diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/beacon.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/beacon.c | 256 |
1 files changed, 61 insertions, 195 deletions
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index b5c16b3a37b..e387f0b2954 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -80,7 +80,7 @@ static void ath9k_beacon_setup(struct ath_softc *sc, struct ieee80211_vif *vif, u8 chainmask = ah->txchainmask; u8 rate = 0; - sband = &sc->sbands[common->hw->conf.chandef.chan->band]; + sband = &common->sbands[common->hw->conf.chandef.chan->band]; rate = sband->bitrates[rateidx].hw_value; if (vif->bss_conf.use_short_preamble) rate |= sband->bitrates[rateidx].hw_value_short; @@ -274,28 +274,26 @@ static int ath9k_beacon_choose_slot(struct ath_softc *sc) return slot; } -void ath9k_set_tsfadjust(struct ath_softc *sc, struct ieee80211_vif *vif) +static void ath9k_set_tsfadjust(struct ath_softc *sc, struct ieee80211_vif *vif) { struct ath_common *common = ath9k_hw_common(sc->sc_ah); struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf; struct ath_vif *avp = (void *)vif->drv_priv; - u64 tsfadjust; + u32 tsfadjust; if (avp->av_bslot == 0) return; - tsfadjust = cur_conf->beacon_interval * avp->av_bslot / ATH_BCBUF; - avp->tsf_adjust = cpu_to_le64(TU_TO_USEC(tsfadjust)); + tsfadjust = cur_conf->beacon_interval * avp->av_bslot; + tsfadjust = TU_TO_USEC(tsfadjust) / ATH_BCBUF; + avp->tsf_adjust = cpu_to_le64(tsfadjust); ath_dbg(common, CONFIG, "tsfadjust is: %llu for bslot: %d\n", (unsigned long long)tsfadjust, avp->av_bslot); } -bool ath9k_csa_is_finished(struct ath_softc *sc) +bool ath9k_csa_is_finished(struct ath_softc *sc, struct ieee80211_vif *vif) { - struct ieee80211_vif *vif; - - vif = sc->csa_vif; if (!vif || !vif->csa_active) return false; @@ -303,11 +301,22 @@ bool ath9k_csa_is_finished(struct ath_softc *sc) return false; ieee80211_csa_finish(vif); - - sc->csa_vif = NULL; return true; } +static void ath9k_csa_update_vif(void *data, u8 *mac, struct ieee80211_vif *vif) +{ + struct ath_softc *sc = data; + ath9k_csa_is_finished(sc, vif); +} + +void ath9k_csa_update(struct ath_softc *sc) +{ + ieee80211_iterate_active_interfaces_atomic(sc->hw, + IEEE80211_IFACE_ITER_NORMAL, + ath9k_csa_update_vif, sc); +} + void ath9k_beacon_tasklet(unsigned long data) { struct ath_softc *sc = (struct ath_softc *)data; @@ -318,7 +327,7 @@ void ath9k_beacon_tasklet(unsigned long data) bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA); int slot; - if (test_bit(SC_OP_HW_RESET, &sc->sc_flags)) { + if (test_bit(ATH_OP_HW_RESET, &common->op_flags)) { ath_dbg(common, RESET, "reset work is pending, skip beaconing now\n"); return; @@ -334,8 +343,16 @@ void ath9k_beacon_tasklet(unsigned long data) if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) { sc->beacon.bmisscnt++; - if (!ath9k_hw_check_alive(ah)) - ieee80211_queue_work(sc->hw, &sc->hw_check_work); + ath9k_hw_check_nav(ah); + + /* + * If the previous beacon has not been transmitted + * and a MAC/BB hang has been identified, return + * here because a chip reset would have been + * initiated. + */ + if (!ath_hw_check(sc)) + return; if (sc->beacon.bmisscnt < BSTUCK_THRESH * sc->nbcnvifs) { ath_dbg(common, BSTUCK, @@ -353,13 +370,13 @@ void ath9k_beacon_tasklet(unsigned long data) return; } - /* EDMA devices check that in the tx completion function. */ - if (!edma && ath9k_csa_is_finished(sc)) - return; - slot = ath9k_beacon_choose_slot(sc); vif = sc->beacon.bslot[slot]; + /* EDMA devices check that in the tx completion function. */ + if (!edma && ath9k_csa_is_finished(sc, vif)) + return; + if (!vif || !vif->bss_conf.enable_beacon) return; @@ -438,146 +455,18 @@ static void ath9k_beacon_config_ap(struct ath_softc *sc, struct ath_beacon_config *conf) { struct ath_hw *ah = sc->sc_ah; - struct ath_common *common = ath9k_hw_common(ah); - u32 nexttbtt, intval; - - /* NB: the beacon interval is kept internally in TU's */ - intval = TU_TO_USEC(conf->beacon_interval); - intval /= ATH_BCBUF; - nexttbtt = intval; - - if (conf->enable_beacon) - ah->imask |= ATH9K_INT_SWBA; - else - ah->imask &= ~ATH9K_INT_SWBA; - - ath_dbg(common, BEACON, - "AP (%s) nexttbtt: %u intval: %u conf_intval: %u\n", - (conf->enable_beacon) ? "Enable" : "Disable", - nexttbtt, intval, conf->beacon_interval); - ath9k_beacon_init(sc, nexttbtt, intval, true); + ath9k_cmn_beacon_config_ap(ah, conf, ATH_BCBUF); + ath9k_beacon_init(sc, conf->nexttbtt, conf->intval, false); } -/* - * This sets up the beacon timers according to the timestamp of the last - * received beacon and the current TSF, configures PCF and DTIM - * handling, programs the sleep registers so the hardware will wakeup in - * time to receive beacons, and configures the beacon miss handling so - * we'll receive a BMISS interrupt when we stop seeing beacons from the AP - * we've associated with. - */ -static void ath9k_beacon_config_sta(struct ath_softc *sc, +static void ath9k_beacon_config_sta(struct ath_hw *ah, struct ath_beacon_config *conf) { - struct ath_hw *ah = sc->sc_ah; - struct ath_common *common = ath9k_hw_common(ah); struct ath9k_beacon_state bs; - int dtimperiod, dtimcount, sleepduration; - int cfpperiod, cfpcount; - u32 nexttbtt = 0, intval, tsftu; - u64 tsf; - int num_beacons, offset, dtim_dec_count, cfp_dec_count; - /* No need to configure beacon if we are not associated */ - if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) { - ath_dbg(common, BEACON, - "STA is not yet associated..skipping beacon config\n"); + if (ath9k_cmn_beacon_config_sta(ah, conf, &bs) == -EPERM) return; - } - - memset(&bs, 0, sizeof(bs)); - intval = conf->beacon_interval; - - /* - * Setup dtim and cfp parameters according to - * last beacon we received (which may be none). - */ - dtimperiod = conf->dtim_period; - dtimcount = conf->dtim_count; - if (dtimcount >= dtimperiod) /* NB: sanity check */ - dtimcount = 0; - cfpperiod = 1; /* NB: no PCF support yet */ - cfpcount = 0; - - sleepduration = conf->listen_interval * intval; - - /* - * Pull nexttbtt forward to reflect the current - * TSF and calculate dtim+cfp state for the result. - */ - tsf = ath9k_hw_gettsf64(ah); - tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE; - - num_beacons = tsftu / intval + 1; - offset = tsftu % intval; - nexttbtt = tsftu - offset; - if (offset) - nexttbtt += intval; - - /* DTIM Beacon every dtimperiod Beacon */ - dtim_dec_count = num_beacons % dtimperiod; - /* CFP every cfpperiod DTIM Beacon */ - cfp_dec_count = (num_beacons / dtimperiod) % cfpperiod; - if (dtim_dec_count) - cfp_dec_count++; - - dtimcount -= dtim_dec_count; - if (dtimcount < 0) - dtimcount += dtimperiod; - - cfpcount -= cfp_dec_count; - if (cfpcount < 0) - cfpcount += cfpperiod; - - bs.bs_intval = intval; - bs.bs_nexttbtt = nexttbtt; - bs.bs_dtimperiod = dtimperiod*intval; - bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval; - bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod; - bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod; - bs.bs_cfpmaxduration = 0; - - /* - * Calculate the number of consecutive beacons to miss* before taking - * a BMISS interrupt. The configuration is specified in TU so we only - * need calculate based on the beacon interval. Note that we clamp the - * result to at most 15 beacons. - */ - if (sleepduration > intval) { - bs.bs_bmissthreshold = conf->listen_interval * - ATH_DEFAULT_BMISS_LIMIT / 2; - } else { - bs.bs_bmissthreshold = DIV_ROUND_UP(conf->bmiss_timeout, intval); - if (bs.bs_bmissthreshold > 15) - bs.bs_bmissthreshold = 15; - else if (bs.bs_bmissthreshold <= 0) - bs.bs_bmissthreshold = 1; - } - - /* - * Calculate sleep duration. The configuration is given in ms. - * We ensure a multiple of the beacon period is used. Also, if the sleep - * duration is greater than the DTIM period then it makes senses - * to make it a multiple of that. - * - * XXX fixed at 100ms - */ - - bs.bs_sleepduration = roundup(IEEE80211_MS_TO_TU(100), sleepduration); - if (bs.bs_sleepduration > bs.bs_dtimperiod) - bs.bs_sleepduration = bs.bs_dtimperiod; - - /* TSF out of range threshold fixed at 1 second */ - bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD; - - ath_dbg(common, BEACON, "tsf: %llu tsftu: %u\n", tsf, tsftu); - ath_dbg(common, BEACON, - "bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n", - bs.bs_bmissthreshold, bs.bs_sleepduration, - bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext); - - /* Set the computed STA beacon timers */ ath9k_hw_disable_interrupts(ah); ath9k_hw_set_sta_beacon_timers(ah, &bs); @@ -592,53 +481,23 @@ static void ath9k_beacon_config_adhoc(struct ath_softc *sc, { struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); - u32 intval, nexttbtt; ath9k_reset_beacon_status(sc); - intval = TU_TO_USEC(conf->beacon_interval); + ath9k_cmn_beacon_config_adhoc(ah, conf); - if (conf->ibss_creator) { - nexttbtt = intval; - } else { - u32 tbtt, offset, tsftu; - u64 tsf; - - /* - * Pull nexttbtt forward to reflect the current - * sync'd TSF. - */ - tsf = ath9k_hw_gettsf64(ah); - tsftu = TSF_TO_TU(tsf >> 32, tsf) + FUDGE; - offset = tsftu % conf->beacon_interval; - tbtt = tsftu - offset; - if (offset) - tbtt += conf->beacon_interval; - - nexttbtt = TU_TO_USEC(tbtt); - } - - if (conf->enable_beacon) - ah->imask |= ATH9K_INT_SWBA; - else - ah->imask &= ~ATH9K_INT_SWBA; - - ath_dbg(common, BEACON, - "IBSS (%s) nexttbtt: %u intval: %u conf_intval: %u\n", - (conf->enable_beacon) ? "Enable" : "Disable", - nexttbtt, intval, conf->beacon_interval); - - ath9k_beacon_init(sc, nexttbtt, intval, conf->ibss_creator); + ath9k_beacon_init(sc, conf->nexttbtt, conf->intval, conf->ibss_creator); /* * Set the global 'beacon has been configured' flag for the * joiner case in IBSS mode. */ if (!conf->ibss_creator && conf->enable_beacon) - set_bit(SC_OP_BEACONS, &sc->sc_flags); + set_bit(ATH_OP_BEACONS, &common->op_flags); } -bool ath9k_allow_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif) +static bool ath9k_allow_beacon_config(struct ath_softc *sc, + struct ieee80211_vif *vif) { struct ath_common *common = ath9k_hw_common(sc->sc_ah); struct ath_vif *avp = (void *)vif->drv_priv; @@ -654,7 +513,7 @@ bool ath9k_allow_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif) if (sc->sc_ah->opmode == NL80211_IFTYPE_STATION) { if ((vif->type == NL80211_IFTYPE_STATION) && - test_bit(SC_OP_BEACONS, &sc->sc_flags) && + test_bit(ATH_OP_BEACONS, &common->op_flags) && !avp->primary_sta_vif) { ath_dbg(common, CONFIG, "Beacon already configured for a station interface\n"); @@ -676,11 +535,8 @@ static void ath9k_cache_beacon_config(struct ath_softc *sc, cur_conf->beacon_interval = bss_conf->beacon_int; cur_conf->dtim_period = bss_conf->dtim_period; - cur_conf->listen_interval = 1; cur_conf->dtim_count = 1; cur_conf->ibss_creator = bss_conf->ibss_creator; - cur_conf->bmiss_timeout = - ATH_DEFAULT_BMISS_LIMIT * cur_conf->beacon_interval; /* * It looks like mac80211 may end up using beacon interval of zero in @@ -691,6 +547,9 @@ static void ath9k_cache_beacon_config(struct ath_softc *sc, if (cur_conf->beacon_interval == 0) cur_conf->beacon_interval = 100; + cur_conf->bmiss_timeout = + ATH_DEFAULT_BMISS_LIMIT * cur_conf->beacon_interval; + /* * We don't parse dtim period from mac80211 during the driver * initialization as it breaks association with hidden-ssid @@ -706,15 +565,22 @@ void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif, { struct ieee80211_bss_conf *bss_conf = &vif->bss_conf; struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf; + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); unsigned long flags; bool skip_beacon = false; + if (vif->type == NL80211_IFTYPE_AP) + ath9k_set_tsfadjust(sc, vif); + + if (!ath9k_allow_beacon_config(sc, vif)) + return; + if (sc->sc_ah->opmode == NL80211_IFTYPE_STATION) { ath9k_cache_beacon_config(sc, bss_conf); ath9k_set_beacon(sc); - set_bit(SC_OP_BEACONS, &sc->sc_flags); + set_bit(ATH_OP_BEACONS, &common->op_flags); return; - } /* @@ -752,13 +618,13 @@ void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif, } /* - * Do not set the SC_OP_BEACONS flag for IBSS joiner mode + * Do not set the ATH_OP_BEACONS flag for IBSS joiner mode * here, it is done in ath9k_beacon_config_adhoc(). */ if (cur_conf->enable_beacon && !skip_beacon) - set_bit(SC_OP_BEACONS, &sc->sc_flags); + set_bit(ATH_OP_BEACONS, &common->op_flags); else - clear_bit(SC_OP_BEACONS, &sc->sc_flags); + clear_bit(ATH_OP_BEACONS, &common->op_flags); } } @@ -776,7 +642,7 @@ void ath9k_set_beacon(struct ath_softc *sc) ath9k_beacon_config_adhoc(sc, cur_conf); break; case NL80211_IFTYPE_STATION: - ath9k_beacon_config_sta(sc, cur_conf); + ath9k_beacon_config_sta(sc->sc_ah, cur_conf); break; default: ath_dbg(common, CONFIG, "Unsupported beaconing mode\n"); |
