diff options
Diffstat (limited to 'drivers/net/usb/Kconfig')
| -rw-r--r-- | drivers/net/usb/Kconfig | 142 |
1 files changed, 125 insertions, 17 deletions
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 23357612793..7e7269fd370 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -8,8 +8,7 @@ menu "USB Network Adapters" depends on USB && NET config USB_CATC - tristate "USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "USB CATC NetMate-based Ethernet device support" select CRC32 ---help--- Say Y if you want to use one of the following 10Mbps USB Ethernet @@ -68,7 +67,6 @@ config USB_KAWETH config USB_PEGASUS tristate "USB Pegasus/Pegasus-II based ethernet device support" - select NET_CORE select MII ---help--- Say Y here if you know you have Pegasus or Pegasus-II based adapter. @@ -83,9 +81,7 @@ config USB_PEGASUS module will be called pegasus. config USB_RTL8150 - tristate "USB RTL8150 based ethernet device support (EXPERIMENTAL)" - depends on EXPERIMENTAL - select NET_CORE + tristate "USB RTL8150 based ethernet device support" select MII help Say Y here if you have RTL8150 based usb-ethernet adapter. @@ -95,9 +91,19 @@ config USB_RTL8150 To compile this driver as a module, choose M here: the module will be called rtl8150. +config USB_RTL8152 + tristate "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters" + select MII + help + This option adds support for Realtek RTL8152 based USB 2.0 + 10/100 Ethernet adapters and RTL8153 based USB 3.0 10/100/1000 + Ethernet adapters. + + To compile this driver as a module, choose M here: the + module will be called r8152. + config USB_USBNET tristate "Multi-purpose USB Networking Framework" - select NET_CORE select MII ---help--- This driver supports several kinds of network links over USB, @@ -134,6 +140,7 @@ config USB_NET_AX8817X tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters" depends on USB_USBNET select CRC32 + select PHYLIB default y help This option adds support for ASIX AX88xxx based USB 2.0 @@ -157,6 +164,24 @@ config USB_NET_AX8817X This driver creates an interface named "ethX", where X depends on what other networking devices you have in use. +config USB_NET_AX88179_178A + tristate "ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet" + depends on USB_USBNET + select CRC32 + select PHYLIB + default y + help + This option adds support for ASIX AX88179 based USB 3.0/2.0 + to Gigabit Ethernet adapters. + + This driver should work with at least the following devices: + * ASIX AX88179 + * ASIX AX88178A + * Sitcomm LN-032 + + This driver creates an interface named "ethX", where X depends on + what other networking devices you have in use. + config USB_NET_CDCETHER tristate "CDC Ethernet support (smart devices such as cable modems)" depends on USB_USBNET @@ -187,7 +212,7 @@ config USB_NET_CDCETHER config USB_NET_CDC_EEM tristate "CDC EEM support" - depends on USB_USBNET && EXPERIMENTAL + depends on USB_USBNET help This option supports devices conforming to the Communication Device Class (CDC) Ethernet Emulation Model, a specification that's easy to @@ -218,25 +243,85 @@ config USB_NET_CDC_NCM * ST-Ericsson M343 HSPA Mobile Broadband Modem (reference design) * Ericsson F5521gw Mobile Broadband Module +config USB_NET_HUAWEI_CDC_NCM + tristate "Huawei NCM embedded AT channel support" + depends on USB_USBNET + select USB_WDM + select USB_NET_CDC_NCM + help + This driver supports huawei-style NCM devices, that use NCM as a + transport for other protocols, usually an embedded AT channel. + Good examples are: + * Huawei E3131 + * Huawei E3251 + + To compile this driver as a module, choose M here: the module will be + called huawei_cdc_ncm.ko. + +config USB_NET_CDC_MBIM + tristate "CDC MBIM support" + depends on USB_USBNET + select USB_WDM + select USB_NET_CDC_NCM + help + This driver provides support for CDC MBIM (Mobile Broadband + Interface Model) devices. The CDC MBIM specification is + available from <http://www.usb.org/>. + + MBIM devices require configuration using the management + protocol defined by the MBIM specification. This driver + provides unfiltered access to the MBIM control channel + through the associated /dev/cdc-wdmx character device. + + To compile this driver as a module, choose M here: the + module will be called cdc_mbim. + config USB_NET_DM9601 - tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices" + tristate "Davicom DM96xx based USB 10/100 ethernet devices" depends on USB_USBNET select CRC32 help - This option adds support for Davicom DM9601 based USB 1.1 + This option adds support for Davicom DM9601/DM9620/DM9621A + based USB 10/100 Ethernet adapters. + +config USB_NET_SR9700 + tristate "CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices" + depends on USB_USBNET + select CRC32 + help + This option adds support for CoreChip-sz SR9700 based USB 1.1 10/100 Ethernet adapters. +config USB_NET_SR9800 + tristate "CoreChip-sz SR9800 based USB 2.0 10/100 ethernet devices" + depends on USB_USBNET + select CRC32 + ---help--- + Say Y if you want to use one of the following 100Mbps USB Ethernet + device based on the CoreChip-sz SR9800 chip. + + This driver makes the adapter appear as a normal Ethernet interface, + typically on eth0, if it is the only ethernet device, or perhaps on + eth1, if you have a PCI or ISA ethernet card installed. + + To compile this driver as a module, choose M here: the + module will be called sr9800. + config USB_NET_SMSC75XX tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices" depends on USB_USBNET + select BITREVERSE + select CRC16 select CRC32 help - This option adds support for SMSC LAN95XX based USB 2.0 + This option adds support for SMSC LAN75XX based USB 2.0 Gigabit Ethernet adapters. config USB_NET_SMSC95XX tristate "SMSC LAN95XX based USB 2.0 10/100 ethernet devices" depends on USB_USBNET + select BITREVERSE + select CRC16 select CRC32 help This option adds support for SMSC LAN95XX based USB 2.0 @@ -264,7 +349,7 @@ config USB_NET_PLUSB tristate "Prolific PL-2301/2302/25A1 based cables" # if the handshake/init/reset problems, from original 'plusb', # are ever resolved ... then remove "experimental" - depends on USB_USBNET && EXPERIMENTAL + depends on USB_USBNET help Choose this option if you're using a host-to-host cable with one of these chips. @@ -278,8 +363,8 @@ config USB_NET_MCS7830 adapters marketed under the DeLOCK brand. config USB_NET_RNDIS_HOST - tristate "Host for RNDIS and ActiveSync devices (EXPERIMENTAL)" - depends on USB_USBNET && EXPERIMENTAL + tristate "Host for RNDIS and ActiveSync devices" + depends on USB_USBNET select USB_NET_CDCETHER help This option enables hosting "Remote NDIS" USB networking links, @@ -357,7 +442,7 @@ config USB_EPSON2888 config USB_KC2190 boolean "KT Technology KC2190 based cables (InstaNet)" - depends on USB_NET_CDC_SUBSET && EXPERIMENTAL + depends on USB_NET_CDC_SUBSET help Choose this option if you're using a host-to-host cable with one of these chips. @@ -398,9 +483,31 @@ config USB_NET_KALMIA To compile this driver as a module, choose M here: the module will be called kalmia. +config USB_NET_QMI_WWAN + tristate "QMI WWAN driver for Qualcomm MSM based 3G and LTE modems" + depends on USB_USBNET + select USB_WDM + help + Support WWAN LTE/3G devices based on Qualcomm Mobile Data Modem + (MDM) chipsets. Examples of such devices are + * Huawei E392/E398 + + This driver will only drive the ethernet part of the chips. + The devices require additional configuration to be usable. + Multiple management interfaces with linux drivers are + available: + + * option: AT commands on /dev/ttyUSBx + * cdc-wdm: Qualcomm MSM Interface (QMI) protocol on /dev/cdc-wdmx + + A modem manager with support for QMI is recommended. + + To compile this driver as a module, choose M here: the + module will be called qmi_wwan. + config USB_HSO tristate "Option USB High Speed Mobile Devices" - depends on USB && RFKILL + depends on USB && RFKILL && TTY default n help Choose this option if you have an Option HSDPA/HSUPA card. @@ -448,7 +555,7 @@ config USB_SIERRA_NET config USB_VL600 tristate "LG VL600 modem dongle" - depends on USB_NET_CDCETHER + depends on USB_NET_CDCETHER && TTY select USB_ACM help Select this if you want to use an LG Electronics 4G/LTE usb modem @@ -461,4 +568,5 @@ config USB_VL600 http://ubuntuforums.org/showpost.php?p=10589647&postcount=17 + endmenu |