diff options
Diffstat (limited to 'drivers/net/wan/pc300.h')
| -rw-r--r-- | drivers/net/wan/pc300.h | 482 |
1 files changed, 0 insertions, 482 deletions
diff --git a/drivers/net/wan/pc300.h b/drivers/net/wan/pc300.h deleted file mode 100644 index 63e9fcf31fb..00000000000 --- a/drivers/net/wan/pc300.h +++ /dev/null @@ -1,482 +0,0 @@ -/* - * pc300.h Cyclades-PC300(tm) Kernel API Definitions. - * - * Author: Ivan Passos <ivan@cyclades.com> - * - * Copyright: (c) 1999-2002 Cyclades Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * $Log: pc300.h,v $ - * Revision 3.12 2002/03/07 14:17:09 henrique - * License data fixed - * - * Revision 3.11 2002/01/28 21:09:39 daniela - * Included ';' after pc300hw.bus. - * - * Revision 3.10 2002/01/17 17:58:52 ivan - * Support for PC300-TE/M (PMC). - * - * Revision 3.9 2001/09/28 13:30:53 daniela - * Renamed dma_start routine to rx_dma_start. - * - * Revision 3.8 2001/09/24 13:03:45 daniela - * Fixed BOF interrupt treatment. Created dma_start routine. - * - * Revision 3.7 2001/08/10 17:19:58 daniela - * Fixed IOCTLs defines. - * - * Revision 3.6 2001/07/18 19:24:42 daniela - * Included kernel version. - * - * Revision 3.5 2001/07/05 18:38:08 daniela - * DMA transmission bug fix. - * - * Revision 3.4 2001/06/26 17:10:40 daniela - * New configuration parameters (line code, CRC calculation and clock). - * - * Revision 3.3 2001/06/22 13:13:02 regina - * MLPPP implementation - * - * Revision 3.2 2001/06/18 17:56:09 daniela - * Increased DEF_MTU and TX_QUEUE_LEN. - * - * Revision 3.1 2001/06/15 12:41:10 regina - * upping major version number - * - * Revision 1.1.1.1 2001/06/13 20:25:06 daniela - * PC300 initial CVS version (3.4.0-pre1) - * - * Revision 2.3 2001/03/05 daniela - * Created struct pc300conf, to provide the hardware information to pc300util. - * Inclusion of 'alloc_ramsize' field on structure 'pc300hw'. - * - * Revision 2.2 2000/12/22 daniela - * Structures and defines to support pc300util: statistics, status, - * loopback tests, trace. - * - * Revision 2.1 2000/09/28 ivan - * Inclusion of 'iophys' and 'iosize' fields on structure 'pc300hw', to - * allow release of I/O region at module unload. - * Changed location of include files. - * - * Revision 2.0 2000/03/27 ivan - * Added support for the PC300/TE cards. - * - * Revision 1.1 2000/01/31 ivan - * Replaced 'pc300[drv|sca].h' former PC300 driver include files. - * - * Revision 1.0 1999/12/16 ivan - * First official release. - * Inclusion of 'nchan' field on structure 'pc300hw', to allow variable - * number of ports per card. - * Inclusion of 'if_ptr' field on structure 'pc300dev'. - * - * Revision 0.6 1999/11/17 ivan - * Changed X.25-specific function names to comply with adopted convention. - * - * Revision 0.5 1999/11/16 Daniela Squassoni - * X.25 support. - * - * Revision 0.4 1999/11/15 ivan - * Inclusion of 'clock' field on structure 'pc300hw'. - * - * Revision 0.3 1999/11/10 ivan - * IOCTL name changing. - * Inclusion of driver function prototypes. - * - * Revision 0.2 1999/11/03 ivan - * Inclusion of 'tx_skb' and union 'ifu' on structure 'pc300dev'. - * - * Revision 0.1 1999/01/15 ivan - * Initial version. - * - */ - -#ifndef _PC300_H -#define _PC300_H - -#include <linux/hdlc.h> -#include <net/syncppp.h> -#include "hd64572.h" -#include "pc300-falc-lh.h" - -#ifndef CY_TYPES -#define CY_TYPES -typedef __u64 ucdouble; /* 64 bits, unsigned */ -typedef __u32 uclong; /* 32 bits, unsigned */ -typedef __u16 ucshort; /* 16 bits, unsigned */ -typedef __u8 ucchar; /* 8 bits, unsigned */ -#endif /* CY_TYPES */ - -#define PC300_PROTO_MLPPP 1 - -#define PC300_KERNEL "2.4.x" /* Kernel supported by this driver */ - -#define PC300_DEVNAME "hdlc" /* Dev. name base (for hdlc0, hdlc1, etc.) */ -#define PC300_MAXINDEX 100 /* Max dev. name index (the '0' in hdlc0) */ - -#define PC300_MAXCARDS 4 /* Max number of cards per system */ -#define PC300_MAXCHAN 2 /* Number of channels per card */ - -#define PC300_PLX_WIN 0x80 /* PLX control window size (128b) */ -#define PC300_RAMSIZE 0x40000 /* RAM window size (256Kb) */ -#define PC300_SCASIZE 0x400 /* SCA window size (1Kb) */ -#define PC300_FALCSIZE 0x400 /* FALC window size (1Kb) */ - -#define PC300_OSC_CLOCK 24576000 -#define PC300_PCI_CLOCK 33000000 - -#define BD_DEF_LEN 0x0800 /* DMA buffer length (2KB) */ -#define DMA_TX_MEMSZ 0x8000 /* Total DMA Tx memory size (32KB/ch) */ -#define DMA_RX_MEMSZ 0x10000 /* Total DMA Rx memory size (64KB/ch) */ - -#define N_DMA_TX_BUF (DMA_TX_MEMSZ / BD_DEF_LEN) /* DMA Tx buffers */ -#define N_DMA_RX_BUF (DMA_RX_MEMSZ / BD_DEF_LEN) /* DMA Rx buffers */ - -/* DMA Buffer Offsets */ -#define DMA_TX_BASE ((N_DMA_TX_BUF + N_DMA_RX_BUF) * \ - PC300_MAXCHAN * sizeof(pcsca_bd_t)) -#define DMA_RX_BASE (DMA_TX_BASE + PC300_MAXCHAN*DMA_TX_MEMSZ) - -/* DMA Descriptor Offsets */ -#define DMA_TX_BD_BASE 0x0000 -#define DMA_RX_BD_BASE (DMA_TX_BD_BASE + ((PC300_MAXCHAN*DMA_TX_MEMSZ / \ - BD_DEF_LEN) * sizeof(pcsca_bd_t))) - -/* DMA Descriptor Macros */ -#define TX_BD_ADDR(chan, n) (DMA_TX_BD_BASE + \ - ((N_DMA_TX_BUF*chan) + n) * sizeof(pcsca_bd_t)) -#define RX_BD_ADDR(chan, n) (DMA_RX_BD_BASE + \ - ((N_DMA_RX_BUF*chan) + n) * sizeof(pcsca_bd_t)) - -/* Macro to access the FALC registers (TE only) */ -#define F_REG(reg, chan) (0x200*(chan) + ((reg)<<2)) - -/*************************************** - * Memory access functions/macros * - * (required to support Alpha systems) * - ***************************************/ -#ifdef __KERNEL__ -#define cpc_writeb(port,val) {writeb((ucchar)(val),(port)); mb();} -#define cpc_writew(port,val) {writew((ushort)(val),(port)); mb();} -#define cpc_writel(port,val) {writel((uclong)(val),(port)); mb();} - -#define cpc_readb(port) readb(port) -#define cpc_readw(port) readw(port) -#define cpc_readl(port) readl(port) - -#else /* __KERNEL__ */ -#define cpc_writeb(port,val) (*(volatile ucchar *)(port) = (ucchar)(val)) -#define cpc_writew(port,val) (*(volatile ucshort *)(port) = (ucshort)(val)) -#define cpc_writel(port,val) (*(volatile uclong *)(port) = (uclong)(val)) - -#define cpc_readb(port) (*(volatile ucchar *)(port)) -#define cpc_readw(port) (*(volatile ucshort *)(port)) -#define cpc_readl(port) (*(volatile uclong *)(port)) - -#endif /* __KERNEL__ */ - -/****** Data Structures *****************************************************/ - -/* - * RUNTIME_9050 - PLX PCI9050-1 local configuration and shared runtime - * registers. This structure can be used to access the 9050 registers - * (memory mapped). - */ -struct RUNTIME_9050 { - uclong loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */ - uclong loc_rom_range; /* 10h : Local ROM Range */ - uclong loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */ - uclong loc_rom_base; /* 24h : Local ROM Base */ - uclong loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */ - uclong rom_bus_descr; /* 38h : ROM Bus Descriptor */ - uclong cs_base[4]; /* 3C-48h : Chip Select Base Addrs */ - uclong intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */ - uclong init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */ -}; - -#define PLX_9050_LINT1_ENABLE 0x01 -#define PLX_9050_LINT1_POL 0x02 -#define PLX_9050_LINT1_STATUS 0x04 -#define PLX_9050_LINT2_ENABLE 0x08 -#define PLX_9050_LINT2_POL 0x10 -#define PLX_9050_LINT2_STATUS 0x20 -#define PLX_9050_INTR_ENABLE 0x40 -#define PLX_9050_SW_INTR 0x80 - -/* Masks to access the init_ctrl PLX register */ -#define PC300_CLKSEL_MASK (0x00000004UL) -#define PC300_CHMEDIA_MASK(chan) (0x00000020UL<<(chan*3)) -#define PC300_CTYPE_MASK (0x00000800UL) - -/* CPLD Registers (base addr = falcbase, TE only) */ -/* CPLD v. 0 */ -#define CPLD_REG1 0x140 /* Chip resets, DCD/CTS status */ -#define CPLD_REG2 0x144 /* Clock enable , LED control */ -/* CPLD v. 2 or higher */ -#define CPLD_V2_REG1 0x100 /* Chip resets, DCD/CTS status */ -#define CPLD_V2_REG2 0x104 /* Clock enable , LED control */ -#define CPLD_ID_REG 0x108 /* CPLD version */ - -/* CPLD Register bit description: for the FALC bits, they should always be - set based on the channel (use (bit<<(2*ch)) to access the correct bit for - that channel) */ -#define CPLD_REG1_FALC_RESET 0x01 -#define CPLD_REG1_SCA_RESET 0x02 -#define CPLD_REG1_GLOBAL_CLK 0x08 -#define CPLD_REG1_FALC_DCD 0x10 -#define CPLD_REG1_FALC_CTS 0x20 - -#define CPLD_REG2_FALC_TX_CLK 0x01 -#define CPLD_REG2_FALC_RX_CLK 0x02 -#define CPLD_REG2_FALC_LED1 0x10 -#define CPLD_REG2_FALC_LED2 0x20 - -/* Structure with FALC-related fields (TE only) */ -#define PC300_FALC_MAXLOOP 0x0000ffff /* for falc_issue_cmd() */ - -typedef struct falc { - ucchar sync; /* If true FALC is synchronized */ - ucchar active; /* if TRUE then already active */ - ucchar loop_active; /* if TRUE a line loopback UP was received */ - ucchar loop_gen; /* if TRUE a line loopback UP was issued */ - - ucchar num_channels; - ucchar offset; /* 1 for T1, 0 for E1 */ - ucchar full_bandwidth; - - ucchar xmb_cause; - ucchar multiframe_mode; - - /* Statistics */ - ucshort pden; /* Pulse Density violation count */ - ucshort los; /* Loss of Signal count */ - ucshort losr; /* Loss of Signal recovery count */ - ucshort lfa; /* Loss of frame alignment count */ - ucshort farec; /* Frame Alignment Recovery count */ - ucshort lmfa; /* Loss of multiframe alignment count */ - ucshort ais; /* Remote Alarm indication Signal count */ - ucshort sec; /* One-second timer */ - ucshort es; /* Errored second */ - ucshort rai; /* remote alarm received */ - ucshort bec; - ucshort fec; - ucshort cvc; - ucshort cec; - ucshort ebc; - - /* Status */ - ucchar red_alarm; - ucchar blue_alarm; - ucchar loss_fa; - ucchar yellow_alarm; - ucchar loss_mfa; - ucchar prbs; -} falc_t; - -typedef struct falc_status { - ucchar sync; /* If true FALC is synchronized */ - ucchar red_alarm; - ucchar blue_alarm; - ucchar loss_fa; - ucchar yellow_alarm; - ucchar loss_mfa; - ucchar prbs; -} falc_status_t; - -typedef struct rsv_x21_status { - ucchar dcd; - ucchar dsr; - ucchar cts; - ucchar rts; - ucchar dtr; -} rsv_x21_status_t; - -typedef struct pc300stats { - int hw_type; - uclong line_on; - uclong line_off; - struct net_device_stats gen_stats; - falc_t te_stats; -} pc300stats_t; - -typedef struct pc300status { - int hw_type; - rsv_x21_status_t gen_status; - falc_status_t te_status; -} pc300status_t; - -typedef struct pc300loopback { - char loop_type; - char loop_on; -} pc300loopback_t; - -typedef struct pc300patterntst { - char patrntst_on; /* 0 - off; 1 - on; 2 - read num_errors */ - ucshort num_errors; -} pc300patterntst_t; - -typedef struct pc300dev { - void *if_ptr; /* General purpose pointer */ - struct pc300ch *chan; - ucchar trace_on; - uclong line_on; /* DCD(X.21, RSV) / sync(TE) change counters */ - uclong line_off; -#ifdef __KERNEL__ - char name[16]; - struct net_device *dev; - - void *private; - struct sk_buff *tx_skb; - union { /* This union has all the protocol-specific structures */ - struct ppp_device pppdev; - }ifu; -#ifdef CONFIG_PC300_MLPPP - void *cpc_tty; /* information to PC300 TTY driver */ -#endif -#endif /* __KERNEL__ */ -}pc300dev_t; - -typedef struct pc300hw { - int type; /* RSV, X21, etc. */ - int bus; /* Bus (PCI, PMC, etc.) */ - int nchan; /* number of channels */ - int irq; /* interrupt request level */ - uclong clock; /* Board clock */ - ucchar cpld_id; /* CPLD ID (TE only) */ - ucshort cpld_reg1; /* CPLD reg 1 (TE only) */ - ucshort cpld_reg2; /* CPLD reg 2 (TE only) */ - ucshort gpioc_reg; /* PLX GPIOC reg */ - ucshort intctl_reg; /* PLX Int Ctrl/Status reg */ - uclong iophys; /* PLX registers I/O base */ - uclong iosize; /* PLX registers I/O size */ - uclong plxphys; /* PLX registers MMIO base (physical) */ - void __iomem * plxbase; /* PLX registers MMIO base (virtual) */ - uclong plxsize; /* PLX registers MMIO size */ - uclong scaphys; /* SCA registers MMIO base (physical) */ - void __iomem * scabase; /* SCA registers MMIO base (virtual) */ - uclong scasize; /* SCA registers MMIO size */ - uclong ramphys; /* On-board RAM MMIO base (physical) */ - void __iomem * rambase; /* On-board RAM MMIO base (virtual) */ - uclong alloc_ramsize; /* RAM MMIO size allocated by the PCI bridge */ - uclong ramsize; /* On-board RAM MMIO size */ - uclong falcphys; /* FALC registers MMIO base (physical) */ - void __iomem * falcbase;/* FALC registers MMIO base (virtual) */ - uclong falcsize; /* FALC registers MMIO size */ -} pc300hw_t; - -typedef struct pc300chconf { - sync_serial_settings phys_settings; /* Clock type/rate (in bps), - loopback mode */ - raw_hdlc_proto proto_settings; /* Encoding, parity (CRC) */ - uclong media; /* HW media (RS232, V.35, etc.) */ - uclong proto; /* Protocol (PPP, X.25, etc.) */ - ucchar monitor; /* Monitor mode (0 = off, !0 = on) */ - - /* TE-specific parameters */ - ucchar lcode; /* Line Code (AMI, B8ZS, etc.) */ - ucchar fr_mode; /* Frame Mode (ESF, D4, etc.) */ - ucchar lbo; /* Line Build Out */ - ucchar rx_sens; /* Rx Sensitivity (long- or short-haul) */ - uclong tslot_bitmap; /* bit[i]=1 => timeslot _i_ is active */ -} pc300chconf_t; - -typedef struct pc300ch { - struct pc300 *card; - int channel; - pc300dev_t d; - pc300chconf_t conf; - ucchar tx_first_bd; /* First TX DMA block descr. w/ data */ - ucchar tx_next_bd; /* Next free TX DMA block descriptor */ - ucchar rx_first_bd; /* First free RX DMA block descriptor */ - ucchar rx_last_bd; /* Last free RX DMA block descriptor */ - ucchar nfree_tx_bd; /* Number of free TX DMA block descriptors */ - falc_t falc; /* FALC structure (TE only) */ -} pc300ch_t; - -typedef struct pc300 { - pc300hw_t hw; /* hardware config. */ - pc300ch_t chan[PC300_MAXCHAN]; -#ifdef __KERNEL__ - spinlock_t card_lock; -#endif /* __KERNEL__ */ -} pc300_t; - -typedef struct pc300conf { - pc300hw_t hw; - pc300chconf_t conf; -} pc300conf_t; - -/* DEV ioctl() commands */ -#define N_SPPP_IOCTLS 2 - -enum pc300_ioctl_cmds { - SIOCCPCRESERVED = (SIOCDEVPRIVATE + N_SPPP_IOCTLS), - SIOCGPC300CONF, - SIOCSPC300CONF, - SIOCGPC300STATUS, - SIOCGPC300FALCSTATUS, - SIOCGPC300UTILSTATS, - SIOCGPC300UTILSTATUS, - SIOCSPC300TRACE, - SIOCSPC300LOOPBACK, - SIOCSPC300PATTERNTEST, -}; - -/* Loopback types - PC300/TE boards */ -enum pc300_loopback_cmds { - PC300LOCLOOP = 1, - PC300REMLOOP, - PC300PAYLOADLOOP, - PC300GENLOOPUP, - PC300GENLOOPDOWN, -}; - -/* Control Constant Definitions */ -#define PC300_RSV 0x01 -#define PC300_X21 0x02 -#define PC300_TE 0x03 - -#define PC300_PCI 0x00 -#define PC300_PMC 0x01 - -#define PC300_LC_AMI 0x01 -#define PC300_LC_B8ZS 0x02 -#define PC300_LC_NRZ 0x03 -#define PC300_LC_HDB3 0x04 - -/* Framing (T1) */ -#define PC300_FR_ESF 0x01 -#define PC300_FR_D4 0x02 -#define PC300_FR_ESF_JAPAN 0x03 - -/* Framing (E1) */ -#define PC300_FR_MF_CRC4 0x04 -#define PC300_FR_MF_NON_CRC4 0x05 -#define PC300_FR_UNFRAMED 0x06 - -#define PC300_LBO_0_DB 0x00 -#define PC300_LBO_7_5_DB 0x01 -#define PC300_LBO_15_DB 0x02 -#define PC300_LBO_22_5_DB 0x03 - -#define PC300_RX_SENS_SH 0x01 -#define PC300_RX_SENS_LH 0x02 - -#define PC300_TX_TIMEOUT (2*HZ) -#define PC300_TX_QUEUE_LEN 100 -#define PC300_DEF_MTU 1600 - -#ifdef __KERNEL__ -/* Function Prototypes */ -void tx_dma_start(pc300_t *, int); -int cpc_open(struct net_device *dev); -int cpc_set_media(hdlc_device *, int); -#endif /* __KERNEL__ */ - -#endif /* _PC300_H */ - |