diff options
Diffstat (limited to 'drivers/net/tulip')
| -rw-r--r-- | drivers/net/tulip/21142.c | 260 | ||||
| -rw-r--r-- | drivers/net/tulip/Kconfig | 171 | ||||
| -rw-r--r-- | drivers/net/tulip/Makefile | 17 | ||||
| -rw-r--r-- | drivers/net/tulip/de2104x.c | 2229 | ||||
| -rw-r--r-- | drivers/net/tulip/de4x5.c | 5603 | ||||
| -rw-r--r-- | drivers/net/tulip/de4x5.h | 1019 | ||||
| -rw-r--r-- | drivers/net/tulip/dmfe.c | 2258 | ||||
| -rw-r--r-- | drivers/net/tulip/eeprom.c | 385 | ||||
| -rw-r--r-- | drivers/net/tulip/interrupt.c | 811 | ||||
| -rw-r--r-- | drivers/net/tulip/media.c | 557 | ||||
| -rw-r--r-- | drivers/net/tulip/pnic.c | 172 | ||||
| -rw-r--r-- | drivers/net/tulip/pnic2.c | 406 | ||||
| -rw-r--r-- | drivers/net/tulip/timer.c | 182 | ||||
| -rw-r--r-- | drivers/net/tulip/tulip.h | 575 | ||||
| -rw-r--r-- | drivers/net/tulip/tulip_core.c | 2011 | ||||
| -rw-r--r-- | drivers/net/tulip/uli526x.c | 1871 | ||||
| -rw-r--r-- | drivers/net/tulip/winbond-840.c | 1673 | ||||
| -rw-r--r-- | drivers/net/tulip/xircom_cb.c | 1252 |
18 files changed, 0 insertions, 21452 deletions
diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c deleted file mode 100644 index 007d8e75666..00000000000 --- a/drivers/net/tulip/21142.c +++ /dev/null @@ -1,260 +0,0 @@ -/* - drivers/net/tulip/21142.c - - Copyright 2000,2001 The Linux Kernel Team - Written/copyright 1994-2001 by Donald Becker. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - - DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller - Hardware Reference Manual" is currently available at : - http://developer.intel.com/design/network/manuals/278074.htm - - Please submit bugs to http://bugzilla.kernel.org/ . -*/ - -#include <linux/delay.h> -#include "tulip.h" - - -static u16 t21142_csr13[] = { 0x0001, 0x0009, 0x0009, 0x0000, 0x0001, }; -u16 t21142_csr14[] = { 0xFFFF, 0x0705, 0x0705, 0x0000, 0x7F3D, }; -static u16 t21142_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, }; - - -/* Handle the 21143 uniquely: do autoselect with NWay, not the EEPROM list - of available transceivers. */ -void t21142_media_task(struct work_struct *work) -{ - struct tulip_private *tp = - container_of(work, struct tulip_private, media_work); - struct net_device *dev = tp->dev; - void __iomem *ioaddr = tp->base_addr; - int csr12 = ioread32(ioaddr + CSR12); - int next_tick = 60*HZ; - int new_csr6 = 0; - int csr14 = ioread32(ioaddr + CSR14); - - /* CSR12[LS10,LS100] are not reliable during autonegotiation */ - if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000) - csr12 |= 6; - if (tulip_debug > 2) - dev_info(&dev->dev, "21143 negotiation status %08x, %s\n", - csr12, medianame[dev->if_port]); - if (tulip_media_cap[dev->if_port] & MediaIsMII) { - if (tulip_check_duplex(dev) < 0) { - netif_carrier_off(dev); - next_tick = 3*HZ; - } else { - netif_carrier_on(dev); - next_tick = 60*HZ; - } - } else if (tp->nwayset) { - /* Don't screw up a negotiated session! */ - if (tulip_debug > 1) - dev_info(&dev->dev, - "Using NWay-set %s media, csr12 %08x\n", - medianame[dev->if_port], csr12); - } else if (tp->medialock) { - ; - } else if (dev->if_port == 3) { - if (csr12 & 2) { /* No 100mbps link beat, revert to 10mbps. */ - if (tulip_debug > 1) - dev_info(&dev->dev, - "No 21143 100baseTx link beat, %08x, trying NWay\n", - csr12); - t21142_start_nway(dev); - next_tick = 3*HZ; - } - } else if ((csr12 & 0x7000) != 0x5000) { - /* Negotiation failed. Search media types. */ - if (tulip_debug > 1) - dev_info(&dev->dev, - "21143 negotiation failed, status %08x\n", - csr12); - if (!(csr12 & 4)) { /* 10mbps link beat good. */ - new_csr6 = 0x82420000; - dev->if_port = 0; - iowrite32(0, ioaddr + CSR13); - iowrite32(0x0003FFFF, ioaddr + CSR14); - iowrite16(t21142_csr15[dev->if_port], ioaddr + CSR15); - iowrite32(t21142_csr13[dev->if_port], ioaddr + CSR13); - } else { - /* Select 100mbps port to check for link beat. */ - new_csr6 = 0x83860000; - dev->if_port = 3; - iowrite32(0, ioaddr + CSR13); - iowrite32(0x0003FFFF, ioaddr + CSR14); - iowrite16(8, ioaddr + CSR15); - iowrite32(1, ioaddr + CSR13); - } - if (tulip_debug > 1) - dev_info(&dev->dev, "Testing new 21143 media %s\n", - medianame[dev->if_port]); - if (new_csr6 != (tp->csr6 & ~0x00D5)) { - tp->csr6 &= 0x00D5; - tp->csr6 |= new_csr6; - iowrite32(0x0301, ioaddr + CSR12); - tulip_restart_rxtx(tp); - } - next_tick = 3*HZ; - } - - /* mod_timer synchronizes us with potential add_timer calls - * from interrupts. - */ - mod_timer(&tp->timer, RUN_AT(next_tick)); -} - - -void t21142_start_nway(struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - int csr14 = ((tp->sym_advertise & 0x0780) << 9) | - ((tp->sym_advertise & 0x0020) << 1) | 0xffbf; - - dev->if_port = 0; - tp->nway = tp->mediasense = 1; - tp->nwayset = tp->lpar = 0; - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Restarting 21143 autonegotiation, csr14=%08x\n", - dev->name, csr14); - iowrite32(0x0001, ioaddr + CSR13); - udelay(100); - iowrite32(csr14, ioaddr + CSR14); - tp->csr6 = 0x82420000 | (tp->sym_advertise & 0x0040 ? FullDuplex : 0); - iowrite32(tp->csr6, ioaddr + CSR6); - if (tp->mtable && tp->mtable->csr15dir) { - iowrite32(tp->mtable->csr15dir, ioaddr + CSR15); - iowrite32(tp->mtable->csr15val, ioaddr + CSR15); - } else - iowrite16(0x0008, ioaddr + CSR15); - iowrite32(0x1301, ioaddr + CSR12); /* Trigger NWAY. */ -} - - - -void t21142_lnk_change(struct net_device *dev, int csr5) -{ - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - int csr12 = ioread32(ioaddr + CSR12); - int csr14 = ioread32(ioaddr + CSR14); - - /* CSR12[LS10,LS100] are not reliable during autonegotiation */ - if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000) - csr12 |= 6; - if (tulip_debug > 1) - dev_info(&dev->dev, - "21143 link status interrupt %08x, CSR5 %x, %08x\n", - csr12, csr5, csr14); - - /* If NWay finished and we have a negotiated partner capability. */ - if (tp->nway && !tp->nwayset && (csr12 & 0x7000) == 0x5000) { - int setup_done = 0; - int negotiated = tp->sym_advertise & (csr12 >> 16); - tp->lpar = csr12 >> 16; - tp->nwayset = 1; - /* If partner cannot negotiate, it is 10Mbps Half Duplex */ - if (!(csr12 & 0x8000)) dev->if_port = 0; - else if (negotiated & 0x0100) dev->if_port = 5; - else if (negotiated & 0x0080) dev->if_port = 3; - else if (negotiated & 0x0040) dev->if_port = 4; - else if (negotiated & 0x0020) dev->if_port = 0; - else { - tp->nwayset = 0; - if ((csr12 & 2) == 0 && (tp->sym_advertise & 0x0180)) - dev->if_port = 3; - } - tp->full_duplex = (tulip_media_cap[dev->if_port] & MediaAlwaysFD) ? 1:0; - - if (tulip_debug > 1) { - if (tp->nwayset) - dev_info(&dev->dev, - "Switching to %s based on link negotiation %04x & %04x = %04x\n", - medianame[dev->if_port], - tp->sym_advertise, tp->lpar, - negotiated); - else - dev_info(&dev->dev, - "Autonegotiation failed, using %s, link beat status %04x\n", - medianame[dev->if_port], csr12); - } - - if (tp->mtable) { - int i; - for (i = 0; i < tp->mtable->leafcount; i++) - if (tp->mtable->mleaf[i].media == dev->if_port) { - int startup = ! ((tp->chip_id == DC21143 && (tp->revision == 48 || tp->revision == 65))); - tp->cur_index = i; - tulip_select_media(dev, startup); - setup_done = 1; - break; - } - } - if ( ! setup_done) { - tp->csr6 = (dev->if_port & 1 ? 0x838E0000 : 0x82420000) | (tp->csr6 & 0x20ff); - if (tp->full_duplex) - tp->csr6 |= 0x0200; - iowrite32(1, ioaddr + CSR13); - } -#if 0 /* Restart shouldn't be needed. */ - iowrite32(tp->csr6 | RxOn, ioaddr + CSR6); - if (tulip_debug > 2) - printk(KERN_DEBUG "%s: Restarting Tx and Rx, CSR5 is %08x\n", - dev->name, ioread32(ioaddr + CSR5)); -#endif - tulip_start_rxtx(tp); - if (tulip_debug > 2) - printk(KERN_DEBUG "%s: Setting CSR6 %08x/%x CSR12 %08x\n", - dev->name, tp->csr6, ioread32(ioaddr + CSR6), - ioread32(ioaddr + CSR12)); - } else if ((tp->nwayset && (csr5 & 0x08000000) && - (dev->if_port == 3 || dev->if_port == 5) && - (csr12 & 2) == 2) || - (tp->nway && (csr5 & (TPLnkFail)))) { - /* Link blew? Maybe restart NWay. */ - del_timer_sync(&tp->timer); - t21142_start_nway(dev); - tp->timer.expires = RUN_AT(3*HZ); - add_timer(&tp->timer); - } else if (dev->if_port == 3 || dev->if_port == 5) { - if (tulip_debug > 1) - dev_info(&dev->dev, "21143 %s link beat %s\n", - medianame[dev->if_port], - (csr12 & 2) ? "failed" : "good"); - if ((csr12 & 2) && ! tp->medialock) { - del_timer_sync(&tp->timer); - t21142_start_nway(dev); - tp->timer.expires = RUN_AT(3*HZ); - add_timer(&tp->timer); - } else if (dev->if_port == 5) - iowrite32(csr14 & ~0x080, ioaddr + CSR14); - } else if (dev->if_port == 0 || dev->if_port == 4) { - if ((csr12 & 4) == 0) - dev_info(&dev->dev, "21143 10baseT link beat good\n"); - } else if (!(csr12 & 4)) { /* 10mbps link beat good. */ - if (tulip_debug) - dev_info(&dev->dev, "21143 10mbps sensed media\n"); - dev->if_port = 0; - } else if (tp->nwayset) { - if (tulip_debug) - dev_info(&dev->dev, "21143 using NWay-set %s, csr6 %08x\n", - medianame[dev->if_port], tp->csr6); - } else { /* 100mbps link beat good. */ - if (tulip_debug) - dev_info(&dev->dev, "21143 100baseTx sensed media\n"); - dev->if_port = 3; - tp->csr6 = 0x838E0000 | (tp->csr6 & 0x20ff); - iowrite32(0x0003FF7F, ioaddr + CSR14); - iowrite32(0x0301, ioaddr + CSR12); - tulip_restart_rxtx(tp); - } -} - - diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig deleted file mode 100644 index 1f8d4a8d8ea..00000000000 --- a/drivers/net/tulip/Kconfig +++ /dev/null @@ -1,171 +0,0 @@ -# -# Tulip family network device configuration -# - -menuconfig NET_TULIP - bool "\"Tulip\" family network device support" - depends on PCI || EISA || CARDBUS - help - This selects the "Tulip" family of EISA/PCI network cards. - -if NET_TULIP - -config DE2104X - tristate "Early DECchip Tulip (dc2104x) PCI support" - depends on PCI - select CRC32 - ---help--- - This driver is developed for the SMC EtherPower series Ethernet - cards and also works with cards based on the DECchip - 21040 (Tulip series) chips. Some LinkSys PCI cards are - of this type. (If your card is NOT SMC EtherPower 10/100 PCI - (smc9332dst), you can also try the driver for "Generic DECchip" - cards, below. However, most people with a network card of this type - will say Y here.) Do read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module will - be called de2104x. - -config DE2104X_DSL - int "Descriptor Skip Length in 32 bit longwords" - depends on DE2104X - range 0 31 - default 0 - help - Setting this value allows to align ring buffer descriptors into their - own cache lines. Value of 4 corresponds to the typical 32 byte line - (the descriptor is 16 bytes). This is necessary on systems that lack - cache coherence, an example is PowerMac 5500. Otherwise 0 is safe. - Default is 0, and range is 0 to 31. - -config TULIP - tristate "DECchip Tulip (dc2114x) PCI support" - depends on PCI - select CRC32 - ---help--- - This driver is developed for the SMC EtherPower series Ethernet - cards and also works with cards based on the DECchip - 21140 (Tulip series) chips. Some LinkSys PCI cards are - of this type. (If your card is NOT SMC EtherPower 10/100 PCI - (smc9332dst), you can also try the driver for "Generic DECchip" - cards, above. However, most people with a network card of this type - will say Y here.) Do read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module will - be called tulip. - -config TULIP_MWI - bool "New bus configuration (EXPERIMENTAL)" - depends on TULIP && EXPERIMENTAL - help - This configures your Tulip card specifically for the card and - system cache line size type you are using. - - This is experimental code, not yet tested on many boards. - - If unsure, say N. - -config TULIP_MMIO - bool "Use PCI shared mem for NIC registers" - depends on TULIP - help - Use PCI shared memory for the NIC registers, rather than going through - the Tulip's PIO (programmed I/O ports). Faster, but could produce - obscure bugs if your mainboard has memory controller timing issues. - If in doubt, say N. - -config TULIP_NAPI - bool "Use RX polling (NAPI)" - depends on TULIP - help - NAPI is a new driver API designed to reduce CPU and interrupt load - when the driver is receiving lots of packets from the card. It is - still somewhat experimental and thus not yet enabled by default. - - If your estimated Rx load is 10kpps or more, or if the card will be - deployed on potentially unfriendly networks (e.g. in a firewall), - then say Y here. - - If in doubt, say N. - -config TULIP_NAPI_HW_MITIGATION - bool "Use Interrupt Mitigation" - depends on TULIP_NAPI - ---help--- - Use HW to reduce RX interrupts. Not strictly necessary since NAPI - reduces RX interrupts by itself. Interrupt mitigation reduces RX - interrupts even at low levels of traffic at the cost of a small - latency. - - If in doubt, say Y. - -config TULIP_DM910X - def_bool y - depends on TULIP && SPARC - -config DE4X5 - tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA" - depends on PCI || EISA - select CRC32 - ---help--- - This is support for the DIGITAL series of PCI/EISA Ethernet cards. - These include the DE425, DE434, DE435, DE450 and DE500 models. If - you have a network card of this type, say Y and read the - Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. More specific - information is contained in - <file:Documentation/networking/de4x5.txt>. - - To compile this driver as a module, choose M here. The module will - be called de4x5. - -config WINBOND_840 - tristate "Winbond W89c840 Ethernet support" - depends on PCI - select CRC32 - select MII - help - This driver is for the Winbond W89c840 chip. It also works with - the TX9882 chip on the Compex RL100-ATX board. - More specific information and updates are available from - <http://www.scyld.com/network/drivers.html>. - -config DM9102 - tristate "Davicom DM910x/DM980x support" - depends on PCI - select CRC32 - ---help--- - This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from - Davicom (<http://www.davicom.com.tw/>). If you have such a network - (Ethernet) card, say Y. Some information is contained in the file - <file:Documentation/networking/dmfe.txt>. - - To compile this driver as a module, choose M here. The module will - be called dmfe. - -config ULI526X - tristate "ULi M526x controller support" - depends on PCI - select CRC32 - ---help--- - This driver is for ULi M5261/M5263 10/100M Ethernet Controller - (<http://www.nvidia.com/page/uli_drivers.html>). - - To compile this driver as a module, choose M here. The module will - be called uli526x. - -config PCMCIA_XIRCOM - tristate "Xircom CardBus support" - depends on CARDBUS - ---help--- - This driver is for the Digital "Tulip" Ethernet CardBus adapters. - It should work with most DEC 21*4*-based chips/ethercards, as well - as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and - ASIX. - - To compile this driver as a module, choose M here. The module will - be called xircom_cb. If unsure, say N. - -endif # NET_TULIP diff --git a/drivers/net/tulip/Makefile b/drivers/net/tulip/Makefile deleted file mode 100644 index 200cbf7c815..00000000000 --- a/drivers/net/tulip/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -# -# Makefile for the Linux "Tulip" family network device drivers. -# - -obj-$(CONFIG_PCMCIA_XIRCOM) += xircom_cb.o -obj-$(CONFIG_DM9102) += dmfe.o -obj-$(CONFIG_WINBOND_840) += winbond-840.o -obj-$(CONFIG_DE2104X) += de2104x.o -obj-$(CONFIG_TULIP) += tulip.o -obj-$(CONFIG_DE4X5) += de4x5.o -obj-$(CONFIG_ULI526X) += uli526x.o - -# Declare multi-part drivers. - -tulip-objs := eeprom.o interrupt.o media.o \ - timer.o tulip_core.o \ - 21142.o pnic.o pnic2.o diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c deleted file mode 100644 index c78a50586c1..00000000000 --- a/drivers/net/tulip/de2104x.c +++ /dev/null @@ -1,2229 +0,0 @@ -/* de2104x.c: A Linux PCI Ethernet driver for Intel/Digital 21040/1 chips. */ -/* - Copyright 2001,2003 Jeff Garzik <jgarzik@pobox.com> - - Copyright 1994, 1995 Digital Equipment Corporation. [de4x5.c] - Written/copyright 1994-2001 by Donald Becker. [tulip.c] - - This software may be used and distributed according to the terms of - the GNU General Public License (GPL), incorporated herein by reference. - Drivers based on or derived from this code fall under the GPL and must - retain the authorship, copyright and license notice. This file is not - a complete program and may only be used when the entire operating - system is licensed under the GPL. - - See the file COPYING in this distribution for more information. - - TODO, in rough priority order: - * Support forcing media type with a module parameter, - like dl2k.c/sundance.c - * Constants (module parms?) for Rx work limit - * Complete reset on PciErr - * Jumbo frames / dev->change_mtu - * Adjust Rx FIFO threshold and Max Rx DMA burst on Rx FIFO error - * Adjust Tx FIFO threshold and Max Tx DMA burst on Tx FIFO error - * Implement Tx software interrupt mitigation via - Tx descriptor bit - - */ - -#define DRV_NAME "de2104x" -#define DRV_VERSION "0.7" -#define DRV_RELDATE "Mar 17, 2004" - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/ethtool.h> -#include <linux/compiler.h> -#include <linux/rtnetlink.h> -#include <linux/crc32.h> -#include <linux/slab.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/unaligned.h> - -/* These identify the driver base version and may not be removed. */ -static char version[] = -KERN_INFO DRV_NAME " PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")\n"; - -MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>"); -MODULE_DESCRIPTION("Intel/Digital 21040/1 series PCI Ethernet driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); - -static int debug = -1; -module_param (debug, int, 0); -MODULE_PARM_DESC (debug, "de2104x bitmapped message enable number"); - -/* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */ -#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \ - defined(CONFIG_SPARC) || defined(__ia64__) || \ - defined(__sh__) || defined(__mips__) -static int rx_copybreak = 1518; -#else -static int rx_copybreak = 100; -#endif -module_param (rx_copybreak, int, 0); -MODULE_PARM_DESC (rx_copybreak, "de2104x Breakpoint at which Rx packets are copied"); - -#define PFX DRV_NAME ": " - -#define DE_DEF_MSG_ENABLE (NETIF_MSG_DRV | \ - NETIF_MSG_PROBE | \ - NETIF_MSG_LINK | \ - NETIF_MSG_IFDOWN | \ - NETIF_MSG_IFUP | \ - NETIF_MSG_RX_ERR | \ - NETIF_MSG_TX_ERR) - -/* Descriptor skip length in 32 bit longwords. */ -#ifndef CONFIG_DE2104X_DSL -#define DSL 0 -#else -#define DSL CONFIG_DE2104X_DSL -#endif - -#define DE_RX_RING_SIZE 64 -#define DE_TX_RING_SIZE 64 -#define DE_RING_BYTES \ - ((sizeof(struct de_desc) * DE_RX_RING_SIZE) + \ - (sizeof(struct de_desc) * DE_TX_RING_SIZE)) -#define NEXT_TX(N) (((N) + 1) & (DE_TX_RING_SIZE - 1)) -#define NEXT_RX(N) (((N) + 1) & (DE_RX_RING_SIZE - 1)) -#define TX_BUFFS_AVAIL(CP) \ - (((CP)->tx_tail <= (CP)->tx_head) ? \ - (CP)->tx_tail + (DE_TX_RING_SIZE - 1) - (CP)->tx_head : \ - (CP)->tx_tail - (CP)->tx_head - 1) - -#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ -#define RX_OFFSET 2 - -#define DE_SETUP_SKB ((struct sk_buff *) 1) -#define DE_DUMMY_SKB ((struct sk_buff *) 2) -#define DE_SETUP_FRAME_WORDS 96 -#define DE_EEPROM_WORDS 256 -#define DE_EEPROM_SIZE (DE_EEPROM_WORDS * sizeof(u16)) -#define DE_MAX_MEDIA 5 - -#define DE_MEDIA_TP_AUTO 0 -#define DE_MEDIA_BNC 1 -#define DE_MEDIA_AUI 2 -#define DE_MEDIA_TP 3 -#define DE_MEDIA_TP_FD 4 -#define DE_MEDIA_INVALID DE_MAX_MEDIA -#define DE_MEDIA_FIRST 0 -#define DE_MEDIA_LAST (DE_MAX_MEDIA - 1) -#define DE_AUI_BNC (SUPPORTED_AUI | SUPPORTED_BNC) - -#define DE_TIMER_LINK (60 * HZ) -#define DE_TIMER_NO_LINK (5 * HZ) - -#define DE_NUM_REGS 16 -#define DE_REGS_SIZE (DE_NUM_REGS * sizeof(u32)) -#define DE_REGS_VER 1 - -/* Time in jiffies before concluding the transmitter is hung. */ -#define TX_TIMEOUT (6*HZ) - -/* This is a mysterious value that can be written to CSR11 in the 21040 (only) - to support a pre-NWay full-duplex signaling mechanism using short frames. - No one knows what it should be, but if left at its default value some - 10base2(!) packets trigger a full-duplex-request interrupt. */ -#define FULL_DUPLEX_MAGIC 0x6969 - -enum { - /* NIC registers */ - BusMode = 0x00, - TxPoll = 0x08, - RxPoll = 0x10, - RxRingAddr = 0x18, - TxRingAddr = 0x20, - MacStatus = 0x28, - MacMode = 0x30, - IntrMask = 0x38, - RxMissed = 0x40, - ROMCmd = 0x48, - CSR11 = 0x58, - SIAStatus = 0x60, - CSR13 = 0x68, - CSR14 = 0x70, - CSR15 = 0x78, - PCIPM = 0x40, - - /* BusMode bits */ - CmdReset = (1 << 0), - CacheAlign16 = 0x00008000, - BurstLen4 = 0x00000400, - DescSkipLen = (DSL << 2), - - /* Rx/TxPoll bits */ - NormalTxPoll = (1 << 0), - NormalRxPoll = (1 << 0), - - /* Tx/Rx descriptor status bits */ - DescOwn = (1 << 31), - RxError = (1 << 15), - RxErrLong = (1 << 7), - RxErrCRC = (1 << 1), - RxErrFIFO = (1 << 0), - RxErrRunt = (1 << 11), - RxErrFrame = (1 << 14), - RingEnd = (1 << 25), - FirstFrag = (1 << 29), - LastFrag = (1 << 30), - TxError = (1 << 15), - TxFIFOUnder = (1 << 1), - TxLinkFail = (1 << 2) | (1 << 10) | (1 << 11), - TxMaxCol = (1 << 8), - TxOWC = (1 << 9), - TxJabber = (1 << 14), - SetupFrame = (1 << 27), - TxSwInt = (1 << 31), - - /* MacStatus bits */ - IntrOK = (1 << 16), - IntrErr = (1 << 15), - RxIntr = (1 << 6), - RxEmpty = (1 << 7), - TxIntr = (1 << 0), - TxEmpty = (1 << 2), - PciErr = (1 << 13), - TxState = (1 << 22) | (1 << 21) | (1 << 20), - RxState = (1 << 19) | (1 << 18) | (1 << 17), - LinkFail = (1 << 12), - LinkPass = (1 << 4), - RxStopped = (1 << 8), - TxStopped = (1 << 1), - - /* MacMode bits */ - TxEnable = (1 << 13), - RxEnable = (1 << 1), - RxTx = TxEnable | RxEnable, - FullDuplex = (1 << 9), - AcceptAllMulticast = (1 << 7), - AcceptAllPhys = (1 << 6), - BOCnt = (1 << 5), - MacModeClear = (1<<12) | (1<<11) | (1<<10) | (1<<8) | (1<<3) | - RxTx | BOCnt | AcceptAllPhys | AcceptAllMulticast, - - /* ROMCmd bits */ - EE_SHIFT_CLK = 0x02, /* EEPROM shift clock. */ - EE_CS = 0x01, /* EEPROM chip select. */ - EE_DATA_WRITE = 0x04, /* Data from the Tulip to EEPROM. */ - EE_WRITE_0 = 0x01, - EE_WRITE_1 = 0x05, - EE_DATA_READ = 0x08, /* Data from the EEPROM chip. */ - EE_ENB = (0x4800 | EE_CS), - - /* The EEPROM commands include the alway-set leading bit. */ - EE_READ_CMD = 6, - - /* RxMissed bits */ - RxMissedOver = (1 << 16), - RxMissedMask = 0xffff, - - /* SROM-related bits */ - SROMC0InfoLeaf = 27, - MediaBlockMask = 0x3f, - MediaCustomCSRs = (1 << 6), - - /* PCIPM bits */ - PM_Sleep = (1 << 31), - PM_Snooze = (1 << 30), - PM_Mask = PM_Sleep | PM_Snooze, - - /* SIAStatus bits */ - NWayState = (1 << 14) | (1 << 13) | (1 << 12), - NWayRestart = (1 << 12), - NonselPortActive = (1 << 9), - SelPortActive = (1 << 8), - LinkFailStatus = (1 << 2), - NetCxnErr = (1 << 1), -}; - -static const u32 de_intr_mask = - IntrOK | IntrErr | RxIntr | RxEmpty | TxIntr | TxEmpty | - LinkPass | LinkFail | PciErr; - -/* - * Set the programmable burst length to 4 longwords for all: - * DMA errors result without these values. Cache align 16 long. - */ -static const u32 de_bus_mode = CacheAlign16 | BurstLen4 | DescSkipLen; - -struct de_srom_media_block { - u8 opts; - u16 csr13; - u16 csr14; - u16 csr15; -} __packed; - -struct de_srom_info_leaf { - u16 default_media; - u8 n_blocks; - u8 unused; -} __packed; - -struct de_desc { - __le32 opts1; - __le32 opts2; - __le32 addr1; - __le32 addr2; -#if DSL - __le32 skip[DSL]; -#endif -}; - -struct media_info { - u16 type; /* DE_MEDIA_xxx */ - u16 csr13; - u16 csr14; - u16 csr15; -}; - -struct ring_info { - struct sk_buff *skb; - dma_addr_t mapping; -}; - -struct de_private { - unsigned tx_head; - unsigned tx_tail; - unsigned rx_tail; - - void __iomem *regs; - struct net_device *dev; - spinlock_t lock; - - struct de_desc *rx_ring; - struct de_desc *tx_ring; - struct ring_info tx_skb[DE_TX_RING_SIZE]; - struct ring_info rx_skb[DE_RX_RING_SIZE]; - unsigned rx_buf_sz; - dma_addr_t ring_dma; - - u32 msg_enable; - - struct net_device_stats net_stats; - - struct pci_dev *pdev; - - u16 setup_frame[DE_SETUP_FRAME_WORDS]; - - u32 media_type; - u32 media_supported; - u32 media_advertise; - struct media_info media[DE_MAX_MEDIA]; - struct timer_list media_timer; - - u8 *ee_data; - unsigned board_idx; - unsigned de21040 : 1; - unsigned media_lock : 1; -}; - - -static void de_set_rx_mode (struct net_device *dev); -static void de_tx (struct de_private *de); -static void de_clean_rings (struct de_private *de); -static void de_media_interrupt (struct de_private *de, u32 status); -static void de21040_media_timer (unsigned long data); -static void de21041_media_timer (unsigned long data); -static unsigned int de_ok_to_advertise (struct de_private *de, u32 new_media); - - -static DEFINE_PCI_DEVICE_TABLE(de_pci_tbl) = { - { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_PLUS, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, - { }, -}; -MODULE_DEVICE_TABLE(pci, de_pci_tbl); - -static const char * const media_name[DE_MAX_MEDIA] = { - "10baseT auto", - "BNC", - "AUI", - "10baseT-HD", - "10baseT-FD" -}; - -/* 21040 transceiver register settings: - * TP AUTO(unused), BNC(unused), AUI, TP, TP FD*/ -static u16 t21040_csr13[] = { 0, 0, 0x8F09, 0x8F01, 0x8F01, }; -static u16 t21040_csr14[] = { 0, 0, 0x0705, 0xFFFF, 0xFFFD, }; -static u16 t21040_csr15[] = { 0, 0, 0x0006, 0x0000, 0x0000, }; - -/* 21041 transceiver register settings: TP AUTO, BNC, AUI, TP, TP FD*/ -static u16 t21041_csr13[] = { 0xEF01, 0xEF09, 0xEF09, 0xEF01, 0xEF09, }; -static u16 t21041_csr14[] = { 0xFFFF, 0xF7FD, 0xF7FD, 0x7F3F, 0x7F3D, }; -/* If on-chip autonegotiation is broken, use half-duplex (FF3F) instead */ -static u16 t21041_csr14_brk[] = { 0xFF3F, 0xF7FD, 0xF7FD, 0x7F3F, 0x7F3D, }; -static u16 t21041_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, }; - - -#define dr32(reg) ioread32(de->regs + (reg)) -#define dw32(reg, val) iowrite32((val), de->regs + (reg)) - - -static void de_rx_err_acct (struct de_private *de, unsigned rx_tail, - u32 status, u32 len) -{ - if (netif_msg_rx_err (de)) - printk (KERN_DEBUG - "%s: rx err, slot %d status 0x%x len %d\n", - de->dev->name, rx_tail, status, len); - - if ((status & 0x38000300) != 0x0300) { - /* Ingore earlier buffers. */ - if ((status & 0xffff) != 0x7fff) { - if (netif_msg_rx_err(de)) - dev_warn(&de->dev->dev, - "Oversized Ethernet frame spanned multiple buffers, status %08x!\n", - status); - de->net_stats.rx_length_errors++; - } - } else if (status & RxError) { - /* There was a fatal error. */ - de->net_stats.rx_errors++; /* end of a packet.*/ - if (status & 0x0890) de->net_stats.rx_length_errors++; - if (status & RxErrCRC) de->net_stats.rx_crc_errors++; - if (status & RxErrFIFO) de->net_stats.rx_fifo_errors++; - } -} - -static void de_rx (struct de_private *de) -{ - unsigned rx_tail = de->rx_tail; - unsigned rx_work = DE_RX_RING_SIZE; - unsigned drop = 0; - int rc; - - while (--rx_work) { - u32 status, len; - dma_addr_t mapping; - struct sk_buff *skb, *copy_skb; - unsigned copying_skb, buflen; - - skb = de->rx_skb[rx_tail].skb; - BUG_ON(!skb); - rmb(); - status = le32_to_cpu(de->rx_ring[rx_tail].opts1); - if (status & DescOwn) - break; - - len = ((status >> 16) & 0x7ff) - 4; - mapping = de->rx_skb[rx_tail].mapping; - - if (unlikely(drop)) { - de->net_stats.rx_dropped++; - goto rx_next; - } - - if (unlikely((status & 0x38008300) != 0x0300)) { - de_rx_err_acct(de, rx_tail, status, len); - goto rx_next; - } - - copying_skb = (len <= rx_copybreak); - - if (unlikely(netif_msg_rx_status(de))) - printk(KERN_DEBUG "%s: rx slot %d status 0x%x len %d copying? %d\n", - de->dev->name, rx_tail, status, len, - copying_skb); - - buflen = copying_skb ? (len + RX_OFFSET) : de->rx_buf_sz; - copy_skb = dev_alloc_skb (buflen); - if (unlikely(!copy_skb)) { - de->net_stats.rx_dropped++; - drop = 1; - rx_work = 100; - goto rx_next; - } - - if (!copying_skb) { - pci_unmap_single(de->pdev, mapping, - buflen, PCI_DMA_FROMDEVICE); - skb_put(skb, len); - - mapping = - de->rx_skb[rx_tail].mapping = - pci_map_single(de->pdev, copy_skb->data, - buflen, PCI_DMA_FROMDEVICE); - de->rx_skb[rx_tail].skb = copy_skb; - } else { - pci_dma_sync_single_for_cpu(de->pdev, mapping, len, PCI_DMA_FROMDEVICE); - skb_reserve(copy_skb, RX_OFFSET); - skb_copy_from_linear_data(skb, skb_put(copy_skb, len), - len); - pci_dma_sync_single_for_device(de->pdev, mapping, len, PCI_DMA_FROMDEVICE); - - /* We'll reuse the original ring buffer. */ - skb = copy_skb; - } - - skb->protocol = eth_type_trans (skb, de->dev); - - de->net_stats.rx_packets++; - de->net_stats.rx_bytes += skb->len; - rc = netif_rx (skb); - if (rc == NET_RX_DROP) - drop = 1; - -rx_next: - if (rx_tail == (DE_RX_RING_SIZE - 1)) - de->rx_ring[rx_tail].opts2 = - cpu_to_le32(RingEnd | de->rx_buf_sz); - else - de->rx_ring[rx_tail].opts2 = cpu_to_le32(de->rx_buf_sz); - de->rx_ring[rx_tail].addr1 = cpu_to_le32(mapping); - wmb(); - de->rx_ring[rx_tail].opts1 = cpu_to_le32(DescOwn); - rx_tail = NEXT_RX(rx_tail); - } - - if (!rx_work) - dev_warn(&de->dev->dev, "rx work limit reached\n"); - - de->rx_tail = rx_tail; -} - -static irqreturn_t de_interrupt (int irq, void *dev_instance) -{ - struct net_device *dev = dev_instance; - struct de_private *de = netdev_priv(dev); - u32 status; - - status = dr32(MacStatus); - if ((!(status & (IntrOK|IntrErr))) || (status == 0xFFFF)) - return IRQ_NONE; - - if (netif_msg_intr(de)) - printk(KERN_DEBUG "%s: intr, status %08x mode %08x desc %u/%u/%u\n", - dev->name, status, dr32(MacMode), - de->rx_tail, de->tx_head, de->tx_tail); - - dw32(MacStatus, status); - - if (status & (RxIntr | RxEmpty)) { - de_rx(de); - if (status & RxEmpty) - dw32(RxPoll, NormalRxPoll); - } - - spin_lock(&de->lock); - - if (status & (TxIntr | TxEmpty)) - de_tx(de); - - if (status & (LinkPass | LinkFail)) - de_media_interrupt(de, status); - - spin_unlock(&de->lock); - - if (status & PciErr) { - u16 pci_status; - - pci_read_config_word(de->pdev, PCI_STATUS, &pci_status); - pci_write_config_word(de->pdev, PCI_STATUS, pci_status); - dev_err(&de->dev->dev, - "PCI bus error, status=%08x, PCI status=%04x\n", - status, pci_status); - } - - return IRQ_HANDLED; -} - -static void de_tx (struct de_private *de) -{ - unsigned tx_head = de->tx_head; - unsigned tx_tail = de->tx_tail; - - while (tx_tail != tx_head) { - struct sk_buff *skb; - u32 status; - - rmb(); - status = le32_to_cpu(de->tx_ring[tx_tail].opts1); - if (status & DescOwn) - break; - - skb = de->tx_skb[tx_tail].skb; - BUG_ON(!skb); - if (unlikely(skb == DE_DUMMY_SKB)) - goto next; - - if (unlikely(skb == DE_SETUP_SKB)) { - pci_unmap_single(de->pdev, de->tx_skb[tx_tail].mapping, - sizeof(de->setup_frame), PCI_DMA_TODEVICE); - goto next; - } - - pci_unmap_single(de->pdev, de->tx_skb[tx_tail].mapping, - skb->len, PCI_DMA_TODEVICE); - - if (status & LastFrag) { - if (status & TxError) { - if (netif_msg_tx_err(de)) - printk(KERN_DEBUG "%s: tx err, status 0x%x\n", - de->dev->name, status); - de->net_stats.tx_errors++; - if (status & TxOWC) - de->net_stats.tx_window_errors++; - if (status & TxMaxCol) - de->net_stats.tx_aborted_errors++; - if (status & TxLinkFail) - de->net_stats.tx_carrier_errors++; - if (status & TxFIFOUnder) - de->net_stats.tx_fifo_errors++; - } else { - de->net_stats.tx_packets++; - de->net_stats.tx_bytes += skb->len; - if (netif_msg_tx_done(de)) - printk(KERN_DEBUG "%s: tx done, slot %d\n", - de->dev->name, tx_tail); - } - dev_kfree_skb_irq(skb); - } - -next: - de->tx_skb[tx_tail].skb = NULL; - - tx_tail = NEXT_TX(tx_tail); - } - - de->tx_tail = tx_tail; - - if (netif_queue_stopped(de->dev) && (TX_BUFFS_AVAIL(de) > (DE_TX_RING_SIZE / 4))) - netif_wake_queue(de->dev); -} - -static netdev_tx_t de_start_xmit (struct sk_buff *skb, - struct net_device *dev) -{ - struct de_private *de = netdev_priv(dev); - unsigned int entry, tx_free; - u32 mapping, len, flags = FirstFrag | LastFrag; - struct de_desc *txd; - - spin_lock_irq(&de->lock); - - tx_free = TX_BUFFS_AVAIL(de); - if (tx_free == 0) { - netif_stop_queue(dev); - spin_unlock_irq(&de->lock); - return NETDEV_TX_BUSY; - } - tx_free--; - - entry = de->tx_head; - - txd = &de->tx_ring[entry]; - - len = skb->len; - mapping = pci_map_single(de->pdev, skb->data, len, PCI_DMA_TODEVICE); - if (entry == (DE_TX_RING_SIZE - 1)) - flags |= RingEnd; - if (!tx_free || (tx_free == (DE_TX_RING_SIZE / 2))) - flags |= TxSwInt; - flags |= len; - txd->opts2 = cpu_to_le32(flags); - txd->addr1 = cpu_to_le32(mapping); - - de->tx_skb[entry].skb = skb; - de->tx_skb[entry].mapping = mapping; - wmb(); - - txd->opts1 = cpu_to_le32(DescOwn); - wmb(); - - de->tx_head = NEXT_TX(entry); - if (netif_msg_tx_queued(de)) - printk(KERN_DEBUG "%s: tx queued, slot %d, skblen %d\n", - dev->name, entry, skb->len); - - if (tx_free == 0) - netif_stop_queue(dev); - - spin_unlock_irq(&de->lock); - - /* Trigger an immediate transmit demand. */ - dw32(TxPoll, NormalTxPoll); - - return NETDEV_TX_OK; -} - -/* Set or clear the multicast filter for this adaptor. - Note that we only use exclusion around actually queueing the - new frame, not around filling de->setup_frame. This is non-deterministic - when re-entered but still correct. */ - -#undef set_bit_le -#define set_bit_le(i,p) do { ((char *)(p))[(i)/8] |= (1<<((i)%8)); } while(0) - -static void build_setup_frame_hash(u16 *setup_frm, struct net_device *dev) -{ - struct de_private *de = netdev_priv(dev); - u16 hash_table[32]; - struct netdev_hw_addr *ha; - int i; - u16 *eaddrs; - - memset(hash_table, 0, sizeof(hash_table)); - set_bit_le(255, hash_table); /* Broadcast entry */ - /* This should work on big-endian machines as well. */ - netdev_for_each_mc_addr(ha, dev) { - int index = ether_crc_le(ETH_ALEN, ha->addr) & 0x1ff; - - set_bit_le(index, hash_table); - } - - for (i = 0; i < 32; i++) { - *setup_frm++ = hash_table[i]; - *setup_frm++ = hash_table[i]; - } - setup_frm = &de->setup_frame[13*6]; - - /* Fill the final entry with our physical address. */ - eaddrs = (u16 *)dev->dev_addr; - *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0]; - *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1]; - *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2]; -} - -static void build_setup_frame_perfect(u16 *setup_frm, struct net_device *dev) -{ - struct de_private *de = netdev_priv(dev); - struct netdev_hw_addr *ha; - u16 *eaddrs; - - /* We have <= 14 addresses so we can use the wonderful - 16 address perfect filtering of the Tulip. */ - netdev_for_each_mc_addr(ha, dev) { - eaddrs = (u16 *) ha->addr; - *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++; - *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++; - *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++; - } - /* Fill the unused entries with the broadcast address. */ - memset(setup_frm, 0xff, (15 - netdev_mc_count(dev)) * 12); - setup_frm = &de->setup_frame[15*6]; - - /* Fill the final entry with our physical address. */ - eaddrs = (u16 *)dev->dev_addr; - *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0]; - *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1]; - *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2]; -} - - -static void __de_set_rx_mode (struct net_device *dev) -{ - struct de_private *de = netdev_priv(dev); - u32 macmode; - unsigned int entry; - u32 mapping; - struct de_desc *txd; - struct de_desc *dummy_txd = NULL; - - macmode = dr32(MacMode) & ~(AcceptAllMulticast | AcceptAllPhys); - - if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ - macmode |= AcceptAllMulticast | AcceptAllPhys; - goto out; - } - - if ((netdev_mc_count(dev) > 1000) || (dev->flags & IFF_ALLMULTI)) { - /* Too many to filter well -- accept all multicasts. */ - macmode |= AcceptAllMulticast; - goto out; - } - - /* Note that only the low-address shortword of setup_frame is valid! - The values are doubled for big-endian architectures. */ - if (netdev_mc_count(dev) > 14) /* Must use a multicast hash table. */ - build_setup_frame_hash (de->setup_frame, dev); - else - build_setup_frame_perfect (de->setup_frame, dev); - - /* - * Now add this frame to the Tx list. - */ - - entry = de->tx_head; - - /* Avoid a chip errata by prefixing a dummy entry. */ - if (entry != 0) { - de->tx_skb[entry].skb = DE_DUMMY_SKB; - - dummy_txd = &de->tx_ring[entry]; - dummy_txd->opts2 = (entry == (DE_TX_RING_SIZE - 1)) ? - cpu_to_le32(RingEnd) : 0; - dummy_txd->addr1 = 0; - - /* Must set DescOwned later to avoid race with chip */ - - entry = NEXT_TX(entry); - } - - de->tx_skb[entry].skb = DE_SETUP_SKB; - de->tx_skb[entry].mapping = mapping = - pci_map_single (de->pdev, de->setup_frame, - sizeof (de->setup_frame), PCI_DMA_TODEVICE); - - /* Put the setup frame on the Tx list. */ - txd = &de->tx_ring[entry]; - if (entry == (DE_TX_RING_SIZE - 1)) - txd->opts2 = cpu_to_le32(SetupFrame | RingEnd | sizeof (de->setup_frame)); - else - txd->opts2 = cpu_to_le32(SetupFrame | sizeof (de->setup_frame)); - txd->addr1 = cpu_to_le32(mapping); - wmb(); - - txd->opts1 = cpu_to_le32(DescOwn); - wmb(); - - if (dummy_txd) { - dummy_txd->opts1 = cpu_to_le32(DescOwn); - wmb(); - } - - de->tx_head = NEXT_TX(entry); - - if (TX_BUFFS_AVAIL(de) == 0) - netif_stop_queue(dev); - - /* Trigger an immediate transmit demand. */ - dw32(TxPoll, NormalTxPoll); - -out: - if (macmode != dr32(MacMode)) - dw32(MacMode, macmode); -} - -static void de_set_rx_mode (struct net_device *dev) -{ - unsigned long flags; - struct de_private *de = netdev_priv(dev); - - spin_lock_irqsave (&de->lock, flags); - __de_set_rx_mode(dev); - spin_unlock_irqrestore (&de->lock, flags); -} - -static inline void de_rx_missed(struct de_private *de, u32 rx_missed) -{ - if (unlikely(rx_missed & RxMissedOver)) - de->net_stats.rx_missed_errors += RxMissedMask; - else - de->net_stats.rx_missed_errors += (rx_missed & RxMissedMask); -} - -static void __de_get_stats(struct de_private *de) -{ - u32 tmp = dr32(RxMissed); /* self-clearing */ - - de_rx_missed(de, tmp); -} - -static struct net_device_stats *de_get_stats(struct net_device *dev) -{ - struct de_private *de = netdev_priv(dev); - - /* The chip only need report frame silently dropped. */ - spin_lock_irq(&de->lock); - if (netif_running(dev) && netif_device_present(dev)) - __de_get_stats(de); - spin_unlock_irq(&de->lock); - - return &de->net_stats; -} - -static inline int de_is_running (struct de_private *de) -{ - return (dr32(MacStatus) & (RxState | TxState)) ? 1 : 0; -} - -static void de_stop_rxtx (struct de_private *de) -{ - u32 macmode; - unsigned int i = 1300/100; - - macmode = dr32(MacMode); - if (macmode & RxTx) { - dw32(MacMode, macmode & ~RxTx); - dr32(MacMode); - } - - /* wait until in-flight frame completes. - * Max time @ 10BT: 1500*8b/10Mbps == 1200us (+ 100us margin) - * Typically expect this loop to end in < 50 us on 100BT. - */ - while (--i) { - if (!de_is_running(de)) - return; - udelay(100); - } - - dev_warn(&de->dev->dev, "timeout expired stopping DMA\n"); -} - -static inline void de_start_rxtx (struct de_private *de) -{ - u32 macmode; - - macmode = dr32(MacMode); - if ((macmode & RxTx) != RxTx) { - dw32(MacMode, macmode | RxTx); - dr32(MacMode); - } -} - -static void de_stop_hw (struct de_private *de) -{ - - udelay(5); - dw32(IntrMask, 0); - - de_stop_rxtx(de); - - dw32(MacStatus, dr32(MacStatus)); - - udelay(10); - - de->rx_tail = 0; - de->tx_head = de->tx_tail = 0; -} - -static void de_link_up(struct de_private *de) -{ - if (!netif_carrier_ok(de->dev)) { - netif_carrier_on(de->dev); - if (netif_msg_link(de)) - dev_info(&de->dev->dev, "link up, media %s\n", - media_name[de->media_type]); - } -} - -static void de_link_down(struct de_private *de) -{ - if (netif_carrier_ok(de->dev)) { - netif_carrier_off(de->dev); - if (netif_msg_link(de)) - dev_info(&de->dev->dev, "link down\n"); - } -} - -static void de_set_media (struct de_private *de) -{ - unsigned media = de->media_type; - u32 macmode = dr32(MacMode); - - if (de_is_running(de)) - dev_warn(&de->dev->dev, - "chip is running while changing media!\n"); - - if (de->de21040) - dw32(CSR11, FULL_DUPLEX_MAGIC); - dw32(CSR13, 0); /* Reset phy */ - dw32(CSR14, de->media[media].csr14); - dw32(CSR15, de->media[media].csr15); - dw32(CSR13, de->media[media].csr13); - - /* must delay 10ms before writing to other registers, - * especially CSR6 - */ - mdelay(10); - - if (media == DE_MEDIA_TP_FD) - macmode |= FullDuplex; - else - macmode &= ~FullDuplex; - - if (netif_msg_link(de)) - dev_info(&de->dev->dev, "set link %s\n", media_name[media]); - if (netif_msg_hw(de)) { - dev_info(&de->dev->dev, "mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n", - dr32(MacMode), dr32(SIAStatus), - dr32(CSR13), dr32(CSR14), dr32(CSR15)); - - dev_info(&de->dev->dev, - "set mode 0x%x, set sia 0x%x,0x%x,0x%x\n", - macmode, de->media[media].csr13, - de->media[media].csr14, de->media[media].csr15); - } - if (macmode != dr32(MacMode)) - dw32(MacMode, macmode); -} - -static void de_next_media (struct de_private *de, u32 *media, - unsigned int n_media) -{ - unsigned int i; - - for (i = 0; i < n_media; i++) { - if (de_ok_to_advertise(de, media[i])) { - de->media_type = media[i]; - return; - } - } -} - -static void de21040_media_timer (unsigned long data) -{ - struct de_private *de = (struct de_private *) data; - struct net_device *dev = de->dev; - u32 status = dr32(SIAStatus); - unsigned int carrier; - unsigned long flags; - - carrier = (status & NetCxnErr) ? 0 : 1; - - if (carrier) { - if (de->media_type != DE_MEDIA_AUI && (status & LinkFailStatus)) - goto no_link_yet; - - de->media_timer.expires = jiffies + DE_TIMER_LINK; - add_timer(&de->media_timer); - if (!netif_carrier_ok(dev)) - de_link_up(de); - else - if (netif_msg_timer(de)) - dev_info(&dev->dev, "%s link ok, status %x\n", - media_name[de->media_type], status); - return; - } - - de_link_down(de); - - if (de->media_lock) - return; - - if (de->media_type == DE_MEDIA_AUI) { - u32 next_state = DE_MEDIA_TP; - de_next_media(de, &next_state, 1); - } else { - u32 next_state = DE_MEDIA_AUI; - de_next_media(de, &next_state, 1); - } - - spin_lock_irqsave(&de->lock, flags); - de_stop_rxtx(de); - spin_unlock_irqrestore(&de->lock, flags); - de_set_media(de); - de_start_rxtx(de); - -no_link_yet: - de->media_timer.expires = jiffies + DE_TIMER_NO_LINK; - add_timer(&de->media_timer); - - if (netif_msg_timer(de)) - dev_info(&dev->dev, "no link, trying media %s, status %x\n", - media_name[de->media_type], status); -} - -static unsigned int de_ok_to_advertise (struct de_private *de, u32 new_media) -{ - switch (new_media) { - case DE_MEDIA_TP_AUTO: - if (!(de->media_advertise & ADVERTISED_Autoneg)) - return 0; - if (!(de->media_advertise & (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full))) - return 0; - break; - case DE_MEDIA_BNC: - if (!(de->media_advertise & ADVERTISED_BNC)) - return 0; - break; - case DE_MEDIA_AUI: - if (!(de->media_advertise & ADVERTISED_AUI)) - return 0; - break; - case DE_MEDIA_TP: - if (!(de->media_advertise & ADVERTISED_10baseT_Half)) - return 0; - break; - case DE_MEDIA_TP_FD: - if (!(de->media_advertise & ADVERTISED_10baseT_Full)) - return 0; - break; - } - - return 1; -} - -static void de21041_media_timer (unsigned long data) -{ - struct de_private *de = (struct de_private *) data; - struct net_device *dev = de->dev; - u32 status = dr32(SIAStatus); - unsigned int carrier; - unsigned long flags; - - /* clear port active bits */ - dw32(SIAStatus, NonselPortActive | SelPortActive); - - carrier = (status & NetCxnErr) ? 0 : 1; - - if (carrier) { - if ((de->media_type == DE_MEDIA_TP_AUTO || - de->media_type == DE_MEDIA_TP || - de->media_type == DE_MEDIA_TP_FD) && - (status & LinkFailStatus)) - goto no_link_yet; - - de->media_timer.expires = jiffies + DE_TIMER_LINK; - add_timer(&de->media_timer); - if (!netif_carrier_ok(dev)) - de_link_up(de); - else - if (netif_msg_timer(de)) - dev_info(&dev->dev, - "%s link ok, mode %x status %x\n", - media_name[de->media_type], - dr32(MacMode), status); - return; - } - - de_link_down(de); - - /* if media type locked, don't switch media */ - if (de->media_lock) - goto set_media; - - /* if activity detected, use that as hint for new media type */ - if (status & NonselPortActive) { - unsigned int have_media = 1; - - /* if AUI/BNC selected, then activity is on TP port */ - if (de->media_type == DE_MEDIA_AUI || - de->media_type == DE_MEDIA_BNC) { - if (de_ok_to_advertise(de, DE_MEDIA_TP_AUTO)) - de->media_type = DE_MEDIA_TP_AUTO; - else - have_media = 0; - } - - /* TP selected. If there is only TP and BNC, then it's BNC */ - else if (((de->media_supported & DE_AUI_BNC) == SUPPORTED_BNC) && - de_ok_to_advertise(de, DE_MEDIA_BNC)) - de->media_type = DE_MEDIA_BNC; - - /* TP selected. If there is only TP and AUI, then it's AUI */ - else if (((de->media_supported & DE_AUI_BNC) == SUPPORTED_AUI) && - de_ok_to_advertise(de, DE_MEDIA_AUI)) - de->media_type = DE_MEDIA_AUI; - - /* otherwise, ignore the hint */ - else - have_media = 0; - - if (have_media) - goto set_media; - } - - /* - * Absent or ambiguous activity hint, move to next advertised - * media state. If de->media_type is left unchanged, this - * simply resets the PHY and reloads the current media settings. - */ - if (de->media_type == DE_MEDIA_AUI) { - u32 next_states[] = { DE_MEDIA_BNC, DE_MEDIA_TP_AUTO }; - de_next_media(de, next_states, ARRAY_SIZE(next_states)); - } else if (de->media_type == DE_MEDIA_BNC) { - u32 next_states[] = { DE_MEDIA_TP_AUTO, DE_MEDIA_AUI }; - de_next_media(de, next_states, ARRAY_SIZE(next_states)); - } else { - u32 next_states[] = { DE_MEDIA_AUI, DE_MEDIA_BNC, DE_MEDIA_TP_AUTO }; - de_next_media(de, next_states, ARRAY_SIZE(next_states)); - } - -set_media: - spin_lock_irqsave(&de->lock, flags); - de_stop_rxtx(de); - spin_unlock_irqrestore(&de->lock, flags); - de_set_media(de); - de_start_rxtx(de); - -no_link_yet: - de->media_timer.expires = jiffies + DE_TIMER_NO_LINK; - add_timer(&de->media_timer); - - if (netif_msg_timer(de)) - dev_info(&dev->dev, "no link, trying media %s, status %x\n", - media_name[de->media_type], status); -} - -static void de_media_interrupt (struct de_private *de, u32 status) -{ - if (status & LinkPass) { - /* Ignore if current media is AUI or BNC and we can't use TP */ - if ((de->media_type == DE_MEDIA_AUI || - de->media_type == DE_MEDIA_BNC) && - (de->media_lock || - !de_ok_to_advertise(de, DE_MEDIA_TP_AUTO))) - return; - /* If current media is not TP, change it to TP */ - if ((de->media_type == DE_MEDIA_AUI || - de->media_type == DE_MEDIA_BNC)) { - de->media_type = DE_MEDIA_TP_AUTO; - de_stop_rxtx(de); - de_set_media(de); - de_start_rxtx(de); - } - de_link_up(de); - mod_timer(&de->media_timer, jiffies + DE_TIMER_LINK); - return; - } - - BUG_ON(!(status & LinkFail)); - /* Mark the link as down only if current media is TP */ - if (netif_carrier_ok(de->dev) && de->media_type != DE_MEDIA_AUI && - de->media_type != DE_MEDIA_BNC) { - de_link_down(de); - mod_timer(&de->media_timer, jiffies + DE_TIMER_NO_LINK); - } -} - -static int de_reset_mac (struct de_private *de) -{ - u32 status, tmp; - - /* - * Reset MAC. de4x5.c and tulip.c examined for "advice" - * in this area. - */ - - if (dr32(BusMode) == 0xffffffff) - return -EBUSY; - - /* Reset the chip, holding bit 0 set at least 50 PCI cycles. */ - dw32 (BusMode, CmdReset); - mdelay (1); - - dw32 (BusMode, de_bus_mode); - mdelay (1); - - for (tmp = 0; tmp < 5; tmp++) { - dr32 (BusMode); - mdelay (1); - } - - mdelay (1); - - status = dr32(MacStatus); - if (status & (RxState | TxState)) - return -EBUSY; - if (status == 0xffffffff) - return -ENODEV; - return 0; -} - -static void de_adapter_wake (struct de_private *de) -{ - u32 pmctl; - - if (de->de21040) - return; - - pci_read_config_dword(de->pdev, PCIPM, &pmctl); - if (pmctl & PM_Mask) { - pmctl &= ~PM_Mask; - pci_write_config_dword(de->pdev, PCIPM, pmctl); - - /* de4x5.c delays, so we do too */ - msleep(10); - } -} - -static void de_adapter_sleep (struct de_private *de) -{ - u32 pmctl; - - if (de->de21040) - return; - - dw32(CSR13, 0); /* Reset phy */ - pci_read_config_dword(de->pdev, PCIPM, &pmctl); - pmctl |= PM_Sleep; - pci_write_config_dword(de->pdev, PCIPM, pmctl); -} - -static int de_init_hw (struct de_private *de) -{ - struct net_device *dev = de->dev; - u32 macmode; - int rc; - - de_adapter_wake(de); - - macmode = dr32(MacMode) & ~MacModeClear; - - rc = de_reset_mac(de); - if (rc) - return rc; - - de_set_media(de); /* reset phy */ - - dw32(RxRingAddr, de->ring_dma); - dw32(TxRingAddr, de->ring_dma + (sizeof(struct de_desc) * DE_RX_RING_SIZE)); - - dw32(MacMode, RxTx | macmode); - - dr32(RxMissed); /* self-clearing */ - - dw32(IntrMask, de_intr_mask); - - de_set_rx_mode(dev); - - return 0; -} - -static int de_refill_rx (struct de_private *de) -{ - unsigned i; - - for (i = 0; i < DE_RX_RING_SIZE; i++) { - struct sk_buff *skb; - - skb = dev_alloc_skb(de->rx_buf_sz); - if (!skb) - goto err_out; - - skb->dev = de->dev; - - de->rx_skb[i].mapping = pci_map_single(de->pdev, - skb->data, de->rx_buf_sz, PCI_DMA_FROMDEVICE); - de->rx_skb[i].skb = skb; - - de->rx_ring[i].opts1 = cpu_to_le32(DescOwn); - if (i == (DE_RX_RING_SIZE - 1)) - de->rx_ring[i].opts2 = - cpu_to_le32(RingEnd | de->rx_buf_sz); - else - de->rx_ring[i].opts2 = cpu_to_le32(de->rx_buf_sz); - de->rx_ring[i].addr1 = cpu_to_le32(de->rx_skb[i].mapping); - de->rx_ring[i].addr2 = 0; - } - - return 0; - -err_out: - de_clean_rings(de); - return -ENOMEM; -} - -static int de_init_rings (struct de_private *de) -{ - memset(de->tx_ring, 0, sizeof(struct de_desc) * DE_TX_RING_SIZE); - de->tx_ring[DE_TX_RING_SIZE - 1].opts2 = cpu_to_le32(RingEnd); - - de->rx_tail = 0; - de->tx_head = de->tx_tail = 0; - - return de_refill_rx (de); -} - -static int de_alloc_rings (struct de_private *de) -{ - de->rx_ring = pci_alloc_consistent(de->pdev, DE_RING_BYTES, &de->ring_dma); - if (!de->rx_ring) - return -ENOMEM; - de->tx_ring = &de->rx_ring[DE_RX_RING_SIZE]; - return de_init_rings(de); -} - -static void de_clean_rings (struct de_private *de) -{ - unsigned i; - - memset(de->rx_ring, 0, sizeof(struct de_desc) * DE_RX_RING_SIZE); - de->rx_ring[DE_RX_RING_SIZE - 1].opts2 = cpu_to_le32(RingEnd); - wmb(); - memset(de->tx_ring, 0, sizeof(struct de_desc) * DE_TX_RING_SIZE); - de->tx_ring[DE_TX_RING_SIZE - 1].opts2 = cpu_to_le32(RingEnd); - wmb(); - - for (i = 0; i < DE_RX_RING_SIZE; i++) { - if (de->rx_skb[i].skb) { - pci_unmap_single(de->pdev, de->rx_skb[i].mapping, - de->rx_buf_sz, PCI_DMA_FROMDEVICE); - dev_kfree_skb(de->rx_skb[i].skb); - } - } - - for (i = 0; i < DE_TX_RING_SIZE; i++) { - struct sk_buff *skb = de->tx_skb[i].skb; - if ((skb) && (skb != DE_DUMMY_SKB)) { - if (skb != DE_SETUP_SKB) { - de->net_stats.tx_dropped++; - pci_unmap_single(de->pdev, - de->tx_skb[i].mapping, - skb->len, PCI_DMA_TODEVICE); - dev_kfree_skb(skb); - } else { - pci_unmap_single(de->pdev, - de->tx_skb[i].mapping, - sizeof(de->setup_frame), - PCI_DMA_TODEVICE); - } - } - } - - memset(&de->rx_skb, 0, sizeof(struct ring_info) * DE_RX_RING_SIZE); - memset(&de->tx_skb, 0, sizeof(struct ring_info) * DE_TX_RING_SIZE); -} - -static void de_free_rings (struct de_private *de) -{ - de_clean_rings(de); - pci_free_consistent(de->pdev, DE_RING_BYTES, de->rx_ring, de->ring_dma); - de->rx_ring = NULL; - de->tx_ring = NULL; -} - -static int de_open (struct net_device *dev) -{ - struct de_private *de = netdev_priv(dev); - int rc; - - if (netif_msg_ifup(de)) - printk(KERN_DEBUG "%s: enabling interface\n", dev->name); - - de->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); - - rc = de_alloc_rings(de); - if (rc) { - dev_err(&dev->dev, "ring allocation failure, err=%d\n", rc); - return rc; - } - - dw32(IntrMask, 0); - - rc = request_irq(dev->irq, de_interrupt, IRQF_SHARED, dev->name, dev); - if (rc) { - dev_err(&dev->dev, "IRQ %d request failure, err=%d\n", - dev->irq, rc); - goto err_out_free; - } - - rc = de_init_hw(de); - if (rc) { - dev_err(&dev->dev, "h/w init failure, err=%d\n", rc); - goto err_out_free_irq; - } - - netif_start_queue(dev); - mod_timer(&de->media_timer, jiffies + DE_TIMER_NO_LINK); - - return 0; - -err_out_free_irq: - free_irq(dev->irq, dev); -err_out_free: - de_free_rings(de); - return rc; -} - -static int de_close (struct net_device *dev) -{ - struct de_private *de = netdev_priv(dev); - unsigned long flags; - - if (netif_msg_ifdown(de)) - printk(KERN_DEBUG "%s: disabling interface\n", dev->name); - - del_timer_sync(&de->media_timer); - - spin_lock_irqsave(&de->lock, flags); - de_stop_hw(de); - netif_stop_queue(dev); - netif_carrier_off(dev); - spin_unlock_irqrestore(&de->lock, flags); - - free_irq(dev->irq, dev); - - de_free_rings(de); - de_adapter_sleep(de); - return 0; -} - -static void de_tx_timeout (struct net_device *dev) -{ - struct de_private *de = netdev_priv(dev); - - printk(KERN_DEBUG "%s: NIC status %08x mode %08x sia %08x desc %u/%u/%u\n", - dev->name, dr32(MacStatus), dr32(MacMode), dr32(SIAStatus), - de->rx_tail, de->tx_head, de->tx_tail); - - del_timer_sync(&de->media_timer); - - disable_irq(dev->irq); - spin_lock_irq(&de->lock); - - de_stop_hw(de); - netif_stop_queue(dev); - netif_carrier_off(dev); - - spin_unlock_irq(&de->lock); - enable_irq(dev->irq); - - /* Update the error counts. */ - __de_get_stats(de); - - synchronize_irq(dev->irq); - de_clean_rings(de); - - de_init_rings(de); - - de_init_hw(de); - - netif_wake_queue(dev); -} - -static void __de_get_regs(struct de_private *de, u8 *buf) -{ - int i; - u32 *rbuf = (u32 *)buf; - - /* read all CSRs */ - for (i = 0; i < DE_NUM_REGS; i++) - rbuf[i] = dr32(i * 8); - - /* handle self-clearing RxMissed counter, CSR8 */ - de_rx_missed(de, rbuf[8]); -} - -static int __de_get_settings(struct de_private *de, struct ethtool_cmd *ecmd) -{ - ecmd->supported = de->media_supported; - ecmd->transceiver = XCVR_INTERNAL; - ecmd->phy_address = 0; - ecmd->advertising = de->media_advertise; - - switch (de->media_type) { - case DE_MEDIA_AUI: - ecmd->port = PORT_AUI; - ecmd->speed = 5; - break; - case DE_MEDIA_BNC: - ecmd->port = PORT_BNC; - ecmd->speed = 2; - break; - default: - ecmd->port = PORT_TP; - ecmd->speed = SPEED_10; - break; - } - - if (dr32(MacMode) & FullDuplex) - ecmd->duplex = DUPLEX_FULL; - else - ecmd->duplex = DUPLEX_HALF; - - if (de->media_lock) - ecmd->autoneg = AUTONEG_DISABLE; - else - ecmd->autoneg = AUTONEG_ENABLE; - - /* ignore maxtxpkt, maxrxpkt for now */ - - return 0; -} - -static int __de_set_settings(struct de_private *de, struct ethtool_cmd *ecmd) -{ - u32 new_media; - unsigned int media_lock; - - if (ecmd->speed != SPEED_10 && ecmd->speed != 5 && ecmd->speed != 2) - return -EINVAL; - if (de->de21040 && ecmd->speed == 2) - return -EINVAL; - if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL) - return -EINVAL; - if (ecmd->port != PORT_TP && ecmd->port != PORT_AUI && ecmd->port != PORT_BNC) - return -EINVAL; - if (de->de21040 && ecmd->port == PORT_BNC) - return -EINVAL; - if (ecmd->transceiver != XCVR_INTERNAL) - return -EINVAL; - if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE) - return -EINVAL; - if (ecmd->advertising & ~de->media_supported) - return -EINVAL; - if (ecmd->autoneg == AUTONEG_ENABLE && - (!(ecmd->advertising & ADVERTISED_Autoneg))) - return -EINVAL; - - switch (ecmd->port) { - case PORT_AUI: - new_media = DE_MEDIA_AUI; - if (!(ecmd->advertising & ADVERTISED_AUI)) - return -EINVAL; - break; - case PORT_BNC: - new_media = DE_MEDIA_BNC; - if (!(ecmd->advertising & ADVERTISED_BNC)) - return -EINVAL; - break; - default: - if (ecmd->autoneg == AUTONEG_ENABLE) - new_media = DE_MEDIA_TP_AUTO; - else if (ecmd->duplex == DUPLEX_FULL) - new_media = DE_MEDIA_TP_FD; - else - new_media = DE_MEDIA_TP; - if (!(ecmd->advertising & ADVERTISED_TP)) - return -EINVAL; - if (!(ecmd->advertising & (ADVERTISED_10baseT_Full | ADVERTISED_10baseT_Half))) - return -EINVAL; - break; - } - - media_lock = (ecmd->autoneg == AUTONEG_ENABLE) ? 0 : 1; - - if ((new_media == de->media_type) && - (media_lock == de->media_lock) && - (ecmd->advertising == de->media_advertise)) - return 0; /* nothing to change */ - - de_link_down(de); - mod_timer(&de->media_timer, jiffies + DE_TIMER_NO_LINK); - de_stop_rxtx(de); - - de->media_type = new_media; - de->media_lock = media_lock; - de->media_advertise = ecmd->advertising; - de_set_media(de); - if (netif_running(de->dev)) - de_start_rxtx(de); - - return 0; -} - -static void de_get_drvinfo (struct net_device *dev,struct ethtool_drvinfo *info) -{ - struct de_private *de = netdev_priv(dev); - - strcpy (info->driver, DRV_NAME); - strcpy (info->version, DRV_VERSION); - strcpy (info->bus_info, pci_name(de->pdev)); - info->eedump_len = DE_EEPROM_SIZE; -} - -static int de_get_regs_len(struct net_device *dev) -{ - return DE_REGS_SIZE; -} - -static int de_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct de_private *de = netdev_priv(dev); - int rc; - - spin_lock_irq(&de->lock); - rc = __de_get_settings(de, ecmd); - spin_unlock_irq(&de->lock); - - return rc; -} - -static int de_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct de_private *de = netdev_priv(dev); - int rc; - - spin_lock_irq(&de->lock); - rc = __de_set_settings(de, ecmd); - spin_unlock_irq(&de->lock); - - return rc; -} - -static u32 de_get_msglevel(struct net_device *dev) -{ - struct de_private *de = netdev_priv(dev); - - return de->msg_enable; -} - -static void de_set_msglevel(struct net_device *dev, u32 msglvl) -{ - struct de_private *de = netdev_priv(dev); - - de->msg_enable = msglvl; -} - -static int de_get_eeprom(struct net_device *dev, - struct ethtool_eeprom *eeprom, u8 *data) -{ - struct de_private *de = netdev_priv(dev); - - if (!de->ee_data) - return -EOPNOTSUPP; - if ((eeprom->offset != 0) || (eeprom->magic != 0) || - (eeprom->len != DE_EEPROM_SIZE)) - return -EINVAL; - memcpy(data, de->ee_data, eeprom->len); - - return 0; -} - -static int de_nway_reset(struct net_device *dev) -{ - struct de_private *de = netdev_priv(dev); - u32 status; - - if (de->media_type != DE_MEDIA_TP_AUTO) - return -EINVAL; - if (netif_carrier_ok(de->dev)) - de_link_down(de); - - status = dr32(SIAStatus); - dw32(SIAStatus, (status & ~NWayState) | NWayRestart); - if (netif_msg_link(de)) - dev_info(&de->dev->dev, "link nway restart, status %x,%x\n", - status, dr32(SIAStatus)); - return 0; -} - -static void de_get_regs(struct net_device *dev, struct ethtool_regs *regs, - void *data) -{ - struct de_private *de = netdev_priv(dev); - - regs->version = (DE_REGS_VER << 2) | de->de21040; - - spin_lock_irq(&de->lock); - __de_get_regs(de, data); - spin_unlock_irq(&de->lock); -} - -static const struct ethtool_ops de_ethtool_ops = { - .get_link = ethtool_op_get_link, - .get_drvinfo = de_get_drvinfo, - .get_regs_len = de_get_regs_len, - .get_settings = de_get_settings, - .set_settings = de_set_settings, - .get_msglevel = de_get_msglevel, - .set_msglevel = de_set_msglevel, - .get_eeprom = de_get_eeprom, - .nway_reset = de_nway_reset, - .get_regs = de_get_regs, -}; - -static void __devinit de21040_get_mac_address (struct de_private *de) -{ - unsigned i; - - dw32 (ROMCmd, 0); /* Reset the pointer with a dummy write. */ - udelay(5); - - for (i = 0; i < 6; i++) { - int value, boguscnt = 100000; - do { - value = dr32(ROMCmd); - rmb(); - } while (value < 0 && --boguscnt > 0); - de->dev->dev_addr[i] = value; - udelay(1); - if (boguscnt <= 0) - pr_warning(PFX "timeout reading 21040 MAC address byte %u\n", i); - } -} - -static void __devinit de21040_get_media_info(struct de_private *de) -{ - unsigned int i; - - de->media_type = DE_MEDIA_TP; - de->media_supported |= SUPPORTED_TP | SUPPORTED_10baseT_Full | - SUPPORTED_10baseT_Half | SUPPORTED_AUI; - de->media_advertise = de->media_supported; - - for (i = 0; i < DE_MAX_MEDIA; i++) { - switch (i) { - case DE_MEDIA_AUI: - case DE_MEDIA_TP: - case DE_MEDIA_TP_FD: - de->media[i].type = i; - de->media[i].csr13 = t21040_csr13[i]; - de->media[i].csr14 = t21040_csr14[i]; - de->media[i].csr15 = t21040_csr15[i]; - break; - default: - de->media[i].type = DE_MEDIA_INVALID; - break; - } - } -} - -/* Note: this routine returns extra data bits for size detection. */ -static unsigned __devinit tulip_read_eeprom(void __iomem *regs, int location, int addr_len) -{ - int i; - unsigned retval = 0; - void __iomem *ee_addr = regs + ROMCmd; - int read_cmd = location | (EE_READ_CMD << addr_len); - - writel(EE_ENB & ~EE_CS, ee_addr); - writel(EE_ENB, ee_addr); - - /* Shift the read command bits out. */ - for (i = 4 + addr_len; i >= 0; i--) { - short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; - writel(EE_ENB | dataval, ee_addr); - readl(ee_addr); - writel(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr); - readl(ee_addr); - retval = (retval << 1) | ((readl(ee_addr) & EE_DATA_READ) ? 1 : 0); - } - writel(EE_ENB, ee_addr); - readl(ee_addr); - - for (i = 16; i > 0; i--) { - writel(EE_ENB | EE_SHIFT_CLK, ee_addr); - readl(ee_addr); - retval = (retval << 1) | ((readl(ee_addr) & EE_DATA_READ) ? 1 : 0); - writel(EE_ENB, ee_addr); - readl(ee_addr); - } - - /* Terminate the EEPROM access. */ - writel(EE_ENB & ~EE_CS, ee_addr); - return retval; -} - -static void __devinit de21041_get_srom_info (struct de_private *de) -{ - unsigned i, sa_offset = 0, ofs; - u8 ee_data[DE_EEPROM_SIZE + 6] = {}; - unsigned ee_addr_size = tulip_read_eeprom(de->regs, 0xff, 8) & 0x40000 ? 8 : 6; - struct de_srom_info_leaf *il; - void *bufp; - - /* download entire eeprom */ - for (i = 0; i < DE_EEPROM_WORDS; i++) - ((__le16 *)ee_data)[i] = - cpu_to_le16(tulip_read_eeprom(de->regs, i, ee_addr_size)); - - /* DEC now has a specification but early board makers - just put the address in the first EEPROM locations. */ - /* This does memcmp(eedata, eedata+16, 8) */ - -#ifndef CONFIG_MIPS_COBALT - - for (i = 0; i < 8; i ++) - if (ee_data[i] != ee_data[16+i]) - sa_offset = 20; - -#endif - - /* store MAC address */ - for (i = 0; i < 6; i ++) - de->dev->dev_addr[i] = ee_data[i + sa_offset]; - - /* get offset of controller 0 info leaf. ignore 2nd byte. */ - ofs = ee_data[SROMC0InfoLeaf]; - if (ofs >= (sizeof(ee_data) - sizeof(struct de_srom_info_leaf) - sizeof(struct de_srom_media_block))) - goto bad_srom; - - /* get pointer to info leaf */ - il = (struct de_srom_info_leaf *) &ee_data[ofs]; - - /* paranoia checks */ - if (il->n_blocks == 0) - goto bad_srom; - if ((sizeof(ee_data) - ofs) < - (sizeof(struct de_srom_info_leaf) + (sizeof(struct de_srom_media_block) * il->n_blocks))) - goto bad_srom; - - /* get default media type */ - switch (get_unaligned(&il->default_media)) { - case 0x0001: de->media_type = DE_MEDIA_BNC; break; - case 0x0002: de->media_type = DE_MEDIA_AUI; break; - case 0x0204: de->media_type = DE_MEDIA_TP_FD; break; - default: de->media_type = DE_MEDIA_TP_AUTO; break; - } - - if (netif_msg_probe(de)) - pr_info("de%d: SROM leaf offset %u, default media %s\n", - de->board_idx, ofs, media_name[de->media_type]); - - /* init SIA register values to defaults */ - for (i = 0; i < DE_MAX_MEDIA; i++) { - de->media[i].type = DE_MEDIA_INVALID; - de->media[i].csr13 = 0xffff; - de->media[i].csr14 = 0xffff; - de->media[i].csr15 = 0xffff; - } - - /* parse media blocks to see what medias are supported, - * and if any custom CSR values are provided - */ - bufp = ((void *)il) + sizeof(*il); - for (i = 0; i < il->n_blocks; i++) { - struct de_srom_media_block *ib = bufp; - unsigned idx; - - /* index based on media type in media block */ - switch(ib->opts & MediaBlockMask) { - case 0: /* 10baseT */ - de->media_supported |= SUPPORTED_TP | SUPPORTED_10baseT_Half - | SUPPORTED_Autoneg; - idx = DE_MEDIA_TP; - de->media[DE_MEDIA_TP_AUTO].type = DE_MEDIA_TP_AUTO; - break; - case 1: /* BNC */ - de->media_supported |= SUPPORTED_BNC; - idx = DE_MEDIA_BNC; - break; - case 2: /* AUI */ - de->media_supported |= SUPPORTED_AUI; - idx = DE_MEDIA_AUI; - break; - case 4: /* 10baseT-FD */ - de->media_supported |= SUPPORTED_TP | SUPPORTED_10baseT_Full - | SUPPORTED_Autoneg; - idx = DE_MEDIA_TP_FD; - de->media[DE_MEDIA_TP_AUTO].type = DE_MEDIA_TP_AUTO; - break; - default: - goto bad_srom; - } - - de->media[idx].type = idx; - - if (netif_msg_probe(de)) - pr_info("de%d: media block #%u: %s", - de->board_idx, i, - media_name[de->media[idx].type]); - - bufp += sizeof (ib->opts); - - if (ib->opts & MediaCustomCSRs) { - de->media[idx].csr13 = get_unaligned(&ib->csr13); - de->media[idx].csr14 = get_unaligned(&ib->csr14); - de->media[idx].csr15 = get_unaligned(&ib->csr15); - bufp += sizeof(ib->csr13) + sizeof(ib->csr14) + - sizeof(ib->csr15); - - if (netif_msg_probe(de)) - pr_cont(" (%x,%x,%x)\n", - de->media[idx].csr13, - de->media[idx].csr14, - de->media[idx].csr15); - - } else if (netif_msg_probe(de)) - pr_cont("\n"); - - if (bufp > ((void *)&ee_data[DE_EEPROM_SIZE - 3])) - break; - } - - de->media_advertise = de->media_supported; - -fill_defaults: - /* fill in defaults, for cases where custom CSRs not used */ - for (i = 0; i < DE_MAX_MEDIA; i++) { - if (de->media[i].csr13 == 0xffff) - de->media[i].csr13 = t21041_csr13[i]; - if (de->media[i].csr14 == 0xffff) { - /* autonegotiation is broken at least on some chip - revisions - rev. 0x21 works, 0x11 does not */ - if (de->pdev->revision < 0x20) - de->media[i].csr14 = t21041_csr14_brk[i]; - else - de->media[i].csr14 = t21041_csr14[i]; - } - if (de->media[i].csr15 == 0xffff) - de->media[i].csr15 = t21041_csr15[i]; - } - - de->ee_data = kmemdup(&ee_data[0], DE_EEPROM_SIZE, GFP_KERNEL); - - return; - -bad_srom: - /* for error cases, it's ok to assume we support all these */ - for (i = 0; i < DE_MAX_MEDIA; i++) - de->media[i].type = i; - de->media_supported = - SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_Autoneg | - SUPPORTED_TP | - SUPPORTED_AUI | - SUPPORTED_BNC; - goto fill_defaults; -} - -static const struct net_device_ops de_netdev_ops = { - .ndo_open = de_open, - .ndo_stop = de_close, - .ndo_set_multicast_list = de_set_rx_mode, - .ndo_start_xmit = de_start_xmit, - .ndo_get_stats = de_get_stats, - .ndo_tx_timeout = de_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __devinit de_init_one (struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct net_device *dev; - struct de_private *de; - int rc; - void __iomem *regs; - unsigned long pciaddr; - static int board_idx = -1; - - board_idx++; - -#ifndef MODULE - if (board_idx == 0) - printk("%s", version); -#endif - - /* allocate a new ethernet device structure, and fill in defaults */ - dev = alloc_etherdev(sizeof(struct de_private)); - if (!dev) - return -ENOMEM; - - dev->netdev_ops = &de_netdev_ops; - SET_NETDEV_DEV(dev, &pdev->dev); - dev->ethtool_ops = &de_ethtool_ops; - dev->watchdog_timeo = TX_TIMEOUT; - - de = netdev_priv(dev); - de->de21040 = ent->driver_data == 0 ? 1 : 0; - de->pdev = pdev; - de->dev = dev; - de->msg_enable = (debug < 0 ? DE_DEF_MSG_ENABLE : debug); - de->board_idx = board_idx; - spin_lock_init (&de->lock); - init_timer(&de->media_timer); - if (de->de21040) - de->media_timer.function = de21040_media_timer; - else - de->media_timer.function = de21041_media_timer; - de->media_timer.data = (unsigned long) de; - - netif_carrier_off(dev); - - /* wake up device, assign resources */ - rc = pci_enable_device(pdev); - if (rc) - goto err_out_free; - - /* reserve PCI resources to ensure driver atomicity */ - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) - goto err_out_disable; - - /* check for invalid IRQ value */ - if (pdev->irq < 2) { - rc = -EIO; - pr_err(PFX "invalid irq (%d) for pci dev %s\n", - pdev->irq, pci_name(pdev)); - goto err_out_res; - } - - dev->irq = pdev->irq; - - /* obtain and check validity of PCI I/O address */ - pciaddr = pci_resource_start(pdev, 1); - if (!pciaddr) { - rc = -EIO; - pr_err(PFX "no MMIO resource for pci dev %s\n", pci_name(pdev)); - goto err_out_res; - } - if (pci_resource_len(pdev, 1) < DE_REGS_SIZE) { - rc = -EIO; - pr_err(PFX "MMIO resource (%llx) too small on pci dev %s\n", - (unsigned long long)pci_resource_len(pdev, 1), - pci_name(pdev)); - goto err_out_res; - } - - /* remap CSR registers */ - regs = ioremap_nocache(pciaddr, DE_REGS_SIZE); - if (!regs) { - rc = -EIO; - pr_err(PFX "Cannot map PCI MMIO (%llx@%lx) on pci dev %s\n", - (unsigned long long)pci_resource_len(pdev, 1), - pciaddr, pci_name(pdev)); - goto err_out_res; - } - dev->base_addr = (unsigned long) regs; - de->regs = regs; - - de_adapter_wake(de); - - /* make sure hardware is not running */ - rc = de_reset_mac(de); - if (rc) { - pr_err(PFX "Cannot reset MAC, pci dev %s\n", pci_name(pdev)); - goto err_out_iomap; - } - - /* get MAC address, initialize default media type and - * get list of supported media - */ - if (de->de21040) { - de21040_get_mac_address(de); - de21040_get_media_info(de); - } else { - de21041_get_srom_info(de); - } - - /* register new network interface with kernel */ - rc = register_netdev(dev); - if (rc) - goto err_out_iomap; - - /* print info about board and interface just registered */ - dev_info(&dev->dev, "%s at 0x%lx, %pM, IRQ %d\n", - de->de21040 ? "21040" : "21041", - dev->base_addr, - dev->dev_addr, - dev->irq); - - pci_set_drvdata(pdev, dev); - - /* enable busmastering */ - pci_set_master(pdev); - - /* put adapter to sleep */ - de_adapter_sleep(de); - - return 0; - -err_out_iomap: - kfree(de->ee_data); - iounmap(regs); -err_out_res: - pci_release_regions(pdev); -err_out_disable: - pci_disable_device(pdev); -err_out_free: - free_netdev(dev); - return rc; -} - -static void __devexit de_remove_one (struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct de_private *de = netdev_priv(dev); - - BUG_ON(!dev); - unregister_netdev(dev); - kfree(de->ee_data); - iounmap(de->regs); - pci_release_regions(pdev); - pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); - free_netdev(dev); -} - -#ifdef CONFIG_PM - -static int de_suspend (struct pci_dev *pdev, pm_message_t state) -{ - struct net_device *dev = pci_get_drvdata (pdev); - struct de_private *de = netdev_priv(dev); - - rtnl_lock(); - if (netif_running (dev)) { - del_timer_sync(&de->media_timer); - - disable_irq(dev->irq); - spin_lock_irq(&de->lock); - - de_stop_hw(de); - netif_stop_queue(dev); - netif_device_detach(dev); - netif_carrier_off(dev); - - spin_unlock_irq(&de->lock); - enable_irq(dev->irq); - - /* Update the error counts. */ - __de_get_stats(de); - - synchronize_irq(dev->irq); - de_clean_rings(de); - - de_adapter_sleep(de); - pci_disable_device(pdev); - } else { - netif_device_detach(dev); - } - rtnl_unlock(); - return 0; -} - -static int de_resume (struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata (pdev); - struct de_private *de = netdev_priv(dev); - int retval = 0; - - rtnl_lock(); - if (netif_device_present(dev)) - goto out; - if (!netif_running(dev)) - goto out_attach; - if ((retval = pci_enable_device(pdev))) { - dev_err(&dev->dev, "pci_enable_device failed in resume\n"); - goto out; - } - pci_set_master(pdev); - de_init_rings(de); - de_init_hw(de); -out_attach: - netif_device_attach(dev); -out: - rtnl_unlock(); - return 0; -} - -#endif /* CONFIG_PM */ - -static struct pci_driver de_driver = { - .name = DRV_NAME, - .id_table = de_pci_tbl, - .probe = de_init_one, - .remove = __devexit_p(de_remove_one), -#ifdef CONFIG_PM - .suspend = de_suspend, - .resume = de_resume, -#endif -}; - -static int __init de_init (void) -{ -#ifdef MODULE - printk("%s", version); -#endif - return pci_register_driver(&de_driver); -} - -static void __exit de_exit (void) -{ - pci_unregister_driver (&de_driver); -} - -module_init(de_init); -module_exit(de_exit); diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c deleted file mode 100644 index 4dbd493b996..00000000000 --- a/drivers/net/tulip/de4x5.c +++ /dev/null @@ -1,5603 +0,0 @@ -/* de4x5.c: A DIGITAL DC21x4x DECchip and DE425/DE434/DE435/DE450/DE500 - ethernet driver for Linux. - - Copyright 1994, 1995 Digital Equipment Corporation. - - Testing resources for this driver have been made available - in part by NASA Ames Research Center (mjacob@nas.nasa.gov). - - The author may be reached at davies@maniac.ultranet.com. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the - Free Software Foundation; either version 2 of the License, or (at your - option) any later version. - - THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 675 Mass Ave, Cambridge, MA 02139, USA. - - Originally, this driver was written for the Digital Equipment - Corporation series of EtherWORKS ethernet cards: - - DE425 TP/COAX EISA - DE434 TP PCI - DE435 TP/COAX/AUI PCI - DE450 TP/COAX/AUI PCI - DE500 10/100 PCI Fasternet - - but it will now attempt to support all cards which conform to the - Digital Semiconductor SROM Specification. The driver currently - recognises the following chips: - - DC21040 (no SROM) - DC21041[A] - DC21140[A] - DC21142 - DC21143 - - So far the driver is known to work with the following cards: - - KINGSTON - Linksys - ZNYX342 - SMC8432 - SMC9332 (w/new SROM) - ZNYX31[45] - ZNYX346 10/100 4 port (can act as a 10/100 bridge!) - - The driver has been tested on a relatively busy network using the DE425, - DE434, DE435 and DE500 cards and benchmarked with 'ttcp': it transferred - 16M of data to a DECstation 5000/200 as follows: - - TCP UDP - TX RX TX RX - DE425 1030k 997k 1170k 1128k - DE434 1063k 995k 1170k 1125k - DE435 1063k 995k 1170k 1125k - DE500 1063k 998k 1170k 1125k in 10Mb/s mode - - All values are typical (in kBytes/sec) from a sample of 4 for each - measurement. Their error is +/-20k on a quiet (private) network and also - depend on what load the CPU has. - - ========================================================================= - This driver has been written substantially from scratch, although its - inheritance of style and stack interface from 'ewrk3.c' and in turn from - Donald Becker's 'lance.c' should be obvious. With the module autoload of - every usable DECchip board, I pinched Donald's 'next_module' field to - link my modules together. - - Upto 15 EISA cards can be supported under this driver, limited primarily - by the available IRQ lines. I have checked different configurations of - multiple depca, EtherWORKS 3 cards and de4x5 cards and have not found a - problem yet (provided you have at least depca.c v0.38) ... - - PCI support has been added to allow the driver to work with the DE434, - DE435, DE450 and DE500 cards. The I/O accesses are a bit of a kludge due - to the differences in the EISA and PCI CSR address offsets from the base - address. - - The ability to load this driver as a loadable module has been included - and used extensively during the driver development (to save those long - reboot sequences). Loadable module support under PCI and EISA has been - achieved by letting the driver autoprobe as if it were compiled into the - kernel. Do make sure you're not sharing interrupts with anything that - cannot accommodate interrupt sharing! - - To utilise this ability, you have to do 8 things: - - 0) have a copy of the loadable modules code installed on your system. - 1) copy de4x5.c from the /linux/drivers/net directory to your favourite - temporary directory. - 2) for fixed autoprobes (not recommended), edit the source code near - line 5594 to reflect the I/O address you're using, or assign these when - loading by: - - insmod de4x5 io=0xghh where g = bus number - hh = device number - - NB: autoprobing for modules is now supported by default. You may just - use: - - insmod de4x5 - - to load all available boards. For a specific board, still use - the 'io=?' above. - 3) compile de4x5.c, but include -DMODULE in the command line to ensure - that the correct bits are compiled (see end of source code). - 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a - kernel with the de4x5 configuration turned off and reboot. - 5) insmod de4x5 [io=0xghh] - 6) run the net startup bits for your new eth?? interface(s) manually - (usually /etc/rc.inet[12] at boot time). - 7) enjoy! - - To unload a module, turn off the associated interface(s) - 'ifconfig eth?? down' then 'rmmod de4x5'. - - Automedia detection is included so that in principal you can disconnect - from, e.g. TP, reconnect to BNC and things will still work (after a - pause whilst the driver figures out where its media went). My tests - using ping showed that it appears to work.... - - By default, the driver will now autodetect any DECchip based card. - Should you have a need to restrict the driver to DIGITAL only cards, you - can compile with a DEC_ONLY define, or if loading as a module, use the - 'dec_only=1' parameter. - - I've changed the timing routines to use the kernel timer and scheduling - functions so that the hangs and other assorted problems that occurred - while autosensing the media should be gone. A bonus for the DC21040 - auto media sense algorithm is that it can now use one that is more in - line with the rest (the DC21040 chip doesn't have a hardware timer). - The downside is the 1 'jiffies' (10ms) resolution. - - IEEE 802.3u MII interface code has been added in anticipation that some - products may use it in the future. - - The SMC9332 card has a non-compliant SROM which needs fixing - I have - patched this driver to detect it because the SROM format used complies - to a previous DEC-STD format. - - I have removed the buffer copies needed for receive on Intels. I cannot - remove them for Alphas since the Tulip hardware only does longword - aligned DMA transfers and the Alphas get alignment traps with non - longword aligned data copies (which makes them really slow). No comment. - - I have added SROM decoding routines to make this driver work with any - card that supports the Digital Semiconductor SROM spec. This will help - all cards running the dc2114x series chips in particular. Cards using - the dc2104x chips should run correctly with the basic driver. I'm in - debt to <mjacob@feral.com> for the testing and feedback that helped get - this feature working. So far we have tested KINGSTON, SMC8432, SMC9332 - (with the latest SROM complying with the SROM spec V3: their first was - broken), ZNYX342 and LinkSys. ZYNX314 (dual 21041 MAC) and ZNYX 315 - (quad 21041 MAC) cards also appear to work despite their incorrectly - wired IRQs. - - I have added a temporary fix for interrupt problems when some SCSI cards - share the same interrupt as the DECchip based cards. The problem occurs - because the SCSI card wants to grab the interrupt as a fast interrupt - (runs the service routine with interrupts turned off) vs. this card - which really needs to run the service routine with interrupts turned on. - This driver will now add the interrupt service routine as a fast - interrupt if it is bounced from the slow interrupt. THIS IS NOT A - RECOMMENDED WAY TO RUN THE DRIVER and has been done for a limited time - until people sort out their compatibility issues and the kernel - interrupt service code is fixed. YOU SHOULD SEPARATE OUT THE FAST - INTERRUPT CARDS FROM THE SLOW INTERRUPT CARDS to ensure that they do not - run on the same interrupt. PCMCIA/CardBus is another can of worms... - - Finally, I think I have really fixed the module loading problem with - more than one DECchip based card. As a side effect, I don't mess with - the device structure any more which means that if more than 1 card in - 2.0.x is installed (4 in 2.1.x), the user will have to edit - linux/drivers/net/Space.c to make room for them. Hence, module loading - is the preferred way to use this driver, since it doesn't have this - limitation. - - Where SROM media detection is used and full duplex is specified in the - SROM, the feature is ignored unless lp->params.fdx is set at compile - time OR during a module load (insmod de4x5 args='eth??:fdx' [see - below]). This is because there is no way to automatically detect full - duplex links except through autonegotiation. When I include the - autonegotiation feature in the SROM autoconf code, this detection will - occur automatically for that case. - - Command line arguments are now allowed, similar to passing arguments - through LILO. This will allow a per adapter board set up of full duplex - and media. The only lexical constraints are: the board name (dev->name) - appears in the list before its parameters. The list of parameters ends - either at the end of the parameter list or with another board name. The - following parameters are allowed: - - fdx for full duplex - autosense to set the media/speed; with the following - sub-parameters: - TP, TP_NW, BNC, AUI, BNC_AUI, 100Mb, 10Mb, AUTO - - Case sensitivity is important for the sub-parameters. They *must* be - upper case. Examples: - - insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'. - - For a compiled in driver, at or above line 548, place e.g. - #define DE4X5_PARM "eth0:fdx autosense=AUI eth2:autosense=TP" - - Yes, I know full duplex isn't permissible on BNC or AUI; they're just - examples. By default, full duplex is turned off and AUTO is the default - autosense setting. In reality, I expect only the full duplex option to - be used. Note the use of single quotes in the two examples above and the - lack of commas to separate items. ALSO, you must get the requested media - correct in relation to what the adapter SROM says it has. There's no way - to determine this in advance other than by trial and error and common - sense, e.g. call a BNC connectored port 'BNC', not '10Mb'. - - Changed the bus probing. EISA used to be done first, followed by PCI. - Most people probably don't even know what a de425 is today and the EISA - probe has messed up some SCSI cards in the past, so now PCI is always - probed first followed by EISA if a) the architecture allows EISA and - either b) there have been no PCI cards detected or c) an EISA probe is - forced by the user. To force a probe include "force_eisa" in your - insmod "args" line; for built-in kernels either change the driver to do - this automatically or include #define DE4X5_FORCE_EISA on or before - line 1040 in the driver. - - TO DO: - ------ - - Revision History - ---------------- - - Version Date Description - - 0.1 17-Nov-94 Initial writing. ALPHA code release. - 0.2 13-Jan-95 Added PCI support for DE435's. - 0.21 19-Jan-95 Added auto media detection. - 0.22 10-Feb-95 Fix interrupt handler call <chris@cosy.sbg.ac.at>. - Fix recognition bug reported by <bkm@star.rl.ac.uk>. - Add request/release_region code. - Add loadable modules support for PCI. - Clean up loadable modules support. - 0.23 28-Feb-95 Added DC21041 and DC21140 support. - Fix missed frame counter value and initialisation. - Fixed EISA probe. - 0.24 11-Apr-95 Change delay routine to use <linux/udelay>. - Change TX_BUFFS_AVAIL macro. - Change media autodetection to allow manual setting. - Completed DE500 (DC21140) support. - 0.241 18-Apr-95 Interim release without DE500 Autosense Algorithm. - 0.242 10-May-95 Minor changes. - 0.30 12-Jun-95 Timer fix for DC21140. - Portability changes. - Add ALPHA changes from <jestabro@ant.tay1.dec.com>. - Add DE500 semi automatic autosense. - Add Link Fail interrupt TP failure detection. - Add timer based link change detection. - Plugged a memory leak in de4x5_queue_pkt(). - 0.31 13-Jun-95 Fixed PCI stuff for 1.3.1. - 0.32 26-Jun-95 Added verify_area() calls in de4x5_ioctl() from a - suggestion by <heiko@colossus.escape.de>. - 0.33 8-Aug-95 Add shared interrupt support (not released yet). - 0.331 21-Aug-95 Fix de4x5_open() with fast CPUs. - Fix de4x5_interrupt(). - Fix dc21140_autoconf() mess. - No shared interrupt support. - 0.332 11-Sep-95 Added MII management interface routines. - 0.40 5-Mar-96 Fix setup frame timeout <maartenb@hpkuipc.cern.ch>. - Add kernel timer code (h/w is too flaky). - Add MII based PHY autosense. - Add new multicasting code. - Add new autosense algorithms for media/mode - selection using kernel scheduling/timing. - Re-formatted. - Made changes suggested by <jeff@router.patch.net>: - Change driver to detect all DECchip based cards - with DEC_ONLY restriction a special case. - Changed driver to autoprobe as a module. No irq - checking is done now - assume BIOS is good! - Added SMC9332 detection <manabe@Roy.dsl.tutics.ac.jp> - 0.41 21-Mar-96 Don't check for get_hw_addr checksum unless DEC card - only <niles@axp745gsfc.nasa.gov> - Fix for multiple PCI cards reported by <jos@xos.nl> - Duh, put the IRQF_SHARED flag into request_interrupt(). - Fix SMC ethernet address in enet_det[]. - Print chip name instead of "UNKNOWN" during boot. - 0.42 26-Apr-96 Fix MII write TA bit error. - Fix bug in dc21040 and dc21041 autosense code. - Remove buffer copies on receive for Intels. - Change sk_buff handling during media disconnects to - eliminate DUP packets. - Add dynamic TX thresholding. - Change all chips to use perfect multicast filtering. - Fix alloc_device() bug <jari@markkus2.fimr.fi> - 0.43 21-Jun-96 Fix unconnected media TX retry bug. - Add Accton to the list of broken cards. - Fix TX under-run bug for non DC21140 chips. - Fix boot command probe bug in alloc_device() as - reported by <koen.gadeyne@barco.com> and - <orava@nether.tky.hut.fi>. - Add cache locks to prevent a race condition as - reported by <csd@microplex.com> and - <baba@beckman.uiuc.edu>. - Upgraded alloc_device() code. - 0.431 28-Jun-96 Fix potential bug in queue_pkt() from discussion - with <csd@microplex.com> - 0.44 13-Aug-96 Fix RX overflow bug in 2114[023] chips. - Fix EISA probe bugs reported by <os2@kpi.kharkov.ua> - and <michael@compurex.com>. - 0.441 9-Sep-96 Change dc21041_autoconf() to probe quiet BNC media - with a loopback packet. - 0.442 9-Sep-96 Include AUI in dc21041 media printout. Bug reported - by <bhat@mundook.cs.mu.OZ.AU> - 0.45 8-Dec-96 Include endian functions for PPC use, from work - by <cort@cs.nmt.edu> and <g.thomas@opengroup.org>. - 0.451 28-Dec-96 Added fix to allow autoprobe for modules after - suggestion from <mjacob@feral.com>. - 0.5 30-Jan-97 Added SROM decoding functions. - Updated debug flags. - Fix sleep/wakeup calls for PCI cards, bug reported - by <cross@gweep.lkg.dec.com>. - Added multi-MAC, one SROM feature from discussion - with <mjacob@feral.com>. - Added full module autoprobe capability. - Added attempt to use an SMC9332 with broken SROM. - Added fix for ZYNX multi-mac cards that didn't - get their IRQs wired correctly. - 0.51 13-Feb-97 Added endian fixes for the SROM accesses from - <paubert@iram.es> - Fix init_connection() to remove extra device reset. - Fix MAC/PHY reset ordering in dc21140m_autoconf(). - Fix initialisation problem with lp->timeout in - typeX_infoblock() from <paubert@iram.es>. - Fix MII PHY reset problem from work done by - <paubert@iram.es>. - 0.52 26-Apr-97 Some changes may not credit the right people - - a disk crash meant I lost some mail. - Change RX interrupt routine to drop rather than - defer packets to avoid hang reported by - <g.thomas@opengroup.org>. - Fix srom_exec() to return for COMPACT and type 1 - infoblocks. - Added DC21142 and DC21143 functions. - Added byte counters from <phil@tazenda.demon.co.uk> - Added IRQF_DISABLED temporary fix from - <mjacob@feral.com>. - 0.53 12-Nov-97 Fix the *_probe() to include 'eth??' name during - module load: bug reported by - <Piete.Brooks@cl.cam.ac.uk> - Fix multi-MAC, one SROM, to work with 2114x chips: - bug reported by <cmetz@inner.net>. - Make above search independent of BIOS device scan - direction. - Completed DC2114[23] autosense functions. - 0.531 21-Dec-97 Fix DE500-XA 100Mb/s bug reported by - <robin@intercore.com - Fix type1_infoblock() bug introduced in 0.53, from - problem reports by - <parmee@postecss.ncrfran.france.ncr.com> and - <jo@ice.dillingen.baynet.de>. - Added argument list to set up each board from either - a module's command line or a compiled in #define. - Added generic MII PHY functionality to deal with - newer PHY chips. - Fix the mess in 2.1.67. - 0.532 5-Jan-98 Fix bug in mii_get_phy() reported by - <redhat@cococo.net>. - Fix bug in pci_probe() for 64 bit systems reported - by <belliott@accessone.com>. - 0.533 9-Jan-98 Fix more 64 bit bugs reported by <jal@cs.brown.edu>. - 0.534 24-Jan-98 Fix last (?) endian bug from <geert@linux-m68k.org> - 0.535 21-Feb-98 Fix Ethernet Address PROM reset bug for DC21040. - 0.536 21-Mar-98 Change pci_probe() to use the pci_dev structure. - **Incompatible with 2.0.x from here.** - 0.540 5-Jul-98 Atomicize assertion of dev->interrupt for SMP - from <lma@varesearch.com> - Add TP, AUI and BNC cases to 21140m_autoconf() for - case where a 21140 under SROM control uses, e.g. AUI - from problem report by <delchini@lpnp09.in2p3.fr> - Add MII parallel detection to 2114x_autoconf() for - case where no autonegotiation partner exists from - problem report by <mlapsley@ndirect.co.uk>. - Add ability to force connection type directly even - when using SROM control from problem report by - <earl@exis.net>. - Updated the PCI interface to conform with the latest - version. I hope nothing is broken... - Add TX done interrupt modification from suggestion - by <Austin.Donnelly@cl.cam.ac.uk>. - Fix is_anc_capable() bug reported by - <Austin.Donnelly@cl.cam.ac.uk>. - Fix type[13]_infoblock() bug: during MII search, PHY - lp->rst not run because lp->ibn not initialised - - from report & fix by <paubert@iram.es>. - Fix probe bug with EISA & PCI cards present from - report by <eirik@netcom.com>. - 0.541 24-Aug-98 Fix compiler problems associated with i386-string - ops from multiple bug reports and temporary fix - from <paubert@iram.es>. - Fix pci_probe() to correctly emulate the old - pcibios_find_class() function. - Add an_exception() for old ZYNX346 and fix compile - warning on PPC & SPARC, from <ecd@skynet.be>. - Fix lastPCI to correctly work with compiled in - kernels and modules from bug report by - <Zlatko.Calusic@CARNet.hr> et al. - 0.542 15-Sep-98 Fix dc2114x_autoconf() to stop multiple messages - when media is unconnected. - Change dev->interrupt to lp->interrupt to ensure - alignment for Alpha's and avoid their unaligned - access traps. This flag is merely for log messages: - should do something more definitive though... - 0.543 30-Dec-98 Add SMP spin locking. - 0.544 8-May-99 Fix for buggy SROM in Motorola embedded boards using - a 21143 by <mmporter@home.com>. - Change PCI/EISA bus probing order. - 0.545 28-Nov-99 Further Moto SROM bug fix from - <mporter@eng.mcd.mot.com> - Remove double checking for DEBUG_RX in de4x5_dbg_rx() - from report by <geert@linux-m68k.org> - 0.546 22-Feb-01 Fixes Alpha XP1000 oops. The srom_search function - was causing a page fault when initializing the - variable 'pb', on a non de4x5 PCI device, in this - case a PCI bridge (DEC chip 21152). The value of - 'pb' is now only initialized if a de4x5 chip is - present. - <france@handhelds.org> - 0.547 08-Nov-01 Use library crc32 functions by <Matt_Domsch@dell.com> - 0.548 30-Aug-03 Big 2.6 cleanup. Ported to PCI/EISA probing and - generic DMA APIs. Fixed DE425 support on Alpha. - <maz@wild-wind.fr.eu.org> - ========================================================================= -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/interrupt.h> -#include <linux/ptrace.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/pci.h> -#include <linux/eisa.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/crc32.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/time.h> -#include <linux/types.h> -#include <linux/unistd.h> -#include <linux/ctype.h> -#include <linux/dma-mapping.h> -#include <linux/moduleparam.h> -#include <linux/bitops.h> -#include <linux/gfp.h> - -#include <asm/io.h> -#include <asm/dma.h> -#include <asm/byteorder.h> -#include <asm/unaligned.h> -#include <asm/uaccess.h> -#ifdef CONFIG_PPC_PMAC -#include <asm/machdep.h> -#endif /* CONFIG_PPC_PMAC */ - -#include "de4x5.h" - -static const char version[] __devinitconst = - KERN_INFO "de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com\n"; - -#define c_char const char - -/* -** MII Information -*/ -struct phy_table { - int reset; /* Hard reset required? */ - int id; /* IEEE OUI */ - int ta; /* One cycle TA time - 802.3u is confusing here */ - struct { /* Non autonegotiation (parallel) speed det. */ - int reg; - int mask; - int value; - } spd; -}; - -struct mii_phy { - int reset; /* Hard reset required? */ - int id; /* IEEE OUI */ - int ta; /* One cycle TA time */ - struct { /* Non autonegotiation (parallel) speed det. */ - int reg; - int mask; - int value; - } spd; - int addr; /* MII address for the PHY */ - u_char *gep; /* Start of GEP sequence block in SROM */ - u_char *rst; /* Start of reset sequence in SROM */ - u_int mc; /* Media Capabilities */ - u_int ana; /* NWay Advertisement */ - u_int fdx; /* Full DupleX capabilities for each media */ - u_int ttm; /* Transmit Threshold Mode for each media */ - u_int mci; /* 21142 MII Connector Interrupt info */ -}; - -#define DE4X5_MAX_PHY 8 /* Allow upto 8 attached PHY devices per board */ - -struct sia_phy { - u_char mc; /* Media Code */ - u_char ext; /* csr13-15 valid when set */ - int csr13; /* SIA Connectivity Register */ - int csr14; /* SIA TX/RX Register */ - int csr15; /* SIA General Register */ - int gepc; /* SIA GEP Control Information */ - int gep; /* SIA GEP Data */ -}; - -/* -** Define the know universe of PHY devices that can be -** recognised by this driver. -*/ -static struct phy_table phy_info[] = { - {0, NATIONAL_TX, 1, {0x19, 0x40, 0x00}}, /* National TX */ - {1, BROADCOM_T4, 1, {0x10, 0x02, 0x02}}, /* Broadcom T4 */ - {0, SEEQ_T4 , 1, {0x12, 0x10, 0x10}}, /* SEEQ T4 */ - {0, CYPRESS_T4 , 1, {0x05, 0x20, 0x20}}, /* Cypress T4 */ - {0, 0x7810 , 1, {0x14, 0x0800, 0x0800}} /* Level One LTX970 */ -}; - -/* -** These GENERIC values assumes that the PHY devices follow 802.3u and -** allow parallel detection to set the link partner ability register. -** Detection of 100Base-TX [H/F Duplex] and 100Base-T4 is supported. -*/ -#define GENERIC_REG 0x05 /* Autoneg. Link Partner Advertisement Reg. */ -#define GENERIC_MASK MII_ANLPA_100M /* All 100Mb/s Technologies */ -#define GENERIC_VALUE MII_ANLPA_100M /* 100B-TX, 100B-TX FDX, 100B-T4 */ - -/* -** Define special SROM detection cases -*/ -static c_char enet_det[][ETH_ALEN] = { - {0x00, 0x00, 0xc0, 0x00, 0x00, 0x00}, - {0x00, 0x00, 0xe8, 0x00, 0x00, 0x00} -}; - -#define SMC 1 -#define ACCTON 2 - -/* -** SROM Repair definitions. If a broken SROM is detected a card may -** use this information to help figure out what to do. This is a -** "stab in the dark" and so far for SMC9332's only. -*/ -static c_char srom_repair_info[][100] = { - {0x00,0x1e,0x00,0x00,0x00,0x08, /* SMC9332 */ - 0x1f,0x01,0x8f,0x01,0x00,0x01,0x00,0x02, - 0x01,0x00,0x00,0x78,0xe0,0x01,0x00,0x50, - 0x00,0x18,} -}; - - -#ifdef DE4X5_DEBUG -static int de4x5_debug = DE4X5_DEBUG; -#else -/*static int de4x5_debug = (DEBUG_MII | DEBUG_SROM | DEBUG_PCICFG | DEBUG_MEDIA | DEBUG_VERSION);*/ -static int de4x5_debug = (DEBUG_MEDIA | DEBUG_VERSION); -#endif - -/* -** Allow per adapter set up. For modules this is simply a command line -** parameter, e.g.: -** insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'. -** -** For a compiled in driver, place e.g. -** #define DE4X5_PARM "eth0:fdx autosense=AUI eth2:autosense=TP" -** here -*/ -#ifdef DE4X5_PARM -static char *args = DE4X5_PARM; -#else -static char *args; -#endif - -struct parameters { - bool fdx; - int autosense; -}; - -#define DE4X5_AUTOSENSE_MS 250 /* msec autosense tick (DE500) */ - -#define DE4X5_NDA 0xffe0 /* No Device (I/O) Address */ - -/* -** Ethernet PROM defines -*/ -#define PROBE_LENGTH 32 -#define ETH_PROM_SIG 0xAA5500FFUL - -/* -** Ethernet Info -*/ -#define PKT_BUF_SZ 1536 /* Buffer size for each Tx/Rx buffer */ -#define IEEE802_3_SZ 1518 /* Packet + CRC */ -#define MAX_PKT_SZ 1514 /* Maximum ethernet packet length */ -#define MAX_DAT_SZ 1500 /* Maximum ethernet data length */ -#define MIN_DAT_SZ 1 /* Minimum ethernet data length */ -#define PKT_HDR_LEN 14 /* Addresses and data length info */ -#define FAKE_FRAME_LEN (MAX_PKT_SZ + 1) -#define QUEUE_PKT_TIMEOUT (3*HZ) /* 3 second timeout */ - - -/* -** EISA bus defines -*/ -#define DE4X5_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */ -#define DE4X5_EISA_TOTAL_SIZE 0x100 /* I/O address extent */ - -#define EISA_ALLOWED_IRQ_LIST {5, 9, 10, 11} - -#define DE4X5_SIGNATURE {"DE425","DE434","DE435","DE450","DE500"} -#define DE4X5_NAME_LENGTH 8 - -static c_char *de4x5_signatures[] = DE4X5_SIGNATURE; - -/* -** Ethernet PROM defines for DC21040 -*/ -#define PROBE_LENGTH 32 -#define ETH_PROM_SIG 0xAA5500FFUL - -/* -** PCI Bus defines -*/ -#define PCI_MAX_BUS_NUM 8 -#define DE4X5_PCI_TOTAL_SIZE 0x80 /* I/O address extent */ -#define DE4X5_CLASS_CODE 0x00020000 /* Network controller, Ethernet */ - -/* -** Memory Alignment. Each descriptor is 4 longwords long. To force a -** particular alignment on the TX descriptor, adjust DESC_SKIP_LEN and -** DESC_ALIGN. ALIGN aligns the start address of the private memory area -** and hence the RX descriptor ring's first entry. -*/ -#define DE4X5_ALIGN4 ((u_long)4 - 1) /* 1 longword align */ -#define DE4X5_ALIGN8 ((u_long)8 - 1) /* 2 longword align */ -#define DE4X5_ALIGN16 ((u_long)16 - 1) /* 4 longword align */ -#define DE4X5_ALIGN32 ((u_long)32 - 1) /* 8 longword align */ -#define DE4X5_ALIGN64 ((u_long)64 - 1) /* 16 longword align */ -#define DE4X5_ALIGN128 ((u_long)128 - 1) /* 32 longword align */ - -#define DE4X5_ALIGN DE4X5_ALIGN32 /* Keep the DC21040 happy... */ -#define DE4X5_CACHE_ALIGN CAL_16LONG -#define DESC_SKIP_LEN DSL_0 /* Must agree with DESC_ALIGN */ -/*#define DESC_ALIGN u32 dummy[4]; / * Must agree with DESC_SKIP_LEN */ -#define DESC_ALIGN - -#ifndef DEC_ONLY /* See README.de4x5 for using this */ -static int dec_only; -#else -static int dec_only = 1; -#endif - -/* -** DE4X5 IRQ ENABLE/DISABLE -*/ -#define ENABLE_IRQs { \ - imr |= lp->irq_en;\ - outl(imr, DE4X5_IMR); /* Enable the IRQs */\ -} - -#define DISABLE_IRQs {\ - imr = inl(DE4X5_IMR);\ - imr &= ~lp->irq_en;\ - outl(imr, DE4X5_IMR); /* Disable the IRQs */\ -} - -#define UNMASK_IRQs {\ - imr |= lp->irq_mask;\ - outl(imr, DE4X5_IMR); /* Unmask the IRQs */\ -} - -#define MASK_IRQs {\ - imr = inl(DE4X5_IMR);\ - imr &= ~lp->irq_mask;\ - outl(imr, DE4X5_IMR); /* Mask the IRQs */\ -} - -/* -** DE4X5 START/STOP -*/ -#define START_DE4X5 {\ - omr = inl(DE4X5_OMR);\ - omr |= OMR_ST | OMR_SR;\ - outl(omr, DE4X5_OMR); /* Enable the TX and/or RX */\ -} - -#define STOP_DE4X5 {\ - omr = inl(DE4X5_OMR);\ - omr &= ~(OMR_ST|OMR_SR);\ - outl(omr, DE4X5_OMR); /* Disable the TX and/or RX */ \ -} - -/* -** DE4X5 SIA RESET -*/ -#define RESET_SIA outl(0, DE4X5_SICR); /* Reset SIA connectivity regs */ - -/* -** DE500 AUTOSENSE TIMER INTERVAL (MILLISECS) -*/ -#define DE4X5_AUTOSENSE_MS 250 - -/* -** SROM Structure -*/ -struct de4x5_srom { - char sub_vendor_id[2]; - char sub_system_id[2]; - char reserved[12]; - char id_block_crc; - char reserved2; - char version; - char num_controllers; - char ieee_addr[6]; - char info[100]; - short chksum; -}; -#define SUB_VENDOR_ID 0x500a - -/* -** DE4X5 Descriptors. Make sure that all the RX buffers are contiguous -** and have sizes of both a power of 2 and a multiple of 4. -** A size of 256 bytes for each buffer could be chosen because over 90% of -** all packets in our network are <256 bytes long and 64 longword alignment -** is possible. 1536 showed better 'ttcp' performance. Take your pick. 32 TX -** descriptors are needed for machines with an ALPHA CPU. -*/ -#define NUM_RX_DESC 8 /* Number of RX descriptors */ -#define NUM_TX_DESC 32 /* Number of TX descriptors */ -#define RX_BUFF_SZ 1536 /* Power of 2 for kmalloc and */ - /* Multiple of 4 for DC21040 */ - /* Allows 512 byte alignment */ -struct de4x5_desc { - volatile __le32 status; - __le32 des1; - __le32 buf; - __le32 next; - DESC_ALIGN -}; - -/* -** The DE4X5 private structure -*/ -#define DE4X5_PKT_STAT_SZ 16 -#define DE4X5_PKT_BIN_SZ 128 /* Should be >=100 unless you - increase DE4X5_PKT_STAT_SZ */ - -struct pkt_stats { - u_int bins[DE4X5_PKT_STAT_SZ]; /* Private stats counters */ - u_int unicast; - u_int multicast; - u_int broadcast; - u_int excessive_collisions; - u_int tx_underruns; - u_int excessive_underruns; - u_int rx_runt_frames; - u_int rx_collision; - u_int rx_dribble; - u_int rx_overflow; -}; - -struct de4x5_private { - char adapter_name[80]; /* Adapter name */ - u_long interrupt; /* Aligned ISR flag */ - struct de4x5_desc *rx_ring; /* RX descriptor ring */ - struct de4x5_desc *tx_ring; /* TX descriptor ring */ - struct sk_buff *tx_skb[NUM_TX_DESC]; /* TX skb for freeing when sent */ - struct sk_buff *rx_skb[NUM_RX_DESC]; /* RX skb's */ - int rx_new, rx_old; /* RX descriptor ring pointers */ - int tx_new, tx_old; /* TX descriptor ring pointers */ - char setup_frame[SETUP_FRAME_LEN]; /* Holds MCA and PA info. */ - char frame[64]; /* Min sized packet for loopback*/ - spinlock_t lock; /* Adapter specific spinlock */ - struct net_device_stats stats; /* Public stats */ - struct pkt_stats pktStats; /* Private stats counters */ - char rxRingSize; - char txRingSize; - int bus; /* EISA or PCI */ - int bus_num; /* PCI Bus number */ - int device; /* Device number on PCI bus */ - int state; /* Adapter OPENED or CLOSED */ - int chipset; /* DC21040, DC21041 or DC21140 */ - s32 irq_mask; /* Interrupt Mask (Enable) bits */ - s32 irq_en; /* Summary interrupt bits */ - int media; /* Media (eg TP), mode (eg 100B)*/ - int c_media; /* Remember the last media conn */ - bool fdx; /* media full duplex flag */ - int linkOK; /* Link is OK */ - int autosense; /* Allow/disallow autosensing */ - bool tx_enable; /* Enable descriptor polling */ - int setup_f; /* Setup frame filtering type */ - int local_state; /* State within a 'media' state */ - struct mii_phy phy[DE4X5_MAX_PHY]; /* List of attached PHY devices */ - struct sia_phy sia; /* SIA PHY Information */ - int active; /* Index to active PHY device */ - int mii_cnt; /* Number of attached PHY's */ - int timeout; /* Scheduling counter */ - struct timer_list timer; /* Timer info for kernel */ - int tmp; /* Temporary global per card */ - struct { - u_long lock; /* Lock the cache accesses */ - s32 csr0; /* Saved Bus Mode Register */ - s32 csr6; /* Saved Operating Mode Reg. */ - s32 csr7; /* Saved IRQ Mask Register */ - s32 gep; /* Saved General Purpose Reg. */ - s32 gepc; /* Control info for GEP */ - s32 csr13; /* Saved SIA Connectivity Reg. */ - s32 csr14; /* Saved SIA TX/RX Register */ - s32 csr15; /* Saved SIA General Register */ - int save_cnt; /* Flag if state already saved */ - struct sk_buff_head queue; /* Save the (re-ordered) skb's */ - } cache; - struct de4x5_srom srom; /* A copy of the SROM */ - int cfrv; /* Card CFRV copy */ - int rx_ovf; /* Check for 'RX overflow' tag */ - bool useSROM; /* For non-DEC card use SROM */ - bool useMII; /* Infoblock using the MII */ - int asBitValid; /* Autosense bits in GEP? */ - int asPolarity; /* 0 => asserted high */ - int asBit; /* Autosense bit number in GEP */ - int defMedium; /* SROM default medium */ - int tcount; /* Last infoblock number */ - int infoblock_init; /* Initialised this infoblock? */ - int infoleaf_offset; /* SROM infoleaf for controller */ - s32 infoblock_csr6; /* csr6 value in SROM infoblock */ - int infoblock_media; /* infoblock media */ - int (*infoleaf_fn)(struct net_device *); /* Pointer to infoleaf function */ - u_char *rst; /* Pointer to Type 5 reset info */ - u_char ibn; /* Infoblock number */ - struct parameters params; /* Command line/ #defined params */ - struct device *gendev; /* Generic device */ - dma_addr_t dma_rings; /* DMA handle for rings */ - int dma_size; /* Size of the DMA area */ - char *rx_bufs; /* rx bufs on alpha, sparc, ... */ -}; - -/* -** To get around certain poxy cards that don't provide an SROM -** for the second and more DECchip, I have to key off the first -** chip's address. I'll assume there's not a bad SROM iff: -** -** o the chipset is the same -** o the bus number is the same and > 0 -** o the sum of all the returned hw address bytes is 0 or 0x5fa -** -** Also have to save the irq for those cards whose hardware designers -** can't follow the PCI to PCI Bridge Architecture spec. -*/ -static struct { - int chipset; - int bus; - int irq; - u_char addr[ETH_ALEN]; -} last = {0,}; - -/* -** The transmit ring full condition is described by the tx_old and tx_new -** pointers by: -** tx_old = tx_new Empty ring -** tx_old = tx_new+1 Full ring -** tx_old+txRingSize = tx_new+1 Full ring (wrapped condition) -*/ -#define TX_BUFFS_AVAIL ((lp->tx_old<=lp->tx_new)?\ - lp->tx_old+lp->txRingSize-lp->tx_new-1:\ - lp->tx_old -lp->tx_new-1) - -#define TX_PKT_PENDING (lp->tx_old != lp->tx_new) - -/* -** Public Functions -*/ -static int de4x5_open(struct net_device *dev); -static netdev_tx_t de4x5_queue_pkt(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t de4x5_interrupt(int irq, void *dev_id); -static int de4x5_close(struct net_device *dev); -static struct net_device_stats *de4x5_get_stats(struct net_device *dev); -static void de4x5_local_stats(struct net_device *dev, char *buf, int pkt_len); -static void set_multicast_list(struct net_device *dev); -static int de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); - -/* -** Private functions -*/ -static int de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev); -static int de4x5_init(struct net_device *dev); -static int de4x5_sw_reset(struct net_device *dev); -static int de4x5_rx(struct net_device *dev); -static int de4x5_tx(struct net_device *dev); -static void de4x5_ast(struct net_device *dev); -static int de4x5_txur(struct net_device *dev); -static int de4x5_rx_ovfc(struct net_device *dev); - -static int autoconf_media(struct net_device *dev); -static void create_packet(struct net_device *dev, char *frame, int len); -static void load_packet(struct net_device *dev, char *buf, u32 flags, struct sk_buff *skb); -static int dc21040_autoconf(struct net_device *dev); -static int dc21041_autoconf(struct net_device *dev); -static int dc21140m_autoconf(struct net_device *dev); -static int dc2114x_autoconf(struct net_device *dev); -static int srom_autoconf(struct net_device *dev); -static int de4x5_suspect_state(struct net_device *dev, int timeout, int prev_state, int (*fn)(struct net_device *, int), int (*asfn)(struct net_device *)); -static int dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout, int next_state, int suspect_state, int (*fn)(struct net_device *, int)); -static int test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14, s32 csr15, s32 msec); -static int test_for_100Mb(struct net_device *dev, int msec); -static int wait_for_link(struct net_device *dev); -static int test_mii_reg(struct net_device *dev, int reg, int mask, bool pol, long msec); -static int is_spd_100(struct net_device *dev); -static int is_100_up(struct net_device *dev); -static int is_10_up(struct net_device *dev); -static int is_anc_capable(struct net_device *dev); -static int ping_media(struct net_device *dev, int msec); -static struct sk_buff *de4x5_alloc_rx_buff(struct net_device *dev, int index, int len); -static void de4x5_free_rx_buffs(struct net_device *dev); -static void de4x5_free_tx_buffs(struct net_device *dev); -static void de4x5_save_skbs(struct net_device *dev); -static void de4x5_rst_desc_ring(struct net_device *dev); -static void de4x5_cache_state(struct net_device *dev, int flag); -static void de4x5_put_cache(struct net_device *dev, struct sk_buff *skb); -static void de4x5_putb_cache(struct net_device *dev, struct sk_buff *skb); -static struct sk_buff *de4x5_get_cache(struct net_device *dev); -static void de4x5_setup_intr(struct net_device *dev); -static void de4x5_init_connection(struct net_device *dev); -static int de4x5_reset_phy(struct net_device *dev); -static void reset_init_sia(struct net_device *dev, s32 sicr, s32 strr, s32 sigr); -static int test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec); -static int test_tp(struct net_device *dev, s32 msec); -static int EISA_signature(char *name, struct device *device); -static int PCI_signature(char *name, struct de4x5_private *lp); -static void DevicePresent(struct net_device *dev, u_long iobase); -static void enet_addr_rst(u_long aprom_addr); -static int de4x5_bad_srom(struct de4x5_private *lp); -static short srom_rd(u_long address, u_char offset); -static void srom_latch(u_int command, u_long address); -static void srom_command(u_int command, u_long address); -static void srom_address(u_int command, u_long address, u_char offset); -static short srom_data(u_int command, u_long address); -/*static void srom_busy(u_int command, u_long address);*/ -static void sendto_srom(u_int command, u_long addr); -static int getfrom_srom(u_long addr); -static int srom_map_media(struct net_device *dev); -static int srom_infoleaf_info(struct net_device *dev); -static void srom_init(struct net_device *dev); -static void srom_exec(struct net_device *dev, u_char *p); -static int mii_rd(u_char phyreg, u_char phyaddr, u_long ioaddr); -static void mii_wr(int data, u_char phyreg, u_char phyaddr, u_long ioaddr); -static int mii_rdata(u_long ioaddr); -static void mii_wdata(int data, int len, u_long ioaddr); -static void mii_ta(u_long rw, u_long ioaddr); -static int mii_swap(int data, int len); -static void mii_address(u_char addr, u_long ioaddr); -static void sendto_mii(u32 command, int data, u_long ioaddr); -static int getfrom_mii(u32 command, u_long ioaddr); -static int mii_get_oui(u_char phyaddr, u_long ioaddr); -static int mii_get_phy(struct net_device *dev); -static void SetMulticastFilter(struct net_device *dev); -static int get_hw_addr(struct net_device *dev); -static void srom_repair(struct net_device *dev, int card); -static int test_bad_enet(struct net_device *dev, int status); -static int an_exception(struct de4x5_private *lp); -static char *build_setup_frame(struct net_device *dev, int mode); -static void disable_ast(struct net_device *dev); -static long de4x5_switch_mac_port(struct net_device *dev); -static int gep_rd(struct net_device *dev); -static void gep_wr(s32 data, struct net_device *dev); -static void yawn(struct net_device *dev, int state); -static void de4x5_parse_params(struct net_device *dev); -static void de4x5_dbg_open(struct net_device *dev); -static void de4x5_dbg_mii(struct net_device *dev, int k); -static void de4x5_dbg_media(struct net_device *dev); -static void de4x5_dbg_srom(struct de4x5_srom *p); -static void de4x5_dbg_rx(struct sk_buff *skb, int len); -static int de4x5_strncmp(char *a, char *b, int n); -static int dc21041_infoleaf(struct net_device *dev); -static int dc21140_infoleaf(struct net_device *dev); -static int dc21142_infoleaf(struct net_device *dev); -static int dc21143_infoleaf(struct net_device *dev); -static int type0_infoblock(struct net_device *dev, u_char count, u_char *p); -static int type1_infoblock(struct net_device *dev, u_char count, u_char *p); -static int type2_infoblock(struct net_device *dev, u_char count, u_char *p); -static int type3_infoblock(struct net_device *dev, u_char count, u_char *p); -static int type4_infoblock(struct net_device *dev, u_char count, u_char *p); -static int type5_infoblock(struct net_device *dev, u_char count, u_char *p); -static int compact_infoblock(struct net_device *dev, u_char count, u_char *p); - -/* -** Note now that module autoprobing is allowed under EISA and PCI. The -** IRQ lines will not be auto-detected; instead I'll rely on the BIOSes -** to "do the right thing". -*/ - -static int io=0x0;/* EDIT THIS LINE FOR YOUR CONFIGURATION IF NEEDED */ - -module_param(io, int, 0); -module_param(de4x5_debug, int, 0); -module_param(dec_only, int, 0); -module_param(args, charp, 0); - -MODULE_PARM_DESC(io, "de4x5 I/O base address"); -MODULE_PARM_DESC(de4x5_debug, "de4x5 debug mask"); -MODULE_PARM_DESC(dec_only, "de4x5 probe only for Digital boards (0-1)"); -MODULE_PARM_DESC(args, "de4x5 full duplex and media type settings; see de4x5.c for details"); -MODULE_LICENSE("GPL"); - -/* -** List the SROM infoleaf functions and chipsets -*/ -struct InfoLeaf { - int chipset; - int (*fn)(struct net_device *); -}; -static struct InfoLeaf infoleaf_array[] = { - {DC21041, dc21041_infoleaf}, - {DC21140, dc21140_infoleaf}, - {DC21142, dc21142_infoleaf}, - {DC21143, dc21143_infoleaf} -}; -#define INFOLEAF_SIZE ARRAY_SIZE(infoleaf_array) - -/* -** List the SROM info block functions -*/ -static int (*dc_infoblock[])(struct net_device *dev, u_char, u_char *) = { - type0_infoblock, - type1_infoblock, - type2_infoblock, - type3_infoblock, - type4_infoblock, - type5_infoblock, - compact_infoblock -}; - -#define COMPACT (ARRAY_SIZE(dc_infoblock) - 1) - -/* -** Miscellaneous defines... -*/ -#define RESET_DE4X5 {\ - int i;\ - i=inl(DE4X5_BMR);\ - mdelay(1);\ - outl(i | BMR_SWR, DE4X5_BMR);\ - mdelay(1);\ - outl(i, DE4X5_BMR);\ - mdelay(1);\ - for (i=0;i<5;i++) {inl(DE4X5_BMR); mdelay(1);}\ - mdelay(1);\ -} - -#define PHY_HARD_RESET {\ - outl(GEP_HRST, DE4X5_GEP); /* Hard RESET the PHY dev. */\ - mdelay(1); /* Assert for 1ms */\ - outl(0x00, DE4X5_GEP);\ - mdelay(2); /* Wait for 2ms */\ -} - -static const struct net_device_ops de4x5_netdev_ops = { - .ndo_open = de4x5_open, - .ndo_stop = de4x5_close, - .ndo_start_xmit = de4x5_queue_pkt, - .ndo_get_stats = de4x5_get_stats, - .ndo_set_multicast_list = set_multicast_list, - .ndo_do_ioctl = de4x5_ioctl, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address= eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - - -static int __devinit -de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev) -{ - char name[DE4X5_NAME_LENGTH + 1]; - struct de4x5_private *lp = netdev_priv(dev); - struct pci_dev *pdev = NULL; - int i, status=0; - - dev_set_drvdata(gendev, dev); - - /* Ensure we're not sleeping */ - if (lp->bus == EISA) { - outb(WAKEUP, PCI_CFPM); - } else { - pdev = to_pci_dev (gendev); - pci_write_config_byte(pdev, PCI_CFDA_PSM, WAKEUP); - } - mdelay(10); - - RESET_DE4X5; - - if ((inl(DE4X5_STS) & (STS_TS | STS_RS)) != 0) { - return -ENXIO; /* Hardware could not reset */ - } - - /* - ** Now find out what kind of DC21040/DC21041/DC21140 board we have. - */ - lp->useSROM = false; - if (lp->bus == PCI) { - PCI_signature(name, lp); - } else { - EISA_signature(name, gendev); - } - - if (*name == '\0') { /* Not found a board signature */ - return -ENXIO; - } - - dev->base_addr = iobase; - printk ("%s: %s at 0x%04lx", dev_name(gendev), name, iobase); - - status = get_hw_addr(dev); - printk(", h/w address %pM\n", dev->dev_addr); - - if (status != 0) { - printk(" which has an Ethernet PROM CRC error.\n"); - return -ENXIO; - } else { - skb_queue_head_init(&lp->cache.queue); - lp->cache.gepc = GEP_INIT; - lp->asBit = GEP_SLNK; - lp->asPolarity = GEP_SLNK; - lp->asBitValid = ~0; - lp->timeout = -1; - lp->gendev = gendev; - spin_lock_init(&lp->lock); - init_timer(&lp->timer); - lp->timer.function = (void (*)(unsigned long))de4x5_ast; - lp->timer.data = (unsigned long)dev; - de4x5_parse_params(dev); - - /* - ** Choose correct autosensing in case someone messed up - */ - lp->autosense = lp->params.autosense; - if (lp->chipset != DC21140) { - if ((lp->chipset==DC21040) && (lp->params.autosense&TP_NW)) { - lp->params.autosense = TP; - } - if ((lp->chipset==DC21041) && (lp->params.autosense&BNC_AUI)) { - lp->params.autosense = BNC; - } - } - lp->fdx = lp->params.fdx; - sprintf(lp->adapter_name,"%s (%s)", name, dev_name(gendev)); - - lp->dma_size = (NUM_RX_DESC + NUM_TX_DESC) * sizeof(struct de4x5_desc); -#if defined(__alpha__) || defined(__powerpc__) || defined(CONFIG_SPARC) || defined(DE4X5_DO_MEMCPY) - lp->dma_size += RX_BUFF_SZ * NUM_RX_DESC + DE4X5_ALIGN; -#endif - lp->rx_ring = dma_alloc_coherent(gendev, lp->dma_size, - &lp->dma_rings, GFP_ATOMIC); - if (lp->rx_ring == NULL) { - return -ENOMEM; - } - - lp->tx_ring = lp->rx_ring + NUM_RX_DESC; - - /* - ** Set up the RX descriptor ring (Intels) - ** Allocate contiguous receive buffers, long word aligned (Alphas) - */ -#if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY) - for (i=0; i<NUM_RX_DESC; i++) { - lp->rx_ring[i].status = 0; - lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ); - lp->rx_ring[i].buf = 0; - lp->rx_ring[i].next = 0; - lp->rx_skb[i] = (struct sk_buff *) 1; /* Dummy entry */ - } - -#else - { - dma_addr_t dma_rx_bufs; - - dma_rx_bufs = lp->dma_rings + (NUM_RX_DESC + NUM_TX_DESC) - * sizeof(struct de4x5_desc); - dma_rx_bufs = (dma_rx_bufs + DE4X5_ALIGN) & ~DE4X5_ALIGN; - lp->rx_bufs = (char *)(((long)(lp->rx_ring + NUM_RX_DESC - + NUM_TX_DESC) + DE4X5_ALIGN) & ~DE4X5_ALIGN); - for (i=0; i<NUM_RX_DESC; i++) { - lp->rx_ring[i].status = 0; - lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ); - lp->rx_ring[i].buf = - cpu_to_le32(dma_rx_bufs+i*RX_BUFF_SZ); - lp->rx_ring[i].next = 0; - lp->rx_skb[i] = (struct sk_buff *) 1; /* Dummy entry */ - } - - } -#endif - - barrier(); - - lp->rxRingSize = NUM_RX_DESC; - lp->txRingSize = NUM_TX_DESC; - - /* Write the end of list marker to the descriptor lists */ - lp->rx_ring[lp->rxRingSize - 1].des1 |= cpu_to_le32(RD_RER); - lp->tx_ring[lp->txRingSize - 1].des1 |= cpu_to_le32(TD_TER); - - /* Tell the adapter where the TX/RX rings are located. */ - outl(lp->dma_rings, DE4X5_RRBA); - outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc), - DE4X5_TRBA); - - /* Initialise the IRQ mask and Enable/Disable */ - lp->irq_mask = IMR_RIM | IMR_TIM | IMR_TUM | IMR_UNM; - lp->irq_en = IMR_NIM | IMR_AIM; - - /* Create a loopback packet frame for later media probing */ - create_packet(dev, lp->frame, sizeof(lp->frame)); - - /* Check if the RX overflow bug needs testing for */ - i = lp->cfrv & 0x000000fe; - if ((lp->chipset == DC21140) && (i == 0x20)) { - lp->rx_ovf = 1; - } - - /* Initialise the SROM pointers if possible */ - if (lp->useSROM) { - lp->state = INITIALISED; - if (srom_infoleaf_info(dev)) { - dma_free_coherent (gendev, lp->dma_size, - lp->rx_ring, lp->dma_rings); - return -ENXIO; - } - srom_init(dev); - } - - lp->state = CLOSED; - - /* - ** Check for an MII interface - */ - if ((lp->chipset != DC21040) && (lp->chipset != DC21041)) { - mii_get_phy(dev); - } - - printk(" and requires IRQ%d (provided by %s).\n", dev->irq, - ((lp->bus == PCI) ? "PCI BIOS" : "EISA CNFG")); - } - - if (de4x5_debug & DEBUG_VERSION) { - printk(version); - } - - /* The DE4X5-specific entries in the device structure. */ - SET_NETDEV_DEV(dev, gendev); - dev->netdev_ops = &de4x5_netdev_ops; - dev->mem_start = 0; - - /* Fill in the generic fields of the device structure. */ - if ((status = register_netdev (dev))) { - dma_free_coherent (gendev, lp->dma_size, - lp->rx_ring, lp->dma_rings); - return status; - } - - /* Let the adapter sleep to save power */ - yawn(dev, SLEEP); - - return status; -} - - -static int -de4x5_open(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - int i, status = 0; - s32 omr; - - /* Allocate the RX buffers */ - for (i=0; i<lp->rxRingSize; i++) { - if (de4x5_alloc_rx_buff(dev, i, 0) == NULL) { - de4x5_free_rx_buffs(dev); - return -EAGAIN; - } - } - - /* - ** Wake up the adapter - */ - yawn(dev, WAKEUP); - - /* - ** Re-initialize the DE4X5... - */ - status = de4x5_init(dev); - spin_lock_init(&lp->lock); - lp->state = OPEN; - de4x5_dbg_open(dev); - - if (request_irq(dev->irq, de4x5_interrupt, IRQF_SHARED, - lp->adapter_name, dev)) { - printk("de4x5_open(): Requested IRQ%d is busy - attemping FAST/SHARE...", dev->irq); - if (request_irq(dev->irq, de4x5_interrupt, IRQF_DISABLED | IRQF_SHARED, - lp->adapter_name, dev)) { - printk("\n Cannot get IRQ- reconfigure your hardware.\n"); - disable_ast(dev); - de4x5_free_rx_buffs(dev); - de4x5_free_tx_buffs(dev); - yawn(dev, SLEEP); - lp->state = CLOSED; - return -EAGAIN; - } else { - printk("\n Succeeded, but you should reconfigure your hardware to avoid this.\n"); - printk("WARNING: there may be IRQ related problems in heavily loaded systems.\n"); - } - } - - lp->interrupt = UNMASK_INTERRUPTS; - dev->trans_start = jiffies; /* prevent tx timeout */ - - START_DE4X5; - - de4x5_setup_intr(dev); - - if (de4x5_debug & DEBUG_OPEN) { - printk("\tsts: 0x%08x\n", inl(DE4X5_STS)); - printk("\tbmr: 0x%08x\n", inl(DE4X5_BMR)); - printk("\timr: 0x%08x\n", inl(DE4X5_IMR)); - printk("\tomr: 0x%08x\n", inl(DE4X5_OMR)); - printk("\tsisr: 0x%08x\n", inl(DE4X5_SISR)); - printk("\tsicr: 0x%08x\n", inl(DE4X5_SICR)); - printk("\tstrr: 0x%08x\n", inl(DE4X5_STRR)); - printk("\tsigr: 0x%08x\n", inl(DE4X5_SIGR)); - } - - return status; -} - -/* -** Initialize the DE4X5 operating conditions. NB: a chip problem with the -** DC21140 requires using perfect filtering mode for that chip. Since I can't -** see why I'd want > 14 multicast addresses, I have changed all chips to use -** the perfect filtering mode. Keep the DMA burst length at 8: there seems -** to be data corruption problems if it is larger (UDP errors seen from a -** ttcp source). -*/ -static int -de4x5_init(struct net_device *dev) -{ - /* Lock out other processes whilst setting up the hardware */ - netif_stop_queue(dev); - - de4x5_sw_reset(dev); - - /* Autoconfigure the connected port */ - autoconf_media(dev); - - return 0; -} - -static int -de4x5_sw_reset(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - int i, j, status = 0; - s32 bmr, omr; - - /* Select the MII or SRL port now and RESET the MAC */ - if (!lp->useSROM) { - if (lp->phy[lp->active].id != 0) { - lp->infoblock_csr6 = OMR_SDP | OMR_PS | OMR_HBD; - } else { - lp->infoblock_csr6 = OMR_SDP | OMR_TTM; - } - de4x5_switch_mac_port(dev); - } - - /* - ** Set the programmable burst length to 8 longwords for all the DC21140 - ** Fasternet chips and 4 longwords for all others: DMA errors result - ** without these values. Cache align 16 long. - */ - bmr = (lp->chipset==DC21140 ? PBL_8 : PBL_4) | DESC_SKIP_LEN | DE4X5_CACHE_ALIGN; - bmr |= ((lp->chipset & ~0x00ff)==DC2114x ? BMR_RML : 0); - outl(bmr, DE4X5_BMR); - - omr = inl(DE4X5_OMR) & ~OMR_PR; /* Turn off promiscuous mode */ - if (lp->chipset == DC21140) { - omr |= (OMR_SDP | OMR_SB); - } - lp->setup_f = PERFECT; - outl(lp->dma_rings, DE4X5_RRBA); - outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc), - DE4X5_TRBA); - - lp->rx_new = lp->rx_old = 0; - lp->tx_new = lp->tx_old = 0; - - for (i = 0; i < lp->rxRingSize; i++) { - lp->rx_ring[i].status = cpu_to_le32(R_OWN); - } - - for (i = 0; i < lp->txRingSize; i++) { - lp->tx_ring[i].status = cpu_to_le32(0); - } - - barrier(); - - /* Build the setup frame depending on filtering mode */ - SetMulticastFilter(dev); - - load_packet(dev, lp->setup_frame, PERFECT_F|TD_SET|SETUP_FRAME_LEN, (struct sk_buff *)1); - outl(omr|OMR_ST, DE4X5_OMR); - - /* Poll for setup frame completion (adapter interrupts are disabled now) */ - - for (j=0, i=0;(i<500) && (j==0);i++) { /* Upto 500ms delay */ - mdelay(1); - if ((s32)le32_to_cpu(lp->tx_ring[lp->tx_new].status) >= 0) j=1; - } - outl(omr, DE4X5_OMR); /* Stop everything! */ - - if (j == 0) { - printk("%s: Setup frame timed out, status %08x\n", dev->name, - inl(DE4X5_STS)); - status = -EIO; - } - - lp->tx_new = (lp->tx_new + 1) % lp->txRingSize; - lp->tx_old = lp->tx_new; - - return status; -} - -/* -** Writes a socket buffer address to the next available transmit descriptor. -*/ -static netdev_tx_t -de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - u_long flags = 0; - - netif_stop_queue(dev); - if (!lp->tx_enable) /* Cannot send for now */ - return NETDEV_TX_LOCKED; - - /* - ** Clean out the TX ring asynchronously to interrupts - sometimes the - ** interrupts are lost by delayed descriptor status updates relative to - ** the irq assertion, especially with a busy PCI bus. - */ - spin_lock_irqsave(&lp->lock, flags); - de4x5_tx(dev); - spin_unlock_irqrestore(&lp->lock, flags); - - /* Test if cache is already locked - requeue skb if so */ - if (test_and_set_bit(0, (void *)&lp->cache.lock) && !lp->interrupt) - return NETDEV_TX_LOCKED; - - /* Transmit descriptor ring full or stale skb */ - if (netif_queue_stopped(dev) || (u_long) lp->tx_skb[lp->tx_new] > 1) { - if (lp->interrupt) { - de4x5_putb_cache(dev, skb); /* Requeue the buffer */ - } else { - de4x5_put_cache(dev, skb); - } - if (de4x5_debug & DEBUG_TX) { - printk("%s: transmit busy, lost media or stale skb found:\n STS:%08x\n tbusy:%d\n IMR:%08x\n OMR:%08x\n Stale skb: %s\n",dev->name, inl(DE4X5_STS), netif_queue_stopped(dev), inl(DE4X5_IMR), inl(DE4X5_OMR), ((u_long) lp->tx_skb[lp->tx_new] > 1) ? "YES" : "NO"); - } - } else if (skb->len > 0) { - /* If we already have stuff queued locally, use that first */ - if (!skb_queue_empty(&lp->cache.queue) && !lp->interrupt) { - de4x5_put_cache(dev, skb); - skb = de4x5_get_cache(dev); - } - - while (skb && !netif_queue_stopped(dev) && - (u_long) lp->tx_skb[lp->tx_new] <= 1) { - spin_lock_irqsave(&lp->lock, flags); - netif_stop_queue(dev); - load_packet(dev, skb->data, TD_IC | TD_LS | TD_FS | skb->len, skb); - lp->stats.tx_bytes += skb->len; - outl(POLL_DEMAND, DE4X5_TPD);/* Start the TX */ - - lp->tx_new = (lp->tx_new + 1) % lp->txRingSize; - - if (TX_BUFFS_AVAIL) { - netif_start_queue(dev); /* Another pkt may be queued */ - } - skb = de4x5_get_cache(dev); - spin_unlock_irqrestore(&lp->lock, flags); - } - if (skb) de4x5_putb_cache(dev, skb); - } - - lp->cache.lock = 0; - - return NETDEV_TX_OK; -} - -/* -** The DE4X5 interrupt handler. -** -** I/O Read/Writes through intermediate PCI bridges are never 'posted', -** so that the asserted interrupt always has some real data to work with - -** if these I/O accesses are ever changed to memory accesses, ensure the -** STS write is read immediately to complete the transaction if the adapter -** is not on bus 0. Lost interrupts can still occur when the PCI bus load -** is high and descriptor status bits cannot be set before the associated -** interrupt is asserted and this routine entered. -*/ -static irqreturn_t -de4x5_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct de4x5_private *lp; - s32 imr, omr, sts, limit; - u_long iobase; - unsigned int handled = 0; - - lp = netdev_priv(dev); - spin_lock(&lp->lock); - iobase = dev->base_addr; - - DISABLE_IRQs; /* Ensure non re-entrancy */ - - if (test_and_set_bit(MASK_INTERRUPTS, (void*) &lp->interrupt)) - printk("%s: Re-entering the interrupt handler.\n", dev->name); - - synchronize_irq(dev->irq); - - for (limit=0; limit<8; limit++) { - sts = inl(DE4X5_STS); /* Read IRQ status */ - outl(sts, DE4X5_STS); /* Reset the board interrupts */ - - if (!(sts & lp->irq_mask)) break;/* All done */ - handled = 1; - - if (sts & (STS_RI | STS_RU)) /* Rx interrupt (packet[s] arrived) */ - de4x5_rx(dev); - - if (sts & (STS_TI | STS_TU)) /* Tx interrupt (packet sent) */ - de4x5_tx(dev); - - if (sts & STS_LNF) { /* TP Link has failed */ - lp->irq_mask &= ~IMR_LFM; - } - - if (sts & STS_UNF) { /* Transmit underrun */ - de4x5_txur(dev); - } - - if (sts & STS_SE) { /* Bus Error */ - STOP_DE4X5; - printk("%s: Fatal bus error occurred, sts=%#8x, device stopped.\n", - dev->name, sts); - spin_unlock(&lp->lock); - return IRQ_HANDLED; - } - } - - /* Load the TX ring with any locally stored packets */ - if (!test_and_set_bit(0, (void *)&lp->cache.lock)) { - while (!skb_queue_empty(&lp->cache.queue) && !netif_queue_stopped(dev) && lp->tx_enable) { - de4x5_queue_pkt(de4x5_get_cache(dev), dev); - } - lp->cache.lock = 0; - } - - lp->interrupt = UNMASK_INTERRUPTS; - ENABLE_IRQs; - spin_unlock(&lp->lock); - - return IRQ_RETVAL(handled); -} - -static int -de4x5_rx(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - int entry; - s32 status; - - for (entry=lp->rx_new; (s32)le32_to_cpu(lp->rx_ring[entry].status)>=0; - entry=lp->rx_new) { - status = (s32)le32_to_cpu(lp->rx_ring[entry].status); - - if (lp->rx_ovf) { - if (inl(DE4X5_MFC) & MFC_FOCM) { - de4x5_rx_ovfc(dev); - break; - } - } - - if (status & RD_FS) { /* Remember the start of frame */ - lp->rx_old = entry; - } - - if (status & RD_LS) { /* Valid frame status */ - if (lp->tx_enable) lp->linkOK++; - if (status & RD_ES) { /* There was an error. */ - lp->stats.rx_errors++; /* Update the error stats. */ - if (status & (RD_RF | RD_TL)) lp->stats.rx_frame_errors++; - if (status & RD_CE) lp->stats.rx_crc_errors++; - if (status & RD_OF) lp->stats.rx_fifo_errors++; - if (status & RD_TL) lp->stats.rx_length_errors++; - if (status & RD_RF) lp->pktStats.rx_runt_frames++; - if (status & RD_CS) lp->pktStats.rx_collision++; - if (status & RD_DB) lp->pktStats.rx_dribble++; - if (status & RD_OF) lp->pktStats.rx_overflow++; - } else { /* A valid frame received */ - struct sk_buff *skb; - short pkt_len = (short)(le32_to_cpu(lp->rx_ring[entry].status) - >> 16) - 4; - - if ((skb = de4x5_alloc_rx_buff(dev, entry, pkt_len)) == NULL) { - printk("%s: Insufficient memory; nuking packet.\n", - dev->name); - lp->stats.rx_dropped++; - } else { - de4x5_dbg_rx(skb, pkt_len); - - /* Push up the protocol stack */ - skb->protocol=eth_type_trans(skb,dev); - de4x5_local_stats(dev, skb->data, pkt_len); - netif_rx(skb); - - /* Update stats */ - lp->stats.rx_packets++; - lp->stats.rx_bytes += pkt_len; - } - } - - /* Change buffer ownership for this frame, back to the adapter */ - for (;lp->rx_old!=entry;lp->rx_old=(lp->rx_old + 1)%lp->rxRingSize) { - lp->rx_ring[lp->rx_old].status = cpu_to_le32(R_OWN); - barrier(); - } - lp->rx_ring[entry].status = cpu_to_le32(R_OWN); - barrier(); - } - - /* - ** Update entry information - */ - lp->rx_new = (lp->rx_new + 1) % lp->rxRingSize; - } - - return 0; -} - -static inline void -de4x5_free_tx_buff(struct de4x5_private *lp, int entry) -{ - dma_unmap_single(lp->gendev, le32_to_cpu(lp->tx_ring[entry].buf), - le32_to_cpu(lp->tx_ring[entry].des1) & TD_TBS1, - DMA_TO_DEVICE); - if ((u_long) lp->tx_skb[entry] > 1) - dev_kfree_skb_irq(lp->tx_skb[entry]); - lp->tx_skb[entry] = NULL; -} - -/* -** Buffer sent - check for TX buffer errors. -*/ -static int -de4x5_tx(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - int entry; - s32 status; - - for (entry = lp->tx_old; entry != lp->tx_new; entry = lp->tx_old) { - status = (s32)le32_to_cpu(lp->tx_ring[entry].status); - if (status < 0) { /* Buffer not sent yet */ - break; - } else if (status != 0x7fffffff) { /* Not setup frame */ - if (status & TD_ES) { /* An error happened */ - lp->stats.tx_errors++; - if (status & TD_NC) lp->stats.tx_carrier_errors++; - if (status & TD_LC) lp->stats.tx_window_errors++; - if (status & TD_UF) lp->stats.tx_fifo_errors++; - if (status & TD_EC) lp->pktStats.excessive_collisions++; - if (status & TD_DE) lp->stats.tx_aborted_errors++; - - if (TX_PKT_PENDING) { - outl(POLL_DEMAND, DE4X5_TPD);/* Restart a stalled TX */ - } - } else { /* Packet sent */ - lp->stats.tx_packets++; - if (lp->tx_enable) lp->linkOK++; - } - /* Update the collision counter */ - lp->stats.collisions += ((status & TD_EC) ? 16 : - ((status & TD_CC) >> 3)); - - /* Free the buffer. */ - if (lp->tx_skb[entry] != NULL) - de4x5_free_tx_buff(lp, entry); - } - - /* Update all the pointers */ - lp->tx_old = (lp->tx_old + 1) % lp->txRingSize; - } - - /* Any resources available? */ - if (TX_BUFFS_AVAIL && netif_queue_stopped(dev)) { - if (lp->interrupt) - netif_wake_queue(dev); - else - netif_start_queue(dev); - } - - return 0; -} - -static void -de4x5_ast(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - int next_tick = DE4X5_AUTOSENSE_MS; - int dt; - - if (lp->useSROM) - next_tick = srom_autoconf(dev); - else if (lp->chipset == DC21140) - next_tick = dc21140m_autoconf(dev); - else if (lp->chipset == DC21041) - next_tick = dc21041_autoconf(dev); - else if (lp->chipset == DC21040) - next_tick = dc21040_autoconf(dev); - lp->linkOK = 0; - - dt = (next_tick * HZ) / 1000; - - if (!dt) - dt = 1; - - mod_timer(&lp->timer, jiffies + dt); -} - -static int -de4x5_txur(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - int omr; - - omr = inl(DE4X5_OMR); - if (!(omr & OMR_SF) || (lp->chipset==DC21041) || (lp->chipset==DC21040)) { - omr &= ~(OMR_ST|OMR_SR); - outl(omr, DE4X5_OMR); - while (inl(DE4X5_STS) & STS_TS); - if ((omr & OMR_TR) < OMR_TR) { - omr += 0x4000; - } else { - omr |= OMR_SF; - } - outl(omr | OMR_ST | OMR_SR, DE4X5_OMR); - } - - return 0; -} - -static int -de4x5_rx_ovfc(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - int omr; - - omr = inl(DE4X5_OMR); - outl(omr & ~OMR_SR, DE4X5_OMR); - while (inl(DE4X5_STS) & STS_RS); - - for (; (s32)le32_to_cpu(lp->rx_ring[lp->rx_new].status)>=0;) { - lp->rx_ring[lp->rx_new].status = cpu_to_le32(R_OWN); - lp->rx_new = (lp->rx_new + 1) % lp->rxRingSize; - } - - outl(omr, DE4X5_OMR); - - return 0; -} - -static int -de4x5_close(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - s32 imr, omr; - - disable_ast(dev); - - netif_stop_queue(dev); - - if (de4x5_debug & DEBUG_CLOSE) { - printk("%s: Shutting down ethercard, status was %8.8x.\n", - dev->name, inl(DE4X5_STS)); - } - - /* - ** We stop the DE4X5 here... mask interrupts and stop TX & RX - */ - DISABLE_IRQs; - STOP_DE4X5; - - /* Free the associated irq */ - free_irq(dev->irq, dev); - lp->state = CLOSED; - - /* Free any socket buffers */ - de4x5_free_rx_buffs(dev); - de4x5_free_tx_buffs(dev); - - /* Put the adapter to sleep to save power */ - yawn(dev, SLEEP); - - return 0; -} - -static struct net_device_stats * -de4x5_get_stats(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - - lp->stats.rx_missed_errors = (int)(inl(DE4X5_MFC) & (MFC_OVFL | MFC_CNTR)); - - return &lp->stats; -} - -static void -de4x5_local_stats(struct net_device *dev, char *buf, int pkt_len) -{ - struct de4x5_private *lp = netdev_priv(dev); - int i; - - for (i=1; i<DE4X5_PKT_STAT_SZ-1; i++) { - if (pkt_len < (i*DE4X5_PKT_BIN_SZ)) { - lp->pktStats.bins[i]++; - i = DE4X5_PKT_STAT_SZ; - } - } - if (buf[0] & 0x01) { /* Multicast/Broadcast */ - if ((*(s32 *)&buf[0] == -1) && (*(s16 *)&buf[4] == -1)) { - lp->pktStats.broadcast++; - } else { - lp->pktStats.multicast++; - } - } else if ((*(s32 *)&buf[0] == *(s32 *)&dev->dev_addr[0]) && - (*(s16 *)&buf[4] == *(s16 *)&dev->dev_addr[4])) { - lp->pktStats.unicast++; - } - - lp->pktStats.bins[0]++; /* Duplicates stats.rx_packets */ - if (lp->pktStats.bins[0] == 0) { /* Reset counters */ - memset((char *)&lp->pktStats, 0, sizeof(lp->pktStats)); - } -} - -/* -** Removes the TD_IC flag from previous descriptor to improve TX performance. -** If the flag is changed on a descriptor that is being read by the hardware, -** I assume PCI transaction ordering will mean you are either successful or -** just miss asserting the change to the hardware. Anyway you're messing with -** a descriptor you don't own, but this shouldn't kill the chip provided -** the descriptor register is read only to the hardware. -*/ -static void -load_packet(struct net_device *dev, char *buf, u32 flags, struct sk_buff *skb) -{ - struct de4x5_private *lp = netdev_priv(dev); - int entry = (lp->tx_new ? lp->tx_new-1 : lp->txRingSize-1); - dma_addr_t buf_dma = dma_map_single(lp->gendev, buf, flags & TD_TBS1, DMA_TO_DEVICE); - - lp->tx_ring[lp->tx_new].buf = cpu_to_le32(buf_dma); - lp->tx_ring[lp->tx_new].des1 &= cpu_to_le32(TD_TER); - lp->tx_ring[lp->tx_new].des1 |= cpu_to_le32(flags); - lp->tx_skb[lp->tx_new] = skb; - lp->tx_ring[entry].des1 &= cpu_to_le32(~TD_IC); - barrier(); - - lp->tx_ring[lp->tx_new].status = cpu_to_le32(T_OWN); - barrier(); -} - -/* -** Set or clear the multicast filter for this adaptor. -*/ -static void -set_multicast_list(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - - /* First, double check that the adapter is open */ - if (lp->state == OPEN) { - if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ - u32 omr; - omr = inl(DE4X5_OMR); - omr |= OMR_PR; - outl(omr, DE4X5_OMR); - } else { - SetMulticastFilter(dev); - load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET | - SETUP_FRAME_LEN, (struct sk_buff *)1); - - lp->tx_new = (lp->tx_new + 1) % lp->txRingSize; - outl(POLL_DEMAND, DE4X5_TPD); /* Start the TX */ - dev->trans_start = jiffies; /* prevent tx timeout */ - } - } -} - -/* -** Calculate the hash code and update the logical address filter -** from a list of ethernet multicast addresses. -** Little endian crc one liner from Matt Thomas, DEC. -*/ -static void -SetMulticastFilter(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - struct netdev_hw_addr *ha; - u_long iobase = dev->base_addr; - int i, bit, byte; - u16 hashcode; - u32 omr, crc; - char *pa; - unsigned char *addrs; - - omr = inl(DE4X5_OMR); - omr &= ~(OMR_PR | OMR_PM); - pa = build_setup_frame(dev, ALL); /* Build the basic frame */ - - if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 14)) { - omr |= OMR_PM; /* Pass all multicasts */ - } else if (lp->setup_f == HASH_PERF) { /* Hash Filtering */ - netdev_for_each_mc_addr(ha, dev) { - addrs = ha->addr; - if ((*addrs & 0x01) == 1) { /* multicast address? */ - crc = ether_crc_le(ETH_ALEN, addrs); - hashcode = crc & HASH_BITS; /* hashcode is 9 LSb of CRC */ - - byte = hashcode >> 3; /* bit[3-8] -> byte in filter */ - bit = 1 << (hashcode & 0x07);/* bit[0-2] -> bit in byte */ - - byte <<= 1; /* calc offset into setup frame */ - if (byte & 0x02) { - byte -= 1; - } - lp->setup_frame[byte] |= bit; - } - } - } else { /* Perfect filtering */ - netdev_for_each_mc_addr(ha, dev) { - addrs = ha->addr; - for (i=0; i<ETH_ALEN; i++) { - *(pa + (i&1)) = *addrs++; - if (i & 0x01) pa += 4; - } - } - } - outl(omr, DE4X5_OMR); -} - -#ifdef CONFIG_EISA - -static u_char de4x5_irq[] = EISA_ALLOWED_IRQ_LIST; - -static int __init de4x5_eisa_probe (struct device *gendev) -{ - struct eisa_device *edev; - u_long iobase; - u_char irq, regval; - u_short vendor; - u32 cfid; - int status, device; - struct net_device *dev; - struct de4x5_private *lp; - - edev = to_eisa_device (gendev); - iobase = edev->base_addr; - - if (!request_region (iobase, DE4X5_EISA_TOTAL_SIZE, "de4x5")) - return -EBUSY; - - if (!request_region (iobase + DE4X5_EISA_IO_PORTS, - DE4X5_EISA_TOTAL_SIZE, "de4x5")) { - status = -EBUSY; - goto release_reg_1; - } - - if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) { - status = -ENOMEM; - goto release_reg_2; - } - lp = netdev_priv(dev); - - cfid = (u32) inl(PCI_CFID); - lp->cfrv = (u_short) inl(PCI_CFRV); - device = (cfid >> 8) & 0x00ffff00; - vendor = (u_short) cfid; - - /* Read the EISA Configuration Registers */ - regval = inb(EISA_REG0) & (ER0_INTL | ER0_INTT); -#ifdef CONFIG_ALPHA - /* Looks like the Jensen firmware (rev 2.2) doesn't really - * care about the EISA configuration, and thus doesn't - * configure the PLX bridge properly. Oh well... Simply mimic - * the EISA config file to sort it out. */ - - /* EISA REG1: Assert DecChip 21040 HW Reset */ - outb (ER1_IAM | 1, EISA_REG1); - mdelay (1); - - /* EISA REG1: Deassert DecChip 21040 HW Reset */ - outb (ER1_IAM, EISA_REG1); - mdelay (1); - - /* EISA REG3: R/W Burst Transfer Enable */ - outb (ER3_BWE | ER3_BRE, EISA_REG3); - - /* 32_bit slave/master, Preempt Time=23 bclks, Unlatched Interrupt */ - outb (ER0_BSW | ER0_BMW | ER0_EPT | regval, EISA_REG0); -#endif - irq = de4x5_irq[(regval >> 1) & 0x03]; - - if (is_DC2114x) { - device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143); - } - lp->chipset = device; - lp->bus = EISA; - - /* Write the PCI Configuration Registers */ - outl(PCI_COMMAND_IO | PCI_COMMAND_MASTER, PCI_CFCS); - outl(0x00006000, PCI_CFLT); - outl(iobase, PCI_CBIO); - - DevicePresent(dev, EISA_APROM); - - dev->irq = irq; - - if (!(status = de4x5_hw_init (dev, iobase, gendev))) { - return 0; - } - - free_netdev (dev); - release_reg_2: - release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE); - release_reg_1: - release_region (iobase, DE4X5_EISA_TOTAL_SIZE); - - return status; -} - -static int __devexit de4x5_eisa_remove (struct device *device) -{ - struct net_device *dev; - u_long iobase; - - dev = dev_get_drvdata(device); - iobase = dev->base_addr; - - unregister_netdev (dev); - free_netdev (dev); - release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE); - release_region (iobase, DE4X5_EISA_TOTAL_SIZE); - - return 0; -} - -static struct eisa_device_id de4x5_eisa_ids[] = { - { "DEC4250", 0 }, /* 0 is the board name index... */ - { "" } -}; -MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids); - -static struct eisa_driver de4x5_eisa_driver = { - .id_table = de4x5_eisa_ids, - .driver = { - .name = "de4x5", - .probe = de4x5_eisa_probe, - .remove = __devexit_p (de4x5_eisa_remove), - } -}; -MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids); -#endif - -#ifdef CONFIG_PCI - -/* -** This function searches the current bus (which is >0) for a DECchip with an -** SROM, so that in multiport cards that have one SROM shared between multiple -** DECchips, we can find the base SROM irrespective of the BIOS scan direction. -** For single port cards this is a time waster... -*/ -static void __devinit -srom_search(struct net_device *dev, struct pci_dev *pdev) -{ - u_char pb; - u_short vendor, status; - u_int irq = 0, device; - u_long iobase = 0; /* Clear upper 32 bits in Alphas */ - int i, j; - struct de4x5_private *lp = netdev_priv(dev); - struct list_head *walk; - - list_for_each(walk, &pdev->bus_list) { - struct pci_dev *this_dev = pci_dev_b(walk); - - /* Skip the pci_bus list entry */ - if (list_entry(walk, struct pci_bus, devices) == pdev->bus) continue; - - vendor = this_dev->vendor; - device = this_dev->device << 8; - if (!(is_DC21040 || is_DC21041 || is_DC21140 || is_DC2114x)) continue; - - /* Get the chip configuration revision register */ - pb = this_dev->bus->number; - - /* Set the device number information */ - lp->device = PCI_SLOT(this_dev->devfn); - lp->bus_num = pb; - - /* Set the chipset information */ - if (is_DC2114x) { - device = ((this_dev->revision & CFRV_RN) < DC2114x_BRK - ? DC21142 : DC21143); - } - lp->chipset = device; - - /* Get the board I/O address (64 bits on sparc64) */ - iobase = pci_resource_start(this_dev, 0); - - /* Fetch the IRQ to be used */ - irq = this_dev->irq; - if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) continue; - - /* Check if I/O accesses are enabled */ - pci_read_config_word(this_dev, PCI_COMMAND, &status); - if (!(status & PCI_COMMAND_IO)) continue; - - /* Search for a valid SROM attached to this DECchip */ - DevicePresent(dev, DE4X5_APROM); - for (j=0, i=0; i<ETH_ALEN; i++) { - j += (u_char) *((u_char *)&lp->srom + SROM_HWADD + i); - } - if (j != 0 && j != 6 * 0xff) { - last.chipset = device; - last.bus = pb; - last.irq = irq; - for (i=0; i<ETH_ALEN; i++) { - last.addr[i] = (u_char)*((u_char *)&lp->srom + SROM_HWADD + i); - } - return; - } - } -} - -/* -** PCI bus I/O device probe -** NB: PCI I/O accesses and Bus Mastering are enabled by the PCI BIOS, not -** the driver. Some PCI BIOS's, pre V2.1, need the slot + features to be -** enabled by the user first in the set up utility. Hence we just check for -** enabled features and silently ignore the card if they're not. -** -** STOP PRESS: Some BIOS's __require__ the driver to enable the bus mastering -** bit. Here, check for I/O accesses and then set BM. If you put the card in -** a non BM slot, you're on your own (and complain to the PC vendor that your -** PC doesn't conform to the PCI standard)! -** -** This function is only compatible with the *latest* 2.1.x kernels. For 2.0.x -** kernels use the V0.535[n] drivers. -*/ - -static int __devinit de4x5_pci_probe (struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - u_char pb, pbus = 0, dev_num, dnum = 0, timer; - u_short vendor, status; - u_int irq = 0, device; - u_long iobase = 0; /* Clear upper 32 bits in Alphas */ - int error; - struct net_device *dev; - struct de4x5_private *lp; - - dev_num = PCI_SLOT(pdev->devfn); - pb = pdev->bus->number; - - if (io) { /* probe a single PCI device */ - pbus = (u_short)(io >> 8); - dnum = (u_short)(io & 0xff); - if ((pbus != pb) || (dnum != dev_num)) - return -ENODEV; - } - - vendor = pdev->vendor; - device = pdev->device << 8; - if (!(is_DC21040 || is_DC21041 || is_DC21140 || is_DC2114x)) - return -ENODEV; - - /* Ok, the device seems to be for us. */ - if ((error = pci_enable_device (pdev))) - return error; - - if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) { - error = -ENOMEM; - goto disable_dev; - } - - lp = netdev_priv(dev); - lp->bus = PCI; - lp->bus_num = 0; - - /* Search for an SROM on this bus */ - if (lp->bus_num != pb) { - lp->bus_num = pb; - srom_search(dev, pdev); - } - - /* Get the chip configuration revision register */ - lp->cfrv = pdev->revision; - - /* Set the device number information */ - lp->device = dev_num; - lp->bus_num = pb; - - /* Set the chipset information */ - if (is_DC2114x) { - device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143); - } - lp->chipset = device; - - /* Get the board I/O address (64 bits on sparc64) */ - iobase = pci_resource_start(pdev, 0); - - /* Fetch the IRQ to be used */ - irq = pdev->irq; - if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) { - error = -ENODEV; - goto free_dev; - } - - /* Check if I/O accesses and Bus Mastering are enabled */ - pci_read_config_word(pdev, PCI_COMMAND, &status); -#ifdef __powerpc__ - if (!(status & PCI_COMMAND_IO)) { - status |= PCI_COMMAND_IO; - pci_write_config_word(pdev, PCI_COMMAND, status); - pci_read_config_word(pdev, PCI_COMMAND, &status); - } -#endif /* __powerpc__ */ - if (!(status & PCI_COMMAND_IO)) { - error = -ENODEV; - goto free_dev; - } - - if (!(status & PCI_COMMAND_MASTER)) { - status |= PCI_COMMAND_MASTER; - pci_write_config_word(pdev, PCI_COMMAND, status); - pci_read_config_word(pdev, PCI_COMMAND, &status); - } - if (!(status & PCI_COMMAND_MASTER)) { - error = -ENODEV; - goto free_dev; - } - - /* Check the latency timer for values >= 0x60 */ - pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &timer); - if (timer < 0x60) { - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x60); - } - - DevicePresent(dev, DE4X5_APROM); - - if (!request_region (iobase, DE4X5_PCI_TOTAL_SIZE, "de4x5")) { - error = -EBUSY; - goto free_dev; - } - - dev->irq = irq; - - if ((error = de4x5_hw_init(dev, iobase, &pdev->dev))) { - goto release; - } - - return 0; - - release: - release_region (iobase, DE4X5_PCI_TOTAL_SIZE); - free_dev: - free_netdev (dev); - disable_dev: - pci_disable_device (pdev); - return error; -} - -static void __devexit de4x5_pci_remove (struct pci_dev *pdev) -{ - struct net_device *dev; - u_long iobase; - - dev = dev_get_drvdata(&pdev->dev); - iobase = dev->base_addr; - - unregister_netdev (dev); - free_netdev (dev); - release_region (iobase, DE4X5_PCI_TOTAL_SIZE); - pci_disable_device (pdev); -} - -static struct pci_device_id de4x5_pci_tbl[] = { - { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_PLUS, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, - { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, - { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, - { }, -}; - -static struct pci_driver de4x5_pci_driver = { - .name = "de4x5", - .id_table = de4x5_pci_tbl, - .probe = de4x5_pci_probe, - .remove = __devexit_p (de4x5_pci_remove), -}; - -#endif - -/* -** Auto configure the media here rather than setting the port at compile -** time. This routine is called by de4x5_init() and when a loss of media is -** detected (excessive collisions, loss of carrier, no carrier or link fail -** [TP] or no recent receive activity) to check whether the user has been -** sneaky and changed the port on us. -*/ -static int -autoconf_media(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - - disable_ast(dev); - - lp->c_media = AUTO; /* Bogus last media */ - inl(DE4X5_MFC); /* Zero the lost frames counter */ - lp->media = INIT; - lp->tcount = 0; - - de4x5_ast(dev); - - return lp->media; -} - -/* -** Autoconfigure the media when using the DC21040. AUI cannot be distinguished -** from BNC as the port has a jumper to set thick or thin wire. When set for -** BNC, the BNC port will indicate activity if it's not terminated correctly. -** The only way to test for that is to place a loopback packet onto the -** network and watch for errors. Since we're messing with the interrupt mask -** register, disable the board interrupts and do not allow any more packets to -** be queued to the hardware. Re-enable everything only when the media is -** found. -** I may have to "age out" locally queued packets so that the higher layer -** timeouts don't effectively duplicate packets on the network. -*/ -static int -dc21040_autoconf(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - int next_tick = DE4X5_AUTOSENSE_MS; - s32 imr; - - switch (lp->media) { - case INIT: - DISABLE_IRQs; - lp->tx_enable = false; - lp->timeout = -1; - de4x5_save_skbs(dev); - if ((lp->autosense == AUTO) || (lp->autosense == TP)) { - lp->media = TP; - } else if ((lp->autosense == BNC) || (lp->autosense == AUI) || (lp->autosense == BNC_AUI)) { - lp->media = BNC_AUI; - } else if (lp->autosense == EXT_SIA) { - lp->media = EXT_SIA; - } else { - lp->media = NC; - } - lp->local_state = 0; - next_tick = dc21040_autoconf(dev); - break; - - case TP: - next_tick = dc21040_state(dev, 0x8f01, 0xffff, 0x0000, 3000, BNC_AUI, - TP_SUSPECT, test_tp); - break; - - case TP_SUSPECT: - next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21040_autoconf); - break; - - case BNC: - case AUI: - case BNC_AUI: - next_tick = dc21040_state(dev, 0x8f09, 0x0705, 0x0006, 3000, EXT_SIA, - BNC_AUI_SUSPECT, ping_media); - break; - - case BNC_AUI_SUSPECT: - next_tick = de4x5_suspect_state(dev, 1000, BNC_AUI, ping_media, dc21040_autoconf); - break; - - case EXT_SIA: - next_tick = dc21040_state(dev, 0x3041, 0x0000, 0x0006, 3000, - NC, EXT_SIA_SUSPECT, ping_media); - break; - - case EXT_SIA_SUSPECT: - next_tick = de4x5_suspect_state(dev, 1000, EXT_SIA, ping_media, dc21040_autoconf); - break; - - case NC: - /* default to TP for all */ - reset_init_sia(dev, 0x8f01, 0xffff, 0x0000); - if (lp->media != lp->c_media) { - de4x5_dbg_media(dev); - lp->c_media = lp->media; - } - lp->media = INIT; - lp->tx_enable = false; - break; - } - - return next_tick; -} - -static int -dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout, - int next_state, int suspect_state, - int (*fn)(struct net_device *, int)) -{ - struct de4x5_private *lp = netdev_priv(dev); - int next_tick = DE4X5_AUTOSENSE_MS; - int linkBad; - - switch (lp->local_state) { - case 0: - reset_init_sia(dev, csr13, csr14, csr15); - lp->local_state++; - next_tick = 500; - break; - - case 1: - if (!lp->tx_enable) { - linkBad = fn(dev, timeout); - if (linkBad < 0) { - next_tick = linkBad & ~TIMER_CB; - } else { - if (linkBad && (lp->autosense == AUTO)) { - lp->local_state = 0; - lp->media = next_state; - } else { - de4x5_init_connection(dev); - } - } - } else if (!lp->linkOK && (lp->autosense == AUTO)) { - lp->media = suspect_state; - next_tick = 3000; - } - break; - } - - return next_tick; -} - -static int -de4x5_suspect_state(struct net_device *dev, int timeout, int prev_state, - int (*fn)(struct net_device *, int), - int (*asfn)(struct net_device *)) -{ - struct de4x5_private *lp = netdev_priv(dev); - int next_tick = DE4X5_AUTOSENSE_MS; - int linkBad; - - switch (lp->local_state) { - case 1: - if (lp->linkOK) { - lp->media = prev_state; - } else { - lp->local_state++; - next_tick = asfn(dev); - } - break; - - case 2: - linkBad = fn(dev, timeout); - if (linkBad < 0) { - next_tick = linkBad & ~TIMER_CB; - } else if (!linkBad) { - lp->local_state--; - lp->media = prev_state; - } else { - lp->media = INIT; - lp->tcount++; - } - } - - return next_tick; -} - -/* -** Autoconfigure the media when using the DC21041. AUI needs to be tested -** before BNC, because the BNC port will indicate activity if it's not -** terminated correctly. The only way to test for that is to place a loopback -** packet onto the network and watch for errors. Since we're messing with -** the interrupt mask register, disable the board interrupts and do not allow -** any more packets to be queued to the hardware. Re-enable everything only -** when the media is found. -*/ -static int -dc21041_autoconf(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - s32 sts, irqs, irq_mask, imr, omr; - int next_tick = DE4X5_AUTOSENSE_MS; - - switch (lp->media) { - case INIT: - DISABLE_IRQs; - lp->tx_enable = false; - lp->timeout = -1; - de4x5_save_skbs(dev); /* Save non transmitted skb's */ - if ((lp->autosense == AUTO) || (lp->autosense == TP_NW)) { - lp->media = TP; /* On chip auto negotiation is broken */ - } else if (lp->autosense == TP) { - lp->media = TP; - } else if (lp->autosense == BNC) { - lp->media = BNC; - } else if (lp->autosense == AUI) { - lp->media = AUI; - } else { - lp->media = NC; - } - lp->local_state = 0; - next_tick = dc21041_autoconf(dev); - break; - - case TP_NW: - if (lp->timeout < 0) { - omr = inl(DE4X5_OMR);/* Set up full duplex for the autonegotiate */ - outl(omr | OMR_FDX, DE4X5_OMR); - } - irqs = STS_LNF | STS_LNP; - irq_mask = IMR_LFM | IMR_LPM; - sts = test_media(dev, irqs, irq_mask, 0xef01, 0xffff, 0x0008, 2400); - if (sts < 0) { - next_tick = sts & ~TIMER_CB; - } else { - if (sts & STS_LNP) { - lp->media = ANS; - } else { - lp->media = AUI; - } - next_tick = dc21041_autoconf(dev); - } - break; - - case ANS: - if (!lp->tx_enable) { - irqs = STS_LNP; - irq_mask = IMR_LPM; - sts = test_ans(dev, irqs, irq_mask, 3000); - if (sts < 0) { - next_tick = sts & ~TIMER_CB; - } else { - if (!(sts & STS_LNP) && (lp->autosense == AUTO)) { - lp->media = TP; - next_tick = dc21041_autoconf(dev); - } else { - lp->local_state = 1; - de4x5_init_connection(dev); - } - } - } else if (!lp->linkOK && (lp->autosense == AUTO)) { - lp->media = ANS_SUSPECT; - next_tick = 3000; - } - break; - - case ANS_SUSPECT: - next_tick = de4x5_suspect_state(dev, 1000, ANS, test_tp, dc21041_autoconf); - break; - - case TP: - if (!lp->tx_enable) { - if (lp->timeout < 0) { - omr = inl(DE4X5_OMR); /* Set up half duplex for TP */ - outl(omr & ~OMR_FDX, DE4X5_OMR); - } - irqs = STS_LNF | STS_LNP; - irq_mask = IMR_LFM | IMR_LPM; - sts = test_media(dev,irqs, irq_mask, 0xef01, 0xff3f, 0x0008, 2400); - if (sts < 0) { - next_tick = sts & ~TIMER_CB; - } else { - if (!(sts & STS_LNP) && (lp->autosense == AUTO)) { - if (inl(DE4X5_SISR) & SISR_NRA) { - lp->media = AUI; /* Non selected port activity */ - } else { - lp->media = BNC; - } - next_tick = dc21041_autoconf(dev); - } else { - lp->local_state = 1; - de4x5_init_connection(dev); - } - } - } else if (!lp->linkOK && (lp->autosense == AUTO)) { - lp->media = TP_SUSPECT; - next_tick = 3000; - } - break; - - case TP_SUSPECT: - next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21041_autoconf); - break; - - case AUI: - if (!lp->tx_enable) { - if (lp->timeout < 0) { - omr = inl(DE4X5_OMR); /* Set up half duplex for AUI */ - outl(omr & ~OMR_FDX, DE4X5_OMR); - } - irqs = 0; - irq_mask = 0; - sts = test_media(dev,irqs, irq_mask, 0xef09, 0xf73d, 0x000e, 1000); - if (sts < 0) { - next_tick = sts & ~TIMER_CB; - } else { - if (!(inl(DE4X5_SISR) & SISR_SRA) && (lp->autosense == AUTO)) { - lp->media = BNC; - next_tick = dc21041_autoconf(dev); - } else { - lp->local_state = 1; - de4x5_init_connection(dev); - } - } - } else if (!lp->linkOK && (lp->autosense == AUTO)) { - lp->media = AUI_SUSPECT; - next_tick = 3000; - } - break; - - case AUI_SUSPECT: - next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc21041_autoconf); - break; - - case BNC: - switch (lp->local_state) { - case 0: - if (lp->timeout < 0) { - omr = inl(DE4X5_OMR); /* Set up half duplex for BNC */ - outl(omr & ~OMR_FDX, DE4X5_OMR); - } - irqs = 0; - irq_mask = 0; - sts = test_media(dev,irqs, irq_mask, 0xef09, 0xf73d, 0x0006, 1000); - if (sts < 0) { - next_tick = sts & ~TIMER_CB; - } else { - lp->local_state++; /* Ensure media connected */ - next_tick = dc21041_autoconf(dev); - } - break; - - case 1: - if (!lp->tx_enable) { - if ((sts = ping_media(dev, 3000)) < 0) { - next_tick = sts & ~TIMER_CB; - } else { - if (sts) { - lp->local_state = 0; - lp->media = NC; - } else { - de4x5_init_connection(dev); - } - } - } else if (!lp->linkOK && (lp->autosense == AUTO)) { - lp->media = BNC_SUSPECT; - next_tick = 3000; - } - break; - } - break; - - case BNC_SUSPECT: - next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc21041_autoconf); - break; - - case NC: - omr = inl(DE4X5_OMR); /* Set up full duplex for the autonegotiate */ - outl(omr | OMR_FDX, DE4X5_OMR); - reset_init_sia(dev, 0xef01, 0xffff, 0x0008);/* Initialise the SIA */ - if (lp->media != lp->c_media) { - de4x5_dbg_media(dev); - lp->c_media = lp->media; - } - lp->media = INIT; - lp->tx_enable = false; - break; - } - - return next_tick; -} - -/* -** Some autonegotiation chips are broken in that they do not return the -** acknowledge bit (anlpa & MII_ANLPA_ACK) in the link partner advertisement -** register, except at the first power up negotiation. -*/ -static int -dc21140m_autoconf(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - int ana, anlpa, cap, cr, slnk, sr; - int next_tick = DE4X5_AUTOSENSE_MS; - u_long imr, omr, iobase = dev->base_addr; - - switch(lp->media) { - case INIT: - if (lp->timeout < 0) { - DISABLE_IRQs; - lp->tx_enable = false; - lp->linkOK = 0; - de4x5_save_skbs(dev); /* Save non transmitted skb's */ - } - if ((next_tick = de4x5_reset_phy(dev)) < 0) { - next_tick &= ~TIMER_CB; - } else { - if (lp->useSROM) { - if (srom_map_media(dev) < 0) { - lp->tcount++; - return next_tick; - } - srom_exec(dev, lp->phy[lp->active].gep); - if (lp->infoblock_media == ANS) { - ana = lp->phy[lp->active].ana | MII_ANA_CSMA; - mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII); - } - } else { - lp->tmp = MII_SR_ASSC; /* Fake out the MII speed set */ - SET_10Mb; - if (lp->autosense == _100Mb) { - lp->media = _100Mb; - } else if (lp->autosense == _10Mb) { - lp->media = _10Mb; - } else if ((lp->autosense == AUTO) && - ((sr=is_anc_capable(dev)) & MII_SR_ANC)) { - ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA); - ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM); - mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII); - lp->media = ANS; - } else if (lp->autosense == AUTO) { - lp->media = SPD_DET; - } else if (is_spd_100(dev) && is_100_up(dev)) { - lp->media = _100Mb; - } else { - lp->media = NC; - } - } - lp->local_state = 0; - next_tick = dc21140m_autoconf(dev); - } - break; - - case ANS: - switch (lp->local_state) { - case 0: - if (lp->timeout < 0) { - mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII); - } - cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, false, 500); - if (cr < 0) { - next_tick = cr & ~TIMER_CB; - } else { - if (cr) { - lp->local_state = 0; - lp->media = SPD_DET; - } else { - lp->local_state++; - } - next_tick = dc21140m_autoconf(dev); - } - break; - - case 1: - if ((sr=test_mii_reg(dev, MII_SR, MII_SR_ASSC, true, 2000)) < 0) { - next_tick = sr & ~TIMER_CB; - } else { - lp->media = SPD_DET; - lp->local_state = 0; - if (sr) { /* Success! */ - lp->tmp = MII_SR_ASSC; - anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII); - ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII); - if (!(anlpa & MII_ANLPA_RF) && - (cap = anlpa & MII_ANLPA_TAF & ana)) { - if (cap & MII_ANA_100M) { - lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) != 0; - lp->media = _100Mb; - } else if (cap & MII_ANA_10M) { - lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) != 0; - - lp->media = _10Mb; - } - } - } /* Auto Negotiation failed to finish */ - next_tick = dc21140m_autoconf(dev); - } /* Auto Negotiation failed to start */ - break; - } - break; - - case SPD_DET: /* Choose 10Mb/s or 100Mb/s */ - if (lp->timeout < 0) { - lp->tmp = (lp->phy[lp->active].id ? MII_SR_LKS : - (~gep_rd(dev) & GEP_LNP)); - SET_100Mb_PDET; - } - if ((slnk = test_for_100Mb(dev, 6500)) < 0) { - next_tick = slnk & ~TIMER_CB; - } else { - if (is_spd_100(dev) && is_100_up(dev)) { - lp->media = _100Mb; - } else if ((!is_spd_100(dev) && (is_10_up(dev) & lp->tmp))) { - lp->media = _10Mb; - } else { - lp->media = NC; - } - next_tick = dc21140m_autoconf(dev); - } - break; - - case _100Mb: /* Set 100Mb/s */ - next_tick = 3000; - if (!lp->tx_enable) { - SET_100Mb; - de4x5_init_connection(dev); - } else { - if (!lp->linkOK && (lp->autosense == AUTO)) { - if (!is_100_up(dev) || (!lp->useSROM && !is_spd_100(dev))) { - lp->media = INIT; - lp->tcount++; - next_tick = DE4X5_AUTOSENSE_MS; - } - } - } - break; - - case BNC: - case AUI: - case _10Mb: /* Set 10Mb/s */ - next_tick = 3000; - if (!lp->tx_enable) { - SET_10Mb; - de4x5_init_connection(dev); - } else { - if (!lp->linkOK && (lp->autosense == AUTO)) { - if (!is_10_up(dev) || (!lp->useSROM && is_spd_100(dev))) { - lp->media = INIT; - lp->tcount++; - next_tick = DE4X5_AUTOSENSE_MS; - } - } - } - break; - - case NC: - if (lp->media != lp->c_media) { - de4x5_dbg_media(dev); - lp->c_media = lp->media; - } - lp->media = INIT; - lp->tx_enable = false; - break; - } - - return next_tick; -} - -/* -** This routine may be merged into dc21140m_autoconf() sometime as I'm -** changing how I figure out the media - but trying to keep it backwards -** compatible with the de500-xa and de500-aa. -** Whether it's BNC, AUI, SYM or MII is sorted out in the infoblock -** functions and set during de4x5_mac_port() and/or de4x5_reset_phy(). -** This routine just has to figure out whether 10Mb/s or 100Mb/s is -** active. -** When autonegotiation is working, the ANS part searches the SROM for -** the highest common speed (TP) link that both can run and if that can -** be full duplex. That infoblock is executed and then the link speed set. -** -** Only _10Mb and _100Mb are tested here. -*/ -static int -dc2114x_autoconf(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - s32 cr, anlpa, ana, cap, irqs, irq_mask, imr, omr, slnk, sr, sts; - int next_tick = DE4X5_AUTOSENSE_MS; - - switch (lp->media) { - case INIT: - if (lp->timeout < 0) { - DISABLE_IRQs; - lp->tx_enable = false; - lp->linkOK = 0; - lp->timeout = -1; - de4x5_save_skbs(dev); /* Save non transmitted skb's */ - if (lp->params.autosense & ~AUTO) { - srom_map_media(dev); /* Fixed media requested */ - if (lp->media != lp->params.autosense) { - lp->tcount++; - lp->media = INIT; - return next_tick; - } - lp->media = INIT; - } - } - if ((next_tick = de4x5_reset_phy(dev)) < 0) { - next_tick &= ~TIMER_CB; - } else { - if (lp->autosense == _100Mb) { - lp->media = _100Mb; - } else if (lp->autosense == _10Mb) { - lp->media = _10Mb; - } else if (lp->autosense == TP) { - lp->media = TP; - } else if (lp->autosense == BNC) { - lp->media = BNC; - } else if (lp->autosense == AUI) { - lp->media = AUI; - } else { - lp->media = SPD_DET; - if ((lp->infoblock_media == ANS) && - ((sr=is_anc_capable(dev)) & MII_SR_ANC)) { - ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA); - ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM); - mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII); - lp->media = ANS; - } - } - lp->local_state = 0; - next_tick = dc2114x_autoconf(dev); - } - break; - - case ANS: - switch (lp->local_state) { - case 0: - if (lp->timeout < 0) { - mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII); - } - cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, false, 500); - if (cr < 0) { - next_tick = cr & ~TIMER_CB; - } else { - if (cr) { - lp->local_state = 0; - lp->media = SPD_DET; - } else { - lp->local_state++; - } - next_tick = dc2114x_autoconf(dev); - } - break; - - case 1: - sr = test_mii_reg(dev, MII_SR, MII_SR_ASSC, true, 2000); - if (sr < 0) { - next_tick = sr & ~TIMER_CB; - } else { - lp->media = SPD_DET; - lp->local_state = 0; - if (sr) { /* Success! */ - lp->tmp = MII_SR_ASSC; - anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII); - ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII); - if (!(anlpa & MII_ANLPA_RF) && - (cap = anlpa & MII_ANLPA_TAF & ana)) { - if (cap & MII_ANA_100M) { - lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) != 0; - lp->media = _100Mb; - } else if (cap & MII_ANA_10M) { - lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) != 0; - lp->media = _10Mb; - } - } - } /* Auto Negotiation failed to finish */ - next_tick = dc2114x_autoconf(dev); - } /* Auto Negotiation failed to start */ - break; - } - break; - - case AUI: - if (!lp->tx_enable) { - if (lp->timeout < 0) { - omr = inl(DE4X5_OMR); /* Set up half duplex for AUI */ - outl(omr & ~OMR_FDX, DE4X5_OMR); - } - irqs = 0; - irq_mask = 0; - sts = test_media(dev,irqs, irq_mask, 0, 0, 0, 1000); - if (sts < 0) { - next_tick = sts & ~TIMER_CB; - } else { - if (!(inl(DE4X5_SISR) & SISR_SRA) && (lp->autosense == AUTO)) { - lp->media = BNC; - next_tick = dc2114x_autoconf(dev); - } else { - lp->local_state = 1; - de4x5_init_connection(dev); - } - } - } else if (!lp->linkOK && (lp->autosense == AUTO)) { - lp->media = AUI_SUSPECT; - next_tick = 3000; - } - break; - - case AUI_SUSPECT: - next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc2114x_autoconf); - break; - - case BNC: - switch (lp->local_state) { - case 0: - if (lp->timeout < 0) { - omr = inl(DE4X5_OMR); /* Set up half duplex for BNC */ - outl(omr & ~OMR_FDX, DE4X5_OMR); - } - irqs = 0; - irq_mask = 0; - sts = test_media(dev,irqs, irq_mask, 0, 0, 0, 1000); - if (sts < 0) { - next_tick = sts & ~TIMER_CB; - } else { - lp->local_state++; /* Ensure media connected */ - next_tick = dc2114x_autoconf(dev); - } - break; - - case 1: - if (!lp->tx_enable) { - if ((sts = ping_media(dev, 3000)) < 0) { - next_tick = sts & ~TIMER_CB; - } else { - if (sts) { - lp->local_state = 0; - lp->tcount++; - lp->media = INIT; - } else { - de4x5_init_connection(dev); - } - } - } else if (!lp->linkOK && (lp->autosense == AUTO)) { - lp->media = BNC_SUSPECT; - next_tick = 3000; - } - break; - } - break; - - case BNC_SUSPECT: - next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc2114x_autoconf); - break; - - case SPD_DET: /* Choose 10Mb/s or 100Mb/s */ - if (srom_map_media(dev) < 0) { - lp->tcount++; - lp->media = INIT; - return next_tick; - } - if (lp->media == _100Mb) { - if ((slnk = test_for_100Mb(dev, 6500)) < 0) { - lp->media = SPD_DET; - return slnk & ~TIMER_CB; - } - } else { - if (wait_for_link(dev) < 0) { - lp->media = SPD_DET; - return PDET_LINK_WAIT; - } - } - if (lp->media == ANS) { /* Do MII parallel detection */ - if (is_spd_100(dev)) { - lp->media = _100Mb; - } else { - lp->media = _10Mb; - } - next_tick = dc2114x_autoconf(dev); - } else if (((lp->media == _100Mb) && is_100_up(dev)) || - (((lp->media == _10Mb) || (lp->media == TP) || - (lp->media == BNC) || (lp->media == AUI)) && - is_10_up(dev))) { - next_tick = dc2114x_autoconf(dev); - } else { - lp->tcount++; - lp->media = INIT; - } - break; - - case _10Mb: - next_tick = 3000; - if (!lp->tx_enable) { - SET_10Mb; - de4x5_init_connection(dev); - } else { - if (!lp->linkOK && (lp->autosense == AUTO)) { - if (!is_10_up(dev) || (!lp->useSROM && is_spd_100(dev))) { - lp->media = INIT; - lp->tcount++; - next_tick = DE4X5_AUTOSENSE_MS; - } - } - } - break; - - case _100Mb: - next_tick = 3000; - if (!lp->tx_enable) { - SET_100Mb; - de4x5_init_connection(dev); - } else { - if (!lp->linkOK && (lp->autosense == AUTO)) { - if (!is_100_up(dev) || (!lp->useSROM && !is_spd_100(dev))) { - lp->media = INIT; - lp->tcount++; - next_tick = DE4X5_AUTOSENSE_MS; - } - } - } - break; - - default: - lp->tcount++; -printk("Huh?: media:%02x\n", lp->media); - lp->media = INIT; - break; - } - - return next_tick; -} - -static int -srom_autoconf(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - - return lp->infoleaf_fn(dev); -} - -/* -** This mapping keeps the original media codes and FDX flag unchanged. -** While it isn't strictly necessary, it helps me for the moment... -** The early return avoids a media state / SROM media space clash. -*/ -static int -srom_map_media(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - - lp->fdx = false; - if (lp->infoblock_media == lp->media) - return 0; - - switch(lp->infoblock_media) { - case SROM_10BASETF: - if (!lp->params.fdx) return -1; - lp->fdx = true; - case SROM_10BASET: - if (lp->params.fdx && !lp->fdx) return -1; - if ((lp->chipset == DC21140) || ((lp->chipset & ~0x00ff) == DC2114x)) { - lp->media = _10Mb; - } else { - lp->media = TP; - } - break; - - case SROM_10BASE2: - lp->media = BNC; - break; - - case SROM_10BASE5: - lp->media = AUI; - break; - - case SROM_100BASETF: - if (!lp->params.fdx) return -1; - lp->fdx = true; - case SROM_100BASET: - if (lp->params.fdx && !lp->fdx) return -1; - lp->media = _100Mb; - break; - - case SROM_100BASET4: - lp->media = _100Mb; - break; - - case SROM_100BASEFF: - if (!lp->params.fdx) return -1; - lp->fdx = true; - case SROM_100BASEF: - if (lp->params.fdx && !lp->fdx) return -1; - lp->media = _100Mb; - break; - - case ANS: - lp->media = ANS; - lp->fdx = lp->params.fdx; - break; - - default: - printk("%s: Bad media code [%d] detected in SROM!\n", dev->name, - lp->infoblock_media); - return -1; - break; - } - - return 0; -} - -static void -de4x5_init_connection(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - u_long flags = 0; - - if (lp->media != lp->c_media) { - de4x5_dbg_media(dev); - lp->c_media = lp->media; /* Stop scrolling media messages */ - } - - spin_lock_irqsave(&lp->lock, flags); - de4x5_rst_desc_ring(dev); - de4x5_setup_intr(dev); - lp->tx_enable = true; - spin_unlock_irqrestore(&lp->lock, flags); - outl(POLL_DEMAND, DE4X5_TPD); - - netif_wake_queue(dev); -} - -/* -** General PHY reset function. Some MII devices don't reset correctly -** since their MII address pins can float at voltages that are dependent -** on the signal pin use. Do a double reset to ensure a reset. -*/ -static int -de4x5_reset_phy(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - int next_tick = 0; - - if ((lp->useSROM) || (lp->phy[lp->active].id)) { - if (lp->timeout < 0) { - if (lp->useSROM) { - if (lp->phy[lp->active].rst) { - srom_exec(dev, lp->phy[lp->active].rst); - srom_exec(dev, lp->phy[lp->active].rst); - } else if (lp->rst) { /* Type 5 infoblock reset */ - srom_exec(dev, lp->rst); - srom_exec(dev, lp->rst); - } - } else { - PHY_HARD_RESET; - } - if (lp->useMII) { - mii_wr(MII_CR_RST, MII_CR, lp->phy[lp->active].addr, DE4X5_MII); - } - } - if (lp->useMII) { - next_tick = test_mii_reg(dev, MII_CR, MII_CR_RST, false, 500); - } - } else if (lp->chipset == DC21140) { - PHY_HARD_RESET; - } - - return next_tick; -} - -static int -test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14, s32 csr15, s32 msec) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - s32 sts, csr12; - - if (lp->timeout < 0) { - lp->timeout = msec/100; - if (!lp->useSROM) { /* Already done if by SROM, else dc2104[01] */ - reset_init_sia(dev, csr13, csr14, csr15); - } - - /* set up the interrupt mask */ - outl(irq_mask, DE4X5_IMR); - - /* clear all pending interrupts */ - sts = inl(DE4X5_STS); - outl(sts, DE4X5_STS); - - /* clear csr12 NRA and SRA bits */ - if ((lp->chipset == DC21041) || lp->useSROM) { - csr12 = inl(DE4X5_SISR); - outl(csr12, DE4X5_SISR); - } - } - - sts = inl(DE4X5_STS) & ~TIMER_CB; - - if (!(sts & irqs) && --lp->timeout) { - sts = 100 | TIMER_CB; - } else { - lp->timeout = -1; - } - - return sts; -} - -static int -test_tp(struct net_device *dev, s32 msec) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - int sisr; - - if (lp->timeout < 0) { - lp->timeout = msec/100; - } - - sisr = (inl(DE4X5_SISR) & ~TIMER_CB) & (SISR_LKF | SISR_NCR); - - if (sisr && --lp->timeout) { - sisr = 100 | TIMER_CB; - } else { - lp->timeout = -1; - } - - return sisr; -} - -/* -** Samples the 100Mb Link State Signal. The sample interval is important -** because too fast a rate can give erroneous results and confuse the -** speed sense algorithm. -*/ -#define SAMPLE_INTERVAL 500 /* ms */ -#define SAMPLE_DELAY 2000 /* ms */ -static int -test_for_100Mb(struct net_device *dev, int msec) -{ - struct de4x5_private *lp = netdev_priv(dev); - int gep = 0, ret = ((lp->chipset & ~0x00ff)==DC2114x? -1 :GEP_SLNK); - - if (lp->timeout < 0) { - if ((msec/SAMPLE_INTERVAL) <= 0) return 0; - if (msec > SAMPLE_DELAY) { - lp->timeout = (msec - SAMPLE_DELAY)/SAMPLE_INTERVAL; - gep = SAMPLE_DELAY | TIMER_CB; - return gep; - } else { - lp->timeout = msec/SAMPLE_INTERVAL; - } - } - - if (lp->phy[lp->active].id || lp->useSROM) { - gep = is_100_up(dev) | is_spd_100(dev); - } else { - gep = (~gep_rd(dev) & (GEP_SLNK | GEP_LNP)); - } - if (!(gep & ret) && --lp->timeout) { - gep = SAMPLE_INTERVAL | TIMER_CB; - } else { - lp->timeout = -1; - } - - return gep; -} - -static int -wait_for_link(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - - if (lp->timeout < 0) { - lp->timeout = 1; - } - - if (lp->timeout--) { - return TIMER_CB; - } else { - lp->timeout = -1; - } - - return 0; -} - -/* -** -** -*/ -static int -test_mii_reg(struct net_device *dev, int reg, int mask, bool pol, long msec) -{ - struct de4x5_private *lp = netdev_priv(dev); - int test; - u_long iobase = dev->base_addr; - - if (lp->timeout < 0) { - lp->timeout = msec/100; - } - - reg = mii_rd((u_char)reg, lp->phy[lp->active].addr, DE4X5_MII) & mask; - test = (reg ^ (pol ? ~0 : 0)) & mask; - - if (test && --lp->timeout) { - reg = 100 | TIMER_CB; - } else { - lp->timeout = -1; - } - - return reg; -} - -static int -is_spd_100(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - int spd; - - if (lp->useMII) { - spd = mii_rd(lp->phy[lp->active].spd.reg, lp->phy[lp->active].addr, DE4X5_MII); - spd = ~(spd ^ lp->phy[lp->active].spd.value); - spd &= lp->phy[lp->active].spd.mask; - } else if (!lp->useSROM) { /* de500-xa */ - spd = ((~gep_rd(dev)) & GEP_SLNK); - } else { - if ((lp->ibn == 2) || !lp->asBitValid) - return (lp->chipset == DC21143) ? (~inl(DE4X5_SISR)&SISR_LS100) : 0; - - spd = (lp->asBitValid & (lp->asPolarity ^ (gep_rd(dev) & lp->asBit))) | - (lp->linkOK & ~lp->asBitValid); - } - - return spd; -} - -static int -is_100_up(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - - if (lp->useMII) { - /* Double read for sticky bits & temporary drops */ - mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII); - return mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII) & MII_SR_LKS; - } else if (!lp->useSROM) { /* de500-xa */ - return (~gep_rd(dev)) & GEP_SLNK; - } else { - if ((lp->ibn == 2) || !lp->asBitValid) - return (lp->chipset == DC21143) ? (~inl(DE4X5_SISR)&SISR_LS100) : 0; - - return (lp->asBitValid&(lp->asPolarity^(gep_rd(dev)&lp->asBit))) | - (lp->linkOK & ~lp->asBitValid); - } -} - -static int -is_10_up(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - - if (lp->useMII) { - /* Double read for sticky bits & temporary drops */ - mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII); - return mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII) & MII_SR_LKS; - } else if (!lp->useSROM) { /* de500-xa */ - return (~gep_rd(dev)) & GEP_LNP; - } else { - if ((lp->ibn == 2) || !lp->asBitValid) - return ((lp->chipset & ~0x00ff) == DC2114x) ? - (~inl(DE4X5_SISR)&SISR_LS10): - 0; - - return (lp->asBitValid&(lp->asPolarity^(gep_rd(dev)&lp->asBit))) | - (lp->linkOK & ~lp->asBitValid); - } -} - -static int -is_anc_capable(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - - if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) { - return mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII); - } else if ((lp->chipset & ~0x00ff) == DC2114x) { - return (inl(DE4X5_SISR) & SISR_LPN) >> 12; - } else { - return 0; - } -} - -/* -** Send a packet onto the media and watch for send errors that indicate the -** media is bad or unconnected. -*/ -static int -ping_media(struct net_device *dev, int msec) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - int sisr; - - if (lp->timeout < 0) { - lp->timeout = msec/100; - - lp->tmp = lp->tx_new; /* Remember the ring position */ - load_packet(dev, lp->frame, TD_LS | TD_FS | sizeof(lp->frame), (struct sk_buff *)1); - lp->tx_new = (lp->tx_new + 1) % lp->txRingSize; - outl(POLL_DEMAND, DE4X5_TPD); - } - - sisr = inl(DE4X5_SISR); - - if ((!(sisr & SISR_NCR)) && - ((s32)le32_to_cpu(lp->tx_ring[lp->tmp].status) < 0) && - (--lp->timeout)) { - sisr = 100 | TIMER_CB; - } else { - if ((!(sisr & SISR_NCR)) && - !(le32_to_cpu(lp->tx_ring[lp->tmp].status) & (T_OWN | TD_ES)) && - lp->timeout) { - sisr = 0; - } else { - sisr = 1; - } - lp->timeout = -1; - } - - return sisr; -} - -/* -** This function does 2 things: on Intels it kmalloc's another buffer to -** replace the one about to be passed up. On Alpha's it kmallocs a buffer -** into which the packet is copied. -*/ -static struct sk_buff * -de4x5_alloc_rx_buff(struct net_device *dev, int index, int len) -{ - struct de4x5_private *lp = netdev_priv(dev); - struct sk_buff *p; - -#if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY) - struct sk_buff *ret; - u_long i=0, tmp; - - p = dev_alloc_skb(IEEE802_3_SZ + DE4X5_ALIGN + 2); - if (!p) return NULL; - - tmp = virt_to_bus(p->data); - i = ((tmp + DE4X5_ALIGN) & ~DE4X5_ALIGN) - tmp; - skb_reserve(p, i); - lp->rx_ring[index].buf = cpu_to_le32(tmp + i); - - ret = lp->rx_skb[index]; - lp->rx_skb[index] = p; - - if ((u_long) ret > 1) { - skb_put(ret, len); - } - - return ret; - -#else - if (lp->state != OPEN) return (struct sk_buff *)1; /* Fake out the open */ - - p = dev_alloc_skb(len + 2); - if (!p) return NULL; - - skb_reserve(p, 2); /* Align */ - if (index < lp->rx_old) { /* Wrapped buffer */ - short tlen = (lp->rxRingSize - lp->rx_old) * RX_BUFF_SZ; - memcpy(skb_put(p,tlen),lp->rx_bufs + lp->rx_old * RX_BUFF_SZ,tlen); - memcpy(skb_put(p,len-tlen),lp->rx_bufs,len-tlen); - } else { /* Linear buffer */ - memcpy(skb_put(p,len),lp->rx_bufs + lp->rx_old * RX_BUFF_SZ,len); - } - - return p; -#endif -} - -static void -de4x5_free_rx_buffs(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - int i; - - for (i=0; i<lp->rxRingSize; i++) { - if ((u_long) lp->rx_skb[i] > 1) { - dev_kfree_skb(lp->rx_skb[i]); - } - lp->rx_ring[i].status = 0; - lp->rx_skb[i] = (struct sk_buff *)1; /* Dummy entry */ - } -} - -static void -de4x5_free_tx_buffs(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - int i; - - for (i=0; i<lp->txRingSize; i++) { - if (lp->tx_skb[i]) - de4x5_free_tx_buff(lp, i); - lp->tx_ring[i].status = 0; - } - - /* Unload the locally queued packets */ - __skb_queue_purge(&lp->cache.queue); -} - -/* -** When a user pulls a connection, the DECchip can end up in a -** 'running - waiting for end of transmission' state. This means that we -** have to perform a chip soft reset to ensure that we can synchronize -** the hardware and software and make any media probes using a loopback -** packet meaningful. -*/ -static void -de4x5_save_skbs(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - s32 omr; - - if (!lp->cache.save_cnt) { - STOP_DE4X5; - de4x5_tx(dev); /* Flush any sent skb's */ - de4x5_free_tx_buffs(dev); - de4x5_cache_state(dev, DE4X5_SAVE_STATE); - de4x5_sw_reset(dev); - de4x5_cache_state(dev, DE4X5_RESTORE_STATE); - lp->cache.save_cnt++; - START_DE4X5; - } -} - -static void -de4x5_rst_desc_ring(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - int i; - s32 omr; - - if (lp->cache.save_cnt) { - STOP_DE4X5; - outl(lp->dma_rings, DE4X5_RRBA); - outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc), - DE4X5_TRBA); - - lp->rx_new = lp->rx_old = 0; - lp->tx_new = lp->tx_old = 0; - - for (i = 0; i < lp->rxRingSize; i++) { - lp->rx_ring[i].status = cpu_to_le32(R_OWN); - } - - for (i = 0; i < lp->txRingSize; i++) { - lp->tx_ring[i].status = cpu_to_le32(0); - } - - barrier(); - lp->cache.save_cnt--; - START_DE4X5; - } -} - -static void -de4x5_cache_state(struct net_device *dev, int flag) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - - switch(flag) { - case DE4X5_SAVE_STATE: - lp->cache.csr0 = inl(DE4X5_BMR); - lp->cache.csr6 = (inl(DE4X5_OMR) & ~(OMR_ST | OMR_SR)); - lp->cache.csr7 = inl(DE4X5_IMR); - break; - - case DE4X5_RESTORE_STATE: - outl(lp->cache.csr0, DE4X5_BMR); - outl(lp->cache.csr6, DE4X5_OMR); - outl(lp->cache.csr7, DE4X5_IMR); - if (lp->chipset == DC21140) { - gep_wr(lp->cache.gepc, dev); - gep_wr(lp->cache.gep, dev); - } else { - reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14, - lp->cache.csr15); - } - break; - } -} - -static void -de4x5_put_cache(struct net_device *dev, struct sk_buff *skb) -{ - struct de4x5_private *lp = netdev_priv(dev); - - __skb_queue_tail(&lp->cache.queue, skb); -} - -static void -de4x5_putb_cache(struct net_device *dev, struct sk_buff *skb) -{ - struct de4x5_private *lp = netdev_priv(dev); - - __skb_queue_head(&lp->cache.queue, skb); -} - -static struct sk_buff * -de4x5_get_cache(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - - return __skb_dequeue(&lp->cache.queue); -} - -/* -** Check the Auto Negotiation State. Return OK when a link pass interrupt -** is received and the auto-negotiation status is NWAY OK. -*/ -static int -test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - s32 sts, ans; - - if (lp->timeout < 0) { - lp->timeout = msec/100; - outl(irq_mask, DE4X5_IMR); - - /* clear all pending interrupts */ - sts = inl(DE4X5_STS); - outl(sts, DE4X5_STS); - } - - ans = inl(DE4X5_SISR) & SISR_ANS; - sts = inl(DE4X5_STS) & ~TIMER_CB; - - if (!(sts & irqs) && (ans ^ ANS_NWOK) && --lp->timeout) { - sts = 100 | TIMER_CB; - } else { - lp->timeout = -1; - } - - return sts; -} - -static void -de4x5_setup_intr(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - s32 imr, sts; - - if (inl(DE4X5_OMR) & OMR_SR) { /* Only unmask if TX/RX is enabled */ - imr = 0; - UNMASK_IRQs; - sts = inl(DE4X5_STS); /* Reset any pending (stale) interrupts */ - outl(sts, DE4X5_STS); - ENABLE_IRQs; - } -} - -/* -** -*/ -static void -reset_init_sia(struct net_device *dev, s32 csr13, s32 csr14, s32 csr15) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - - RESET_SIA; - if (lp->useSROM) { - if (lp->ibn == 3) { - srom_exec(dev, lp->phy[lp->active].rst); - srom_exec(dev, lp->phy[lp->active].gep); - outl(1, DE4X5_SICR); - return; - } else { - csr15 = lp->cache.csr15; - csr14 = lp->cache.csr14; - csr13 = lp->cache.csr13; - outl(csr15 | lp->cache.gepc, DE4X5_SIGR); - outl(csr15 | lp->cache.gep, DE4X5_SIGR); - } - } else { - outl(csr15, DE4X5_SIGR); - } - outl(csr14, DE4X5_STRR); - outl(csr13, DE4X5_SICR); - - mdelay(10); -} - -/* -** Create a loopback ethernet packet -*/ -static void -create_packet(struct net_device *dev, char *frame, int len) -{ - int i; - char *buf = frame; - - for (i=0; i<ETH_ALEN; i++) { /* Use this source address */ - *buf++ = dev->dev_addr[i]; - } - for (i=0; i<ETH_ALEN; i++) { /* Use this destination address */ - *buf++ = dev->dev_addr[i]; - } - - *buf++ = 0; /* Packet length (2 bytes) */ - *buf++ = 1; -} - -/* -** Look for a particular board name in the EISA configuration space -*/ -static int -EISA_signature(char *name, struct device *device) -{ - int i, status = 0, siglen = ARRAY_SIZE(de4x5_signatures); - struct eisa_device *edev; - - *name = '\0'; - edev = to_eisa_device (device); - i = edev->id.driver_data; - - if (i >= 0 && i < siglen) { - strcpy (name, de4x5_signatures[i]); - status = 1; - } - - return status; /* return the device name string */ -} - -/* -** Look for a particular board name in the PCI configuration space -*/ -static int -PCI_signature(char *name, struct de4x5_private *lp) -{ - int i, status = 0, siglen = ARRAY_SIZE(de4x5_signatures); - - if (lp->chipset == DC21040) { - strcpy(name, "DE434/5"); - return status; - } else { /* Search for a DEC name in the SROM */ - int tmp = *((char *)&lp->srom + 19) * 3; - strncpy(name, (char *)&lp->srom + 26 + tmp, 8); - } - name[8] = '\0'; - for (i=0; i<siglen; i++) { - if (strstr(name,de4x5_signatures[i])!=NULL) break; - } - if (i == siglen) { - if (dec_only) { - *name = '\0'; - } else { /* Use chip name to avoid confusion */ - strcpy(name, (((lp->chipset == DC21040) ? "DC21040" : - ((lp->chipset == DC21041) ? "DC21041" : - ((lp->chipset == DC21140) ? "DC21140" : - ((lp->chipset == DC21142) ? "DC21142" : - ((lp->chipset == DC21143) ? "DC21143" : "UNKNOWN" - ))))))); - } - if (lp->chipset != DC21041) { - lp->useSROM = true; /* card is not recognisably DEC */ - } - } else if ((lp->chipset & ~0x00ff) == DC2114x) { - lp->useSROM = true; - } - - return status; -} - -/* -** Set up the Ethernet PROM counter to the start of the Ethernet address on -** the DC21040, else read the SROM for the other chips. -** The SROM may not be present in a multi-MAC card, so first read the -** MAC address and check for a bad address. If there is a bad one then exit -** immediately with the prior srom contents intact (the h/w address will -** be fixed up later). -*/ -static void -DevicePresent(struct net_device *dev, u_long aprom_addr) -{ - int i, j=0; - struct de4x5_private *lp = netdev_priv(dev); - - if (lp->chipset == DC21040) { - if (lp->bus == EISA) { - enet_addr_rst(aprom_addr); /* Reset Ethernet Address ROM Pointer */ - } else { - outl(0, aprom_addr); /* Reset Ethernet Address ROM Pointer */ - } - } else { /* Read new srom */ - u_short tmp; - __le16 *p = (__le16 *)((char *)&lp->srom + SROM_HWADD); - for (i=0; i<(ETH_ALEN>>1); i++) { - tmp = srom_rd(aprom_addr, (SROM_HWADD>>1) + i); - j += tmp; /* for check for 0:0:0:0:0:0 or ff:ff:ff:ff:ff:ff */ - *p = cpu_to_le16(tmp); - } - if (j == 0 || j == 3 * 0xffff) { - /* could get 0 only from all-0 and 3 * 0xffff only from all-1 */ - return; - } - - p = (__le16 *)&lp->srom; - for (i=0; i<(sizeof(struct de4x5_srom)>>1); i++) { - tmp = srom_rd(aprom_addr, i); - *p++ = cpu_to_le16(tmp); - } - de4x5_dbg_srom((struct de4x5_srom *)&lp->srom); - } -} - -/* -** Since the write on the Enet PROM register doesn't seem to reset the PROM -** pointer correctly (at least on my DE425 EISA card), this routine should do -** it...from depca.c. -*/ -static void -enet_addr_rst(u_long aprom_addr) -{ - union { - struct { - u32 a; - u32 b; - } llsig; - char Sig[sizeof(u32) << 1]; - } dev; - short sigLength=0; - s8 data; - int i, j; - - dev.llsig.a = ETH_PROM_SIG; - dev.llsig.b = ETH_PROM_SIG; - sigLength = sizeof(u32) << 1; - - for (i=0,j=0;j<sigLength && i<PROBE_LENGTH+sigLength-1;i++) { - data = inb(aprom_addr); - if (dev.Sig[j] == data) { /* track signature */ - j++; - } else { /* lost signature; begin search again */ - if (data == dev.Sig[0]) { /* rare case.... */ - j=1; - } else { - j=0; - } - } - } -} - -/* -** For the bad status case and no SROM, then add one to the previous -** address. However, need to add one backwards in case we have 0xff -** as one or more of the bytes. Only the last 3 bytes should be checked -** as the first three are invariant - assigned to an organisation. -*/ -static int -get_hw_addr(struct net_device *dev) -{ - u_long iobase = dev->base_addr; - int broken, i, k, tmp, status = 0; - u_short j,chksum; - struct de4x5_private *lp = netdev_priv(dev); - - broken = de4x5_bad_srom(lp); - - for (i=0,k=0,j=0;j<3;j++) { - k <<= 1; - if (k > 0xffff) k-=0xffff; - - if (lp->bus == PCI) { - if (lp->chipset == DC21040) { - while ((tmp = inl(DE4X5_APROM)) < 0); - k += (u_char) tmp; - dev->dev_addr[i++] = (u_char) tmp; - while ((tmp = inl(DE4X5_APROM)) < 0); - k += (u_short) (tmp << 8); - dev->dev_addr[i++] = (u_char) tmp; - } else if (!broken) { - dev->dev_addr[i] = (u_char) lp->srom.ieee_addr[i]; i++; - dev->dev_addr[i] = (u_char) lp->srom.ieee_addr[i]; i++; - } else if ((broken == SMC) || (broken == ACCTON)) { - dev->dev_addr[i] = *((u_char *)&lp->srom + i); i++; - dev->dev_addr[i] = *((u_char *)&lp->srom + i); i++; - } - } else { - k += (u_char) (tmp = inb(EISA_APROM)); - dev->dev_addr[i++] = (u_char) tmp; - k += (u_short) ((tmp = inb(EISA_APROM)) << 8); - dev->dev_addr[i++] = (u_char) tmp; - } - - if (k > 0xffff) k-=0xffff; - } - if (k == 0xffff) k=0; - - if (lp->bus == PCI) { - if (lp->chipset == DC21040) { - while ((tmp = inl(DE4X5_APROM)) < 0); - chksum = (u_char) tmp; - while ((tmp = inl(DE4X5_APROM)) < 0); - chksum |= (u_short) (tmp << 8); - if ((k != chksum) && (dec_only)) status = -1; - } - } else { - chksum = (u_char) inb(EISA_APROM); - chksum |= (u_short) (inb(EISA_APROM) << 8); - if ((k != chksum) && (dec_only)) status = -1; - } - - /* If possible, try to fix a broken card - SMC only so far */ - srom_repair(dev, broken); - -#ifdef CONFIG_PPC_PMAC - /* - ** If the address starts with 00 a0, we have to bit-reverse - ** each byte of the address. - */ - if ( machine_is(powermac) && - (dev->dev_addr[0] == 0) && - (dev->dev_addr[1] == 0xa0) ) - { - for (i = 0; i < ETH_ALEN; ++i) - { - int x = dev->dev_addr[i]; - x = ((x & 0xf) << 4) + ((x & 0xf0) >> 4); - x = ((x & 0x33) << 2) + ((x & 0xcc) >> 2); - dev->dev_addr[i] = ((x & 0x55) << 1) + ((x & 0xaa) >> 1); - } - } -#endif /* CONFIG_PPC_PMAC */ - - /* Test for a bad enet address */ - status = test_bad_enet(dev, status); - - return status; -} - -/* -** Test for enet addresses in the first 32 bytes. The built-in strncmp -** didn't seem to work here...? -*/ -static int -de4x5_bad_srom(struct de4x5_private *lp) -{ - int i, status = 0; - - for (i = 0; i < ARRAY_SIZE(enet_det); i++) { - if (!de4x5_strncmp((char *)&lp->srom, (char *)&enet_det[i], 3) && - !de4x5_strncmp((char *)&lp->srom+0x10, (char *)&enet_det[i], 3)) { - if (i == 0) { - status = SMC; - } else if (i == 1) { - status = ACCTON; - } - break; - } - } - - return status; -} - -static int -de4x5_strncmp(char *a, char *b, int n) -{ - int ret=0; - - for (;n && !ret; n--) { - ret = *a++ - *b++; - } - - return ret; -} - -static void -srom_repair(struct net_device *dev, int card) -{ - struct de4x5_private *lp = netdev_priv(dev); - - switch(card) { - case SMC: - memset((char *)&lp->srom, 0, sizeof(struct de4x5_srom)); - memcpy(lp->srom.ieee_addr, (char *)dev->dev_addr, ETH_ALEN); - memcpy(lp->srom.info, (char *)&srom_repair_info[SMC-1], 100); - lp->useSROM = true; - break; - } -} - -/* -** Assume that the irq's do not follow the PCI spec - this is seems -** to be true so far (2 for 2). -*/ -static int -test_bad_enet(struct net_device *dev, int status) -{ - struct de4x5_private *lp = netdev_priv(dev); - int i, tmp; - - for (tmp=0,i=0; i<ETH_ALEN; i++) tmp += (u_char)dev->dev_addr[i]; - if ((tmp == 0) || (tmp == 0x5fa)) { - if ((lp->chipset == last.chipset) && - (lp->bus_num == last.bus) && (lp->bus_num > 0)) { - for (i=0; i<ETH_ALEN; i++) dev->dev_addr[i] = last.addr[i]; - for (i=ETH_ALEN-1; i>2; --i) { - dev->dev_addr[i] += 1; - if (dev->dev_addr[i] != 0) break; - } - for (i=0; i<ETH_ALEN; i++) last.addr[i] = dev->dev_addr[i]; - if (!an_exception(lp)) { - dev->irq = last.irq; - } - - status = 0; - } - } else if (!status) { - last.chipset = lp->chipset; - last.bus = lp->bus_num; - last.irq = dev->irq; - for (i=0; i<ETH_ALEN; i++) last.addr[i] = dev->dev_addr[i]; - } - - return status; -} - -/* -** List of board exceptions with correctly wired IRQs -*/ -static int -an_exception(struct de4x5_private *lp) -{ - if ((*(u_short *)lp->srom.sub_vendor_id == 0x00c0) && - (*(u_short *)lp->srom.sub_system_id == 0x95e0)) { - return -1; - } - - return 0; -} - -/* -** SROM Read -*/ -static short -srom_rd(u_long addr, u_char offset) -{ - sendto_srom(SROM_RD | SROM_SR, addr); - - srom_latch(SROM_RD | SROM_SR | DT_CS, addr); - srom_command(SROM_RD | SROM_SR | DT_IN | DT_CS, addr); - srom_address(SROM_RD | SROM_SR | DT_CS, addr, offset); - - return srom_data(SROM_RD | SROM_SR | DT_CS, addr); -} - -static void -srom_latch(u_int command, u_long addr) -{ - sendto_srom(command, addr); - sendto_srom(command | DT_CLK, addr); - sendto_srom(command, addr); -} - -static void -srom_command(u_int command, u_long addr) -{ - srom_latch(command, addr); - srom_latch(command, addr); - srom_latch((command & 0x0000ff00) | DT_CS, addr); -} - -static void -srom_address(u_int command, u_long addr, u_char offset) -{ - int i, a; - - a = offset << 2; - for (i=0; i<6; i++, a <<= 1) { - srom_latch(command | ((a & 0x80) ? DT_IN : 0), addr); - } - udelay(1); - - i = (getfrom_srom(addr) >> 3) & 0x01; -} - -static short -srom_data(u_int command, u_long addr) -{ - int i; - short word = 0; - s32 tmp; - - for (i=0; i<16; i++) { - sendto_srom(command | DT_CLK, addr); - tmp = getfrom_srom(addr); - sendto_srom(command, addr); - - word = (word << 1) | ((tmp >> 3) & 0x01); - } - - sendto_srom(command & 0x0000ff00, addr); - - return word; -} - -/* -static void -srom_busy(u_int command, u_long addr) -{ - sendto_srom((command & 0x0000ff00) | DT_CS, addr); - - while (!((getfrom_srom(addr) >> 3) & 0x01)) { - mdelay(1); - } - - sendto_srom(command & 0x0000ff00, addr); -} -*/ - -static void -sendto_srom(u_int command, u_long addr) -{ - outl(command, addr); - udelay(1); -} - -static int -getfrom_srom(u_long addr) -{ - s32 tmp; - - tmp = inl(addr); - udelay(1); - - return tmp; -} - -static int -srom_infoleaf_info(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - int i, count; - u_char *p; - - /* Find the infoleaf decoder function that matches this chipset */ - for (i=0; i<INFOLEAF_SIZE; i++) { - if (lp->chipset == infoleaf_array[i].chipset) break; - } - if (i == INFOLEAF_SIZE) { - lp->useSROM = false; - printk("%s: Cannot find correct chipset for SROM decoding!\n", - dev->name); - return -ENXIO; - } - - lp->infoleaf_fn = infoleaf_array[i].fn; - - /* Find the information offset that this function should use */ - count = *((u_char *)&lp->srom + 19); - p = (u_char *)&lp->srom + 26; - - if (count > 1) { - for (i=count; i; --i, p+=3) { - if (lp->device == *p) break; - } - if (i == 0) { - lp->useSROM = false; - printk("%s: Cannot find correct PCI device [%d] for SROM decoding!\n", - dev->name, lp->device); - return -ENXIO; - } - } - - lp->infoleaf_offset = get_unaligned_le16(p + 1); - - return 0; -} - -/* -** This routine loads any type 1 or 3 MII info into the mii device -** struct and executes any type 5 code to reset PHY devices for this -** controller. -** The info for the MII devices will be valid since the index used -** will follow the discovery process from MII address 1-31 then 0. -*/ -static void -srom_init(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset; - u_char count; - - p+=2; - if (lp->chipset == DC21140) { - lp->cache.gepc = (*p++ | GEP_CTRL); - gep_wr(lp->cache.gepc, dev); - } - - /* Block count */ - count = *p++; - - /* Jump the infoblocks to find types */ - for (;count; --count) { - if (*p < 128) { - p += COMPACT_LEN; - } else if (*(p+1) == 5) { - type5_infoblock(dev, 1, p); - p += ((*p & BLOCK_LEN) + 1); - } else if (*(p+1) == 4) { - p += ((*p & BLOCK_LEN) + 1); - } else if (*(p+1) == 3) { - type3_infoblock(dev, 1, p); - p += ((*p & BLOCK_LEN) + 1); - } else if (*(p+1) == 2) { - p += ((*p & BLOCK_LEN) + 1); - } else if (*(p+1) == 1) { - type1_infoblock(dev, 1, p); - p += ((*p & BLOCK_LEN) + 1); - } else { - p += ((*p & BLOCK_LEN) + 1); - } - } -} - -/* -** A generic routine that writes GEP control, data and reset information -** to the GEP register (21140) or csr15 GEP portion (2114[23]). -*/ -static void -srom_exec(struct net_device *dev, u_char *p) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - u_char count = (p ? *p++ : 0); - u_short *w = (u_short *)p; - - if (((lp->ibn != 1) && (lp->ibn != 3) && (lp->ibn != 5)) || !count) return; - - if (lp->chipset != DC21140) RESET_SIA; - - while (count--) { - gep_wr(((lp->chipset==DC21140) && (lp->ibn!=5) ? - *p++ : get_unaligned_le16(w++)), dev); - mdelay(2); /* 2ms per action */ - } - - if (lp->chipset != DC21140) { - outl(lp->cache.csr14, DE4X5_STRR); - outl(lp->cache.csr13, DE4X5_SICR); - } -} - -/* -** Basically this function is a NOP since it will never be called, -** unless I implement the DC21041 SROM functions. There's no need -** since the existing code will be satisfactory for all boards. -*/ -static int -dc21041_infoleaf(struct net_device *dev) -{ - return DE4X5_AUTOSENSE_MS; -} - -static int -dc21140_infoleaf(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_char count = 0; - u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset; - int next_tick = DE4X5_AUTOSENSE_MS; - - /* Read the connection type */ - p+=2; - - /* GEP control */ - lp->cache.gepc = (*p++ | GEP_CTRL); - - /* Block count */ - count = *p++; - - /* Recursively figure out the info blocks */ - if (*p < 128) { - next_tick = dc_infoblock[COMPACT](dev, count, p); - } else { - next_tick = dc_infoblock[*(p+1)](dev, count, p); - } - - if (lp->tcount == count) { - lp->media = NC; - if (lp->media != lp->c_media) { - de4x5_dbg_media(dev); - lp->c_media = lp->media; - } - lp->media = INIT; - lp->tcount = 0; - lp->tx_enable = false; - } - - return next_tick & ~TIMER_CB; -} - -static int -dc21142_infoleaf(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_char count = 0; - u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset; - int next_tick = DE4X5_AUTOSENSE_MS; - - /* Read the connection type */ - p+=2; - - /* Block count */ - count = *p++; - - /* Recursively figure out the info blocks */ - if (*p < 128) { - next_tick = dc_infoblock[COMPACT](dev, count, p); - } else { - next_tick = dc_infoblock[*(p+1)](dev, count, p); - } - - if (lp->tcount == count) { - lp->media = NC; - if (lp->media != lp->c_media) { - de4x5_dbg_media(dev); - lp->c_media = lp->media; - } - lp->media = INIT; - lp->tcount = 0; - lp->tx_enable = false; - } - - return next_tick & ~TIMER_CB; -} - -static int -dc21143_infoleaf(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_char count = 0; - u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset; - int next_tick = DE4X5_AUTOSENSE_MS; - - /* Read the connection type */ - p+=2; - - /* Block count */ - count = *p++; - - /* Recursively figure out the info blocks */ - if (*p < 128) { - next_tick = dc_infoblock[COMPACT](dev, count, p); - } else { - next_tick = dc_infoblock[*(p+1)](dev, count, p); - } - if (lp->tcount == count) { - lp->media = NC; - if (lp->media != lp->c_media) { - de4x5_dbg_media(dev); - lp->c_media = lp->media; - } - lp->media = INIT; - lp->tcount = 0; - lp->tx_enable = false; - } - - return next_tick & ~TIMER_CB; -} - -/* -** The compact infoblock is only designed for DC21140[A] chips, so -** we'll reuse the dc21140m_autoconf function. Non MII media only. -*/ -static int -compact_infoblock(struct net_device *dev, u_char count, u_char *p) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_char flags, csr6; - - /* Recursively figure out the info blocks */ - if (--count > lp->tcount) { - if (*(p+COMPACT_LEN) < 128) { - return dc_infoblock[COMPACT](dev, count, p+COMPACT_LEN); - } else { - return dc_infoblock[*(p+COMPACT_LEN+1)](dev, count, p+COMPACT_LEN); - } - } - - if ((lp->media == INIT) && (lp->timeout < 0)) { - lp->ibn = COMPACT; - lp->active = 0; - gep_wr(lp->cache.gepc, dev); - lp->infoblock_media = (*p++) & COMPACT_MC; - lp->cache.gep = *p++; - csr6 = *p++; - flags = *p++; - - lp->asBitValid = (flags & 0x80) ? 0 : -1; - lp->defMedium = (flags & 0x40) ? -1 : 0; - lp->asBit = 1 << ((csr6 >> 1) & 0x07); - lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit; - lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18); - lp->useMII = false; - - de4x5_switch_mac_port(dev); - } - - return dc21140m_autoconf(dev); -} - -/* -** This block describes non MII media for the DC21140[A] only. -*/ -static int -type0_infoblock(struct net_device *dev, u_char count, u_char *p) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_char flags, csr6, len = (*p & BLOCK_LEN)+1; - - /* Recursively figure out the info blocks */ - if (--count > lp->tcount) { - if (*(p+len) < 128) { - return dc_infoblock[COMPACT](dev, count, p+len); - } else { - return dc_infoblock[*(p+len+1)](dev, count, p+len); - } - } - - if ((lp->media == INIT) && (lp->timeout < 0)) { - lp->ibn = 0; - lp->active = 0; - gep_wr(lp->cache.gepc, dev); - p+=2; - lp->infoblock_media = (*p++) & BLOCK0_MC; - lp->cache.gep = *p++; - csr6 = *p++; - flags = *p++; - - lp->asBitValid = (flags & 0x80) ? 0 : -1; - lp->defMedium = (flags & 0x40) ? -1 : 0; - lp->asBit = 1 << ((csr6 >> 1) & 0x07); - lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit; - lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18); - lp->useMII = false; - - de4x5_switch_mac_port(dev); - } - - return dc21140m_autoconf(dev); -} - -/* These functions are under construction! */ - -static int -type1_infoblock(struct net_device *dev, u_char count, u_char *p) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_char len = (*p & BLOCK_LEN)+1; - - /* Recursively figure out the info blocks */ - if (--count > lp->tcount) { - if (*(p+len) < 128) { - return dc_infoblock[COMPACT](dev, count, p+len); - } else { - return dc_infoblock[*(p+len+1)](dev, count, p+len); - } - } - - p += 2; - if (lp->state == INITIALISED) { - lp->ibn = 1; - lp->active = *p++; - lp->phy[lp->active].gep = (*p ? p : NULL); p += (*p + 1); - lp->phy[lp->active].rst = (*p ? p : NULL); p += (*p + 1); - lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2; - lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2; - lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2; - lp->phy[lp->active].ttm = get_unaligned_le16(p); - return 0; - } else if ((lp->media == INIT) && (lp->timeout < 0)) { - lp->ibn = 1; - lp->active = *p; - lp->infoblock_csr6 = OMR_MII_100; - lp->useMII = true; - lp->infoblock_media = ANS; - - de4x5_switch_mac_port(dev); - } - - return dc21140m_autoconf(dev); -} - -static int -type2_infoblock(struct net_device *dev, u_char count, u_char *p) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_char len = (*p & BLOCK_LEN)+1; - - /* Recursively figure out the info blocks */ - if (--count > lp->tcount) { - if (*(p+len) < 128) { - return dc_infoblock[COMPACT](dev, count, p+len); - } else { - return dc_infoblock[*(p+len+1)](dev, count, p+len); - } - } - - if ((lp->media == INIT) && (lp->timeout < 0)) { - lp->ibn = 2; - lp->active = 0; - p += 2; - lp->infoblock_media = (*p) & MEDIA_CODE; - - if ((*p++) & EXT_FIELD) { - lp->cache.csr13 = get_unaligned_le16(p); p += 2; - lp->cache.csr14 = get_unaligned_le16(p); p += 2; - lp->cache.csr15 = get_unaligned_le16(p); p += 2; - } else { - lp->cache.csr13 = CSR13; - lp->cache.csr14 = CSR14; - lp->cache.csr15 = CSR15; - } - lp->cache.gepc = ((s32)(get_unaligned_le16(p)) << 16); p += 2; - lp->cache.gep = ((s32)(get_unaligned_le16(p)) << 16); - lp->infoblock_csr6 = OMR_SIA; - lp->useMII = false; - - de4x5_switch_mac_port(dev); - } - - return dc2114x_autoconf(dev); -} - -static int -type3_infoblock(struct net_device *dev, u_char count, u_char *p) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_char len = (*p & BLOCK_LEN)+1; - - /* Recursively figure out the info blocks */ - if (--count > lp->tcount) { - if (*(p+len) < 128) { - return dc_infoblock[COMPACT](dev, count, p+len); - } else { - return dc_infoblock[*(p+len+1)](dev, count, p+len); - } - } - - p += 2; - if (lp->state == INITIALISED) { - lp->ibn = 3; - lp->active = *p++; - if (MOTO_SROM_BUG) lp->active = 0; - lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1); - lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1); - lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2; - lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2; - lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2; - lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2; - lp->phy[lp->active].mci = *p; - return 0; - } else if ((lp->media == INIT) && (lp->timeout < 0)) { - lp->ibn = 3; - lp->active = *p; - if (MOTO_SROM_BUG) lp->active = 0; - lp->infoblock_csr6 = OMR_MII_100; - lp->useMII = true; - lp->infoblock_media = ANS; - - de4x5_switch_mac_port(dev); - } - - return dc2114x_autoconf(dev); -} - -static int -type4_infoblock(struct net_device *dev, u_char count, u_char *p) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_char flags, csr6, len = (*p & BLOCK_LEN)+1; - - /* Recursively figure out the info blocks */ - if (--count > lp->tcount) { - if (*(p+len) < 128) { - return dc_infoblock[COMPACT](dev, count, p+len); - } else { - return dc_infoblock[*(p+len+1)](dev, count, p+len); - } - } - - if ((lp->media == INIT) && (lp->timeout < 0)) { - lp->ibn = 4; - lp->active = 0; - p+=2; - lp->infoblock_media = (*p++) & MEDIA_CODE; - lp->cache.csr13 = CSR13; /* Hard coded defaults */ - lp->cache.csr14 = CSR14; - lp->cache.csr15 = CSR15; - lp->cache.gepc = ((s32)(get_unaligned_le16(p)) << 16); p += 2; - lp->cache.gep = ((s32)(get_unaligned_le16(p)) << 16); p += 2; - csr6 = *p++; - flags = *p++; - - lp->asBitValid = (flags & 0x80) ? 0 : -1; - lp->defMedium = (flags & 0x40) ? -1 : 0; - lp->asBit = 1 << ((csr6 >> 1) & 0x07); - lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit; - lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18); - lp->useMII = false; - - de4x5_switch_mac_port(dev); - } - - return dc2114x_autoconf(dev); -} - -/* -** This block type provides information for resetting external devices -** (chips) through the General Purpose Register. -*/ -static int -type5_infoblock(struct net_device *dev, u_char count, u_char *p) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_char len = (*p & BLOCK_LEN)+1; - - /* Recursively figure out the info blocks */ - if (--count > lp->tcount) { - if (*(p+len) < 128) { - return dc_infoblock[COMPACT](dev, count, p+len); - } else { - return dc_infoblock[*(p+len+1)](dev, count, p+len); - } - } - - /* Must be initializing to run this code */ - if ((lp->state == INITIALISED) || (lp->media == INIT)) { - p+=2; - lp->rst = p; - srom_exec(dev, lp->rst); - } - - return DE4X5_AUTOSENSE_MS; -} - -/* -** MII Read/Write -*/ - -static int -mii_rd(u_char phyreg, u_char phyaddr, u_long ioaddr) -{ - mii_wdata(MII_PREAMBLE, 2, ioaddr); /* Start of 34 bit preamble... */ - mii_wdata(MII_PREAMBLE, 32, ioaddr); /* ...continued */ - mii_wdata(MII_STRD, 4, ioaddr); /* SFD and Read operation */ - mii_address(phyaddr, ioaddr); /* PHY address to be accessed */ - mii_address(phyreg, ioaddr); /* PHY Register to read */ - mii_ta(MII_STRD, ioaddr); /* Turn around time - 2 MDC */ - - return mii_rdata(ioaddr); /* Read data */ -} - -static void -mii_wr(int data, u_char phyreg, u_char phyaddr, u_long ioaddr) -{ - mii_wdata(MII_PREAMBLE, 2, ioaddr); /* Start of 34 bit preamble... */ - mii_wdata(MII_PREAMBLE, 32, ioaddr); /* ...continued */ - mii_wdata(MII_STWR, 4, ioaddr); /* SFD and Write operation */ - mii_address(phyaddr, ioaddr); /* PHY address to be accessed */ - mii_address(phyreg, ioaddr); /* PHY Register to write */ - mii_ta(MII_STWR, ioaddr); /* Turn around time - 2 MDC */ - data = mii_swap(data, 16); /* Swap data bit ordering */ - mii_wdata(data, 16, ioaddr); /* Write data */ -} - -static int -mii_rdata(u_long ioaddr) -{ - int i; - s32 tmp = 0; - - for (i=0; i<16; i++) { - tmp <<= 1; - tmp |= getfrom_mii(MII_MRD | MII_RD, ioaddr); - } - - return tmp; -} - -static void -mii_wdata(int data, int len, u_long ioaddr) -{ - int i; - - for (i=0; i<len; i++) { - sendto_mii(MII_MWR | MII_WR, data, ioaddr); - data >>= 1; - } -} - -static void -mii_address(u_char addr, u_long ioaddr) -{ - int i; - - addr = mii_swap(addr, 5); - for (i=0; i<5; i++) { - sendto_mii(MII_MWR | MII_WR, addr, ioaddr); - addr >>= 1; - } -} - -static void -mii_ta(u_long rw, u_long ioaddr) -{ - if (rw == MII_STWR) { - sendto_mii(MII_MWR | MII_WR, 1, ioaddr); - sendto_mii(MII_MWR | MII_WR, 0, ioaddr); - } else { - getfrom_mii(MII_MRD | MII_RD, ioaddr); /* Tri-state MDIO */ - } -} - -static int -mii_swap(int data, int len) -{ - int i, tmp = 0; - - for (i=0; i<len; i++) { - tmp <<= 1; - tmp |= (data & 1); - data >>= 1; - } - - return tmp; -} - -static void -sendto_mii(u32 command, int data, u_long ioaddr) -{ - u32 j; - - j = (data & 1) << 17; - outl(command | j, ioaddr); - udelay(1); - outl(command | MII_MDC | j, ioaddr); - udelay(1); -} - -static int -getfrom_mii(u32 command, u_long ioaddr) -{ - outl(command, ioaddr); - udelay(1); - outl(command | MII_MDC, ioaddr); - udelay(1); - - return (inl(ioaddr) >> 19) & 1; -} - -/* -** Here's 3 ways to calculate the OUI from the ID registers. -*/ -static int -mii_get_oui(u_char phyaddr, u_long ioaddr) -{ -/* - union { - u_short reg; - u_char breg[2]; - } a; - int i, r2, r3, ret=0;*/ - int r2, r3; - - /* Read r2 and r3 */ - r2 = mii_rd(MII_ID0, phyaddr, ioaddr); - r3 = mii_rd(MII_ID1, phyaddr, ioaddr); - /* SEEQ and Cypress way * / - / * Shuffle r2 and r3 * / - a.reg=0; - r3 = ((r3>>10)|(r2<<6))&0x0ff; - r2 = ((r2>>2)&0x3fff); - - / * Bit reverse r3 * / - for (i=0;i<8;i++) { - ret<<=1; - ret |= (r3&1); - r3>>=1; - } - - / * Bit reverse r2 * / - for (i=0;i<16;i++) { - a.reg<<=1; - a.reg |= (r2&1); - r2>>=1; - } - - / * Swap r2 bytes * / - i=a.breg[0]; - a.breg[0]=a.breg[1]; - a.breg[1]=i; - - return (a.reg<<8)|ret; */ /* SEEQ and Cypress way */ -/* return (r2<<6)|(u_int)(r3>>10); */ /* NATIONAL and BROADCOM way */ - return r2; /* (I did it) My way */ -} - -/* -** The SROM spec forces us to search addresses [1-31 0]. Bummer. -*/ -static int -mii_get_phy(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - int i, j, k, n, limit=ARRAY_SIZE(phy_info); - int id; - - lp->active = 0; - lp->useMII = true; - - /* Search the MII address space for possible PHY devices */ - for (n=0, lp->mii_cnt=0, i=1; !((i==1) && (n==1)); i=(i+1)%DE4X5_MAX_MII) { - lp->phy[lp->active].addr = i; - if (i==0) n++; /* Count cycles */ - while (de4x5_reset_phy(dev)<0) udelay(100);/* Wait for reset */ - id = mii_get_oui(i, DE4X5_MII); - if ((id == 0) || (id == 65535)) continue; /* Valid ID? */ - for (j=0; j<limit; j++) { /* Search PHY table */ - if (id != phy_info[j].id) continue; /* ID match? */ - for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++); - if (k < DE4X5_MAX_PHY) { - memcpy((char *)&lp->phy[k], - (char *)&phy_info[j], sizeof(struct phy_table)); - lp->phy[k].addr = i; - lp->mii_cnt++; - lp->active++; - } else { - goto purgatory; /* Stop the search */ - } - break; - } - if ((j == limit) && (i < DE4X5_MAX_MII)) { - for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++); - lp->phy[k].addr = i; - lp->phy[k].id = id; - lp->phy[k].spd.reg = GENERIC_REG; /* ANLPA register */ - lp->phy[k].spd.mask = GENERIC_MASK; /* 100Mb/s technologies */ - lp->phy[k].spd.value = GENERIC_VALUE; /* TX & T4, H/F Duplex */ - lp->mii_cnt++; - lp->active++; - printk("%s: Using generic MII device control. If the board doesn't operate,\nplease mail the following dump to the author:\n", dev->name); - j = de4x5_debug; - de4x5_debug |= DEBUG_MII; - de4x5_dbg_mii(dev, k); - de4x5_debug = j; - printk("\n"); - } - } - purgatory: - lp->active = 0; - if (lp->phy[0].id) { /* Reset the PHY devices */ - for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++) { /*For each PHY*/ - mii_wr(MII_CR_RST, MII_CR, lp->phy[k].addr, DE4X5_MII); - while (mii_rd(MII_CR, lp->phy[k].addr, DE4X5_MII) & MII_CR_RST); - - de4x5_dbg_mii(dev, k); - } - } - if (!lp->mii_cnt) lp->useMII = false; - - return lp->mii_cnt; -} - -static char * -build_setup_frame(struct net_device *dev, int mode) -{ - struct de4x5_private *lp = netdev_priv(dev); - int i; - char *pa = lp->setup_frame; - - /* Initialise the setup frame */ - if (mode == ALL) { - memset(lp->setup_frame, 0, SETUP_FRAME_LEN); - } - - if (lp->setup_f == HASH_PERF) { - for (pa=lp->setup_frame+IMPERF_PA_OFFSET, i=0; i<ETH_ALEN; i++) { - *(pa + i) = dev->dev_addr[i]; /* Host address */ - if (i & 0x01) pa += 2; - } - *(lp->setup_frame + (HASH_TABLE_LEN >> 3) - 3) = 0x80; - } else { - for (i=0; i<ETH_ALEN; i++) { /* Host address */ - *(pa + (i&1)) = dev->dev_addr[i]; - if (i & 0x01) pa += 4; - } - for (i=0; i<ETH_ALEN; i++) { /* Broadcast address */ - *(pa + (i&1)) = (char) 0xff; - if (i & 0x01) pa += 4; - } - } - - return pa; /* Points to the next entry */ -} - -static void -disable_ast(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - del_timer_sync(&lp->timer); -} - -static long -de4x5_switch_mac_port(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - s32 omr; - - STOP_DE4X5; - - /* Assert the OMR_PS bit in CSR6 */ - omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | - OMR_FDX)); - omr |= lp->infoblock_csr6; - if (omr & OMR_PS) omr |= OMR_HBD; - outl(omr, DE4X5_OMR); - - /* Soft Reset */ - RESET_DE4X5; - - /* Restore the GEP - especially for COMPACT and Type 0 Infoblocks */ - if (lp->chipset == DC21140) { - gep_wr(lp->cache.gepc, dev); - gep_wr(lp->cache.gep, dev); - } else if ((lp->chipset & ~0x0ff) == DC2114x) { - reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14, lp->cache.csr15); - } - - /* Restore CSR6 */ - outl(omr, DE4X5_OMR); - - /* Reset CSR8 */ - inl(DE4X5_MFC); - - return omr; -} - -static void -gep_wr(s32 data, struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - - if (lp->chipset == DC21140) { - outl(data, DE4X5_GEP); - } else if ((lp->chipset & ~0x00ff) == DC2114x) { - outl((data<<16) | lp->cache.csr15, DE4X5_SIGR); - } -} - -static int -gep_rd(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - - if (lp->chipset == DC21140) { - return inl(DE4X5_GEP); - } else if ((lp->chipset & ~0x00ff) == DC2114x) { - return inl(DE4X5_SIGR) & 0x000fffff; - } - - return 0; -} - -static void -yawn(struct net_device *dev, int state) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - - if ((lp->chipset == DC21040) || (lp->chipset == DC21140)) return; - - if(lp->bus == EISA) { - switch(state) { - case WAKEUP: - outb(WAKEUP, PCI_CFPM); - mdelay(10); - break; - - case SNOOZE: - outb(SNOOZE, PCI_CFPM); - break; - - case SLEEP: - outl(0, DE4X5_SICR); - outb(SLEEP, PCI_CFPM); - break; - } - } else { - struct pci_dev *pdev = to_pci_dev (lp->gendev); - switch(state) { - case WAKEUP: - pci_write_config_byte(pdev, PCI_CFDA_PSM, WAKEUP); - mdelay(10); - break; - - case SNOOZE: - pci_write_config_byte(pdev, PCI_CFDA_PSM, SNOOZE); - break; - - case SLEEP: - outl(0, DE4X5_SICR); - pci_write_config_byte(pdev, PCI_CFDA_PSM, SLEEP); - break; - } - } -} - -static void -de4x5_parse_params(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - char *p, *q, t; - - lp->params.fdx = 0; - lp->params.autosense = AUTO; - - if (args == NULL) return; - - if ((p = strstr(args, dev->name))) { - if (!(q = strstr(p+strlen(dev->name), "eth"))) q = p + strlen(p); - t = *q; - *q = '\0'; - - if (strstr(p, "fdx") || strstr(p, "FDX")) lp->params.fdx = 1; - - if (strstr(p, "autosense") || strstr(p, "AUTOSENSE")) { - if (strstr(p, "TP")) { - lp->params.autosense = TP; - } else if (strstr(p, "TP_NW")) { - lp->params.autosense = TP_NW; - } else if (strstr(p, "BNC")) { - lp->params.autosense = BNC; - } else if (strstr(p, "AUI")) { - lp->params.autosense = AUI; - } else if (strstr(p, "BNC_AUI")) { - lp->params.autosense = BNC; - } else if (strstr(p, "10Mb")) { - lp->params.autosense = _10Mb; - } else if (strstr(p, "100Mb")) { - lp->params.autosense = _100Mb; - } else if (strstr(p, "AUTO")) { - lp->params.autosense = AUTO; - } - } - *q = t; - } -} - -static void -de4x5_dbg_open(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - int i; - - if (de4x5_debug & DEBUG_OPEN) { - printk("%s: de4x5 opening with irq %d\n",dev->name,dev->irq); - printk("\tphysical address: "); - for (i=0;i<6;i++) { - printk("%2.2x:",(short)dev->dev_addr[i]); - } - printk("\n"); - printk("Descriptor head addresses:\n"); - printk("\t0x%8.8lx 0x%8.8lx\n",(u_long)lp->rx_ring,(u_long)lp->tx_ring); - printk("Descriptor addresses:\nRX: "); - for (i=0;i<lp->rxRingSize-1;i++){ - if (i < 3) { - printk("0x%8.8lx ",(u_long)&lp->rx_ring[i].status); - } - } - printk("...0x%8.8lx\n",(u_long)&lp->rx_ring[i].status); - printk("TX: "); - for (i=0;i<lp->txRingSize-1;i++){ - if (i < 3) { - printk("0x%8.8lx ", (u_long)&lp->tx_ring[i].status); - } - } - printk("...0x%8.8lx\n", (u_long)&lp->tx_ring[i].status); - printk("Descriptor buffers:\nRX: "); - for (i=0;i<lp->rxRingSize-1;i++){ - if (i < 3) { - printk("0x%8.8x ",le32_to_cpu(lp->rx_ring[i].buf)); - } - } - printk("...0x%8.8x\n",le32_to_cpu(lp->rx_ring[i].buf)); - printk("TX: "); - for (i=0;i<lp->txRingSize-1;i++){ - if (i < 3) { - printk("0x%8.8x ", le32_to_cpu(lp->tx_ring[i].buf)); - } - } - printk("...0x%8.8x\n", le32_to_cpu(lp->tx_ring[i].buf)); - printk("Ring size:\nRX: %d\nTX: %d\n", - (short)lp->rxRingSize, - (short)lp->txRingSize); - } -} - -static void -de4x5_dbg_mii(struct net_device *dev, int k) -{ - struct de4x5_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - - if (de4x5_debug & DEBUG_MII) { - printk("\nMII device address: %d\n", lp->phy[k].addr); - printk("MII CR: %x\n",mii_rd(MII_CR,lp->phy[k].addr,DE4X5_MII)); - printk("MII SR: %x\n",mii_rd(MII_SR,lp->phy[k].addr,DE4X5_MII)); - printk("MII ID0: %x\n",mii_rd(MII_ID0,lp->phy[k].addr,DE4X5_MII)); - printk("MII ID1: %x\n",mii_rd(MII_ID1,lp->phy[k].addr,DE4X5_MII)); - if (lp->phy[k].id != BROADCOM_T4) { - printk("MII ANA: %x\n",mii_rd(0x04,lp->phy[k].addr,DE4X5_MII)); - printk("MII ANC: %x\n",mii_rd(0x05,lp->phy[k].addr,DE4X5_MII)); - } - printk("MII 16: %x\n",mii_rd(0x10,lp->phy[k].addr,DE4X5_MII)); - if (lp->phy[k].id != BROADCOM_T4) { - printk("MII 17: %x\n",mii_rd(0x11,lp->phy[k].addr,DE4X5_MII)); - printk("MII 18: %x\n",mii_rd(0x12,lp->phy[k].addr,DE4X5_MII)); - } else { - printk("MII 20: %x\n",mii_rd(0x14,lp->phy[k].addr,DE4X5_MII)); - } - } -} - -static void -de4x5_dbg_media(struct net_device *dev) -{ - struct de4x5_private *lp = netdev_priv(dev); - - if (lp->media != lp->c_media) { - if (de4x5_debug & DEBUG_MEDIA) { - printk("%s: media is %s%s\n", dev->name, - (lp->media == NC ? "unconnected, link down or incompatible connection" : - (lp->media == TP ? "TP" : - (lp->media == ANS ? "TP/Nway" : - (lp->media == BNC ? "BNC" : - (lp->media == AUI ? "AUI" : - (lp->media == BNC_AUI ? "BNC/AUI" : - (lp->media == EXT_SIA ? "EXT SIA" : - (lp->media == _100Mb ? "100Mb/s" : - (lp->media == _10Mb ? "10Mb/s" : - "???" - ))))))))), (lp->fdx?" full duplex.":".")); - } - lp->c_media = lp->media; - } -} - -static void -de4x5_dbg_srom(struct de4x5_srom *p) -{ - int i; - - if (de4x5_debug & DEBUG_SROM) { - printk("Sub-system Vendor ID: %04x\n", *((u_short *)p->sub_vendor_id)); - printk("Sub-system ID: %04x\n", *((u_short *)p->sub_system_id)); - printk("ID Block CRC: %02x\n", (u_char)(p->id_block_crc)); - printk("SROM version: %02x\n", (u_char)(p->version)); - printk("# controllers: %02x\n", (u_char)(p->num_controllers)); - - printk("Hardware Address: %pM\n", p->ieee_addr); - printk("CRC checksum: %04x\n", (u_short)(p->chksum)); - for (i=0; i<64; i++) { - printk("%3d %04x\n", i<<1, (u_short)*((u_short *)p+i)); - } - } -} - -static void -de4x5_dbg_rx(struct sk_buff *skb, int len) -{ - int i, j; - - if (de4x5_debug & DEBUG_RX) { - printk("R: %pM <- %pM len/SAP:%02x%02x [%d]\n", - skb->data, &skb->data[6], - (u_char)skb->data[12], - (u_char)skb->data[13], - len); - for (j=0; len>0;j+=16, len-=16) { - printk(" %03x: ",j); - for (i=0; i<16 && i<len; i++) { - printk("%02x ",(u_char)skb->data[i+j]); - } - printk("\n"); - } - } -} - -/* -** Perform IOCTL call functions here. Some are privileged operations and the -** effective uid is checked in those cases. In the normal course of events -** this function is only used for my testing. -*/ -static int -de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct de4x5_private *lp = netdev_priv(dev); - struct de4x5_ioctl *ioc = (struct de4x5_ioctl *) &rq->ifr_ifru; - u_long iobase = dev->base_addr; - int i, j, status = 0; - s32 omr; - union { - u8 addr[144]; - u16 sval[72]; - u32 lval[36]; - } tmp; - u_long flags = 0; - - switch(ioc->cmd) { - case DE4X5_GET_HWADDR: /* Get the hardware address */ - ioc->len = ETH_ALEN; - for (i=0; i<ETH_ALEN; i++) { - tmp.addr[i] = dev->dev_addr[i]; - } - if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT; - break; - - case DE4X5_SET_HWADDR: /* Set the hardware address */ - if (!capable(CAP_NET_ADMIN)) return -EPERM; - if (copy_from_user(tmp.addr, ioc->data, ETH_ALEN)) return -EFAULT; - if (netif_queue_stopped(dev)) - return -EBUSY; - netif_stop_queue(dev); - for (i=0; i<ETH_ALEN; i++) { - dev->dev_addr[i] = tmp.addr[i]; - } - build_setup_frame(dev, PHYS_ADDR_ONLY); - /* Set up the descriptor and give ownership to the card */ - load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET | - SETUP_FRAME_LEN, (struct sk_buff *)1); - lp->tx_new = (lp->tx_new + 1) % lp->txRingSize; - outl(POLL_DEMAND, DE4X5_TPD); /* Start the TX */ - netif_wake_queue(dev); /* Unlock the TX ring */ - break; - - case DE4X5_SAY_BOO: /* Say "Boo!" to the kernel log file */ - if (!capable(CAP_NET_ADMIN)) return -EPERM; - printk("%s: Boo!\n", dev->name); - break; - - case DE4X5_MCA_EN: /* Enable pass all multicast addressing */ - if (!capable(CAP_NET_ADMIN)) return -EPERM; - omr = inl(DE4X5_OMR); - omr |= OMR_PM; - outl(omr, DE4X5_OMR); - break; - - case DE4X5_GET_STATS: /* Get the driver statistics */ - { - struct pkt_stats statbuf; - ioc->len = sizeof(statbuf); - spin_lock_irqsave(&lp->lock, flags); - memcpy(&statbuf, &lp->pktStats, ioc->len); - spin_unlock_irqrestore(&lp->lock, flags); - if (copy_to_user(ioc->data, &statbuf, ioc->len)) - return -EFAULT; - break; - } - case DE4X5_CLR_STATS: /* Zero out the driver statistics */ - if (!capable(CAP_NET_ADMIN)) return -EPERM; - spin_lock_irqsave(&lp->lock, flags); - memset(&lp->pktStats, 0, sizeof(lp->pktStats)); - spin_unlock_irqrestore(&lp->lock, flags); - break; - - case DE4X5_GET_OMR: /* Get the OMR Register contents */ - tmp.addr[0] = inl(DE4X5_OMR); - if (copy_to_user(ioc->data, tmp.addr, 1)) return -EFAULT; - break; - - case DE4X5_SET_OMR: /* Set the OMR Register contents */ - if (!capable(CAP_NET_ADMIN)) return -EPERM; - if (copy_from_user(tmp.addr, ioc->data, 1)) return -EFAULT; - outl(tmp.addr[0], DE4X5_OMR); - break; - - case DE4X5_GET_REG: /* Get the DE4X5 Registers */ - j = 0; - tmp.lval[0] = inl(DE4X5_STS); j+=4; - tmp.lval[1] = inl(DE4X5_BMR); j+=4; - tmp.lval[2] = inl(DE4X5_IMR); j+=4; - tmp.lval[3] = inl(DE4X5_OMR); j+=4; - tmp.lval[4] = inl(DE4X5_SISR); j+=4; - tmp.lval[5] = inl(DE4X5_SICR); j+=4; - tmp.lval[6] = inl(DE4X5_STRR); j+=4; - tmp.lval[7] = inl(DE4X5_SIGR); j+=4; - ioc->len = j; - if (copy_to_user(ioc->data, tmp.lval, ioc->len)) - return -EFAULT; - break; - -#define DE4X5_DUMP 0x0f /* Dump the DE4X5 Status */ -/* - case DE4X5_DUMP: - j = 0; - tmp.addr[j++] = dev->irq; - for (i=0; i<ETH_ALEN; i++) { - tmp.addr[j++] = dev->dev_addr[i]; - } - tmp.addr[j++] = lp->rxRingSize; - tmp.lval[j>>2] = (long)lp->rx_ring; j+=4; - tmp.lval[j>>2] = (long)lp->tx_ring; j+=4; - - for (i=0;i<lp->rxRingSize-1;i++){ - if (i < 3) { - tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4; - } - } - tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4; - for (i=0;i<lp->txRingSize-1;i++){ - if (i < 3) { - tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4; - } - } - tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4; - - for (i=0;i<lp->rxRingSize-1;i++){ - if (i < 3) { - tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4; - } - } - tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4; - for (i=0;i<lp->txRingSize-1;i++){ - if (i < 3) { - tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4; - } - } - tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4; - - for (i=0;i<lp->rxRingSize;i++){ - tmp.lval[j>>2] = le32_to_cpu(lp->rx_ring[i].status); j+=4; - } - for (i=0;i<lp->txRingSize;i++){ - tmp.lval[j>>2] = le32_to_cpu(lp->tx_ring[i].status); j+=4; - } - - tmp.lval[j>>2] = inl(DE4X5_BMR); j+=4; - tmp.lval[j>>2] = inl(DE4X5_TPD); j+=4; - tmp.lval[j>>2] = inl(DE4X5_RPD); j+=4; - tmp.lval[j>>2] = inl(DE4X5_RRBA); j+=4; - tmp.lval[j>>2] = inl(DE4X5_TRBA); j+=4; - tmp.lval[j>>2] = inl(DE4X5_STS); j+=4; - tmp.lval[j>>2] = inl(DE4X5_OMR); j+=4; - tmp.lval[j>>2] = inl(DE4X5_IMR); j+=4; - tmp.lval[j>>2] = lp->chipset; j+=4; - if (lp->chipset == DC21140) { - tmp.lval[j>>2] = gep_rd(dev); j+=4; - } else { - tmp.lval[j>>2] = inl(DE4X5_SISR); j+=4; - tmp.lval[j>>2] = inl(DE4X5_SICR); j+=4; - tmp.lval[j>>2] = inl(DE4X5_STRR); j+=4; - tmp.lval[j>>2] = inl(DE4X5_SIGR); j+=4; - } - tmp.lval[j>>2] = lp->phy[lp->active].id; j+=4; - if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) { - tmp.lval[j>>2] = lp->active; j+=4; - tmp.lval[j>>2]=mii_rd(MII_CR,lp->phy[lp->active].addr,DE4X5_MII); j+=4; - tmp.lval[j>>2]=mii_rd(MII_SR,lp->phy[lp->active].addr,DE4X5_MII); j+=4; - tmp.lval[j>>2]=mii_rd(MII_ID0,lp->phy[lp->active].addr,DE4X5_MII); j+=4; - tmp.lval[j>>2]=mii_rd(MII_ID1,lp->phy[lp->active].addr,DE4X5_MII); j+=4; - if (lp->phy[lp->active].id != BROADCOM_T4) { - tmp.lval[j>>2]=mii_rd(MII_ANA,lp->phy[lp->active].addr,DE4X5_MII); j+=4; - tmp.lval[j>>2]=mii_rd(MII_ANLPA,lp->phy[lp->active].addr,DE4X5_MII); j+=4; - } - tmp.lval[j>>2]=mii_rd(0x10,lp->phy[lp->active].addr,DE4X5_MII); j+=4; - if (lp->phy[lp->active].id != BROADCOM_T4) { - tmp.lval[j>>2]=mii_rd(0x11,lp->phy[lp->active].addr,DE4X5_MII); j+=4; - tmp.lval[j>>2]=mii_rd(0x12,lp->phy[lp->active].addr,DE4X5_MII); j+=4; - } else { - tmp.lval[j>>2]=mii_rd(0x14,lp->phy[lp->active].addr,DE4X5_MII); j+=4; - } - } - - tmp.addr[j++] = lp->txRingSize; - tmp.addr[j++] = netif_queue_stopped(dev); - - ioc->len = j; - if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT; - break; - -*/ - default: - return -EOPNOTSUPP; - } - - return status; -} - -static int __init de4x5_module_init (void) -{ - int err = 0; - -#ifdef CONFIG_PCI - err = pci_register_driver(&de4x5_pci_driver); -#endif -#ifdef CONFIG_EISA - err |= eisa_driver_register (&de4x5_eisa_driver); -#endif - - return err; -} - -static void __exit de4x5_module_exit (void) -{ -#ifdef CONFIG_PCI - pci_unregister_driver (&de4x5_pci_driver); -#endif -#ifdef CONFIG_EISA - eisa_driver_unregister (&de4x5_eisa_driver); -#endif -} - -module_init (de4x5_module_init); -module_exit (de4x5_module_exit); diff --git a/drivers/net/tulip/de4x5.h b/drivers/net/tulip/de4x5.h deleted file mode 100644 index 9f2877438fb..00000000000 --- a/drivers/net/tulip/de4x5.h +++ /dev/null @@ -1,1019 +0,0 @@ -/* - Copyright 1994 Digital Equipment Corporation. - - This software may be used and distributed according to the terms of the - GNU General Public License, incorporated herein by reference. - - The author may be reached as davies@wanton.lkg.dec.com or Digital - Equipment Corporation, 550 King Street, Littleton MA 01460. - - ========================================================================= -*/ - -/* -** DC21040 CSR<1..15> Register Address Map -*/ -#define DE4X5_BMR iobase+(0x000 << lp->bus) /* Bus Mode Register */ -#define DE4X5_TPD iobase+(0x008 << lp->bus) /* Transmit Poll Demand Reg */ -#define DE4X5_RPD iobase+(0x010 << lp->bus) /* Receive Poll Demand Reg */ -#define DE4X5_RRBA iobase+(0x018 << lp->bus) /* RX Ring Base Address Reg */ -#define DE4X5_TRBA iobase+(0x020 << lp->bus) /* TX Ring Base Address Reg */ -#define DE4X5_STS iobase+(0x028 << lp->bus) /* Status Register */ -#define DE4X5_OMR iobase+(0x030 << lp->bus) /* Operation Mode Register */ -#define DE4X5_IMR iobase+(0x038 << lp->bus) /* Interrupt Mask Register */ -#define DE4X5_MFC iobase+(0x040 << lp->bus) /* Missed Frame Counter */ -#define DE4X5_APROM iobase+(0x048 << lp->bus) /* Ethernet Address PROM */ -#define DE4X5_BROM iobase+(0x048 << lp->bus) /* Boot ROM Register */ -#define DE4X5_SROM iobase+(0x048 << lp->bus) /* Serial ROM Register */ -#define DE4X5_MII iobase+(0x048 << lp->bus) /* MII Interface Register */ -#define DE4X5_DDR iobase+(0x050 << lp->bus) /* Data Diagnostic Register */ -#define DE4X5_FDR iobase+(0x058 << lp->bus) /* Full Duplex Register */ -#define DE4X5_GPT iobase+(0x058 << lp->bus) /* General Purpose Timer Reg.*/ -#define DE4X5_GEP iobase+(0x060 << lp->bus) /* General Purpose Register */ -#define DE4X5_SISR iobase+(0x060 << lp->bus) /* SIA Status Register */ -#define DE4X5_SICR iobase+(0x068 << lp->bus) /* SIA Connectivity Register */ -#define DE4X5_STRR iobase+(0x070 << lp->bus) /* SIA TX/RX Register */ -#define DE4X5_SIGR iobase+(0x078 << lp->bus) /* SIA General Register */ - -/* -** EISA Register Address Map -*/ -#define EISA_ID iobase+0x0c80 /* EISA ID Registers */ -#define EISA_ID0 iobase+0x0c80 /* EISA ID Register 0 */ -#define EISA_ID1 iobase+0x0c81 /* EISA ID Register 1 */ -#define EISA_ID2 iobase+0x0c82 /* EISA ID Register 2 */ -#define EISA_ID3 iobase+0x0c83 /* EISA ID Register 3 */ -#define EISA_CR iobase+0x0c84 /* EISA Control Register */ -#define EISA_REG0 iobase+0x0c88 /* EISA Configuration Register 0 */ -#define EISA_REG1 iobase+0x0c89 /* EISA Configuration Register 1 */ -#define EISA_REG2 iobase+0x0c8a /* EISA Configuration Register 2 */ -#define EISA_REG3 iobase+0x0c8f /* EISA Configuration Register 3 */ -#define EISA_APROM iobase+0x0c90 /* Ethernet Address PROM */ - -/* -** PCI/EISA Configuration Registers Address Map -*/ -#define PCI_CFID iobase+0x0008 /* PCI Configuration ID Register */ -#define PCI_CFCS iobase+0x000c /* PCI Command/Status Register */ -#define PCI_CFRV iobase+0x0018 /* PCI Revision Register */ -#define PCI_CFLT iobase+0x001c /* PCI Latency Timer Register */ -#define PCI_CBIO iobase+0x0028 /* PCI Base I/O Register */ -#define PCI_CBMA iobase+0x002c /* PCI Base Memory Address Register */ -#define PCI_CBER iobase+0x0030 /* PCI Expansion ROM Base Address Reg. */ -#define PCI_CFIT iobase+0x003c /* PCI Configuration Interrupt Register */ -#define PCI_CFDA iobase+0x0040 /* PCI Driver Area Register */ -#define PCI_CFDD iobase+0x0041 /* PCI Driver Dependent Area Register */ -#define PCI_CFPM iobase+0x0043 /* PCI Power Management Area Register */ - -/* -** EISA Configuration Register 0 bit definitions -*/ -#define ER0_BSW 0x80 /* EISA Bus Slave Width, 1: 32 bits */ -#define ER0_BMW 0x40 /* EISA Bus Master Width, 1: 32 bits */ -#define ER0_EPT 0x20 /* EISA PREEMPT Time, 0: 23 BCLKs */ -#define ER0_ISTS 0x10 /* Interrupt Status (X) */ -#define ER0_LI 0x08 /* Latch Interrupts */ -#define ER0_INTL 0x06 /* INTerrupt Level */ -#define ER0_INTT 0x01 /* INTerrupt Type, 0: Level, 1: Edge */ - -/* -** EISA Configuration Register 1 bit definitions -*/ -#define ER1_IAM 0xe0 /* ISA Address Mode */ -#define ER1_IAE 0x10 /* ISA Addressing Enable */ -#define ER1_UPIN 0x0f /* User Pins */ - -/* -** EISA Configuration Register 2 bit definitions -*/ -#define ER2_BRS 0xc0 /* Boot ROM Size */ -#define ER2_BRA 0x3c /* Boot ROM Address <16:13> */ - -/* -** EISA Configuration Register 3 bit definitions -*/ -#define ER3_BWE 0x40 /* Burst Write Enable */ -#define ER3_BRE 0x04 /* Burst Read Enable */ -#define ER3_LSR 0x02 /* Local Software Reset */ - -/* -** PCI Configuration ID Register (PCI_CFID). The Device IDs are left -** shifted 8 bits to allow detection of DC21142 and DC21143 variants with -** the configuration revision register step number. -*/ -#define CFID_DID 0xff00 /* Device ID */ -#define CFID_VID 0x00ff /* Vendor ID */ -#define DC21040_DID 0x0200 /* Unique Device ID # */ -#define DC21040_VID 0x1011 /* DC21040 Manufacturer */ -#define DC21041_DID 0x1400 /* Unique Device ID # */ -#define DC21041_VID 0x1011 /* DC21041 Manufacturer */ -#define DC21140_DID 0x0900 /* Unique Device ID # */ -#define DC21140_VID 0x1011 /* DC21140 Manufacturer */ -#define DC2114x_DID 0x1900 /* Unique Device ID # */ -#define DC2114x_VID 0x1011 /* DC2114[23] Manufacturer */ - -/* -** Chipset defines -*/ -#define DC21040 DC21040_DID -#define DC21041 DC21041_DID -#define DC21140 DC21140_DID -#define DC2114x DC2114x_DID -#define DC21142 (DC2114x_DID | 0x0010) -#define DC21143 (DC2114x_DID | 0x0030) -#define DC2114x_BRK 0x0020 /* CFRV break between DC21142 & DC21143 */ - -#define is_DC21040 ((vendor == DC21040_VID) && (device == DC21040_DID)) -#define is_DC21041 ((vendor == DC21041_VID) && (device == DC21041_DID)) -#define is_DC21140 ((vendor == DC21140_VID) && (device == DC21140_DID)) -#define is_DC2114x ((vendor == DC2114x_VID) && (device == DC2114x_DID)) -#define is_DC21142 ((vendor == DC2114x_VID) && (device == DC21142)) -#define is_DC21143 ((vendor == DC2114x_VID) && (device == DC21143)) - -/* -** PCI Configuration Command/Status Register (PCI_CFCS) -*/ -#define CFCS_DPE 0x80000000 /* Detected Parity Error (S) */ -#define CFCS_SSE 0x40000000 /* Signal System Error (S) */ -#define CFCS_RMA 0x20000000 /* Receive Master Abort (S) */ -#define CFCS_RTA 0x10000000 /* Receive Target Abort (S) */ -#define CFCS_DST 0x06000000 /* DEVSEL Timing (S) */ -#define CFCS_DPR 0x01000000 /* Data Parity Report (S) */ -#define CFCS_FBB 0x00800000 /* Fast Back-To-Back (S) */ -#define CFCS_SEE 0x00000100 /* System Error Enable (C) */ -#define CFCS_PER 0x00000040 /* Parity Error Response (C) */ -#define CFCS_MO 0x00000004 /* Master Operation (C) */ -#define CFCS_MSA 0x00000002 /* Memory Space Access (C) */ -#define CFCS_IOSA 0x00000001 /* I/O Space Access (C) */ - -/* -** PCI Configuration Revision Register (PCI_CFRV) -*/ -#define CFRV_BC 0xff000000 /* Base Class */ -#define CFRV_SC 0x00ff0000 /* Subclass */ -#define CFRV_RN 0x000000f0 /* Revision Number */ -#define CFRV_SN 0x0000000f /* Step Number */ -#define BASE_CLASS 0x02000000 /* Indicates Network Controller */ -#define SUB_CLASS 0x00000000 /* Indicates Ethernet Controller */ -#define STEP_NUMBER 0x00000020 /* Increments for future chips */ -#define REV_NUMBER 0x00000003 /* 0x00, 0x01, 0x02, 0x03: Rev in Step */ -#define CFRV_MASK 0xffff0000 /* Register mask */ - -/* -** PCI Configuration Latency Timer Register (PCI_CFLT) -*/ -#define CFLT_BC 0x0000ff00 /* Latency Timer bits */ - -/* -** PCI Configuration Base I/O Address Register (PCI_CBIO) -*/ -#define CBIO_MASK -128 /* Base I/O Address Mask */ -#define CBIO_IOSI 0x00000001 /* I/O Space Indicator (RO, value is 1) */ - -/* -** PCI Configuration Card Information Structure Register (PCI_CCIS) -*/ -#define CCIS_ROMI 0xf0000000 /* ROM Image */ -#define CCIS_ASO 0x0ffffff8 /* Address Space Offset */ -#define CCIS_ASI 0x00000007 /* Address Space Indicator */ - -/* -** PCI Configuration Subsystem ID Register (PCI_SSID) -*/ -#define SSID_SSID 0xffff0000 /* Subsystem ID */ -#define SSID_SVID 0x0000ffff /* Subsystem Vendor ID */ - -/* -** PCI Configuration Expansion ROM Base Address Register (PCI_CBER) -*/ -#define CBER_MASK 0xfffffc00 /* Expansion ROM Base Address Mask */ -#define CBER_ROME 0x00000001 /* ROM Enable */ - -/* -** PCI Configuration Interrupt Register (PCI_CFIT) -*/ -#define CFIT_MXLT 0xff000000 /* MAX_LAT Value (0.25us periods) */ -#define CFIT_MNGT 0x00ff0000 /* MIN_GNT Value (0.25us periods) */ -#define CFIT_IRQP 0x0000ff00 /* Interrupt Pin */ -#define CFIT_IRQL 0x000000ff /* Interrupt Line */ - -/* -** PCI Configuration Power Management Area Register (PCI_CFPM) -*/ -#define SLEEP 0x80 /* Power Saving Sleep Mode */ -#define SNOOZE 0x40 /* Power Saving Snooze Mode */ -#define WAKEUP 0x00 /* Power Saving Wakeup */ - -#define PCI_CFDA_DSU 0x41 /* 8 bit Configuration Space Address */ -#define PCI_CFDA_PSM 0x43 /* 8 bit Configuration Space Address */ - -/* -** DC21040 Bus Mode Register (DE4X5_BMR) -*/ -#define BMR_RML 0x00200000 /* [Memory] Read Multiple */ -#define BMR_DBO 0x00100000 /* Descriptor Byte Ordering (Endian) */ -#define BMR_TAP 0x000e0000 /* Transmit Automatic Polling */ -#define BMR_DAS 0x00010000 /* Diagnostic Address Space */ -#define BMR_CAL 0x0000c000 /* Cache Alignment */ -#define BMR_PBL 0x00003f00 /* Programmable Burst Length */ -#define BMR_BLE 0x00000080 /* Big/Little Endian */ -#define BMR_DSL 0x0000007c /* Descriptor Skip Length */ -#define BMR_BAR 0x00000002 /* Bus ARbitration */ -#define BMR_SWR 0x00000001 /* Software Reset */ - - /* Timings here are for 10BASE-T/AUI only*/ -#define TAP_NOPOLL 0x00000000 /* No automatic polling */ -#define TAP_200US 0x00020000 /* TX automatic polling every 200us */ -#define TAP_800US 0x00040000 /* TX automatic polling every 800us */ -#define TAP_1_6MS 0x00060000 /* TX automatic polling every 1.6ms */ -#define TAP_12_8US 0x00080000 /* TX automatic polling every 12.8us */ -#define TAP_25_6US 0x000a0000 /* TX automatic polling every 25.6us */ -#define TAP_51_2US 0x000c0000 /* TX automatic polling every 51.2us */ -#define TAP_102_4US 0x000e0000 /* TX automatic polling every 102.4us */ - -#define CAL_NOUSE 0x00000000 /* Not used */ -#define CAL_8LONG 0x00004000 /* 8-longword alignment */ -#define CAL_16LONG 0x00008000 /* 16-longword alignment */ -#define CAL_32LONG 0x0000c000 /* 32-longword alignment */ - -#define PBL_0 0x00000000 /* DMA burst length = amount in RX FIFO */ -#define PBL_1 0x00000100 /* 1 longword DMA burst length */ -#define PBL_2 0x00000200 /* 2 longwords DMA burst length */ -#define PBL_4 0x00000400 /* 4 longwords DMA burst length */ -#define PBL_8 0x00000800 /* 8 longwords DMA burst length */ -#define PBL_16 0x00001000 /* 16 longwords DMA burst length */ -#define PBL_32 0x00002000 /* 32 longwords DMA burst length */ - -#define DSL_0 0x00000000 /* 0 longword / descriptor */ -#define DSL_1 0x00000004 /* 1 longword / descriptor */ -#define DSL_2 0x00000008 /* 2 longwords / descriptor */ -#define DSL_4 0x00000010 /* 4 longwords / descriptor */ -#define DSL_8 0x00000020 /* 8 longwords / descriptor */ -#define DSL_16 0x00000040 /* 16 longwords / descriptor */ -#define DSL_32 0x00000080 /* 32 longwords / descriptor */ - -/* -** DC21040 Transmit Poll Demand Register (DE4X5_TPD) -*/ -#define TPD 0x00000001 /* Transmit Poll Demand */ - -/* -** DC21040 Receive Poll Demand Register (DE4X5_RPD) -*/ -#define RPD 0x00000001 /* Receive Poll Demand */ - -/* -** DC21040 Receive Ring Base Address Register (DE4X5_RRBA) -*/ -#define RRBA 0xfffffffc /* RX Descriptor List Start Address */ - -/* -** DC21040 Transmit Ring Base Address Register (DE4X5_TRBA) -*/ -#define TRBA 0xfffffffc /* TX Descriptor List Start Address */ - -/* -** Status Register (DE4X5_STS) -*/ -#define STS_GPI 0x04000000 /* General Purpose Port Interrupt */ -#define STS_BE 0x03800000 /* Bus Error Bits */ -#define STS_TS 0x00700000 /* Transmit Process State */ -#define STS_RS 0x000e0000 /* Receive Process State */ -#define STS_NIS 0x00010000 /* Normal Interrupt Summary */ -#define STS_AIS 0x00008000 /* Abnormal Interrupt Summary */ -#define STS_ER 0x00004000 /* Early Receive */ -#define STS_FBE 0x00002000 /* Fatal Bus Error */ -#define STS_SE 0x00002000 /* System Error */ -#define STS_LNF 0x00001000 /* Link Fail */ -#define STS_FD 0x00000800 /* Full-Duplex Short Frame Received */ -#define STS_TM 0x00000800 /* Timer Expired (DC21041) */ -#define STS_ETI 0x00000400 /* Early Transmit Interrupt */ -#define STS_AT 0x00000400 /* AUI/TP Pin */ -#define STS_RWT 0x00000200 /* Receive Watchdog Time-Out */ -#define STS_RPS 0x00000100 /* Receive Process Stopped */ -#define STS_RU 0x00000080 /* Receive Buffer Unavailable */ -#define STS_RI 0x00000040 /* Receive Interrupt */ -#define STS_UNF 0x00000020 /* Transmit Underflow */ -#define STS_LNP 0x00000010 /* Link Pass */ -#define STS_ANC 0x00000010 /* Autonegotiation Complete */ -#define STS_TJT 0x00000008 /* Transmit Jabber Time-Out */ -#define STS_TU 0x00000004 /* Transmit Buffer Unavailable */ -#define STS_TPS 0x00000002 /* Transmit Process Stopped */ -#define STS_TI 0x00000001 /* Transmit Interrupt */ - -#define EB_PAR 0x00000000 /* Parity Error */ -#define EB_MA 0x00800000 /* Master Abort */ -#define EB_TA 0x01000000 /* Target Abort */ -#define EB_RES0 0x01800000 /* Reserved */ -#define EB_RES1 0x02000000 /* Reserved */ - -#define TS_STOP 0x00000000 /* Stopped */ -#define TS_FTD 0x00100000 /* Fetch Transmit Descriptor */ -#define TS_WEOT 0x00200000 /* Wait for End Of Transmission */ -#define TS_QDAT 0x00300000 /* Queue skb data into TX FIFO */ -#define TS_RES 0x00400000 /* Reserved */ -#define TS_SPKT 0x00500000 /* Setup Packet */ -#define TS_SUSP 0x00600000 /* Suspended */ -#define TS_CLTD 0x00700000 /* Close Transmit Descriptor */ - -#define RS_STOP 0x00000000 /* Stopped */ -#define RS_FRD 0x00020000 /* Fetch Receive Descriptor */ -#define RS_CEOR 0x00040000 /* Check for End of Receive Packet */ -#define RS_WFRP 0x00060000 /* Wait for Receive Packet */ -#define RS_SUSP 0x00080000 /* Suspended */ -#define RS_CLRD 0x000a0000 /* Close Receive Descriptor */ -#define RS_FLUSH 0x000c0000 /* Flush RX FIFO */ -#define RS_QRFS 0x000e0000 /* Queue RX FIFO into RX Skb */ - -#define INT_CANCEL 0x0001ffff /* For zeroing all interrupt sources */ - -/* -** Operation Mode Register (DE4X5_OMR) -*/ -#define OMR_SC 0x80000000 /* Special Capture Effect Enable */ -#define OMR_RA 0x40000000 /* Receive All */ -#define OMR_SDP 0x02000000 /* SD Polarity - MUST BE ASSERTED */ -#define OMR_SCR 0x01000000 /* Scrambler Mode */ -#define OMR_PCS 0x00800000 /* PCS Function */ -#define OMR_TTM 0x00400000 /* Transmit Threshold Mode */ -#define OMR_SF 0x00200000 /* Store and Forward */ -#define OMR_HBD 0x00080000 /* HeartBeat Disable */ -#define OMR_PS 0x00040000 /* Port Select */ -#define OMR_CA 0x00020000 /* Capture Effect Enable */ -#define OMR_BP 0x00010000 /* Back Pressure */ -#define OMR_TR 0x0000c000 /* Threshold Control Bits */ -#define OMR_ST 0x00002000 /* Start/Stop Transmission Command */ -#define OMR_FC 0x00001000 /* Force Collision Mode */ -#define OMR_OM 0x00000c00 /* Operating Mode */ -#define OMR_FDX 0x00000200 /* Full Duplex Mode */ -#define OMR_FKD 0x00000100 /* Flaky Oscillator Disable */ -#define OMR_PM 0x00000080 /* Pass All Multicast */ -#define OMR_PR 0x00000040 /* Promiscuous Mode */ -#define OMR_SB 0x00000020 /* Start/Stop Backoff Counter */ -#define OMR_IF 0x00000010 /* Inverse Filtering */ -#define OMR_PB 0x00000008 /* Pass Bad Frames */ -#define OMR_HO 0x00000004 /* Hash Only Filtering Mode */ -#define OMR_SR 0x00000002 /* Start/Stop Receive */ -#define OMR_HP 0x00000001 /* Hash/Perfect Receive Filtering Mode */ - -#define TR_72 0x00000000 /* Threshold set to 72 (128) bytes */ -#define TR_96 0x00004000 /* Threshold set to 96 (256) bytes */ -#define TR_128 0x00008000 /* Threshold set to 128 (512) bytes */ -#define TR_160 0x0000c000 /* Threshold set to 160 (1024) bytes */ - -#define OMR_DEF (OMR_SDP) -#define OMR_SIA (OMR_SDP | OMR_TTM) -#define OMR_SYM (OMR_SDP | OMR_SCR | OMR_PCS | OMR_HBD | OMR_PS) -#define OMR_MII_10 (OMR_SDP | OMR_TTM | OMR_PS) -#define OMR_MII_100 (OMR_SDP | OMR_HBD | OMR_PS) - -/* -** DC21040 Interrupt Mask Register (DE4X5_IMR) -*/ -#define IMR_GPM 0x04000000 /* General Purpose Port Mask */ -#define IMR_NIM 0x00010000 /* Normal Interrupt Summary Mask */ -#define IMR_AIM 0x00008000 /* Abnormal Interrupt Summary Mask */ -#define IMR_ERM 0x00004000 /* Early Receive Mask */ -#define IMR_FBM 0x00002000 /* Fatal Bus Error Mask */ -#define IMR_SEM 0x00002000 /* System Error Mask */ -#define IMR_LFM 0x00001000 /* Link Fail Mask */ -#define IMR_FDM 0x00000800 /* Full-Duplex (Short Frame) Mask */ -#define IMR_TMM 0x00000800 /* Timer Expired Mask (DC21041) */ -#define IMR_ETM 0x00000400 /* Early Transmit Interrupt Mask */ -#define IMR_ATM 0x00000400 /* AUI/TP Switch Mask */ -#define IMR_RWM 0x00000200 /* Receive Watchdog Time-Out Mask */ -#define IMR_RSM 0x00000100 /* Receive Stopped Mask */ -#define IMR_RUM 0x00000080 /* Receive Buffer Unavailable Mask */ -#define IMR_RIM 0x00000040 /* Receive Interrupt Mask */ -#define IMR_UNM 0x00000020 /* Underflow Interrupt Mask */ -#define IMR_ANM 0x00000010 /* Autonegotiation Complete Mask */ -#define IMR_LPM 0x00000010 /* Link Pass */ -#define IMR_TJM 0x00000008 /* Transmit Time-Out Jabber Mask */ -#define IMR_TUM 0x00000004 /* Transmit Buffer Unavailable Mask */ -#define IMR_TSM 0x00000002 /* Transmission Stopped Mask */ -#define IMR_TIM 0x00000001 /* Transmit Interrupt Mask */ - -/* -** Missed Frames and FIFO Overflow Counters (DE4X5_MFC) -*/ -#define MFC_FOCO 0x10000000 /* FIFO Overflow Counter Overflow Bit */ -#define MFC_FOC 0x0ffe0000 /* FIFO Overflow Counter Bits */ -#define MFC_OVFL 0x00010000 /* Missed Frames Counter Overflow Bit */ -#define MFC_CNTR 0x0000ffff /* Missed Frames Counter Bits */ -#define MFC_FOCM 0x1ffe0000 /* FIFO Overflow Counter Mask */ - -/* -** DC21040 Ethernet Address PROM (DE4X5_APROM) -*/ -#define APROM_DN 0x80000000 /* Data Not Valid */ -#define APROM_DT 0x000000ff /* Address Byte */ - -/* -** DC21041 Boot/Ethernet Address ROM (DE4X5_BROM) -*/ -#define BROM_MODE 0x00008000 /* MODE_1: 0, MODE_0: 1 (read only) */ -#define BROM_RD 0x00004000 /* Read from Boot ROM */ -#define BROM_WR 0x00002000 /* Write to Boot ROM */ -#define BROM_BR 0x00001000 /* Select Boot ROM when set */ -#define BROM_SR 0x00000800 /* Select Serial ROM when set */ -#define BROM_REG 0x00000400 /* External Register Select */ -#define BROM_DT 0x000000ff /* Data Byte */ - -/* -** DC21041 Serial/Ethernet Address ROM (DE4X5_SROM, DE4X5_MII) -*/ -#define MII_MDI 0x00080000 /* MII Management Data In */ -#define MII_MDO 0x00060000 /* MII Management Mode/Data Out */ -#define MII_MRD 0x00040000 /* MII Management Define Read Mode */ -#define MII_MWR 0x00000000 /* MII Management Define Write Mode */ -#define MII_MDT 0x00020000 /* MII Management Data Out */ -#define MII_MDC 0x00010000 /* MII Management Clock */ -#define MII_RD 0x00004000 /* Read from MII */ -#define MII_WR 0x00002000 /* Write to MII */ -#define MII_SEL 0x00000800 /* Select MII when RESET */ - -#define SROM_MODE 0x00008000 /* MODE_1: 0, MODE_0: 1 (read only) */ -#define SROM_RD 0x00004000 /* Read from Boot ROM */ -#define SROM_WR 0x00002000 /* Write to Boot ROM */ -#define SROM_BR 0x00001000 /* Select Boot ROM when set */ -#define SROM_SR 0x00000800 /* Select Serial ROM when set */ -#define SROM_REG 0x00000400 /* External Register Select */ -#define SROM_DT 0x000000ff /* Data Byte */ - -#define DT_OUT 0x00000008 /* Serial Data Out */ -#define DT_IN 0x00000004 /* Serial Data In */ -#define DT_CLK 0x00000002 /* Serial ROM Clock */ -#define DT_CS 0x00000001 /* Serial ROM Chip Select */ - -#define MII_PREAMBLE 0xffffffff /* MII Management Preamble */ -#define MII_TEST 0xaaaaaaaa /* MII Test Signal */ -#define MII_STRD 0x06 /* Start of Frame+Op Code: use low nibble */ -#define MII_STWR 0x0a /* Start of Frame+Op Code: use low nibble */ - -#define MII_CR 0x00 /* MII Management Control Register */ -#define MII_SR 0x01 /* MII Management Status Register */ -#define MII_ID0 0x02 /* PHY Identifier Register 0 */ -#define MII_ID1 0x03 /* PHY Identifier Register 1 */ -#define MII_ANA 0x04 /* Auto Negotiation Advertisement */ -#define MII_ANLPA 0x05 /* Auto Negotiation Link Partner Ability */ -#define MII_ANE 0x06 /* Auto Negotiation Expansion */ -#define MII_ANP 0x07 /* Auto Negotiation Next Page TX */ - -#define DE4X5_MAX_MII 32 /* Maximum address of MII PHY devices */ - -/* -** MII Management Control Register -*/ -#define MII_CR_RST 0x8000 /* RESET the PHY chip */ -#define MII_CR_LPBK 0x4000 /* Loopback enable */ -#define MII_CR_SPD 0x2000 /* 0: 10Mb/s; 1: 100Mb/s */ -#define MII_CR_10 0x0000 /* Set 10Mb/s */ -#define MII_CR_100 0x2000 /* Set 100Mb/s */ -#define MII_CR_ASSE 0x1000 /* Auto Speed Select Enable */ -#define MII_CR_PD 0x0800 /* Power Down */ -#define MII_CR_ISOL 0x0400 /* Isolate Mode */ -#define MII_CR_RAN 0x0200 /* Restart Auto Negotiation */ -#define MII_CR_FDM 0x0100 /* Full Duplex Mode */ -#define MII_CR_CTE 0x0080 /* Collision Test Enable */ - -/* -** MII Management Status Register -*/ -#define MII_SR_T4C 0x8000 /* 100BASE-T4 capable */ -#define MII_SR_TXFD 0x4000 /* 100BASE-TX Full Duplex capable */ -#define MII_SR_TXHD 0x2000 /* 100BASE-TX Half Duplex capable */ -#define MII_SR_TFD 0x1000 /* 10BASE-T Full Duplex capable */ -#define MII_SR_THD 0x0800 /* 10BASE-T Half Duplex capable */ -#define MII_SR_ASSC 0x0020 /* Auto Speed Selection Complete*/ -#define MII_SR_RFD 0x0010 /* Remote Fault Detected */ -#define MII_SR_ANC 0x0008 /* Auto Negotiation capable */ -#define MII_SR_LKS 0x0004 /* Link Status */ -#define MII_SR_JABD 0x0002 /* Jabber Detect */ -#define MII_SR_XC 0x0001 /* Extended Capabilities */ - -/* -** MII Management Auto Negotiation Advertisement Register -*/ -#define MII_ANA_TAF 0x03e0 /* Technology Ability Field */ -#define MII_ANA_T4AM 0x0200 /* T4 Technology Ability Mask */ -#define MII_ANA_TXAM 0x0180 /* TX Technology Ability Mask */ -#define MII_ANA_FDAM 0x0140 /* Full Duplex Technology Ability Mask */ -#define MII_ANA_HDAM 0x02a0 /* Half Duplex Technology Ability Mask */ -#define MII_ANA_100M 0x0380 /* 100Mb Technology Ability Mask */ -#define MII_ANA_10M 0x0060 /* 10Mb Technology Ability Mask */ -#define MII_ANA_CSMA 0x0001 /* CSMA-CD Capable */ - -/* -** MII Management Auto Negotiation Remote End Register -*/ -#define MII_ANLPA_NP 0x8000 /* Next Page (Enable) */ -#define MII_ANLPA_ACK 0x4000 /* Remote Acknowledge */ -#define MII_ANLPA_RF 0x2000 /* Remote Fault */ -#define MII_ANLPA_TAF 0x03e0 /* Technology Ability Field */ -#define MII_ANLPA_T4AM 0x0200 /* T4 Technology Ability Mask */ -#define MII_ANLPA_TXAM 0x0180 /* TX Technology Ability Mask */ -#define MII_ANLPA_FDAM 0x0140 /* Full Duplex Technology Ability Mask */ -#define MII_ANLPA_HDAM 0x02a0 /* Half Duplex Technology Ability Mask */ -#define MII_ANLPA_100M 0x0380 /* 100Mb Technology Ability Mask */ -#define MII_ANLPA_10M 0x0060 /* 10Mb Technology Ability Mask */ -#define MII_ANLPA_CSMA 0x0001 /* CSMA-CD Capable */ - -/* -** SROM Media Definitions (ABG SROM Section) -*/ -#define MEDIA_NWAY 0x0080 /* Nway (Auto Negotiation) on PHY */ -#define MEDIA_MII 0x0040 /* MII Present on the adapter */ -#define MEDIA_FIBRE 0x0008 /* Fibre Media present */ -#define MEDIA_AUI 0x0004 /* AUI Media present */ -#define MEDIA_TP 0x0002 /* TP Media present */ -#define MEDIA_BNC 0x0001 /* BNC Media present */ - -/* -** SROM Definitions (Digital Semiconductor Format) -*/ -#define SROM_SSVID 0x0000 /* Sub-system Vendor ID offset */ -#define SROM_SSID 0x0002 /* Sub-system ID offset */ -#define SROM_CISPL 0x0004 /* CardBus CIS Pointer low offset */ -#define SROM_CISPH 0x0006 /* CardBus CIS Pointer high offset */ -#define SROM_IDCRC 0x0010 /* ID Block CRC offset*/ -#define SROM_RSVD2 0x0011 /* ID Reserved 2 offset */ -#define SROM_SFV 0x0012 /* SROM Format Version offset */ -#define SROM_CCNT 0x0013 /* Controller Count offset */ -#define SROM_HWADD 0x0014 /* Hardware Address offset */ -#define SROM_MRSVD 0x007c /* Manufacturer Reserved offset*/ -#define SROM_CRC 0x007e /* SROM CRC offset */ - -/* -** SROM Media Connection Definitions -*/ -#define SROM_10BT 0x0000 /* 10BASE-T half duplex */ -#define SROM_10BTN 0x0100 /* 10BASE-T with Nway */ -#define SROM_10BTF 0x0204 /* 10BASE-T full duplex */ -#define SROM_10BTNLP 0x0400 /* 10BASE-T without Link Pass test */ -#define SROM_10B2 0x0001 /* 10BASE-2 (BNC) */ -#define SROM_10B5 0x0002 /* 10BASE-5 (AUI) */ -#define SROM_100BTH 0x0003 /* 100BASE-T half duplex */ -#define SROM_100BTF 0x0205 /* 100BASE-T full duplex */ -#define SROM_100BT4 0x0006 /* 100BASE-T4 */ -#define SROM_100BFX 0x0007 /* 100BASE-FX half duplex (Fiber) */ -#define SROM_M10BT 0x0009 /* MII 10BASE-T half duplex */ -#define SROM_M10BTF 0x020a /* MII 10BASE-T full duplex */ -#define SROM_M100BT 0x000d /* MII 100BASE-T half duplex */ -#define SROM_M100BTF 0x020e /* MII 100BASE-T full duplex */ -#define SROM_M100BT4 0x000f /* MII 100BASE-T4 */ -#define SROM_M100BF 0x0010 /* MII 100BASE-FX half duplex */ -#define SROM_M100BFF 0x0211 /* MII 100BASE-FX full duplex */ -#define SROM_PDA 0x0800 /* Powerup & Dynamic Autosense */ -#define SROM_PAO 0x8800 /* Powerup Autosense Only */ -#define SROM_NSMI 0xffff /* No Selected Media Information */ - -/* -** SROM Media Definitions -*/ -#define SROM_10BASET 0x0000 /* 10BASE-T half duplex */ -#define SROM_10BASE2 0x0001 /* 10BASE-2 (BNC) */ -#define SROM_10BASE5 0x0002 /* 10BASE-5 (AUI) */ -#define SROM_100BASET 0x0003 /* 100BASE-T half duplex */ -#define SROM_10BASETF 0x0004 /* 10BASE-T full duplex */ -#define SROM_100BASETF 0x0005 /* 100BASE-T full duplex */ -#define SROM_100BASET4 0x0006 /* 100BASE-T4 */ -#define SROM_100BASEF 0x0007 /* 100BASE-FX half duplex */ -#define SROM_100BASEFF 0x0008 /* 100BASE-FX full duplex */ - -#define BLOCK_LEN 0x7f /* Extended blocks length mask */ -#define EXT_FIELD 0x40 /* Extended blocks extension field bit */ -#define MEDIA_CODE 0x3f /* Extended blocks media code mask */ - -/* -** SROM Compact Format Block Masks -*/ -#define COMPACT_FI 0x80 /* Format Indicator */ -#define COMPACT_LEN 0x04 /* Length */ -#define COMPACT_MC 0x3f /* Media Code */ - -/* -** SROM Extended Format Block Type 0 Masks -*/ -#define BLOCK0_FI 0x80 /* Format Indicator */ -#define BLOCK0_MCS 0x80 /* Media Code byte Sign */ -#define BLOCK0_MC 0x3f /* Media Code */ - -/* -** DC21040 Full Duplex Register (DE4X5_FDR) -*/ -#define FDR_FDACV 0x0000ffff /* Full Duplex Auto Configuration Value */ - -/* -** DC21041 General Purpose Timer Register (DE4X5_GPT) -*/ -#define GPT_CON 0x00010000 /* One shot: 0, Continuous: 1 */ -#define GPT_VAL 0x0000ffff /* Timer Value */ - -/* -** DC21140 General Purpose Register (DE4X5_GEP) (hardware dependent bits) -*/ -/* Valid ONLY for DE500 hardware */ -#define GEP_LNP 0x00000080 /* Link Pass (input) */ -#define GEP_SLNK 0x00000040 /* SYM LINK (input) */ -#define GEP_SDET 0x00000020 /* Signal Detect (input) */ -#define GEP_HRST 0x00000010 /* Hard RESET (to PHY) (output) */ -#define GEP_FDXD 0x00000008 /* Full Duplex Disable (output) */ -#define GEP_PHYL 0x00000004 /* PHY Loopback (output) */ -#define GEP_FLED 0x00000002 /* Force Activity LED on (output) */ -#define GEP_MODE 0x00000001 /* 0: 10Mb/s, 1: 100Mb/s */ -#define GEP_INIT 0x0000011f /* Setup inputs (0) and outputs (1) */ -#define GEP_CTRL 0x00000100 /* GEP control bit */ - -/* -** SIA Register Defaults -*/ -#define CSR13 0x00000001 -#define CSR14 0x0003ff7f /* Autonegotiation disabled */ -#define CSR15 0x00000008 - -/* -** SIA Status Register (DE4X5_SISR) -*/ -#define SISR_LPC 0xffff0000 /* Link Partner's Code Word */ -#define SISR_LPN 0x00008000 /* Link Partner Negotiable */ -#define SISR_ANS 0x00007000 /* Auto Negotiation Arbitration State */ -#define SISR_NSN 0x00000800 /* Non Stable NLPs Detected (DC21041) */ -#define SISR_TRF 0x00000800 /* Transmit Remote Fault */ -#define SISR_NSND 0x00000400 /* Non Stable NLPs Detected (DC21142) */ -#define SISR_ANR_FDS 0x00000400 /* Auto Negotiate Restart/Full Duplex Sel.*/ -#define SISR_TRA 0x00000200 /* 10BASE-T Receive Port Activity */ -#define SISR_NRA 0x00000200 /* Non Selected Port Receive Activity */ -#define SISR_ARA 0x00000100 /* AUI Receive Port Activity */ -#define SISR_SRA 0x00000100 /* Selected Port Receive Activity */ -#define SISR_DAO 0x00000080 /* PLL All One */ -#define SISR_DAZ 0x00000040 /* PLL All Zero */ -#define SISR_DSP 0x00000020 /* PLL Self-Test Pass */ -#define SISR_DSD 0x00000010 /* PLL Self-Test Done */ -#define SISR_APS 0x00000008 /* Auto Polarity State */ -#define SISR_LKF 0x00000004 /* Link Fail Status */ -#define SISR_LS10 0x00000004 /* 10Mb/s Link Fail Status */ -#define SISR_NCR 0x00000002 /* Network Connection Error */ -#define SISR_LS100 0x00000002 /* 100Mb/s Link Fail Status */ -#define SISR_PAUI 0x00000001 /* AUI_TP Indication */ -#define SISR_MRA 0x00000001 /* MII Receive Port Activity */ - -#define ANS_NDIS 0x00000000 /* Nway disable */ -#define ANS_TDIS 0x00001000 /* Transmit Disable */ -#define ANS_ADET 0x00002000 /* Ability Detect */ -#define ANS_ACK 0x00003000 /* Acknowledge */ -#define ANS_CACK 0x00004000 /* Complete Acknowledge */ -#define ANS_NWOK 0x00005000 /* Nway OK - FLP Link Good */ -#define ANS_LCHK 0x00006000 /* Link Check */ - -#define SISR_RST 0x00000301 /* CSR12 reset */ -#define SISR_ANR 0x00001301 /* Autonegotiation restart */ - -/* -** SIA Connectivity Register (DE4X5_SICR) -*/ -#define SICR_SDM 0xffff0000 /* SIA Diagnostics Mode */ -#define SICR_OE57 0x00008000 /* Output Enable 5 6 7 */ -#define SICR_OE24 0x00004000 /* Output Enable 2 4 */ -#define SICR_OE13 0x00002000 /* Output Enable 1 3 */ -#define SICR_IE 0x00001000 /* Input Enable */ -#define SICR_EXT 0x00000000 /* SIA MUX Select External SIA Mode */ -#define SICR_D_SIA 0x00000400 /* SIA MUX Select Diagnostics - SIA Sigs */ -#define SICR_DPLL 0x00000800 /* SIA MUX Select Diagnostics - DPLL Sigs*/ -#define SICR_APLL 0x00000a00 /* SIA MUX Select Diagnostics - DPLL Sigs*/ -#define SICR_D_RxM 0x00000c00 /* SIA MUX Select Diagnostics - RxM Sigs */ -#define SICR_M_RxM 0x00000d00 /* SIA MUX Select Diagnostics - RxM Sigs */ -#define SICR_LNKT 0x00000e00 /* SIA MUX Select Diagnostics - Link Test*/ -#define SICR_SEL 0x00000f00 /* SIA MUX Select AUI or TP with LEDs */ -#define SICR_ASE 0x00000080 /* APLL Start Enable*/ -#define SICR_SIM 0x00000040 /* Serial Interface Input Multiplexer */ -#define SICR_ENI 0x00000020 /* Encoder Input Multiplexer */ -#define SICR_EDP 0x00000010 /* SIA PLL External Input Enable */ -#define SICR_AUI 0x00000008 /* 10Base-T (0) or AUI (1) */ -#define SICR_CAC 0x00000004 /* CSR Auto Configuration */ -#define SICR_PS 0x00000002 /* Pin AUI/TP Selection */ -#define SICR_SRL 0x00000001 /* SIA Reset */ -#define SIA_RESET 0x00000000 /* SIA Reset Value */ - -/* -** SIA Transmit and Receive Register (DE4X5_STRR) -*/ -#define STRR_TAS 0x00008000 /* 10Base-T/AUI Autosensing Enable */ -#define STRR_SPP 0x00004000 /* Set Polarity Plus */ -#define STRR_APE 0x00002000 /* Auto Polarity Enable */ -#define STRR_LTE 0x00001000 /* Link Test Enable */ -#define STRR_SQE 0x00000800 /* Signal Quality Enable */ -#define STRR_CLD 0x00000400 /* Collision Detect Enable */ -#define STRR_CSQ 0x00000200 /* Collision Squelch Enable */ -#define STRR_RSQ 0x00000100 /* Receive Squelch Enable */ -#define STRR_ANE 0x00000080 /* Auto Negotiate Enable */ -#define STRR_HDE 0x00000040 /* Half Duplex Enable */ -#define STRR_CPEN 0x00000030 /* Compensation Enable */ -#define STRR_LSE 0x00000008 /* Link Pulse Send Enable */ -#define STRR_DREN 0x00000004 /* Driver Enable */ -#define STRR_LBK 0x00000002 /* Loopback Enable */ -#define STRR_ECEN 0x00000001 /* Encoder Enable */ -#define STRR_RESET 0xffffffff /* Reset value for STRR */ - -/* -** SIA General Register (DE4X5_SIGR) -*/ -#define SIGR_RMI 0x40000000 /* Receive Match Interrupt */ -#define SIGR_GI1 0x20000000 /* General Port Interrupt 1 */ -#define SIGR_GI0 0x10000000 /* General Port Interrupt 0 */ -#define SIGR_CWE 0x08000000 /* Control Write Enable */ -#define SIGR_RME 0x04000000 /* Receive Match Enable */ -#define SIGR_GEI1 0x02000000 /* GEP Interrupt Enable on Port 1 */ -#define SIGR_GEI0 0x01000000 /* GEP Interrupt Enable on Port 0 */ -#define SIGR_LGS3 0x00800000 /* LED/GEP3 Select */ -#define SIGR_LGS2 0x00400000 /* LED/GEP2 Select */ -#define SIGR_LGS1 0x00200000 /* LED/GEP1 Select */ -#define SIGR_LGS0 0x00100000 /* LED/GEP0 Select */ -#define SIGR_MD 0x000f0000 /* General Purpose Mode and Data */ -#define SIGR_LV2 0x00008000 /* General Purpose LED2 value */ -#define SIGR_LE2 0x00004000 /* General Purpose LED2 enable */ -#define SIGR_FRL 0x00002000 /* Force Receiver Low */ -#define SIGR_DPST 0x00001000 /* PLL Self Test Start */ -#define SIGR_LSD 0x00000800 /* LED Stretch Disable */ -#define SIGR_FLF 0x00000400 /* Force Link Fail */ -#define SIGR_FUSQ 0x00000200 /* Force Unsquelch */ -#define SIGR_TSCK 0x00000100 /* Test Clock */ -#define SIGR_LV1 0x00000080 /* General Purpose LED1 value */ -#define SIGR_LE1 0x00000040 /* General Purpose LED1 enable */ -#define SIGR_RWR 0x00000020 /* Receive Watchdog Release */ -#define SIGR_RWD 0x00000010 /* Receive Watchdog Disable */ -#define SIGR_ABM 0x00000008 /* BNC: 0, AUI:1 */ -#define SIGR_JCK 0x00000004 /* Jabber Clock */ -#define SIGR_HUJ 0x00000002 /* Host Unjab */ -#define SIGR_JBD 0x00000001 /* Jabber Disable */ -#define SIGR_RESET 0xffff0000 /* Reset value for SIGR */ - -/* -** Receive Descriptor Bit Summary -*/ -#define R_OWN 0x80000000 /* Own Bit */ -#define RD_FF 0x40000000 /* Filtering Fail */ -#define RD_FL 0x3fff0000 /* Frame Length */ -#define RD_ES 0x00008000 /* Error Summary */ -#define RD_LE 0x00004000 /* Length Error */ -#define RD_DT 0x00003000 /* Data Type */ -#define RD_RF 0x00000800 /* Runt Frame */ -#define RD_MF 0x00000400 /* Multicast Frame */ -#define RD_FS 0x00000200 /* First Descriptor */ -#define RD_LS 0x00000100 /* Last Descriptor */ -#define RD_TL 0x00000080 /* Frame Too Long */ -#define RD_CS 0x00000040 /* Collision Seen */ -#define RD_FT 0x00000020 /* Frame Type */ -#define RD_RJ 0x00000010 /* Receive Watchdog */ -#define RD_RE 0x00000008 /* Report on MII Error */ -#define RD_DB 0x00000004 /* Dribbling Bit */ -#define RD_CE 0x00000002 /* CRC Error */ -#define RD_OF 0x00000001 /* Overflow */ - -#define RD_RER 0x02000000 /* Receive End Of Ring */ -#define RD_RCH 0x01000000 /* Second Address Chained */ -#define RD_RBS2 0x003ff800 /* Buffer 2 Size */ -#define RD_RBS1 0x000007ff /* Buffer 1 Size */ - -/* -** Transmit Descriptor Bit Summary -*/ -#define T_OWN 0x80000000 /* Own Bit */ -#define TD_ES 0x00008000 /* Error Summary */ -#define TD_TO 0x00004000 /* Transmit Jabber Time-Out */ -#define TD_LO 0x00000800 /* Loss Of Carrier */ -#define TD_NC 0x00000400 /* No Carrier */ -#define TD_LC 0x00000200 /* Late Collision */ -#define TD_EC 0x00000100 /* Excessive Collisions */ -#define TD_HF 0x00000080 /* Heartbeat Fail */ -#define TD_CC 0x00000078 /* Collision Counter */ -#define TD_LF 0x00000004 /* Link Fail */ -#define TD_UF 0x00000002 /* Underflow Error */ -#define TD_DE 0x00000001 /* Deferred */ - -#define TD_IC 0x80000000 /* Interrupt On Completion */ -#define TD_LS 0x40000000 /* Last Segment */ -#define TD_FS 0x20000000 /* First Segment */ -#define TD_FT1 0x10000000 /* Filtering Type */ -#define TD_SET 0x08000000 /* Setup Packet */ -#define TD_AC 0x04000000 /* Add CRC Disable */ -#define TD_TER 0x02000000 /* Transmit End Of Ring */ -#define TD_TCH 0x01000000 /* Second Address Chained */ -#define TD_DPD 0x00800000 /* Disabled Padding */ -#define TD_FT0 0x00400000 /* Filtering Type */ -#define TD_TBS2 0x003ff800 /* Buffer 2 Size */ -#define TD_TBS1 0x000007ff /* Buffer 1 Size */ - -#define PERFECT_F 0x00000000 -#define HASH_F TD_FT0 -#define INVERSE_F TD_FT1 -#define HASH_O_F (TD_FT1 | TD_F0) - -/* -** Media / mode state machine definitions -** User selectable: -*/ -#define TP 0x0040 /* 10Base-T (now equiv to _10Mb) */ -#define TP_NW 0x0002 /* 10Base-T with Nway */ -#define BNC 0x0004 /* Thinwire */ -#define AUI 0x0008 /* Thickwire */ -#define BNC_AUI 0x0010 /* BNC/AUI on DC21040 indistinguishable */ -#define _10Mb 0x0040 /* 10Mb/s Ethernet */ -#define _100Mb 0x0080 /* 100Mb/s Ethernet */ -#define AUTO 0x4000 /* Auto sense the media or speed */ - -/* -** Internal states -*/ -#define NC 0x0000 /* No Connection */ -#define ANS 0x0020 /* Intermediate AutoNegotiation State */ -#define SPD_DET 0x0100 /* Parallel speed detection */ -#define INIT 0x0200 /* Initial state */ -#define EXT_SIA 0x0400 /* External SIA for motherboard chip */ -#define ANS_SUSPECT 0x0802 /* Suspect the ANS (TP) port is down */ -#define TP_SUSPECT 0x0803 /* Suspect the TP port is down */ -#define BNC_AUI_SUSPECT 0x0804 /* Suspect the BNC or AUI port is down */ -#define EXT_SIA_SUSPECT 0x0805 /* Suspect the EXT SIA port is down */ -#define BNC_SUSPECT 0x0806 /* Suspect the BNC port is down */ -#define AUI_SUSPECT 0x0807 /* Suspect the AUI port is down */ -#define MII 0x1000 /* MII on the 21143 */ - -#define TIMER_CB 0x80000000 /* Timer callback detection */ - -/* -** DE4X5 DEBUG Options -*/ -#define DEBUG_NONE 0x0000 /* No DEBUG messages */ -#define DEBUG_VERSION 0x0001 /* Print version message */ -#define DEBUG_MEDIA 0x0002 /* Print media messages */ -#define DEBUG_TX 0x0004 /* Print TX (queue_pkt) messages */ -#define DEBUG_RX 0x0008 /* Print RX (de4x5_rx) messages */ -#define DEBUG_SROM 0x0010 /* Print SROM messages */ -#define DEBUG_MII 0x0020 /* Print MII messages */ -#define DEBUG_OPEN 0x0040 /* Print de4x5_open() messages */ -#define DEBUG_CLOSE 0x0080 /* Print de4x5_close() messages */ -#define DEBUG_PCICFG 0x0100 -#define DEBUG_ALL 0x01ff - -/* -** Miscellaneous -*/ -#define PCI 0 -#define EISA 1 - -#define HASH_TABLE_LEN 512 /* Bits */ -#define HASH_BITS 0x01ff /* 9 LS bits */ - -#define SETUP_FRAME_LEN 192 /* Bytes */ -#define IMPERF_PA_OFFSET 156 /* Bytes */ - -#define POLL_DEMAND 1 - -#define LOST_MEDIA_THRESHOLD 3 - -#define MASK_INTERRUPTS 1 -#define UNMASK_INTERRUPTS 0 - -#define DE4X5_STRLEN 8 - -#define DE4X5_INIT 0 /* Initialisation time */ -#define DE4X5_RUN 1 /* Run time */ - -#define DE4X5_SAVE_STATE 0 -#define DE4X5_RESTORE_STATE 1 - -/* -** Address Filtering Modes -*/ -#define PERFECT 0 /* 16 perfect physical addresses */ -#define HASH_PERF 1 /* 1 perfect, 512 multicast addresses */ -#define PERFECT_REJ 2 /* Reject 16 perfect physical addresses */ -#define ALL_HASH 3 /* Hashes all physical & multicast addrs */ - -#define ALL 0 /* Clear out all the setup frame */ -#define PHYS_ADDR_ONLY 1 /* Update the physical address only */ - -/* -** Adapter state -*/ -#define INITIALISED 0 /* After h/w initialised and mem alloc'd */ -#define CLOSED 1 /* Ready for opening */ -#define OPEN 2 /* Running */ - -/* -** Various wait times -*/ -#define PDET_LINK_WAIT 1200 /* msecs to wait for link detect bits */ -#define ANS_FINISH_WAIT 1000 /* msecs to wait for link detect bits */ - -/* -** IEEE OUIs for various PHY vendor/chip combos - Reg 2 values only. Since -** the vendors seem split 50-50 on how to calculate the OUI register values -** anyway, just reading Reg2 seems reasonable for now [see de4x5_get_oui()]. -*/ -#define NATIONAL_TX 0x2000 -#define BROADCOM_T4 0x03e0 -#define SEEQ_T4 0x0016 -#define CYPRESS_T4 0x0014 - -/* -** Speed Selection stuff -*/ -#define SET_10Mb {\ - if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\ - omr = inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX);\ - if ((lp->tmp != MII_SR_ASSC) || (lp->autosense != AUTO)) {\ - mii_wr(MII_CR_10|(lp->fdx?MII_CR_FDM:0), MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\ - }\ - omr |= ((lp->fdx ? OMR_FDX : 0) | OMR_TTM);\ - outl(omr, DE4X5_OMR);\ - if (!lp->useSROM) lp->cache.gep = 0;\ - } else if (lp->useSROM && !lp->useMII) {\ - omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\ - omr |= (lp->fdx ? OMR_FDX : 0);\ - outl(omr | (lp->infoblock_csr6 & ~(OMR_SCR | OMR_HBD)), DE4X5_OMR);\ - } else {\ - omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\ - omr |= (lp->fdx ? OMR_FDX : 0);\ - outl(omr | OMR_SDP | OMR_TTM, DE4X5_OMR);\ - lp->cache.gep = (lp->fdx ? 0 : GEP_FDXD);\ - gep_wr(lp->cache.gep, dev);\ - }\ -} - -#define SET_100Mb {\ - if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\ - int fdx=0;\ - if (lp->phy[lp->active].id == NATIONAL_TX) {\ - mii_wr(mii_rd(0x18, lp->phy[lp->active].addr, DE4X5_MII) & ~0x2000,\ - 0x18, lp->phy[lp->active].addr, DE4X5_MII);\ - }\ - omr = inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX);\ - sr = mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);\ - if (!(sr & MII_ANA_T4AM) && lp->fdx) fdx=1;\ - if ((lp->tmp != MII_SR_ASSC) || (lp->autosense != AUTO)) {\ - mii_wr(MII_CR_100|(fdx?MII_CR_FDM:0), MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\ - }\ - if (fdx) omr |= OMR_FDX;\ - outl(omr, DE4X5_OMR);\ - if (!lp->useSROM) lp->cache.gep = 0;\ - } else if (lp->useSROM && !lp->useMII) {\ - omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\ - omr |= (lp->fdx ? OMR_FDX : 0);\ - outl(omr | lp->infoblock_csr6, DE4X5_OMR);\ - } else {\ - omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\ - omr |= (lp->fdx ? OMR_FDX : 0);\ - outl(omr | OMR_SDP | OMR_PS | OMR_HBD | OMR_PCS | OMR_SCR, DE4X5_OMR);\ - lp->cache.gep = (lp->fdx ? 0 : GEP_FDXD) | GEP_MODE;\ - gep_wr(lp->cache.gep, dev);\ - }\ -} - -/* FIX ME so I don't jam 10Mb networks */ -#define SET_100Mb_PDET {\ - if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\ - mii_wr(MII_CR_100|MII_CR_ASSE, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\ - omr = (inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\ - outl(omr, DE4X5_OMR);\ - } else if (lp->useSROM && !lp->useMII) {\ - omr = (inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\ - outl(omr, DE4X5_OMR);\ - } else {\ - omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\ - outl(omr | OMR_SDP | OMR_PS | OMR_HBD | OMR_PCS, DE4X5_OMR);\ - lp->cache.gep = (GEP_FDXD | GEP_MODE);\ - gep_wr(lp->cache.gep, dev);\ - }\ -} - -/* -** Include the IOCTL stuff -*/ -#include <linux/sockios.h> - -#define DE4X5IOCTL SIOCDEVPRIVATE - -struct de4x5_ioctl { - unsigned short cmd; /* Command to run */ - unsigned short len; /* Length of the data buffer */ - unsigned char __user *data; /* Pointer to the data buffer */ -}; - -/* -** Recognised commands for the driver -*/ -#define DE4X5_GET_HWADDR 0x01 /* Get the hardware address */ -#define DE4X5_SET_HWADDR 0x02 /* Set the hardware address */ -/* 0x03 and 0x04 were used before and are obsoleted now. Don't use them. */ -#define DE4X5_SAY_BOO 0x05 /* Say "Boo!" to the kernel log file */ -#define DE4X5_GET_MCA 0x06 /* Get a multicast address */ -#define DE4X5_SET_MCA 0x07 /* Set a multicast address */ -#define DE4X5_CLR_MCA 0x08 /* Clear a multicast address */ -#define DE4X5_MCA_EN 0x09 /* Enable a multicast address group */ -#define DE4X5_GET_STATS 0x0a /* Get the driver statistics */ -#define DE4X5_CLR_STATS 0x0b /* Zero out the driver statistics */ -#define DE4X5_GET_OMR 0x0c /* Get the OMR Register contents */ -#define DE4X5_SET_OMR 0x0d /* Set the OMR Register contents */ -#define DE4X5_GET_REG 0x0e /* Get the DE4X5 Registers */ - -#define MOTO_SROM_BUG (lp->active == 8 && (get_unaligned_le32(dev->dev_addr) & 0x00ffffff) == 0x3e0008) diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c deleted file mode 100644 index a9f7d5d1a26..00000000000 --- a/drivers/net/tulip/dmfe.c +++ /dev/null @@ -1,2258 +0,0 @@ -/* - A Davicom DM9102/DM9102A/DM9102A+DM9801/DM9102A+DM9802 NIC fast - ethernet driver for Linux. - Copyright (C) 1997 Sten Wang - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - as published by the Free Software Foundation; either version 2 - of the License, or (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - DAVICOM Web-Site: www.davicom.com.tw - - Author: Sten Wang, 886-3-5798797-8517, E-mail: sten_wang@davicom.com.tw - Maintainer: Tobias Ringstrom <tori@unhappy.mine.nu> - - (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved. - - Marcelo Tosatti <marcelo@conectiva.com.br> : - Made it compile in 2.3 (device to net_device) - - Alan Cox <alan@lxorguk.ukuu.org.uk> : - Cleaned up for kernel merge. - Removed the back compatibility support - Reformatted, fixing spelling etc as I went - Removed IRQ 0-15 assumption - - Jeff Garzik <jgarzik@pobox.com> : - Updated to use new PCI driver API. - Resource usage cleanups. - Report driver version to user. - - Tobias Ringstrom <tori@unhappy.mine.nu> : - Cleaned up and added SMP safety. Thanks go to Jeff Garzik, - Andrew Morton and Frank Davis for the SMP safety fixes. - - Vojtech Pavlik <vojtech@suse.cz> : - Cleaned up pointer arithmetics. - Fixed a lot of 64bit issues. - Cleaned up printk()s a bit. - Fixed some obvious big endian problems. - - Tobias Ringstrom <tori@unhappy.mine.nu> : - Use time_after for jiffies calculation. Added ethtool - support. Updated PCI resource allocation. Do not - forget to unmap PCI mapped skbs. - - Alan Cox <alan@lxorguk.ukuu.org.uk> - Added new PCI identifiers provided by Clear Zhang at ALi - for their 1563 ethernet device. - - TODO - - Check on 64 bit boxes. - Check and fix on big endian boxes. - - Test and make sure PCI latency is now correct for all cases. -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#define DRV_NAME "dmfe" -#define DRV_VERSION "1.36.4" -#define DRV_RELDATE "2002-01-17" - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/ptrace.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/ethtool.h> -#include <linux/skbuff.h> -#include <linux/delay.h> -#include <linux/spinlock.h> -#include <linux/crc32.h> -#include <linux/bitops.h> - -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/dma.h> -#include <asm/uaccess.h> -#include <asm/irq.h> - -#ifdef CONFIG_TULIP_DM910X -#include <linux/of.h> -#endif - - -/* Board/System/Debug information/definition ---------------- */ -#define PCI_DM9132_ID 0x91321282 /* Davicom DM9132 ID */ -#define PCI_DM9102_ID 0x91021282 /* Davicom DM9102 ID */ -#define PCI_DM9100_ID 0x91001282 /* Davicom DM9100 ID */ -#define PCI_DM9009_ID 0x90091282 /* Davicom DM9009 ID */ - -#define DM9102_IO_SIZE 0x80 -#define DM9102A_IO_SIZE 0x100 -#define TX_MAX_SEND_CNT 0x1 /* Maximum tx packet per time */ -#define TX_DESC_CNT 0x10 /* Allocated Tx descriptors */ -#define RX_DESC_CNT 0x20 /* Allocated Rx descriptors */ -#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */ -#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */ -#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT) -#define TX_BUF_ALLOC 0x600 -#define RX_ALLOC_SIZE 0x620 -#define DM910X_RESET 1 -#define CR0_DEFAULT 0x00E00000 /* TX & RX burst mode */ -#define CR6_DEFAULT 0x00080000 /* HD */ -#define CR7_DEFAULT 0x180c1 -#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */ -#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */ -#define MAX_PACKET_SIZE 1514 -#define DMFE_MAX_MULTICAST 14 -#define RX_COPY_SIZE 100 -#define MAX_CHECK_PACKET 0x8000 -#define DM9801_NOISE_FLOOR 8 -#define DM9802_NOISE_FLOOR 5 - -#define DMFE_WOL_LINKCHANGE 0x20000000 -#define DMFE_WOL_SAMPLEPACKET 0x10000000 -#define DMFE_WOL_MAGICPACKET 0x08000000 - - -#define DMFE_10MHF 0 -#define DMFE_100MHF 1 -#define DMFE_10MFD 4 -#define DMFE_100MFD 5 -#define DMFE_AUTO 8 -#define DMFE_1M_HPNA 0x10 - -#define DMFE_TXTH_72 0x400000 /* TX TH 72 byte */ -#define DMFE_TXTH_96 0x404000 /* TX TH 96 byte */ -#define DMFE_TXTH_128 0x0000 /* TX TH 128 byte */ -#define DMFE_TXTH_256 0x4000 /* TX TH 256 byte */ -#define DMFE_TXTH_512 0x8000 /* TX TH 512 byte */ -#define DMFE_TXTH_1K 0xC000 /* TX TH 1K byte */ - -#define DMFE_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */ -#define DMFE_TX_TIMEOUT ((3*HZ)/2) /* tx packet time-out time 1.5 s" */ -#define DMFE_TX_KICK (HZ/2) /* tx packet Kick-out time 0.5 s" */ - -#define DMFE_DBUG(dbug_now, msg, value) \ - do { \ - if (dmfe_debug || (dbug_now)) \ - pr_err("%s %lx\n", \ - (msg), (long) (value)); \ - } while (0) - -#define SHOW_MEDIA_TYPE(mode) \ - pr_info("Change Speed to %sMhz %s duplex\n" , \ - (mode & 1) ? "100":"10", \ - (mode & 4) ? "full":"half"); - - -/* CR9 definition: SROM/MII */ -#define CR9_SROM_READ 0x4800 -#define CR9_SRCS 0x1 -#define CR9_SRCLK 0x2 -#define CR9_CRDOUT 0x8 -#define SROM_DATA_0 0x0 -#define SROM_DATA_1 0x4 -#define PHY_DATA_1 0x20000 -#define PHY_DATA_0 0x00000 -#define MDCLKH 0x10000 - -#define PHY_POWER_DOWN 0x800 - -#define SROM_V41_CODE 0x14 - -#define SROM_CLK_WRITE(data, ioaddr) \ - outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ - udelay(5); \ - outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \ - udelay(5); \ - outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ - udelay(5); - -#define __CHK_IO_SIZE(pci_id, dev_rev) \ - (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x30) ) ? \ - DM9102A_IO_SIZE: DM9102_IO_SIZE) - -#define CHK_IO_SIZE(pci_dev) \ - (__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, \ - (pci_dev)->revision)) - -/* Sten Check */ -#define DEVICE net_device - -/* Structure/enum declaration ------------------------------- */ -struct tx_desc { - __le32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */ - char *tx_buf_ptr; /* Data for us */ - struct tx_desc *next_tx_desc; -} __attribute__(( aligned(32) )); - -struct rx_desc { - __le32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */ - struct sk_buff *rx_skb_ptr; /* Data for us */ - struct rx_desc *next_rx_desc; -} __attribute__(( aligned(32) )); - -struct dmfe_board_info { - u32 chip_id; /* Chip vendor/Device ID */ - u8 chip_revision; /* Chip revision */ - struct DEVICE *next_dev; /* next device */ - struct pci_dev *pdev; /* PCI device */ - spinlock_t lock; - - long ioaddr; /* I/O base address */ - u32 cr0_data; - u32 cr5_data; - u32 cr6_data; - u32 cr7_data; - u32 cr15_data; - - /* pointer for memory physical address */ - dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */ - dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */ - dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */ - dma_addr_t first_tx_desc_dma; - dma_addr_t first_rx_desc_dma; - - /* descriptor pointer */ - unsigned char *buf_pool_ptr; /* Tx buffer pool memory */ - unsigned char *buf_pool_start; /* Tx buffer pool align dword */ - unsigned char *desc_pool_ptr; /* descriptor pool memory */ - struct tx_desc *first_tx_desc; - struct tx_desc *tx_insert_ptr; - struct tx_desc *tx_remove_ptr; - struct rx_desc *first_rx_desc; - struct rx_desc *rx_insert_ptr; - struct rx_desc *rx_ready_ptr; /* packet come pointer */ - unsigned long tx_packet_cnt; /* transmitted packet count */ - unsigned long tx_queue_cnt; /* wait to send packet count */ - unsigned long rx_avail_cnt; /* available rx descriptor count */ - unsigned long interval_rx_cnt; /* rx packet count a callback time */ - - u16 HPNA_command; /* For HPNA register 16 */ - u16 HPNA_timer; /* For HPNA remote device check */ - u16 dbug_cnt; - u16 NIC_capability; /* NIC media capability */ - u16 PHY_reg4; /* Saved Phyxcer register 4 value */ - - u8 HPNA_present; /* 0:none, 1:DM9801, 2:DM9802 */ - u8 chip_type; /* Keep DM9102A chip type */ - u8 media_mode; /* user specify media mode */ - u8 op_mode; /* real work media mode */ - u8 phy_addr; - u8 wait_reset; /* Hardware failed, need to reset */ - u8 dm910x_chk_mode; /* Operating mode check */ - u8 first_in_callback; /* Flag to record state */ - u8 wol_mode; /* user WOL settings */ - struct timer_list timer; - - /* Driver defined statistic counter */ - unsigned long tx_fifo_underrun; - unsigned long tx_loss_carrier; - unsigned long tx_no_carrier; - unsigned long tx_late_collision; - unsigned long tx_excessive_collision; - unsigned long tx_jabber_timeout; - unsigned long reset_count; - unsigned long reset_cr8; - unsigned long reset_fatal; - unsigned long reset_TXtimeout; - - /* NIC SROM data */ - unsigned char srom[128]; -}; - -enum dmfe_offsets { - DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20, - DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48, - DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70, - DCR15 = 0x78 -}; - -enum dmfe_CR6_bits { - CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80, - CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000, - CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000 -}; - -/* Global variable declaration ----------------------------- */ -static int __devinitdata printed_version; -static const char version[] __devinitconst = - KERN_INFO DRV_NAME ": Davicom DM9xxx net driver, version " - DRV_VERSION " (" DRV_RELDATE ")\n"; - -static int dmfe_debug; -static unsigned char dmfe_media_mode = DMFE_AUTO; -static u32 dmfe_cr6_user_set; - -/* For module input parameter */ -static int debug; -static u32 cr6set; -static unsigned char mode = 8; -static u8 chkmode = 1; -static u8 HPNA_mode; /* Default: Low Power/High Speed */ -static u8 HPNA_rx_cmd; /* Default: Disable Rx remote command */ -static u8 HPNA_tx_cmd; /* Default: Don't issue remote command */ -static u8 HPNA_NoiseFloor; /* Default: HPNA NoiseFloor */ -static u8 SF_mode; /* Special Function: 1:VLAN, 2:RX Flow Control - 4: TX pause packet */ - - -/* function declaration ------------------------------------- */ -static int dmfe_open(struct DEVICE *); -static netdev_tx_t dmfe_start_xmit(struct sk_buff *, struct DEVICE *); -static int dmfe_stop(struct DEVICE *); -static void dmfe_set_filter_mode(struct DEVICE *); -static const struct ethtool_ops netdev_ethtool_ops; -static u16 read_srom_word(long ,int); -static irqreturn_t dmfe_interrupt(int , void *); -#ifdef CONFIG_NET_POLL_CONTROLLER -static void poll_dmfe (struct net_device *dev); -#endif -static void dmfe_descriptor_init(struct dmfe_board_info *, unsigned long); -static void allocate_rx_buffer(struct dmfe_board_info *); -static void update_cr6(u32, unsigned long); -static void send_filter_frame(struct DEVICE *); -static void dm9132_id_table(struct DEVICE *); -static u16 phy_read(unsigned long, u8, u8, u32); -static void phy_write(unsigned long, u8, u8, u16, u32); -static void phy_write_1bit(unsigned long, u32); -static u16 phy_read_1bit(unsigned long); -static u8 dmfe_sense_speed(struct dmfe_board_info *); -static void dmfe_process_mode(struct dmfe_board_info *); -static void dmfe_timer(unsigned long); -static inline u32 cal_CRC(unsigned char *, unsigned int, u8); -static void dmfe_rx_packet(struct DEVICE *, struct dmfe_board_info *); -static void dmfe_free_tx_pkt(struct DEVICE *, struct dmfe_board_info *); -static void dmfe_reuse_skb(struct dmfe_board_info *, struct sk_buff *); -static void dmfe_dynamic_reset(struct DEVICE *); -static void dmfe_free_rxbuffer(struct dmfe_board_info *); -static void dmfe_init_dm910x(struct DEVICE *); -static void dmfe_parse_srom(struct dmfe_board_info *); -static void dmfe_program_DM9801(struct dmfe_board_info *, int); -static void dmfe_program_DM9802(struct dmfe_board_info *); -static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * ); -static void dmfe_set_phyxcer(struct dmfe_board_info *); - -/* DM910X network board routine ---------------------------- */ - -static const struct net_device_ops netdev_ops = { - .ndo_open = dmfe_open, - .ndo_stop = dmfe_stop, - .ndo_start_xmit = dmfe_start_xmit, - .ndo_set_multicast_list = dmfe_set_filter_mode, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = poll_dmfe, -#endif -}; - -/* - * Search DM910X board ,allocate space and register it - */ - -static int __devinit dmfe_init_one (struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct dmfe_board_info *db; /* board information structure */ - struct net_device *dev; - u32 pci_pmr; - int i, err; - - DMFE_DBUG(0, "dmfe_init_one()", 0); - - if (!printed_version++) - printk(version); - - /* - * SPARC on-board DM910x chips should be handled by the main - * tulip driver, except for early DM9100s. - */ -#ifdef CONFIG_TULIP_DM910X - if ((ent->driver_data == PCI_DM9100_ID && pdev->revision >= 0x30) || - ent->driver_data == PCI_DM9102_ID) { - struct device_node *dp = pci_device_to_OF_node(pdev); - - if (dp && of_get_property(dp, "local-mac-address", NULL)) { - pr_info("skipping on-board DM910x (use tulip)\n"); - return -ENODEV; - } - } -#endif - - /* Init network device */ - dev = alloc_etherdev(sizeof(*db)); - if (dev == NULL) - return -ENOMEM; - SET_NETDEV_DEV(dev, &pdev->dev); - - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { - pr_warning("32-bit PCI DMA not available\n"); - err = -ENODEV; - goto err_out_free; - } - - /* Enable Master/IO access, Disable memory access */ - err = pci_enable_device(pdev); - if (err) - goto err_out_free; - - if (!pci_resource_start(pdev, 0)) { - pr_err("I/O base is zero\n"); - err = -ENODEV; - goto err_out_disable; - } - - if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev)) ) { - pr_err("Allocated I/O size too small\n"); - err = -ENODEV; - goto err_out_disable; - } - -#if 0 /* pci_{enable_device,set_master} sets minimum latency for us now */ - - /* Set Latency Timer 80h */ - /* FIXME: setting values > 32 breaks some SiS 559x stuff. - Need a PCI quirk.. */ - - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80); -#endif - - if (pci_request_regions(pdev, DRV_NAME)) { - pr_err("Failed to request PCI regions\n"); - err = -ENODEV; - goto err_out_disable; - } - - /* Init system & device */ - db = netdev_priv(dev); - - /* Allocate Tx/Rx descriptor memory */ - db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * - DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); - if (!db->desc_pool_ptr) - goto err_out_res; - - db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * - TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); - if (!db->buf_pool_ptr) - goto err_out_free_desc; - - db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; - db->first_tx_desc_dma = db->desc_pool_dma_ptr; - db->buf_pool_start = db->buf_pool_ptr; - db->buf_pool_dma_start = db->buf_pool_dma_ptr; - - db->chip_id = ent->driver_data; - db->ioaddr = pci_resource_start(pdev, 0); - db->chip_revision = pdev->revision; - db->wol_mode = 0; - - db->pdev = pdev; - - dev->base_addr = db->ioaddr; - dev->irq = pdev->irq; - pci_set_drvdata(pdev, dev); - dev->netdev_ops = &netdev_ops; - dev->ethtool_ops = &netdev_ethtool_ops; - netif_carrier_off(dev); - spin_lock_init(&db->lock); - - pci_read_config_dword(pdev, 0x50, &pci_pmr); - pci_pmr &= 0x70000; - if ( (pci_pmr == 0x10000) && (db->chip_revision == 0x31) ) - db->chip_type = 1; /* DM9102A E3 */ - else - db->chip_type = 0; - - /* read 64 word srom data */ - for (i = 0; i < 64; i++) - ((__le16 *) db->srom)[i] = - cpu_to_le16(read_srom_word(db->ioaddr, i)); - - /* Set Node address */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = db->srom[20 + i]; - - err = register_netdev (dev); - if (err) - goto err_out_free_buf; - - dev_info(&dev->dev, "Davicom DM%04lx at pci%s, %pM, irq %d\n", - ent->driver_data >> 16, - pci_name(pdev), dev->dev_addr, dev->irq); - - pci_set_master(pdev); - - return 0; - -err_out_free_buf: - pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, - db->buf_pool_ptr, db->buf_pool_dma_ptr); -err_out_free_desc: - pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, - db->desc_pool_ptr, db->desc_pool_dma_ptr); -err_out_res: - pci_release_regions(pdev); -err_out_disable: - pci_disable_device(pdev); -err_out_free: - pci_set_drvdata(pdev, NULL); - free_netdev(dev); - - return err; -} - - -static void __devexit dmfe_remove_one (struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct dmfe_board_info *db = netdev_priv(dev); - - DMFE_DBUG(0, "dmfe_remove_one()", 0); - - if (dev) { - - unregister_netdev(dev); - - pci_free_consistent(db->pdev, sizeof(struct tx_desc) * - DESC_ALL_CNT + 0x20, db->desc_pool_ptr, - db->desc_pool_dma_ptr); - pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, - db->buf_pool_ptr, db->buf_pool_dma_ptr); - pci_release_regions(pdev); - free_netdev(dev); /* free board information */ - - pci_set_drvdata(pdev, NULL); - } - - DMFE_DBUG(0, "dmfe_remove_one() exit", 0); -} - - -/* - * Open the interface. - * The interface is opened whenever "ifconfig" actives it. - */ - -static int dmfe_open(struct DEVICE *dev) -{ - int ret; - struct dmfe_board_info *db = netdev_priv(dev); - - DMFE_DBUG(0, "dmfe_open", 0); - - ret = request_irq(dev->irq, dmfe_interrupt, - IRQF_SHARED, dev->name, dev); - if (ret) - return ret; - - /* system variable init */ - db->cr6_data = CR6_DEFAULT | dmfe_cr6_user_set; - db->tx_packet_cnt = 0; - db->tx_queue_cnt = 0; - db->rx_avail_cnt = 0; - db->wait_reset = 0; - - db->first_in_callback = 0; - db->NIC_capability = 0xf; /* All capability*/ - db->PHY_reg4 = 0x1e0; - - /* CR6 operation mode decision */ - if ( !chkmode || (db->chip_id == PCI_DM9132_ID) || - (db->chip_revision >= 0x30) ) { - db->cr6_data |= DMFE_TXTH_256; - db->cr0_data = CR0_DEFAULT; - db->dm910x_chk_mode=4; /* Enter the normal mode */ - } else { - db->cr6_data |= CR6_SFT; /* Store & Forward mode */ - db->cr0_data = 0; - db->dm910x_chk_mode = 1; /* Enter the check mode */ - } - - /* Initialize DM910X board */ - dmfe_init_dm910x(dev); - - /* Active System Interface */ - netif_wake_queue(dev); - - /* set and active a timer process */ - init_timer(&db->timer); - db->timer.expires = DMFE_TIMER_WUT + HZ * 2; - db->timer.data = (unsigned long)dev; - db->timer.function = dmfe_timer; - add_timer(&db->timer); - - return 0; -} - - -/* Initialize DM910X board - * Reset DM910X board - * Initialize TX/Rx descriptor chain structure - * Send the set-up frame - * Enable Tx/Rx machine - */ - -static void dmfe_init_dm910x(struct DEVICE *dev) -{ - struct dmfe_board_info *db = netdev_priv(dev); - unsigned long ioaddr = db->ioaddr; - - DMFE_DBUG(0, "dmfe_init_dm910x()", 0); - - /* Reset DM910x MAC controller */ - outl(DM910X_RESET, ioaddr + DCR0); /* RESET MAC */ - udelay(100); - outl(db->cr0_data, ioaddr + DCR0); - udelay(5); - - /* Phy addr : DM910(A)2/DM9132/9801, phy address = 1 */ - db->phy_addr = 1; - - /* Parser SROM and media mode */ - dmfe_parse_srom(db); - db->media_mode = dmfe_media_mode; - - /* RESET Phyxcer Chip by GPR port bit 7 */ - outl(0x180, ioaddr + DCR12); /* Let bit 7 output port */ - if (db->chip_id == PCI_DM9009_ID) { - outl(0x80, ioaddr + DCR12); /* Issue RESET signal */ - mdelay(300); /* Delay 300 ms */ - } - outl(0x0, ioaddr + DCR12); /* Clear RESET signal */ - - /* Process Phyxcer Media Mode */ - if ( !(db->media_mode & 0x10) ) /* Force 1M mode */ - dmfe_set_phyxcer(db); - - /* Media Mode Process */ - if ( !(db->media_mode & DMFE_AUTO) ) - db->op_mode = db->media_mode; /* Force Mode */ - - /* Initialize Transmit/Receive decriptor and CR3/4 */ - dmfe_descriptor_init(db, ioaddr); - - /* Init CR6 to program DM910x operation */ - update_cr6(db->cr6_data, ioaddr); - - /* Send setup frame */ - if (db->chip_id == PCI_DM9132_ID) - dm9132_id_table(dev); /* DM9132 */ - else - send_filter_frame(dev); /* DM9102/DM9102A */ - - /* Init CR7, interrupt active bit */ - db->cr7_data = CR7_DEFAULT; - outl(db->cr7_data, ioaddr + DCR7); - - /* Init CR15, Tx jabber and Rx watchdog timer */ - outl(db->cr15_data, ioaddr + DCR15); - - /* Enable DM910X Tx/Rx function */ - db->cr6_data |= CR6_RXSC | CR6_TXSC | 0x40000; - update_cr6(db->cr6_data, ioaddr); -} - - -/* - * Hardware start transmission. - * Send a packet to media from the upper layer. - */ - -static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb, - struct DEVICE *dev) -{ - struct dmfe_board_info *db = netdev_priv(dev); - struct tx_desc *txptr; - unsigned long flags; - - DMFE_DBUG(0, "dmfe_start_xmit", 0); - - /* Resource flag check */ - netif_stop_queue(dev); - - /* Too large packet check */ - if (skb->len > MAX_PACKET_SIZE) { - pr_err("big packet = %d\n", (u16)skb->len); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } - - spin_lock_irqsave(&db->lock, flags); - - /* No Tx resource check, it never happen nromally */ - if (db->tx_queue_cnt >= TX_FREE_DESC_CNT) { - spin_unlock_irqrestore(&db->lock, flags); - pr_err("No Tx resource %ld\n", db->tx_queue_cnt); - return NETDEV_TX_BUSY; - } - - /* Disable NIC interrupt */ - outl(0, dev->base_addr + DCR7); - - /* transmit this packet */ - txptr = db->tx_insert_ptr; - skb_copy_from_linear_data(skb, txptr->tx_buf_ptr, skb->len); - txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len); - - /* Point to next transmit free descriptor */ - db->tx_insert_ptr = txptr->next_tx_desc; - - /* Transmit Packet Process */ - if ( (!db->tx_queue_cnt) && (db->tx_packet_cnt < TX_MAX_SEND_CNT) ) { - txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ - db->tx_packet_cnt++; /* Ready to send */ - outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ - dev->trans_start = jiffies; /* saved time stamp */ - } else { - db->tx_queue_cnt++; /* queue TX packet */ - outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ - } - - /* Tx resource check */ - if ( db->tx_queue_cnt < TX_FREE_DESC_CNT ) - netif_wake_queue(dev); - - /* Restore CR7 to enable interrupt */ - spin_unlock_irqrestore(&db->lock, flags); - outl(db->cr7_data, dev->base_addr + DCR7); - - /* free this SKB */ - dev_kfree_skb(skb); - - return NETDEV_TX_OK; -} - - -/* - * Stop the interface. - * The interface is stopped when it is brought. - */ - -static int dmfe_stop(struct DEVICE *dev) -{ - struct dmfe_board_info *db = netdev_priv(dev); - unsigned long ioaddr = dev->base_addr; - - DMFE_DBUG(0, "dmfe_stop", 0); - - /* disable system */ - netif_stop_queue(dev); - - /* deleted timer */ - del_timer_sync(&db->timer); - - /* Reset & stop DM910X board */ - outl(DM910X_RESET, ioaddr + DCR0); - udelay(5); - phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); - - /* free interrupt */ - free_irq(dev->irq, dev); - - /* free allocated rx buffer */ - dmfe_free_rxbuffer(db); - -#if 0 - /* show statistic counter */ - printk("FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n", - db->tx_fifo_underrun, db->tx_excessive_collision, - db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier, - db->tx_jabber_timeout, db->reset_count, db->reset_cr8, - db->reset_fatal, db->reset_TXtimeout); -#endif - - return 0; -} - - -/* - * DM9102 insterrupt handler - * receive the packet to upper layer, free the transmitted packet - */ - -static irqreturn_t dmfe_interrupt(int irq, void *dev_id) -{ - struct DEVICE *dev = dev_id; - struct dmfe_board_info *db = netdev_priv(dev); - unsigned long ioaddr = dev->base_addr; - unsigned long flags; - - DMFE_DBUG(0, "dmfe_interrupt()", 0); - - spin_lock_irqsave(&db->lock, flags); - - /* Got DM910X status */ - db->cr5_data = inl(ioaddr + DCR5); - outl(db->cr5_data, ioaddr + DCR5); - if ( !(db->cr5_data & 0xc1) ) { - spin_unlock_irqrestore(&db->lock, flags); - return IRQ_HANDLED; - } - - /* Disable all interrupt in CR7 to solve the interrupt edge problem */ - outl(0, ioaddr + DCR7); - - /* Check system status */ - if (db->cr5_data & 0x2000) { - /* system bus error happen */ - DMFE_DBUG(1, "System bus error happen. CR5=", db->cr5_data); - db->reset_fatal++; - db->wait_reset = 1; /* Need to RESET */ - spin_unlock_irqrestore(&db->lock, flags); - return IRQ_HANDLED; - } - - /* Received the coming packet */ - if ( (db->cr5_data & 0x40) && db->rx_avail_cnt ) - dmfe_rx_packet(dev, db); - - /* reallocate rx descriptor buffer */ - if (db->rx_avail_cnt<RX_DESC_CNT) - allocate_rx_buffer(db); - - /* Free the transmitted descriptor */ - if ( db->cr5_data & 0x01) - dmfe_free_tx_pkt(dev, db); - - /* Mode Check */ - if (db->dm910x_chk_mode & 0x2) { - db->dm910x_chk_mode = 0x4; - db->cr6_data |= 0x100; - update_cr6(db->cr6_data, db->ioaddr); - } - - /* Restore CR7 to enable interrupt mask */ - outl(db->cr7_data, ioaddr + DCR7); - - spin_unlock_irqrestore(&db->lock, flags); - return IRQ_HANDLED; -} - - -#ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling 'interrupt' - used by things like netconsole to send skbs - * without having to re-enable interrupts. It's not called while - * the interrupt routine is executing. - */ - -static void poll_dmfe (struct net_device *dev) -{ - /* disable_irq here is not very nice, but with the lockless - interrupt handler we have no other choice. */ - disable_irq(dev->irq); - dmfe_interrupt (dev->irq, dev); - enable_irq(dev->irq); -} -#endif - -/* - * Free TX resource after TX complete - */ - -static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db) -{ - struct tx_desc *txptr; - unsigned long ioaddr = dev->base_addr; - u32 tdes0; - - txptr = db->tx_remove_ptr; - while(db->tx_packet_cnt) { - tdes0 = le32_to_cpu(txptr->tdes0); - pr_debug("tdes0=%x\n", tdes0); - if (tdes0 & 0x80000000) - break; - - /* A packet sent completed */ - db->tx_packet_cnt--; - dev->stats.tx_packets++; - - /* Transmit statistic counter */ - if ( tdes0 != 0x7fffffff ) { - pr_debug("tdes0=%x\n", tdes0); - dev->stats.collisions += (tdes0 >> 3) & 0xf; - dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff; - if (tdes0 & TDES0_ERR_MASK) { - dev->stats.tx_errors++; - - if (tdes0 & 0x0002) { /* UnderRun */ - db->tx_fifo_underrun++; - if ( !(db->cr6_data & CR6_SFT) ) { - db->cr6_data = db->cr6_data | CR6_SFT; - update_cr6(db->cr6_data, db->ioaddr); - } - } - if (tdes0 & 0x0100) - db->tx_excessive_collision++; - if (tdes0 & 0x0200) - db->tx_late_collision++; - if (tdes0 & 0x0400) - db->tx_no_carrier++; - if (tdes0 & 0x0800) - db->tx_loss_carrier++; - if (tdes0 & 0x4000) - db->tx_jabber_timeout++; - } - } - - txptr = txptr->next_tx_desc; - }/* End of while */ - - /* Update TX remove pointer to next */ - db->tx_remove_ptr = txptr; - - /* Send the Tx packet in queue */ - if ( (db->tx_packet_cnt < TX_MAX_SEND_CNT) && db->tx_queue_cnt ) { - txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ - db->tx_packet_cnt++; /* Ready to send */ - db->tx_queue_cnt--; - outl(0x1, ioaddr + DCR1); /* Issue Tx polling */ - dev->trans_start = jiffies; /* saved time stamp */ - } - - /* Resource available check */ - if ( db->tx_queue_cnt < TX_WAKE_DESC_CNT ) - netif_wake_queue(dev); /* Active upper layer, send again */ -} - - -/* - * Calculate the CRC valude of the Rx packet - * flag = 1 : return the reverse CRC (for the received packet CRC) - * 0 : return the normal CRC (for Hash Table index) - */ - -static inline u32 cal_CRC(unsigned char * Data, unsigned int Len, u8 flag) -{ - u32 crc = crc32(~0, Data, Len); - if (flag) crc = ~crc; - return crc; -} - - -/* - * Receive the come packet and pass to upper layer - */ - -static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db) -{ - struct rx_desc *rxptr; - struct sk_buff *skb, *newskb; - int rxlen; - u32 rdes0; - - rxptr = db->rx_ready_ptr; - - while(db->rx_avail_cnt) { - rdes0 = le32_to_cpu(rxptr->rdes0); - if (rdes0 & 0x80000000) /* packet owner check */ - break; - - db->rx_avail_cnt--; - db->interval_rx_cnt++; - - pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), - RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE); - - if ( (rdes0 & 0x300) != 0x300) { - /* A packet without First/Last flag */ - /* reuse this SKB */ - DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0); - dmfe_reuse_skb(db, rxptr->rx_skb_ptr); - } else { - /* A packet with First/Last flag */ - rxlen = ( (rdes0 >> 16) & 0x3fff) - 4; - - /* error summary bit check */ - if (rdes0 & 0x8000) { - /* This is a error packet */ - pr_debug("rdes0: %x\n", rdes0); - dev->stats.rx_errors++; - if (rdes0 & 1) - dev->stats.rx_fifo_errors++; - if (rdes0 & 2) - dev->stats.rx_crc_errors++; - if (rdes0 & 0x80) - dev->stats.rx_length_errors++; - } - - if ( !(rdes0 & 0x8000) || - ((db->cr6_data & CR6_PM) && (rxlen>6)) ) { - skb = rxptr->rx_skb_ptr; - - /* Received Packet CRC check need or not */ - if ( (db->dm910x_chk_mode & 1) && - (cal_CRC(skb->data, rxlen, 1) != - (*(u32 *) (skb->data+rxlen) ))) { /* FIXME (?) */ - /* Found a error received packet */ - dmfe_reuse_skb(db, rxptr->rx_skb_ptr); - db->dm910x_chk_mode = 3; - } else { - /* Good packet, send to upper layer */ - /* Shorst packet used new SKB */ - if ((rxlen < RX_COPY_SIZE) && - ((newskb = dev_alloc_skb(rxlen + 2)) - != NULL)) { - - skb = newskb; - /* size less than COPY_SIZE, allocate a rxlen SKB */ - skb_reserve(skb, 2); /* 16byte align */ - skb_copy_from_linear_data(rxptr->rx_skb_ptr, - skb_put(skb, rxlen), - rxlen); - dmfe_reuse_skb(db, rxptr->rx_skb_ptr); - } else - skb_put(skb, rxlen); - - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += rxlen; - } - } else { - /* Reuse SKB buffer when the packet is error */ - DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0); - dmfe_reuse_skb(db, rxptr->rx_skb_ptr); - } - } - - rxptr = rxptr->next_rx_desc; - } - - db->rx_ready_ptr = rxptr; -} - -/* - * Set DM910X multicast address - */ - -static void dmfe_set_filter_mode(struct DEVICE * dev) -{ - struct dmfe_board_info *db = netdev_priv(dev); - unsigned long flags; - int mc_count = netdev_mc_count(dev); - - DMFE_DBUG(0, "dmfe_set_filter_mode()", 0); - spin_lock_irqsave(&db->lock, flags); - - if (dev->flags & IFF_PROMISC) { - DMFE_DBUG(0, "Enable PROM Mode", 0); - db->cr6_data |= CR6_PM | CR6_PBF; - update_cr6(db->cr6_data, db->ioaddr); - spin_unlock_irqrestore(&db->lock, flags); - return; - } - - if (dev->flags & IFF_ALLMULTI || mc_count > DMFE_MAX_MULTICAST) { - DMFE_DBUG(0, "Pass all multicast address", mc_count); - db->cr6_data &= ~(CR6_PM | CR6_PBF); - db->cr6_data |= CR6_PAM; - spin_unlock_irqrestore(&db->lock, flags); - return; - } - - DMFE_DBUG(0, "Set multicast address", mc_count); - if (db->chip_id == PCI_DM9132_ID) - dm9132_id_table(dev); /* DM9132 */ - else - send_filter_frame(dev); /* DM9102/DM9102A */ - spin_unlock_irqrestore(&db->lock, flags); -} - -/* - * Ethtool interace - */ - -static void dmfe_ethtool_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - struct dmfe_board_info *np = netdev_priv(dev); - - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - if (np->pdev) - strcpy(info->bus_info, pci_name(np->pdev)); - else - sprintf(info->bus_info, "EISA 0x%lx %d", - dev->base_addr, dev->irq); -} - -static int dmfe_ethtool_set_wol(struct net_device *dev, - struct ethtool_wolinfo *wolinfo) -{ - struct dmfe_board_info *db = netdev_priv(dev); - - if (wolinfo->wolopts & (WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | - WAKE_ARP | WAKE_MAGICSECURE)) - return -EOPNOTSUPP; - - db->wol_mode = wolinfo->wolopts; - return 0; -} - -static void dmfe_ethtool_get_wol(struct net_device *dev, - struct ethtool_wolinfo *wolinfo) -{ - struct dmfe_board_info *db = netdev_priv(dev); - - wolinfo->supported = WAKE_PHY | WAKE_MAGIC; - wolinfo->wolopts = db->wol_mode; -} - - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = dmfe_ethtool_get_drvinfo, - .get_link = ethtool_op_get_link, - .set_wol = dmfe_ethtool_set_wol, - .get_wol = dmfe_ethtool_get_wol, -}; - -/* - * A periodic timer routine - * Dynamic media sense, allocate Rx buffer... - */ - -static void dmfe_timer(unsigned long data) -{ - u32 tmp_cr8; - unsigned char tmp_cr12; - struct DEVICE *dev = (struct DEVICE *) data; - struct dmfe_board_info *db = netdev_priv(dev); - unsigned long flags; - - int link_ok, link_ok_phy; - - DMFE_DBUG(0, "dmfe_timer()", 0); - spin_lock_irqsave(&db->lock, flags); - - /* Media mode process when Link OK before enter this route */ - if (db->first_in_callback == 0) { - db->first_in_callback = 1; - if (db->chip_type && (db->chip_id==PCI_DM9102_ID)) { - db->cr6_data &= ~0x40000; - update_cr6(db->cr6_data, db->ioaddr); - phy_write(db->ioaddr, - db->phy_addr, 0, 0x1000, db->chip_id); - db->cr6_data |= 0x40000; - update_cr6(db->cr6_data, db->ioaddr); - db->timer.expires = DMFE_TIMER_WUT + HZ * 2; - add_timer(&db->timer); - spin_unlock_irqrestore(&db->lock, flags); - return; - } - } - - - /* Operating Mode Check */ - if ( (db->dm910x_chk_mode & 0x1) && - (dev->stats.rx_packets > MAX_CHECK_PACKET) ) - db->dm910x_chk_mode = 0x4; - - /* Dynamic reset DM910X : system error or transmit time-out */ - tmp_cr8 = inl(db->ioaddr + DCR8); - if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) { - db->reset_cr8++; - db->wait_reset = 1; - } - db->interval_rx_cnt = 0; - - /* TX polling kick monitor */ - if ( db->tx_packet_cnt && - time_after(jiffies, dev_trans_start(dev) + DMFE_TX_KICK) ) { - outl(0x1, dev->base_addr + DCR1); /* Tx polling again */ - - /* TX Timeout */ - if (time_after(jiffies, dev_trans_start(dev) + DMFE_TX_TIMEOUT) ) { - db->reset_TXtimeout++; - db->wait_reset = 1; - dev_warn(&dev->dev, "Tx timeout - resetting\n"); - } - } - - if (db->wait_reset) { - DMFE_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt); - db->reset_count++; - dmfe_dynamic_reset(dev); - db->first_in_callback = 0; - db->timer.expires = DMFE_TIMER_WUT; - add_timer(&db->timer); - spin_unlock_irqrestore(&db->lock, flags); - return; - } - - /* Link status check, Dynamic media type change */ - if (db->chip_id == PCI_DM9132_ID) - tmp_cr12 = inb(db->ioaddr + DCR9 + 3); /* DM9132 */ - else - tmp_cr12 = inb(db->ioaddr + DCR12); /* DM9102/DM9102A */ - - if ( ((db->chip_id == PCI_DM9102_ID) && - (db->chip_revision == 0x30)) || - ((db->chip_id == PCI_DM9132_ID) && - (db->chip_revision == 0x10)) ) { - /* DM9102A Chip */ - if (tmp_cr12 & 2) - link_ok = 0; - else - link_ok = 1; - } - else - /*0x43 is used instead of 0x3 because bit 6 should represent - link status of external PHY */ - link_ok = (tmp_cr12 & 0x43) ? 1 : 0; - - - /* If chip reports that link is failed it could be because external - PHY link status pin is not conected correctly to chip - To be sure ask PHY too. - */ - - /* need a dummy read because of PHY's register latch*/ - phy_read (db->ioaddr, db->phy_addr, 1, db->chip_id); - link_ok_phy = (phy_read (db->ioaddr, - db->phy_addr, 1, db->chip_id) & 0x4) ? 1 : 0; - - if (link_ok_phy != link_ok) { - DMFE_DBUG (0, "PHY and chip report different link status", 0); - link_ok = link_ok | link_ok_phy; - } - - if ( !link_ok && netif_carrier_ok(dev)) { - /* Link Failed */ - DMFE_DBUG(0, "Link Failed", tmp_cr12); - netif_carrier_off(dev); - - /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */ - /* AUTO or force 1M Homerun/Longrun don't need */ - if ( !(db->media_mode & 0x38) ) - phy_write(db->ioaddr, db->phy_addr, - 0, 0x1000, db->chip_id); - - /* AUTO mode, if INT phyxcer link failed, select EXT device */ - if (db->media_mode & DMFE_AUTO) { - /* 10/100M link failed, used 1M Home-Net */ - db->cr6_data|=0x00040000; /* bit18=1, MII */ - db->cr6_data&=~0x00000200; /* bit9=0, HD mode */ - update_cr6(db->cr6_data, db->ioaddr); - } - } else if (!netif_carrier_ok(dev)) { - - DMFE_DBUG(0, "Link link OK", tmp_cr12); - - /* Auto Sense Speed */ - if ( !(db->media_mode & DMFE_AUTO) || !dmfe_sense_speed(db)) { - netif_carrier_on(dev); - SHOW_MEDIA_TYPE(db->op_mode); - } - - dmfe_process_mode(db); - } - - /* HPNA remote command check */ - if (db->HPNA_command & 0xf00) { - db->HPNA_timer--; - if (!db->HPNA_timer) - dmfe_HPNA_remote_cmd_chk(db); - } - - /* Timer active again */ - db->timer.expires = DMFE_TIMER_WUT; - add_timer(&db->timer); - spin_unlock_irqrestore(&db->lock, flags); -} - - -/* - * Dynamic reset the DM910X board - * Stop DM910X board - * Free Tx/Rx allocated memory - * Reset DM910X board - * Re-initialize DM910X board - */ - -static void dmfe_dynamic_reset(struct DEVICE *dev) -{ - struct dmfe_board_info *db = netdev_priv(dev); - - DMFE_DBUG(0, "dmfe_dynamic_reset()", 0); - - /* Sopt MAC controller */ - db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */ - update_cr6(db->cr6_data, dev->base_addr); - outl(0, dev->base_addr + DCR7); /* Disable Interrupt */ - outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5); - - /* Disable upper layer interface */ - netif_stop_queue(dev); - - /* Free Rx Allocate buffer */ - dmfe_free_rxbuffer(db); - - /* system variable init */ - db->tx_packet_cnt = 0; - db->tx_queue_cnt = 0; - db->rx_avail_cnt = 0; - netif_carrier_off(dev); - db->wait_reset = 0; - - /* Re-initialize DM910X board */ - dmfe_init_dm910x(dev); - - /* Restart upper layer interface */ - netif_wake_queue(dev); -} - - -/* - * free all allocated rx buffer - */ - -static void dmfe_free_rxbuffer(struct dmfe_board_info * db) -{ - DMFE_DBUG(0, "dmfe_free_rxbuffer()", 0); - - /* free allocated rx buffer */ - while (db->rx_avail_cnt) { - dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr); - db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc; - db->rx_avail_cnt--; - } -} - - -/* - * Reuse the SK buffer - */ - -static void dmfe_reuse_skb(struct dmfe_board_info *db, struct sk_buff * skb) -{ - struct rx_desc *rxptr = db->rx_insert_ptr; - - if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) { - rxptr->rx_skb_ptr = skb; - rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, - skb->data, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); - wmb(); - rxptr->rdes0 = cpu_to_le32(0x80000000); - db->rx_avail_cnt++; - db->rx_insert_ptr = rxptr->next_rx_desc; - } else - DMFE_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt); -} - - -/* - * Initialize transmit/Receive descriptor - * Using Chain structure, and allocate Tx/Rx buffer - */ - -static void dmfe_descriptor_init(struct dmfe_board_info *db, unsigned long ioaddr) -{ - struct tx_desc *tmp_tx; - struct rx_desc *tmp_rx; - unsigned char *tmp_buf; - dma_addr_t tmp_tx_dma, tmp_rx_dma; - dma_addr_t tmp_buf_dma; - int i; - - DMFE_DBUG(0, "dmfe_descriptor_init()", 0); - - /* tx descriptor start pointer */ - db->tx_insert_ptr = db->first_tx_desc; - db->tx_remove_ptr = db->first_tx_desc; - outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */ - - /* rx descriptor start pointer */ - db->first_rx_desc = (void *)db->first_tx_desc + - sizeof(struct tx_desc) * TX_DESC_CNT; - - db->first_rx_desc_dma = db->first_tx_desc_dma + - sizeof(struct tx_desc) * TX_DESC_CNT; - db->rx_insert_ptr = db->first_rx_desc; - db->rx_ready_ptr = db->first_rx_desc; - outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */ - - /* Init Transmit chain */ - tmp_buf = db->buf_pool_start; - tmp_buf_dma = db->buf_pool_dma_start; - tmp_tx_dma = db->first_tx_desc_dma; - for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) { - tmp_tx->tx_buf_ptr = tmp_buf; - tmp_tx->tdes0 = cpu_to_le32(0); - tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */ - tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma); - tmp_tx_dma += sizeof(struct tx_desc); - tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma); - tmp_tx->next_tx_desc = tmp_tx + 1; - tmp_buf = tmp_buf + TX_BUF_ALLOC; - tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC; - } - (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma); - tmp_tx->next_tx_desc = db->first_tx_desc; - - /* Init Receive descriptor chain */ - tmp_rx_dma=db->first_rx_desc_dma; - for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) { - tmp_rx->rdes0 = cpu_to_le32(0); - tmp_rx->rdes1 = cpu_to_le32(0x01000600); - tmp_rx_dma += sizeof(struct rx_desc); - tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma); - tmp_rx->next_rx_desc = tmp_rx + 1; - } - (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma); - tmp_rx->next_rx_desc = db->first_rx_desc; - - /* pre-allocate Rx buffer */ - allocate_rx_buffer(db); -} - - -/* - * Update CR6 value - * Firstly stop DM910X , then written value and start - */ - -static void update_cr6(u32 cr6_data, unsigned long ioaddr) -{ - u32 cr6_tmp; - - cr6_tmp = cr6_data & ~0x2002; /* stop Tx/Rx */ - outl(cr6_tmp, ioaddr + DCR6); - udelay(5); - outl(cr6_data, ioaddr + DCR6); - udelay(5); -} - - -/* - * Send a setup frame for DM9132 - * This setup frame initialize DM910X address filter mode -*/ - -static void dm9132_id_table(struct DEVICE *dev) -{ - struct netdev_hw_addr *ha; - u16 * addrptr; - unsigned long ioaddr = dev->base_addr+0xc0; /* ID Table */ - u32 hash_val; - u16 i, hash_table[4]; - - DMFE_DBUG(0, "dm9132_id_table()", 0); - - /* Node address */ - addrptr = (u16 *) dev->dev_addr; - outw(addrptr[0], ioaddr); - ioaddr += 4; - outw(addrptr[1], ioaddr); - ioaddr += 4; - outw(addrptr[2], ioaddr); - ioaddr += 4; - - /* Clear Hash Table */ - memset(hash_table, 0, sizeof(hash_table)); - - /* broadcast address */ - hash_table[3] = 0x8000; - - /* the multicast address in Hash Table : 64 bits */ - netdev_for_each_mc_addr(ha, dev) { - hash_val = cal_CRC((char *) ha->addr, 6, 0) & 0x3f; - hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16); - } - - /* Write the hash table to MAC MD table */ - for (i = 0; i < 4; i++, ioaddr += 4) - outw(hash_table[i], ioaddr); -} - - -/* - * Send a setup frame for DM9102/DM9102A - * This setup frame initialize DM910X address filter mode - */ - -static void send_filter_frame(struct DEVICE *dev) -{ - struct dmfe_board_info *db = netdev_priv(dev); - struct netdev_hw_addr *ha; - struct tx_desc *txptr; - u16 * addrptr; - u32 * suptr; - int i; - - DMFE_DBUG(0, "send_filter_frame()", 0); - - txptr = db->tx_insert_ptr; - suptr = (u32 *) txptr->tx_buf_ptr; - - /* Node address */ - addrptr = (u16 *) dev->dev_addr; - *suptr++ = addrptr[0]; - *suptr++ = addrptr[1]; - *suptr++ = addrptr[2]; - - /* broadcast address */ - *suptr++ = 0xffff; - *suptr++ = 0xffff; - *suptr++ = 0xffff; - - /* fit the multicast address */ - netdev_for_each_mc_addr(ha, dev) { - addrptr = (u16 *) ha->addr; - *suptr++ = addrptr[0]; - *suptr++ = addrptr[1]; - *suptr++ = addrptr[2]; - } - - for (i = netdev_mc_count(dev); i < 14; i++) { - *suptr++ = 0xffff; - *suptr++ = 0xffff; - *suptr++ = 0xffff; - } - - /* prepare the setup frame */ - db->tx_insert_ptr = txptr->next_tx_desc; - txptr->tdes1 = cpu_to_le32(0x890000c0); - - /* Resource Check and Send the setup packet */ - if (!db->tx_packet_cnt) { - /* Resource Empty */ - db->tx_packet_cnt++; - txptr->tdes0 = cpu_to_le32(0x80000000); - update_cr6(db->cr6_data | 0x2000, dev->base_addr); - outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ - update_cr6(db->cr6_data, dev->base_addr); - dev->trans_start = jiffies; - } else - db->tx_queue_cnt++; /* Put in TX queue */ -} - - -/* - * Allocate rx buffer, - * As possible as allocate maxiumn Rx buffer - */ - -static void allocate_rx_buffer(struct dmfe_board_info *db) -{ - struct rx_desc *rxptr; - struct sk_buff *skb; - - rxptr = db->rx_insert_ptr; - - while(db->rx_avail_cnt < RX_DESC_CNT) { - if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL ) - break; - rxptr->rx_skb_ptr = skb; /* FIXME (?) */ - rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data, - RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); - wmb(); - rxptr->rdes0 = cpu_to_le32(0x80000000); - rxptr = rxptr->next_rx_desc; - db->rx_avail_cnt++; - } - - db->rx_insert_ptr = rxptr; -} - - -/* - * Read one word data from the serial ROM - */ - -static u16 read_srom_word(long ioaddr, int offset) -{ - int i; - u16 srom_data = 0; - long cr9_ioaddr = ioaddr + DCR9; - - outl(CR9_SROM_READ, cr9_ioaddr); - outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); - - /* Send the Read Command 110b */ - SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); - SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); - SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr); - - /* Send the offset */ - for (i = 5; i >= 0; i--) { - srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0; - SROM_CLK_WRITE(srom_data, cr9_ioaddr); - } - - outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); - - for (i = 16; i > 0; i--) { - outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr); - udelay(5); - srom_data = (srom_data << 1) | - ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0); - outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); - udelay(5); - } - - outl(CR9_SROM_READ, cr9_ioaddr); - return srom_data; -} - - -/* - * Auto sense the media mode - */ - -static u8 dmfe_sense_speed(struct dmfe_board_info * db) -{ - u8 ErrFlag = 0; - u16 phy_mode; - - /* CR6 bit18=0, select 10/100M */ - update_cr6( (db->cr6_data & ~0x40000), db->ioaddr); - - phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); - phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); - - if ( (phy_mode & 0x24) == 0x24 ) { - if (db->chip_id == PCI_DM9132_ID) /* DM9132 */ - phy_mode = phy_read(db->ioaddr, - db->phy_addr, 7, db->chip_id) & 0xf000; - else /* DM9102/DM9102A */ - phy_mode = phy_read(db->ioaddr, - db->phy_addr, 17, db->chip_id) & 0xf000; - pr_debug("Phy_mode %x\n", phy_mode); - switch (phy_mode) { - case 0x1000: db->op_mode = DMFE_10MHF; break; - case 0x2000: db->op_mode = DMFE_10MFD; break; - case 0x4000: db->op_mode = DMFE_100MHF; break; - case 0x8000: db->op_mode = DMFE_100MFD; break; - default: db->op_mode = DMFE_10MHF; - ErrFlag = 1; - break; - } - } else { - db->op_mode = DMFE_10MHF; - DMFE_DBUG(0, "Link Failed :", phy_mode); - ErrFlag = 1; - } - - return ErrFlag; -} - - -/* - * Set 10/100 phyxcer capability - * AUTO mode : phyxcer register4 is NIC capability - * Force mode: phyxcer register4 is the force media - */ - -static void dmfe_set_phyxcer(struct dmfe_board_info *db) -{ - u16 phy_reg; - - /* Select 10/100M phyxcer */ - db->cr6_data &= ~0x40000; - update_cr6(db->cr6_data, db->ioaddr); - - /* DM9009 Chip: Phyxcer reg18 bit12=0 */ - if (db->chip_id == PCI_DM9009_ID) { - phy_reg = phy_read(db->ioaddr, - db->phy_addr, 18, db->chip_id) & ~0x1000; - - phy_write(db->ioaddr, - db->phy_addr, 18, phy_reg, db->chip_id); - } - - /* Phyxcer capability setting */ - phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0; - - if (db->media_mode & DMFE_AUTO) { - /* AUTO Mode */ - phy_reg |= db->PHY_reg4; - } else { - /* Force Mode */ - switch(db->media_mode) { - case DMFE_10MHF: phy_reg |= 0x20; break; - case DMFE_10MFD: phy_reg |= 0x40; break; - case DMFE_100MHF: phy_reg |= 0x80; break; - case DMFE_100MFD: phy_reg |= 0x100; break; - } - if (db->chip_id == PCI_DM9009_ID) phy_reg &= 0x61; - } - - /* Write new capability to Phyxcer Reg4 */ - if ( !(phy_reg & 0x01e0)) { - phy_reg|=db->PHY_reg4; - db->media_mode|=DMFE_AUTO; - } - phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); - - /* Restart Auto-Negotiation */ - if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) ) - phy_write(db->ioaddr, db->phy_addr, 0, 0x1800, db->chip_id); - if ( !db->chip_type ) - phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); -} - - -/* - * Process op-mode - * AUTO mode : PHY controller in Auto-negotiation Mode - * Force mode: PHY controller in force mode with HUB - * N-way force capability with SWITCH - */ - -static void dmfe_process_mode(struct dmfe_board_info *db) -{ - u16 phy_reg; - - /* Full Duplex Mode Check */ - if (db->op_mode & 0x4) - db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */ - else - db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */ - - /* Transciver Selection */ - if (db->op_mode & 0x10) /* 1M HomePNA */ - db->cr6_data |= 0x40000;/* External MII select */ - else - db->cr6_data &= ~0x40000;/* Internal 10/100 transciver */ - - update_cr6(db->cr6_data, db->ioaddr); - - /* 10/100M phyxcer force mode need */ - if ( !(db->media_mode & 0x18)) { - /* Forece Mode */ - phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id); - if ( !(phy_reg & 0x1) ) { - /* parter without N-Way capability */ - phy_reg = 0x0; - switch(db->op_mode) { - case DMFE_10MHF: phy_reg = 0x0; break; - case DMFE_10MFD: phy_reg = 0x100; break; - case DMFE_100MHF: phy_reg = 0x2000; break; - case DMFE_100MFD: phy_reg = 0x2100; break; - } - phy_write(db->ioaddr, - db->phy_addr, 0, phy_reg, db->chip_id); - if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) ) - mdelay(20); - phy_write(db->ioaddr, - db->phy_addr, 0, phy_reg, db->chip_id); - } - } -} - - -/* - * Write a word to Phy register - */ - -static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, - u16 phy_data, u32 chip_id) -{ - u16 i; - unsigned long ioaddr; - - if (chip_id == PCI_DM9132_ID) { - ioaddr = iobase + 0x80 + offset * 4; - outw(phy_data, ioaddr); - } else { - /* DM9102/DM9102A Chip */ - ioaddr = iobase + DCR9; - - /* Send 33 synchronization clock to Phy controller */ - for (i = 0; i < 35; i++) - phy_write_1bit(ioaddr, PHY_DATA_1); - - /* Send start command(01) to Phy */ - phy_write_1bit(ioaddr, PHY_DATA_0); - phy_write_1bit(ioaddr, PHY_DATA_1); - - /* Send write command(01) to Phy */ - phy_write_1bit(ioaddr, PHY_DATA_0); - phy_write_1bit(ioaddr, PHY_DATA_1); - - /* Send Phy address */ - for (i = 0x10; i > 0; i = i >> 1) - phy_write_1bit(ioaddr, - phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); - - /* Send register address */ - for (i = 0x10; i > 0; i = i >> 1) - phy_write_1bit(ioaddr, - offset & i ? PHY_DATA_1 : PHY_DATA_0); - - /* written trasnition */ - phy_write_1bit(ioaddr, PHY_DATA_1); - phy_write_1bit(ioaddr, PHY_DATA_0); - - /* Write a word data to PHY controller */ - for ( i = 0x8000; i > 0; i >>= 1) - phy_write_1bit(ioaddr, - phy_data & i ? PHY_DATA_1 : PHY_DATA_0); - } -} - - -/* - * Read a word data from phy register - */ - -static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id) -{ - int i; - u16 phy_data; - unsigned long ioaddr; - - if (chip_id == PCI_DM9132_ID) { - /* DM9132 Chip */ - ioaddr = iobase + 0x80 + offset * 4; - phy_data = inw(ioaddr); - } else { - /* DM9102/DM9102A Chip */ - ioaddr = iobase + DCR9; - - /* Send 33 synchronization clock to Phy controller */ - for (i = 0; i < 35; i++) - phy_write_1bit(ioaddr, PHY_DATA_1); - - /* Send start command(01) to Phy */ - phy_write_1bit(ioaddr, PHY_DATA_0); - phy_write_1bit(ioaddr, PHY_DATA_1); - - /* Send read command(10) to Phy */ - phy_write_1bit(ioaddr, PHY_DATA_1); - phy_write_1bit(ioaddr, PHY_DATA_0); - - /* Send Phy address */ - for (i = 0x10; i > 0; i = i >> 1) - phy_write_1bit(ioaddr, - phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); - - /* Send register address */ - for (i = 0x10; i > 0; i = i >> 1) - phy_write_1bit(ioaddr, - offset & i ? PHY_DATA_1 : PHY_DATA_0); - - /* Skip transition state */ - phy_read_1bit(ioaddr); - - /* read 16bit data */ - for (phy_data = 0, i = 0; i < 16; i++) { - phy_data <<= 1; - phy_data |= phy_read_1bit(ioaddr); - } - } - - return phy_data; -} - - -/* - * Write one bit data to Phy Controller - */ - -static void phy_write_1bit(unsigned long ioaddr, u32 phy_data) -{ - outl(phy_data, ioaddr); /* MII Clock Low */ - udelay(1); - outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */ - udelay(1); - outl(phy_data, ioaddr); /* MII Clock Low */ - udelay(1); -} - - -/* - * Read one bit phy data from PHY controller - */ - -static u16 phy_read_1bit(unsigned long ioaddr) -{ - u16 phy_data; - - outl(0x50000, ioaddr); - udelay(1); - phy_data = ( inl(ioaddr) >> 19 ) & 0x1; - outl(0x40000, ioaddr); - udelay(1); - - return phy_data; -} - - -/* - * Parser SROM and media mode - */ - -static void dmfe_parse_srom(struct dmfe_board_info * db) -{ - char * srom = db->srom; - int dmfe_mode, tmp_reg; - - DMFE_DBUG(0, "dmfe_parse_srom() ", 0); - - /* Init CR15 */ - db->cr15_data = CR15_DEFAULT; - - /* Check SROM Version */ - if ( ( (int) srom[18] & 0xff) == SROM_V41_CODE) { - /* SROM V4.01 */ - /* Get NIC support media mode */ - db->NIC_capability = le16_to_cpup((__le16 *) (srom + 34)); - db->PHY_reg4 = 0; - for (tmp_reg = 1; tmp_reg < 0x10; tmp_reg <<= 1) { - switch( db->NIC_capability & tmp_reg ) { - case 0x1: db->PHY_reg4 |= 0x0020; break; - case 0x2: db->PHY_reg4 |= 0x0040; break; - case 0x4: db->PHY_reg4 |= 0x0080; break; - case 0x8: db->PHY_reg4 |= 0x0100; break; - } - } - - /* Media Mode Force or not check */ - dmfe_mode = (le32_to_cpup((__le32 *) (srom + 34)) & - le32_to_cpup((__le32 *) (srom + 36))); - switch(dmfe_mode) { - case 0x4: dmfe_media_mode = DMFE_100MHF; break; /* 100MHF */ - case 0x2: dmfe_media_mode = DMFE_10MFD; break; /* 10MFD */ - case 0x8: dmfe_media_mode = DMFE_100MFD; break; /* 100MFD */ - case 0x100: - case 0x200: dmfe_media_mode = DMFE_1M_HPNA; break;/* HomePNA */ - } - - /* Special Function setting */ - /* VLAN function */ - if ( (SF_mode & 0x1) || (srom[43] & 0x80) ) - db->cr15_data |= 0x40; - - /* Flow Control */ - if ( (SF_mode & 0x2) || (srom[40] & 0x1) ) - db->cr15_data |= 0x400; - - /* TX pause packet */ - if ( (SF_mode & 0x4) || (srom[40] & 0xe) ) - db->cr15_data |= 0x9800; - } - - /* Parse HPNA parameter */ - db->HPNA_command = 1; - - /* Accept remote command or not */ - if (HPNA_rx_cmd == 0) - db->HPNA_command |= 0x8000; - - /* Issue remote command & operation mode */ - if (HPNA_tx_cmd == 1) - switch(HPNA_mode) { /* Issue Remote Command */ - case 0: db->HPNA_command |= 0x0904; break; - case 1: db->HPNA_command |= 0x0a00; break; - case 2: db->HPNA_command |= 0x0506; break; - case 3: db->HPNA_command |= 0x0602; break; - } - else - switch(HPNA_mode) { /* Don't Issue */ - case 0: db->HPNA_command |= 0x0004; break; - case 1: db->HPNA_command |= 0x0000; break; - case 2: db->HPNA_command |= 0x0006; break; - case 3: db->HPNA_command |= 0x0002; break; - } - - /* Check DM9801 or DM9802 present or not */ - db->HPNA_present = 0; - update_cr6(db->cr6_data|0x40000, db->ioaddr); - tmp_reg = phy_read(db->ioaddr, db->phy_addr, 3, db->chip_id); - if ( ( tmp_reg & 0xfff0 ) == 0xb900 ) { - /* DM9801 or DM9802 present */ - db->HPNA_timer = 8; - if ( phy_read(db->ioaddr, db->phy_addr, 31, db->chip_id) == 0x4404) { - /* DM9801 HomeRun */ - db->HPNA_present = 1; - dmfe_program_DM9801(db, tmp_reg); - } else { - /* DM9802 LongRun */ - db->HPNA_present = 2; - dmfe_program_DM9802(db); - } - } - -} - - -/* - * Init HomeRun DM9801 - */ - -static void dmfe_program_DM9801(struct dmfe_board_info * db, int HPNA_rev) -{ - uint reg17, reg25; - - if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9801_NOISE_FLOOR; - switch(HPNA_rev) { - case 0xb900: /* DM9801 E3 */ - db->HPNA_command |= 0x1000; - reg25 = phy_read(db->ioaddr, db->phy_addr, 24, db->chip_id); - reg25 = ( (reg25 + HPNA_NoiseFloor) & 0xff) | 0xf000; - reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); - break; - case 0xb901: /* DM9801 E4 */ - reg25 = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); - reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor; - reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); - reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor + 3; - break; - case 0xb902: /* DM9801 E5 */ - case 0xb903: /* DM9801 E6 */ - default: - db->HPNA_command |= 0x1000; - reg25 = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); - reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor - 5; - reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); - reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor; - break; - } - phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id); - phy_write(db->ioaddr, db->phy_addr, 17, reg17, db->chip_id); - phy_write(db->ioaddr, db->phy_addr, 25, reg25, db->chip_id); -} - - -/* - * Init HomeRun DM9802 - */ - -static void dmfe_program_DM9802(struct dmfe_board_info * db) -{ - uint phy_reg; - - if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9802_NOISE_FLOOR; - phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id); - phy_reg = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); - phy_reg = ( phy_reg & 0xff00) + HPNA_NoiseFloor; - phy_write(db->ioaddr, db->phy_addr, 25, phy_reg, db->chip_id); -} - - -/* - * Check remote HPNA power and speed status. If not correct, - * issue command again. -*/ - -static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * db) -{ - uint phy_reg; - - /* Got remote device status */ - phy_reg = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0x60; - switch(phy_reg) { - case 0x00: phy_reg = 0x0a00;break; /* LP/LS */ - case 0x20: phy_reg = 0x0900;break; /* LP/HS */ - case 0x40: phy_reg = 0x0600;break; /* HP/LS */ - case 0x60: phy_reg = 0x0500;break; /* HP/HS */ - } - - /* Check remote device status match our setting ot not */ - if ( phy_reg != (db->HPNA_command & 0x0f00) ) { - phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, - db->chip_id); - db->HPNA_timer=8; - } else - db->HPNA_timer=600; /* Match, every 10 minutes, check */ -} - - - -static DEFINE_PCI_DEVICE_TABLE(dmfe_pci_tbl) = { - { 0x1282, 0x9132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9132_ID }, - { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9102_ID }, - { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9100_ID }, - { 0x1282, 0x9009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9009_ID }, - { 0, } -}; -MODULE_DEVICE_TABLE(pci, dmfe_pci_tbl); - - -#ifdef CONFIG_PM -static int dmfe_suspend(struct pci_dev *pci_dev, pm_message_t state) -{ - struct net_device *dev = pci_get_drvdata(pci_dev); - struct dmfe_board_info *db = netdev_priv(dev); - u32 tmp; - - /* Disable upper layer interface */ - netif_device_detach(dev); - - /* Disable Tx/Rx */ - db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); - update_cr6(db->cr6_data, dev->base_addr); - - /* Disable Interrupt */ - outl(0, dev->base_addr + DCR7); - outl(inl (dev->base_addr + DCR5), dev->base_addr + DCR5); - - /* Fre RX buffers */ - dmfe_free_rxbuffer(db); - - /* Enable WOL */ - pci_read_config_dword(pci_dev, 0x40, &tmp); - tmp &= ~(DMFE_WOL_LINKCHANGE|DMFE_WOL_MAGICPACKET); - - if (db->wol_mode & WAKE_PHY) - tmp |= DMFE_WOL_LINKCHANGE; - if (db->wol_mode & WAKE_MAGIC) - tmp |= DMFE_WOL_MAGICPACKET; - - pci_write_config_dword(pci_dev, 0x40, tmp); - - pci_enable_wake(pci_dev, PCI_D3hot, 1); - pci_enable_wake(pci_dev, PCI_D3cold, 1); - - /* Power down device*/ - pci_save_state(pci_dev); - pci_set_power_state(pci_dev, pci_choose_state (pci_dev, state)); - - return 0; -} - -static int dmfe_resume(struct pci_dev *pci_dev) -{ - struct net_device *dev = pci_get_drvdata(pci_dev); - u32 tmp; - - pci_set_power_state(pci_dev, PCI_D0); - pci_restore_state(pci_dev); - - /* Re-initialize DM910X board */ - dmfe_init_dm910x(dev); - - /* Disable WOL */ - pci_read_config_dword(pci_dev, 0x40, &tmp); - - tmp &= ~(DMFE_WOL_LINKCHANGE | DMFE_WOL_MAGICPACKET); - pci_write_config_dword(pci_dev, 0x40, tmp); - - pci_enable_wake(pci_dev, PCI_D3hot, 0); - pci_enable_wake(pci_dev, PCI_D3cold, 0); - - /* Restart upper layer interface */ - netif_device_attach(dev); - - return 0; -} -#else -#define dmfe_suspend NULL -#define dmfe_resume NULL -#endif - -static struct pci_driver dmfe_driver = { - .name = "dmfe", - .id_table = dmfe_pci_tbl, - .probe = dmfe_init_one, - .remove = __devexit_p(dmfe_remove_one), - .suspend = dmfe_suspend, - .resume = dmfe_resume -}; - -MODULE_AUTHOR("Sten Wang, sten_wang@davicom.com.tw"); -MODULE_DESCRIPTION("Davicom DM910X fast ethernet driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); - -module_param(debug, int, 0); -module_param(mode, byte, 0); -module_param(cr6set, int, 0); -module_param(chkmode, byte, 0); -module_param(HPNA_mode, byte, 0); -module_param(HPNA_rx_cmd, byte, 0); -module_param(HPNA_tx_cmd, byte, 0); -module_param(HPNA_NoiseFloor, byte, 0); -module_param(SF_mode, byte, 0); -MODULE_PARM_DESC(debug, "Davicom DM9xxx enable debugging (0-1)"); -MODULE_PARM_DESC(mode, "Davicom DM9xxx: " - "Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA"); - -MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function " - "(bit 0: VLAN, bit 1 Flow Control, bit 2: TX pause packet)"); - -/* Description: - * when user used insmod to add module, system invoked init_module() - * to initialize and register. - */ - -static int __init dmfe_init_module(void) -{ - int rc; - - printk(version); - printed_version = 1; - - DMFE_DBUG(0, "init_module() ", debug); - - if (debug) - dmfe_debug = debug; /* set debug flag */ - if (cr6set) - dmfe_cr6_user_set = cr6set; - - switch(mode) { - case DMFE_10MHF: - case DMFE_100MHF: - case DMFE_10MFD: - case DMFE_100MFD: - case DMFE_1M_HPNA: - dmfe_media_mode = mode; - break; - default:dmfe_media_mode = DMFE_AUTO; - break; - } - - if (HPNA_mode > 4) - HPNA_mode = 0; /* Default: LP/HS */ - if (HPNA_rx_cmd > 1) - HPNA_rx_cmd = 0; /* Default: Ignored remote cmd */ - if (HPNA_tx_cmd > 1) - HPNA_tx_cmd = 0; /* Default: Don't issue remote cmd */ - if (HPNA_NoiseFloor > 15) - HPNA_NoiseFloor = 0; - - rc = pci_register_driver(&dmfe_driver); - if (rc < 0) - return rc; - - return 0; -} - - -/* - * Description: - * when user used rmmod to delete module, system invoked clean_module() - * to un-register all registered services. - */ - -static void __exit dmfe_cleanup_module(void) -{ - DMFE_DBUG(0, "dmfe_clean_module() ", debug); - pci_unregister_driver(&dmfe_driver); -} - -module_init(dmfe_init_module); -module_exit(dmfe_cleanup_module); diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c deleted file mode 100644 index 3031ed9c4a1..00000000000 --- a/drivers/net/tulip/eeprom.c +++ /dev/null @@ -1,385 +0,0 @@ -/* - drivers/net/tulip/eeprom.c - - Copyright 2000,2001 The Linux Kernel Team - Written/copyright 1994-2001 by Donald Becker. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - Please submit bug reports to http://bugzilla.kernel.org/. -*/ - -#include <linux/pci.h> -#include <linux/slab.h> -#include "tulip.h" -#include <linux/init.h> -#include <asm/unaligned.h> - - - -/* Serial EEPROM section. */ -/* The main routine to parse the very complicated SROM structure. - Search www.digital.com for "21X4 SROM" to get details. - This code is very complex, and will require changes to support - additional cards, so I'll be verbose about what is going on. - */ - -/* Known cards that have old-style EEPROMs. */ -static struct eeprom_fixup eeprom_fixups[] __devinitdata = { - {"Asante", 0, 0, 0x94, {0x1e00, 0x0000, 0x0800, 0x0100, 0x018c, - 0x0000, 0x0000, 0xe078, 0x0001, 0x0050, 0x0018 }}, - {"SMC9332DST", 0, 0, 0xC0, { 0x1e00, 0x0000, 0x0800, 0x041f, - 0x0000, 0x009E, /* 10baseT */ - 0x0004, 0x009E, /* 10baseT-FD */ - 0x0903, 0x006D, /* 100baseTx */ - 0x0905, 0x006D, /* 100baseTx-FD */ }}, - {"Cogent EM100", 0, 0, 0x92, { 0x1e00, 0x0000, 0x0800, 0x063f, - 0x0107, 0x8021, /* 100baseFx */ - 0x0108, 0x8021, /* 100baseFx-FD */ - 0x0100, 0x009E, /* 10baseT */ - 0x0104, 0x009E, /* 10baseT-FD */ - 0x0103, 0x006D, /* 100baseTx */ - 0x0105, 0x006D, /* 100baseTx-FD */ }}, - {"Maxtech NX-110", 0, 0, 0xE8, { 0x1e00, 0x0000, 0x0800, 0x0513, - 0x1001, 0x009E, /* 10base2, CSR12 0x10*/ - 0x0000, 0x009E, /* 10baseT */ - 0x0004, 0x009E, /* 10baseT-FD */ - 0x0303, 0x006D, /* 100baseTx, CSR12 0x03 */ - 0x0305, 0x006D, /* 100baseTx-FD CSR12 0x03 */}}, - {"Accton EN1207", 0, 0, 0xE8, { 0x1e00, 0x0000, 0x0800, 0x051F, - 0x1B01, 0x0000, /* 10base2, CSR12 0x1B */ - 0x0B00, 0x009E, /* 10baseT, CSR12 0x0B */ - 0x0B04, 0x009E, /* 10baseT-FD,CSR12 0x0B */ - 0x1B03, 0x006D, /* 100baseTx, CSR12 0x1B */ - 0x1B05, 0x006D, /* 100baseTx-FD CSR12 0x1B */ - }}, - {"NetWinder", 0x00, 0x10, 0x57, - /* Default media = MII - * MII block, reset sequence (3) = 0x0821 0x0000 0x0001, capabilities 0x01e1 - */ - { 0x1e00, 0x0000, 0x000b, 0x8f01, 0x0103, 0x0300, 0x0821, 0x000, 0x0001, 0x0000, 0x01e1 } - }, - {"Cobalt Microserver", 0, 0x10, 0xE0, {0x1e00, /* 0 == controller #, 1e == offset */ - 0x0000, /* 0 == high offset, 0 == gap */ - 0x0800, /* Default Autoselect */ - 0x8001, /* 1 leaf, extended type, bogus len */ - 0x0003, /* Type 3 (MII), PHY #0 */ - 0x0400, /* 0 init instr, 4 reset instr */ - 0x0801, /* Set control mode, GP0 output */ - 0x0000, /* Drive GP0 Low (RST is active low) */ - 0x0800, /* control mode, GP0 input (undriven) */ - 0x0000, /* clear control mode */ - 0x7800, /* 100TX FDX + HDX, 10bT FDX + HDX */ - 0x01e0, /* Advertise all above */ - 0x5000, /* FDX all above */ - 0x1800, /* Set fast TTM in 100bt modes */ - 0x0000, /* PHY cannot be unplugged */ - }}, - {NULL}}; - - -static const char *block_name[] __devinitdata = { - "21140 non-MII", - "21140 MII PHY", - "21142 Serial PHY", - "21142 MII PHY", - "21143 SYM PHY", - "21143 reset method" -}; - - -/** - * tulip_build_fake_mediatable - Build a fake mediatable entry. - * @tp: Ptr to the tulip private data. - * - * Some cards like the 3x5 HSC cards (J3514A) do not have a standard - * srom and can not be handled under the fixup routine. These cards - * still need a valid mediatable entry for correct csr12 setup and - * mii handling. - * - * Since this is currently a parisc-linux specific function, the - * #ifdef __hppa__ should completely optimize this function away for - * non-parisc hardware. - */ -static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp) -{ -#ifdef CONFIG_GSC - if (tp->flags & NEEDS_FAKE_MEDIA_TABLE) { - static unsigned char leafdata[] = - { 0x01, /* phy number */ - 0x02, /* gpr setup sequence length */ - 0x02, 0x00, /* gpr setup sequence */ - 0x02, /* phy reset sequence length */ - 0x01, 0x00, /* phy reset sequence */ - 0x00, 0x78, /* media capabilities */ - 0x00, 0xe0, /* nway advertisment */ - 0x00, 0x05, /* fdx bit map */ - 0x00, 0x06 /* ttm bit map */ - }; - - tp->mtable = kmalloc(sizeof(struct mediatable) + - sizeof(struct medialeaf), GFP_KERNEL); - - if (tp->mtable == NULL) - return; /* Horrible, impossible failure. */ - - tp->mtable->defaultmedia = 0x800; - tp->mtable->leafcount = 1; - tp->mtable->csr12dir = 0x3f; /* inputs on bit7 for hsc-pci, bit6 for pci-fx */ - tp->mtable->has_nonmii = 0; - tp->mtable->has_reset = 0; - tp->mtable->has_mii = 1; - tp->mtable->csr15dir = tp->mtable->csr15val = 0; - tp->mtable->mleaf[0].type = 1; - tp->mtable->mleaf[0].media = 11; - tp->mtable->mleaf[0].leafdata = &leafdata[0]; - tp->flags |= HAS_PHY_IRQ; - tp->csr12_shadow = -1; - } -#endif -} - -void __devinit tulip_parse_eeprom(struct net_device *dev) -{ - /* - dev is not registered at this point, so logging messages can't - use dev_<level> or netdev_<level> but dev->name is good via a - hack in the caller - */ - - /* The last media info list parsed, for multiport boards. */ - static struct mediatable *last_mediatable; - static unsigned char *last_ee_data; - static int controller_index; - struct tulip_private *tp = netdev_priv(dev); - unsigned char *ee_data = tp->eeprom; - int i; - - tp->mtable = NULL; - /* Detect an old-style (SA only) EEPROM layout: - memcmp(eedata, eedata+16, 8). */ - for (i = 0; i < 8; i ++) - if (ee_data[i] != ee_data[16+i]) - break; - if (i >= 8) { - if (ee_data[0] == 0xff) { - if (last_mediatable) { - controller_index++; - pr_info("%s: Controller %d of multiport board\n", - dev->name, controller_index); - tp->mtable = last_mediatable; - ee_data = last_ee_data; - goto subsequent_board; - } else - pr_info("%s: Missing EEPROM, this interface may not work correctly!\n", - dev->name); - return; - } - /* Do a fix-up based on the vendor half of the station address prefix. */ - for (i = 0; eeprom_fixups[i].name; i++) { - if (dev->dev_addr[0] == eeprom_fixups[i].addr0 && - dev->dev_addr[1] == eeprom_fixups[i].addr1 && - dev->dev_addr[2] == eeprom_fixups[i].addr2) { - if (dev->dev_addr[2] == 0xE8 && ee_data[0x1a] == 0x55) - i++; /* An Accton EN1207, not an outlaw Maxtech. */ - memcpy(ee_data + 26, eeprom_fixups[i].newtable, - sizeof(eeprom_fixups[i].newtable)); - pr_info("%s: Old format EEPROM on '%s' board. Using substitute media control info\n", - dev->name, eeprom_fixups[i].name); - break; - } - } - if (eeprom_fixups[i].name == NULL) { /* No fixup found. */ - pr_info("%s: Old style EEPROM with no media selection information\n", - dev->name); - return; - } - } - - controller_index = 0; - if (ee_data[19] > 1) { /* Multiport board. */ - last_ee_data = ee_data; - } -subsequent_board: - - if (ee_data[27] == 0) { /* No valid media table. */ - tulip_build_fake_mediatable(tp); - } else { - unsigned char *p = (void *)ee_data + ee_data[27]; - unsigned char csr12dir = 0; - int count, new_advertise = 0; - struct mediatable *mtable; - u16 media = get_u16(p); - - p += 2; - if (tp->flags & CSR12_IN_SROM) - csr12dir = *p++; - count = *p++; - - /* there is no phy information, don't even try to build mtable */ - if (count == 0) { - if (tulip_debug > 0) - pr_warning("%s: no phy info, aborting mtable build\n", - dev->name); - return; - } - - mtable = kmalloc(sizeof(struct mediatable) + - count * sizeof(struct medialeaf), - GFP_KERNEL); - if (mtable == NULL) - return; /* Horrible, impossible failure. */ - last_mediatable = tp->mtable = mtable; - mtable->defaultmedia = media; - mtable->leafcount = count; - mtable->csr12dir = csr12dir; - mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0; - mtable->csr15dir = mtable->csr15val = 0; - - pr_info("%s: EEPROM default media type %s\n", - dev->name, - media & 0x0800 ? "Autosense" - : medianame[media & MEDIA_MASK]); - for (i = 0; i < count; i++) { - struct medialeaf *leaf = &mtable->mleaf[i]; - - if ((p[0] & 0x80) == 0) { /* 21140 Compact block. */ - leaf->type = 0; - leaf->media = p[0] & 0x3f; - leaf->leafdata = p; - if ((p[2] & 0x61) == 0x01) /* Bogus, but Znyx boards do it. */ - mtable->has_mii = 1; - p += 4; - } else { - leaf->type = p[1]; - if (p[1] == 0x05) { - mtable->has_reset = i; - leaf->media = p[2] & 0x0f; - } else if (tp->chip_id == DM910X && p[1] == 0x80) { - /* Hack to ignore Davicom delay period block */ - mtable->leafcount--; - count--; - i--; - leaf->leafdata = p + 2; - p += (p[0] & 0x3f) + 1; - continue; - } else if (p[1] & 1) { - int gpr_len, reset_len; - - mtable->has_mii = 1; - leaf->media = 11; - gpr_len=p[3]*2; - reset_len=p[4+gpr_len]*2; - new_advertise |= get_u16(&p[7+gpr_len+reset_len]); - } else { - mtable->has_nonmii = 1; - leaf->media = p[2] & MEDIA_MASK; - /* Davicom's media number for 100BaseTX is strange */ - if (tp->chip_id == DM910X && leaf->media == 1) - leaf->media = 3; - switch (leaf->media) { - case 0: new_advertise |= 0x0020; break; - case 4: new_advertise |= 0x0040; break; - case 3: new_advertise |= 0x0080; break; - case 5: new_advertise |= 0x0100; break; - case 6: new_advertise |= 0x0200; break; - } - if (p[1] == 2 && leaf->media == 0) { - if (p[2] & 0x40) { - u32 base15 = get_unaligned((u16*)&p[7]); - mtable->csr15dir = - (get_unaligned((u16*)&p[9])<<16) + base15; - mtable->csr15val = - (get_unaligned((u16*)&p[11])<<16) + base15; - } else { - mtable->csr15dir = get_unaligned((u16*)&p[3])<<16; - mtable->csr15val = get_unaligned((u16*)&p[5])<<16; - } - } - } - leaf->leafdata = p + 2; - p += (p[0] & 0x3f) + 1; - } - if (tulip_debug > 1 && leaf->media == 11) { - unsigned char *bp = leaf->leafdata; - pr_info("%s: MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n", - dev->name, - bp[0], bp[1], bp[2 + bp[1]*2], - bp[5 + bp[2 + bp[1]*2]*2], - bp[4 + bp[2 + bp[1]*2]*2]); - } - pr_info("%s: Index #%d - Media %s (#%d) described by a %s (%d) block\n", - dev->name, - i, medianame[leaf->media & 15], leaf->media, - leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>", - leaf->type); - } - if (new_advertise) - tp->sym_advertise = new_advertise; - } -} -/* Reading a serial EEPROM is a "bit" grungy, but we work our way through:->.*/ - -/* EEPROM_Ctrl bits. */ -#define EE_SHIFT_CLK 0x02 /* EEPROM shift clock. */ -#define EE_CS 0x01 /* EEPROM chip select. */ -#define EE_DATA_WRITE 0x04 /* Data from the Tulip to EEPROM. */ -#define EE_WRITE_0 0x01 -#define EE_WRITE_1 0x05 -#define EE_DATA_READ 0x08 /* Data from the EEPROM chip. */ -#define EE_ENB (0x4800 | EE_CS) - -/* Delay between EEPROM clock transitions. - Even at 33Mhz current PCI implementations don't overrun the EEPROM clock. - We add a bus turn-around to insure that this remains true. */ -#define eeprom_delay() ioread32(ee_addr) - -/* The EEPROM commands include the alway-set leading bit. */ -#define EE_READ_CMD (6) - -/* Note: this routine returns extra data bits for size detection. */ -int __devinit tulip_read_eeprom(struct net_device *dev, int location, int addr_len) -{ - int i; - unsigned retval = 0; - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ee_addr = tp->base_addr + CSR9; - int read_cmd = location | (EE_READ_CMD << addr_len); - - /* If location is past the end of what we can address, don't - * read some other location (ie truncate). Just return zero. - */ - if (location > (1 << addr_len) - 1) - return 0; - - iowrite32(EE_ENB & ~EE_CS, ee_addr); - iowrite32(EE_ENB, ee_addr); - - /* Shift the read command bits out. */ - for (i = 4 + addr_len; i >= 0; i--) { - short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; - iowrite32(EE_ENB | dataval, ee_addr); - eeprom_delay(); - iowrite32(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr); - eeprom_delay(); - retval = (retval << 1) | ((ioread32(ee_addr) & EE_DATA_READ) ? 1 : 0); - } - iowrite32(EE_ENB, ee_addr); - eeprom_delay(); - - for (i = 16; i > 0; i--) { - iowrite32(EE_ENB | EE_SHIFT_CLK, ee_addr); - eeprom_delay(); - retval = (retval << 1) | ((ioread32(ee_addr) & EE_DATA_READ) ? 1 : 0); - iowrite32(EE_ENB, ee_addr); - eeprom_delay(); - } - - /* Terminate the EEPROM access. */ - iowrite32(EE_ENB & ~EE_CS, ee_addr); - return (tp->flags & HAS_SWAPPED_SEEPROM) ? swab16(retval) : retval; -} - diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c deleted file mode 100644 index 0013642903e..00000000000 --- a/drivers/net/tulip/interrupt.c +++ /dev/null @@ -1,811 +0,0 @@ -/* - drivers/net/tulip/interrupt.c - - Copyright 2000,2001 The Linux Kernel Team - Written/copyright 1994-2001 by Donald Becker. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - Please submit bugs to http://bugzilla.kernel.org/ . - -*/ - -#include <linux/pci.h> -#include "tulip.h" -#include <linux/etherdevice.h> - -int tulip_rx_copybreak; -unsigned int tulip_max_interrupt_work; - -#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION -#define MIT_SIZE 15 -#define MIT_TABLE 15 /* We use 0 or max */ - -static unsigned int mit_table[MIT_SIZE+1] = -{ - /* CRS11 21143 hardware Mitigation Control Interrupt - We use only RX mitigation we other techniques for - TX intr. mitigation. - - 31 Cycle Size (timer control) - 30:27 TX timer in 16 * Cycle size - 26:24 TX No pkts before Int. - 23:20 RX timer in Cycle size - 19:17 RX No pkts before Int. - 16 Continues Mode (CM) - */ - - 0x0, /* IM disabled */ - 0x80150000, /* RX time = 1, RX pkts = 2, CM = 1 */ - 0x80150000, - 0x80270000, - 0x80370000, - 0x80490000, - 0x80590000, - 0x80690000, - 0x807B0000, - 0x808B0000, - 0x809D0000, - 0x80AD0000, - 0x80BD0000, - 0x80CF0000, - 0x80DF0000, -// 0x80FF0000 /* RX time = 16, RX pkts = 7, CM = 1 */ - 0x80F10000 /* RX time = 16, RX pkts = 0, CM = 1 */ -}; -#endif - - -int tulip_refill_rx(struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - int entry; - int refilled = 0; - - /* Refill the Rx ring buffers. */ - for (; tp->cur_rx - tp->dirty_rx > 0; tp->dirty_rx++) { - entry = tp->dirty_rx % RX_RING_SIZE; - if (tp->rx_buffers[entry].skb == NULL) { - struct sk_buff *skb; - dma_addr_t mapping; - - skb = tp->rx_buffers[entry].skb = dev_alloc_skb(PKT_BUF_SZ); - if (skb == NULL) - break; - - mapping = pci_map_single(tp->pdev, skb->data, PKT_BUF_SZ, - PCI_DMA_FROMDEVICE); - tp->rx_buffers[entry].mapping = mapping; - - skb->dev = dev; /* Mark as being used by this device. */ - tp->rx_ring[entry].buffer1 = cpu_to_le32(mapping); - refilled++; - } - tp->rx_ring[entry].status = cpu_to_le32(DescOwned); - } - if(tp->chip_id == LC82C168) { - if(((ioread32(tp->base_addr + CSR5)>>17)&0x07) == 4) { - /* Rx stopped due to out of buffers, - * restart it - */ - iowrite32(0x01, tp->base_addr + CSR2); - } - } - return refilled; -} - -#ifdef CONFIG_TULIP_NAPI - -void oom_timer(unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - struct tulip_private *tp = netdev_priv(dev); - napi_schedule(&tp->napi); -} - -int tulip_poll(struct napi_struct *napi, int budget) -{ - struct tulip_private *tp = container_of(napi, struct tulip_private, napi); - struct net_device *dev = tp->dev; - int entry = tp->cur_rx % RX_RING_SIZE; - int work_done = 0; -#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION - int received = 0; -#endif - -#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION - -/* that one buffer is needed for mit activation; or might be a - bug in the ring buffer code; check later -- JHS*/ - - if (budget >=RX_RING_SIZE) budget--; -#endif - - if (tulip_debug > 4) - printk(KERN_DEBUG " In tulip_rx(), entry %d %08x\n", - entry, tp->rx_ring[entry].status); - - do { - if (ioread32(tp->base_addr + CSR5) == 0xffffffff) { - printk(KERN_DEBUG " In tulip_poll(), hardware disappeared\n"); - break; - } - /* Acknowledge current RX interrupt sources. */ - iowrite32((RxIntr | RxNoBuf), tp->base_addr + CSR5); - - - /* If we own the next entry, it is a new packet. Send it up. */ - while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) { - s32 status = le32_to_cpu(tp->rx_ring[entry].status); - short pkt_len; - - if (tp->dirty_rx + RX_RING_SIZE == tp->cur_rx) - break; - - if (tulip_debug > 5) - printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %08x\n", - dev->name, entry, status); - - if (++work_done >= budget) - goto not_done; - - /* - * Omit the four octet CRC from the length. - * (May not be considered valid until we have - * checked status for RxLengthOver2047 bits) - */ - pkt_len = ((status >> 16) & 0x7ff) - 4; - - /* - * Maximum pkt_len is 1518 (1514 + vlan header) - * Anything higher than this is always invalid - * regardless of RxLengthOver2047 bits - */ - - if ((status & (RxLengthOver2047 | - RxDescCRCError | - RxDescCollisionSeen | - RxDescRunt | - RxDescDescErr | - RxWholePkt)) != RxWholePkt || - pkt_len > 1518) { - if ((status & (RxLengthOver2047 | - RxWholePkt)) != RxWholePkt) { - /* Ingore earlier buffers. */ - if ((status & 0xffff) != 0x7fff) { - if (tulip_debug > 1) - dev_warn(&dev->dev, - "Oversized Ethernet frame spanned multiple buffers, status %08x!\n", - status); - dev->stats.rx_length_errors++; - } - } else { - /* There was a fatal error. */ - if (tulip_debug > 2) - printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n", - dev->name, status); - dev->stats.rx_errors++; /* end of a packet.*/ - if (pkt_len > 1518 || - (status & RxDescRunt)) - dev->stats.rx_length_errors++; - - if (status & 0x0004) - dev->stats.rx_frame_errors++; - if (status & 0x0002) - dev->stats.rx_crc_errors++; - if (status & 0x0001) - dev->stats.rx_fifo_errors++; - } - } else { - struct sk_buff *skb; - - /* Check if the packet is long enough to accept without copying - to a minimally-sized skbuff. */ - if (pkt_len < tulip_rx_copybreak && - (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { - skb_reserve(skb, 2); /* 16 byte align the IP header */ - pci_dma_sync_single_for_cpu(tp->pdev, - tp->rx_buffers[entry].mapping, - pkt_len, PCI_DMA_FROMDEVICE); -#if ! defined(__alpha__) - skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data, - pkt_len); - skb_put(skb, pkt_len); -#else - memcpy(skb_put(skb, pkt_len), - tp->rx_buffers[entry].skb->data, - pkt_len); -#endif - pci_dma_sync_single_for_device(tp->pdev, - tp->rx_buffers[entry].mapping, - pkt_len, PCI_DMA_FROMDEVICE); - } else { /* Pass up the skb already on the Rx ring. */ - char *temp = skb_put(skb = tp->rx_buffers[entry].skb, - pkt_len); - -#ifndef final_version - if (tp->rx_buffers[entry].mapping != - le32_to_cpu(tp->rx_ring[entry].buffer1)) { - dev_err(&dev->dev, - "Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %08llx %p / %p\n", - le32_to_cpu(tp->rx_ring[entry].buffer1), - (unsigned long long)tp->rx_buffers[entry].mapping, - skb->head, temp); - } -#endif - - pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping, - PKT_BUF_SZ, PCI_DMA_FROMDEVICE); - - tp->rx_buffers[entry].skb = NULL; - tp->rx_buffers[entry].mapping = 0; - } - skb->protocol = eth_type_trans(skb, dev); - - netif_receive_skb(skb); - - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } -#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION - received++; -#endif - - entry = (++tp->cur_rx) % RX_RING_SIZE; - if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/4) - tulip_refill_rx(dev); - - } - - /* New ack strategy... irq does not ack Rx any longer - hopefully this helps */ - - /* Really bad things can happen here... If new packet arrives - * and an irq arrives (tx or just due to occasionally unset - * mask), it will be acked by irq handler, but new thread - * is not scheduled. It is major hole in design. - * No idea how to fix this if "playing with fire" will fail - * tomorrow (night 011029). If it will not fail, we won - * finally: amount of IO did not increase at all. */ - } while ((ioread32(tp->base_addr + CSR5) & RxIntr)); - - #ifdef CONFIG_TULIP_NAPI_HW_MITIGATION - - /* We use this simplistic scheme for IM. It's proven by - real life installations. We can have IM enabled - continuesly but this would cause unnecessary latency. - Unfortunely we can't use all the NET_RX_* feedback here. - This would turn on IM for devices that is not contributing - to backlog congestion with unnecessary latency. - - We monitor the device RX-ring and have: - - HW Interrupt Mitigation either ON or OFF. - - ON: More then 1 pkt received (per intr.) OR we are dropping - OFF: Only 1 pkt received - - Note. We only use min and max (0, 15) settings from mit_table */ - - - if( tp->flags & HAS_INTR_MITIGATION) { - if( received > 1 ) { - if( ! tp->mit_on ) { - tp->mit_on = 1; - iowrite32(mit_table[MIT_TABLE], tp->base_addr + CSR11); - } - } - else { - if( tp->mit_on ) { - tp->mit_on = 0; - iowrite32(0, tp->base_addr + CSR11); - } - } - } - -#endif /* CONFIG_TULIP_NAPI_HW_MITIGATION */ - - tulip_refill_rx(dev); - - /* If RX ring is not full we are out of memory. */ - if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL) - goto oom; - - /* Remove us from polling list and enable RX intr. */ - - napi_complete(napi); - iowrite32(tulip_tbl[tp->chip_id].valid_intrs, tp->base_addr+CSR7); - - /* The last op happens after poll completion. Which means the following: - * 1. it can race with disabling irqs in irq handler - * 2. it can race with dise/enabling irqs in other poll threads - * 3. if an irq raised after beginning loop, it will be immediately - * triggered here. - * - * Summarizing: the logic results in some redundant irqs both - * due to races in masking and due to too late acking of already - * processed irqs. But it must not result in losing events. - */ - - return work_done; - - not_done: - if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/2 || - tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL) - tulip_refill_rx(dev); - - if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL) - goto oom; - - return work_done; - - oom: /* Executed with RX ints disabled */ - - /* Start timer, stop polling, but do not enable rx interrupts. */ - mod_timer(&tp->oom_timer, jiffies+1); - - /* Think: timer_pending() was an explicit signature of bug. - * Timer can be pending now but fired and completed - * before we did napi_complete(). See? We would lose it. */ - - /* remove ourselves from the polling list */ - napi_complete(napi); - - return work_done; -} - -#else /* CONFIG_TULIP_NAPI */ - -static int tulip_rx(struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - int entry = tp->cur_rx % RX_RING_SIZE; - int rx_work_limit = tp->dirty_rx + RX_RING_SIZE - tp->cur_rx; - int received = 0; - - if (tulip_debug > 4) - printk(KERN_DEBUG " In tulip_rx(), entry %d %08x\n", - entry, tp->rx_ring[entry].status); - /* If we own the next entry, it is a new packet. Send it up. */ - while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) { - s32 status = le32_to_cpu(tp->rx_ring[entry].status); - short pkt_len; - - if (tulip_debug > 5) - printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %08x\n", - dev->name, entry, status); - if (--rx_work_limit < 0) - break; - - /* - Omit the four octet CRC from the length. - (May not be considered valid until we have - checked status for RxLengthOver2047 bits) - */ - pkt_len = ((status >> 16) & 0x7ff) - 4; - /* - Maximum pkt_len is 1518 (1514 + vlan header) - Anything higher than this is always invalid - regardless of RxLengthOver2047 bits - */ - - if ((status & (RxLengthOver2047 | - RxDescCRCError | - RxDescCollisionSeen | - RxDescRunt | - RxDescDescErr | - RxWholePkt)) != RxWholePkt || - pkt_len > 1518) { - if ((status & (RxLengthOver2047 | - RxWholePkt)) != RxWholePkt) { - /* Ingore earlier buffers. */ - if ((status & 0xffff) != 0x7fff) { - if (tulip_debug > 1) - dev_warn(&dev->dev, - "Oversized Ethernet frame spanned multiple buffers, status %08x!\n", - status); - dev->stats.rx_length_errors++; - } - } else { - /* There was a fatal error. */ - if (tulip_debug > 2) - printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n", - dev->name, status); - dev->stats.rx_errors++; /* end of a packet.*/ - if (pkt_len > 1518 || - (status & RxDescRunt)) - dev->stats.rx_length_errors++; - if (status & 0x0004) - dev->stats.rx_frame_errors++; - if (status & 0x0002) - dev->stats.rx_crc_errors++; - if (status & 0x0001) - dev->stats.rx_fifo_errors++; - } - } else { - struct sk_buff *skb; - - /* Check if the packet is long enough to accept without copying - to a minimally-sized skbuff. */ - if (pkt_len < tulip_rx_copybreak && - (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { - skb_reserve(skb, 2); /* 16 byte align the IP header */ - pci_dma_sync_single_for_cpu(tp->pdev, - tp->rx_buffers[entry].mapping, - pkt_len, PCI_DMA_FROMDEVICE); -#if ! defined(__alpha__) - skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data, - pkt_len); - skb_put(skb, pkt_len); -#else - memcpy(skb_put(skb, pkt_len), - tp->rx_buffers[entry].skb->data, - pkt_len); -#endif - pci_dma_sync_single_for_device(tp->pdev, - tp->rx_buffers[entry].mapping, - pkt_len, PCI_DMA_FROMDEVICE); - } else { /* Pass up the skb already on the Rx ring. */ - char *temp = skb_put(skb = tp->rx_buffers[entry].skb, - pkt_len); - -#ifndef final_version - if (tp->rx_buffers[entry].mapping != - le32_to_cpu(tp->rx_ring[entry].buffer1)) { - dev_err(&dev->dev, - "Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %Lx %p / %p\n", - le32_to_cpu(tp->rx_ring[entry].buffer1), - (long long)tp->rx_buffers[entry].mapping, - skb->head, temp); - } -#endif - - pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping, - PKT_BUF_SZ, PCI_DMA_FROMDEVICE); - - tp->rx_buffers[entry].skb = NULL; - tp->rx_buffers[entry].mapping = 0; - } - skb->protocol = eth_type_trans(skb, dev); - - netif_rx(skb); - - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } - received++; - entry = (++tp->cur_rx) % RX_RING_SIZE; - } - return received; -} -#endif /* CONFIG_TULIP_NAPI */ - -static inline unsigned int phy_interrupt (struct net_device *dev) -{ -#ifdef __hppa__ - struct tulip_private *tp = netdev_priv(dev); - int csr12 = ioread32(tp->base_addr + CSR12) & 0xff; - - if (csr12 != tp->csr12_shadow) { - /* ack interrupt */ - iowrite32(csr12 | 0x02, tp->base_addr + CSR12); - tp->csr12_shadow = csr12; - /* do link change stuff */ - spin_lock(&tp->lock); - tulip_check_duplex(dev); - spin_unlock(&tp->lock); - /* clear irq ack bit */ - iowrite32(csr12 & ~0x02, tp->base_addr + CSR12); - - return 1; - } -#endif - - return 0; -} - -/* The interrupt handler does all of the Rx thread work and cleans up - after the Tx thread. */ -irqreturn_t tulip_interrupt(int irq, void *dev_instance) -{ - struct net_device *dev = (struct net_device *)dev_instance; - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - int csr5; - int missed; - int rx = 0; - int tx = 0; - int oi = 0; - int maxrx = RX_RING_SIZE; - int maxtx = TX_RING_SIZE; - int maxoi = TX_RING_SIZE; -#ifdef CONFIG_TULIP_NAPI - int rxd = 0; -#else - int entry; -#endif - unsigned int work_count = tulip_max_interrupt_work; - unsigned int handled = 0; - - /* Let's see whether the interrupt really is for us */ - csr5 = ioread32(ioaddr + CSR5); - - if (tp->flags & HAS_PHY_IRQ) - handled = phy_interrupt (dev); - - if ((csr5 & (NormalIntr|AbnormalIntr)) == 0) - return IRQ_RETVAL(handled); - - tp->nir++; - - do { - -#ifdef CONFIG_TULIP_NAPI - - if (!rxd && (csr5 & (RxIntr | RxNoBuf))) { - rxd++; - /* Mask RX intrs and add the device to poll list. */ - iowrite32(tulip_tbl[tp->chip_id].valid_intrs&~RxPollInt, ioaddr + CSR7); - napi_schedule(&tp->napi); - - if (!(csr5&~(AbnormalIntr|NormalIntr|RxPollInt|TPLnkPass))) - break; - } - - /* Acknowledge the interrupt sources we handle here ASAP - the poll function does Rx and RxNoBuf acking */ - - iowrite32(csr5 & 0x0001ff3f, ioaddr + CSR5); - -#else - /* Acknowledge all of the current interrupt sources ASAP. */ - iowrite32(csr5 & 0x0001ffff, ioaddr + CSR5); - - - if (csr5 & (RxIntr | RxNoBuf)) { - rx += tulip_rx(dev); - tulip_refill_rx(dev); - } - -#endif /* CONFIG_TULIP_NAPI */ - - if (tulip_debug > 4) - printk(KERN_DEBUG "%s: interrupt csr5=%#8.8x new csr5=%#8.8x\n", - dev->name, csr5, ioread32(ioaddr + CSR5)); - - - if (csr5 & (TxNoBuf | TxDied | TxIntr | TimerInt)) { - unsigned int dirty_tx; - - spin_lock(&tp->lock); - - for (dirty_tx = tp->dirty_tx; tp->cur_tx - dirty_tx > 0; - dirty_tx++) { - int entry = dirty_tx % TX_RING_SIZE; - int status = le32_to_cpu(tp->tx_ring[entry].status); - - if (status < 0) - break; /* It still has not been Txed */ - - /* Check for Rx filter setup frames. */ - if (tp->tx_buffers[entry].skb == NULL) { - /* test because dummy frames not mapped */ - if (tp->tx_buffers[entry].mapping) - pci_unmap_single(tp->pdev, - tp->tx_buffers[entry].mapping, - sizeof(tp->setup_frame), - PCI_DMA_TODEVICE); - continue; - } - - if (status & 0x8000) { - /* There was an major error, log it. */ -#ifndef final_version - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Transmit error, Tx status %08x\n", - dev->name, status); -#endif - dev->stats.tx_errors++; - if (status & 0x4104) - dev->stats.tx_aborted_errors++; - if (status & 0x0C00) - dev->stats.tx_carrier_errors++; - if (status & 0x0200) - dev->stats.tx_window_errors++; - if (status & 0x0002) - dev->stats.tx_fifo_errors++; - if ((status & 0x0080) && tp->full_duplex == 0) - dev->stats.tx_heartbeat_errors++; - } else { - dev->stats.tx_bytes += - tp->tx_buffers[entry].skb->len; - dev->stats.collisions += (status >> 3) & 15; - dev->stats.tx_packets++; - } - - pci_unmap_single(tp->pdev, tp->tx_buffers[entry].mapping, - tp->tx_buffers[entry].skb->len, - PCI_DMA_TODEVICE); - - /* Free the original skb. */ - dev_kfree_skb_irq(tp->tx_buffers[entry].skb); - tp->tx_buffers[entry].skb = NULL; - tp->tx_buffers[entry].mapping = 0; - tx++; - } - -#ifndef final_version - if (tp->cur_tx - dirty_tx > TX_RING_SIZE) { - dev_err(&dev->dev, - "Out-of-sync dirty pointer, %d vs. %d\n", - dirty_tx, tp->cur_tx); - dirty_tx += TX_RING_SIZE; - } -#endif - - if (tp->cur_tx - dirty_tx < TX_RING_SIZE - 2) - netif_wake_queue(dev); - - tp->dirty_tx = dirty_tx; - if (csr5 & TxDied) { - if (tulip_debug > 2) - dev_warn(&dev->dev, - "The transmitter stopped. CSR5 is %x, CSR6 %x, new CSR6 %x\n", - csr5, ioread32(ioaddr + CSR6), - tp->csr6); - tulip_restart_rxtx(tp); - } - spin_unlock(&tp->lock); - } - - /* Log errors. */ - if (csr5 & AbnormalIntr) { /* Abnormal error summary bit. */ - if (csr5 == 0xffffffff) - break; - if (csr5 & TxJabber) - dev->stats.tx_errors++; - if (csr5 & TxFIFOUnderflow) { - if ((tp->csr6 & 0xC000) != 0xC000) - tp->csr6 += 0x4000; /* Bump up the Tx threshold */ - else - tp->csr6 |= 0x00200000; /* Store-n-forward. */ - /* Restart the transmit process. */ - tulip_restart_rxtx(tp); - iowrite32(0, ioaddr + CSR1); - } - if (csr5 & (RxDied | RxNoBuf)) { - if (tp->flags & COMET_MAC_ADDR) { - iowrite32(tp->mc_filter[0], ioaddr + 0xAC); - iowrite32(tp->mc_filter[1], ioaddr + 0xB0); - } - } - if (csr5 & RxDied) { /* Missed a Rx frame. */ - dev->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff; - dev->stats.rx_errors++; - tulip_start_rxtx(tp); - } - /* - * NB: t21142_lnk_change() does a del_timer_sync(), so be careful if this - * call is ever done under the spinlock - */ - if (csr5 & (TPLnkPass | TPLnkFail | 0x08000000)) { - if (tp->link_change) - (tp->link_change)(dev, csr5); - } - if (csr5 & SystemError) { - int error = (csr5 >> 23) & 7; - /* oops, we hit a PCI error. The code produced corresponds - * to the reason: - * 0 - parity error - * 1 - master abort - * 2 - target abort - * Note that on parity error, we should do a software reset - * of the chip to get it back into a sane state (according - * to the 21142/3 docs that is). - * -- rmk - */ - dev_err(&dev->dev, - "(%lu) System Error occurred (%d)\n", - tp->nir, error); - } - /* Clear all error sources, included undocumented ones! */ - iowrite32(0x0800f7ba, ioaddr + CSR5); - oi++; - } - if (csr5 & TimerInt) { - - if (tulip_debug > 2) - dev_err(&dev->dev, - "Re-enabling interrupts, %08x\n", - csr5); - iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7); - tp->ttimer = 0; - oi++; - } - if (tx > maxtx || rx > maxrx || oi > maxoi) { - if (tulip_debug > 1) - dev_warn(&dev->dev, "Too much work during an interrupt, csr5=0x%08x. (%lu) (%d,%d,%d)\n", - csr5, tp->nir, tx, rx, oi); - - /* Acknowledge all interrupt sources. */ - iowrite32(0x8001ffff, ioaddr + CSR5); - if (tp->flags & HAS_INTR_MITIGATION) { - /* Josip Loncaric at ICASE did extensive experimentation - to develop a good interrupt mitigation setting.*/ - iowrite32(0x8b240000, ioaddr + CSR11); - } else if (tp->chip_id == LC82C168) { - /* the LC82C168 doesn't have a hw timer.*/ - iowrite32(0x00, ioaddr + CSR7); - mod_timer(&tp->timer, RUN_AT(HZ/50)); - } else { - /* Mask all interrupting sources, set timer to - re-enable. */ - iowrite32(((~csr5) & 0x0001ebef) | AbnormalIntr | TimerInt, ioaddr + CSR7); - iowrite32(0x0012, ioaddr + CSR11); - } - break; - } - - work_count--; - if (work_count == 0) - break; - - csr5 = ioread32(ioaddr + CSR5); - -#ifdef CONFIG_TULIP_NAPI - if (rxd) - csr5 &= ~RxPollInt; - } while ((csr5 & (TxNoBuf | - TxDied | - TxIntr | - TimerInt | - /* Abnormal intr. */ - RxDied | - TxFIFOUnderflow | - TxJabber | - TPLnkFail | - SystemError )) != 0); -#else - } while ((csr5 & (NormalIntr|AbnormalIntr)) != 0); - - tulip_refill_rx(dev); - - /* check if the card is in suspend mode */ - entry = tp->dirty_rx % RX_RING_SIZE; - if (tp->rx_buffers[entry].skb == NULL) { - if (tulip_debug > 1) - dev_warn(&dev->dev, - "in rx suspend mode: (%lu) (tp->cur_rx = %u, ttimer = %d, rx = %d) go/stay in suspend mode\n", - tp->nir, tp->cur_rx, tp->ttimer, rx); - if (tp->chip_id == LC82C168) { - iowrite32(0x00, ioaddr + CSR7); - mod_timer(&tp->timer, RUN_AT(HZ/50)); - } else { - if (tp->ttimer == 0 || (ioread32(ioaddr + CSR11) & 0xffff) == 0) { - if (tulip_debug > 1) - dev_warn(&dev->dev, - "in rx suspend mode: (%lu) set timer\n", - tp->nir); - iowrite32(tulip_tbl[tp->chip_id].valid_intrs | TimerInt, - ioaddr + CSR7); - iowrite32(TimerInt, ioaddr + CSR5); - iowrite32(12, ioaddr + CSR11); - tp->ttimer = 1; - } - } - } -#endif /* CONFIG_TULIP_NAPI */ - - if ((missed = ioread32(ioaddr + CSR8) & 0x1ffff)) { - dev->stats.rx_dropped += missed & 0x10000 ? 0x10000 : missed; - } - - if (tulip_debug > 4) - printk(KERN_DEBUG "%s: exiting interrupt, csr5=%#04x\n", - dev->name, ioread32(ioaddr + CSR5)); - - return IRQ_HANDLED; -} diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c deleted file mode 100644 index a0c770ee4b6..00000000000 --- a/drivers/net/tulip/media.c +++ /dev/null @@ -1,557 +0,0 @@ -/* - drivers/net/tulip/media.c - - Copyright 2000,2001 The Linux Kernel Team - Written/copyright 1994-2001 by Donald Becker. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - - Please submit bugs to http://bugzilla.kernel.org/ . -*/ - -#include <linux/kernel.h> -#include <linux/mii.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include "tulip.h" - - -/* The maximum data clock rate is 2.5 Mhz. The minimum timing is usually - met by back-to-back PCI I/O cycles, but we insert a delay to avoid - "overclocking" issues or future 66Mhz PCI. */ -#define mdio_delay() ioread32(mdio_addr) - -/* Read and write the MII registers using software-generated serial - MDIO protocol. It is just different enough from the EEPROM protocol - to not share code. The maxium data clock rate is 2.5 Mhz. */ -#define MDIO_SHIFT_CLK 0x10000 -#define MDIO_DATA_WRITE0 0x00000 -#define MDIO_DATA_WRITE1 0x20000 -#define MDIO_ENB 0x00000 /* Ignore the 0x02000 databook setting. */ -#define MDIO_ENB_IN 0x40000 -#define MDIO_DATA_READ 0x80000 - -static const unsigned char comet_miireg2offset[32] = { - 0xB4, 0xB8, 0xBC, 0xC0, 0xC4, 0xC8, 0xCC, 0, 0,0,0,0, 0,0,0,0, - 0,0xD0,0,0, 0,0,0,0, 0,0,0,0, 0, 0xD4, 0xD8, 0xDC, }; - - -/* MII transceiver control section. - Read and write the MII registers using software-generated serial - MDIO protocol. - See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management functions") - or DP83840A data sheet for more details. - */ - -int tulip_mdio_read(struct net_device *dev, int phy_id, int location) -{ - struct tulip_private *tp = netdev_priv(dev); - int i; - int read_cmd = (0xf6 << 10) | ((phy_id & 0x1f) << 5) | location; - int retval = 0; - void __iomem *ioaddr = tp->base_addr; - void __iomem *mdio_addr = ioaddr + CSR9; - unsigned long flags; - - if (location & ~0x1f) - return 0xffff; - - if (tp->chip_id == COMET && phy_id == 30) { - if (comet_miireg2offset[location]) - return ioread32(ioaddr + comet_miireg2offset[location]); - return 0xffff; - } - - spin_lock_irqsave(&tp->mii_lock, flags); - if (tp->chip_id == LC82C168) { - iowrite32(0x60020000 + (phy_id<<23) + (location<<18), ioaddr + 0xA0); - ioread32(ioaddr + 0xA0); - ioread32(ioaddr + 0xA0); - for (i = 1000; i >= 0; --i) { - barrier(); - if ( ! ((retval = ioread32(ioaddr + 0xA0)) & 0x80000000)) - break; - } - spin_unlock_irqrestore(&tp->mii_lock, flags); - return retval & 0xffff; - } - - /* Establish sync by sending at least 32 logic ones. */ - for (i = 32; i >= 0; i--) { - iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr); - mdio_delay(); - iowrite32(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - /* Shift the read command bits out. */ - for (i = 15; i >= 0; i--) { - int dataval = (read_cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0; - - iowrite32(MDIO_ENB | dataval, mdio_addr); - mdio_delay(); - iowrite32(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - /* Read the two transition, 16 data, and wire-idle bits. */ - for (i = 19; i > 0; i--) { - iowrite32(MDIO_ENB_IN, mdio_addr); - mdio_delay(); - retval = (retval << 1) | ((ioread32(mdio_addr) & MDIO_DATA_READ) ? 1 : 0); - iowrite32(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - - spin_unlock_irqrestore(&tp->mii_lock, flags); - return (retval>>1) & 0xffff; -} - -void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val) -{ - struct tulip_private *tp = netdev_priv(dev); - int i; - int cmd = (0x5002 << 16) | ((phy_id & 0x1f) << 23) | (location<<18) | (val & 0xffff); - void __iomem *ioaddr = tp->base_addr; - void __iomem *mdio_addr = ioaddr + CSR9; - unsigned long flags; - - if (location & ~0x1f) - return; - - if (tp->chip_id == COMET && phy_id == 30) { - if (comet_miireg2offset[location]) - iowrite32(val, ioaddr + comet_miireg2offset[location]); - return; - } - - spin_lock_irqsave(&tp->mii_lock, flags); - if (tp->chip_id == LC82C168) { - iowrite32(cmd, ioaddr + 0xA0); - for (i = 1000; i >= 0; --i) { - barrier(); - if ( ! (ioread32(ioaddr + 0xA0) & 0x80000000)) - break; - } - spin_unlock_irqrestore(&tp->mii_lock, flags); - return; - } - - /* Establish sync by sending 32 logic ones. */ - for (i = 32; i >= 0; i--) { - iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr); - mdio_delay(); - iowrite32(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - /* Shift the command bits out. */ - for (i = 31; i >= 0; i--) { - int dataval = (cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0; - iowrite32(MDIO_ENB | dataval, mdio_addr); - mdio_delay(); - iowrite32(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - /* Clear out extra bits. */ - for (i = 2; i > 0; i--) { - iowrite32(MDIO_ENB_IN, mdio_addr); - mdio_delay(); - iowrite32(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - - spin_unlock_irqrestore(&tp->mii_lock, flags); -} - - -/* Set up the transceiver control registers for the selected media type. */ -void tulip_select_media(struct net_device *dev, int startup) -{ - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - struct mediatable *mtable = tp->mtable; - u32 new_csr6; - int i; - - if (mtable) { - struct medialeaf *mleaf = &mtable->mleaf[tp->cur_index]; - unsigned char *p = mleaf->leafdata; - switch (mleaf->type) { - case 0: /* 21140 non-MII xcvr. */ - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Using a 21140 non-MII transceiver with control setting %02x\n", - dev->name, p[1]); - dev->if_port = p[0]; - if (startup) - iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12); - iowrite32(p[1], ioaddr + CSR12); - new_csr6 = 0x02000000 | ((p[2] & 0x71) << 18); - break; - case 2: case 4: { - u16 setup[5]; - u32 csr13val, csr14val, csr15dir, csr15val; - for (i = 0; i < 5; i++) - setup[i] = get_u16(&p[i*2 + 1]); - - dev->if_port = p[0] & MEDIA_MASK; - if (tulip_media_cap[dev->if_port] & MediaAlwaysFD) - tp->full_duplex = 1; - - if (startup && mtable->has_reset) { - struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset]; - unsigned char *rst = rleaf->leafdata; - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Resetting the transceiver\n", - dev->name); - for (i = 0; i < rst[0]; i++) - iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15); - } - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: 21143 non-MII %s transceiver control %04x/%04x\n", - dev->name, medianame[dev->if_port], - setup[0], setup[1]); - if (p[0] & 0x40) { /* SIA (CSR13-15) setup values are provided. */ - csr13val = setup[0]; - csr14val = setup[1]; - csr15dir = (setup[3]<<16) | setup[2]; - csr15val = (setup[4]<<16) | setup[2]; - iowrite32(0, ioaddr + CSR13); - iowrite32(csr14val, ioaddr + CSR14); - iowrite32(csr15dir, ioaddr + CSR15); /* Direction */ - iowrite32(csr15val, ioaddr + CSR15); /* Data */ - iowrite32(csr13val, ioaddr + CSR13); - } else { - csr13val = 1; - csr14val = 0; - csr15dir = (setup[0]<<16) | 0x0008; - csr15val = (setup[1]<<16) | 0x0008; - if (dev->if_port <= 4) - csr14val = t21142_csr14[dev->if_port]; - if (startup) { - iowrite32(0, ioaddr + CSR13); - iowrite32(csr14val, ioaddr + CSR14); - } - iowrite32(csr15dir, ioaddr + CSR15); /* Direction */ - iowrite32(csr15val, ioaddr + CSR15); /* Data */ - if (startup) iowrite32(csr13val, ioaddr + CSR13); - } - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Setting CSR15 to %08x/%08x\n", - dev->name, csr15dir, csr15val); - if (mleaf->type == 4) - new_csr6 = 0x82020000 | ((setup[2] & 0x71) << 18); - else - new_csr6 = 0x82420000; - break; - } - case 1: case 3: { - int phy_num = p[0]; - int init_length = p[1]; - u16 *misc_info, tmp_info; - - dev->if_port = 11; - new_csr6 = 0x020E0000; - if (mleaf->type == 3) { /* 21142 */ - u16 *init_sequence = (u16*)(p+2); - u16 *reset_sequence = &((u16*)(p+3))[init_length]; - int reset_length = p[2 + init_length*2]; - misc_info = reset_sequence + reset_length; - if (startup) { - int timeout = 10; /* max 1 ms */ - for (i = 0; i < reset_length; i++) - iowrite32(get_u16(&reset_sequence[i]) << 16, ioaddr + CSR15); - - /* flush posted writes */ - ioread32(ioaddr + CSR15); - - /* Sect 3.10.3 in DP83840A.pdf (p39) */ - udelay(500); - - /* Section 4.2 in DP83840A.pdf (p43) */ - /* and IEEE 802.3 "22.2.4.1.1 Reset" */ - while (timeout-- && - (tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET)) - udelay(100); - } - for (i = 0; i < init_length; i++) - iowrite32(get_u16(&init_sequence[i]) << 16, ioaddr + CSR15); - - ioread32(ioaddr + CSR15); /* flush posted writes */ - } else { - u8 *init_sequence = p + 2; - u8 *reset_sequence = p + 3 + init_length; - int reset_length = p[2 + init_length]; - misc_info = (u16*)(reset_sequence + reset_length); - if (startup) { - int timeout = 10; /* max 1 ms */ - iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12); - for (i = 0; i < reset_length; i++) - iowrite32(reset_sequence[i], ioaddr + CSR12); - - /* flush posted writes */ - ioread32(ioaddr + CSR12); - - /* Sect 3.10.3 in DP83840A.pdf (p39) */ - udelay(500); - - /* Section 4.2 in DP83840A.pdf (p43) */ - /* and IEEE 802.3 "22.2.4.1.1 Reset" */ - while (timeout-- && - (tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET)) - udelay(100); - } - for (i = 0; i < init_length; i++) - iowrite32(init_sequence[i], ioaddr + CSR12); - - ioread32(ioaddr + CSR12); /* flush posted writes */ - } - - tmp_info = get_u16(&misc_info[1]); - if (tmp_info) - tp->advertising[phy_num] = tmp_info | 1; - if (tmp_info && startup < 2) { - if (tp->mii_advertise == 0) - tp->mii_advertise = tp->advertising[phy_num]; - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Advertising %04x on MII %d\n", - dev->name, tp->mii_advertise, - tp->phys[phy_num]); - tulip_mdio_write(dev, tp->phys[phy_num], 4, tp->mii_advertise); - } - break; - } - case 5: case 6: { - u16 setup[5]; - - new_csr6 = 0; /* FIXME */ - - for (i = 0; i < 5; i++) - setup[i] = get_u16(&p[i*2 + 1]); - - if (startup && mtable->has_reset) { - struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset]; - unsigned char *rst = rleaf->leafdata; - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Resetting the transceiver\n", - dev->name); - for (i = 0; i < rst[0]; i++) - iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15); - } - - break; - } - default: - printk(KERN_DEBUG "%s: Invalid media table selection %d\n", - dev->name, mleaf->type); - new_csr6 = 0x020E0000; - } - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Using media type %s, CSR12 is %02x\n", - dev->name, medianame[dev->if_port], - ioread32(ioaddr + CSR12) & 0xff); - } else if (tp->chip_id == LC82C168) { - if (startup && ! tp->medialock) - dev->if_port = tp->mii_cnt ? 11 : 0; - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: PNIC PHY status is %3.3x, media %s\n", - dev->name, ioread32(ioaddr + 0xB8), medianame[dev->if_port]); - if (tp->mii_cnt) { - new_csr6 = 0x810C0000; - iowrite32(0x0001, ioaddr + CSR15); - iowrite32(0x0201B07A, ioaddr + 0xB8); - } else if (startup) { - /* Start with 10mbps to do autonegotiation. */ - iowrite32(0x32, ioaddr + CSR12); - new_csr6 = 0x00420000; - iowrite32(0x0001B078, ioaddr + 0xB8); - iowrite32(0x0201B078, ioaddr + 0xB8); - } else if (dev->if_port == 3 || dev->if_port == 5) { - iowrite32(0x33, ioaddr + CSR12); - new_csr6 = 0x01860000; - /* Trigger autonegotiation. */ - iowrite32(startup ? 0x0201F868 : 0x0001F868, ioaddr + 0xB8); - } else { - iowrite32(0x32, ioaddr + CSR12); - new_csr6 = 0x00420000; - iowrite32(0x1F078, ioaddr + 0xB8); - } - } else { /* Unknown chip type with no media table. */ - if (tp->default_port == 0) - dev->if_port = tp->mii_cnt ? 11 : 3; - if (tulip_media_cap[dev->if_port] & MediaIsMII) { - new_csr6 = 0x020E0000; - } else if (tulip_media_cap[dev->if_port] & MediaIsFx) { - new_csr6 = 0x02860000; - } else - new_csr6 = 0x03860000; - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: No media description table, assuming %s transceiver, CSR12 %02x\n", - dev->name, medianame[dev->if_port], - ioread32(ioaddr + CSR12)); - } - - tp->csr6 = new_csr6 | (tp->csr6 & 0xfdff) | (tp->full_duplex ? 0x0200 : 0); - - mdelay(1); -} - -/* - Check the MII negotiated duplex and change the CSR6 setting if - required. - Return 0 if everything is OK. - Return < 0 if the transceiver is missing or has no link beat. - */ -int tulip_check_duplex(struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - unsigned int bmsr, lpa, negotiated, new_csr6; - - bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR); - lpa = tulip_mdio_read(dev, tp->phys[0], MII_LPA); - if (tulip_debug > 1) - dev_info(&dev->dev, "MII status %04x, Link partner report %04x\n", - bmsr, lpa); - if (bmsr == 0xffff) - return -2; - if ((bmsr & BMSR_LSTATUS) == 0) { - int new_bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR); - if ((new_bmsr & BMSR_LSTATUS) == 0) { - if (tulip_debug > 1) - dev_info(&dev->dev, - "No link beat on the MII interface, status %04x\n", - new_bmsr); - return -1; - } - } - negotiated = lpa & tp->advertising[0]; - tp->full_duplex = mii_duplex(tp->full_duplex_lock, negotiated); - - new_csr6 = tp->csr6; - - if (negotiated & LPA_100) new_csr6 &= ~TxThreshold; - else new_csr6 |= TxThreshold; - if (tp->full_duplex) new_csr6 |= FullDuplex; - else new_csr6 &= ~FullDuplex; - - if (new_csr6 != tp->csr6) { - tp->csr6 = new_csr6; - tulip_restart_rxtx(tp); - - if (tulip_debug > 0) - dev_info(&dev->dev, - "Setting %s-duplex based on MII#%d link partner capability of %04x\n", - tp->full_duplex ? "full" : "half", - tp->phys[0], lpa); - return 1; - } - - return 0; -} - -void __devinit tulip_find_mii (struct net_device *dev, int board_idx) -{ - struct tulip_private *tp = netdev_priv(dev); - int phyn, phy_idx = 0; - int mii_reg0; - int mii_advert; - unsigned int to_advert, new_bmcr, ane_switch; - - /* Find the connected MII xcvrs. - Doing this in open() would allow detecting external xcvrs later, - but takes much time. */ - for (phyn = 1; phyn <= 32 && phy_idx < sizeof (tp->phys); phyn++) { - int phy = phyn & 0x1f; - int mii_status = tulip_mdio_read (dev, phy, MII_BMSR); - if ((mii_status & 0x8301) == 0x8001 || - ((mii_status & BMSR_100BASE4) == 0 && - (mii_status & 0x7800) != 0)) { - /* preserve Becker logic, gain indentation level */ - } else { - continue; - } - - mii_reg0 = tulip_mdio_read (dev, phy, MII_BMCR); - mii_advert = tulip_mdio_read (dev, phy, MII_ADVERTISE); - ane_switch = 0; - - /* if not advertising at all, gen an - * advertising value from the capability - * bits in BMSR - */ - if ((mii_advert & ADVERTISE_ALL) == 0) { - unsigned int tmpadv = tulip_mdio_read (dev, phy, MII_BMSR); - mii_advert = ((tmpadv >> 6) & 0x3e0) | 1; - } - - if (tp->mii_advertise) { - tp->advertising[phy_idx] = - to_advert = tp->mii_advertise; - } else if (tp->advertising[phy_idx]) { - to_advert = tp->advertising[phy_idx]; - } else { - tp->advertising[phy_idx] = - tp->mii_advertise = - to_advert = mii_advert; - } - - tp->phys[phy_idx++] = phy; - - pr_info("tulip%d: MII transceiver #%d config %04x status %04x advertising %04x\n", - board_idx, phy, mii_reg0, mii_status, mii_advert); - - /* Fixup for DLink with miswired PHY. */ - if (mii_advert != to_advert) { - printk(KERN_DEBUG "tulip%d: Advertising %04x on PHY %d, previously advertising %04x\n", - board_idx, to_advert, phy, mii_advert); - tulip_mdio_write (dev, phy, 4, to_advert); - } - - /* Enable autonegotiation: some boards default to off. */ - if (tp->default_port == 0) { - new_bmcr = mii_reg0 | BMCR_ANENABLE; - if (new_bmcr != mii_reg0) { - new_bmcr |= BMCR_ANRESTART; - ane_switch = 1; - } - } - /* ...or disable nway, if forcing media */ - else { - new_bmcr = mii_reg0 & ~BMCR_ANENABLE; - if (new_bmcr != mii_reg0) - ane_switch = 1; - } - - /* clear out bits we never want at this point */ - new_bmcr &= ~(BMCR_CTST | BMCR_FULLDPLX | BMCR_ISOLATE | - BMCR_PDOWN | BMCR_SPEED100 | BMCR_LOOPBACK | - BMCR_RESET); - - if (tp->full_duplex) - new_bmcr |= BMCR_FULLDPLX; - if (tulip_media_cap[tp->default_port] & MediaIs100) - new_bmcr |= BMCR_SPEED100; - - if (new_bmcr != mii_reg0) { - /* some phys need the ANE switch to - * happen before forced media settings - * will "take." However, we write the - * same value twice in order not to - * confuse the sane phys. - */ - if (ane_switch) { - tulip_mdio_write (dev, phy, MII_BMCR, new_bmcr); - udelay (10); - } - tulip_mdio_write (dev, phy, MII_BMCR, new_bmcr); - } - } - tp->mii_cnt = phy_idx; - if (tp->mtable && tp->mtable->has_mii && phy_idx == 0) { - pr_info("tulip%d: ***WARNING***: No MII transceiver found!\n", - board_idx); - tp->phys[0] = 1; - } -} diff --git a/drivers/net/tulip/pnic.c b/drivers/net/tulip/pnic.c deleted file mode 100644 index a63e64b6863..00000000000 --- a/drivers/net/tulip/pnic.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - drivers/net/tulip/pnic.c - - Copyright 2000,2001 The Linux Kernel Team - Written/copyright 1994-2001 by Donald Becker. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - - Please submit bugs to http://bugzilla.kernel.org/ . -*/ - -#include <linux/kernel.h> -#include <linux/jiffies.h> -#include "tulip.h" - - -void pnic_do_nway(struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - u32 phy_reg = ioread32(ioaddr + 0xB8); - u32 new_csr6 = tp->csr6 & ~0x40C40200; - - if (phy_reg & 0x78000000) { /* Ignore baseT4 */ - if (phy_reg & 0x20000000) dev->if_port = 5; - else if (phy_reg & 0x40000000) dev->if_port = 3; - else if (phy_reg & 0x10000000) dev->if_port = 4; - else if (phy_reg & 0x08000000) dev->if_port = 0; - tp->nwayset = 1; - new_csr6 = (dev->if_port & 1) ? 0x01860000 : 0x00420000; - iowrite32(0x32 | (dev->if_port & 1), ioaddr + CSR12); - if (dev->if_port & 1) - iowrite32(0x1F868, ioaddr + 0xB8); - if (phy_reg & 0x30000000) { - tp->full_duplex = 1; - new_csr6 |= 0x00000200; - } - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: PNIC autonegotiated status %08x, %s\n", - dev->name, phy_reg, medianame[dev->if_port]); - if (tp->csr6 != new_csr6) { - tp->csr6 = new_csr6; - /* Restart Tx */ - tulip_restart_rxtx(tp); - dev->trans_start = jiffies; - } - } -} - -void pnic_lnk_change(struct net_device *dev, int csr5) -{ - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - int phy_reg = ioread32(ioaddr + 0xB8); - - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: PNIC link changed state %08x, CSR5 %08x\n", - dev->name, phy_reg, csr5); - if (ioread32(ioaddr + CSR5) & TPLnkFail) { - iowrite32((ioread32(ioaddr + CSR7) & ~TPLnkFail) | TPLnkPass, ioaddr + CSR7); - /* If we use an external MII, then we mustn't use the - * internal negotiation. - */ - if (tulip_media_cap[dev->if_port] & MediaIsMII) - return; - if (! tp->nwayset || time_after(jiffies, dev_trans_start(dev) + 1*HZ)) { - tp->csr6 = 0x00420000 | (tp->csr6 & 0x0000fdff); - iowrite32(tp->csr6, ioaddr + CSR6); - iowrite32(0x30, ioaddr + CSR12); - iowrite32(0x0201F078, ioaddr + 0xB8); /* Turn on autonegotiation. */ - dev->trans_start = jiffies; - } - } else if (ioread32(ioaddr + CSR5) & TPLnkPass) { - if (tulip_media_cap[dev->if_port] & MediaIsMII) { - spin_lock(&tp->lock); - tulip_check_duplex(dev); - spin_unlock(&tp->lock); - } else { - pnic_do_nway(dev); - } - iowrite32((ioread32(ioaddr + CSR7) & ~TPLnkPass) | TPLnkFail, ioaddr + CSR7); - } -} - -void pnic_timer(unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - int next_tick = 60*HZ; - - if(!ioread32(ioaddr + CSR7)) { - /* the timer was called due to a work overflow - * in the interrupt handler. Skip the connection - * checks, the nic is definitively speaking with - * his link partner. - */ - goto too_good_connection; - } - - if (tulip_media_cap[dev->if_port] & MediaIsMII) { - spin_lock_irq(&tp->lock); - if (tulip_check_duplex(dev) > 0) - next_tick = 3*HZ; - spin_unlock_irq(&tp->lock); - } else { - int csr12 = ioread32(ioaddr + CSR12); - int new_csr6 = tp->csr6 & ~0x40C40200; - int phy_reg = ioread32(ioaddr + 0xB8); - int csr5 = ioread32(ioaddr + CSR5); - - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: PNIC timer PHY status %08x, %s CSR5 %08x\n", - dev->name, phy_reg, medianame[dev->if_port], csr5); - if (phy_reg & 0x04000000) { /* Remote link fault */ - iowrite32(0x0201F078, ioaddr + 0xB8); - next_tick = 1*HZ; - tp->nwayset = 0; - } else if (phy_reg & 0x78000000) { /* Ignore baseT4 */ - pnic_do_nway(dev); - next_tick = 60*HZ; - } else if (csr5 & TPLnkFail) { /* 100baseTx link beat */ - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: %s link beat failed, CSR12 %04x, CSR5 %08x, PHY %03x\n", - dev->name, medianame[dev->if_port], - csr12, - ioread32(ioaddr + CSR5), - ioread32(ioaddr + 0xB8)); - next_tick = 3*HZ; - if (tp->medialock) { - } else if (tp->nwayset && (dev->if_port & 1)) { - next_tick = 1*HZ; - } else if (dev->if_port == 0) { - dev->if_port = 3; - iowrite32(0x33, ioaddr + CSR12); - new_csr6 = 0x01860000; - iowrite32(0x1F868, ioaddr + 0xB8); - } else { - dev->if_port = 0; - iowrite32(0x32, ioaddr + CSR12); - new_csr6 = 0x00420000; - iowrite32(0x1F078, ioaddr + 0xB8); - } - if (tp->csr6 != new_csr6) { - tp->csr6 = new_csr6; - /* Restart Tx */ - tulip_restart_rxtx(tp); - dev->trans_start = jiffies; - if (tulip_debug > 1) - dev_info(&dev->dev, - "Changing PNIC configuration to %s %s-duplex, CSR6 %08x\n", - medianame[dev->if_port], - tp->full_duplex ? "full" : "half", - new_csr6); - } - } - } -too_good_connection: - mod_timer(&tp->timer, RUN_AT(next_tick)); - if(!ioread32(ioaddr + CSR7)) { - if (tulip_debug > 1) - dev_info(&dev->dev, "sw timer wakeup\n"); - disable_irq(dev->irq); - tulip_refill_rx(dev); - enable_irq(dev->irq); - iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7); - } -} diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c deleted file mode 100644 index 4690c8e6920..00000000000 --- a/drivers/net/tulip/pnic2.c +++ /dev/null @@ -1,406 +0,0 @@ -/* - drivers/net/tulip/pnic2.c - - Copyright 2000,2001 The Linux Kernel Team - Written/copyright 1994-2001 by Donald Becker. - Modified to hep support PNIC_II by Kevin B. Hendricks - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - - Please submit bugs to http://bugzilla.kernel.org/ . -*/ - - -/* Understanding the PNIC_II - everything is this file is based - * on the PNIC_II_PDF datasheet which is sorely lacking in detail - * - * As I understand things, here are the registers and bits that - * explain the masks and constants used in this file that are - * either different from the 21142/3 or important for basic operation. - * - * - * CSR 6 (mask = 0xfe3bd1fd of bits not to change) - * ----- - * Bit 24 - SCR - * Bit 23 - PCS - * Bit 22 - TTM (Trasmit Threshold Mode) - * Bit 18 - Port Select - * Bit 13 - Start - 1, Stop - 0 Transmissions - * Bit 11:10 - Loop Back Operation Mode - * Bit 9 - Full Duplex mode (Advertise 10BaseT-FD is CSR14<7> is set) - * Bit 1 - Start - 1, Stop - 0 Receive - * - * - * CSR 14 (mask = 0xfff0ee39 of bits not to change) - * ------ - * Bit 19 - PAUSE-Pause - * Bit 18 - Advertise T4 - * Bit 17 - Advertise 100baseTx-FD - * Bit 16 - Advertise 100baseTx-HD - * Bit 12 - LTE - Link Test Enable - * Bit 7 - ANE - Auto Negotiate Enable - * Bit 6 - HDE - Advertise 10baseT-HD - * Bit 2 - Reset to Power down - kept as 1 for normal operation - * Bit 1 - Loop Back enable for 10baseT MCC - * - * - * CSR 12 - * ------ - * Bit 25 - Partner can do T4 - * Bit 24 - Partner can do 100baseTx-FD - * Bit 23 - Partner can do 100baseTx-HD - * Bit 22 - Partner can do 10baseT-FD - * Bit 21 - Partner can do 10baseT-HD - * Bit 15 - LPN is 1 if all above bits are valid other wise 0 - * Bit 14:12 - autonegotiation state (write 001 to start autonegotiate) - * Bit 3 - Autopolarity state - * Bit 2 - LS10B - link state of 10baseT 0 - good, 1 - failed - * Bit 1 - LS100B - link state of 100baseT 0 - good, 1 - failed - * - * - * Data Port Selection Info - *------------------------- - * - * CSR14<7> CSR6<18> CSR6<22> CSR6<23> CSR6<24> MODE/PORT - * 1 0 0 (X) 0 (X) 1 NWAY - * 0 0 1 0 (X) 0 10baseT - * 0 1 0 1 1 (X) 100baseT - * - * - */ - - - -#include "tulip.h" -#include <linux/delay.h> - - -void pnic2_timer(unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - int next_tick = 60*HZ; - - if (tulip_debug > 3) - dev_info(&dev->dev, "PNIC2 negotiation status %08x\n", - ioread32(ioaddr + CSR12)); - - if (next_tick) { - mod_timer(&tp->timer, RUN_AT(next_tick)); - } -} - - -void pnic2_start_nway(struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - int csr14; - int csr12; - - /* set up what to advertise during the negotiation */ - - /* load in csr14 and mask off bits not to touch - * comment at top of file explains mask value - */ - csr14 = (ioread32(ioaddr + CSR14) & 0xfff0ee39); - - /* bit 17 - advetise 100baseTx-FD */ - if (tp->sym_advertise & 0x0100) csr14 |= 0x00020000; - - /* bit 16 - advertise 100baseTx-HD */ - if (tp->sym_advertise & 0x0080) csr14 |= 0x00010000; - - /* bit 6 - advertise 10baseT-HD */ - if (tp->sym_advertise & 0x0020) csr14 |= 0x00000040; - - /* Now set bit 12 Link Test Enable, Bit 7 Autonegotiation Enable - * and bit 0 Don't PowerDown 10baseT - */ - csr14 |= 0x00001184; - - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Restarting PNIC2 autonegotiation, csr14=%08x\n", - dev->name, csr14); - - /* tell pnic2_lnk_change we are doing an nway negotiation */ - dev->if_port = 0; - tp->nway = tp->mediasense = 1; - tp->nwayset = tp->lpar = 0; - - /* now we have to set up csr6 for NWAY state */ - - tp->csr6 = ioread32(ioaddr + CSR6); - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: On Entry to Nway, csr6=%08x\n", - dev->name, tp->csr6); - - /* mask off any bits not to touch - * comment at top of file explains mask value - */ - tp->csr6 = tp->csr6 & 0xfe3bd1fd; - - /* don't forget that bit 9 is also used for advertising */ - /* advertise 10baseT-FD for the negotiation (bit 9) */ - if (tp->sym_advertise & 0x0040) tp->csr6 |= 0x00000200; - - /* set bit 24 for nway negotiation mode ... - * see Data Port Selection comment at top of file - * and "Stop" - reset both Transmit (bit 13) and Receive (bit 1) - */ - tp->csr6 |= 0x01000000; - iowrite32(csr14, ioaddr + CSR14); - iowrite32(tp->csr6, ioaddr + CSR6); - udelay(100); - - /* all set up so now force the negotiation to begin */ - - /* read in current values and mask off all but the - * Autonegotiation bits 14:12. Writing a 001 to those bits - * should start the autonegotiation - */ - csr12 = (ioread32(ioaddr + CSR12) & 0xffff8fff); - csr12 |= 0x1000; - iowrite32(csr12, ioaddr + CSR12); -} - - - -void pnic2_lnk_change(struct net_device *dev, int csr5) -{ - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - int csr14; - - /* read the staus register to find out what is up */ - int csr12 = ioread32(ioaddr + CSR12); - - if (tulip_debug > 1) - dev_info(&dev->dev, - "PNIC2 link status interrupt %08x, CSR5 %x, %08x\n", - csr12, csr5, ioread32(ioaddr + CSR14)); - - /* If NWay finished and we have a negotiated partner capability. - * check bits 14:12 for bit pattern 101 - all is good - */ - if (tp->nway && !tp->nwayset) { - - /* we did an auto negotiation */ - - if ((csr12 & 0x7000) == 0x5000) { - - /* negotiation ended successfully */ - - /* get the link partners reply and mask out all but - * bits 24-21 which show the partners capabilities - * and match those to what we advertised - * - * then begin to interpret the results of the negotiation. - * Always go in this order : (we are ignoring T4 for now) - * 100baseTx-FD, 100baseTx-HD, 10baseT-FD, 10baseT-HD - */ - - int negotiated = ((csr12 >> 16) & 0x01E0) & tp->sym_advertise; - tp->lpar = (csr12 >> 16); - tp->nwayset = 1; - - if (negotiated & 0x0100) dev->if_port = 5; - else if (negotiated & 0x0080) dev->if_port = 3; - else if (negotiated & 0x0040) dev->if_port = 4; - else if (negotiated & 0x0020) dev->if_port = 0; - else { - if (tulip_debug > 1) - dev_info(&dev->dev, - "funny autonegotiate result csr12 %08x advertising %04x\n", - csr12, tp->sym_advertise); - tp->nwayset = 0; - /* so check if 100baseTx link state is okay */ - if ((csr12 & 2) == 0 && (tp->sym_advertise & 0x0180)) - dev->if_port = 3; - } - - /* now record the duplex that was negotiated */ - tp->full_duplex = 0; - if ((dev->if_port == 4) || (dev->if_port == 5)) - tp->full_duplex = 1; - - if (tulip_debug > 1) { - if (tp->nwayset) - dev_info(&dev->dev, - "Switching to %s based on link negotiation %04x & %04x = %04x\n", - medianame[dev->if_port], - tp->sym_advertise, tp->lpar, - negotiated); - } - - /* remember to turn off bit 7 - autonegotiate - * enable so we can properly end nway mode and - * set duplex (ie. use csr6<9> again) - */ - csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f); - iowrite32(csr14,ioaddr + CSR14); - - - /* now set the data port and operating mode - * (see the Data Port Selection comments at - * the top of the file - */ - - /* get current csr6 and mask off bits not to touch */ - /* see comment at top of file */ - - tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd); - - /* so if using if_port 3 or 5 then select the 100baseT - * port else select the 10baseT port. - * See the Data Port Selection table at the top - * of the file which was taken from the PNIC_II.PDF - * datasheet - */ - if (dev->if_port & 1) tp->csr6 |= 0x01840000; - else tp->csr6 |= 0x00400000; - - /* now set the full duplex bit appropriately */ - if (tp->full_duplex) tp->csr6 |= 0x00000200; - - iowrite32(1, ioaddr + CSR13); - - if (tulip_debug > 2) - printk(KERN_DEBUG "%s: Setting CSR6 %08x/%x CSR12 %08x\n", - dev->name, tp->csr6, - ioread32(ioaddr + CSR6), ioread32(ioaddr + CSR12)); - - /* now the following actually writes out the - * new csr6 values - */ - tulip_start_rxtx(tp); - - return; - - } else { - dev_info(&dev->dev, - "Autonegotiation failed, using %s, link beat status %04x\n", - medianame[dev->if_port], csr12); - - /* remember to turn off bit 7 - autonegotiate - * enable so we don't forget - */ - csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f); - iowrite32(csr14,ioaddr + CSR14); - - /* what should we do when autonegotiate fails? - * should we try again or default to baseline - * case. I just don't know. - * - * for now default to some baseline case - */ - - dev->if_port = 0; - tp->nway = 0; - tp->nwayset = 1; - - /* set to 10baseTx-HD - see Data Port Selection - * comment given at the top of the file - */ - tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd); - tp->csr6 |= 0x00400000; - - tulip_restart_rxtx(tp); - - return; - - } - } - - if ((tp->nwayset && (csr5 & 0x08000000) && - (dev->if_port == 3 || dev->if_port == 5) && - (csr12 & 2) == 2) || (tp->nway && (csr5 & (TPLnkFail)))) { - - /* Link blew? Maybe restart NWay. */ - - if (tulip_debug > 2) - printk(KERN_DEBUG "%s: Ugh! Link blew?\n", dev->name); - - del_timer_sync(&tp->timer); - pnic2_start_nway(dev); - tp->timer.expires = RUN_AT(3*HZ); - add_timer(&tp->timer); - - return; - } - - - if (dev->if_port == 3 || dev->if_port == 5) { - - /* we are at 100mb and a potential link change occurred */ - - if (tulip_debug > 1) - dev_info(&dev->dev, "PNIC2 %s link beat %s\n", - medianame[dev->if_port], - (csr12 & 2) ? "failed" : "good"); - - /* check 100 link beat */ - - tp->nway = 0; - tp->nwayset = 1; - - /* if failed then try doing an nway to get in sync */ - if ((csr12 & 2) && ! tp->medialock) { - del_timer_sync(&tp->timer); - pnic2_start_nway(dev); - tp->timer.expires = RUN_AT(3*HZ); - add_timer(&tp->timer); - } - - return; - } - - if (dev->if_port == 0 || dev->if_port == 4) { - - /* we are at 10mb and a potential link change occurred */ - - if (tulip_debug > 1) - dev_info(&dev->dev, "PNIC2 %s link beat %s\n", - medianame[dev->if_port], - (csr12 & 4) ? "failed" : "good"); - - - tp->nway = 0; - tp->nwayset = 1; - - /* if failed, try doing an nway to get in sync */ - if ((csr12 & 4) && ! tp->medialock) { - del_timer_sync(&tp->timer); - pnic2_start_nway(dev); - tp->timer.expires = RUN_AT(3*HZ); - add_timer(&tp->timer); - } - - return; - } - - - if (tulip_debug > 1) - dev_info(&dev->dev, "PNIC2 Link Change Default?\n"); - - /* if all else fails default to trying 10baseT-HD */ - dev->if_port = 0; - - /* make sure autonegotiate enable is off */ - csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f); - iowrite32(csr14,ioaddr + CSR14); - - /* set to 10baseTx-HD - see Data Port Selection - * comment given at the top of the file - */ - tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd); - tp->csr6 |= 0x00400000; - - tulip_restart_rxtx(tp); -} - diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c deleted file mode 100644 index 36c2725ec88..00000000000 --- a/drivers/net/tulip/timer.c +++ /dev/null @@ -1,182 +0,0 @@ -/* - drivers/net/tulip/timer.c - - Copyright 2000,2001 The Linux Kernel Team - Written/copyright 1994-2001 by Donald Becker. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - - Please submit bugs to http://bugzilla.kernel.org/ . -*/ - - -#include "tulip.h" - - -void tulip_media_task(struct work_struct *work) -{ - struct tulip_private *tp = - container_of(work, struct tulip_private, media_work); - struct net_device *dev = tp->dev; - void __iomem *ioaddr = tp->base_addr; - u32 csr12 = ioread32(ioaddr + CSR12); - int next_tick = 2*HZ; - unsigned long flags; - - if (tulip_debug > 2) { - printk(KERN_DEBUG "%s: Media selection tick, %s, status %08x mode %08x SIA %08x %08x %08x %08x\n", - dev->name, medianame[dev->if_port], - ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR6), - csr12, ioread32(ioaddr + CSR13), - ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15)); - } - switch (tp->chip_id) { - case DC21140: - case DC21142: - case MX98713: - case COMPEX9881: - case DM910X: - default: { - struct medialeaf *mleaf; - unsigned char *p; - if (tp->mtable == NULL) { /* No EEPROM info, use generic code. */ - /* Not much that can be done. - Assume this a generic MII or SYM transceiver. */ - next_tick = 60*HZ; - if (tulip_debug > 2) - printk(KERN_DEBUG "%s: network media monitor CSR6 %08x CSR12 0x%02x\n", - dev->name, - ioread32(ioaddr + CSR6), csr12 & 0xff); - break; - } - mleaf = &tp->mtable->mleaf[tp->cur_index]; - p = mleaf->leafdata; - switch (mleaf->type) { - case 0: case 4: { - /* Type 0 serial or 4 SYM transceiver. Check the link beat bit. */ - int offset = mleaf->type == 4 ? 5 : 2; - s8 bitnum = p[offset]; - if (p[offset+1] & 0x80) { - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Transceiver monitor tick CSR12=%#02x, no media sense\n", - dev->name, csr12); - if (mleaf->type == 4) { - if (mleaf->media == 3 && (csr12 & 0x02)) - goto select_next_media; - } - break; - } - if (tulip_debug > 2) - printk(KERN_DEBUG "%s: Transceiver monitor tick: CSR12=%#02x bit %d is %d, expecting %d\n", - dev->name, csr12, (bitnum >> 1) & 7, - (csr12 & (1 << ((bitnum >> 1) & 7))) != 0, - (bitnum >= 0)); - /* Check that the specified bit has the proper value. */ - if ((bitnum < 0) != - ((csr12 & (1 << ((bitnum >> 1) & 7))) != 0)) { - if (tulip_debug > 2) - printk(KERN_DEBUG "%s: Link beat detected for %s\n", - dev->name, - medianame[mleaf->media & MEDIA_MASK]); - if ((p[2] & 0x61) == 0x01) /* Bogus Znyx board. */ - goto actually_mii; - netif_carrier_on(dev); - break; - } - netif_carrier_off(dev); - if (tp->medialock) - break; - select_next_media: - if (--tp->cur_index < 0) { - /* We start again, but should instead look for default. */ - tp->cur_index = tp->mtable->leafcount - 1; - } - dev->if_port = tp->mtable->mleaf[tp->cur_index].media; - if (tulip_media_cap[dev->if_port] & MediaIsFD) - goto select_next_media; /* Skip FD entries. */ - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: No link beat on media %s, trying transceiver type %s\n", - dev->name, - medianame[mleaf->media & MEDIA_MASK], - medianame[tp->mtable->mleaf[tp->cur_index].media]); - tulip_select_media(dev, 0); - /* Restart the transmit process. */ - tulip_restart_rxtx(tp); - next_tick = (24*HZ)/10; - break; - } - case 1: case 3: /* 21140, 21142 MII */ - actually_mii: - if (tulip_check_duplex(dev) < 0) { - netif_carrier_off(dev); - next_tick = 3*HZ; - } else { - netif_carrier_on(dev); - next_tick = 60*HZ; - } - break; - case 2: /* 21142 serial block has no link beat. */ - default: - break; - } - } - break; - } - - - spin_lock_irqsave(&tp->lock, flags); - if (tp->timeout_recovery) { - tulip_tx_timeout_complete(tp, ioaddr); - tp->timeout_recovery = 0; - } - spin_unlock_irqrestore(&tp->lock, flags); - - /* mod_timer synchronizes us with potential add_timer calls - * from interrupts. - */ - mod_timer(&tp->timer, RUN_AT(next_tick)); -} - - -void mxic_timer(unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - int next_tick = 60*HZ; - - if (tulip_debug > 3) { - dev_info(&dev->dev, "MXIC negotiation status %08x\n", - ioread32(ioaddr + CSR12)); - } - if (next_tick) { - mod_timer(&tp->timer, RUN_AT(next_tick)); - } -} - - -void comet_timer(unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - struct tulip_private *tp = netdev_priv(dev); - int next_tick = 60*HZ; - - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: Comet link status %04x partner capability %04x\n", - dev->name, - tulip_mdio_read(dev, tp->phys[0], 1), - tulip_mdio_read(dev, tp->phys[0], 5)); - /* mod_timer synchronizes us with potential add_timer calls - * from interrupts. - */ - if (tulip_check_duplex(dev) < 0) - { netif_carrier_off(dev); } - else - { netif_carrier_on(dev); } - mod_timer(&tp->timer, RUN_AT(next_tick)); -} - diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h deleted file mode 100644 index ed66a16711d..00000000000 --- a/drivers/net/tulip/tulip.h +++ /dev/null @@ -1,575 +0,0 @@ -/* - drivers/net/tulip/tulip.h - - Copyright 2000,2001 The Linux Kernel Team - Written/copyright 1994-2001 by Donald Becker. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - - Please submit bugs to http://bugzilla.kernel.org/ . -*/ - -#ifndef __NET_TULIP_H__ -#define __NET_TULIP_H__ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/spinlock.h> -#include <linux/netdevice.h> -#include <linux/ethtool.h> -#include <linux/timer.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/unaligned.h> - - - -/* undefine, or define to various debugging levels (>4 == obscene levels) */ -#define TULIP_DEBUG 1 - -#ifdef CONFIG_TULIP_MMIO -#define TULIP_BAR 1 /* CBMA */ -#else -#define TULIP_BAR 0 /* CBIO */ -#endif - - - -struct tulip_chip_table { - char *chip_name; - int io_size; - int valid_intrs; /* CSR7 interrupt enable settings */ - int flags; - void (*media_timer) (unsigned long); - work_func_t media_task; -}; - - -enum tbl_flag { - HAS_MII = 0x00001, - HAS_MEDIA_TABLE = 0x00002, - CSR12_IN_SROM = 0x00004, - ALWAYS_CHECK_MII = 0x00008, - HAS_ACPI = 0x00010, - MC_HASH_ONLY = 0x00020, /* Hash-only multicast filter. */ - HAS_PNICNWAY = 0x00080, - HAS_NWAY = 0x00040, /* Uses internal NWay xcvr. */ - HAS_INTR_MITIGATION = 0x00100, - IS_ASIX = 0x00200, - HAS_8023X = 0x00400, - COMET_MAC_ADDR = 0x00800, - HAS_PCI_MWI = 0x01000, - HAS_PHY_IRQ = 0x02000, - HAS_SWAPPED_SEEPROM = 0x04000, - NEEDS_FAKE_MEDIA_TABLE = 0x08000, - COMET_PM = 0x10000, -}; - - -/* chip types. careful! order is VERY IMPORTANT here, as these - * are used throughout the driver as indices into arrays */ -/* Note 21142 == 21143. */ -enum chips { - DC21040 = 0, - DC21041 = 1, - DC21140 = 2, - DC21142 = 3, DC21143 = 3, - LC82C168, - MX98713, - MX98715, - MX98725, - AX88140, - PNIC2, - COMET, - COMPEX9881, - I21145, - DM910X, - CONEXANT, -}; - - -enum MediaIs { - MediaIsFD = 1, - MediaAlwaysFD = 2, - MediaIsMII = 4, - MediaIsFx = 8, - MediaIs100 = 16 -}; - - -/* Offsets to the Command and Status Registers, "CSRs". All accesses - must be longword instructions and quadword aligned. */ -enum tulip_offsets { - CSR0 = 0, - CSR1 = 0x08, - CSR2 = 0x10, - CSR3 = 0x18, - CSR4 = 0x20, - CSR5 = 0x28, - CSR6 = 0x30, - CSR7 = 0x38, - CSR8 = 0x40, - CSR9 = 0x48, - CSR10 = 0x50, - CSR11 = 0x58, - CSR12 = 0x60, - CSR13 = 0x68, - CSR14 = 0x70, - CSR15 = 0x78, - CSR18 = 0x88, - CSR19 = 0x8c, - CSR20 = 0x90, - CSR27 = 0xAC, - CSR28 = 0xB0, -}; - -/* register offset and bits for CFDD PCI config reg */ -enum pci_cfg_driver_reg { - CFDD = 0x40, - CFDD_Sleep = (1 << 31), - CFDD_Snooze = (1 << 30), -}; - -#define RxPollInt (RxIntr|RxNoBuf|RxDied|RxJabber) - -/* The bits in the CSR5 status registers, mostly interrupt sources. */ -enum status_bits { - TimerInt = 0x800, - SystemError = 0x2000, - TPLnkFail = 0x1000, - TPLnkPass = 0x10, - NormalIntr = 0x10000, - AbnormalIntr = 0x8000, - RxJabber = 0x200, - RxDied = 0x100, - RxNoBuf = 0x80, - RxIntr = 0x40, - TxFIFOUnderflow = 0x20, - RxErrIntr = 0x10, - TxJabber = 0x08, - TxNoBuf = 0x04, - TxDied = 0x02, - TxIntr = 0x01, -}; - -/* bit mask for CSR5 TX/RX process state */ -#define CSR5_TS 0x00700000 -#define CSR5_RS 0x000e0000 - -enum tulip_mode_bits { - TxThreshold = (1 << 22), - FullDuplex = (1 << 9), - TxOn = 0x2000, - AcceptBroadcast = 0x0100, - AcceptAllMulticast = 0x0080, - AcceptAllPhys = 0x0040, - AcceptRunt = 0x0008, - RxOn = 0x0002, - RxTx = (TxOn | RxOn), -}; - - -enum tulip_busconfig_bits { - MWI = (1 << 24), - MRL = (1 << 23), - MRM = (1 << 21), - CALShift = 14, - BurstLenShift = 8, -}; - - -/* The Tulip Rx and Tx buffer descriptors. */ -struct tulip_rx_desc { - __le32 status; - __le32 length; - __le32 buffer1; - __le32 buffer2; -}; - - -struct tulip_tx_desc { - __le32 status; - __le32 length; - __le32 buffer1; - __le32 buffer2; /* We use only buffer 1. */ -}; - - -enum desc_status_bits { - DescOwned = 0x80000000, - DescWholePkt = 0x60000000, - DescEndPkt = 0x40000000, - DescStartPkt = 0x20000000, - DescEndRing = 0x02000000, - DescUseLink = 0x01000000, - - /* - * Error summary flag is logical or of 'CRC Error', 'Collision Seen', - * 'Frame Too Long', 'Runt' and 'Descriptor Error' flags generated - * within tulip chip. - */ - RxDescErrorSummary = 0x8000, - RxDescCRCError = 0x0002, - RxDescCollisionSeen = 0x0040, - - /* - * 'Frame Too Long' flag is set if packet length including CRC exceeds - * 1518. However, a full sized VLAN tagged frame is 1522 bytes - * including CRC. - * - * The tulip chip does not block oversized frames, and if this flag is - * set on a receive descriptor it does not indicate the frame has been - * truncated. The receive descriptor also includes the actual length. - * Therefore we can safety ignore this flag and check the length - * ourselves. - */ - RxDescFrameTooLong = 0x0080, - RxDescRunt = 0x0800, - RxDescDescErr = 0x4000, - RxWholePkt = 0x00000300, - /* - * Top three bits of 14 bit frame length (status bits 27-29) should - * never be set as that would make frame over 2047 bytes. The Receive - * Watchdog flag (bit 4) may indicate the length is over 2048 and the - * length field is invalid. - */ - RxLengthOver2047 = 0x38000010 -}; - - -enum t21143_csr6_bits { - csr6_sc = (1<<31), - csr6_ra = (1<<30), - csr6_ign_dest_msb = (1<<26), - csr6_mbo = (1<<25), - csr6_scr = (1<<24), /* scramble mode flag: can't be set */ - csr6_pcs = (1<<23), /* Enables PCS functions (symbol mode requires csr6_ps be set) default is set */ - csr6_ttm = (1<<22), /* Transmit Threshold Mode, set for 10baseT, 0 for 100BaseTX */ - csr6_sf = (1<<21), /* Store and forward. If set ignores TR bits */ - csr6_hbd = (1<<19), /* Heart beat disable. Disables SQE function in 10baseT */ - csr6_ps = (1<<18), /* Port Select. 0 (defualt) = 10baseT, 1 = 100baseTX: can't be set */ - csr6_ca = (1<<17), /* Collision Offset Enable. If set uses special algorithm in low collision situations */ - csr6_trh = (1<<15), /* Transmit Threshold high bit */ - csr6_trl = (1<<14), /* Transmit Threshold low bit */ - - /*************************************************************** - * This table shows transmit threshold values based on media * - * and these two registers (from PNIC1 & 2 docs) Note: this is * - * all meaningless if sf is set. * - ***************************************************************/ - - /*********************************** - * (trh,trl) * 100BaseTX * 10BaseT * - *********************************** - * (0,0) * 128 * 72 * - * (0,1) * 256 * 96 * - * (1,0) * 512 * 128 * - * (1,1) * 1024 * 160 * - ***********************************/ - - csr6_fc = (1<<12), /* Forces a collision in next transmission (for testing in loopback mode) */ - csr6_om_int_loop = (1<<10), /* internal (FIFO) loopback flag */ - csr6_om_ext_loop = (1<<11), /* external (PMD) loopback flag */ - /* set both and you get (PHY) loopback */ - csr6_fd = (1<<9), /* Full duplex mode, disables hearbeat, no loopback */ - csr6_pm = (1<<7), /* Pass All Multicast */ - csr6_pr = (1<<6), /* Promiscuous mode */ - csr6_sb = (1<<5), /* Start(1)/Stop(0) backoff counter */ - csr6_if = (1<<4), /* Inverse Filtering, rejects only addresses in address table: can't be set */ - csr6_pb = (1<<3), /* Pass Bad Frames, (1) causes even bad frames to be passed on */ - csr6_ho = (1<<2), /* Hash-only filtering mode: can't be set */ - csr6_hp = (1<<0), /* Hash/Perfect Receive Filtering Mode: can't be set */ - - csr6_mask_capture = (csr6_sc | csr6_ca), - csr6_mask_defstate = (csr6_mask_capture | csr6_mbo), - csr6_mask_hdcap = (csr6_mask_defstate | csr6_hbd | csr6_ps), - csr6_mask_hdcaptt = (csr6_mask_hdcap | csr6_trh | csr6_trl), - csr6_mask_fullcap = (csr6_mask_hdcaptt | csr6_fd), - csr6_mask_fullpromisc = (csr6_pr | csr6_pm), - csr6_mask_filters = (csr6_hp | csr6_ho | csr6_if), - csr6_mask_100bt = (csr6_scr | csr6_pcs | csr6_hbd), -}; - -enum tulip_comet_csr13_bits { -/* The LINKOFFE and LINKONE work in conjunction with LSCE, i.e. they - * determine which link status transition wakes up if LSCE is - * enabled */ - comet_csr13_linkoffe = (1 << 17), - comet_csr13_linkone = (1 << 16), - comet_csr13_wfre = (1 << 10), - comet_csr13_mpre = (1 << 9), - comet_csr13_lsce = (1 << 8), - comet_csr13_wfr = (1 << 2), - comet_csr13_mpr = (1 << 1), - comet_csr13_lsc = (1 << 0), -}; - -enum tulip_comet_csr18_bits { - comet_csr18_pmes_sticky = (1 << 24), - comet_csr18_pm_mode = (1 << 19), - comet_csr18_apm_mode = (1 << 18), - comet_csr18_d3a = (1 << 7) -}; - -enum tulip_comet_csr20_bits { - comet_csr20_pmes = (1 << 15), -}; - -/* Keep the ring sizes a power of two for efficiency. - Making the Tx ring too large decreases the effectiveness of channel - bonding and packet priority. - There are no ill effects from too-large receive rings. */ - -#define TX_RING_SIZE 32 -#define RX_RING_SIZE 128 -#define MEDIA_MASK 31 - -/* The receiver on the DC21143 rev 65 can fail to close the last - * receive descriptor in certain circumstances (see errata) when - * using MWI. This can only occur if the receive buffer ends on - * a cache line boundary, so the "+ 4" below ensures it doesn't. - */ -#define PKT_BUF_SZ (1536 + 4) /* Size of each temporary Rx buffer. */ - -#define TULIP_MIN_CACHE_LINE 8 /* in units of 32-bit words */ - -#if defined(__sparc__) || defined(__hppa__) -/* The UltraSparc PCI controllers will disconnect at every 64-byte - * crossing anyways so it makes no sense to tell Tulip to burst - * any more than that. - */ -#define TULIP_MAX_CACHE_LINE 16 /* in units of 32-bit words */ -#else -#define TULIP_MAX_CACHE_LINE 32 /* in units of 32-bit words */ -#endif - - -/* Ring-wrap flag in length field, use for last ring entry. - 0x01000000 means chain on buffer2 address, - 0x02000000 means use the ring start address in CSR2/3. - Note: Some work-alike chips do not function correctly in chained mode. - The ASIX chip works only in chained mode. - Thus we indicates ring mode, but always write the 'next' field for - chained mode as well. -*/ -#define DESC_RING_WRAP 0x02000000 - - -#define EEPROM_SIZE 512 /* 2 << EEPROM_ADDRLEN */ - - -#define RUN_AT(x) (jiffies + (x)) - -#define get_u16(ptr) get_unaligned_le16((ptr)) - -struct medialeaf { - u8 type; - u8 media; - unsigned char *leafdata; -}; - - -struct mediatable { - u16 defaultmedia; - u8 leafcount; - u8 csr12dir; /* General purpose pin directions. */ - unsigned has_mii:1; - unsigned has_nonmii:1; - unsigned has_reset:6; - u32 csr15dir; - u32 csr15val; /* 21143 NWay setting. */ - struct medialeaf mleaf[0]; -}; - - -struct mediainfo { - struct mediainfo *next; - int info_type; - int index; - unsigned char *info; -}; - -struct ring_info { - struct sk_buff *skb; - dma_addr_t mapping; -}; - - -struct tulip_private { - const char *product_name; - struct net_device *next_module; - struct tulip_rx_desc *rx_ring; - struct tulip_tx_desc *tx_ring; - dma_addr_t rx_ring_dma; - dma_addr_t tx_ring_dma; - /* The saved address of a sent-in-place packet/buffer, for skfree(). */ - struct ring_info tx_buffers[TX_RING_SIZE]; - /* The addresses of receive-in-place skbuffs. */ - struct ring_info rx_buffers[RX_RING_SIZE]; - u16 setup_frame[96]; /* Pseudo-Tx frame to init address table. */ - int chip_id; - int revision; - int flags; - struct napi_struct napi; - struct timer_list timer; /* Media selection timer. */ - struct timer_list oom_timer; /* Out of memory timer. */ - u32 mc_filter[2]; - spinlock_t lock; - spinlock_t mii_lock; - unsigned int cur_rx, cur_tx; /* The next free ring entry */ - unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */ - -#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION - int mit_on; -#endif - unsigned int full_duplex:1; /* Full-duplex operation requested. */ - unsigned int full_duplex_lock:1; - unsigned int fake_addr:1; /* Multiport board faked address. */ - unsigned int default_port:4; /* Last dev->if_port value. */ - unsigned int media2:4; /* Secondary monitored media port. */ - unsigned int medialock:1; /* Don't sense media type. */ - unsigned int mediasense:1; /* Media sensing in progress. */ - unsigned int nway:1, nwayset:1; /* 21143 internal NWay. */ - unsigned int timeout_recovery:1; - unsigned int csr0; /* CSR0 setting. */ - unsigned int csr6; /* Current CSR6 control settings. */ - unsigned char eeprom[EEPROM_SIZE]; /* Serial EEPROM contents. */ - void (*link_change) (struct net_device * dev, int csr5); - struct ethtool_wolinfo wolinfo; /* WOL settings */ - u16 sym_advertise, mii_advertise; /* NWay capabilities advertised. */ - u16 lpar; /* 21143 Link partner ability. */ - u16 advertising[4]; - signed char phys[4], mii_cnt; /* MII device addresses. */ - struct mediatable *mtable; - int cur_index; /* Current media index. */ - int saved_if_port; - struct pci_dev *pdev; - int ttimer; - int susp_rx; - unsigned long nir; - void __iomem *base_addr; - int csr12_shadow; - int pad0; /* Used for 8-byte alignment */ - struct work_struct media_work; - struct net_device *dev; -}; - - -struct eeprom_fixup { - char *name; - unsigned char addr0; - unsigned char addr1; - unsigned char addr2; - u16 newtable[32]; /* Max length below. */ -}; - - -/* 21142.c */ -extern u16 t21142_csr14[]; -void t21142_media_task(struct work_struct *work); -void t21142_start_nway(struct net_device *dev); -void t21142_lnk_change(struct net_device *dev, int csr5); - - -/* PNIC2.c */ -void pnic2_lnk_change(struct net_device *dev, int csr5); -void pnic2_timer(unsigned long data); -void pnic2_start_nway(struct net_device *dev); -void pnic2_lnk_change(struct net_device *dev, int csr5); - -/* eeprom.c */ -void tulip_parse_eeprom(struct net_device *dev); -int tulip_read_eeprom(struct net_device *dev, int location, int addr_len); - -/* interrupt.c */ -extern unsigned int tulip_max_interrupt_work; -extern int tulip_rx_copybreak; -irqreturn_t tulip_interrupt(int irq, void *dev_instance); -int tulip_refill_rx(struct net_device *dev); -#ifdef CONFIG_TULIP_NAPI -int tulip_poll(struct napi_struct *napi, int budget); -#endif - - -/* media.c */ -int tulip_mdio_read(struct net_device *dev, int phy_id, int location); -void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int value); -void tulip_select_media(struct net_device *dev, int startup); -int tulip_check_duplex(struct net_device *dev); -void tulip_find_mii (struct net_device *dev, int board_idx); - -/* pnic.c */ -void pnic_do_nway(struct net_device *dev); -void pnic_lnk_change(struct net_device *dev, int csr5); -void pnic_timer(unsigned long data); - -/* timer.c */ -void tulip_media_task(struct work_struct *work); -void mxic_timer(unsigned long data); -void comet_timer(unsigned long data); - -/* tulip_core.c */ -extern int tulip_debug; -extern const char * const medianame[]; -extern const char tulip_media_cap[]; -extern struct tulip_chip_table tulip_tbl[]; -void oom_timer(unsigned long data); -extern u8 t21040_csr13[]; - -static inline void tulip_start_rxtx(struct tulip_private *tp) -{ - void __iomem *ioaddr = tp->base_addr; - iowrite32(tp->csr6 | RxTx, ioaddr + CSR6); - barrier(); - (void) ioread32(ioaddr + CSR6); /* mmio sync */ -} - -static inline void tulip_stop_rxtx(struct tulip_private *tp) -{ - void __iomem *ioaddr = tp->base_addr; - u32 csr6 = ioread32(ioaddr + CSR6); - - if (csr6 & RxTx) { - unsigned i=1300/10; - iowrite32(csr6 & ~RxTx, ioaddr + CSR6); - barrier(); - /* wait until in-flight frame completes. - * Max time @ 10BT: 1500*8b/10Mbps == 1200us (+ 100us margin) - * Typically expect this loop to end in < 50 us on 100BT. - */ - while (--i && (ioread32(ioaddr + CSR5) & (CSR5_TS|CSR5_RS))) - udelay(10); - - if (!i) - printk(KERN_DEBUG "%s: tulip_stop_rxtx() failed" - " (CSR5 0x%x CSR6 0x%x)\n", - pci_name(tp->pdev), - ioread32(ioaddr + CSR5), - ioread32(ioaddr + CSR6)); - } -} - -static inline void tulip_restart_rxtx(struct tulip_private *tp) -{ - tulip_stop_rxtx(tp); - udelay(5); - tulip_start_rxtx(tp); -} - -static inline void tulip_tx_timeout_complete(struct tulip_private *tp, void __iomem *ioaddr) -{ - /* Stop and restart the chip's Tx processes. */ - tulip_restart_rxtx(tp); - /* Trigger an immediate transmit demand. */ - iowrite32(0, ioaddr + CSR1); - - tp->dev->stats.tx_errors++; -} - -#endif /* __NET_TULIP_H__ */ diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c deleted file mode 100644 index 2c39f259121..00000000000 --- a/drivers/net/tulip/tulip_core.c +++ /dev/null @@ -1,2011 +0,0 @@ -/* tulip_core.c: A DEC 21x4x-family ethernet driver for Linux. - - Copyright 2000,2001 The Linux Kernel Team - Written/copyright 1994-2001 by Donald Becker. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - - Please submit bugs to http://bugzilla.kernel.org/ . -*/ - - -#define DRV_NAME "tulip" -#ifdef CONFIG_TULIP_NAPI -#define DRV_VERSION "1.1.15-NAPI" /* Keep at least for test */ -#else -#define DRV_VERSION "1.1.15" -#endif -#define DRV_RELDATE "Feb 27, 2007" - - -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include "tulip.h" -#include <linux/init.h> -#include <linux/etherdevice.h> -#include <linux/delay.h> -#include <linux/mii.h> -#include <linux/crc32.h> -#include <asm/unaligned.h> -#include <asm/uaccess.h> - -#ifdef CONFIG_SPARC -#include <asm/prom.h> -#endif - -static char version[] __devinitdata = - "Linux Tulip driver version " DRV_VERSION " (" DRV_RELDATE ")\n"; - -/* A few user-configurable values. */ - -/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ -static unsigned int max_interrupt_work = 25; - -#define MAX_UNITS 8 -/* Used to pass the full-duplex flag, etc. */ -static int full_duplex[MAX_UNITS]; -static int options[MAX_UNITS]; -static int mtu[MAX_UNITS]; /* Jumbo MTU for interfaces. */ - -/* The possible media types that can be set in options[] are: */ -const char * const medianame[32] = { - "10baseT", "10base2", "AUI", "100baseTx", - "10baseT-FDX", "100baseTx-FDX", "100baseT4", "100baseFx", - "100baseFx-FDX", "MII 10baseT", "MII 10baseT-FDX", "MII", - "10baseT(forced)", "MII 100baseTx", "MII 100baseTx-FDX", "MII 100baseT4", - "MII 100baseFx-HDX", "MII 100baseFx-FDX", "Home-PNA 1Mbps", "Invalid-19", - "","","","", "","","","", "","","","Transceiver reset", -}; - -/* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */ -#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \ - defined(CONFIG_SPARC) || defined(__ia64__) || \ - defined(__sh__) || defined(__mips__) -static int rx_copybreak = 1518; -#else -static int rx_copybreak = 100; -#endif - -/* - Set the bus performance register. - Typical: Set 16 longword cache alignment, no burst limit. - Cache alignment bits 15:14 Burst length 13:8 - 0000 No alignment 0x00000000 unlimited 0800 8 longwords - 4000 8 longwords 0100 1 longword 1000 16 longwords - 8000 16 longwords 0200 2 longwords 2000 32 longwords - C000 32 longwords 0400 4 longwords - Warning: many older 486 systems are broken and require setting 0x00A04800 - 8 longword cache alignment, 8 longword burst. - ToDo: Non-Intel setting could be better. -*/ - -#if defined(__alpha__) || defined(__ia64__) -static int csr0 = 0x01A00000 | 0xE000; -#elif defined(__i386__) || defined(__powerpc__) || defined(__x86_64__) -static int csr0 = 0x01A00000 | 0x8000; -#elif defined(CONFIG_SPARC) || defined(__hppa__) -/* The UltraSparc PCI controllers will disconnect at every 64-byte - * crossing anyways so it makes no sense to tell Tulip to burst - * any more than that. - */ -static int csr0 = 0x01A00000 | 0x9000; -#elif defined(__arm__) || defined(__sh__) -static int csr0 = 0x01A00000 | 0x4800; -#elif defined(__mips__) -static int csr0 = 0x00200000 | 0x4000; -#else -#warning Processor architecture undefined! -static int csr0 = 0x00A00000 | 0x4800; -#endif - -/* Operational parameters that usually are not changed. */ -/* Time in jiffies before concluding the transmitter is hung. */ -#define TX_TIMEOUT (4*HZ) - - -MODULE_AUTHOR("The Linux Kernel Team"); -MODULE_DESCRIPTION("Digital 21*4* Tulip ethernet driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); -module_param(tulip_debug, int, 0); -module_param(max_interrupt_work, int, 0); -module_param(rx_copybreak, int, 0); -module_param(csr0, int, 0); -module_param_array(options, int, NULL, 0); -module_param_array(full_duplex, int, NULL, 0); - -#define PFX DRV_NAME ": " - -#ifdef TULIP_DEBUG -int tulip_debug = TULIP_DEBUG; -#else -int tulip_debug = 1; -#endif - -static void tulip_timer(unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - struct tulip_private *tp = netdev_priv(dev); - - if (netif_running(dev)) - schedule_work(&tp->media_work); -} - -/* - * This table use during operation for capabilities and media timer. - * - * It is indexed via the values in 'enum chips' - */ - -struct tulip_chip_table tulip_tbl[] = { - { }, /* placeholder for array, slot unused currently */ - { }, /* placeholder for array, slot unused currently */ - - /* DC21140 */ - { "Digital DS21140 Tulip", 128, 0x0001ebef, - HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_PCI_MWI, tulip_timer, - tulip_media_task }, - - /* DC21142, DC21143 */ - { "Digital DS21142/43 Tulip", 128, 0x0801fbff, - HAS_MII | HAS_MEDIA_TABLE | ALWAYS_CHECK_MII | HAS_ACPI | HAS_NWAY - | HAS_INTR_MITIGATION | HAS_PCI_MWI, tulip_timer, t21142_media_task }, - - /* LC82C168 */ - { "Lite-On 82c168 PNIC", 256, 0x0001fbef, - HAS_MII | HAS_PNICNWAY, pnic_timer, }, - - /* MX98713 */ - { "Macronix 98713 PMAC", 128, 0x0001ebef, - HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM, mxic_timer, }, - - /* MX98715 */ - { "Macronix 98715 PMAC", 256, 0x0001ebef, - HAS_MEDIA_TABLE, mxic_timer, }, - - /* MX98725 */ - { "Macronix 98725 PMAC", 256, 0x0001ebef, - HAS_MEDIA_TABLE, mxic_timer, }, - - /* AX88140 */ - { "ASIX AX88140", 128, 0x0001fbff, - HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | MC_HASH_ONLY - | IS_ASIX, tulip_timer, tulip_media_task }, - - /* PNIC2 */ - { "Lite-On PNIC-II", 256, 0x0801fbff, - HAS_MII | HAS_NWAY | HAS_8023X | HAS_PCI_MWI, pnic2_timer, }, - - /* COMET */ - { "ADMtek Comet", 256, 0x0001abef, - HAS_MII | MC_HASH_ONLY | COMET_MAC_ADDR, comet_timer, }, - - /* COMPEX9881 */ - { "Compex 9881 PMAC", 128, 0x0001ebef, - HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM, mxic_timer, }, - - /* I21145 */ - { "Intel DS21145 Tulip", 128, 0x0801fbff, - HAS_MII | HAS_MEDIA_TABLE | ALWAYS_CHECK_MII | HAS_ACPI - | HAS_NWAY | HAS_PCI_MWI, tulip_timer, tulip_media_task }, - - /* DM910X */ -#ifdef CONFIG_TULIP_DM910X - { "Davicom DM9102/DM9102A", 128, 0x0001ebef, - HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, - tulip_timer, tulip_media_task }, -#else - { NULL }, -#endif - - /* RS7112 */ - { "Conexant LANfinity", 256, 0x0001ebef, - HAS_MII | HAS_ACPI, tulip_timer, tulip_media_task }, - -}; - - -static DEFINE_PCI_DEVICE_TABLE(tulip_pci_tbl) = { - { 0x1011, 0x0009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21140 }, - { 0x1011, 0x0019, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21143 }, - { 0x11AD, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, LC82C168 }, - { 0x10d9, 0x0512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98713 }, - { 0x10d9, 0x0531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 }, -/* { 0x10d9, 0x0531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98725 },*/ - { 0x125B, 0x1400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AX88140 }, - { 0x11AD, 0xc115, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PNIC2 }, - { 0x1317, 0x0981, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x1317, 0x0985, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x1317, 0x1985, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x1317, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x13D1, 0xAB02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x13D1, 0xAB03, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x13D1, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x104A, 0x0981, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x104A, 0x2774, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x1259, 0xa120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x11F6, 0x9881, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMPEX9881 }, - { 0x8086, 0x0039, PCI_ANY_ID, PCI_ANY_ID, 0, 0, I21145 }, -#ifdef CONFIG_TULIP_DM910X - { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X }, - { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X }, -#endif - { 0x1113, 0x1216, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x1113, 0x1217, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 }, - { 0x1113, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x1186, 0x1541, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x1186, 0x1561, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x1186, 0x1591, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x14f1, 0x1803, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CONEXANT }, - { 0x1626, 0x8410, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x1737, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */ - { 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */ - { 0x1414, 0x0001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Microsoft MN-120 */ - { 0x1414, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { } /* terminate list */ -}; -MODULE_DEVICE_TABLE(pci, tulip_pci_tbl); - - -/* A full-duplex map for media types. */ -const char tulip_media_cap[32] = -{0,0,0,16, 3,19,16,24, 27,4,7,5, 0,20,23,20, 28,31,0,0, }; - -static void tulip_tx_timeout(struct net_device *dev); -static void tulip_init_ring(struct net_device *dev); -static void tulip_free_ring(struct net_device *dev); -static netdev_tx_t tulip_start_xmit(struct sk_buff *skb, - struct net_device *dev); -static int tulip_open(struct net_device *dev); -static int tulip_close(struct net_device *dev); -static void tulip_up(struct net_device *dev); -static void tulip_down(struct net_device *dev); -static struct net_device_stats *tulip_get_stats(struct net_device *dev); -static int private_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static void set_rx_mode(struct net_device *dev); -static void tulip_set_wolopts(struct pci_dev *pdev, u32 wolopts); -#ifdef CONFIG_NET_POLL_CONTROLLER -static void poll_tulip(struct net_device *dev); -#endif - -static void tulip_set_power_state (struct tulip_private *tp, - int sleep, int snooze) -{ - if (tp->flags & HAS_ACPI) { - u32 tmp, newtmp; - pci_read_config_dword (tp->pdev, CFDD, &tmp); - newtmp = tmp & ~(CFDD_Sleep | CFDD_Snooze); - if (sleep) - newtmp |= CFDD_Sleep; - else if (snooze) - newtmp |= CFDD_Snooze; - if (tmp != newtmp) - pci_write_config_dword (tp->pdev, CFDD, newtmp); - } - -} - - -static void tulip_up(struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - int next_tick = 3*HZ; - u32 reg; - int i; - -#ifdef CONFIG_TULIP_NAPI - napi_enable(&tp->napi); -#endif - - /* Wake the chip from sleep/snooze mode. */ - tulip_set_power_state (tp, 0, 0); - - /* Disable all WOL events */ - pci_enable_wake(tp->pdev, PCI_D3hot, 0); - pci_enable_wake(tp->pdev, PCI_D3cold, 0); - tulip_set_wolopts(tp->pdev, 0); - - /* On some chip revs we must set the MII/SYM port before the reset!? */ - if (tp->mii_cnt || (tp->mtable && tp->mtable->has_mii)) - iowrite32(0x00040000, ioaddr + CSR6); - - /* Reset the chip, holding bit 0 set at least 50 PCI cycles. */ - iowrite32(0x00000001, ioaddr + CSR0); - pci_read_config_dword(tp->pdev, PCI_COMMAND, ®); /* flush write */ - udelay(100); - - /* Deassert reset. - Wait the specified 50 PCI cycles after a reset by initializing - Tx and Rx queues and the address filter list. */ - iowrite32(tp->csr0, ioaddr + CSR0); - pci_read_config_dword(tp->pdev, PCI_COMMAND, ®); /* flush write */ - udelay(100); - - if (tulip_debug > 1) - printk(KERN_DEBUG "%s: tulip_up(), irq==%d\n", - dev->name, dev->irq); - - iowrite32(tp->rx_ring_dma, ioaddr + CSR3); - iowrite32(tp->tx_ring_dma, ioaddr + CSR4); - tp->cur_rx = tp->cur_tx = 0; - tp->dirty_rx = tp->dirty_tx = 0; - - if (tp->flags & MC_HASH_ONLY) { - u32 addr_low = get_unaligned_le32(dev->dev_addr); - u32 addr_high = get_unaligned_le16(dev->dev_addr + 4); - if (tp->chip_id == AX88140) { - iowrite32(0, ioaddr + CSR13); - iowrite32(addr_low, ioaddr + CSR14); - iowrite32(1, ioaddr + CSR13); - iowrite32(addr_high, ioaddr + CSR14); - } else if (tp->flags & COMET_MAC_ADDR) { - iowrite32(addr_low, ioaddr + 0xA4); - iowrite32(addr_high, ioaddr + 0xA8); - iowrite32(0, ioaddr + CSR27); - iowrite32(0, ioaddr + CSR28); - } - } else { - /* This is set_rx_mode(), but without starting the transmitter. */ - u16 *eaddrs = (u16 *)dev->dev_addr; - u16 *setup_frm = &tp->setup_frame[15*6]; - dma_addr_t mapping; - - /* 21140 bug: you must add the broadcast address. */ - memset(tp->setup_frame, 0xff, sizeof(tp->setup_frame)); - /* Fill the final entry of the table with our physical address. */ - *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0]; - *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1]; - *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2]; - - mapping = pci_map_single(tp->pdev, tp->setup_frame, - sizeof(tp->setup_frame), - PCI_DMA_TODEVICE); - tp->tx_buffers[tp->cur_tx].skb = NULL; - tp->tx_buffers[tp->cur_tx].mapping = mapping; - - /* Put the setup frame on the Tx list. */ - tp->tx_ring[tp->cur_tx].length = cpu_to_le32(0x08000000 | 192); - tp->tx_ring[tp->cur_tx].buffer1 = cpu_to_le32(mapping); - tp->tx_ring[tp->cur_tx].status = cpu_to_le32(DescOwned); - - tp->cur_tx++; - } - - tp->saved_if_port = dev->if_port; - if (dev->if_port == 0) - dev->if_port = tp->default_port; - - /* Allow selecting a default media. */ - i = 0; - if (tp->mtable == NULL) - goto media_picked; - if (dev->if_port) { - int looking_for = tulip_media_cap[dev->if_port] & MediaIsMII ? 11 : - (dev->if_port == 12 ? 0 : dev->if_port); - for (i = 0; i < tp->mtable->leafcount; i++) - if (tp->mtable->mleaf[i].media == looking_for) { - dev_info(&dev->dev, - "Using user-specified media %s\n", - medianame[dev->if_port]); - goto media_picked; - } - } - if ((tp->mtable->defaultmedia & 0x0800) == 0) { - int looking_for = tp->mtable->defaultmedia & MEDIA_MASK; - for (i = 0; i < tp->mtable->leafcount; i++) - if (tp->mtable->mleaf[i].media == looking_for) { - dev_info(&dev->dev, - "Using EEPROM-set media %s\n", - medianame[looking_for]); - goto media_picked; - } - } - /* Start sensing first non-full-duplex media. */ - for (i = tp->mtable->leafcount - 1; - (tulip_media_cap[tp->mtable->mleaf[i].media] & MediaAlwaysFD) && i > 0; i--) - ; -media_picked: - - tp->csr6 = 0; - tp->cur_index = i; - tp->nwayset = 0; - - if (dev->if_port) { - if (tp->chip_id == DC21143 && - (tulip_media_cap[dev->if_port] & MediaIsMII)) { - /* We must reset the media CSRs when we force-select MII mode. */ - iowrite32(0x0000, ioaddr + CSR13); - iowrite32(0x0000, ioaddr + CSR14); - iowrite32(0x0008, ioaddr + CSR15); - } - tulip_select_media(dev, 1); - } else if (tp->chip_id == DC21142) { - if (tp->mii_cnt) { - tulip_select_media(dev, 1); - if (tulip_debug > 1) - dev_info(&dev->dev, - "Using MII transceiver %d, status %04x\n", - tp->phys[0], - tulip_mdio_read(dev, tp->phys[0], 1)); - iowrite32(csr6_mask_defstate, ioaddr + CSR6); - tp->csr6 = csr6_mask_hdcap; - dev->if_port = 11; - iowrite32(0x0000, ioaddr + CSR13); - iowrite32(0x0000, ioaddr + CSR14); - } else - t21142_start_nway(dev); - } else if (tp->chip_id == PNIC2) { - /* for initial startup advertise 10/100 Full and Half */ - tp->sym_advertise = 0x01E0; - /* enable autonegotiate end interrupt */ - iowrite32(ioread32(ioaddr+CSR5)| 0x00008010, ioaddr + CSR5); - iowrite32(ioread32(ioaddr+CSR7)| 0x00008010, ioaddr + CSR7); - pnic2_start_nway(dev); - } else if (tp->chip_id == LC82C168 && ! tp->medialock) { - if (tp->mii_cnt) { - dev->if_port = 11; - tp->csr6 = 0x814C0000 | (tp->full_duplex ? 0x0200 : 0); - iowrite32(0x0001, ioaddr + CSR15); - } else if (ioread32(ioaddr + CSR5) & TPLnkPass) - pnic_do_nway(dev); - else { - /* Start with 10mbps to do autonegotiation. */ - iowrite32(0x32, ioaddr + CSR12); - tp->csr6 = 0x00420000; - iowrite32(0x0001B078, ioaddr + 0xB8); - iowrite32(0x0201B078, ioaddr + 0xB8); - next_tick = 1*HZ; - } - } else if ((tp->chip_id == MX98713 || tp->chip_id == COMPEX9881) && - ! tp->medialock) { - dev->if_port = 0; - tp->csr6 = 0x01880000 | (tp->full_duplex ? 0x0200 : 0); - iowrite32(0x0f370000 | ioread16(ioaddr + 0x80), ioaddr + 0x80); - } else if (tp->chip_id == MX98715 || tp->chip_id == MX98725) { - /* Provided by BOLO, Macronix - 12/10/1998. */ - dev->if_port = 0; - tp->csr6 = 0x01a80200; - iowrite32(0x0f370000 | ioread16(ioaddr + 0x80), ioaddr + 0x80); - iowrite32(0x11000 | ioread16(ioaddr + 0xa0), ioaddr + 0xa0); - } else if (tp->chip_id == COMET || tp->chip_id == CONEXANT) { - /* Enable automatic Tx underrun recovery. */ - iowrite32(ioread32(ioaddr + 0x88) | 1, ioaddr + 0x88); - dev->if_port = tp->mii_cnt ? 11 : 0; - tp->csr6 = 0x00040000; - } else if (tp->chip_id == AX88140) { - tp->csr6 = tp->mii_cnt ? 0x00040100 : 0x00000100; - } else - tulip_select_media(dev, 1); - - /* Start the chip's Tx to process setup frame. */ - tulip_stop_rxtx(tp); - barrier(); - udelay(5); - iowrite32(tp->csr6 | TxOn, ioaddr + CSR6); - - /* Enable interrupts by setting the interrupt mask. */ - iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR5); - iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7); - tulip_start_rxtx(tp); - iowrite32(0, ioaddr + CSR2); /* Rx poll demand */ - - if (tulip_debug > 2) { - printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n", - dev->name, ioread32(ioaddr + CSR0), - ioread32(ioaddr + CSR5), - ioread32(ioaddr + CSR6)); - } - - /* Set the timer to switch to check for link beat and perhaps switch - to an alternate media type. */ - tp->timer.expires = RUN_AT(next_tick); - add_timer(&tp->timer); -#ifdef CONFIG_TULIP_NAPI - init_timer(&tp->oom_timer); - tp->oom_timer.data = (unsigned long)dev; - tp->oom_timer.function = oom_timer; -#endif -} - -static int -tulip_open(struct net_device *dev) -{ - int retval; - - tulip_init_ring (dev); - - retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev); - if (retval) - goto free_ring; - - tulip_up (dev); - - netif_start_queue (dev); - - return 0; - -free_ring: - tulip_free_ring (dev); - return retval; -} - - -static void tulip_tx_timeout(struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - unsigned long flags; - - spin_lock_irqsave (&tp->lock, flags); - - if (tulip_media_cap[dev->if_port] & MediaIsMII) { - /* Do nothing -- the media monitor should handle this. */ - if (tulip_debug > 1) - dev_warn(&dev->dev, - "Transmit timeout using MII device\n"); - } else if (tp->chip_id == DC21140 || tp->chip_id == DC21142 || - tp->chip_id == MX98713 || tp->chip_id == COMPEX9881 || - tp->chip_id == DM910X) { - dev_warn(&dev->dev, - "21140 transmit timed out, status %08x, SIA %08x %08x %08x %08x, resetting...\n", - ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12), - ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14), - ioread32(ioaddr + CSR15)); - tp->timeout_recovery = 1; - schedule_work(&tp->media_work); - goto out_unlock; - } else if (tp->chip_id == PNIC2) { - dev_warn(&dev->dev, - "PNIC2 transmit timed out, status %08x, CSR6/7 %08x / %08x CSR12 %08x, resetting...\n", - (int)ioread32(ioaddr + CSR5), - (int)ioread32(ioaddr + CSR6), - (int)ioread32(ioaddr + CSR7), - (int)ioread32(ioaddr + CSR12)); - } else { - dev_warn(&dev->dev, - "Transmit timed out, status %08x, CSR12 %08x, resetting...\n", - ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12)); - dev->if_port = 0; - } - -#if defined(way_too_many_messages) - if (tulip_debug > 3) { - int i; - for (i = 0; i < RX_RING_SIZE; i++) { - u8 *buf = (u8 *)(tp->rx_ring[i].buffer1); - int j; - printk(KERN_DEBUG - "%2d: %08x %08x %08x %08x %02x %02x %02x\n", - i, - (unsigned int)tp->rx_ring[i].status, - (unsigned int)tp->rx_ring[i].length, - (unsigned int)tp->rx_ring[i].buffer1, - (unsigned int)tp->rx_ring[i].buffer2, - buf[0], buf[1], buf[2]); - for (j = 0; buf[j] != 0xee && j < 1600; j++) - if (j < 100) - pr_cont(" %02x", buf[j]); - pr_cont(" j=%d\n", j); - } - printk(KERN_DEBUG " Rx ring %p: ", tp->rx_ring); - for (i = 0; i < RX_RING_SIZE; i++) - pr_cont(" %08x", (unsigned int)tp->rx_ring[i].status); - printk(KERN_DEBUG " Tx ring %p: ", tp->tx_ring); - for (i = 0; i < TX_RING_SIZE; i++) - pr_cont(" %08x", (unsigned int)tp->tx_ring[i].status); - pr_cont("\n"); - } -#endif - - tulip_tx_timeout_complete(tp, ioaddr); - -out_unlock: - spin_unlock_irqrestore (&tp->lock, flags); - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue (dev); -} - - -/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ -static void tulip_init_ring(struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - int i; - - tp->susp_rx = 0; - tp->ttimer = 0; - tp->nir = 0; - - for (i = 0; i < RX_RING_SIZE; i++) { - tp->rx_ring[i].status = 0x00000000; - tp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ); - tp->rx_ring[i].buffer2 = cpu_to_le32(tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * (i + 1)); - tp->rx_buffers[i].skb = NULL; - tp->rx_buffers[i].mapping = 0; - } - /* Mark the last entry as wrapping the ring. */ - tp->rx_ring[i-1].length = cpu_to_le32(PKT_BUF_SZ | DESC_RING_WRAP); - tp->rx_ring[i-1].buffer2 = cpu_to_le32(tp->rx_ring_dma); - - for (i = 0; i < RX_RING_SIZE; i++) { - dma_addr_t mapping; - - /* Note the receive buffer must be longword aligned. - dev_alloc_skb() provides 16 byte alignment. But do *not* - use skb_reserve() to align the IP header! */ - struct sk_buff *skb = dev_alloc_skb(PKT_BUF_SZ); - tp->rx_buffers[i].skb = skb; - if (skb == NULL) - break; - mapping = pci_map_single(tp->pdev, skb->data, - PKT_BUF_SZ, PCI_DMA_FROMDEVICE); - tp->rx_buffers[i].mapping = mapping; - skb->dev = dev; /* Mark as being used by this device. */ - tp->rx_ring[i].status = cpu_to_le32(DescOwned); /* Owned by Tulip chip */ - tp->rx_ring[i].buffer1 = cpu_to_le32(mapping); - } - tp->dirty_rx = (unsigned int)(i - RX_RING_SIZE); - - /* The Tx buffer descriptor is filled in as needed, but we - do need to clear the ownership bit. */ - for (i = 0; i < TX_RING_SIZE; i++) { - tp->tx_buffers[i].skb = NULL; - tp->tx_buffers[i].mapping = 0; - tp->tx_ring[i].status = 0x00000000; - tp->tx_ring[i].buffer2 = cpu_to_le32(tp->tx_ring_dma + sizeof(struct tulip_tx_desc) * (i + 1)); - } - tp->tx_ring[i-1].buffer2 = cpu_to_le32(tp->tx_ring_dma); -} - -static netdev_tx_t -tulip_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - int entry; - u32 flag; - dma_addr_t mapping; - unsigned long flags; - - spin_lock_irqsave(&tp->lock, flags); - - /* Calculate the next Tx descriptor entry. */ - entry = tp->cur_tx % TX_RING_SIZE; - - tp->tx_buffers[entry].skb = skb; - mapping = pci_map_single(tp->pdev, skb->data, - skb->len, PCI_DMA_TODEVICE); - tp->tx_buffers[entry].mapping = mapping; - tp->tx_ring[entry].buffer1 = cpu_to_le32(mapping); - - if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */ - flag = 0x60000000; /* No interrupt */ - } else if (tp->cur_tx - tp->dirty_tx == TX_RING_SIZE/2) { - flag = 0xe0000000; /* Tx-done intr. */ - } else if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE - 2) { - flag = 0x60000000; /* No Tx-done intr. */ - } else { /* Leave room for set_rx_mode() to fill entries. */ - flag = 0xe0000000; /* Tx-done intr. */ - netif_stop_queue(dev); - } - if (entry == TX_RING_SIZE-1) - flag = 0xe0000000 | DESC_RING_WRAP; - - tp->tx_ring[entry].length = cpu_to_le32(skb->len | flag); - /* if we were using Transmit Automatic Polling, we would need a - * wmb() here. */ - tp->tx_ring[entry].status = cpu_to_le32(DescOwned); - wmb(); - - tp->cur_tx++; - - /* Trigger an immediate transmit demand. */ - iowrite32(0, tp->base_addr + CSR1); - - spin_unlock_irqrestore(&tp->lock, flags); - - return NETDEV_TX_OK; -} - -static void tulip_clean_tx_ring(struct tulip_private *tp) -{ - unsigned int dirty_tx; - - for (dirty_tx = tp->dirty_tx ; tp->cur_tx - dirty_tx > 0; - dirty_tx++) { - int entry = dirty_tx % TX_RING_SIZE; - int status = le32_to_cpu(tp->tx_ring[entry].status); - - if (status < 0) { - tp->dev->stats.tx_errors++; /* It wasn't Txed */ - tp->tx_ring[entry].status = 0; - } - - /* Check for Tx filter setup frames. */ - if (tp->tx_buffers[entry].skb == NULL) { - /* test because dummy frames not mapped */ - if (tp->tx_buffers[entry].mapping) - pci_unmap_single(tp->pdev, - tp->tx_buffers[entry].mapping, - sizeof(tp->setup_frame), - PCI_DMA_TODEVICE); - continue; - } - - pci_unmap_single(tp->pdev, tp->tx_buffers[entry].mapping, - tp->tx_buffers[entry].skb->len, - PCI_DMA_TODEVICE); - - /* Free the original skb. */ - dev_kfree_skb_irq(tp->tx_buffers[entry].skb); - tp->tx_buffers[entry].skb = NULL; - tp->tx_buffers[entry].mapping = 0; - } -} - -static void tulip_down (struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - unsigned long flags; - - cancel_work_sync(&tp->media_work); - -#ifdef CONFIG_TULIP_NAPI - napi_disable(&tp->napi); -#endif - - del_timer_sync (&tp->timer); -#ifdef CONFIG_TULIP_NAPI - del_timer_sync (&tp->oom_timer); -#endif - spin_lock_irqsave (&tp->lock, flags); - - /* Disable interrupts by clearing the interrupt mask. */ - iowrite32 (0x00000000, ioaddr + CSR7); - - /* Stop the Tx and Rx processes. */ - tulip_stop_rxtx(tp); - - /* prepare receive buffers */ - tulip_refill_rx(dev); - - /* release any unconsumed transmit buffers */ - tulip_clean_tx_ring(tp); - - if (ioread32(ioaddr + CSR6) != 0xffffffff) - dev->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff; - - spin_unlock_irqrestore (&tp->lock, flags); - - init_timer(&tp->timer); - tp->timer.data = (unsigned long)dev; - tp->timer.function = tulip_tbl[tp->chip_id].media_timer; - - dev->if_port = tp->saved_if_port; - - /* Leave the driver in snooze, not sleep, mode. */ - tulip_set_power_state (tp, 0, 1); -} - -static void tulip_free_ring (struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - int i; - - /* Free all the skbuffs in the Rx queue. */ - for (i = 0; i < RX_RING_SIZE; i++) { - struct sk_buff *skb = tp->rx_buffers[i].skb; - dma_addr_t mapping = tp->rx_buffers[i].mapping; - - tp->rx_buffers[i].skb = NULL; - tp->rx_buffers[i].mapping = 0; - - tp->rx_ring[i].status = 0; /* Not owned by Tulip chip. */ - tp->rx_ring[i].length = 0; - /* An invalid address. */ - tp->rx_ring[i].buffer1 = cpu_to_le32(0xBADF00D0); - if (skb) { - pci_unmap_single(tp->pdev, mapping, PKT_BUF_SZ, - PCI_DMA_FROMDEVICE); - dev_kfree_skb (skb); - } - } - - for (i = 0; i < TX_RING_SIZE; i++) { - struct sk_buff *skb = tp->tx_buffers[i].skb; - - if (skb != NULL) { - pci_unmap_single(tp->pdev, tp->tx_buffers[i].mapping, - skb->len, PCI_DMA_TODEVICE); - dev_kfree_skb (skb); - } - tp->tx_buffers[i].skb = NULL; - tp->tx_buffers[i].mapping = 0; - } -} - -static int tulip_close (struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - - netif_stop_queue (dev); - - tulip_down (dev); - - if (tulip_debug > 1) - dev_printk(KERN_DEBUG, &dev->dev, - "Shutting down ethercard, status was %02x\n", - ioread32 (ioaddr + CSR5)); - - free_irq (dev->irq, dev); - - tulip_free_ring (dev); - - return 0; -} - -static struct net_device_stats *tulip_get_stats(struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - - if (netif_running(dev)) { - unsigned long flags; - - spin_lock_irqsave (&tp->lock, flags); - - dev->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff; - - spin_unlock_irqrestore(&tp->lock, flags); - } - - return &dev->stats; -} - - -static void tulip_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - struct tulip_private *np = netdev_priv(dev); - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, pci_name(np->pdev)); -} - - -static int tulip_ethtool_set_wol(struct net_device *dev, - struct ethtool_wolinfo *wolinfo) -{ - struct tulip_private *tp = netdev_priv(dev); - - if (wolinfo->wolopts & (~tp->wolinfo.supported)) - return -EOPNOTSUPP; - - tp->wolinfo.wolopts = wolinfo->wolopts; - device_set_wakeup_enable(&tp->pdev->dev, tp->wolinfo.wolopts); - return 0; -} - -static void tulip_ethtool_get_wol(struct net_device *dev, - struct ethtool_wolinfo *wolinfo) -{ - struct tulip_private *tp = netdev_priv(dev); - - wolinfo->supported = tp->wolinfo.supported; - wolinfo->wolopts = tp->wolinfo.wolopts; - return; -} - - -static const struct ethtool_ops ops = { - .get_drvinfo = tulip_get_drvinfo, - .set_wol = tulip_ethtool_set_wol, - .get_wol = tulip_ethtool_get_wol, -}; - -/* Provide ioctl() calls to examine the MII xcvr state. */ -static int private_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - struct mii_ioctl_data *data = if_mii(rq); - const unsigned int phy_idx = 0; - int phy = tp->phys[phy_idx] & 0x1f; - unsigned int regnum = data->reg_num; - - switch (cmd) { - case SIOCGMIIPHY: /* Get address of MII PHY in use. */ - if (tp->mii_cnt) - data->phy_id = phy; - else if (tp->flags & HAS_NWAY) - data->phy_id = 32; - else if (tp->chip_id == COMET) - data->phy_id = 1; - else - return -ENODEV; - - case SIOCGMIIREG: /* Read MII PHY register. */ - if (data->phy_id == 32 && (tp->flags & HAS_NWAY)) { - int csr12 = ioread32 (ioaddr + CSR12); - int csr14 = ioread32 (ioaddr + CSR14); - switch (regnum) { - case 0: - if (((csr14<<5) & 0x1000) || - (dev->if_port == 5 && tp->nwayset)) - data->val_out = 0x1000; - else - data->val_out = (tulip_media_cap[dev->if_port]&MediaIs100 ? 0x2000 : 0) - | (tulip_media_cap[dev->if_port]&MediaIsFD ? 0x0100 : 0); - break; - case 1: - data->val_out = - 0x1848 + - ((csr12&0x7000) == 0x5000 ? 0x20 : 0) + - ((csr12&0x06) == 6 ? 0 : 4); - data->val_out |= 0x6048; - break; - case 4: - /* Advertised value, bogus 10baseTx-FD value from CSR6. */ - data->val_out = - ((ioread32(ioaddr + CSR6) >> 3) & 0x0040) + - ((csr14 >> 1) & 0x20) + 1; - data->val_out |= ((csr14 >> 9) & 0x03C0); - break; - case 5: data->val_out = tp->lpar; break; - default: data->val_out = 0; break; - } - } else { - data->val_out = tulip_mdio_read (dev, data->phy_id & 0x1f, regnum); - } - return 0; - - case SIOCSMIIREG: /* Write MII PHY register. */ - if (regnum & ~0x1f) - return -EINVAL; - if (data->phy_id == phy) { - u16 value = data->val_in; - switch (regnum) { - case 0: /* Check for autonegotiation on or reset. */ - tp->full_duplex_lock = (value & 0x9000) ? 0 : 1; - if (tp->full_duplex_lock) - tp->full_duplex = (value & 0x0100) ? 1 : 0; - break; - case 4: - tp->advertising[phy_idx] = - tp->mii_advertise = data->val_in; - break; - } - } - if (data->phy_id == 32 && (tp->flags & HAS_NWAY)) { - u16 value = data->val_in; - if (regnum == 0) { - if ((value & 0x1200) == 0x1200) { - if (tp->chip_id == PNIC2) { - pnic2_start_nway (dev); - } else { - t21142_start_nway (dev); - } - } - } else if (regnum == 4) - tp->sym_advertise = value; - } else { - tulip_mdio_write (dev, data->phy_id & 0x1f, regnum, data->val_in); - } - return 0; - default: - return -EOPNOTSUPP; - } - - return -EOPNOTSUPP; -} - - -/* Set or clear the multicast filter for this adaptor. - Note that we only use exclusion around actually queueing the - new frame, not around filling tp->setup_frame. This is non-deterministic - when re-entered but still correct. */ - -#undef set_bit_le -#define set_bit_le(i,p) do { ((char *)(p))[(i)/8] |= (1<<((i)%8)); } while(0) - -static void build_setup_frame_hash(u16 *setup_frm, struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - u16 hash_table[32]; - struct netdev_hw_addr *ha; - int i; - u16 *eaddrs; - - memset(hash_table, 0, sizeof(hash_table)); - set_bit_le(255, hash_table); /* Broadcast entry */ - /* This should work on big-endian machines as well. */ - netdev_for_each_mc_addr(ha, dev) { - int index = ether_crc_le(ETH_ALEN, ha->addr) & 0x1ff; - - set_bit_le(index, hash_table); - } - for (i = 0; i < 32; i++) { - *setup_frm++ = hash_table[i]; - *setup_frm++ = hash_table[i]; - } - setup_frm = &tp->setup_frame[13*6]; - - /* Fill the final entry with our physical address. */ - eaddrs = (u16 *)dev->dev_addr; - *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0]; - *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1]; - *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2]; -} - -static void build_setup_frame_perfect(u16 *setup_frm, struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - struct netdev_hw_addr *ha; - u16 *eaddrs; - - /* We have <= 14 addresses so we can use the wonderful - 16 address perfect filtering of the Tulip. */ - netdev_for_each_mc_addr(ha, dev) { - eaddrs = (u16 *) ha->addr; - *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++; - *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++; - *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++; - } - /* Fill the unused entries with the broadcast address. */ - memset(setup_frm, 0xff, (15 - netdev_mc_count(dev)) * 12); - setup_frm = &tp->setup_frame[15*6]; - - /* Fill the final entry with our physical address. */ - eaddrs = (u16 *)dev->dev_addr; - *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0]; - *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1]; - *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2]; -} - - -static void set_rx_mode(struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - int csr6; - - csr6 = ioread32(ioaddr + CSR6) & ~0x00D5; - - tp->csr6 &= ~0x00D5; - if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ - tp->csr6 |= AcceptAllMulticast | AcceptAllPhys; - csr6 |= AcceptAllMulticast | AcceptAllPhys; - } else if ((netdev_mc_count(dev) > 1000) || - (dev->flags & IFF_ALLMULTI)) { - /* Too many to filter well -- accept all multicasts. */ - tp->csr6 |= AcceptAllMulticast; - csr6 |= AcceptAllMulticast; - } else if (tp->flags & MC_HASH_ONLY) { - /* Some work-alikes have only a 64-entry hash filter table. */ - /* Should verify correctness on big-endian/__powerpc__ */ - struct netdev_hw_addr *ha; - if (netdev_mc_count(dev) > 64) { - /* Arbitrary non-effective limit. */ - tp->csr6 |= AcceptAllMulticast; - csr6 |= AcceptAllMulticast; - } else { - u32 mc_filter[2] = {0, 0}; /* Multicast hash filter */ - int filterbit; - netdev_for_each_mc_addr(ha, dev) { - if (tp->flags & COMET_MAC_ADDR) - filterbit = ether_crc_le(ETH_ALEN, - ha->addr); - else - filterbit = ether_crc(ETH_ALEN, - ha->addr) >> 26; - filterbit &= 0x3f; - mc_filter[filterbit >> 5] |= 1 << (filterbit & 31); - if (tulip_debug > 2) - dev_info(&dev->dev, - "Added filter for %pM %08x bit %d\n", - ha->addr, - ether_crc(ETH_ALEN, ha->addr), - filterbit); - } - if (mc_filter[0] == tp->mc_filter[0] && - mc_filter[1] == tp->mc_filter[1]) - ; /* No change. */ - else if (tp->flags & IS_ASIX) { - iowrite32(2, ioaddr + CSR13); - iowrite32(mc_filter[0], ioaddr + CSR14); - iowrite32(3, ioaddr + CSR13); - iowrite32(mc_filter[1], ioaddr + CSR14); - } else if (tp->flags & COMET_MAC_ADDR) { - iowrite32(mc_filter[0], ioaddr + CSR27); - iowrite32(mc_filter[1], ioaddr + CSR28); - } - tp->mc_filter[0] = mc_filter[0]; - tp->mc_filter[1] = mc_filter[1]; - } - } else { - unsigned long flags; - u32 tx_flags = 0x08000000 | 192; - - /* Note that only the low-address shortword of setup_frame is valid! - The values are doubled for big-endian architectures. */ - if (netdev_mc_count(dev) > 14) { - /* Must use a multicast hash table. */ - build_setup_frame_hash(tp->setup_frame, dev); - tx_flags = 0x08400000 | 192; - } else { - build_setup_frame_perfect(tp->setup_frame, dev); - } - - spin_lock_irqsave(&tp->lock, flags); - - if (tp->cur_tx - tp->dirty_tx > TX_RING_SIZE - 2) { - /* Same setup recently queued, we need not add it. */ - } else { - unsigned int entry; - int dummy = -1; - - /* Now add this frame to the Tx list. */ - - entry = tp->cur_tx++ % TX_RING_SIZE; - - if (entry != 0) { - /* Avoid a chip errata by prefixing a dummy entry. */ - tp->tx_buffers[entry].skb = NULL; - tp->tx_buffers[entry].mapping = 0; - tp->tx_ring[entry].length = - (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0; - tp->tx_ring[entry].buffer1 = 0; - /* Must set DescOwned later to avoid race with chip */ - dummy = entry; - entry = tp->cur_tx++ % TX_RING_SIZE; - - } - - tp->tx_buffers[entry].skb = NULL; - tp->tx_buffers[entry].mapping = - pci_map_single(tp->pdev, tp->setup_frame, - sizeof(tp->setup_frame), - PCI_DMA_TODEVICE); - /* Put the setup frame on the Tx list. */ - if (entry == TX_RING_SIZE-1) - tx_flags |= DESC_RING_WRAP; /* Wrap ring. */ - tp->tx_ring[entry].length = cpu_to_le32(tx_flags); - tp->tx_ring[entry].buffer1 = - cpu_to_le32(tp->tx_buffers[entry].mapping); - tp->tx_ring[entry].status = cpu_to_le32(DescOwned); - if (dummy >= 0) - tp->tx_ring[dummy].status = cpu_to_le32(DescOwned); - if (tp->cur_tx - tp->dirty_tx >= TX_RING_SIZE - 2) - netif_stop_queue(dev); - - /* Trigger an immediate transmit demand. */ - iowrite32(0, ioaddr + CSR1); - } - - spin_unlock_irqrestore(&tp->lock, flags); - } - - iowrite32(csr6, ioaddr + CSR6); -} - -#ifdef CONFIG_TULIP_MWI -static void __devinit tulip_mwi_config (struct pci_dev *pdev, - struct net_device *dev) -{ - struct tulip_private *tp = netdev_priv(dev); - u8 cache; - u16 pci_command; - u32 csr0; - - if (tulip_debug > 3) - printk(KERN_DEBUG "%s: tulip_mwi_config()\n", pci_name(pdev)); - - tp->csr0 = csr0 = 0; - - /* if we have any cache line size at all, we can do MRM and MWI */ - csr0 |= MRM | MWI; - - /* Enable MWI in the standard PCI command bit. - * Check for the case where MWI is desired but not available - */ - pci_try_set_mwi(pdev); - - /* read result from hardware (in case bit refused to enable) */ - pci_read_config_word(pdev, PCI_COMMAND, &pci_command); - if ((csr0 & MWI) && (!(pci_command & PCI_COMMAND_INVALIDATE))) - csr0 &= ~MWI; - - /* if cache line size hardwired to zero, no MWI */ - pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache); - if ((csr0 & MWI) && (cache == 0)) { - csr0 &= ~MWI; - pci_clear_mwi(pdev); - } - - /* assign per-cacheline-size cache alignment and - * burst length values - */ - switch (cache) { - case 8: - csr0 |= MRL | (1 << CALShift) | (16 << BurstLenShift); - break; - case 16: - csr0 |= MRL | (2 << CALShift) | (16 << BurstLenShift); - break; - case 32: - csr0 |= MRL | (3 << CALShift) | (32 << BurstLenShift); - break; - default: - cache = 0; - break; - } - - /* if we have a good cache line size, we by now have a good - * csr0, so save it and exit - */ - if (cache) - goto out; - - /* we don't have a good csr0 or cache line size, disable MWI */ - if (csr0 & MWI) { - pci_clear_mwi(pdev); - csr0 &= ~MWI; - } - - /* sane defaults for burst length and cache alignment - * originally from de4x5 driver - */ - csr0 |= (8 << BurstLenShift) | (1 << CALShift); - -out: - tp->csr0 = csr0; - if (tulip_debug > 2) - printk(KERN_DEBUG "%s: MWI config cacheline=%d, csr0=%08x\n", - pci_name(pdev), cache, csr0); -} -#endif - -/* - * Chips that have the MRM/reserved bit quirk and the burst quirk. That - * is the DM910X and the on chip ULi devices - */ - -static int tulip_uli_dm_quirk(struct pci_dev *pdev) -{ - if (pdev->vendor == 0x1282 && pdev->device == 0x9102) - return 1; - return 0; -} - -static const struct net_device_ops tulip_netdev_ops = { - .ndo_open = tulip_open, - .ndo_start_xmit = tulip_start_xmit, - .ndo_tx_timeout = tulip_tx_timeout, - .ndo_stop = tulip_close, - .ndo_get_stats = tulip_get_stats, - .ndo_do_ioctl = private_ioctl, - .ndo_set_multicast_list = set_rx_mode, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = poll_tulip, -#endif -}; - -static int __devinit tulip_init_one (struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct tulip_private *tp; - /* See note below on the multiport cards. */ - static unsigned char last_phys_addr[6] = {0x00, 'L', 'i', 'n', 'u', 'x'}; - static struct pci_device_id early_486_chipsets[] = { - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82424) }, - { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496) }, - { }, - }; - static int last_irq; - static int multiport_cnt; /* For four-port boards w/one EEPROM */ - int i, irq; - unsigned short sum; - unsigned char *ee_data; - struct net_device *dev; - void __iomem *ioaddr; - static int board_idx = -1; - int chip_idx = ent->driver_data; - const char *chip_name = tulip_tbl[chip_idx].chip_name; - unsigned int eeprom_missing = 0; - unsigned int force_csr0 = 0; - -#ifndef MODULE - if (tulip_debug > 0) - printk_once(KERN_INFO "%s", version); -#endif - - board_idx++; - - /* - * Lan media wire a tulip chip to a wan interface. Needs a very - * different driver (lmc driver) - */ - - if (pdev->subsystem_vendor == PCI_VENDOR_ID_LMC) { - pr_err(PFX "skipping LMC card\n"); - return -ENODEV; - } else if (pdev->subsystem_vendor == PCI_VENDOR_ID_SBE && - (pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_T3E3 || - pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_2T3E3_P0 || - pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_2T3E3_P1)) { - pr_err(PFX "skipping SBE T3E3 port\n"); - return -ENODEV; - } - - /* - * DM910x chips should be handled by the dmfe driver, except - * on-board chips on SPARC systems. Also, early DM9100s need - * software CRC which only the dmfe driver supports. - */ - -#ifdef CONFIG_TULIP_DM910X - if (chip_idx == DM910X) { - struct device_node *dp; - - if (pdev->vendor == 0x1282 && pdev->device == 0x9100 && - pdev->revision < 0x30) { - pr_info(PFX "skipping early DM9100 with Crc bug (use dmfe)\n"); - return -ENODEV; - } - - dp = pci_device_to_OF_node(pdev); - if (!(dp && of_get_property(dp, "local-mac-address", NULL))) { - pr_info(PFX "skipping DM910x expansion card (use dmfe)\n"); - return -ENODEV; - } - } -#endif - - /* - * Looks for early PCI chipsets where people report hangs - * without the workarounds being on. - */ - - /* 1. Intel Saturn. Switch to 8 long words burst, 8 long word cache - aligned. Aries might need this too. The Saturn errata are not - pretty reading but thankfully it's an old 486 chipset. - - 2. The dreaded SiS496 486 chipset. Same workaround as Intel - Saturn. - */ - - if (pci_dev_present(early_486_chipsets)) { - csr0 = MRL | MRM | (8 << BurstLenShift) | (1 << CALShift); - force_csr0 = 1; - } - - /* bugfix: the ASIX must have a burst limit or horrible things happen. */ - if (chip_idx == AX88140) { - if ((csr0 & 0x3f00) == 0) - csr0 |= 0x2000; - } - - /* PNIC doesn't have MWI/MRL/MRM... */ - if (chip_idx == LC82C168) - csr0 &= ~0xfff10000; /* zero reserved bits 31:20, 16 */ - - /* DM9102A has troubles with MRM & clear reserved bits 24:22, 20, 16, 7:1 */ - if (tulip_uli_dm_quirk(pdev)) { - csr0 &= ~0x01f100ff; -#if defined(CONFIG_SPARC) - csr0 = (csr0 & ~0xff00) | 0xe000; -#endif - } - /* - * And back to business - */ - - i = pci_enable_device(pdev); - if (i) { - pr_err(PFX "Cannot enable tulip board #%d, aborting\n", - board_idx); - return i; - } - - /* The chip will fail to enter a low-power state later unless - * first explicitly commanded into D0 */ - if (pci_set_power_state(pdev, PCI_D0)) { - printk (KERN_NOTICE PFX - "Failed to set power state to D0\n"); - } - - irq = pdev->irq; - - /* alloc_etherdev ensures aligned and zeroed private structures */ - dev = alloc_etherdev (sizeof (*tp)); - if (!dev) { - pr_err(PFX "ether device alloc failed, aborting\n"); - return -ENOMEM; - } - - SET_NETDEV_DEV(dev, &pdev->dev); - if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) { - pr_err(PFX "%s: I/O region (0x%llx@0x%llx) too small, aborting\n", - pci_name(pdev), - (unsigned long long)pci_resource_len (pdev, 0), - (unsigned long long)pci_resource_start (pdev, 0)); - goto err_out_free_netdev; - } - - /* grab all resources from both PIO and MMIO regions, as we - * don't want anyone else messing around with our hardware */ - if (pci_request_regions (pdev, DRV_NAME)) - goto err_out_free_netdev; - - ioaddr = pci_iomap(pdev, TULIP_BAR, tulip_tbl[chip_idx].io_size); - - if (!ioaddr) - goto err_out_free_res; - - /* - * initialize private data structure 'tp' - * it is zeroed and aligned in alloc_etherdev - */ - tp = netdev_priv(dev); - tp->dev = dev; - - tp->rx_ring = pci_alloc_consistent(pdev, - sizeof(struct tulip_rx_desc) * RX_RING_SIZE + - sizeof(struct tulip_tx_desc) * TX_RING_SIZE, - &tp->rx_ring_dma); - if (!tp->rx_ring) - goto err_out_mtable; - tp->tx_ring = (struct tulip_tx_desc *)(tp->rx_ring + RX_RING_SIZE); - tp->tx_ring_dma = tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * RX_RING_SIZE; - - tp->chip_id = chip_idx; - tp->flags = tulip_tbl[chip_idx].flags; - - tp->wolinfo.supported = 0; - tp->wolinfo.wolopts = 0; - /* COMET: Enable power management only for AN983B */ - if (chip_idx == COMET ) { - u32 sig; - pci_read_config_dword (pdev, 0x80, &sig); - if (sig == 0x09811317) { - tp->flags |= COMET_PM; - tp->wolinfo.supported = WAKE_PHY | WAKE_MAGIC; - printk(KERN_INFO "tulip_init_one: Enabled WOL support for AN983B\n"); - } - } - tp->pdev = pdev; - tp->base_addr = ioaddr; - tp->revision = pdev->revision; - tp->csr0 = csr0; - spin_lock_init(&tp->lock); - spin_lock_init(&tp->mii_lock); - init_timer(&tp->timer); - tp->timer.data = (unsigned long)dev; - tp->timer.function = tulip_tbl[tp->chip_id].media_timer; - - INIT_WORK(&tp->media_work, tulip_tbl[tp->chip_id].media_task); - - dev->base_addr = (unsigned long)ioaddr; - -#ifdef CONFIG_TULIP_MWI - if (!force_csr0 && (tp->flags & HAS_PCI_MWI)) - tulip_mwi_config (pdev, dev); -#endif - - /* Stop the chip's Tx and Rx processes. */ - tulip_stop_rxtx(tp); - - pci_set_master(pdev); - -#ifdef CONFIG_GSC - if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP) { - switch (pdev->subsystem_device) { - default: - break; - case 0x1061: - case 0x1062: - case 0x1063: - case 0x1098: - case 0x1099: - case 0x10EE: - tp->flags |= HAS_SWAPPED_SEEPROM | NEEDS_FAKE_MEDIA_TABLE; - chip_name = "GSC DS21140 Tulip"; - } - } -#endif - - /* Clear the missed-packet counter. */ - ioread32(ioaddr + CSR8); - - /* The station address ROM is read byte serially. The register must - be polled, waiting for the value to be read bit serially from the - EEPROM. - */ - ee_data = tp->eeprom; - memset(ee_data, 0, sizeof(tp->eeprom)); - sum = 0; - if (chip_idx == LC82C168) { - for (i = 0; i < 3; i++) { - int value, boguscnt = 100000; - iowrite32(0x600 | i, ioaddr + 0x98); - do { - value = ioread32(ioaddr + CSR9); - } while (value < 0 && --boguscnt > 0); - put_unaligned_le16(value, ((__le16 *)dev->dev_addr) + i); - sum += value & 0xffff; - } - } else if (chip_idx == COMET) { - /* No need to read the EEPROM. */ - put_unaligned_le32(ioread32(ioaddr + 0xA4), dev->dev_addr); - put_unaligned_le16(ioread32(ioaddr + 0xA8), dev->dev_addr + 4); - for (i = 0; i < 6; i ++) - sum += dev->dev_addr[i]; - } else { - /* A serial EEPROM interface, we read now and sort it out later. */ - int sa_offset = 0; - int ee_addr_size = tulip_read_eeprom(dev, 0xff, 8) & 0x40000 ? 8 : 6; - int ee_max_addr = ((1 << ee_addr_size) - 1) * sizeof(u16); - - if (ee_max_addr > sizeof(tp->eeprom)) - ee_max_addr = sizeof(tp->eeprom); - - for (i = 0; i < ee_max_addr ; i += sizeof(u16)) { - u16 data = tulip_read_eeprom(dev, i/2, ee_addr_size); - ee_data[i] = data & 0xff; - ee_data[i + 1] = data >> 8; - } - - /* DEC now has a specification (see Notes) but early board makers - just put the address in the first EEPROM locations. */ - /* This does memcmp(ee_data, ee_data+16, 8) */ - for (i = 0; i < 8; i ++) - if (ee_data[i] != ee_data[16+i]) - sa_offset = 20; - if (chip_idx == CONEXANT) { - /* Check that the tuple type and length is correct. */ - if (ee_data[0x198] == 0x04 && ee_data[0x199] == 6) - sa_offset = 0x19A; - } else if (ee_data[0] == 0xff && ee_data[1] == 0xff && - ee_data[2] == 0) { - sa_offset = 2; /* Grrr, damn Matrox boards. */ - multiport_cnt = 4; - } -#ifdef CONFIG_MIPS_COBALT - if ((pdev->bus->number == 0) && - ((PCI_SLOT(pdev->devfn) == 7) || - (PCI_SLOT(pdev->devfn) == 12))) { - /* Cobalt MAC address in first EEPROM locations. */ - sa_offset = 0; - /* Ensure our media table fixup get's applied */ - memcpy(ee_data + 16, ee_data, 8); - } -#endif -#ifdef CONFIG_GSC - /* Check to see if we have a broken srom */ - if (ee_data[0] == 0x61 && ee_data[1] == 0x10) { - /* pci_vendor_id and subsystem_id are swapped */ - ee_data[0] = ee_data[2]; - ee_data[1] = ee_data[3]; - ee_data[2] = 0x61; - ee_data[3] = 0x10; - - /* HSC-PCI boards need to be byte-swaped and shifted - * up 1 word. This shift needs to happen at the end - * of the MAC first because of the 2 byte overlap. - */ - for (i = 4; i >= 0; i -= 2) { - ee_data[17 + i + 3] = ee_data[17 + i]; - ee_data[16 + i + 5] = ee_data[16 + i]; - } - } -#endif - - for (i = 0; i < 6; i ++) { - dev->dev_addr[i] = ee_data[i + sa_offset]; - sum += ee_data[i + sa_offset]; - } - } - /* Lite-On boards have the address byte-swapped. */ - if ((dev->dev_addr[0] == 0xA0 || - dev->dev_addr[0] == 0xC0 || - dev->dev_addr[0] == 0x02) && - dev->dev_addr[1] == 0x00) - for (i = 0; i < 6; i+=2) { - char tmp = dev->dev_addr[i]; - dev->dev_addr[i] = dev->dev_addr[i+1]; - dev->dev_addr[i+1] = tmp; - } - /* On the Zynx 315 Etherarray and other multiport boards only the - first Tulip has an EEPROM. - On Sparc systems the mac address is held in the OBP property - "local-mac-address". - The addresses of the subsequent ports are derived from the first. - Many PCI BIOSes also incorrectly report the IRQ line, so we correct - that here as well. */ - if (sum == 0 || sum == 6*0xff) { -#if defined(CONFIG_SPARC) - struct device_node *dp = pci_device_to_OF_node(pdev); - const unsigned char *addr; - int len; -#endif - eeprom_missing = 1; - for (i = 0; i < 5; i++) - dev->dev_addr[i] = last_phys_addr[i]; - dev->dev_addr[i] = last_phys_addr[i] + 1; -#if defined(CONFIG_SPARC) - addr = of_get_property(dp, "local-mac-address", &len); - if (addr && len == 6) - memcpy(dev->dev_addr, addr, 6); -#endif -#if defined(__i386__) || defined(__x86_64__) /* Patch up x86 BIOS bug. */ - if (last_irq) - irq = last_irq; -#endif - } - - for (i = 0; i < 6; i++) - last_phys_addr[i] = dev->dev_addr[i]; - last_irq = irq; - dev->irq = irq; - - /* The lower four bits are the media type. */ - if (board_idx >= 0 && board_idx < MAX_UNITS) { - if (options[board_idx] & MEDIA_MASK) - tp->default_port = options[board_idx] & MEDIA_MASK; - if ((options[board_idx] & FullDuplex) || full_duplex[board_idx] > 0) - tp->full_duplex = 1; - if (mtu[board_idx] > 0) - dev->mtu = mtu[board_idx]; - } - if (dev->mem_start & MEDIA_MASK) - tp->default_port = dev->mem_start & MEDIA_MASK; - if (tp->default_port) { - pr_info(DRV_NAME "%d: Transceiver selection forced to %s\n", - board_idx, medianame[tp->default_port & MEDIA_MASK]); - tp->medialock = 1; - if (tulip_media_cap[tp->default_port] & MediaAlwaysFD) - tp->full_duplex = 1; - } - if (tp->full_duplex) - tp->full_duplex_lock = 1; - - if (tulip_media_cap[tp->default_port] & MediaIsMII) { - u16 media2advert[] = { 0x20, 0x40, 0x03e0, 0x60, 0x80, 0x100, 0x200 }; - tp->mii_advertise = media2advert[tp->default_port - 9]; - tp->mii_advertise |= (tp->flags & HAS_8023X); /* Matching bits! */ - } - - if (tp->flags & HAS_MEDIA_TABLE) { - sprintf(dev->name, DRV_NAME "%d", board_idx); /* hack */ - tulip_parse_eeprom(dev); - strcpy(dev->name, "eth%d"); /* un-hack */ - } - - if ((tp->flags & ALWAYS_CHECK_MII) || - (tp->mtable && tp->mtable->has_mii) || - ( ! tp->mtable && (tp->flags & HAS_MII))) { - if (tp->mtable && tp->mtable->has_mii) { - for (i = 0; i < tp->mtable->leafcount; i++) - if (tp->mtable->mleaf[i].media == 11) { - tp->cur_index = i; - tp->saved_if_port = dev->if_port; - tulip_select_media(dev, 2); - dev->if_port = tp->saved_if_port; - break; - } - } - - /* Find the connected MII xcvrs. - Doing this in open() would allow detecting external xcvrs - later, but takes much time. */ - tulip_find_mii (dev, board_idx); - } - - /* The Tulip-specific entries in the device structure. */ - dev->netdev_ops = &tulip_netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; -#ifdef CONFIG_TULIP_NAPI - netif_napi_add(dev, &tp->napi, tulip_poll, 16); -#endif - SET_ETHTOOL_OPS(dev, &ops); - - if (register_netdev(dev)) - goto err_out_free_ring; - - pci_set_drvdata(pdev, dev); - - dev_info(&dev->dev, -#ifdef CONFIG_TULIP_MMIO - "%s rev %d at MMIO %#llx,%s %pM, IRQ %d\n", -#else - "%s rev %d at Port %#llx,%s %pM, IRQ %d\n", -#endif - chip_name, pdev->revision, - (unsigned long long)pci_resource_start(pdev, TULIP_BAR), - eeprom_missing ? " EEPROM not present," : "", - dev->dev_addr, irq); - - if (tp->chip_id == PNIC2) - tp->link_change = pnic2_lnk_change; - else if (tp->flags & HAS_NWAY) - tp->link_change = t21142_lnk_change; - else if (tp->flags & HAS_PNICNWAY) - tp->link_change = pnic_lnk_change; - - /* Reset the xcvr interface and turn on heartbeat. */ - switch (chip_idx) { - case DC21140: - case DM910X: - default: - if (tp->mtable) - iowrite32(tp->mtable->csr12dir | 0x100, ioaddr + CSR12); - break; - case DC21142: - if (tp->mii_cnt || tulip_media_cap[dev->if_port] & MediaIsMII) { - iowrite32(csr6_mask_defstate, ioaddr + CSR6); - iowrite32(0x0000, ioaddr + CSR13); - iowrite32(0x0000, ioaddr + CSR14); - iowrite32(csr6_mask_hdcap, ioaddr + CSR6); - } else - t21142_start_nway(dev); - break; - case PNIC2: - /* just do a reset for sanity sake */ - iowrite32(0x0000, ioaddr + CSR13); - iowrite32(0x0000, ioaddr + CSR14); - break; - case LC82C168: - if ( ! tp->mii_cnt) { - tp->nway = 1; - tp->nwayset = 0; - iowrite32(csr6_ttm | csr6_ca, ioaddr + CSR6); - iowrite32(0x30, ioaddr + CSR12); - iowrite32(0x0001F078, ioaddr + CSR6); - iowrite32(0x0201F078, ioaddr + CSR6); /* Turn on autonegotiation. */ - } - break; - case MX98713: - case COMPEX9881: - iowrite32(0x00000000, ioaddr + CSR6); - iowrite32(0x000711C0, ioaddr + CSR14); /* Turn on NWay. */ - iowrite32(0x00000001, ioaddr + CSR13); - break; - case MX98715: - case MX98725: - iowrite32(0x01a80000, ioaddr + CSR6); - iowrite32(0xFFFFFFFF, ioaddr + CSR14); - iowrite32(0x00001000, ioaddr + CSR12); - break; - case COMET: - /* No initialization necessary. */ - break; - } - - /* put the chip in snooze mode until opened */ - tulip_set_power_state (tp, 0, 1); - - return 0; - -err_out_free_ring: - pci_free_consistent (pdev, - sizeof (struct tulip_rx_desc) * RX_RING_SIZE + - sizeof (struct tulip_tx_desc) * TX_RING_SIZE, - tp->rx_ring, tp->rx_ring_dma); - -err_out_mtable: - kfree (tp->mtable); - pci_iounmap(pdev, ioaddr); - -err_out_free_res: - pci_release_regions (pdev); - -err_out_free_netdev: - free_netdev (dev); - return -ENODEV; -} - - -/* set the registers according to the given wolopts */ -static void tulip_set_wolopts (struct pci_dev *pdev, u32 wolopts) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - - if (tp->flags & COMET_PM) { - - unsigned int tmp; - - tmp = ioread32(ioaddr + CSR18); - tmp &= ~(comet_csr18_pmes_sticky | comet_csr18_apm_mode | comet_csr18_d3a); - tmp |= comet_csr18_pm_mode; - iowrite32(tmp, ioaddr + CSR18); - - /* Set the Wake-up Control/Status Register to the given WOL options*/ - tmp = ioread32(ioaddr + CSR13); - tmp &= ~(comet_csr13_linkoffe | comet_csr13_linkone | comet_csr13_wfre | comet_csr13_lsce | comet_csr13_mpre); - if (wolopts & WAKE_MAGIC) - tmp |= comet_csr13_mpre; - if (wolopts & WAKE_PHY) - tmp |= comet_csr13_linkoffe | comet_csr13_linkone | comet_csr13_lsce; - /* Clear the event flags */ - tmp |= comet_csr13_wfr | comet_csr13_mpr | comet_csr13_lsc; - iowrite32(tmp, ioaddr + CSR13); - } -} - -#ifdef CONFIG_PM - - -static int tulip_suspend (struct pci_dev *pdev, pm_message_t state) -{ - pci_power_t pstate; - struct net_device *dev = pci_get_drvdata(pdev); - struct tulip_private *tp = netdev_priv(dev); - - if (!dev) - return -EINVAL; - - if (!netif_running(dev)) - goto save_state; - - tulip_down(dev); - - netif_device_detach(dev); - free_irq(dev->irq, dev); - -save_state: - pci_save_state(pdev); - pci_disable_device(pdev); - pstate = pci_choose_state(pdev, state); - if (state.event == PM_EVENT_SUSPEND && pstate != PCI_D0) { - int rc; - - tulip_set_wolopts(pdev, tp->wolinfo.wolopts); - rc = pci_enable_wake(pdev, pstate, tp->wolinfo.wolopts); - if (rc) - printk("tulip: pci_enable_wake failed (%d)\n", rc); - } - pci_set_power_state(pdev, pstate); - - return 0; -} - - -static int tulip_resume(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct tulip_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->base_addr; - int retval; - unsigned int tmp; - - if (!dev) - return -EINVAL; - - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - - if (!netif_running(dev)) - return 0; - - if ((retval = pci_enable_device(pdev))) { - pr_err(PFX "pci_enable_device failed in resume\n"); - return retval; - } - - if ((retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev))) { - pr_err(PFX "request_irq failed in resume\n"); - return retval; - } - - if (tp->flags & COMET_PM) { - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); - - /* Clear the PMES flag */ - tmp = ioread32(ioaddr + CSR20); - tmp |= comet_csr20_pmes; - iowrite32(tmp, ioaddr + CSR20); - - /* Disable all wake-up events */ - tulip_set_wolopts(pdev, 0); - } - netif_device_attach(dev); - - if (netif_running(dev)) - tulip_up(dev); - - return 0; -} - -#endif /* CONFIG_PM */ - - -static void __devexit tulip_remove_one (struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata (pdev); - struct tulip_private *tp; - - if (!dev) - return; - - tp = netdev_priv(dev); - unregister_netdev(dev); - pci_free_consistent (pdev, - sizeof (struct tulip_rx_desc) * RX_RING_SIZE + - sizeof (struct tulip_tx_desc) * TX_RING_SIZE, - tp->rx_ring, tp->rx_ring_dma); - kfree (tp->mtable); - pci_iounmap(pdev, tp->base_addr); - free_netdev (dev); - pci_release_regions (pdev); - pci_set_drvdata (pdev, NULL); - - /* pci_power_off (pdev, -1); */ -} - -#ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling 'interrupt' - used by things like netconsole to send skbs - * without having to re-enable interrupts. It's not called while - * the interrupt routine is executing. - */ - -static void poll_tulip (struct net_device *dev) -{ - /* disable_irq here is not very nice, but with the lockless - interrupt handler we have no other choice. */ - disable_irq(dev->irq); - tulip_interrupt (dev->irq, dev); - enable_irq(dev->irq); -} -#endif - -static struct pci_driver tulip_driver = { - .name = DRV_NAME, - .id_table = tulip_pci_tbl, - .probe = tulip_init_one, - .remove = __devexit_p(tulip_remove_one), -#ifdef CONFIG_PM - .suspend = tulip_suspend, - .resume = tulip_resume, -#endif /* CONFIG_PM */ -}; - - -static int __init tulip_init (void) -{ -#ifdef MODULE - pr_info("%s", version); -#endif - - /* copy module parms into globals */ - tulip_rx_copybreak = rx_copybreak; - tulip_max_interrupt_work = max_interrupt_work; - - /* probe for and init boards */ - return pci_register_driver(&tulip_driver); -} - - -static void __exit tulip_cleanup (void) -{ - pci_unregister_driver (&tulip_driver); -} - - -module_init(tulip_init); -module_exit(tulip_cleanup); diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c deleted file mode 100644 index 74217dbf014..00000000000 --- a/drivers/net/tulip/uli526x.c +++ /dev/null @@ -1,1871 +0,0 @@ -/* - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - as published by the Free Software Foundation; either version 2 - of the License, or (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#define DRV_NAME "uli526x" -#define DRV_VERSION "0.9.3" -#define DRV_RELDATE "2005-7-29" - -#include <linux/module.h> - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/ethtool.h> -#include <linux/skbuff.h> -#include <linux/delay.h> -#include <linux/spinlock.h> -#include <linux/dma-mapping.h> -#include <linux/bitops.h> - -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/dma.h> -#include <asm/uaccess.h> - - -/* Board/System/Debug information/definition ---------------- */ -#define PCI_ULI5261_ID 0x526110B9 /* ULi M5261 ID*/ -#define PCI_ULI5263_ID 0x526310B9 /* ULi M5263 ID*/ - -#define ULI526X_IO_SIZE 0x100 -#define TX_DESC_CNT 0x20 /* Allocated Tx descriptors */ -#define RX_DESC_CNT 0x30 /* Allocated Rx descriptors */ -#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */ -#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */ -#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT) -#define TX_BUF_ALLOC 0x600 -#define RX_ALLOC_SIZE 0x620 -#define ULI526X_RESET 1 -#define CR0_DEFAULT 0 -#define CR6_DEFAULT 0x22200000 -#define CR7_DEFAULT 0x180c1 -#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */ -#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */ -#define MAX_PACKET_SIZE 1514 -#define ULI5261_MAX_MULTICAST 14 -#define RX_COPY_SIZE 100 -#define MAX_CHECK_PACKET 0x8000 - -#define ULI526X_10MHF 0 -#define ULI526X_100MHF 1 -#define ULI526X_10MFD 4 -#define ULI526X_100MFD 5 -#define ULI526X_AUTO 8 - -#define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */ -#define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */ -#define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */ -#define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */ -#define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */ -#define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */ - -#define ULI526X_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */ -#define ULI526X_TX_TIMEOUT ((16*HZ)/2) /* tx packet time-out time 8 s" */ -#define ULI526X_TX_KICK (4*HZ/2) /* tx packet Kick-out time 2 s" */ - -#define ULI526X_DBUG(dbug_now, msg, value) \ -do { \ - if (uli526x_debug || (dbug_now)) \ - pr_err("%s %lx\n", (msg), (long) (value)); \ -} while (0) - -#define SHOW_MEDIA_TYPE(mode) \ - pr_err("Change Speed to %sMhz %s duplex\n", \ - mode & 1 ? "100" : "10", \ - mode & 4 ? "full" : "half"); - - -/* CR9 definition: SROM/MII */ -#define CR9_SROM_READ 0x4800 -#define CR9_SRCS 0x1 -#define CR9_SRCLK 0x2 -#define CR9_CRDOUT 0x8 -#define SROM_DATA_0 0x0 -#define SROM_DATA_1 0x4 -#define PHY_DATA_1 0x20000 -#define PHY_DATA_0 0x00000 -#define MDCLKH 0x10000 - -#define PHY_POWER_DOWN 0x800 - -#define SROM_V41_CODE 0x14 - -#define SROM_CLK_WRITE(data, ioaddr) \ - outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ - udelay(5); \ - outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \ - udelay(5); \ - outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ - udelay(5); - -/* Structure/enum declaration ------------------------------- */ -struct tx_desc { - __le32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */ - char *tx_buf_ptr; /* Data for us */ - struct tx_desc *next_tx_desc; -} __attribute__(( aligned(32) )); - -struct rx_desc { - __le32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */ - struct sk_buff *rx_skb_ptr; /* Data for us */ - struct rx_desc *next_rx_desc; -} __attribute__(( aligned(32) )); - -struct uli526x_board_info { - u32 chip_id; /* Chip vendor/Device ID */ - struct net_device *next_dev; /* next device */ - struct pci_dev *pdev; /* PCI device */ - spinlock_t lock; - - long ioaddr; /* I/O base address */ - u32 cr0_data; - u32 cr5_data; - u32 cr6_data; - u32 cr7_data; - u32 cr15_data; - - /* pointer for memory physical address */ - dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */ - dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */ - dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */ - dma_addr_t first_tx_desc_dma; - dma_addr_t first_rx_desc_dma; - - /* descriptor pointer */ - unsigned char *buf_pool_ptr; /* Tx buffer pool memory */ - unsigned char *buf_pool_start; /* Tx buffer pool align dword */ - unsigned char *desc_pool_ptr; /* descriptor pool memory */ - struct tx_desc *first_tx_desc; - struct tx_desc *tx_insert_ptr; - struct tx_desc *tx_remove_ptr; - struct rx_desc *first_rx_desc; - struct rx_desc *rx_insert_ptr; - struct rx_desc *rx_ready_ptr; /* packet come pointer */ - unsigned long tx_packet_cnt; /* transmitted packet count */ - unsigned long rx_avail_cnt; /* available rx descriptor count */ - unsigned long interval_rx_cnt; /* rx packet count a callback time */ - - u16 dbug_cnt; - u16 NIC_capability; /* NIC media capability */ - u16 PHY_reg4; /* Saved Phyxcer register 4 value */ - - u8 media_mode; /* user specify media mode */ - u8 op_mode; /* real work media mode */ - u8 phy_addr; - u8 link_failed; /* Ever link failed */ - u8 wait_reset; /* Hardware failed, need to reset */ - struct timer_list timer; - - /* Driver defined statistic counter */ - unsigned long tx_fifo_underrun; - unsigned long tx_loss_carrier; - unsigned long tx_no_carrier; - unsigned long tx_late_collision; - unsigned long tx_excessive_collision; - unsigned long tx_jabber_timeout; - unsigned long reset_count; - unsigned long reset_cr8; - unsigned long reset_fatal; - unsigned long reset_TXtimeout; - - /* NIC SROM data */ - unsigned char srom[128]; - u8 init; -}; - -enum uli526x_offsets { - DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20, - DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48, - DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70, - DCR15 = 0x78 -}; - -enum uli526x_CR6_bits { - CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80, - CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000, - CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000 -}; - -/* Global variable declaration ----------------------------- */ -static int __devinitdata printed_version; -static const char version[] __devinitconst = - KERN_INFO DRV_NAME ": ULi M5261/M5263 net driver, version " - DRV_VERSION " (" DRV_RELDATE ")\n"; - -static int uli526x_debug; -static unsigned char uli526x_media_mode = ULI526X_AUTO; -static u32 uli526x_cr6_user_set; - -/* For module input parameter */ -static int debug; -static u32 cr6set; -static int mode = 8; - -/* function declaration ------------------------------------- */ -static int uli526x_open(struct net_device *); -static netdev_tx_t uli526x_start_xmit(struct sk_buff *, - struct net_device *); -static int uli526x_stop(struct net_device *); -static void uli526x_set_filter_mode(struct net_device *); -static const struct ethtool_ops netdev_ethtool_ops; -static u16 read_srom_word(long, int); -static irqreturn_t uli526x_interrupt(int, void *); -#ifdef CONFIG_NET_POLL_CONTROLLER -static void uli526x_poll(struct net_device *dev); -#endif -static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long); -static void allocate_rx_buffer(struct uli526x_board_info *); -static void update_cr6(u32, unsigned long); -static void send_filter_frame(struct net_device *, int); -static u16 phy_read(unsigned long, u8, u8, u32); -static u16 phy_readby_cr10(unsigned long, u8, u8); -static void phy_write(unsigned long, u8, u8, u16, u32); -static void phy_writeby_cr10(unsigned long, u8, u8, u16); -static void phy_write_1bit(unsigned long, u32, u32); -static u16 phy_read_1bit(unsigned long, u32); -static u8 uli526x_sense_speed(struct uli526x_board_info *); -static void uli526x_process_mode(struct uli526x_board_info *); -static void uli526x_timer(unsigned long); -static void uli526x_rx_packet(struct net_device *, struct uli526x_board_info *); -static void uli526x_free_tx_pkt(struct net_device *, struct uli526x_board_info *); -static void uli526x_reuse_skb(struct uli526x_board_info *, struct sk_buff *); -static void uli526x_dynamic_reset(struct net_device *); -static void uli526x_free_rxbuffer(struct uli526x_board_info *); -static void uli526x_init(struct net_device *); -static void uli526x_set_phyxcer(struct uli526x_board_info *); - -/* ULI526X network board routine ---------------------------- */ - -static const struct net_device_ops netdev_ops = { - .ndo_open = uli526x_open, - .ndo_stop = uli526x_stop, - .ndo_start_xmit = uli526x_start_xmit, - .ndo_set_multicast_list = uli526x_set_filter_mode, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = uli526x_poll, -#endif -}; - -/* - * Search ULI526X board, allocate space and register it - */ - -static int __devinit uli526x_init_one (struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct uli526x_board_info *db; /* board information structure */ - struct net_device *dev; - int i, err; - - ULI526X_DBUG(0, "uli526x_init_one()", 0); - - if (!printed_version++) - printk(version); - - /* Init network device */ - dev = alloc_etherdev(sizeof(*db)); - if (dev == NULL) - return -ENOMEM; - SET_NETDEV_DEV(dev, &pdev->dev); - - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { - pr_warning("32-bit PCI DMA not available\n"); - err = -ENODEV; - goto err_out_free; - } - - /* Enable Master/IO access, Disable memory access */ - err = pci_enable_device(pdev); - if (err) - goto err_out_free; - - if (!pci_resource_start(pdev, 0)) { - pr_err("I/O base is zero\n"); - err = -ENODEV; - goto err_out_disable; - } - - if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) { - pr_err("Allocated I/O size too small\n"); - err = -ENODEV; - goto err_out_disable; - } - - if (pci_request_regions(pdev, DRV_NAME)) { - pr_err("Failed to request PCI regions\n"); - err = -ENODEV; - goto err_out_disable; - } - - /* Init system & device */ - db = netdev_priv(dev); - - /* Allocate Tx/Rx descriptor memory */ - db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); - if(db->desc_pool_ptr == NULL) - { - err = -ENOMEM; - goto err_out_nomem; - } - db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); - if(db->buf_pool_ptr == NULL) - { - err = -ENOMEM; - goto err_out_nomem; - } - - db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; - db->first_tx_desc_dma = db->desc_pool_dma_ptr; - db->buf_pool_start = db->buf_pool_ptr; - db->buf_pool_dma_start = db->buf_pool_dma_ptr; - - db->chip_id = ent->driver_data; - db->ioaddr = pci_resource_start(pdev, 0); - - db->pdev = pdev; - db->init = 1; - - dev->base_addr = db->ioaddr; - dev->irq = pdev->irq; - pci_set_drvdata(pdev, dev); - - /* Register some necessary functions */ - dev->netdev_ops = &netdev_ops; - dev->ethtool_ops = &netdev_ethtool_ops; - - spin_lock_init(&db->lock); - - - /* read 64 word srom data */ - for (i = 0; i < 64; i++) - ((__le16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i)); - - /* Set Node address */ - if(((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0) /* SROM absent, so read MAC address from ID Table */ - { - outl(0x10000, db->ioaddr + DCR0); //Diagnosis mode - outl(0x1c0, db->ioaddr + DCR13); //Reset dianostic pointer port - outl(0, db->ioaddr + DCR14); //Clear reset port - outl(0x10, db->ioaddr + DCR14); //Reset ID Table pointer - outl(0, db->ioaddr + DCR14); //Clear reset port - outl(0, db->ioaddr + DCR13); //Clear CR13 - outl(0x1b0, db->ioaddr + DCR13); //Select ID Table access port - //Read MAC address from CR14 - for (i = 0; i < 6; i++) - dev->dev_addr[i] = inl(db->ioaddr + DCR14); - //Read end - outl(0, db->ioaddr + DCR13); //Clear CR13 - outl(0, db->ioaddr + DCR0); //Clear CR0 - udelay(10); - } - else /*Exist SROM*/ - { - for (i = 0; i < 6; i++) - dev->dev_addr[i] = db->srom[20 + i]; - } - err = register_netdev (dev); - if (err) - goto err_out_res; - - dev_info(&dev->dev, "ULi M%04lx at pci%s, %pM, irq %d\n", - ent->driver_data >> 16, pci_name(pdev), - dev->dev_addr, dev->irq); - - pci_set_master(pdev); - - return 0; - -err_out_res: - pci_release_regions(pdev); -err_out_nomem: - if(db->desc_pool_ptr) - pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, - db->desc_pool_ptr, db->desc_pool_dma_ptr); - - if(db->buf_pool_ptr != NULL) - pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, - db->buf_pool_ptr, db->buf_pool_dma_ptr); -err_out_disable: - pci_disable_device(pdev); -err_out_free: - pci_set_drvdata(pdev, NULL); - free_netdev(dev); - - return err; -} - - -static void __devexit uli526x_remove_one (struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct uli526x_board_info *db = netdev_priv(dev); - - ULI526X_DBUG(0, "uli526x_remove_one()", 0); - - pci_free_consistent(db->pdev, sizeof(struct tx_desc) * - DESC_ALL_CNT + 0x20, db->desc_pool_ptr, - db->desc_pool_dma_ptr); - pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, - db->buf_pool_ptr, db->buf_pool_dma_ptr); - unregister_netdev(dev); - pci_release_regions(pdev); - free_netdev(dev); /* free board information */ - pci_set_drvdata(pdev, NULL); - pci_disable_device(pdev); - ULI526X_DBUG(0, "uli526x_remove_one() exit", 0); -} - - -/* - * Open the interface. - * The interface is opened whenever "ifconfig" activates it. - */ - -static int uli526x_open(struct net_device *dev) -{ - int ret; - struct uli526x_board_info *db = netdev_priv(dev); - - ULI526X_DBUG(0, "uli526x_open", 0); - - /* system variable init */ - db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set; - db->tx_packet_cnt = 0; - db->rx_avail_cnt = 0; - db->link_failed = 1; - netif_carrier_off(dev); - db->wait_reset = 0; - - db->NIC_capability = 0xf; /* All capability*/ - db->PHY_reg4 = 0x1e0; - - /* CR6 operation mode decision */ - db->cr6_data |= ULI526X_TXTH_256; - db->cr0_data = CR0_DEFAULT; - - /* Initialize ULI526X board */ - uli526x_init(dev); - - ret = request_irq(dev->irq, uli526x_interrupt, IRQF_SHARED, dev->name, dev); - if (ret) - return ret; - - /* Active System Interface */ - netif_wake_queue(dev); - - /* set and active a timer process */ - init_timer(&db->timer); - db->timer.expires = ULI526X_TIMER_WUT + HZ * 2; - db->timer.data = (unsigned long)dev; - db->timer.function = uli526x_timer; - add_timer(&db->timer); - - return 0; -} - - -/* Initialize ULI526X board - * Reset ULI526X board - * Initialize TX/Rx descriptor chain structure - * Send the set-up frame - * Enable Tx/Rx machine - */ - -static void uli526x_init(struct net_device *dev) -{ - struct uli526x_board_info *db = netdev_priv(dev); - unsigned long ioaddr = db->ioaddr; - u8 phy_tmp; - u8 timeout; - u16 phy_value; - u16 phy_reg_reset; - - - ULI526X_DBUG(0, "uli526x_init()", 0); - - /* Reset M526x MAC controller */ - outl(ULI526X_RESET, ioaddr + DCR0); /* RESET MAC */ - udelay(100); - outl(db->cr0_data, ioaddr + DCR0); - udelay(5); - - /* Phy addr : In some boards,M5261/M5263 phy address != 1 */ - db->phy_addr = 1; - for(phy_tmp=0;phy_tmp<32;phy_tmp++) - { - phy_value=phy_read(db->ioaddr,phy_tmp,3,db->chip_id);//peer add - if(phy_value != 0xffff&&phy_value!=0) - { - db->phy_addr = phy_tmp; - break; - } - } - if(phy_tmp == 32) - pr_warning("Can not find the phy address!!!"); - /* Parser SROM and media mode */ - db->media_mode = uli526x_media_mode; - - /* phyxcer capability setting */ - phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id); - phy_reg_reset = (phy_reg_reset | 0x8000); - phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id); - - /* See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management - * functions") or phy data sheet for details on phy reset - */ - udelay(500); - timeout = 10; - while (timeout-- && - phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id) & 0x8000) - udelay(100); - - /* Process Phyxcer Media Mode */ - uli526x_set_phyxcer(db); - - /* Media Mode Process */ - if ( !(db->media_mode & ULI526X_AUTO) ) - db->op_mode = db->media_mode; /* Force Mode */ - - /* Initialize Transmit/Receive decriptor and CR3/4 */ - uli526x_descriptor_init(db, ioaddr); - - /* Init CR6 to program M526X operation */ - update_cr6(db->cr6_data, ioaddr); - - /* Send setup frame */ - send_filter_frame(dev, netdev_mc_count(dev)); /* M5261/M5263 */ - - /* Init CR7, interrupt active bit */ - db->cr7_data = CR7_DEFAULT; - outl(db->cr7_data, ioaddr + DCR7); - - /* Init CR15, Tx jabber and Rx watchdog timer */ - outl(db->cr15_data, ioaddr + DCR15); - - /* Enable ULI526X Tx/Rx function */ - db->cr6_data |= CR6_RXSC | CR6_TXSC; - update_cr6(db->cr6_data, ioaddr); -} - - -/* - * Hardware start transmission. - * Send a packet to media from the upper layer. - */ - -static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct uli526x_board_info *db = netdev_priv(dev); - struct tx_desc *txptr; - unsigned long flags; - - ULI526X_DBUG(0, "uli526x_start_xmit", 0); - - /* Resource flag check */ - netif_stop_queue(dev); - - /* Too large packet check */ - if (skb->len > MAX_PACKET_SIZE) { - pr_err("big packet = %d\n", (u16)skb->len); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } - - spin_lock_irqsave(&db->lock, flags); - - /* No Tx resource check, it never happen nromally */ - if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) { - spin_unlock_irqrestore(&db->lock, flags); - pr_err("No Tx resource %ld\n", db->tx_packet_cnt); - return NETDEV_TX_BUSY; - } - - /* Disable NIC interrupt */ - outl(0, dev->base_addr + DCR7); - - /* transmit this packet */ - txptr = db->tx_insert_ptr; - skb_copy_from_linear_data(skb, txptr->tx_buf_ptr, skb->len); - txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len); - - /* Point to next transmit free descriptor */ - db->tx_insert_ptr = txptr->next_tx_desc; - - /* Transmit Packet Process */ - if ( (db->tx_packet_cnt < TX_DESC_CNT) ) { - txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ - db->tx_packet_cnt++; /* Ready to send */ - outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ - dev->trans_start = jiffies; /* saved time stamp */ - } - - /* Tx resource check */ - if ( db->tx_packet_cnt < TX_FREE_DESC_CNT ) - netif_wake_queue(dev); - - /* Restore CR7 to enable interrupt */ - spin_unlock_irqrestore(&db->lock, flags); - outl(db->cr7_data, dev->base_addr + DCR7); - - /* free this SKB */ - dev_kfree_skb(skb); - - return NETDEV_TX_OK; -} - - -/* - * Stop the interface. - * The interface is stopped when it is brought. - */ - -static int uli526x_stop(struct net_device *dev) -{ - struct uli526x_board_info *db = netdev_priv(dev); - unsigned long ioaddr = dev->base_addr; - - ULI526X_DBUG(0, "uli526x_stop", 0); - - /* disable system */ - netif_stop_queue(dev); - - /* deleted timer */ - del_timer_sync(&db->timer); - - /* Reset & stop ULI526X board */ - outl(ULI526X_RESET, ioaddr + DCR0); - udelay(5); - phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); - - /* free interrupt */ - free_irq(dev->irq, dev); - - /* free allocated rx buffer */ - uli526x_free_rxbuffer(db); - -#if 0 - /* show statistic counter */ - printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n", - db->tx_fifo_underrun, db->tx_excessive_collision, - db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier, - db->tx_jabber_timeout, db->reset_count, db->reset_cr8, - db->reset_fatal, db->reset_TXtimeout); -#endif - - return 0; -} - - -/* - * M5261/M5263 insterrupt handler - * receive the packet to upper layer, free the transmitted packet - */ - -static irqreturn_t uli526x_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct uli526x_board_info *db = netdev_priv(dev); - unsigned long ioaddr = dev->base_addr; - unsigned long flags; - - spin_lock_irqsave(&db->lock, flags); - outl(0, ioaddr + DCR7); - - /* Got ULI526X status */ - db->cr5_data = inl(ioaddr + DCR5); - outl(db->cr5_data, ioaddr + DCR5); - if ( !(db->cr5_data & 0x180c1) ) { - /* Restore CR7 to enable interrupt mask */ - outl(db->cr7_data, ioaddr + DCR7); - spin_unlock_irqrestore(&db->lock, flags); - return IRQ_HANDLED; - } - - /* Check system status */ - if (db->cr5_data & 0x2000) { - /* system bus error happen */ - ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data); - db->reset_fatal++; - db->wait_reset = 1; /* Need to RESET */ - spin_unlock_irqrestore(&db->lock, flags); - return IRQ_HANDLED; - } - - /* Received the coming packet */ - if ( (db->cr5_data & 0x40) && db->rx_avail_cnt ) - uli526x_rx_packet(dev, db); - - /* reallocate rx descriptor buffer */ - if (db->rx_avail_cnt<RX_DESC_CNT) - allocate_rx_buffer(db); - - /* Free the transmitted descriptor */ - if ( db->cr5_data & 0x01) - uli526x_free_tx_pkt(dev, db); - - /* Restore CR7 to enable interrupt mask */ - outl(db->cr7_data, ioaddr + DCR7); - - spin_unlock_irqrestore(&db->lock, flags); - return IRQ_HANDLED; -} - -#ifdef CONFIG_NET_POLL_CONTROLLER -static void uli526x_poll(struct net_device *dev) -{ - /* ISR grabs the irqsave lock, so this should be safe */ - uli526x_interrupt(dev->irq, dev); -} -#endif - -/* - * Free TX resource after TX complete - */ - -static void uli526x_free_tx_pkt(struct net_device *dev, - struct uli526x_board_info * db) -{ - struct tx_desc *txptr; - u32 tdes0; - - txptr = db->tx_remove_ptr; - while(db->tx_packet_cnt) { - tdes0 = le32_to_cpu(txptr->tdes0); - /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */ - if (tdes0 & 0x80000000) - break; - - /* A packet sent completed */ - db->tx_packet_cnt--; - dev->stats.tx_packets++; - - /* Transmit statistic counter */ - if ( tdes0 != 0x7fffffff ) { - /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */ - dev->stats.collisions += (tdes0 >> 3) & 0xf; - dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff; - if (tdes0 & TDES0_ERR_MASK) { - dev->stats.tx_errors++; - if (tdes0 & 0x0002) { /* UnderRun */ - db->tx_fifo_underrun++; - if ( !(db->cr6_data & CR6_SFT) ) { - db->cr6_data = db->cr6_data | CR6_SFT; - update_cr6(db->cr6_data, db->ioaddr); - } - } - if (tdes0 & 0x0100) - db->tx_excessive_collision++; - if (tdes0 & 0x0200) - db->tx_late_collision++; - if (tdes0 & 0x0400) - db->tx_no_carrier++; - if (tdes0 & 0x0800) - db->tx_loss_carrier++; - if (tdes0 & 0x4000) - db->tx_jabber_timeout++; - } - } - - txptr = txptr->next_tx_desc; - }/* End of while */ - - /* Update TX remove pointer to next */ - db->tx_remove_ptr = txptr; - - /* Resource available check */ - if ( db->tx_packet_cnt < TX_WAKE_DESC_CNT ) - netif_wake_queue(dev); /* Active upper layer, send again */ -} - - -/* - * Receive the come packet and pass to upper layer - */ - -static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info * db) -{ - struct rx_desc *rxptr; - struct sk_buff *skb; - int rxlen; - u32 rdes0; - - rxptr = db->rx_ready_ptr; - - while(db->rx_avail_cnt) { - rdes0 = le32_to_cpu(rxptr->rdes0); - if (rdes0 & 0x80000000) /* packet owner check */ - { - break; - } - - db->rx_avail_cnt--; - db->interval_rx_cnt++; - - pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE); - if ( (rdes0 & 0x300) != 0x300) { - /* A packet without First/Last flag */ - /* reuse this SKB */ - ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0); - uli526x_reuse_skb(db, rxptr->rx_skb_ptr); - } else { - /* A packet with First/Last flag */ - rxlen = ( (rdes0 >> 16) & 0x3fff) - 4; - - /* error summary bit check */ - if (rdes0 & 0x8000) { - /* This is a error packet */ - //printk(DRV_NAME ": rdes0: %lx\n", rdes0); - dev->stats.rx_errors++; - if (rdes0 & 1) - dev->stats.rx_fifo_errors++; - if (rdes0 & 2) - dev->stats.rx_crc_errors++; - if (rdes0 & 0x80) - dev->stats.rx_length_errors++; - } - - if ( !(rdes0 & 0x8000) || - ((db->cr6_data & CR6_PM) && (rxlen>6)) ) { - struct sk_buff *new_skb = NULL; - - skb = rxptr->rx_skb_ptr; - - /* Good packet, send to upper layer */ - /* Shorst packet used new SKB */ - if ((rxlen < RX_COPY_SIZE) && - (((new_skb = dev_alloc_skb(rxlen + 2)) != NULL))) { - skb = new_skb; - /* size less than COPY_SIZE, allocate a rxlen SKB */ - skb_reserve(skb, 2); /* 16byte align */ - memcpy(skb_put(skb, rxlen), - skb_tail_pointer(rxptr->rx_skb_ptr), - rxlen); - uli526x_reuse_skb(db, rxptr->rx_skb_ptr); - } else - skb_put(skb, rxlen); - - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += rxlen; - - } else { - /* Reuse SKB buffer when the packet is error */ - ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0); - uli526x_reuse_skb(db, rxptr->rx_skb_ptr); - } - } - - rxptr = rxptr->next_rx_desc; - } - - db->rx_ready_ptr = rxptr; -} - - -/* - * Set ULI526X multicast address - */ - -static void uli526x_set_filter_mode(struct net_device * dev) -{ - struct uli526x_board_info *db = netdev_priv(dev); - unsigned long flags; - - ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0); - spin_lock_irqsave(&db->lock, flags); - - if (dev->flags & IFF_PROMISC) { - ULI526X_DBUG(0, "Enable PROM Mode", 0); - db->cr6_data |= CR6_PM | CR6_PBF; - update_cr6(db->cr6_data, db->ioaddr); - spin_unlock_irqrestore(&db->lock, flags); - return; - } - - if (dev->flags & IFF_ALLMULTI || - netdev_mc_count(dev) > ULI5261_MAX_MULTICAST) { - ULI526X_DBUG(0, "Pass all multicast address", - netdev_mc_count(dev)); - db->cr6_data &= ~(CR6_PM | CR6_PBF); - db->cr6_data |= CR6_PAM; - spin_unlock_irqrestore(&db->lock, flags); - return; - } - - ULI526X_DBUG(0, "Set multicast address", netdev_mc_count(dev)); - send_filter_frame(dev, netdev_mc_count(dev)); /* M5261/M5263 */ - spin_unlock_irqrestore(&db->lock, flags); -} - -static void -ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd) -{ - ecmd->supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_Autoneg | - SUPPORTED_MII); - - ecmd->advertising = (ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_Autoneg | - ADVERTISED_MII); - - - ecmd->port = PORT_MII; - ecmd->phy_address = db->phy_addr; - - ecmd->transceiver = XCVR_EXTERNAL; - - ecmd->speed = 10; - ecmd->duplex = DUPLEX_HALF; - - if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD) - { - ecmd->speed = 100; - } - if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD) - { - ecmd->duplex = DUPLEX_FULL; - } - if(db->link_failed) - { - ecmd->speed = -1; - ecmd->duplex = -1; - } - - if (db->media_mode & ULI526X_AUTO) - { - ecmd->autoneg = AUTONEG_ENABLE; - } -} - -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - struct uli526x_board_info *np = netdev_priv(dev); - - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - if (np->pdev) - strcpy(info->bus_info, pci_name(np->pdev)); - else - sprintf(info->bus_info, "EISA 0x%lx %d", - dev->base_addr, dev->irq); -} - -static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { - struct uli526x_board_info *np = netdev_priv(dev); - - ULi_ethtool_gset(np, cmd); - - return 0; -} - -static u32 netdev_get_link(struct net_device *dev) { - struct uli526x_board_info *np = netdev_priv(dev); - - if(np->link_failed) - return 0; - else - return 1; -} - -static void uli526x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) -{ - wol->supported = WAKE_PHY | WAKE_MAGIC; - wol->wolopts = 0; -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, - .get_settings = netdev_get_settings, - .get_link = netdev_get_link, - .get_wol = uli526x_get_wol, -}; - -/* - * A periodic timer routine - * Dynamic media sense, allocate Rx buffer... - */ - -static void uli526x_timer(unsigned long data) -{ - u32 tmp_cr8; - unsigned char tmp_cr12=0; - struct net_device *dev = (struct net_device *) data; - struct uli526x_board_info *db = netdev_priv(dev); - unsigned long flags; - u8 TmpSpeed=10; - - //ULI526X_DBUG(0, "uli526x_timer()", 0); - spin_lock_irqsave(&db->lock, flags); - - - /* Dynamic reset ULI526X : system error or transmit time-out */ - tmp_cr8 = inl(db->ioaddr + DCR8); - if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) { - db->reset_cr8++; - db->wait_reset = 1; - } - db->interval_rx_cnt = 0; - - /* TX polling kick monitor */ - if ( db->tx_packet_cnt && - time_after(jiffies, dev_trans_start(dev) + ULI526X_TX_KICK) ) { - outl(0x1, dev->base_addr + DCR1); // Tx polling again - - // TX Timeout - if ( time_after(jiffies, dev_trans_start(dev) + ULI526X_TX_TIMEOUT) ) { - db->reset_TXtimeout++; - db->wait_reset = 1; - printk( "%s: Tx timeout - resetting\n", - dev->name); - } - } - - if (db->wait_reset) { - ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt); - db->reset_count++; - uli526x_dynamic_reset(dev); - db->timer.expires = ULI526X_TIMER_WUT; - add_timer(&db->timer); - spin_unlock_irqrestore(&db->lock, flags); - return; - } - - /* Link status check, Dynamic media type change */ - if((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)!=0) - tmp_cr12 = 3; - - if ( !(tmp_cr12 & 0x3) && !db->link_failed ) { - /* Link Failed */ - ULI526X_DBUG(0, "Link Failed", tmp_cr12); - netif_carrier_off(dev); - pr_info("%s NIC Link is Down\n",dev->name); - db->link_failed = 1; - - /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */ - /* AUTO don't need */ - if ( !(db->media_mode & 0x8) ) - phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id); - - /* AUTO mode, if INT phyxcer link failed, select EXT device */ - if (db->media_mode & ULI526X_AUTO) { - db->cr6_data&=~0x00000200; /* bit9=0, HD mode */ - update_cr6(db->cr6_data, db->ioaddr); - } - } else - if ((tmp_cr12 & 0x3) && db->link_failed) { - ULI526X_DBUG(0, "Link link OK", tmp_cr12); - db->link_failed = 0; - - /* Auto Sense Speed */ - if ( (db->media_mode & ULI526X_AUTO) && - uli526x_sense_speed(db) ) - db->link_failed = 1; - uli526x_process_mode(db); - - if(db->link_failed==0) - { - if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD) - { - TmpSpeed = 100; - } - if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD) - { - pr_info("%s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed); - } - else - { - pr_info("%s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed); - } - netif_carrier_on(dev); - } - /* SHOW_MEDIA_TYPE(db->op_mode); */ - } - else if(!(tmp_cr12 & 0x3) && db->link_failed) - { - if(db->init==1) - { - pr_info("%s NIC Link is Down\n",dev->name); - netif_carrier_off(dev); - } - } - db->init=0; - - /* Timer active again */ - db->timer.expires = ULI526X_TIMER_WUT; - add_timer(&db->timer); - spin_unlock_irqrestore(&db->lock, flags); -} - - -/* - * Stop ULI526X board - * Free Tx/Rx allocated memory - * Init system variable - */ - -static void uli526x_reset_prepare(struct net_device *dev) -{ - struct uli526x_board_info *db = netdev_priv(dev); - - /* Sopt MAC controller */ - db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */ - update_cr6(db->cr6_data, dev->base_addr); - outl(0, dev->base_addr + DCR7); /* Disable Interrupt */ - outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5); - - /* Disable upper layer interface */ - netif_stop_queue(dev); - - /* Free Rx Allocate buffer */ - uli526x_free_rxbuffer(db); - - /* system variable init */ - db->tx_packet_cnt = 0; - db->rx_avail_cnt = 0; - db->link_failed = 1; - db->init=1; - db->wait_reset = 0; -} - - -/* - * Dynamic reset the ULI526X board - * Stop ULI526X board - * Free Tx/Rx allocated memory - * Reset ULI526X board - * Re-initialize ULI526X board - */ - -static void uli526x_dynamic_reset(struct net_device *dev) -{ - ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0); - - uli526x_reset_prepare(dev); - - /* Re-initialize ULI526X board */ - uli526x_init(dev); - - /* Restart upper layer interface */ - netif_wake_queue(dev); -} - - -#ifdef CONFIG_PM - -/* - * Suspend the interface. - */ - -static int uli526x_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct net_device *dev = pci_get_drvdata(pdev); - pci_power_t power_state; - int err; - - ULI526X_DBUG(0, "uli526x_suspend", 0); - - if (!netdev_priv(dev)) - return 0; - - pci_save_state(pdev); - - if (!netif_running(dev)) - return 0; - - netif_device_detach(dev); - uli526x_reset_prepare(dev); - - power_state = pci_choose_state(pdev, state); - pci_enable_wake(pdev, power_state, 0); - err = pci_set_power_state(pdev, power_state); - if (err) { - netif_device_attach(dev); - /* Re-initialize ULI526X board */ - uli526x_init(dev); - /* Restart upper layer interface */ - netif_wake_queue(dev); - } - - return err; -} - -/* - * Resume the interface. - */ - -static int uli526x_resume(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - int err; - - ULI526X_DBUG(0, "uli526x_resume", 0); - - if (!netdev_priv(dev)) - return 0; - - pci_restore_state(pdev); - - if (!netif_running(dev)) - return 0; - - err = pci_set_power_state(pdev, PCI_D0); - if (err) { - dev_warn(&dev->dev, "Could not put device into D0\n"); - return err; - } - - netif_device_attach(dev); - /* Re-initialize ULI526X board */ - uli526x_init(dev); - /* Restart upper layer interface */ - netif_wake_queue(dev); - - return 0; -} - -#else /* !CONFIG_PM */ - -#define uli526x_suspend NULL -#define uli526x_resume NULL - -#endif /* !CONFIG_PM */ - - -/* - * free all allocated rx buffer - */ - -static void uli526x_free_rxbuffer(struct uli526x_board_info * db) -{ - ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0); - - /* free allocated rx buffer */ - while (db->rx_avail_cnt) { - dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr); - db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc; - db->rx_avail_cnt--; - } -} - - -/* - * Reuse the SK buffer - */ - -static void uli526x_reuse_skb(struct uli526x_board_info *db, struct sk_buff * skb) -{ - struct rx_desc *rxptr = db->rx_insert_ptr; - - if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) { - rxptr->rx_skb_ptr = skb; - rxptr->rdes2 = cpu_to_le32(pci_map_single(db->pdev, - skb_tail_pointer(skb), - RX_ALLOC_SIZE, - PCI_DMA_FROMDEVICE)); - wmb(); - rxptr->rdes0 = cpu_to_le32(0x80000000); - db->rx_avail_cnt++; - db->rx_insert_ptr = rxptr->next_rx_desc; - } else - ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt); -} - - -/* - * Initialize transmit/Receive descriptor - * Using Chain structure, and allocate Tx/Rx buffer - */ - -static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long ioaddr) -{ - struct tx_desc *tmp_tx; - struct rx_desc *tmp_rx; - unsigned char *tmp_buf; - dma_addr_t tmp_tx_dma, tmp_rx_dma; - dma_addr_t tmp_buf_dma; - int i; - - ULI526X_DBUG(0, "uli526x_descriptor_init()", 0); - - /* tx descriptor start pointer */ - db->tx_insert_ptr = db->first_tx_desc; - db->tx_remove_ptr = db->first_tx_desc; - outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */ - - /* rx descriptor start pointer */ - db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT; - db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT; - db->rx_insert_ptr = db->first_rx_desc; - db->rx_ready_ptr = db->first_rx_desc; - outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */ - - /* Init Transmit chain */ - tmp_buf = db->buf_pool_start; - tmp_buf_dma = db->buf_pool_dma_start; - tmp_tx_dma = db->first_tx_desc_dma; - for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) { - tmp_tx->tx_buf_ptr = tmp_buf; - tmp_tx->tdes0 = cpu_to_le32(0); - tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */ - tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma); - tmp_tx_dma += sizeof(struct tx_desc); - tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma); - tmp_tx->next_tx_desc = tmp_tx + 1; - tmp_buf = tmp_buf + TX_BUF_ALLOC; - tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC; - } - (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma); - tmp_tx->next_tx_desc = db->first_tx_desc; - - /* Init Receive descriptor chain */ - tmp_rx_dma=db->first_rx_desc_dma; - for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) { - tmp_rx->rdes0 = cpu_to_le32(0); - tmp_rx->rdes1 = cpu_to_le32(0x01000600); - tmp_rx_dma += sizeof(struct rx_desc); - tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma); - tmp_rx->next_rx_desc = tmp_rx + 1; - } - (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma); - tmp_rx->next_rx_desc = db->first_rx_desc; - - /* pre-allocate Rx buffer */ - allocate_rx_buffer(db); -} - - -/* - * Update CR6 value - * Firstly stop ULI526X, then written value and start - */ - -static void update_cr6(u32 cr6_data, unsigned long ioaddr) -{ - - outl(cr6_data, ioaddr + DCR6); - udelay(5); -} - - -/* - * Send a setup frame for M5261/M5263 - * This setup frame initialize ULI526X address filter mode - */ - -#ifdef __BIG_ENDIAN -#define FLT_SHIFT 16 -#else -#define FLT_SHIFT 0 -#endif - -static void send_filter_frame(struct net_device *dev, int mc_cnt) -{ - struct uli526x_board_info *db = netdev_priv(dev); - struct netdev_hw_addr *ha; - struct tx_desc *txptr; - u16 * addrptr; - u32 * suptr; - int i; - - ULI526X_DBUG(0, "send_filter_frame()", 0); - - txptr = db->tx_insert_ptr; - suptr = (u32 *) txptr->tx_buf_ptr; - - /* Node address */ - addrptr = (u16 *) dev->dev_addr; - *suptr++ = addrptr[0] << FLT_SHIFT; - *suptr++ = addrptr[1] << FLT_SHIFT; - *suptr++ = addrptr[2] << FLT_SHIFT; - - /* broadcast address */ - *suptr++ = 0xffff << FLT_SHIFT; - *suptr++ = 0xffff << FLT_SHIFT; - *suptr++ = 0xffff << FLT_SHIFT; - - /* fit the multicast address */ - netdev_for_each_mc_addr(ha, dev) { - addrptr = (u16 *) ha->addr; - *suptr++ = addrptr[0] << FLT_SHIFT; - *suptr++ = addrptr[1] << FLT_SHIFT; - *suptr++ = addrptr[2] << FLT_SHIFT; - } - - for (i = netdev_mc_count(dev); i < 14; i++) { - *suptr++ = 0xffff << FLT_SHIFT; - *suptr++ = 0xffff << FLT_SHIFT; - *suptr++ = 0xffff << FLT_SHIFT; - } - - /* prepare the setup frame */ - db->tx_insert_ptr = txptr->next_tx_desc; - txptr->tdes1 = cpu_to_le32(0x890000c0); - - /* Resource Check and Send the setup packet */ - if (db->tx_packet_cnt < TX_DESC_CNT) { - /* Resource Empty */ - db->tx_packet_cnt++; - txptr->tdes0 = cpu_to_le32(0x80000000); - update_cr6(db->cr6_data | 0x2000, dev->base_addr); - outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ - update_cr6(db->cr6_data, dev->base_addr); - dev->trans_start = jiffies; - } else - pr_err("No Tx resource - Send_filter_frame!\n"); -} - - -/* - * Allocate rx buffer, - * As possible as allocate maxiumn Rx buffer - */ - -static void allocate_rx_buffer(struct uli526x_board_info *db) -{ - struct rx_desc *rxptr; - struct sk_buff *skb; - - rxptr = db->rx_insert_ptr; - - while(db->rx_avail_cnt < RX_DESC_CNT) { - if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL ) - break; - rxptr->rx_skb_ptr = skb; /* FIXME (?) */ - rxptr->rdes2 = cpu_to_le32(pci_map_single(db->pdev, - skb_tail_pointer(skb), - RX_ALLOC_SIZE, - PCI_DMA_FROMDEVICE)); - wmb(); - rxptr->rdes0 = cpu_to_le32(0x80000000); - rxptr = rxptr->next_rx_desc; - db->rx_avail_cnt++; - } - - db->rx_insert_ptr = rxptr; -} - - -/* - * Read one word data from the serial ROM - */ - -static u16 read_srom_word(long ioaddr, int offset) -{ - int i; - u16 srom_data = 0; - long cr9_ioaddr = ioaddr + DCR9; - - outl(CR9_SROM_READ, cr9_ioaddr); - outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); - - /* Send the Read Command 110b */ - SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); - SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); - SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr); - - /* Send the offset */ - for (i = 5; i >= 0; i--) { - srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0; - SROM_CLK_WRITE(srom_data, cr9_ioaddr); - } - - outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); - - for (i = 16; i > 0; i--) { - outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr); - udelay(5); - srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0); - outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); - udelay(5); - } - - outl(CR9_SROM_READ, cr9_ioaddr); - return srom_data; -} - - -/* - * Auto sense the media mode - */ - -static u8 uli526x_sense_speed(struct uli526x_board_info * db) -{ - u8 ErrFlag = 0; - u16 phy_mode; - - phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); - phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); - - if ( (phy_mode & 0x24) == 0x24 ) { - - phy_mode = ((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)<<7); - if(phy_mode&0x8000) - phy_mode = 0x8000; - else if(phy_mode&0x4000) - phy_mode = 0x4000; - else if(phy_mode&0x2000) - phy_mode = 0x2000; - else - phy_mode = 0x1000; - - /* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */ - switch (phy_mode) { - case 0x1000: db->op_mode = ULI526X_10MHF; break; - case 0x2000: db->op_mode = ULI526X_10MFD; break; - case 0x4000: db->op_mode = ULI526X_100MHF; break; - case 0x8000: db->op_mode = ULI526X_100MFD; break; - default: db->op_mode = ULI526X_10MHF; ErrFlag = 1; break; - } - } else { - db->op_mode = ULI526X_10MHF; - ULI526X_DBUG(0, "Link Failed :", phy_mode); - ErrFlag = 1; - } - - return ErrFlag; -} - - -/* - * Set 10/100 phyxcer capability - * AUTO mode : phyxcer register4 is NIC capability - * Force mode: phyxcer register4 is the force media - */ - -static void uli526x_set_phyxcer(struct uli526x_board_info *db) -{ - u16 phy_reg; - - /* Phyxcer capability setting */ - phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0; - - if (db->media_mode & ULI526X_AUTO) { - /* AUTO Mode */ - phy_reg |= db->PHY_reg4; - } else { - /* Force Mode */ - switch(db->media_mode) { - case ULI526X_10MHF: phy_reg |= 0x20; break; - case ULI526X_10MFD: phy_reg |= 0x40; break; - case ULI526X_100MHF: phy_reg |= 0x80; break; - case ULI526X_100MFD: phy_reg |= 0x100; break; - } - - } - - /* Write new capability to Phyxcer Reg4 */ - if ( !(phy_reg & 0x01e0)) { - phy_reg|=db->PHY_reg4; - db->media_mode|=ULI526X_AUTO; - } - phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); - - /* Restart Auto-Negotiation */ - phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); - udelay(50); -} - - -/* - * Process op-mode - AUTO mode : PHY controller in Auto-negotiation Mode - * Force mode: PHY controller in force mode with HUB - * N-way force capability with SWITCH - */ - -static void uli526x_process_mode(struct uli526x_board_info *db) -{ - u16 phy_reg; - - /* Full Duplex Mode Check */ - if (db->op_mode & 0x4) - db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */ - else - db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */ - - update_cr6(db->cr6_data, db->ioaddr); - - /* 10/100M phyxcer force mode need */ - if ( !(db->media_mode & 0x8)) { - /* Forece Mode */ - phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id); - if ( !(phy_reg & 0x1) ) { - /* parter without N-Way capability */ - phy_reg = 0x0; - switch(db->op_mode) { - case ULI526X_10MHF: phy_reg = 0x0; break; - case ULI526X_10MFD: phy_reg = 0x100; break; - case ULI526X_100MHF: phy_reg = 0x2000; break; - case ULI526X_100MFD: phy_reg = 0x2100; break; - } - phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id); - } - } -} - - -/* - * Write a word to Phy register - */ - -static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id) -{ - u16 i; - unsigned long ioaddr; - - if(chip_id == PCI_ULI5263_ID) - { - phy_writeby_cr10(iobase, phy_addr, offset, phy_data); - return; - } - /* M5261/M5263 Chip */ - ioaddr = iobase + DCR9; - - /* Send 33 synchronization clock to Phy controller */ - for (i = 0; i < 35; i++) - phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); - - /* Send start command(01) to Phy */ - phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); - phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); - - /* Send write command(01) to Phy */ - phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); - phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); - - /* Send Phy address */ - for (i = 0x10; i > 0; i = i >> 1) - phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); - - /* Send register address */ - for (i = 0x10; i > 0; i = i >> 1) - phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); - - /* written trasnition */ - phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); - phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); - - /* Write a word data to PHY controller */ - for ( i = 0x8000; i > 0; i >>= 1) - phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); - -} - - -/* - * Read a word data from phy register - */ - -static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id) -{ - int i; - u16 phy_data; - unsigned long ioaddr; - - if(chip_id == PCI_ULI5263_ID) - return phy_readby_cr10(iobase, phy_addr, offset); - /* M5261/M5263 Chip */ - ioaddr = iobase + DCR9; - - /* Send 33 synchronization clock to Phy controller */ - for (i = 0; i < 35; i++) - phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); - - /* Send start command(01) to Phy */ - phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); - phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); - - /* Send read command(10) to Phy */ - phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); - phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); - - /* Send Phy address */ - for (i = 0x10; i > 0; i = i >> 1) - phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); - - /* Send register address */ - for (i = 0x10; i > 0; i = i >> 1) - phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); - - /* Skip transition state */ - phy_read_1bit(ioaddr, chip_id); - - /* read 16bit data */ - for (phy_data = 0, i = 0; i < 16; i++) { - phy_data <<= 1; - phy_data |= phy_read_1bit(ioaddr, chip_id); - } - - return phy_data; -} - -static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset) -{ - unsigned long ioaddr,cr10_value; - - ioaddr = iobase + DCR10; - cr10_value = phy_addr; - cr10_value = (cr10_value<<5) + offset; - cr10_value = (cr10_value<<16) + 0x08000000; - outl(cr10_value,ioaddr); - udelay(1); - while(1) - { - cr10_value = inl(ioaddr); - if(cr10_value&0x10000000) - break; - } - return cr10_value & 0x0ffff; -} - -static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data) -{ - unsigned long ioaddr,cr10_value; - - ioaddr = iobase + DCR10; - cr10_value = phy_addr; - cr10_value = (cr10_value<<5) + offset; - cr10_value = (cr10_value<<16) + 0x04000000 + phy_data; - outl(cr10_value,ioaddr); - udelay(1); -} -/* - * Write one bit data to Phy Controller - */ - -static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id) -{ - outl(phy_data , ioaddr); /* MII Clock Low */ - udelay(1); - outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */ - udelay(1); - outl(phy_data , ioaddr); /* MII Clock Low */ - udelay(1); -} - - -/* - * Read one bit phy data from PHY controller - */ - -static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id) -{ - u16 phy_data; - - outl(0x50000 , ioaddr); - udelay(1); - phy_data = ( inl(ioaddr) >> 19 ) & 0x1; - outl(0x40000 , ioaddr); - udelay(1); - - return phy_data; -} - - -static DEFINE_PCI_DEVICE_TABLE(uli526x_pci_tbl) = { - { 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID }, - { 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID }, - { 0, } -}; -MODULE_DEVICE_TABLE(pci, uli526x_pci_tbl); - - -static struct pci_driver uli526x_driver = { - .name = "uli526x", - .id_table = uli526x_pci_tbl, - .probe = uli526x_init_one, - .remove = __devexit_p(uli526x_remove_one), - .suspend = uli526x_suspend, - .resume = uli526x_resume, -}; - -MODULE_AUTHOR("Peer Chen, peer.chen@uli.com.tw"); -MODULE_DESCRIPTION("ULi M5261/M5263 fast ethernet driver"); -MODULE_LICENSE("GPL"); - -module_param(debug, int, 0644); -module_param(mode, int, 0); -module_param(cr6set, int, 0); -MODULE_PARM_DESC(debug, "ULi M5261/M5263 enable debugging (0-1)"); -MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA"); - -/* Description: - * when user used insmod to add module, system invoked init_module() - * to register the services. - */ - -static int __init uli526x_init_module(void) -{ - - printk(version); - printed_version = 1; - - ULI526X_DBUG(0, "init_module() ", debug); - - if (debug) - uli526x_debug = debug; /* set debug flag */ - if (cr6set) - uli526x_cr6_user_set = cr6set; - - switch (mode) { - case ULI526X_10MHF: - case ULI526X_100MHF: - case ULI526X_10MFD: - case ULI526X_100MFD: - uli526x_media_mode = mode; - break; - default: - uli526x_media_mode = ULI526X_AUTO; - break; - } - - return pci_register_driver(&uli526x_driver); -} - - -/* - * Description: - * when user used rmmod to delete module, system invoked clean_module() - * to un-register all registered services. - */ - -static void __exit uli526x_cleanup_module(void) -{ - ULI526X_DBUG(0, "uli526x_clean_module() ", debug); - pci_unregister_driver(&uli526x_driver); -} - -module_init(uli526x_init_module); -module_exit(uli526x_cleanup_module); diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c deleted file mode 100644 index f0b231035de..00000000000 --- a/drivers/net/tulip/winbond-840.c +++ /dev/null @@ -1,1673 +0,0 @@ -/* winbond-840.c: A Linux PCI network adapter device driver. */ -/* - Written 1998-2001 by Donald Becker. - - This software may be used and distributed according to the terms of - the GNU General Public License (GPL), incorporated herein by reference. - Drivers based on or derived from this code fall under the GPL and must - retain the authorship, copyright and license notice. This file is not - a complete program and may only be used when the entire operating - system is licensed under the GPL. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - Support and updates available at - http://www.scyld.com/network/drivers.html - - Do not remove the copyright information. - Do not change the version information unless an improvement has been made. - Merely removing my name, as Compex has done in the past, does not count - as an improvement. - - Changelog: - * ported to 2.4 - ??? - * spin lock update, memory barriers, new style dma mappings - limit each tx buffer to < 1024 bytes - remove DescIntr from Rx descriptors (that's an Tx flag) - remove next pointer from Tx descriptors - synchronize tx_q_bytes - software reset in tx_timeout - Copyright (C) 2000 Manfred Spraul - * further cleanups - power management. - support for big endian descriptors - Copyright (C) 2001 Manfred Spraul - * ethtool support (jgarzik) - * Replace some MII-related magic numbers with constants (jgarzik) - - TODO: - * enable pci_power_off - * Wake-On-LAN -*/ - -#define DRV_NAME "winbond-840" -#define DRV_VERSION "1.01-e" -#define DRV_RELDATE "Sep-11-2006" - - -/* Automatically extracted configuration info: -probe-func: winbond840_probe -config-in: tristate 'Winbond W89c840 Ethernet support' CONFIG_WINBOND_840 - -c-help-name: Winbond W89c840 PCI Ethernet support -c-help-symbol: CONFIG_WINBOND_840 -c-help: This driver is for the Winbond W89c840 chip. It also works with -c-help: the TX9882 chip on the Compex RL100-ATX board. -c-help: More specific information and updates are available from -c-help: http://www.scyld.com/network/drivers.html -*/ - -/* The user-configurable values. - These may be modified when a driver module is loaded.*/ - -static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ -static int max_interrupt_work = 20; -/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). - The '840 uses a 64 element hash table based on the Ethernet CRC. */ -static int multicast_filter_limit = 32; - -/* Set the copy breakpoint for the copy-only-tiny-frames scheme. - Setting to > 1518 effectively disables this feature. */ -static int rx_copybreak; - -/* Used to pass the media type, etc. - Both 'options[]' and 'full_duplex[]' should exist for driver - interoperability. - The media type is usually passed in 'options[]'. -*/ -#define MAX_UNITS 8 /* More are supported, limit only on options */ -static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; -static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; - -/* Operational parameters that are set at compile time. */ - -/* Keep the ring sizes a power of two for compile efficiency. - The compiler will convert <unsigned>'%'<2^N> into a bit mask. - Making the Tx ring too large decreases the effectiveness of channel - bonding and packet priority. - There are no ill effects from too-large receive rings. */ -#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */ -#define TX_QUEUE_LEN_RESTART 5 - -#define TX_BUFLIMIT (1024-128) - -/* The presumed FIFO size for working around the Tx-FIFO-overflow bug. - To avoid overflowing we don't queue again until we have room for a - full-size packet. - */ -#define TX_FIFO_SIZE (2048) -#define TX_BUG_FIFO_LIMIT (TX_FIFO_SIZE-1514-16) - - -/* Operational parameters that usually are not changed. */ -/* Time in jiffies before concluding the transmitter is hung. */ -#define TX_TIMEOUT (2*HZ) - -/* Include files, designed to support most kernel versions 2.0.0 and later. */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/dma-mapping.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/ethtool.h> -#include <linux/mii.h> -#include <linux/rtnetlink.h> -#include <linux/crc32.h> -#include <linux/bitops.h> -#include <asm/uaccess.h> -#include <asm/processor.h> /* Processor type for cache alignment. */ -#include <asm/io.h> -#include <asm/irq.h> - -#include "tulip.h" - -#undef PKT_BUF_SZ /* tulip.h also defines this */ -#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ - -/* These identify the driver base version and may not be removed. */ -static const char version[] __initconst = - KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) " - DRV_RELDATE " Donald Becker <becker@scyld.com>\n" - " http://www.scyld.com/network/drivers.html\n"; - -MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); -MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); - -module_param(max_interrupt_work, int, 0); -module_param(debug, int, 0); -module_param(rx_copybreak, int, 0); -module_param(multicast_filter_limit, int, 0); -module_param_array(options, int, NULL, 0); -module_param_array(full_duplex, int, NULL, 0); -MODULE_PARM_DESC(max_interrupt_work, "winbond-840 maximum events handled per interrupt"); -MODULE_PARM_DESC(debug, "winbond-840 debug level (0-6)"); -MODULE_PARM_DESC(rx_copybreak, "winbond-840 copy breakpoint for copy-only-tiny-frames"); -MODULE_PARM_DESC(multicast_filter_limit, "winbond-840 maximum number of filtered multicast addresses"); -MODULE_PARM_DESC(options, "winbond-840: Bits 0-3: media type, bit 17: full duplex"); -MODULE_PARM_DESC(full_duplex, "winbond-840 full duplex setting(s) (1)"); - -/* - Theory of Operation - -I. Board Compatibility - -This driver is for the Winbond w89c840 chip. - -II. Board-specific settings - -None. - -III. Driver operation - -This chip is very similar to the Digital 21*4* "Tulip" family. The first -twelve registers and the descriptor format are nearly identical. Read a -Tulip manual for operational details. - -A significant difference is that the multicast filter and station address are -stored in registers rather than loaded through a pseudo-transmit packet. - -Unlike the Tulip, transmit buffers are limited to 1KB. To transmit a -full-sized packet we must use both data buffers in a descriptor. Thus the -driver uses ring mode where descriptors are implicitly sequential in memory, -rather than using the second descriptor address as a chain pointer to -subsequent descriptors. - -IV. Notes - -If you are going to almost clone a Tulip, why not go all the way and avoid -the need for a new driver? - -IVb. References - -http://www.scyld.com/expert/100mbps.html -http://www.scyld.com/expert/NWay.html -http://www.winbond.com.tw/ - -IVc. Errata - -A horrible bug exists in the transmit FIFO. Apparently the chip doesn't -correctly detect a full FIFO, and queuing more than 2048 bytes may result in -silent data corruption. - -Test with 'ping -s 10000' on a fast computer. - -*/ - - - -/* - PCI probe table. -*/ -enum chip_capability_flags { - CanHaveMII=1, HasBrokenTx=2, AlwaysFDX=4, FDXOnNoMII=8, -}; - -static DEFINE_PCI_DEVICE_TABLE(w840_pci_tbl) = { - { 0x1050, 0x0840, PCI_ANY_ID, 0x8153, 0, 0, 0 }, - { 0x1050, 0x0840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, - { 0x11f6, 0x2011, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, - { } -}; -MODULE_DEVICE_TABLE(pci, w840_pci_tbl); - -enum { - netdev_res_size = 128, /* size of PCI BAR resource */ -}; - -struct pci_id_info { - const char *name; - int drv_flags; /* Driver use, intended as capability flags. */ -}; - -static const struct pci_id_info pci_id_tbl[] __devinitdata = { - { /* Sometime a Level-One switch card. */ - "Winbond W89c840", CanHaveMII | HasBrokenTx | FDXOnNoMII}, - { "Winbond W89c840", CanHaveMII | HasBrokenTx}, - { "Compex RL100-ATX", CanHaveMII | HasBrokenTx}, - { } /* terminate list. */ -}; - -/* This driver was written to use PCI memory space, however some x86 systems - work only with I/O space accesses. See CONFIG_TULIP_MMIO in .config -*/ - -/* Offsets to the Command and Status Registers, "CSRs". - While similar to the Tulip, these registers are longword aligned. - Note: It's not useful to define symbolic names for every register bit in - the device. The name can only partially document the semantics and make - the driver longer and more difficult to read. -*/ -enum w840_offsets { - PCIBusCfg=0x00, TxStartDemand=0x04, RxStartDemand=0x08, - RxRingPtr=0x0C, TxRingPtr=0x10, - IntrStatus=0x14, NetworkConfig=0x18, IntrEnable=0x1C, - RxMissed=0x20, EECtrl=0x24, MIICtrl=0x24, BootRom=0x28, GPTimer=0x2C, - CurRxDescAddr=0x30, CurRxBufAddr=0x34, /* Debug use */ - MulticastFilter0=0x38, MulticastFilter1=0x3C, StationAddr=0x40, - CurTxDescAddr=0x4C, CurTxBufAddr=0x50, -}; - -/* Bits in the NetworkConfig register. */ -enum rx_mode_bits { - AcceptErr=0x80, - RxAcceptBroadcast=0x20, AcceptMulticast=0x10, - RxAcceptAllPhys=0x08, AcceptMyPhys=0x02, -}; - -enum mii_reg_bits { - MDIO_ShiftClk=0x10000, MDIO_DataIn=0x80000, MDIO_DataOut=0x20000, - MDIO_EnbOutput=0x40000, MDIO_EnbIn = 0x00000, -}; - -/* The Tulip Rx and Tx buffer descriptors. */ -struct w840_rx_desc { - s32 status; - s32 length; - u32 buffer1; - u32 buffer2; -}; - -struct w840_tx_desc { - s32 status; - s32 length; - u32 buffer1, buffer2; -}; - -#define MII_CNT 1 /* winbond only supports one MII */ -struct netdev_private { - struct w840_rx_desc *rx_ring; - dma_addr_t rx_addr[RX_RING_SIZE]; - struct w840_tx_desc *tx_ring; - dma_addr_t tx_addr[TX_RING_SIZE]; - dma_addr_t ring_dma_addr; - /* The addresses of receive-in-place skbuffs. */ - struct sk_buff* rx_skbuff[RX_RING_SIZE]; - /* The saved address of a sent-in-place packet/buffer, for later free(). */ - struct sk_buff* tx_skbuff[TX_RING_SIZE]; - struct net_device_stats stats; - struct timer_list timer; /* Media monitoring timer. */ - /* Frequently used values: keep some adjacent for cache effect. */ - spinlock_t lock; - int chip_id, drv_flags; - struct pci_dev *pci_dev; - int csr6; - struct w840_rx_desc *rx_head_desc; - unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ - unsigned int rx_buf_sz; /* Based on MTU+slack. */ - unsigned int cur_tx, dirty_tx; - unsigned int tx_q_bytes; - unsigned int tx_full; /* The Tx queue is full. */ - /* MII transceiver section. */ - int mii_cnt; /* MII device addresses. */ - unsigned char phys[MII_CNT]; /* MII device addresses, but only the first is used */ - u32 mii; - struct mii_if_info mii_if; - void __iomem *base_addr; -}; - -static int eeprom_read(void __iomem *ioaddr, int location); -static int mdio_read(struct net_device *dev, int phy_id, int location); -static void mdio_write(struct net_device *dev, int phy_id, int location, int value); -static int netdev_open(struct net_device *dev); -static int update_link(struct net_device *dev); -static void netdev_timer(unsigned long data); -static void init_rxtx_rings(struct net_device *dev); -static void free_rxtx_rings(struct netdev_private *np); -static void init_registers(struct net_device *dev); -static void tx_timeout(struct net_device *dev); -static int alloc_ringdesc(struct net_device *dev); -static void free_ringdesc(struct netdev_private *np); -static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t intr_handler(int irq, void *dev_instance); -static void netdev_error(struct net_device *dev, int intr_status); -static int netdev_rx(struct net_device *dev); -static u32 __set_rx_mode(struct net_device *dev); -static void set_rx_mode(struct net_device *dev); -static struct net_device_stats *get_stats(struct net_device *dev); -static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static const struct ethtool_ops netdev_ethtool_ops; -static int netdev_close(struct net_device *dev); - -static const struct net_device_ops netdev_ops = { - .ndo_open = netdev_open, - .ndo_stop = netdev_close, - .ndo_start_xmit = start_tx, - .ndo_get_stats = get_stats, - .ndo_set_multicast_list = set_rx_mode, - .ndo_do_ioctl = netdev_ioctl, - .ndo_tx_timeout = tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __devinit w840_probe1 (struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct net_device *dev; - struct netdev_private *np; - static int find_cnt; - int chip_idx = ent->driver_data; - int irq; - int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0; - void __iomem *ioaddr; - - i = pci_enable_device(pdev); - if (i) return i; - - pci_set_master(pdev); - - irq = pdev->irq; - - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { - pr_warning("Winbond-840: Device %s disabled due to DMA limitations\n", - pci_name(pdev)); - return -EIO; - } - dev = alloc_etherdev(sizeof(*np)); - if (!dev) - return -ENOMEM; - SET_NETDEV_DEV(dev, &pdev->dev); - - if (pci_request_regions(pdev, DRV_NAME)) - goto err_out_netdev; - - ioaddr = pci_iomap(pdev, TULIP_BAR, netdev_res_size); - if (!ioaddr) - goto err_out_free_res; - - for (i = 0; i < 3; i++) - ((__le16 *)dev->dev_addr)[i] = cpu_to_le16(eeprom_read(ioaddr, i)); - - /* Reset the chip to erase previous misconfiguration. - No hold time required! */ - iowrite32(0x00000001, ioaddr + PCIBusCfg); - - dev->base_addr = (unsigned long)ioaddr; - dev->irq = irq; - - np = netdev_priv(dev); - np->pci_dev = pdev; - np->chip_id = chip_idx; - np->drv_flags = pci_id_tbl[chip_idx].drv_flags; - spin_lock_init(&np->lock); - np->mii_if.dev = dev; - np->mii_if.mdio_read = mdio_read; - np->mii_if.mdio_write = mdio_write; - np->base_addr = ioaddr; - - pci_set_drvdata(pdev, dev); - - if (dev->mem_start) - option = dev->mem_start; - - /* The lower four bits are the media type. */ - if (option > 0) { - if (option & 0x200) - np->mii_if.full_duplex = 1; - if (option & 15) - dev_info(&dev->dev, - "ignoring user supplied media type %d", - option & 15); - } - if (find_cnt < MAX_UNITS && full_duplex[find_cnt] > 0) - np->mii_if.full_duplex = 1; - - if (np->mii_if.full_duplex) - np->mii_if.force_media = 1; - - /* The chip-specific entries in the device structure. */ - dev->netdev_ops = &netdev_ops; - dev->ethtool_ops = &netdev_ethtool_ops; - dev->watchdog_timeo = TX_TIMEOUT; - - i = register_netdev(dev); - if (i) - goto err_out_cleardev; - - dev_info(&dev->dev, "%s at %p, %pM, IRQ %d\n", - pci_id_tbl[chip_idx].name, ioaddr, dev->dev_addr, irq); - - if (np->drv_flags & CanHaveMII) { - int phy, phy_idx = 0; - for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) { - int mii_status = mdio_read(dev, phy, MII_BMSR); - if (mii_status != 0xffff && mii_status != 0x0000) { - np->phys[phy_idx++] = phy; - np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE); - np->mii = (mdio_read(dev, phy, MII_PHYSID1) << 16)+ - mdio_read(dev, phy, MII_PHYSID2); - dev_info(&dev->dev, - "MII PHY %08xh found at address %d, status 0x%04x advertising %04x\n", - np->mii, phy, mii_status, - np->mii_if.advertising); - } - } - np->mii_cnt = phy_idx; - np->mii_if.phy_id = np->phys[0]; - if (phy_idx == 0) { - dev_warn(&dev->dev, - "MII PHY not found -- this device may not operate correctly\n"); - } - } - - find_cnt++; - return 0; - -err_out_cleardev: - pci_set_drvdata(pdev, NULL); - pci_iounmap(pdev, ioaddr); -err_out_free_res: - pci_release_regions(pdev); -err_out_netdev: - free_netdev (dev); - return -ENODEV; -} - - -/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. These are - often serial bit streams generated by the host processor. - The example below is for the common 93c46 EEPROM, 64 16 bit words. */ - -/* Delay between EEPROM clock transitions. - No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need - a delay. Note that pre-2.0.34 kernels had a cache-alignment bug that - made udelay() unreliable. - The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is - deprecated. -*/ -#define eeprom_delay(ee_addr) ioread32(ee_addr) - -enum EEPROM_Ctrl_Bits { - EE_ShiftClk=0x02, EE_Write0=0x801, EE_Write1=0x805, - EE_ChipSelect=0x801, EE_DataIn=0x08, -}; - -/* The EEPROM commands include the alway-set leading bit. */ -enum EEPROM_Cmds { - EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6), -}; - -static int eeprom_read(void __iomem *addr, int location) -{ - int i; - int retval = 0; - void __iomem *ee_addr = addr + EECtrl; - int read_cmd = location | EE_ReadCmd; - iowrite32(EE_ChipSelect, ee_addr); - - /* Shift the read command bits out. */ - for (i = 10; i >= 0; i--) { - short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0; - iowrite32(dataval, ee_addr); - eeprom_delay(ee_addr); - iowrite32(dataval | EE_ShiftClk, ee_addr); - eeprom_delay(ee_addr); - } - iowrite32(EE_ChipSelect, ee_addr); - eeprom_delay(ee_addr); - - for (i = 16; i > 0; i--) { - iowrite32(EE_ChipSelect | EE_ShiftClk, ee_addr); - eeprom_delay(ee_addr); - retval = (retval << 1) | ((ioread32(ee_addr) & EE_DataIn) ? 1 : 0); - iowrite32(EE_ChipSelect, ee_addr); - eeprom_delay(ee_addr); - } - - /* Terminate the EEPROM access. */ - iowrite32(0, ee_addr); - return retval; -} - -/* MII transceiver control section. - Read and write the MII registers using software-generated serial - MDIO protocol. See the MII specifications or DP83840A data sheet - for details. - - The maximum data clock rate is 2.5 Mhz. The minimum timing is usually - met by back-to-back 33Mhz PCI cycles. */ -#define mdio_delay(mdio_addr) ioread32(mdio_addr) - -/* Set iff a MII transceiver on any interface requires mdio preamble. - This only set with older transceivers, so the extra - code size of a per-interface flag is not worthwhile. */ -static char mii_preamble_required = 1; - -#define MDIO_WRITE0 (MDIO_EnbOutput) -#define MDIO_WRITE1 (MDIO_DataOut | MDIO_EnbOutput) - -/* Generate the preamble required for initial synchronization and - a few older transceivers. */ -static void mdio_sync(void __iomem *mdio_addr) -{ - int bits = 32; - - /* Establish sync by sending at least 32 logic ones. */ - while (--bits >= 0) { - iowrite32(MDIO_WRITE1, mdio_addr); - mdio_delay(mdio_addr); - iowrite32(MDIO_WRITE1 | MDIO_ShiftClk, mdio_addr); - mdio_delay(mdio_addr); - } -} - -static int mdio_read(struct net_device *dev, int phy_id, int location) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *mdio_addr = np->base_addr + MIICtrl; - int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; - int i, retval = 0; - - if (mii_preamble_required) - mdio_sync(mdio_addr); - - /* Shift the read command bits out. */ - for (i = 15; i >= 0; i--) { - int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; - - iowrite32(dataval, mdio_addr); - mdio_delay(mdio_addr); - iowrite32(dataval | MDIO_ShiftClk, mdio_addr); - mdio_delay(mdio_addr); - } - /* Read the two transition, 16 data, and wire-idle bits. */ - for (i = 20; i > 0; i--) { - iowrite32(MDIO_EnbIn, mdio_addr); - mdio_delay(mdio_addr); - retval = (retval << 1) | ((ioread32(mdio_addr) & MDIO_DataIn) ? 1 : 0); - iowrite32(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); - mdio_delay(mdio_addr); - } - return (retval>>1) & 0xffff; -} - -static void mdio_write(struct net_device *dev, int phy_id, int location, int value) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *mdio_addr = np->base_addr + MIICtrl; - int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value; - int i; - - if (location == 4 && phy_id == np->phys[0]) - np->mii_if.advertising = value; - - if (mii_preamble_required) - mdio_sync(mdio_addr); - - /* Shift the command bits out. */ - for (i = 31; i >= 0; i--) { - int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; - - iowrite32(dataval, mdio_addr); - mdio_delay(mdio_addr); - iowrite32(dataval | MDIO_ShiftClk, mdio_addr); - mdio_delay(mdio_addr); - } - /* Clear out extra bits. */ - for (i = 2; i > 0; i--) { - iowrite32(MDIO_EnbIn, mdio_addr); - mdio_delay(mdio_addr); - iowrite32(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); - mdio_delay(mdio_addr); - } -} - - -static int netdev_open(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base_addr; - int i; - - iowrite32(0x00000001, ioaddr + PCIBusCfg); /* Reset */ - - netif_device_detach(dev); - i = request_irq(dev->irq, intr_handler, IRQF_SHARED, dev->name, dev); - if (i) - goto out_err; - - if (debug > 1) - printk(KERN_DEBUG "%s: w89c840_open() irq %d\n", - dev->name, dev->irq); - - if((i=alloc_ringdesc(dev))) - goto out_err; - - spin_lock_irq(&np->lock); - netif_device_attach(dev); - init_registers(dev); - spin_unlock_irq(&np->lock); - - netif_start_queue(dev); - if (debug > 2) - printk(KERN_DEBUG "%s: Done netdev_open()\n", dev->name); - - /* Set the timer to check for link beat. */ - init_timer(&np->timer); - np->timer.expires = jiffies + 1*HZ; - np->timer.data = (unsigned long)dev; - np->timer.function = netdev_timer; /* timer handler */ - add_timer(&np->timer); - return 0; -out_err: - netif_device_attach(dev); - return i; -} - -#define MII_DAVICOM_DM9101 0x0181b800 - -static int update_link(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - int duplex, fasteth, result, mii_reg; - - /* BSMR */ - mii_reg = mdio_read(dev, np->phys[0], MII_BMSR); - - if (mii_reg == 0xffff) - return np->csr6; - /* reread: the link status bit is sticky */ - mii_reg = mdio_read(dev, np->phys[0], MII_BMSR); - if (!(mii_reg & 0x4)) { - if (netif_carrier_ok(dev)) { - if (debug) - dev_info(&dev->dev, - "MII #%d reports no link. Disabling watchdog\n", - np->phys[0]); - netif_carrier_off(dev); - } - return np->csr6; - } - if (!netif_carrier_ok(dev)) { - if (debug) - dev_info(&dev->dev, - "MII #%d link is back. Enabling watchdog\n", - np->phys[0]); - netif_carrier_on(dev); - } - - if ((np->mii & ~0xf) == MII_DAVICOM_DM9101) { - /* If the link partner doesn't support autonegotiation - * the MII detects it's abilities with the "parallel detection". - * Some MIIs update the LPA register to the result of the parallel - * detection, some don't. - * The Davicom PHY [at least 0181b800] doesn't. - * Instead bit 9 and 13 of the BMCR are updated to the result - * of the negotiation.. - */ - mii_reg = mdio_read(dev, np->phys[0], MII_BMCR); - duplex = mii_reg & BMCR_FULLDPLX; - fasteth = mii_reg & BMCR_SPEED100; - } else { - int negotiated; - mii_reg = mdio_read(dev, np->phys[0], MII_LPA); - negotiated = mii_reg & np->mii_if.advertising; - - duplex = (negotiated & LPA_100FULL) || ((negotiated & 0x02C0) == LPA_10FULL); - fasteth = negotiated & 0x380; - } - duplex |= np->mii_if.force_media; - /* remove fastether and fullduplex */ - result = np->csr6 & ~0x20000200; - if (duplex) - result |= 0x200; - if (fasteth) - result |= 0x20000000; - if (result != np->csr6 && debug) - dev_info(&dev->dev, - "Setting %dMBit-%s-duplex based on MII#%d\n", - fasteth ? 100 : 10, duplex ? "full" : "half", - np->phys[0]); - return result; -} - -#define RXTX_TIMEOUT 2000 -static inline void update_csr6(struct net_device *dev, int new) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base_addr; - int limit = RXTX_TIMEOUT; - - if (!netif_device_present(dev)) - new = 0; - if (new==np->csr6) - return; - /* stop both Tx and Rx processes */ - iowrite32(np->csr6 & ~0x2002, ioaddr + NetworkConfig); - /* wait until they have really stopped */ - for (;;) { - int csr5 = ioread32(ioaddr + IntrStatus); - int t; - - t = (csr5 >> 17) & 0x07; - if (t==0||t==1) { - /* rx stopped */ - t = (csr5 >> 20) & 0x07; - if (t==0||t==1) - break; - } - - limit--; - if(!limit) { - dev_info(&dev->dev, - "couldn't stop rxtx, IntrStatus %xh\n", csr5); - break; - } - udelay(1); - } - np->csr6 = new; - /* and restart them with the new configuration */ - iowrite32(np->csr6, ioaddr + NetworkConfig); - if (new & 0x200) - np->mii_if.full_duplex = 1; -} - -static void netdev_timer(unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base_addr; - - if (debug > 2) - printk(KERN_DEBUG "%s: Media selection timer tick, status %08x config %08x\n", - dev->name, ioread32(ioaddr + IntrStatus), - ioread32(ioaddr + NetworkConfig)); - spin_lock_irq(&np->lock); - update_csr6(dev, update_link(dev)); - spin_unlock_irq(&np->lock); - np->timer.expires = jiffies + 10*HZ; - add_timer(&np->timer); -} - -static void init_rxtx_rings(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - int i; - - np->rx_head_desc = &np->rx_ring[0]; - np->tx_ring = (struct w840_tx_desc*)&np->rx_ring[RX_RING_SIZE]; - - /* Initial all Rx descriptors. */ - for (i = 0; i < RX_RING_SIZE; i++) { - np->rx_ring[i].length = np->rx_buf_sz; - np->rx_ring[i].status = 0; - np->rx_skbuff[i] = NULL; - } - /* Mark the last entry as wrapping the ring. */ - np->rx_ring[i-1].length |= DescEndRing; - - /* Fill in the Rx buffers. Handle allocation failure gracefully. */ - for (i = 0; i < RX_RING_SIZE; i++) { - struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz); - np->rx_skbuff[i] = skb; - if (skb == NULL) - break; - np->rx_addr[i] = pci_map_single(np->pci_dev,skb->data, - np->rx_buf_sz,PCI_DMA_FROMDEVICE); - - np->rx_ring[i].buffer1 = np->rx_addr[i]; - np->rx_ring[i].status = DescOwned; - } - - np->cur_rx = 0; - np->dirty_rx = (unsigned int)(i - RX_RING_SIZE); - - /* Initialize the Tx descriptors */ - for (i = 0; i < TX_RING_SIZE; i++) { - np->tx_skbuff[i] = NULL; - np->tx_ring[i].status = 0; - } - np->tx_full = 0; - np->tx_q_bytes = np->dirty_tx = np->cur_tx = 0; - - iowrite32(np->ring_dma_addr, np->base_addr + RxRingPtr); - iowrite32(np->ring_dma_addr+sizeof(struct w840_rx_desc)*RX_RING_SIZE, - np->base_addr + TxRingPtr); - -} - -static void free_rxtx_rings(struct netdev_private* np) -{ - int i; - /* Free all the skbuffs in the Rx queue. */ - for (i = 0; i < RX_RING_SIZE; i++) { - np->rx_ring[i].status = 0; - if (np->rx_skbuff[i]) { - pci_unmap_single(np->pci_dev, - np->rx_addr[i], - np->rx_skbuff[i]->len, - PCI_DMA_FROMDEVICE); - dev_kfree_skb(np->rx_skbuff[i]); - } - np->rx_skbuff[i] = NULL; - } - for (i = 0; i < TX_RING_SIZE; i++) { - if (np->tx_skbuff[i]) { - pci_unmap_single(np->pci_dev, - np->tx_addr[i], - np->tx_skbuff[i]->len, - PCI_DMA_TODEVICE); - dev_kfree_skb(np->tx_skbuff[i]); - } - np->tx_skbuff[i] = NULL; - } -} - -static void init_registers(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base_addr; - int i; - - for (i = 0; i < 6; i++) - iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i); - - /* Initialize other registers. */ -#ifdef __BIG_ENDIAN - i = (1<<20); /* Big-endian descriptors */ -#else - i = 0; -#endif - i |= (0x04<<2); /* skip length 4 u32 */ - i |= 0x02; /* give Rx priority */ - - /* Configure the PCI bus bursts and FIFO thresholds. - 486: Set 8 longword cache alignment, 8 longword burst. - 586: Set 16 longword cache alignment, no burst limit. - Cache alignment bits 15:14 Burst length 13:8 - 0000 <not allowed> 0000 align to cache 0800 8 longwords - 4000 8 longwords 0100 1 longword 1000 16 longwords - 8000 16 longwords 0200 2 longwords 2000 32 longwords - C000 32 longwords 0400 4 longwords */ - -#if defined (__i386__) && !defined(MODULE) - /* When not a module we can work around broken '486 PCI boards. */ - if (boot_cpu_data.x86 <= 4) { - i |= 0x4800; - dev_info(&dev->dev, - "This is a 386/486 PCI system, setting cache alignment to 8 longwords\n"); - } else { - i |= 0xE000; - } -#elif defined(__powerpc__) || defined(__i386__) || defined(__alpha__) || defined(__ia64__) || defined(__x86_64__) - i |= 0xE000; -#elif defined(CONFIG_SPARC) || defined (CONFIG_PARISC) - i |= 0x4800; -#else -#warning Processor architecture undefined - i |= 0x4800; -#endif - iowrite32(i, ioaddr + PCIBusCfg); - - np->csr6 = 0; - /* 128 byte Tx threshold; - Transmit on; Receive on; */ - update_csr6(dev, 0x00022002 | update_link(dev) | __set_rx_mode(dev)); - - /* Clear and Enable interrupts by setting the interrupt mask. */ - iowrite32(0x1A0F5, ioaddr + IntrStatus); - iowrite32(0x1A0F5, ioaddr + IntrEnable); - - iowrite32(0, ioaddr + RxStartDemand); -} - -static void tx_timeout(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base_addr; - - dev_warn(&dev->dev, "Transmit timed out, status %08x, resetting...\n", - ioread32(ioaddr + IntrStatus)); - - { - int i; - printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring); - for (i = 0; i < RX_RING_SIZE; i++) - printk(KERN_CONT " %08x", (unsigned int)np->rx_ring[i].status); - printk(KERN_CONT "\n"); - printk(KERN_DEBUG " Tx ring %p: ", np->tx_ring); - for (i = 0; i < TX_RING_SIZE; i++) - printk(KERN_CONT " %08x", np->tx_ring[i].status); - printk(KERN_CONT "\n"); - } - printk(KERN_DEBUG "Tx cur %d Tx dirty %d Tx Full %d, q bytes %d\n", - np->cur_tx, np->dirty_tx, np->tx_full, np->tx_q_bytes); - printk(KERN_DEBUG "Tx Descriptor addr %xh\n", ioread32(ioaddr+0x4C)); - - disable_irq(dev->irq); - spin_lock_irq(&np->lock); - /* - * Under high load dirty_tx and the internal tx descriptor pointer - * come out of sync, thus perform a software reset and reinitialize - * everything. - */ - - iowrite32(1, np->base_addr+PCIBusCfg); - udelay(1); - - free_rxtx_rings(np); - init_rxtx_rings(dev); - init_registers(dev); - spin_unlock_irq(&np->lock); - enable_irq(dev->irq); - - netif_wake_queue(dev); - dev->trans_start = jiffies; /* prevent tx timeout */ - np->stats.tx_errors++; -} - -/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ -static int alloc_ringdesc(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - - np->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); - - np->rx_ring = pci_alloc_consistent(np->pci_dev, - sizeof(struct w840_rx_desc)*RX_RING_SIZE + - sizeof(struct w840_tx_desc)*TX_RING_SIZE, - &np->ring_dma_addr); - if(!np->rx_ring) - return -ENOMEM; - init_rxtx_rings(dev); - return 0; -} - -static void free_ringdesc(struct netdev_private *np) -{ - pci_free_consistent(np->pci_dev, - sizeof(struct w840_rx_desc)*RX_RING_SIZE + - sizeof(struct w840_tx_desc)*TX_RING_SIZE, - np->rx_ring, np->ring_dma_addr); - -} - -static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - unsigned entry; - - /* Caution: the write order is important here, set the field - with the "ownership" bits last. */ - - /* Calculate the next Tx descriptor entry. */ - entry = np->cur_tx % TX_RING_SIZE; - - np->tx_addr[entry] = pci_map_single(np->pci_dev, - skb->data,skb->len, PCI_DMA_TODEVICE); - np->tx_skbuff[entry] = skb; - - np->tx_ring[entry].buffer1 = np->tx_addr[entry]; - if (skb->len < TX_BUFLIMIT) { - np->tx_ring[entry].length = DescWholePkt | skb->len; - } else { - int len = skb->len - TX_BUFLIMIT; - - np->tx_ring[entry].buffer2 = np->tx_addr[entry]+TX_BUFLIMIT; - np->tx_ring[entry].length = DescWholePkt | (len << 11) | TX_BUFLIMIT; - } - if(entry == TX_RING_SIZE-1) - np->tx_ring[entry].length |= DescEndRing; - - /* Now acquire the irq spinlock. - * The difficult race is the ordering between - * increasing np->cur_tx and setting DescOwned: - * - if np->cur_tx is increased first the interrupt - * handler could consider the packet as transmitted - * since DescOwned is cleared. - * - If DescOwned is set first the NIC could report the - * packet as sent, but the interrupt handler would ignore it - * since the np->cur_tx was not yet increased. - */ - spin_lock_irq(&np->lock); - np->cur_tx++; - - wmb(); /* flush length, buffer1, buffer2 */ - np->tx_ring[entry].status = DescOwned; - wmb(); /* flush status and kick the hardware */ - iowrite32(0, np->base_addr + TxStartDemand); - np->tx_q_bytes += skb->len; - /* Work around horrible bug in the chip by marking the queue as full - when we do not have FIFO room for a maximum sized packet. */ - if (np->cur_tx - np->dirty_tx > TX_QUEUE_LEN || - ((np->drv_flags & HasBrokenTx) && np->tx_q_bytes > TX_BUG_FIFO_LIMIT)) { - netif_stop_queue(dev); - wmb(); - np->tx_full = 1; - } - spin_unlock_irq(&np->lock); - - if (debug > 4) { - printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d\n", - dev->name, np->cur_tx, entry); - } - return NETDEV_TX_OK; -} - -static void netdev_tx_done(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { - int entry = np->dirty_tx % TX_RING_SIZE; - int tx_status = np->tx_ring[entry].status; - - if (tx_status < 0) - break; - if (tx_status & 0x8000) { /* There was an error, log it. */ -#ifndef final_version - if (debug > 1) - printk(KERN_DEBUG "%s: Transmit error, Tx status %08x\n", - dev->name, tx_status); -#endif - np->stats.tx_errors++; - if (tx_status & 0x0104) np->stats.tx_aborted_errors++; - if (tx_status & 0x0C80) np->stats.tx_carrier_errors++; - if (tx_status & 0x0200) np->stats.tx_window_errors++; - if (tx_status & 0x0002) np->stats.tx_fifo_errors++; - if ((tx_status & 0x0080) && np->mii_if.full_duplex == 0) - np->stats.tx_heartbeat_errors++; - } else { -#ifndef final_version - if (debug > 3) - printk(KERN_DEBUG "%s: Transmit slot %d ok, Tx status %08x\n", - dev->name, entry, tx_status); -#endif - np->stats.tx_bytes += np->tx_skbuff[entry]->len; - np->stats.collisions += (tx_status >> 3) & 15; - np->stats.tx_packets++; - } - /* Free the original skb. */ - pci_unmap_single(np->pci_dev,np->tx_addr[entry], - np->tx_skbuff[entry]->len, - PCI_DMA_TODEVICE); - np->tx_q_bytes -= np->tx_skbuff[entry]->len; - dev_kfree_skb_irq(np->tx_skbuff[entry]); - np->tx_skbuff[entry] = NULL; - } - if (np->tx_full && - np->cur_tx - np->dirty_tx < TX_QUEUE_LEN_RESTART && - np->tx_q_bytes < TX_BUG_FIFO_LIMIT) { - /* The ring is no longer full, clear tbusy. */ - np->tx_full = 0; - wmb(); - netif_wake_queue(dev); - } -} - -/* The interrupt handler does all of the Rx thread work and cleans up - after the Tx thread. */ -static irqreturn_t intr_handler(int irq, void *dev_instance) -{ - struct net_device *dev = (struct net_device *)dev_instance; - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base_addr; - int work_limit = max_interrupt_work; - int handled = 0; - - if (!netif_device_present(dev)) - return IRQ_NONE; - do { - u32 intr_status = ioread32(ioaddr + IntrStatus); - - /* Acknowledge all of the current interrupt sources ASAP. */ - iowrite32(intr_status & 0x001ffff, ioaddr + IntrStatus); - - if (debug > 4) - printk(KERN_DEBUG "%s: Interrupt, status %04x\n", - dev->name, intr_status); - - if ((intr_status & (NormalIntr|AbnormalIntr)) == 0) - break; - - handled = 1; - - if (intr_status & (RxIntr | RxNoBuf)) - netdev_rx(dev); - if (intr_status & RxNoBuf) - iowrite32(0, ioaddr + RxStartDemand); - - if (intr_status & (TxNoBuf | TxIntr) && - np->cur_tx != np->dirty_tx) { - spin_lock(&np->lock); - netdev_tx_done(dev); - spin_unlock(&np->lock); - } - - /* Abnormal error summary/uncommon events handlers. */ - if (intr_status & (AbnormalIntr | TxFIFOUnderflow | SystemError | - TimerInt | TxDied)) - netdev_error(dev, intr_status); - - if (--work_limit < 0) { - dev_warn(&dev->dev, - "Too much work at interrupt, status=0x%04x\n", - intr_status); - /* Set the timer to re-enable the other interrupts after - 10*82usec ticks. */ - spin_lock(&np->lock); - if (netif_device_present(dev)) { - iowrite32(AbnormalIntr | TimerInt, ioaddr + IntrEnable); - iowrite32(10, ioaddr + GPTimer); - } - spin_unlock(&np->lock); - break; - } - } while (1); - - if (debug > 3) - printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x\n", - dev->name, ioread32(ioaddr + IntrStatus)); - return IRQ_RETVAL(handled); -} - -/* This routine is logically part of the interrupt handler, but separated - for clarity and better register allocation. */ -static int netdev_rx(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - int entry = np->cur_rx % RX_RING_SIZE; - int work_limit = np->dirty_rx + RX_RING_SIZE - np->cur_rx; - - if (debug > 4) { - printk(KERN_DEBUG " In netdev_rx(), entry %d status %04x\n", - entry, np->rx_ring[entry].status); - } - - /* If EOP is set on the next entry, it's a new packet. Send it up. */ - while (--work_limit >= 0) { - struct w840_rx_desc *desc = np->rx_head_desc; - s32 status = desc->status; - - if (debug > 4) - printk(KERN_DEBUG " netdev_rx() status was %08x\n", - status); - if (status < 0) - break; - if ((status & 0x38008300) != 0x0300) { - if ((status & 0x38000300) != 0x0300) { - /* Ingore earlier buffers. */ - if ((status & 0xffff) != 0x7fff) { - dev_warn(&dev->dev, - "Oversized Ethernet frame spanned multiple buffers, entry %#x status %04x!\n", - np->cur_rx, status); - np->stats.rx_length_errors++; - } - } else if (status & 0x8000) { - /* There was a fatal error. */ - if (debug > 2) - printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n", - dev->name, status); - np->stats.rx_errors++; /* end of a packet.*/ - if (status & 0x0890) np->stats.rx_length_errors++; - if (status & 0x004C) np->stats.rx_frame_errors++; - if (status & 0x0002) np->stats.rx_crc_errors++; - } - } else { - struct sk_buff *skb; - /* Omit the four octet CRC from the length. */ - int pkt_len = ((status >> 16) & 0x7ff) - 4; - -#ifndef final_version - if (debug > 4) - printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d status %x\n", - pkt_len, status); -#endif - /* Check if the packet is long enough to accept without copying - to a minimally-sized skbuff. */ - if (pkt_len < rx_copybreak && - (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { - skb_reserve(skb, 2); /* 16 byte align the IP header */ - pci_dma_sync_single_for_cpu(np->pci_dev,np->rx_addr[entry], - np->rx_skbuff[entry]->len, - PCI_DMA_FROMDEVICE); - skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len); - skb_put(skb, pkt_len); - pci_dma_sync_single_for_device(np->pci_dev,np->rx_addr[entry], - np->rx_skbuff[entry]->len, - PCI_DMA_FROMDEVICE); - } else { - pci_unmap_single(np->pci_dev,np->rx_addr[entry], - np->rx_skbuff[entry]->len, - PCI_DMA_FROMDEVICE); - skb_put(skb = np->rx_skbuff[entry], pkt_len); - np->rx_skbuff[entry] = NULL; - } -#ifndef final_version /* Remove after testing. */ - /* You will want this info for the initial debug. */ - if (debug > 5) - printk(KERN_DEBUG " Rx data %pM %pM %02x%02x %pI4\n", - &skb->data[0], &skb->data[6], - skb->data[12], skb->data[13], - &skb->data[14]); -#endif - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - np->stats.rx_packets++; - np->stats.rx_bytes += pkt_len; - } - entry = (++np->cur_rx) % RX_RING_SIZE; - np->rx_head_desc = &np->rx_ring[entry]; - } - - /* Refill the Rx ring buffers. */ - for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) { - struct sk_buff *skb; - entry = np->dirty_rx % RX_RING_SIZE; - if (np->rx_skbuff[entry] == NULL) { - skb = dev_alloc_skb(np->rx_buf_sz); - np->rx_skbuff[entry] = skb; - if (skb == NULL) - break; /* Better luck next round. */ - np->rx_addr[entry] = pci_map_single(np->pci_dev, - skb->data, - np->rx_buf_sz, PCI_DMA_FROMDEVICE); - np->rx_ring[entry].buffer1 = np->rx_addr[entry]; - } - wmb(); - np->rx_ring[entry].status = DescOwned; - } - - return 0; -} - -static void netdev_error(struct net_device *dev, int intr_status) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base_addr; - - if (debug > 2) - printk(KERN_DEBUG "%s: Abnormal event, %08x\n", - dev->name, intr_status); - if (intr_status == 0xffffffff) - return; - spin_lock(&np->lock); - if (intr_status & TxFIFOUnderflow) { - int new; - /* Bump up the Tx threshold */ -#if 0 - /* This causes lots of dropped packets, - * and under high load even tx_timeouts - */ - new = np->csr6 + 0x4000; -#else - new = (np->csr6 >> 14)&0x7f; - if (new < 64) - new *= 2; - else - new = 127; /* load full packet before starting */ - new = (np->csr6 & ~(0x7F << 14)) | (new<<14); -#endif - printk(KERN_DEBUG "%s: Tx underflow, new csr6 %08x\n", - dev->name, new); - update_csr6(dev, new); - } - if (intr_status & RxDied) { /* Missed a Rx frame. */ - np->stats.rx_errors++; - } - if (intr_status & TimerInt) { - /* Re-enable other interrupts. */ - if (netif_device_present(dev)) - iowrite32(0x1A0F5, ioaddr + IntrEnable); - } - np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff; - iowrite32(0, ioaddr + RxStartDemand); - spin_unlock(&np->lock); -} - -static struct net_device_stats *get_stats(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base_addr; - - /* The chip only need report frame silently dropped. */ - spin_lock_irq(&np->lock); - if (netif_running(dev) && netif_device_present(dev)) - np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff; - spin_unlock_irq(&np->lock); - - return &np->stats; -} - - -static u32 __set_rx_mode(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base_addr; - u32 mc_filter[2]; /* Multicast hash filter */ - u32 rx_mode; - - if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ - memset(mc_filter, 0xff, sizeof(mc_filter)); - rx_mode = RxAcceptBroadcast | AcceptMulticast | RxAcceptAllPhys - | AcceptMyPhys; - } else if ((netdev_mc_count(dev) > multicast_filter_limit) || - (dev->flags & IFF_ALLMULTI)) { - /* Too many to match, or accept all multicasts. */ - memset(mc_filter, 0xff, sizeof(mc_filter)); - rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys; - } else { - struct netdev_hw_addr *ha; - - memset(mc_filter, 0, sizeof(mc_filter)); - netdev_for_each_mc_addr(ha, dev) { - int filbit; - - filbit = (ether_crc(ETH_ALEN, ha->addr) >> 26) ^ 0x3F; - filbit &= 0x3f; - mc_filter[filbit >> 5] |= 1 << (filbit & 31); - } - rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys; - } - iowrite32(mc_filter[0], ioaddr + MulticastFilter0); - iowrite32(mc_filter[1], ioaddr + MulticastFilter1); - return rx_mode; -} - -static void set_rx_mode(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - u32 rx_mode = __set_rx_mode(dev); - spin_lock_irq(&np->lock); - update_csr6(dev, (np->csr6 & ~0x00F8) | rx_mode); - spin_unlock_irq(&np->lock); -} - -static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info) -{ - struct netdev_private *np = netdev_priv(dev); - - strcpy (info->driver, DRV_NAME); - strcpy (info->version, DRV_VERSION); - strcpy (info->bus_info, pci_name(np->pci_dev)); -} - -static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) -{ - struct netdev_private *np = netdev_priv(dev); - int rc; - - spin_lock_irq(&np->lock); - rc = mii_ethtool_gset(&np->mii_if, cmd); - spin_unlock_irq(&np->lock); - - return rc; -} - -static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) -{ - struct netdev_private *np = netdev_priv(dev); - int rc; - - spin_lock_irq(&np->lock); - rc = mii_ethtool_sset(&np->mii_if, cmd); - spin_unlock_irq(&np->lock); - - return rc; -} - -static int netdev_nway_reset(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - return mii_nway_restart(&np->mii_if); -} - -static u32 netdev_get_link(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - return mii_link_ok(&np->mii_if); -} - -static u32 netdev_get_msglevel(struct net_device *dev) -{ - return debug; -} - -static void netdev_set_msglevel(struct net_device *dev, u32 value) -{ - debug = value; -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, - .get_settings = netdev_get_settings, - .set_settings = netdev_set_settings, - .nway_reset = netdev_nway_reset, - .get_link = netdev_get_link, - .get_msglevel = netdev_get_msglevel, - .set_msglevel = netdev_set_msglevel, -}; - -static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct mii_ioctl_data *data = if_mii(rq); - struct netdev_private *np = netdev_priv(dev); - - switch(cmd) { - case SIOCGMIIPHY: /* Get address of MII PHY in use. */ - data->phy_id = ((struct netdev_private *)netdev_priv(dev))->phys[0] & 0x1f; - /* Fall Through */ - - case SIOCGMIIREG: /* Read MII PHY register. */ - spin_lock_irq(&np->lock); - data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f); - spin_unlock_irq(&np->lock); - return 0; - - case SIOCSMIIREG: /* Write MII PHY register. */ - spin_lock_irq(&np->lock); - mdio_write(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); - spin_unlock_irq(&np->lock); - return 0; - default: - return -EOPNOTSUPP; - } -} - -static int netdev_close(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base_addr; - - netif_stop_queue(dev); - - if (debug > 1) { - printk(KERN_DEBUG "%s: Shutting down ethercard, status was %08x Config %08x\n", - dev->name, ioread32(ioaddr + IntrStatus), - ioread32(ioaddr + NetworkConfig)); - printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d\n", - dev->name, - np->cur_tx, np->dirty_tx, - np->cur_rx, np->dirty_rx); - } - - /* Stop the chip's Tx and Rx processes. */ - spin_lock_irq(&np->lock); - netif_device_detach(dev); - update_csr6(dev, 0); - iowrite32(0x0000, ioaddr + IntrEnable); - spin_unlock_irq(&np->lock); - - free_irq(dev->irq, dev); - wmb(); - netif_device_attach(dev); - - if (ioread32(ioaddr + NetworkConfig) != 0xffffffff) - np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff; - -#ifdef __i386__ - if (debug > 2) { - int i; - - printk(KERN_DEBUG" Tx ring at %p:\n", np->tx_ring); - for (i = 0; i < TX_RING_SIZE; i++) - printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n", - i, np->tx_ring[i].length, - np->tx_ring[i].status, np->tx_ring[i].buffer1); - printk(KERN_DEBUG " Rx ring %p:\n", np->rx_ring); - for (i = 0; i < RX_RING_SIZE; i++) { - printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n", - i, np->rx_ring[i].length, - np->rx_ring[i].status, np->rx_ring[i].buffer1); - } - } -#endif /* __i386__ debugging only */ - - del_timer_sync(&np->timer); - - free_rxtx_rings(np); - free_ringdesc(np); - - return 0; -} - -static void __devexit w840_remove1 (struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - - if (dev) { - struct netdev_private *np = netdev_priv(dev); - unregister_netdev(dev); - pci_release_regions(pdev); - pci_iounmap(pdev, np->base_addr); - free_netdev(dev); - } - - pci_set_drvdata(pdev, NULL); -} - -#ifdef CONFIG_PM - -/* - * suspend/resume synchronization: - * - open, close, do_ioctl: - * rtnl_lock, & netif_device_detach after the rtnl_unlock. - * - get_stats: - * spin_lock_irq(np->lock), doesn't touch hw if not present - * - start_xmit: - * synchronize_irq + netif_tx_disable; - * - tx_timeout: - * netif_device_detach + netif_tx_disable; - * - set_multicast_list - * netif_device_detach + netif_tx_disable; - * - interrupt handler - * doesn't touch hw if not present, synchronize_irq waits for - * running instances of the interrupt handler. - * - * Disabling hw requires clearing csr6 & IntrEnable. - * update_csr6 & all function that write IntrEnable check netif_device_present - * before settings any bits. - * - * Detach must occur under spin_unlock_irq(), interrupts from a detached - * device would cause an irq storm. - */ -static int w840_suspend (struct pci_dev *pdev, pm_message_t state) -{ - struct net_device *dev = pci_get_drvdata (pdev); - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base_addr; - - rtnl_lock(); - if (netif_running (dev)) { - del_timer_sync(&np->timer); - - spin_lock_irq(&np->lock); - netif_device_detach(dev); - update_csr6(dev, 0); - iowrite32(0, ioaddr + IntrEnable); - spin_unlock_irq(&np->lock); - - synchronize_irq(dev->irq); - netif_tx_disable(dev); - - np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff; - - /* no more hardware accesses behind this line. */ - - BUG_ON(np->csr6 || ioread32(ioaddr + IntrEnable)); - - /* pci_power_off(pdev, -1); */ - - free_rxtx_rings(np); - } else { - netif_device_detach(dev); - } - rtnl_unlock(); - return 0; -} - -static int w840_resume (struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata (pdev); - struct netdev_private *np = netdev_priv(dev); - int retval = 0; - - rtnl_lock(); - if (netif_device_present(dev)) - goto out; /* device not suspended */ - if (netif_running(dev)) { - if ((retval = pci_enable_device(pdev))) { - dev_err(&dev->dev, - "pci_enable_device failed in resume\n"); - goto out; - } - spin_lock_irq(&np->lock); - iowrite32(1, np->base_addr+PCIBusCfg); - ioread32(np->base_addr+PCIBusCfg); - udelay(1); - netif_device_attach(dev); - init_rxtx_rings(dev); - init_registers(dev); - spin_unlock_irq(&np->lock); - - netif_wake_queue(dev); - - mod_timer(&np->timer, jiffies + 1*HZ); - } else { - netif_device_attach(dev); - } -out: - rtnl_unlock(); - return retval; -} -#endif - -static struct pci_driver w840_driver = { - .name = DRV_NAME, - .id_table = w840_pci_tbl, - .probe = w840_probe1, - .remove = __devexit_p(w840_remove1), -#ifdef CONFIG_PM - .suspend = w840_suspend, - .resume = w840_resume, -#endif -}; - -static int __init w840_init(void) -{ - printk(version); - return pci_register_driver(&w840_driver); -} - -static void __exit w840_exit(void) -{ - pci_unregister_driver(&w840_driver); -} - -module_init(w840_init); -module_exit(w840_exit); diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c deleted file mode 100644 index 5a73752be2c..00000000000 --- a/drivers/net/tulip/xircom_cb.c +++ /dev/null @@ -1,1252 +0,0 @@ -/* - * xircom_cb: A driver for the (tulip-like) Xircom Cardbus ethernet cards - * - * This software is (C) by the respective authors, and licensed under the GPL - * License. - * - * Written by Arjan van de Ven for Red Hat, Inc. - * Based on work by Jeff Garzik, Doug Ledford and Donald Becker - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * - * $Id: xircom_cb.c,v 1.33 2001/03/19 14:02:07 arjanv Exp $ - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/bitops.h> - -#include <asm/uaccess.h> -#include <asm/io.h> -#ifdef CONFIG_NET_POLL_CONTROLLER -#include <asm/irq.h> -#endif - -#ifdef DEBUG -#define enter(x) printk("Enter: %s, %s line %i\n",x,__FILE__,__LINE__) -#define leave(x) printk("Leave: %s, %s line %i\n",x,__FILE__,__LINE__) -#else -#define enter(x) do {} while (0) -#define leave(x) do {} while (0) -#endif - - -MODULE_DESCRIPTION("Xircom Cardbus ethernet driver"); -MODULE_AUTHOR("Arjan van de Ven <arjanv@redhat.com>"); -MODULE_LICENSE("GPL"); - - - -/* IO registers on the card, offsets */ -#define CSR0 0x00 -#define CSR1 0x08 -#define CSR2 0x10 -#define CSR3 0x18 -#define CSR4 0x20 -#define CSR5 0x28 -#define CSR6 0x30 -#define CSR7 0x38 -#define CSR8 0x40 -#define CSR9 0x48 -#define CSR10 0x50 -#define CSR11 0x58 -#define CSR12 0x60 -#define CSR13 0x68 -#define CSR14 0x70 -#define CSR15 0x78 -#define CSR16 0x80 - -/* PCI registers */ -#define PCI_POWERMGMT 0x40 - -/* Offsets of the buffers within the descriptor pages, in bytes */ - -#define NUMDESCRIPTORS 4 - -static int bufferoffsets[NUMDESCRIPTORS] = {128,2048,4096,6144}; - - -struct xircom_private { - /* Send and receive buffers, kernel-addressable and dma addressable forms */ - - __le32 *rx_buffer; - __le32 *tx_buffer; - - dma_addr_t rx_dma_handle; - dma_addr_t tx_dma_handle; - - struct sk_buff *tx_skb[4]; - - unsigned long io_port; - int open; - - /* transmit_used is the rotating counter that indicates which transmit - descriptor has to be used next */ - int transmit_used; - - /* Spinlock to serialize register operations. - It must be helt while manipulating the following registers: - CSR0, CSR6, CSR7, CSR9, CSR10, CSR15 - */ - spinlock_t lock; - - struct pci_dev *pdev; - struct net_device *dev; -}; - - -/* Function prototypes */ -static int xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id); -static void xircom_remove(struct pci_dev *pdev); -static irqreturn_t xircom_interrupt(int irq, void *dev_instance); -static netdev_tx_t xircom_start_xmit(struct sk_buff *skb, - struct net_device *dev); -static int xircom_open(struct net_device *dev); -static int xircom_close(struct net_device *dev); -static void xircom_up(struct xircom_private *card); -#ifdef CONFIG_NET_POLL_CONTROLLER -static void xircom_poll_controller(struct net_device *dev); -#endif - -static void investigate_read_descriptor(struct net_device *dev,struct xircom_private *card, int descnr, unsigned int bufferoffset); -static void investigate_write_descriptor(struct net_device *dev, struct xircom_private *card, int descnr, unsigned int bufferoffset); -static void read_mac_address(struct xircom_private *card); -static void transceiver_voodoo(struct xircom_private *card); -static void initialize_card(struct xircom_private *card); -static void trigger_transmit(struct xircom_private *card); -static void trigger_receive(struct xircom_private *card); -static void setup_descriptors(struct xircom_private *card); -static void remove_descriptors(struct xircom_private *card); -static int link_status_changed(struct xircom_private *card); -static void activate_receiver(struct xircom_private *card); -static void deactivate_receiver(struct xircom_private *card); -static void activate_transmitter(struct xircom_private *card); -static void deactivate_transmitter(struct xircom_private *card); -static void enable_transmit_interrupt(struct xircom_private *card); -static void enable_receive_interrupt(struct xircom_private *card); -static void enable_link_interrupt(struct xircom_private *card); -static void disable_all_interrupts(struct xircom_private *card); -static int link_status(struct xircom_private *card); - - - -static DEFINE_PCI_DEVICE_TABLE(xircom_pci_table) = { - {0x115D, 0x0003, PCI_ANY_ID, PCI_ANY_ID,}, - {0,}, -}; -MODULE_DEVICE_TABLE(pci, xircom_pci_table); - -static struct pci_driver xircom_ops = { - .name = "xircom_cb", - .id_table = xircom_pci_table, - .probe = xircom_probe, - .remove = xircom_remove, - .suspend =NULL, - .resume =NULL -}; - - -#ifdef DEBUG -static void print_binary(unsigned int number) -{ - int i,i2; - char buffer[64]; - memset(buffer,0,64); - i2=0; - for (i=31;i>=0;i--) { - if (number & (1<<i)) - buffer[i2++]='1'; - else - buffer[i2++]='0'; - if ((i&3)==0) - buffer[i2++]=' '; - } - printk("%s\n",buffer); -} -#endif - -static const struct net_device_ops netdev_ops = { - .ndo_open = xircom_open, - .ndo_stop = xircom_close, - .ndo_start_xmit = xircom_start_xmit, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = xircom_poll_controller, -#endif -}; - -/* xircom_probe is the code that gets called on device insertion. - it sets up the hardware and registers the device to the networklayer. - - TODO: Send 1 or 2 "dummy" packets here as the card seems to discard the - first two packets that get send, and pump hates that. - - */ -static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id) -{ - struct net_device *dev = NULL; - struct xircom_private *private; - unsigned long flags; - unsigned short tmp16; - enter("xircom_probe"); - - /* First do the PCI initialisation */ - - if (pci_enable_device(pdev)) - return -ENODEV; - - /* disable all powermanagement */ - pci_write_config_dword(pdev, PCI_POWERMGMT, 0x0000); - - pci_set_master(pdev); /* Why isn't this done by pci_enable_device ?*/ - - /* clear PCI status, if any */ - pci_read_config_word (pdev,PCI_STATUS, &tmp16); - pci_write_config_word (pdev, PCI_STATUS,tmp16); - - if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) { - pr_err("%s: failed to allocate io-region\n", __func__); - return -ENODEV; - } - - /* - Before changing the hardware, allocate the memory. - This way, we can fail gracefully if not enough memory - is available. - */ - dev = alloc_etherdev(sizeof(struct xircom_private)); - if (!dev) { - pr_err("%s: failed to allocate etherdev\n", __func__); - goto device_fail; - } - private = netdev_priv(dev); - - /* Allocate the send/receive buffers */ - private->rx_buffer = pci_alloc_consistent(pdev,8192,&private->rx_dma_handle); - if (private->rx_buffer == NULL) { - pr_err("%s: no memory for rx buffer\n", __func__); - goto rx_buf_fail; - } - private->tx_buffer = pci_alloc_consistent(pdev,8192,&private->tx_dma_handle); - if (private->tx_buffer == NULL) { - pr_err("%s: no memory for tx buffer\n", __func__); - goto tx_buf_fail; - } - - SET_NETDEV_DEV(dev, &pdev->dev); - - - private->dev = dev; - private->pdev = pdev; - private->io_port = pci_resource_start(pdev, 0); - spin_lock_init(&private->lock); - dev->irq = pdev->irq; - dev->base_addr = private->io_port; - - initialize_card(private); - read_mac_address(private); - setup_descriptors(private); - - dev->netdev_ops = &netdev_ops; - pci_set_drvdata(pdev, dev); - - if (register_netdev(dev)) { - pr_err("%s: netdevice registration failed\n", __func__); - goto reg_fail; - } - - dev_info(&dev->dev, "Xircom cardbus revision %i at irq %i\n", - pdev->revision, pdev->irq); - /* start the transmitter to get a heartbeat */ - /* TODO: send 2 dummy packets here */ - transceiver_voodoo(private); - - spin_lock_irqsave(&private->lock,flags); - activate_transmitter(private); - activate_receiver(private); - spin_unlock_irqrestore(&private->lock,flags); - - trigger_receive(private); - - leave("xircom_probe"); - return 0; - -reg_fail: - kfree(private->tx_buffer); -tx_buf_fail: - kfree(private->rx_buffer); -rx_buf_fail: - free_netdev(dev); -device_fail: - return -ENODEV; -} - - -/* - xircom_remove is called on module-unload or on device-eject. - it unregisters the irq, io-region and network device. - Interrupts and such are already stopped in the "ifconfig ethX down" - code. - */ -static void __devexit xircom_remove(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct xircom_private *card = netdev_priv(dev); - - enter("xircom_remove"); - pci_free_consistent(pdev,8192,card->rx_buffer,card->rx_dma_handle); - pci_free_consistent(pdev,8192,card->tx_buffer,card->tx_dma_handle); - - release_region(dev->base_addr, 128); - unregister_netdev(dev); - free_netdev(dev); - pci_set_drvdata(pdev, NULL); - leave("xircom_remove"); -} - -static irqreturn_t xircom_interrupt(int irq, void *dev_instance) -{ - struct net_device *dev = (struct net_device *) dev_instance; - struct xircom_private *card = netdev_priv(dev); - unsigned int status; - int i; - - enter("xircom_interrupt\n"); - - spin_lock(&card->lock); - status = inl(card->io_port+CSR5); - -#ifdef DEBUG - print_binary(status); - printk("tx status 0x%08x 0x%08x\n", - card->tx_buffer[0], card->tx_buffer[4]); - printk("rx status 0x%08x 0x%08x\n", - card->rx_buffer[0], card->rx_buffer[4]); -#endif - /* Handle shared irq and hotplug */ - if (status == 0 || status == 0xffffffff) { - spin_unlock(&card->lock); - return IRQ_NONE; - } - - if (link_status_changed(card)) { - int newlink; - printk(KERN_DEBUG "xircom_cb: Link status has changed\n"); - newlink = link_status(card); - dev_info(&dev->dev, "Link is %i mbit\n", newlink); - if (newlink) - netif_carrier_on(dev); - else - netif_carrier_off(dev); - - } - - /* Clear all remaining interrupts */ - status |= 0xffffffff; /* FIXME: make this clear only the - real existing bits */ - outl(status,card->io_port+CSR5); - - - for (i=0;i<NUMDESCRIPTORS;i++) - investigate_write_descriptor(dev,card,i,bufferoffsets[i]); - for (i=0;i<NUMDESCRIPTORS;i++) - investigate_read_descriptor(dev,card,i,bufferoffsets[i]); - - - spin_unlock(&card->lock); - leave("xircom_interrupt"); - return IRQ_HANDLED; -} - -static netdev_tx_t xircom_start_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct xircom_private *card; - unsigned long flags; - int nextdescriptor; - int desc; - enter("xircom_start_xmit"); - - card = netdev_priv(dev); - spin_lock_irqsave(&card->lock,flags); - - /* First see if we can free some descriptors */ - for (desc=0;desc<NUMDESCRIPTORS;desc++) - investigate_write_descriptor(dev,card,desc,bufferoffsets[desc]); - - - nextdescriptor = (card->transmit_used +1) % (NUMDESCRIPTORS); - desc = card->transmit_used; - - /* only send the packet if the descriptor is free */ - if (card->tx_buffer[4*desc]==0) { - /* Copy the packet data; zero the memory first as the card - sometimes sends more than you ask it to. */ - - memset(&card->tx_buffer[bufferoffsets[desc]/4],0,1536); - skb_copy_from_linear_data(skb, - &(card->tx_buffer[bufferoffsets[desc] / 4]), - skb->len); - /* FIXME: The specification tells us that the length we send HAS to be a multiple of - 4 bytes. */ - - card->tx_buffer[4*desc+1] = cpu_to_le32(skb->len); - if (desc == NUMDESCRIPTORS - 1) /* bit 25: last descriptor of the ring */ - card->tx_buffer[4*desc+1] |= cpu_to_le32(1<<25); - - card->tx_buffer[4*desc+1] |= cpu_to_le32(0xF0000000); - /* 0xF0... means want interrupts*/ - card->tx_skb[desc] = skb; - - wmb(); - /* This gives the descriptor to the card */ - card->tx_buffer[4*desc] = cpu_to_le32(0x80000000); - trigger_transmit(card); - if (card->tx_buffer[nextdescriptor*4] & cpu_to_le32(0x8000000)) { - /* next descriptor is occupied... */ - netif_stop_queue(dev); - } - card->transmit_used = nextdescriptor; - leave("xircom-start_xmit - sent"); - spin_unlock_irqrestore(&card->lock,flags); - return NETDEV_TX_OK; - } - - - - /* Uh oh... no free descriptor... drop the packet */ - netif_stop_queue(dev); - spin_unlock_irqrestore(&card->lock,flags); - trigger_transmit(card); - - return NETDEV_TX_BUSY; -} - - - - -static int xircom_open(struct net_device *dev) -{ - struct xircom_private *xp = netdev_priv(dev); - int retval; - enter("xircom_open"); - pr_info("xircom cardbus adaptor found, registering as %s, using irq %i\n", - dev->name, dev->irq); - retval = request_irq(dev->irq, xircom_interrupt, IRQF_SHARED, dev->name, dev); - if (retval) { - leave("xircom_open - No IRQ"); - return retval; - } - - xircom_up(xp); - xp->open = 1; - leave("xircom_open"); - return 0; -} - -static int xircom_close(struct net_device *dev) -{ - struct xircom_private *card; - unsigned long flags; - - enter("xircom_close"); - card = netdev_priv(dev); - netif_stop_queue(dev); /* we don't want new packets */ - - - spin_lock_irqsave(&card->lock,flags); - - disable_all_interrupts(card); -#if 0 - /* We can enable this again once we send dummy packets on ifconfig ethX up */ - deactivate_receiver(card); - deactivate_transmitter(card); -#endif - remove_descriptors(card); - - spin_unlock_irqrestore(&card->lock,flags); - - card->open = 0; - free_irq(dev->irq,dev); - - leave("xircom_close"); - - return 0; - -} - - -#ifdef CONFIG_NET_POLL_CONTROLLER -static void xircom_poll_controller(struct net_device *dev) -{ - disable_irq(dev->irq); - xircom_interrupt(dev->irq, dev); - enable_irq(dev->irq); -} -#endif - - -static void initialize_card(struct xircom_private *card) -{ - unsigned int val; - unsigned long flags; - enter("initialize_card"); - - - spin_lock_irqsave(&card->lock, flags); - - /* First: reset the card */ - val = inl(card->io_port + CSR0); - val |= 0x01; /* Software reset */ - outl(val, card->io_port + CSR0); - - udelay(100); /* give the card some time to reset */ - - val = inl(card->io_port + CSR0); - val &= ~0x01; /* disable Software reset */ - outl(val, card->io_port + CSR0); - - - val = 0; /* Value 0x00 is a safe and conservative value - for the PCI configuration settings */ - outl(val, card->io_port + CSR0); - - - disable_all_interrupts(card); - deactivate_receiver(card); - deactivate_transmitter(card); - - spin_unlock_irqrestore(&card->lock, flags); - - leave("initialize_card"); -} - -/* -trigger_transmit causes the card to check for frames to be transmitted. -This is accomplished by writing to the CSR1 port. The documentation -claims that the act of writing is sufficient and that the value is -ignored; I chose zero. -*/ -static void trigger_transmit(struct xircom_private *card) -{ - unsigned int val; - enter("trigger_transmit"); - - val = 0; - outl(val, card->io_port + CSR1); - - leave("trigger_transmit"); -} - -/* -trigger_receive causes the card to check for empty frames in the -descriptor list in which packets can be received. -This is accomplished by writing to the CSR2 port. The documentation -claims that the act of writing is sufficient and that the value is -ignored; I chose zero. -*/ -static void trigger_receive(struct xircom_private *card) -{ - unsigned int val; - enter("trigger_receive"); - - val = 0; - outl(val, card->io_port + CSR2); - - leave("trigger_receive"); -} - -/* -setup_descriptors initializes the send and receive buffers to be valid -descriptors and programs the addresses into the card. -*/ -static void setup_descriptors(struct xircom_private *card) -{ - u32 address; - int i; - enter("setup_descriptors"); - - - BUG_ON(card->rx_buffer == NULL); - BUG_ON(card->tx_buffer == NULL); - - /* Receive descriptors */ - memset(card->rx_buffer, 0, 128); /* clear the descriptors */ - for (i=0;i<NUMDESCRIPTORS;i++ ) { - - /* Rx Descr0: It's empty, let the card own it, no errors -> 0x80000000 */ - card->rx_buffer[i*4 + 0] = cpu_to_le32(0x80000000); - /* Rx Descr1: buffer 1 is 1536 bytes, buffer 2 is 0 bytes */ - card->rx_buffer[i*4 + 1] = cpu_to_le32(1536); - if (i == NUMDESCRIPTORS - 1) /* bit 25 is "last descriptor" */ - card->rx_buffer[i*4 + 1] |= cpu_to_le32(1 << 25); - - /* Rx Descr2: address of the buffer - we store the buffer at the 2nd half of the page */ - - address = card->rx_dma_handle; - card->rx_buffer[i*4 + 2] = cpu_to_le32(address + bufferoffsets[i]); - /* Rx Desc3: address of 2nd buffer -> 0 */ - card->rx_buffer[i*4 + 3] = 0; - } - - wmb(); - /* Write the receive descriptor ring address to the card */ - address = card->rx_dma_handle; - outl(address, card->io_port + CSR3); /* Receive descr list address */ - - - /* transmit descriptors */ - memset(card->tx_buffer, 0, 128); /* clear the descriptors */ - - for (i=0;i<NUMDESCRIPTORS;i++ ) { - /* Tx Descr0: Empty, we own it, no errors -> 0x00000000 */ - card->tx_buffer[i*4 + 0] = 0x00000000; - /* Tx Descr1: buffer 1 is 1536 bytes, buffer 2 is 0 bytes */ - card->tx_buffer[i*4 + 1] = cpu_to_le32(1536); - if (i == NUMDESCRIPTORS - 1) /* bit 25 is "last descriptor" */ - card->tx_buffer[i*4 + 1] |= cpu_to_le32(1 << 25); - - /* Tx Descr2: address of the buffer - we store the buffer at the 2nd half of the page */ - address = card->tx_dma_handle; - card->tx_buffer[i*4 + 2] = cpu_to_le32(address + bufferoffsets[i]); - /* Tx Desc3: address of 2nd buffer -> 0 */ - card->tx_buffer[i*4 + 3] = 0; - } - - wmb(); - /* wite the transmit descriptor ring to the card */ - address = card->tx_dma_handle; - outl(address, card->io_port + CSR4); /* xmit descr list address */ - - leave("setup_descriptors"); -} - -/* -remove_descriptors informs the card the descriptors are no longer -valid by setting the address in the card to 0x00. -*/ -static void remove_descriptors(struct xircom_private *card) -{ - unsigned int val; - enter("remove_descriptors"); - - val = 0; - outl(val, card->io_port + CSR3); /* Receive descriptor address */ - outl(val, card->io_port + CSR4); /* Send descriptor address */ - - leave("remove_descriptors"); -} - -/* -link_status_changed returns 1 if the card has indicated that -the link status has changed. The new link status has to be read from CSR12. - -This function also clears the status-bit. -*/ -static int link_status_changed(struct xircom_private *card) -{ - unsigned int val; - enter("link_status_changed"); - - val = inl(card->io_port + CSR5); /* Status register */ - - if ((val & (1 << 27)) == 0) { /* no change */ - leave("link_status_changed - nochange"); - return 0; - } - - /* clear the event by writing a 1 to the bit in the - status register. */ - val = (1 << 27); - outl(val, card->io_port + CSR5); - - leave("link_status_changed - changed"); - return 1; -} - - -/* -transmit_active returns 1 if the transmitter on the card is -in a non-stopped state. -*/ -static int transmit_active(struct xircom_private *card) -{ - unsigned int val; - enter("transmit_active"); - - val = inl(card->io_port + CSR5); /* Status register */ - - if ((val & (7 << 20)) == 0) { /* transmitter disabled */ - leave("transmit_active - inactive"); - return 0; - } - - leave("transmit_active - active"); - return 1; -} - -/* -receive_active returns 1 if the receiver on the card is -in a non-stopped state. -*/ -static int receive_active(struct xircom_private *card) -{ - unsigned int val; - enter("receive_active"); - - - val = inl(card->io_port + CSR5); /* Status register */ - - if ((val & (7 << 17)) == 0) { /* receiver disabled */ - leave("receive_active - inactive"); - return 0; - } - - leave("receive_active - active"); - return 1; -} - -/* -activate_receiver enables the receiver on the card. -Before being allowed to active the receiver, the receiver -must be completely de-activated. To achieve this, -this code actually disables the receiver first; then it waits for the -receiver to become inactive, then it activates the receiver and then -it waits for the receiver to be active. - -must be called with the lock held and interrupts disabled. -*/ -static void activate_receiver(struct xircom_private *card) -{ - unsigned int val; - int counter; - enter("activate_receiver"); - - - val = inl(card->io_port + CSR6); /* Operation mode */ - - /* If the "active" bit is set and the receiver is already - active, no need to do the expensive thing */ - if ((val&2) && (receive_active(card))) - return; - - - val = val & ~2; /* disable the receiver */ - outl(val, card->io_port + CSR6); - - counter = 10; - while (counter > 0) { - if (!receive_active(card)) - break; - /* wait a while */ - udelay(50); - counter--; - if (counter <= 0) - pr_err("Receiver failed to deactivate\n"); - } - - /* enable the receiver */ - val = inl(card->io_port + CSR6); /* Operation mode */ - val = val | 2; /* enable the receiver */ - outl(val, card->io_port + CSR6); - - /* now wait for the card to activate again */ - counter = 10; - while (counter > 0) { - if (receive_active(card)) - break; - /* wait a while */ - udelay(50); - counter--; - if (counter <= 0) - pr_err("Receiver failed to re-activate\n"); - } - - leave("activate_receiver"); -} - -/* -deactivate_receiver disables the receiver on the card. -To achieve this this code disables the receiver first; -then it waits for the receiver to become inactive. - -must be called with the lock held and interrupts disabled. -*/ -static void deactivate_receiver(struct xircom_private *card) -{ - unsigned int val; - int counter; - enter("deactivate_receiver"); - - val = inl(card->io_port + CSR6); /* Operation mode */ - val = val & ~2; /* disable the receiver */ - outl(val, card->io_port + CSR6); - - counter = 10; - while (counter > 0) { - if (!receive_active(card)) - break; - /* wait a while */ - udelay(50); - counter--; - if (counter <= 0) - pr_err("Receiver failed to deactivate\n"); - } - - - leave("deactivate_receiver"); -} - - -/* -activate_transmitter enables the transmitter on the card. -Before being allowed to active the transmitter, the transmitter -must be completely de-activated. To achieve this, -this code actually disables the transmitter first; then it waits for the -transmitter to become inactive, then it activates the transmitter and then -it waits for the transmitter to be active again. - -must be called with the lock held and interrupts disabled. -*/ -static void activate_transmitter(struct xircom_private *card) -{ - unsigned int val; - int counter; - enter("activate_transmitter"); - - - val = inl(card->io_port + CSR6); /* Operation mode */ - - /* If the "active" bit is set and the receiver is already - active, no need to do the expensive thing */ - if ((val&(1<<13)) && (transmit_active(card))) - return; - - val = val & ~(1 << 13); /* disable the transmitter */ - outl(val, card->io_port + CSR6); - - counter = 10; - while (counter > 0) { - if (!transmit_active(card)) - break; - /* wait a while */ - udelay(50); - counter--; - if (counter <= 0) - pr_err("Transmitter failed to deactivate\n"); - } - - /* enable the transmitter */ - val = inl(card->io_port + CSR6); /* Operation mode */ - val = val | (1 << 13); /* enable the transmitter */ - outl(val, card->io_port + CSR6); - - /* now wait for the card to activate again */ - counter = 10; - while (counter > 0) { - if (transmit_active(card)) - break; - /* wait a while */ - udelay(50); - counter--; - if (counter <= 0) - pr_err("Transmitter failed to re-activate\n"); - } - - leave("activate_transmitter"); -} - -/* -deactivate_transmitter disables the transmitter on the card. -To achieve this this code disables the transmitter first; -then it waits for the transmitter to become inactive. - -must be called with the lock held and interrupts disabled. -*/ -static void deactivate_transmitter(struct xircom_private *card) -{ - unsigned int val; - int counter; - enter("deactivate_transmitter"); - - val = inl(card->io_port + CSR6); /* Operation mode */ - val = val & ~2; /* disable the transmitter */ - outl(val, card->io_port + CSR6); - - counter = 20; - while (counter > 0) { - if (!transmit_active(card)) - break; - /* wait a while */ - udelay(50); - counter--; - if (counter <= 0) - pr_err("Transmitter failed to deactivate\n"); - } - - - leave("deactivate_transmitter"); -} - - -/* -enable_transmit_interrupt enables the transmit interrupt - -must be called with the lock held and interrupts disabled. -*/ -static void enable_transmit_interrupt(struct xircom_private *card) -{ - unsigned int val; - enter("enable_transmit_interrupt"); - - val = inl(card->io_port + CSR7); /* Interrupt enable register */ - val |= 1; /* enable the transmit interrupt */ - outl(val, card->io_port + CSR7); - - leave("enable_transmit_interrupt"); -} - - -/* -enable_receive_interrupt enables the receive interrupt - -must be called with the lock held and interrupts disabled. -*/ -static void enable_receive_interrupt(struct xircom_private *card) -{ - unsigned int val; - enter("enable_receive_interrupt"); - - val = inl(card->io_port + CSR7); /* Interrupt enable register */ - val = val | (1 << 6); /* enable the receive interrupt */ - outl(val, card->io_port + CSR7); - - leave("enable_receive_interrupt"); -} - -/* -enable_link_interrupt enables the link status change interrupt - -must be called with the lock held and interrupts disabled. -*/ -static void enable_link_interrupt(struct xircom_private *card) -{ - unsigned int val; - enter("enable_link_interrupt"); - - val = inl(card->io_port + CSR7); /* Interrupt enable register */ - val = val | (1 << 27); /* enable the link status chage interrupt */ - outl(val, card->io_port + CSR7); - - leave("enable_link_interrupt"); -} - - - -/* -disable_all_interrupts disables all interrupts - -must be called with the lock held and interrupts disabled. -*/ -static void disable_all_interrupts(struct xircom_private *card) -{ - unsigned int val; - enter("enable_all_interrupts"); - - val = 0; /* disable all interrupts */ - outl(val, card->io_port + CSR7); - - leave("disable_all_interrupts"); -} - -/* -enable_common_interrupts enables several weird interrupts - -must be called with the lock held and interrupts disabled. -*/ -static void enable_common_interrupts(struct xircom_private *card) -{ - unsigned int val; - enter("enable_link_interrupt"); - - val = inl(card->io_port + CSR7); /* Interrupt enable register */ - val |= (1<<16); /* Normal Interrupt Summary */ - val |= (1<<15); /* Abnormal Interrupt Summary */ - val |= (1<<13); /* Fatal bus error */ - val |= (1<<8); /* Receive Process Stopped */ - val |= (1<<7); /* Receive Buffer Unavailable */ - val |= (1<<5); /* Transmit Underflow */ - val |= (1<<2); /* Transmit Buffer Unavailable */ - val |= (1<<1); /* Transmit Process Stopped */ - outl(val, card->io_port + CSR7); - - leave("enable_link_interrupt"); -} - -/* -enable_promisc starts promisc mode - -must be called with the lock held and interrupts disabled. -*/ -static int enable_promisc(struct xircom_private *card) -{ - unsigned int val; - enter("enable_promisc"); - - val = inl(card->io_port + CSR6); - val = val | (1 << 6); - outl(val, card->io_port + CSR6); - - leave("enable_promisc"); - return 1; -} - - - - -/* -link_status() checks the links status and will return 0 for no link, 10 for 10mbit link and 100 for.. guess what. - -Must be called in locked state with interrupts disabled -*/ -static int link_status(struct xircom_private *card) -{ - unsigned int val; - enter("link_status"); - - val = inb(card->io_port + CSR12); - - if (!(val&(1<<2))) /* bit 2 is 0 for 10mbit link, 1 for not an 10mbit link */ - return 10; - if (!(val&(1<<1))) /* bit 1 is 0 for 100mbit link, 1 for not an 100mbit link */ - return 100; - - /* If we get here -> no link at all */ - - leave("link_status"); - return 0; -} - - - - - -/* - read_mac_address() reads the MAC address from the NIC and stores it in the "dev" structure. - - This function will take the spinlock itself and can, as a result, not be called with the lock helt. - */ -static void read_mac_address(struct xircom_private *card) -{ - unsigned char j, tuple, link, data_id, data_count; - unsigned long flags; - int i; - - enter("read_mac_address"); - - spin_lock_irqsave(&card->lock, flags); - - outl(1 << 12, card->io_port + CSR9); /* enable boot rom access */ - for (i = 0x100; i < 0x1f7; i += link + 2) { - outl(i, card->io_port + CSR10); - tuple = inl(card->io_port + CSR9) & 0xff; - outl(i + 1, card->io_port + CSR10); - link = inl(card->io_port + CSR9) & 0xff; - outl(i + 2, card->io_port + CSR10); - data_id = inl(card->io_port + CSR9) & 0xff; - outl(i + 3, card->io_port + CSR10); - data_count = inl(card->io_port + CSR9) & 0xff; - if ((tuple == 0x22) && (data_id == 0x04) && (data_count == 0x06)) { - /* - * This is it. We have the data we want. - */ - for (j = 0; j < 6; j++) { - outl(i + j + 4, card->io_port + CSR10); - card->dev->dev_addr[j] = inl(card->io_port + CSR9) & 0xff; - } - break; - } else if (link == 0) { - break; - } - } - spin_unlock_irqrestore(&card->lock, flags); - pr_debug(" %pM\n", card->dev->dev_addr); - leave("read_mac_address"); -} - - -/* - transceiver_voodoo() enables the external UTP plug thingy. - it's called voodoo as I stole this code and cannot cross-reference - it with the specification. - */ -static void transceiver_voodoo(struct xircom_private *card) -{ - unsigned long flags; - - enter("transceiver_voodoo"); - - /* disable all powermanagement */ - pci_write_config_dword(card->pdev, PCI_POWERMGMT, 0x0000); - - setup_descriptors(card); - - spin_lock_irqsave(&card->lock, flags); - - outl(0x0008, card->io_port + CSR15); - udelay(25); - outl(0xa8050000, card->io_port + CSR15); - udelay(25); - outl(0xa00f0000, card->io_port + CSR15); - udelay(25); - - spin_unlock_irqrestore(&card->lock, flags); - - netif_start_queue(card->dev); - leave("transceiver_voodoo"); -} - - -static void xircom_up(struct xircom_private *card) -{ - unsigned long flags; - int i; - - enter("xircom_up"); - - /* disable all powermanagement */ - pci_write_config_dword(card->pdev, PCI_POWERMGMT, 0x0000); - - setup_descriptors(card); - - spin_lock_irqsave(&card->lock, flags); - - - enable_link_interrupt(card); - enable_transmit_interrupt(card); - enable_receive_interrupt(card); - enable_common_interrupts(card); - enable_promisc(card); - - /* The card can have received packets already, read them away now */ - for (i=0;i<NUMDESCRIPTORS;i++) - investigate_read_descriptor(card->dev,card,i,bufferoffsets[i]); - - - spin_unlock_irqrestore(&card->lock, flags); - trigger_receive(card); - trigger_transmit(card); - netif_start_queue(card->dev); - leave("xircom_up"); -} - -/* Bufferoffset is in BYTES */ -static void investigate_read_descriptor(struct net_device *dev,struct xircom_private *card, int descnr, unsigned int bufferoffset) -{ - int status; - - enter("investigate_read_descriptor"); - status = le32_to_cpu(card->rx_buffer[4*descnr]); - - if ((status > 0)) { /* packet received */ - - /* TODO: discard error packets */ - - short pkt_len = ((status >> 16) & 0x7ff) - 4; /* minus 4, we don't want the CRC */ - struct sk_buff *skb; - - if (pkt_len > 1518) { - pr_err("Packet length %i is bogus\n", pkt_len); - pkt_len = 1518; - } - - skb = dev_alloc_skb(pkt_len + 2); - if (skb == NULL) { - dev->stats.rx_dropped++; - goto out; - } - skb_reserve(skb, 2); - skb_copy_to_linear_data(skb, (unsigned char*)&card->rx_buffer[bufferoffset / 4], pkt_len); - skb_put(skb, pkt_len); - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - - out: - /* give the buffer back to the card */ - card->rx_buffer[4*descnr] = cpu_to_le32(0x80000000); - trigger_receive(card); - } - - leave("investigate_read_descriptor"); - -} - - -/* Bufferoffset is in BYTES */ -static void investigate_write_descriptor(struct net_device *dev, struct xircom_private *card, int descnr, unsigned int bufferoffset) -{ - int status; - - enter("investigate_write_descriptor"); - - status = le32_to_cpu(card->tx_buffer[4*descnr]); -#if 0 - if (status & 0x8000) { /* Major error */ - pr_err("Major transmit error status %x\n", status); - card->tx_buffer[4*descnr] = 0; - netif_wake_queue (dev); - } -#endif - if (status > 0) { /* bit 31 is 0 when done */ - if (card->tx_skb[descnr]!=NULL) { - dev->stats.tx_bytes += card->tx_skb[descnr]->len; - dev_kfree_skb_irq(card->tx_skb[descnr]); - } - card->tx_skb[descnr] = NULL; - /* Bit 8 in the status field is 1 if there was a collision */ - if (status&(1<<8)) - dev->stats.collisions++; - card->tx_buffer[4*descnr] = 0; /* descriptor is free again */ - netif_wake_queue (dev); - dev->stats.tx_packets++; - } - - leave("investigate_write_descriptor"); - -} - - -static int __init xircom_init(void) -{ - return pci_register_driver(&xircom_ops); -} - -static void __exit xircom_exit(void) -{ - pci_unregister_driver(&xircom_ops); -} - -module_init(xircom_init) -module_exit(xircom_exit) - |