diff options
Diffstat (limited to 'drivers/net/tokenring/olympic.c')
| -rw-r--r-- | drivers/net/tokenring/olympic.c | 1751 |
1 files changed, 0 insertions, 1751 deletions
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c deleted file mode 100644 index 3d2fbe60b46..00000000000 --- a/drivers/net/tokenring/olympic.c +++ /dev/null @@ -1,1751 +0,0 @@ -/* - * olympic.c (c) 1999 Peter De Schrijver All Rights Reserved - * 1999/2000 Mike Phillips (mikep@linuxtr.net) - * - * Linux driver for IBM PCI tokenring cards based on the Pit/Pit-Phy/Olympic - * chipset. - * - * Base Driver Skeleton: - * Written 1993-94 by Donald Becker. - * - * Copyright 1993 United States Government as represented by the - * Director, National Security Agency. - * - * Thanks to Erik De Cock, Adrian Bridgett and Frank Fiene for their - * assistance and perserverance with the testing of this driver. - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * 4/27/99 - Alpha Release 0.1.0 - * First release to the public - * - * 6/8/99 - Official Release 0.2.0 - * Merged into the kernel code - * 8/18/99 - Updated driver for 2.3.13 kernel to use new pci - * resource. Driver also reports the card name returned by - * the pci resource. - * 1/11/00 - Added spinlocks for smp - * 2/23/00 - Updated to dev_kfree_irq - * 3/10/00 - Fixed FDX enable which triggered other bugs also - * squashed. - * 5/20/00 - Changes to handle Olympic on LinuxPPC. Endian changes. - * The odd thing about the changes is that the fix for - * endian issues with the big-endian data in the arb, asb... - * was to always swab() the bytes, no matter what CPU. - * That's because the read[wl]() functions always swap the - * bytes on the way in on PPC. - * Fixing the hardware descriptors was another matter, - * because they weren't going through read[wl](), there all - * the results had to be in memory in le32 values. kdaaker - * - * 12/23/00 - Added minimal Cardbus support (Thanks Donald). - * - * 03/09/01 - Add new pci api, dev_base_lock, general clean up. - * - * 03/27/01 - Add new dma pci (Thanks to Kyle Lucke) and alloc_trdev - * Change proc_fs behaviour, now one entry per adapter. - * - * 04/09/01 - Couple of bug fixes to the dma unmaps and ejecting the - * adapter when live does not take the system down with it. - * - * 06/02/01 - Clean up, copy skb for small packets - * - * 06/22/01 - Add EISR error handling routines - * - * 07/19/01 - Improve bad LAA reporting, strip out freemem - * into a separate function, its called from 3 - * different places now. - * 02/09/02 - Replaced sleep_on. - * 03/01/02 - Replace access to several registers from 32 bit to - * 16 bit. Fixes alignment errors on PPC 64 bit machines. - * Thanks to Al Trautman for this one. - * 03/10/02 - Fix BUG in arb_cmd. Bug was there all along but was - * silently ignored until the error checking code - * went into version 1.0.0 - * 06/04/02 - Add correct start up sequence for the cardbus adapters. - * Required for strict compliance with pci power mgmt specs. - * To Do: - * - * Wake on lan - * - * If Problems do Occur - * Most problems can be rectified by either closing and opening the interface - * (ifconfig down and up) or rmmod and insmod'ing the driver (a bit difficult - * if compiled into the kernel). - */ - -/* Change OLYMPIC_DEBUG to 1 to get verbose, and I mean really verbose, messages */ - -#define OLYMPIC_DEBUG 0 - - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/timer.h> -#include <linux/in.h> -#include <linux/ioport.h> -#include <linux/string.h> -#include <linux/proc_fs.h> -#include <linux/ptrace.h> -#include <linux/skbuff.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/trdevice.h> -#include <linux/stddef.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/spinlock.h> -#include <linux/bitops.h> -#include <linux/jiffies.h> - -#include <net/checksum.h> -#include <net/net_namespace.h> - -#include <asm/io.h> -#include <asm/system.h> - -#include "olympic.h" - -/* I've got to put some intelligence into the version number so that Peter and I know - * which version of the code somebody has got. - * Version Number = a.b.c.d where a.b.c is the level of code and d is the latest author. - * So 0.0.1.pds = Peter, 0.0.1.mlp = Mike - * - * Official releases will only have an a.b.c version number format. - */ - -static char version[] = -"Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips" ; - -static char *open_maj_error[] = {"No error", "Lobe Media Test", "Physical Insertion", - "Address Verification", "Neighbor Notification (Ring Poll)", - "Request Parameters","FDX Registration Request", - "FDX Duplicate Address Check", "Station registration Query Wait", - "Unknown stage"}; - -static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost", "Wire Fault", - "Ring Speed Mismatch", "Timeout","Ring Failure","Ring Beaconing", - "Duplicate Node Address","Request Parameters","Remove Received", - "Reserved", "Reserved", "No Monitor Detected for RPL", - "Monitor Contention failer for RPL", "FDX Protocol Error"}; - -/* Module parameters */ - -MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ; -MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ; - -/* Ring Speed 0,4,16,100 - * 0 = Autosense - * 4,16 = Selected speed only, no autosense - * This allows the card to be the first on the ring - * and become the active monitor. - * 100 = Nothing at present, 100mbps is autodetected - * if FDX is turned on. May be implemented in the future to - * fail if 100mpbs is not detected. - * - * WARNING: Some hubs will allow you to insert - * at the wrong speed - */ - -static int ringspeed[OLYMPIC_MAX_ADAPTERS] = {0,} ; -module_param_array(ringspeed, int, NULL, 0); - -/* Packet buffer size */ - -static int pkt_buf_sz[OLYMPIC_MAX_ADAPTERS] = {0,} ; -module_param_array(pkt_buf_sz, int, NULL, 0) ; - -/* Message Level */ - -static int message_level[OLYMPIC_MAX_ADAPTERS] = {0,} ; -module_param_array(message_level, int, NULL, 0) ; - -/* Change network_monitor to receive mac frames through the arb channel. - * Will also create a /proc/net/olympic_tr%d entry, where %d is the tr - * device, i.e. tr0, tr1 etc. - * Intended to be used to create a ring-error reporting network module - * i.e. it will give you the source address of beaconers on the ring - */ -static int network_monitor[OLYMPIC_MAX_ADAPTERS] = {0,}; -module_param_array(network_monitor, int, NULL, 0); - -static DEFINE_PCI_DEVICE_TABLE(olympic_pci_tbl) = { - {PCI_VENDOR_ID_IBM,PCI_DEVICE_ID_IBM_TR_WAKE,PCI_ANY_ID,PCI_ANY_ID,}, - { } /* Terminating Entry */ -}; -MODULE_DEVICE_TABLE(pci,olympic_pci_tbl) ; - - -static int olympic_probe(struct pci_dev *pdev, const struct pci_device_id *ent); -static int olympic_init(struct net_device *dev); -static int olympic_open(struct net_device *dev); -static netdev_tx_t olympic_xmit(struct sk_buff *skb, - struct net_device *dev); -static int olympic_close(struct net_device *dev); -static void olympic_set_rx_mode(struct net_device *dev); -static void olympic_freemem(struct net_device *dev) ; -static irqreturn_t olympic_interrupt(int irq, void *dev_id); -static int olympic_set_mac_address(struct net_device *dev, void *addr) ; -static void olympic_arb_cmd(struct net_device *dev); -static int olympic_change_mtu(struct net_device *dev, int mtu); -static void olympic_srb_bh(struct net_device *dev) ; -static void olympic_asb_bh(struct net_device *dev) ; -static int olympic_proc_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data) ; - -static const struct net_device_ops olympic_netdev_ops = { - .ndo_open = olympic_open, - .ndo_stop = olympic_close, - .ndo_start_xmit = olympic_xmit, - .ndo_change_mtu = olympic_change_mtu, - .ndo_set_multicast_list = olympic_set_rx_mode, - .ndo_set_mac_address = olympic_set_mac_address, -}; - -static int __devinit olympic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - struct net_device *dev ; - struct olympic_private *olympic_priv; - static int card_no = -1 ; - int i ; - - card_no++ ; - - if ((i = pci_enable_device(pdev))) { - return i ; - } - - pci_set_master(pdev); - - if ((i = pci_request_regions(pdev,"olympic"))) { - goto op_disable_dev; - } - - dev = alloc_trdev(sizeof(struct olympic_private)) ; - if (!dev) { - i = -ENOMEM; - goto op_release_dev; - } - - olympic_priv = netdev_priv(dev) ; - - spin_lock_init(&olympic_priv->olympic_lock) ; - - init_waitqueue_head(&olympic_priv->srb_wait); - init_waitqueue_head(&olympic_priv->trb_wait); -#if OLYMPIC_DEBUG - printk(KERN_INFO "pci_device: %p, dev:%p, dev->priv: %p\n", pdev, dev, netdev_priv(dev)); -#endif - dev->irq=pdev->irq; - dev->base_addr=pci_resource_start(pdev, 0); - olympic_priv->olympic_card_name = pci_name(pdev); - olympic_priv->pdev = pdev; - olympic_priv->olympic_mmio = ioremap(pci_resource_start(pdev,1),256); - olympic_priv->olympic_lap = ioremap(pci_resource_start(pdev,2),2048); - if (!olympic_priv->olympic_mmio || !olympic_priv->olympic_lap) { - goto op_free_iomap; - } - - if ((pkt_buf_sz[card_no] < 100) || (pkt_buf_sz[card_no] > 18000) ) - olympic_priv->pkt_buf_sz = PKT_BUF_SZ ; - else - olympic_priv->pkt_buf_sz = pkt_buf_sz[card_no] ; - - dev->mtu = olympic_priv->pkt_buf_sz - TR_HLEN ; - olympic_priv->olympic_ring_speed = ringspeed[card_no] ; - olympic_priv->olympic_message_level = message_level[card_no] ; - olympic_priv->olympic_network_monitor = network_monitor[card_no]; - - if ((i = olympic_init(dev))) { - goto op_free_iomap; - } - - dev->netdev_ops = &olympic_netdev_ops; - SET_NETDEV_DEV(dev, &pdev->dev); - - pci_set_drvdata(pdev,dev) ; - register_netdev(dev) ; - printk("Olympic: %s registered as: %s\n",olympic_priv->olympic_card_name,dev->name); - if (olympic_priv->olympic_network_monitor) { /* Must go after register_netdev as we need the device name */ - char proc_name[20] ; - strcpy(proc_name,"olympic_") ; - strcat(proc_name,dev->name) ; - create_proc_read_entry(proc_name,0,init_net.proc_net,olympic_proc_info,(void *)dev) ; - printk("Olympic: Network Monitor information: /proc/%s\n",proc_name); - } - return 0 ; - -op_free_iomap: - if (olympic_priv->olympic_mmio) - iounmap(olympic_priv->olympic_mmio); - if (olympic_priv->olympic_lap) - iounmap(olympic_priv->olympic_lap); - - free_netdev(dev); -op_release_dev: - pci_release_regions(pdev); - -op_disable_dev: - pci_disable_device(pdev); - return i; -} - -static int olympic_init(struct net_device *dev) -{ - struct olympic_private *olympic_priv; - u8 __iomem *olympic_mmio, *init_srb,*adapter_addr; - unsigned long t; - unsigned int uaa_addr; - - olympic_priv=netdev_priv(dev); - olympic_mmio=olympic_priv->olympic_mmio; - - printk("%s\n", version); - printk("%s. I/O at %hx, MMIO at %p, LAP at %p, using irq %d\n", olympic_priv->olympic_card_name, (unsigned int) dev->base_addr,olympic_priv->olympic_mmio, olympic_priv->olympic_lap, dev->irq); - - writel(readl(olympic_mmio+BCTL) | BCTL_SOFTRESET,olympic_mmio+BCTL); - t=jiffies; - while((readl(olympic_mmio+BCTL)) & BCTL_SOFTRESET) { - schedule(); - if(time_after(jiffies, t + 40*HZ)) { - printk(KERN_ERR "IBM PCI tokenring card not responding.\n"); - return -ENODEV; - } - } - - - /* Needed for cardbus */ - if(!(readl(olympic_mmio+BCTL) & BCTL_MODE_INDICATOR)) { - writel(readl(olympic_priv->olympic_mmio+FERMASK)|FERMASK_INT_BIT, olympic_mmio+FERMASK); - } - -#if OLYMPIC_DEBUG - printk("BCTL: %x\n",readl(olympic_mmio+BCTL)); - printk("GPR: %x\n",readw(olympic_mmio+GPR)); - printk("SISRMASK: %x\n",readl(olympic_mmio+SISR_MASK)); -#endif - /* Aaaahhh, You have got to be real careful setting GPR, the card - holds the previous values from flash memory, including autosense - and ring speed */ - - writel(readl(olympic_mmio+BCTL)|BCTL_MIMREB,olympic_mmio+BCTL); - - if (olympic_priv->olympic_ring_speed == 0) { /* Autosense */ - writew(readw(olympic_mmio+GPR)|GPR_AUTOSENSE,olympic_mmio+GPR); - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Ringspeed autosense mode on\n",olympic_priv->olympic_card_name); - } else if (olympic_priv->olympic_ring_speed == 16) { - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Trying to open at 16 Mbps as requested\n", olympic_priv->olympic_card_name); - writew(GPR_16MBPS, olympic_mmio+GPR); - } else if (olympic_priv->olympic_ring_speed == 4) { - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Trying to open at 4 Mbps as requested\n", olympic_priv->olympic_card_name) ; - writew(0, olympic_mmio+GPR); - } - - writew(readw(olympic_mmio+GPR)|GPR_NEPTUNE_BF,olympic_mmio+GPR); - -#if OLYMPIC_DEBUG - printk("GPR = %x\n",readw(olympic_mmio + GPR) ) ; -#endif - /* Solo has been paused to meet the Cardbus power - * specs if the adapter is cardbus. Check to - * see its been paused and then restart solo. The - * adapter should set the pause bit within 1 second. - */ - - if(!(readl(olympic_mmio+BCTL) & BCTL_MODE_INDICATOR)) { - t=jiffies; - while (!(readl(olympic_mmio+CLKCTL) & CLKCTL_PAUSE)) { - schedule() ; - if(time_after(jiffies, t + 2*HZ)) { - printk(KERN_ERR "IBM Cardbus tokenring adapter not responsing.\n") ; - return -ENODEV; - } - } - writel(readl(olympic_mmio+CLKCTL) & ~CLKCTL_PAUSE, olympic_mmio+CLKCTL) ; - } - - /* start solo init */ - writel((1<<15),olympic_mmio+SISR_MASK_SUM); - - t=jiffies; - while(!((readl(olympic_mmio+SISR_RR)) & SISR_SRB_REPLY)) { - schedule(); - if(time_after(jiffies, t + 15*HZ)) { - printk(KERN_ERR "IBM PCI tokenring card not responding.\n"); - return -ENODEV; - } - } - - writel(readw(olympic_mmio+LAPWWO),olympic_mmio+LAPA); - -#if OLYMPIC_DEBUG - printk("LAPWWO: %x, LAPA: %x\n",readl(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA)); -#endif - - init_srb=olympic_priv->olympic_lap + ((readw(olympic_mmio+LAPWWO)) & (~0xf800)); - -#if OLYMPIC_DEBUG -{ - int i; - printk("init_srb(%p): ",init_srb); - for(i=0;i<20;i++) - printk("%x ",readb(init_srb+i)); - printk("\n"); -} -#endif - if(readw(init_srb+6)) { - printk(KERN_INFO "tokenring card initialization failed. errorcode : %x\n",readw(init_srb+6)); - return -ENODEV; - } - - if (olympic_priv->olympic_message_level) { - if ( readb(init_srb +2) & 0x40) { - printk(KERN_INFO "Olympic: Adapter is FDX capable.\n") ; - } else { - printk(KERN_INFO "Olympic: Adapter cannot do FDX.\n"); - } - } - - uaa_addr=swab16(readw(init_srb+8)); - -#if OLYMPIC_DEBUG - printk("UAA resides at %x\n",uaa_addr); -#endif - - writel(uaa_addr,olympic_mmio+LAPA); - adapter_addr=olympic_priv->olympic_lap + (uaa_addr & (~0xf800)); - - memcpy_fromio(&dev->dev_addr[0], adapter_addr,6); - -#if OLYMPIC_DEBUG - printk("adapter address: %pM\n", dev->dev_addr); -#endif - - olympic_priv->olympic_addr_table_addr = swab16(readw(init_srb + 12)); - olympic_priv->olympic_parms_addr = swab16(readw(init_srb + 14)); - - return 0; - -} - -static int olympic_open(struct net_device *dev) -{ - struct olympic_private *olympic_priv=netdev_priv(dev); - u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*init_srb; - unsigned long flags, t; - int i, open_finished = 1 ; - u8 resp, err; - - DECLARE_WAITQUEUE(wait,current) ; - - olympic_init(dev); - - if (request_irq(dev->irq, olympic_interrupt, IRQF_SHARED , "olympic", - dev)) - return -EAGAIN; - -#if OLYMPIC_DEBUG - printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM)); - printk("pending ints: %x\n",readl(olympic_mmio+SISR_RR)); -#endif - - writel(SISR_MI,olympic_mmio+SISR_MASK_SUM); - - writel(SISR_MI | SISR_SRB_REPLY, olympic_mmio+SISR_MASK); /* more ints later, doesn't stop arb cmd interrupt */ - - writel(LISR_LIE,olympic_mmio+LISR); /* more ints later */ - - /* adapter is closed, so SRB is pointed to by LAPWWO */ - - writel(readw(olympic_mmio+LAPWWO),olympic_mmio+LAPA); - init_srb=olympic_priv->olympic_lap + ((readw(olympic_mmio+LAPWWO)) & (~0xf800)); - -#if OLYMPIC_DEBUG - printk("LAPWWO: %x, LAPA: %x\n",readw(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA)); - printk("SISR Mask = %04x\n", readl(olympic_mmio+SISR_MASK)); - printk("Before the open command\n"); -#endif - do { - memset_io(init_srb,0,SRB_COMMAND_SIZE); - - writeb(SRB_OPEN_ADAPTER,init_srb) ; /* open */ - writeb(OLYMPIC_CLEAR_RET_CODE,init_srb+2); - - /* If Network Monitor, instruct card to copy MAC frames through the ARB */ - if (olympic_priv->olympic_network_monitor) - writew(swab16(OPEN_ADAPTER_ENABLE_FDX | OPEN_ADAPTER_PASS_ADC_MAC | OPEN_ADAPTER_PASS_ATT_MAC | OPEN_ADAPTER_PASS_BEACON), init_srb+8); - else - writew(swab16(OPEN_ADAPTER_ENABLE_FDX), init_srb+8); - - /* Test OR of first 3 bytes as its totally possible for - * someone to set the first 2 bytes to be zero, although this - * is an error, the first byte must have bit 6 set to 1 */ - - if (olympic_priv->olympic_laa[0] | olympic_priv->olympic_laa[1] | olympic_priv->olympic_laa[2]) { - writeb(olympic_priv->olympic_laa[0],init_srb+12); - writeb(olympic_priv->olympic_laa[1],init_srb+13); - writeb(olympic_priv->olympic_laa[2],init_srb+14); - writeb(olympic_priv->olympic_laa[3],init_srb+15); - writeb(olympic_priv->olympic_laa[4],init_srb+16); - writeb(olympic_priv->olympic_laa[5],init_srb+17); - memcpy(dev->dev_addr,olympic_priv->olympic_laa,dev->addr_len) ; - } - writeb(1,init_srb+30); - - spin_lock_irqsave(&olympic_priv->olympic_lock,flags); - olympic_priv->srb_queued=1; - - writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); - spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); - - t = jiffies ; - - add_wait_queue(&olympic_priv->srb_wait,&wait) ; - set_current_state(TASK_INTERRUPTIBLE) ; - - while(olympic_priv->srb_queued) { - schedule() ; - if(signal_pending(current)) { - printk(KERN_WARNING "%s: Signal received in open.\n", - dev->name); - printk(KERN_WARNING "SISR=%x LISR=%x\n", - readl(olympic_mmio+SISR), - readl(olympic_mmio+LISR)); - olympic_priv->srb_queued=0; - break; - } - if (time_after(jiffies, t + 10*HZ)) { - printk(KERN_WARNING "%s: SRB timed out.\n",dev->name); - olympic_priv->srb_queued=0; - break ; - } - set_current_state(TASK_INTERRUPTIBLE) ; - } - remove_wait_queue(&olympic_priv->srb_wait,&wait) ; - set_current_state(TASK_RUNNING) ; - olympic_priv->srb_queued = 0 ; -#if OLYMPIC_DEBUG - printk("init_srb(%p): ",init_srb); - for(i=0;i<20;i++) - printk("%02x ",readb(init_srb+i)); - printk("\n"); -#endif - - /* If we get the same return response as we set, the interrupt wasn't raised and the open - * timed out. - */ - - switch (resp = readb(init_srb+2)) { - case OLYMPIC_CLEAR_RET_CODE: - printk(KERN_WARNING "%s: Adapter Open time out or error.\n", dev->name) ; - goto out; - case 0: - open_finished = 1; - break; - case 0x07: - if (!olympic_priv->olympic_ring_speed && open_finished) { /* Autosense , first time around */ - printk(KERN_WARNING "%s: Retrying at different ring speed\n", dev->name); - open_finished = 0 ; - continue; - } - - err = readb(init_srb+7); - - if (!olympic_priv->olympic_ring_speed && ((err & 0x0f) == 0x0d)) { - printk(KERN_WARNING "%s: Tried to autosense ring speed with no monitors present\n",dev->name); - printk(KERN_WARNING "%s: Please try again with a specified ring speed\n",dev->name); - } else { - printk(KERN_WARNING "%s: %s - %s\n", dev->name, - open_maj_error[(err & 0xf0) >> 4], - open_min_error[(err & 0x0f)]); - } - goto out; - - case 0x32: - printk(KERN_WARNING "%s: Invalid LAA: %pM\n", - dev->name, olympic_priv->olympic_laa); - goto out; - - default: - printk(KERN_WARNING "%s: Bad OPEN response: %x\n", dev->name, resp); - goto out; - - } - } while (!(open_finished)) ; /* Will only loop if ring speed mismatch re-open attempted && autosense is on */ - - if (readb(init_srb+18) & (1<<3)) - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Opened in FDX Mode\n",dev->name); - - if (readb(init_srb+18) & (1<<1)) - olympic_priv->olympic_ring_speed = 100 ; - else if (readb(init_srb+18) & 1) - olympic_priv->olympic_ring_speed = 16 ; - else - olympic_priv->olympic_ring_speed = 4 ; - - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Opened in %d Mbps mode\n",dev->name, olympic_priv->olympic_ring_speed); - - olympic_priv->asb = swab16(readw(init_srb+8)); - olympic_priv->srb = swab16(readw(init_srb+10)); - olympic_priv->arb = swab16(readw(init_srb+12)); - olympic_priv->trb = swab16(readw(init_srb+16)); - - olympic_priv->olympic_receive_options = 0x01 ; - olympic_priv->olympic_copy_all_options = 0 ; - - /* setup rx ring */ - - writel((3<<16),olympic_mmio+BMCTL_RWM); /* Ensure end of frame generated interrupts */ - - writel(BMCTL_RX_DIS|3,olympic_mmio+BMCTL_RWM); /* Yes, this the enables RX channel */ - - for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) { - - struct sk_buff *skb; - - skb=dev_alloc_skb(olympic_priv->pkt_buf_sz); - if(skb == NULL) - break; - - skb->dev = dev; - - olympic_priv->olympic_rx_ring[i].buffer = cpu_to_le32(pci_map_single(olympic_priv->pdev, - skb->data,olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)) ; - olympic_priv->olympic_rx_ring[i].res_length = cpu_to_le32(olympic_priv->pkt_buf_sz); - olympic_priv->rx_ring_skb[i]=skb; - } - - if (i==0) { - printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers. Adapter disabled\n",dev->name); - goto out; - } - - olympic_priv->rx_ring_dma_addr = pci_map_single(olympic_priv->pdev,olympic_priv->olympic_rx_ring, - sizeof(struct olympic_rx_desc) * OLYMPIC_RX_RING_SIZE, PCI_DMA_TODEVICE); - writel(olympic_priv->rx_ring_dma_addr, olympic_mmio+RXDESCQ); - writel(olympic_priv->rx_ring_dma_addr, olympic_mmio+RXCDA); - writew(i, olympic_mmio+RXDESCQCNT); - - olympic_priv->rx_status_ring_dma_addr = pci_map_single(olympic_priv->pdev, olympic_priv->olympic_rx_status_ring, - sizeof(struct olympic_rx_status) * OLYMPIC_RX_RING_SIZE, PCI_DMA_FROMDEVICE); - writel(olympic_priv->rx_status_ring_dma_addr, olympic_mmio+RXSTATQ); - writel(olympic_priv->rx_status_ring_dma_addr, olympic_mmio+RXCSA); - - olympic_priv->rx_ring_last_received = OLYMPIC_RX_RING_SIZE - 1; /* last processed rx status */ - olympic_priv->rx_status_last_received = OLYMPIC_RX_RING_SIZE - 1; - - writew(i, olympic_mmio+RXSTATQCNT); - -#if OLYMPIC_DEBUG - printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ)); - printk("RXCSA: %x, rx_status_ring[0]: %p\n",readl(olympic_mmio+RXCSA),&olympic_priv->olympic_rx_status_ring[0]); - printk(" stat_ring[1]: %p, stat_ring[2]: %p, stat_ring[3]: %p\n", &(olympic_priv->olympic_rx_status_ring[1]), &(olympic_priv->olympic_rx_status_ring[2]), &(olympic_priv->olympic_rx_status_ring[3]) ); - printk(" stat_ring[4]: %p, stat_ring[5]: %p, stat_ring[6]: %p\n", &(olympic_priv->olympic_rx_status_ring[4]), &(olympic_priv->olympic_rx_status_ring[5]), &(olympic_priv->olympic_rx_status_ring[6]) ); - printk(" stat_ring[7]: %p\n", &(olympic_priv->olympic_rx_status_ring[7]) ); - - printk("RXCDA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCDA),&olympic_priv->olympic_rx_ring[0]); - printk("Rx_ring_dma_addr = %08x, rx_status_dma_addr = %08x\n", - olympic_priv->rx_ring_dma_addr,olympic_priv->rx_status_ring_dma_addr) ; -#endif - - writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) | i,olympic_mmio+RXENQ); - -#if OLYMPIC_DEBUG - printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ)); - printk("RXCSA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCSA),&olympic_priv->olympic_rx_status_ring[0]); - printk("RXCDA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCDA),&olympic_priv->olympic_rx_ring[0]); -#endif - - writel(SISR_RX_STATUS | SISR_RX_NOBUF,olympic_mmio+SISR_MASK_SUM); - - /* setup tx ring */ - - writel(BMCTL_TX1_DIS,olympic_mmio+BMCTL_RWM); /* Yes, this enables TX channel 1 */ - for(i=0;i<OLYMPIC_TX_RING_SIZE;i++) - olympic_priv->olympic_tx_ring[i].buffer=cpu_to_le32(0xdeadbeef); - - olympic_priv->free_tx_ring_entries=OLYMPIC_TX_RING_SIZE; - olympic_priv->tx_ring_dma_addr = pci_map_single(olympic_priv->pdev,olympic_priv->olympic_tx_ring, - sizeof(struct olympic_tx_desc) * OLYMPIC_TX_RING_SIZE,PCI_DMA_TODEVICE) ; - writel(olympic_priv->tx_ring_dma_addr, olympic_mmio+TXDESCQ_1); - writel(olympic_priv->tx_ring_dma_addr, olympic_mmio+TXCDA_1); - writew(OLYMPIC_TX_RING_SIZE, olympic_mmio+TXDESCQCNT_1); - - olympic_priv->tx_status_ring_dma_addr = pci_map_single(olympic_priv->pdev, olympic_priv->olympic_tx_status_ring, - sizeof(struct olympic_tx_status) * OLYMPIC_TX_RING_SIZE, PCI_DMA_FROMDEVICE); - writel(olympic_priv->tx_status_ring_dma_addr,olympic_mmio+TXSTATQ_1); - writel(olympic_priv->tx_status_ring_dma_addr,olympic_mmio+TXCSA_1); - writew(OLYMPIC_TX_RING_SIZE,olympic_mmio+TXSTATQCNT_1); - - olympic_priv->tx_ring_free=0; /* next entry in tx ring to use */ - olympic_priv->tx_ring_last_status=OLYMPIC_TX_RING_SIZE-1; /* last processed tx status */ - - writel(0xffffffff, olympic_mmio+EISR_RWM) ; /* clean the eisr */ - writel(0,olympic_mmio+EISR) ; - writel(EISR_MASK_OPTIONS,olympic_mmio+EISR_MASK) ; /* enables most of the TX error interrupts */ - writel(SISR_TX1_EOF | SISR_ADAPTER_CHECK | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_ASB_FREE | SISR_ERR,olympic_mmio+SISR_MASK_SUM); - -#if OLYMPIC_DEBUG - printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM)); - printk("SISR MASK: %x\n",readl(olympic_mmio+SISR_MASK)); -#endif - - if (olympic_priv->olympic_network_monitor) { - u8 __iomem *oat; - u8 __iomem *opt; - u8 addr[6]; - oat = (olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr); - opt = (olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr); - - for (i = 0; i < 6; i++) - addr[i] = readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+i); - printk("%s: Node Address: %pM\n", dev->name, addr); - printk("%s: Functional Address: %02x:%02x:%02x:%02x\n",dev->name, - readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)), - readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1), - readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2), - readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3)); - - for (i = 0; i < 6; i++) - addr[i] = readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+i); - printk("%s: NAUN Address: %pM\n", dev->name, addr); - } - - netif_start_queue(dev); - return 0; - -out: - free_irq(dev->irq, dev); - return -EIO; -} - -/* - * When we enter the rx routine we do not know how many frames have been - * queued on the rx channel. Therefore we start at the next rx status - * position and travel around the receive ring until we have completed - * all the frames. - * - * This means that we may process the frame before we receive the end - * of frame interrupt. This is why we always test the status instead - * of blindly processing the next frame. - * - * We also remove the last 4 bytes from the packet as well, these are - * just token ring trailer info and upset protocols that don't check - * their own length, i.e. SNA. - * - */ -static void olympic_rx(struct net_device *dev) -{ - struct olympic_private *olympic_priv=netdev_priv(dev); - u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; - struct olympic_rx_status *rx_status; - struct olympic_rx_desc *rx_desc ; - int rx_ring_last_received,length, buffer_cnt, cpy_length, frag_len; - struct sk_buff *skb, *skb2; - int i; - - rx_status=&(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received + 1) & (OLYMPIC_RX_RING_SIZE - 1)]) ; - - while (rx_status->status_buffercnt) { - u32 l_status_buffercnt; - - olympic_priv->rx_status_last_received++ ; - olympic_priv->rx_status_last_received &= (OLYMPIC_RX_RING_SIZE -1); -#if OLYMPIC_DEBUG - printk("rx status: %x rx len: %x\n", le32_to_cpu(rx_status->status_buffercnt), le32_to_cpu(rx_status->fragmentcnt_framelen)); -#endif - length = le32_to_cpu(rx_status->fragmentcnt_framelen) & 0xffff; - buffer_cnt = le32_to_cpu(rx_status->status_buffercnt) & 0xffff; - i = buffer_cnt ; /* Need buffer_cnt later for rxenq update */ - frag_len = le32_to_cpu(rx_status->fragmentcnt_framelen) >> 16; - -#if OLYMPIC_DEBUG - printk("length: %x, frag_len: %x, buffer_cnt: %x\n", length, frag_len, buffer_cnt); -#endif - l_status_buffercnt = le32_to_cpu(rx_status->status_buffercnt); - if(l_status_buffercnt & 0xC0000000) { - if (l_status_buffercnt & 0x3B000000) { - if (olympic_priv->olympic_message_level) { - if (l_status_buffercnt & (1<<29)) /* Rx Frame Truncated */ - printk(KERN_WARNING "%s: Rx Frame Truncated\n",dev->name); - if (l_status_buffercnt & (1<<28)) /*Rx receive overrun */ - printk(KERN_WARNING "%s: Rx Frame Receive overrun\n",dev->name); - if (l_status_buffercnt & (1<<27)) /* No receive buffers */ - printk(KERN_WARNING "%s: No receive buffers\n",dev->name); - if (l_status_buffercnt & (1<<25)) /* Receive frame error detect */ - printk(KERN_WARNING "%s: Receive frame error detect\n",dev->name); - if (l_status_buffercnt & (1<<24)) /* Received Error Detect */ - printk(KERN_WARNING "%s: Received Error Detect\n",dev->name); - } - olympic_priv->rx_ring_last_received += i ; - olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ; - dev->stats.rx_errors++; - } else { - - if (buffer_cnt == 1) { - skb = dev_alloc_skb(max_t(int, olympic_priv->pkt_buf_sz,length)) ; - } else { - skb = dev_alloc_skb(length) ; - } - - if (skb == NULL) { - printk(KERN_WARNING "%s: Not enough memory to copy packet to upper layers.\n",dev->name) ; - dev->stats.rx_dropped++; - /* Update counters even though we don't transfer the frame */ - olympic_priv->rx_ring_last_received += i ; - olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ; - } else { - /* Optimise based upon number of buffers used. - If only one buffer is used we can simply swap the buffers around. - If more than one then we must use the new buffer and copy the information - first. Ideally all frames would be in a single buffer, this can be tuned by - altering the buffer size. If the length of the packet is less than - 1500 bytes we're going to copy it over anyway to stop packets getting - dropped from sockets with buffers smaller than our pkt_buf_sz. */ - - if (buffer_cnt==1) { - olympic_priv->rx_ring_last_received++ ; - olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1); - rx_ring_last_received = olympic_priv->rx_ring_last_received ; - if (length > 1500) { - skb2=olympic_priv->rx_ring_skb[rx_ring_last_received] ; - /* unmap buffer */ - pci_unmap_single(olympic_priv->pdev, - le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), - olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; - skb_put(skb2,length-4); - skb2->protocol = tr_type_trans(skb2,dev); - olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer = - cpu_to_le32(pci_map_single(olympic_priv->pdev, skb->data, - olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)); - olympic_priv->olympic_rx_ring[rx_ring_last_received].res_length = - cpu_to_le32(olympic_priv->pkt_buf_sz); - olympic_priv->rx_ring_skb[rx_ring_last_received] = skb ; - netif_rx(skb2) ; - } else { - pci_dma_sync_single_for_cpu(olympic_priv->pdev, - le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), - olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; - skb_copy_from_linear_data(olympic_priv->rx_ring_skb[rx_ring_last_received], - skb_put(skb,length - 4), - length - 4); - pci_dma_sync_single_for_device(olympic_priv->pdev, - le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), - olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; - skb->protocol = tr_type_trans(skb,dev) ; - netif_rx(skb) ; - } - } else { - do { /* Walk the buffers */ - olympic_priv->rx_ring_last_received++ ; - olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1); - rx_ring_last_received = olympic_priv->rx_ring_last_received ; - pci_dma_sync_single_for_cpu(olympic_priv->pdev, - le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), - olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; - rx_desc = &(olympic_priv->olympic_rx_ring[rx_ring_last_received]); - cpy_length = (i == 1 ? frag_len : le32_to_cpu(rx_desc->res_length)); - skb_copy_from_linear_data(olympic_priv->rx_ring_skb[rx_ring_last_received], - skb_put(skb, cpy_length), - cpy_length); - pci_dma_sync_single_for_device(olympic_priv->pdev, - le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), - olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; - } while (--i) ; - skb_trim(skb,skb->len-4) ; - skb->protocol = tr_type_trans(skb,dev); - netif_rx(skb) ; - } - dev->stats.rx_packets++ ; - dev->stats.rx_bytes += length ; - } /* if skb == null */ - } /* If status & 0x3b */ - - } else { /*if buffercnt & 0xC */ - olympic_priv->rx_ring_last_received += i ; - olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE - 1) ; - } - - rx_status->fragmentcnt_framelen = 0 ; - rx_status->status_buffercnt = 0 ; - rx_status = &(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received+1) & (OLYMPIC_RX_RING_SIZE -1) ]); - - writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) | buffer_cnt , olympic_mmio+RXENQ); - } /* while */ - -} - -static void olympic_freemem(struct net_device *dev) -{ - struct olympic_private *olympic_priv=netdev_priv(dev); - int i; - - for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) { - if (olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received] != NULL) { - dev_kfree_skb_irq(olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received]); - olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received] = NULL; - } - if (olympic_priv->olympic_rx_ring[olympic_priv->rx_status_last_received].buffer != cpu_to_le32(0xdeadbeef)) { - pci_unmap_single(olympic_priv->pdev, - le32_to_cpu(olympic_priv->olympic_rx_ring[olympic_priv->rx_status_last_received].buffer), - olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE); - } - olympic_priv->rx_status_last_received++; - olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1; - } - /* unmap rings */ - pci_unmap_single(olympic_priv->pdev, olympic_priv->rx_status_ring_dma_addr, - sizeof(struct olympic_rx_status) * OLYMPIC_RX_RING_SIZE, PCI_DMA_FROMDEVICE); - pci_unmap_single(olympic_priv->pdev, olympic_priv->rx_ring_dma_addr, - sizeof(struct olympic_rx_desc) * OLYMPIC_RX_RING_SIZE, PCI_DMA_TODEVICE); - - pci_unmap_single(olympic_priv->pdev, olympic_priv->tx_status_ring_dma_addr, - sizeof(struct olympic_tx_status) * OLYMPIC_TX_RING_SIZE, PCI_DMA_FROMDEVICE); - pci_unmap_single(olympic_priv->pdev, olympic_priv->tx_ring_dma_addr, - sizeof(struct olympic_tx_desc) * OLYMPIC_TX_RING_SIZE, PCI_DMA_TODEVICE); - - return ; -} - -static irqreturn_t olympic_interrupt(int irq, void *dev_id) -{ - struct net_device *dev= (struct net_device *)dev_id; - struct olympic_private *olympic_priv=netdev_priv(dev); - u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; - u32 sisr; - u8 __iomem *adapter_check_area ; - - /* - * Read sisr but don't reset it yet. - * The indication bit may have been set but the interrupt latch - * bit may not be set, so we'd lose the interrupt later. - */ - sisr=readl(olympic_mmio+SISR) ; - if (!(sisr & SISR_MI)) /* Interrupt isn't for us */ - return IRQ_NONE; - sisr=readl(olympic_mmio+SISR_RR) ; /* Read & Reset sisr */ - - spin_lock(&olympic_priv->olympic_lock); - - /* Hotswap gives us this on removal */ - if (sisr == 0xffffffff) { - printk(KERN_WARNING "%s: Hotswap adapter removal.\n",dev->name) ; - spin_unlock(&olympic_priv->olympic_lock) ; - return IRQ_NONE; - } - - if (sisr & (SISR_SRB_REPLY | SISR_TX1_EOF | SISR_RX_STATUS | SISR_ADAPTER_CHECK | - SISR_ASB_FREE | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_RX_NOBUF | SISR_ERR)) { - - /* If we ever get this the adapter is seriously dead. Only a reset is going to - * bring it back to life. We're talking pci bus errors and such like :( */ - if((sisr & SISR_ERR) && (readl(olympic_mmio+EISR) & EISR_MASK_OPTIONS)) { - printk(KERN_ERR "Olympic: EISR Error, EISR=%08x\n",readl(olympic_mmio+EISR)) ; - printk(KERN_ERR "The adapter must be reset to clear this condition.\n") ; - printk(KERN_ERR "Please report this error to the driver maintainer and/\n") ; - printk(KERN_ERR "or the linux-tr mailing list.\n") ; - wake_up_interruptible(&olympic_priv->srb_wait); - spin_unlock(&olympic_priv->olympic_lock) ; - return IRQ_HANDLED; - } /* SISR_ERR */ - - if(sisr & SISR_SRB_REPLY) { - if(olympic_priv->srb_queued==1) { - wake_up_interruptible(&olympic_priv->srb_wait); - } else if (olympic_priv->srb_queued==2) { - olympic_srb_bh(dev) ; - } - olympic_priv->srb_queued=0; - } /* SISR_SRB_REPLY */ - - /* We shouldn't ever miss the Tx interrupt, but the you never know, hence the loop to ensure - we get all tx completions. */ - if (sisr & SISR_TX1_EOF) { - while(olympic_priv->olympic_tx_status_ring[(olympic_priv->tx_ring_last_status + 1) & (OLYMPIC_TX_RING_SIZE-1)].status) { - olympic_priv->tx_ring_last_status++; - olympic_priv->tx_ring_last_status &= (OLYMPIC_TX_RING_SIZE-1); - olympic_priv->free_tx_ring_entries++; - dev->stats.tx_bytes += olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]->len; - dev->stats.tx_packets++ ; - pci_unmap_single(olympic_priv->pdev, - le32_to_cpu(olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_last_status].buffer), - olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]->len,PCI_DMA_TODEVICE); - dev_kfree_skb_irq(olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]); - olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_last_status].buffer=cpu_to_le32(0xdeadbeef); - olympic_priv->olympic_tx_status_ring[olympic_priv->tx_ring_last_status].status=0; - } - netif_wake_queue(dev); - } /* SISR_TX1_EOF */ - - if (sisr & SISR_RX_STATUS) { - olympic_rx(dev); - } /* SISR_RX_STATUS */ - - if (sisr & SISR_ADAPTER_CHECK) { - netif_stop_queue(dev); - printk(KERN_WARNING "%s: Adapter Check Interrupt Raised, 8 bytes of information follow:\n", dev->name); - writel(readl(olympic_mmio+LAPWWC),olympic_mmio+LAPA); - adapter_check_area = olympic_priv->olympic_lap + ((readl(olympic_mmio+LAPWWC)) & (~0xf800)) ; - printk(KERN_WARNING "%s: Bytes %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",dev->name, readb(adapter_check_area+0), readb(adapter_check_area+1), readb(adapter_check_area+2), readb(adapter_check_area+3), readb(adapter_check_area+4), readb(adapter_check_area+5), readb(adapter_check_area+6), readb(adapter_check_area+7)) ; - spin_unlock(&olympic_priv->olympic_lock) ; - return IRQ_HANDLED; - } /* SISR_ADAPTER_CHECK */ - - if (sisr & SISR_ASB_FREE) { - /* Wake up anything that is waiting for the asb response */ - if (olympic_priv->asb_queued) { - olympic_asb_bh(dev) ; - } - } /* SISR_ASB_FREE */ - - if (sisr & SISR_ARB_CMD) { - olympic_arb_cmd(dev) ; - } /* SISR_ARB_CMD */ - - if (sisr & SISR_TRB_REPLY) { - /* Wake up anything that is waiting for the trb response */ - if (olympic_priv->trb_queued) { - wake_up_interruptible(&olympic_priv->trb_wait); - } - olympic_priv->trb_queued = 0 ; - } /* SISR_TRB_REPLY */ - - if (sisr & SISR_RX_NOBUF) { - /* According to the documentation, we don't have to do anything, but trapping it keeps it out of - /var/log/messages. */ - } /* SISR_RX_NOBUF */ - } else { - printk(KERN_WARNING "%s: Unexpected interrupt: %x\n",dev->name, sisr); - printk(KERN_WARNING "%s: SISR_MASK: %x\n",dev->name, readl(olympic_mmio+SISR_MASK)) ; - } /* One if the interrupts we want */ - writel(SISR_MI,olympic_mmio+SISR_MASK_SUM); - - spin_unlock(&olympic_priv->olympic_lock) ; - return IRQ_HANDLED; -} - -static netdev_tx_t olympic_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct olympic_private *olympic_priv=netdev_priv(dev); - u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; - unsigned long flags ; - - spin_lock_irqsave(&olympic_priv->olympic_lock, flags); - - netif_stop_queue(dev); - - if(olympic_priv->free_tx_ring_entries) { - olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].buffer = - cpu_to_le32(pci_map_single(olympic_priv->pdev, skb->data, skb->len,PCI_DMA_TODEVICE)); - olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].status_length = cpu_to_le32(skb->len | (0x80000000)); - olympic_priv->tx_ring_skb[olympic_priv->tx_ring_free]=skb; - olympic_priv->free_tx_ring_entries--; - - olympic_priv->tx_ring_free++; - olympic_priv->tx_ring_free &= (OLYMPIC_TX_RING_SIZE-1); - writew((((readw(olympic_mmio+TXENQ_1)) & 0x8000) ^ 0x8000) | 1,olympic_mmio+TXENQ_1); - netif_wake_queue(dev); - spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); - return NETDEV_TX_OK; - } else { - spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); - return NETDEV_TX_BUSY; - } - -} - - -static int olympic_close(struct net_device *dev) -{ - struct olympic_private *olympic_priv=netdev_priv(dev); - u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*srb; - unsigned long t,flags; - - DECLARE_WAITQUEUE(wait,current) ; - - netif_stop_queue(dev); - - writel(olympic_priv->srb,olympic_mmio+LAPA); - srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800)); - - writeb(SRB_CLOSE_ADAPTER,srb+0); - writeb(0,srb+1); - writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); - - add_wait_queue(&olympic_priv->srb_wait,&wait) ; - set_current_state(TASK_INTERRUPTIBLE) ; - - spin_lock_irqsave(&olympic_priv->olympic_lock,flags); - olympic_priv->srb_queued=1; - - writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); - spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); - - while(olympic_priv->srb_queued) { - - t = schedule_timeout_interruptible(60*HZ); - - if(signal_pending(current)) { - printk(KERN_WARNING "%s: SRB timed out.\n",dev->name); - printk(KERN_WARNING "SISR=%x MISR=%x\n",readl(olympic_mmio+SISR),readl(olympic_mmio+LISR)); - olympic_priv->srb_queued=0; - break; - } - - if (t == 0) { - printk(KERN_WARNING "%s: SRB timed out. May not be fatal.\n",dev->name); - } - olympic_priv->srb_queued=0; - } - remove_wait_queue(&olympic_priv->srb_wait,&wait) ; - - olympic_priv->rx_status_last_received++; - olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1; - - olympic_freemem(dev) ; - - /* reset tx/rx fifo's and busmaster logic */ - - writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL); - udelay(1); - writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL); - -#if OLYMPIC_DEBUG - { - int i ; - printk("srb(%p): ",srb); - for(i=0;i<4;i++) - printk("%x ",readb(srb+i)); - printk("\n"); - } -#endif - free_irq(dev->irq,dev); - - return 0; - -} - -static void olympic_set_rx_mode(struct net_device *dev) -{ - struct olympic_private *olympic_priv = netdev_priv(dev); - u8 __iomem *olympic_mmio = olympic_priv->olympic_mmio ; - u8 options = 0; - u8 __iomem *srb; - struct netdev_hw_addr *ha; - unsigned char dev_mc_address[4] ; - - writel(olympic_priv->srb,olympic_mmio+LAPA); - srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800)); - options = olympic_priv->olympic_copy_all_options; - - if (dev->flags&IFF_PROMISC) - options |= 0x61 ; - else - options &= ~0x61 ; - - /* Only issue the srb if there is a change in options */ - - if ((options ^ olympic_priv->olympic_copy_all_options)) { - - /* Now to issue the srb command to alter the copy.all.options */ - - writeb(SRB_MODIFY_RECEIVE_OPTIONS,srb); - writeb(0,srb+1); - writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); - writeb(0,srb+3); - writeb(olympic_priv->olympic_receive_options,srb+4); - writeb(options,srb+5); - - olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */ - - writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); - - olympic_priv->olympic_copy_all_options = options ; - - return ; - } - - /* Set the functional addresses we need for multicast */ - - dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ; - - netdev_for_each_mc_addr(ha, dev) { - dev_mc_address[0] |= ha->addr[2]; - dev_mc_address[1] |= ha->addr[3]; - dev_mc_address[2] |= ha->addr[4]; - dev_mc_address[3] |= ha->addr[5]; - } - - writeb(SRB_SET_FUNC_ADDRESS,srb+0); - writeb(0,srb+1); - writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); - writeb(0,srb+3); - writeb(0,srb+4); - writeb(0,srb+5); - writeb(dev_mc_address[0],srb+6); - writeb(dev_mc_address[1],srb+7); - writeb(dev_mc_address[2],srb+8); - writeb(dev_mc_address[3],srb+9); - - olympic_priv->srb_queued = 2 ; - writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); - -} - -static void olympic_srb_bh(struct net_device *dev) -{ - struct olympic_private *olympic_priv = netdev_priv(dev); - u8 __iomem *olympic_mmio = olympic_priv->olympic_mmio ; - u8 __iomem *srb; - - writel(olympic_priv->srb,olympic_mmio+LAPA); - srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800)); - - switch (readb(srb)) { - - /* SRB_MODIFY_RECEIVE_OPTIONS i.e. set_multicast_list options (promiscuous) - * At some point we should do something if we get an error, such as - * resetting the IFF_PROMISC flag in dev - */ - - case SRB_MODIFY_RECEIVE_OPTIONS: - switch (readb(srb+2)) { - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name) ; - break ; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name); - break ; - default: - if (olympic_priv->olympic_message_level) - printk(KERN_WARNING "%s: Receive Options Modified to %x,%x\n",dev->name,olympic_priv->olympic_copy_all_options, olympic_priv->olympic_receive_options) ; - break ; - } /* switch srb[2] */ - break ; - - /* SRB_SET_GROUP_ADDRESS - Multicast group setting - */ - - case SRB_SET_GROUP_ADDRESS: - switch (readb(srb+2)) { - case 0x00: - break ; - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name); - break ; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name); - break ; - case 0x3c: - printk(KERN_WARNING "%s: Group/Functional address indicator bits not set correctly\n",dev->name) ; - break ; - case 0x3e: /* If we ever implement individual multicast addresses, will need to deal with this */ - printk(KERN_WARNING "%s: Group address registers full\n",dev->name) ; - break ; - case 0x55: - printk(KERN_INFO "%s: Group Address already set.\n",dev->name) ; - break ; - default: - break ; - } /* switch srb[2] */ - break ; - - /* SRB_RESET_GROUP_ADDRESS - Remove a multicast address from group list - */ - - case SRB_RESET_GROUP_ADDRESS: - switch (readb(srb+2)) { - case 0x00: - break ; - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name); - break ; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; - break ; - case 0x39: /* Must deal with this if individual multicast addresses used */ - printk(KERN_INFO "%s: Group address not found\n",dev->name); - break ; - default: - break ; - } /* switch srb[2] */ - break ; - - - /* SRB_SET_FUNC_ADDRESS - Called by the set_rx_mode - */ - - case SRB_SET_FUNC_ADDRESS: - switch (readb(srb+2)) { - case 0x00: - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Functional Address Mask Set\n",dev->name); - break ; - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name); - break ; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; - break ; - default: - break ; - } /* switch srb[2] */ - break ; - - /* SRB_READ_LOG - Read and reset the adapter error counters - */ - - case SRB_READ_LOG: - switch (readb(srb+2)) { - case 0x00: - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Read Log issued\n",dev->name) ; - break ; - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name); - break ; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; - break ; - - } /* switch srb[2] */ - break ; - - /* SRB_READ_SR_COUNTERS - Read and reset the source routing bridge related counters */ - - case SRB_READ_SR_COUNTERS: - switch (readb(srb+2)) { - case 0x00: - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Read Source Routing Counters issued\n",dev->name) ; - break ; - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name); - break ; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; - break ; - default: - break ; - } /* switch srb[2] */ - break ; - - default: - printk(KERN_WARNING "%s: Unrecognized srb bh return value.\n",dev->name); - break ; - } /* switch srb[0] */ - -} - -static int olympic_set_mac_address (struct net_device *dev, void *addr) -{ - struct sockaddr *saddr = addr ; - struct olympic_private *olympic_priv = netdev_priv(dev); - - if (netif_running(dev)) { - printk(KERN_WARNING "%s: Cannot set mac/laa address while card is open\n", dev->name) ; - return -EIO ; - } - - memcpy(olympic_priv->olympic_laa, saddr->sa_data,dev->addr_len) ; - - if (olympic_priv->olympic_message_level) { - printk(KERN_INFO "%s: MAC/LAA Set to = %x.%x.%x.%x.%x.%x\n",dev->name, olympic_priv->olympic_laa[0], - olympic_priv->olympic_laa[1], olympic_priv->olympic_laa[2], - olympic_priv->olympic_laa[3], olympic_priv->olympic_laa[4], - olympic_priv->olympic_laa[5]); - } - - return 0 ; -} - -static void olympic_arb_cmd(struct net_device *dev) -{ - struct olympic_private *olympic_priv = netdev_priv(dev); - u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; - u8 __iomem *arb_block, *asb_block, *srb ; - u8 header_len ; - u16 frame_len, buffer_len ; - struct sk_buff *mac_frame ; - u8 __iomem *buf_ptr ; - u8 __iomem *frame_data ; - u16 buff_off ; - u16 lan_status = 0, lan_status_diff ; /* Initialize to stop compiler warning */ - u8 fdx_prot_error ; - u16 next_ptr; - - arb_block = (olympic_priv->olympic_lap + olympic_priv->arb) ; - asb_block = (olympic_priv->olympic_lap + olympic_priv->asb) ; - srb = (olympic_priv->olympic_lap + olympic_priv->srb) ; - - if (readb(arb_block+0) == ARB_RECEIVE_DATA) { /* Receive.data, MAC frames */ - - header_len = readb(arb_block+8) ; /* 802.5 Token-Ring Header Length */ - frame_len = swab16(readw(arb_block + 10)) ; - - buff_off = swab16(readw(arb_block + 6)) ; - - buf_ptr = olympic_priv->olympic_lap + buff_off ; - -#if OLYMPIC_DEBUG -{ - int i; - frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ; - - for (i=0 ; i < 14 ; i++) { - printk("Loc %d = %02x\n",i,readb(frame_data + i)); - } - - printk("next %04x, fs %02x, len %04x\n",readw(buf_ptr+offsetof(struct mac_receive_buffer,next)), readb(buf_ptr+offsetof(struct mac_receive_buffer,frame_status)), readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length))); -} -#endif - mac_frame = dev_alloc_skb(frame_len) ; - if (!mac_frame) { - printk(KERN_WARNING "%s: Memory squeeze, dropping frame.\n", dev->name); - goto drop_frame; - } - - /* Walk the buffer chain, creating the frame */ - - do { - frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ; - buffer_len = swab16(readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length))); - memcpy_fromio(skb_put(mac_frame, buffer_len), frame_data , buffer_len ) ; - next_ptr=readw(buf_ptr+offsetof(struct mac_receive_buffer,next)); - } while (next_ptr && (buf_ptr=olympic_priv->olympic_lap + swab16(next_ptr))); - - mac_frame->protocol = tr_type_trans(mac_frame, dev); - - if (olympic_priv->olympic_network_monitor) { - struct trh_hdr *mac_hdr; - printk(KERN_WARNING "%s: Received MAC Frame, details:\n",dev->name); - mac_hdr = tr_hdr(mac_frame); - printk(KERN_WARNING "%s: MAC Frame Dest. Addr: %pM\n", - dev->name, mac_hdr->daddr); - printk(KERN_WARNING "%s: MAC Frame Srce. Addr: %pM\n", - dev->name, mac_hdr->saddr); - } - netif_rx(mac_frame); - -drop_frame: - /* Now tell the card we have dealt with the received frame */ - - /* Set LISR Bit 1 */ - writel(LISR_ARB_FREE,olympic_priv->olympic_mmio + LISR_SUM); - - /* Is the ASB free ? */ - - if (readb(asb_block + 2) != 0xff) { - olympic_priv->asb_queued = 1 ; - writel(LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM); - return ; - /* Drop out and wait for the bottom half to be run */ - } - - writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */ - writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */ - writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */ - writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */ - - writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM); - - olympic_priv->asb_queued = 2 ; - - return ; - - } else if (readb(arb_block) == ARB_LAN_CHANGE_STATUS) { /* Lan.change.status */ - lan_status = swab16(readw(arb_block+6)); - fdx_prot_error = readb(arb_block+8) ; - - /* Issue ARB Free */ - writel(LISR_ARB_FREE,olympic_priv->olympic_mmio+LISR_SUM); - - lan_status_diff = olympic_priv->olympic_lan_status ^ lan_status ; - - if (lan_status_diff & (LSC_LWF | LSC_ARW | LSC_FPE | LSC_RR) ) { - if (lan_status_diff & LSC_LWF) - printk(KERN_WARNING "%s: Short circuit detected on the lobe\n",dev->name); - if (lan_status_diff & LSC_ARW) - printk(KERN_WARNING "%s: Auto removal error\n",dev->name); - if (lan_status_diff & LSC_FPE) - printk(KERN_WARNING "%s: FDX Protocol Error\n",dev->name); - if (lan_status_diff & LSC_RR) - printk(KERN_WARNING "%s: Force remove MAC frame received\n",dev->name); - - /* Adapter has been closed by the hardware */ - - /* reset tx/rx fifo's and busmaster logic */ - - writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL); - udelay(1); - writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL); - netif_stop_queue(dev); - olympic_priv->srb = readw(olympic_priv->olympic_lap + LAPWWO) ; - printk(KERN_WARNING "%s: Adapter has been closed\n", dev->name); - } /* If serious error */ - - if (olympic_priv->olympic_message_level) { - if (lan_status_diff & LSC_SIG_LOSS) - printk(KERN_WARNING "%s: No receive signal detected\n", dev->name); - if (lan_status_diff & LSC_HARD_ERR) - printk(KERN_INFO "%s: Beaconing\n",dev->name); - if (lan_status_diff & LSC_SOFT_ERR) - printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame\n",dev->name); - if (lan_status_diff & LSC_TRAN_BCN) - printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n",dev->name); - if (lan_status_diff & LSC_SS) - printk(KERN_INFO "%s: Single Station on the ring\n", dev->name); - if (lan_status_diff & LSC_RING_REC) - printk(KERN_INFO "%s: Ring recovery ongoing\n",dev->name); - if (lan_status_diff & LSC_FDX_MODE) - printk(KERN_INFO "%s: Operating in FDX mode\n",dev->name); - } - - if (lan_status_diff & LSC_CO) { - - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Counter Overflow\n", dev->name); - - /* Issue READ.LOG command */ - - writeb(SRB_READ_LOG, srb); - writeb(0,srb+1); - writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); - writeb(0,srb+3); - writeb(0,srb+4); - writeb(0,srb+5); - - olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */ - - writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); - - } - - if (lan_status_diff & LSC_SR_CO) { - - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Source routing counters overflow\n", dev->name); - - /* Issue a READ.SR.COUNTERS */ - - writeb(SRB_READ_SR_COUNTERS,srb); - writeb(0,srb+1); - writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); - writeb(0,srb+3); - - olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */ - - writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); - - } - - olympic_priv->olympic_lan_status = lan_status ; - - } /* Lan.change.status */ - else - printk(KERN_WARNING "%s: Unknown arb command\n", dev->name); -} - -static void olympic_asb_bh(struct net_device *dev) -{ - struct olympic_private *olympic_priv = netdev_priv(dev); - u8 __iomem *arb_block, *asb_block ; - - arb_block = (olympic_priv->olympic_lap + olympic_priv->arb) ; - asb_block = (olympic_priv->olympic_lap + olympic_priv->asb) ; - - if (olympic_priv->asb_queued == 1) { /* Dropped through the first time */ - - writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */ - writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */ - writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */ - writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */ - - writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM); - olympic_priv->asb_queued = 2 ; - - return ; - } - - if (olympic_priv->asb_queued == 2) { - switch (readb(asb_block+2)) { - case 0x01: - printk(KERN_WARNING "%s: Unrecognized command code\n", dev->name); - break ; - case 0x26: - printk(KERN_WARNING "%s: Unrecognized buffer address\n", dev->name); - break ; - case 0xFF: - /* Valid response, everything should be ok again */ - break ; - default: - printk(KERN_WARNING "%s: Invalid return code in asb\n",dev->name); - break ; - } - } - olympic_priv->asb_queued = 0 ; -} - -static int olympic_change_mtu(struct net_device *dev, int mtu) -{ - struct olympic_private *olympic_priv = netdev_priv(dev); - u16 max_mtu ; - - if (olympic_priv->olympic_ring_speed == 4) - max_mtu = 4500 ; - else - max_mtu = 18000 ; - - if (mtu > max_mtu) - return -EINVAL ; - if (mtu < 100) - return -EINVAL ; - - dev->mtu = mtu ; - olympic_priv->pkt_buf_sz = mtu + TR_HLEN ; - - return 0 ; -} - -static int olympic_proc_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data) -{ - struct net_device *dev = (struct net_device *)data ; - struct olympic_private *olympic_priv=netdev_priv(dev); - u8 __iomem *oat = (olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr) ; - u8 __iomem *opt = (olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr) ; - int size = 0 ; - int len=0; - off_t begin=0; - off_t pos=0; - u8 addr[6]; - u8 addr2[6]; - int i; - - size = sprintf(buffer, - "IBM Pit/Pit-Phy/Olympic Chipset Token Ring Adapter %s\n",dev->name); - size += sprintf(buffer+size, "\n%6s: Adapter Address : Node Address : Functional Addr\n", - dev->name); - - for (i = 0 ; i < 6 ; i++) - addr[i] = readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr) + i); - - size += sprintf(buffer+size, "%6s: %pM : %pM : %02x:%02x:%02x:%02x\n", - dev->name, - dev->dev_addr, addr, - readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)), - readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1), - readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2), - readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3)); - - size += sprintf(buffer+size, "\n%6s: Token Ring Parameters Table:\n", dev->name); - - size += sprintf(buffer+size, "%6s: Physical Addr : Up Node Address : Poll Address : AccPri : Auth Src : Att Code :\n", - dev->name) ; - - for (i = 0 ; i < 6 ; i++) - addr[i] = readb(opt+offsetof(struct olympic_parameters_table, up_node_addr) + i); - for (i = 0 ; i < 6 ; i++) - addr2[i] = readb(opt+offsetof(struct olympic_parameters_table, poll_addr) + i); - - size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x : %pM : %pM : %04x : %04x : %04x :\n", - dev->name, - readb(opt+offsetof(struct olympic_parameters_table, phys_addr)), - readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+1), - readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+2), - readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+3), - addr, addr2, - swab16(readw(opt+offsetof(struct olympic_parameters_table, acc_priority))), - swab16(readw(opt+offsetof(struct olympic_parameters_table, auth_source_class))), - swab16(readw(opt+offsetof(struct olympic_parameters_table, att_code)))); - - size += sprintf(buffer+size, "%6s: Source Address : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame Correl : \n", - dev->name) ; - - for (i = 0 ; i < 6 ; i++) - addr[i] = readb(opt+offsetof(struct olympic_parameters_table, source_addr) + i); - size += sprintf(buffer+size, "%6s: %pM : %04x : %04x : %04x : %04x : %04x : %04x : \n", - dev->name, addr, - swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_type))), - swab16(readw(opt+offsetof(struct olympic_parameters_table, major_vector))), - swab16(readw(opt+offsetof(struct olympic_parameters_table, lan_status))), - swab16(readw(opt+offsetof(struct olympic_parameters_table, local_ring))), - swab16(readw(opt+offsetof(struct olympic_parameters_table, mon_error))), - swab16(readw(opt+offsetof(struct olympic_parameters_table, frame_correl)))); - - size += sprintf(buffer+size, "%6s: Beacon Details : Tx : Rx : NAUN Node Address : NAUN Node Phys : \n", - dev->name) ; - - for (i = 0 ; i < 6 ; i++) - addr[i] = readb(opt+offsetof(struct olympic_parameters_table, beacon_naun) + i); - size += sprintf(buffer+size, "%6s: : %02x : %02x : %pM : %02x:%02x:%02x:%02x : \n", - dev->name, - swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_transmit))), - swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_receive))), - addr, - readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)), - readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+1), - readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+2), - readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+3)); - - len=size; - pos=begin+size; - if (pos<offset) { - len=0; - begin=pos; - } - *start=buffer+(offset-begin); /* Start of wanted data */ - len-=(offset-begin); /* Start slop */ - if(len>length) - len=length; /* Ending slop */ - return len; -} - -static void __devexit olympic_remove_one(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev) ; - struct olympic_private *olympic_priv=netdev_priv(dev); - - if (olympic_priv->olympic_network_monitor) { - char proc_name[20] ; - strcpy(proc_name,"olympic_") ; - strcat(proc_name,dev->name) ; - remove_proc_entry(proc_name,init_net.proc_net); - } - unregister_netdev(dev) ; - iounmap(olympic_priv->olympic_mmio) ; - iounmap(olympic_priv->olympic_lap) ; - pci_release_regions(pdev) ; - pci_set_drvdata(pdev,NULL) ; - free_netdev(dev) ; -} - -static struct pci_driver olympic_driver = { - .name = "olympic", - .id_table = olympic_pci_tbl, - .probe = olympic_probe, - .remove = __devexit_p(olympic_remove_one), -}; - -static int __init olympic_pci_init(void) -{ - return pci_register_driver(&olympic_driver) ; -} - -static void __exit olympic_pci_cleanup(void) -{ - pci_unregister_driver(&olympic_driver) ; -} - - -module_init(olympic_pci_init) ; -module_exit(olympic_pci_cleanup) ; - -MODULE_LICENSE("GPL"); |