diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/ar9003_eeprom.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 42 |
1 files changed, 32 insertions, 10 deletions
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h index ab21a491598..694ca2e680e 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h @@ -42,7 +42,6 @@ #define AR9300_EEPMISC_WOW 0x02 #define AR9300_CUSTOMER_DATA_SIZE 20 -#define FBIN2FREQ(x, y) ((y) ? (2300 + x) : (4800 + 5 * x)) #define AR9300_MAX_CHAINS 3 #define AR9300_ANT_16S 25 #define AR9300_FUTURE_MODAL_SZ 6 @@ -53,6 +52,8 @@ #define AR9300_PAPRD_SCALE_2 0x70000000 #define AR9300_PAPRD_SCALE_2_S 28 +#define AR9300_EEP_ANTDIV_CONTROL_DEFAULT_VALUE 0xc9 + /* Delta from which to start power to pdadc table */ /* This offset is used in both open loop and closed loop power control * schemes. In open loop power control, it is not really needed, but for @@ -69,13 +70,16 @@ #define AR9300_BASE_ADDR 0x3ff #define AR9300_BASE_ADDR_512 0x1ff -#define AR9300_OTP_BASE 0x14000 -#define AR9300_OTP_STATUS 0x15f18 +#define AR9300_OTP_BASE \ + ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30000 : 0x14000) +#define AR9300_OTP_STATUS \ + ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30018 : 0x15f18) #define AR9300_OTP_STATUS_TYPE 0x7 #define AR9300_OTP_STATUS_VALID 0x4 #define AR9300_OTP_STATUS_ACCESS_BUSY 0x2 #define AR9300_OTP_STATUS_SM_BUSY 0x1 -#define AR9300_OTP_READ_DATA 0x15f1c +#define AR9300_OTP_READ_DATA \ + ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x3001c : 0x15f1c) enum targetPowerHTRates { HT_TARGET_RATE_0_8_16, @@ -216,10 +220,8 @@ struct ar9300_modal_eep_header { u8 spurChans[AR_EEPROM_MODAL_SPURS]; /* 3 Check if the register is per chain */ int8_t noiseFloorThreshCh[AR9300_MAX_CHAINS]; - u8 ob[AR9300_MAX_CHAINS]; - u8 db_stage2[AR9300_MAX_CHAINS]; - u8 db_stage3[AR9300_MAX_CHAINS]; - u8 db_stage4[AR9300_MAX_CHAINS]; + u8 reserved[11]; + int8_t quick_drop; u8 xpaBiasLvl; u8 txFrameToDataStart; u8 txFrameToPaOn; @@ -233,7 +235,9 @@ struct ar9300_modal_eep_header { u8 thresh62; __le32 papdRateMaskHt20; __le32 papdRateMaskHt40; - u8 futureModal[10]; + __le16 switchcomspdt; + u8 xlna_bias_strength; + u8 futureModal[7]; } __packed; struct ar9300_cal_data_per_freq_op_loop { @@ -266,9 +270,22 @@ struct cal_ctl_data_5g { u8 ctlEdges[AR9300_NUM_BAND_EDGES_5G]; } __packed; +#define MAX_BASE_EXTENSION_FUTURE 2 + struct ar9300_BaseExtension_1 { u8 ant_div_control; - u8 future[13]; + u8 future[MAX_BASE_EXTENSION_FUTURE]; + /* + * misc_enable: + * + * BIT 0 - TX Gain Cap enable. + * BIT 1 - Uncompressed Checksum enable. + * BIT 2/3 - MinCCApwr enable 2g/5g. + */ + u8 misc_enable; + int8_t tempslopextension[8]; + int8_t quick_drop_low; + int8_t quick_drop_high; } __packed; struct ar9300_BaseExtension_2 { @@ -329,9 +346,14 @@ struct ar9300_eeprom { s32 ar9003_hw_get_tx_gain_idx(struct ath_hw *ah); s32 ar9003_hw_get_rx_gain_idx(struct ath_hw *ah); +u32 ar9003_hw_ant_ctrl_common_get(struct ath_hw *ah, bool is2ghz); +u32 ar9003_hw_ant_ctrl_common_2_get(struct ath_hw *ah, bool is2ghz); u8 *ar9003_get_spur_chan_ptr(struct ath_hw *ah, bool is_2ghz); unsigned int ar9003_get_paprd_scale_factor(struct ath_hw *ah, struct ath9k_channel *chan); + +void ar9003_hw_internal_regulator_apply(struct ath_hw *ah); + #endif |