diff options
Diffstat (limited to 'drivers/net/usb/Kconfig')
| -rw-r--r-- | drivers/net/usb/Kconfig | 47 |
1 files changed, 43 insertions, 4 deletions
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index d84bfd4109a..7e7269fd370 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -92,11 +92,12 @@ config USB_RTL8150 module will be called rtl8150. config USB_RTL8152 - tristate "Realtek RTL8152 Based USB 2.0 Ethernet Adapters" + tristate "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters" select MII help This option adds support for Realtek RTL8152 based USB 2.0 - 10/100 Ethernet adapters. + 10/100 Ethernet adapters and RTL8153 based USB 3.0 10/100/1000 + Ethernet adapters. To compile this driver as a module, choose M here: the module will be called r8152. @@ -242,6 +243,21 @@ config USB_NET_CDC_NCM * ST-Ericsson M343 HSPA Mobile Broadband Modem (reference design) * Ericsson F5521gw Mobile Broadband Module +config USB_NET_HUAWEI_CDC_NCM + tristate "Huawei NCM embedded AT channel support" + depends on USB_USBNET + select USB_WDM + select USB_NET_CDC_NCM + help + This driver supports huawei-style NCM devices, that use NCM as a + transport for other protocols, usually an embedded AT channel. + Good examples are: + * Huawei E3131 + * Huawei E3251 + + To compile this driver as a module, choose M here: the module will be + called huawei_cdc_ncm.ko. + config USB_NET_CDC_MBIM tristate "CDC MBIM support" depends on USB_USBNET @@ -261,13 +277,36 @@ config USB_NET_CDC_MBIM module will be called cdc_mbim. config USB_NET_DM9601 - tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices" + tristate "Davicom DM96xx based USB 10/100 ethernet devices" + depends on USB_USBNET + select CRC32 + help + This option adds support for Davicom DM9601/DM9620/DM9621A + based USB 10/100 Ethernet adapters. + +config USB_NET_SR9700 + tristate "CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices" depends on USB_USBNET select CRC32 help - This option adds support for Davicom DM9601 based USB 1.1 + This option adds support for CoreChip-sz SR9700 based USB 1.1 10/100 Ethernet adapters. +config USB_NET_SR9800 + tristate "CoreChip-sz SR9800 based USB 2.0 10/100 ethernet devices" + depends on USB_USBNET + select CRC32 + ---help--- + Say Y if you want to use one of the following 100Mbps USB Ethernet + device based on the CoreChip-sz SR9800 chip. + + This driver makes the adapter appear as a normal Ethernet interface, + typically on eth0, if it is the only ethernet device, or perhaps on + eth1, if you have a PCI or ISA ethernet card installed. + + To compile this driver as a module, choose M here: the + module will be called sr9800. + config USB_NET_SMSC75XX tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices" depends on USB_USBNET |