diff options
Diffstat (limited to 'drivers/net/wireless/ath/wil6210/main.c')
| -rw-r--r-- | drivers/net/wireless/ath/wil6210/main.c | 380 |
1 files changed, 282 insertions, 98 deletions
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index 95fcd361322..11e6d9d22ea 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -14,16 +14,16 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -#include <linux/kernel.h> -#include <linux/netdevice.h> -#include <linux/sched.h> -#include <linux/ieee80211.h> -#include <linux/wireless.h> -#include <linux/slab.h> #include <linux/moduleparam.h> #include <linux/if_arp.h> +#include <linux/etherdevice.h> #include "wil6210.h" +#include "txrx.h" + +static bool no_fw_recovery; +module_param(no_fw_recovery, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(no_fw_recovery, " disable FW error recovery"); /* * Due to a hardware issue, @@ -58,33 +58,74 @@ void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src, __raw_writel(*s++, d++); } -static void _wil6210_disconnect(struct wil6210_priv *wil, void *bssid) +static void wil_disconnect_cid(struct wil6210_priv *wil, int cid) { uint i; + struct wil_sta_info *sta = &wil->sta[cid]; + + sta->data_port_open = false; + if (sta->status != wil_sta_unused) { + wmi_disconnect_sta(wil, sta->addr, WLAN_REASON_DEAUTH_LEAVING); + sta->status = wil_sta_unused; + } + + for (i = 0; i < WIL_STA_TID_NUM; i++) { + struct wil_tid_ampdu_rx *r = sta->tid_rx[i]; + sta->tid_rx[i] = NULL; + wil_tid_ampdu_rx_free(wil, r); + } + for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) { + if (wil->vring2cid_tid[i][0] == cid) + wil_vring_fini_tx(wil, i); + } + memset(&sta->stats, 0, sizeof(sta->stats)); +} + +static void _wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid) +{ + int cid = -ENOENT; struct net_device *ndev = wil_to_ndev(wil); struct wireless_dev *wdev = wil->wdev; - wil_dbg(wil, "%s()\n", __func__); + might_sleep(); + if (bssid) { + cid = wil_find_cid(wil, bssid); + wil_dbg_misc(wil, "%s(%pM, CID %d)\n", __func__, bssid, cid); + } else { + wil_dbg_misc(wil, "%s(all)\n", __func__); + } - wil_link_off(wil); - clear_bit(wil_status_fwconnected, &wil->status); + if (cid >= 0) /* disconnect 1 peer */ + wil_disconnect_cid(wil, cid); + else /* disconnect all */ + for (cid = 0; cid < WIL6210_MAX_CID; cid++) + wil_disconnect_cid(wil, cid); - switch (wdev->sme_state) { - case CFG80211_SME_CONNECTED: - cfg80211_disconnected(ndev, WLAN_STATUS_UNSPECIFIED_FAILURE, - NULL, 0, GFP_KERNEL); - break; - case CFG80211_SME_CONNECTING: - cfg80211_connect_result(ndev, bssid, NULL, 0, NULL, 0, - WLAN_STATUS_UNSPECIFIED_FAILURE, - GFP_KERNEL); + /* link state */ + switch (wdev->iftype) { + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_P2P_CLIENT: + wil_link_off(wil); + if (test_bit(wil_status_fwconnected, &wil->status)) { + clear_bit(wil_status_fwconnected, &wil->status); + cfg80211_disconnected(ndev, + WLAN_STATUS_UNSPECIFIED_FAILURE, + NULL, 0, GFP_KERNEL); + } else if (test_bit(wil_status_fwconnecting, &wil->status)) { + cfg80211_connect_result(ndev, bssid, NULL, 0, NULL, 0, + WLAN_STATUS_UNSPECIFIED_FAILURE, + GFP_KERNEL); + } + clear_bit(wil_status_fwconnecting, &wil->status); break; default: - ; + /* AP-like interface and monitor: + * never scan, always connected + */ + if (bssid) + cfg80211_del_sta(ndev, bssid, GFP_KERNEL); + break; } - - for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) - wil_vring_fini_tx(wil, i); } static void wil_disconnect_worker(struct work_struct *work) @@ -92,14 +133,16 @@ static void wil_disconnect_worker(struct work_struct *work) struct wil6210_priv *wil = container_of(work, struct wil6210_priv, disconnect_worker); + mutex_lock(&wil->mutex); _wil6210_disconnect(wil, NULL); + mutex_unlock(&wil->mutex); } static void wil_connect_timer_fn(ulong x) { struct wil6210_priv *wil = (void *)x; - wil_dbg(wil, "Connect timeout\n"); + wil_dbg_misc(wil, "Connect timeout\n"); /* reschedule to thread context - disconnect won't * run from atomic context @@ -107,9 +150,105 @@ static void wil_connect_timer_fn(ulong x) schedule_work(&wil->disconnect_worker); } +static void wil_scan_timer_fn(ulong x) +{ + struct wil6210_priv *wil = (void *)x; + + clear_bit(wil_status_fwready, &wil->status); + wil_err(wil, "Scan timeout detected, start fw error recovery\n"); + schedule_work(&wil->fw_error_worker); +} + +static void wil_fw_error_worker(struct work_struct *work) +{ + struct wil6210_priv *wil = container_of(work, + struct wil6210_priv, fw_error_worker); + struct wireless_dev *wdev = wil->wdev; + + wil_dbg_misc(wil, "fw error worker\n"); + + if (no_fw_recovery) + return; + + /* increment @recovery_count if less then WIL6210_FW_RECOVERY_TO + * passed since last recovery attempt + */ + if (time_is_after_jiffies(wil->last_fw_recovery + + WIL6210_FW_RECOVERY_TO)) + wil->recovery_count++; + else + wil->recovery_count = 1; /* fw was alive for a long time */ + + if (wil->recovery_count > WIL6210_FW_RECOVERY_RETRIES) { + wil_err(wil, "too many recovery attempts (%d), giving up\n", + wil->recovery_count); + return; + } + + wil->last_fw_recovery = jiffies; + + mutex_lock(&wil->mutex); + switch (wdev->iftype) { + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_P2P_CLIENT: + case NL80211_IFTYPE_MONITOR: + wil_info(wil, "fw error recovery started (try %d)...\n", + wil->recovery_count); + wil_reset(wil); + + /* need to re-allocate Rx ring after reset */ + wil_rx_init(wil); + break; + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_P2P_GO: + /* recovery in these modes is done by upper layers */ + break; + default: + break; + } + mutex_unlock(&wil->mutex); +} + +static int wil_find_free_vring(struct wil6210_priv *wil) +{ + int i; + for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) { + if (!wil->vring_tx[i].va) + return i; + } + return -EINVAL; +} + +static void wil_connect_worker(struct work_struct *work) +{ + int rc; + struct wil6210_priv *wil = container_of(work, struct wil6210_priv, + connect_worker); + int cid = wil->pending_connect_cid; + int ringid = wil_find_free_vring(wil); + + if (cid < 0) { + wil_err(wil, "No connection pending\n"); + return; + } + + wil_dbg_wmi(wil, "Configure for connection CID %d\n", cid); + + rc = wil_vring_init_tx(wil, ringid, WIL6210_TX_RING_SIZE, cid, 0); + wil->pending_connect_cid = -1; + if (rc == 0) { + wil->sta[cid].status = wil_sta_connected; + wil_link_on(wil); + } else { + wil->sta[cid].status = wil_sta_unused; + } +} + int wil_priv_init(struct wil6210_priv *wil) { - wil_dbg(wil, "%s()\n", __func__); + wil_dbg_misc(wil, "%s()\n", __func__); + + memset(wil->sta, 0, sizeof(wil->sta)); mutex_init(&wil->mutex); mutex_init(&wil->wmi_mutex); @@ -118,10 +257,12 @@ int wil_priv_init(struct wil6210_priv *wil) wil->pending_connect_cid = -1; setup_timer(&wil->connect_timer, wil_connect_timer_fn, (ulong)wil); + setup_timer(&wil->scan_timer, wil_scan_timer_fn, (ulong)wil); - INIT_WORK(&wil->wmi_connect_worker, wmi_connect_worker); + INIT_WORK(&wil->connect_worker, wil_connect_worker); INIT_WORK(&wil->disconnect_worker, wil_disconnect_worker); INIT_WORK(&wil->wmi_event_worker, wmi_event_worker); + INIT_WORK(&wil->fw_error_worker, wil_fw_error_worker); INIT_LIST_HEAD(&wil->pending_wmi_ev); spin_lock_init(&wil->wmi_ev_lock); @@ -136,16 +277,12 @@ int wil_priv_init(struct wil6210_priv *wil) return -EAGAIN; } - /* make shadow copy of registers that should not change on run time */ - wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX, - sizeof(struct wil6210_mbox_ctl)); - wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx); - wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx); + wil->last_fw_recovery = jiffies; return 0; } -void wil6210_disconnect(struct wil6210_priv *wil, void *bssid) +void wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid) { del_timer_sync(&wil->connect_timer); _wil6210_disconnect(wil, bssid); @@ -153,8 +290,12 @@ void wil6210_disconnect(struct wil6210_priv *wil, void *bssid) void wil_priv_deinit(struct wil6210_priv *wil) { + del_timer_sync(&wil->scan_timer); cancel_work_sync(&wil->disconnect_worker); + cancel_work_sync(&wil->fw_error_worker); + mutex_lock(&wil->mutex); wil6210_disconnect(wil, NULL); + mutex_unlock(&wil->mutex); wmi_event_flush(wil); destroy_workqueue(wil->wmi_wq_conn); destroy_workqueue(wil->wmi_wq); @@ -162,50 +303,78 @@ void wil_priv_deinit(struct wil6210_priv *wil) static void wil_target_reset(struct wil6210_priv *wil) { - wil_dbg(wil, "Resetting...\n"); + int delay = 0; + u32 hw_state; + u32 rev_id; + wil_dbg_misc(wil, "Resetting...\n"); + + /* register read */ +#define R(a) ioread32(wil->csr + HOSTADDR(a)) /* register write */ #define W(a, v) iowrite32(v, wil->csr + HOSTADDR(a)) /* register set = read, OR, write */ -#define S(a, v) iowrite32(ioread32(wil->csr + HOSTADDR(a)) | v, \ - wil->csr + HOSTADDR(a)) +#define S(a, v) W(a, R(a) | v) + /* register clear = read, AND with inverted, write */ +#define C(a, v) W(a, R(a) & ~v) + wil->hw_version = R(RGF_USER_FW_REV_ID); + rev_id = wil->hw_version & 0xff; /* hpal_perst_from_pad_src_n_mask */ S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(6)); /* car_perst_rst_src_n_mask */ S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(7)); + wmb(); /* order is important here */ W(RGF_USER_MAC_CPU_0, BIT(1)); /* mac_cpu_man_rst */ W(RGF_USER_USER_CPU_0, BIT(1)); /* user_cpu_man_rst */ - - msleep(100); + wmb(); /* order is important here */ W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0xFE000000); W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003F); W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000170); W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xFFE7FC00); - - msleep(100); + wmb(); /* order is important here */ W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0); W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0); W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0); W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0); + wmb(); /* order is important here */ W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000001); - W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00000080); + if (rev_id == 1) { + W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00000080); + } else { + W(RGF_PCIE_LOS_COUNTER_CTL, BIT(6) | BIT(8)); + W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00008000); + } W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0); + wmb(); /* order is important here */ + + /* wait until device ready */ + do { + msleep(1); + hw_state = R(RGF_USER_HW_MACHINE_STATE); + if (delay++ > 100) { + wil_err(wil, "Reset not completed, hw_state 0x%08x\n", + hw_state); + return; + } + } while (hw_state != HW_MACHINE_BOOT_DONE); - msleep(2000); - - W(RGF_USER_USER_CPU_0, BIT(0)); /* user_cpu_man_de_rst */ + if (rev_id == 2) + W(RGF_PCIE_LOS_COUNTER_CTL, BIT(8)); - msleep(2000); + C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD); + wmb(); /* order is important here */ - wil_dbg(wil, "Reset completed\n"); + wil_dbg_misc(wil, "Reset completed in %d ms\n", delay); +#undef R #undef W #undef S +#undef C } void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r) @@ -225,8 +394,8 @@ static int wil_wait_for_fw_ready(struct wil6210_priv *wil) wil_err(wil, "Firmware not ready\n"); return -ETIME; } else { - wil_dbg(wil, "FW ready after %d ms\n", - jiffies_to_msecs(to-left)); + wil_info(wil, "FW ready after %d ms. HW version 0x%08x\n", + jiffies_to_msecs(to-left), wil->hw_version); } return 0; } @@ -240,29 +409,39 @@ int wil_reset(struct wil6210_priv *wil) { int rc; + WARN_ON(!mutex_is_locked(&wil->mutex)); + cancel_work_sync(&wil->disconnect_worker); wil6210_disconnect(wil, NULL); - wmi_event_flush(wil); + wil->status = 0; /* prevent NAPI from being scheduled */ + if (test_bit(wil_status_napi_en, &wil->status)) { + napi_synchronize(&wil->napi_rx); + } - flush_workqueue(wil->wmi_wq); - flush_workqueue(wil->wmi_wq_conn); + if (wil->scan_request) { + wil_dbg_misc(wil, "Abort scan_request 0x%p\n", + wil->scan_request); + del_timer_sync(&wil->scan_timer); + cfg80211_scan_done(wil->scan_request, true); + wil->scan_request = NULL; + } wil6210_disable_irq(wil); - wil->status = 0; + + wmi_event_flush(wil); + + flush_workqueue(wil->wmi_wq_conn); + flush_workqueue(wil->wmi_wq); /* TODO: put MAC in reset */ wil_target_reset(wil); + wil_rx_fini(wil); + /* init after reset */ wil->pending_connect_cid = -1; - INIT_COMPLETION(wil->wmi_ready); - - /* make shadow copy of registers that should not change on run time */ - wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX, - sizeof(struct wil6210_mbox_ctl)); - wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx); - wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx); + reinit_completion(&wil->wmi_ready); /* TODO: release MAC reset */ wil6210_enable_irq(wil); @@ -273,12 +452,17 @@ int wil_reset(struct wil6210_priv *wil) return rc; } +void wil_fw_error_recovery(struct wil6210_priv *wil) +{ + wil_dbg_misc(wil, "starting fw error recovery\n"); + schedule_work(&wil->fw_error_worker); +} void wil_link_on(struct wil6210_priv *wil) { struct net_device *ndev = wil_to_ndev(wil); - wil_dbg(wil, "%s()\n", __func__); + wil_dbg_misc(wil, "%s()\n", __func__); netif_carrier_on(ndev); netif_tx_wake_all_queues(ndev); @@ -288,7 +472,7 @@ void wil_link_off(struct wil6210_priv *wil) { struct net_device *ndev = wil_to_ndev(wil); - wil_dbg(wil, "%s()\n", __func__); + wil_dbg_misc(wil, "%s()\n", __func__); netif_tx_stop_all_queues(ndev); netif_carrier_off(ndev); @@ -298,41 +482,38 @@ static int __wil_up(struct wil6210_priv *wil) { struct net_device *ndev = wil_to_ndev(wil); struct wireless_dev *wdev = wil->wdev; - struct ieee80211_channel *channel = wdev->preset_chandef.chan; int rc; - int bi; - u16 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype); + + WARN_ON(!mutex_is_locked(&wil->mutex)); rc = wil_reset(wil); if (rc) return rc; - /* FIXME Firmware works now in PBSS mode(ToDS=0, FromDS=0) */ - wmi_nettype = wil_iftype_nl2wmi(NL80211_IFTYPE_ADHOC); + /* Rx VRING. After MAC and beacon */ + rc = wil_rx_init(wil); + if (rc) + return rc; + switch (wdev->iftype) { case NL80211_IFTYPE_STATION: - wil_dbg(wil, "type: STATION\n"); - bi = 0; + wil_dbg_misc(wil, "type: STATION\n"); ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_AP: - wil_dbg(wil, "type: AP\n"); - bi = 100; + wil_dbg_misc(wil, "type: AP\n"); ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_P2P_CLIENT: - wil_dbg(wil, "type: P2P_CLIENT\n"); - bi = 0; + wil_dbg_misc(wil, "type: P2P_CLIENT\n"); ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_P2P_GO: - wil_dbg(wil, "type: P2P_GO\n"); - bi = 100; + wil_dbg_misc(wil, "type: P2P_GO\n"); ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_MONITOR: - wil_dbg(wil, "type: Monitor\n"); - bi = 0; + wil_dbg_misc(wil, "type: Monitor\n"); ndev->type = ARPHRD_IEEE80211_RADIOTAP; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_RADIOTAP ? */ break; @@ -340,33 +521,13 @@ static int __wil_up(struct wil6210_priv *wil) return -EOPNOTSUPP; } - /* Apply profile in the following order: */ - /* SSID and channel for the AP */ - switch (wdev->iftype) { - case NL80211_IFTYPE_AP: - case NL80211_IFTYPE_P2P_GO: - if (wdev->ssid_len == 0) { - wil_err(wil, "SSID not set\n"); - return -EINVAL; - } - wmi_set_ssid(wil, wdev->ssid_len, wdev->ssid); - if (channel) - wmi_set_channel(wil, channel->hw_value); - break; - default: - ; - } - /* MAC address - pre-requisite for other commands */ wmi_set_mac_address(wil, ndev->dev_addr); - /* Set up beaconing if required. */ - rc = wmi_set_bcon(wil, bi, wmi_nettype); - if (rc) - return rc; - /* Rx VRING. After MAC and beacon */ - wil_rx_init(wil); + napi_enable(&wil->napi_rx); + napi_enable(&wil->napi_tx); + set_bit(wil_status_napi_en, &wil->status); return 0; } @@ -384,7 +545,14 @@ int wil_up(struct wil6210_priv *wil) static int __wil_down(struct wil6210_priv *wil) { + WARN_ON(!mutex_is_locked(&wil->mutex)); + + clear_bit(wil_status_napi_en, &wil->status); + napi_disable(&wil->napi_rx); + napi_disable(&wil->napi_tx); + if (wil->scan_request) { + del_timer_sync(&wil->scan_timer); cfg80211_scan_done(wil->scan_request, true); wil->scan_request = NULL; } @@ -405,3 +573,19 @@ int wil_down(struct wil6210_priv *wil) return rc; } + +int wil_find_cid(struct wil6210_priv *wil, const u8 *mac) +{ + int i; + int rc = -ENOENT; + + for (i = 0; i < ARRAY_SIZE(wil->sta); i++) { + if ((wil->sta[i].status != wil_sta_unused) && + ether_addr_equal(wil->sta[i].addr, mac)) { + rc = i; + break; + } + } + + return rc; +} |