diff options
Diffstat (limited to 'drivers/net/wd.c')
| -rw-r--r-- | drivers/net/wd.c | 567 |
1 files changed, 0 insertions, 567 deletions
diff --git a/drivers/net/wd.c b/drivers/net/wd.c deleted file mode 100644 index f1549fff0ed..00000000000 --- a/drivers/net/wd.c +++ /dev/null @@ -1,567 +0,0 @@ -/* wd.c: A WD80x3 ethernet driver for linux. */ -/* - Written 1993-94 by Donald Becker. - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - This is a driver for WD8003 and WD8013 "compatible" ethercards. - - Thanks to Russ Nelson (nelson@crnwyr.com) for loaning me a WD8013. - - Changelog: - - Paul Gortmaker : multiple card support for module users, support - for non-standard memory sizes. - - -*/ - -static const char version[] = - "wd.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> - -#include <asm/io.h> -#include <asm/system.h> - -#include "8390.h" - -#define DRV_NAME "wd" - -/* A zero-terminated list of I/O addresses to be probed. */ -static unsigned int wd_portlist[] __initdata = -{0x300, 0x280, 0x380, 0x240, 0}; - -static int wd_probe1(struct net_device *dev, int ioaddr); - -static int wd_open(struct net_device *dev); -static void wd_reset_8390(struct net_device *dev); -static void wd_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); -static void wd_block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset); -static void wd_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page); -static int wd_close(struct net_device *dev); - - -#define WD_START_PG 0x00 /* First page of TX buffer */ -#define WD03_STOP_PG 0x20 /* Last page +1 of RX ring */ -#define WD13_STOP_PG 0x40 /* Last page +1 of RX ring */ - -#define WD_CMDREG 0 /* Offset to ASIC command register. */ -#define WD_RESET 0x80 /* Board reset, in WD_CMDREG. */ -#define WD_MEMENB 0x40 /* Enable the shared memory. */ -#define WD_CMDREG5 5 /* Offset to 16-bit-only ASIC register 5. */ -#define ISA16 0x80 /* Enable 16 bit access from the ISA bus. */ -#define NIC16 0x40 /* Enable 16 bit access from the 8390. */ -#define WD_NIC_OFFSET 16 /* Offset to the 8390 from the base_addr. */ -#define WD_IO_EXTENT 32 - - -/* Probe for the WD8003 and WD8013. These cards have the station - address PROM at I/O ports <base>+8 to <base>+13, with a checksum - following. A Soundblaster can have the same checksum as an WDethercard, - so we have an extra exclusionary check for it. - - The wd_probe1() routine initializes the card and fills the - station address field. */ - -static int __init do_wd_probe(struct net_device *dev) -{ - int i; - struct resource *r; - int base_addr = dev->base_addr; - int irq = dev->irq; - int mem_start = dev->mem_start; - int mem_end = dev->mem_end; - - if (base_addr > 0x1ff) { /* Check a user specified location. */ - r = request_region(base_addr, WD_IO_EXTENT, "wd-probe"); - if ( r == NULL) - return -EBUSY; - i = wd_probe1(dev, base_addr); - if (i != 0) - release_region(base_addr, WD_IO_EXTENT); - else - r->name = dev->name; - return i; - } - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - - for (i = 0; wd_portlist[i]; i++) { - int ioaddr = wd_portlist[i]; - r = request_region(ioaddr, WD_IO_EXTENT, "wd-probe"); - if (r == NULL) - continue; - if (wd_probe1(dev, ioaddr) == 0) { - r->name = dev->name; - return 0; - } - release_region(ioaddr, WD_IO_EXTENT); - dev->irq = irq; - dev->mem_start = mem_start; - dev->mem_end = mem_end; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init wd_probe(int unit) -{ - struct net_device *dev = alloc_ei_netdev(); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_wd_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static const struct net_device_ops wd_netdev_ops = { - .ndo_open = wd_open, - .ndo_stop = wd_close, - .ndo_start_xmit = ei_start_xmit, - .ndo_tx_timeout = ei_tx_timeout, - .ndo_get_stats = ei_get_stats, - .ndo_set_multicast_list = ei_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ei_poll, -#endif -}; - -static int __init wd_probe1(struct net_device *dev, int ioaddr) -{ - int i; - int err; - int checksum = 0; - int ancient = 0; /* An old card without config registers. */ - int word16 = 0; /* 0 = 8 bit, 1 = 16 bit */ - const char *model_name; - static unsigned version_printed; - - for (i = 0; i < 8; i++) - checksum += inb(ioaddr + 8 + i); - if (inb(ioaddr + 8) == 0xff /* Extra check to avoid soundcard. */ - || inb(ioaddr + 9) == 0xff - || (checksum & 0xff) != 0xFF) - return -ENODEV; - - /* Check for semi-valid mem_start/end values if supplied. */ - if ((dev->mem_start % 0x2000) || (dev->mem_end % 0x2000)) { - printk(KERN_WARNING "wd.c: user supplied mem_start or mem_end not on 8kB boundary - ignored.\n"); - dev->mem_start = 0; - dev->mem_end = 0; - } - - if (ei_debug && version_printed++ == 0) - printk(version); - - for (i = 0; i < 6; i++) - dev->dev_addr[i] = inb(ioaddr + 8 + i); - - printk("%s: WD80x3 at %#3x, %pM", - dev->name, ioaddr, dev->dev_addr); - - /* The following PureData probe code was contributed by - Mike Jagdis <jaggy@purplet.demon.co.uk>. Puredata does software - configuration differently from others so we have to check for them. - This detects an 8 bit, 16 bit or dumb (Toshiba, jumpered) card. - */ - if (inb(ioaddr+0) == 'P' && inb(ioaddr+1) == 'D') { - unsigned char reg5 = inb(ioaddr+5); - - switch (inb(ioaddr+2)) { - case 0x03: word16 = 0; model_name = "PDI8023-8"; break; - case 0x05: word16 = 0; model_name = "PDUC8023"; break; - case 0x0a: word16 = 1; model_name = "PDI8023-16"; break; - /* Either 0x01 (dumb) or they've released a new version. */ - default: word16 = 0; model_name = "PDI8023"; break; - } - dev->mem_start = ((reg5 & 0x1c) + 0xc0) << 12; - dev->irq = (reg5 & 0xe0) == 0xe0 ? 10 : (reg5 >> 5) + 1; - } else { /* End of PureData probe */ - /* This method of checking for a 16-bit board is borrowed from the - we.c driver. A simpler method is just to look in ASIC reg. 0x03. - I'm comparing the two method in alpha test to make certain they - return the same result. */ - /* Check for the old 8 bit board - it has register 0/8 aliasing. - Do NOT check i>=6 here -- it hangs the old 8003 boards! */ - for (i = 0; i < 6; i++) - if (inb(ioaddr+i) != inb(ioaddr+8+i)) - break; - if (i >= 6) { - ancient = 1; - model_name = "WD8003-old"; - word16 = 0; - } else { - int tmp = inb(ioaddr+1); /* fiddle with 16bit bit */ - outb( tmp ^ 0x01, ioaddr+1 ); /* attempt to clear 16bit bit */ - if (((inb( ioaddr+1) & 0x01) == 0x01) /* A 16 bit card */ - && (tmp & 0x01) == 0x01 ) { /* In a 16 slot. */ - int asic_reg5 = inb(ioaddr+WD_CMDREG5); - /* Magic to set ASIC to word-wide mode. */ - outb( NIC16 | (asic_reg5&0x1f), ioaddr+WD_CMDREG5); - outb(tmp, ioaddr+1); - model_name = "WD8013"; - word16 = 1; /* We have a 16bit board here! */ - } else { - model_name = "WD8003"; - word16 = 0; - } - outb(tmp, ioaddr+1); /* Restore original reg1 value. */ - } -#ifndef final_version - if ( !ancient && (inb(ioaddr+1) & 0x01) != (word16 & 0x01)) - printk("\nWD80?3: Bus width conflict, %d (probe) != %d (reg report).", - word16 ? 16 : 8, (inb(ioaddr+1) & 0x01) ? 16 : 8); -#endif - } - -#if defined(WD_SHMEM) && WD_SHMEM > 0x80000 - /* Allow a compile-time override. */ - dev->mem_start = WD_SHMEM; -#else - if (dev->mem_start == 0) { - /* Sanity and old 8003 check */ - int reg0 = inb(ioaddr); - if (reg0 == 0xff || reg0 == 0) { - /* Future plan: this could check a few likely locations first. */ - dev->mem_start = 0xd0000; - printk(" assigning address %#lx", dev->mem_start); - } else { - int high_addr_bits = inb(ioaddr+WD_CMDREG5) & 0x1f; - /* Some boards don't have the register 5 -- it returns 0xff. */ - if (high_addr_bits == 0x1f || word16 == 0) - high_addr_bits = 0x01; - dev->mem_start = ((reg0&0x3f) << 13) + (high_addr_bits << 19); - } - } -#endif - - /* The 8390 isn't at the base address -- the ASIC regs are there! */ - dev->base_addr = ioaddr+WD_NIC_OFFSET; - - if (dev->irq < 2) { - int irqmap[] = {9,3,5,7,10,11,15,4}; - int reg1 = inb(ioaddr+1); - int reg4 = inb(ioaddr+4); - if (ancient || reg1 == 0xff) { /* Ack!! No way to read the IRQ! */ - short nic_addr = ioaddr+WD_NIC_OFFSET; - unsigned long irq_mask; - - /* We have an old-style ethercard that doesn't report its IRQ - line. Do autoirq to find the IRQ line. Note that this IS NOT - a reliable way to trigger an interrupt. */ - outb_p(E8390_NODMA + E8390_STOP, nic_addr); - outb(0x00, nic_addr+EN0_IMR); /* Disable all intrs. */ - - irq_mask = probe_irq_on(); - outb_p(0xff, nic_addr + EN0_IMR); /* Enable all interrupts. */ - outb_p(0x00, nic_addr + EN0_RCNTLO); - outb_p(0x00, nic_addr + EN0_RCNTHI); - outb(E8390_RREAD+E8390_START, nic_addr); /* Trigger it... */ - mdelay(20); - dev->irq = probe_irq_off(irq_mask); - - outb_p(0x00, nic_addr+EN0_IMR); /* Mask all intrs. again. */ - - if (ei_debug > 2) - printk(" autoirq is %d", dev->irq); - if (dev->irq < 2) - dev->irq = word16 ? 10 : 5; - } else - dev->irq = irqmap[((reg4 >> 5) & 0x03) + (reg1 & 0x04)]; - } else if (dev->irq == 2) /* Fixup bogosity: IRQ2 is really IRQ9 */ - dev->irq = 9; - - /* Snarf the interrupt now. There's no point in waiting since we cannot - share and the board will usually be enabled. */ - i = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev); - if (i) { - printk (" unable to get IRQ %d.\n", dev->irq); - return i; - } - - /* OK, were are certain this is going to work. Setup the device. */ - ei_status.name = model_name; - ei_status.word16 = word16; - ei_status.tx_start_page = WD_START_PG; - ei_status.rx_start_page = WD_START_PG + TX_PAGES; - - /* Don't map in the shared memory until the board is actually opened. */ - - /* Some cards (eg WD8003EBT) can be jumpered for more (32k!) memory. */ - if (dev->mem_end != 0) { - ei_status.stop_page = (dev->mem_end - dev->mem_start)/256; - ei_status.priv = dev->mem_end - dev->mem_start; - } else { - ei_status.stop_page = word16 ? WD13_STOP_PG : WD03_STOP_PG; - dev->mem_end = dev->mem_start + (ei_status.stop_page - WD_START_PG)*256; - ei_status.priv = (ei_status.stop_page - WD_START_PG)*256; - } - - ei_status.mem = ioremap(dev->mem_start, ei_status.priv); - if (!ei_status.mem) { - free_irq(dev->irq, dev); - return -ENOMEM; - } - - printk(" %s, IRQ %d, shared memory at %#lx-%#lx.\n", - model_name, dev->irq, dev->mem_start, dev->mem_end-1); - - ei_status.reset_8390 = wd_reset_8390; - ei_status.block_input = wd_block_input; - ei_status.block_output = wd_block_output; - ei_status.get_8390_hdr = wd_get_8390_hdr; - - dev->netdev_ops = &wd_netdev_ops; - NS8390_init(dev, 0); - -#if 1 - /* Enable interrupt generation on softconfig cards -- M.U */ - /* .. but possibly potentially unsafe - Donald */ - if (inb(ioaddr+14) & 0x20) - outb(inb(ioaddr+4)|0x80, ioaddr+4); -#endif - - err = register_netdev(dev); - if (err) { - free_irq(dev->irq, dev); - iounmap(ei_status.mem); - } - return err; -} - -static int -wd_open(struct net_device *dev) -{ - int ioaddr = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */ - - /* Map in the shared memory. Always set register 0 last to remain - compatible with very old boards. */ - ei_status.reg0 = ((dev->mem_start>>13) & 0x3f) | WD_MEMENB; - ei_status.reg5 = ((dev->mem_start>>19) & 0x1f) | NIC16; - - if (ei_status.word16) - outb(ei_status.reg5, ioaddr+WD_CMDREG5); - outb(ei_status.reg0, ioaddr); /* WD_CMDREG */ - - return ei_open(dev); -} - -static void -wd_reset_8390(struct net_device *dev) -{ - int wd_cmd_port = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */ - - outb(WD_RESET, wd_cmd_port); - if (ei_debug > 1) printk("resetting the WD80x3 t=%lu...", jiffies); - ei_status.txing = 0; - - /* Set up the ASIC registers, just in case something changed them. */ - outb((((dev->mem_start>>13) & 0x3f)|WD_MEMENB), wd_cmd_port); - if (ei_status.word16) - outb(NIC16 | ((dev->mem_start>>19) & 0x1f), wd_cmd_port+WD_CMDREG5); - - if (ei_debug > 1) printk("reset done\n"); -} - -/* Grab the 8390 specific header. Similar to the block_input routine, but - we don't need to be concerned with ring wrap as the header will be at - the start of a page, so we optimize accordingly. */ - -static void -wd_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - - int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */ - void __iomem *hdr_start = ei_status.mem + ((ring_page - WD_START_PG)<<8); - - /* We'll always get a 4 byte header read followed by a packet read, so - we enable 16 bit mode before the header, and disable after the body. */ - if (ei_status.word16) - outb(ISA16 | ei_status.reg5, wd_cmdreg+WD_CMDREG5); - -#ifdef __BIG_ENDIAN - /* Officially this is what we are doing, but the readl() is faster */ - /* unfortunately it isn't endian aware of the struct */ - memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr)); - hdr->count = le16_to_cpu(hdr->count); -#else - ((unsigned int*)hdr)[0] = readl(hdr_start); -#endif -} - -/* Block input and output are easy on shared memory ethercards, and trivial - on the Western digital card where there is no choice of how to do it. - The only complications are that the ring buffer wraps, and need to map - switch between 8- and 16-bit modes. */ - -static void -wd_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) -{ - int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */ - unsigned long offset = ring_offset - (WD_START_PG<<8); - void __iomem *xfer_start = ei_status.mem + offset; - - if (offset + count > ei_status.priv) { - /* We must wrap the input move. */ - int semi_count = ei_status.priv - offset; - memcpy_fromio(skb->data, xfer_start, semi_count); - count -= semi_count; - memcpy_fromio(skb->data + semi_count, ei_status.mem + TX_PAGES * 256, count); - } else { - /* Packet is in one chunk -- we can copy + cksum. */ - memcpy_fromio(skb->data, xfer_start, count); - } - - /* Turn off 16 bit access so that reboot works. ISA brain-damage */ - if (ei_status.word16) - outb(ei_status.reg5, wd_cmdreg+WD_CMDREG5); -} - -static void -wd_block_output(struct net_device *dev, int count, const unsigned char *buf, - int start_page) -{ - int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */ - void __iomem *shmem = ei_status.mem + ((start_page - WD_START_PG)<<8); - - - if (ei_status.word16) { - /* Turn on and off 16 bit access so that reboot works. */ - outb(ISA16 | ei_status.reg5, wd_cmdreg+WD_CMDREG5); - memcpy_toio(shmem, buf, count); - outb(ei_status.reg5, wd_cmdreg+WD_CMDREG5); - } else - memcpy_toio(shmem, buf, count); -} - - -static int -wd_close(struct net_device *dev) -{ - int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */ - - if (ei_debug > 1) - printk("%s: Shutting down ethercard.\n", dev->name); - ei_close(dev); - - /* Change from 16-bit to 8-bit shared memory so reboot works. */ - if (ei_status.word16) - outb(ei_status.reg5, wd_cmdreg + WD_CMDREG5 ); - - /* And disable the shared memory. */ - outb(ei_status.reg0 & ~WD_MEMENB, wd_cmdreg); - - return 0; -} - - -#ifdef MODULE -#define MAX_WD_CARDS 4 /* Max number of wd cards per module */ -static struct net_device *dev_wd[MAX_WD_CARDS]; -static int io[MAX_WD_CARDS]; -static int irq[MAX_WD_CARDS]; -static int mem[MAX_WD_CARDS]; -static int mem_end[MAX_WD_CARDS]; /* for non std. mem size */ - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(mem, int, NULL, 0); -module_param_array(mem_end, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O base address(es)"); -MODULE_PARM_DESC(irq, "IRQ number(s) (ignored for PureData boards)"); -MODULE_PARM_DESC(mem, "memory base address(es)(ignored for PureData boards)"); -MODULE_PARM_DESC(mem_end, "memory end address(es)"); -MODULE_DESCRIPTION("ISA Western Digital wd8003/wd8013 ; SMC Elite, Elite16 ethernet driver"); -MODULE_LICENSE("GPL"); - -/* This is set up so that only a single autoprobe takes place per call. -ISA device autoprobes on a running machine are not recommended. */ - -int __init init_module(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_WD_CARDS; this_dev++) { - if (io[this_dev] == 0) { - if (this_dev != 0) break; /* only autoprobe 1st one */ - printk(KERN_NOTICE "wd.c: Presently autoprobing (not recommended) for a single card.\n"); - } - dev = alloc_ei_netdev(); - if (!dev) - break; - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - dev->mem_start = mem[this_dev]; - dev->mem_end = mem_end[this_dev]; - if (do_wd_probe(dev) == 0) { - dev_wd[found++] = dev; - continue; - } - free_netdev(dev); - printk(KERN_WARNING "wd.c: No wd80x3 card found (i/o = 0x%x).\n", io[this_dev]); - break; - } - if (found) - return 0; - return -ENXIO; -} - -static void cleanup_card(struct net_device *dev) -{ - free_irq(dev->irq, dev); - release_region(dev->base_addr - WD_NIC_OFFSET, WD_IO_EXTENT); - iounmap(ei_status.mem); -} - -void __exit -cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_WD_CARDS; this_dev++) { - struct net_device *dev = dev_wd[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ |