1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/net/wan/lmc/lmc_ioctl.h b/drivers/net/wan/lmc/lmc_ioctl.h
index 57dd861cd3d..72fb113a44c 100644
--- a/drivers/net/wan/lmc/lmc_ioctl.h
+++ b/drivers/net/wan/lmc/lmc_ioctl.h
@@ -61,7 +61,7 @@
 /*
  * IFTYPE defines
  */
-#define LMC_PPP         1               /* use sppp interface */
+#define LMC_PPP         1               /* use generic HDLC interface */
 #define LMC_NET         2               /* use direct net interface */
 #define LMC_RAW         3               /* use direct net interface */
 
diff --git a/arch/arc/Kbuild b/arch/arc/Kbuild
new file mode 100644
index 00000000000..082d329d324
--- /dev/null
+++ b/arch/arc/Kbuild
@@ -0,0 +1,2 @@
+obj-y += kernel/
+obj-y += mm/
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
new file mode 100644
index 00000000000..9596b0ab108
--- /dev/null
+++ b/arch/arc/Kconfig
@@ -0,0 +1,432 @@
+#
+# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+
+config ARC
+	def_bool y
+	select BUILDTIME_EXTABLE_SORT
+	select CLONE_BACKWARDS
+	# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
+	select DEVTMPFS if !INITRAMFS_SOURCE=""
+	select GENERIC_ATOMIC64
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_FIND_FIRST_BIT
+	# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
+	select GENERIC_IRQ_SHOW
+	select GENERIC_PENDING_IRQ if SMP
+	select GENERIC_SMP_IDLE_THREAD
+	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_IOREMAP_PROT
+	select HAVE_KPROBES
+	select HAVE_KRETPROBES
+	select HAVE_MEMBLOCK
+	select HAVE_MOD_ARCH_SPECIFIC if ARC_DW2_UNWIND
+	select HAVE_OPROFILE
+	select HAVE_PERF_EVENTS
+	select IRQ_DOMAIN
+	select MODULES_USE_ELF_RELA
+	select NO_BOOTMEM
+	select OF
+	select OF_EARLY_FLATTREE
+	select PERF_USE_VMALLOC
+	select HAVE_DEBUG_STACKOVERFLOW
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config SCHED_OMIT_FRAME_POINTER
+	def_bool y
+
+config GENERIC_CSUM
+	def_bool y
+
+config RWSEM_GENERIC_SPINLOCK
+	def_bool y
+
+config ARCH_FLATMEM_ENABLE
+	def_bool y
+
+config MMU
+	def_bool y
+
+config NO_IOPORT_MAP
+	def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+	def_bool y
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+	select STACKTRACE
+
+config HAVE_LATENCYTOP_SUPPORT
+	def_bool y
+
+config NO_DMA
+	def_bool n
+
+source "init/Kconfig"
+source "kernel/Kconfig.freezer"
+
+menu "ARC Architecture Configuration"
+
+menu "ARC Platform/SoC/Board"
+
+source "arch/arc/plat-arcfpga/Kconfig"
+source "arch/arc/plat-tb10x/Kconfig"
+#New platform adds here
+
+endmenu
+
+menu "ARC CPU Configuration"
+
+choice
+	prompt "ARC Core"
+	default ARC_CPU_770
+
+config ARC_CPU_750D
+	bool "ARC750D"
+	help
+	  Support for ARC750 core
+
+config ARC_CPU_770
+	bool "ARC770"
+	select ARC_CPU_REL_4_10
+	help
+	  Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
+	  This core has a bunch of cool new features:
+	  -MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4)
+                   Shared Address Spaces (for sharing TLB entires in MMU)
+	  -Caches: New Prog Model, Region Flush
+	  -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
+
+endchoice
+
+config CPU_BIG_ENDIAN
+	bool "Enable Big Endian Mode"
+	default n
+	help
+	  Build kernel for Big Endian Mode of ARC CPU
+
+# If a platform can't work with 0x8000_0000 based dma_addr_t
+config ARC_PLAT_NEEDS_CPU_TO_DMA
+	bool
+
+config SMP
+	bool "Symmetric Multi-Processing (Incomplete)"
+	default n
+	help
+	  This enables support for systems with more than one CPU. If you have
+	  a system with only one CPU, say N. If you have a system with more
+	  than one CPU, say Y.
+
+if SMP
+
+config ARC_HAS_COH_CACHES
+	def_bool n
+
+config ARC_HAS_REENTRANT_IRQ_LV2
+	def_bool n
+
+endif
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-4096)"
+	range 2 4096
+	depends on SMP
+	default "2"
+
+menuconfig ARC_CACHE
+	bool "Enable Cache Support"
+	default y
+	# if SMP, cache enabled ONLY if ARC implementation has cache coherency
+	depends on !SMP || ARC_HAS_COH_CACHES
+
+if ARC_CACHE
+
+config ARC_CACHE_LINE_SHIFT
+	int "Cache Line Length (as power of 2)"
+	range 5 7
+	default "6"
+	help
+	  Starting with ARC700 4.9, Cache line length is configurable,
+	  This option specifies "N", with Line-len = 2 power N
+	  So line lengths of 32, 64, 128 are specified by 5,6,7, respectively
+	  Linux only supports same line lengths for I and D caches.
+
+config ARC_HAS_ICACHE
+	bool "Use Instruction Cache"
+	default y
+
+config ARC_HAS_DCACHE
+	bool "Use Data Cache"
+	default y
+
+config ARC_CACHE_PAGES
+	bool "Per Page Cache Control"
+	default y
+	depends on ARC_HAS_ICACHE || ARC_HAS_DCACHE
+	help
+	  This can be used to over-ride the global I/D Cache Enable on a
+	  per-page basis (but only for pages accessed via MMU such as
+	  Kernel Virtual address or User Virtual Address)
+	  TLB entries have a per-page Cache Enable Bit.
+	  Note that Global I/D ENABLE + Per Page DISABLE works but corollary
+	  Global DISABLE + Per Page ENABLE won't work
+
+config ARC_CACHE_VIPT_ALIASING
+	bool "Support VIPT Aliasing D$"
+	depends on ARC_HAS_DCACHE
+	default n
+
+endif	#ARC_CACHE
+
+config ARC_HAS_ICCM
+	bool "Use ICCM"
+	help
+	  Single Cycle RAMS to store Fast Path Code
+	default n
+
+config ARC_ICCM_SZ
+	int "ICCM Size in KB"
+	default "64"
+	depends on ARC_HAS_ICCM
+
+config ARC_HAS_DCCM
+	bool "Use DCCM"
+	help
+	  Single Cycle RAMS to store Fast Path Data
+	default n
+
+config ARC_DCCM_SZ
+	int "DCCM Size in KB"
+	default "64"
+	depends on ARC_HAS_DCCM
+
+config ARC_DCCM_BASE
+	hex "DCCM map address"
+	default "0xA0000000"
+	depends on ARC_HAS_DCCM
+
+config ARC_HAS_HW_MPY
+	bool "Use Hardware Multiplier (Normal or Faster XMAC)"
+	default y
+	help
+	  Influences how gcc generates code for MPY operations.
+	  If enabled, MPYxx insns are generated, provided by Standard/XMAC
+	  Multipler. Otherwise software multipy lib is used
+
+choice
+	prompt "ARC700 MMU Version"
+	default ARC_MMU_V3 if ARC_CPU_770
+	default ARC_MMU_V2 if ARC_CPU_750D
+
+config ARC_MMU_V1
+	bool "MMU v1"
+	help
+	  Orig ARC700 MMU
+
+config ARC_MMU_V2
+	bool "MMU v2"
+	help
+	  Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio
+	  when 2 D-TLB and 1 I-TLB entries index into same 2way set.
+
+config ARC_MMU_V3
+	bool "MMU v3"
+	depends on ARC_CPU_770
+	help
+	  Introduced with ARC700 4.10: New Features
+	  Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
+	  Shared Address Spaces (SASID)
+
+endchoice
+
+
+choice
+	prompt "MMU Page Size"
+	default ARC_PAGE_SIZE_8K
+
+config ARC_PAGE_SIZE_8K
+	bool "8KB"
+	help
+	  Choose between 8k vs 16k
+
+config ARC_PAGE_SIZE_16K
+	bool "16KB"
+	depends on ARC_MMU_V3
+
+config ARC_PAGE_SIZE_4K
+	bool "4KB"
+	depends on ARC_MMU_V3
+
+endchoice
+
+config ARC_COMPACT_IRQ_LEVELS
+	bool "ARCompact IRQ Priorities: High(2)/Low(1)"
+	default n
+	# Timer HAS to be high priority, for any other high priority config
+	select ARC_IRQ3_LV2
+	# if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
+	depends on !SMP || ARC_HAS_REENTRANT_IRQ_LV2
+
+if ARC_COMPACT_IRQ_LEVELS
+
+config ARC_IRQ3_LV2
+	bool
+
+config ARC_IRQ5_LV2
+	bool
+
+config ARC_IRQ6_LV2
+	bool
+
+endif
+
+config ARC_FPU_SAVE_RESTORE
+	bool "Enable FPU state persistence across context switch"
+	default n
+	help
+	  Double Precision Floating Point unit had dedictaed regs which
+	  need to be saved/restored across context-switch.
+	  Note that ARC FPU is overly simplistic, unlike say x86, which has
+	  hardware pieces to allow software to conditionally save/restore,
+	  based on actual usage of FPU by a task. Thus our implemn does
+	  this for all tasks in system.
+
+config ARC_CANT_LLSC
+	def_bool n
+
+menuconfig ARC_CPU_REL_4_10
+	bool "Enable support for Rel 4.10 features"
+	default n
+	help
+	  -ARC770 (and dependent features) enabled
+	  -ARC750 also shares some of the new features with 770
+
+config ARC_HAS_LLSC
+	bool "Insn: LLOCK/SCOND (efficient atomic ops)"
+	default y
+	depends on ARC_CPU_770 && !ARC_CANT_LLSC
+
+config ARC_HAS_SWAPE
+	bool "Insn: SWAPE (endian-swap)"
+	default y
+	depends on ARC_CPU_REL_4_10
+
+config ARC_HAS_RTSC
+	bool "Insn: RTSC (64-bit r/o cycle counter)"
+	default y
+	depends on ARC_CPU_REL_4_10
+	depends on !SMP
+
+endmenu   # "ARC CPU Configuration"
+
+config LINUX_LINK_BASE
+	hex "Linux Link Address"
+	default "0x80000000"
+	help
+	  ARC700 divides the 32 bit phy address space into two equal halves
+	  -Lower 2G (0 - 0x7FFF_FFFF ) is user virtual, translated by MMU
+	  -Upper 2G (0x8000_0000 onwards) is untranslated, for kernel
+	  Typically Linux kernel is linked at the start of untransalted addr,
+	  hence the default value of 0x8zs.
+	  However some customers have peripherals mapped at this addr, so
+	  Linux needs to be scooted a bit.
+	  If you don't know what the above means, leave this setting alone.
+
+config ARC_CURR_IN_REG
+	bool "Dedicate Register r25 for current_task pointer"
+	default y
+	help
+	  This reserved Register R25 to point to Current Task in
+	  kernel mode. This saves memory access for each such access
+
+
+config ARC_MISALIGN_ACCESS
+	bool "Emulate unaligned memory access (userspace only)"
+	select SYSCTL_ARCH_UNALIGN_NO_WARN
+	select SYSCTL_ARCH_UNALIGN_ALLOW
+	help
+	  This enables misaligned 16 & 32 bit memory access from user space.
+	  Use ONLY-IF-ABS-NECESSARY as it will be very slow and also can hide
+	  potential bugs in code
+
+config HZ
+	int "Timer Frequency"
+	default 100
+
+config ARC_METAWARE_HLINK
+	bool "Support for Metaware debugger assisted Host access"
+	default n
+	help
+	  This options allows a Linux userland apps to directly access
+	  host file system (open/creat/read/write etc) with help from
+	  Metaware Debugger. This can come in handy for Linux-host communication
+	  when there is no real usable peripheral such as EMAC.
+
+menuconfig ARC_DBG
+	bool "ARC debugging"
+	default y
+
+config ARC_DW2_UNWIND
+	bool "Enable DWARF specific kernel stack unwind"
+	depends on ARC_DBG
+	default y
+	select KALLSYMS
+	help
+	  Compiles the kernel with DWARF unwind information and can be used
+	  to get stack backtraces.
+
+	  If you say Y here the resulting kernel image will be slightly larger
+	  but not slower, and it will give very useful debugging information.
+	  If you don't debug the kernel, you can say N, but we may not be able
+	  to solve problems without frame unwind information
+
+config ARC_DBG_TLB_PARANOIA
+	bool "Paranoia Checks in Low Level TLB Handlers"
+	depends on ARC_DBG
+	default n
+
+config ARC_DBG_TLB_MISS_COUNT
+	bool "Profile TLB Misses"
+	default n
+	select DEBUG_FS
+	depends on ARC_DBG
+	help
+	  Counts number of I and D TLB Misses and exports them via Debugfs
+	  The counters can be cleared via Debugfs as well
+
+config ARC_BUILTIN_DTB_NAME
+	string "Built in DTB"
+	help
+	  Set the name of the DTB to embed in the vmlinux binary
+	  Leaving it blank selects the minimal "skeleton" dtb
+
+source "kernel/Kconfig.preempt"
+
+menu "Executable file formats"
+source "fs/Kconfig.binfmt"
+endmenu
+
+endmenu	 # "ARC Architecture Configuration"
+
+source "mm/Kconfig"
+source "net/Kconfig"
+source "drivers/Kconfig"
+source "fs/Kconfig"
+source "arch/arc/Kconfig.debug"
+source "security/Kconfig"
+source "crypto/Kconfig"
+source "lib/Kconfig"
diff --git a/arch/arc/Kconfig.debug b/arch/arc/Kconfig.debug
new file mode 100644
index 00000000000..a7fc0da2565
--- /dev/null
+++ b/arch/arc/Kconfig.debug
@@ -0,0 +1,27 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config EARLY_PRINTK
+	bool "Early printk" if EMBEDDED
+	default y
+	help
+	  Write kernel log output directly into the VGA buffer or to a serial
+	  port.
+
+	  This is useful for kernel debugging when your machine crashes very
+	  early before the console code is initialized. For normal operation
+	  it is not recommended because it looks ugly and doesn't cooperate
+	  with klogd/syslogd or the X server. You should normally N here,
+	  unless you want to debug such a crash.
+
+config 16KSTACKS
+	bool "Use 16Kb for kernel stacks instead of 8Kb"
+	help
+	  If you say Y here the kernel will use a  16Kb stacksize for the
+	  kernel stack attached to each process/thread. The default is 8K.
+	  This increases the resident kernel footprint and will cause less
+	  threads to run on the system and also increase the pressure
+	  on the VM subsystem for higher order allocations.
+
+endmenu
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
new file mode 100644
index 00000000000..8c0b1aa56f7
--- /dev/null
+++ b/arch/arc/Makefile
@@ -0,0 +1,139 @@
+#
+# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+
+UTS_MACHINE := arc
+
+ifeq ($(CROSS_COMPILE),)
+CROSS_COMPILE := arc-linux-uclibc-
+endif
+
+KBUILD_DEFCONFIG := fpga_defconfig
+
+cflags-y	+= -mA7 -fno-common -pipe -fno-builtin -D__linux__
+
+ifdef CONFIG_ARC_CURR_IN_REG
+# For a global register defintion, make sure it gets passed to every file
+# We had a customer reported bug where some code built in kernel was NOT using
+# any kernel headers, and missing the r25 global register
+# Can't do unconditionally because of recursive include issues
+# due to <linux/thread_info.h>
+LINUXINCLUDE	+=  -include ${src}/arch/arc/include/asm/current.h
+endif
+
+upto_gcc42    :=  $(call cc-ifversion, -le, 0402, y)
+upto_gcc44    :=  $(call cc-ifversion, -le, 0404, y)
+atleast_gcc44 :=  $(call cc-ifversion, -ge, 0404, y)
+atleast_gcc48 :=  $(call cc-ifversion, -ge, 0408, y)
+
+cflags-$(atleast_gcc44)			+= -fsection-anchors
+
+cflags-$(CONFIG_ARC_HAS_LLSC)		+= -mlock
+cflags-$(CONFIG_ARC_HAS_SWAPE)		+= -mswape
+cflags-$(CONFIG_ARC_HAS_RTSC)		+= -mrtsc
+cflags-$(CONFIG_ARC_DW2_UNWIND)		+= -fasynchronous-unwind-tables
+
+# By default gcc 4.8 generates dwarf4 which kernel unwinder can't grok
+ifeq ($(atleast_gcc48),y)
+cflags-$(CONFIG_ARC_DW2_UNWIND)		+= -gdwarf-2
+endif
+
+ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
+# Generic build system uses -O2, we want -O3
+cflags-y  += -O3
+endif
+
+# small data is default for elf32 tool-chain. If not usable, disable it
+# This also allows repurposing GP as scratch reg to gcc reg allocator
+disable_small_data := y
+cflags-$(disable_small_data)		+= -mno-sdata -fcall-used-gp
+
+cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mbig-endian
+ldflags-$(CONFIG_CPU_BIG_ENDIAN)	+= -EB
+
+# STAR 9000518362: (fixed with binutils shipping with gcc 4.8)
+# arc-linux-uclibc-ld (buildroot) or arceb-elf32-ld (EZChip) don't accept
+# --build-id w/o "-marclinux". Default arc-elf32-ld is OK
+ldflags-$(upto_gcc44)			+= -marclinux
+
+ARC_LIBGCC				:= -mA7
+cflags-$(CONFIG_ARC_HAS_HW_MPY)		+= -multcost=16
+
+ifndef CONFIG_ARC_HAS_HW_MPY
+	cflags-y	+= -mno-mpy
+
+# newlib for ARC700 assumes MPY to be always present, which is generally true
+# However, if someone really doesn't want MPY, we need to use the 600 ver
+# which coupled with -mno-mpy will use mpy emulation
+# With gcc 4.4.7, -mno-mpy is enough to make any other related adjustments,
+# e.g. increased cost of MPY. With gcc 4.2.1 this had to be explicitly hinted
+
+	ifeq ($(upto_gcc42),y)
+		ARC_LIBGCC	:= -marc600
+		cflags-y	+= -multcost=30
+	endif
+endif
+
+LIBGCC	:= $(shell $(CC) $(ARC_LIBGCC) $(cflags-y) --print-libgcc-file-name)
+
+# Modules with short calls might break for calls into builtin-kernel
+KBUILD_CFLAGS_MODULE	+= -mlong-calls
+
+# Finally dump eveything into kernel build system
+KBUILD_CFLAGS	+= $(cflags-y)
+KBUILD_AFLAGS	+= $(KBUILD_CFLAGS)
+LDFLAGS		+= $(ldflags-y)
+
+head-y		:= arch/arc/kernel/head.o
+
+# See arch/arc/Kbuild for content of core part of the kernel
+core-y		+= arch/arc/
+
+# w/o this dtb won't embed into kernel binary
+core-y		+= arch/arc/boot/dts/
+
+core-$(CONFIG_ARC_PLAT_FPGA_LEGACY)	+= arch/arc/plat-arcfpga/
+core-$(CONFIG_ARC_PLAT_TB10X)		+= arch/arc/plat-tb10x/
+
+drivers-$(CONFIG_OPROFILE)	+= arch/arc/oprofile/
+
+libs-y		+= arch/arc/lib/ $(LIBGCC)
+
+boot		:= arch/arc/boot
+
+#default target for make without any arguements.
+KBUILD_IMAGE	:= bootpImage
+
+all:	$(KBUILD_IMAGE)
+bootpImage: vmlinux
+
+boot_targets += uImage uImage.bin uImage.gz
+
+$(boot_targets): vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+%.dtb %.dtb.S %.dtb.o: scripts
+	$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
+
+dtbs: scripts
+	$(Q)$(MAKE) $(build)=$(boot)/dts dtbs
+
+archclean:
+	$(Q)$(MAKE) $(clean)=$(boot)
+
+# Hacks to enable final link due to absence of link-time branch relexation
+# and gcc choosing optimal(shorter) branches at -O3
+#
+# vineetg Feb 2010: -mlong-calls switched off for overall kernel build
+# However lib/decompress_inflate.o (.init.text) calls
+# zlib_inflate_workspacesize (.text) causing relocation errors.
+# Thus forcing all exten calls in this file to be long calls
+export CFLAGS_decompress_inflate.o = -mmedium-calls
+export CFLAGS_initramfs.o = -mmedium-calls
+ifdef CONFIG_SMP
+export CFLAGS_core.o = -mmedium-calls
+endif
diff --git a/arch/arc/boot/.gitignore b/arch/arc/boot/.gitignore
new file mode 100644
index 00000000000..5246969a20c
--- /dev/null
+++ b/arch/arc/boot/.gitignore
@@ -0,0 +1,2 @@
+*.dtb*
+uImage
diff --git a/arch/arc/boot/Makefile b/arch/arc/boot/Makefile
new file mode 100644
index 00000000000..e597cb34c16
--- /dev/null
+++ b/arch/arc/boot/Makefile
@@ -0,0 +1,35 @@
+targets := vmlinux.bin vmlinux.bin.gz uImage
+
+# uImage build relies on mkimage being availble on your host for ARC target
+# You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage
+# and make sure it's reacable from your PATH
+
+OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S
+
+LINUX_START_TEXT = $$(readelf -h vmlinux | \
+			grep "Entry point address" | grep -o 0x.*)
+
+UIMAGE_LOADADDR    = $(CONFIG_LINUX_LINK_BASE)
+UIMAGE_ENTRYADDR   = $(LINUX_START_TEXT)
+
+suffix-y := bin
+suffix-$(CONFIG_KERNEL_GZIP)	:= gz
+
+targets += uImage uImage.bin uImage.gz
+extra-y += vmlinux.bin vmlinux.bin.gz
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,gzip)
+
+$(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,uimage,none)
+
+$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,uimage,gzip)
+
+$(obj)/uImage: $(obj)/uImage.$(suffix-y)
+	@ln -sf $(notdir $<) $@
+	@echo '  Image $@ is ready'
diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile
new file mode 100644
index 00000000000..faf240e29ec
--- /dev/null
+++ b/arch/arc/boot/dts/Makefile
@@ -0,0 +1,15 @@
+# Built-in dtb
+builtindtb-y		:= angel4
+
+ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),"")
+	builtindtb-y	:= $(patsubst "%",%,$(CONFIG_ARC_BUILTIN_DTB_NAME))
+endif
+
+obj-y   += $(builtindtb-y).dtb.o
+targets += $(builtindtb-y).dtb
+
+.SECONDARY: $(obj)/$(builtindtb-y).dtb.S
+
+dtbs:  $(addprefix  $(obj)/, $(builtindtb-y).dtb)
+
+clean-files := *.dtb  *.dtb.S
diff --git a/arch/arc/boot/dts/abilis_tb100.dtsi b/arch/arc/boot/dts/abilis_tb100.dtsi
new file mode 100644
index 00000000000..3942634f805
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb100.dtsi
@@ -0,0 +1,350 @@
+/*
+ * Abilis Systems TB100 SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/include/ "abilis_tb10x.dtsi"
+
+
+/ {
+	clock-frequency		= <500000000>;	/* 500 MHZ */
+
+	soc100 {
+		bus-frequency	= <166666666>;
+
+		pll0: oscillator {
+			clock-frequency  = <1000000000>;
+		};
+		cpu_clk: clkdiv_cpu {
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+		ahb_clk: clkdiv_ahb {
+			clock-mult = <1>;
+			clock-div = <6>;
+		};
+
+		iomux: iomux@FF10601c {
+			/* Port 1 */
+			pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
+				abilis,function = "mis0";
+			};
+			pctl_tsin_s1: pctl-tsin-s1 {   /* Serial TS-in 1 */
+				abilis,function = "mis1";
+			};
+			pctl_gpio_a: pctl-gpio-a {     /* GPIO bank A */
+				abilis,function = "gpioa";
+			};
+			pctl_tsin_p1: pctl-tsin-p1 {   /* Parallel TS-in 1 */
+				abilis,function = "mip1";
+			};
+			/* Port 2 */
+			pctl_tsin_s2: pctl-tsin-s2 {   /* Serial TS-in 2 */
+				abilis,function = "mis2";
+			};
+			pctl_tsin_s3: pctl-tsin-s3 {   /* Serial TS-in 3 */
+				abilis,function = "mis3";
+			};
+			pctl_gpio_c: pctl-gpio-c {     /* GPIO bank C */
+				abilis,function = "gpioc";
+			};
+			pctl_tsin_p3: pctl-tsin-p3 {   /* Parallel TS-in 3 */
+				abilis,function = "mip3";
+			};
+			/* Port 3 */
+			pctl_tsin_s4: pctl-tsin-s4 {   /* Serial TS-in 4 */
+				abilis,function = "mis4";
+			};
+			pctl_tsin_s5: pctl-tsin-s5 {   /* Serial TS-in 5 */
+				abilis,function = "mis5";
+			};
+			pctl_gpio_e: pctl-gpio-e {     /* GPIO bank E */
+				abilis,function = "gpioe";
+			};
+			pctl_tsin_p5: pctl-tsin-p5 {   /* Parallel TS-in 5 */
+				abilis,function = "mip5";
+			};
+			/* Port 4 */
+			pctl_tsin_s6: pctl-tsin-s6 {   /* Serial TS-in 6 */
+				abilis,function = "mis6";
+			};
+			pctl_tsin_s7: pctl-tsin-s7 {   /* Serial TS-in 7 */
+				abilis,function = "mis7";
+			};
+			pctl_gpio_g: pctl-gpio-g {     /* GPIO bank G */
+				abilis,function = "gpiog";
+			};
+			pctl_tsin_p7: pctl-tsin-p7 {   /* Parallel TS-in 7 */
+				abilis,function = "mip7";
+			};
+			/* Port 5 */
+			pctl_gpio_j: pctl-gpio-j {     /* GPIO bank J */
+				abilis,function = "gpioj";
+			};
+			pctl_gpio_k: pctl-gpio-k {     /* GPIO bank K */
+				abilis,function = "gpiok";
+			};
+			pctl_ciplus: pctl-ciplus {     /* CI+ interface */
+				abilis,function = "ciplus";
+			};
+			pctl_mcard: pctl-mcard {       /* M-Card interface */
+				abilis,function = "mcard";
+			};
+			/* Port 6 */
+			pctl_tsout_p: pctl-tsout-p {   /* Parallel TS-out */
+				abilis,function = "mop";
+			};
+			pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
+				abilis,function = "mos0";
+			};
+			pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
+				abilis,function = "mos1";
+			};
+			pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
+				abilis,function = "mos2";
+			};
+			pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
+				abilis,function = "mos3";
+			};
+			/* Port 7 */
+			pctl_uart0: pctl-uart0 {       /* UART 0 */
+				abilis,function = "uart0";
+			};
+			pctl_uart1: pctl-uart1 {       /* UART 1 */
+				abilis,function = "uart1";
+			};
+			pctl_gpio_l: pctl-gpio-l {     /* GPIO bank L */
+				abilis,function = "gpiol";
+			};
+			pctl_gpio_m: pctl-gpio-m {     /* GPIO bank M */
+				abilis,function = "gpiom";
+			};
+			/* Port 8 */
+			pctl_spi3: pctl-spi3 {
+				abilis,function = "spi3";
+			};
+			/* Port 9 */
+			pctl_spi1: pctl-spi1 {
+				abilis,function = "spi1";
+			};
+			pctl_gpio_n: pctl-gpio-n {
+				abilis,function = "gpion";
+			};
+			/* Unmuxed GPIOs */
+			pctl_gpio_b: pctl-gpio-b {
+				abilis,function = "gpiob";
+			};
+			pctl_gpio_d: pctl-gpio-d {
+				abilis,function = "gpiod";
+			};
+			pctl_gpio_f: pctl-gpio-f {
+				abilis,function = "gpiof";
+			};
+			pctl_gpio_h: pctl-gpio-h {
+				abilis,function = "gpioh";
+			};
+			pctl_gpio_i: pctl-gpio-i {
+				abilis,function = "gpioi";
+			};
+		};
+
+		gpioa: gpio@FF140000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF140000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioa";
+		};
+		gpiob: gpio@FF141000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF141000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiob";
+		};
+		gpioc: gpio@FF142000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF142000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioc";
+		};
+		gpiod: gpio@FF143000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF143000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiod";
+		};
+		gpioe: gpio@FF144000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF144000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioe";
+		};
+		gpiof: gpio@FF145000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF145000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiof";
+		};
+		gpiog: gpio@FF146000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF146000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiog";
+		};
+		gpioh: gpio@FF147000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF147000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioh";
+		};
+		gpioi: gpio@FF148000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF148000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <12>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioi";
+		};
+		gpioj: gpio@FF149000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF149000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <32>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioj";
+		};
+		gpiok: gpio@FF14a000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF14A000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <22>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiok";
+		};
+		gpiol: gpio@FF14b000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF14B000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiol";
+		};
+		gpiom: gpio@FF14c000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF14C000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiom";
+		};
+		gpion: gpio@FF14d000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF14D000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <5>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpion";
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts
new file mode 100644
index 00000000000..3dd6ed94146
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts
@@ -0,0 +1,127 @@
+/*
+ * Abilis Systems TB100 Development Kit PCB device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/dts-v1/;
+
+/include/ "abilis_tb100.dtsi"
+
+/ {
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
+	};
+
+	aliases { };
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x08000000>;	/* 128M */
+	};
+
+	soc100 {
+		uart@FF100000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pctl_uart0>;
+		};
+		ethernet@FE100000 {
+			phy-mode = "rgmii";
+		};
+
+		i2c0: i2c@FF120000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c1: i2c@FF121000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c2: i2c@FF122000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c3: i2c@FF123000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c4: i2c@FF124000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			power {
+				label = "Power";
+				gpios = <&gpioi 0 0>;
+				linux,default-trigger = "default-on";
+			};
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpioi 1 0>;
+				linux,default-trigger = "heartbeat";
+			};
+			led2 {
+				label = "LED2";
+				gpios = <&gpioi 2 0>;
+				default-state = "off";
+			};
+			led3 {
+				label = "LED3";
+				gpios = <&gpioi 3 0>;
+				default-state = "off";
+			};
+			led4 {
+				label = "LED4";
+				gpios = <&gpioi 4 0>;
+				default-state = "off";
+			};
+			led5 {
+				label = "LED5";
+				gpios = <&gpioi 5 0>;
+				default-state = "off";
+			};
+			led6 {
+				label = "LED6";
+				gpios = <&gpioi 6 0>;
+				default-state = "off";
+			};
+			led7 {
+				label = "LED7";
+				gpios = <&gpioi 7 0>;
+				default-state = "off";
+			};
+			led8 {
+				label = "LED8";
+				gpios = <&gpioi 8 0>;
+				default-state = "off";
+			};
+			led9 {
+				label = "LED9";
+				gpios = <&gpioi 9 0>;
+				default-state = "off";
+			};
+			led10 {
+				label = "LED10";
+				gpios = <&gpioi 10 0>;
+				default-state = "off";
+			};
+			led11 {
+				label = "LED11";
+				gpios = <&gpioi 11 0>;
+				default-state = "off";
+			};
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/abilis_tb101.dtsi b/arch/arc/boot/dts/abilis_tb101.dtsi
new file mode 100644
index 00000000000..b0467229a5c
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb101.dtsi
@@ -0,0 +1,359 @@
+/*
+ * Abilis Systems TB101 SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/include/ "abilis_tb10x.dtsi"
+
+
+/ {
+	clock-frequency		= <500000000>;	/* 500 MHZ */
+
+	soc100 {
+		bus-frequency	= <166666666>;
+
+		pll0: oscillator {
+			clock-frequency  = <1000000000>;
+		};
+		cpu_clk: clkdiv_cpu {
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+		ahb_clk: clkdiv_ahb {
+			clock-mult = <1>;
+			clock-div = <6>;
+		};
+
+		iomux: iomux@FF10601c {
+			/* Port 1 */
+			pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
+				abilis,function = "mis0";
+			};
+			pctl_tsin_s1: pctl-tsin-s1 {   /* Serial TS-in 1 */
+				abilis,function = "mis1";
+			};
+			pctl_gpio_a: pctl-gpio-a {     /* GPIO bank A */
+				abilis,function = "gpioa";
+			};
+			pctl_tsin_p1: pctl-tsin-p1 {   /* Parallel TS-in 1 */
+				abilis,function = "mip1";
+			};
+			/* Port 2 */
+			pctl_tsin_s2: pctl-tsin-s2 {   /* Serial TS-in 2 */
+				abilis,function = "mis2";
+			};
+			pctl_tsin_s3: pctl-tsin-s3 {   /* Serial TS-in 3 */
+				abilis,function = "mis3";
+			};
+			pctl_gpio_c: pctl-gpio-c {     /* GPIO bank C */
+				abilis,function = "gpioc";
+			};
+			pctl_tsin_p3: pctl-tsin-p3 {   /* Parallel TS-in 3 */
+				abilis,function = "mip3";
+			};
+			/* Port 3 */
+			pctl_tsin_s4: pctl-tsin-s4 {   /* Serial TS-in 4 */
+				abilis,function = "mis4";
+			};
+			pctl_tsin_s5: pctl-tsin-s5 {   /* Serial TS-in 5 */
+				abilis,function = "mis5";
+			};
+			pctl_gpio_e: pctl-gpio-e {     /* GPIO bank E */
+				abilis,function = "gpioe";
+			};
+			pctl_tsin_p5: pctl-tsin-p5 {   /* Parallel TS-in 5 */
+				abilis,function = "mip5";
+			};
+			/* Port 4 */
+			pctl_tsin_s6: pctl-tsin-s6 {   /* Serial TS-in 6 */
+				abilis,function = "mis6";
+			};
+			pctl_tsin_s7: pctl-tsin-s7 {   /* Serial TS-in 7 */
+				abilis,function = "mis7";
+			};
+			pctl_gpio_g: pctl-gpio-g {     /* GPIO bank G */
+				abilis,function = "gpiog";
+			};
+			pctl_tsin_p7: pctl-tsin-p7 {   /* Parallel TS-in 7 */
+				abilis,function = "mip7";
+			};
+			/* Port 5 */
+			pctl_gpio_j: pctl-gpio-j {     /* GPIO bank J */
+				abilis,function = "gpioj";
+			};
+			pctl_gpio_k: pctl-gpio-k {     /* GPIO bank K */
+				abilis,function = "gpiok";
+			};
+			pctl_ciplus: pctl-ciplus {     /* CI+ interface */
+				abilis,function = "ciplus";
+			};
+			pctl_mcard: pctl-mcard {       /* M-Card interface */
+				abilis,function = "mcard";
+			};
+			pctl_stc0: pctl-stc0 {         /* Smart card I/F 0 */
+				abilis,function = "stc0";
+			};
+			pctl_stc1: pctl-stc1 {         /* Smart card I/F 1 */
+				abilis,function = "stc1";
+			};
+			/* Port 6 */
+			pctl_tsout_p: pctl-tsout-p {   /* Parallel TS-out */
+				abilis,function = "mop";
+			};
+			pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
+				abilis,function = "mos0";
+			};
+			pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
+				abilis,function = "mos1";
+			};
+			pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
+				abilis,function = "mos2";
+			};
+			pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
+				abilis,function = "mos3";
+			};
+			/* Port 7 */
+			pctl_uart0: pctl-uart0 {       /* UART 0 */
+				abilis,function = "uart0";
+			};
+			pctl_uart1: pctl-uart1 {       /* UART 1 */
+				abilis,function = "uart1";
+			};
+			pctl_gpio_l: pctl-gpio-l {     /* GPIO bank L */
+				abilis,function = "gpiol";
+			};
+			pctl_gpio_m: pctl-gpio-m {     /* GPIO bank M */
+				abilis,function = "gpiom";
+			};
+			/* Port 8 */
+			pctl_spi3: pctl-spi3 {
+				abilis,function = "spi3";
+			};
+			pctl_jtag: pctl-jtag {
+				abilis,function = "jtag";
+			};
+			/* Port 9 */
+			pctl_spi1: pctl-spi1 {
+				abilis,function = "spi1";
+			};
+			pctl_gpio_n: pctl-gpio-n {
+				abilis,function = "gpion";
+			};
+			/* Unmuxed GPIOs */
+			pctl_gpio_b: pctl-gpio-b {
+				abilis,function = "gpiob";
+			};
+			pctl_gpio_d: pctl-gpio-d {
+				abilis,function = "gpiod";
+			};
+			pctl_gpio_f: pctl-gpio-f {
+				abilis,function = "gpiof";
+			};
+			pctl_gpio_h: pctl-gpio-h {
+				abilis,function = "gpioh";
+			};
+			pctl_gpio_i: pctl-gpio-i {
+				abilis,function = "gpioi";
+			};
+		};
+
+		gpioa: gpio@FF140000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF140000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioa";
+		};
+		gpiob: gpio@FF141000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF141000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiob";
+		};
+		gpioc: gpio@FF142000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF142000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioc";
+		};
+		gpiod: gpio@FF143000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF143000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiod";
+		};
+		gpioe: gpio@FF144000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF144000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioe";
+		};
+		gpiof: gpio@FF145000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF145000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiof";
+		};
+		gpiog: gpio@FF146000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF146000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiog";
+		};
+		gpioh: gpio@FF147000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF147000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioh";
+		};
+		gpioi: gpio@FF148000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF148000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <12>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioi";
+		};
+		gpioj: gpio@FF149000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF149000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <32>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioj";
+		};
+		gpiok: gpio@FF14a000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF14A000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <22>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiok";
+		};
+		gpiol: gpio@FF14b000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF14B000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiol";
+		};
+		gpiom: gpio@FF14c000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF14C000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiom";
+		};
+		gpion: gpio@FF14d000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xFF14D000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <5>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpion";
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts
new file mode 100644
index 00000000000..1cf51c280f2
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts
@@ -0,0 +1,127 @@
+/*
+ * Abilis Systems TB101 Development Kit PCB device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/dts-v1/;
+
+/include/ "abilis_tb101.dtsi"
+
+/ {
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
+	};
+
+	aliases { };
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x08000000>;	/* 128M */
+	};
+
+	soc100 {
+		uart@FF100000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pctl_uart0>;
+		};
+		ethernet@FE100000 {
+			phy-mode = "rgmii";
+		};
+
+		i2c0: i2c@FF120000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c1: i2c@FF121000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c2: i2c@FF122000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c3: i2c@FF123000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c4: i2c@FF124000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			power {
+				label = "Power";
+				gpios = <&gpioi 0 0>;
+				linux,default-trigger = "default-on";
+			};
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpioi 1 0>;
+				linux,default-trigger = "heartbeat";
+			};
+			led2 {
+				label = "LED2";
+				gpios = <&gpioi 2 0>;
+				default-state = "off";
+			};
+			led3 {
+				label = "LED3";
+				gpios = <&gpioi 3 0>;
+				default-state = "off";
+			};
+			led4 {
+				label = "LED4";
+				gpios = <&gpioi 4 0>;
+				default-state = "off";
+			};
+			led5 {
+				label = "LED5";
+				gpios = <&gpioi 5 0>;
+				default-state = "off";
+			};
+			led6 {
+				label = "LED6";
+				gpios = <&gpioi 6 0>;
+				default-state = "off";
+			};
+			led7 {
+				label = "LED7";
+				gpios = <&gpioi 7 0>;
+				default-state = "off";
+			};
+			led8 {
+				label = "LED8";
+				gpios = <&gpioi 8 0>;
+				default-state = "off";
+			};
+			led9 {
+				label = "LED9";
+				gpios = <&gpioi 9 0>;
+				default-state = "off";
+			};
+			led10 {
+				label = "LED10";
+				gpios = <&gpioi 10 0>;
+				default-state = "off";
+			};
+			led11 {
+				label = "LED11";
+				gpios = <&gpioi 11 0>;
+				default-state = "off";
+			};
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi
new file mode 100644
index 00000000000..a098d7c05e9
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
@@ -0,0 +1,240 @@
+/*
+ * Abilis Systems TB10X SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+
+/ {
+	compatible		= "abilis,arc-tb10x";
+	#address-cells		= <1>;
+	#size-cells		= <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "snps,arc770d";
+			reg = <0>;
+		};
+	};
+
+	soc100 {
+		#address-cells	= <1>;
+		#size-cells	= <1>;
+		device_type	= "soc";
+		ranges		= <0xfe000000 0xfe000000 0x02000000
+				0x000F0000 0x000F0000 0x00010000>;
+		compatible	= "abilis,tb10x", "simple-bus";
+
+		pll0: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "pll0";
+		};
+		cpu_clk: clkdiv_cpu {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&pll0>;
+			clock-output-names = "cpu_clk";
+		};
+		ahb_clk: clkdiv_ahb {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&pll0>;
+			clock-output-names = "ahb_clk";
+		};
+
+		iomux: iomux@FF10601c {
+			compatible = "abilis,tb10x-iomux";
+			#gpio-range-cells = <3>;
+			reg = <0xFF10601c 0x4>;
+		};
+
+		intc: interrupt-controller {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+		tb10x_ictl: pic@fe002000 {
+			compatible = "abilis,tb10x-ictl";
+			reg = <0xFE002000 0x20>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
+					20 21 22 23 24 25 26 27 28 29 30 31>;
+		};
+
+		uart@FF100000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xFF100000 0x100>;
+			clock-frequency = <166666666>;
+			interrupts = <25 8>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupt-parent = <&tb10x_ictl>;
+		};
+		ethernet@FE100000 {
+			compatible = "snps,dwmac-3.70a","snps,dwmac";
+			reg = <0xFE100000 0x1058>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <6 8>;
+			interrupt-names = "macirq";
+			clocks = <&ahb_clk>;
+			clock-names = "stmmaceth";
+		};
+		dma@FE000000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xFE000000 0x400>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <14 8>;
+			dma-channels = <6>;
+			dma-requests = <0>;
+			dma-masters = <1>;
+			#dma-cells = <3>;
+			chan_allocation_order = <0>;
+			chan_priority = <1>;
+			block_size = <0x7ff>;
+			data_width = <2 0 0 0>;
+			clocks = <&ahb_clk>;
+			clock-names = "hclk";
+		};
+
+		i2c0: i2c@FF120000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xFF120000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+		i2c1: i2c@FF121000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xFF121000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+		i2c2: i2c@FF122000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xFF122000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+		i2c3: i2c@FF123000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xFF123000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+		i2c4: i2c@FF124000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xFF124000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+
+		spi0: spi@0xFE010000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "abilis,tb100-spi";
+			num-cs = <1>;
+			reg = <0xFE010000 0x20>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <26 8>;
+			clocks = <&ahb_clk>;
+		};
+		spi1: spi@0xFE011000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "abilis,tb100-spi";
+			num-cs = <2>;
+			reg = <0xFE011000 0x20>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <10 8>;
+			clocks = <&ahb_clk>;
+		};
+
+		tb10x_tsm: tb10x-tsm@ff316000 {
+			compatible = "abilis,tb100-tsm";
+			reg = <0xff316000 0x400>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <17 8>;
+			output-clkdiv = <4>;
+			global-packet-delay = <0x21>;
+			port-packet-delay = <0>;
+		};
+		tb10x_stream_proc: tb10x-stream-proc {
+			compatible = "abilis,tb100-streamproc";
+			reg =   <0xfff00000 0x200>,
+				<0x000f0000 0x10000>,
+				<0xfff00200 0x105>,
+				<0xff10600c 0x1>,
+				<0xfe001018 0x1>;
+			reg-names =     "mbox",
+					"sp_iccm",
+					"mbox_irq",
+					"cpuctrl",
+					"a6it_int_force";
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <20 2>, <19 2>;
+			interrupt-names = "cmd_irq", "event_irq";
+		};
+		tb10x_mdsc0: tb10x-mdscr@FF300000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xFF300000 0x7000>;
+			tb100-mdscr-manage-tsin;
+		};
+		tb10x_mscr0: tb10x-mdscr@FF307000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xFF307000 0x7000>;
+		};
+		tb10x_scr0: tb10x-mdscr@ff30e000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xFF30e000 0x4000>;
+			tb100-mdscr-manage-tsin;
+		};
+		tb10x_scr1: tb10x-mdscr@ff312000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xFF312000 0x4000>;
+			tb100-mdscr-manage-tsin;
+		};
+		tb10x_wfb: tb10x-wfb@ff319000 {
+			compatible = "abilis,tb100-wfb";
+			reg = <0xff319000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <16 8>;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/angel4.dts b/arch/arc/boot/dts/angel4.dts
new file mode 100644
index 00000000000..5bb2fdaca02
--- /dev/null
+++ b/arch/arc/boot/dts/angel4.dts
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "snps,arc-angel4";
+	clock-frequency = <80000000>;	/* 80 MHZ */
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	chosen {
+		bootargs = "console=ttyARC0,115200n8 earlyprintk=ttyARC0";
+	};
+
+	aliases {
+		serial0 = &arcuart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	/* 256M */
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		intc: interrupt-controller {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		arcuart0: serial@c0fc1000 {
+			compatible = "snps,arc-uart";
+			reg = <0xc0fc1000 0x100>;
+			interrupts = <5>;
+			clock-frequency = <80000000>;
+			current-speed = <115200>;
+			status = "okay";
+		};
+
+		ethernet@c0fc2000 {
+			compatible = "snps,arc-emac";
+			reg = <0xc0fc2000 0x3c>;
+			interrupts = <6>;
+			mac-address = [ 00 11 22 33 44 55 ];
+			clock-frequency = <80000000>;
+			max-speed = <100>;
+			phy = <&phy0>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy0: ethernet-phy@0 {
+				reg = <1>;
+			};
+		};
+
+		arcpmu0: pmu {
+			compatible = "snps,arc700-pmu";
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts
new file mode 100644
index 00000000000..4f31b2eb5cd
--- /dev/null
+++ b/arch/arc/boot/dts/nsimosci.dts
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "snps,nsimosci";
+	clock-frequency = <20000000>;	/* 20 MHZ */
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	chosen {
+		/* this is for console on PGU */
+		/* bootargs = "console=tty0 consoleblank=0"; */
+		/* this is for console on serial */
+		bootargs = "earlycon=uart8250,mmio32,0xc0000000,115200n8 console=ttyS0,115200n8 consoleblank=0 debug";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256M */
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		intc: interrupt-controller {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@c0000000 {
+			compatible = "ns8250";
+			reg = <0xc0000000 0x2000>;
+			interrupts = <11>;
+			clock-frequency = <3686400>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		pgu0: pgu@c9000000 {
+			compatible = "snps,arcpgufb";
+			reg = <0xc9000000 0x400>;
+		};
+
+		ps2: ps2@c9001000 {
+			compatible = "snps,arc_ps2";
+			reg = <0xc9000400 0x14>;
+			interrupts = <13>;
+			interrupt-names = "arc_ps2_irq";
+		};
+
+		eth0: ethernet@c0003000 {
+			compatible = "snps,oscilan";
+			reg = <0xc0003000 0x44>;
+			interrupts = <7>, <8>;
+			interrupt-names = "rx", "tx";
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/skeleton.dtsi b/arch/arc/boot/dts/skeleton.dtsi
new file mode 100644
index 00000000000..a870bdd5e40
--- /dev/null
+++ b/arch/arc/boot/dts/skeleton.dtsi
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Skeleton device tree; the bare minimum needed to boot; just include and
+ * add a compatible value.
+ */
+
+/ {
+	compatible = "snps,arc";
+	clock-frequency = <80000000>;	/* 80 MHZ */
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "snps,arc770d";
+			reg = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	/* 256M */
+	};
+};
diff --git a/arch/arc/configs/fpga_defconfig b/arch/arc/configs/fpga_defconfig
new file mode 100644
index 00000000000..e283aa58693
--- /dev/null
+++ b/arch/arc/configs/fpga_defconfig
@@ -0,0 +1,68 @@
+CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_DEFAULT_HOSTNAME="ARCLinux"
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARC_PLAT_FPGA_LEGACY=y
+CONFIG_ARC_BOARD_ML509=y
+# CONFIG_ARC_HAS_RTSC is not set
+CONFIG_ARC_BUILTIN_DTB_NAME="angel4"
+CONFIG_PREEMPT=y
+# CONFIG_COMPACTION is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+CONFIG_ARC_EMAC=y
+CONFIG_LXT_PHY=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_ARC=y
+CONFIG_SERIAL_ARC_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_XZ_DEC=y
diff --git a/arch/arc/configs/fpga_noramfs_defconfig b/arch/arc/configs/fpga_noramfs_defconfig
new file mode 100644
index 00000000000..5276a52f6a2
--- /dev/null
+++ b/arch/arc/configs/fpga_noramfs_defconfig
@@ -0,0 +1,64 @@
+CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_DEFAULT_HOSTNAME="ARCLinux"
+# CONFIG_SWAP is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARC_PLAT_FPGA_LEGACY=y
+CONFIG_ARC_BOARD_ML509=y
+# CONFIG_ARC_HAS_RTSC is not set
+CONFIG_ARC_BUILTIN_DTB_NAME="angel4"
+CONFIG_PREEMPT=y
+# CONFIG_COMPACTION is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+CONFIG_ARC_EMAC=y
+CONFIG_LXT_PHY=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_ARC=y
+CONFIG_SERIAL_ARC_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_XZ_DEC=y
diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig
new file mode 100644
index 00000000000..c01ba35a4ef
--- /dev/null
+++ b/arch/arc/configs/nsimosci_defconfig
@@ -0,0 +1,76 @@
+CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_DEFAULT_HOSTNAME="ARCLinux"
+# CONFIG_SWAP is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="../arc_initramfs"
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARC_PLAT_FPGA_LEGACY=y
+CONFIG_ARC_BOARD_ML509=y
+# CONFIG_ARC_IDE is not set
+# CONFIG_ARCTANGENT_EMAC is not set
+# CONFIG_ARC_HAS_RTSC is not set
+CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci"
+# CONFIG_COMPACTION is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_ARC_PS2=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_ARC=y
+CONFIG_SERIAL_ARC_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_XZ_DEC=y
diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig
new file mode 100644
index 00000000000..6be6492442d
--- /dev/null
+++ b/arch/arc/configs/tb10x_defconfig
@@ -0,0 +1,117 @@
+CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_DEFAULT_HOSTNAME="tb10x"
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="../tb10x-rootfs.cpio"
+CONFIG_INITRAMFS_ROOT_UID=2100
+CONFIG_INITRAMFS_ROOT_GID=501
+# CONFIG_RD_GZIP is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLOCK is not set
+CONFIG_ARC_PLAT_TB10X=y
+CONFIG_ARC_CACHE_LINE_SHIFT=5
+# CONFIG_ARC_HAS_RTSC is not set
+CONFIG_ARC_STACK_NONEXEC=y
+CONFIG_HZ=250
+CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk"
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_COMPACTION is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_DEBUG_FS=y
+CONFIG_STMMAC_DA=y
+CONFIG_STMMAC_CHAINED=y
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_DW=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_DMADEVICES=y
+CONFIG_DW_DMAC=y
+CONFIG_NET_DMA=y
+CONFIG_ASYNC_TX_DMA=y
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_HEADERS_CHECK=y
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild
new file mode 100644
index 00000000000..e76fd79f32b
--- /dev/null
+++ b/arch/arc/include/asm/Kbuild
@@ -0,0 +1,52 @@
+generic-y += auxvec.h
+generic-y += barrier.h
+generic-y += bitsperlong.h
+generic-y += bugs.h
+generic-y += clkdev.h
+generic-y += cputime.h
+generic-y += device.h
+generic-y += div64.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += fb.h
+generic-y += fcntl.h
+generic-y += ftrace.h
+generic-y += hardirq.h
+generic-y += hash.h
+generic-y += hw_irq.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += kmap_types.h
+generic-y += kvm_para.h
+generic-y += local.h
+generic-y += local64.h
+generic-y += mcs_spinlock.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += parport.h
+generic-y += pci.h
+generic-y += percpu.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += preempt.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sembuf.h
+generic-y += shmbuf.h
+generic-y += siginfo.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += topology.h
+generic-y += trace_clock.h
+generic-y += types.h
+generic-y += ucontext.h
+generic-y += user.h
+generic-y += vga.h
+generic-y += xor.h
diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
new file mode 100644
index 00000000000..355cb470c2a
--- /dev/null
+++ b/arch/arc/include/asm/arcregs.h
@@ -0,0 +1,326 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_ARCREGS_H
+#define _ASM_ARC_ARCREGS_H
+
+#ifdef __KERNEL__
+
+/* Build Configuration Registers */
+#define ARC_REG_DCCMBASE_BCR	0x61	/* DCCM Base Addr */
+#define ARC_REG_CRC_BCR		0x62
+#define ARC_REG_DVFB_BCR	0x64
+#define ARC_REG_EXTARITH_BCR	0x65
+#define ARC_REG_VECBASE_BCR	0x68
+#define ARC_REG_PERIBASE_BCR	0x69
+#define ARC_REG_FP_BCR		0x6B	/* Single-Precision FPU */
+#define ARC_REG_DPFP_BCR	0x6C	/* Dbl Precision FPU */
+#define ARC_REG_DCCM_BCR	0x74	/* DCCM Present + SZ */
+#define ARC_REG_TIMERS_BCR	0x75
+#define ARC_REG_ICCM_BCR	0x78
+#define ARC_REG_XY_MEM_BCR	0x79
+#define ARC_REG_MAC_BCR		0x7a
+#define ARC_REG_MUL_BCR		0x7b
+#define ARC_REG_SWAP_BCR	0x7c
+#define ARC_REG_NORM_BCR	0x7d
+#define ARC_REG_MIXMAX_BCR	0x7e
+#define ARC_REG_BARREL_BCR	0x7f
+#define ARC_REG_D_UNCACH_BCR	0x6A
+
+/* status32 Bits Positions */
+#define STATUS_AE_BIT		5	/* Exception active */
+#define STATUS_DE_BIT		6	/* PC is in delay slot */
+#define STATUS_U_BIT		7	/* User/Kernel mode */
+#define STATUS_L_BIT		12	/* Loop inhibit */
+
+/* These masks correspond to the status word(STATUS_32) bits */
+#define STATUS_AE_MASK		(1<<STATUS_AE_BIT)
+#define STATUS_DE_MASK		(1<<STATUS_DE_BIT)
+#define STATUS_U_MASK		(1<<STATUS_U_BIT)
+#define STATUS_L_MASK		(1<<STATUS_L_BIT)
+
+/*
+ * ECR: Exception Cause Reg bits-n-pieces
+ * [23:16] = Exception Vector
+ * [15: 8] = Exception Cause Code
+ * [ 7: 0] = Exception Parameters (for certain types only)
+ */
+#define ECR_VEC_MASK			0xff0000
+#define ECR_CODE_MASK			0x00ff00
+#define ECR_PARAM_MASK			0x0000ff
+
+/* Exception Cause Vector Values */
+#define ECR_V_INSN_ERR			0x02
+#define ECR_V_MACH_CHK			0x20
+#define ECR_V_ITLB_MISS			0x21
+#define ECR_V_DTLB_MISS			0x22
+#define ECR_V_PROTV			0x23
+#define ECR_V_TRAP			0x25
+
+/* Protection Violation Exception Cause Code Values */
+#define ECR_C_PROTV_INST_FETCH		0x00
+#define ECR_C_PROTV_LOAD		0x01
+#define ECR_C_PROTV_STORE		0x02
+#define ECR_C_PROTV_XCHG		0x03
+#define ECR_C_PROTV_MISALIG_DATA	0x04
+
+#define ECR_C_BIT_PROTV_MISALIG_DATA	10
+
+/* Machine Check Cause Code Values */
+#define ECR_C_MCHK_DUP_TLB		0x01
+
+/* DTLB Miss Exception Cause Code Values */
+#define ECR_C_BIT_DTLB_LD_MISS		8
+#define ECR_C_BIT_DTLB_ST_MISS		9
+
+/* Dummy ECR values for Interrupts */
+#define event_IRQ1		0x0031abcd
+#define event_IRQ2		0x0032abcd
+
+/* Auxiliary registers */
+#define AUX_IDENTITY		4
+#define AUX_INTR_VEC_BASE	0x25
+
+
+/*
+ * Floating Pt Registers
+ * Status regs are read-only (build-time) so need not be saved/restored
+ */
+#define ARC_AUX_FP_STAT         0x300
+#define ARC_AUX_DPFP_1L         0x301
+#define ARC_AUX_DPFP_1H         0x302
+#define ARC_AUX_DPFP_2L         0x303
+#define ARC_AUX_DPFP_2H         0x304
+#define ARC_AUX_DPFP_STAT       0x305
+
+#ifndef __ASSEMBLY__
+
+/*
+ ******************************************************************
+ *      Inline ASM macros to read/write AUX Regs
+ *      Essentially invocation of lr/sr insns from "C"
+ */
+
+#if 1
+
+#define read_aux_reg(reg)	__builtin_arc_lr(reg)
+
+/* gcc builtin sr needs reg param to be long immediate */
+#define write_aux_reg(reg_immed, val)		\
+		__builtin_arc_sr((unsigned int)val, reg_immed)
+
+#else
+
+#define read_aux_reg(reg)		\
+({					\
+	unsigned int __ret;		\
+	__asm__ __volatile__(		\
+	"	lr    %0, [%1]"		\
+	: "=r"(__ret)			\
+	: "i"(reg));			\
+	__ret;				\
+})
+
+/*
+ * Aux Reg address is specified as long immediate by caller
+ * e.g.
+ *    write_aux_reg(0x69, some_val);
+ * This generates tightest code.
+ */
+#define write_aux_reg(reg_imm, val)	\
+({					\
+	__asm__ __volatile__(		\
+	"	sr   %0, [%1]	\n"	\
+	:				\
+	: "ir"(val), "i"(reg_imm));	\
+})
+
+/*
+ * Aux Reg address is specified in a variable
+ *  * e.g.
+ *      reg_num = 0x69
+ *      write_aux_reg2(reg_num, some_val);
+ * This has to generate glue code to load the reg num from
+ *  memory to a reg hence not recommended.
+ */
+#define write_aux_reg2(reg_in_var, val)		\
+({						\
+	unsigned int tmp;			\
+						\
+	__asm__ __volatile__(			\
+	"	ld   %0, [%2]	\n\t"		\
+	"	sr   %1, [%0]	\n\t"		\
+	: "=&r"(tmp)				\
+	: "r"(val), "memory"(&reg_in_var));	\
+})
+
+#endif
+
+#define READ_BCR(reg, into)				\
+{							\
+	unsigned int tmp;				\
+	tmp = read_aux_reg(reg);			\
+	if (sizeof(tmp) == sizeof(into)) {		\
+		into = *((typeof(into) *)&tmp);		\
+	} else {					\
+		extern void bogus_undefined(void);	\
+		bogus_undefined();			\
+	}						\
+}
+
+#define WRITE_BCR(reg, into)				\
+{							\
+	unsigned int tmp;				\
+	if (sizeof(tmp) == sizeof(into)) {		\
+		tmp = (*(unsigned int *)(into));	\
+		write_aux_reg(reg, tmp);		\
+	} else  {					\
+		extern void bogus_undefined(void);	\
+		bogus_undefined();			\
+	}						\
+}
+
+/* Helpers */
+#define TO_KB(bytes)		((bytes) >> 10)
+#define TO_MB(bytes)		(TO_KB(bytes) >> 10)
+#define PAGES_TO_KB(n_pages)	((n_pages) << (PAGE_SHIFT - 10))
+#define PAGES_TO_MB(n_pages)	(PAGES_TO_KB(n_pages) >> 10)
+
+#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
+/* These DPFP regs need to be saved/restored across ctx-sw */
+struct arc_fpu {
+	struct {
+		unsigned int l, h;
+	} aux_dpfp[2];
+};
+#endif
+
+/*
+ ***************************************************************
+ * Build Configuration Registers, with encoded hardware config
+ */
+struct bcr_identity {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int chip_id:16, cpu_id:8, family:8;
+#else
+	unsigned int family:8, cpu_id:8, chip_id:16;
+#endif
+};
+
+#define EXTN_SWAP_VALID     0x1
+#define EXTN_NORM_VALID     0x2
+#define EXTN_MINMAX_VALID   0x2
+#define EXTN_BARREL_VALID   0x2
+
+struct bcr_extn {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:20, crc:1, ext_arith:2, mul:2, barrel:2, minmax:2,
+		     norm:2, swap:1;
+#else
+	unsigned int swap:1, norm:2, minmax:2, barrel:2, mul:2, ext_arith:2,
+		     crc:1, pad:20;
+#endif
+};
+
+/* DSP Options Ref Manual */
+struct bcr_extn_mac_mul {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:16, type:8, ver:8;
+#else
+	unsigned int ver:8, type:8, pad:16;
+#endif
+};
+
+struct bcr_extn_xymem {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int ram_org:2, num_banks:4, bank_sz:4, ver:8;
+#else
+	unsigned int ver:8, bank_sz:4, num_banks:4, ram_org:2;
+#endif
+};
+
+struct bcr_perip {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int start:8, pad2:8, sz:8, pad:8;
+#else
+	unsigned int pad:8, sz:8, pad2:8, start:8;
+#endif
+};
+struct bcr_iccm {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int base:16, pad:5, sz:3, ver:8;
+#else
+	unsigned int ver:8, sz:3, pad:5, base:16;
+#endif
+};
+
+/* DCCM Base Address Register: ARC_REG_DCCMBASE_BCR */
+struct bcr_dccm_base {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int addr:24, ver:8;
+#else
+	unsigned int ver:8, addr:24;
+#endif
+};
+
+/* DCCM RAM Configuration Register: ARC_REG_DCCM_BCR */
+struct bcr_dccm {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int res:21, sz:3, ver:8;
+#else
+	unsigned int ver:8, sz:3, res:21;
+#endif
+};
+
+/* Both SP and DP FPU BCRs have same format */
+struct bcr_fp {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int fast:1, ver:8;
+#else
+	unsigned int ver:8, fast:1;
+#endif
+};
+
+/*
+ *******************************************************************
+ * Generic structures to hold build configuration used at runtime
+ */
+
+struct cpuinfo_arc_mmu {
+	unsigned int ver, pg_sz, sets, ways, u_dtlb, u_itlb, num_tlb;
+};
+
+struct cpuinfo_arc_cache {
+	unsigned int sz, line_len, assoc, ver;
+};
+
+struct cpuinfo_arc_ccm {
+	unsigned int base_addr, sz;
+};
+
+struct cpuinfo_arc {
+	struct cpuinfo_arc_cache icache, dcache;
+	struct cpuinfo_arc_mmu mmu;
+	struct bcr_identity core;
+	unsigned int timers;
+	unsigned int vec_base;
+	unsigned int uncached_base;
+	struct cpuinfo_arc_ccm iccm, dccm;
+	struct bcr_extn extn;
+	struct bcr_extn_xymem extn_xymem;
+	struct bcr_extn_mac_mul extn_mac_mul;
+	struct bcr_fp fp, dpfp;
+};
+
+extern struct cpuinfo_arc cpuinfo_arc700[];
+
+#endif /* __ASEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_ARC_ARCREGS_H */
diff --git a/arch/arc/include/asm/asm-offsets.h b/arch/arc/include/asm/asm-offsets.h
new file mode 100644
index 00000000000..dad18768fe4
--- /dev/null
+++ b/arch/arc/include/asm/asm-offsets.h
@@ -0,0 +1,9 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <generated/asm-offsets.h>
diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h
new file mode 100644
index 00000000000..83f03ca6caf
--- /dev/null
+++ b/arch/arc/include/asm/atomic.h
@@ -0,0 +1,232 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_ATOMIC_H
+#define _ASM_ARC_ATOMIC_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <asm/cmpxchg.h>
+#include <asm/barrier.h>
+#include <asm/smp.h>
+
+#define atomic_read(v)  ((v)->counter)
+
+#ifdef CONFIG_ARC_HAS_LLSC
+
+#define atomic_set(v, i) (((v)->counter) = (i))
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+	unsigned int temp;
+
+	__asm__ __volatile__(
+	"1:	llock   %0, [%1]	\n"
+	"	add     %0, %0, %2	\n"
+	"	scond   %0, [%1]	\n"
+	"	bnz     1b		\n"
+	: "=&r"(temp)	/* Early clobber, to prevent reg reuse */
+	: "r"(&v->counter), "ir"(i)
+	: "cc");
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	unsigned int temp;
+
+	__asm__ __volatile__(
+	"1:	llock   %0, [%1]	\n"
+	"	sub     %0, %0, %2	\n"
+	"	scond   %0, [%1]	\n"
+	"	bnz     1b		\n"
+	: "=&r"(temp)
+	: "r"(&v->counter), "ir"(i)
+	: "cc");
+}
+
+/* add and also return the new value */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned int temp;
+
+	__asm__ __volatile__(
+	"1:	llock   %0, [%1]	\n"
+	"	add     %0, %0, %2	\n"
+	"	scond   %0, [%1]	\n"
+	"	bnz     1b		\n"
+	: "=&r"(temp)
+	: "r"(&v->counter), "ir"(i)
+	: "cc");
+
+	return temp;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned int temp;
+
+	__asm__ __volatile__(
+	"1:	llock   %0, [%1]	\n"
+	"	sub     %0, %0, %2	\n"
+	"	scond   %0, [%1]	\n"
+	"	bnz     1b		\n"
+	: "=&r"(temp)
+	: "r"(&v->counter), "ir"(i)
+	: "cc");
+
+	return temp;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+	unsigned int temp;
+
+	__asm__ __volatile__(
+	"1:	llock   %0, [%1]	\n"
+	"	bic     %0, %0, %2	\n"
+	"	scond   %0, [%1]	\n"
+	"	bnz     1b		\n"
+	: "=&r"(temp)
+	: "r"(addr), "ir"(mask)
+	: "cc");
+}
+
+#else	/* !CONFIG_ARC_HAS_LLSC */
+
+#ifndef CONFIG_SMP
+
+ /* violating atomic_xxx API locking protocol in UP for optimization sake */
+#define atomic_set(v, i) (((v)->counter) = (i))
+
+#else
+
+static inline void atomic_set(atomic_t *v, int i)
+{
+	/*
+	 * Independent of hardware support, all of the atomic_xxx() APIs need
+	 * to follow the same locking rules to make sure that a "hardware"
+	 * atomic insn (e.g. LD) doesn't clobber an "emulated" atomic insn
+	 * sequence
+	 *
+	 * Thus atomic_set() despite being 1 insn (and seemingly atomic)
+	 * requires the locking.
+	 */
+	unsigned long flags;
+
+	atomic_ops_lock(flags);
+	v->counter = i;
+	atomic_ops_unlock(flags);
+}
+#endif
+
+/*
+ * Non hardware assisted Atomic-R-M-W
+ * Locking would change to irq-disabling only (UP) and spinlocks (SMP)
+ */
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+	unsigned long flags;
+
+	atomic_ops_lock(flags);
+	v->counter += i;
+	atomic_ops_unlock(flags);
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	unsigned long flags;
+
+	atomic_ops_lock(flags);
+	v->counter -= i;
+	atomic_ops_unlock(flags);
+}
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long flags;
+	unsigned long temp;
+
+	atomic_ops_lock(flags);
+	temp = v->counter;
+	temp += i;
+	v->counter = temp;
+	atomic_ops_unlock(flags);
+
+	return temp;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long flags;
+	unsigned long temp;
+
+	atomic_ops_lock(flags);
+	temp = v->counter;
+	temp -= i;
+	v->counter = temp;
+	atomic_ops_unlock(flags);
+
+	return temp;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+	unsigned long flags;
+
+	atomic_ops_lock(flags);
+	*addr &= ~mask;
+	atomic_ops_unlock(flags);
+}
+
+#endif /* !CONFIG_ARC_HAS_LLSC */
+
+/**
+ * __atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns the old value of @v
+ */
+#define __atomic_add_unless(v, a, u)					\
+({									\
+	int c, old;							\
+	c = atomic_read(v);						\
+	while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c)\
+		c = old;						\
+	c;								\
+})
+
+#define atomic_inc_not_zero(v)		atomic_add_unless((v), 1, 0)
+
+#define atomic_inc(v)			atomic_add(1, v)
+#define atomic_dec(v)			atomic_sub(1, v)
+
+#define atomic_inc_and_test(v)		(atomic_add_return(1, v) == 0)
+#define atomic_dec_and_test(v)		(atomic_sub_return(1, v) == 0)
+#define atomic_inc_return(v)		atomic_add_return(1, (v))
+#define atomic_dec_return(v)		atomic_sub_return(1, (v))
+#define atomic_sub_and_test(i, v)	(atomic_sub_return(i, v) == 0)
+
+#define atomic_add_negative(i, v)	(atomic_add_return(i, v) < 0)
+
+#define ATOMIC_INIT(i)			{ (i) }
+
+#include <asm-generic/atomic64.h>
+
+#endif
+
+#endif
+
+#endif
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
new file mode 100644
index 00000000000..ebc0cf3164d
--- /dev/null
+++ b/arch/arc/include/asm/bitops.h
@@ -0,0 +1,513 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_BITOPS_H
+#define _ASM_BITOPS_H
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <asm/barrier.h>
+
+/*
+ * Hardware assisted read-modify-write using ARC700 LLOCK/SCOND insns.
+ * The Kconfig glue ensures that in SMP, this is only set if the container
+ * SoC/platform has cross-core coherent LLOCK/SCOND
+ */
+#if defined(CONFIG_ARC_HAS_LLSC)
+
+static inline void set_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned int temp;
+
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	__asm__ __volatile__(
+	"1:	llock   %0, [%1]	\n"
+	"	bset    %0, %0, %2	\n"
+	"	scond   %0, [%1]	\n"
+	"	bnz     1b	\n"
+	: "=&r"(temp)
+	: "r"(m), "ir"(nr)
+	: "cc");
+}
+
+static inline void clear_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned int temp;
+
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	__asm__ __volatile__(
+	"1:	llock   %0, [%1]	\n"
+	"	bclr    %0, %0, %2	\n"
+	"	scond   %0, [%1]	\n"
+	"	bnz     1b	\n"
+	: "=&r"(temp)
+	: "r"(m), "ir"(nr)
+	: "cc");
+}
+
+static inline void change_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned int temp;
+
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	__asm__ __volatile__(
+	"1:	llock   %0, [%1]	\n"
+	"	bxor    %0, %0, %2	\n"
+	"	scond   %0, [%1]	\n"
+	"	bnz     1b		\n"
+	: "=&r"(temp)
+	: "r"(m), "ir"(nr)
+	: "cc");
+}
+
+/*
+ * Semantically:
+ *    Test the bit
+ *    if clear
+ *        set it and return 0 (old value)
+ *    else
+ *        return 1 (old value).
+ *
+ * Since ARC lacks a equivalent h/w primitive, the bit is set unconditionally
+ * and the old value of bit is returned
+ */
+static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned long old, temp;
+
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	__asm__ __volatile__(
+	"1:	llock   %0, [%2]	\n"
+	"	bset    %1, %0, %3	\n"
+	"	scond   %1, [%2]	\n"
+	"	bnz     1b		\n"
+	: "=&r"(old), "=&r"(temp)
+	: "r"(m), "ir"(nr)
+	: "cc");
+
+	return (old & (1 << nr)) != 0;
+}
+
+static inline int
+test_and_clear_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned int old, temp;
+
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	__asm__ __volatile__(
+	"1:	llock   %0, [%2]	\n"
+	"	bclr    %1, %0, %3	\n"
+	"	scond   %1, [%2]	\n"
+	"	bnz     1b		\n"
+	: "=&r"(old), "=&r"(temp)
+	: "r"(m), "ir"(nr)
+	: "cc");
+
+	return (old & (1 << nr)) != 0;
+}
+
+static inline int
+test_and_change_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned int old, temp;
+
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	__asm__ __volatile__(
+	"1:	llock   %0, [%2]	\n"
+	"	bxor    %1, %0, %3	\n"
+	"	scond   %1, [%2]	\n"
+	"	bnz     1b		\n"
+	: "=&r"(old), "=&r"(temp)
+	: "r"(m), "ir"(nr)
+	: "cc");
+
+	return (old & (1 << nr)) != 0;
+}
+
+#else	/* !CONFIG_ARC_HAS_LLSC */
+
+#include <asm/smp.h>
+
+/*
+ * Non hardware assisted Atomic-R-M-W
+ * Locking would change to irq-disabling only (UP) and spinlocks (SMP)
+ *
+ * There's "significant" micro-optimization in writing our own variants of
+ * bitops (over generic variants)
+ *
+ * (1) The generic APIs have "signed" @nr while we have it "unsigned"
+ *     This avoids extra code to be generated for pointer arithmatic, since
+ *     is "not sure" that index is NOT -ve
+ * (2) Utilize the fact that ARCompact bit fidding insn (BSET/BCLR/ASL) etc
+ *     only consider bottom 5 bits of @nr, so NO need to mask them off.
+ *     (GCC Quirk: however for constant @nr we still need to do the masking
+ *             at compile time)
+ */
+
+static inline void set_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned long temp, flags;
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	bitops_lock(flags);
+
+	temp = *m;
+	*m = temp | (1UL << nr);
+
+	bitops_unlock(flags);
+}
+
+static inline void clear_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned long temp, flags;
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	bitops_lock(flags);
+
+	temp = *m;
+	*m = temp & ~(1UL << nr);
+
+	bitops_unlock(flags);
+}
+
+static inline void change_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned long temp, flags;
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	bitops_lock(flags);
+
+	temp = *m;
+	*m = temp ^ (1UL << nr);
+
+	bitops_unlock(flags);
+}
+
+static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned long old, flags;
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	bitops_lock(flags);
+
+	old = *m;
+	*m = old | (1 << nr);
+
+	bitops_unlock(flags);
+
+	return (old & (1 << nr)) != 0;
+}
+
+static inline int
+test_and_clear_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned long old, flags;
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	bitops_lock(flags);
+
+	old = *m;
+	*m = old & ~(1 << nr);
+
+	bitops_unlock(flags);
+
+	return (old & (1 << nr)) != 0;
+}
+
+static inline int
+test_and_change_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned long old, flags;
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	bitops_lock(flags);
+
+	old = *m;
+	*m = old ^ (1 << nr);
+
+	bitops_unlock(flags);
+
+	return (old & (1 << nr)) != 0;
+}
+
+#endif /* CONFIG_ARC_HAS_LLSC */
+
+/***************************************
+ * Non atomic variants
+ **************************************/
+
+static inline void __set_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned long temp;
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	temp = *m;
+	*m = temp | (1UL << nr);
+}
+
+static inline void __clear_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned long temp;
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	temp = *m;
+	*m = temp & ~(1UL << nr);
+}
+
+static inline void __change_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned long temp;
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	temp = *m;
+	*m = temp ^ (1UL << nr);
+}
+
+static inline int
+__test_and_set_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned long old;
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	old = *m;
+	*m = old | (1 << nr);
+
+	return (old & (1 << nr)) != 0;
+}
+
+static inline int
+__test_and_clear_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned long old;
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	old = *m;
+	*m = old & ~(1 << nr);
+
+	return (old & (1 << nr)) != 0;
+}
+
+static inline int
+__test_and_change_bit(unsigned long nr, volatile unsigned long *m)
+{
+	unsigned long old;
+	m += nr >> 5;
+
+	if (__builtin_constant_p(nr))
+		nr &= 0x1f;
+
+	old = *m;
+	*m = old ^ (1 << nr);
+
+	return (old & (1 << nr)) != 0;
+}
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static inline int
+__constant_test_bit(unsigned int nr, const volatile unsigned long *addr)
+{
+	return ((1UL << (nr & 31)) &
+		(((const volatile unsigned int *)addr)[nr >> 5])) != 0;
+}
+
+static inline int
+__test_bit(unsigned int nr, const volatile unsigned long *addr)
+{
+	unsigned long mask;
+
+	addr += nr >> 5;
+
+	/* ARC700 only considers 5 bits in bit-fiddling insn */
+	mask = 1 << nr;
+
+	return ((mask & *addr) != 0);
+}
+
+#define test_bit(nr, addr)	(__builtin_constant_p(nr) ? \
+					__constant_test_bit((nr), (addr)) : \
+					__test_bit((nr), (addr)))
+
+/*
+ * Count the number of zeros, starting from MSB
+ * Helper for fls( ) friends
+ * This is a pure count, so (1-32) or (0-31) doesn't apply
+ * It could be 0 to 32, based on num of 0's in there
+ * clz(0x8000_0000) = 0, clz(0xFFFF_FFFF)=0, clz(0) = 32, clz(1) = 31
+ */
+static inline __attribute__ ((const)) int clz(unsigned int x)
+{
+	unsigned int res;
+
+	__asm__ __volatile__(
+	"	norm.f  %0, %1		\n"
+	"	mov.n   %0, 0		\n"
+	"	add.p   %0, %0, 1	\n"
+	: "=r"(res)
+	: "r"(x)
+	: "cc");
+
+	return res;
+}
+
+static inline int constant_fls(int x)
+{
+	int r = 32;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff0000u)) {
+		x <<= 16;
+		r -= 16;
+	}
+	if (!(x & 0xff000000u)) {
+		x <<= 8;
+		r -= 8;
+	}
+	if (!(x & 0xf0000000u)) {
+		x <<= 4;
+		r -= 4;
+	}
+	if (!(x & 0xc0000000u)) {
+		x <<= 2;
+		r -= 2;
+	}
+	if (!(x & 0x80000000u)) {
+		x <<= 1;
+		r -= 1;
+	}
+	return r;
+}
+
+/*
+ * fls = Find Last Set in word
+ * @result: [1-32]
+ * fls(1) = 1, fls(0x80000000) = 32, fls(0) = 0
+ */
+static inline __attribute__ ((const)) int fls(unsigned long x)
+{
+	if (__builtin_constant_p(x))
+	       return constant_fls(x);
+
+	return 32 - clz(x);
+}
+
+/*
+ * __fls: Similar to fls, but zero based (0-31)
+ */
+static inline __attribute__ ((const)) int __fls(unsigned long x)
+{
+	if (!x)
+		return 0;
+	else
+		return fls(x) - 1;
+}
+
+/*
+ * ffs = Find First Set in word (LSB to MSB)
+ * @result: [1-32], 0 if all 0's
+ */
+#define ffs(x)	({ unsigned long __t = (x); fls(__t & -__t); })
+
+/*
+ * __ffs: Similar to ffs, but zero based (0-31)
+ */
+static inline __attribute__ ((const)) int __ffs(unsigned long word)
+{
+	if (!word)
+		return word;
+
+	return ffs(word) - 1;
+}
+
+/*
+ * ffz = Find First Zero in word.
+ * @return:[0-31], 32 if all 1's
+ */
+#define ffz(x)	__ffs(~(x))
+
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/lock.h>
+
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/le.h>
+#include <asm-generic/bitops/ext2-atomic-setbit.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/arc/include/asm/bug.h b/arch/arc/include/asm/bug.h
new file mode 100644
index 00000000000..5b18e94c667
--- /dev/null
+++ b/arch/arc/include/asm/bug.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_BUG_H
+#define _ASM_ARC_BUG_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+
+struct task_struct;
+
+void show_regs(struct pt_regs *regs);
+void show_stacktrace(struct task_struct *tsk, struct pt_regs *regs);
+void show_kernel_fault_diag(const char *str, struct pt_regs *regs,
+			    unsigned long address);
+void die(const char *str, struct pt_regs *regs, unsigned long address);
+
+#define BUG()	do {				\
+	dump_stack();					\
+	pr_warn("Kernel BUG in %s: %s: %d!\n",	\
+		__FILE__, __func__,  __LINE__);	\
+} while (0)
+
+#define HAVE_ARCH_BUG
+
+#include <asm-generic/bug.h>
+
+#endif	/* !__ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
new file mode 100644
index 00000000000..b3c750979aa
--- /dev/null
+++ b/arch/arc/include/asm/cache.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARC_ASM_CACHE_H
+#define __ARC_ASM_CACHE_H
+
+/* In case $$ not config, setup a dummy number for rest of kernel */
+#ifndef CONFIG_ARC_CACHE_LINE_SHIFT
+#define L1_CACHE_SHIFT		6
+#else
+#define L1_CACHE_SHIFT		CONFIG_ARC_CACHE_LINE_SHIFT
+#endif
+
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+#define CACHE_LINE_MASK		(~(L1_CACHE_BYTES - 1))
+
+/*
+ * ARC700 doesn't cache any access in top 256M.
+ * Ideal for wiring memory mapped peripherals as we don't need to do
+ * explicit uncached accesses (LD.di/ST.di) hence more portable drivers
+ */
+#define ARC_UNCACHED_ADDR_SPACE	0xc0000000
+
+#ifndef __ASSEMBLY__
+
+/* Uncached access macros */
+#define arc_read_uncached_32(ptr)	\
+({					\
+	unsigned int __ret;		\
+	__asm__ __volatile__(		\
+	"	ld.di %0, [%1]	\n"	\
+	: "=r"(__ret)			\
+	: "r"(ptr));			\
+	__ret;				\
+})
+
+#define arc_write_uncached_32(ptr, data)\
+({					\
+	__asm__ __volatile__(		\
+	"	st.di %0, [%1]	\n"	\
+	:				\
+	: "r"(data), "r"(ptr));		\
+})
+
+#define ARCH_DMA_MINALIGN      L1_CACHE_BYTES
+
+extern void arc_cache_init(void);
+extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
+extern void read_decode_cache_bcr(void);
+
+#endif	/* !__ASSEMBLY__ */
+
+/* Instruction cache related Auxiliary registers */
+#define ARC_REG_IC_BCR		0x77	/* Build Config reg */
+#define ARC_REG_IC_IVIC		0x10
+#define ARC_REG_IC_CTRL		0x11
+#define ARC_REG_IC_IVIL		0x19
+#if defined(CONFIG_ARC_MMU_V3)
+#define ARC_REG_IC_PTAG		0x1E
+#endif
+
+/* Bit val in IC_CTRL */
+#define IC_CTRL_CACHE_DISABLE   0x1
+
+/* Data cache related Auxiliary registers */
+#define ARC_REG_DC_BCR		0x72	/* Build Config reg */
+#define ARC_REG_DC_IVDC		0x47
+#define ARC_REG_DC_CTRL		0x48
+#define ARC_REG_DC_IVDL		0x4A
+#define ARC_REG_DC_FLSH		0x4B
+#define ARC_REG_DC_FLDL		0x4C
+#if defined(CONFIG_ARC_MMU_V3)
+#define ARC_REG_DC_PTAG		0x5C
+#endif
+
+/* Bit val in DC_CTRL */
+#define DC_CTRL_INV_MODE_FLUSH  0x40
+#define DC_CTRL_FLUSH_STATUS    0x100
+
+#endif /* _ASM_CACHE_H */
diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h
new file mode 100644
index 00000000000..6abc4972bc9
--- /dev/null
+++ b/arch/arc/include/asm/cacheflush.h
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  vineetg: May 2011: for Non-aliasing VIPT D-cache following can be NOPs
+ *   -flush_cache_dup_mm (fork)
+ *   -likewise for flush_cache_mm (exit/execve)
+ *   -likewise for flush_cache_{range,page} (munmap, exit, COW-break)
+ *
+ *  vineetg: April 2008
+ *   -Added a critical CacheLine flush to copy_to_user_page( ) which
+ *     was causing gdbserver to not setup breakpoints consistently
+ */
+
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+#include <linux/mm.h>
+#include <asm/shmparam.h>
+
+/*
+ * Semantically we need this because icache doesn't snoop dcache/dma.
+ * However ARC Cache flush requires paddr as well as vaddr, latter not available
+ * in the flush_icache_page() API. So we no-op it but do the equivalent work
+ * in update_mmu_cache()
+ */
+#define flush_icache_page(vma, page)
+
+void flush_cache_all(void);
+
+void flush_icache_range(unsigned long start, unsigned long end);
+void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len);
+void __inv_icache_page(unsigned long paddr, unsigned long vaddr);
+void ___flush_dcache_page(unsigned long paddr, unsigned long vaddr);
+#define __flush_dcache_page(p, v)	\
+		___flush_dcache_page((unsigned long)p, (unsigned long)v)
+
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
+
+void flush_dcache_page(struct page *page);
+
+void dma_cache_wback_inv(unsigned long start, unsigned long sz);
+void dma_cache_inv(unsigned long start, unsigned long sz);
+void dma_cache_wback(unsigned long start, unsigned long sz);
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+/* TBD: optimize this */
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+#define flush_cache_dup_mm(mm)			/* called on fork (VIVT only) */
+
+#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING
+
+#define flush_cache_mm(mm)			/* called on munmap/exit */
+#define flush_cache_range(mm, u_vstart, u_vend)
+#define flush_cache_page(vma, u_vaddr, pfn)	/* PF handling/COW-break */
+
+#else	/* VIPT aliasing dcache */
+
+/* To clear out stale userspace mappings */
+void flush_cache_mm(struct mm_struct *mm);
+void flush_cache_range(struct vm_area_struct *vma,
+	unsigned long start,unsigned long end);
+void flush_cache_page(struct vm_area_struct *vma,
+	unsigned long user_addr, unsigned long page);
+
+/*
+ * To make sure that userspace mapping is flushed to memory before
+ * get_user_pages() uses a kernel mapping to access the page
+ */
+#define ARCH_HAS_FLUSH_ANON_PAGE
+void flush_anon_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long u_vaddr);
+
+#endif	/* CONFIG_ARC_CACHE_VIPT_ALIASING */
+
+/*
+ * A new pagecache page has PG_arch_1 clear - thus dcache dirty by default
+ * This works around some PIO based drivers which don't call flush_dcache_page
+ * to record that they dirtied the dcache
+ */
+#define PG_dc_clean	PG_arch_1
+
+/*
+ * Simple wrapper over config option
+ * Bootup code ensures that hardware matches kernel configuration
+ */
+static inline int cache_is_vipt_aliasing(void)
+{
+	return IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
+}
+
+#define CACHE_COLOR(addr)	(((unsigned long)(addr) >> (PAGE_SHIFT)) & 1)
+
+/*
+ * checks if two addresses (after page aligning) index into same cache set
+ */
+#define addr_not_cache_congruent(addr1, addr2)				\
+({									\
+	cache_is_vipt_aliasing() ? 					\
+		(CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0;		\
+})
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
+do {									\
+	memcpy(dst, src, len);						\
+	if (vma->vm_flags & VM_EXEC)					\
+		__sync_icache_dcache((unsigned long)(dst), vaddr, len);	\
+} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)		\
+	memcpy(dst, src, len);						\
+
+#endif
diff --git a/arch/arc/include/asm/checksum.h b/arch/arc/include/asm/checksum.h
new file mode 100644
index 00000000000..10957298b7a
--- /dev/null
+++ b/arch/arc/include/asm/checksum.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Joern Rennecke  <joern.rennecke@embecosm.com>: Jan 2012
+ *  -Insn Scheduling improvements to csum core routines.
+ *      = csum_fold( ) largely derived from ARM version.
+ *      = ip_fast_cum( ) to have module scheduling
+ *  -gcc 4.4.x broke networking. Alias analysis needed to be primed.
+ *   worked around by adding memory clobber to ip_fast_csum( )
+ *
+ * vineetg: May 2010
+ *  -Rewrote ip_fast_cscum( ) and csum_fold( ) with fast inline asm
+ */
+
+#ifndef _ASM_ARC_CHECKSUM_H
+#define _ASM_ARC_CHECKSUM_H
+
+/*
+ *	Fold a partial checksum
+ *
+ *  The 2 swords comprising the 32bit sum are added, any carry to 16th bit
+ *  added back and final sword result inverted.
+ */
+static inline __sum16 csum_fold(__wsum s)
+{
+	unsigned r = s << 16 | s >> 16;	/* ror */
+	s = ~s;
+	s -= r;
+	return s >> 16;
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ */
+static inline __sum16
+ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	const void *ptr = iph;
+	unsigned int tmp, tmp2, sum;
+
+	__asm__(
+	"	ld.ab  %0, [%3, 4]		\n"
+	"	ld.ab  %2, [%3, 4]		\n"
+	"	sub    %1, %4, 2		\n"
+	"	lsr.f  lp_count, %1, 1		\n"
+	"	bcc    0f			\n"
+	"	add.f  %0, %0, %2		\n"
+	"	ld.ab  %2, [%3, 4]		\n"
+	"0:	lp     1f			\n"
+	"	ld.ab  %1, [%3, 4]		\n"
+	"	adc.f  %0, %0, %2		\n"
+	"	ld.ab  %2, [%3, 4]		\n"
+	"	adc.f  %0, %0, %1		\n"
+	"1:	adc.f  %0, %0, %2		\n"
+	"	add.cs %0,%0,1			\n"
+	: "=&r"(sum), "=r"(tmp), "=&r"(tmp2), "+&r" (ptr)
+	: "r"(ihl)
+	: "cc", "lp_count", "memory");
+
+	return csum_fold(sum);
+}
+
+/*
+ * TCP pseudo Header is 12 bytes:
+ * SA [4], DA [4], zeroes [1], Proto[1], TCP Seg(hdr+data) Len [2]
+ */
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		   unsigned short proto, __wsum sum)
+{
+	__asm__ __volatile__(
+	"	add.f %0, %0, %1	\n"
+	"	adc.f %0, %0, %2	\n"
+	"	adc.f %0, %0, %3	\n"
+	"	adc.f %0, %0, %4	\n"
+	"	adc   %0, %0, 0		\n"
+	: "+&r"(sum)
+	: "r"(saddr), "r"(daddr),
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	  "r"(len),
+#else
+	  "r"(len << 8),
+#endif
+	  "r"(htons(proto))
+	: "cc");
+
+	return sum;
+}
+
+#define csum_fold csum_fold
+#define ip_fast_csum ip_fast_csum
+#define csum_tcpudp_nofold csum_tcpudp_nofold
+
+#include <asm-generic/checksum.h>
+
+#endif /* _ASM_ARC_CHECKSUM_H */
diff --git a/arch/arc/include/asm/clk.h b/arch/arc/include/asm/clk.h
new file mode 100644
index 00000000000..bf9d29f5bd5
--- /dev/null
+++ b/arch/arc/include/asm/clk.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_CLK_H
+#define _ASM_ARC_CLK_H
+
+/* Although we can't really hide core_freq, the accessor is still better way */
+extern unsigned long core_freq;
+
+static inline unsigned long arc_get_core_freq(void)
+{
+	return core_freq;
+}
+
+extern int arc_set_core_freq(unsigned long);
+
+#endif
diff --git a/arch/arc/include/asm/cmpxchg.h b/arch/arc/include/asm/cmpxchg.h
new file mode 100644
index 00000000000..03cd6894855
--- /dev/null
+++ b/arch/arc/include/asm/cmpxchg.h
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARC_CMPXCHG_H
+#define __ASM_ARC_CMPXCHG_H
+
+#include <linux/types.h>
+#include <asm/smp.h>
+
+#ifdef CONFIG_ARC_HAS_LLSC
+
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__(
+	"1:	llock   %0, [%1]	\n"
+	"	brne    %0, %2, 2f	\n"
+	"	scond   %3, [%1]	\n"
+	"	bnz     1b		\n"
+	"2:				\n"
+	: "=&r"(prev)
+	: "r"(ptr), "ir"(expected),
+	  "r"(new) /* can't be "ir". scond can't take limm for "b" */
+	: "cc");
+
+	return prev;
+}
+
+#else
+
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
+{
+	unsigned long flags;
+	int prev;
+	volatile unsigned long *p = ptr;
+
+	atomic_ops_lock(flags);
+	prev = *p;
+	if (prev == expected)
+		*p = new;
+	atomic_ops_unlock(flags);
+	return prev;
+}
+
+#endif /* CONFIG_ARC_HAS_LLSC */
+
+#define cmpxchg(ptr, o, n) ((typeof(*(ptr)))__cmpxchg((ptr), \
+				(unsigned long)(o), (unsigned long)(n)))
+
+/*
+ * Since not supported natively, ARC cmpxchg() uses atomic_ops_lock (UP/SMP)
+ * just to gaurantee semantics.
+ * atomic_cmpxchg() needs to use the same locks as it's other atomic siblings
+ * which also happens to be atomic_ops_lock.
+ *
+ * Thus despite semantically being different, implementation of atomic_cmpxchg()
+ * is same as cmpxchg().
+ */
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+
+
+/*
+ * xchg (reg with memory) based on "Native atomic" EX insn
+ */
+static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
+				   int size)
+{
+	extern unsigned long __xchg_bad_pointer(void);
+
+	switch (size) {
+	case 4:
+		__asm__ __volatile__(
+		"	ex  %0, [%1]	\n"
+		: "+r"(val)
+		: "r"(ptr)
+		: "memory");
+
+		return val;
+	}
+	return __xchg_bad_pointer();
+}
+
+#define _xchg(ptr, with) ((typeof(*(ptr)))__xchg((unsigned long)(with), (ptr), \
+						 sizeof(*(ptr))))
+
+/*
+ * On ARC700, EX insn is inherently atomic, so by default "vanilla" xchg() need
+ * not require any locking. However there's a quirk.
+ * ARC lacks native CMPXCHG, thus emulated (see above), using external locking -
+ * incidently it "reuses" the same atomic_ops_lock used by atomic APIs.
+ * Now, llist code uses cmpxchg() and xchg() on same data, so xchg() needs to
+ * abide by same serializing rules, thus ends up using atomic_ops_lock as well.
+ *
+ * This however is only relevant if SMP and/or ARC lacks LLSC
+ *   if (UP or LLSC)
+ *      xchg doesn't need serialization
+ *   else <==> !(UP or LLSC) <==> (!UP and !LLSC) <==> (SMP and !LLSC)
+ *      xchg needs serialization
+ */
+
+#if !defined(CONFIG_ARC_HAS_LLSC) && defined(CONFIG_SMP)
+
+#define xchg(ptr, with)			\
+({					\
+	unsigned long flags;		\
+	typeof(*(ptr)) old_val;		\
+					\
+	atomic_ops_lock(flags);		\
+	old_val = _xchg(ptr, with);	\
+	atomic_ops_unlock(flags);	\
+	old_val;			\
+})
+
+#else
+
+#define xchg(ptr, with)  _xchg(ptr, with)
+
+#endif
+
+/*
+ * "atomic" variant of xchg()
+ * REQ: It needs to follow the same serialization rules as other atomic_xxx()
+ * Since xchg() doesn't always do that, it would seem that following defintion
+ * is incorrect. But here's the rationale:
+ *   SMP : Even xchg() takes the atomic_ops_lock, so OK.
+ *   LLSC: atomic_ops_lock are not relevent at all (even if SMP, since LLSC
+ *         is natively "SMP safe", no serialization required).
+ *   UP  : other atomics disable IRQ, so no way a difft ctxt atomic_xchg()
+ *         could clobber them. atomic_xchg() itself would be 1 insn, so it
+ *         can't be clobbered by others. Thus no serialization required when
+ *         atomic_xchg is involved.
+ */
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+#endif
diff --git a/arch/arc/include/asm/current.h b/arch/arc/include/asm/current.h
new file mode 100644
index 00000000000..87b918585c4
--- /dev/null
+++ b/arch/arc/include/asm/current.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Vineetg: May 16th, 2008
+ *  - Current macro is now implemented as "global register" r25
+ */
+
+#ifndef _ASM_ARC_CURRENT_H
+#define _ASM_ARC_CURRENT_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+
+register struct task_struct *curr_arc asm("r25");
+#define current (curr_arc)
+
+#else
+#include <asm-generic/current.h>
+#endif /* ! CONFIG_ARC_CURR_IN_REG */
+
+#endif /* ! __ASSEMBLY__ */
+
+#endif	/* __KERNEL__ */
+
+#endif /* _ASM_ARC_CURRENT_H */
diff --git a/arch/arc/include/asm/delay.h b/arch/arc/include/asm/delay.h
new file mode 100644
index 00000000000..43de3025698
--- /dev/null
+++ b/arch/arc/include/asm/delay.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Delay routines using pre computed loops_per_jiffy value.
+ *
+ * vineetg: Feb 2012
+ *  -Rewrote in "C" to avoid dealing with availability of H/w MPY
+ *  -Also reduced the num of MPY operations from 3 to 2
+ *
+ * Amit Bhor: Codito Technologies 2004
+ */
+
+#ifndef __ASM_ARC_UDELAY_H
+#define __ASM_ARC_UDELAY_H
+
+#include <asm/param.h>		/* HZ */
+
+static inline void __delay(unsigned long loops)
+{
+	__asm__ __volatile__(
+	"1:	sub.f %0, %0, 1	\n"
+	"	jpnz 1b		\n"
+	: "+r"(loops)
+	:
+	: "cc");
+}
+
+extern void __bad_udelay(void);
+
+/*
+ * Normal Math for computing loops in "N" usecs
+ *  -we have precomputed @loops_per_jiffy
+ *  -1 sec has HZ jiffies
+ * loops per "N" usecs = ((loops_per_jiffy * HZ / 1000000) * N)
+ *
+ * Approximate Division by multiplication:
+ *  -Mathematically if we multiply and divide a number by same value the
+ *   result remains unchanged:  In this case, we use 2^32
+ *  -> (loops_per_N_usec * 2^32 ) / 2^32
+ *  -> (((loops_per_jiffy * HZ / 1000000) * N) * 2^32) / 2^32
+ *  -> (loops_per_jiffy * HZ * N * 4295) / 2^32
+ *
+ *  -Divide by 2^32 is very simply right shift by 32
+ *  -We simply need to ensure that the multiply per above eqn happens in
+ *   64-bit precision (if CPU doesn't support it - gcc can emaulate it)
+ */
+
+static inline void __udelay(unsigned long usecs)
+{
+	unsigned long loops;
+
+	/* (u64) cast ensures 64 bit MPY - real or emulated
+	 * HZ * 4295 is pre-evaluated by gcc - hence only 2 mpy ops
+	 */
+	loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32;
+
+	__delay(loops);
+}
+
+#define udelay(n) (__builtin_constant_p(n) ? ((n) > 20000 ? __bad_udelay() \
+				: __udelay(n)) : __udelay(n))
+
+#endif /* __ASM_ARC_UDELAY_H */
diff --git a/arch/arc/include/asm/disasm.h b/arch/arc/include/asm/disasm.h
new file mode 100644
index 00000000000..f1cce3d059a
--- /dev/null
+++ b/arch/arc/include/asm/disasm.h
@@ -0,0 +1,116 @@
+/*
+ * several functions that help interpret ARC instructions
+ * used for unaligned accesses, kprobes and kgdb
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARC_DISASM_H__
+#define __ARC_DISASM_H__
+
+enum {
+	op_Bcc = 0, op_BLcc = 1, op_LD = 2, op_ST = 3, op_MAJOR_4 = 4,
+	op_MAJOR_5 = 5, op_LD_ADD = 12, op_ADD_SUB_SHIFT = 13,
+	op_ADD_MOV_CMP = 14, op_S = 15, op_LD_S = 16, op_LDB_S = 17,
+	op_LDW_S = 18, op_LDWX_S = 19, op_ST_S = 20, op_STB_S = 21,
+	op_STW_S = 22, op_Su5 = 23, op_SP = 24, op_GP = 25,
+	op_Pcl = 26, op_MOV_S = 27, op_ADD_CMP = 28, op_BR_S = 29,
+	op_B_S = 30, op_BL_S = 31
+};
+
+enum flow {
+	noflow,
+	direct_jump,
+	direct_call,
+	indirect_jump,
+	indirect_call,
+	invalid_instr
+};
+
+#define IS_BIT(word, n)		((word) & (1<<n))
+#define BITS(word, s, e)	(((word) >> (s)) & (~((-2) << ((e) - (s)))))
+
+#define MAJOR_OPCODE(word)	(BITS((word), 27, 31))
+#define MINOR_OPCODE(word)	(BITS((word), 16, 21))
+#define FIELD_A(word)		(BITS((word), 0, 5))
+#define FIELD_B(word)		((BITS((word), 12, 14)<<3) | \
+				(BITS((word), 24, 26)))
+#define FIELD_C(word)		(BITS((word), 6, 11))
+#define FIELD_u6(word)		FIELDC(word)
+#define FIELD_s12(word)		sign_extend(((BITS((word), 0, 5) << 6) | \
+					BITS((word), 6, 11)), 12)
+
+/* note that for BL/BRcc these two macro's need another AND statement to mask
+ * out bit 1 (make the result a multiple of 4) */
+#define FIELD_s9(word)		sign_extend(((BITS(word, 15, 15) << 8) | \
+					BITS(word, 16, 23)), 9)
+#define FIELD_s21(word)		sign_extend(((BITS(word, 6, 15) << 11) | \
+					(BITS(word, 17, 26) << 1)), 12)
+#define FIELD_s25(word)		sign_extend(((BITS(word, 0, 3) << 21) | \
+					(BITS(word, 6, 15) << 11) | \
+					(BITS(word, 17, 26) << 1)), 12)
+
+/* note: these operate on 16 bits! */
+#define FIELD_S_A(word)		((BITS((word), 2, 2)<<3) | BITS((word), 0, 2))
+#define FIELD_S_B(word)		((BITS((word), 10, 10)<<3) | \
+				BITS((word), 8, 10))
+#define FIELD_S_C(word)		((BITS((word), 7, 7)<<3) | BITS((word), 5, 7))
+#define FIELD_S_H(word)		((BITS((word), 0, 2)<<3) | BITS((word), 5, 8))
+#define FIELD_S_u5(word)	(BITS((word), 0, 4))
+#define FIELD_S_u6(word)	(BITS((word), 0, 4) << 1)
+#define FIELD_S_u7(word)	(BITS((word), 0, 4) << 2)
+#define FIELD_S_u10(word)	(BITS((word), 0, 7) << 2)
+#define FIELD_S_s7(word)	sign_extend(BITS((word), 0, 5) << 1, 9)
+#define FIELD_S_s8(word)	sign_extend(BITS((word), 0, 7) << 1, 9)
+#define FIELD_S_s9(word)	sign_extend(BITS((word), 0, 8), 9)
+#define FIELD_S_s10(word)	sign_extend(BITS((word), 0, 8) << 1, 10)
+#define FIELD_S_s11(word)	sign_extend(BITS((word), 0, 8) << 2, 11)
+#define FIELD_S_s13(word)	sign_extend(BITS((word), 0, 10) << 2, 13)
+
+#define STATUS32_L		0x00000100
+#define REG_LIMM		62
+
+struct disasm_state {
+	/* generic info */
+	unsigned long words[2];
+	int instr_len;
+	int major_opcode;
+	/* info for branch/jump */
+	int is_branch;
+	int target;
+	int delay_slot;
+	enum flow flow;
+	/* info for load/store */
+	int src1, src2, src3, dest, wb_reg;
+	int zz, aa, x, pref, di;
+	int fault, write;
+};
+
+static inline int sign_extend(int value, int bits)
+{
+	if (IS_BIT(value, (bits - 1)))
+		value |= (0xffffffff << bits);
+
+	return value;
+}
+
+static inline int is_short_instr(unsigned long addr)
+{
+	uint16_t word = *((uint16_t *)addr);
+	int opcode = (word >> 11) & 0x1F;
+	return (opcode >= 0x0B);
+}
+
+void disasm_instr(unsigned long addr, struct disasm_state *state,
+	int userspace, struct pt_regs *regs, struct callee_regs *cregs);
+int disasm_next_pc(unsigned long pc, struct pt_regs *regs, struct callee_regs
+	*cregs, unsigned long *fall_thru, unsigned long *target);
+long get_reg(int reg, struct pt_regs *regs, struct callee_regs *cregs);
+void set_reg(int reg, long val, struct pt_regs *regs,
+		struct callee_regs *cregs);
+
+#endif	/* __ARC_DISASM_H__ */
diff --git a/arch/arc/include/asm/dma-mapping.h b/arch/arc/include/asm/dma-mapping.h
new file mode 100644
index 00000000000..45b8e0cea17
--- /dev/null
+++ b/arch/arc/include/asm/dma-mapping.h
@@ -0,0 +1,221 @@
+/*
+ * DMA Mapping glue for ARC
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARC_DMA_MAPPING_H
+#define ASM_ARC_DMA_MAPPING_H
+
+#include <asm-generic/dma-coherent.h>
+#include <asm/cacheflush.h>
+
+#ifndef CONFIG_ARC_PLAT_NEEDS_CPU_TO_DMA
+/*
+ * dma_map_* API take cpu addresses, which is kernel logical address in the
+ * untranslated address space (0x8000_0000) based. The dma address (bus addr)
+ * ideally needs to be 0x0000_0000 based hence these glue routines.
+ * However given that intermediate bus bridges can ignore the high bit, we can
+ * do with these routines being no-ops.
+ * If a platform/device comes up which sriclty requires 0 based bus addr
+ * (e.g. AHB-PCI bridge on Angel4 board), then it can provide it's own versions
+ */
+#define plat_dma_addr_to_kernel(dev, addr) ((unsigned long)(addr))
+#define plat_kernel_addr_to_dma(dev, ptr) ((dma_addr_t)(ptr))
+
+#else
+#include <plat/dma_addr.h>
+#endif
+
+void *dma_alloc_noncoherent(struct device *dev, size_t size,
+			    dma_addr_t *dma_handle, gfp_t gfp);
+
+void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr,
+			  dma_addr_t dma_handle);
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			 dma_addr_t *dma_handle, gfp_t gfp);
+
+void dma_free_coherent(struct device *dev, size_t size, void *kvaddr,
+		       dma_addr_t dma_handle);
+
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+			   void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+				  void *cpu_addr, dma_addr_t dma_addr,
+				  size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
+/*
+ * streaming DMA Mapping API...
+ * CPU accesses page via normal paddr, thus needs to explicitly made
+ * consistent before each use
+ */
+
+static inline void __inline_dma_cache_sync(unsigned long paddr, size_t size,
+					   enum dma_data_direction dir)
+{
+	switch (dir) {
+	case DMA_FROM_DEVICE:
+		dma_cache_inv(paddr, size);
+		break;
+	case DMA_TO_DEVICE:
+		dma_cache_wback(paddr, size);
+		break;
+	case DMA_BIDIRECTIONAL:
+		dma_cache_wback_inv(paddr, size);
+		break;
+	default:
+		pr_err("Invalid DMA dir [%d] for OP @ %lx\n", dir, paddr);
+	}
+}
+
+void __arc_dma_cache_sync(unsigned long paddr, size_t size,
+			  enum dma_data_direction dir);
+
+#define _dma_cache_sync(addr, sz, dir)			\
+do {							\
+	if (__builtin_constant_p(dir))			\
+		__inline_dma_cache_sync(addr, sz, dir);	\
+	else						\
+		__arc_dma_cache_sync(addr, sz, dir);	\
+}							\
+while (0);
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+	       enum dma_data_direction dir)
+{
+	_dma_cache_sync((unsigned long)cpu_addr, size, dir);
+	return plat_kernel_addr_to_dma(dev, cpu_addr);
+}
+
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+		 size_t size, enum dma_data_direction dir)
+{
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction dir)
+{
+	unsigned long paddr = page_to_phys(page) + offset;
+	return dma_map_single(dev, (void *)paddr, size, dir);
+}
+
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_handle,
+	       size_t size, enum dma_data_direction dir)
+{
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg,
+	   int nents, enum dma_data_direction dir)
+{
+	struct scatterlist *s;
+	int i;
+
+	for_each_sg(sg, s, nents, i)
+		s->dma_address = dma_map_page(dev, sg_page(s), s->offset,
+					       s->length, dir);
+
+	return nents;
+}
+
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+	     int nents, enum dma_data_direction dir)
+{
+	struct scatterlist *s;
+	int i;
+
+	for_each_sg(sg, s, nents, i)
+		dma_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir);
+}
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			size_t size, enum dma_data_direction dir)
+{
+	_dma_cache_sync(plat_dma_addr_to_kernel(dev, dma_handle), size,
+			DMA_FROM_DEVICE);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+			   size_t size, enum dma_data_direction dir)
+{
+	_dma_cache_sync(plat_dma_addr_to_kernel(dev, dma_handle), size,
+			DMA_TO_DEVICE);
+}
+
+static inline void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			      unsigned long offset, size_t size,
+			      enum dma_data_direction direction)
+{
+	_dma_cache_sync(plat_dma_addr_to_kernel(dev, dma_handle) + offset,
+			size, DMA_FROM_DEVICE);
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction direction)
+{
+	_dma_cache_sync(plat_dma_addr_to_kernel(dev, dma_handle) + offset,
+			size, DMA_TO_DEVICE);
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+		    enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nelems; i++, sg++)
+		_dma_cache_sync((unsigned int)sg_virt(sg), sg->length, dir);
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+		       enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nelems; i++, sg++)
+		_dma_cache_sync((unsigned int)sg_virt(sg), sg->length, dir);
+}
+
+static inline int dma_supported(struct device *dev, u64 dma_mask)
+{
+	/* Support 32 bit DMA mask exclusively */
+	return dma_mask == DMA_BIT_MASK(32);
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return 0;
+}
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+
+	*dev->dma_mask = dma_mask;
+
+	return 0;
+}
+
+#endif
diff --git a/arch/arc/include/asm/dma.h b/arch/arc/include/asm/dma.h
new file mode 100644
index 00000000000..ca7c45181de
--- /dev/null
+++ b/arch/arc/include/asm/dma.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARC_DMA_H
+#define ASM_ARC_DMA_H
+
+#define MAX_DMA_ADDRESS 0xC0000000
+
+#endif
diff --git a/arch/arc/include/asm/elf.h b/arch/arc/include/asm/elf.h
new file mode 100644
index 00000000000..a2628285768
--- /dev/null
+++ b/arch/arc/include/asm/elf.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARC_ELF_H
+#define __ASM_ARC_ELF_H
+
+#include <linux/types.h>
+#include <uapi/asm/elf.h>
+
+/* These ELF defines belong to uapi but libc elf.h already defines them */
+#define EM_ARCOMPACT		93
+
+/* ARC Relocations (kernel Modules only) */
+#define  R_ARC_32		0x4
+#define  R_ARC_32_ME		0x1B
+#define  R_ARC_S25H_PCREL	0x10
+#define  R_ARC_S25W_PCREL	0x11
+
+/*to set parameters in the core dumps */
+#define ELF_ARCH		EM_ARCOMPACT
+#define ELF_CLASS		ELFCLASS32
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define ELF_DATA		ELFDATA2MSB
+#else
+#define ELF_DATA		ELFDATA2LSB
+#endif
+
+/*
+ * To ensure that
+ *  -we don't load something for the wrong architecture.
+ *  -The userspace is using the correct syscall ABI
+ */
+struct elf32_hdr;
+extern int elf_check_arch(const struct elf32_hdr *);
+#define elf_check_arch	elf_check_arch
+
+#define CORE_DUMP_USE_REGSET
+
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader.  We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ */
+#define ELF_ET_DYN_BASE		(2 * TASK_SIZE / 3)
+
+/*
+ * When the program starts, a1 contains a pointer to a function to be
+ * registered with atexit, as per the SVR4 ABI.  A value of 0 means we
+ * have no such handler.
+ */
+#define ELF_PLAT_INIT(_r, load_addr)	((_r)->r0 = 0)
+
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this cpu supports.
+ */
+#define ELF_HWCAP	(0)
+
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ */
+#define ELF_PLATFORM	(NULL)
+
+#endif
diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h
new file mode 100644
index 00000000000..884081099f8
--- /dev/null
+++ b/arch/arc/include/asm/entry.h
@@ -0,0 +1,648 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Vineetg: March 2009 (Supporting 2 levels of Interrupts)
+ *  Stack switching code can no longer reliably rely on the fact that
+ *  if we are NOT in user mode, stack is switched to kernel mode.
+ *  e.g. L2 IRQ interrupted a L1 ISR which had not yet completed
+ *  it's prologue including stack switching from user mode
+ *
+ * Vineetg: Aug 28th 2008: Bug #94984
+ *  -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap
+ *   Normally CPU does this automatically, however when doing FAKE rtie,
+ *   we also need to explicitly do this. The problem in macros
+ *   FAKE_RET_FROM_EXCPN and FAKE_RET_FROM_EXCPN_LOCK_IRQ was that this bit
+ *   was being "CLEARED" rather then "SET". Actually "SET" clears ZOL context
+ *
+ * Vineetg: May 5th 2008
+ *  -Modified CALLEE_REG save/restore macros to handle the fact that
+ *      r25 contains the kernel current task ptr
+ *  - Defined Stack Switching Macro to be reused in all intr/excp hdlrs
+ *  - Shaved off 11 instructions from RESTORE_ALL_INT1 by using the
+ *      address Write back load ld.ab instead of seperate ld/add instn
+ *
+ * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
+ */
+
+#ifndef __ASM_ARC_ENTRY_H
+#define __ASM_ARC_ENTRY_H
+
+#ifdef __ASSEMBLY__
+#include <asm/unistd.h>		/* For NR_syscalls defination */
+#include <asm/asm-offsets.h>
+#include <asm/arcregs.h>
+#include <asm/ptrace.h>
+#include <asm/processor.h>	/* For VMALLOC_START */
+#include <asm/thread_info.h>	/* For THREAD_SIZE */
+#include <asm/mmu.h>
+
+/* Note on the LD/ST addr modes with addr reg wback
+ *
+ * LD.a same as LD.aw
+ *
+ * LD.a    reg1, [reg2, x]  => Pre Incr
+ *      Eff Addr for load = [reg2 + x]
+ *
+ * LD.ab   reg1, [reg2, x]  => Post Incr
+ *      Eff Addr for load = [reg2]
+ */
+
+.macro PUSH reg
+	st.a	\reg, [sp, -4]
+.endm
+
+.macro PUSHAX aux
+	lr	r9, [\aux]
+	PUSH	r9
+.endm
+
+.macro POP reg
+	ld.ab	\reg, [sp, 4]
+.endm
+
+.macro POPAX aux
+	POP	r9
+	sr	r9, [\aux]
+.endm
+
+/*--------------------------------------------------------------
+ * Helpers to save/restore Scratch Regs:
+ * used by Interrupt/Exception Prologue/Epilogue
+ *-------------------------------------------------------------*/
+.macro  SAVE_R0_TO_R12
+	PUSH	r0
+	PUSH	r1
+	PUSH	r2
+	PUSH	r3
+	PUSH	r4
+	PUSH	r5
+	PUSH	r6
+	PUSH	r7
+	PUSH	r8
+	PUSH	r9
+	PUSH	r10
+	PUSH	r11
+	PUSH	r12
+.endm
+
+.macro RESTORE_R12_TO_R0
+	POP	r12
+	POP	r11
+	POP	r10
+	POP	r9
+	POP	r8
+	POP	r7
+	POP	r6
+	POP	r5
+	POP	r4
+	POP	r3
+	POP	r2
+	POP	r1
+	POP	r0
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	ld	r25, [sp, 12]
+#endif
+.endm
+
+/*--------------------------------------------------------------
+ * Helpers to save/restore callee-saved regs:
+ * used by several macros below
+ *-------------------------------------------------------------*/
+.macro SAVE_R13_TO_R24
+	PUSH	r13
+	PUSH	r14
+	PUSH	r15
+	PUSH	r16
+	PUSH	r17
+	PUSH	r18
+	PUSH	r19
+	PUSH	r20
+	PUSH	r21
+	PUSH	r22
+	PUSH	r23
+	PUSH	r24
+.endm
+
+.macro RESTORE_R24_TO_R13
+	POP	r24
+	POP	r23
+	POP	r22
+	POP	r21
+	POP	r20
+	POP	r19
+	POP	r18
+	POP	r17
+	POP	r16
+	POP	r15
+	POP	r14
+	POP	r13
+.endm
+
+#define OFF_USER_R25_FROM_R24	(SZ_CALLEE_REGS + SZ_PT_REGS - 8)/4
+
+/*--------------------------------------------------------------
+ * Collect User Mode callee regs as struct callee_regs - needed by
+ * fork/do_signal/unaligned-access-emulation.
+ * (By default only scratch regs are saved on entry to kernel)
+ *
+ * Special handling for r25 if used for caching Task Pointer.
+ * It would have been saved in task->thread.user_r25 already, but to keep
+ * the interface same it is copied into regular r25 placeholder in
+ * struct callee_regs.
+ *-------------------------------------------------------------*/
+.macro SAVE_CALLEE_SAVED_USER
+
+	SAVE_R13_TO_R24
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	; Retrieve orig r25 and save it on stack
+	ld.as   r12, [sp, OFF_USER_R25_FROM_R24]
+	st.a    r12, [sp, -4]
+#else
+	PUSH	r25
+#endif
+
+.endm
+
+/*--------------------------------------------------------------
+ * Save kernel Mode callee regs at the time of Contect Switch.
+ *
+ * Special handling for r25 if used for caching Task Pointer.
+ * Kernel simply skips saving it since it will be loaded with
+ * incoming task pointer anyways
+ *-------------------------------------------------------------*/
+.macro SAVE_CALLEE_SAVED_KERNEL
+
+	SAVE_R13_TO_R24
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	sub     sp, sp, 4
+#else
+	PUSH	r25
+#endif
+.endm
+
+/*--------------------------------------------------------------
+ * Opposite of SAVE_CALLEE_SAVED_KERNEL
+ *-------------------------------------------------------------*/
+.macro RESTORE_CALLEE_SAVED_KERNEL
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	add     sp, sp, 4  /* skip usual r25 placeholder */
+#else
+	POP	r25
+#endif
+	RESTORE_R24_TO_R13
+.endm
+
+/*--------------------------------------------------------------
+ * Opposite of SAVE_CALLEE_SAVED_USER
+ *
+ * ptrace tracer or unaligned-access fixup might have changed a user mode
+ * callee reg which is saved back to usual r25 storage location
+ *-------------------------------------------------------------*/
+.macro RESTORE_CALLEE_SAVED_USER
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	ld.ab   r12, [sp, 4]
+	st.as   r12, [sp, OFF_USER_R25_FROM_R24]
+#else
+	POP	r25
+#endif
+	RESTORE_R24_TO_R13
+.endm
+
+/*--------------------------------------------------------------
+ * Super FAST Restore callee saved regs by simply re-adjusting SP
+ *-------------------------------------------------------------*/
+.macro DISCARD_CALLEE_SAVED_USER
+	add     sp, sp, SZ_CALLEE_REGS
+.endm
+
+/*-------------------------------------------------------------
+ * given a tsk struct, get to the base of it's kernel mode stack
+ * tsk->thread_info is really a PAGE, whose bottom hoists stack
+ * which grows upwards towards thread_info
+ *------------------------------------------------------------*/
+
+.macro GET_TSK_STACK_BASE tsk, out
+
+	/* Get task->thread_info (this is essentially start of a PAGE) */
+	ld  \out, [\tsk, TASK_THREAD_INFO]
+
+	/* Go to end of page where stack begins (grows upwards) */
+	add2 \out, \out, (THREAD_SIZE)/4
+
+.endm
+
+/*--------------------------------------------------------------
+ * Switch to Kernel Mode stack if SP points to User Mode stack
+ *
+ * Entry   : r9 contains pre-IRQ/exception/trap status32
+ * Exit    : SP is set to kernel mode stack pointer
+ *           If CURR_IN_REG, r25 set to "current" task pointer
+ * Clobbers: r9
+ *-------------------------------------------------------------*/
+
+.macro SWITCH_TO_KERNEL_STK
+
+	/* User Mode when this happened ? Yes: Proceed to switch stack */
+	bbit1   r9, STATUS_U_BIT, 88f
+
+	/* OK we were already in kernel mode when this event happened, thus can
+	 * assume SP is kernel mode SP. _NO_ need to do any stack switching
+	 */
+
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
+	/* However....
+	 * If Level 2 Interrupts enabled, we may end up with a corner case:
+	 * 1. User Task executing
+	 * 2. L1 IRQ taken, ISR starts (CPU auto-switched to KERNEL mode)
+	 * 3. But before it could switch SP from USER to KERNEL stack
+	 *      a L2 IRQ "Interrupts" L1
+	 * Thay way although L2 IRQ happened in Kernel mode, stack is still
+	 * not switched.
+	 * To handle this, we may need to switch stack even if in kernel mode
+	 * provided SP has values in range of USER mode stack ( < 0x7000_0000 )
+	 */
+	brlo sp, VMALLOC_START, 88f
+
+	/* TODO: vineetg:
+	 * We need to be a bit more cautious here. What if a kernel bug in
+	 * L1 ISR, caused SP to go whaco (some small value which looks like
+	 * USER stk) and then we take L2 ISR.
+	 * Above brlo alone would treat it as a valid L1-L2 sceanrio
+	 * instead of shouting alound
+	 * The only feasible way is to make sure this L2 happened in
+	 * L1 prelogue ONLY i.e. ilink2 is less than a pre-set marker in
+	 * L1 ISR before it switches stack
+	 */
+
+#endif
+
+	/* Save Pre Intr/Exception KERNEL MODE SP on kernel stack
+	 * safe-keeping not really needed, but it keeps the epilogue code
+	 * (SP restore) simpler/uniform.
+	 */
+	b.d	66f
+	mov	r9, sp
+
+88: /*------Intr/Ecxp happened in user mode, "switch" stack ------ */
+
+	GET_CURR_TASK_ON_CPU   r9
+
+	/* With current tsk in r9, get it's kernel mode stack base */
+	GET_TSK_STACK_BASE  r9, r9
+
+66:
+#ifdef CONFIG_ARC_CURR_IN_REG
+	/*
+	 * Treat r25 as scratch reg, save it on stack first
+	 * Load it with current task pointer
+	 */
+	st	r25, [r9, -4]
+	GET_CURR_TASK_ON_CPU   r25
+#endif
+
+	/* Save Pre Intr/Exception User SP on kernel stack */
+	st.a    sp, [r9, -16]	; Make room for orig_r0, ECR, user_r25
+
+	/* CAUTION:
+	 * SP should be set at the very end when we are done with everything
+	 * In case of 2 levels of interrupt we depend on value of SP to assume
+	 * that everything else is done (loading r25 etc)
+	 */
+
+	/* set SP to point to kernel mode stack */
+	mov sp, r9
+
+	/* ----- Stack Switched to kernel Mode, Now save REG FILE ----- */
+
+.endm
+
+/*------------------------------------------------------------
+ * "FAKE" a rtie to return from CPU Exception context
+ * This is to re-enable Exceptions within exception
+ * Look at EV_ProtV to see how this is actually used
+ *-------------------------------------------------------------*/
+
+.macro FAKE_RET_FROM_EXCPN  reg
+
+	ld  \reg, [sp, PT_status32]
+	bic  \reg, \reg, (STATUS_U_MASK|STATUS_DE_MASK)
+	bset \reg, \reg, STATUS_L_BIT
+	sr  \reg, [erstatus]
+	mov \reg, 55f
+	sr  \reg, [eret]
+
+	rtie
+55:
+.endm
+
+/*
+ * @reg [OUT] &thread_info of "current"
+ */
+.macro GET_CURR_THR_INFO_FROM_SP  reg
+	bic \reg, sp, (THREAD_SIZE - 1)
+.endm
+
+/*
+ * @reg [OUT] thread_info->flags of "current"
+ */
+.macro GET_CURR_THR_INFO_FLAGS  reg
+	GET_CURR_THR_INFO_FROM_SP  \reg
+	ld  \reg, [\reg, THREAD_INFO_FLAGS]
+.endm
+
+/*--------------------------------------------------------------
+ * For early Exception Prologue, a core reg is temporarily needed to
+ * code the rest of prolog (stack switching). This is done by stashing
+ * it to memory (non-SMP case) or SCRATCH0 Aux Reg (SMP).
+ *
+ * Before saving the full regfile - this reg is restored back, only
+ * to be saved again on kernel mode stack, as part of pt_regs.
+ *-------------------------------------------------------------*/
+.macro EXCPN_PROLOG_FREEUP_REG	reg
+#ifdef CONFIG_SMP
+	sr  \reg, [ARC_REG_SCRATCH_DATA0]
+#else
+	st  \reg, [@ex_saved_reg1]
+#endif
+.endm
+
+.macro EXCPN_PROLOG_RESTORE_REG	reg
+#ifdef CONFIG_SMP
+	lr  \reg, [ARC_REG_SCRATCH_DATA0]
+#else
+	ld  \reg, [@ex_saved_reg1]
+#endif
+.endm
+
+/*--------------------------------------------------------------
+ * Exception Entry prologue
+ * -Switches stack to K mode (if not already)
+ * -Saves the register file
+ *
+ * After this it is safe to call the "C" handlers
+ *-------------------------------------------------------------*/
+.macro EXCEPTION_PROLOGUE
+
+	/* Need at least 1 reg to code the early exception prologue */
+	EXCPN_PROLOG_FREEUP_REG r9
+
+	/* U/K mode at time of exception (stack not switched if already K) */
+	lr  r9, [erstatus]
+
+	/* ARC700 doesn't provide auto-stack switching */
+	SWITCH_TO_KERNEL_STK
+
+	/* save the regfile */
+	SAVE_ALL_SYS
+.endm
+
+/*--------------------------------------------------------------
+ * Save all registers used by Exceptions (TLB Miss, Prot-V, Mem err etc)
+ * Requires SP to be already switched to kernel mode Stack
+ * sp points to the next free element on the stack at exit of this macro.
+ * Registers are pushed / popped in the order defined in struct ptregs
+ * in asm/ptrace.h
+ * Note that syscalls are implemented via TRAP which is also a exception
+ * from CPU's point of view
+ *-------------------------------------------------------------*/
+.macro SAVE_ALL_SYS
+
+	lr	r9, [ecr]
+	st      r9, [sp, 8]    /* ECR */
+	st      r0, [sp, 4]    /* orig_r0, needed only for sys calls */
+
+	/* Restore r9 used to code the early prologue */
+	EXCPN_PROLOG_RESTORE_REG  r9
+
+	SAVE_R0_TO_R12
+	PUSH	gp
+	PUSH	fp
+	PUSH	blink
+	PUSHAX	eret
+	PUSHAX	erstatus
+	PUSH	lp_count
+	PUSHAX	lp_end
+	PUSHAX	lp_start
+	PUSHAX	erbta
+.endm
+
+/*--------------------------------------------------------------
+ * Restore all registers used by system call or Exceptions
+ * SP should always be pointing to the next free stack element
+ * when entering this macro.
+ *
+ * NOTE:
+ *
+ * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
+ * for memory load operations. If used in that way interrupts are deffered
+ * by hardware and that is not good.
+ *-------------------------------------------------------------*/
+.macro RESTORE_ALL_SYS
+	POPAX	erbta
+	POPAX	lp_start
+	POPAX	lp_end
+
+	POP	r9
+	mov	lp_count, r9	;LD to lp_count is not allowed
+
+	POPAX	erstatus
+	POPAX	eret
+	POP	blink
+	POP	fp
+	POP	gp
+	RESTORE_R12_TO_R0
+
+	ld  sp, [sp] /* restore original sp */
+	/* orig_r0, ECR, user_r25 skipped automatically */
+.endm
+
+
+/*--------------------------------------------------------------
+ * Save all registers used by interrupt handlers.
+ *-------------------------------------------------------------*/
+.macro SAVE_ALL_INT1
+
+	/* restore original r9 to be saved as part of reg-file */
+#ifdef CONFIG_SMP
+	lr  r9, [ARC_REG_SCRATCH_DATA0]
+#else
+	ld  r9, [@int1_saved_reg]
+#endif
+
+	/* now we are ready to save the remaining context :) */
+	st      event_IRQ1, [sp, 8]    /* Dummy ECR */
+	st      0, [sp, 4]    /* orig_r0 , N/A for IRQ */
+
+	SAVE_R0_TO_R12
+	PUSH	gp
+	PUSH	fp
+	PUSH	blink
+	PUSH	ilink1
+	PUSHAX	status32_l1
+	PUSH	lp_count
+	PUSHAX	lp_end
+	PUSHAX	lp_start
+	PUSHAX	bta_l1
+.endm
+
+.macro SAVE_ALL_INT2
+
+	/* TODO-vineetg: SMP we can't use global nor can we use
+	*   SCRATCH0 as we do for int1 because while int1 is using
+	*   it, int2 can come
+	*/
+	/* retsore original r9 , saved in sys_saved_r9 */
+	ld  r9, [@int2_saved_reg]
+
+	/* now we are ready to save the remaining context :) */
+	st      event_IRQ2, [sp, 8]    /* Dummy ECR */
+	st      0, [sp, 4]    /* orig_r0 , N/A for IRQ */
+
+	SAVE_R0_TO_R12
+	PUSH	gp
+	PUSH	fp
+	PUSH	blink
+	PUSH	ilink2
+	PUSHAX	status32_l2
+	PUSH	lp_count
+	PUSHAX	lp_end
+	PUSHAX	lp_start
+	PUSHAX	bta_l2
+.endm
+
+/*--------------------------------------------------------------
+ * Restore all registers used by interrupt handlers.
+ *
+ * NOTE:
+ *
+ * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
+ * for memory load operations. If used in that way interrupts are deffered
+ * by hardware and that is not good.
+ *-------------------------------------------------------------*/
+
+.macro RESTORE_ALL_INT1
+	POPAX	bta_l1
+	POPAX	lp_start
+	POPAX	lp_end
+
+	POP	r9
+	mov	lp_count, r9	;LD to lp_count is not allowed
+
+	POPAX	status32_l1
+	POP	ilink1
+	POP	blink
+	POP	fp
+	POP	gp
+	RESTORE_R12_TO_R0
+
+	ld  sp, [sp] /* restore original sp */
+	/* orig_r0, ECR, user_r25 skipped automatically */
+.endm
+
+.macro RESTORE_ALL_INT2
+	POPAX	bta_l2
+	POPAX	lp_start
+	POPAX	lp_end
+
+	POP	r9
+	mov	lp_count, r9	;LD to lp_count is not allowed
+
+	POPAX	status32_l2
+	POP	ilink2
+	POP	blink
+	POP	fp
+	POP	gp
+	RESTORE_R12_TO_R0
+
+	ld  sp, [sp] /* restore original sp */
+	/* orig_r0, ECR, user_r25 skipped automatically */
+.endm
+
+
+/* Get CPU-ID of this core */
+.macro  GET_CPU_ID  reg
+	lr  \reg, [identity]
+	lsr \reg, \reg, 8
+	bmsk \reg, \reg, 7
+.endm
+
+#ifdef CONFIG_SMP
+
+/*-------------------------------------------------
+ * Retrieve the current running task on this CPU
+ * 1. Determine curr CPU id.
+ * 2. Use it to index into _current_task[ ]
+ */
+.macro  GET_CURR_TASK_ON_CPU   reg
+	GET_CPU_ID  \reg
+	ld.as  \reg, [@_current_task, \reg]
+.endm
+
+/*-------------------------------------------------
+ * Save a new task as the "current" task on this CPU
+ * 1. Determine curr CPU id.
+ * 2. Use it to index into _current_task[ ]
+ *
+ * Coded differently than GET_CURR_TASK_ON_CPU (which uses LD.AS)
+ * because ST r0, [r1, offset] can ONLY have s9 @offset
+ * while   LD can take s9 (4 byte insn) or LIMM (8 byte insn)
+ */
+
+.macro  SET_CURR_TASK_ON_CPU    tsk, tmp
+	GET_CPU_ID  \tmp
+	add2 \tmp, @_current_task, \tmp
+	st   \tsk, [\tmp]
+#ifdef CONFIG_ARC_CURR_IN_REG
+	mov r25, \tsk
+#endif
+
+.endm
+
+
+#else   /* Uniprocessor implementation of macros */
+
+.macro  GET_CURR_TASK_ON_CPU    reg
+	ld  \reg, [@_current_task]
+.endm
+
+.macro  SET_CURR_TASK_ON_CPU    tsk, tmp
+	st  \tsk, [@_current_task]
+#ifdef CONFIG_ARC_CURR_IN_REG
+	mov r25, \tsk
+#endif
+.endm
+
+#endif /* SMP / UNI */
+
+/* ------------------------------------------------------------------
+ * Get the ptr to some field of Current Task at @off in task struct
+ *  -Uses r25 for Current task ptr if that is enabled
+ */
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+
+.macro GET_CURR_TASK_FIELD_PTR  off,  reg
+	add \reg, r25, \off
+.endm
+
+#else
+
+.macro GET_CURR_TASK_FIELD_PTR  off,  reg
+	GET_CURR_TASK_ON_CPU  \reg
+	add \reg, \reg, \off
+.endm
+
+#endif	/* CONFIG_ARC_CURR_IN_REG */
+
+#endif  /* __ASSEMBLY__ */
+
+#endif  /* __ASM_ARC_ENTRY_H */
diff --git a/arch/arc/include/asm/exec.h b/arch/arc/include/asm/exec.h
new file mode 100644
index 00000000000..28abc6905e0
--- /dev/null
+++ b/arch/arc/include/asm/exec.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARC_EXEC_H
+#define __ASM_ARC_EXEC_H
+
+/* Align to 16b */
+#define arch_align_stack(p) ((unsigned long)(p) & ~0xf)
+
+#endif
diff --git a/arch/arc/include/asm/futex.h b/arch/arc/include/asm/futex.h
new file mode 100644
index 00000000000..4dc64ddebec
--- /dev/null
+++ b/arch/arc/include/asm/futex.h
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Vineetg: August 2010: From Android kernel work
+ */
+
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <linux/futex.h>
+#include <linux/preempt.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
+							\
+	__asm__ __volatile__(				\
+	"1:	ld  %1, [%2]			\n"	\
+		insn				"\n"	\
+	"2:	st  %0, [%2]			\n"	\
+	"	mov %0, 0			\n"	\
+	"3:					\n"	\
+	"	.section .fixup,\"ax\"		\n"	\
+	"	.align  4			\n"	\
+	"4:	mov %0, %4			\n"	\
+	"	b   3b				\n"	\
+	"	.previous			\n"	\
+	"	.section __ex_table,\"a\"	\n"	\
+	"	.align  4			\n"	\
+	"	.word   1b, 4b			\n"	\
+	"	.word   2b, 4b			\n"	\
+	"	.previous			\n"	\
+							\
+	: "=&r" (ret), "=&r" (oldval)			\
+	: "r" (uaddr), "r" (oparg), "ir" (-EFAULT)	\
+	: "cc", "memory")
+
+static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();	/* implies preempt_disable() */
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op("or  %0, %1, %3", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op("bic %0, %1, %3", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op("xor %0, %1, %3", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();	/* subsumes preempt_enable() */
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ:
+			ret = (oldval == cmparg);
+			break;
+		case FUTEX_OP_CMP_NE:
+			ret = (oldval != cmparg);
+			break;
+		case FUTEX_OP_CMP_LT:
+			ret = (oldval < cmparg);
+			break;
+		case FUTEX_OP_CMP_GE:
+			ret = (oldval >= cmparg);
+			break;
+		case FUTEX_OP_CMP_LE:
+			ret = (oldval <= cmparg);
+			break;
+		case FUTEX_OP_CMP_GT:
+			ret = (oldval > cmparg);
+			break;
+		default:
+			ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+/* Compare-xchg with preemption disabled.
+ *  Notes:
+ *      -Best-Effort: Exchg happens only if compare succeeds.
+ *          If compare fails, returns; leaving retry/looping to upper layers
+ *      -successful cmp-xchg: return orig value in @addr (same as cmp val)
+ *      -Compare fails: return orig value in @addr
+ *      -user access r/w fails: return -EFAULT
+ */
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval,
+					u32 newval)
+{
+	u32 val;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();	/* implies preempt_disable() */
+
+	/* TBD : can use llock/scond */
+	__asm__ __volatile__(
+	"1:	ld    %0, [%3]	\n"
+	"	brne  %0, %1, 3f	\n"
+	"2:	st    %2, [%3]	\n"
+	"3:	\n"
+	"	.section .fixup,\"ax\"	\n"
+	"4:	mov %0, %4	\n"
+	"	b   3b	\n"
+	"	.previous	\n"
+	"	.section __ex_table,\"a\"	\n"
+	"	.align  4	\n"
+	"	.word   1b, 4b	\n"
+	"	.word   2b, 4b	\n"
+	"	.previous\n"
+	: "=&r"(val)
+	: "r"(oldval), "r"(newval), "r"(uaddr), "ir"(-EFAULT)
+	: "cc", "memory");
+
+	pagefault_enable();	/* subsumes preempt_enable() */
+
+	*uval = val;
+	return val;
+}
+
+#endif
diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
new file mode 100644
index 00000000000..334ce7017a1
--- /dev/null
+++ b/arch/arc/include/asm/io.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_IO_H
+#define _ASM_ARC_IO_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <asm/page.h>
+
+#define PCI_IOBASE ((void __iomem *)0)
+
+extern void __iomem *ioremap(unsigned long physaddr, unsigned long size);
+extern void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
+				  unsigned long flags);
+extern void iounmap(const void __iomem *addr);
+
+#define ioremap_nocache(phy, sz)	ioremap(phy, sz)
+#define ioremap_wc(phy, sz)		ioremap(phy, sz)
+
+/* Change struct page to physical address */
+#define page_to_phys(page)		(page_to_pfn(page) << PAGE_SHIFT)
+
+#define __raw_readb __raw_readb
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	u8 b;
+
+	__asm__ __volatile__(
+	"	ldb%U1 %0, %1	\n"
+	: "=r" (b)
+	: "m" (*(volatile u8 __force *)addr)
+	: "memory");
+
+	return b;
+}
+
+#define __raw_readw __raw_readw
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	u16 s;
+
+	__asm__ __volatile__(
+	"	ldw%U1 %0, %1	\n"
+	: "=r" (s)
+	: "m" (*(volatile u16 __force *)addr)
+	: "memory");
+
+	return s;
+}
+
+#define __raw_readl __raw_readl
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	u32 w;
+
+	__asm__ __volatile__(
+	"	ld%U1 %0, %1	\n"
+	: "=r" (w)
+	: "m" (*(volatile u32 __force *)addr)
+	: "memory");
+
+	return w;
+}
+
+#define __raw_writeb __raw_writeb
+static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
+{
+	__asm__ __volatile__(
+	"	stb%U1 %0, %1	\n"
+	:
+	: "r" (b), "m" (*(volatile u8 __force *)addr)
+	: "memory");
+}
+
+#define __raw_writew __raw_writew
+static inline void __raw_writew(u16 s, volatile void __iomem *addr)
+{
+	__asm__ __volatile__(
+	"	stw%U1 %0, %1	\n"
+	:
+	: "r" (s), "m" (*(volatile u16 __force *)addr)
+	: "memory");
+
+}
+
+#define __raw_writel __raw_writel
+static inline void __raw_writel(u32 w, volatile void __iomem *addr)
+{
+	__asm__ __volatile__(
+	"	st%U1 %0, %1	\n"
+	:
+	: "r" (w), "m" (*(volatile u32 __force *)addr)
+	: "memory");
+
+}
+
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+
+#include <asm-generic/io.h>
+
+#endif /* _ASM_ARC_IO_H */
diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h
new file mode 100644
index 00000000000..fb4efb64897
--- /dev/null
+++ b/arch/arc/include/asm/irq.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARC_IRQ_H
+#define __ASM_ARC_IRQ_H
+
+#define NR_CPU_IRQS	32  /* number of interrupt lines of ARC770 CPU */
+#define NR_IRQS		128 /* allow some CPU external IRQ handling */
+
+/* Platform Independent IRQs */
+#define TIMER0_IRQ      3
+#define TIMER1_IRQ      4
+
+#include <asm-generic/irq.h>
+
+extern void arc_init_IRQ(void);
+void arc_local_timer_setup(void);
+
+#endif
diff --git a/arch/arc/include/asm/irqflags.h b/arch/arc/include/asm/irqflags.h
new file mode 100644
index 00000000000..cb7efc29f16
--- /dev/null
+++ b/arch/arc/include/asm/irqflags.h
@@ -0,0 +1,192 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARC_IRQFLAGS_H
+#define __ASM_ARC_IRQFLAGS_H
+
+/* vineetg: March 2010 : local_irq_save( ) optimisation
+ *  -Remove explicit mov of current status32 into reg, that is not needed
+ *  -Use BIC  insn instead of INVERTED + AND
+ *  -Conditionally disable interrupts (if they are not enabled, don't disable)
+*/
+
+#ifdef __KERNEL__
+
+#include <asm/arcregs.h>
+
+/* status32 Reg bits related to Interrupt Handling */
+#define STATUS_E1_BIT		1	/* Int 1 enable */
+#define STATUS_E2_BIT		2	/* Int 2 enable */
+#define STATUS_A1_BIT		3	/* Int 1 active */
+#define STATUS_A2_BIT		4	/* Int 2 active */
+
+#define STATUS_E1_MASK		(1<<STATUS_E1_BIT)
+#define STATUS_E2_MASK		(1<<STATUS_E2_BIT)
+#define STATUS_A1_MASK		(1<<STATUS_A1_BIT)
+#define STATUS_A2_MASK		(1<<STATUS_A2_BIT)
+
+/* Other Interrupt Handling related Aux regs */
+#define AUX_IRQ_LEV		0x200	/* IRQ Priority: L1 or L2 */
+#define AUX_IRQ_HINT		0x201	/* For generating Soft Interrupts */
+#define AUX_IRQ_LV12		0x43	/* interrupt level register */
+
+#define AUX_IENABLE		0x40c
+#define AUX_ITRIGGER		0x40d
+#define AUX_IPULSE		0x415
+
+#ifndef __ASSEMBLY__
+
+/******************************************************************
+ * IRQ Control Macros
+ ******************************************************************/
+
+/*
+ * Save IRQ state and disable IRQs
+ */
+static inline long arch_local_irq_save(void)
+{
+	unsigned long temp, flags;
+
+	__asm__ __volatile__(
+	"	lr  %1, [status32]	\n"
+	"	bic %0, %1, %2		\n"
+	"	and.f 0, %1, %2	\n"
+	"	flag.nz %0		\n"
+	: "=r"(temp), "=r"(flags)
+	: "n"((STATUS_E1_MASK | STATUS_E2_MASK))
+	: "memory", "cc");
+
+	return flags;
+}
+
+/*
+ * restore saved IRQ state
+ */
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+
+	__asm__ __volatile__(
+	"	flag %0			\n"
+	:
+	: "r"(flags)
+	: "memory");
+}
+
+/*
+ * Unconditionally Enable IRQs
+ */
+extern void arch_local_irq_enable(void);
+
+/*
+ * Unconditionally Disable IRQs
+ */
+static inline void arch_local_irq_disable(void)
+{
+	unsigned long temp;
+
+	__asm__ __volatile__(
+	"	lr  %0, [status32]	\n"
+	"	and %0, %0, %1		\n"
+	"	flag %0			\n"
+	: "=&r"(temp)
+	: "n"(~(STATUS_E1_MASK | STATUS_E2_MASK))
+	: "memory");
+}
+
+/*
+ * save IRQ state
+ */
+static inline long arch_local_save_flags(void)
+{
+	unsigned long temp;
+
+	__asm__ __volatile__(
+	"	lr  %0, [status32]	\n"
+	: "=&r"(temp)
+	:
+	: "memory");
+
+	return temp;
+}
+
+/*
+ * Query IRQ state
+ */
+static inline int arch_irqs_disabled_flags(unsigned long flags)
+{
+	return !(flags & (STATUS_E1_MASK
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
+			| STATUS_E2_MASK
+#endif
+		));
+}
+
+static inline int arch_irqs_disabled(void)
+{
+	return arch_irqs_disabled_flags(arch_local_save_flags());
+}
+
+static inline void arch_mask_irq(unsigned int irq)
+{
+	unsigned int ienb;
+
+	ienb = read_aux_reg(AUX_IENABLE);
+	ienb &= ~(1 << irq);
+	write_aux_reg(AUX_IENABLE, ienb);
+}
+
+static inline void arch_unmask_irq(unsigned int irq)
+{
+	unsigned int ienb;
+
+	ienb = read_aux_reg(AUX_IENABLE);
+	ienb |= (1 << irq);
+	write_aux_reg(AUX_IENABLE, ienb);
+}
+
+#else
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+
+.macro TRACE_ASM_IRQ_DISABLE
+	bl	trace_hardirqs_off
+.endm
+
+.macro TRACE_ASM_IRQ_ENABLE
+	bl	trace_hardirqs_on
+.endm
+
+#else
+
+.macro TRACE_ASM_IRQ_DISABLE
+.endm
+
+.macro TRACE_ASM_IRQ_ENABLE
+.endm
+
+#endif
+
+.macro IRQ_DISABLE  scratch
+	lr	\scratch, [status32]
+	bic	\scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK)
+	flag	\scratch
+	TRACE_ASM_IRQ_DISABLE
+.endm
+
+.macro IRQ_ENABLE  scratch
+	lr	\scratch, [status32]
+	or	\scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK)
+	flag	\scratch
+	TRACE_ASM_IRQ_ENABLE
+.endm
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* KERNEL */
+
+#endif
diff --git a/arch/arc/include/asm/kdebug.h b/arch/arc/include/asm/kdebug.h
new file mode 100644
index 00000000000..3fbe6c472c0
--- /dev/null
+++ b/arch/arc/include/asm/kdebug.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_KDEBUG_H
+#define _ASM_ARC_KDEBUG_H
+
+enum die_val {
+	DIE_UNUSED,
+	DIE_TRAP,
+	DIE_IERR,
+	DIE_OOPS
+};
+
+#endif
diff --git a/arch/arc/include/asm/kgdb.h b/arch/arc/include/asm/kgdb.h
new file mode 100644
index 00000000000..b65fca7ffeb
--- /dev/null
+++ b/arch/arc/include/asm/kgdb.h
@@ -0,0 +1,59 @@
+/*
+ * kgdb support for ARC
+ *
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARC_KGDB_H__
+#define __ARC_KGDB_H__
+
+#ifdef CONFIG_KGDB
+
+#include <asm/ptrace.h>
+
+/* to ensure compatibility with Linux 2.6.35, we don't implement the get/set
+ * register API yet */
+#undef DBG_MAX_REG_NUM
+
+#define GDB_MAX_REGS		39
+
+#define BREAK_INSTR_SIZE	2
+#define CACHE_FLUSH_IS_SAFE	1
+#define NUMREGBYTES		(GDB_MAX_REGS * 4)
+#define BUFMAX			2048
+
+static inline void arch_kgdb_breakpoint(void)
+{
+	__asm__ __volatile__ ("trap_s	0x4\n");
+}
+
+extern void kgdb_trap(struct pt_regs *regs);
+
+enum arc700_linux_regnums {
+	_R0		= 0,
+	_R1, _R2, _R3, _R4, _R5, _R6, _R7, _R8, _R9, _R10, _R11, _R12, _R13,
+	_R14, _R15, _R16, _R17, _R18, _R19, _R20, _R21, _R22, _R23, _R24,
+	_R25, _R26,
+	_BTA		= 27,
+	_LP_START	= 28,
+	_LP_END		= 29,
+	_LP_COUNT	= 30,
+	_STATUS32	= 31,
+	_BLINK		= 32,
+	_FP		= 33,
+	__SP		= 34,
+	_EFA		= 35,
+	_RET		= 36,
+	_ORIG_R8	= 37,
+	_STOP_PC	= 38
+};
+
+#else
+#define kgdb_trap(regs)
+#endif
+
+#endif	/* __ARC_KGDB_H__ */
diff --git a/arch/arc/include/asm/kprobes.h b/arch/arc/include/asm/kprobes.h
new file mode 100644
index 00000000000..944dbedb38b
--- /dev/null
+++ b/arch/arc/include/asm/kprobes.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ARC_KPROBES_H
+#define _ARC_KPROBES_H
+
+#ifdef CONFIG_KPROBES
+
+typedef u16 kprobe_opcode_t;
+
+#define UNIMP_S_INSTRUCTION 0x79e0
+#define TRAP_S_2_INSTRUCTION 0x785e
+
+#define MAX_INSN_SIZE   8
+#define MAX_STACK_SIZE  64
+
+struct arch_specific_insn {
+	int is_short;
+	kprobe_opcode_t *t1_addr, *t2_addr;
+	kprobe_opcode_t t1_opcode, t2_opcode;
+};
+
+#define flush_insn_slot(p)  do {  } while (0)
+
+#define kretprobe_blacklist_size    0
+
+struct kprobe;
+
+void arch_remove_kprobe(struct kprobe *p);
+
+int kprobe_exceptions_notify(struct notifier_block *self,
+			     unsigned long val, void *data);
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+};
+
+struct kprobe_ctlblk {
+	unsigned int kprobe_status;
+	struct pt_regs jprobe_saved_regs;
+	char jprobes_stack[MAX_STACK_SIZE];
+	struct prev_kprobe prev_kprobe;
+};
+
+int kprobe_fault_handler(struct pt_regs *regs, unsigned long cause);
+void kretprobe_trampoline(void);
+void trap_is_kprobe(unsigned long address, struct pt_regs *regs);
+#else
+static void trap_is_kprobe(unsigned long address, struct pt_regs *regs)
+{
+}
+#endif
+
+#endif
diff --git a/arch/arc/include/asm/linkage.h b/arch/arc/include/asm/linkage.h
new file mode 100644
index 00000000000..5faad17118b
--- /dev/null
+++ b/arch/arc/include/asm/linkage.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#ifdef __ASSEMBLY__
+
+#define ASM_NL		 `	/* use '`' to mark new line in macro */
+
+/* annotation for data we want in DCCM - if enabled in .config */
+.macro ARCFP_DATA nm
+#ifdef CONFIG_ARC_HAS_DCCM
+	.section .data.arcfp
+#else
+	.section .data
+#endif
+	.global \nm
+.endm
+
+/* annotation for data we want in DCCM - if enabled in .config */
+.macro ARCFP_CODE
+#ifdef CONFIG_ARC_HAS_ICCM
+	.section .text.arcfp, "ax",@progbits
+#else
+	.section .text, "ax",@progbits
+#endif
+.endm
+
+#else	/* !__ASSEMBLY__ */
+
+#ifdef CONFIG_ARC_HAS_ICCM
+#define __arcfp_code __attribute__((__section__(".text.arcfp")))
+#else
+#define __arcfp_code __attribute__((__section__(".text")))
+#endif
+
+#ifdef CONFIG_ARC_HAS_DCCM
+#define __arcfp_data __attribute__((__section__(".data.arcfp")))
+#else
+#define __arcfp_data __attribute__((__section__(".data")))
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/mach_desc.h b/arch/arc/include/asm/mach_desc.h
new file mode 100644
index 00000000000..e8993a2be6c
--- /dev/null
+++ b/arch/arc/include/asm/mach_desc.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * based on METAG mach/arch.h (which in turn was based on ARM)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_MACH_DESC_H_
+#define _ASM_ARC_MACH_DESC_H_
+
+/**
+ * struct machine_desc - Board specific callbacks, called from ARC common code
+ *	Provided by each ARC board using MACHINE_START()/MACHINE_END(), so
+ *	a multi-platform kernel builds with array of such descriptors.
+ *	We extend the early DT scan to also match the DT's "compatible" string
+ *	against the @dt_compat of all such descriptors, and one with highest
+ *	"DT score" is selected as global @machine_desc.
+ *
+ * @name:		Board/SoC name
+ * @dt_compat:		Array of device tree 'compatible' strings
+ * 			(XXX: although only 1st entry is looked at)
+ * @init_early:		Very early callback [called from setup_arch()]
+ * @init_irq:		setup external IRQ controllers [called from init_IRQ()]
+ * @init_smp:		for each CPU (e.g. setup IPI)
+ * 			[(M):init_IRQ(), (o):start_kernel_secondary()]
+ * @init_time:		platform specific clocksource/clockevent registration
+ * 			[called from time_init()]
+ * @init_machine:	arch initcall level callback (e.g. populate static
+ * 			platform devices or parse Devicetree)
+ * @init_late:		Late initcall level callback
+ *
+ */
+struct machine_desc {
+	const char		*name;
+	const char		**dt_compat;
+
+	void			(*init_early)(void);
+	void			(*init_irq)(void);
+#ifdef CONFIG_SMP
+	void			(*init_smp)(unsigned int);
+#endif
+	void			(*init_time)(void);
+	void			(*init_machine)(void);
+	void			(*init_late)(void);
+
+};
+
+/*
+ * Current machine - only accessible during boot.
+ */
+extern const struct machine_desc *machine_desc;
+
+/*
+ * Machine type table - also only accessible during boot
+ */
+extern const struct machine_desc __arch_info_begin[], __arch_info_end[];
+
+/*
+ * Set of macros to define architecture features.
+ * This is built into a table by the linker.
+ */
+#define MACHINE_START(_type, _name)			\
+static const struct machine_desc __mach_desc_##_type	\
+__used							\
+__attribute__((__section__(".arch.info.init"))) = {	\
+	.name		= _name,
+
+#define MACHINE_END				\
+};
+
+extern const struct machine_desc *setup_machine_fdt(void *dt);
+
+#endif
diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h
new file mode 100644
index 00000000000..8c84ae98c33
--- /dev/null
+++ b/arch/arc/include/asm/mmu.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_MMU_H
+#define _ASM_ARC_MMU_H
+
+#if defined(CONFIG_ARC_MMU_V1)
+#define CONFIG_ARC_MMU_VER 1
+#elif defined(CONFIG_ARC_MMU_V2)
+#define CONFIG_ARC_MMU_VER 2
+#elif defined(CONFIG_ARC_MMU_V3)
+#define CONFIG_ARC_MMU_VER 3
+#endif
+
+/* MMU Management regs */
+#define ARC_REG_MMU_BCR		0x06f
+#define ARC_REG_TLBPD0		0x405
+#define ARC_REG_TLBPD1		0x406
+#define ARC_REG_TLBINDEX	0x407
+#define ARC_REG_TLBCOMMAND	0x408
+#define ARC_REG_PID		0x409
+#define ARC_REG_SCRATCH_DATA0	0x418
+
+/* Bits in MMU PID register */
+#define MMU_ENABLE		(1 << 31)	/* Enable MMU for process */
+
+/* Error code if probe fails */
+#define TLB_LKUP_ERR		0x80000000
+
+#define TLB_DUP_ERR	(TLB_LKUP_ERR | 0x00000001)
+
+/* TLB Commands */
+#define TLBWrite    0x1
+#define TLBRead     0x2
+#define TLBGetIndex 0x3
+#define TLBProbe    0x4
+
+#if (CONFIG_ARC_MMU_VER >= 2)
+#define TLBWriteNI  0x5		/* write JTLB without inv uTLBs */
+#define TLBIVUTLB   0x6		/* explicitly inv uTLBs */
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long asid[NR_CPUS];	/* 8 bit MMU PID + Generation cycle */
+} mm_context_t;
+
+#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
+void tlb_paranoid_check(unsigned int mm_asid, unsigned long address);
+#else
+#define tlb_paranoid_check(a, b)
+#endif
+
+void arc_mmu_init(void);
+extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
+void read_decode_mmu_bcr(void);
+
+#endif	/* !__ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h
new file mode 100644
index 00000000000..1fd467ef658
--- /dev/null
+++ b/arch/arc/include/asm/mmu_context.h
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * vineetg: May 2011
+ *  -Refactored get_new_mmu_context( ) to only handle live-mm.
+ *   retiring-mm handled in other hooks
+ *
+ * Vineetg: March 25th, 2008: Bug #92690
+ *  -Major rewrite of Core ASID allocation routine get_new_mmu_context
+ *
+ * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
+ */
+
+#ifndef _ASM_ARC_MMU_CONTEXT_H
+#define _ASM_ARC_MMU_CONTEXT_H
+
+#include <asm/arcregs.h>
+#include <asm/tlb.h>
+
+#include <asm-generic/mm_hooks.h>
+
+/*		ARC700 ASID Management
+ *
+ * ARC MMU provides 8-bit ASID (0..255) to TAG TLB entries, allowing entries
+ * with same vaddr (different tasks) to co-exit. This provides for
+ * "Fast Context Switch" i.e. no TLB flush on ctxt-switch
+ *
+ * Linux assigns each task a unique ASID. A simple round-robin allocation
+ * of H/w ASID is done using software tracker @asid_cpu.
+ * When it reaches max 255, the allocation cycle starts afresh by flushing
+ * the entire TLB and wrapping ASID back to zero.
+ *
+ * A new allocation cycle, post rollover, could potentially reassign an ASID
+ * to a different task. Thus the rule is to refresh the ASID in a new cycle.
+ * The 32 bit @asid_cpu (and mm->asid) have 8 bits MMU PID and rest 24 bits
+ * serve as cycle/generation indicator and natural 32 bit unsigned math
+ * automagically increments the generation when lower 8 bits rollover.
+ */
+
+#define MM_CTXT_ASID_MASK	0x000000ff /* MMU PID reg :8 bit PID */
+#define MM_CTXT_CYCLE_MASK	(~MM_CTXT_ASID_MASK)
+
+#define MM_CTXT_FIRST_CYCLE	(MM_CTXT_ASID_MASK + 1)
+#define MM_CTXT_NO_ASID		0UL
+
+#define asid_mm(mm, cpu)	mm->context.asid[cpu]
+#define hw_pid(mm, cpu)		(asid_mm(mm, cpu) & MM_CTXT_ASID_MASK)
+
+DECLARE_PER_CPU(unsigned int, asid_cache);
+#define asid_cpu(cpu)		per_cpu(asid_cache, cpu)
+
+/*
+ * Get a new ASID if task doesn't have a valid one (unalloc or from prev cycle)
+ * Also set the MMU PID register to existing/updated ASID
+ */
+static inline void get_new_mmu_context(struct mm_struct *mm)
+{
+	const unsigned int cpu = smp_processor_id();
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	/*
+	 * Move to new ASID if it was not from current alloc-cycle/generation.
+	 * This is done by ensuring that the generation bits in both mm->ASID
+	 * and cpu's ASID counter are exactly same.
+	 *
+	 * Note: Callers needing new ASID unconditionally, independent of
+	 * 	 generation, e.g. local_flush_tlb_mm() for forking  parent,
+	 * 	 first need to destroy the context, setting it to invalid
+	 * 	 value.
+	 */
+	if (!((asid_mm(mm, cpu) ^ asid_cpu(cpu)) & MM_CTXT_CYCLE_MASK))
+		goto set_hw;
+
+	/* move to new ASID and handle rollover */
+	if (unlikely(!(++asid_cpu(cpu) & MM_CTXT_ASID_MASK))) {
+
+		local_flush_tlb_all();
+
+		/*
+		 * Above checke for rollover of 8 bit ASID in 32 bit container.
+		 * If the container itself wrapped around, set it to a non zero
+		 * "generation" to distinguish from no context
+		 */
+		if (!asid_cpu(cpu))
+			asid_cpu(cpu) = MM_CTXT_FIRST_CYCLE;
+	}
+
+	/* Assign new ASID to tsk */
+	asid_mm(mm, cpu) = asid_cpu(cpu);
+
+set_hw:
+	write_aux_reg(ARC_REG_PID, hw_pid(mm, cpu) | MMU_ENABLE);
+
+	local_irq_restore(flags);
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	int i;
+
+	for_each_possible_cpu(i)
+		asid_mm(mm, i) = MM_CTXT_NO_ASID;
+
+	return 0;
+}
+
+static inline void destroy_context(struct mm_struct *mm)
+{
+	unsigned long flags;
+
+	/* Needed to elide CONFIG_DEBUG_PREEMPT warning */
+	local_irq_save(flags);
+	asid_mm(mm, smp_processor_id()) = MM_CTXT_NO_ASID;
+	local_irq_restore(flags);
+}
+
+/* Prepare the MMU for task: setup PID reg with allocated ASID
+    If task doesn't have an ASID (never alloc or stolen, get a new ASID)
+*/
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	const int cpu = smp_processor_id();
+
+	/*
+	 * Note that the mm_cpumask is "aggregating" only, we don't clear it
+	 * for the switched-out task, unlike some other arches.
+	 * It is used to enlist cpus for sending TLB flush IPIs and not sending
+	 * it to CPUs where a task once ran-on, could cause stale TLB entry
+	 * re-use, specially for a multi-threaded task.
+	 * e.g. T1 runs on C1, migrates to C3. T2 running on C2 munmaps.
+	 *      For a non-aggregating mm_cpumask, IPI not sent C1, and if T1
+	 *      were to re-migrate to C1, it could access the unmapped region
+	 *      via any existing stale TLB entries.
+	 */
+	cpumask_set_cpu(cpu, mm_cpumask(next));
+
+#ifndef CONFIG_SMP
+	/* PGD cached in MMU reg to avoid 3 mem lookups: task->mm->pgd */
+	write_aux_reg(ARC_REG_SCRATCH_DATA0, next->pgd);
+#endif
+
+	get_new_mmu_context(next);
+}
+
+/*
+ * Called at the time of execve() to get a new ASID
+ * Note the subtlety here: get_new_mmu_context() behaves differently here
+ * vs. in switch_mm(). Here it always returns a new ASID, because mm has
+ * an unallocated "initial" value, while in latter, it moves to a new ASID,
+ * only if it was unallocated
+ */
+#define activate_mm(prev, next)		switch_mm(prev, next, NULL)
+
+/* it seemed that deactivate_mm( ) is a reasonable place to do book-keeping
+ * for retiring-mm. However destroy_context( ) still needs to do that because
+ * between mm_release( ) = >deactive_mm( ) and
+ * mmput => .. => __mmdrop( ) => destroy_context( )
+ * there is a good chance that task gets sched-out/in, making it's ASID valid
+ * again (this teased me for a whole day).
+ */
+#define deactivate_mm(tsk, mm)   do { } while (0)
+
+#define enter_lazy_tlb(mm, tsk)
+
+#endif /* __ASM_ARC_MMU_CONTEXT_H */
diff --git a/arch/arc/include/asm/module.h b/arch/arc/include/asm/module.h
new file mode 100644
index 00000000000..518222bb3f8
--- /dev/null
+++ b/arch/arc/include/asm/module.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
+
+ */
+
+#ifndef _ASM_ARC_MODULE_H
+#define _ASM_ARC_MODULE_H
+
+#include <asm-generic/module.h>
+
+#ifdef CONFIG_ARC_DW2_UNWIND
+struct mod_arch_specific {
+	void *unw_info;
+	int unw_sec_idx;
+};
+#endif
+
+#define MODULE_PROC_FAMILY "ARC700"
+
+#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
+
+#endif /* _ASM_ARC_MODULE_H */
diff --git a/arch/arc/include/asm/mutex.h b/arch/arc/include/asm/mutex.h
new file mode 100644
index 00000000000..a2f88ff9f50
--- /dev/null
+++ b/arch/arc/include/asm/mutex.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * xchg() based mutex fast path maintains a state of 0 or 1, as opposed to
+ * atomic dec based which can "count" any number of lock contenders.
+ * This ideally needs to be fixed in core, but for now switching to dec ver.
+ */
+#if defined(CONFIG_SMP) && (CONFIG_NR_CPUS > 2)
+#include <asm-generic/mutex-dec.h>
+#else
+#include <asm-generic/mutex-xchg.h>
+#endif
diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h
new file mode 100644
index 00000000000..9c8aa41e45c
--- /dev/null
+++ b/arch/arc/include/asm/page.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARC_PAGE_H
+#define __ASM_ARC_PAGE_H
+
+#include <uapi/asm/page.h>
+
+
+#ifndef __ASSEMBLY__
+
+#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)	free_page(addr)
+
+#define clear_page(paddr)		memset((paddr), 0, PAGE_SIZE)
+#define copy_page(to, from)		memcpy((to), (from), PAGE_SIZE)
+
+struct vm_area_struct;
+struct page;
+
+#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+
+void copy_user_highpage(struct page *to, struct page *from,
+			unsigned long u_vaddr, struct vm_area_struct *vma);
+void clear_user_page(void *to, unsigned long u_vaddr, struct page *page);
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct {
+	unsigned long pte;
+} pte_t;
+typedef struct {
+	unsigned long pgd;
+} pgd_t;
+typedef struct {
+	unsigned long pgprot;
+} pgprot_t;
+typedef unsigned long pgtable_t;
+
+#define pte_val(x)      ((x).pte)
+#define pgd_val(x)      ((x).pgd)
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) })
+#define __pgd(x)        ((pgd_t) { (x) })
+#define __pgprot(x)     ((pgprot_t) { (x) })
+
+#define pte_pgprot(x) __pgprot(pte_val(x))
+
+#else /* !STRICT_MM_TYPECHECKS */
+
+typedef unsigned long pte_t;
+typedef unsigned long pgd_t;
+typedef unsigned long pgprot_t;
+typedef unsigned long pgtable_t;
+
+#define pte_val(x)	(x)
+#define pgd_val(x)	(x)
+#define pgprot_val(x)	(x)
+#define __pte(x)	(x)
+#define __pgprot(x)	(x)
+#define pte_pgprot(x)	(x)
+
+#endif
+
+#define ARCH_PFN_OFFSET     (CONFIG_LINUX_LINK_BASE >> PAGE_SHIFT)
+
+#define pfn_valid(pfn)      (((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
+
+/*
+ * __pa, __va, virt_to_page (ALERT: deprecated, don't use them)
+ *
+ * These macros have historically been misnamed
+ * virt here means link-address/program-address as embedded in object code.
+ * So if kernel img is linked at 0x8000_0000 onwards, 0x8010_0000 will be
+ * 128th page, and virt_to_page( ) will return the struct page corresp to it.
+ * mem_map[ ] is an array of struct page for each page frame in the system
+ *
+ * Independent of where linux is linked at, link-addr = physical address
+ * So the old macro  __pa = vaddr + PAGE_OFFSET - CONFIG_LINUX_LINK_BASE
+ * would have been wrong in case kernel is not at 0x8zs
+ */
+#define __pa(vaddr)  ((unsigned long)vaddr)
+#define __va(paddr)  ((void *)((unsigned long)(paddr)))
+
+#define virt_to_page(kaddr)	\
+	(mem_map + ((__pa(kaddr) - CONFIG_LINUX_LINK_BASE) >> PAGE_SHIFT))
+
+#define virt_addr_valid(kaddr)  pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+/* Default Permissions for stack/heaps pages (Non Executable) */
+#define VM_DATA_DEFAULT_FLAGS   (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE)
+
+#define WANT_PAGE_VIRTUAL   1
+
+#include <asm-generic/memory_model.h>   /* page_to_pfn, pfn_to_page */
+#include <asm-generic/getorder.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/perf_event.h b/arch/arc/include/asm/perf_event.h
new file mode 100644
index 00000000000..cbf755e32a0
--- /dev/null
+++ b/arch/arc/include/asm/perf_event.h
@@ -0,0 +1,215 @@
+/*
+ * Linux performance counter support for ARC
+ *
+ * Copyright (C) 2011-2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_PERF_EVENT_H
+#define __ASM_PERF_EVENT_H
+
+/* real maximum varies per CPU, this is the maximum supported by the driver */
+#define ARC_PMU_MAX_HWEVENTS	64
+
+#define ARC_REG_CC_BUILD	0xF6
+#define ARC_REG_CC_INDEX	0x240
+#define ARC_REG_CC_NAME0	0x241
+#define ARC_REG_CC_NAME1	0x242
+
+#define ARC_REG_PCT_BUILD	0xF5
+#define ARC_REG_PCT_COUNTL	0x250
+#define ARC_REG_PCT_COUNTH	0x251
+#define ARC_REG_PCT_SNAPL	0x252
+#define ARC_REG_PCT_SNAPH	0x253
+#define ARC_REG_PCT_CONFIG	0x254
+#define ARC_REG_PCT_CONTROL	0x255
+#define ARC_REG_PCT_INDEX	0x256
+
+#define ARC_REG_PCT_CONTROL_CC	(1 << 16)	/* clear counts */
+#define ARC_REG_PCT_CONTROL_SN	(1 << 17)	/* snapshot */
+
+struct arc_reg_pct_build {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int m:8, c:8, r:6, s:2, v:8;
+#else
+	unsigned int v:8, s:2, r:6, c:8, m:8;
+#endif
+};
+
+struct arc_reg_cc_build {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int c:16, r:8, v:8;
+#else
+	unsigned int v:8, r:8, c:16;
+#endif
+};
+
+#define PERF_COUNT_ARC_DCLM	(PERF_COUNT_HW_MAX + 0)
+#define PERF_COUNT_ARC_DCSM	(PERF_COUNT_HW_MAX + 1)
+#define PERF_COUNT_ARC_ICM	(PERF_COUNT_HW_MAX + 2)
+#define PERF_COUNT_ARC_BPOK	(PERF_COUNT_HW_MAX + 3)
+#define PERF_COUNT_ARC_EDTLB	(PERF_COUNT_HW_MAX + 4)
+#define PERF_COUNT_ARC_EITLB	(PERF_COUNT_HW_MAX + 5)
+#define PERF_COUNT_ARC_HW_MAX	(PERF_COUNT_HW_MAX + 6)
+
+/*
+ * The "generalized" performance events seem to really be a copy
+ * of the available events on x86 processors; the mapping to ARC
+ * events is not always possible 1-to-1. Fortunately, there doesn't
+ * seem to be an exact definition for these events, so we can cheat
+ * a bit where necessary.
+ *
+ * In particular, the following PERF events may behave a bit differently
+ * compared to other architectures:
+ *
+ * PERF_COUNT_HW_CPU_CYCLES
+ *	Cycles not in halted state
+ *
+ * PERF_COUNT_HW_REF_CPU_CYCLES
+ *	Reference cycles not in halted state, same as PERF_COUNT_HW_CPU_CYCLES
+ *	for now as we don't do Dynamic Voltage/Frequency Scaling (yet)
+ *
+ * PERF_COUNT_HW_BUS_CYCLES
+ *	Unclear what this means, Intel uses 0x013c, which according to
+ *	their datasheet means "unhalted reference cycles". It sounds similar
+ *	to PERF_COUNT_HW_REF_CPU_CYCLES, and we use the same counter for it.
+ *
+ * PERF_COUNT_HW_STALLED_CYCLES_BACKEND
+ * PERF_COUNT_HW_STALLED_CYCLES_FRONTEND
+ *	The ARC 700 can either measure stalls per pipeline stage, or all stalls
+ *	combined; for now we assign all stalls to STALLED_CYCLES_BACKEND
+ *	and all pipeline flushes (e.g. caused by mispredicts, etc.) to
+ *	STALLED_CYCLES_FRONTEND.
+ *
+ *	We could start multiple performance counters and combine everything
+ *	afterwards, but that makes it complicated.
+ *
+ *	Note that I$ cache misses aren't counted by either of the two!
+ */
+
+static const char * const arc_pmu_ev_hw_map[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = "crun",
+	[PERF_COUNT_HW_REF_CPU_CYCLES] = "crun",
+	[PERF_COUNT_HW_BUS_CYCLES] = "crun",
+	[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
+	[PERF_COUNT_HW_BRANCH_MISSES] = "bpfail",
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmp",
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = "bflush",
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = "bstall",
+	[PERF_COUNT_ARC_DCLM] = "dclm",
+	[PERF_COUNT_ARC_DCSM] = "dcsm",
+	[PERF_COUNT_ARC_ICM] = "icm",
+	[PERF_COUNT_ARC_BPOK] = "bpok",
+	[PERF_COUNT_ARC_EDTLB] = "edtlb",
+	[PERF_COUNT_ARC_EITLB] = "eitlb",
+};
+
+#define C(_x)			PERF_COUNT_HW_CACHE_##_x
+#define CACHE_OP_UNSUPPORTED	0xffff
+
+static const unsigned arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	[C(L1D)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCLM,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCSM,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_ICM,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EDTLB,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EITLB,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = PERF_COUNT_HW_BRANCH_INSTRUCTIONS,
+			[C(RESULT_MISS)]	= PERF_COUNT_HW_BRANCH_MISSES,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+#endif /* __ASM_PERF_EVENT_H */
diff --git a/arch/arc/include/asm/pgalloc.h b/arch/arc/include/asm/pgalloc.h
new file mode 100644
index 00000000000..81208bfd9dc
--- /dev/null
+++ b/arch/arc/include/asm/pgalloc.h
@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * vineetg: June 2011
+ *  -"/proc/meminfo | grep PageTables" kept on increasing
+ *   Recently added pgtable dtor was not getting called.
+ *
+ * vineetg: May 2011
+ *  -Variable pg-sz means that Page Tables could be variable sized themselves
+ *    So calculate it based on addr traversal split [pgd-bits:pte-bits:xxx]
+ *  -Page Table size capped to max 1 to save memory - hence verified.
+ *  -Since these deal with constants, gcc compile-time optimizes them.
+ *
+ * vineetg: Nov 2010
+ *  -Added pgtable ctor/dtor used for pgtable mem accounting
+ *
+ * vineetg: April 2010
+ *  -Switched pgtable_t from being struct page * to unsigned long
+ *      =Needed so that Page Table allocator (pte_alloc_one) is not forced to
+ *       to deal with struct page. Thay way in future we can make it allocate
+ *       multiple PG Tbls in one Page Frame
+ *      =sweet side effect is avoiding calls to ugly page_address( ) from the
+ *       pg-tlb allocator sub-sys (pte_alloc_one, ptr_free, pmd_populate
+ *
+ *  Amit Bhor, Sameer Dhavale: Codito Technologies 2004
+ */
+
+#ifndef _ASM_ARC_PGALLOC_H
+#define _ASM_ARC_PGALLOC_H
+
+#include <linux/mm.h>
+#include <linux/log2.h>
+
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
+{
+	pmd_set(pmd, pte);
+}
+
+static inline void
+pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t ptep)
+{
+	pmd_set(pmd, (pte_t *) ptep);
+}
+
+static inline int __get_order_pgd(void)
+{
+	return get_order(PTRS_PER_PGD * 4);
+}
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	int num, num2;
+	pgd_t *ret = (pgd_t *) __get_free_pages(GFP_KERNEL, __get_order_pgd());
+
+	if (ret) {
+		num = USER_PTRS_PER_PGD + USER_KERNEL_GUTTER / PGDIR_SIZE;
+		memzero(ret, num * sizeof(pgd_t));
+
+		num2 = VMALLOC_SIZE / PGDIR_SIZE;
+		memcpy(ret + num, swapper_pg_dir + num, num2 * sizeof(pgd_t));
+
+		memzero(ret + num + num2,
+			       (PTRS_PER_PGD - num - num2) * sizeof(pgd_t));
+
+	}
+	return ret;
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	free_pages((unsigned long)pgd, __get_order_pgd());
+}
+
+
+/*
+ * With software-only page-tables, addr-split for traversal is tweakable and
+ * that directly governs how big tables would be at each level.
+ * Further, the MMU page size is configurable.
+ * Thus we need to programatically assert the size constraint
+ * All of this is const math, allowing gcc to do constant folding/propagation.
+ */
+
+static inline int __get_order_pte(void)
+{
+	return get_order(PTRS_PER_PTE * 4);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+					unsigned long address)
+{
+	pte_t *pte;
+
+	pte = (pte_t *) __get_free_pages(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO,
+					 __get_order_pte());
+
+	return pte;
+}
+
+static inline pgtable_t
+pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	pgtable_t pte_pg;
+	struct page *page;
+
+	pte_pg = __get_free_pages(GFP_KERNEL | __GFP_REPEAT, __get_order_pte());
+	if (!pte_pg)
+		return 0;
+	memzero((void *)pte_pg, PTRS_PER_PTE * 4);
+	page = virt_to_page(pte_pg);
+	if (!pgtable_page_ctor(page)) {
+		__free_page(page);
+		return 0;
+	}
+
+	return pte_pg;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_pages((unsigned long)pte, __get_order_pte()); /* takes phy addr */
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t ptep)
+{
+	pgtable_page_dtor(virt_to_page(ptep));
+	free_pages(ptep, __get_order_pte());
+}
+
+#define __pte_free_tlb(tlb, pte, addr)  pte_free((tlb)->mm, pte)
+
+#define check_pgt_cache()   do { } while (0)
+#define pmd_pgtable(pmd) pmd_page_vaddr(pmd)
+
+#endif /* _ASM_ARC_PGALLOC_H */
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
new file mode 100644
index 00000000000..6b0b7f7ef78
--- /dev/null
+++ b/arch/arc/include/asm/pgtable.h
@@ -0,0 +1,398 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * vineetg: May 2011
+ *  -Folded PAGE_PRESENT (used by VM) and PAGE_VALID (used by MMU) into 1.
+ *     They are semantically the same although in different contexts
+ *     VALID marks a TLB entry exists and it will only happen if PRESENT
+ *  - Utilise some unused free bits to confine PTE flags to 12 bits
+ *     This is a must for 4k pg-sz
+ *
+ * vineetg: Mar 2011 - changes to accomodate MMU TLB Page Descriptor mods
+ *  -TLB Locking never really existed, except for initial specs
+ *  -SILENT_xxx not needed for our port
+ *  -Per my request, MMU V3 changes the layout of some of the bits
+ *     to avoid a few shifts in TLB Miss handlers.
+ *
+ * vineetg: April 2010
+ *  -PGD entry no longer contains any flags. If empty it is 0, otherwise has
+ *   Pg-Tbl ptr. Thus pmd_present(), pmd_valid(), pmd_set( ) become simpler
+ *
+ * vineetg: April 2010
+ *  -Switched form 8:11:13 split for page table lookup to 11:8:13
+ *  -this speeds up page table allocation itself as we now have to memset 1K
+ *    instead of 8k per page table.
+ * -TODO: Right now page table alloc is 8K and rest 7K is unused
+ *    need to optimise it
+ *
+ * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
+ */
+
+#ifndef _ASM_ARC_PGTABLE_H
+#define _ASM_ARC_PGTABLE_H
+
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm-generic/pgtable-nopmd.h>
+
+/**************************************************************************
+ * Page Table Flags
+ *
+ * ARC700 MMU only deals with softare managed TLB entries.
+ * Page Tables are purely for Linux VM's consumption and the bits below are
+ * suited to that (uniqueness). Hence some are not implemented in the TLB and
+ * some have different value in TLB.
+ * e.g. MMU v2: K_READ bit is 8 and so is GLOBAL (possible becoz they live in
+ *      seperate PD0 and PD1, which combined forms a translation entry)
+ *      while for PTE perspective, they are 8 and 9 respectively
+ * with MMU v3: Most bits (except SHARED) represent the exact hardware pos
+ *      (saves some bit shift ops in TLB Miss hdlrs)
+ */
+
+#if (CONFIG_ARC_MMU_VER <= 2)
+
+#define _PAGE_ACCESSED      (1<<1)	/* Page is accessed (S) */
+#define _PAGE_CACHEABLE     (1<<2)	/* Page is cached (H) */
+#define _PAGE_EXECUTE       (1<<3)	/* Page has user execute perm (H) */
+#define _PAGE_WRITE         (1<<4)	/* Page has user write perm (H) */
+#define _PAGE_READ          (1<<5)	/* Page has user read perm (H) */
+#define _PAGE_MODIFIED      (1<<6)	/* Page modified (dirty) (S) */
+#define _PAGE_FILE          (1<<7)	/* page cache/ swap (S) */
+#define _PAGE_GLOBAL        (1<<8)	/* Page is global (H) */
+#define _PAGE_PRESENT       (1<<10)	/* TLB entry is valid (H) */
+
+#else	/* MMU v3 onwards */
+
+#define _PAGE_CACHEABLE     (1<<0)	/* Page is cached (H) */
+#define _PAGE_EXECUTE       (1<<1)	/* Page has user execute perm (H) */
+#define _PAGE_WRITE         (1<<2)	/* Page has user write perm (H) */
+#define _PAGE_READ          (1<<3)	/* Page has user read perm (H) */
+#define _PAGE_ACCESSED      (1<<4)	/* Page is accessed (S) */
+#define _PAGE_MODIFIED      (1<<5)	/* Page modified (dirty) (S) */
+#define _PAGE_FILE          (1<<6)	/* page cache/ swap (S) */
+#define _PAGE_GLOBAL        (1<<8)	/* Page is global (H) */
+#define _PAGE_PRESENT       (1<<9)	/* TLB entry is valid (H) */
+#define _PAGE_SHARED_CODE   (1<<11)	/* Shared Code page with cmn vaddr
+					   usable for shared TLB entries (H) */
+#endif
+
+/* vmalloc permissions */
+#define _K_PAGE_PERMS  (_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \
+			_PAGE_GLOBAL | _PAGE_PRESENT)
+
+#ifdef CONFIG_ARC_CACHE_PAGES
+#define _PAGE_DEF_CACHEABLE _PAGE_CACHEABLE
+#else
+#define _PAGE_DEF_CACHEABLE (0)
+#endif
+
+/* Helper for every "user" page
+ * -kernel can R/W/X
+ * -by default cached, unless config otherwise
+ * -present in memory
+ */
+#define ___DEF (_PAGE_PRESENT | _PAGE_DEF_CACHEABLE)
+
+/* Set of bits not changed in pte_modify */
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED)
+
+/* More Abbrevaited helpers */
+#define PAGE_U_NONE     __pgprot(___DEF)
+#define PAGE_U_R        __pgprot(___DEF | _PAGE_READ)
+#define PAGE_U_W_R      __pgprot(___DEF | _PAGE_READ | _PAGE_WRITE)
+#define PAGE_U_X_R      __pgprot(___DEF | _PAGE_READ | _PAGE_EXECUTE)
+#define PAGE_U_X_W_R    __pgprot(___DEF | _PAGE_READ | _PAGE_WRITE | \
+						       _PAGE_EXECUTE)
+
+#define PAGE_SHARED	PAGE_U_W_R
+
+/* While kernel runs out of unstranslated space, vmalloc/modules use a chunk of
+ * user vaddr space - visible in all addr spaces, but kernel mode only
+ * Thus Global, all-kernel-access, no-user-access, cached
+ */
+#define PAGE_KERNEL          __pgprot(_K_PAGE_PERMS | _PAGE_DEF_CACHEABLE)
+
+/* ioremap */
+#define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS)
+
+/* Masks for actual TLB "PD"s */
+#define PTE_BITS_IN_PD0		(_PAGE_GLOBAL | _PAGE_PRESENT)
+#define PTE_BITS_RWX		(_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ)
+#define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE)
+
+/**************************************************************************
+ * Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
+ *
+ * Certain cases have 1:1 mapping
+ *  e.g. __P101 means VM_READ, VM_EXEC and !VM_SHARED
+ *       which directly corresponds to  PAGE_U_X_R
+ *
+ * Other rules which cause the divergence from 1:1 mapping
+ *
+ *  1. Although ARC700 can do exclusive execute/write protection (meaning R
+ *     can be tracked independet of X/W unlike some other CPUs), still to
+ *     keep things consistent with other archs:
+ *      -Write implies Read:   W => R
+ *      -Execute implies Read: X => R
+ *
+ *  2. Pvt Writable doesn't have Write Enabled initially: Pvt-W => !W
+ *     This is to enable COW mechanism
+ */
+	/* xwr */
+#define __P000  PAGE_U_NONE
+#define __P001  PAGE_U_R
+#define __P010  PAGE_U_R	/* Pvt-W => !W */
+#define __P011  PAGE_U_R	/* Pvt-W => !W */
+#define __P100  PAGE_U_X_R	/* X => R */
+#define __P101  PAGE_U_X_R
+#define __P110  PAGE_U_X_R	/* Pvt-W => !W and X => R */
+#define __P111  PAGE_U_X_R	/* Pvt-W => !W */
+
+#define __S000  PAGE_U_NONE
+#define __S001  PAGE_U_R
+#define __S010  PAGE_U_W_R	/* W => R */
+#define __S011  PAGE_U_W_R
+#define __S100  PAGE_U_X_R	/* X => R */
+#define __S101  PAGE_U_X_R
+#define __S110  PAGE_U_X_W_R	/* X => R */
+#define __S111  PAGE_U_X_W_R
+
+/****************************************************************
+ * Page Table Lookup split
+ *
+ * We implement 2 tier paging and since this is all software, we are free
+ * to customize the span of a PGD / PTE entry to suit us
+ *
+ *			32 bit virtual address
+ * -------------------------------------------------------
+ * | BITS_FOR_PGD    |  BITS_FOR_PTE    |  BITS_IN_PAGE  |
+ * -------------------------------------------------------
+ *       |                  |                |
+ *       |                  |                --> off in page frame
+ *       |		    |
+ *       |                  ---> index into Page Table
+ *       |
+ *       ----> index into Page Directory
+ */
+
+#define BITS_IN_PAGE	PAGE_SHIFT
+
+/* Optimal Sizing of Pg Tbl - based on MMU page size */
+#if defined(CONFIG_ARC_PAGE_SIZE_8K)
+#define BITS_FOR_PTE	8
+#elif defined(CONFIG_ARC_PAGE_SIZE_16K)
+#define BITS_FOR_PTE	8
+#elif defined(CONFIG_ARC_PAGE_SIZE_4K)
+#define BITS_FOR_PTE	9
+#endif
+
+#define BITS_FOR_PGD	(32 - BITS_FOR_PTE - BITS_IN_PAGE)
+
+#define PGDIR_SHIFT	(BITS_FOR_PTE + BITS_IN_PAGE)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)	/* vaddr span, not PDG sz */
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+#ifdef __ASSEMBLY__
+#define	PTRS_PER_PTE	(1 << BITS_FOR_PTE)
+#define	PTRS_PER_PGD	(1 << BITS_FOR_PGD)
+#else
+#define	PTRS_PER_PTE	(1UL << BITS_FOR_PTE)
+#define	PTRS_PER_PGD	(1UL << BITS_FOR_PGD)
+#endif
+/*
+ * Number of entries a user land program use.
+ * TASK_SIZE is the maximum vaddr that can be used by a userland program.
+ */
+#define	USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+
+/*
+ * No special requirements for lowest virtual address we permit any user space
+ * mapping to be mapped at.
+ */
+#define FIRST_USER_ADDRESS      0
+
+
+/****************************************************************
+ * Bucket load of VM Helpers
+ */
+
+#ifndef __ASSEMBLY__
+
+#define pte_ERROR(e) \
+	pr_crit("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+	pr_crit("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/* the zero page used for uninitialized and anonymous pages */
+extern char empty_zero_page[PAGE_SIZE];
+#define ZERO_PAGE(vaddr)	(virt_to_page(empty_zero_page))
+
+#define pte_unmap(pte)		do { } while (0)
+#define pte_unmap_nested(pte)		do { } while (0)
+
+#define set_pte(pteptr, pteval)	((*(pteptr)) = (pteval))
+#define set_pmd(pmdptr, pmdval)	(*(pmdptr) = pmdval)
+
+/* find the page descriptor of the Page Tbl ref by PMD entry */
+#define pmd_page(pmd)		virt_to_page(pmd_val(pmd) & PAGE_MASK)
+
+/* find the logical addr (phy for ARC) of the Page Tbl ref by PMD entry */
+#define pmd_page_vaddr(pmd)	(pmd_val(pmd) & PAGE_MASK)
+
+/* In a 2 level sys, setup the PGD entry with PTE value */
+static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
+{
+	pmd_val(*pmdp) = (unsigned long)ptep;
+}
+
+#define pte_none(x)			(!pte_val(x))
+#define pte_present(x)			(pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm, addr, ptep)	set_pte_at(mm, addr, ptep, __pte(0))
+
+#define pmd_none(x)			(!pmd_val(x))
+#define	pmd_bad(x)			((pmd_val(x) & ~PAGE_MASK))
+#define pmd_present(x)			(pmd_val(x))
+#define pmd_clear(xp)			do { pmd_val(*(xp)) = 0; } while (0)
+
+#define pte_page(x) (mem_map + \
+		(unsigned long)(((pte_val(x) - PAGE_OFFSET) >> PAGE_SHIFT)))
+
+#define mk_pte(page, pgprot)						\
+({									\
+	pte_t pte;							\
+	pte_val(pte) = __pa(page_address(page)) + pgprot_val(pgprot);	\
+	pte;								\
+})
+
+/* TBD: Non linear mapping stuff */
+static inline int pte_file(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_FILE;
+}
+
+#define PTE_FILE_MAX_BITS	30
+#define pgoff_to_pte(x)         __pte(x)
+#define pte_to_pgoff(x)		(pte_val(x) >> 2)
+#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
+#define pfn_pte(pfn, prot)	(__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
+#define __pte_index(addr)	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+/*
+ * pte_offset gets a @ptr to PMD entry (PGD in our 2-tier paging system)
+ * and returns ptr to PTE entry corresponding to @addr
+ */
+#define pte_offset(dir, addr) ((pte_t *)(pmd_page_vaddr(*dir)) +\
+					 __pte_index(addr))
+
+/* No mapping of Page Tables in high mem etc, so following same as above */
+#define pte_offset_kernel(dir, addr)		pte_offset(dir, addr)
+#define pte_offset_map(dir, addr)		pte_offset(dir, addr)
+
+/* Zoo of pte_xxx function */
+#define pte_read(pte)		(pte_val(pte) & _PAGE_READ)
+#define pte_write(pte)		(pte_val(pte) & _PAGE_WRITE)
+#define pte_dirty(pte)		(pte_val(pte) & _PAGE_MODIFIED)
+#define pte_young(pte)		(pte_val(pte) & _PAGE_ACCESSED)
+#define pte_special(pte)	(0)
+
+#define PTE_BIT_FUNC(fn, op) \
+	static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
+
+PTE_BIT_FUNC(wrprotect,	&= ~(_PAGE_WRITE));
+PTE_BIT_FUNC(mkwrite,	|= (_PAGE_WRITE));
+PTE_BIT_FUNC(mkclean,	&= ~(_PAGE_MODIFIED));
+PTE_BIT_FUNC(mkdirty,	|= (_PAGE_MODIFIED));
+PTE_BIT_FUNC(mkold,	&= ~(_PAGE_ACCESSED));
+PTE_BIT_FUNC(mkyoung,	|= (_PAGE_ACCESSED));
+PTE_BIT_FUNC(exprotect,	&= ~(_PAGE_EXECUTE));
+PTE_BIT_FUNC(mkexec,	|= (_PAGE_EXECUTE));
+
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+
+/* Macro to mark a page protection as uncacheable */
+#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) & ~_PAGE_CACHEABLE))
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pteval)
+{
+	set_pte(ptep, pteval);
+}
+
+/*
+ * All kernel related VM pages are in init's mm.
+ */
+#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
+#define pgd_index(addr)		((addr) >> PGDIR_SHIFT)
+#define pgd_offset(mm, addr)	(((mm)->pgd)+pgd_index(addr))
+
+/*
+ * Macro to quickly access the PGD entry, utlising the fact that some
+ * arch may cache the pointer to Page Directory of "current" task
+ * in a MMU register
+ *
+ * Thus task->mm->pgd (3 pointer dereferences, cache misses etc simply
+ * becomes read a register
+ *
+ * ********CAUTION*******:
+ * Kernel code might be dealing with some mm_struct of NON "current"
+ * Thus use this macro only when you are certain that "current" is current
+ * e.g. when dealing with signal frame setup code etc
+ */
+#ifndef CONFIG_SMP
+#define pgd_offset_fast(mm, addr)	\
+({					\
+	pgd_t *pgd_base = (pgd_t *) read_aux_reg(ARC_REG_SCRATCH_DATA0);  \
+	pgd_base + pgd_index(addr);	\
+})
+#else
+#define pgd_offset_fast(mm, addr)	pgd_offset(mm, addr)
+#endif
+
+extern void paging_init(void);
+extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE);
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
+		      pte_t *ptep);
+
+/* Encode swap {type,off} tuple into PTE
+ * We reserve 13 bits for 5-bit @type, keeping bits 12-5 zero, ensuring that
+ * both PAGE_FILE and PAGE_PRESENT are zero in a PTE holding swap "identifier"
+ */
+#define __swp_entry(type, off)	((swp_entry_t) { \
+					((type) & 0x1f) | ((off) << 13) })
+
+/* Decode a PTE containing swap "identifier "into constituents */
+#define __swp_type(pte_lookalike)	(((pte_lookalike).val) & 0x1f)
+#define __swp_offset(pte_lookalike)	((pte_lookalike).val << 13)
+
+/* NOPs, to keep generic kernel happy */
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+#define kern_addr_valid(addr)	(1)
+
+/*
+ * remap a physical page `pfn' of size `size' with page protection `prot'
+ * into virtual address `from'
+ */
+#include <asm-generic/pgtable.h>
+
+/* to cope with aliasing VIPT cache */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()   do { } while (0)
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
new file mode 100644
index 00000000000..d99f9b37cd1
--- /dev/null
+++ b/arch/arc/include/asm/processor.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * vineetg: March 2009
+ *  -Implemented task_pt_regs( )
+ *
+ * Amit Bhor, Sameer Dhavale, Ashwin Chaugule: Codito Technologies 2004
+ */
+
+#ifndef __ASM_ARC_PROCESSOR_H
+#define __ASM_ARC_PROCESSOR_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+
+/* Arch specific stuff which needs to be saved per task.
+ * However these items are not so important so as to earn a place in
+ * struct thread_info
+ */
+struct thread_struct {
+	unsigned long ksp;	/* kernel mode stack pointer */
+	unsigned long callee_reg;	/* pointer to callee regs */
+	unsigned long fault_address;	/* dbls as brkpt holder as well */
+#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
+	struct arc_fpu fpu;
+#endif
+};
+
+#define INIT_THREAD  {                          \
+	.ksp = sizeof(init_stack) + (unsigned long) init_stack, \
+}
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Return saved PC of a blocked thread  */
+unsigned long thread_saved_pc(struct task_struct *t);
+
+#define task_pt_regs(p) \
+	((struct pt_regs *)(THREAD_SIZE + (void *)task_stack_page(p)) - 1)
+
+/* Free all resources held by a thread */
+#define release_thread(thread) do { } while (0)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)    do { } while (0)
+
+/*
+ * A lot of busy-wait loops in SMP are based off of non-volatile data otherwise
+ * get optimised away by gcc
+ */
+#ifdef CONFIG_SMP
+#define cpu_relax()	__asm__ __volatile__ ("" : : : "memory")
+#else
+#define cpu_relax()	do { } while (0)
+#endif
+
+#define copy_segments(tsk, mm)      do { } while (0)
+#define release_segments(mm)        do { } while (0)
+
+#define KSTK_EIP(tsk)   (task_pt_regs(tsk)->ret)
+
+/*
+ * Where abouts of Task's sp, fp, blink when it was last seen in kernel mode.
+ * Look in process.c for details of kernel stack layout
+ */
+#define KSTK_ESP(tsk)   (tsk->thread.ksp)
+
+#define KSTK_REG(tsk, off)	(*((unsigned int *)(KSTK_ESP(tsk) + \
+					sizeof(struct callee_regs) + off)))
+
+#define KSTK_BLINK(tsk) KSTK_REG(tsk, 4)
+#define KSTK_FP(tsk)    KSTK_REG(tsk, 0)
+
+extern void start_thread(struct pt_regs * regs, unsigned long pc,
+			 unsigned long usp);
+
+extern unsigned int get_wchan(struct task_struct *p);
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ * Should the PC register be read instead ? This macro does not seem to
+ * be used in many places so this wont be all that bad.
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l; })
+
+#endif /* !__ASSEMBLY__ */
+
+/* Kernels Virtual memory area.
+ * Unlike other architectures(MIPS, sh, cris ) ARC 700 does not have a
+ * "kernel translated" region (like KSEG2 in MIPS). So we use a upper part
+ * of the translated bottom 2GB for kernel virtual memory and protect
+ * these pages from user accesses by disabling Ru, Eu and Wu.
+ */
+#define VMALLOC_SIZE	(0x10000000)	/* 256M */
+#define VMALLOC_START	(PAGE_OFFSET - VMALLOC_SIZE)
+#define VMALLOC_END	(PAGE_OFFSET)
+
+/* Most of the architectures seem to be keeping some kind of padding between
+ * userspace TASK_SIZE and PAGE_OFFSET. i.e TASK_SIZE != PAGE_OFFSET.
+ */
+#define USER_KERNEL_GUTTER    0x10000000
+
+/* User address space:
+ * On ARC700, CPU allows the entire lower half of 32 bit address space to be
+ * translated. Thus potentially 2G (0:0x7FFF_FFFF) could be User vaddr space.
+ * However we steal 256M for kernel addr (0x7000_0000:0x7FFF_FFFF) and another
+ * 256M (0x6000_0000:0x6FFF_FFFF) is gutter between user/kernel spaces
+ * Thus total User vaddr space is (0:0x5FFF_FFFF)
+ */
+#define TASK_SIZE	(PAGE_OFFSET - VMALLOC_SIZE - USER_KERNEL_GUTTER)
+
+#define STACK_TOP       TASK_SIZE
+#define STACK_TOP_MAX   STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE      (TASK_SIZE / 3)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_ARC_PROCESSOR_H */
diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h
new file mode 100644
index 00000000000..1bfeec2c055
--- /dev/null
+++ b/arch/arc/include/asm/ptrace.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
+ */
+#ifndef __ASM_ARC_PTRACE_H
+#define __ASM_ARC_PTRACE_H
+
+#include <uapi/asm/ptrace.h>
+
+#ifndef __ASSEMBLY__
+
+/* THE pt_regs: Defines how regs are saved during entry into kernel */
+
+struct pt_regs {
+
+	/* Real registers */
+	long bta;	/* bta_l1, bta_l2, erbta */
+
+	long lp_start, lp_end, lp_count;
+
+	long status32;	/* status32_l1, status32_l2, erstatus */
+	long ret;	/* ilink1, ilink2 or eret */
+	long blink;
+	long fp;
+	long r26;	/* gp */
+
+	long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
+
+	long sp;	/* user/kernel sp depending on where we came from  */
+	long orig_r0;
+
+	/*
+	 * To distinguish bet excp, syscall, irq
+	 * For traps and exceptions, Exception Cause Register.
+	 * 	ECR: <00> <VV> <CC> <PP>
+	 * 	Last word used by Linux for extra state mgmt (syscall-restart)
+	 * For interrupts, use artificial ECR values to note current prio-level
+	 */
+	union {
+		struct {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+			unsigned long state:8, ecr_vec:8,
+				      ecr_cause:8, ecr_param:8;
+#else
+			unsigned long ecr_param:8, ecr_cause:8,
+				      ecr_vec:8, state:8;
+#endif
+		};
+		unsigned long event;
+	};
+
+	long user_r25;
+};
+
+/* Callee saved registers - need to be saved only when you are scheduled out */
+
+struct callee_regs {
+	long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
+};
+
+#define instruction_pointer(regs)	((regs)->ret)
+#define profile_pc(regs)		instruction_pointer(regs)
+
+/* return 1 if user mode or 0 if kernel mode */
+#define user_mode(regs) (regs->status32 & STATUS_U_MASK)
+
+#define user_stack_pointer(regs)\
+({  unsigned int sp;		\
+	if (user_mode(regs))	\
+		sp = (regs)->sp;\
+	else			\
+		sp = -1;	\
+	sp;			\
+})
+
+/* return 1 if PC in delay slot */
+#define delay_mode(regs) ((regs->status32 & STATUS_DE_MASK) == STATUS_DE_MASK)
+
+#define in_syscall(regs)    ((regs->ecr_vec == ECR_V_TRAP) && !regs->ecr_param)
+#define in_brkpt_trap(regs) ((regs->ecr_vec == ECR_V_TRAP) && regs->ecr_param)
+
+#define STATE_SCALL_RESTARTED	0x01
+
+#define syscall_wont_restart(reg) (reg->state |= STATE_SCALL_RESTARTED)
+#define syscall_restartable(reg) !(reg->state &  STATE_SCALL_RESTARTED)
+
+#define current_pt_regs()					\
+({								\
+	/* open-coded current_thread_info() */			\
+	register unsigned long sp asm ("sp");			\
+	unsigned long pg_start = (sp & ~(THREAD_SIZE - 1));	\
+	(struct pt_regs *)(pg_start + THREAD_SIZE) - 1;	\
+})
+
+static inline long regs_return_value(struct pt_regs *regs)
+{
+	return regs->r0;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_PTRACE_H */
diff --git a/arch/arc/include/asm/sections.h b/arch/arc/include/asm/sections.h
new file mode 100644
index 00000000000..09db952e14b
--- /dev/null
+++ b/arch/arc/include/asm/sections.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_SECTIONS_H
+#define _ASM_ARC_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+extern char __arc_dccm_base[];
+
+#endif
diff --git a/arch/arc/include/asm/segment.h b/arch/arc/include/asm/segment.h
new file mode 100644
index 00000000000..da2c4597981
--- /dev/null
+++ b/arch/arc/include/asm/segment.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASMARC_SEGMENT_H
+#define __ASMARC_SEGMENT_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long mm_segment_t;
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+#define KERNEL_DS		MAKE_MM_SEG(0)
+#define USER_DS			MAKE_MM_SEG(TASK_SIZE)
+
+#define segment_eq(a, b)	((a) == (b))
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASMARC_SEGMENT_H */
diff --git a/arch/arc/include/asm/serial.h b/arch/arc/include/asm/serial.h
new file mode 100644
index 00000000000..602b0970a76
--- /dev/null
+++ b/arch/arc/include/asm/serial.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_SERIAL_H
+#define _ASM_ARC_SERIAL_H
+
+/*
+ * early-8250 requires BASE_BAUD to be defined and includes this header.
+ * We put in a typical value:
+ * 	(core clk / 16) - i.e. UART samples 16 times per sec.
+ * Athough in multi-platform-image this might not work, specially if the
+ * clk driving the UART is different.
+ * We can't use DeviceTree as this is typically for early serial.
+ */
+
+#include <asm/clk.h>
+
+#define BASE_BAUD	(arc_get_core_freq() / 16)
+
+/*
+ * This is definitely going to break early 8250 consoles on multi-platform
+ * images but hey, it won't add any code complexity for a debug feature of
+ * one broken driver.
+ */
+#ifdef CONFIG_ARC_PLAT_TB10X
+#undef BASE_BAUD
+#define BASE_BAUD	(arc_get_core_freq() / 16 / 3)
+#endif
+
+#endif /* _ASM_ARC_SERIAL_H */
diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h
new file mode 100644
index 00000000000..e10f8cef56a
--- /dev/null
+++ b/arch/arc/include/asm/setup.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASMARC_SETUP_H
+#define __ASMARC_SETUP_H
+
+
+#include <linux/types.h>
+#include <uapi/asm/setup.h>
+
+#define COMMAND_LINE_SIZE 256
+
+/*
+ * Data structure to map a ID to string
+ * Used a lot for bootup reporting of hardware diversity
+ */
+struct id_to_str {
+	int id;
+	const char *str;
+};
+
+struct cpuinfo_data {
+	struct id_to_str info;
+	int up_range;
+};
+
+extern int root_mountflags, end_mem;
+extern int running_on_hw;
+
+void setup_processor(void);
+void __init setup_arch_memory(void);
+
+#endif /* __ASMARC_SETUP_H */
diff --git a/arch/arc/include/asm/shmparam.h b/arch/arc/include/asm/shmparam.h
new file mode 100644
index 00000000000..fffeecc0427
--- /dev/null
+++ b/arch/arc/include/asm/shmparam.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARC_ASM_SHMPARAM_H
+#define __ARC_ASM_SHMPARAM_H
+
+/* Handle upto 2 cache bins */
+#define	SHMLBA	(2 * PAGE_SIZE)
+
+/* Enforce SHMLBA in shmat */
+#define __ARCH_FORCE_SHMLBA
+
+#endif
diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h
new file mode 100644
index 00000000000..5d06eee43ea
--- /dev/null
+++ b/arch/arc/include/asm/smp.h
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARC_SMP_H
+#define __ASM_ARC_SMP_H
+
+#ifdef CONFIG_SMP
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/threads.h>
+
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+
+/* including cpumask.h leads to cyclic deps hence this Forward declaration */
+struct cpumask;
+
+/*
+ * APIs provided by arch SMP code to generic code
+ */
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+
+/*
+ * APIs provided by arch SMP code to rest of arch code
+ */
+extern void __init smp_init_cpus(void);
+extern void first_lines_of_secondary(void);
+extern const char *arc_platform_smp_cpuinfo(void);
+
+/*
+ * API expected BY platform smp code (FROM arch smp code)
+ *
+ * smp_ipi_irq_setup:
+ *	Takes @cpu and @irq to which the arch-common ISR is hooked up
+ */
+extern int smp_ipi_irq_setup(int cpu, int irq);
+
+/*
+ * struct plat_smp_ops	- SMP callbacks provided by platform to ARC SMP
+ *
+ * @info:		SoC SMP specific info for /proc/cpuinfo etc
+ * @cpu_kick:		For Master to kickstart a cpu (optionally at a PC)
+ * @ipi_send:		To send IPI to a @cpu
+ * @ips_clear:		To clear IPI received at @irq
+ */
+struct plat_smp_ops {
+	const char 	*info;
+	void		(*cpu_kick)(int cpu, unsigned long pc);
+	void		(*ipi_send)(int cpu);
+	void		(*ipi_clear)(int irq);
+};
+
+/* TBD: stop exporting it for direct population by platform */
+extern struct plat_smp_ops  plat_smp_ops;
+
+#endif  /* CONFIG_SMP */
+
+/*
+ * ARC700 doesn't support atomic Read-Modify-Write ops.
+ * Originally Interrupts had to be disabled around code to gaurantee atomicity.
+ * The LLOCK/SCOND insns allow writing interrupt-hassle-free based atomic ops
+ * based on retry-if-irq-in-atomic (with hardware assist).
+ * However despite these, we provide the IRQ disabling variant
+ *
+ * (1) These insn were introduced only in 4.10 release. So for older released
+ *	support needed.
+ *
+ * (2) In a SMP setup, the LLOCK/SCOND atomiticity across CPUs needs to be
+ *	gaurantted by the platform (not something which core handles).
+ *	Assuming a platform won't, SMP Linux needs to use spinlocks + local IRQ
+ *	disabling for atomicity.
+ *
+ *	However exported spinlock API is not usable due to cyclic hdr deps
+ *	(even after system.h disintegration upstream)
+ *	asm/bitops.h -> linux/spinlock.h -> linux/preempt.h
+ *		-> linux/thread_info.h -> linux/bitops.h -> asm/bitops.h
+ *
+ *	So the workaround is to use the lowest level arch spinlock API.
+ *	The exported spinlock API is smart enough to be NOP for !CONFIG_SMP,
+ *	but same is not true for ARCH backend, hence the need for 2 variants
+ */
+#ifndef CONFIG_ARC_HAS_LLSC
+
+#include <linux/irqflags.h>
+#ifdef CONFIG_SMP
+
+#include <asm/spinlock.h>
+
+extern arch_spinlock_t smp_atomic_ops_lock;
+extern arch_spinlock_t smp_bitops_lock;
+
+#define atomic_ops_lock(flags)	do {		\
+	local_irq_save(flags);			\
+	arch_spin_lock(&smp_atomic_ops_lock);	\
+} while (0)
+
+#define atomic_ops_unlock(flags) do {		\
+	arch_spin_unlock(&smp_atomic_ops_lock);	\
+	local_irq_restore(flags);		\
+} while (0)
+
+#define bitops_lock(flags)	do {		\
+	local_irq_save(flags);			\
+	arch_spin_lock(&smp_bitops_lock);	\
+} while (0)
+
+#define bitops_unlock(flags) do {		\
+	arch_spin_unlock(&smp_bitops_lock);	\
+	local_irq_restore(flags);		\
+} while (0)
+
+#else /* !CONFIG_SMP */
+
+#define atomic_ops_lock(flags)		local_irq_save(flags)
+#define atomic_ops_unlock(flags)	local_irq_restore(flags)
+
+#define bitops_lock(flags)		local_irq_save(flags)
+#define bitops_unlock(flags)		local_irq_restore(flags)
+
+#endif /* !CONFIG_SMP */
+
+#endif	/* !CONFIG_ARC_HAS_LLSC */
+
+#endif
diff --git a/arch/arc/include/asm/spinlock.h b/arch/arc/include/asm/spinlock.h
new file mode 100644
index 00000000000..b6a8c2dfbe6
--- /dev/null
+++ b/arch/arc/include/asm/spinlock.h
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#include <asm/spinlock_types.h>
+#include <asm/processor.h>
+#include <asm/barrier.h>
+
+#define arch_spin_is_locked(x)	((x)->slock != __ARCH_SPIN_LOCK_UNLOCKED__)
+#define arch_spin_lock_flags(lock, flags)	arch_spin_lock(lock)
+#define arch_spin_unlock_wait(x) \
+	do { while (arch_spin_is_locked(x)) cpu_relax(); } while (0)
+
+static inline void arch_spin_lock(arch_spinlock_t *lock)
+{
+	unsigned int tmp = __ARCH_SPIN_LOCK_LOCKED__;
+
+	__asm__ __volatile__(
+	"1:	ex  %0, [%1]		\n"
+	"	breq  %0, %2, 1b	\n"
+	: "+&r" (tmp)
+	: "r"(&(lock->slock)), "ir"(__ARCH_SPIN_LOCK_LOCKED__)
+	: "memory");
+}
+
+static inline int arch_spin_trylock(arch_spinlock_t *lock)
+{
+	unsigned int tmp = __ARCH_SPIN_LOCK_LOCKED__;
+
+	__asm__ __volatile__(
+	"1:	ex  %0, [%1]		\n"
+	: "+r" (tmp)
+	: "r"(&(lock->slock))
+	: "memory");
+
+	return (tmp == __ARCH_SPIN_LOCK_UNLOCKED__);
+}
+
+static inline void arch_spin_unlock(arch_spinlock_t *lock)
+{
+	unsigned int tmp = __ARCH_SPIN_LOCK_UNLOCKED__;
+
+	__asm__ __volatile__(
+	"	ex  %0, [%1]		\n"
+	: "+r" (tmp)
+	: "r"(&(lock->slock))
+	: "memory");
+
+	smp_mb();
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers but only one writer.
+ *
+ * The spinlock itself is contained in @counter and access to it is
+ * serialized with @lock_mutex.
+ *
+ * Unfair locking as Writers could be starved indefinitely by Reader(s)
+ */
+
+/* Would read_trylock() succeed? */
+#define arch_read_can_lock(x)	((x)->counter > 0)
+
+/* Would write_trylock() succeed? */
+#define arch_write_can_lock(x)	((x)->counter == __ARCH_RW_LOCK_UNLOCKED__)
+
+/* 1 - lock taken successfully */
+static inline int arch_read_trylock(arch_rwlock_t *rw)
+{
+	int ret = 0;
+
+	arch_spin_lock(&(rw->lock_mutex));
+
+	/*
+	 * zero means writer holds the lock exclusively, deny Reader.
+	 * Otherwise grant lock to first/subseq reader
+	 */
+	if (rw->counter > 0) {
+		rw->counter--;
+		ret = 1;
+	}
+
+	arch_spin_unlock(&(rw->lock_mutex));
+
+	smp_mb();
+	return ret;
+}
+
+/* 1 - lock taken successfully */
+static inline int arch_write_trylock(arch_rwlock_t *rw)
+{
+	int ret = 0;
+
+	arch_spin_lock(&(rw->lock_mutex));
+
+	/*
+	 * If reader(s) hold lock (lock < __ARCH_RW_LOCK_UNLOCKED__),
+	 * deny writer. Otherwise if unlocked grant to writer
+	 * Hence the claim that Linux rwlocks are unfair to writers.
+	 * (can be starved for an indefinite time by readers).
+	 */
+	if (rw->counter == __ARCH_RW_LOCK_UNLOCKED__) {
+		rw->counter = 0;
+		ret = 1;
+	}
+	arch_spin_unlock(&(rw->lock_mutex));
+
+	return ret;
+}
+
+static inline void arch_read_lock(arch_rwlock_t *rw)
+{
+	while (!arch_read_trylock(rw))
+		cpu_relax();
+}
+
+static inline void arch_write_lock(arch_rwlock_t *rw)
+{
+	while (!arch_write_trylock(rw))
+		cpu_relax();
+}
+
+static inline void arch_read_unlock(arch_rwlock_t *rw)
+{
+	arch_spin_lock(&(rw->lock_mutex));
+	rw->counter++;
+	arch_spin_unlock(&(rw->lock_mutex));
+}
+
+static inline void arch_write_unlock(arch_rwlock_t *rw)
+{
+	arch_spin_lock(&(rw->lock_mutex));
+	rw->counter = __ARCH_RW_LOCK_UNLOCKED__;
+	arch_spin_unlock(&(rw->lock_mutex));
+}
+
+#define arch_read_lock_flags(lock, flags)	arch_read_lock(lock)
+#define arch_write_lock_flags(lock, flags)	arch_write_lock(lock)
+
+#define arch_spin_relax(lock)	cpu_relax()
+#define arch_read_relax(lock)	cpu_relax()
+#define arch_write_relax(lock)	cpu_relax()
+
+#endif /* __ASM_SPINLOCK_H */
diff --git a/arch/arc/include/asm/spinlock_types.h b/arch/arc/include/asm/spinlock_types.h
new file mode 100644
index 00000000000..662627ced4f
--- /dev/null
+++ b/arch/arc/include/asm/spinlock_types.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_SPINLOCK_TYPES_H
+#define __ASM_SPINLOCK_TYPES_H
+
+typedef struct {
+	volatile unsigned int slock;
+} arch_spinlock_t;
+
+#define __ARCH_SPIN_LOCK_UNLOCKED__	0
+#define __ARCH_SPIN_LOCK_LOCKED__	1
+
+#define __ARCH_SPIN_LOCK_UNLOCKED	{ __ARCH_SPIN_LOCK_UNLOCKED__ }
+#define __ARCH_SPIN_LOCK_LOCKED		{ __ARCH_SPIN_LOCK_LOCKED__ }
+
+/*
+ * Unlocked     : 0x0100_0000
+ * Read lock(s) : 0x00FF_FFFF to 0x01  (Multiple Readers decrement it)
+ * Write lock   : 0x0, but only if prior value is "unlocked" 0x0100_0000
+ */
+typedef struct {
+	volatile unsigned int	counter;
+	arch_spinlock_t		lock_mutex;
+} arch_rwlock_t;
+
+#define __ARCH_RW_LOCK_UNLOCKED__	0x01000000
+#define __ARCH_RW_LOCK_UNLOCKED		{ .counter = __ARCH_RW_LOCK_UNLOCKED__ }
+
+#endif
diff --git a/arch/arc/include/asm/string.h b/arch/arc/include/asm/string.h
new file mode 100644
index 00000000000..87676c8f141
--- /dev/null
+++ b/arch/arc/include/asm/string.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * vineetg: May 2011
+ *  -We had half-optimised memset/memcpy, got better versions of those
+ *  -Added memcmp, strchr, strcpy, strcmp, strlen
+ *
+ * Amit Bhor: Codito Technologies 2004
+ */
+
+#ifndef _ASM_ARC_STRING_H
+#define _ASM_ARC_STRING_H
+
+#include <linux/types.h>
+
+#ifdef __KERNEL__
+
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMCMP
+#define __HAVE_ARCH_STRCHR
+#define __HAVE_ARCH_STRCPY
+#define __HAVE_ARCH_STRCMP
+#define __HAVE_ARCH_STRLEN
+
+extern void *memset(void *ptr, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void memzero(void *ptr, __kernel_size_t n);
+extern int memcmp(const void *, const void *, __kernel_size_t);
+extern char *strchr(const char *s, int c);
+extern char *strcpy(char *dest, const char *src);
+extern int strcmp(const char *cs, const char *ct);
+extern __kernel_size_t strlen(const char *);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_ARC_STRING_H */
diff --git a/arch/arc/include/asm/switch_to.h b/arch/arc/include/asm/switch_to.h
new file mode 100644
index 00000000000..1b171ab5fec
--- /dev/null
+++ b/arch/arc/include/asm/switch_to.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_SWITCH_TO_H
+#define _ASM_ARC_SWITCH_TO_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+
+#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
+
+extern void fpu_save_restore(struct task_struct *p, struct task_struct *n);
+#define ARC_FPU_PREV(p, n)	fpu_save_restore(p, n)
+#define ARC_FPU_NEXT(t)
+
+#else
+
+#define ARC_FPU_PREV(p, n)
+#define ARC_FPU_NEXT(n)
+
+#endif /* !CONFIG_ARC_FPU_SAVE_RESTORE */
+
+struct task_struct *__switch_to(struct task_struct *p, struct task_struct *n);
+
+#define switch_to(prev, next, last)	\
+do {					\
+	ARC_FPU_PREV(prev, next);	\
+	last = __switch_to(prev, next);\
+	ARC_FPU_NEXT(next);		\
+	mb();				\
+} while (0)
+
+#endif
+
+#endif
diff --git a/arch/arc/include/asm/syscall.h b/arch/arc/include/asm/syscall.h
new file mode 100644
index 00000000000..29de0980430
--- /dev/null
+++ b/arch/arc/include/asm/syscall.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_SYSCALL_H
+#define _ASM_ARC_SYSCALL_H  1
+
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <asm/unistd.h>
+#include <asm/ptrace.h>		/* in_syscall() */
+
+static inline long
+syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
+{
+	if (user_mode(regs) && in_syscall(regs))
+		return regs->r8;
+	else
+		return -1;
+}
+
+static inline void
+syscall_rollback(struct task_struct *task, struct pt_regs *regs)
+{
+	regs->r0 = regs->orig_r0;
+}
+
+static inline long
+syscall_get_error(struct task_struct *task, struct pt_regs *regs)
+{
+	/* 0 if syscall succeeded, otherwise -Errorcode */
+	return IS_ERR_VALUE(regs->r0) ? regs->r0 : 0;
+}
+
+static inline long
+syscall_get_return_value(struct task_struct *task, struct pt_regs *regs)
+{
+	return regs->r0;
+}
+
+static inline void
+syscall_set_return_value(struct task_struct *task, struct pt_regs *regs,
+			 int error, long val)
+{
+	regs->r0 = (long) error ?: val;
+}
+
+/*
+ * @i:      argument index [0,5]
+ * @n:      number of arguments; n+i must be [1,6].
+ */
+static inline void
+syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
+		      unsigned int i, unsigned int n, unsigned long *args)
+{
+	unsigned long *inside_ptregs = &(regs->r0);
+	inside_ptregs -= i;
+
+	BUG_ON((i + n) > 6);
+
+	while (n--) {
+		args[i++] = (*inside_ptregs);
+		inside_ptregs--;
+	}
+}
+
+#endif
diff --git a/arch/arc/include/asm/syscalls.h b/arch/arc/include/asm/syscalls.h
new file mode 100644
index 00000000000..dd785befe7f
--- /dev/null
+++ b/arch/arc/include/asm/syscalls.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_SYSCALLS_H
+#define _ASM_ARC_SYSCALLS_H  1
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+
+int sys_clone_wrapper(int, int, int, int, int);
+int sys_cacheflush(uint32_t, uint32_t uint32_t);
+int sys_arc_settls(void *);
+int sys_arc_gettls(void);
+
+#include <asm-generic/syscalls.h>
+
+#endif	/* __KERNEL__ */
+
+#endif
diff --git a/arch/arc/include/asm/thread_info.h b/arch/arc/include/asm/thread_info.h
new file mode 100644
index 00000000000..45be2167201
--- /dev/null
+++ b/arch/arc/include/asm/thread_info.h
@@ -0,0 +1,119 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Vineetg: Oct 2009
+ *  No need for ARC specific thread_info allocator (kmalloc/free). This is
+ *  anyways one page allocation, thus slab alloc can be short-circuited and
+ *  the generic version (get_free_page) would be loads better.
+ *
+ * Sameer Dhavale: Codito Technologies 2004
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#include <asm/page.h>
+
+#ifdef CONFIG_16KSTACKS
+#define THREAD_SIZE_ORDER 1
+#else
+#define THREAD_SIZE_ORDER 0
+#endif
+
+#define THREAD_SIZE     (PAGE_SIZE << THREAD_SIZE_ORDER)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/thread_info.h>
+#include <asm/segment.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ *   must also be changed
+ */
+struct thread_info {
+	unsigned long flags;		/* low level flags */
+	int preempt_count;		/* 0 => preemptable, <0 => BUG */
+	struct task_struct *task;	/* main task structure */
+	mm_segment_t addr_limit;	/* thread address space */
+	struct exec_domain *exec_domain;/* execution domain */
+	__u32 cpu;			/* current CPU */
+	unsigned long thr_ptr;		/* TLS ptr */
+	struct restart_block restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task       = &tsk,			\
+	.exec_domain    = &default_exec_domain,	\
+	.flags      = 0,			\
+	.cpu        = 0,			\
+	.preempt_count  = INIT_PREEMPT_COUNT,	\
+	.addr_limit = KERNEL_DS,		\
+	.restart_block  = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info    (init_thread_union.thread_info)
+#define init_stack          (init_thread_union.stack)
+
+static inline __attribute_const__ struct thread_info *current_thread_info(void)
+{
+	register unsigned long sp asm("sp");
+	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to
+ *   access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_RESTORE_SIGMASK	0	/* restore sig mask in do_signal() */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_SYSCALL_AUDIT	4	/* syscall auditing active */
+#define TIF_SYSCALL_TRACE	15	/* syscall trace active */
+
+/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		16
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_MEMDIE		(1<<TIF_MEMDIE)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
+				 _TIF_NOTIFY_RESUME)
+
+/*
+ * _TIF_ALLWORK_MASK includes SYSCALL_TRACE, but we don't need it.
+ * SYSCALL_TRACE is anways seperately/unconditionally tested right after a
+ * syscall, so all that reamins to be tested is _TIF_WORK_MASK
+ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/arc/include/asm/timex.h b/arch/arc/include/asm/timex.h
new file mode 100644
index 00000000000..0a82960a75e
--- /dev/null
+++ b/arch/arc/include/asm/timex.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_TIMEX_H
+#define _ASM_ARC_TIMEX_H
+
+#define CLOCK_TICK_RATE	80000000 /* slated to be removed */
+
+#include <asm-generic/timex.h>
+
+/* XXX: get_cycles() to be implemented with RTSC insn */
+
+#endif /* _ASM_ARC_TIMEX_H */
diff --git a/arch/arc/include/asm/tlb-mmu1.h b/arch/arc/include/asm/tlb-mmu1.h
new file mode 100644
index 00000000000..8a1ec96012a
--- /dev/null
+++ b/arch/arc/include/asm/tlb-mmu1.h
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_TLB_MMU_V1_H__
+#define __ASM_TLB_MMU_V1_H__
+
+#include <asm/mmu.h>
+
+#if defined(__ASSEMBLY__) && (CONFIG_ARC_MMU_VER == 1)
+
+.macro TLB_WRITE_HEURISTICS
+
+#define JH_HACK1
+#undef JH_HACK2
+#undef JH_HACK3
+
+#ifdef JH_HACK3
+; Calculate set index for 2-way MMU
+; -avoiding use of GetIndex from MMU
+;   and its unpleasant LFSR pseudo-random sequence
+;
+; r1 = TLBPD0 from TLB_RELOAD above
+;
+; -- jh_ex_way_set not cleared on startup
+;    didn't want to change setup.c
+;    hence extra instruction to clean
+;
+; -- should be in cache since in same line
+;    as r0/r1 saves above
+;
+ld  r0,[jh_ex_way_sel]  ; victim pointer
+and r0,r0,1         ; clean
+xor.f   r0,r0,1         ; flip
+st  r0,[jh_ex_way_sel]  ; store back
+asr r0,r1,12        ; get set # <<1, note bit 12=R=0
+or.nz   r0,r0,1         ; set way bit
+and r0,r0,0xff      ; clean
+sr  r0,[ARC_REG_TLBINDEX]
+#endif
+
+#ifdef JH_HACK2
+; JH hack #2
+;  Faster than hack #1 in non-thrash case, but hard-coded for 2-way MMU
+;  Slower in thrash case (where it matters) because more code is executed
+;  Inefficient due to two-register paradigm of this miss handler
+;
+/* r1 = data TLBPD0 at this point */
+lr      r0,[eret]               /* instruction address */
+xor     r0,r0,r1                /* compare set #       */
+and.f   r0,r0,0x000fe000        /* 2-way MMU mask      */
+bne     88f                     /* not in same set - no need to probe */
+
+lr      r0,[eret]               /* instruction address */
+and     r0,r0,PAGE_MASK         /* VPN of instruction address */
+; lr  r1,[ARC_REG_TLBPD0]     /* Data VPN+ASID - already in r1 from TLB_RELOAD*/
+and     r1,r1,0xff              /* Data ASID */
+or      r0,r0,r1                /* Instruction address + Data ASID */
+
+lr      r1,[ARC_REG_TLBPD0]     /* save TLBPD0 containing data TLB*/
+sr      r0,[ARC_REG_TLBPD0]     /* write instruction address to TLBPD0 */
+sr      TLBProbe, [ARC_REG_TLBCOMMAND] /* Look for instruction */
+lr      r0,[ARC_REG_TLBINDEX]   /* r0 = index where instruction is, if at all */
+sr      r1,[ARC_REG_TLBPD0]     /* restore TLBPD0 */
+
+xor     r0,r0,1                 /* flip bottom bit of data index */
+b.d     89f
+sr      r0,[ARC_REG_TLBINDEX]   /* and put it back */
+88:
+sr  TLBGetIndex, [ARC_REG_TLBCOMMAND]
+89:
+#endif
+
+#ifdef JH_HACK1
+;
+; Always checks whether instruction will be kicked out by dtlb miss
+;
+mov_s   r3, r1                  ; save PD0 prepared by TLB_RELOAD in r3
+lr      r0,[eret]               /* instruction address */
+and     r0,r0,PAGE_MASK         /* VPN of instruction address */
+bmsk    r1,r3,7                 /* Data ASID, bits 7-0 */
+or_s    r0,r0,r1                /* Instruction address + Data ASID */
+
+sr      r0,[ARC_REG_TLBPD0]     /* write instruction address to TLBPD0 */
+sr      TLBProbe, [ARC_REG_TLBCOMMAND] /* Look for instruction */
+lr      r0,[ARC_REG_TLBINDEX]   /* r0 = index where instruction is, if at all */
+sr      r3,[ARC_REG_TLBPD0]     /* restore TLBPD0 */
+
+sr      TLBGetIndex, [ARC_REG_TLBCOMMAND]
+lr      r1,[ARC_REG_TLBINDEX]   /* r1 = index where MMU wants to put data */
+cmp     r0,r1                   /* if no match on indices, go around */
+xor.eq  r1,r1,1                 /* flip bottom bit of data index */
+sr      r1,[ARC_REG_TLBINDEX]   /* and put it back */
+#endif
+
+.endm
+
+#endif
+
+#endif
diff --git a/arch/arc/include/asm/tlb.h b/arch/arc/include/asm/tlb.h
new file mode 100644
index 00000000000..a9db5f62aaf
--- /dev/null
+++ b/arch/arc/include/asm/tlb.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_TLB_H
+#define _ASM_ARC_TLB_H
+
+#define tlb_flush(tlb)				\
+do {						\
+	if (tlb->fullmm)			\
+		flush_tlb_mm((tlb)->mm);	\
+} while (0)
+
+/*
+ * This pair is called at time of munmap/exit to flush cache and TLB entries
+ * for mappings being torn down.
+ * 1) cache-flush part -implemented via tlb_start_vma( ) for VIPT aliasing D$
+ * 2) tlb-flush part - implemted via tlb_end_vma( ) flushes the TLB range
+ *
+ * Note, read http://lkml.org/lkml/2004/1/15/6
+ */
+#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING
+#define tlb_start_vma(tlb, vma)
+#else
+#define tlb_start_vma(tlb, vma)						\
+do {									\
+	if (!tlb->fullmm)						\
+		flush_cache_range(vma, vma->vm_start, vma->vm_end);	\
+} while(0)
+#endif
+
+#define tlb_end_vma(tlb, vma)						\
+do {									\
+	if (!tlb->fullmm)						\
+		flush_tlb_range(vma, vma->vm_start, vma->vm_end);	\
+} while (0)
+
+#define __tlb_remove_tlb_entry(tlb, ptep, address)
+
+#include <linux/pagemap.h>
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_ARC_TLB_H */
diff --git a/arch/arc/include/asm/tlbflush.h b/arch/arc/include/asm/tlbflush.h
new file mode 100644
index 00000000000..71c7b2e4b87
--- /dev/null
+++ b/arch/arc/include/asm/tlbflush.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARC_TLBFLUSH__
+#define __ASM_ARC_TLBFLUSH__
+
+#include <linux/mm.h>
+
+void local_flush_tlb_all(void);
+void local_flush_tlb_mm(struct mm_struct *mm);
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
+void local_flush_tlb_kernel_range(unsigned long start, unsigned long end);
+void local_flush_tlb_range(struct vm_area_struct *vma,
+			   unsigned long start, unsigned long end);
+
+#ifndef CONFIG_SMP
+#define flush_tlb_range(vma, s, e)	local_flush_tlb_range(vma, s, e)
+#define flush_tlb_page(vma, page)	local_flush_tlb_page(vma, page)
+#define flush_tlb_kernel_range(s, e)	local_flush_tlb_kernel_range(s, e)
+#define flush_tlb_all()			local_flush_tlb_all()
+#define flush_tlb_mm(mm)		local_flush_tlb_mm(mm)
+#else
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+							 unsigned long end);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+#endif /* CONFIG_SMP */
+#endif
diff --git a/arch/arc/include/asm/uaccess.h b/arch/arc/include/asm/uaccess.h
new file mode 100644
index 00000000000..30c9baffa96
--- /dev/null
+++ b/arch/arc/include/asm/uaccess.h
@@ -0,0 +1,751 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * vineetg: June 2010
+ *    -__clear_user( ) called multiple times during elf load was byte loop
+ *    converted to do as much word clear as possible.
+ *
+ * vineetg: Dec 2009
+ *    -Hand crafted constant propagation for "constant" copy sizes
+ *    -stock kernel shrunk by 33K at -O3
+ *
+ * vineetg: Sept 2009
+ *    -Added option to (UN)inline copy_(to|from)_user to reduce code sz
+ *    -kernel shrunk by 200K even at -O3 (gcc 4.2.1)
+ *    -Enabled when doing -Os
+ *
+ * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
+ */
+
+#ifndef _ASM_ARC_UACCESS_H
+#define _ASM_ARC_UACCESS_H
+
+#include <linux/sched.h>
+#include <asm/errno.h>
+#include <linux/string.h>	/* for generic string functions */
+
+
+#define __kernel_ok		(segment_eq(get_fs(), KERNEL_DS))
+
+/*
+ * Algorthmically, for __user_ok() we want do:
+ * 	(start < TASK_SIZE) && (start+len < TASK_SIZE)
+ * where TASK_SIZE could either be retrieved from thread_info->addr_limit or
+ * emitted directly in code.
+ *
+ * This can however be rewritten as follows:
+ *	(len <= TASK_SIZE) && (start+len < TASK_SIZE)
+ *
+ * Because it essentially checks if buffer end is within limit and @len is
+ * non-ngeative, which implies that buffer start will be within limit too.
+ *
+ * The reason for rewriting being, for majority of cases, @len is generally
+ * compile time constant, causing first sub-expression to be compile time
+ * subsumed.
+ *
+ * The second part would generate weird large LIMMs e.g. (0x6000_0000 - 0x10),
+ * so we check for TASK_SIZE using get_fs() since the addr_limit load from mem
+ * would already have been done at this call site for __kernel_ok()
+ *
+ */
+#define __user_ok(addr, sz)	(((sz) <= TASK_SIZE) && \
+				 ((addr) <= (get_fs() - (sz))))
+#define __access_ok(addr, sz)	(unlikely(__kernel_ok) || \
+				 likely(__user_ok((addr), (sz))))
+
+/*********** Single byte/hword/word copies ******************/
+
+#define __get_user_fn(sz, u, k)					\
+({								\
+	long __ret = 0;	/* success by default */	\
+	switch (sz) {						\
+	case 1: __arc_get_user_one(*(k), u, "ldb", __ret); break;	\
+	case 2: __arc_get_user_one(*(k), u, "ldw", __ret); break;	\
+	case 4: __arc_get_user_one(*(k), u, "ld", __ret);  break;	\
+	case 8: __arc_get_user_one_64(*(k), u, __ret);     break;	\
+	}							\
+	__ret;							\
+})
+
+/*
+ * Returns 0 on success, -EFAULT if not.
+ * @ret already contains 0 - given that errors will be less likely
+ * (hence +r asm constraint below).
+ * In case of error, fixup code will make it -EFAULT
+ */
+#define __arc_get_user_one(dst, src, op, ret)	\
+	__asm__ __volatile__(                   \
+	"1:	"op"    %1,[%2]\n"		\
+	"2:	;nop\n"				\
+	"	.section .fixup, \"ax\"\n"	\
+	"	.align 4\n"			\
+	"3:	mov %0, %3\n"			\
+	"	j   2b\n"			\
+	"	.previous\n"			\
+	"	.section __ex_table, \"a\"\n"	\
+	"	.align 4\n"			\
+	"	.word 1b,3b\n"			\
+	"	.previous\n"			\
+						\
+	: "+r" (ret), "=r" (dst)		\
+	: "r" (src), "ir" (-EFAULT))
+
+#define __arc_get_user_one_64(dst, src, ret)	\
+	__asm__ __volatile__(                   \
+	"1:	ld   %1,[%2]\n"			\
+	"4:	ld  %R1,[%2, 4]\n"		\
+	"2:	;nop\n"				\
+	"	.section .fixup, \"ax\"\n"	\
+	"	.align 4\n"			\
+	"3:	mov %0, %3\n"			\
+	"	j   2b\n"			\
+	"	.previous\n"			\
+	"	.section __ex_table, \"a\"\n"	\
+	"	.align 4\n"			\
+	"	.word 1b,3b\n"			\
+	"	.word 4b,3b\n"			\
+	"	.previous\n"			\
+						\
+	: "+r" (ret), "=r" (dst)		\
+	: "r" (src), "ir" (-EFAULT))
+
+#define __put_user_fn(sz, u, k)					\
+({								\
+	long __ret = 0;	/* success by default */	\
+	switch (sz) {						\
+	case 1: __arc_put_user_one(*(k), u, "stb", __ret); break;	\
+	case 2: __arc_put_user_one(*(k), u, "stw", __ret); break;	\
+	case 4: __arc_put_user_one(*(k), u, "st", __ret);  break;	\
+	case 8: __arc_put_user_one_64(*(k), u, __ret);     break;	\
+	}							\
+	__ret;							\
+})
+
+#define __arc_put_user_one(src, dst, op, ret)	\
+	__asm__ __volatile__(                   \
+	"1:	"op"    %1,[%2]\n"		\
+	"2:	;nop\n"				\
+	"	.section .fixup, \"ax\"\n"	\
+	"	.align 4\n"			\
+	"3:	mov %0, %3\n"			\
+	"	j   2b\n"			\
+	"	.previous\n"			\
+	"	.section __ex_table, \"a\"\n"	\
+	"	.align 4\n"			\
+	"	.word 1b,3b\n"			\
+	"	.previous\n"			\
+						\
+	: "+r" (ret)				\
+	: "r" (src), "r" (dst), "ir" (-EFAULT))
+
+#define __arc_put_user_one_64(src, dst, ret)	\
+	__asm__ __volatile__(                   \
+	"1:	st   %1,[%2]\n"			\
+	"4:	st  %R1,[%2, 4]\n"		\
+	"2:	;nop\n"				\
+	"	.section .fixup, \"ax\"\n"	\
+	"	.align 4\n"			\
+	"3:	mov %0, %3\n"			\
+	"	j   2b\n"			\
+	"	.previous\n"			\
+	"	.section __ex_table, \"a\"\n"	\
+	"	.align 4\n"			\
+	"	.word 1b,3b\n"			\
+	"	.word 4b,3b\n"			\
+	"	.previous\n"			\
+						\
+	: "+r" (ret)				\
+	: "r" (src), "r" (dst), "ir" (-EFAULT))
+
+
+static inline unsigned long
+__arc_copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	long res = 0;
+	char val;
+	unsigned long tmp1, tmp2, tmp3, tmp4;
+	unsigned long orig_n = n;
+
+	if (n == 0)
+		return 0;
+
+	/* unaligned */
+	if (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3)) {
+
+		unsigned char tmp;
+
+		__asm__ __volatile__ (
+		"	mov.f   lp_count, %0		\n"
+		"	lpnz 2f				\n"
+		"1:	ldb.ab  %1, [%3, 1]		\n"
+		"	stb.ab  %1, [%2, 1]		\n"
+		"	sub     %0,%0,1			\n"
+		"2:	;nop				\n"
+		"	.section .fixup, \"ax\"		\n"
+		"	.align 4			\n"
+		"3:	j   2b				\n"
+		"	.previous			\n"
+		"	.section __ex_table, \"a\"	\n"
+		"	.align 4			\n"
+		"	.word   1b, 3b			\n"
+		"	.previous			\n"
+
+		: "+r" (n),
+		/*
+		 * Note as an '&' earlyclobber operand to make sure the
+		 * temporary register inside the loop is not the same as
+		 *  FROM or TO.
+		*/
+		  "=&r" (tmp), "+r" (to), "+r" (from)
+		:
+		: "lp_count", "lp_start", "lp_end", "memory");
+
+		return n;
+	}
+
+	/*
+	 * Hand-crafted constant propagation to reduce code sz of the
+	 * laddered copy 16x,8,4,2,1
+	 */
+	if (__builtin_constant_p(orig_n)) {
+		res = orig_n;
+
+		if (orig_n / 16) {
+			orig_n = orig_n % 16;
+
+			__asm__ __volatile__(
+			"	lsr   lp_count, %7,4		\n"
+			"	lp    3f			\n"
+			"1:	ld.ab   %3, [%2, 4]		\n"
+			"11:	ld.ab   %4, [%2, 4]		\n"
+			"12:	ld.ab   %5, [%2, 4]		\n"
+			"13:	ld.ab   %6, [%2, 4]		\n"
+			"	st.ab   %3, [%1, 4]		\n"
+			"	st.ab   %4, [%1, 4]		\n"
+			"	st.ab   %5, [%1, 4]		\n"
+			"	st.ab   %6, [%1, 4]		\n"
+			"	sub     %0,%0,16		\n"
+			"3:	;nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   3b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   1b, 4b			\n"
+			"	.word   11b,4b			\n"
+			"	.word   12b,4b			\n"
+			"	.word   13b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from),
+			  "=r"(tmp1), "=r"(tmp2), "=r"(tmp3), "=r"(tmp4)
+			: "ir"(n)
+			: "lp_count", "memory");
+		}
+		if (orig_n / 8) {
+			orig_n = orig_n % 8;
+
+			__asm__ __volatile__(
+			"14:	ld.ab   %3, [%2,4]		\n"
+			"15:	ld.ab   %4, [%2,4]		\n"
+			"	st.ab   %3, [%1,4]		\n"
+			"	st.ab   %4, [%1,4]		\n"
+			"	sub     %0,%0,8			\n"
+			"31:	;nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   31b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   14b,4b			\n"
+			"	.word   15b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from),
+			  "=r"(tmp1), "=r"(tmp2)
+			:
+			: "memory");
+		}
+		if (orig_n / 4) {
+			orig_n = orig_n % 4;
+
+			__asm__ __volatile__(
+			"16:	ld.ab   %3, [%2,4]		\n"
+			"	st.ab   %3, [%1,4]		\n"
+			"	sub     %0,%0,4			\n"
+			"32:	;nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   32b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   16b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1)
+			:
+			: "memory");
+		}
+		if (orig_n / 2) {
+			orig_n = orig_n % 2;
+
+			__asm__ __volatile__(
+			"17:	ldw.ab   %3, [%2,2]		\n"
+			"	stw.ab   %3, [%1,2]		\n"
+			"	sub      %0,%0,2		\n"
+			"33:	;nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   33b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   17b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1)
+			:
+			: "memory");
+		}
+		if (orig_n & 1) {
+			__asm__ __volatile__(
+			"18:	ldb.ab   %3, [%2,2]		\n"
+			"	stb.ab   %3, [%1,2]		\n"
+			"	sub      %0,%0,1		\n"
+			"34:	; nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   34b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   18b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1)
+			:
+			: "memory");
+		}
+	} else {  /* n is NOT constant, so laddered copy of 16x,8,4,2,1  */
+
+		__asm__ __volatile__(
+		"	mov %0,%3			\n"
+		"	lsr.f   lp_count, %3,4		\n"  /* 16x bytes */
+		"	lpnz    3f			\n"
+		"1:	ld.ab   %5, [%2, 4]		\n"
+		"11:	ld.ab   %6, [%2, 4]		\n"
+		"12:	ld.ab   %7, [%2, 4]		\n"
+		"13:	ld.ab   %8, [%2, 4]		\n"
+		"	st.ab   %5, [%1, 4]		\n"
+		"	st.ab   %6, [%1, 4]		\n"
+		"	st.ab   %7, [%1, 4]		\n"
+		"	st.ab   %8, [%1, 4]		\n"
+		"	sub     %0,%0,16		\n"
+		"3:	and.f   %3,%3,0xf		\n"  /* stragglers */
+		"	bz      34f			\n"
+		"	bbit0   %3,3,31f		\n"  /* 8 bytes left */
+		"14:	ld.ab   %5, [%2,4]		\n"
+		"15:	ld.ab   %6, [%2,4]		\n"
+		"	st.ab   %5, [%1,4]		\n"
+		"	st.ab   %6, [%1,4]		\n"
+		"	sub.f   %0,%0,8			\n"
+		"31:	bbit0   %3,2,32f		\n"  /* 4 bytes left */
+		"16:	ld.ab   %5, [%2,4]		\n"
+		"	st.ab   %5, [%1,4]		\n"
+		"	sub.f   %0,%0,4			\n"
+		"32:	bbit0   %3,1,33f		\n"  /* 2 bytes left */
+		"17:	ldw.ab  %5, [%2,2]		\n"
+		"	stw.ab  %5, [%1,2]		\n"
+		"	sub.f   %0,%0,2			\n"
+		"33:	bbit0   %3,0,34f		\n"
+		"18:	ldb.ab  %5, [%2,1]		\n"  /* 1 byte left */
+		"	stb.ab  %5, [%1,1]		\n"
+		"	sub.f   %0,%0,1			\n"
+		"34:	;nop				\n"
+		"	.section .fixup, \"ax\"		\n"
+		"	.align 4			\n"
+		"4:	j   34b				\n"
+		"	.previous			\n"
+		"	.section __ex_table, \"a\"	\n"
+		"	.align 4			\n"
+		"	.word   1b, 4b			\n"
+		"	.word   11b,4b			\n"
+		"	.word   12b,4b			\n"
+		"	.word   13b,4b			\n"
+		"	.word   14b,4b			\n"
+		"	.word   15b,4b			\n"
+		"	.word   16b,4b			\n"
+		"	.word   17b,4b			\n"
+		"	.word   18b,4b			\n"
+		"	.previous			\n"
+		: "=r" (res), "+r"(to), "+r"(from), "+r"(n), "=r"(val),
+		  "=r"(tmp1), "=r"(tmp2), "=r"(tmp3), "=r"(tmp4)
+		:
+		: "lp_count", "memory");
+	}
+
+	return res;
+}
+
+extern unsigned long slowpath_copy_to_user(void __user *to, const void *from,
+					   unsigned long n);
+
+static inline unsigned long
+__arc_copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	long res = 0;
+	char val;
+	unsigned long tmp1, tmp2, tmp3, tmp4;
+	unsigned long orig_n = n;
+
+	if (n == 0)
+		return 0;
+
+	/* unaligned */
+	if (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3)) {
+
+		unsigned char tmp;
+
+		__asm__ __volatile__(
+		"	mov.f   lp_count, %0		\n"
+		"	lpnz 3f				\n"
+		"	ldb.ab  %1, [%3, 1]		\n"
+		"1:	stb.ab  %1, [%2, 1]		\n"
+		"	sub     %0, %0, 1		\n"
+		"3:	;nop				\n"
+		"	.section .fixup, \"ax\"		\n"
+		"	.align 4			\n"
+		"4:	j   3b				\n"
+		"	.previous			\n"
+		"	.section __ex_table, \"a\"	\n"
+		"	.align 4			\n"
+		"	.word   1b, 4b			\n"
+		"	.previous			\n"
+
+		: "+r" (n),
+		/* Note as an '&' earlyclobber operand to make sure the
+		 * temporary register inside the loop is not the same as
+		 * FROM or TO.
+		 */
+		  "=&r" (tmp), "+r" (to), "+r" (from)
+		:
+		: "lp_count", "lp_start", "lp_end", "memory");
+
+		return n;
+	}
+
+	if (__builtin_constant_p(orig_n)) {
+		res = orig_n;
+
+		if (orig_n / 16) {
+			orig_n = orig_n % 16;
+
+			__asm__ __volatile__(
+			"	lsr lp_count, %7,4		\n"
+			"	lp  3f				\n"
+			"	ld.ab %3, [%2, 4]		\n"
+			"	ld.ab %4, [%2, 4]		\n"
+			"	ld.ab %5, [%2, 4]		\n"
+			"	ld.ab %6, [%2, 4]		\n"
+			"1:	st.ab %3, [%1, 4]		\n"
+			"11:	st.ab %4, [%1, 4]		\n"
+			"12:	st.ab %5, [%1, 4]		\n"
+			"13:	st.ab %6, [%1, 4]		\n"
+			"	sub   %0, %0, 16		\n"
+			"3:;nop					\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   3b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   1b, 4b			\n"
+			"	.word   11b,4b			\n"
+			"	.word   12b,4b			\n"
+			"	.word   13b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from),
+			  "=r"(tmp1), "=r"(tmp2), "=r"(tmp3), "=r"(tmp4)
+			: "ir"(n)
+			: "lp_count", "memory");
+		}
+		if (orig_n / 8) {
+			orig_n = orig_n % 8;
+
+			__asm__ __volatile__(
+			"	ld.ab   %3, [%2,4]		\n"
+			"	ld.ab   %4, [%2,4]		\n"
+			"14:	st.ab   %3, [%1,4]		\n"
+			"15:	st.ab   %4, [%1,4]		\n"
+			"	sub     %0, %0, 8		\n"
+			"31:;nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   31b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   14b,4b			\n"
+			"	.word   15b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from),
+			  "=r"(tmp1), "=r"(tmp2)
+			:
+			: "memory");
+		}
+		if (orig_n / 4) {
+			orig_n = orig_n % 4;
+
+			__asm__ __volatile__(
+			"	ld.ab   %3, [%2,4]		\n"
+			"16:	st.ab   %3, [%1,4]		\n"
+			"	sub     %0, %0, 4		\n"
+			"32:;nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   32b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   16b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1)
+			:
+			: "memory");
+		}
+		if (orig_n / 2) {
+			orig_n = orig_n % 2;
+
+			__asm__ __volatile__(
+			"	ldw.ab    %3, [%2,2]		\n"
+			"17:	stw.ab    %3, [%1,2]		\n"
+			"	sub       %0, %0, 2		\n"
+			"33:;nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   33b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   17b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1)
+			:
+			: "memory");
+		}
+		if (orig_n & 1) {
+			__asm__ __volatile__(
+			"	ldb.ab  %3, [%2,1]		\n"
+			"18:	stb.ab  %3, [%1,1]		\n"
+			"	sub     %0, %0, 1		\n"
+			"34:	;nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   34b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   18b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1)
+			:
+			: "memory");
+		}
+	} else {  /* n is NOT constant, so laddered copy of 16x,8,4,2,1  */
+
+		__asm__ __volatile__(
+		"	mov   %0,%3			\n"
+		"	lsr.f lp_count, %3,4		\n"  /* 16x bytes */
+		"	lpnz  3f			\n"
+		"	ld.ab %5, [%2, 4]		\n"
+		"	ld.ab %6, [%2, 4]		\n"
+		"	ld.ab %7, [%2, 4]		\n"
+		"	ld.ab %8, [%2, 4]		\n"
+		"1:	st.ab %5, [%1, 4]		\n"
+		"11:	st.ab %6, [%1, 4]		\n"
+		"12:	st.ab %7, [%1, 4]		\n"
+		"13:	st.ab %8, [%1, 4]		\n"
+		"	sub   %0, %0, 16		\n"
+		"3:	and.f %3,%3,0xf			\n" /* stragglers */
+		"	bz 34f				\n"
+		"	bbit0   %3,3,31f		\n" /* 8 bytes left */
+		"	ld.ab   %5, [%2,4]		\n"
+		"	ld.ab   %6, [%2,4]		\n"
+		"14:	st.ab   %5, [%1,4]		\n"
+		"15:	st.ab   %6, [%1,4]		\n"
+		"	sub.f   %0, %0, 8		\n"
+		"31:	bbit0   %3,2,32f		\n"  /* 4 bytes left */
+		"	ld.ab   %5, [%2,4]		\n"
+		"16:	st.ab   %5, [%1,4]		\n"
+		"	sub.f   %0, %0, 4		\n"
+		"32:	bbit0 %3,1,33f			\n"  /* 2 bytes left */
+		"	ldw.ab    %5, [%2,2]		\n"
+		"17:	stw.ab    %5, [%1,2]		\n"
+		"	sub.f %0, %0, 2			\n"
+		"33:	bbit0 %3,0,34f			\n"
+		"	ldb.ab    %5, [%2,1]		\n"  /* 1 byte left */
+		"18:	stb.ab  %5, [%1,1]		\n"
+		"	sub.f %0, %0, 1			\n"
+		"34:	;nop				\n"
+		"	.section .fixup, \"ax\"		\n"
+		"	.align 4			\n"
+		"4:	j   34b				\n"
+		"	.previous			\n"
+		"	.section __ex_table, \"a\"	\n"
+		"	.align 4			\n"
+		"	.word   1b, 4b			\n"
+		"	.word   11b,4b			\n"
+		"	.word   12b,4b			\n"
+		"	.word   13b,4b			\n"
+		"	.word   14b,4b			\n"
+		"	.word   15b,4b			\n"
+		"	.word   16b,4b			\n"
+		"	.word   17b,4b			\n"
+		"	.word   18b,4b			\n"
+		"	.previous			\n"
+		: "=r" (res), "+r"(to), "+r"(from), "+r"(n), "=r"(val),
+		  "=r"(tmp1), "=r"(tmp2), "=r"(tmp3), "=r"(tmp4)
+		:
+		: "lp_count", "memory");
+	}
+
+	return res;
+}
+
+static inline unsigned long __arc_clear_user(void __user *to, unsigned long n)
+{
+	long res = n;
+	unsigned char *d_char = to;
+
+	__asm__ __volatile__(
+	"	bbit0   %0, 0, 1f		\n"
+	"75:	stb.ab  %2, [%0,1]		\n"
+	"	sub %1, %1, 1			\n"
+	"1:	bbit0   %0, 1, 2f		\n"
+	"76:	stw.ab  %2, [%0,2]		\n"
+	"	sub %1, %1, 2			\n"
+	"2:	asr.f   lp_count, %1, 2		\n"
+	"	lpnz    3f			\n"
+	"77:	st.ab   %2, [%0,4]		\n"
+	"	sub %1, %1, 4			\n"
+	"3:	bbit0   %1, 1, 4f		\n"
+	"78:	stw.ab  %2, [%0,2]		\n"
+	"	sub %1, %1, 2			\n"
+	"4:	bbit0   %1, 0, 5f		\n"
+	"79:	stb.ab  %2, [%0,1]		\n"
+	"	sub %1, %1, 1			\n"
+	"5:					\n"
+	"	.section .fixup, \"ax\"		\n"
+	"	.align 4			\n"
+	"3:	j   5b				\n"
+	"	.previous			\n"
+	"	.section __ex_table, \"a\"	\n"
+	"	.align 4			\n"
+	"	.word   75b, 3b			\n"
+	"	.word   76b, 3b			\n"
+	"	.word   77b, 3b			\n"
+	"	.word   78b, 3b			\n"
+	"	.word   79b, 3b			\n"
+	"	.previous			\n"
+	: "+r"(d_char), "+r"(res)
+	: "i"(0)
+	: "lp_count", "lp_start", "lp_end", "memory");
+
+	return res;
+}
+
+static inline long
+__arc_strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	long res = count;
+	char val;
+	unsigned int hw_count;
+
+	if (count == 0)
+		return 0;
+
+	__asm__ __volatile__(
+	"	lp 2f		\n"
+	"1:	ldb.ab  %3, [%2, 1]		\n"
+	"	breq.d  %3, 0, 2f		\n"
+	"	stb.ab  %3, [%1, 1]		\n"
+	"2:	sub %0, %6, %4			\n"
+	"3:	;nop				\n"
+	"	.section .fixup, \"ax\"		\n"
+	"	.align 4			\n"
+	"4:	mov %0, %5			\n"
+	"	j   3b				\n"
+	"	.previous			\n"
+	"	.section __ex_table, \"a\"	\n"
+	"	.align 4			\n"
+	"	.word   1b, 4b			\n"
+	"	.previous			\n"
+	: "=r"(res), "+r"(dst), "+r"(src), "=&r"(val), "=l"(hw_count)
+	: "g"(-EFAULT), "ir"(count), "4"(count)	/* this "4" seeds lp_count */
+	: "memory");
+
+	return res;
+}
+
+static inline long __arc_strnlen_user(const char __user *s, long n)
+{
+	long res, tmp1, cnt;
+	char val;
+
+	__asm__ __volatile__(
+	"	mov %2, %1			\n"
+	"1:	ldb.ab  %3, [%0, 1]		\n"
+	"	breq.d  %3, 0, 2f		\n"
+	"	sub.f   %2, %2, 1		\n"
+	"	bnz 1b				\n"
+	"	sub %2, %2, 1			\n"
+	"2:	sub %0, %1, %2			\n"
+	"3:	;nop				\n"
+	"	.section .fixup, \"ax\"		\n"
+	"	.align 4			\n"
+	"4:	mov %0, 0			\n"
+	"	j   3b				\n"
+	"	.previous			\n"
+	"	.section __ex_table, \"a\"	\n"
+	"	.align 4			\n"
+	"	.word 1b, 4b			\n"
+	"	.previous			\n"
+	: "=r"(res), "=r"(tmp1), "=r"(cnt), "=r"(val)
+	: "0"(s), "1"(n)
+	: "memory");
+
+	return res;
+}
+
+#ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
+#define __copy_from_user(t, f, n)	__arc_copy_from_user(t, f, n)
+#define __copy_to_user(t, f, n)		__arc_copy_to_user(t, f, n)
+#define __clear_user(d, n)		__arc_clear_user(d, n)
+#define __strncpy_from_user(d, s, n)	__arc_strncpy_from_user(d, s, n)
+#define __strnlen_user(s, n)		__arc_strnlen_user(s, n)
+#else
+extern long arc_copy_from_user_noinline(void *to, const void __user * from,
+		unsigned long n);
+extern long arc_copy_to_user_noinline(void __user *to, const void *from,
+		unsigned long n);
+extern unsigned long arc_clear_user_noinline(void __user *to,
+		unsigned long n);
+extern long arc_strncpy_from_user_noinline (char *dst, const char __user *src,
+		long count);
+extern long arc_strnlen_user_noinline(const char __user *src, long n);
+
+#define __copy_from_user(t, f, n)	arc_copy_from_user_noinline(t, f, n)
+#define __copy_to_user(t, f, n)		arc_copy_to_user_noinline(t, f, n)
+#define __clear_user(d, n)		arc_clear_user_noinline(d, n)
+#define __strncpy_from_user(d, s, n)	arc_strncpy_from_user_noinline(d, s, n)
+#define __strnlen_user(s, n)		arc_strnlen_user_noinline(s, n)
+
+#endif
+
+#include <asm-generic/uaccess.h>
+
+extern int fixup_exception(struct pt_regs *regs);
+
+#endif
diff --git a/arch/arc/include/asm/unaligned.h b/arch/arc/include/asm/unaligned.h
new file mode 100644
index 00000000000..3e5f071bc00
--- /dev/null
+++ b/arch/arc/include/asm/unaligned.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_UNALIGNED_H
+#define _ASM_ARC_UNALIGNED_H
+
+/* ARC700 can't handle unaligned Data accesses. */
+
+#include <asm-generic/unaligned.h>
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_ARC_MISALIGN_ACCESS
+int misaligned_fixup(unsigned long address, struct pt_regs *regs,
+		     struct callee_regs *cregs);
+#else
+static inline int
+misaligned_fixup(unsigned long address, struct pt_regs *regs,
+		 struct callee_regs *cregs)
+{
+	/* Not fixed */
+	return 1;
+}
+#endif
+
+#endif /* _ASM_ARC_UNALIGNED_H */
diff --git a/arch/arc/include/asm/unwind.h b/arch/arc/include/asm/unwind.h
new file mode 100644
index 00000000000..7ca628b6ee2
--- /dev/null
+++ b/arch/arc/include/asm/unwind.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_UNWIND_H
+#define _ASM_ARC_UNWIND_H
+
+#ifdef CONFIG_ARC_DW2_UNWIND
+
+#include <linux/sched.h>
+
+struct arc700_regs {
+	unsigned long r0;
+	unsigned long r1;
+	unsigned long r2;
+	unsigned long r3;
+	unsigned long r4;
+	unsigned long r5;
+	unsigned long r6;
+	unsigned long r7;
+	unsigned long r8;
+	unsigned long r9;
+	unsigned long r10;
+	unsigned long r11;
+	unsigned long r12;
+	unsigned long r13;
+	unsigned long r14;
+	unsigned long r15;
+	unsigned long r16;
+	unsigned long r17;
+	unsigned long r18;
+	unsigned long r19;
+	unsigned long r20;
+	unsigned long r21;
+	unsigned long r22;
+	unsigned long r23;
+	unsigned long r24;
+	unsigned long r25;
+	unsigned long r26;
+	unsigned long r27;	/* fp */
+	unsigned long r28;	/* sp */
+	unsigned long r29;
+	unsigned long r30;
+	unsigned long r31;	/* blink */
+	unsigned long r63;	/* pc */
+};
+
+struct unwind_frame_info {
+	struct arc700_regs regs;
+	struct task_struct *task;
+	unsigned call_frame:1;
+};
+
+#define UNW_PC(frame)		((frame)->regs.r63)
+#define UNW_SP(frame)		((frame)->regs.r28)
+#define UNW_BLINK(frame)	((frame)->regs.r31)
+
+/* Rajesh FIXME */
+#ifdef CONFIG_FRAME_POINTER
+#define UNW_FP(frame)		((frame)->regs.r27)
+#define FRAME_RETADDR_OFFSET	4
+#define FRAME_LINK_OFFSET	0
+#define STACK_BOTTOM_UNW(tsk)	STACK_LIMIT((tsk)->thread.ksp)
+#define STACK_TOP_UNW(tsk)	((tsk)->thread.ksp)
+#else
+#define UNW_FP(frame)		((void)(frame), 0)
+#endif
+
+#define STACK_LIMIT(ptr)	(((ptr) - 1) & ~(THREAD_SIZE - 1))
+
+#define UNW_REGISTER_INFO \
+	PTREGS_INFO(r0), \
+	PTREGS_INFO(r1), \
+	PTREGS_INFO(r2), \
+	PTREGS_INFO(r3), \
+	PTREGS_INFO(r4), \
+	PTREGS_INFO(r5), \
+	PTREGS_INFO(r6), \
+	PTREGS_INFO(r7), \
+	PTREGS_INFO(r8), \
+	PTREGS_INFO(r9), \
+	PTREGS_INFO(r10), \
+	PTREGS_INFO(r11), \
+	PTREGS_INFO(r12), \
+	PTREGS_INFO(r13), \
+	PTREGS_INFO(r14), \
+	PTREGS_INFO(r15), \
+	PTREGS_INFO(r16), \
+	PTREGS_INFO(r17), \
+	PTREGS_INFO(r18), \
+	PTREGS_INFO(r19), \
+	PTREGS_INFO(r20), \
+	PTREGS_INFO(r21), \
+	PTREGS_INFO(r22), \
+	PTREGS_INFO(r23), \
+	PTREGS_INFO(r24), \
+	PTREGS_INFO(r25), \
+	PTREGS_INFO(r26), \
+	PTREGS_INFO(r27), \
+	PTREGS_INFO(r28), \
+	PTREGS_INFO(r29), \
+	PTREGS_INFO(r30), \
+	PTREGS_INFO(r31), \
+	PTREGS_INFO(r63)
+
+#define UNW_DEFAULT_RA(raItem, dataAlign) \
+	((raItem).where == Memory && !((raItem).value * (dataAlign) + 4))
+
+extern int arc_unwind(struct unwind_frame_info *frame);
+extern void arc_unwind_init(void);
+extern void arc_unwind_setup(void);
+extern void *unwind_add_table(struct module *module, const void *table_start,
+			      unsigned long table_size);
+extern void unwind_remove_table(void *handle, int init_only);
+
+static inline int
+arch_unwind_init_running(struct unwind_frame_info *info,
+			 int (*callback) (struct unwind_frame_info *info,
+					  void *arg),
+			 void *arg)
+{
+	return 0;
+}
+
+static inline int arch_unw_user_mode(const struct unwind_frame_info *info)
+{
+	return 0;
+}
+
+static inline void arch_unw_init_blocked(struct unwind_frame_info *info)
+{
+	return;
+}
+
+static inline void arch_unw_init_frame_info(struct unwind_frame_info *info,
+					    struct pt_regs *regs)
+{
+	return;
+}
+
+#else
+
+#define UNW_PC(frame) ((void)(frame), 0)
+#define UNW_SP(frame) ((void)(frame), 0)
+#define UNW_FP(frame) ((void)(frame), 0)
+
+static inline void arc_unwind_init(void)
+{
+}
+
+static inline void arc_unwind_setup(void)
+{
+}
+#define unwind_add_table(a, b, c)
+#define unwind_remove_table(a, b)
+
+#endif /* CONFIG_ARC_DW2_UNWIND */
+
+#endif /* _ASM_ARC_UNWIND_H */
diff --git a/arch/arc/include/uapi/asm/Kbuild b/arch/arc/include/uapi/asm/Kbuild
new file mode 100644
index 00000000000..f50d02df78d
--- /dev/null
+++ b/arch/arc/include/uapi/asm/Kbuild
@@ -0,0 +1,5 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+header-y += elf.h
+header-y += page.h
+header-y += cachectl.h
diff --git a/arch/arc/include/uapi/asm/byteorder.h b/arch/arc/include/uapi/asm/byteorder.h
new file mode 100644
index 00000000000..9da71d415c3
--- /dev/null
+++ b/arch/arc/include/uapi/asm/byteorder.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARC_BYTEORDER_H
+#define __ASM_ARC_BYTEORDER_H
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#include <linux/byteorder/big_endian.h>
+#else
+#include <linux/byteorder/little_endian.h>
+#endif
+
+#endif /* ASM_ARC_BYTEORDER_H */
diff --git a/arch/arc/include/uapi/asm/cachectl.h b/arch/arc/include/uapi/asm/cachectl.h
new file mode 100644
index 00000000000..51c73f0255b
--- /dev/null
+++ b/arch/arc/include/uapi/asm/cachectl.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARC_ASM_CACHECTL_H
+#define __ARC_ASM_CACHECTL_H
+
+/*
+ * ARC ABI flags defined for Android's finegrained cacheflush requirements
+ */
+#define CF_I_INV	0x0002
+#define CF_D_FLUSH	0x0010
+#define CF_D_FLUSH_INV	0x0020
+
+#define CF_DEFAULT	(CF_I_INV | CF_D_FLUSH)
+
+/*
+ * Standard flags expected by cacheflush system call users
+ */
+#define ICACHE	CF_I_INV
+#define DCACHE	CF_D_FLUSH
+#define BCACHE	(CF_I_INV | CF_D_FLUSH)
+
+#endif
diff --git a/arch/arc/include/uapi/asm/elf.h b/arch/arc/include/uapi/asm/elf.h
new file mode 100644
index 00000000000..0f99ac8fcbb
--- /dev/null
+++ b/arch/arc/include/uapi/asm/elf.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UAPI__ASM_ARC_ELF_H
+#define _UAPI__ASM_ARC_ELF_H
+
+#include <asm/ptrace.h>		/* for user_regs_struct */
+
+/* Machine specific ELF Hdr flags */
+#define EF_ARC_OSABI_MSK	0x00000f00
+#define EF_ARC_OSABI_ORIG	0x00000000   /* MUST be zero for back-compat */
+#define EF_ARC_OSABI_CURRENT	0x00000300   /* v3 (no legacy syscalls) */
+
+typedef unsigned long elf_greg_t;
+typedef unsigned long elf_fpregset_t;
+
+#define ELF_NGREG	(sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+#endif
diff --git a/arch/arc/include/uapi/asm/page.h b/arch/arc/include/uapi/asm/page.h
new file mode 100644
index 00000000000..e5d41e08240
--- /dev/null
+++ b/arch/arc/include/uapi/asm/page.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UAPI__ASM_ARC_PAGE_H
+#define _UAPI__ASM_ARC_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+#if defined(CONFIG_ARC_PAGE_SIZE_16K)
+#define PAGE_SHIFT 14
+#elif defined(CONFIG_ARC_PAGE_SIZE_4K)
+#define PAGE_SHIFT 12
+#else
+/*
+ * Default 8k
+ * done this way (instead of under CONFIG_ARC_PAGE_SIZE_8K) because adhoc
+ * user code (busybox appletlib.h) expects PAGE_SHIFT to be defined w/o
+ * using the correct uClibc header and in their build our autoconf.h is
+ * not available
+ */
+#define PAGE_SHIFT 13
+#endif
+
+#ifdef __ASSEMBLY__
+#define PAGE_SIZE	(1 << PAGE_SHIFT)
+#define PAGE_OFFSET	(0x80000000)
+#else
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)	/* Default 8K */
+#define PAGE_OFFSET	(0x80000000UL)	/* Kernel starts at 2G onwards */
+#endif
+
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+
+#endif /* _UAPI__ASM_ARC_PAGE_H */
diff --git a/arch/arc/include/uapi/asm/ptrace.h b/arch/arc/include/uapi/asm/ptrace.h
new file mode 100644
index 00000000000..76a7739aab1
--- /dev/null
+++ b/arch/arc/include/uapi/asm/ptrace.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
+ */
+
+#ifndef _UAPI__ASM_ARC_PTRACE_H
+#define _UAPI__ASM_ARC_PTRACE_H
+
+#define PTRACE_GET_THREAD_AREA	25
+
+#ifndef __ASSEMBLY__
+/*
+ * Userspace ABI: Register state needed by
+ *  -ptrace (gdbserver)
+ *  -sigcontext (SA_SIGNINFO signal frame)
+ *
+ * This is to decouple pt_regs from user-space ABI, to be able to change it
+ * w/o affecting the ABI.
+ *
+ * The intermediate pad,pad2 are relics of initial layout based on pt_regs
+ * for optimizations when copying pt_regs to/from user_regs_struct.
+ * We no longer need them, but can't be changed as they are part of ABI now.
+ *
+ * Also, sigcontext only care about the scratch regs as that is what we really
+ * save/restore for signal handling. However gdb also uses the same struct
+ * hence callee regs need to be in there too.
+*/
+struct user_regs_struct {
+
+	long pad;
+	struct {
+		long bta, lp_start, lp_end, lp_count;
+		long status32, ret, blink, fp, gp;
+		long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
+		long sp;
+	} scratch;
+	long pad2;
+	struct {
+		long r25, r24, r23, r22, r21, r20;
+		long r19, r18, r17, r16, r15, r14, r13;
+	} callee;
+	long efa;	/* break pt addr, for break points in delay slots */
+	long stop_pc;	/* give dbg stop_pc after ensuring brkpt trap */
+};
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _UAPI__ASM_ARC_PTRACE_H */
diff --git a/arch/arc/include/uapi/asm/setup.h b/arch/arc/include/uapi/asm/setup.h
new file mode 100644
index 00000000000..a6d4e44938b
--- /dev/null
+++ b/arch/arc/include/uapi/asm/setup.h
@@ -0,0 +1,6 @@
+/*
+ * setup.h is part of userspace header ABI so UAPI scripts have to generate it
+ * even if there's nothing to export - causing empty <uapi/asm/setup.h>
+ * However to prevent "patch" from discarding it we add this placeholder
+ * comment
+ */
diff --git a/arch/arc/include/uapi/asm/sigcontext.h b/arch/arc/include/uapi/asm/sigcontext.h
new file mode 100644
index 00000000000..9678a11fc15
--- /dev/null
+++ b/arch/arc/include/uapi/asm/sigcontext.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_SIGCONTEXT_H
+#define _ASM_ARC_SIGCONTEXT_H
+
+#include <asm/ptrace.h>
+
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked.
+ */
+struct sigcontext {
+	struct user_regs_struct regs;
+};
+
+#endif /* _ASM_ARC_SIGCONTEXT_H */
diff --git a/arch/arc/include/uapi/asm/signal.h b/arch/arc/include/uapi/asm/signal.h
new file mode 100644
index 00000000000..fad62f7f42d
--- /dev/null
+++ b/arch/arc/include/uapi/asm/signal.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
+ */
+
+#ifndef _ASM_ARC_SIGNAL_H
+#define _ASM_ARC_SIGNAL_H
+
+/*
+ * This is much needed for ARC sigreturn optimization.
+ * This allows uClibc to piggback the addr of a sigreturn stub in sigaction,
+ * which allows sigreturn based re-entry into kernel after handling signal.
+ * W/o this kernel needs to "synthesize" the sigreturn trampoline on user
+ * mode stack which in turn forces the following:
+ * -TLB Flush (after making the stack page executable)
+ * -Cache line Flush (to make I/D Cache lines coherent)
+ */
+#define SA_RESTORER	0x04000000
+
+#include <asm-generic/signal.h>
+
+#endif /* _ASM_ARC_SIGNAL_H */
diff --git a/arch/arc/include/uapi/asm/swab.h b/arch/arc/include/uapi/asm/swab.h
new file mode 100644
index 00000000000..095599a7319
--- /dev/null
+++ b/arch/arc/include/uapi/asm/swab.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * vineetg: May 2011
+ *  -Support single cycle endian-swap insn in ARC700 4.10
+ *
+ * vineetg: June 2009
+ *  -Better htonl implementation (5 instead of 9 ALU instructions)
+ *  -Hardware assisted single cycle bswap (Use Case of ARC custom instrn)
+ */
+
+#ifndef __ASM_ARC_SWAB_H
+#define __ASM_ARC_SWAB_H
+
+#include <linux/types.h>
+
+/* Native single cycle endian swap insn */
+#ifdef CONFIG_ARC_HAS_SWAPE
+
+#define __arch_swab32(x)		\
+({					\
+	unsigned int tmp = x;		\
+	__asm__(			\
+	"	swape	%0, %1	\n"	\
+	: "=r" (tmp)			\
+	: "r" (tmp));			\
+	tmp;				\
+})
+
+#else
+
+/* Several ways of Endian-Swap Emulation for ARC
+ * 0: kernel generic
+ * 1: ARC optimised "C"
+ * 2: ARC Custom instruction
+ */
+#define ARC_BSWAP_TYPE	1
+
+#if (ARC_BSWAP_TYPE == 1)		/******* Software only ********/
+
+/* The kernel default implementation of htonl is
+ *		return  x<<24 | x>>24 |
+ *		 (x & (__u32)0x0000ff00UL)<<8 | (x & (__u32)0x00ff0000UL)>>8;
+ *
+ * This generates 9 instructions on ARC (excluding the ld/st)
+ *
+ * 8051fd8c:	ld     r3,[r7,20]	; Mem op : Get the value to be swapped
+ * 8051fd98:	asl    r5,r3,24		; get  3rd Byte
+ * 8051fd9c:	lsr    r2,r3,24		; get  0th Byte
+ * 8051fda0:	and    r4,r3,0xff00
+ * 8051fda8:	asl    r4,r4,8		; get 1st Byte
+ * 8051fdac:	and    r3,r3,0x00ff0000
+ * 8051fdb4:	or     r2,r2,r5		; combine 0th and 3rd Bytes
+ * 8051fdb8:	lsr    r3,r3,8		; 2nd Byte at correct place in Dst Reg
+ * 8051fdbc:	or     r2,r2,r4		; combine 0,3 Bytes with 1st Byte
+ * 8051fdc0:	or     r2,r2,r3		; combine 0,3,1 Bytes with 2nd Byte
+ * 8051fdc4:	st     r2,[r1,20]	; Mem op : save result back to mem
+ *
+ * Joern suggested a better "C" algorithm which is great since
+ * (1) It is portable to any architecure
+ * (2) At the same time it takes advantage of ARC ISA (rotate intrns)
+ */
+
+#define __arch_swab32(x)					\
+({	unsigned long __in = (x), __tmp;			\
+	__tmp = __in << 8 | __in >> 24; /* ror tmp,in,24 */	\
+	__in = __in << 24 | __in >> 8; /* ror in,in,8 */	\
+	__tmp ^= __in;						\
+	__tmp &= 0xff00ff;					\
+	__tmp ^ __in;						\
+})
+
+#elif (ARC_BSWAP_TYPE == 2)	/* Custom single cycle bwap instruction */
+
+#define __arch_swab32(x)						\
+({									\
+	unsigned int tmp = x;						\
+	__asm__(							\
+	"	.extInstruction	bswap, 7, 0x00, SUFFIX_NONE, SYNTAX_2OP	\n"\
+	"	bswap  %0, %1						\n"\
+	: "=r" (tmp)							\
+	: "r" (tmp));							\
+	tmp;								\
+})
+
+#endif /* ARC_BSWAP_TYPE=zzz */
+
+#endif /* CONFIG_ARC_HAS_SWAPE */
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#define __SWAB_64_THRU_32__
+#endif
+
+#endif
diff --git a/arch/arc/include/uapi/asm/unistd.h b/arch/arc/include/uapi/asm/unistd.h
new file mode 100644
index 00000000000..39e58d1cdf9
--- /dev/null
+++ b/arch/arc/include/uapi/asm/unistd.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/******** no-legacy-syscalls-ABI *******/
+
+/*
+ * Non-typical guard macro to enable inclusion twice in ARCH sys.c
+ * That is how the Generic syscall wrapper generator works
+ */
+#if !defined(_UAPI_ASM_ARC_UNISTD_H) || defined(__SYSCALL)
+#define _UAPI_ASM_ARC_UNISTD_H
+
+#define __ARCH_WANT_SYS_EXECVE
+#define __ARCH_WANT_SYS_CLONE
+#define __ARCH_WANT_SYS_VFORK
+#define __ARCH_WANT_SYS_FORK
+
+#define sys_mmap2 sys_mmap_pgoff
+
+#include <asm-generic/unistd.h>
+
+#define NR_syscalls	__NR_syscalls
+
+/* ARC specific syscall */
+#define __NR_cacheflush		(__NR_arch_specific_syscall + 0)
+#define __NR_arc_settls		(__NR_arch_specific_syscall + 1)
+#define __NR_arc_gettls		(__NR_arch_specific_syscall + 2)
+
+__SYSCALL(__NR_cacheflush, sys_cacheflush)
+__SYSCALL(__NR_arc_settls, sys_arc_settls)
+__SYSCALL(__NR_arc_gettls, sys_arc_gettls)
+
+
+/* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */
+#define __NR_sysfs		(__NR_arch_specific_syscall + 3)
+__SYSCALL(__NR_sysfs, sys_sysfs)
+
+#undef __SYSCALL
+
+#endif
diff --git a/arch/arc/kernel/.gitignore b/arch/arc/kernel/.gitignore
new file mode 100644
index 00000000000..c5f676c3c22
--- /dev/null
+++ b/arch/arc/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
new file mode 100644
index 00000000000..8004b4fa646
--- /dev/null
+++ b/arch/arc/kernel/Makefile
@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+
+# Pass UTS_MACHINE for user_regset definition
+CFLAGS_ptrace.o		+= -DUTS_MACHINE='"$(UTS_MACHINE)"'
+
+obj-y	:= arcksyms.o setup.o irq.o time.o reset.o ptrace.o entry.o process.o
+obj-y	+= signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o clk.o
+obj-y	+= devtree.o
+
+obj-$(CONFIG_MODULES)			+= arcksyms.o module.o
+obj-$(CONFIG_SMP) 			+= smp.o
+obj-$(CONFIG_ARC_DW2_UNWIND)		+= unwind.o
+obj-$(CONFIG_KPROBES)      		+= kprobes.o
+obj-$(CONFIG_ARC_MISALIGN_ACCESS) 	+= unaligned.o
+obj-$(CONFIG_KGDB)			+= kgdb.o
+obj-$(CONFIG_ARC_METAWARE_HLINK)	+= arc_hostlink.o
+obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o
+
+obj-$(CONFIG_ARC_FPU_SAVE_RESTORE)	+= fpu.o
+CFLAGS_fpu.o   += -mdpfp
+
+ifdef CONFIG_ARC_DW2_UNWIND
+CFLAGS_ctx_sw.o += -fno-omit-frame-pointer
+obj-y += ctx_sw.o
+else
+obj-y += ctx_sw_asm.o
+endif
+
+extra-y := vmlinux.lds head.o
diff --git a/arch/arc/kernel/arc_hostlink.c b/arch/arc/kernel/arc_hostlink.c
new file mode 100644
index 00000000000..47b2a17cc52
--- /dev/null
+++ b/arch/arc/kernel/arc_hostlink.c
@@ -0,0 +1,58 @@
+/*
+ * arc_hostlink.c: Pseudo-driver for Metaware provided "hostlink" facility
+ *
+ * Allows Linux userland access to host in absence of any peripherals.
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/fs.h>		/* file_operations */
+#include <linux/miscdevice.h>
+#include <linux/mm.h>		/* VM_IO */
+#include <linux/module.h>
+#include <linux/uaccess.h>
+
+static unsigned char __HOSTLINK__[4 * PAGE_SIZE] __aligned(PAGE_SIZE);
+
+static int arc_hl_mmap(struct file *fp, struct vm_area_struct *vma)
+{
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			       vma->vm_end - vma->vm_start,
+			       vma->vm_page_prot)) {
+		pr_warn("Hostlink buffer mmap ERROR\n");
+		return -EAGAIN;
+	}
+	return 0;
+}
+
+static long arc_hl_ioctl(struct file *file, unsigned int cmd,
+			unsigned long arg)
+{
+	/* we only support, returning the physical addr to mmap in user space */
+	put_user((unsigned int)__HOSTLINK__, (int __user *)arg);
+	return 0;
+}
+
+static const struct file_operations arc_hl_fops = {
+	.unlocked_ioctl	= arc_hl_ioctl,
+	.mmap		= arc_hl_mmap,
+};
+
+static struct miscdevice arc_hl_dev = {
+	.minor	= MISC_DYNAMIC_MINOR,
+	.name	= "hostlink",
+	.fops	= &arc_hl_fops
+};
+
+static int __init arc_hl_init(void)
+{
+	pr_info("ARC Hostlink driver mmap at 0x%p\n", __HOSTLINK__);
+	return misc_register(&arc_hl_dev);
+}
+module_init(arc_hl_init);
diff --git a/arch/arc/kernel/arcksyms.c b/arch/arc/kernel/arcksyms.c
new file mode 100644
index 00000000000..4d9e77724be
--- /dev/null
+++ b/arch/arc/kernel/arcksyms.c
@@ -0,0 +1,56 @@
+/*
+ * arcksyms.c - Exporting symbols not exportable from their own sources
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+
+/* libgcc functions, not part of kernel sources */
+extern void __ashldi3(void);
+extern void __ashrdi3(void);
+extern void __divsi3(void);
+extern void __divsf3(void);
+extern void __lshrdi3(void);
+extern void __modsi3(void);
+extern void __muldi3(void);
+extern void __ucmpdi2(void);
+extern void __udivsi3(void);
+extern void __umodsi3(void);
+extern void __cmpdi2(void);
+extern void __fixunsdfsi(void);
+extern void __muldf3(void);
+extern void __divdf3(void);
+extern void __floatunsidf(void);
+extern void __floatunsisf(void);
+
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__divsi3);
+EXPORT_SYMBOL(__divsf3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__modsi3);
+EXPORT_SYMBOL(__muldi3);
+EXPORT_SYMBOL(__ucmpdi2);
+EXPORT_SYMBOL(__udivsi3);
+EXPORT_SYMBOL(__umodsi3);
+EXPORT_SYMBOL(__cmpdi2);
+EXPORT_SYMBOL(__fixunsdfsi);
+EXPORT_SYMBOL(__muldf3);
+EXPORT_SYMBOL(__divdf3);
+EXPORT_SYMBOL(__floatunsidf);
+EXPORT_SYMBOL(__floatunsisf);
+
+/* ARC optimised assembler routines */
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memcmp);
+EXPORT_SYMBOL(strchr);
+EXPORT_SYMBOL(strcpy);
+EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strlen);
diff --git a/arch/arc/kernel/asm-offsets.c b/arch/arc/kernel/asm-offsets.c
new file mode 100644
index 00000000000..6c3aa0edb9b
--- /dev/null
+++ b/arch/arc/kernel/asm-offsets.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/thread_info.h>
+#include <linux/kbuild.h>
+#include <linux/ptrace.h>
+#include <asm/hardirq.h>
+#include <asm/page.h>
+
+int main(void)
+{
+	DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
+	DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack));
+
+	BLANK();
+
+	DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
+	DEFINE(THREAD_CALLEE_REG, offsetof(struct thread_struct, callee_reg));
+	DEFINE(THREAD_FAULT_ADDR,
+	       offsetof(struct thread_struct, fault_address));
+
+	BLANK();
+
+	DEFINE(THREAD_INFO_FLAGS, offsetof(struct thread_info, flags));
+	DEFINE(THREAD_INFO_PREEMPT_COUNT,
+	       offsetof(struct thread_info, preempt_count));
+
+	BLANK();
+
+	DEFINE(TASK_ACT_MM, offsetof(struct task_struct, active_mm));
+	DEFINE(TASK_TGID, offsetof(struct task_struct, tgid));
+
+	DEFINE(MM_CTXT, offsetof(struct mm_struct, context));
+	DEFINE(MM_PGD, offsetof(struct mm_struct, pgd));
+
+	DEFINE(MM_CTXT_ASID, offsetof(mm_context_t, asid));
+
+	BLANK();
+
+	DEFINE(PT_status32, offsetof(struct pt_regs, status32));
+	DEFINE(PT_event, offsetof(struct pt_regs, event));
+	DEFINE(PT_sp, offsetof(struct pt_regs, sp));
+	DEFINE(PT_r0, offsetof(struct pt_regs, r0));
+	DEFINE(PT_r1, offsetof(struct pt_regs, r1));
+	DEFINE(PT_r2, offsetof(struct pt_regs, r2));
+	DEFINE(PT_r3, offsetof(struct pt_regs, r3));
+	DEFINE(PT_r4, offsetof(struct pt_regs, r4));
+	DEFINE(PT_r5, offsetof(struct pt_regs, r5));
+	DEFINE(PT_r6, offsetof(struct pt_regs, r6));
+	DEFINE(PT_r7, offsetof(struct pt_regs, r7));
+
+	DEFINE(SZ_CALLEE_REGS, sizeof(struct callee_regs));
+	DEFINE(SZ_PT_REGS, sizeof(struct pt_regs));
+	return 0;
+}
diff --git a/arch/arc/kernel/clk.c b/arch/arc/kernel/clk.c
new file mode 100644
index 00000000000..10c7b0b5a07
--- /dev/null
+++ b/arch/arc/kernel/clk.c
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/clk.h>
+
+unsigned long core_freq = 80000000;
+
+/*
+ * As of now we default to device-tree provided clock
+ * In future we can determine this in early boot
+ */
+int arc_set_core_freq(unsigned long freq)
+{
+	core_freq = freq;
+	return 0;
+}
diff --git a/arch/arc/kernel/ctx_sw.c b/arch/arc/kernel/ctx_sw.c
new file mode 100644
index 00000000000..c14a5bea0c7
--- /dev/null
+++ b/arch/arc/kernel/ctx_sw.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Vineetg: Aug 2009
+ *  -"C" version of lowest level context switch asm macro called by schedular
+ *   gcc doesn't generate the dward CFI info for hand written asm, hence can't
+ *   backtrace out of it (e.g. tasks sleeping in kernel).
+ *   So we cheat a bit by writing almost similar code in inline-asm.
+ *  -This is a hacky way of doing things, but there is no other simple way.
+ *   I don't want/intend to extend unwinding code to understand raw asm
+ */
+
+#include <asm/asm-offsets.h>
+#include <linux/sched.h>
+
+#define KSP_WORD_OFF 	((TASK_THREAD + THREAD_KSP) / 4)
+
+struct task_struct *__sched
+__switch_to(struct task_struct *prev_task, struct task_struct *next_task)
+{
+	unsigned int tmp;
+	unsigned int prev = (unsigned int)prev_task;
+	unsigned int next = (unsigned int)next_task;
+
+	__asm__ __volatile__(
+		/* FP/BLINK save generated by gcc (standard function prologue */
+		"st.a    r13, [sp, -4]   \n\t"
+		"st.a    r14, [sp, -4]   \n\t"
+		"st.a    r15, [sp, -4]   \n\t"
+		"st.a    r16, [sp, -4]   \n\t"
+		"st.a    r17, [sp, -4]   \n\t"
+		"st.a    r18, [sp, -4]   \n\t"
+		"st.a    r19, [sp, -4]   \n\t"
+		"st.a    r20, [sp, -4]   \n\t"
+		"st.a    r21, [sp, -4]   \n\t"
+		"st.a    r22, [sp, -4]   \n\t"
+		"st.a    r23, [sp, -4]   \n\t"
+		"st.a    r24, [sp, -4]   \n\t"
+#ifndef CONFIG_ARC_CURR_IN_REG
+		"st.a    r25, [sp, -4]   \n\t"
+#else
+		"sub     sp, sp, 4      \n\t"	/* usual r25 placeholder */
+#endif
+
+		/* set ksp of outgoing task in tsk->thread.ksp */
+#if KSP_WORD_OFF <= 255
+		"st.as   sp, [%3, %1]    \n\t"
+#else
+		/*
+		 * Workaround for NR_CPUS=4k
+		 * %1 is bigger than 255 (S9 offset for st.as)
+		 */
+		"add2    r24, %3, %1     \n\t"
+		"st      sp, [r24]       \n\t"
+#endif
+
+		"sync   \n\t"
+
+		/*
+		 * setup _current_task with incoming tsk.
+		 * optionally, set r25 to that as well
+		 * For SMP extra work to get to &_current_task[cpu]
+		 * (open coded SET_CURR_TASK_ON_CPU)
+		 */
+#ifndef CONFIG_SMP
+		"st  %2, [@_current_task]	\n\t"
+#else
+		"lr   r24, [identity]		\n\t"
+		"lsr  r24, r24, 8		\n\t"
+		"bmsk r24, r24, 7		\n\t"
+		"add2 r24, @_current_task, r24	\n\t"
+		"st   %2,  [r24]		\n\t"
+#endif
+#ifdef CONFIG_ARC_CURR_IN_REG
+		"mov r25, %2   \n\t"
+#endif
+
+		/* get ksp of incoming task from tsk->thread.ksp */
+		"ld.as  sp, [%2, %1]   \n\t"
+
+		/* start loading it's CALLEE reg file */
+
+#ifndef CONFIG_ARC_CURR_IN_REG
+		"ld.ab   r25, [sp, 4]   \n\t"
+#else
+		"add    sp, sp, 4       \n\t"
+#endif
+		"ld.ab   r24, [sp, 4]   \n\t"
+		"ld.ab   r23, [sp, 4]   \n\t"
+		"ld.ab   r22, [sp, 4]   \n\t"
+		"ld.ab   r21, [sp, 4]   \n\t"
+		"ld.ab   r20, [sp, 4]   \n\t"
+		"ld.ab   r19, [sp, 4]   \n\t"
+		"ld.ab   r18, [sp, 4]   \n\t"
+		"ld.ab   r17, [sp, 4]   \n\t"
+		"ld.ab   r16, [sp, 4]   \n\t"
+		"ld.ab   r15, [sp, 4]   \n\t"
+		"ld.ab   r14, [sp, 4]   \n\t"
+		"ld.ab   r13, [sp, 4]   \n\t"
+
+		/* last (ret value) = prev : although for ARC it mov r0, r0 */
+		"mov     %0, %3        \n\t"
+
+		/* FP/BLINK restore generated by gcc (standard func epilogue */
+
+		: "=r"(tmp)
+		: "n"(KSP_WORD_OFF), "r"(next), "r"(prev)
+		: "blink"
+	);
+
+	return (struct task_struct *)tmp;
+}
diff --git a/arch/arc/kernel/ctx_sw_asm.S b/arch/arc/kernel/ctx_sw_asm.S
new file mode 100644
index 00000000000..e248594097e
--- /dev/null
+++ b/arch/arc/kernel/ctx_sw_asm.S
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Vineetg: Aug 2009
+ *  -Moved core context switch macro out of entry.S into this file.
+ *  -This is the more "natural" hand written assembler
+ */
+
+#include <linux/linkage.h>
+#include <asm/entry.h>       /* For the SAVE_* macros */
+#include <asm/asm-offsets.h>
+
+#define KSP_WORD_OFF 	((TASK_THREAD + THREAD_KSP) / 4)
+
+;################### Low Level Context Switch ##########################
+
+	.section .sched.text,"ax",@progbits
+	.align 4
+	.global __switch_to
+	.type   __switch_to, @function
+__switch_to:
+
+	/* Save regs on kernel mode stack of task */
+	st.a    blink, [sp, -4]
+	st.a    fp, [sp, -4]
+	SAVE_CALLEE_SAVED_KERNEL
+
+	/* Save the now KSP in task->thread.ksp */
+#if KSP_WORD_OFF  <= 255
+	st.as  sp, [r0, KSP_WORD_OFF]
+#else
+	/* Workaround for NR_CPUS=4k as ST.as can only take s9 offset */
+	add2	r24, r0, KSP_WORD_OFF
+	st	sp, [r24]
+#endif
+	/*
+	* Return last task in r0 (return reg)
+	* On ARC, Return reg = First Arg reg = r0.
+	* Since we already have last task in r0,
+	* don't need to do anything special to return it
+	*/
+
+	/* hardware memory barrier */
+	sync
+
+	/*
+	 * switch to new task, contained in r1
+	 * Temp reg r3 is required to get the ptr to store val
+	 */
+	SET_CURR_TASK_ON_CPU  r1, r3
+
+	/* reload SP with kernel mode stack pointer in task->thread.ksp */
+	ld.as  sp, [r1, (TASK_THREAD + THREAD_KSP)/4]
+
+	/* restore the registers */
+	RESTORE_CALLEE_SAVED_KERNEL
+	ld.ab   fp, [sp, 4]
+	ld.ab   blink, [sp, 4]
+	j       [blink]
+
+END(__switch_to)
diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c
new file mode 100644
index 00000000000..fffdb5e41b2
--- /dev/null
+++ b/arch/arc/kernel/devtree.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Based on reduced version of METAG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#include <linux/init.h>
+#include <linux/reboot.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <asm/clk.h>
+#include <asm/mach_desc.h>
+
+static const void * __init arch_get_next_mach(const char *const **match)
+{
+	static const struct machine_desc *mdesc = __arch_info_begin;
+	const struct machine_desc *m = mdesc;
+
+	if (m >= __arch_info_end)
+		return NULL;
+
+	mdesc++;
+	*match = m->dt_compat;
+	return m;
+}
+
+/**
+ * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
+ * @dt:		virtual address pointer to dt blob
+ *
+ * If a dtb was passed to the kernel, then use it to choose the correct
+ * machine_desc and to setup the system.
+ */
+const struct machine_desc * __init setup_machine_fdt(void *dt)
+{
+	const struct machine_desc *mdesc;
+	unsigned long dt_root;
+	const void *clk;
+	int len;
+
+	if (!early_init_dt_scan(dt))
+		return NULL;
+
+	mdesc = of_flat_dt_match_machine(NULL, arch_get_next_mach);
+	if (!mdesc)
+		machine_halt();
+
+	dt_root = of_get_flat_dt_root();
+	clk = of_get_flat_dt_prop(dt_root, "clock-frequency", &len);
+	if (clk)
+		arc_set_core_freq(of_read_ulong(clk, len/4));
+
+	return mdesc;
+}
diff --git a/arch/arc/kernel/disasm.c b/arch/arc/kernel/disasm.c
new file mode 100644
index 00000000000..b8a549c4f54
--- /dev/null
+++ b/arch/arc/kernel/disasm.c
@@ -0,0 +1,538 @@
+/*
+ * several functions that help interpret ARC instructions
+ * used for unaligned accesses, kprobes and kgdb
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/kprobes.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <asm/disasm.h>
+
+#if defined(CONFIG_KGDB) || defined(CONFIG_ARC_MISALIGN_ACCESS) || \
+	defined(CONFIG_KPROBES)
+
+/* disasm_instr: Analyses instruction at addr, stores
+ * findings in *state
+ */
+void __kprobes disasm_instr(unsigned long addr, struct disasm_state *state,
+	int userspace, struct pt_regs *regs, struct callee_regs *cregs)
+{
+	int fieldA = 0;
+	int fieldC = 0, fieldCisReg = 0;
+	uint16_t word1 = 0, word0 = 0;
+	int subopcode, is_linked, op_format;
+	uint16_t *ins_ptr;
+	uint16_t ins_buf[4];
+	int bytes_not_copied = 0;
+
+	memset(state, 0, sizeof(struct disasm_state));
+
+	/* This fetches the upper part of the 32 bit instruction
+	 * in both the cases of Little Endian or Big Endian configurations. */
+	if (userspace) {
+		bytes_not_copied = copy_from_user(ins_buf,
+						(const void __user *) addr, 8);
+		if (bytes_not_copied > 6)
+			goto fault;
+		ins_ptr = ins_buf;
+	} else {
+		ins_ptr = (uint16_t *) addr;
+	}
+
+	word1 = *((uint16_t *)addr);
+
+	state->major_opcode = (word1 >> 11) & 0x1F;
+
+	/* Check if the instruction is 32 bit or 16 bit instruction */
+	if (state->major_opcode < 0x0B) {
+		if (bytes_not_copied > 4)
+			goto fault;
+		state->instr_len = 4;
+		word0 = *((uint16_t *)(addr+2));
+		state->words[0] = (word1 << 16) | word0;
+	} else {
+		state->instr_len = 2;
+		state->words[0] = word1;
+	}
+
+	/* Read the second word in case of limm */
+	word1 = *((uint16_t *)(addr + state->instr_len));
+	word0 = *((uint16_t *)(addr + state->instr_len + 2));
+	state->words[1] = (word1 << 16) | word0;
+
+	switch (state->major_opcode) {
+	case op_Bcc:
+		state->is_branch = 1;
+
+		/* unconditional branch s25, conditional branch s21 */
+		fieldA = (IS_BIT(state->words[0], 16)) ?
+			FIELD_s25(state->words[0]) :
+			FIELD_s21(state->words[0]);
+
+		state->delay_slot = IS_BIT(state->words[0], 5);
+		state->target = fieldA + (addr & ~0x3);
+		state->flow = direct_jump;
+		break;
+
+	case op_BLcc:
+		if (IS_BIT(state->words[0], 16)) {
+			/* Branch and Link*/
+			/* unconditional branch s25, conditional branch s21 */
+			fieldA = (IS_BIT(state->words[0], 17)) ?
+				(FIELD_s25(state->words[0]) & ~0x3) :
+				FIELD_s21(state->words[0]);
+
+			state->flow = direct_call;
+		} else {
+			/*Branch On Compare */
+			fieldA = FIELD_s9(state->words[0]) & ~0x3;
+			state->flow = direct_jump;
+		}
+
+		state->delay_slot = IS_BIT(state->words[0], 5);
+		state->target = fieldA + (addr & ~0x3);
+		state->is_branch = 1;
+		break;
+
+	case op_LD:  /* LD<zz> a,[b,s9] */
+		state->write = 0;
+		state->di = BITS(state->words[0], 11, 11);
+		if (state->di)
+			break;
+		state->x = BITS(state->words[0], 6, 6);
+		state->zz = BITS(state->words[0], 7, 8);
+		state->aa = BITS(state->words[0], 9, 10);
+		state->wb_reg = FIELD_B(state->words[0]);
+		if (state->wb_reg == REG_LIMM) {
+			state->instr_len += 4;
+			state->aa = 0;
+			state->src1 = state->words[1];
+		} else {
+			state->src1 = get_reg(state->wb_reg, regs, cregs);
+		}
+		state->src2 = FIELD_s9(state->words[0]);
+		state->dest = FIELD_A(state->words[0]);
+		state->pref = (state->dest == REG_LIMM);
+		break;
+
+	case op_ST:
+		state->write = 1;
+		state->di = BITS(state->words[0], 5, 5);
+		if (state->di)
+			break;
+		state->aa = BITS(state->words[0], 3, 4);
+		state->zz = BITS(state->words[0], 1, 2);
+		state->src1 = FIELD_C(state->words[0]);
+		if (state->src1 == REG_LIMM) {
+			state->instr_len += 4;
+			state->src1 = state->words[1];
+		} else {
+			state->src1 = get_reg(state->src1, regs, cregs);
+		}
+		state->wb_reg = FIELD_B(state->words[0]);
+		if (state->wb_reg == REG_LIMM) {
+			state->aa = 0;
+			state->instr_len += 4;
+			state->src2 = state->words[1];
+		} else {
+			state->src2 = get_reg(state->wb_reg, regs, cregs);
+		}
+		state->src3 = FIELD_s9(state->words[0]);
+		break;
+
+	case op_MAJOR_4:
+		subopcode = MINOR_OPCODE(state->words[0]);
+		switch (subopcode) {
+		case 32:	/* Jcc */
+		case 33:	/* Jcc.D */
+		case 34:	/* JLcc */
+		case 35:	/* JLcc.D */
+			is_linked = 0;
+
+			if (subopcode == 33 || subopcode == 35)
+				state->delay_slot = 1;
+
+			if (subopcode == 34 || subopcode == 35)
+				is_linked = 1;
+
+			fieldCisReg = 0;
+			op_format = BITS(state->words[0], 22, 23);
+			if (op_format == 0 || ((op_format == 3) &&
+				(!IS_BIT(state->words[0], 5)))) {
+				fieldC = FIELD_C(state->words[0]);
+
+				if (fieldC == REG_LIMM) {
+					fieldC = state->words[1];
+					state->instr_len += 4;
+				} else {
+					fieldCisReg = 1;
+				}
+			} else if (op_format == 1 || ((op_format == 3)
+				&& (IS_BIT(state->words[0], 5)))) {
+				fieldC = FIELD_C(state->words[0]);
+			} else  {
+				/* op_format == 2 */
+				fieldC = FIELD_s12(state->words[0]);
+			}
+
+			if (!fieldCisReg) {
+				state->target = fieldC;
+				state->flow = is_linked ?
+					direct_call : direct_jump;
+			} else {
+				state->target = get_reg(fieldC, regs, cregs);
+				state->flow = is_linked ?
+					indirect_call : indirect_jump;
+			}
+			state->is_branch = 1;
+			break;
+
+		case 40:	/* LPcc */
+			if (BITS(state->words[0], 22, 23) == 3) {
+				/* Conditional LPcc u7 */
+				fieldC = FIELD_C(state->words[0]);
+
+				fieldC = fieldC << 1;
+				fieldC += (addr & ~0x03);
+				state->is_branch = 1;
+				state->flow = direct_jump;
+				state->target = fieldC;
+			}
+			/* For Unconditional lp, next pc is the fall through
+			 * which is updated */
+			break;
+
+		case 48 ... 55:	/* LD a,[b,c] */
+			state->di = BITS(state->words[0], 15, 15);
+			if (state->di)
+				break;
+			state->x = BITS(state->words[0], 16, 16);
+			state->zz = BITS(state->words[0], 17, 18);
+			state->aa = BITS(state->words[0], 22, 23);
+			state->wb_reg = FIELD_B(state->words[0]);
+			if (state->wb_reg == REG_LIMM) {
+				state->instr_len += 4;
+				state->src1 = state->words[1];
+			} else {
+				state->src1 = get_reg(state->wb_reg, regs,
+						cregs);
+			}
+			state->src2 = FIELD_C(state->words[0]);
+			if (state->src2 == REG_LIMM) {
+				state->instr_len += 4;
+				state->src2 = state->words[1];
+			} else {
+				state->src2 = get_reg(state->src2, regs,
+					cregs);
+			}
+			state->dest = FIELD_A(state->words[0]);
+			if (state->dest == REG_LIMM)
+				state->pref = 1;
+			break;
+
+		case 10:	/* MOV */
+			/* still need to check for limm to extract instr len */
+			/* MOV is special case because it only takes 2 args */
+			switch (BITS(state->words[0], 22, 23)) {
+			case 0: /* OP a,b,c */
+				if (FIELD_C(state->words[0]) == REG_LIMM)
+					state->instr_len += 4;
+				break;
+			case 1: /* OP a,b,u6 */
+				break;
+			case 2: /* OP b,b,s12 */
+				break;
+			case 3: /* OP.cc b,b,c/u6 */
+				if ((!IS_BIT(state->words[0], 5)) &&
+				    (FIELD_C(state->words[0]) == REG_LIMM))
+					state->instr_len += 4;
+				break;
+			}
+			break;
+
+
+		default:
+			/* Not a Load, Jump or Loop instruction */
+			/* still need to check for limm to extract instr len */
+			switch (BITS(state->words[0], 22, 23)) {
+			case 0: /* OP a,b,c */
+				if ((FIELD_B(state->words[0]) == REG_LIMM) ||
+				    (FIELD_C(state->words[0]) == REG_LIMM))
+					state->instr_len += 4;
+				break;
+			case 1: /* OP a,b,u6 */
+				break;
+			case 2: /* OP b,b,s12 */
+				break;
+			case 3: /* OP.cc b,b,c/u6 */
+				if ((!IS_BIT(state->words[0], 5)) &&
+				   ((FIELD_B(state->words[0]) == REG_LIMM) ||
+				    (FIELD_C(state->words[0]) == REG_LIMM)))
+					state->instr_len += 4;
+				break;
+			}
+			break;
+		}
+		break;
+
+	/* 16 Bit Instructions */
+	case op_LD_ADD: /* LD_S|LDB_S|LDW_S a,[b,c] */
+		state->zz = BITS(state->words[0], 3, 4);
+		state->src1 = get_reg(FIELD_S_B(state->words[0]), regs, cregs);
+		state->src2 = get_reg(FIELD_S_C(state->words[0]), regs, cregs);
+		state->dest = FIELD_S_A(state->words[0]);
+		break;
+
+	case op_ADD_MOV_CMP:
+		/* check for limm, ignore mov_s h,b (== mov_s 0,b) */
+		if ((BITS(state->words[0], 3, 4) < 3) &&
+		    (FIELD_S_H(state->words[0]) == REG_LIMM))
+			state->instr_len += 4;
+		break;
+
+	case op_S:
+		subopcode = BITS(state->words[0], 5, 7);
+		switch (subopcode) {
+		case 0:	/* j_s */
+		case 1:	/* j_s.d */
+		case 2:	/* jl_s */
+		case 3:	/* jl_s.d */
+			state->target = get_reg(FIELD_S_B(state->words[0]),
+						regs, cregs);
+			state->delay_slot = subopcode & 1;
+			state->flow = (subopcode >= 2) ?
+				direct_call : indirect_jump;
+			break;
+		case 7:
+			switch (BITS(state->words[0], 8, 10)) {
+			case 4:	/* jeq_s [blink] */
+			case 5:	/* jne_s [blink] */
+			case 6:	/* j_s [blink] */
+			case 7:	/* j_s.d [blink] */
+				state->delay_slot = (subopcode == 7);
+				state->flow = indirect_jump;
+				state->target = get_reg(31, regs, cregs);
+			default:
+				break;
+			}
+		default:
+			break;
+		}
+		break;
+
+	case op_LD_S:	/* LD_S c, [b, u7] */
+		state->src1 = get_reg(FIELD_S_B(state->words[0]), regs, cregs);
+		state->src2 = FIELD_S_u7(state->words[0]);
+		state->dest = FIELD_S_C(state->words[0]);
+		break;
+
+	case op_LDB_S:
+	case op_STB_S:
+		/* no further handling required as byte accesses should not
+		 * cause an unaligned access exception */
+		state->zz = 1;
+		break;
+
+	case op_LDWX_S:	/* LDWX_S c, [b, u6] */
+		state->x = 1;
+		/* intentional fall-through */
+
+	case op_LDW_S:	/* LDW_S c, [b, u6] */
+		state->zz = 2;
+		state->src1 = get_reg(FIELD_S_B(state->words[0]), regs, cregs);
+		state->src2 = FIELD_S_u6(state->words[0]);
+		state->dest = FIELD_S_C(state->words[0]);
+		break;
+
+	case op_ST_S:	/* ST_S c, [b, u7] */
+		state->write = 1;
+		state->src1 = get_reg(FIELD_S_C(state->words[0]), regs, cregs);
+		state->src2 = get_reg(FIELD_S_B(state->words[0]), regs, cregs);
+		state->src3 = FIELD_S_u7(state->words[0]);
+		break;
+
+	case op_STW_S:	/* STW_S c,[b,u6] */
+		state->write = 1;
+		state->zz = 2;
+		state->src1 = get_reg(FIELD_S_C(state->words[0]), regs, cregs);
+		state->src2 = get_reg(FIELD_S_B(state->words[0]), regs, cregs);
+		state->src3 = FIELD_S_u6(state->words[0]);
+		break;
+
+	case op_SP:	/* LD_S|LDB_S b,[sp,u7], ST_S|STB_S b,[sp,u7] */
+		/* note: we are ignoring possibility of:
+		 * ADD_S, SUB_S, PUSH_S, POP_S as these should not
+		 * cause unaliged exception anyway */
+		state->write = BITS(state->words[0], 6, 6);
+		state->zz = BITS(state->words[0], 5, 5);
+		if (state->zz)
+			break;	/* byte accesses should not come here */
+		if (!state->write) {
+			state->src1 = get_reg(28, regs, cregs);
+			state->src2 = FIELD_S_u7(state->words[0]);
+			state->dest = FIELD_S_B(state->words[0]);
+		} else {
+			state->src1 = get_reg(FIELD_S_B(state->words[0]), regs,
+					cregs);
+			state->src2 = get_reg(28, regs, cregs);
+			state->src3 = FIELD_S_u7(state->words[0]);
+		}
+		break;
+
+	case op_GP:	/* LD_S|LDB_S|LDW_S r0,[gp,s11/s9/s10] */
+		/* note: ADD_S r0, gp, s11 is ignored */
+		state->zz = BITS(state->words[0], 9, 10);
+		state->src1 = get_reg(26, regs, cregs);
+		state->src2 = state->zz ? FIELD_S_s10(state->words[0]) :
+			FIELD_S_s11(state->words[0]);
+		state->dest = 0;
+		break;
+
+	case op_Pcl:	/* LD_S b,[pcl,u10] */
+		state->src1 = regs->ret & ~3;
+		state->src2 = FIELD_S_u10(state->words[0]);
+		state->dest = FIELD_S_B(state->words[0]);
+		break;
+
+	case op_BR_S:
+		state->target = FIELD_S_s8(state->words[0]) + (addr & ~0x03);
+		state->flow = direct_jump;
+		state->is_branch = 1;
+		break;
+
+	case op_B_S:
+		fieldA = (BITS(state->words[0], 9, 10) == 3) ?
+			FIELD_S_s7(state->words[0]) :
+			FIELD_S_s10(state->words[0]);
+		state->target = fieldA + (addr & ~0x03);
+		state->flow = direct_jump;
+		state->is_branch = 1;
+		break;
+
+	case op_BL_S:
+		state->target = FIELD_S_s13(state->words[0]) + (addr & ~0x03);
+		state->flow = direct_call;
+		state->is_branch = 1;
+		break;
+
+	default:
+		break;
+	}
+
+	if (bytes_not_copied <= (8 - state->instr_len))
+		return;
+
+fault:	state->fault = 1;
+}
+
+long __kprobes get_reg(int reg, struct pt_regs *regs,
+		       struct callee_regs *cregs)
+{
+	long *p;
+
+	if (reg <= 12) {
+		p = &regs->r0;
+		return p[-reg];
+	}
+
+	if (cregs && (reg <= 25)) {
+		p = &cregs->r13;
+		return p[13-reg];
+	}
+
+	if (reg == 26)
+		return regs->r26;
+	if (reg == 27)
+		return regs->fp;
+	if (reg == 28)
+		return regs->sp;
+	if (reg == 31)
+		return regs->blink;
+
+	return 0;
+}
+
+void __kprobes set_reg(int reg, long val, struct pt_regs *regs,
+		struct callee_regs *cregs)
+{
+	long *p;
+
+	switch (reg) {
+	case 0 ... 12:
+		p = &regs->r0;
+		p[-reg] = val;
+		break;
+	case 13 ... 25:
+		if (cregs) {
+			p = &cregs->r13;
+			p[13-reg] = val;
+		}
+		break;
+	case 26:
+		regs->r26 = val;
+		break;
+	case 27:
+		regs->fp = val;
+		break;
+	case 28:
+		regs->sp = val;
+		break;
+	case 31:
+		regs->blink = val;
+		break;
+	default:
+		break;
+	}
+}
+
+/*
+ * Disassembles the insn at @pc and sets @next_pc to next PC (which could be
+ * @pc +2/4/6 (ARCompact ISA allows free intermixing of 16/32 bit insns).
+ *
+ * If @pc is a branch
+ *	-@tgt_if_br is set to branch target.
+ *	-If branch has delay slot, @next_pc updated with actual next PC.
+ */
+int __kprobes disasm_next_pc(unsigned long pc, struct pt_regs *regs,
+			     struct callee_regs *cregs,
+			     unsigned long *next_pc, unsigned long *tgt_if_br)
+{
+	struct disasm_state instr;
+
+	memset(&instr, 0, sizeof(struct disasm_state));
+	disasm_instr(pc, &instr, 0, regs, cregs);
+
+	*next_pc = pc + instr.instr_len;
+
+	/* Instruction with possible two targets branch, jump and loop */
+	if (instr.is_branch)
+		*tgt_if_br = instr.target;
+
+	/* For the instructions with delay slots, the fall through is the
+	 * instruction following the instruction in delay slot.
+	 */
+	 if (instr.delay_slot) {
+		struct disasm_state instr_d;
+
+		disasm_instr(*next_pc, &instr_d, 0, regs, cregs);
+
+		*next_pc += instr_d.instr_len;
+	 }
+
+	 /* Zero Overhead Loop - end of the loop */
+	if (!(regs->status32 & STATUS32_L) && (*next_pc == regs->lp_end)
+		&& (regs->lp_count > 1)) {
+		*next_pc = regs->lp_start;
+	}
+
+	return instr.is_branch;
+}
+
+#endif /* CONFIG_KGDB || CONFIG_ARC_MISALIGN_ACCESS || CONFIG_KPROBES */
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
new file mode 100644
index 00000000000..83a046a7cd0
--- /dev/null
+++ b/arch/arc/kernel/entry.S
@@ -0,0 +1,773 @@
+/*
+ * Low Level Interrupts/Traps/Exceptions(non-TLB) Handling for ARC
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * vineetg: May 2011
+ *  -Userspace unaligned access emulation
+ *
+ * vineetg: Feb 2011 (ptrace low level code fixes)
+ *  -traced syscall return code (r0) was not saved into pt_regs for restoring
+ *   into user reg-file when traded task rets to user space.
+ *  -syscalls needing arch-wrappers (mainly for passing sp as pt_regs)
+ *   were not invoking post-syscall trace hook (jumping directly into
+ *   ret_from_system_call)
+ *
+ * vineetg: Nov 2010:
+ *  -Vector table jumps (@8 bytes) converted into branches (@4 bytes)
+ *  -To maintain the slot size of 8 bytes/vector, added nop, which is
+ *   not executed at runtime.
+ *
+ * vineetg: Nov 2009 (Everything needed for TIF_RESTORE_SIGMASK)
+ *  -do_signal()invoked upon TIF_RESTORE_SIGMASK as well
+ *  -Wrappers for sys_{,rt_}sigsuspend() nolonger needed as they don't
+ *   need ptregs anymore
+ *
+ * Vineetg: Oct 2009
+ *  -In a rare scenario, Process gets a Priv-V exception and gets scheduled
+ *   out. Since we don't do FAKE RTIE for Priv-V, CPU excpetion state remains
+ *   active (AE bit enabled).  This causes a double fault for a subseq valid
+ *   exception. Thus FAKE RTIE needed in low level Priv-Violation handler.
+ *   Instr Error could also cause similar scenario, so same there as well.
+ *
+ * Vineetg: March 2009 (Supporting 2 levels of Interrupts)
+ *
+ * Vineetg: Aug 28th 2008: Bug #94984
+ *  -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap
+ *   Normally CPU does this automatically, however when doing FAKE rtie,
+ *   we need to explicitly do this. The problem in macros
+ *   FAKE_RET_FROM_EXCPN and FAKE_RET_FROM_EXCPN_LOCK_IRQ was that this bit
+ *   was being "CLEARED" rather then "SET". Since it is Loop INHIBIT Bit,
+ *   setting it and not clearing it clears ZOL context
+ *
+ * Vineetg: May 16th, 2008
+ *  - r25 now contains the Current Task when in kernel
+ *
+ * Vineetg: Dec 22, 2007
+ *    Minor Surgery of Low Level ISR to make it SMP safe
+ *    - MMU_SCRATCH0 Reg used for freeing up r9 in Level 1 ISR
+ *    - _current_task is made an array of NR_CPUS
+ *    - Access of _current_task wrapped inside a macro so that if hardware
+ *       team agrees for a dedicated reg, no other code is touched
+ *
+ * Amit Bhor, Rahul Trivedi, Kanika Nema, Sameer Dhavale : Codito Tech 2004
+ */
+
+/*------------------------------------------------------------------
+ *    Function                            ABI
+ *------------------------------------------------------------------
+ *
+ *  Arguments                           r0 - r7
+ *  Caller Saved Registers              r0 - r12
+ *  Callee Saved Registers              r13- r25
+ *  Global Pointer (gp)                 r26
+ *  Frame Pointer (fp)                  r27
+ *  Stack Pointer (sp)                  r28
+ *  Interrupt link register (ilink1)    r29
+ *  Interrupt link register (ilink2)    r30
+ *  Branch link register (blink)        r31
+ *------------------------------------------------------------------
+ */
+
+	.cpu A7
+
+;############################ Vector Table #################################
+
+.macro VECTOR  lbl
+#if 1   /* Just in case, build breaks */
+	j   \lbl
+#else
+	b   \lbl
+	nop
+#endif
+.endm
+
+	.section .vector, "ax",@progbits
+	.align 4
+
+/* Each entry in the vector table must occupy 2 words. Since it is a jump
+ * across sections (.vector to .text) we are gauranteed that 'j somewhere'
+ * will use the 'j limm' form of the intrsuction as long as somewhere is in
+ * a section other than .vector.
+ */
+
+; ********* Critical System Events **********************
+VECTOR   res_service             ; 0x0, Restart Vector  (0x0)
+VECTOR   mem_service             ; 0x8, Mem exception   (0x1)
+VECTOR   instr_service           ; 0x10, Instrn Error   (0x2)
+
+; ******************** Device ISRs **********************
+#ifdef CONFIG_ARC_IRQ3_LV2
+VECTOR   handle_interrupt_level2
+#else
+VECTOR   handle_interrupt_level1
+#endif
+
+VECTOR   handle_interrupt_level1
+
+#ifdef CONFIG_ARC_IRQ5_LV2
+VECTOR   handle_interrupt_level2
+#else
+VECTOR   handle_interrupt_level1
+#endif
+
+#ifdef CONFIG_ARC_IRQ6_LV2
+VECTOR   handle_interrupt_level2
+#else
+VECTOR   handle_interrupt_level1
+#endif
+
+.rept   25
+VECTOR   handle_interrupt_level1 ; Other devices
+.endr
+
+/* FOR ARC600: timer = 0x3, uart = 0x8, emac = 0x10 */
+
+; ******************** Exceptions **********************
+VECTOR   EV_MachineCheck         ; 0x100, Fatal Machine check   (0x20)
+VECTOR   EV_TLBMissI             ; 0x108, Intruction TLB miss   (0x21)
+VECTOR   EV_TLBMissD             ; 0x110, Data TLB miss         (0x22)
+VECTOR   EV_TLBProtV             ; 0x118, Protection Violation  (0x23)
+				 ;         or Misaligned Access
+VECTOR   EV_PrivilegeV           ; 0x120, Privilege Violation   (0x24)
+VECTOR   EV_Trap                 ; 0x128, Trap exception        (0x25)
+VECTOR   EV_Extension            ; 0x130, Extn Intruction Excp  (0x26)
+
+.rept   24
+VECTOR   reserved                ; Reserved Exceptions
+.endr
+
+#include <linux/linkage.h>   /* {EXTRY,EXIT} */
+#include <asm/entry.h>       /* SAVE_ALL_{INT1,INT2,SYS...} */
+#include <asm/errno.h>
+#include <asm/arcregs.h>
+#include <asm/irqflags.h>
+
+;##################### Scratch Mem for IRQ stack switching #############
+
+ARCFP_DATA int1_saved_reg
+	.align 32
+	.type   int1_saved_reg, @object
+	.size   int1_saved_reg, 4
+int1_saved_reg:
+	.zero 4
+
+/* Each Interrupt level needs its own scratch */
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
+
+ARCFP_DATA int2_saved_reg
+	.type   int2_saved_reg, @object
+	.size   int2_saved_reg, 4
+int2_saved_reg:
+	.zero 4
+
+#endif
+
+; ---------------------------------------------
+	.section .text, "ax",@progbits
+
+res_service:		; processor restart
+	flag    0x1     ; not implemented
+	nop
+	nop
+
+reserved:		; processor restart
+	rtie            ; jump to processor initializations
+
+;##################### Interrupt Handling ##############################
+
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
+; ---------------------------------------------
+;  Level 2 ISR: Can interrupt a Level 1 ISR
+; ---------------------------------------------
+ENTRY(handle_interrupt_level2)
+
+	; TODO-vineetg for SMP this wont work
+	; free up r9 as scratchpad
+	st  r9, [@int2_saved_reg]
+
+	;Which mode (user/kernel) was the system in when intr occured
+	lr  r9, [status32_l2]
+
+	SWITCH_TO_KERNEL_STK
+	SAVE_ALL_INT2
+
+	;------------------------------------------------------
+	; if L2 IRQ interrupted a L1 ISR, disable preemption
+	;------------------------------------------------------
+
+	ld r9, [sp, PT_status32]        ; get statu32_l2 (saved in pt_regs)
+	bbit0 r9, STATUS_A1_BIT, 1f     ; L1 not active when L2 IRQ, so normal
+
+	; A1 is set in status32_l2
+	; bump thread_info->preempt_count (Disable preemption)
+	GET_CURR_THR_INFO_FROM_SP   r10
+	ld      r9, [r10, THREAD_INFO_PREEMPT_COUNT]
+	add     r9, r9, 1
+	st      r9, [r10, THREAD_INFO_PREEMPT_COUNT]
+
+1:
+	;------------------------------------------------------
+	; setup params for Linux common ISR and invoke it
+	;------------------------------------------------------
+	lr  r0, [icause2]
+	and r0, r0, 0x1f
+
+	bl.d  @arch_do_IRQ
+	mov r1, sp
+
+	mov r8,0x2
+	sr r8, [AUX_IRQ_LV12]       ; clear bit in Sticky Status Reg
+
+	b   ret_from_exception
+
+END(handle_interrupt_level2)
+
+#endif
+
+; ---------------------------------------------
+;  Level 1 ISR
+; ---------------------------------------------
+ENTRY(handle_interrupt_level1)
+
+	/* free up r9 as scratchpad */
+#ifdef CONFIG_SMP
+	sr  r9, [ARC_REG_SCRATCH_DATA0]
+#else
+	st   r9, [@int1_saved_reg]
+#endif
+
+	;Which mode (user/kernel) was the system in when intr occured
+	lr  r9, [status32_l1]
+
+	SWITCH_TO_KERNEL_STK
+	SAVE_ALL_INT1
+
+	lr  r0, [icause1]
+	and r0, r0, 0x1f
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+	; icause1 needs to be read early, before calling tracing, which
+	; can clobber scratch regs, hence use of stack to stash it
+	push r0
+	TRACE_ASM_IRQ_DISABLE
+	pop  r0
+#endif
+
+	bl.d  @arch_do_IRQ
+	mov r1, sp
+
+	mov r8,0x1
+	sr r8, [AUX_IRQ_LV12]       ; clear bit in Sticky Status Reg
+
+	b   ret_from_exception
+END(handle_interrupt_level1)
+
+;################### Non TLB Exception Handling #############################
+
+; ---------------------------------------------
+; Instruction Error Exception Handler
+; ---------------------------------------------
+
+ENTRY(instr_service)
+
+	EXCEPTION_PROLOGUE
+
+	lr  r0, [efa]
+	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN r9
+
+	bl  do_insterror_or_kprobe
+	b   ret_from_exception
+END(instr_service)
+
+; ---------------------------------------------
+; Memory Error Exception Handler
+; ---------------------------------------------
+
+ENTRY(mem_service)
+
+	EXCEPTION_PROLOGUE
+
+	lr  r0, [efa]
+	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN r9
+
+	bl  do_memory_error
+	b   ret_from_exception
+END(mem_service)
+
+; ---------------------------------------------
+; Machine Check Exception Handler
+; ---------------------------------------------
+
+ENTRY(EV_MachineCheck)
+
+	EXCEPTION_PROLOGUE
+
+	lr  r2, [ecr]
+	lr  r0, [efa]
+	mov r1, sp
+
+	lsr  	r3, r2, 8
+	bmsk 	r3, r3, 7
+	brne    r3, ECR_C_MCHK_DUP_TLB, 1f
+
+	bl      do_tlb_overlap_fault
+	b       ret_from_exception
+
+1:
+	; DEAD END: can't do much, display Regs and HALT
+	SAVE_CALLEE_SAVED_USER
+
+	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r10
+	st  sp, [r10, THREAD_CALLEE_REG]
+
+	j  do_machine_check_fault
+
+END(EV_MachineCheck)
+
+; ---------------------------------------------
+; Protection Violation Exception Handler
+; ---------------------------------------------
+
+ENTRY(EV_TLBProtV)
+
+	EXCEPTION_PROLOGUE
+
+	;---------(3) Save some more regs-----------------
+	;  vineetg: Mar 6th: Random Seg Fault issue #1
+	;  ecr and efa were not saved in case an Intr sneaks in
+	;  after fake rtie
+
+	lr  r2, [ecr]
+	lr  r0, [efa]	; Faulting Data address
+
+	; --------(4) Return from CPU Exception Mode ---------
+	;  Fake a rtie, but rtie to next label
+	;  That way, subsequently, do_page_fault ( ) executes in pure kernel
+	;  mode with further Exceptions enabled
+
+	FAKE_RET_FROM_EXCPN r9
+
+	mov   r1, sp
+
+	;------ (5) Type of Protection Violation? ----------
+	;
+	; ProtV Hardware Exception is triggered for Access Faults of 2 types
+	;   -Access Violaton	: 00_23_(00|01|02|03)_00
+	;			         x  r  w  r+w
+	;   -Unaligned Access	: 00_23_04_00
+	;
+	bbit1 r2, ECR_C_BIT_PROTV_MISALIG_DATA, 4f
+
+	;========= (6a) Access Violation Processing ========
+	bl  do_page_fault
+	b   ret_from_exception
+
+	;========== (6b) Non aligned access ============
+4:
+
+	SAVE_CALLEE_SAVED_USER
+	mov r2, sp              ; callee_regs
+
+	bl  do_misaligned_access
+
+	; TBD: optimize - do this only if a callee reg was involved
+	; either a dst of emulated LD/ST or src with address-writeback
+	RESTORE_CALLEE_SAVED_USER
+
+	b   ret_from_exception
+
+END(EV_TLBProtV)
+
+; ---------------------------------------------
+; Privilege Violation Exception Handler
+; ---------------------------------------------
+ENTRY(EV_PrivilegeV)
+
+	EXCEPTION_PROLOGUE
+
+	lr  r0, [efa]
+	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN r9
+
+	bl  do_privilege_fault
+	b   ret_from_exception
+END(EV_PrivilegeV)
+
+; ---------------------------------------------
+; Extension Instruction Exception Handler
+; ---------------------------------------------
+ENTRY(EV_Extension)
+
+	EXCEPTION_PROLOGUE
+
+	lr  r0, [efa]
+	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN r9
+
+	bl  do_extension_fault
+	b   ret_from_exception
+END(EV_Extension)
+
+;######################### System Call Tracing #########################
+
+tracesys:
+	; save EFA in case tracer wants the PC of traced task
+	; using ERET won't work since next-PC has already committed
+	lr  r12, [efa]
+	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r11
+	st  r12, [r11, THREAD_FAULT_ADDR]	; thread.fault_address
+
+	; PRE Sys Call Ptrace hook
+	mov r0, sp			; pt_regs needed
+	bl  @syscall_trace_entry
+
+	; Tracing code now returns the syscall num (orig or modif)
+	mov r8, r0
+
+	; Do the Sys Call as we normally would.
+	; Validate the Sys Call number
+	cmp     r8,  NR_syscalls
+	mov.hi  r0, -ENOSYS
+	bhi     tracesys_exit
+
+	; Restore the sys-call args. Mere invocation of the hook abv could have
+	; clobbered them (since they are in scratch regs). The tracer could also
+	; have deliberately changed the syscall args: r0-r7
+	ld  r0, [sp, PT_r0]
+	ld  r1, [sp, PT_r1]
+	ld  r2, [sp, PT_r2]
+	ld  r3, [sp, PT_r3]
+	ld  r4, [sp, PT_r4]
+	ld  r5, [sp, PT_r5]
+	ld  r6, [sp, PT_r6]
+	ld  r7, [sp, PT_r7]
+	ld.as   r9, [sys_call_table, r8]
+	jl      [r9]        ; Entry into Sys Call Handler
+
+tracesys_exit:
+	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
+
+	;POST Sys Call Ptrace Hook
+	bl  @syscall_trace_exit
+	b   ret_from_exception ; NOT ret_from_system_call at is saves r0 which
+	; we'd done before calling post hook above
+
+;################### Break Point TRAP ##########################
+
+	; ======= (5b) Trap is due to Break-Point =========
+
+trap_with_param:
+
+	; stop_pc info by gdb needs this info
+	lr  r0, [efa]
+	mov r1, sp
+
+	; Now that we have read EFA, it is safe to do "fake" rtie
+	;   and get out of CPU exception mode
+	FAKE_RET_FROM_EXCPN r11
+
+	; Save callee regs in case gdb wants to have a look
+	; SP will grow up by size of CALLEE Reg-File
+	; NOTE: clobbers r12
+	SAVE_CALLEE_SAVED_USER
+
+	; save location of saved Callee Regs @ thread_struct->pc
+	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r10
+	st  sp, [r10, THREAD_CALLEE_REG]
+
+	; Call the trap handler
+	bl  do_non_swi_trap
+
+	; unwind stack to discard Callee saved Regs
+	DISCARD_CALLEE_SAVED_USER
+
+	b   ret_from_exception
+
+;##################### Trap Handling ##############################
+;
+; EV_Trap caused by TRAP_S and TRAP0 instructions.
+;------------------------------------------------------------------
+;   (1) System Calls
+;       :parameters in r0-r7.
+;       :r8 has the system call number
+;   (2) Break Points
+;------------------------------------------------------------------
+
+ENTRY(EV_Trap)
+
+	EXCEPTION_PROLOGUE
+
+	;------- (4) What caused the Trap --------------
+	lr     r12, [ecr]
+	bmsk.f 0, r12, 7
+	bnz    trap_with_param
+
+	; ======= (5a) Trap is due to System Call ========
+
+	; Before doing anything, return from CPU Exception Mode
+	FAKE_RET_FROM_EXCPN r11
+
+	; If syscall tracing ongoing, invoke pre-pos-hooks
+	GET_CURR_THR_INFO_FLAGS   r10
+	btst r10, TIF_SYSCALL_TRACE
+	bnz tracesys  ; this never comes back
+
+	;============ This is normal System Call case ==========
+	; Sys-call num shd not exceed the total system calls avail
+	cmp     r8,  NR_syscalls
+	mov.hi  r0, -ENOSYS
+	bhi     ret_from_system_call
+
+	; Offset into the syscall_table and call handler
+	ld.as   r9,[sys_call_table, r8]
+	jl      [r9]        ; Entry into Sys Call Handler
+
+	; fall through to ret_from_system_call
+END(EV_Trap)
+
+ENTRY(ret_from_system_call)
+
+	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
+
+	; fall through yet again to ret_from_exception
+
+;############# Return from Intr/Excp/Trap (Linux Specifics) ##############
+;
+; If ret to user mode do we need to handle signals, schedule() et al.
+
+ENTRY(ret_from_exception)
+
+	; Pre-{IRQ,Trap,Exception} K/U mode from pt_regs->status32
+	ld  r8, [sp, PT_status32]   ; returning to User/Kernel Mode
+
+	bbit0  r8, STATUS_U_BIT, resume_kernel_mode
+
+	; Before returning to User mode check-for-and-complete any pending work
+	; such as rescheduling/signal-delivery etc.
+resume_user_mode_begin:
+
+	; Disable IRQs to ensures that chk for pending work itself is atomic
+	; (and we don't end up missing a NEED_RESCHED/SIGPENDING due to an
+	; interim IRQ).
+	IRQ_DISABLE	r10
+
+	; Fast Path return to user mode if no pending work
+	GET_CURR_THR_INFO_FLAGS   r9
+	and.f  0,  r9, _TIF_WORK_MASK
+	bz     restore_regs
+
+	; --- (Slow Path #1) task preemption ---
+	bbit0  r9, TIF_NEED_RESCHED, .Lchk_pend_signals
+	mov    blink, resume_user_mode_begin  ; tail-call to U mode ret chks
+	b      @schedule 	; BTST+Bnz causes relo error in link
+
+.Lchk_pend_signals:
+	IRQ_ENABLE	r10
+
+	; --- (Slow Path #2) pending signal  ---
+	mov r0, sp	; pt_regs for arg to do_signal()/do_notify_resume()
+
+	GET_CURR_THR_INFO_FLAGS   r9
+	bbit0  r9, TIF_SIGPENDING, .Lchk_notify_resume
+
+	; Normal Trap/IRQ entry only saves Scratch (caller-saved) regs
+	; in pt_reg since the "C" ABI (kernel code) will automatically
+	; save/restore callee-saved regs.
+	;
+	; However, here we need to explicitly save callee regs because
+	; (i)  If this signal causes coredump - full regfile needed
+	; (ii) If signal is SIGTRAP/SIGSTOP, task is being traced thus
+	;      tracer might call PEEKUSR(CALLEE reg)
+	;
+	; NOTE: SP will grow up by size of CALLEE Reg-File
+	SAVE_CALLEE_SAVED_USER		; clobbers r12
+
+	; save location of saved Callee Regs @ thread_struct->callee
+	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r10
+	st  sp, [r10, THREAD_CALLEE_REG]
+
+	bl  @do_signal
+
+	; Ideally we want to discard the Callee reg above, however if this was
+	; a tracing signal, tracer could have done a POKEUSR(CALLEE reg)
+	RESTORE_CALLEE_SAVED_USER
+
+	b      resume_user_mode_begin	; loop back to start of U mode ret
+
+	; --- (Slow Path #3) notify_resume ---
+.Lchk_notify_resume:
+	btst   r9, TIF_NOTIFY_RESUME
+	blnz   @do_notify_resume
+	b      resume_user_mode_begin	; unconditionally back to U mode ret chks
+					; for single exit point from this block
+
+resume_kernel_mode:
+
+	; Disable Interrupts from this point on
+	; CONFIG_PREEMPT: This is a must for preempt_schedule_irq()
+	; !CONFIG_PREEMPT: To ensure restore_regs is intr safe
+	IRQ_DISABLE	r9
+
+#ifdef CONFIG_PREEMPT
+
+	; Can't preempt if preemption disabled
+	GET_CURR_THR_INFO_FROM_SP   r10
+	ld  r8, [r10, THREAD_INFO_PREEMPT_COUNT]
+	brne  r8, 0, restore_regs
+
+	; check if this task's NEED_RESCHED flag set
+	ld  r9, [r10, THREAD_INFO_FLAGS]
+	bbit0  r9, TIF_NEED_RESCHED, restore_regs
+
+	; Invoke PREEMPTION
+	bl      preempt_schedule_irq
+
+	; preempt_schedule_irq() always returns with IRQ disabled
+#endif
+
+	; fall through
+
+;############# Return from Intr/Excp/Trap (ARC Specifics) ##############
+;
+; Restore the saved sys context (common exit-path for EXCPN/IRQ/Trap)
+; IRQ shd definitely not happen between now and rtie
+; All 2 entry points to here already disable interrupts
+
+restore_regs :
+
+	TRACE_ASM_IRQ_ENABLE
+
+	lr	r10, [status32]
+
+	; Restore REG File. In case multiple Events outstanding,
+	; use the same priorty as rtie: EXCPN, L2 IRQ, L1 IRQ, None
+	; Note that we use realtime STATUS32 (not pt_regs->status32) to
+	; decide that.
+
+	; if Returning from Exception
+	bbit0  r10, STATUS_AE_BIT, not_exception
+	RESTORE_ALL_SYS
+	rtie
+
+	; Not Exception so maybe Interrupts (Level 1 or 2)
+
+not_exception:
+
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
+
+	; Level 2 interrupt return Path - from hardware standpoint
+	bbit0  r10, STATUS_A2_BIT, not_level2_interrupt
+
+	;------------------------------------------------------------------
+	; However the context returning might not have taken L2 intr itself
+	; e.g. Task'A' user-code -> L2 intr -> schedule -> 'B' user-code ret
+	; Special considerations needed for the context which took L2 intr
+
+	ld   r9, [sp, PT_event]        ; Ensure this is L2 intr context
+	brne r9, event_IRQ2, 149f
+
+	;------------------------------------------------------------------
+	; if L2 IRQ interrupted an L1 ISR,  we'd disabled preemption earlier
+	; so that sched doesn't move to new task, causing L1 to be delayed
+	; undeterministically. Now that we've achieved that, let's reset
+	; things to what they were, before returning from L2 context
+	;----------------------------------------------------------------
+
+	ld r9, [sp, PT_status32]       ; get statu32_l2 (saved in pt_regs)
+	bbit0 r9, STATUS_A1_BIT, 149f  ; L1 not active when L2 IRQ, so normal
+
+	; decrement thread_info->preempt_count (re-enable preemption)
+	GET_CURR_THR_INFO_FROM_SP   r10
+	ld      r9, [r10, THREAD_INFO_PREEMPT_COUNT]
+
+	; paranoid check, given A1 was active when A2 happened, preempt count
+	; must not be 0 because we would have incremented it.
+	; If this does happen we simply HALT as it means a BUG !!!
+	cmp     r9, 0
+	bnz     2f
+	flag 1
+
+2:
+	sub     r9, r9, 1
+	st      r9, [r10, THREAD_INFO_PREEMPT_COUNT]
+
+149:
+	;return from level 2
+	RESTORE_ALL_INT2
+debug_marker_l2:
+	rtie
+
+not_level2_interrupt:
+
+#endif
+
+	bbit0  r10, STATUS_A1_BIT, not_level1_interrupt
+
+	;return from level 1
+
+	RESTORE_ALL_INT1
+debug_marker_l1:
+	rtie
+
+not_level1_interrupt:
+
+	;this case is for syscalls or Exceptions (with fake rtie)
+
+	RESTORE_ALL_SYS
+debug_marker_syscall:
+	rtie
+
+END(ret_from_exception)
+
+ENTRY(ret_from_fork)
+	; when the forked child comes here from the __switch_to function
+	; r0 has the last task pointer.
+	; put last task in scheduler queue
+	bl   @schedule_tail
+
+	; If kernel thread, jump to its entry-point
+	ld   r9, [sp, PT_status32]
+	brne r9, 0, 1f
+
+	jl.d [r14]
+	mov  r0, r13		; arg to payload
+
+1:
+	; special case of kernel_thread entry point returning back due to
+	; kernel_execve() - pretend return from syscall to ret to userland
+	b    ret_from_exception
+END(ret_from_fork)
+
+;################### Special Sys Call Wrappers ##########################
+
+ENTRY(sys_clone_wrapper)
+	SAVE_CALLEE_SAVED_USER
+	bl  @sys_clone
+	DISCARD_CALLEE_SAVED_USER
+
+	GET_CURR_THR_INFO_FLAGS   r10
+	btst r10, TIF_SYSCALL_TRACE
+	bnz  tracesys_exit
+
+	b ret_from_system_call
+END(sys_clone_wrapper)
+
+#ifdef CONFIG_ARC_DW2_UNWIND
+; Workaround for bug 94179 (STAR ):
+; Despite -fasynchronous-unwind-tables, linker is not making dwarf2 unwinder
+; section (.debug_frame) as loadable. So we force it here.
+; This also fixes STAR 9000487933 where the prev-workaround (objcopy --setflag)
+; would not work after a clean build due to kernel build system dependencies.
+.section .debug_frame, "wa",@progbits
+#endif
diff --git a/arch/arc/kernel/fpu.c b/arch/arc/kernel/fpu.c
new file mode 100644
index 00000000000..f352e512cbd
--- /dev/null
+++ b/arch/arc/kernel/fpu.c
@@ -0,0 +1,55 @@
+/*
+ * fpu.c - save/restore of Floating Point Unit Registers on task switch
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include <asm/switch_to.h>
+
+/*
+ * To save/restore FPU regs, simplest scheme would use LR/SR insns.
+ * However since SR serializes the pipeline, an alternate "hack" can be used
+ * which uses the FPU Exchange insn (DEXCL) to r/w FPU regs.
+ *
+ * Store to 64bit dpfp1 reg from a pair of core regs:
+ *   dexcl1 0, r1, r0  ; where r1:r0 is the 64 bit val
+ *
+ * Read from dpfp1 into pair of core regs (w/o clobbering dpfp1)
+ *   mov_s    r3, 0
+ *   daddh11  r1, r3, r3   ; get "hi" into r1 (dpfp1 unchanged)
+ *   dexcl1   r0, r1, r3   ; get "low" into r0 (dpfp1 low clobbered)
+ *   dexcl1    0, r1, r0   ; restore dpfp1 to orig value
+ *
+ * However we can tweak the read, so that read-out of outgoing task's FPU regs
+ * and write of incoming task's regs happen in one shot. So all the work is
+ * done before context switch
+ */
+
+void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
+{
+	unsigned int *saveto = &prev->thread.fpu.aux_dpfp[0].l;
+	unsigned int *readfrom = &next->thread.fpu.aux_dpfp[0].l;
+
+	const unsigned int zero = 0;
+
+	__asm__ __volatile__(
+		"daddh11  %0, %2, %2\n"
+		"dexcl1   %1, %3, %4\n"
+		: "=&r" (*(saveto + 1)), /* early clobber must here */
+		  "=&r" (*(saveto))
+		: "r" (zero), "r" (*(readfrom + 1)), "r" (*(readfrom))
+	);
+
+	__asm__ __volatile__(
+		"daddh22  %0, %2, %2\n"
+		"dexcl2   %1, %3, %4\n"
+		: "=&r"(*(saveto + 3)),	/* early clobber must here */
+		  "=&r"(*(saveto + 2))
+		: "r" (zero), "r" (*(readfrom + 3)), "r" (*(readfrom + 2))
+	);
+}
diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S
new file mode 100644
index 00000000000..4d2481bd8b9
--- /dev/null
+++ b/arch/arc/kernel/head.S
@@ -0,0 +1,140 @@
+/*
+ * ARC CPU startup Code
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Vineetg: Dec 2007
+ *  -Check if we are running on Simulator or on real hardware
+ *      to skip certain things during boot on simulator
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/entry.h>
+#include <asm/arcregs.h>
+#include <asm/cache.h>
+
+.macro CPU_EARLY_SETUP
+
+	; Setting up Vectror Table (in case exception happens in early boot
+	sr	@_int_vec_base_lds, [AUX_INTR_VEC_BASE]
+
+	; Disable I-cache/D-cache if kernel so configured
+	lr	r5, [ARC_REG_IC_BCR]
+	breq    r5, 0, 1f		; I$ doesn't exist
+	lr	r5, [ARC_REG_IC_CTRL]
+#ifdef CONFIG_ARC_HAS_ICACHE
+	bclr	r5, r5, 0		; 0 - Enable, 1 is Disable
+#else
+	bset	r5, r5, 0		; I$ exists, but is not used
+#endif
+	sr	r5, [ARC_REG_IC_CTRL]
+
+1:
+	lr	r5, [ARC_REG_DC_BCR]
+	breq    r5, 0, 1f		; D$ doesn't exist
+	lr	r5, [ARC_REG_DC_CTRL]
+	bclr	r5, r5, 6		; Invalidate (discard w/o wback)
+#ifdef CONFIG_ARC_HAS_DCACHE
+	bclr	r5, r5, 0		; Enable (+Inv)
+#else
+	bset	r5, r5, 0		; Disable (+Inv)
+#endif
+	sr	r5, [ARC_REG_DC_CTRL]
+
+1:
+.endm
+
+	.cpu A7
+
+	.section .init.text, "ax",@progbits
+	.type stext, @function
+	.globl stext
+stext:
+	;-------------------------------------------------------------------
+	; Don't clobber r0-r2 yet. It might have bootloader provided info
+	;-------------------------------------------------------------------
+
+	CPU_EARLY_SETUP
+
+#ifdef CONFIG_SMP
+	; Ensure Boot (Master) proceeds. Others wait in platform dependent way
+	;	IDENTITY Reg [ 3  2  1  0 ]
+	;	(cpu-id)             ^^^	=> Zero for UP ARC700
+	;					=> #Core-ID if SMP (Master 0)
+	; Note that non-boot CPUs might not land here if halt-on-reset and
+	; instead breath life from @first_lines_of_secondary, but we still
+	; need to make sure only boot cpu takes this path.
+	GET_CPU_ID  r5
+	cmp	r5, 0
+	mov.ne	r0, r5
+	jne	arc_platform_smp_wait_to_boot
+#endif
+	; Clear BSS before updating any globals
+	; XXX: use ZOL here
+	mov	r5, __bss_start
+	sub	r6, __bss_stop, r5
+	lsr.f	lp_count, r6, 2
+	lpnz	1f
+	st.ab   0, [r5, 4]
+1:
+
+	; Uboot - kernel ABI
+	;    r0 = [0] No uboot interaction, [1] cmdline in r2, [2] DTB in r2
+	;    r1 = magic number (board identity, unused as of now
+	;    r2 = pointer to uboot provided cmdline or external DTB in mem
+	; These are handled later in setup_arch()
+	st	r0, [@uboot_tag]
+	st	r2, [@uboot_arg]
+
+	; Identify if running on ISS vs Silicon
+	; 	IDENTITY Reg [ 3  2  1  0 ]
+	;	(chip-id)      ^^^^^		==> 0xffff for ISS
+	lr	r0, [identity]
+	lsr	r3, r0, 16
+	cmp	r3, 0xffff
+	mov.z	r4, 0
+	mov.nz	r4, 1
+	st	r4, [@running_on_hw]
+
+	; setup "current" tsk and optionally cache it in dedicated r25
+	mov	r9, @init_task
+	SET_CURR_TASK_ON_CPU  r9, r0	; r9 = tsk, r0 = scratch
+
+	; setup stack (fp, sp)
+	mov	fp, 0
+
+	; tsk->thread_info is really a PAGE, whose bottom hoists stack
+	GET_TSK_STACK_BASE r9, sp	; r9 = tsk, sp = stack base(output)
+
+	j	start_kernel	; "C" entry point
+
+#ifdef CONFIG_SMP
+;----------------------------------------------------------------
+;     First lines of code run by secondary before jumping to 'C'
+;----------------------------------------------------------------
+	.section .text, "ax",@progbits
+	.type first_lines_of_secondary, @function
+	.globl first_lines_of_secondary
+
+first_lines_of_secondary:
+
+	CPU_EARLY_SETUP
+
+	; setup per-cpu idle task as "current" on this CPU
+	ld	r0, [@secondary_idle_tsk]
+	SET_CURR_TASK_ON_CPU  r0, r1
+
+	; setup stack (fp, sp)
+	mov	fp, 0
+
+	; set it's stack base to tsk->thread_info bottom
+	GET_TSK_STACK_BASE r0, sp
+
+	j	start_kernel_secondary
+
+#endif
diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c
new file mode 100644