1 files changed, 50 insertions, 71 deletions

diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 4578e5b4b41..288610df205 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -56,7 +56,7 @@
  * IV. Notes
  * The current error (XDU, RFO) recovery code is untested.
  * So far, RDO takes his RX channel down and the right sequence to enable it
- * again is still a mistery. If RDO happens, plan a reboot. More details
+ * again is still a mystery. If RDO happens, plan a reboot. More details
  * in the code (NB: as this happens, TX still works).
  * Don't mess the cables during operation, especially on DTE ports. I don't
  * suggest it for DCE either but at least one can get some messages instead
@@ -80,6 +80,8 @@
  * - misc crapectomy.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/types.h>
@@ -91,7 +93,6 @@
 #include <linux/mm.h>
 #include <linux/slab.h>
 
-#include <asm/system.h>
 #include <asm/cache.h>
 #include <asm/byteorder.h>
 #include <asm/uaccess.h>
@@ -99,6 +100,7 @@
 #include <asm/irq.h>
 
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/string.h>
 
 #include <linux/if_arp.h>
@@ -552,7 +554,7 @@ static int dscc4_wait_ack_cec(struct dscc4_dev_priv *dpriv,
 		schedule_timeout_uninterruptible(10);
 		rmb();
 	} while (++i > 0);
-	printk(KERN_ERR "%s: %s timeout\n", dev->name, msg);
+	netdev_err(dev, "%s timeout\n", msg);
 done:
 	return (i >= 0) ? i : -EAGAIN;
 }
@@ -568,18 +570,18 @@ static int dscc4_do_action(struct net_device *dev, char *msg)
 		u32 state = readl(ioaddr);
 
 		if (state & ArAck) {
-			printk(KERN_DEBUG "%s: %s ack\n", dev->name, msg);
+			netdev_dbg(dev, "%s ack\n", msg);
 			writel(ArAck, ioaddr);
 			goto done;
 		} else if (state & Arf) {
-			printk(KERN_ERR "%s: %s failed\n", dev->name, msg);
+			netdev_err(dev, "%s failed\n", msg);
 			writel(Arf, ioaddr);
 			i = -1;
 			goto done;
 	}
 		rmb();
 	} while (++i > 0);
-	printk(KERN_ERR "%s: %s timeout\n", dev->name, msg);
+	netdev_err(dev, "%s timeout\n", msg);
 done:
 	return i;
 }
@@ -635,7 +637,7 @@ static void dscc4_tx_reset(struct dscc4_dev_priv *dpriv, struct net_device *dev)
 
 	writel(MTFi|Rdt, dpriv->base_addr + dpriv->dev_id*0x0c + CH0CFG);
 	if (dscc4_do_action(dev, "Rdt") < 0)
-		printk(KERN_ERR "%s: Tx reset failed\n", dev->name);
+		netdev_err(dev, "Tx reset failed\n");
 }
 #endif
 
@@ -697,16 +699,13 @@ static void dscc4_free1(struct pci_dev *pdev)
 	for (i = 0; i < dev_per_card; i++)
 		unregister_hdlc_device(dscc4_to_dev(root + i));
 
-	pci_set_drvdata(pdev, NULL);
-
 	for (i = 0; i < dev_per_card; i++)
 		free_netdev(root[i].dev);
 	kfree(root);
 	kfree(ppriv);
 }
 
-static int __devinit dscc4_init_one(struct pci_dev *pdev,
-				  const struct pci_device_id *ent)
+static int dscc4_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct dscc4_pci_priv *priv;
 	struct dscc4_dev_priv *dpriv;
@@ -721,22 +720,20 @@ static int __devinit dscc4_init_one(struct pci_dev *pdev,
 
 	rc = pci_request_region(pdev, 0, "registers");
 	if (rc < 0) {
-	        printk(KERN_ERR "%s: can't reserve MMIO region (regs)\n",
-			DRV_NAME);
+		pr_err("can't reserve MMIO region (regs)\n");
 	        goto err_disable_0;
 	}
 	rc = pci_request_region(pdev, 1, "LBI interface");
 	if (rc < 0) {
-	        printk(KERN_ERR "%s: can't reserve MMIO region (lbi)\n",
-			DRV_NAME);
+		pr_err("can't reserve MMIO region (lbi)\n");
 	        goto err_free_mmio_region_1;
 	}
 
 	ioaddr = pci_ioremap_bar(pdev, 0);
 	if (!ioaddr) {
-		printk(KERN_ERR "%s: cannot remap MMIO region %llx @ %llx\n",
-			DRV_NAME, (unsigned long long)pci_resource_len(pdev, 0),
-			(unsigned long long)pci_resource_start(pdev, 0));
+		pr_err("cannot remap MMIO region %llx @ %llx\n",
+		       (unsigned long long)pci_resource_len(pdev, 0),
+		       (unsigned long long)pci_resource_start(pdev, 0));
 		rc = -EIO;
 		goto err_free_mmio_regions_2;
 	}
@@ -756,7 +753,7 @@ static int __devinit dscc4_init_one(struct pci_dev *pdev,
 
 	rc = request_irq(pdev->irq, dscc4_irq, IRQF_SHARED, DRV_NAME, priv->root);
 	if (rc < 0) {
-		printk(KERN_WARNING "%s: IRQ %d busy\n", DRV_NAME, pdev->irq);
+		pr_warn("IRQ %d busy\n", pdev->irq);
 		goto err_release_4;
 	}
 
@@ -774,14 +771,15 @@ static int __devinit dscc4_init_one(struct pci_dev *pdev,
 	}
 	/* Global interrupt queue */
 	writel((u32)(((IRQ_RING_SIZE >> 5) - 1) << 20), ioaddr + IQLENR1);
+
+	rc = -ENOMEM;
+
 	priv->iqcfg = (__le32 *) pci_alloc_consistent(pdev,
 		IRQ_RING_SIZE*sizeof(__le32), &priv->iqcfg_dma);
 	if (!priv->iqcfg)
 		goto err_free_irq_5;
 	writel(priv->iqcfg_dma, ioaddr + IQCFG);
 
-	rc = -ENOMEM;
-
 	/*
 	 * SCC 0-3 private rx/tx irq structures
 	 * IQRX/TXi needs to be set soon. Learned it the hard way...
@@ -902,10 +900,8 @@ static int dscc4_found1(struct pci_dev *pdev, void __iomem *ioaddr)
 	int i, ret = -ENOMEM;
 
 	root = kcalloc(dev_per_card, sizeof(*root), GFP_KERNEL);
-	if (!root) {
-		printk(KERN_ERR "%s: can't allocate data\n", DRV_NAME);
+	if (!root)
 		goto err_out;
-	}
 
 	for (i = 0; i < dev_per_card; i++) {
 		root[i].dev = alloc_hdlcdev(root + i);
@@ -914,10 +910,8 @@ static int dscc4_found1(struct pci_dev *pdev, void __iomem *ioaddr)
 	}
 
 	ppriv = kzalloc(sizeof(*ppriv), GFP_KERNEL);
-	if (!ppriv) {
-		printk(KERN_ERR "%s: can't allocate private data\n", DRV_NAME);
+	if (!ppriv)
 		goto err_free_dev;
-	}
 
 	ppriv->root = root;
 	spin_lock_init(&ppriv->lock);
@@ -951,7 +945,7 @@ static int dscc4_found1(struct pci_dev *pdev, void __iomem *ioaddr)
 
 		ret = register_hdlc_device(d);
 		if (ret < 0) {
-			printk(KERN_ERR "%s: unable to register\n", DRV_NAME);
+			pr_err("unable to register\n");
 			dscc4_release_ring(dpriv);
 			goto err_unregister;
 	        }
@@ -1004,7 +998,7 @@ static int dscc4_loopback_check(struct dscc4_dev_priv *dpriv)
 	if (settings->loopback && (settings->clock_type != CLOCK_INT)) {
 		struct net_device *dev = dscc4_to_dev(dpriv);
 
-		printk(KERN_INFO "%s: loopback requires clock\n", dev->name);
+		netdev_info(dev, "loopback requires clock\n");
 		return -1;
 	}
 	return 0;
@@ -1065,7 +1059,7 @@ static int dscc4_open(struct net_device *dev)
 
 	/*
 	 * Due to various bugs, there is no way to reliably reset a
-	 * specific port (manufacturer's dependant special PCI #RST wiring
+	 * specific port (manufacturer's dependent special PCI #RST wiring
 	 * apart: it affects all ports). Thus the device goes in the best
 	 * silent mode possible at dscc4_close() time and simply claims to
 	 * be up if it's opened again. It still isn't possible to change
@@ -1077,7 +1071,7 @@ static int dscc4_open(struct net_device *dev)
 		scc_patchl(0, PowerUp, dpriv, dev, CCR0);
 		scc_patchl(0, 0x00050000, dpriv, dev, CCR2);
 		scc_writel(EventsMask, dpriv, dev, IMR);
-		printk(KERN_INFO "%s: up again.\n", dev->name);
+		netdev_info(dev, "up again\n");
 		goto done;
 	}
 
@@ -1094,11 +1088,11 @@ static int dscc4_open(struct net_device *dev)
 	 * situations.
 	 */
 	if (scc_readl_star(dpriv, dev) & SccBusy) {
-		printk(KERN_ERR "%s busy. Try later\n", dev->name);
+		netdev_err(dev, "busy - try later\n");
 		ret = -EAGAIN;
 		goto err_out;
 	} else
-		printk(KERN_INFO "%s: available. Good\n", dev->name);
+		netdev_info(dev, "available - good\n");
 
 	scc_writel(EventsMask, dpriv, dev, IMR);
 
@@ -1116,7 +1110,7 @@ static int dscc4_open(struct net_device *dev)
 	 * reset is needed. Suggestions anyone ?
 	 */
 	if ((ret = dscc4_xpr_ack(dpriv)) < 0) {
-		printk(KERN_ERR "%s: %s timeout\n", DRV_NAME, "XPR");
+		pr_err("XPR timeout\n");
 		goto err_disable_scc_events;
 	}
 	
@@ -1230,9 +1224,9 @@ static inline int dscc4_check_clock_ability(int port)
  *   scaling. Of course some rounding may take place.
  * - no high speed mode (40Mb/s). May be trivial to do but I don't have an
  *   appropriate external clocking device for testing.
- * - no time-slot/clock mode 5: shameless lazyness.
+ * - no time-slot/clock mode 5: shameless laziness.
  *
- * The clock signals wiring can be (is ?) manufacturer dependant. Good luck.
+ * The clock signals wiring can be (is ?) manufacturer dependent. Good luck.
  *
  * BIG FAT WARNING: if the device isn't provided enough clocking signal, it
  * won't pass the init sequence. For example, straight back-to-back DTE without
@@ -1341,8 +1335,7 @@ static int dscc4_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 			return -EPERM;
 
 		if (dpriv->flags & FakeReset) {
-			printk(KERN_INFO "%s: please reset the device"
-			       " before this command\n", dev->name);
+			netdev_info(dev, "please reset the device before this command\n");
 			return -EPERM;
 		}
 		if (copy_from_user(&dpriv->settings, line, size))
@@ -1505,8 +1498,7 @@ static irqreturn_t dscc4_irq(int irq, void *token)
 	writel(state, ioaddr + GSTAR);
 
 	if (state & Arf) {
-		printk(KERN_ERR "%s: failure (Arf). Harass the maintener\n",
-		       dev->name);
+		netdev_err(dev, "failure (Arf). Harass the maintainer\n");
 		goto out;
 	}
 	state &= ~ArAck;
@@ -1514,7 +1506,7 @@ static irqreturn_t dscc4_irq(int irq, void *token)
 		if (debug > 0)
 			printk(KERN_DEBUG "%s: CfgIV\n", DRV_NAME);
 		if (priv->iqcfg[priv->cfg_cur++%IRQ_RING_SIZE] & cpu_to_le32(Arf))
-			printk(KERN_ERR "%s: %s failed\n", dev->name, "CFG");
+			netdev_err(dev, "CFG failed\n");
 		if (!(state &= ~Cfg))
 			goto out;
 	}
@@ -1595,8 +1587,8 @@ try:
 				++dpriv->tx_dirty;
 			} else {
 				if (debug > 1)
-					printk(KERN_ERR "%s Tx: NULL skb %d\n",
-						dev->name, cur);
+					netdev_err(dev, "Tx: NULL skb %d\n",
+						   cur);
 			}
 			/*
 			 * If the driver ends sending crap on the wire, it
@@ -1615,7 +1607,7 @@ try:
 		 * Transmit Data Underrun
 		 */
 		if (state & Xdu) {
-			printk(KERN_ERR "%s: XDU. Ask maintainer\n", DRV_NAME);
+			netdev_err(dev, "Tx Data Underrun. Ask maintainer\n");
 			dpriv->flags = NeedIDT;
 			/* Tx reset */
 			writel(MTFi | Rdt,
@@ -1624,13 +1616,13 @@ try:
 			return;
 		}
 		if (state & Cts) {
-			printk(KERN_INFO "%s: CTS transition\n", dev->name);
+			netdev_info(dev, "CTS transition\n");
 			if (!(state &= ~Cts)) /* DEBUG */
 				goto try;
 		}
 		if (state & Xmr) {
 			/* Frame needs to be sent again - FIXME */
-			printk(KERN_ERR "%s: Xmr. Ask maintainer\n", DRV_NAME);
+			netdev_err(dev, "Tx ReTx. Ask maintainer\n");
 			if (!(state &= ~Xmr)) /* DEBUG */
 				goto try;
 		}
@@ -1648,7 +1640,7 @@ try:
 					break;
 			}
 			if (!i)
-				printk(KERN_INFO "%s busy in irq\n", dev->name);
+				netdev_info(dev, "busy in irq\n");
 
 			scc_addr = dpriv->base_addr + 0x0c*dpriv->dev_id;
 			/* Keep this order: IDT before IDR */
@@ -1685,7 +1677,7 @@ try:
 		}
 		if (state & Cd) {
 			if (debug > 0)
-				printk(KERN_INFO "%s: CD transition\n", dev->name);
+				netdev_info(dev, "CD transition\n");
 			if (!(state &= ~Cd)) /* DEBUG */
 				goto try;
 		}
@@ -1694,11 +1686,11 @@ try:
 #ifdef DSCC4_POLLING
 			while (!dscc4_tx_poll(dpriv, dev));
 #endif
-			printk(KERN_INFO "%s: Tx Hi\n", dev->name);
+			netdev_info(dev, "Tx Hi\n");
 			state &= ~Hi;
 		}
 		if (state & Err) {
-			printk(KERN_INFO "%s: Tx ERR\n", dev->name);
+			netdev_info(dev, "Tx ERR\n");
 			dev->stats.tx_errors++;
 			state &= ~Err;
 		}
@@ -1768,7 +1760,7 @@ try:
 			goto try;
 		}
 		if (state & Hi ) { /* HI bit */
-			printk(KERN_INFO "%s: Rx Hi\n", dev->name);
+			netdev_info(dev, "Rx Hi\n");
 			state &= ~Hi;
 			goto try;
 		}
@@ -1799,7 +1791,7 @@ try:
 				goto try;
 		}
 		if (state & Cts) {
-			printk(KERN_INFO "%s: CTS transition\n", dev->name);
+			netdev_info(dev, "CTS transition\n");
 			if (!(state &= ~Cts)) /* DEBUG */
 				goto try;
 		}
@@ -1858,14 +1850,12 @@ try:
 			       sizeof(struct RxFD), scc_addr + CH0BRDA);
 			writel(MTFi|Rdr|Idr, scc_addr + CH0CFG);
 			if (dscc4_do_action(dev, "RDR") < 0) {
-				printk(KERN_ERR "%s: RDO recovery failed(%s)\n",
-				       dev->name, "RDR");
+				netdev_err(dev, "RDO recovery failed(RDR)\n");
 				goto rdo_end;
 			}
 			writel(MTFi|Idr, scc_addr + CH0CFG);
 			if (dscc4_do_action(dev, "IDR") < 0) {
-				printk(KERN_ERR "%s: RDO recovery failed(%s)\n",
-				       dev->name, "IDR");
+				netdev_err(dev, "RDO recovery failed(IDR)\n");
 				goto rdo_end;
 			}
 		rdo_end:
@@ -1874,7 +1864,7 @@ try:
 			goto try;
 		}
 		if (state & Cd) {
-			printk(KERN_INFO "%s: CD transition\n", dev->name);
+			netdev_info(dev, "CD transition\n");
 			if (!(state &= ~Cd)) /* DEBUG */
 				goto try;
 		}
@@ -1975,7 +1965,7 @@ err_out:
 	return -ENOMEM;
 }
 
-static void __devexit dscc4_remove_one(struct pci_dev *pdev)
+static void dscc4_remove_one(struct pci_dev *pdev)
 {
 	struct dscc4_pci_priv *ppriv;
 	struct dscc4_dev_priv *root;
@@ -2060,18 +2050,7 @@ static struct pci_driver dscc4_driver = {
 	.name		= DRV_NAME,
 	.id_table	= dscc4_pci_tbl,
 	.probe		= dscc4_init_one,
-	.remove		= __devexit_p(dscc4_remove_one),
+	.remove		= dscc4_remove_one,
 };
 
-static int __init dscc4_init_module(void)
-{
-	return pci_register_driver(&dscc4_driver);
-}
-
-static void __exit dscc4_cleanup_module(void)
-{
-	pci_unregister_driver(&dscc4_driver);
-}
-
-module_init(dscc4_init_module);
-module_exit(dscc4_cleanup_module);
+module_pci_driver(dscc4_driver);