diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/core.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/core.c | 1098 |
1 files changed, 1098 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c new file mode 100644 index 00000000000..e6c56c5bb0f --- /dev/null +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -0,0 +1,1098 @@ +/* + * Copyright (c) 2005-2011 Atheros Communications Inc. + * Copyright (c) 2011-2013 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/module.h> +#include <linux/firmware.h> + +#include "core.h" +#include "mac.h" +#include "htc.h" +#include "hif.h" +#include "wmi.h" +#include "bmi.h" +#include "debug.h" +#include "htt.h" + +unsigned int ath10k_debug_mask; +static bool uart_print; +static unsigned int ath10k_p2p; +module_param_named(debug_mask, ath10k_debug_mask, uint, 0644); +module_param(uart_print, bool, 0644); +module_param_named(p2p, ath10k_p2p, uint, 0644); +MODULE_PARM_DESC(debug_mask, "Debugging mask"); +MODULE_PARM_DESC(uart_print, "Uart target debugging"); +MODULE_PARM_DESC(p2p, "Enable ath10k P2P support"); + +static const struct ath10k_hw_params ath10k_hw_params_list[] = { + { + .id = QCA988X_HW_2_0_VERSION, + .name = "qca988x hw2.0", + .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR, + .fw = { + .dir = QCA988X_HW_2_0_FW_DIR, + .fw = QCA988X_HW_2_0_FW_FILE, + .otp = QCA988X_HW_2_0_OTP_FILE, + .board = QCA988X_HW_2_0_BOARD_DATA_FILE, + }, + }, +}; + +static void ath10k_send_suspend_complete(struct ath10k *ar) +{ + ath10k_dbg(ATH10K_DBG_BOOT, "boot suspend complete\n"); + + complete(&ar->target_suspend); +} + +static int ath10k_init_configure_target(struct ath10k *ar) +{ + u32 param_host; + int ret; + + /* tell target which HTC version it is used*/ + ret = ath10k_bmi_write32(ar, hi_app_host_interest, + HTC_PROTOCOL_VERSION); + if (ret) { + ath10k_err("settings HTC version failed\n"); + return ret; + } + + /* set the firmware mode to STA/IBSS/AP */ + ret = ath10k_bmi_read32(ar, hi_option_flag, ¶m_host); + if (ret) { + ath10k_err("setting firmware mode (1/2) failed\n"); + return ret; + } + + /* TODO following parameters need to be re-visited. */ + /* num_device */ + param_host |= (1 << HI_OPTION_NUM_DEV_SHIFT); + /* Firmware mode */ + /* FIXME: Why FW_MODE_AP ??.*/ + param_host |= (HI_OPTION_FW_MODE_AP << HI_OPTION_FW_MODE_SHIFT); + /* mac_addr_method */ + param_host |= (1 << HI_OPTION_MAC_ADDR_METHOD_SHIFT); + /* firmware_bridge */ + param_host |= (0 << HI_OPTION_FW_BRIDGE_SHIFT); + /* fwsubmode */ + param_host |= (0 << HI_OPTION_FW_SUBMODE_SHIFT); + + ret = ath10k_bmi_write32(ar, hi_option_flag, param_host); + if (ret) { + ath10k_err("setting firmware mode (2/2) failed\n"); + return ret; + } + + /* We do all byte-swapping on the host */ + ret = ath10k_bmi_write32(ar, hi_be, 0); + if (ret) { + ath10k_err("setting host CPU BE mode failed\n"); + return ret; + } + + /* FW descriptor/Data swap flags */ + ret = ath10k_bmi_write32(ar, hi_fw_swap, 0); + + if (ret) { + ath10k_err("setting FW data/desc swap flags failed\n"); + return ret; + } + + return 0; +} + +static const struct firmware *ath10k_fetch_fw_file(struct ath10k *ar, + const char *dir, + const char *file) +{ + char filename[100]; + const struct firmware *fw; + int ret; + + if (file == NULL) + return ERR_PTR(-ENOENT); + + if (dir == NULL) + dir = "."; + + snprintf(filename, sizeof(filename), "%s/%s", dir, file); + ret = request_firmware(&fw, filename, ar->dev); + if (ret) + return ERR_PTR(ret); + + return fw; +} + +static int ath10k_push_board_ext_data(struct ath10k *ar) +{ + u32 board_data_size = QCA988X_BOARD_DATA_SZ; + u32 board_ext_data_size = QCA988X_BOARD_EXT_DATA_SZ; + u32 board_ext_data_addr; + int ret; + + ret = ath10k_bmi_read32(ar, hi_board_ext_data, &board_ext_data_addr); + if (ret) { + ath10k_err("could not read board ext data addr (%d)\n", ret); + return ret; + } + + ath10k_dbg(ATH10K_DBG_BOOT, + "boot push board extended data addr 0x%x\n", + board_ext_data_addr); + + if (board_ext_data_addr == 0) + return 0; + + if (ar->board_len != (board_data_size + board_ext_data_size)) { + ath10k_err("invalid board (ext) data sizes %zu != %d+%d\n", + ar->board_len, board_data_size, board_ext_data_size); + return -EINVAL; + } + + ret = ath10k_bmi_write_memory(ar, board_ext_data_addr, + ar->board_data + board_data_size, + board_ext_data_size); + if (ret) { + ath10k_err("could not write board ext data (%d)\n", ret); + return ret; + } + + ret = ath10k_bmi_write32(ar, hi_board_ext_data_config, + (board_ext_data_size << 16) | 1); + if (ret) { + ath10k_err("could not write board ext data bit (%d)\n", ret); + return ret; + } + + return 0; +} + +static int ath10k_download_board_data(struct ath10k *ar) +{ + u32 board_data_size = QCA988X_BOARD_DATA_SZ; + u32 address; + int ret; + + ret = ath10k_push_board_ext_data(ar); + if (ret) { + ath10k_err("could not push board ext data (%d)\n", ret); + goto exit; + } + + ret = ath10k_bmi_read32(ar, hi_board_data, &address); + if (ret) { + ath10k_err("could not read board data addr (%d)\n", ret); + goto exit; + } + + ret = ath10k_bmi_write_memory(ar, address, ar->board_data, + min_t(u32, board_data_size, + ar->board_len)); + if (ret) { + ath10k_err("could not write board data (%d)\n", ret); + goto exit; + } + + ret = ath10k_bmi_write32(ar, hi_board_data_initialized, 1); + if (ret) { + ath10k_err("could not write board data bit (%d)\n", ret); + goto exit; + } + +exit: + return ret; +} + +static int ath10k_download_and_run_otp(struct ath10k *ar) +{ + u32 result, address = ar->hw_params.patch_load_addr; + int ret; + + /* OTP is optional */ + + if (!ar->otp_data || !ar->otp_len) { + ath10k_warn("Not running otp, calibration will be incorrect (otp-data %p otp_len %zd)!\n", + ar->otp_data, ar->otp_len); + return 0; + } + + ath10k_dbg(ATH10K_DBG_BOOT, "boot upload otp to 0x%x len %zd\n", + address, ar->otp_len); + + ret = ath10k_bmi_fast_download(ar, address, ar->otp_data, ar->otp_len); + if (ret) { + ath10k_err("could not write otp (%d)\n", ret); + return ret; + } + + ret = ath10k_bmi_execute(ar, address, 0, &result); + if (ret) { + ath10k_err("could not execute otp (%d)\n", ret); + return ret; + } + + ath10k_dbg(ATH10K_DBG_BOOT, "boot otp execute result %d\n", result); + + if (result != 0) { + ath10k_err("otp calibration failed: %d", result); + return -EINVAL; + } + + return 0; +} + +static int ath10k_download_fw(struct ath10k *ar) +{ + u32 address; + int ret; + + address = ar->hw_params.patch_load_addr; + + ret = ath10k_bmi_fast_download(ar, address, ar->firmware_data, + ar->firmware_len); + if (ret) { + ath10k_err("could not write fw (%d)\n", ret); + goto exit; + } + +exit: + return ret; +} + +static void ath10k_core_free_firmware_files(struct ath10k *ar) +{ + if (ar->board && !IS_ERR(ar->board)) + release_firmware(ar->board); + + if (ar->otp && !IS_ERR(ar->otp)) + release_firmware(ar->otp); + + if (ar->firmware && !IS_ERR(ar->firmware)) + release_firmware(ar->firmware); + + ar->board = NULL; + ar->board_data = NULL; + ar->board_len = 0; + + ar->otp = NULL; + ar->otp_data = NULL; + ar->otp_len = 0; + + ar->firmware = NULL; + ar->firmware_data = NULL; + ar->firmware_len = 0; +} + +static int ath10k_core_fetch_firmware_api_1(struct ath10k *ar) +{ + int ret = 0; + + if (ar->hw_params.fw.fw == NULL) { + ath10k_err("firmware file not defined\n"); + return -EINVAL; + } + + if (ar->hw_params.fw.board == NULL) { + ath10k_err("board data file not defined"); + return -EINVAL; + } + + ar->board = ath10k_fetch_fw_file(ar, + ar->hw_params.fw.dir, + ar->hw_params.fw.board); + if (IS_ERR(ar->board)) { + ret = PTR_ERR(ar->board); + ath10k_err("could not fetch board data (%d)\n", ret); + goto err; + } + + ar->board_data = ar->board->data; + ar->board_len = ar->board->size; + + ar->firmware = ath10k_fetch_fw_file(ar, + ar->hw_params.fw.dir, + ar->hw_params.fw.fw); + if (IS_ERR(ar->firmware)) { + ret = PTR_ERR(ar->firmware); + ath10k_err("could not fetch firmware (%d)\n", ret); + goto err; + } + + ar->firmware_data = ar->firmware->data; + ar->firmware_len = ar->firmware->size; + + /* OTP may be undefined. If so, don't fetch it at all */ + if (ar->hw_params.fw.otp == NULL) + return 0; + + ar->otp = ath10k_fetch_fw_file(ar, + ar->hw_params.fw.dir, + ar->hw_params.fw.otp); + if (IS_ERR(ar->otp)) { + ret = PTR_ERR(ar->otp); + ath10k_err("could not fetch otp (%d)\n", ret); + goto err; + } + + ar->otp_data = ar->otp->data; + ar->otp_len = ar->otp->size; + + return 0; + +err: + ath10k_core_free_firmware_files(ar); + return ret; +} + +static int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name) +{ + size_t magic_len, len, ie_len; + int ie_id, i, index, bit, ret; + struct ath10k_fw_ie *hdr; + const u8 *data; + __le32 *timestamp; + + /* first fetch the firmware file (firmware-*.bin) */ + ar->firmware = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir, name); + if (IS_ERR(ar->firmware)) { + ath10k_err("could not fetch firmware file '%s/%s': %ld\n", + ar->hw_params.fw.dir, name, PTR_ERR(ar->firmware)); + return PTR_ERR(ar->firmware); + } + + data = ar->firmware->data; + len = ar->firmware->size; + + /* magic also includes the null byte, check that as well */ + magic_len = strlen(ATH10K_FIRMWARE_MAGIC) + 1; + + if (len < magic_len) { + ath10k_err("firmware file '%s/%s' too small to contain magic: %zu\n", + ar->hw_params.fw.dir, name, len); + ret = -EINVAL; + goto err; + } + + if (memcmp(data, ATH10K_FIRMWARE_MAGIC, magic_len) != 0) { + ath10k_err("invalid firmware magic\n"); + ret = -EINVAL; + goto err; + } + + /* jump over the padding */ + magic_len = ALIGN(magic_len, 4); + + len -= magic_len; + data += magic_len; + + /* loop elements */ + while (len > sizeof(struct ath10k_fw_ie)) { + hdr = (struct ath10k_fw_ie *)data; + + ie_id = le32_to_cpu(hdr->id); + ie_len = le32_to_cpu(hdr->len); + + len -= sizeof(*hdr); + data += sizeof(*hdr); + + if (len < ie_len) { + ath10k_err("invalid length for FW IE %d (%zu < %zu)\n", + ie_id, len, ie_len); + ret = -EINVAL; + goto err; + } + + switch (ie_id) { + case ATH10K_FW_IE_FW_VERSION: + if (ie_len > sizeof(ar->hw->wiphy->fw_version) - 1) + break; + + memcpy(ar->hw->wiphy->fw_version, data, ie_len); + ar->hw->wiphy->fw_version[ie_len] = '\0'; + + ath10k_dbg(ATH10K_DBG_BOOT, + "found fw version %s\n", + ar->hw->wiphy->fw_version); + break; + case ATH10K_FW_IE_TIMESTAMP: + if (ie_len != sizeof(u32)) + break; + + timestamp = (__le32 *)data; + + ath10k_dbg(ATH10K_DBG_BOOT, "found fw timestamp %d\n", + le32_to_cpup(timestamp)); + break; + case ATH10K_FW_IE_FEATURES: + ath10k_dbg(ATH10K_DBG_BOOT, + "found firmware features ie (%zd B)\n", + ie_len); + + for (i = 0; i < ATH10K_FW_FEATURE_COUNT; i++) { + index = i / 8; + bit = i % 8; + + if (index == ie_len) + break; + + if (data[index] & (1 << bit)) { + ath10k_dbg(ATH10K_DBG_BOOT, + "Enabling feature bit: %i\n", + i); + __set_bit(i, ar->fw_features); + } + } + + ath10k_dbg_dump(ATH10K_DBG_BOOT, "features", "", + ar->fw_features, + sizeof(ar->fw_features)); + break; + case ATH10K_FW_IE_FW_IMAGE: + ath10k_dbg(ATH10K_DBG_BOOT, + "found fw image ie (%zd B)\n", + ie_len); + + ar->firmware_data = data; + ar->firmware_len = ie_len; + + break; + case ATH10K_FW_IE_OTP_IMAGE: + ath10k_dbg(ATH10K_DBG_BOOT, + "found otp image ie (%zd B)\n", + ie_len); + + ar->otp_data = data; + ar->otp_len = ie_len; + + break; + default: + ath10k_warn("Unknown FW IE: %u\n", + le32_to_cpu(hdr->id)); + break; + } + + /* jump over the padding */ + ie_len = ALIGN(ie_len, 4); + + len -= ie_len; + data += ie_len; + } + + if (!ar->firmware_data || !ar->firmware_len) { + ath10k_warn("No ATH10K_FW_IE_FW_IMAGE found from '%s/%s', skipping\n", + ar->hw_params.fw.dir, name); + ret = -ENOMEDIUM; + goto err; + } + + /* now fetch the board file */ + if (ar->hw_params.fw.board == NULL) { + ath10k_err("board data file not defined"); + ret = -EINVAL; + goto err; + } + + ar->board = ath10k_fetch_fw_file(ar, + ar->hw_params.fw.dir, + ar->hw_params.fw.board); + if (IS_ERR(ar->board)) { + ret = PTR_ERR(ar->board); + ath10k_err("could not fetch board data '%s/%s' (%d)\n", + ar->hw_params.fw.dir, ar->hw_params.fw.board, + ret); + goto err; + } + + ar->board_data = ar->board->data; + ar->board_len = ar->board->size; + + return 0; + +err: + ath10k_core_free_firmware_files(ar); + return ret; +} + +static int ath10k_core_fetch_firmware_files(struct ath10k *ar) +{ + int ret; + + ar->fw_api = 2; + ath10k_dbg(ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api); + + ret = ath10k_core_fetch_firmware_api_n(ar, ATH10K_FW_API2_FILE); + if (ret == 0) + goto success; + + ar->fw_api = 1; + ath10k_dbg(ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api); + + ret = ath10k_core_fetch_firmware_api_1(ar); + if (ret) + return ret; + +success: + ath10k_dbg(ATH10K_DBG_BOOT, "using fw api %d\n", ar->fw_api); + + return 0; +} + +static int ath10k_init_download_firmware(struct ath10k *ar) +{ + int ret; + + ret = ath10k_download_board_data(ar); + if (ret) { + ath10k_err("failed to download board data: %d\n", ret); + return ret; + } + + ret = ath10k_download_and_run_otp(ar); + if (ret) { + ath10k_err("failed to run otp: %d\n", ret); + return ret; + } + + ret = ath10k_download_fw(ar); + if (ret) { + ath10k_err("failed to download firmware: %d\n", ret); + return ret; + } + + return ret; +} + +static int ath10k_init_uart(struct ath10k *ar) +{ + int ret; + + /* + * Explicitly setting UART prints to zero as target turns it on + * based on scratch registers. + */ + ret = ath10k_bmi_write32(ar, hi_serial_enable, 0); + if (ret) { + ath10k_warn("could not disable UART prints (%d)\n", ret); + return ret; + } + + if (!uart_print) + return 0; + + ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, 7); + if (ret) { + ath10k_warn("could not enable UART prints (%d)\n", ret); + return ret; + } + + ret = ath10k_bmi_write32(ar, hi_serial_enable, 1); + if (ret) { + ath10k_warn("could not enable UART prints (%d)\n", ret); + return ret; + } + + /* Set the UART baud rate to 19200. */ + ret = ath10k_bmi_write32(ar, hi_desired_baud_rate, 19200); + if (ret) { + ath10k_warn("could not set the baud rate (%d)\n", ret); + return ret; + } + + ath10k_info("UART prints enabled\n"); + return 0; +} + +static int ath10k_init_hw_params(struct ath10k *ar) +{ + const struct ath10k_hw_params *uninitialized_var(hw_params); + int i; + + for (i = 0; i < ARRAY_SIZE(ath10k_hw_params_list); i++) { + hw_params = &ath10k_hw_params_list[i]; + + if (hw_params->id == ar->target_version) + break; + } + + if (i == ARRAY_SIZE(ath10k_hw_params_list)) { + ath10k_err("Unsupported hardware version: 0x%x\n", + ar->target_version); + return -EINVAL; + } + + ar->hw_params = *hw_params; + + ath10k_dbg(ATH10K_DBG_BOOT, "Hardware name %s version 0x%x\n", + ar->hw_params.name, ar->target_version); + + return 0; +} + +static void ath10k_core_restart(struct work_struct *work) +{ + struct ath10k *ar = container_of(work, struct ath10k, restart_work); + + mutex_lock(&ar->conf_mutex); + + switch (ar->state) { + case ATH10K_STATE_ON: + ar->state = ATH10K_STATE_RESTARTING; + del_timer_sync(&ar->scan.timeout); + ath10k_reset_scan((unsigned long)ar); + ieee80211_restart_hw(ar->hw); + break; + case ATH10K_STATE_OFF: + /* this can happen if driver is being unloaded + * or if the crash happens during FW probing */ + ath10k_warn("cannot restart a device that hasn't been started\n"); + break; + case ATH10K_STATE_RESTARTING: + /* hw restart might be requested from multiple places */ + break; + case ATH10K_STATE_RESTARTED: + ar->state = ATH10K_STATE_WEDGED; + /* fall through */ + case ATH10K_STATE_WEDGED: + ath10k_warn("device is wedged, will not restart\n"); + break; + } + + mutex_unlock(&ar->conf_mutex); +} + +int ath10k_core_start(struct ath10k *ar) +{ + int status; + + lockdep_assert_held(&ar->conf_mutex); + + ath10k_bmi_start(ar); + + if (ath10k_init_configure_target(ar)) { + status = -EINVAL; + goto err; + } + + status = ath10k_init_download_firmware(ar); + if (status) + goto err; + + status = ath10k_init_uart(ar); + if (status) + goto err; + + ar->htc.htc_ops.target_send_suspend_complete = + ath10k_send_suspend_complete; + + status = ath10k_htc_init(ar); + if (status) { + ath10k_err("could not init HTC (%d)\n", status); + goto err; + } + + status = ath10k_bmi_done(ar); + if (status) + goto err; + + status = ath10k_wmi_attach(ar); + if (status) { + ath10k_err("WMI attach failed: %d\n", status); + goto err; + } + + status = ath10k_htt_init(ar); + if (status) { + ath10k_err("failed to init htt: %d\n", status); + goto err_wmi_detach; + } + + status = ath10k_htt_tx_alloc(&ar->htt); + if (status) { + ath10k_err("failed to alloc htt tx: %d\n", status); + goto err_wmi_detach; + } + + status = ath10k_htt_rx_alloc(&ar->htt); + if (status) { + ath10k_err("failed to alloc htt rx: %d\n", status); + goto err_htt_tx_detach; + } + + status = ath10k_hif_start(ar); + if (status) { + ath10k_err("could not start HIF: %d\n", status); + goto err_htt_rx_detach; + } + + status = ath10k_htc_wait_target(&ar->htc); + if (status) { + ath10k_err("failed to connect to HTC: %d\n", status); + goto err_hif_stop; + } + + status = ath10k_htt_connect(&ar->htt); + if (status) { + ath10k_err("failed to connect htt (%d)\n", status); + goto err_hif_stop; + } + + status = ath10k_wmi_connect(ar); + if (status) { + ath10k_err("could not connect wmi: %d\n", status); + goto err_hif_stop; + } + + status = ath10k_htc_start(&ar->htc); + if (status) { + ath10k_err("failed to start htc: %d\n", status); + goto err_hif_stop; + } + + status = ath10k_wmi_wait_for_service_ready(ar); + if (status <= 0) { + ath10k_warn("wmi service ready event not received"); + status = -ETIMEDOUT; + goto err_htc_stop; + } + + ath10k_dbg(ATH10K_DBG_BOOT, "firmware %s booted\n", + ar->hw->wiphy->fw_version); + + status = ath10k_wmi_cmd_init(ar); + if (status) { + ath10k_err("could not send WMI init command (%d)\n", status); + goto err_htc_stop; + } + + status = ath10k_wmi_wait_for_unified_ready(ar); + if (status <= 0) { + ath10k_err("wmi unified ready event not received\n"); + status = -ETIMEDOUT; + goto err_htc_stop; + } + + status = ath10k_htt_setup(&ar->htt); + if (status) { + ath10k_err("failed to setup htt: %d\n", status); + goto err_htc_stop; + } + + status = ath10k_debug_start(ar); + if (status) + goto err_htc_stop; + + if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) + ar->free_vdev_map = (1 << TARGET_10X_NUM_VDEVS) - 1; + else + ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1; + + INIT_LIST_HEAD(&ar->arvifs); + + if (!test_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags)) + ath10k_info("%s (0x%08x, 0x%08x) fw %s api %d htt %d.%d\n", + ar->hw_params.name, + ar->target_version, + ar->chip_id, + ar->hw->wiphy->fw_version, + ar->fw_api, + ar->htt.target_version_major, + ar->htt.target_version_minor); + + __set_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags); + + return 0; + +err_htc_stop: + ath10k_htc_stop(&ar->htc); +err_hif_stop: + ath10k_hif_stop(ar); +err_htt_rx_detach: + ath10k_htt_rx_free(&ar->htt); +err_htt_tx_detach: + ath10k_htt_tx_free(&ar->htt); +err_wmi_detach: + ath10k_wmi_detach(ar); +err: + return status; +} +EXPORT_SYMBOL(ath10k_core_start); + +int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt) +{ + int ret; + + reinit_completion(&ar->target_suspend); + + ret = ath10k_wmi_pdev_suspend_target(ar, suspend_opt); + if (ret) { + ath10k_warn("could not suspend target (%d)\n", ret); + return ret; + } + + ret = wait_for_completion_timeout(&ar->target_suspend, 1 * HZ); + + if (ret == 0) { + ath10k_warn("suspend timed out - target pause event never came\n"); + return -ETIMEDOUT; + } + + return 0; +} + +void ath10k_core_stop(struct ath10k *ar) +{ + lockdep_assert_held(&ar->conf_mutex); + + /* try to suspend target */ + if (ar->state != ATH10K_STATE_RESTARTING) + ath10k_wait_for_suspend(ar, WMI_PDEV_SUSPEND_AND_DISABLE_INTR); + + ath10k_debug_stop(ar); + ath10k_htc_stop(&ar->htc); + ath10k_hif_stop(ar); + ath10k_htt_tx_free(&ar->htt); + ath10k_htt_rx_free(&ar->htt); + ath10k_wmi_detach(ar); +} +EXPORT_SYMBOL(ath10k_core_stop); + +/* mac80211 manages fw/hw initialization through start/stop hooks. However in + * order to know what hw capabilities should be advertised to mac80211 it is + * necessary to load the firmware (and tear it down immediately since start + * hook will try to init it again) before registering */ +static int ath10k_core_probe_fw(struct ath10k *ar) +{ + struct bmi_target_info target_info; + int ret = 0; + + ret = ath10k_hif_power_up(ar); + if (ret) { + ath10k_err("could not start pci hif (%d)\n", ret); + return ret; + } + + memset(&target_info, 0, sizeof(target_info)); + ret = ath10k_bmi_get_target_info(ar, &target_info); + if (ret) { + ath10k_err("could not get target info (%d)\n", ret); + ath10k_hif_power_down(ar); + return ret; + } + + ar->target_version = target_info.version; + ar->hw->wiphy->hw_version = target_info.version; + + ret = ath10k_init_hw_params(ar); + if (ret) { + ath10k_err("could not get hw params (%d)\n", ret); + ath10k_hif_power_down(ar); + return ret; + } + + ret = ath10k_core_fetch_firmware_files(ar); + if (ret) { + ath10k_err("could not fetch firmware files (%d)\n", ret); + ath10k_hif_power_down(ar); + return ret; + } + + mutex_lock(&ar->conf_mutex); + + ret = ath10k_core_start(ar); + if (ret) { + ath10k_err("could not init core (%d)\n", ret); + ath10k_core_free_firmware_files(ar); + ath10k_hif_power_down(ar); + mutex_unlock(&ar->conf_mutex); + return ret; + } + + ath10k_core_stop(ar); + + mutex_unlock(&ar->conf_mutex); + + ath10k_hif_power_down(ar); + return 0; +} + +static int ath10k_core_check_chip_id(struct ath10k *ar) +{ + u32 hw_revision = MS(ar->chip_id, SOC_CHIP_ID_REV); + + ath10k_dbg(ATH10K_DBG_BOOT, "boot chip_id 0x%08x hw_revision 0x%x\n", + ar->chip_id, hw_revision); + + /* Check that we are not using hw1.0 (some of them have same pci id + * as hw2.0) before doing anything else as ath10k crashes horribly + * due to missing hw1.0 workarounds. */ + switch (hw_revision) { + case QCA988X_HW_1_0_CHIP_ID_REV: + ath10k_err("ERROR: qca988x hw1.0 is not supported\n"); + return -EOPNOTSUPP; + + case QCA988X_HW_2_0_CHIP_ID_REV: + /* known hardware revision, continue normally */ + return 0; + + default: + ath10k_warn("Warning: hardware revision unknown (0x%x), expect problems\n", + ar->chip_id); + return 0; + } + + return 0; +} + +static void ath10k_core_register_work(struct work_struct *work) +{ + struct ath10k *ar = container_of(work, struct ath10k, register_work); + int status; + + status = ath10k_core_probe_fw(ar); + if (status) { + ath10k_err("could not probe fw (%d)\n", status); + goto err; + } + + status = ath10k_mac_register(ar); + if (status) { + ath10k_err("could not register to mac80211 (%d)\n", status); + goto err_release_fw; + } + + status = ath10k_debug_create(ar); + if (status) { + ath10k_err("unable to initialize debugfs\n"); + goto err_unregister_mac; + } + + set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags); + return; + +err_unregister_mac: + ath10k_mac_unregister(ar); +err_release_fw: + ath10k_core_free_firmware_files(ar); +err: + device_release_driver(ar->dev); + return; +} + +int ath10k_core_register(struct ath10k *ar, u32 chip_id) +{ + int status; + + ar->chip_id = chip_id; + + status = ath10k_core_check_chip_id(ar); + if (status) { + ath10k_err("Unsupported chip id 0x%08x\n", ar->chip_id); + return status; + } + + queue_work(ar->workqueue, &ar->register_work); + + return 0; +} +EXPORT_SYMBOL(ath10k_core_register); + +void ath10k_core_unregister(struct ath10k *ar) +{ + cancel_work_sync(&ar->register_work); + + if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags)) + return; + + /* We must unregister from mac80211 before we stop HTC and HIF. + * Otherwise we will fail to submit commands to FW and mac80211 will be + * unhappy about callback failures. */ + ath10k_mac_unregister(ar); + + ath10k_core_free_firmware_files(ar); + + ath10k_debug_destroy(ar); +} +EXPORT_SYMBOL(ath10k_core_unregister); + +struct ath10k *ath10k_core_create(void *hif_priv, struct device *dev, + const struct ath10k_hif_ops *hif_ops) +{ + struct ath10k *ar; + + ar = ath10k_mac_create(); + if (!ar) + return NULL; + + ar->ath_common.priv = ar; + ar->ath_common.hw = ar->hw; + + ar->p2p = !!ath10k_p2p; + ar->dev = dev; + + ar->hif.priv = hif_priv; + ar->hif.ops = hif_ops; + + init_completion(&ar->scan.started); + init_completion(&ar->scan.completed); + init_completion(&ar->scan.on_channel); + init_completion(&ar->target_suspend); + + init_completion(&ar->install_key_done); + init_completion(&ar->vdev_setup_done); + + setup_timer(&ar->scan.timeout, ath10k_reset_scan, (unsigned long)ar); + + ar->workqueue = create_singlethread_workqueue("ath10k_wq"); + if (!ar->workqueue) + goto err_wq; + + mutex_init(&ar->conf_mutex); + spin_lock_init(&ar->data_lock); + + INIT_LIST_HEAD(&ar->peers); + init_waitqueue_head(&ar->peer_mapping_wq); + + init_completion(&ar->offchan_tx_completed); + INIT_WORK(&ar->offchan_tx_work, ath10k_offchan_tx_work); + skb_queue_head_init(&ar->offchan_tx_queue); + + INIT_WORK(&ar->wmi_mgmt_tx_work, ath10k_mgmt_over_wmi_tx_work); + skb_queue_head_init(&ar->wmi_mgmt_tx_queue); + + INIT_WORK(&ar->register_work, ath10k_core_register_work); + INIT_WORK(&ar->restart_work, ath10k_core_restart); + + return ar; + +err_wq: + ath10k_mac_destroy(ar); + return NULL; +} +EXPORT_SYMBOL(ath10k_core_create); + +void ath10k_core_destroy(struct ath10k *ar) +{ + flush_workqueue(ar->workqueue); + destroy_workqueue(ar->workqueue); + + ath10k_mac_destroy(ar); +} +EXPORT_SYMBOL(ath10k_core_destroy); + +MODULE_AUTHOR("Qualcomm Atheros"); +MODULE_DESCRIPTION("Core module for QCA988X PCIe devices."); +MODULE_LICENSE("Dual BSD/GPL"); |