_hw *, struct ath5k_desc *, - unsigned int, unsigned int, unsigned int, unsigned int, - unsigned int, unsigned int); - int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_tx_status *); - int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_rx_status *); -}; - -/* - * Prototypes - */ - -/* General Functions */ -extern int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set); -/* Attach/Detach Functions */ -extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version); -extern const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, unsigned int mode); -extern void ath5k_hw_detach(struct ath5k_hw *ah); -/* Reset Functions */ -extern int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, struct ieee80211_channel *channel, bool change_channel); -/* Power management functions */ -extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration); -/* DMA Related Functions */ -extern void ath5k_hw_start_rx(struct ath5k_hw *ah); -extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah); -extern u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah); -extern void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr); -extern int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue); -extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue); -extern u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue); -extern int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr); -extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase); -/* Interrupt handling */ -extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); -extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); -extern enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask); -extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats); -/* EEPROM access functions */ -extern int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain); -/* Protocol Control Unit Functions */ -extern int ath5k_hw_set_opmode(struct ath5k_hw *ah); -/* BSSID Functions */ -extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac); -extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); -extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id); -extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); -/* Receive start/stop functions */ -extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); -extern void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah); -/* RX Filter functions */ -extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); -extern int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index); -extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index); -extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); -extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); -/* Beacon related functions */ -extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah); -extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); -extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah); -extern void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval); -#if 0 -extern int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, const struct ath5k_beacon_state *state); -extern void ath5k_hw_reset_beacon(struct ath5k_hw *ah); -extern int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr); -#endif -/* ACK bit rate */ -void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high); -/* ACK/CTS Timeouts */ -extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout); -extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah); -extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout); -extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah); -/* Key table (WEP) functions */ -extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry); -extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry); -extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac); -extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac); -/* Queue Control Unit, DFS Control Unit Functions */ -extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info); -extern int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *queue_info); -extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info); -extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); -extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); -extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); -extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); -extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah); -/* Hardware Descriptor Functions */ -extern int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, u32 size, unsigned int flags); -/* GPIO Functions */ -extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); -extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); -extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); -extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); -extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); -extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level); -/* Misc functions */ -extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result); - - -/* Initial register settings functions */ -extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); -/* Initialize RF */ -extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode); -extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq); -extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah); -extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah); - - -/* PHY/RF channel functions */ -extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags); -extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel); -/* PHY calibration */ -extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel); -extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); -/* Misc PHY functions */ -extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); -extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant); -extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah); -extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq); -/* TX power setup */ -extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower); -extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power); - - -static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) -{ - return ioread32(ah->ah_iobase + reg); -} - -static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) -{ - iowrite32(val, ah->ah_iobase + reg); -} - -#endif |